P4SMAJ170C中文资料
AOD413A 40V P-Channel MOSFET 数据手册说明书
Symbol V DS V GSI DM I AR E AR SymbolTyp Max 16.7254050R θJC23Continuous Drain B,HUnits Parameter T C =25°C T C =100°CAbsolute Maximum Ratings T A =25°C unless otherwise noted V T A =70°C Power Dissipation B Avalanche CurrentC Repetitive avalanche energy L=0.1mH C ID Pulsed Drain Current CVGate-Source Voltage Drain-Source Voltage Steady-StateT A =25°C P DSM T C =25°C Maximum Junction-to-Ambient A,G Steady-State Power Dissipation AP D T C =100°C °C/WThermal CharacteristicsParameterUnits Maximum Junction-to-Ambient A,Gt ≤ 10sR θJA °C/W °C/W Maximum Junction-to-CaseFGS DGSDSymbolMin TypMaxUnits BV DSS -40V -1T J =55°C-5I GSS ±100nA V GS(th)-1.7-2-3V I D(ON)-30A3644T J =125°C52655266g FS 22S V SD -0.76-1V I S-12A C iss 9001125pF C oss 97pF C rss 68pF R g14ΩQ g (-10V)16.221nC Q g (-4.5V)7.29.4nC Q gs 3.8nC Q gd 3.5nC t D(on) 6.2ns t r 8.4ns t D(off)44.8ns t f 41.2ns t rr 21.2ns Q rr13.8nC -20COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,FUNCTIONS AND RELIABILITY WITHOUT NOTICE.20Gate Source Charge Gate resistanceV GS =0V, V DS =0V, f=1MHzV GS = -10V, V DS = -20V,I D = -12ATotal Gate Charge m ΩTurn-On Rise Time Turn-Off DelayTime V GS = -10V, V DS = -20V, R L =1.6Ω,R GEN =3ΩTurn-Off Fall TimeTurn-On DelayTime Gate Drain Charge V GS =0V, V DS = -20V, f=1MHz SWITCHING PARAMETERS Total Gate Charge V GS = -4.5V, I D = -8AI S = -1A,V GS =0VV DS = -5V, I D = -12A Maximum Body-Diode Continuous CurrentInput Capacitance Output CapacitanceDYNAMIC PARAMETERS R DS(ON)Static Drain-Source On-ResistanceForward Transconductance Diode Forward VoltageElectrical Characteristics (T J =25°C unless otherwise noted)STATIC PARAMETERS ParameterConditions I DSS µA Body Diode Reverse Recovery Charge I F = -12A, dI/dt=100A/µsBody Diode Reverse Recovery TimeV GS = -10V, I D = -12AReverse Transfer Capacitance I F = -12A, dI/dt=100A/µsGate Threshold Voltage V DS =V GS I D = -250µA Drain-Source Breakdown Voltage On state drain currentI D = -250µA, V GS =0V V GS = -10V, V DS = -5V V DS = -40V, V GS =0VV DS =0V, V GS = ±20V Zero Gate Voltage Drain Current Gate-Body leakage current A: The value of R θJA is measured with the device in a still air environment with T A =25°C. The power dissipation P DSM and current rating I DSM are based on T J(MAX)=150°C, using t ≤ 10s junction-to-ambient thermal resistance.B. The power dissipation P D is based on T J(MAX)=175°C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used.C: Repetitive rating, pulse width limited by junction temperature T J(MAX)=175°C.D. The R θJA is the sum of the thermal impedence from junction to case R θJC and case to ambient.E. The static characteristics in Figures 1 to 6 are obtained using <300 µs pulses, duty cycle 0.5% max.F. These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink, assuminga maximum junction temperature of T J(MAX)=175°C. The SOA curve provides a single pulse ratin g.G. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with T A =25°C.H. The maximum current rating is limited by bond-wires.*This device is guaranteed green after data code 8X11 (Sep 1ST 2008).Rev4: April 2011VdsChargeGate Charge Test Circuit & WaveformVddVdsIdVgsUnclamped Inductive Switching (UIS) Test Circuit & Waveforms2E = 1/2 LI AR ARBV DSSI ARVdd VddResistive Switching Test Circuit & Waveforms90%10%。
5.0SMLJ22CA中文资料
FeaturesMechanical DataTerminals: solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end( cathode) exceptBi-directional types.Standard packaging: 16mm tape per ( EIA 481). Weight: 0.007 ounce, 0.21 gramMaximum Ratings @ 25o C Unless Otherwise SpecifiedPeak Pulse Current on 10/1000uswaveform(Note1, Fig3)I PPM See Table 1Amps Peak Pulse Power Disspation on 10/1000us waveform(Note1,2,Fig1)P PPMMinimum 5000Watts Peak forward surge current (JEDEC Method) (Note 2,3)I FSM)300.0Amps Operation And Storage Temperature Range T J ,T STG -55o C to +150o CNOTES:1.Non-repetitive current pulse per Fig.3 and derated above TA=25oC per Fig.2.2.Mounted on 8.0mm 2copper pads to each terminal.3.8.3ms, single half sine-wave or equivalent square wave, duty cycle=4 pulses per. Minutes maximum.For surface mount application in order to optimize board space Low inductance Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Repetition Rate( duty cycle): 0.01%Fast response time: typical less than 1ps from 0V to BV min Typical I D less than 1uA above 10VHigh temperature soldering: 250oC/10 seconds at terminals Plastic package has Underwrites Laboratory FlammabilityClassification 94V-Oomp onents 20736 Marilla Street Chatsworth! "# $ % ! "#Revision: 1 2006/10/18 UL Recognized File # E222849TMMicro Commercial ComponentsCase Material: Molded Plastic. UL Flammability Classification Rating 94V-0www.mccsemi .com1 of 4MAXIMUM CLAMPING VOLTAGE REVERSE LEAKAGE @Ipp @V RWM Vc(V)I D (µA)5.0SMLJ 11A 1112.213.51018.22758005PEN 5.0SMLJ 12A 1213.314.71019.92528005PEP 5.0SMLJ 13A 1314.415.91021.52335005PEQ 5.0SMLJ 14A 1415.617.21023.22162005PER 5.0SMLJ 15A 1516.718.5124.42051005PES 5.0SMLJ 16A 1617.819.7126193505PET 5.0SMLJ 17A 1718.920.9127.6181205PEU 5.0SMLJ 18A 182022.1129.2172105PEV 5.0SMLJ 20A 2022.224.5132.415555PEW 5.0SMLJ 22A 2224.426.9135.514155PEX 5.0SMLJ 24A 2426.729.5138.912955PEZ 5.0SMLJ 26A 2628.931.9142.111955PFE 5.0SMLJ 28A 2831.134.4145.411055PFG 5.0SMLJ 30A 3033.336.8148.410355PFK 5.0SMLJ 33A 3336.740.6153.393.955PFM 5.0SMLJ 36A 364044.2158.186.155PFP 5.0SMLJ 40A 4044.449.1164.577.655PFR 5.0SMLJ 43A 4347.852.8169.472.155PFT 5.0SMLJ 45A 455055.3172.768.855PFV 5.0SMLJ 48A 4853.358.9177.464.755PFX 5.0SMLJ 51A 5156.762.7182.460.755PFZ 5.0SMLJ 54A 546066.3187.157.555RGE 5.0SMLJ 58A 5864.471.2193.653.555PGG 5.0SMLJ 60A 6066.773.7196.851.755PGK 5.0SMLJ 64A 6471.178.6110348.655PGM 5.0SMLJ 70A 7077.886111344.355PGP 5.0SMLJ 75A 7583.392.1112141.455PGR 5.0SMLJ 78A 7886.795.8112639.755PGT 5.0SMLJ 85A 8594.4104113736.555PGV 5.0SMLJ 90A 90100111114634.355PGX 5.0SMLJ 100A 100111123116230.955PGZ 5.0SMLJ 110A 110122135117728.355PHE 5.0SMLJ 120A 12013314711932655PHG 5.0SMLJ 130A 13014415912092455PHK 5.0SMLJ 150A 150167185124320.655PHM 5.0SMLJ 160A 160178197125919.355PHP 5.0SMLJ 170A170189209127518.255PHRDEVICE MARKING CODE PART NUMBERPEAK PULSE CURRENT Ipp (A)TEST CURRENT I T (mA)BREAKDOWNVOLTAGE V BR (V)MAX.@ITBREAKDOWN VOLTAGEV BR (V)MIN.@IT REVERSE STAND- OFF VOLTAGE V RWM (V)TMMicro Commercial Components5.0SMLJ11A~5.0SMLJ170Awww.mccsemi .com2 of 4Revision: 1 2006/10/18MAXIMUM CLAMPING VOLTAGE REVERSE LEAKAGE @Ipp @V RWM Vc(V)I D (µA)5.0SMLJ 11CA 1112.213.51018.22758005BEN 5.0SMLJ 12CA 1213.314.71019.92528005BEP 5.0SMLJ 13CA 1314.415.91021.52335005BEQ 5.0SMLJ 14CA 1415.617.21023.22162005BER 5.0SMLJ 15CA 1516.718.5124.42051005BES 5.0SMLJ 16CA 1617.819.7126193505BET 5.0SMLJ 17CA 1718.920.9127.6181205BEU 5.0SMLJ 18CA 182022.1129.2172105BEV 5.0SMLJ 20CA 2022.224.5132.415555BEW 5.0SMLJ 22CA 2224.426.9135.514155BEX 5.0SMLJ 24CA 2426.729.5138.912955BEZ 5.0SMLJ 26CA 2628.931.9142.111955BFE 5.0SMLJ 28CA 2831.134.4145.411055BFG 5.0SMLJ 30CA 3033.336.8148.410355BFK 5.0SMLJ 33CA 3336.740.6153.393.955BFM 5.0SMLJ 36CA 364044.2158.186.155BFP 5.0SMLJ 40CA 4044.449.1164.577.655BFR 5.0SMLJ 43CA 4347.852.8169.472.155BFT 5.0SMLJ 45CA455055.3172.768.855BFVPART NUMBERREVERSE STAND- OFF VOLTAGE V RWM (V)BREAKDOWN VOLTAGEV BR (V)MIN.@IT BREAKDOWNVOLTAGE V BR (V)MAX.@ITTEST CURRENT I T (mA)PEAK PULSE CURRENT Ipp (A)DEVICE MARKING CODE TMMicro Commercial Components5.0SMLJ11C A~5.0SMLJ 45C AFor Bidirectional type having Vrwm of 20 volts and less,the Ir limit is double.www.mccsemi .com3 of 4Revision: 1 2006/10/18Revision: 12006/10/18Micro Commercial Componentswww.mccsemi .com4 of 4products are represented on our website, harmless against all damages.***APPLICATIONS DISCLAIMER******IMPORTANT NOTICE***Aerospace or Military Applications.Products offer by Micro Commercial Components Corp .are not intended for use in Medical,Micro Commercial Components Corp .reserve s the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes .Micro Commercial Components Corp .does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp .and all the companies whose。
SMAJ14CA中文资料
t, TIME (ms) Fig. 4 Pulse Waveform
Ordering Information
Device
(Note 4) Packaging SMA Shipping 5000/Tape & Reel
SMAJXXX(C)A-13 Notes:
4. For Packaging Details, go to our website at /datasheets/ap02007.pdf.
1. Valid provided that terminals are kept at ambient temperature. 2. Measured with 8.3ms single half sine-wave. Duty cycle = 4 pulses per minute maximum. 3. Unidirectional units only.
DS19005 Rev. 9 - 2
1 of 3
SMAJ5.0(C)A - SMAJ170(C)A
元器件交易网
Part Number Add C For Bi-Directional (Note 4) SMAJ5.0(C)A SMAJ6.0(C)A SMAJ6.5(C)A SMAJ7.0(C)A SMAJ7.5(C)A SMAJ8.0(C)A SMAJ8.5(C)A SMAJ9.0(C)A SMAJ10(C)A SMAJ11(C)A SMAJ12(C)A SMAJ13(C)A SMAJ14(C)A SMAJ15(C)A SMAJ16(C)A SMAJ17(C)A SMAJ18(C)A SMAJ20(C)A SMAJ22(C)A SMAJ24(C)A SMAJ26(C)A SMAJ28(C)A SMAJ30(C)A SMAJ33(C)A SMAJ36(C)A SMAJ40(C)A SMAJ43(C)A SMAJ45(C)A SMAJ48(C)A SMAJ51(C)A SMAJ54(C)A SMAJ58(C)A SMAJ60(C)A SMAJ64(C)A SMAJ70(C)A SMAJ75(C)A SMAJ78(C)A SMAJ85(C)A SMAJ90(C)A SMAJ100(C)A SMAJ110(C)A SMAJ120(C)A SMAJ130(C)A SMAJ150(C)A SMAJ160(C)A SMAJ170(C)A Reverse Standoff Voltage VRWM (V) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 Breakdown Voltage VBR @ IT (Note 5) Min (V) 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100 111 122 133 144 167 178 189 Max (V) 7.25 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104 111 123 135 147 159 185 197 209 Test Current IT(mA) 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max. Reverse Leakage @ VRWM (Note 6) IR (mA) 800 800 500 200 100 50 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Max. Clamping Max. Peak Pulse Current Voltage @ Ipp I
硕凯电子SOCAY瞬态二极管SMAJ170CA型号特征说明
硕凯电子SOCAY瞬态二极管SMAJ170CA型号特征说明
硕凯电子（Sylvia）
一、产品图
1、为表面安装应用优化电路板空间
2、低泄漏
3、双向单元
4、玻璃钝化结
5、低电感
6、优良的钳位能力
7、400W的峰值功率能力在10×1000μ波形重复率（占空比）：0.01%
8、快速响应时间：从0伏特到最小击穿电压通常小于1.0ps
9、典型的，在电压高于12V时，反向漏电流小于5μA
10、高温焊接：终端260°C/40秒
11、典型的最大温度系数△Vbr=0.1%x Vbr@25°C x△T
12、塑料包装有保险商实验室可燃性94V-0
13、无铅镀雾锡
14、无卤化，符合RoHS
15、典型失效模式是在指定的电压或电流下出现
16、晶须测试是基于JEDEC JESD201A每个表4a及4c进行的
17、IEC-61000-4-2ESD15kV(空气)，8kV(接触)
18、数据线的ESD保护符合IEC61000-4-2(IEC801-2)
19、数据线的EFT保护符合IEC61000-4-4(IEC801-4)
三、应用范围
TVS器件非常适合保护I/O接口，Vcc总线和其他应用于电信、计算机、工业和消费电子应用的易损电路。
五、特性曲线
六、产品尺寸
七、命名方式。
Shimadzu GC-2014C184-E014F 产品说明书.pdf_1718759513.25
GC-2014Big Performance & Small Space GC-2014Improved design and innovative technology for all of our injectors, detectors and fl ow controllers equal or surpass our GC-2010 the high-end technology leader.High PerformanceSuperior PerformanceLarge LCD, all digital gases control and auto-diagnostics inherited from the GC-2010 – “The Most advanced, easy-to-use interface”Easy OperationExcellent User InterfaceUse any column types for any analysis. Packed or capillary columns give you the freedom to choose the best technique for your measurement. Fully integrated multiple valve systems are made simple for optimum performance for SystemGC custom GC products.FlexibilityExpandability for Every SituationSimple nozzle replacement supports both capillary and packed columns.Our New FPD is used for all columnsDetectorsHolophotal Flame Photometric DetectorPhotomultiplierFilter Lens Nozzle The detectors have been completely redesigned, incorporating the GC-2010 detector designs for capillary analyses and the GC-14 detector designs for packed columns. This TCD-2014 unit is ideal for packed column measurements employing the semi-diffusion cell designInjection unitswith unsurpassed accuracyThe design of the SPL-2014 capillary column sample injection unit is based on the GC-2010 technology.This accuracy was unattainable with previous models.The packed column sample injection unit employs the proven design of the GC-14 injection unit.Easier to understand, simpler operationLarge display, help functions and pop-up screens Loaded with productivity-enhancing functionsEasy OperationA large LCD displays chromatograms and method parameters.This is a great improvement for Chromatopacs systems that do not have these real time displays.Graphical user interface enables quick setting of all analytical conditions.The built-in Help function almost eliminates need for familiarization training.Large displayshows most analysis details at a glance,ideal for Chromatopac users.Graphical popup screen that clearly indicates thepolarity so manual injection errors are prevented when using the dual packed column system.Polarity display prevents injection errorsEasy-to-understand Pop-up ScreensChromatogram display Graphical U/IBuilt-in Help FunctionLarge Display6Self-diagnosticsUnit control check Hardware diagnosis Save and check diagnosis logGC-2014250mmGC-14230mmSolenoid valve unitManual fl ow controllersAFCSpeci fi cationsDetectorsTemperature range Temperature settingNo. of units installed simultaneously Detector type 400°C max. (FID, TCD, FTD) 350°C max. (ECD, FPD) 1°C stepsUp to 4 units (restricted depending on detector type) FID, TCD, ECD, FPD, FTD for capillary/packedDual fl ow rate differential system400°C max.3pgC/s (dodecane)107Quartz glass Standard: for packed, Option: for capillaryFlame Ionization Detector (FID) SystemTemperature rangeMinimum detected quantityDynamic rangeNozzleThermal Conductivity Detector (TCD)System Temperature range Dynamic range Sensitivity Dual fl ow rate differential system400°C max.10540,000mV · mL/mg (built-in pre-ampli fi er, with 10 × ampli fi cation)Electron Capture Detector (ECD)SystemTemperature range Minimum detected quantity Dynamic range Fixed current system using 63Ni370MBq radiation source 400°C max.0.1pg/s (γ-BHC)104Flame Photometric Detector (FPD)Temperature range Dynamic rangeMinimum detected quantity 350°C max.P: 104S: 103P: 0.5pgP/s (tributyl phosphate) S: 8pgS/s (dodecane thiol)Flame Thermionic Detector (FTD)Temperature range Dynamic rangeMinimum detected quantity (Two types, one for capillary and one for packed. The speci fi cation are the same.) 400°C max.N: 103P: 103N: 0.4pgN/s (azobenzene)P: 0.05pgP/s (malathion)Display240 × 320 dot graphics display (30 characters × 16 lines)Dimensions, Weight, Power Requirements (GC main unit)Dimensions WeightPower Requirements 400 (W) × 690 (H) × 607 (D) mm48kg (GC-2014AF model)AC100V/120V 230V1800VA (GC-2014AF model) or2600VA (GC-2014AF model), 50/60HzColumn OvenTemperature range DimensionsOven capacity Temperature accuracy Temperature deviation Temperature variation coef fi cient Temperature program steps Programmed rate setting range Total time for all steps Linear heating rangeCooling rateColumns accepted (Ambient + 10°C) ~ 400°C (using liquid CO2 gas*: -50°C ~400°C)250 (W) × 360 (H) × 175 (D) mm15.8LSet value (K) ± 1% (calibration at 0.01°C increments)2°C max. (on 200mm dia. circumference 30mm from rear)0.01°C/°CUp to 20 (cooling program possible)-250°C ~ 250°C/min9999.99 minutes max.30°C/min up to 150°C20°C/min up to 250°C10°C/min up to 380°C7°C/min up to 400°C (at 25°C ambient temperature)300°C ~ 50°C in 6 min max. (at 25°C ambient temperature)Capillary columns: 2Packed columns for GC14B: 4 (Glass columns: 2)Sample Injection UnitTemperature rangeHeating settingsNo. of units installed simultaneously Sample injection unit types Up to 400°C1°C stepsUp to 3 unitsDual packed, single packed, split/splitless, direct, direct (AMC)Carrier Gas Flow Controller For Packed / DualFlow rate setting range Programmable steps Programmed rate setting range Correction function 0 ~ 100mL/min7-400 ~ 400mL/minMaintains column fl ow rate during column oven heatingFor Capillary Split/Splitless, Direct (Split/splitless injection mode)Pressure setting range Programmable steps Programmed rate setting range Split ratio setting rangeTotal fl ow rate setting range Correction function 0 ~ 970kPa7 (pressure-decreasing program possible)-400 ~ 400kPa/min0 ~ 9999.90 ~ 1200mL/minMaintains column average linear velocity during column oven heating (for capillary only)(Pressure mode direct injection)Pressure setting range Programmable steps Programmed rate setting range Correction function 0 ~ 970kPa/min7-400 ~ 400kPa/minMaintains column average linear velocity during column oven heating (for capillary only)(Flow-rate mode direct injection)Flow rate setting range Programmable steps Programmed rate setting range 0 ~ 1200mL/min 7-400 ~ 400mL/minFor Single Packed, Direct (AMC)Flow rate setting range Correction function 0~100mL/minMaintenance column fl ow rate during column oven heating*Optional parts are required to use liquid CO2 gas.。
ZMM4V7HCA中文资料(semtech)中文数据手册「EasyDatasheet - 矽搜」
20
20
反向漏电流
(I R 在V R)
IR （μA）最大.
VR (V)
120
0.7
120
1
100
1
50
1
20
1
10
1
5
1
5
1
5
1
5
1.5
5
2.5
芯片中文手册,看全文,戳
ZMM ... HC系列
特性在T
j = 25 C
Type
齐纳电压
1)
ZMM6V2HC
最小值（V） 最大. （V）
ZMM ... HC系列
特性在T
j = 25 C
Type
齐纳电压
1)
ZMM15HC
最小值（V） 最大. （V）
13.8
15.6
lZT (mA)
ZMM15HCA
13.48
14.09
10
ZMM15HCB
13.95
14.56
ZMM15HCC
14.42
15.52
ZMM16HC
15.3
17.1
ZMM16HCA
13.62
动态电阻
欧姆为L ZT 10
8 8 8 8 8 10 12 14
lZT (mA) 20 20 20 20 20 20 10 10 10
反向漏电流
(I R 在V R)
IR （μA）最大.
VR (V)
5
3
2
3.5
0.5
4
0.5
5
0.5
6
0.2
7
0.2
8
0.2
9
0.2
SMAJ170CA中文资料
Mechanical Data
· · · · ·
A
C
A B C D E G H J
D
J
H
G E
All Dimensions in mm
Maximum Ratings
Characteristic Peak Pulse Power Dissipation (Non repetitive current pulse derated above T = 25°C) A (Note 1) Peak Forward Surge Current, 8.3ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Notes 1, 2, & 3) Instantaneous Forward Voltage @ IPP = 35A (Notes 1, 2, & 3) Operating and Storage Temperature Range Notes:
元器件交易网
SMAJ5.0(C)A - SMAJ170(C)A
400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features
· · · · · · · 400W Peak Pulse Power Dissipation 5.0V - 170V Standoff Voltages Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material: UL Flammability Classification Rating 94V-0 Case: SMA, Transfer Molded Epoxy Terminals: Solderable per MIL-STD-202, Method 208 Polarity Indicator: Cathode Band (Note: Bi-directional devices have no polarity indicator.) Marking: Date Code and Marking Code See Page 3 Weight: 0.064 grams (approx.)
SMBJ40CA中文资料
Cj, CAPACITANCE (pF)
75
1000
Uni-directional
50
100
Bi-directional
25
10 X 1000 Waveform as defined by REA
0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Pulse Derating Curve
DS19002 Rev. 11 - 2
1 of 3
SMBJ5.0(C)A - SMBJ170(C)A
元器件交易网
Part Number Add C For Bi-Directional (Note 4) SMBJ5.0(C)A SMBJ6.0(C)A SMBJ6.5(C)A SMBJ7.0(C)A SMBJ7.5(C)A SMBJ8.0(C)A SMBJ8.5(C)A SMBJ9.0(C)A SMBJ10(C)A SMBJ11(C)A SMBJ12(C)A SMBJ13(C)A SMBJ14(C)A SMBJ15(C)A SMBJ16(C)A SMBJ17(C)A SMBJ18(C)A SMBJ20(C)A SMBJ22(C)A SMBJ24(C)A SMBJ26(C)A SMBJ28(C)A SMBJ30(C)A SMBJ33(C)A SMBJ36(C)A SMBJ40(C)A SMBJ43(C)A SMBJ45(C)A SMBJ48(C)A SMBJ51(C)A SMBJ54(C)A SMBJ58(C)A SMBJ60(C)A SMBJ64(C)A SMBJ70(C)A SMBJ75(C)A SMBJ78(C)A SMBJ85(C)A SMBJ90(C)A SMBJ100(C)A SMBJ110(C)A SMBJ120(C)A SMBJ130(C)A SMBJ150(C)A SMBJ160(C)A SMBJ170(C)A Reverse Standoff Voltage VRWM (V) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 Breakdown Voltage VBR @ IT (Note 5) Min (V) 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.0 111.0 122.0 133.0 144.0 167.0 178.0 189.0 Max (V) 7.23 7.67 8.30 8.95 9.58 10.23 10.82 11.50 12.80 14.40 15.30 16.50 17.90 19.20 20.50 21.70 23.30 25.50 28.00 30.70 33.20 35.80 38.30 42.20 46.00 51.10 54.90 57.50 61.30 65.20 69.00 74.60 76.70 81.80 89.50 95.80 99.70 108.20 115.50 128.00 140.00 153.00 165.50 192.50 205.00 217.50 Test Current IT(mA) 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max. Reverse Leakage @ VRWM(Note 6) IR (mA) 800 800 500 200 100 50 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Max. Clamping Max. Peak Pulse Current Voltage @ Ipp Ipp VC (V) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 (A) 65.2 58.3 53.6 50.0 46.5 44.1 41.7 39.0 35.3 33.0 30.2 27.9 25.8 24.0 23.1 21.7 20.5 18.5 16.9 15.4 14.2 13.2 12.4 11.3 10.3 9.3 8.6 8.3 7.7 7.3 6.9 6.4 6.2 5.8 5.3 4.9 4.7 4.4 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.2 Marking Code BIAE AG AK AM AP AR AT AV AX AZ BE BG BK BM BP BR BT BV BX BZ CE CG CK CM CP CR CT CV CX CZ DE DG DK DM DP DR DT DV DX DZ EE EG EK EM EP ER UNIKE KG KK KM KP KR KT KV KX KZ LE LG LK LM LP LR LT LV LX LZ ME MG MK MM MP MR MT MV MX MZ NE NG NK NM NP NR NT NV NX NZ PE PG PK PM PP PR
P4SMA550CA中文资料
20.50
22.80 25.20
1
33.2
12.3
5
P4SMA27A
P4SMA27CA 27A 27C
23.10
25.70 28.40
1
37.5
10.9
5
P4SMA30A
P4SMA30CA 30A 30C
25.60
28.50 31.50
1
41.4
9.9
5
P4SMA33A
P4SMA33CA 33A 33C
36.80
40.90 45.20
1
59.3
6.9
5
P4SMA47A
P4SMA47CA 47A 47C
40.20
44.70 49.40
1
64.8
6.3
5
P4SMA51A
P4SMA51CA 51A 51C
43.60
48.50 53.60
1
70.1
5.8
5
P4SMA56A
P4SMA56CA 56A 56C
Case:
JEDEC DO214AC. Molded plastic over
glass passivated junction
Mounting Position: Any
Polarity:
Color band denoted positive end
(cathode) except Bidirectional
(Volts)
Maximum Peak Pulse
Current IPP (A)
Maximum Reverse Leakage IR @ VR (µA)
P4SMA6.8A P4SMA6.8CA 6V8A 6V8C 5.80
AZM 170SK_11ZRKA 24 VAC DC 阀门互锁器说明书
26.10.2016 06:54:48hDatasheet AZM 170SK11ZRKA 24 VAC/DCSolenoid interlock / AZM 170 Preferred typ(Minor differences between the printed image and the originalproduct may exist!)• Thermoplastic enclosure • Doubleinsulated • Compact design• 90 mm x 84 mm x 30 mm • 1 Cable entry M 20 x 1.5• Interlock with protection against incorrect locking.• Long life• High holding force • Screw connection • Manual releaseOrdering detailsProduct type description AZM 170SK11ZRKA 24 VAC/DC Article number 101144262EAN code 4030661132105eCl@ss 27272603ApprovalApprovalBG USA/CAN CCCClassificationStandards EN ISO 138491B 10d Opener (NC) 2.000.000Mission time 20 Y earsnoticeGlobal PropertiesProduct name AZM 170StandardsEN 6094751, BGGSET19Compliance with the Directives (Y/N) Y esNumber of actuating directions2 pieceActive principle electromechanicalDuty cycle Magnet 100 %Materials Material of the housings Plastic, glassfibre reinforced thermoplastic, selfextinguishing Material of the contacts SilverHousing coating NoneWeight300 gMechanical dataDesign of electrical connection Screw connectionCable section Min. Cable section1 x 0,25 mm² Max. Cable section1 x 1.5 mm², flexibleMechanical life> 1.000.000 operationsEmergency unlocking device (Y/N)NoManual release (Y/N)Y es bottomEmergency release (Y/N)NoLatching force30 NPositive break force8.5 Npositive break travel11 mmClamping force F1000 NMax. Actuating speed2 m/sAmbient conditionsAmbient temperature Min. environmental temperature−25 °C Max. environmental temperature+60 °CProtection class IP67 to IEC/EN 60529Electrical dataDesign of control element Normally open contact (NO), Opener (NC)notice changeover contact with double break, type Zb or 2 NC contacts,with galvanically separated contact bridgesSwitching principle Creep circuit elementNumber of auxiliary contacts1 pieceNumber of safety contacts1 piecePower to unlock NoPower to lock Y esRated control voltage U s24 VAC/DCPower consumption max. 10 WRated impulse withstand voltage U imp4 kVRated insulation voltage U i250 VThermal test current I the10 AUtilisation category AC15: 230 V / 4 ADC13: 24 V / 4 AMax. fuse rating6 A gG DfuseATEXExplosion protection categories for gases NoneExplosion protected category for dusts NoneMiscellaneous dataApplicationssliding safety guard,removable guard,hinged safety guardDimensionsDimensions of the sensor Width of sensor90 mm Height of sensor100.5 mm Length of sensor30 mmnoticeIndividual coding available on requestManual release• For manual release using M5 triangular key, available as accessoryDiagramNote Diagrampositive break NC contactactiveno activeNormallyopen contactNormallyclosed contactSwitch travel diagramNotes Switch travel diagramContact closedContact openSetting rangeBreak pointPositive opening sequence/ angleVS adjustable range of NO contactVÖ adjustable range of NC contactN after travelOrdering suffixThe applicable ordering suffix is added at the end of the part number of the safety switch. Order example: AZM 170SK11ZRKA 24 VAC/DC1637...16370,3 µm goldplated contacts...ST2431connector M12 , Individual solenoid monitoringOrdering codeAZM 170(1)(2)Z(3)K(4)(5)(6)(7)(1)without IDC method of terminationSK Screw connection(2)111 Normally open contact (NO) / 1 Opener (NC)022 Opener (NC)12/0.01 Normally open contact (NO), 2 Opener (NC) / (3)without Latching force 5 NR Latching force 30 NI Individual coding(4)without Power to unlockA Power to lock(5)without cable glandST Connector M12 x 1ST2431Connector M12 x 1, Individual solenoid monitoring(6)24VAC/DC U s 24 VAC/DC110VAC U s 110 VAC230VAC U s 230 VAC(7)without Manual release2197Manual release from side (Power to unlock)1637goldplated contactsAZM 170ST and AZM 170SKAZM 170ST(1)Z(2)K(3)(4)(5)024AZM 170SK(1)Z(2)K(3)(4)(5)024(1)11/111 Normally open contact (NO), 1 Opener (NC) / 1Normally open contact (NO), 1 Opener (NC) 11/021 Normally open contact (NO), 1 Opener (NC) / 2Opener (NC)12/001 Normally open contact (NO), 2 Opener (NC) / 12/111 Normally open contact (NO), 2 Opener (NC) / 1Normally open contact (NO), 1 Opener (NC) 12/021 Normally open contact (NO), 2 Opener (NC) / 2Opener (NC)02/012 Opener (NC), / 1 Opener (NC), 02/102 Opener (NC), / 1 Normally open contact (NO), (2)without Latching force 5 NR Latching force 30 N(3)without Power to unlockA Power to lock(4)1637goldplated contacts(5)2197Manual release for Power to unlockDocumentsOperating instructions and Declaration of conformity (fr) 611 kB, 29.04.2016 Code: mrl_azm170_frOperating instructions and Declaration of conformity (de) 595 kB, 25.04.2016 Code: mrl_azm170_deOperating instructions and Declaration of conformity (it) 645 kB, 09.04.2010 Code: mrl_azm170_itOperating instructions and Declaration of conformity (nl) 720 kB, 23.09.2010 Code: mrl_azm170_nlOperating instructions and Declaration of conformity (en) 611 kB, 25.04.2016 Code: mrl_azm170_enOperating instructions and Declaration of conformity (jp) 843 kB, 23.08.2016 Code: mrl_azm170_jpOperating instructions and Declaration of conformity (pl) 590 kB, 11.02.2015 Code: mrl_azm170_plOperating instructions and Declaration of conformity (da) 582 kB, 07.08.2012 Code: mrl_azm170_daOperating instructions and Declaration of conformity (es) 609 kB, 22.06.2016 Code: mrl_azm170_esBGtest certificate (en) 260 kB, 09.12.2015Code: z_m17p02BGtest certificate (de) 257 kB, 09.12.2015Code: z_m17p01CCC certification (en) 933 kB, 16.08.2016Code: q_371p02CCC certification (cn) 932 kB, 16.08.2016Code: q_371p03EAC certification (ru) 809 kB, 05.10.2015Code: q_6040p17_ruImagesDimensional drawing (basic component)Detail photoSystem componentsActuator101122893 AZ 17/170B1• Particularly suitable for sliding doors101137406 AZ 17/170B12245• Particularly suitable for sliding doors • Damps vibration on guard device101122895 AZ 17/170B5• Particularly suitable for sliding doors101139788 AZ 17/170B11• Particularly suitable for sliding doors101139789 AZ 17/170B15• Particularly suitable for sliding doors101123391 AZM 170B6• Particularly suitable for hinged guards• For very smal actuating radii• The direction of actuation can be selected by applicable insertionof the insertAccessories101208493 AZM 170B CENTERING GUIDE• for AZ 17 and AZM 170101100887 TRIANGULAR KEY TKM5• For manual release using M5 triangular key, available asaccessory• For maintenance, installation, etc.ConnectorAK4M12• Prewired cable• 4poleSK4M12• Connector without cable• 4poleK.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D42279 WuppertalThe data and values have been checked throroughly. Technical modifications and errors excepted.Generiert am 26.10.2016 06:54:48h Kasbase 3.2.5.F.64I。
SM170415资料
Specifications are subject to change without notice1Current and Voltage Controls•3-phase monitoring relay for phase sequence/phase loss•Measures when all 3 phases are present and have the correct phase sequence •Output: 10 A SPDT relay •Plug-in type module •S-housing•LED-indication for power supply and output ON •Power supply is the 3-phased measuring voltageProduct Description3-phase plug-in monitoring and phase sequence/phase-loss relay. Frequently used to prevent a 3-phase motor fromType SelectionPlug Output Supply: 220 VAC Supply: 380 VAC Supply: 400 VAC Supply: 415 VAC CircularSPDTSM 170 220SM 170 380SM 170 400SM 170 415Input SpecificationsInput Pin 5 Phase L1 Pin 6 Phase L2 Pin 7 Phase L3Pin 11Neutral (optional connection)measures on own supplyOutputSPDT relay Rated insulation voltage 250 VAC (rms)(cont./elect.)Contact ratings (AgCdO)µ(micro gap)Resistive loads AC 110 A/250 VAC (2500 VA)DC 1 1 A/250 VDC (250 W)or10 A/25 VDC (250 W)Small inductive loads AC 152.5 A/230 VAC DC 135 A/24 VDCMechanical life ≥30 x 106operations Electrical life AC 1≥2.5 x 105operations (at max. load)Operating frequency ≤7200 operations/h Dielectric strength Dielectric voltage≥2 kVAC (rms) (cont./elect.)Rated impulse withstand volt.4 kV (1.2/50 µs) (cont./elect.)(IEC 60664)running on only 2 phases or to secure the right phase se-quence when connecting a load to the mains.Power supply AC types Overvoltage cat. III (IEC 60664)Rated operational voltage (IEC 60038)Through pins 5, 6, 7 & 11220 3 x 220 VAC ±15%, 45 to 65 Hz 380 3 x 380 VAC ±15%, 45 to 65 Hz 400 3 x 400 VAC ±15%, 45 to 65 Hz 4153 x 415 VAC ±15%, 45 to 65 HzInternal measuring circuit is connected to pins 5 & 7Voltage interruption ≤40 msDielectric voltageNone (supply/elect.)Rated impulse withstand volt.4 kV (1.2/50 µs) (line/neutral, line/line), direct connection to electronics Rated operational power2.5 VA3-Phase Voltage Sequence Control Type SM 170Output SpecificationsSupply Specifications2Specifications are subject to change without noticeSM 170Reaction time τ= 0.5 s, worst case reac-tion time may be up to 5 x τIndication forPower supply ON LED, green Output ON LED, redEnvironment(IEC 60947-1)Degree of protection IP 20 B (IEC 60529)Pollution degree (IEC 60664)1: SM 170 380/400/4152: SM 170 220Operating temperature -20°to +50°C (-4°to +122°F)Storage temperature -50°to +85°C (-58°to +185°F)Weight 200 gApprovalsUL, CSA, SEV(SEV only 3 x 220 VAC)The relay measures on its own 3-phased power supply and operates when all phases are present and the phase se-quence is correct.Example 1The relay is for monitoring that the power supply has a correct phase sequence and that all phase voltages are present. The relay is a 3-phase power supply monitoring re-lay.Example 2The relay releases in case of interruption of one of the phases, provided that the voltage regenerated by elec-tric motors on the interuptedMode of Operationphase does not exceed 70%of the nominal voltage. If it exceeds this value the con-nection cannot be recom-mended (see description ex.3). The regenerated voltage will be a lower phase voltage combined with a phase angle failure.Example 3If the value of the regene-rated voltage is slightly higher than 70% of the nominal volt-age, the relay releases when neutral is connected to pin 11as sensitivity is improved.Operation DiagramWiring DiagramsSockets ◊S 411Hold down spring ◊HF Mounting rack SM 13Socket coversBB 4Front mounting bezelFRS 2For further information refer to "Accessories".AccessoriesExample 1Example 2 and 3General Specifications。
AZM 170SK
26.10.2016 06:11:02hDatasheet AZM 170SK11ZRK2197 230 VACSolenoid interlock / AZM 170(Minor differences between the printed image and the originalproduct may exist!)• Thermoplastic enclosure • Doubleinsulated • Compact design• 90 mm x 84 mm x 30 mm • 1 Cable entry M 20 x 1.5• Interlock with protection against incorrect locking.• Long life• High holding force• Manual release from side • Screw connectionOrdering detailsProduct type description AZM 170SK11ZRK2197 230 VAC Article number 101144268EAN code 4030661132167eCl@ss 27272603ApprovalApprovalBG USA/CAN CCCClassificationStandards EN ISO 138491B 10d Opener (NC) 2.000.000Mission time 20 Y earsnoticeGlobal PropertiesProduct name AZM 170StandardsEN 6094751, BGGSET19Compliance with the Directives (Y/N) Y es Number of actuating directions2 pieceActive principle electromechanicalDuty cycle Magnet 100 %Materials Material of the housings Plastic, glassfibre reinforced thermoplastic, selfextinguishing Material of the contacts SilverHousing coating NoneWeight305 gMechanical dataDesign of electrical connection Screw connectionCable section Min. Cable section1 x 0,25 mm² Max. Cable section1 x 1.5 mm², flexibleMechanical life> 1.000.000 operationsEmergency unlocking device (Y/N)NoManual release (Y/N)Y es bottom rightEmergency release (Y/N)NoLatching force30 NPositive break force8.5 Npositive break travel11 mmClamping force F1000 NMax. Actuating speed2 m/sAmbient conditionsAmbient temperature Min. environmental temperature−25 °C Max. environmental temperature+60 °CProtection class IP67 to IEC/EN 60529Electrical dataDesign of control element Normally open contact (NO), Opener (NC)notice changeover contact with double break, type Zb or 2 NC contacts,with galvanically separated contact bridgesSwitching principle Creep circuit elementNumber of auxiliary contacts1 pieceNumber of safety contacts1 piecePower to unlock Y esPower to lock NoRated control voltage U s230 VACPower consumption max. 10 WRated impulse withstand voltage U imp4 kVRated insulation voltage U i250 VThermal test current I the10 AUtilisation category AC15: 230 V / 4 ADC13: 24 V / 4 AMax. fuse rating6 A gG DfuseATEXExplosion protection categories for gases NoneExplosion protected category for dusts NoneMiscellaneous dataApplicationssliding safety guard,removable guard,hinged safety guardDimensionsDimensions of the sensor Width of sensor108 mm Height of sensor100.5 mm Length of sensor30 mmnoticeIndividual coding available on requestManual release from side• For manual release using M5 triangular key, available as accessory• Additional manual release on sideDiagramNote Diagrampositive break NC contactactiveno activeNormallyopen contactNormallyclosed contactSwitch travel diagramNotes Switch travel diagramContact closedContact openSetting rangeBreak pointPositive opening sequence/ angleVS adjustable range of NO contactVÖ adjustable range of NC contactN after travelOrdering suffixThe applicable ordering suffix is added at the end of the part number of the safety switch. Order example: AZM 170SK11ZRK2197 230 VAC1637...16370,3 µm goldplated contacts...ST2431connector M12 , Individual solenoid monitoringOrdering codeAZM 170(1)(2)Z(3)K(4)(5)(6)(7)(1)without IDC method of terminationSK Screw connection(2)111 Normally open contact (NO) / 1 Opener (NC)022 Opener (NC)12/0.01 Normally open contact (NO), 2 Opener (NC) / (3)without Latching force 5 NR Latching force 30 NI Individual coding(4)without Power to unlockA Power to lock(5)without cable glandST Connector M12 x 1ST2431Connector M12 x 1, Individual solenoid monitoring(6)24VAC/DC U s 24 VAC/DC110VAC U s 110 VAC230VAC U s 230 VAC(7)without Manual release2197Manual release from side (Power to unlock)1637goldplated contactsAZM 170ST and AZM 170SKAZM 170ST(1)Z(2)K(3)(4)(5)024AZM 170SK(1)Z(2)K(3)(4)(5)024(1)11/111 Normally open contact (NO), 1 Opener (NC) / 1Normally open contact (NO), 1 Opener (NC) 11/021 Normally open contact (NO), 1 Opener (NC) / 2Opener (NC)12/001 Normally open contact (NO), 2 Opener (NC) / 12/111 Normally open contact (NO), 2 Opener (NC) / 1Normally open contact (NO), 1 Opener (NC) 12/021 Normally open contact (NO), 2 Opener (NC) / 2Opener (NC)02/012 Opener (NC), / 1 Opener (NC), 02/102 Opener (NC), / 1 Normally open contact (NO), (2)without Latching force 5 NR Latching force 30 N(3)without Power to unlockA Power to lock(4)1637goldplated contacts(5)2197Manual release for Power to unlockDocumentsOperating instructions and Declaration of conformity (fr) 611 kB, 29.04.2016 Code: mrl_azm170_frOperating instructions and Declaration of conformity (de) 595 kB, 25.04.2016 Code: mrl_azm170_deOperating instructions and Declaration of conformity (it) 645 kB, 09.04.2010 Code: mrl_azm170_itOperating instructions and Declaration of conformity (nl) 720 kB, 23.09.2010 Code: mrl_azm170_nlOperating instructions and Declaration of conformity (en) 611 kB, 25.04.2016 Code: mrl_azm170_enOperating instructions and Declaration of conformity (jp) 843 kB, 23.08.2016 Code: mrl_azm170_jpOperating instructions and Declaration of conformity (pl) 590 kB, 11.02.2015 Code: mrl_azm170_plOperating instructions and Declaration of conformity (da) 582 kB, 07.08.2012 Code: mrl_azm170_daOperating instructions and Declaration of conformity (es) 609 kB, 22.06.2016 Code: mrl_azm170_esBGtest certificate (en) 260 kB, 09.12.2015Code: z_m17p02BGtest certificate (de) 257 kB, 09.12.2015Code: z_m17p01CCC certification (en) 933 kB, 16.08.2016Code: q_371p02CCC certification (cn) 932 kB, 16.08.2016Code: q_371p03EAC certification (ru) 809 kB, 05.10.2015Code: q_6040p17_ruImagesDimensional drawing (basic component)Detail photoDetail photoSystem componentsActuator101122893 AZ 17/170B1• Particularly suitable for sliding doors101137406 AZ 17/170B12245• Particularly suitable for sliding doors • Damps vibration on guard device101122895 AZ 17/170B5• Particularly suitable for sliding doors101139788 AZ 17/170B11• Particularly suitable for sliding doors101139789 AZ 17/170B15• Particularly suitable for sliding doors101123391 AZM 170B6• Particularly suitable for hinged guards• For very smal actuating radii• The direction of actuation can be selected by applicable insertionof the insertAccessories101208493 AZM 170B CENTERING GUIDE• for AZ 17 and AZM 170101100887 TRIANGULAR KEY TKM5• For manual release using M5 triangular key, available asaccessory• For maintenance, installation, etc.ConnectorAK4M12• Prewired cable• 4poleSK4M12• Connector without cable• 4poleK.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D42279 WuppertalThe data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am 26.10.2016 06:11:03h Kasbase 3.2.5.F.64I。
Seymour Duncan PowerStage 170 电源说明书
Safety Guide:For more information on operating your PowerStage™ 170, please visit/power-manuals#powerstage170WARNINGTo reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.This symbol of a lightning flash inside a triangle is intended to alert the user to the presence ofuninsulated “dangerous voltages” within the player’s enclosure that may be of a magnitude so as toconstitute a risk of electrical shock.This symbol of an explanation point inside a triangle is intended to alert the user to the presence ofimportant operating and safety information in the documents accompanying the player.This warning indicates that the marked surface and adjacent surfaces can attain temperatures thatmay be hot to the touch.This symbol indicates the proper attachment point for the protective earth safety ground. In thecase of any repairs being conducted by a qualified electrical repair technician, the wire connectingthe earth terminal of the IEC power socket to the chassis must be connected only to the attachmentpoint indicated by this symbol.See all safety markings on bottom/back of product.Important Safety Instructions1. Read this instruction manual in its entirety before operating the equipment. Keep the manual for future reference.2. Observe all safety precautions, warnings and instructions noted in this manual.3. WARNING – To reduce the risk of fire or electric shock, do not expose this equipment to moisture. Keep this device away from sources of water such as pools, bathtubs and sinks. Do not expose to rain, dripping/ splashing water or sprayed liquids. Do not place objects filled with liquids on the top.4. Unplug from power source before cleaning. Clean only with dry cloth.5. This product requires ventilation to operate properly. Do not block the fan opening or the vents on the side of the chassis. Maintain at least 4” clearance on all sides and top.6. Keep this product away from sources of heat and open flame such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.7. Make sure that the power cord is intact and undamaged before using it. Do not use cords with visible damage to the insulation or end connectors. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.8. This device is equipped with a safety feature that requires the use of a three-pin grounding plug. Do not defeat the safety purpose of the grounding plug by using an adapter or any other means such as removing the third, grounding prong. If the provided plug does not fit your outlet, consult an electrician about replac-ing an obsolete power outlet or obtain the proper IEC power cord for your area.9. Install in accordance with the manufacturer’s instructions.10. Do not attempt to operate if the unit has been damaged in any way.11. Only use attachments/accessories specified by the manufacturer.12. Unplug this apparatus during lightning storms or when unused for long periods of time.13. CAUTION – RISK OF ELECTRIC SHOCK! DO NOT OPEN! There are no user serviceable parts inside. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.14. WARNING – Due to the potential for hot surfaces and high sound pressure levels, this equipment is not suitable for use in locations where children are likely to be present.Compliance StatementNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try and correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device has been tested for and found to comply with Australia and New Zealand AS/NZS CISPR 22:2009.This device been tested and found to comply with Industry Canada ICES-003 Issue 6:2016. This device complies with CAN ICES-3B/NMB-3B.This device has been tested and found to comply with Europe’s EMC Directive 2014/30/EU. The standards applied were EN 55014-1:2006 (A1:2009 & A2:2011 included), EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013 and EN 62233:2008.This device has been tested and found to comply with Europe’s product safety directive 2014/35/EU. The standard applied was EN62368-1:2014.Note: Any changes or modifications to this equipment not expressly approved by Seymour Duncan could void the user’s authority to operate this equipment.Recycling InformationThis symbol indicates this product is classified as Waste Electrical and Electronic Equipment (WEEE) in the European Union and should not be discarded with household waste. Other territories may vary.Before using your amplifier:Verify your AC Circuit Voltage and Capacity:This amplifier is configured at the factory to accommodate one of two line voltages: 100-120VAC or 220-240VAC. Check the label on the back panel near the IEC power cord connector to determine the voltage for which your amplifier is configured. Be sure it matches your local line voltage before plugging in. In the event of a mismatch, contact your local distributor/dealer or contact the factory directly. There are no user serviceable parts inside the chassis. Do not attempt to open the product or service it yourself.Under maximum load conditions this amplifier may require heavy current draw. To insure proper performance and avoid potential safety hazards, connect only to circuits that can provide a minimum of 15 amps of current. Avoid connecting to the same circuit as other high-current consumers such as heating devices, microwave ovens and high-wattage lighting as this may cause circuit breakers or fuses to blow. Avoid connecting any audio equipment to the same circuit as equipment with motors such as compressors, refrigerators or air conditioners as this can cause high levels of unwanted noise in your sound or dips in power as motors start up.Set up:Place the unit on a firm, level surface. Do not plug or unplug an instrument or speaker while the amplifier is turned on.Heat and Ventilation:Make sure to allow space around the sides. Back and top for air circulation. Avoid use in extremely hot locations with direct exposure to sunlight or placement near heating equipment. Avoid use in moist or high humidity areas. Do not block fan opening or vent holes on the side. Allow for adequate air flow and do not place coats or blankets over the amplifier.Copyright © 2017 Seymour Duncan。
日本真善美 JANOME MC9400 QCP 说明书
2
e w
r
t
yu
ESSENTIAL PARTS
Names of Parts
q Thread take-up lever 传 w Reference chart 以然 e Top cover 满 Touch panel stylus holder r 者位 位 才 就 t storage 音音 Foot 所才 就 compartment y持 Bobbin thread Bcutter B u Bobbin winder spindle 深此持 运 i Bobbin thread cutter A A 半持 o何 Hole for extra 向 spool pin !0 Spool 向 pin !1 Spool 作 holder (large) 个 载 !2 Retractable light !3 Face cover 传 !4 Needle threader lever !5 Thread cutter 何 制 转 !6 超 Extension 使table (accessory storage) !7 Needle plate release lever / 当 Start/Stop) !8 Start/stop button 制 !9 Reverse 内 button @0 Auto-lock 超 / button @1 Needle up/down button 所 @2 Presser foot lifter button @3 Thread cutter button 四 所传 dial @4 Feed balancing 要 socket 被 @5 己己 Knee lifter 位 @6 Speed control slider 同 @7 Visual touch screen 超内 包 @8 Lower 超 thread guide @9 Needle clamp screw f 和 所A #0 超 Needle #1 持 Zigzag foot A 使 #2 持 Needle plate ⻄西cover release button #3 Hook 所 cover plate #4 Hook 所内dog 包 #5 Feed 接题 传 #6 Foot holder 超 #7 Setscrew #8 Buttonhole lever 将 #9 ⻓长 Needle threader 间 四始使 $0 是果 Carrying handle $1 USB Handwheel ⻄西 传 $2 Dual feed balancing dial $3 Thread cutter switch jack 要 $4 所度 USB port 难 feed lever $5 Drop 出 所 socket $6 Machine 所传 $7 Foot control jack $8 Power switch $9 Dual feed drive f 工工 %0 Presser foot lifter
CT170-14※ -MX47 手動圧着工具 取扱説明書说明书
Crimper retaining pin
Wire crimper Guide cover
Disordered wire strand
Terminal Guide
Wire anvil
Insulation anvil
Cut off
3.Preparation of Crimping
Strip the insulation of a wire to the specified length L . (refer to para.8)
4
1.Specification
4
2.Parts Name
5
3.Preparation of Crimping
5
4.Set change of crimper
6
5.Crimping
6
5-1.Hand.Contact setting
7
5-3.Wire Setting
7
5-4.Crimping
Number
DCF-S-0126-2A 2(0/160.04)
T700357
Page
2 10
Read In the Beginning
Caution symbols
In this manual and on our products as well, the following caution symbols are used to show important information and warnings for correct use of our products. This is to avoid possible personal injury and property damage. Be sure to read and understand these special instructions before proceeding to the procedural details.
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Approve Sheet Part Number: P4SMAJ SERIES
3.DATA SHEET P4SMAJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 to 220 Volts 400 Watt Peak Power Pulse
SMA / DO-214AC
Unit: inch ( mm )
MECHANICAL DATA
Case: JEDEC DO-214AC low profile molded plastic Terminals: Solder leads, solderable per MIL-STD-750, Method 2026 Polarity: Indicated by cathode band except Bi-directional types. Standard Packageing: 12mm tape per(EIA-481) Weight: 0.002 ounces, 0.064 gram
.062 (1.60) .055 (1.40)
.181 (4.60) .157 (4.00)
.012 (.305) .006 (.152)
.060 (1.52) .030 (0.76)
.008(.203) .002(.051) .208 (5.28) .188 (4.80)
MAXIMUM RATINGS AND CHARACTERISTICS
SYMBOL PPPM I FSM I PPM P M(AV) T J , T STG
VALUE Minimum 400 40.0 See Table 1 1.0 -55 to +150
UNITS Watts Amps Amps Watts °C
NOTES: 1.Non-repetitive current pulse, per Fig. 3 and derated above T A=25°Cper Fig. 2. 2.Mounted on 5.0mm 2 Copper pads to each terminal. 3.8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum. 4.lead temperature at 75°C=T L . 5.Peak pluse power waveformis 10/1000µS.
I PP A
M i n.
M a x. V mA
UNI
BI
UNI
BI
V
V
400W Transient Voltage Suppressor
P4SMAJ5.0 P4SMAJ5.0A P4SMAJ6.0 P4SMAJ6.0A P4SMAJ6.5 P4SMAJ6.5A P4SMAJ7.0 P4SMAJ7.0A P4SMAJ7.5 P4SMAJ7.5A P4SMAJ8.0 P4SMAJ8.0A P4SMAJ8.5 P4SMAJ8.5A P4SMAJ9.0 P4SMAJ9.0A P4SMAJ10 P4SMAJ10A P4SMAJ11 P4SMAJ11A P4SMAJ12 P4SMAJ12A P4SMAJ13 P4SMAJ13A P4SMAJ14 P4SMAJ14A P4SMAJ15 P4SMAJ15A P4SMAJ16 P4SMAJ16A P4SMAJ17 P4SMAJ17A P4SMAJ18 P4SMAJ18A P4SMAJ20 P4SMAJ20A P4SMAJ22 P4SMAJ22A P4SMAJ24 P4SMAJ24A P4SMAJ26 P4SMAJ26A P4SMAJ28 P4SMAJ28A P4SMAJ30 P4SMAJ30A P4SMAJ33 P4SMAJ33A P4SMAJ36 P4SMAJ36A P4SMAJ40 P4SMAJ40A P4SMAJ5.0C P4SMAJ5.0C A P4SMAJ6.0C P4SMAJ6.0C A P4SMAJ6.5C P4SMAJ6.5C A P4SMAJ7.0C P4SMAJ7.0C A P4SMAJ7.5C P4SMAJ7.5C A P4SMAJ8.0C P4SMAJ8.0C A P4SMAJ8.5C P4SMAJ8.5C A P4SMAJ9.0C P4SMAJ9.0C A P4SMAJ10C P4SMAJ10C A P4SMAJ11C P4SMAJ11C A P4SMAJ12C P4SMAJ12C A P4SMAJ13C P4SMAJ13C A P4SMAJ14C P4SMAJ14C A P4SMAJ15C P4SMAJ15C A P4SMAJ16C P4SMAJ16C A P4SMAJ17C P4SMAJ17C A P4SMAJ18C P4SMAJ18C A P4SMAJ20C P4SMAJ20C A P4SMAJ22C P4SMAJ22C A P4SMAJ24C P4SMAJ24C A P4SMAJ26C P4SMAJ26C A P4SMAJ28C P4SMAJ28C A P4SMAJ30C P4SMAJ30C A P4SMAJ33C P4SMAJ33C A P4SMAJ36C P4SMAJ36C A P4SMAJ40C P4SMAJ40C A HD HE HF HG HH HK HL HM HN HP HQ HR HS HT HU HV HW HX HY HZ ID IE IF IG IH IK IL IM IN IP IQ IR IS IT IU IV IW IX IY IZ JD JE JF JG JH JK JL JM JN JP JQ JR TD TE TF TG TH TK TL TM TN TP TQ TR TS TT TU TV TW TX TY TZ UD UE UF UG UH UK UL UM UN UP UQ UR US UT UU UV UW UX UY UZ VD VE VF VG VH VK VL VM VN VP VQ VR 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 44.4 44.4 7.55 7.25 8.45 7.67 9.14 8.30 9.86 8.95 10.67 9.58 11.30 10.23 11.92 10.82 12.6 11.5 14.1 12.8 15.4 14.0 16.9 15.3 18.2 16.5 19.8 17.9 21.1 19.2 22.6 20.5 23.9 21.7 25.3 23.3 28.1 25.5 30.9 28.0 33.8 30.7 36.6 33.2 39.4 35.8 42.2 38.3 46.5 42.2 50.7 46.0 56.3 51.1 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 800 800 800 800 500 500 200 200 100 100 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1600 1600 1600 1600 1000 1000 400 400 200 200 100 100 20 20 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 9.6 9.2 11.4 S10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 41.6 43.5 35.1 38.8 32.5 35.7 30.1 33.3 28.0 31.0 26.5 29.4 25.1 27.7 23.6 26.0 21.2 23.5 20.0 22.0 18.1 20.1 16.8 18.6 15.5 17.2 14.8 16.4 13.8 15.3 13.1 14.5 12.4 13.7 11.1 12.3 10.1 11.2 9.3 10.3 8.6 9.5 8.0 8.8 7.5 8.3 6.8 7.5 6.2 6.9 5.6 6.2 SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC SMA/D O-214AC