FTR-K1CK006W-MA中文资料
富士通继电器ftr-k1技术资料
FTR-K1 SERIESn FEATURESlPeak 80A inrush current (1 form A type)l Low profile (height: 15.7mm)l HIGH INSULATIONInsulation distance (between coil and contacts): 10mm min. Dielectric strength: 5KV Surge strength: 10KV l Class F coil wire l Low coil power (400mW)l Cadmium free contacts l SAFETY STANDARDSUL, CSA, VDE, SEMKO approvedUL, CSA TV-5 rating approved (1 form A type)l Flux proof, RTII l RoHS compliantPlease see page 6 for more informationActual marking does not carry the type name : "FTR"E.g.: Ordering code: FTR-K1CK012W Actual marking: K1CK012W(a) Relay typeFTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A (SPST-NO)C : 1 form C (SPDT) (standard type "K" only)(c) Coil type K: Standard type (400mW / Flux proof)(d) Coil rated voltage 012 : 5....110VDCCoil rating table at page 3(e) Contact material / TV type W : AgSnO 2 (1 form C contact type only)T : AgSnO 2 / TV-5 rated (1 form A / TV-5 contact type only) (f) Special type Nil : Standard type (without gold plate)BG: Gold plated 3µmn PARTNUMBER INFORMATIONFTR-K1 C K 012 W - BG [Example] (a) (b) (c) (d) (e) (f)SPECIFICATIONn* 2: Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental contionsn COIL RATINGNote: All values in the table are valid for 20°C and zero contact current. * Specified operate values are valid for pulse wave voltage.Type Compliance Contact ratingUL UL 508E63614FTR-K1CK ( ) W FTR-K1AK ( ) T Flammability: UL 94-V0 (plastics)16A, 277VAC/24VDC (resistive)20A, 277VAC (resistive)1 HP, 277VAC1/2 HP, 125VAC1/8 HP, 125VACTV-5, 120VAC, 25,000 cycles(only make contact)Pilot duty: B30016A, 24VAC (resistive)16A, 277VAC (resistive)20A, 277VAC (resistive)1 HP, 277VAC1/2 HP, 125VACTV-5, 120VAC 25,000 cyclesPilot duty: A300CSA C22.2 No. 14LR 40304VDE0435, 0631, 0700, 0860,4001384816A, 250VAC (cosφ=1), 85˚C3.5A, 250VAC (cosφ=0.4), 85˚C16 A 24VDC (0ms), 85˚C5A/80A, 250VAC 10,000 times, 85˚C (only make contact)SEMKO EN 61058-1:1992 and A1EN 61095:1993 and A1+A11250VAC, 16 (3)A 40T855A/80A 250VAC 40T85 (only make contact)n SAFETY STANDARDS Complies with NEMKO, DEMKO, FIMKOn CHARACTERISTIC DATAlDimensionsnDIMENSIONSUnit: mmlSchematics (BOTTOM VIEW)l PC board mountinghole layout(BOTTOM VIEW)FTR-K1AK ( ) TFTR-K1CK ( ) Wl DimensionslSchematics(BOTTOM VIEW)l PC board mountinghole layout(BOTTOM VIEW)1. General InformationlAll signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95ECincluding amendments.l Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005. (Amendment to Directive 2002/95/EC)l All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: /us/downloads/MICRO/fcai/relays/lead-free-letter.pdfl Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process.2. Recommended Lead Free Solder ProfilelRecommended solder Sn-3.0Ag-0.5Cu.RoHS Compliance and Lead Free Information3. Moisture SensitivitylMoisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.4. Tin WhiskerslDipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test.We highly recommend that you confirm your actual solder conditionsFlow Solder condition:Pre-heating: maximum 120˚CSoldering: dip within 5 sec. at260˚C solder bathSolder by Soldering Iron:Soldering IronTemperature: maximum 360˚C Duration: maximum 3 sec.JapanFujitsu Component LimitedGotanda-Chuo Building3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, JapanTel: (81-3) 5449-7010Fax: (81-3) 5449-2626Email: promothq@Web: North and South AmericaFujitsu Components America, Inc.250 E. Caribbean DriveSunnyvale, CA 94089 U.S.A.Tel: (1-408) 745-4900Fax: (1-408) 745-4970Email: components@Web: /components EuropeFujitsu Components Europe B.V.Diamantlaan 252132 WV HoofddorpNetherlandsTel: (31-23) 5560910Fax: (31-23) 5560950Email: info@Web: /components/Asia PacificFujitsu Components Asia Ltd.102E Pasir Panjang Road#01-01 Citilink Warehouse ComplexSingapore 118529Tel: (65) 6375-8560Fax: (65) 6273-3021Email: fcal@Web: /sg/services/micro/components/Fujitsu Components International Headquarter Offices©2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for gen-eral information purposes.The use of the contents, data and information provided in this datasheet is at the users’ own risk.Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehen-sive, complete and up to date.Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. July 28, 2010。
FTR-K1CK006T-LA中文资料
(d) Nominal Voltage
005 : 5 VDC,
006 : 6VDC, 009 : 9VDC
012 : 12VDC
018 : 18 VDC (standard type only) 022 :022VDC (standard type only),
024 : 24VDC,
Minimum 1,000 Mohms
Dielectric Strength
Between open contacts
1,000 VAC 1 minute
Between coil and contacts
5,000 VAC 1 minute
Surge Strength
10,000V (at 1.2 x 50 micro sec.)
-40° C to +85° C (no frost)
-40° C to +105° C (no frost)
Operate Time (without diode) Maximum 15ms (at nominal voltage, no bounce)
Release Time (without diode) Maximum 5ms (at nominal voltage, no bounce)
Life Other
FTR-K1CK ( ) W (Standard)
FTR-K1AK ( ) T FTR-K1AL ( ) W-LB
(Standard)
(High sensitive)
Arrangement
1 form C
1 form A
Material
Silver alloy
Resistance (initial)
FTR-K1AK024T-中文资料
Misoperation Endurance
Min. 100m/s2 (11±1ms) Min. 1,000m/s2 (6±1ms) Approximately 13g
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
Mechanical
20 x 106 operations minimum
Electrical
Vibration Resistance
AC contact rating 100 x 103 ops. minimum
100 x 103 ops. min.
DC contact rating 100 x 103 ops. min.
---
Lamp load (TV-5) ---
---
---
Misoperation
10 to 500 Hz, 5gn (double amplitude of 0.35mm) 10 to 55 Hz at double amplitude of 0.7mm
Endurance
10-55 Hz, (double amplitude of 1.5mm)
C
: 1 form C (SPDT) (standard type "K" only)
得捷电子 MT 系列微开关MT系列微小开关数据表说明书
MICRO SWITCH Miniature Toggle SwitchesMT SeriesDESCRIPTIONHoneywell MICRO SWITCH MT Series miniature toggle switches are designed to meet the need for a rugged, cost-effective toggle switch. Quality construction features include a seal between the toggle lever and bushing, and between the cover and case. These switches are designed for use inapplications in many demanding outdoor environments, where the panels are subjected to such things as vibration fromequipment, temperature extremes, dust, splashing water, and/or hose directed water.They are capable of withstanding exposure to heavyaccumulations of early morning dew that may condense on the control panel in cabs of vehicles left outdoors overnight. The MT toggle switches with metal or plastic levers are well suited for gloved-hand operation.The panel stand-off with O-ring feature available on some listings eliminates the need for behind-the-panel hardware, provides a uniform panel height, and a panel-to-cover seal.VALUE TO CUSTOMERS• Spring-loaded mechanism provides enhanced tactile feedback for toggle switch lever• High sealing level and electrical life cycle enable more uptime in field installations which helps in keeping machines working longer with less downtime• Small size allows for smaller control box/panel size to reduce weight and operator fatigueFEATURES• Miniature behind-panel size (case) enables overall control box or panel use• IEC 60529-2001, IP67, IP68 (except terminal parts) sealing for harsh-duty applications• Up to 60,000 electrical life that enhances the use time • Available with 8 circuitry options• 2- or 3- position maintained and momentary action to meet circuit and actuator requirements• UL recognized, CE certified for global usePOTENTIAL APPLICATIONSRemote control box of • Concrete pumping • Cranes• Material handling • Boom trucks• Any application with small panel constraintsDIFFERENTIATION• 60K life cycle offers an enhanced application life, keeping maintenance, replacement, and refurbishment at a minimum• High seal rating (IP68) to protect the toggle from water ingress and support more equipment uptimePORTFOLIOHoneywell offers an extensive line of MICRO SWITCH toggle switches, including the following Series: TL , NT , TW , TS , AT , and ET .Sensing and Internet of Things005437Issue 12 * These positions are momentary. All others are maintained.Sensing and Internet of Things 34 Figure 1. DImensions mm [in]2-Pole Switch7,291-Pole SwitchFigure 2. Panel CutoutPanel Cut-out005437-1-EN IL50 GLO December 2016© 2016 Honeywell International Inc. All rights reserved.m WARNINGPERSONAL INJURYDO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.Failure to comply with these instructions could result in death or serious injury.m WARNINGMISUSE OF DOCUMENTATION• The information presented in this product sheet is for reference only. Do not use this document as a product installation guide.•Complete installation, operation, and maintenanceinformation is provided in the instructions supplied with each product.Failure to comply with these instructions could result in death or serious injury.Find out moreHoneywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application as-sistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office.To learn more about Honeywell’s sensing and switching products, call +1-815-235-6847 or 1-800-537-6945,visit , or e-mail inquiries to *********************ADDITIONAL MATERIALSThe following associated literature is available on the Honeywell web site at :• Product installation instructions • Product range guide• Product application-specific informationHoneywell Sensing and Internet of Things 9680 Old Bailes Road Fort Mill, SC 29707 Warranty/RemedyHoneywell warrants goods of its manufacture as being free of defective materials and faulty workmanship during the appli-cable warranty period. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warrantedgoods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defec-tive. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.While Honeywell may provide application assistance personally, through our literature and the Honeywell web site, it is buyer’s sole responsibility to determine the suitability of the product in the application.Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this writing. However, Honeywell assumes no responsibility for its use.。
爱立信PDG24F0060E3WJ电源防御型电源筒电路保护器说明说明书
Eaton PDG24F0060E3WJEaton Power Defense molded case circuit breaker, Globally Rated, Frame 2, Four Pole (100% N), 60A, 25kA/480V, PXR20 LSIG w/ Modbus RTU, ZSI and Relays, Standard Line and Load (PDG2X4T100)General specificationsEaton Power Defense molded case circuit breakerPDG24F0060E3WJ 78667930073288.9 mm 152.4 mm 139.5 mm 2.46 kg Eaton Selling Policy 25-000, one (1) year from the date of installation of theProduct or eighteen (18) months from thedate of shipment of the Product,whichever occurs first.RoHS Compliant CCC MarkedCSAUL 489IEC 60947-2Product NameCatalog Number UPCProduct Length/Depth Product Height Product Width Product Weight WarrantyCompliancesCertifications60 AComplete breaker 2Four-pole (100% N)PD2 Global Class APXR 20 LSIG Modbus RTU600 Vac600 V100% neutral protectionStandard Line and Load25 kAIC at 480 Vac20 kAIC Icu/ 20 kAIC Ics/ 42 kAIC Icm @480V Brazil (IEC)10 kAIC Icu @125 Vdc10 kAIC Icu @250 Vdc35 kAIC Icu/ 35 kAIC Ics/ 73.5 kAIC Icm @240V (IEC)14 kAIC @600V (UL/CSA)25 kAIC @480V (UL)35 kAIC @240V (UL)18 kAIC Icu/ 15/13 kAIC Ics/ 37.8 kAIC Icm @525V South Africa (IEC)25 kAIC Icu/ 20 kAIC Ics/ 52.5 kAIC Icm @440V (IEC)25 kAIC Icu/ 25 kAIC Ics/ 52.5 kAIC Icm @380-415V (IEC)Eaton Power Defense MCCB PDG24F0060E3WJ 3D drawingConsulting application guide - molded case circuit breakers Power Xpert Protection Manager x32Power Xpert Protection Manager x64Power Defense brochurePower Defense molded case circuit breaker selection poster Power Defense technical selling bookletPower Defense molded case circuit breakers - Frame 2 product aidAmperage RatingCircuit breaker frame type FrameNumber of poles Circuit breaker type ClassTrip Type CommunicationVoltage ratingVoltage rating - maxProtectionTerminalsInterrupt rating Interrupt rating range 3D CAD drawing package Application notesBrochuresCatalogs60 A Power Xpert Release trip units for Power Defense molded case circuit breakersMolded case circuit breakers catalogPDG4 CCC certificationPDG4 CB reportEU Declaration of Conformity - Power Defense molded case circuit breakersPDG2 CB reportPower Defense Frame 2 box terminal (steel), 100A, 4 pole instructions - IL012234EN H04Power Defense Frame 2 clamp terminal (steel), 20A, 4 pole instructions - IL012246EN H04Power Defense Frame 2 box terminal (aluminum), 225A, 4 pole instructions - IL012235EN H04Power Defense Frame 2 tunnel terminal kits - PDG2X1TA225K instructions- IL012239EN H01Power Defense Frame 2 PDG2 and PDC(E)9 breaker instructions -IL012106ENPower Defense Frame 2 multi wire connector kit -PDG2X3(2)(4)TA2256W instructions - IL012242EN H01Power Defense Frame 2 shunt trip UVR instructions - IL012130EN Power Defense Frame 2 terminal kit - PDG2X3(2)(4)TA225RF instructions - IL012245EN H01Power Defense Frame 2 multi wire connector kit -PDG2X3(2)(4)TA2253W instructions - IL012243EN H01Power Defense Frame 2 tunnel terminal (aluminum), 150A, 4 pole instructions - IL012238EN H04Power Defense Frame 2 screw terminal_end cap kit, 225A, 3 pole instructions - IL012258EN H01Power Defense Frame 2 tunnel terminal (aluminum), 50A, 4 pole instructions - IL012236EN H04Power Defense Frame 2 Bell Alarm Switch Instructions (IL012154EN).pdf Power Defense Frame 2 bell alarm switch instructions - IL012154EN Power Defense Frame 2/3/4/5/6 voltage neutral sensor module wiring instructions – IL012316ENPower Defense Frame 1 IEC and Frame 2 Rotary Mechanism with NFPA Handle Attachment Instructions (IL012260EN).pdfPower Defense Frame 1-2-3-4 IP door barrier assembly instructions -IL012278ENPower Defense Frame 2 tunnel terminal (aluminum), 100A, 4 poleTrip ratingCertification reportsInstallation instructionsinstructions - IL012237EN H04Power Defense Frame 2 locking devices and handle block instructions - IL012149ENPower Defense Frame 2 global terminal shield, 4 pole - IL012330EN Power Defense Frame 2 terminal kit - PDG2X3(2)(4)TA150RF instructions - IL012244EN H01Installation videosPower Defense Frame 2 TMTU Aux, Alarm, ST and UVR Animated Instructions.rhPower Defense Frame 2 Bell Alarm with PXR Animated Instructions.pdf.rh Power Defense Frame 2 withTMTU, Shunt Trip_UVR Animated Instructions.rhMultimediaPower Defense Frame 3 Variable Depth Rotary Handle Mechanism Installation How-To VideoPower Defense Frame 2 Direct Rotary Handle Mechanism Installation How-To VideoPower Defense Frame 2 Aux, Alarm, Shunt Trip, and UVR How-To Video Power Defense Frame 2 Variable Depth Rotary Handle Mechanism Installation How-To VideoPower Defense molded case circuit breakersPower Defense Frame 6 Trip Unit How-To VideoEaton Power Defense for superior arc flash safetyPower Defense Frame 5 Trip Unit How-To VideoPower Defense BreakersSpecifications and datasheetsEaton Specification Sheet - PDG24F0060E3WJTime/current curvesPower Defense time current curve Frame 2 - PD2White papersMaking a better machineIntelligent circuit protection yields space savingsSingle and double break MCCB performance revisitedMolded case and low-voltage power circuit breaker healthIntelligent power starts with accurate, actionable dataMolded case and low-voltage breaker healthSafer by design: arc energy reduction techniquesEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。
海尔电器 1 CAT2125 扭矩钳 操作说明书
• Anticipate and be alert for sudden changes in motion during start up and operation of any power tool.
• Do not force tool beyond its rated capacity. • Do not remove any labels. Replace any
damaged labels.
Rev. 09/ctions • Warning Information • Parts Breakdown
• Operators and maintenance personnel must be physically able to handle the bulk, weight and power of this tool.
• Air under pressure can cause severe injury. Never direct air at yourself or others. Always turn off the air supply, drain hose of air pressure and detach tool from air supply before installing, removing or adjusting any accessory on this tool, or before performing any maintenance on this tool. Failure to do so could result in injury. Whip hoses can cause serious injury. Always check for damaged, frayed or loose hoses and fittings, and replace immediately. Do not use quick detach couplings at tool. See instructions for correct set-up.
FTR-K1AK018W-MA中文资料
FTR-K1CK ( ) W (Standard) 1 form C Silver alloy
FTR-K1AK ( ) T (Standard) 1 form A
FTR-K1AL ( ) W-LB (High sensitive)
Maximum 100mΩ (at 1A 6VDC) 16A, 250VAC/24VDC 16A 4,000VA / 384W 440VAC / 300VDC 10mA 5VDC 16A --400 mW -40° C to +85° C (no frost) 120VAC 78A(TV5) 10A --250 mW -40° C to +105° C (no frost) 10A 250VAC 10A 2,500VAC 440 VAC
Surge Strength Life Mechanical Electrical Other
DC contact rating 30 x 103 ops. min. Lamp load (TV-5) --Misoperation Endurance Misoperation Endurance
100 x 103 ops. min. ---
Between coil and 5,000 VAC 1 minute contacts 10,000V (at 1.2 x 50 micro sec.) 20 x 106 operations minimum AC contact rating 50 x 103 ops. minimum 100 x 103 ops. minimum 25 x 103 ops. min. 150 x 103 ops. min. (at 105 degrees) ---
FTR-K1 : FTR-K1 Series A C K L 005 018 024 W (SPST-NO) : 1 form C (SPDT) (standard type "K" only) : Standard (400 mW) / Flux free (16 A, 12A contacts only) : High Sensitive (250 mW)/ Flux free (10A, contacts only) : 5 VDC, 006 : 6VDC, : 18 VDC (standard type only) : 24VDC, 048 : 48VDC 009 : 9VDC 012 : 12VDC 022 :022VDC (standard type only),
防爆通讯设备
一、防爆通讯设备CHY-1型防爆扩音指令对讲电话机产品简介CHY-1型防爆扩音指令对讲电话机是组成CHY-Ⅰ、CHY-Ⅱ型扩音指令对讲系统的核心设备。
本产品防爆型式为隔爆兼本质安全型，与FHT-1配套使用构成电话站，两个或两个以上电话站通过总线电缆并联组成电话系统。
本机摘机后按住呼叫开关进行广播呼叫，松开呼叫开关进行对讲。
防爆标志：ExdibIIBT5防护等级：IP65产品特点◆外壳为铝合金材质铸造，抗撞击◆设置密封胶圈，防粉尘及抗潮湿◆手柄为ABS工程塑料注塑，抗撞击◆具有抗噪音功能，可在120dB噪声环境中使用◆机芯采用进口品牌元器件◆具有5话路选择工作方式，双向广播对讲◆具有动磁式摘机开关，使其性能稳定可靠◆双重呼叫开关◆具有摘挂机双色指示灯◆待机时话机脱离系统，省电节能◆输出功率0～25W可调，音质清晰，穿透力强◆电源输入及扬声器输出设有保护装置◆电源输入AC220V或AC120V◆具有与同类产品并网相互替换使用的能力◆通过GB3836-2000标准认证应用范围主要适用于工厂ⅡA、ⅡB等级、T5温度组别以下的爆炸性气体环境、高噪声环境、开阔地环境，是理想的调度通讯设备。
应用例子化工厂，电厂，钢厂，铁厂，焦化用厂等技术参数工作电压：AC220V或120V±10% 50Hz功率：30W频率特性：250～4000 Hz失真度：≤3%话路：5条呼叫线路：1条扩音输出功率：0～25W(连续可调)输出阻抗：8或16Ω传输信号幅度：0.3～1.5V（音频）安装方式：壁挂(室内、室外)进线口尺寸：G1"(2个)、G3/4"(1个)重量：约11kg外形尺寸：370×220×300(mm)使用环境环境温度：-30℃～+50℃相对湿度：≤95%RH(25℃)大气压力：80～110Kpa爆炸性气体混合物危险场所：1区、2区爆炸性气体混合物：ⅡA、ⅡB温度组别：T1～T5CHY-2型防爆扩音指令对讲电话机产品简介CHY-2型防爆扩音指令对讲电话机是组成CHY-Ⅰ、CHY-Ⅱ型扩音指令对讲系统的核心设备。
Mini-Mac Applicator 'KK' 终端机械说明书
Stripper Blade Holder Terminal Stop and Scrap Shield Terminal Track Base and Track
Stripper Retainer Block Conductor Adjusting Cam Mini-Mac Applicator Frame M3 by 8 Lg. SHCS M4 by 6 Lg. SHCS M4 by 12 Lg. SHCS M5 by 10 Lg. SHCS M8 by 25 Lg. BHCS #4-40 by .19” Lg. SHCS #6-32 by 1/4” Lg. SHCS #8-32 by .50” Lg. SHCS #10-32 by 1.120” Lg. SHCS Tool Kit (All “Y” Items)
CAUTION: Molex crimp specifications are valid only when used with Molex terminals, applicators and tooling.
Molex Application Tooling Group 1150 E. Diehl Road Naperville, IL 60563 Tel: (630) 969-4550 Fax: (630) 505-0049
FEATURES
Quick set-up time; plus the crimp height, track and feed adjustments can be preset in applicator
Conductor and insulation rings allow quick adjustment for conductor and insulation diameter change
美国爱立信电子有限公司PDG33K0600P9MJ电源防御模式载流量保护器说明说明书
Eaton PDG33K0600P9MJPower Defense Globally Rated, Frame 3, Three Pole, 600A, 50kA/480V, PXR25 LSIG Motor Protection w/ Modbus RTU and Relays, Std Line Load Term (PDG3X3TA630)Eaton Power Defense molded case circuit breakerPDG33K0600P9MJ 786679350232109.1 mm 257.1 mm 138.9 mm 5.92 kg Eaton Selling Policy 25-000, one (1) year from the date of installation of theProduct or eighteen (18) months from thedate of shipment of the Product,whichever occurs first.RoHS Compliant CCC MarkedCSAIEC 60947-2UL 489Product NameCatalog Number UPCProduct Length/Depth Product Height Product Width Product Weight WarrantyCompliancesCertificationsModbus / relays50 kAIC at 480 Vac3600600 AThree-pole600 VPD3 Global10 kAIC Icu @250 Vdc85 kAIC @240V (UL) ElectronicClass AComplete breakerStandard Line and Load600 VacPXR 25 Motor Protection LSIG Modbus RTU Eaton Power Defense MCCB PDG33K0600P9MJ 3D drawingConsulting application guide - molded case circuit breakersPower Xpert Protection Manager x64StrandAble terminals product aidPower Defense technical selling bookletPower Defense molded case circuit breaker selection posterPower Defense brochurePower Xpert Release trip units for Power Defense molded case circuit breakersMolded case circuit breakers catalogPDG3 CSA certification 100-400aPDG3B 450A-600A CB reportPDG3 UL authorization 250-600a PXRPDG3 UL authorization 100-400aPDG3 CSA certification 250-600aPDG3 45-400A CB reportPDG3 UL authorization 250-600a TMTUEU Declaration of Conformity - Power Defense molded case circuit breakersPower Defense Frame 3 interphase barrier - IL012229EN H03Power Defense Frame 1-2-3-4 IP door barrier assembly instructions -IL012278ENPower Defense Frame 3 shunt trip UVR instructions - IL012140EN Power Defense Frame 3 adapter kit installation instructions LZM3 to PD3 - IL012227ENPower Defense Frame 3 extendable shaft rotary handle mech -IL012112ENPower Defense Frame 3 trip unit replacement instructions - IL012157EN Power Defense Frame 3 finger protection assembly installation instructions - IL012279ENPower Defense Frame 3 reverse feed connector kit Cat NumPDG3X3(2)(4)TA400HRF instructions - IL012252ENSpecial featuresInterrupt ratingFrameRated operation voltage (Ue) at AC - max Amperage RatingNumber of polesVoltage rating - maxCircuit breaker typeInterrupt rating rangeSwitch off techniqueClassCircuit breaker frame typeTerminalsVoltage ratingTrip TypeCommunication 3D CAD drawing package Application notes BrochuresCatalogsCertification reports Installation instructionsPower Defense Frame 3 reverse feed connector kit Cat NumPDG3X3(2)(4)TA630RF instructions - IL012253ENPower Defense Frame 3 box terminal installation instructions -IL012299ENPower Defense Frame 3 screw terminal_end cap kit, 400A, 3 pole –IL012262ENPower Defense Frame 3 terminal cover assembly instructions -IL012281ENPower Defense Frame 3 terminal kit Cat Num PDG3X3(2)(4)TA400RF instructions - IL012251ENPower Defense Frame 3 multi wire connector kit -PDG3X3(2)(4)TA4006W and PDG3X3(2)(4)TA4003W instructions-IL012247EN H01Power Defense Frame 3 Direct Rotary Handle Assy With Interlock Version Instructions (IL012139EN).pdfPower Defense Frame 4 shunt trip UVR instructions - IL012129EN Power Defense Frame 3 Aux, Alarm, ST and UVR Animated Instructions.rh Power Defense Frame 3 rear connection installation instructions -IL012300ENPower Defense Frame 3 plug-in adapter installation instructions -IL012311ENPower Defense Frame 3 screw terminal end cap kit 600A, 3 pole -IL012264ENPower Defense Frame 3 Breaker Instructions (IL012107EN).pdfPower Defense Frame 2/3/4/5/6 voltage neutral sensor module wiring instructions – IL012316ENPower Defense Frame 3 terminal spreader assembly instructions -IL012301ENPower Defense Frame 3 locking devices and handle block instructions - IL012150ENPower Defense Frame 3 handle mech direct rotary handle instructions - IL012111ENPower Defense Frame 4 locking devices and handle block instructions - IL012151ENPower Defense Frame 3 interphase barriers 3-pole - IL012229EN H01 Power Defense Frame 4 reverse feed connector kit instructions for PDG4X3(2)(4)TA800RF instructions - IL012254ENPower Defense Frame 3 multi-tap terminal kit Cat NumPDG3X3(2)(4)TA6006W Instructions - IL012248ENPower Defense Frame 3 multi-tap terminal kit Cat NumPDG3X3(2)(4)TA6006WSW instructions - IL012250ENInstallation videosPower Defense Frame 3 Handle Mech Direct Rotary Handle AnimatedInstructions.rhPower Defense Frame 3 trip unit replacement animated instructions.rh Power Defense Frame 3 Handle Mech Variable Depth Rotary Handle Animated Instructions.rhPower Defense Frame 3 Shunt Trip_UVR Animated Instructions.pdf.rh Power Defense Frame 3 Locking Devices and Handle Block Animated Instructions.pdf.rhMultimediaPower Defense Frame 3 Aux, Alarm, Shunt Trip, and UVR How-To Video Power Defense Frame 3 Direct Rotary Handle Mechanism Installation How-To VideoPower Defense Frame 3 Trip Unit Installation How-To VideoPower Defense molded case circuit breakersPower Defense Frame 2 Variable Depth Rotary Handle Mechanism Installation How-To VideoEaton Power Defense for superior arc flash safetyPower Defense Frame 6 Trip Unit How-To VideoPower Defense Frame 5 Trip Unit How-To VideoPower Defense Frame 3 Variable Depth Rotary Handle Mechanism Installation How-To VideoPower Defense BreakersSpecifications and datasheetsEaton Specification Sheet - PDG33K0600P9MJTime/current curvesPower Defense time current curve Frame 3 - PD3White papersSingle and double break MCCB performance revisitedIntelligent circuit protection yields space savingsImplementation of arc flash mitigating solutions at industrial manufacturing facilitiesIntelligent power starts with accurate, actionable dataMolded case and low-voltage power circuit breaker healthMaking a better machineMolded case and low-voltage breaker healthSafer by design: arc energy reduction techniquesEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。
FTR-K1CK024W-中文资料
Misoperation Endurance
Min. 100m/s2 (11±1ms) Min. 1,000m/s2 (6±1ms) Approximately 13g
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
FTR-K1CK ( ) W-MA FTR-K1AK ( ) W-MA FTR-K1AL ( ) W-LA
(Standard)
(Standard)
(High sensitive)
1 form C
1 form A
Silver alloy
Maximum 100mΩ (at 1A 6VDC)
12A, 250VAC/24VDC
Shock Resistance
Weight
Misoperation Endurance
Min. 100m/s2 (11±1ms) Min. 1,000m/s2 (6±1ms) Approximately 13g
Life Other
FTR-K1CK ( ) W (Standard)
FTR-K1AK ( ) T FTR-K1AL ( ) W-LB
(Standard)
(High sensitive)
FTR-K1AK012W-MA中文资料
Actual marking does not carry the type name : "FTR"
E.g.: Ordering code: FTR-K1CK012W
Actual marking: K1CK012W
元器件交易网
FTR-K1 SERIES
n SAFETY STANDARD AND FILE NUMBERS
Nil :16A/5.0mm/-40 to +85˚C (standard type "K" only) -MA : 12A/3.5mm/-40 to +85˚C (standard type "K" only) -LA :10A/3.5mm/-40 to +85˚C (high sensitive "L" only) -LB :10A/5.0mm/-40 to +105˚C (high sensitive type "L" only)
10A 250VAC
14A
10A
3,000VA / 288W
2,500VAC
440VAC / 300VDC
440 VAC
10mA 5VDC
12A
10A
Minimum Inrush Current
---
---
---
Operating Temperature
-40° C to +85° C (no frost)
Resistance (at 500VDC)
Minimum 1,000 Mohms
Dielectric Strength
Between open contacts
酷蝶产品知识
酷蝶进线常见问题
音乐和视频支持什么格式的？ 答：音乐支持MP3和WAV格式，视频支持avi、MP4、3GP、wma格式。 支持rmvb播放格式么？ 答：需要去下载专门的播放软件。 系统可以升级么？ 答：不可以的。 怎么下载软件？ 答：系统自带安卓软件商店，或者自己到安卓论坛下载。 QQ、炒股、办公软件（支持2007还是2003的，是否可以编辑）、游戏这 些软件是否任意下载安装？ 答：QQ软件是内置，腾讯QQ有专门的android系统版本，可不断升级更新。 但目前android系统1.5版本不支持flash，因此部分QQ的功能不能使用。办公 软件支持2003的，可以编辑，但要注册，这些游戏和软件在可以在网上任意 下载安装的
酷蝶进线常见问题
QQ语音支持吗？邮箱怎么接收邮件？word文档能编辑和能否保存出 来？ 答：1）QQ不支持语音 2）邮箱 A:邮箱设置向导 a、按菜单键，弹出应用程序列表。 b、点击“Email”图标后，出现邮箱设置向导将帮助你进行设置。 c、点击“Next”按钮。 d、滑动打开键盘，输入你的邮箱账号的E-mail地址和密码 e、点击“Next”按钮，选择你的邮箱类型是POP3还是IMAP。 f、再点击“Next”按钮，来检查邮箱收发服务器是否可用。 g、如果邮箱可用，将会自动进入你的收件箱。
尺寸/ 重量/ 系统
产品重量 产品类型 产品尺寸 电源类型 电池类型 使用时间 操作系统 语言支持 0.348Kg 平板 191 MM *119 MM *14MM AC100-240V.50-60HZ DC9V 2A电源适配器 聚合物电池 7.4V 2１00mA/h Wifi 上网时间 3.5H, Google Android 1.6 支持69国语言 待机72H
K-9可选配件，微维克斯硬度试验机剪子订单号型号及描述说明书
G
steel ball 1471N(150kgf) beryllium copper, phosphor bronze
H
1/8”
588.4N(60kgf) Bearing metal
E
diameter 980.7N(100kgf)
K
steel ball 1471N(150kgf)
L
1/4”
588.4N(60kgf) Plastics, lead
50x50mm travel stage
Dimensions: 4.92x4.92”(125x125mm) Minimum reading: 0.01mm 810-012
Clamping devices (Vises)
Vise Max. opening: 1.77”(45mm) Standard for the MH series. 810-016
Indenters
Order No. 19BAA061 19BAA058 19BAA062 19BAA059 19BAA060
Type Knoop Indenter Vickers Indenter Knoop Indenter Vickers Indenter Vickers Indenter
Model H, HM Standard Series H, HM Standard Series MVK-H2, H3, HM114 MVK-H2, H3, HM114 HV, AVK-C Series
Micro-Vickers/Vickers Hardness Testing Machine
Test Blocks
Order No. 64BAA173 64BAA174 64BAA175 64BAA176 64BAA177 64BAA178 64BAA179 64BAA180 64BAA181 64BAA182 64BAA183 64BAA184 64BAA185 64BAA186 64BAA187 64BAA188 64BAA189 64BAA190 64BAA191 64BAA192 64BAA193 64BAA194 64BAA195 64BAA196 64BAA197 64BAA198 64BAA199 64BAA200 64BAA201 64BAA202 64BAA203 64BAA204 64BAA205 64BAA206 64BAA207 64BAA208 64BAA209 64BAA210 64BAA211 64BAA212 64BAA213 64BAA214 64BAA215 64BAA216 64BAA217 64BAA218 64BAA219 64BAA220
北京蓝卡产品介绍
运用在停车场中的900M 运用在停车场中的900M
北京蓝卡不停车收费停车场系统
2.4G远距离读卡器 2.4G远距离读卡器
工作条件：-20℃ 工作条件：-20℃~70 ℃相对湿 度≤90％ 90％ 工作频段：2.4GHZ 工作频段：2.4GHZ 读卡方式：有源卡主动发送数据， 读卡器接收数据。 读卡距离：12~70米（全向） 读卡距离：12~70米（全向） 1~170米（定向） 1~170米（定向） 识别速度：200Km/h 识别速度：200Km/h 通讯速率 ≤1ms
BP-2002K 坚固型汉字无线传输巡检器 BPBP-2002K属于无线上传数 BP-2002K属于无线上传数 据、无线下载参数、支持输 入的汉字机，环境温度 20℃～+70℃；相对湿度 20℃ +70℃ ≤90%。 90%。 外 观： 112mm×48mm×24mm。 112mm×48mm×24mm。 重 量：170±10g。 量：170±10g。 电 池：使用3.6V 900mAh 池：使用3.6V 充电锂离子电池。 信息存储量：4M/8M.可扩充 信息存储量：4M/8M.可扩充 （4M可存储2万条记录） 4M可存储2 配合BS-1000通讯座使用 配合BS-1000通讯座使用
BP2002H 汉字机
BP-2002H是一款带有112x64点阵， BP-2002H是一款带有112x64点阵， 7x4汉字，背光 7x4汉字，背光 屏幕、支持数字及 字母输入、可以设置下载参数的巡 检器。 BP2002H 汉字机使用环境 温度 -20℃～+70℃；相对湿度 20℃ +70℃ ≤90% 。使用3.6V 900mAh充电锂 。使用3.6V 900mAh充电锂 离子电池 ，信息存储量4M，可扩 ，信息存储量4M，可扩 充到32/64M,掉电不丢失 充到32/64M,掉电不丢失 数据。支 持BS-1000通讯座无线上传数据， BS-1000通讯座无线上传数据， 有线下载参数。
FTR-K3AB006W中文资料
Time Value
Operate (nominal coil voltage, without diode) Release (nominal coil voltage, without diode)
Maximum 20ms Maximum 20ms
Resistance
Minimum 1,000M , at 500 VDC
009 : 9VDC 024 : 24VDC 048 : 48VDC
W
: AgSnO2
Actual marking does not carry the type name : "FTR"
E.g.: Ordering code: FTR-K3JB024W
Actual marking: K3JB024W
Inrush 100VAC 200A (crest value); steady 20A; 3 x 104 operations minimum
Other
Vibration Misoperation (ref. value detection 1ms) 10 to 55 Hz double amplitude of 1.5mm
FTR-K3 Series FTR-K3 (A, J) B ( ) W 1M (1 Form A) AgSnO2 100m (at 1A 6VDC) 250VAC, 20A 25A 6,250 VA 250VAC 25A 100 mA, 5VDC 780mV
Nominal Voltage
5, 6, 9, 12, 18, 24, 48 V
8,500V
Life
Mechanical
20 x 105 operations minimum (18,000 operations/hr)
爱立信PDG23K0060P2WN电源防御模块型号的产品说明说明书
Eaton PDG23K0060P2WNEaton Power Defense molded case circuit breaker, Globally Rated, Frame 2, Three Pole, 60A, 50kA/480V, PXR25 LSI w/ Modbus RTU, ZSI and Relays, No TerminalsGeneral specificationsEaton Power Defense molded case circuit breakerPDG23K0060P2WN 78667932187488.9 mm 152.4 mm 104.6 mm 1.82 kg Eaton Selling Policy 25-000, one (1) year from the date of installation of theProduct or eighteen (18) months from thedate of shipment of the Product,whichever occurs first.RoHS Compliant CSAIEC 60947-2UL 489CCC MarkedProduct NameCatalog Number UPCProduct Length/Depth Product Height Product Width Product Weight WarrantyCompliancesCertificationsZSI / Modbus / Relays50 kAIC at 480 Vac260060 AThree-pole600 VPD2 Global25 kAIC @600V (UL/CSA)10 kAIC Icu @125 Vdc50 kAIC @480V (UL)85 kAIC Icu/ 85 kAIC Ics/ 187 kAIC Icm @240V (IEC)85 kAIC @240V (UL)10 kAIC Icu/ 5 kAIC Ics/ 21 kAIC Icm @690V (IEC)35 kAIC Icu/ 22.5 kAIC Ics/ 73.5 kAIC Icm @480V Brazil (IEC) 10 kAIC Icu @250 Vdc35 kAIC Icu/ 35 kAIC Ics/ 73.5 kAIC Icm @440V (IEC)30/25 kAIC Icu/ 15/13 kAIC Ics @525V South Africa (IEC)50 kAIC Icu/ 50 kAIC Ics/ 105 kAIC Icm @380-415V (IEC) ElectronicClass AComplete breakerNo Terminals600 Vac Eaton Power Defense MCCB PDG23K0060P2WN 3D drawingConsulting application guide - molded case circuit breakersPower Xpert Protection Manager x64Power Xpert Protection Manager x32Power Defense technical selling bookletPower Defense brochurePower Defense molded case circuit breaker selection posterPower Defense molded case circuit breakers - Frame 2 product aidMolded case circuit breakers catalogPower Xpert Release trip units for Power Defense molded case circuit breakersEU Declaration of Conformity - Power Defense molded case circuit breakersPDG4 CCC certificationPDG4 CB reportPDG2 CB reportPower Defense Declaration concerning California’s Proposition 65Power Defense Frame 2 global terminal shield, 3 pole - IL012330EN Power Defense Frame 2 bell alarm switch instructions - IL012154EN Power Defense Frame 2 Bell Alarm Switch Instructions (IL012154EN).pdf Power Defense Frame 2 shunt trip UVR instructions - IL012130EN Power Defense Frame 2 clamp terminal (steel), 20A, 3 pole instructions - IL012246EN H03Power Defense Frame 2 screw terminal_end cap kit, 225A, 3 pole instructions - IL012258EN H01Power Defense Frame 2 Direct Rotary Handle Assy With Interlock Version Instructions (IL012138EN).pdfPower Defense Frame 1-2-3-4 IP door barrier assembly instructions -IL012278ENPower Defense Frame 2 locking devices and handle block instructions - IL012149ENPower Defense Frame 2 PDG2 and PDC(E)9 breaker instructions -Special featuresInterrupt ratingFrameRated operation voltage (Ue) at AC - max Amperage RatingNumber of polesVoltage rating - maxCircuit breaker typeInterrupt rating rangeSwitch off techniqueClassCircuit breaker frame typeTerminalsVoltage rating 3D CAD drawing package Application notesBrochuresCatalogsCertification reports Installation instructionsPXR 25 LSI Modbus RTU IL012106ENPower Defense Frame 2 multi wire connector kit -PDG2X3(2)(4)TA2256W instructions - IL012242EN H01Power Defense Frame 2 tunnel terminal (aluminum), 150A, 3 pole instructions - IL012238EN H03Power Defense Frame 2 tunnel terminal (aluminum), 50A, 3 pole instructions - IL012236EN H03Power Defense Frame 1 IEC and Frame 2 Rotary Mechanism with NFPA Handle Attachment Instructions (IL012260EN).pdfPower Defense Frame 2 tunnel terminal (aluminum), 100A, 3 pole instructions - IL012237EN H03Power Defense Frame 2 box terminal (steel), 100A, 3 pole instructions - IL012234EN H03Power Defense Frame 2 box terminal (aluminum), 225A, 3 pole instructions - IL012235EN H03Power Defense Frame 2/3/4/5/6 voltage neutral sensor module wiring instructions – IL012316ENPower Defense Frame 2 handle mech variable depth rotary handle instructions - IL012136ENPower Defense Frame 2 handle mech direct rotary handle instructions - IL012134ENPower Defense Frame 2 multi wire connector kit -PDG2X3(2)(4)TA2253W instructions - IL012243EN H01Power Defense Frame 2 terminal kit - PDG2X3(2)(4)TA225RF instructions - IL012245EN H01Power Defense Frame 2 terminal kit - PDG2X3(2)(4)TA150RF instructions - IL012244EN H01Power Defense Frame 2 tunnel terminal kits - PDG2X1TA225K instructions- IL012239EN H01Power Defense Frame 2 Locking Devices and Handle Block Animated Instructions.pdf.rhPower Defense Frame 2 Handle Mech Variable Depth Rotary Handle Animated Instructions.rhPower Defense Frame 2 TMTU Aux, Alarm, ST and UVR Animated Instructions.rhPower Defense Frame 2 Bell Alarm with PXR Animated Instructions.pdf.rh Power Defense Frame 2 withTMTU, Shunt Trip_UVR Animated Instructions.rhPower Defense Frame 2 Aux, Alarm, Shunt Trip, and UVR How-To Video Power Defense Frame 2 Direct Rotary Handle Mechanism Installation How-To VideoTrip TypeCommunicationInstallation videosMultimediaEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaPower Defense Frame 3 Variable Depth Rotary Handle Mechanism Installation How-To VideoPower Defense Frame 2 Variable Depth Rotary Handle Mechanism Installation How-To VideoPower Defense molded case circuit breakers Power Defense BreakersPower Defense Frame 5 Trip Unit How-To Video Power Defense Frame 6 Trip Unit How-To Video Eaton Power Defense for superior arc flash safety Eaton Specification Sheet - PDG23K0060P2WN Power Defense time current curve Frame 2 - PD2Intelligent circuit protection yields space savings Single and double break MCCB performance revisited Making a better machineIntelligent power starts with accurate, actionable data Molded case and low-voltage power circuit breaker health Molded case and low-voltage breaker health Safer by design: arc energy reduction techniquesSpecifications and datasheetsTime/current curvesWhite papers。
2000-2001 Oriental Motor 步进电机一般目录 RFK说明书
RFKGENERAL CATALOGFeatures ·····························································B-164Specifications ·····················································B-167Speed vs.Torque Characteristics ························B-168Dimensions ·························································B-169List of Motor and Driver Combinations ···············B-170Wiring Diagram ···················································B-171Description of Input/Output Signals ····················B-1725-PHASE STEPPING MOTOR AND MICROSTEP DRIVER PACKAGERFKEASY WIRING PLC DIRECT RE -GENER -ATION PACK-AGEDCINPUTThe RFK uses 5-phase microstepping, the most advanced stepping motor drive technology available. It takes the basic 5-phase steppingmotor angle of 0.72˚ and divides it electrically into smaller step angles, providing up to 125,000 steps per revolution.ⅢMicrostepping Divides Steps Into as many as 250 UnitsNanoStep RFK enables step angles to be set independently on two resolution selection switches (16 resolutions, dividing into as many as 250 parts), it allows switching of the step angles by manipulating the external input step angle.Changing resolution can occur without any error when the motor is at rest .ⅢCompact DriverThe gate array and dual surface mount technologies utilized in this New Pentagon microstep driver have resulted in a driver that is only W 1.57in. (40mm) ϫ H 4.72in. (120mm) ϫ D 3.35in. (85mm).ⅢPhoenix ConnectorsPhoenix connectors are used for easy and secure attachment of the driver's input/output signal lines, motor lead wires and input power line.ⅢWhat is ?is a series of stepping motor and driver package that combines high-performance 5-phase microstep drivers with high-torque/low-vibration 5-phase stepping motors. They provide smoother and more precise operation than any stepping motor previously available.Ⅲ5-phase Microstep Drive TechnologyThe primary features of stepping motors are the ability to obtain precise positioning and the simplicity of design. They achieve this by rotating and stopping at step angle increments that aredetermined by the pole structure of the rotor and stator. Rotating in step angle increments, however, also produces changes in rotor speed and resonance at certain speeds that can cause vibration.Microstep driving provides a finer degree of control of the basic motor step angle by regulating the current sent to the motor coils,resulting in slow speeds, low-vibration and low-noise operation.●Since the basic motor step angle (0.72˚/full step) can be divided into proportions ranging from 1/1 to 1/250, smooth operation in fine increments is possible.●T echnology that changes the motor drive current smoothly suppresses motor vibration and makes operation quieter.ⅢRFK SYSTEM CONFIGURATIONA high-torque 5-phase stepping motor and driver are combined to make high-precision positioning with open loop control possible.ⅢACCESSORIES (Sold separately)RFK dedicated drivers include many functions for easy-of-use.Switches between 1-pulse input and 2-pulse input.ⅢPRODUCT NUMBER CODEA : Single ShaftB :Double Shaft4:1.65in. (42mm) sq.6:2.36in. (60mm) sq.USA VersionUse this value to compare motor torque performance. When using the motor with the included driver, the driver's "Automatic Current Cutback"function at motor standstill reduces maximum holding torque by approximately 50%.●The power source input current value represents the maximum current. (The input current varies according to the pulse frequency.)Note:Do not measure insulation resistance or perform the dielectric strength test while the motor and driver are connected for RFK54Ⅺtype.ⅢSPEED vs. TORQUE CHARACTERISTICSfs: Maximum Starting Pulse RateD r i v e r I n p u t C u r r e n t [A ]2Speed [r/min ]))T o r q u e [o z -i n ]T o r q u e [N ·m ]D r i v e r I n p u t C u r r e n t [A ]2 Speed [r/min ]))0.70.60.50.40.30.20.107654321RFK543AA RFK543BARFK564AA RFK564BARFK544AA RFK544BA RFK545AA RFK545BA RFK566AA RFK566BARFK569AA RFK569BANote:●Pay attention to heat dissipation from the motor and driver. The motor will produce a considerable amount of heat under certain conditions. Be sure to keep the temperature of the motor case under 212˚F (100˚C).●When using the motor with the dedicated driver, the driver's "Automatic Current Cutback" function at motor standstill reduces maximum holding torque by approximately 50%.D r i v e r I n p u t C u r r e n t [A ]2Speed [r/min ]))T o r q u e [o z -i n ]T o r q u e [N ·m ]D r i v e r I n p u t C u r r e n t [A ]2 Speed [r/min ]))1.41.21.00.80.60.40.207654321T o r q u e [o z -i n ]T o r q u e [N ·m ]D r i v e r I n p u t C u r r e n t [A ]2Speed [r/min ]))0.70.60.50.40.30.20.1076543210T o r q u e [o z -i n ]T o r q u e [N ·m ]D r i v e r I n p u t C u r r e n t [A ]2 Speed [r/min ]))3.02.52.01.51.00.507654321ⅢDIMENSIONS Scale 1/4, Unit = inch (mm)●MotorRFK543AA (Single shaft)Motor Model: PK543AUA Weight 0.56lb. (Mass 0.25kg)RFK543BA (Double shaft)Motor Model: PK543BUA Weight 0.56lb. (Mass 0.25kg)RFK564AA (Single shaft)Motor Model: PK564AUA Weight 1.33lb. (Mass 0.6kg)RFK564BA (Double shaft)Motor Model: PK564BUA Weight 1.33lb. (Mass 0.6kg)RFK544AA (Single shaft)Motor Model: PK544AUA Weight 0.67lb. (Mass 0.3kg)RFK544BA (Double shaft)Motor Model: PK544BUA Weight 0.67lb. (Mass 0.3kg)RFK566AA (Single shaft)Motor Model: PK566AUA Weight 1.77lb. (Mass 0.8kg)RFK566BA (Double shaft)Motor Model: PK566BUA Weight 1.77lb. (Mass 0.8kg)RFK545AA (Single shaft)Motor Model: PK545AUA Weight 0.89lb. (Mass 0.4kg)RFK545BA (Double shaft)Motor Model: PK545BUA Weight 0.89lb. (Mass 0.4kg)RFK569AA (Single shaft)Motor Model: PK569AUA Weight 2.87lb. (Mass 1.3kg)RFK569BA (Double shaft)Motor Model: PK569BUA Weight 2.87lb. (Mass 1.3kg)●These external appearance drawings are for double shaft models.For a single shaft, ignore the colored areas.See page B-36 for information on motor installation..1968 D I A .0.012)0NO. 4-40UNC✽.59Ϯ.01(15Ϯ0.25) indicates the length of milling on motor shaft.✽.59Ϯ.01(15Ϯ0.25) indicates the length of milling on motor shaft.✽.59Ϯ.01(15Ϯ0.25) indicates the length of milling on motor shaft.●DriverDriver: DFR1507A Weight: 0.8lb. (Mass 0.36kg)DFR1514ASee page B-38 for information on driver installation.Enter A(single shaft) or B(double shaft) in the Ⅺwithin the model numbers.ⅢWIRING DIAGRAMⅢPower SupplyUse a power supply that can supply sufficient input current.When power supply capacity is insufficient, a decrease in motor output can cause the following malfunctions:●Motor does not rotate properly at high-speed (insufficient torque)●Motor startup and stopping is slow.Note:●When voltage is above DC 5V, connect external resistance R 1 and keep the input current below 20mA.●If the current exceeds 10mA, connect external resistance R 2.●Use twisted-pair wire of 3.1ϫ10Ϫ4in 2(0.2mm 2) or thicker and 6.6 feet (2m) or less in length for the signal line.●Use wire 7.8ϫ10Ϫ4in 2(0.5mm 2) or thicker for motor lines (when extended) and power supply lines, and use 1.2ϫ10Ϫ3in 2(0.75mm 2) or thicker for the wire for the grounding line.●Use spot grounding for the grounding of the driver and external controller. ●Signal lines should be kept at least 3.94 inch (10cm) away from power lines (power supply lines and motor lines). Do not bind the signal line and power line together.Use open collector transistors (sink type) for the signal output sections of the controller.ⅢDESCRIPTION OF INPUT/OUTPUT SIGNALS1. Pulse InputⅢInput circuit and sample connectionThe shaded area indicates when the photocoupler diode is ON. The motor moves when the photocoupler state changes from ON to OFF as indicated by the arrow.1. 1-Pulse Input Mode Pulse Signal"Pulse" signal is input to the pulse signal terminal. When thephotocoupler state changes from "ON" to "OFF", the motor rotates one step. The direction of rotation is determined by the following rotation direction signal.Rotation Direction SignalThe "Rotation Direction" signal is input to the rotation direction signal input terminal. A "photocoupler ON" signal input commands a clockwise direction rotation. A "photocoupler OFF" signal input commands a counterclockwise direction rotation.2. 2-Pulse Input Mode CW Pulse SignalWhen the photocoupler state changes from "ON" to "OFF", the motor rotates one step in the clockwise W Pulse SignalWhen the photocoupler state changes from "ON" to "OFF", the motor rotates one step in the counterclockwise direction.CW and CCW refer to clockwise and counterclockwise direction respectively, from a reference point of facing the motor output shaft.2. A.W. OFF (All Windings Off) InputⅢInput circuit and sample connectionKeep the voltage between DC 5V and DC 24V.When voltage is equal to DC 5V, external resistance (R) is not necessary. When voltage is above DC 5V, connect external resistance (R) and keep the input current below 20mA.When the "All Windings Off" signal is in the "photocoupler ON" state, the current to the motor is cut off and motor torque is reduced to zero. The motor output shaft can then be rotated freely by hand.When the "All Windings Off" signal is in the "photocoupler OFF" state, the motor holding torque is proportional to the current set by the current adjustment rotary switches. During motor operation be sure to keep the signal in the "photocoupler OFF" state.This signal is used when moving the motor by external force or manual home position is desired. If this function is not needed, it is not necessary to connect this terminal.Switching the "All Windings Off" signal from "photocoupler ON" to"photocoupler OFF" does not alter the excitation sequence.When the motor shaft is manually adjusted with the "All Windings Off"signal input, the shaft will shift up to ע3.6˚ from the position set after the "All Windings Off" signal is released.Keep the voltage between DC 5V and DC 24V.When voltage is equal to DC 5V, external resistance (R) is not necessary. When voltage is above DC 5V, connect external resistance (R) and keep the input current below 20mA.ⅢPulse Signal Characteristics1µs Pulse SignalHome Position SetSignal ReleaseAll Windings OffSignalPhotocoupler ON Photocoupler OFF●The pulse voltage is 4~5V in the "photocoupler ON" state, and 0~0.5V in the "photocoupler OFF" state.●Input pulse signals should have a pulse width over 1µs, pulse rise/fall below 2µs,and a pulse duty below 50%.●Keep the pulse signal at "photocoupler OFF" when no pulse is being input.●The minimum interval time when changing rotation direction is 10µs.This value varies greatly depending on the motor type, pulse frequency, and load inertia. It may be necessary to increase this time interval.●In 1-pulse input mode, leave the pulse signal at rest ("photocoupler OFF") when changing rotation directions.ⅢManual Setting of the Home PositionInput the "All Windings Off" signal, set the motor to the desired position,then release the "All Windings Off" signal.Input Pulse characteristicsB-1732000-2001 ORIENTAL MOTOR GENERAL CATALOG3. R/S (Resolution Select Switching) InputⅢInput circuit and sample connectionKeep the voltage between DC 5V and DC 24V.When voltage is equal to DC 5V, external resistance (R) is not necessary. When voltage is above DC 5V, connect external resistance (R) and keep the input current below 20mA.When the "Resolution Select" signal is in the "photocoupler ON" state, the step angle set by resolution select switch RS1 is selected, and when the "Resolution Select" signal is in the "photocoupler OFF" state, the step angle set by resolution select switch RS2 is selected.This signal can be used to change the motor speed or amount of rotation without altering the input pulses.CW Rotation 0.072˚12 pulsesCCW Rotation 0.72˚1 pulse0.72˚4. TIMING (Excitation Timing)ⅢOutput Circuit and Sample ConnectionKeep the voltage between DC 5V and DC 24V.Keep the current below 10mA. If the current exceeds 10mA, connect external Resistance (R).CW PulseCCW Pulse Excitation Timing OutputNote:Input the "Resolution Select" signal when the driver power is off, or whenpulse signals are not being input. If the "Resolution Select" signal is input at other times, the excitation timing signal output may not function properly.The "Excitation Timing" signal is output to indicate when the motor excitation (current flowing through the winding) is in the initial stage (step "0" at power up).The "Excitation Timing" signal can be used to increase the accuracy of home position detection by setting the mechanical home position of your equipment (for example, a photo-sensor ) to coincide with the excitation sequence initial stage (step "0").The motor excitation stage changes simultaneously with pulse input, and returns to the initial stage for each 7.2˚ rotation of the motor output shaft.When power is turned ON, the excitation sequence is reset to step "0".The "Excitation Timing" signal is output once for each number of pulses equivalent to 7.2˚ divided by the step angle setting.Example: At a step angle setting of 0.72˚/step (Division of 1): The signalis output once every 10 pulsesAt a step angle setting of 0.072˚/step (Division of 10): The signal is output once every 100 pulsesWhen using the "Excitation Timing" signal, set the number of input pulses and the step angle in combinations which allow the motor shaft to stop at positions which are multiples of 7.2˚.When using the "Resolution Select" signal to change the step angle, be aware that depending on the number of pulses and step angle setting, there are conditions,such as those shown below, in which the "Excitation Timing" signal will not be output.B-1742000-2001 ORIENTAL MOTOR GENERAL CATALOG。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
n ORDERING INFORMATION
[Example]
(a) (b) (c) (d) (e) (f)
FTR-K1 C K 005 W (a) (b) (c) (d) (e)
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
– ** (f )
Series Name Contact Arrangement Coil Type / Enclosure Nominal Voltage Contact Material / TV type Contact rated / Terminal pitch/ Temperature range
Maximum Switching Current
Between coil and 5,000 VAC 1 minute contacts 10,000V (at 1.2 x 50 micro sec.) 20 x 106 operations minimum AC contact rating 100 x 103 ops. minimum 100 x 103 ops. min. ------DC contact rating 100 x 103 ops. min. Lamp load (TV-5) --Misoperation Endurance Misoperation Endurance
1
FTR-K1CK ( ) W-MA FTR-K1AK ( ) W-MA FTR-K1AL ( ) W-LA (Standard) (Standard) (High sensitive) 1 form C Silver alloy Maximum 100mΩ (at 1A 6VDC) 12A, 250VAC/24VDC 14A 3,000VA / 288W 440VAC / 300VDC 10mA 5VDC 12A -----40° C to +85° C (no frost) Maximum 15ms (at nominal voltage, no bounce) Maximum 5ms (at nominal voltage, no bounce) Minimum 1,000 Mohms 1,000 VAC 1 minute 10A --10A 250VAC 10A 2,500VAC 440 VAC 1 form A
Vibration Resistance Shock Resistance Weight
10 to 500 Hz, 5gn (double amplitude of 0.35mm) 10 to 55 Hz at double amplitude of 0.7mm 10-55 Hz, (double amplitude of 1.5mm) Min. 100m/s2 (11±1ms) Min. 1,000m/s2 (6±1ms) Approximately 13g
UL508, 873 (File No. E63614) C22.2 No.1and No. 14 (File No. LR40304) VDE 0435, 0631, 0700, 0860 SEMKO EN 610558-I, 61095
Type FTR-K1 16A type FTR-K1 10A type FTR-K1 TV-5
Nominal Voltage 5 to 48 VDC
Contact Rating 1/2 HP 125VAC/ 1HP 277VAC 16A 277VAC/24VDC resistive Pilot duty B300 1/3 HP 125VAC/ 1/2HP 277VAC 10A 277VAC/24VDC resistive Pilot duty B300 TV-5 120VAC 1/2 HP 125VAC/ 1HP 277VAC 16A 277VAC/24VDC resistive Pilot duty A300
FTR-K1 : FTR-K1 Series A C K L 005 018 024 W T Nil -MA -LA -LB : 1 form A (SPST-NO) : 1 form C (SPDT) (standard type "K" only) : Standard (400 mW) / Flux free (16 A, 12A contacts only) : High Sensitive (250 mW)/ Flux free (10A, contacts only) : 5 VDC, 006 : 6VDC, : 18 VDC (standard type only) : 24VDC, 048 : 48VDC 009 : 9VDC 012 : 12VDC 022 :022VDC (standard type only),
: AgSnO2 : AgSnO2 / TV-5 rated (1form A 16A type only) :16A/5.0mm/-40 to +85˚C (standard type "K" only) : 12A/3.5mm/-40 to +85˚C (standard type "K" only) :10A/3.5mm/-40 to +85˚C (high sensitive "L" only) :10A/5.0mm/-40 to +105˚C (high sensitive type "L" only)
Surge Strength Life Mechanical Electrical Other
DC contact rating 30 x 103 ops. min. Lamp load (TV-5) --Misoperatirance
100 x 103 ops. min. ---
1
FTR-K1CK ( ) W (Standard) 1 form C Silver alloy
FTR-K1AK ( ) T (Standard) 1 form A
FTR-K1AL ( ) W-LB (High sensitive)
Maximum 100mΩ (at 1A 6VDC) 16A, 250VAC/24VDC 16A 4,000VA / 384W 440VAC / 300VDC 10mA 5VDC 16A --400 mW -40° C to +85° C (no frost) 120VAC 78A(TV5) 10A --250 mW -40° C to +105° C (no frost) 10A 250VAC 10A 2,500VAC 440 VAC
Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-K1CK012W Actual marking: K1CK012W
元器件交易网
FTR-K1 SERIES
n SAFETY STANDARD AND FILE NUMBERS
Between coil and 5,000 VAC 1 minute contacts 10,000V (at 1.2 x 50 micro sec.) 20 x 106 operations minimum AC contact rating 50 x 103 ops. minimum 100 x 103 ops. minimum 25 x 103 ops. min. 150 x 103 ops. min. (at 105 degrees) ---
5 to 48 VDC
5 to 48 VDC
元器件交易网
FTR-K1 SERIES
n SPECIFICATIONS
It em Contact Arrangement Material Resistance (initial) Rating Maximum Carrying Current Maximum Switching Rating Maximum Switching Voltage Minimum Switching Load* Minimum Inrush Current Coil Power Operating Temperature Time Value Insulation Operate Time (without diode) Release Time (without diode) Resistance (at 500VDC) Dielectric Strength Between open contacts
元器件交易网
FTR-K1 SERIES
POWER RELAY
1 POLE - 16A LOW PROFILE TYPE RoHS compliant FTR-K1 Series
n FEATURES
l l
Low profile (height: 15.7mm) HIGH ISOLATION5 Insulation Distance (between coil and contacts: 10mm min.) Dielectric strength: 5KV Surge strength: 10KV l Class F coil l UL, Flammability 94V-0 l Cadmium free contacts l SAFETY STANDARDS UL, CSA, VDE, SEMKO approved UL, CSA TV-5 rating approved l RoHS Compliant since production