lec14-demandpagex4
阿拉夫拉维尔（Alfa Laval）S和P弹性分离系统说明书
Oil block including water transducerSeparatorS and P Flex separation systemsAlfa Laval’s S and P Flex separation systems com b ine the high efficiency, low sludge output and low operating cost of Alfa Laval centrifugal separators with a flexible scope of supply. Extensive possibilities for the separation system layout and assembly make it possible to suit any engine room and any oil separation application.In addition, S and P Flex separation systems feature the EPC 60 controller, which enables the i ntuitive navigation of menus, parameters and alarms. The EPC 60 controller also has a modular construction for easy I/O board addition and replacement.The S and P Flex separation concept includes the complete S- and P-separator range. These can be combined in mixed ship sets, even within a single customer-specified module.Flex system components for S separators 921–987.* S separators can also be used to clean lighter fuel oils and lubricating oils.Application S separatorsS separators are based on Alcap technology, which means they automatically adjust the oil/water interphase based on the water content in the clean oil outlet. This makes them particularly suitable for separating heavy fuel oils with varying density, though they can be used to clean all of the following:• H eavy fuel oils with densities up to 1 010 kg/m 3 and viscosities up to 700 cSt/50°C (higher v iscosities available upon request)• L ubricating oils • Distillates• Lighter diesel oilsS separators are designed for automatic operation in periodically unmanned engine rooms at sea and in automated power stations ashore.Module examplesSingle Flex module with separator (excluding heater and pump)Single Flex module with separator, heater and pumpQuadruple Flex modulewith separators, heaters and pumpsDischarge slideCentriLockScope of supplyThe S and P Flex separation concept p rovides a wide range of alternatives for S separators. Depending on the need, a S separator can be supplied as a separator and ancillaries, as a customer-specified module, or as part of a comprehensive p ackage including services and order-specific documentation. These S separators come equipped with energy- efficient IE3 motors.Flex systemA S separator with ancillaries in the form of optimized block components provides full say over the use of space. This allows for local modularization or do-it-yourself assembly.Flex modulesA compact S separator module can be built to a customer-specified configuration from a wide range of modular skids and machine blocks. Multi-modules are possible, as well as mixed modules including one or more S separators and/or P-separators for the simultaneous treatment of different types of mineral oils. All Flex modules are factory tested to ensure faster start-up and commissioning.Features and benefits• Small footprint, high flexibilityThe small separator and the modular nature of the surrounding components allow easy installation and flexible positioning in the engine room.• Alcap technologyA water transducer in the clean oil outlet automatically adjusts the oil/water interphase to maximize separation performance.• High separation efficiencyAn optimized design ensures the best possible separation efficiency from the bowl and disc stack.• CentriShootThe CentriShoot discharge systemgreatly reduces sludge volumes. Its fixed discharge slide flexes gently to expose the discharge ports, thereby eliminating metal-to-metal wear.• CentriLockThe CentriLock bowl-locking system uses a lightweight, non-threaded snap ring. This prevents wear by allowing easy removal without a sledgehammer.• Long service intervalsWear-preventing features like CentriShoot and CentriLock reduce the consumption of spare parts and allow plannedmaintenance to be performed less often. This reduces operating costs.• Easy operation and service T he PLC based EPC 60 controller is designed for “one-button” starts and stops, as well as intuitive menu navi-gation. Information about parameters and alarms can be easily accessed, which simplifies both operation and troubleshooting. The EPC 60 also has a modular construction that enables faster troubleshooting and I/O board replacement.• Remote control and monitoring Using Ethernet or Bus communica-tion, Flex systems and modules based on S separators 921–987 canbe operated and supervised remotely from the c ontrol room. A variety of alarm functions are available as standard, and extra I/O boards can be added to the EPC 60 controller in order to enhance its operating and monitoring capabilities.Optional equipmentFlex separation systems based on S separators 921–987 can be complemented with the following equipment:• Starter (included in module versions)• HEATPAC heaters• Space heating• Additional thermometers• Vibration sensor kit• ALP feed pump• Flow regulating system• Sludge removal kit• Sludge outlet butterfly valve kit• Steam shut-off valve kit• Air pressure reducer valve• P ipe arrangement for multiple modules,including heater cross-connection• Emergency safety shutdown• Remote monitoring and control•Separator lifting tool1 Feed pump2 Heater3 Temperature transmitter4 Safety valve5 Change-over valve6 Process controller7 Pressure transmitter – oil8 Complete regulating valve9 Regulating valve – oil10 Pneumatic shut-off valve11 Valve block water12 Separator13 Pressure transmitter – water14 Drain valve15 Sludge removal kit16 Regulating valveSchematic diagram ALP feed pump HEATPAC CBM heaterHEATPAC EHM heaterOperating principleA Flex separation system based on an S separator 921–987 is operated automatically by the EPC 60 c ontroller. Untreated oil, heated to the correct temperature, is fed continuously to the separator, which is driven by an electric motor via a friction clutch and belt.The separator bowl is fixed at the top of a spindle, which is supported by bearings and special composite springs. During operation, separated sludge and water accumulate at the bowl periphery and are intermittently discharged by the high-precision CentriShoot discharge system.The separator’s operation is based on the Alcap principle, which means the separator automatically adjusts to the nature of the oil. No gravity disc is needed. A water transducer in the clean oil outlet measures capacitative resistance and signals changes to the EPC 60 controller. Depending on the water content, the EPC 60 either opens the drain valve or expels the water through thebowl discharge ports during sludge discharge. A patented paring tube adapts itself to remove the water from the bowl while a paring disc pumps away the clean oil.During normal operation, vital process parameters are monitored. These parameters, as well as alarms, are indicated by easy-to-understand text messages on the LCD display of the EPC 60 controller.The EPC 60 controller provides many alarm functions,including alarms for low oil pressure, high sludge tank level (if the optional sludge removal kit is included) and power failure. Additional functions are available for a vibration alarm when the optional vibration sensor is fitted.System layoutLow-wear mechanical platformS separators 921–987 and P separators 626/636 are built on a low-wear mechanical platform thatfeatures CentriShoot and CentriLock. The CentriShoot discharge system, which greatly reduces sludgevolumes, has a fixed discharge slide that flexes gently to expose the discharge ports, thereby eliminating metal-to-metal wear. The CentriLock bowl-locking system uses a lightweight, non-threaded snap ring that prevents wear by allowing easy removal without a sledgehammer.untr1. Feed pump2. Heater3. Temperature transmitter4. Pressure transmitter, oil5. Pneumatically controlledchange-over valve 6. Control unit7. Pressure transmitter, oil 8. Water transducer9. Pneumatically controlledshut-off valve 10. Regulating valve11. Solenoid valve block, water 12. Separator13. Pressure transmitter, water 14. Drain valveCentriShootInstead of a sliding bowl bottom, the CentriShoot discharge system features a fixed discharge slide that flexes at its edge. This increases discharge accuracy and does away with metal-to-metal wear.CentriLockConventional lock rings are threaded and must be removed with a sledgehammer. Over time, the metal-to-metal wear between bowl and lock ring can lead to expensive bowl repair or replacement.Instead of a conventional lock ring, the CentriLock bowl-locking system features a non-threaded snap ring. This lightweight ring snaps quickly into place and is easilyremoved with only an Allen key.Step one:The CentriShoot discharge slide is fixed at the centre. During separation, the slide covers the discharge ports.An Allen key is the only tool needed to work with CentriLock. No sledgehammer is necessary.Step two:During sludge discharge, the edge of the slide flexes downward, exposing the discharge ports.The CentriLock snap ring lifts out and snaps in easily – without any threads to wear.Step three:After discharge, the slide moves gently back into position to close the ports. This is done hydraulically, without any springs.EMD00233EN 1509Alfa Laval reserves the right to change specifications without prior notification.How to contact Alfa LavalUp-to-date Alfa Laval contact details for all countries are always available on our website at C e n t r i L o c k , C e n t r i S h o o t a n d H E A T P A C a r e t r a d e m a r k s o w n e d b y A l f a L a v a l C o r p o r a t e A B . A L F A L A V A L i s a t r a d e m a r k r e g i s t e r e d a n d o w n e d b y A l f a L a v a l C o r p o r a t e A B .OperationsPreventive maintenance procedures are handled quickly and simply with the help of a compression tool. The snap ring of the patented CentriLock bowl-locking system is non-threaded and requires only an Allen key to remove.• Maintenance intervals:– Inspection Service every 4 000 h or 6 months– Overhaul Service every 12 000 h or 18 months • Service spares kits contain all necessary spare parts for each service and tips for maintenance in checkpoints:– Inspection Kit with O-rings and seals for separator bowl – O verhaul Kit with parts for drive system, belt, bearings and pads, also containing an Inspection Kit– Support Kit with strategic spares for operation and maintenance backup • The System Manual includes detailed information in electronic or printed form:– Installation instructions – Operating instructions– Alarms and troubleshooting – Service and spare parts• Commissioning and technical services are available from allAlfa Laval offices, including start-up assistance and advice on operation and maintenance.• Training in all aspects of oil treat-ment, freshwater generation and heat transfer is available.• All services can be incorporated into specially tailored NonstopPerformance packages. Details are available from local Alfa Laval offices.Max. recommended capacity, l/h HFO 380 cSt/50˚CTechnical dataMain supply voltage 3-phase, 220 V up to 690 V Control voltage 1-phase, 100/110/115/230 V Frequency 50 or 60 HzControl airMin 5 bar, max 8 bar Operating water pressure Min 2 bar, max 8 barFlex system Size (height x width x length)* Net weight (kg)S 921/926/927 970 x 750 x 1075 426S 936/937 1059 x 850 x 1195 500S 946/947 1123 x 850 x 1195 626S 956/957 1291 x 1000 x 1325 835S 966/967 1405 x 1000 x 1325 984S 976/977 1526 x 1250 x 1525 1281S 986/9871713 x 1250 x 1525 1793* Dimensions and weights for Flex systems do not include control cabinet.Flex moduleSize (height x width x length)** Net weight (kg)S 921/926/927 1750 x 750 x 1075 540S 936/937 1750 x 850 x 1195 638S 946/947 1750 x 850 x 1195 761S 956/957 1766 x 1000 x 1325 1042S 966/967 1766 x 1000 x 1325 1191S 976/977 1766 x 1250 x 1525 1525S 986/987 1766 x 1250 x 1525 2026** Dimensions and weights for Flex modules do not include pump and heater.ConformityThe mark of conformity confirms that the equipment complies with European Economics Area (EEA) directives.2 0004 0006 0008 00010 00012 00014 00016 00018 00020 00022 00024 000。
VALSTEAM ADCA ENGINEERING S.A. ADCAMAT POP – PPO-1
INSTALLATION AND MAINTENANCE INSTRUCTIONSADCAMAT POP – PPO-14 – PPA-14 PRESSURE OPERATED PUMPSGENERAL• These instructions must be carefully read before any work involving products supplied by VALSTEAM ADCAENGINEERING S.A. is undertaken.• The installation procedure is a critical stage in a life of the equipment and care should be taken to avoiddamage to the equipment.• They give their maximum performance only when the equipment associated with them is correctly sized andinstalled in accordance with our recommendations.• The POP pumps are designed for condensate pumping, cold water and other group 2 fluids, without the use ofelectricity. They are specially recommended to return high temperature condensate back to boiler houses to save and conserve energy.• The ADCAmat automatic pumps can lift hot condensate, oils and other liquids as high as 60m (200ft) ordischarge against an equivalent total back pressure. The pump starts when there is something to pump and stops when there isn’t.• Liquid flows by gravity into the pump through an inlet check valve lifting a float which at the upper limit of itstravel opens the supply valve which allows steam or compressed air to enter the pump body. Pressure in the pump builds up until just sufficient to overcome back pressure. The pressurized liquid opens the outlet check valve and discharge commences. When the float reaches the minimum lower level, it closes the steam or compressed air supply valve and opens the vent allowing the liquid to fill the pump again, beginning other cycle.Note:• Current regional safety regulations should be taken in to account and followed, while doing the installation andmaintenance work.• Handling, installation and maintenance work must be carried out by trained personnel. A supervisor must followand check all activities.• For the problems that cannot be solve with the help of this instructions, please contact the supplier or themanufacturer.• The manufacturer reserves the right to change the design and material of this product without notice.• If necessary to perform hydrostatic test on the equipment/installation be aware of the limits according to thetable below. The internal mechanism cannot be subject to the hydrostatic test of the body.Press. bar Temp. ºC Press. bar Temp.ºC16501650141001610013195131951225012250165016501319513195Minimum operation temp. : -10ºC; Design code: ASME VIII* Rating according to E N1092:2007LIMITING CONDITIONS*ANSI Cl.150P N16P N16ANSI Cl.150POP-S/PPO-14S/PPA-14S POP-SS/PPO-14SS/PPA-14SSRATING POP-S/PPO-14S/PPA-14S POP-SS/PPO-14SS/PPA14SS PN 1623 bar 26 bar PRE SSURE TE ST [bar] 20ºCCE Marking: the European PED-Pressure Equipment Directive in use and it complies with those requirements.All the sizes fall within category 2, DN100 pump falling in the category IV and PPA-14 falling in the category III. The products carry the CE mark.- If malfunction of any other equipment or system operation failure may result in a dangerous overpressure, over temperature or even vacuum condition, a safety device must be included in the system to prevent such situations.- Do not touch the equipment without appropriate protection during working operation because it may conduct heat if the used fluid is at high temperature.- Before starting maintenance be sure that the equipment is not pressurized or hot. Even if upstream and downstream isolating valves have been closed care should be taken since fluid under pressure may be trapped between them.- The equipments must be used within the working temperature and pressure limits laid down for them, otherwise they may fail (refer to nameplate and/or IS- Information Sheet).- Manual handling of products may present a risk of injury. You are advised to assess the risks taking into account the task, the individual, the load and the working environment.0,80 kg/dm 35º E ngler 10 bar 0,5 bar 11,2 lM inim um m otive pressureP um p discharge per cycle D N 25 to D N 40APPLICATION LIMITS POP LCM inim um density M axim um viscosityM axim um m otive pressure 0,80 kg/dm 35º E ngler 10 bar 0,5 bar 16 l 25 lAPLICATION LIMITS POP-S AN D PPO-14M inim um density P um p discharge per cycle D N 80 x D N 50M axim um viscosityM axim um m otive pressure M inim um m otive pressureP um p discharge per cycle D N 25 to D N 500,80 kg/dm 35º E ngler 10 bar 1 bar 325 l M inim um m otive pressure P um p discharge per cycle DN100 x DN100APLICATION LIMITS POP-S DN100M inim um density M axim um viscosity M axim um m otive pressure 0,80 kg/dm 35º E ngler 10 bar 1 bar 21 lAPLICATION LIMITS PPA-14M inim um density M axim um viscosityM axim um m otive pressure M inim um m otive pressureP um p discharge per cycle D N 80 x D N 50- Do not remove the nameplate attached to the equipment. Serial number and other useful information is stamped on it.- During the assembly work, apply protective measures against dirt.- When connecting flanges, the bolts should be mounted from the counter flange side with the hexagon nuts from the valve side and it must exist a perfect match between the connection flanges.- Tighten flange connection bolts uniformly in a diagonal sequence.- Correct installation of the equipment is full responsibility of the contractor.TRANSPORT AND STORAGE- Handling and lifting of materials should be made with adequate equipments.- Do not damage the paint job. It protects against corrosion during transportation and storage.- The pumps and equipments should be protected from impacts and forces during transportation and storage.- The manufacturer doesn’t assume the responsibility of damaged equipments due to inappropriate handling during the transportation and storage. See figure below for correct position in transportation.Incorrect position Correct positionINSTALLATION- Account for over pressure conditions, according with the local laws or standards.- Pumps must not be used with other purpose than the one they were built for (e.g. climbing aids or as connecting points for lifting gear).- For the problems that cannot be solve with the help of this instructions, please contact the supplier or the manufacturer.- The pump operation is only guarantee if ADCA non-return valves are used. When installing and uninstalling these valves, care should be taken to prevent any position inversions during the installation (in those cases where the DN is the same), because they have different settings.- A strainer installation is highly recommended in the condensate feeding to the pump for non-return valves protection. The strainer shall be cleaned after the commissioning and then with some regularity. If this requirement is not accomplished, it can cause a feeding restriction into the pump, reducing significantly the pumping capacity.Installation area requirements:•The installation area should have easy access and provide enough space for maintenance and removing operations.•The installation area should have the necessary firing system to prevent damage of the equipment due to over temperature/pressure cause by fire.Procedure:•Prior to install check that the product is suitable for the intended application: materials and pressure/temperature ratings.•Before installing remove, plastic covers placed on flanges or connection ends. The equipment has an arrow or Inlet/Outlet designations. Be sure that it will be installed on the appropriate direction.•Take care with jointing material to ensure that none may be permitted to block or enter the equipment.•The pump must be handled carefully in order to avoid any mechanism damage.•The pump must be installed at the lower level of the equipment to be drained and the exhaust DN 1”connection pointing upwards.•For the correct installation and operation of the pump, Y strainer, isolating valves and steam trap must be provided. Please refer to Information Sheet IS 9.101 E. Special application information can be obtained by contacting the distributer or Valsteam SA directly.•Ensure that the unit is leveled for proper operation.•External stresses that may be induced by the system due to pipe expansion, etc, can affect this product. The necessary precautions are recommended during the systems design and equipment assembly.•The pipework should be properly supported and free from strain and it should not be subjected to undue surges of pressure. The start-up condition should be considered.START UP- Current regional safety regulations should be take in to account and followed.- Protective insulation and warning notice may be required.- Until the start up of an existing or a new plant, the following must be checked:- All works are completed.- The equipment is correctly installed.- All the necessary safety devices have been installed.- At start up, the presence of small particles in the motive fluid (dirt, scale, weld splatters, joint particles, remains of Teflon tape, etc) may cause anomalies. If this occurs, proceed to an accurate cleaning. Periodical checking:•24 hours after the start up, it is recommended to check pipe connections for leaks and retighten the connections if necessary.MAINTENANCE•We recommend the pumps to be serviced as necessary. Pumps should be checked periodically (at least yearly), to verify if they are operating correctly and to verify the wear of the internal parts specially the motive fluid admission and exhausting valves.•When reassembling make sure that all gasket faces are clean and always use a new gasket. Tighten cover bolts uniformly in a diagonal sequence.•Estimated lifetime under satisfactory working conditions: 5 years; after this period, we recommend the wall thickness examination using appropriated inspection equipment. Pour quality water or corrosive fluids will reduce this period.•Always apply the mentioned torques, see recommended tightening torques table when maintenance operations are carried out.•Maintenance should proceed as follows:1. Isolation valves should be closed, and the pressure and temperature must be atmospheric.2. Remove the type of connections used.3. Execute the maintenance work.4. Replace and tighten the connections. (Don’t forget to subst itute the gasket).5. Consider the start up conditions.TROUBLESHOOTING- If the malfunctions cannot be solved with the help of the following chart, please consult the manufacture.- Some of these faults may only occur in some models.TROUBLE SHOOTING CHARTFAULT POSSIBLE REASON SOLUTIONContinuasly leak through the exaust. Motive fluid admission/exhaust valves damaged.Replace.Premature erosion of admission valve. Pour quality steam.Check the trapping of the motivefluid (steam).Pump stops to work. Broken spring *Float with water in the interior *Replace.Replace.Blocked in the maximum/lowestlevel.Detuned. Readjust (See Figure 1).Pump discharge capacity isdecreasingClogged/obstructed strainer Clean or replace the filter element * Manufacture to be informed. The life time of this component is assured beyond the guarantee validity.SPARE PARTSPOP-S (Till DN80), PPO-14 and PPA-14POP LCPOP-SA.95.5800.025 INLET/OUTLET VALVES ALL 4, 5 1 Set A.95.5800.125FLOAT AND GASKET ALL 3, 7 1 Set A.95.5800.225SPRING SET ALL 8 1 Set A.95.5800.325COVER GASKETALL 3 1 Set A.95.5500.025PPA-14 INLET/OUTLET VALVES 804, 5 1 Set A.95.5500.125PPA-14 FLOAT AND GASKET 803, 7 1 Set A.95.5500.225PPA-14 SPRING SET 808 1 Set A.95.5500.325PPA-14 COVER GASKET803 1 Set A.61.1140.025A INLET ADCAMAT NON RETURN VALVE 259.21A.61.1140.040A INLET ADCAMAT NON RETURN VALVE 409.21A.61.1140.050A INLET ADCAMAT NON RETURN VALVE 509.21A.61.1140.080A INLET ADCAMAT NON RETURN VALVE 809.21A.61.1140.025B OUTLET ADCAMAT NON RETURN VALVE 259.11A.61.1140.040B OUTLET ADCAMAT NON RETURN VALVE 409.11A.61.1140.050B OUTLET ADCAMAT NON RETURN VALVE509.11CODEDESIGNATIONQTY.POS.NR.SIZEDNPPO-14 PPA-14POP-S DN100How to replace Inlet/Outlet valves on POP LC (till DN40), POP-S and PPO-14 (till DN80):1. With the float at the lowest position remove the bolts Nr.21 and disassemble the support Nr.15.2. The valve set is supplied duly calibrated from the factory. Do not unscrew the nuts Nr.17A and 19A.POP-S DN100 -FLOAT AND GASKET 3, 5 1 set -COVER GASKET 3 1 set -INLET/OUTLET VALVES - 1 set SPRING SET- 1 set -INLET ADCAMAT NON RETURN VALVE 71-OUTLET ADCAMAT NON RETURN VALVE61CODE DESIGNATIONQTY.POS.NR.Adjustment of upper level switch on POP-S and PPO-14 till DN80:1. Tighten up screw nr.18A - decrease maximum level.2. Untighten the screw nr.18A - increase maximum level. Adjustment of lower level switch on POP-S and PPO-14 till DN80:- The screws must not be adjusted without specific factory information.STROKE COUNTER- In order to ensure that the stroke counter works reliably, it is recommended a minimum backpressure of at least 500mbar on the pump´s outlet RD40 check valve. If this value cannot be achieved, we recommend a RD40 with a strongest spring in the pump outlet connection.PRODUCTS RETURNING- Information regarding any hazards and precautions to be considered because of contaminating fluids and residues or mechanical damage that may represent a health, safety or environmental risk, must be provided in writing by the distributors and costumers when returning products to Valsteam ADCA engineering.- Health and safety data sheets regarding substances identified as hazardous or potentially hazardous must be provided with the information mention above.- LOSS OF WARRANTY: Total or partial disregard of above instructions involves loss of any right to warranty.。
安全光栅GuardShield 450L-E说明书
The Allen-Bradley® GuardShield™ 450L-E Safety Light Curtains fromRockwell Automation are based on a unique patented transceiver technology which allows each stick to be used as a transmitter or as a receiver. The full functionality of a transceiver is provided by plug-ins inserted at the bottom of the sticks. By using only one stick type with the optimal plug-ins selected based on the requirements of the application, the GuardShield 450L portfolio is a simple, cost effective solution that offers enhanced flexibility while maintaining the highest level of safety.The enhanced Integrated Laser Alignment System (ILAS) of the GuardShield 450L-E reduces installation time by providing multiple visible laser points that optimize setup with a simple touch of the ILAS symbol on the front window of the stick. Plus, the compact design and full length protective field make it easy to integrate a GuardShield 450L-E system in hand and finger protection applications from 150 mm (5.9 in.) up to 1950 mm (76.7 in.) in increments of 150 mm (0.5 ft).The enhanced GuardShield 450L-E light curtain system is also ideal for special applications requiring advanced functions such as muting and blanking,easily set up through DIP switches located on the dedicated plug-in modules. For muting, the common set ups like 4-sensor or 2-sensor with L- and T-configuration and override function can be selected. Blanking, reducedresolution, floating blanking and teach-in fixed blanking features are available. Configure up to eight protection zones via CCW software. A cascading plug-in can also be installed for series connection of additional GuardShield 450L Safety Light Curtain systems for multi-sided machine guarding (up to four sides). All these special functions combined with the inherent flexibility of the GuardShield 450L transceiver design help to simplify your engineering logistics and minimize the stock required to address your full range of applications.For configuration, monitoring and troubleshooting, our free Connected Components Workbench software is available at our website. A separate optical interface tool is required if using Connected Components Workbench software for diagnostic information.Features and Benefits• Extended features and functionality compared to the 450L-B such as cascading, built-in muting,blanking and multiple applications configuration• Embedded functions configured quickly and easily via DIP switches or software, significantly reducing engineering effort. These include:– M uting, blanking, start mode, external device monitoring (EDM), scanning range• Leverages patented transceiver technology – each stick can be used as a transmitter or receiver via innovative plug-in modules• Enhanced Integrated Laser Alignment System (ILAS) for quick installation and reliable operation• Active protective field provides sensing over the entire length of a transceiver• Compact design 30 mm x 30 mm (1.18 in. x 1.18 in.)• Wide range of protection heights 150…1950 mm (5.9…76.7 in.) in increments of 150 mm (0.5 ft)• Resolutions:– F inger resolution (14 mm): 0.5 to 9 m (1.64…29.53 ft)– H and resolution (30 mm): 0.9 to 16.2 m (2.95…53.15 ft)• Supports cascading of multiple systems in series• Flexible mounting options allow for quick and easy installation• Configure, monitor and troubleshoot via Connected Components Workbench (CCW) software.Pre-configure multiple configurations. • IP65 enclosure rating• TÜV certified Type 4 IEC 61496-1/-2, Ple, SILcl3 per EN ISO 13849-1,IEC 62061Allen-Bradley GuardShield 450L-E Safety Light CurtainEnhanced Flexibility and Advanced Features in a Cost-Effective Safety SolutionRequired Accessories 1Replace the x with 2 (6.6 ft), 5 (16.4 ft), 10 (32.8 ft), 15 (49.2 ft), 20 (65.6 ft), or 30 (98.4 ft) for available lengths in metersOptional Accessories*Requires 450L fw version 4.00x and CCW R12 at minimum.1xxxx = 0150…1950 mm (0.5…6.4 ft) in increments of 150 mm (0.5 ft)Innovative plug-in modulesestablish transceiver as an emitter orreceiver and provide other advanced functions.Integrated Laser Alignment System accelerates setup for optimal performance at the touch of a button.General Ordering InformationLight Curtain System: Order two identical transceivers/catalog numbers. Plug-in Modules: Order one transmitter and one receiver plug-in with the desired functionality for one system – or – Order two universal plug-ins for one system. Each universal plug-in can be used as a transmitter or a receiver. To cascade systems or for muting options use thecascading plug-in.1xxxx = 0150 … 1950 mm (0.5 … 6.4 ft) in increments of 150 mm (0.5 ft).For example: “450L-E4HL 0900YD” indicates an order for 900 mm hand detection light curtain transceiver.2Optional side mounting bracket kit is available below.1 The 8-pin transmitter plug-in option allows two 8-pin cordsets to be used in one system.2Order two universal plug-ins for one system. Each universal plug-in can be used as a transmitter or a receiver.Publication 450L-PP002B-EN-P – May 2020 | Supersedes Publication 450L-PP002A-EN-P – January 2018Copyright © 2020 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.Allen-Bradley, Connected Components Workbench, Expanding human potential and GuardShield are trademarks of Rockwell Automation, Inc.Trademarks not belonging to Rockwell Automation are property of their respective companies.Connect with us.。
大字数显示器 (Model LDD) 说明书
O WIDE SELECTION OF INPUT MODULES O 3.32 INCH (84.4 mm) HIGH DIGITS O 115/230 VAC SWITCH SELECTABLE O RUGGED STEEL CONSTRUCTION O AVAILABLE IN 4 OR 6-DIGIT VERSIONSO AVAILABLE WITH RED OR GREEN LED DISPLAY O SEALED FRONT PANEL CONSTRUCTION (NEMA 4/IP65)O VERSATILE MOUNTING OPTIONSOTEMPLATE PROVIDED FOR EASY INSTALLATIONDESCRIPTIONThe Large Digit Display, Model LDD, is a versatile display which can increase your productivity by offering your plant floor or production area a visual display of their current status, such as counting, rate indication, real time,or any engineering unit required. The LDD is available in either a 4-digit or a 6-digit display version with Red or Green LED displays, that accepts a selection of personality boards to meet your specific application needs (see Personality Module Bulletins for more information).There are four panel wiring knock-outs provided, two 7/8" (22.2 mm)knock-outs and two 1/2"(12.7 mm)knock-outs. Also provided is a removeable cover located on the rear panel which will expose one open ended cut-out for easy wire installation.The LDD has a sealed front panel which meets NEMA 4/IP65 requirements for wash-down and dusty environments when properly installed. The 3.32"(84.4 mm)digits are readable to 130 feet (40 M).SAFETY SUMMARYAll safety related regulations, local codes and instructions that appear in the manual or on equipment must be observed to ensure personal safety and to prevent damage to either the instrument or equipment connected to it. If equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.SPECIFICATIONS1. DISPLAY:3.32" (84.4 mm)High, Red or Green LED display.2. POWER REQUIREMENTS:Switch selectable 115/230 V AC (±10%),50/60 Hz, 17 V A 4-digit, 21 V A 6-digit (including module).3. CONSTRUCTION:Steel construction textured with polyurethane paint for scratch and corrosion resistance protection. Front panel meets NEMA 4/IP65requirements for indoor use when properly installed. Installation Category II,Pollution Degree 2. (Panel gasket included with unit.)4. ENVIRONMENTAL CONDITIONS:Operating Temperature : SEE MODULE LITERATURE Storage Temperature : -40 to 70°COperating and Storage Humidity : 85% max. relative (non-condensing)over operating rangeAltitude : Up to 2000 metersMODELLDD - LARGE DIGIT DISPLAYSPECIFICATIONS (Cont’d) Array 5. CERTIFICATIONS AND COMPLIANCES:SAFETYIEC 61010-1, EN 61010-1: Safety requirements for electrical equipmentfor measurement, control, and laboratory use, Part 1.IP65 Enclosure rating (Face only), IEC529Type 4 Enclosure rating (Face only), UL50EMC EMISSIONS:Meets EN 50081-2: Industrial Environment.EMC IMMUNITY:Meets EN 50082-2: Industrial Environment.Refer to individual personality module specifications for aditional information.6. MOUNTING REQUIREMENTS:Max. panel thickness is 0.375" (9.5 mm).Min. panel thickness for NEMA4/IP65 sealing is 0.125" (3.2 mm).7. WEIGHT: 8 lbs (3.6 kg) (less module).Disconnect all power before installing or removing module. SET-UPTo place the personality module into the LDD, first remove the rear coverby unscrewing the two captive fasteners. Then, before installing the moduleinto the LDD, configure the module for the specific application by SETTINGALL APPLICABLE DIP SWITCHES AND JUMPERS AT THIS TIME (seeaccompanying module data sheet). Place the module on the plastic standoffs(see figure 1). Push on the four posts as shown in figure 2 until the carrier snapsinto place.Note: Power should NOT be applied until the terminal block is plugged into themodule AND the module is properly installed into the Large Digit Display. Select the proper voltage by setting the switch to either 115 or 230 volts. Connect the display and power cables on the module to the appropriate connectors on the power supply board (see figure 2).To program the Intelligent Meter, three normally open momentarypushbuttons are connected to “P”, “UP”, “DOWN”, and common of the LDD(not included with the Intelligent Meter). The Model PGM is a small plasticcase with three normally open momentary pushbuttons and 10 feet (3 M)ofshielded cable, and is well suited for programming the Intelligent Metermodule. Although, any normally open, momentary pushbutton switches can beused. (SEE APPROPRIATE MODULE LITERATURE FOR SET-UP ANDOTHER CONNECTIONS.)To remove module from the LDD, disconnect the display and power cables,then remove the carrier from the standoffs by disengaging the tabs andsimultaneously lifting the carrier. Repeat this until the module has cleared all 4standoffs.INSTALLATION ENVIRONMENTThe unit should be installed in a location that does not exceed the maximumoperating temperature and provides good air circulation. Placing the unit neardevices that generate excessive heat should be avoided.The LDD may be cleaned using alcohol compounds such as Isopropanol ormethanol. Also, liquid glass cleaners may be used if they do NOT containammonia.NOTE: MINIMAL EXPOSURE OF KETONE SOLVENTS TO THE LDD ISGOING TO CAUSE A WHITENING OF THE DISPLAY OVERLAY. Continuous exposure to direct sunlight may accelerate the aging process of the bezel.The LDD is intended to be mounted into an enclosed panel with a gasket toprovide a water-tight seal. A gasket and ten 10 to 32 kep nuts are provided foreasy installation. The recommended minimum panel thickness for NEMA4/IP65 applications is 0.125" (3.2 mm). Thinner panels may be used but maydistort and not provide a water-tight seal.For ease of installation, the cardboard template (supplied with the LDD)maybe used to mark the holes and cut-out locations on the panel. After the panelcut-out has been completed and deburred, insert the unit with the panel gasket,into the panel as depicted in the drawing (see figure 3). Install the ten kep nutsand tighten evenly for uniform gasket compression.By using additional hardware, the LDD can be surface-wall mounted,suspended, or bottom mounted. To surface-wall mount the unit, two sets ofMB6 brackets are required. To suspend or bottom mount the unit, one set ofMB6 brackets is required.1. TOTALIZER2. LINEARIZER 4-20 mA MODEL NO.DESCRIPTION+18 VDC 3. PEAK/VALLEYDUAL SERIAL ANALOG PART NUMBEREXCITATION 4. TARE ALARM OUTPUTOUTPUT5. E2-CON6. EFFICIENCYIntelligent Meter Modules NO NO NO NO NO PBD10000For Decade Voltage Inputs *YES NO NO NO NO PBD10100PBD1YES NO YES NO NO PBD10102(See IMD1 Bulletin for operating YES 1, 2, 3, 4, 5NO NO NO PBD13100Specifications.)YES 1, 2, 3, 4, 5YES YES YES PBD13107Intelligent Meter Modules NO NO NO NO NO PBD20000For Decade Current Input *YES NO NO NO NO PBD20100PBD2YES NO YES NO NO PBD20102(See IMD2 Bulletin for operating YES 1, 2, 3, 4, 5NO NO NO PBD23100Specifications.)YES 1, 2, 3, 4, 5YES YES YES PBD23107Intelligent Serial Slave Display Module *20 mA SRC 3, 5NO YES NO PBA04101PBA(See IMA Bulletin for operating 20 mA SRC 3, 5YES YES NO PBA04104Specifications.)20 mA SRC 3, 5YES YES YES PBA04107+12 VDC 1, 2, 3, 5, 6NO NO NO PBI04100Intelligent Digital Rate Meter *+12 VDC 1, 2, 3, 5, 6NO YES NO PBI04101PBI(See IMI Bulletin for operating +12 VDC 1, 2, 3, 5, 6YES NO NO PBI04102Specifications.)+12 VDC 1, 2, 3, 5, 6NO NO YES PBI04103+12 VDC 1, 2, 3, 5, 6YES YES YESPBI04107PGMProgramming BoxPGM00000* Note: All the above Intelligent Meter modules require a 6-digit Large Digit Display, Model LDD00600 or LDD0G600.ORDERING INFORMATION FOR APOLLO INTELLIGENT METER MODULESORDERING INFORMATIONFOR APOLLO PERSONALITY MODULESPERSONALITY MODULESThe following Apollo and IM capabilities are available as modules for the TROUBLESHOOTINGFor further technical assistance, contact technical support at the appropriate company numbers listed.LIMITED WARRANTYThe Company warrants the products it manufactures against defects in materials and workmanship for a period limited to two years from the date of shipment, provided the products have been stored, handled, installed, and used under proper conditions. The Company’s liability under this limited warranty shall extend only to the repair or replacement of a defective product, at The Company’s option. The Company disclaims all liability for any affirmation, promise or representation with respect to the products.The customer agrees to hold Red Lion Controls harmless from, defend, and indemnify RLC against damages, claims, and expenses arising out of subsequent sales of RLC products or products containing components manufactured by RLC and based upon personal injuries, deaths, property damage, lost profits, and other matters which Buyer, its employees, or sub-contractors are or may be to any extent liable, including without limitation penalties imposed by the Consumer Product Safety Act (P.L. 92-573) and liability imposed upon any person pursuant to the Magnuson-Moss Warranty Act (P.L. 93-637), as now in effect or as amended hereafter.No warranties expressed or implied are created with respect to The Company’s products except those expressly contained herein. The Customer acknowledges the disclaimers and limitations contained herein and relies on no other warranties or affirmations.。
Iloform FST 14 安全技术说明书
Iloform FST 14GHS化学品标识化学品的推荐用途和限制用途化学品安全技术说明书Iloform FST 14459498安全技术说明书号码供应商嘉实多（上海）管理有限公司中国上海市桂桥路255号5幢3层 201206Tel:+86 21 38605888Carechem: 400 120 6011 (24/7)紧急电话号码物质/混合物的使用金属加工液-油性。
如果需要特殊用途建议， 请参考恰当的技术数据表或者咨询我们公司的代表。
产品代码459498-CN04安全技术说明书根据 GB/ T 16483-2008 和 GB/ T17519-2013不受管制。
危险性类别信号词无信号词。
危险性说明没有明显的已知作用或严重危险。
防范说明预防措施不适用。
事故响应不适用。
安全储存不适用。
废弃处置不适用。
其他危害使皮肤脫脂。
GHS标签要素基础油 - 高精炼≥50 - ≤75多样 - 请参阅 缩略语和首字母缩写溶剂精制的重石蜡烃馏份(石油)≤1064741-88-4加氢石油重烷烃馏分≤1064742-54-7溶剂脱蜡重质蜡族石油馏分≤1064742-65-0C10-16 烷基衍生物代苯磺酸钙盐≤568584-23-6石油磺酸钙盐≤361789-86-4单C16-24烷基苯磺酸衍生物钙盐≤370024-69-0组分名称CAS号码%就供应商知识范围以及适用浓度规定，本产品不存在其他必须在节此列出的对健康或环境有毒有害的物质。
物质/混合物职业暴露限制, 如果有的话, 列在第 8 节中。
混合物高精炼矿物油及添加剂。
禁止催吐，除非有专业医疗人士指导。
如果出现症状，寻求医疗救护。
如接触，请立即以大量清水冲洗眼睛至少 15 分钟。
将眼皮翻开冲洗，以确保彻底洗净。
检查和取出任何隐形眼镜。
寻求医疗救护。
用肥皂与水彻底清洗皮肤，或使用认可的皮肤清洁剂清洗。
脱去受污染的衣服和鞋子。
衣物重新使用前应清洗。
鞋子在重新使用前应彻底清洗。
14Q-基础介绍
14 Q-Basics介绍 RGC/OP-TEQ14Q 之“人员”与人员相关的3个Q–意识关注我们对客户投诉的态度–反应如何应对质量问题–指示合格的质量依靠哪些标准意识反应指示14Q 之“人员”—— Q1 意识原则 1：意识④与生产相关的顾客抱怨（内部/外部）均全厂通报，并显示在所有受影响的工位。
④根据8D方法迅速且系统地解决相关问题。
*④携同生产管理部门，可能还要携同质量管理部门执行标准化审查流程。
在评估可视化措施的效率后，与制造管理部门、质量管理部门共同做出结束可视化的决定。
原则 1：意识❑我们最近一次收到的顾客抱怨是什么情况（考虑产品审核和 TCR）？❑我们如何获知顾客抱怨？▪通过经理和/或 Q-通知❑8D 指什么？▪8D 是解决问题的方法▪‘8D’（解决问题的八个步骤）❑质量参考、现行的 8D 报告放置在生产区的什么位置？14Q 之“人员”—— Q2 反应原则 2: 反应④明确界定并最终应用控制限制。
④在出现偏差或超出的情况下，应当按照规定的升级计划反应。
④如果工艺已停止，则应当按照明确规定的程序重新启动。
④为重新启动规定了明确的职责。
原则 2: 反应❑当我意识到工位上出现偏离标准的偏差时，我该怎么做？▪按照升级计划采取行动并通知经理❑在生产线中断后重新启动的释放程序是什么？用于记录计划外更改/故障的工位日志簿14Q 之“人员”—— Q3 指示原则 3：指示④所有的指示（安全、质量、健康、制造、5S-等）均可以让所有参与的人员理解、获取。
④设置控制回路，保持指示一致性。
原则 3：指示❑我的工作场所中有哪些工作指示和测试指示？▪例如过程相关、生产相关、质量相关的标准❑指示中记录了哪些内容？▪我生产、检查的内容和方式❑有哪些 5S 标准？14Q 之“机器”与机器相关的6个Q–过程参数如何确保产出合格的产品–校准如何确保我们正确地了解参数状态–模拟测试模拟测试的可靠性–维护设备的稳定性如何实现–工具维持质量水平稳定的关键–重新启动中断后如何恢复校准模拟测试维护工具过程参数重新启动14Q 之“机器”—— Q4 过程参数原则 4：过程参数④所有既定过程参数满足目标值/误差的要求。
SABIC PC 1414 物性表
LEXAN* EXL1414T ResinPolycarbonateSABIC Innovative Plastics/prospectorTechnical Data1of 4Form No.TDS-78422-entemperature (-40°C)ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IMcycle times compared to standard PC.Lexan EXL1414T resin is a general purpose product available in transparent and opaque colors and is an1Features •Copolymer •Ductile•Fast Molding Cycle •General Purpose •Good Processability •Medium FlowUses •General Purpose Appearance•Clear/Transparent •OpaqueProcessing Method •Injection MoldingSpecific Gravity1.19g/cm³ISO 1183Melt Mass-Flow Rate (MFR)(300°C/1.2kg)10g/10min ASTM D1238Melt Volume-Flow Rate (MVR)(300°C/1.2kg)9.50cm³/10minISO 1133Molding Shrinkage Internal MethodFlow:3.20mm0.40to 0.80%Across Flow:3.20mm 0.40to 0.80%Water Absorption ISO 62Saturation,23°C0.12%-- 42190MPa ASTM D638--2310MPa ISO 527-2/1Tensile StrengthYield 557.6MPa ASTM D638Yield56.8MPa ISO 527-2/50Break 559.1MPa ASTM D638Break55.3MPa ISO 527-2/50Tensile ElongationYield 5 5.6%ASTM D638Yield5.4%ISO 527-2/50Break 5120%ASTM D638Break110%ISO 527-2/50Flexural Modulus50.0mm Span 62180MPa ASTM D790-- 72120MPa ISO 178Flexural Strength-- 7, 888.6MPa ISO 178Yield,50.0mm Span 692.0MPaASTM D7902of 4Form No.TDS-78422-enCharpy Notched Impact Strength-30°C 60kJ/m²23°C70kJ/m²Charpy Unnotched Impact Strength 9ISO 179/1eU-30°C No Break 23°CNo BreakNotched Izod Impact-30°C 710J/m ASTM D25623°C 820J/mASTM D256-30°C 1055kJ/m²ISO 180/1A 23°C 1065kJ/m²ISO 180/1A Unnotched Izod Impact Strength 10ISO 180/1U-30°C No Break 23°CNo BreakInstrumented Dart Impact ASTM D3763-30°C,Total Energy 77.4J1.8MPa,Unannealed,3.20mm 121°C ASTM D6481.8MPa,Unannealed,64.0mm Span 11116°C ISO 75-2/Af Vicat SofteningTemperature--139°C ASTM D1525 12ISO 306/B120 12--138°C ISO 306/B50Ball Pressure Test (125°C)PassIEC 60695-10-2CLTEFlow:-40to 95°C 0.000067cm/cm/°C ASTM E831Flow:23to 80°C0.000067cm/cm/°C ISO 11359-2Transverse:-40to 95°C 0.000080cm/cm/°C ASTM E831Transverse:23to 80°C 0.000080cm/cm/°CISO 11359-2RTI Elec 130°C UL 7460.800mm HB 3.00mmV-2 Glow Wire Flammability Index (3.00mm)960°CIEC 60695-2-12Glow Wire Ignition Temperature IEC 60695-2-130.800mm 850°C Haze (2540µm) 3.0%ASTM D1003Drying Time3.0to4.0hr3of 4Form No.TDS-78422-enSuggested Max Moisture 0.020% Suggested Shot Size 40to 60% Rear Temperature 271to 293°C Middle Temperature 282to 304°C Front Temperature 293to 316°C Nozzle Temperature 288to 310°C Processing (Melt)Temp 293to 316°C Mold Temperature 71.1to 93.3°C Back Pressure 0.345to 0.689MPaScrew Speed 40to 70rpm Vent Depth0.025to 0.076mmNotes1 These links provide you with access to supplier literature.We work hard to keep them up to date;however you may find the most current literature from the supplier.2A UL Yellow Card contains UL-verified flammability and electrical characteristics.UL IDES continually works to link Yellow Cards to individual plastic materials in Prospector,however this list may not include all of the appropriate links.It is important that you verify the association between these Yellow Cards and the plastic material found in Prospector.For a complete listing of Yellow Cards,visit the UL Yellow Card Search.3 Typical properties:these are not to be construed as specifications.4 50mm/min5 Type I,50mm/min6 1.3mm/min7 2.0mm/min8 Yield980*10*3sp=62mm 10 80*10*31180*10*4mm12Rate A (50°C/h),Loading 2(50N)4of 4Form No.TDS-78422-enWhere to BuyPittsfield,MA USATelephone:800-845-0600Web :/Telephone :800-531-7106Web :/Availability :North AmericaFounded in1986and based in Laramie,Wyoming,IDES is now part of the UL family of companies.UL is a premier global independent safety science company with more than a century of proven history.Employing nearly10,000 professionals in over100countries,UL has five distinct business units--Product Safety,Environment,Life&Health, Knowledge Services and Verification Services--to meet the expanding needs of our customers and to deliver on our public safety mission.Alternative Resins Search–find replacement plastics within minutes.Automotive Plastics Search–easily locate automotive approved plastics.Curve Data–view,overlay and export curve data.For more information,call:800.788.4668or307.742.9227ext.220。
GF Piping Systems 14M 产品说明书
GF Piping Systems14M产品说明书0114 M产品目录1、 概述2、 注意事项3、 工作条件4、 电动执行器5、 阀体技术规格6、 执行机构接线图7、 执行机构调节8、 阀门装配9、 备件021、概述该手册主要介绍了执行器的安装、使用、维护及仓库保存，请仔细阅读以下说明。
危险性通知；用于警示操作者，可能出现的危害人身，及财产安全，操作者应该严格按照手册内容操作阀门。
2、注意事项本产品可以在室内或者室外使用；电动执行器属于非防爆产品，请注意避开易燃、易爆等环境；在长期有雨水或阳光直射的环境下，需要给电动执行器加装保护整个执行器的防护装置；注意执行器、阀门使用的环境温度；安装时需要考虑预留接线和维修的空间；在通电时，不能拆开驱动装置和阀门；在通电时，不能做配线工程；绝对禁止落下物品对产品造成的冲击，这会导致产品动作不良；绝对禁止踏上产品，这会引起驱动装置故障或人员摔落等事故；雨天或在有水花状态下，绝对禁止做配线工程；电动执行器不能开盖接线、换线，否则会对电动执行器密封性造成破坏。
3、工作条件工作介质：电力（交流&直流）电源接口：电缆线使用寿命：2万次 （寿命测试条件：额定负载15Nm，环境温度为25°C ，湿度为50%的工厂环境下 开关时间为15秒所测得，不同的负载和使用环境对测试结果会有不同的影响。
）※在同一控制触点下不可将两台或多台执行器并联使用0304型号EAM002NEAM002T电气参数额定电压220V AC 50/60HZ AC/DC 24V 220V AC 50/60HZ AC/DC 24V 工作电压范围AC190-250V DC22-28V AC95-265V/DC100-300V AC18-26V/DC22-32V功耗13.2W @运行0.0W @保持9.6W @运行0.25W @保持9.6W @运行0.12W @保持9.6W @运行0.85W @保持峰值电流@额定电压60mA @ 5ms450mA @ 5ms/ 500mA @ 5ms35mA @ 5ms @ AC230V350mA @ 5ms @DC24V保险丝规格1A2A1A2A电气接口7×0.2mm 电缆，耐压AC300V功能参数额定扭矩20N.m @额定电压回转角度90±2°最大回转角度360°手动操作配套六角扳手，在断电下使用运转时间约15秒约10秒位置指示机械指示器工作条件电气等级I 类（接地保护）III 类（安全低压）I 类（接地保护）III 类（安全低压）阻燃等级 1.6mmHB/UL94测试方法防护等级IP67绝缘电阻100M Ω/1500VDC 100M Ω/500VDC 100M Ω/1500VDC 100M Ω/500VDC 耐压等级1500V @ 1分钟500V @ 1分钟1500V @ 1分钟500V @ 1分钟环境温度-20°C~60°C 非工作温度≤ -40°C 或≥ 80°C 环境湿度5-95% RH 相对湿度，无结露冲击≤ 300m/S振动10~55HZ ，1.5mm 双振幅型号EAM006NEAM006T电气参数额定电压220V AC 50/60HZ AC/DC 24V 220V AC 50/60HZAC/DC 24V 工作电压范围AC190-250V AC/DC 22-28V AC190-250V AC/DC 22-28V 功耗55W @运行0.0W @保持50W @运行0.0W @保持55W @运行0.5W @保持50W @运行0.5W @保持峰值电流@额定电压0.3A @ 5ms2.5A @ 5ms0.3A @ 5ms2.5A @ 5ms保险丝规格2A10A2A10A电气接口端子接线排5A/600V 9 x (0.5-1.0) mm功能参数额定扭矩60N.m @额定电压回转角度90±2°最大回转角度90°/180°≤330°手动操作配套六角扳手，在断电下使用运转时间约15秒约10秒位置指示机械指示器工作条件电气等级I 类（接地保护）III 类（安全低压）I 类（接地保护）III 类（安全低压）阻燃等级 1.6mmHB/UL94测试方法防护等级IP67绝缘电阻100M Ω/1500VDC 100M Ω/500VDC 100M Ω/1500VDC 100M Ω/500VDC 耐压等级1500V @ 1分钟500V @ 1分钟1500V @ 1分钟500V @ 1分钟环境温度-20°C~60°C 非工作温度≤ -40°C 或≥ 80°C 环境湿度5-95% RH 相对湿度，无结露冲击≤ 300m/S振动10~55HZ ，1.5mm 双振幅（EAM006N & EAM006T ）4、电动执行器a 、技术参数EAM002N & EAM002T05b 、尺寸图EAM002N & EAM002T型号EAM011NEAM011T电气参数额定电压220V AC 50/60HZ AC/DC 24V 220V AC 50/60HZAC/DC 24V 工作电压范围AC190-250V DC22-28V AC190-250V AC/DC22-28V 功耗80W @运行0.0W @保持70W @运行0.0W @保持80W @运行0.6W @保持70W @运行0.6W @保持峰值电流@额定电压0.7A @ 5ms3.5A @ 5ms0.5A @ 5ms3.5A @ 5ms保险丝规格2A10A2A10A电气接口端子接线排5A/600V 9 x (0.5-1.0) mm功能参数额定扭矩110N.m @额定电压回转角度90±2°最大回转角度90°/180°≤330°手动操作配套六角扳手，在断电下使用运转时间约15秒约10秒位置指示机械指示器工作条件电气等级I 类（接地保护）III 类（安全低压）I 类（接地保护）III 类（安全低压）阻燃等级 1.6mmHB/UL94测试方法防护等级IP67绝缘电阻100M Ω/1500VDC 100M Ω/500VDC 100M Ω/1500VDC 100M Ω/500VDC 耐压等级1500V @ 1分钟500V @ 1分钟1500V @ 1分钟500V @ 1分钟环境温度-20°C~60°C 非工作温度≤ -40°C 或≥ 80°C 环境湿度5-95% RH 相对湿度，无结露冲击≤ 300m/S振动10~55HZ ，1.5mm 双振幅EAM011N & EAM011T06c、主要部件序号部件材料1执行器本体耐热ABS 2阀位指示窗透明AS 3螺钉x43044手动轴3045手动轴油封NBR (丁腈)6LOGOPVC7六角扳手固定卡耐热ABS 8六角扳手工具钢9防水电缆接头NiLon (尼龙)10上下盖密封件NBR (丁腈)序号部件材料1执行器本体耐热ABS 2阀位指示窗透明AS 3螺钉x43044手动轴3045手动轴油封NBR (丁腈)6LOGOPVC7六角扳手固定卡耐热ABS 8六角扳手工具钢9防水电缆接头NiLon (尼龙)10上下盖密封件NBR (丁腈)11接线盒盖耐热ABSEAM006N & EAM006T & EAM011N & EAM011TDM mm DN mm d mm kv 100I/mm(△p=1 bar)Cv 100US gal./min(△p=1 psi)kv 100m /h(△p=1 bar)502631470103886521/2752200154132803903000210180100411065004553901255140115008056901506160166001162100020082253960027722380KV值B 、流量特性曲线和KV 值X 开度的(角度)%，Y 流量KV 或者CV 的%。
SmartLine STT850智能温度传感器说明书
SmartLineTechnical InformationSTT850 SmartLine Temperature Transmitter Specification 34-TT-03-14, August 2023IntroductionPart of the SmartLine® family of products, the SmartLine STT850 is a high-performance temperature transmitter offering high accuracy and stability over a wide range of process and ambient temperatures. The SmartLine family is also fully tested and compliant with Experion ® PKS providing the highest level of compatibility assurance and integration capabilities. SmartLine easily meets the most demanding needs for temperature measurement applications.Best in Class Features:Industry-leading performanceo Digital Accuracy up to +/- 0.10 Deg C for RTD. oStability up to +/- 0.01% of URL per year for ten years. o 125 mSec update time for single input models. o250 mSec update time for dual input models.Reliable measuremento Built in Galvanic Isolation.oDifferential / Averaging / Redundant / Split Range measurements. o Dual Compartment Housing. o Sensor Break detection.o Comprehensive on-board diagnostic capabilities. o Full compliance to SIL 2/3 requirements. o Available with 15-year warranty.o Supports Namur 107 Extended Diagnostics (FF). o Supports Namur 89 Wire break.oDirect entry of Callendar-Van Dusen coefficients R 0, α, δ and β for calibrated RTD sensors (not available on DE units).Figure 1– Smartline STT850 TemperaturetransmitterLower Cost of Ownershipo Universal input o Dual sensor optiono Multiple local display capabilities o Modular constructiono External zero, span, & configuration capability o Polarity insensitive loop wiringoDigital Output Option (only available with HART)Communications/Output Options:o 4-20 mA dco Honeywell Digitally Enhanced (DE) o HART ® (version 7.0)oF OUNDATION™ Fieldbu s compliant to ITK 6.1.2All transmitters are available with the above listed communications protocols.DescriptionThe SmartLine Temperature Transmitter is designed and manufactured to deliver very high performance across varying ambient temperature. The total accuracy of the transmitter including the ambient temperature effect in harsh industrial environments, allows the STT850 to replace virtually any competitive transmitter available today.Unique Indication/Display OptionsThe STT850 modular design accommodates a basic alphanumeric LCD display or a unique advanced graphics LCD display with many unparalleled features.Standard LCD Display Featureso Modular (may be added or removed in the field).o0, 90,180, & 270-degree position adjustments.o Deg C, F, R, Kelvin, Milli volts, and Ohm measurement units.o 2 Lines 6 digits PV (9.95H x 4.20W mm), 8 Characters. o Device configuration and calibration through integral buttons or optional external buttons.o Up to 4 configurable display screens.o Configurable screen rotation timing (2 to 20 sec).o Write protect indication.o Critical fault indication.Advanced Graphics LCD Display Featureso Modular (may be added or removed in the field)o0, 90, 180, & 270-degree position adjustmentso Up to eight display screens with 3 formats are possible o Large PV (HART), PV with Bar Graph or PV with Trend Graph.o Configurable screen rotation timing (3 to 30 sec)o Provides instant visibility for diagnosticso Multiple language capability. (EN, GE, FR, IT, SP, RU, TR, CN & JP)Configuration ToolsIntegral Three Button Configuration OptionSuitable for all electrical and environmental requirements, SmartLine offers the ability to configure the transmitter and display via three externally accessible buttons when display option is selected. Zero or span capabilities are also optionally available via these buttons with or without the selection of a display option. Handheld ConfigurationSmartLine transmitters feature two-way communication and configuration capability between the operator and the transmitter. This is accomplished via Honeywell Versatilis, field-rated, next generation multiple communication configuration tool.The Honeywell Versatilis Handheld is capable of field configuring DE and HART Devices and can also be ordered for use in intrinsically safe environments.All Honeywell transmitters are designed and tested for compliance with the offered communication protocols and are designed to operate with any properly validated handheld configuration device.Personal Computer ConfigurationHoneywell’s SCT 3000 Configuration Toolkit provides an easy way to configure Digitally Enhanced (DE) instruments using a personal computer as the configuration interface.Field Device Manager (FDM) Software and FDM Express are also available for managing HART, DE & Fieldbus device configurations.DiagnosticsSmartLine transmitters all offer digitally accessible diagnostics which aid in providing advanced warning of possible failure events minimizing unplanned shutdowns, providing lower overall operational costsSystem Integrationo SmartLine communications protocols all meet the most current published standards for HART/DE/Fieldbus.o Integration with Honeywel l’s Exper ion PKS offers the following unique advantages.•Transmitter messaging•Maintenance mode indication•Tamper reporting (HART only)•FDM Plant Area Views with Health summaries•All STT850 units are Experion tested to provide the highest level of compatibility assuranceModular DesignTo help contain maintenance & inventory costs, all STT850 transmitters are modular in design supporting the user’s ability to replace temperature boards, add indicators or change electronic modules without affecting overall performance or approval body certifications. Each temperature board is uniquely characterized to provide in-tolerance performance over a wide rangeof application variations in temperature and due to the Honeywell advanced interface, electronic modules may be swapped with any electronics module without losing in-tolerance performance characteristics.Modular Featureso Replace Temperature/Terminal board/Lightning protection*o Exchange/replace electronics/comms modules*o Add or remove integral indicators*o Add or remove external configuration buttons*Field replaceable in all electrical environments (including IS) except flameproof without violating agency approvals.With no performance effects, Honeywell’s unique modula rity results in lower inventory needs and lower overall operating costs.Digital Output OptionAn optional Digital Output (open collector type) is available on HART transmitters which can be used to activate external equipment when preset Alarm Setpoints are reached. The Digital Output can be set to monitor two independent setpoints based upon the analog value of the PV or upon device status.The following Alarm Types are available:1. PV High2. PV Low3. Critical Diagnostic Active4. Redundant Input Active**5. PV Rate of Change Alarm*6. PV Deviation Alarm*Alarms can be configured as latching or non-latching. Alarm Blocking is also available which allows start-up without the alarm energizing until it first reaches the operating region. Alarm Hysteresis is configurable from 0 to 100% of PV range.The Digital Output functionality and status is also available over the HART communications link.* These Alarm Types are available as part of the Advanced Diagnostics option. Rate of Change monitors the rate at which the PV is changing, configurable as either increasing or decreasing. Deviation monitors the PV delta from a separately configurable Setpoint value.** Available only via Communications Status.See Wiring Diagrams on page 16.Performance Specifications1,321. Digital Accuracy is accuracy of the digital value accessed by the Host system and the handheld communicator.2. Total analog accuracy is the sum of digital accuracy and output D/A Accuracy.3. Output D/A Accuracy is applicable to the 4 to 20 mA Signal output.4. For TC inputs, CJ accuracy shall be added to digital accuracy to calculate the total digital accuracy.5. These input types are not available on DE units.6. Custom Callendar-van Dusen is not available for Pt25 sensors.Differential Temperature MeasurementSmartLine Temperature supports differential temperature measurements between any two types of sensors.When the loop current mode is set to "Differential" then the input range is from A to B for sensor 1 & 2 whereA = Sensor 1 Minimum - Sensor 2 MaximumB = Sensor 1 Maximum - Sensor 2 MinimumCallendar - van Dusen Algorithm (CVD)The easy-to-use Callendar - van Dusen (CVD) algorithm allows the use of calibrated Platinum RTD sensors to increase the overall system accuracy. Simply enable the algorithm and then enter the four CVD coefficients supplied with the calibrated RTD sensor into the transmitter.Digital Accuracy for differential temperature measurementIf both the inputs are similar the digital accuracy equals 1.5 times the worst-case accuracy of either sensor type.For mixed input types, the digital accuracy is the sum of sensor 1 and sensor 2 digital accuracies.EMC Confirmity (CE, Marine and SIL)The STT850 device is compliant with IEC compliance EN 61326-1: 2013, EN IEC 61326-1: 2021 (CE) ; IEC 60533: 2015 / IACS Req. 1991/Rev.8 2021 (Marine) and IEC 61326-3-1: 2017 (SIL)Performance specifications under EMC conditions (CE and Marine):HART/DE Transmitter: Worst case deviation < 0.1% of full span (for both Analog and Digital).Foundation Fieldbus Transmitter: Worst case deviation < 1°C.Performance under Rated Conditions – All Models (continued)Parameter DescriptionStray Rejection Common ModeAC (50 or 60 Hz): 120 dB (with maximum source impedance of 100 ohms) or ±1 LSB (least significant bit) whichever is greater with line voltage applied.DC: 120 dB (with maximum source impedance of 50 ohms) or a ±1 LSB whichever isgreater with 120 Vdc applied.DC (to 1 KHz): 50 dB (with maximum source of impedance of 50 ohms) or ±1 LSBwhichever is greater with 50 Vac applied.Normal ModeAC (50 or 60 Hz): 60 dB (with 100% span peak-to-peak maximum)Operating Conditions – All ModelsParameter ReferenceConditionRated Condition Operative Limits Transportation andStorage︒C ︒F ︒C ︒F ︒C ︒F ︒C ︒FAmbient Temperature1STT850 25±1 77±2 -40 to 85 -40 to 185 -40 to 85 -40 to 185 -55 to 120 -67 to 248 Humidity %RH 10 to 55 0 to 100 0 to 100 0 to 100Supply Voltage Load Resistance HART Models: 11.8 to 42.4 Vdc at terminals (IS versions limited to 30 Vdc) 0 to 1,400 ohms (as shown in Figure 2)DE Models: 13.8 to 42.4 Vdc at terminals (IS versions limited to 30 Vdc)0 to 1,300 ohms (as shown in Figure 2)FF Models: 9.0 to 32.0 Vdc at terminals1 LCD Display operating temperature -20︒C to +70︒C . Storage temperature -30︒C to 80︒C.For DE, RImax =35* (power Supply Voltage – 15)For HART, RImax = 45.6* (Power Supply Voltage – 11.8)Figure 2 - Supply voltage and loop resistance chart & calculations(not applicable for Fieldbus)Communications Protocols & DiagnosticsHART ProtocolVersion:HART 7Power SupplyVoltage: 11.8 to 42.4Vdc at terminalsLoad: Maximum 1400 ohms See figure 2Minimum Load: 0 ohms. (For handheld communications a minimum load of 250 ohms is required)IEC 61508 Safety Certified SIL 2 and SIL 3Honeywell Digitally Enhanced (DE)DE is a Honeywell proprietary protocol which provides digital communications between Honeywell DE enabled field devices and Hosts.Power SupplyVoltage: 13.8 to 42.4Vdc at terminalsLoad: Maximum 1300 ohms See Figure 2Foundation Fieldbus (FF)Power Supply RequirementsVoltage: 9.0 to 32.0 Vdc at terminalsSteady State Current: 20 mASoftware Download Current: 29 mAP = PermanentI = InstantiableThe AI function block allows the user to configure the alarms to HIGH-HIGH, HIGH, LOW, or LOW-LOW with a variety of priority levels and hysteresis settings.All available function blocks adhere to FOUNDATION Fieldbus standards. PID blocks support ideal & robust PID algorithms with full implementation of Auto-tuning. Link Active SchedulerTransmitters can perform as a backup Link Active Scheduler (LAS) and take over when the host is disconnected. Acting as a LAS, the device ensures scheduled data transfers typically used for the regular, cyclic transfer of control loop data between devices on the Fieldbus.Number of Devices/SegmentEntity IS model: 15 devices/segmentSchedule Entries45 maximum schedule entries50 maximum LinksNumber of VCR’s: 50 maxCompliance Testing: Tested according to ITK 6.1.2Physical LayerComply with IEC 61158 standardSoftware DownloadUtilizes Class-3 of the Common Software Download procedure as per FF-883 which allows any field devices to receive software upgrades from any host.STT850 Smart Temperature 9 Standard DiagnosticsSTT850 top-level diagnostics are reported as either critical or non-critical as listed below. All diagnostics are readable via the DD/DTM tools. All critical diagnostics will appear on the Standard and Advanced integral displays, and non-critical diagnostics will appear on the Advanced integral display.Critical Diagnostics- Sensor Module Fault- Communications Module Fault- Sensor Communications Fault- Input 1 Fault- Input 2 FaultNon Critical Diagnostics (for Advanced Display only)- Cal 1 Correct- Cal 2 Correct- Sensor Temperature- Sensor 1 Health- Sensor 2 Health- Input 1 Range- Input 2 Range- CJ Range- Input 1- Input 2- Input 1 TB5 (For RTD and Ohm types only)- Input 1 TB6 (for RTD and Ohm types only)- Input TB7 (Input 1 or 2, for RTD and Ohm types only)- Input 1 TB8 (for 4-Wire RTD and Ohm types only)- Input 2 TB8 (for RTD and Ohm types only)- Input 2 TB9 (for RTD and Ohm types only)- Factory Calibration- Loop Supply Voltage (not available on Fieldbus)- Communications Module Temperature- DAC Temperature Compensation (not available on Fieldbus)- Sensor Communications- Display Setup (not for Fieldbus)- Excess Delta Alert10 STT850 Smart Temperature Approval Certifications:Notes1.Operating Parameters:4-20 mA/DE/HART (Loop Terminal)Voltage= 11 to 42 Vdc Current= 4-20 mA Normal (3.8 – 23 mA Faults)FF (Loop Terminal)Voltage= 9 to 32 VDC Current = 30 mA2.Intrinsically Safe Entity Parametersa. Analog/DE/HART Entity ValuesTransmitter with Terminal Block Single (50086421-003), Dual (50086421-004) Input revision AA or DO(50086421-006) Option revision W or Laterb. Foundation Fieldbus Entity ValuesFISCO ValuesTransmitter with Terminal Block Single (50086421-009), or Dual (50086421-010) Input revision S or LaterFISCO ValuesNote: Transmitter with Terminal Block revision F or later, the revision is on the label that is on the module.Wiring DiagramsDE- Single InputWiring DiagramRTD Thermocouple,mV and OhmConnectionsDE- Dual Input WiringDiagram1Thermocouple andRTD Connections1 Not applicable forsingle input sensorHART/FF – Single Input Wiring Diagram RTD Thermocouple, mV and Ohm ConnectionsHART/FF – Dual Input Wiring DiagramRTD Thermocouple, mV and Ohm ConnectionsHART/FF Dual Input Wiring Diagram Remote C/J and Mixed Sensors ConnectionsDigital Output Connections for mA Load (HART only) Digital Output Connections for PLC Counting Input (HART only)Mounting & Dimensional DrawingsTRANSMITTER ENCLOSURE CAN BE ROTATED A TOTAL OF 90O FROM THE STANDARD MOUNTING POSITIONFigure 3 – STT850 housing- Horizontal Wall MountingFigure 4 – STT850 Angle Bracket Pipe Mount - Horizontal & VerticalFigure 5 - STT850 Pipe Mount housing - Horizontal & Vertical .STT850 Smart Temperature 21 Mounting & Dimensional DrawingsReference Dimensions:millimetersinchesFigure 6 – STT850 housing dimensions22 STT850 Smart Temperature The Model Selection Guide is subject to change and is inserted into the specification as guidance only.Model Selection GuideSTT850 Smart Temperature 2324 STT850 Smart TemperatureFor more informationTo learn more about SmartLine Temperature, visit https://Or contact your Honeywell Account ManagerProcess Solutions Honeywell1250 W Sam Houston Pkwy S Houston, TX 77042Honeywell Control Systems LtdHoneywell House, Skimped Hill Lane Bracknell, England, RG12 1EB34-TT-03-14 August 2023©2023 Honeywell International Inc.Shanghai City Centre, 100 Jungi Road Shanghai, China 20061https://Sales and ServiceFor application assistance, current specifications, pricing, or name of the nearest Authorized Distributor, contact one of the offices below.ASIA PACIFICHoneywell Process Solutions, (TAC) hfs-tac-*********************AustraliaHoneywell LimitedPhone: +(61) 7-3846 1255 FAX: +(61) 7-3840 6481 Toll Free 1300-36-39-36 Toll Free Fax: 1300-36-04-70China – PRC - Shanghai Honeywell China Inc.Phone: (86-21) 5257-4568 Fax: (86-21) 6237-2826SingaporeHoneywell Pte Ltd.Phone: +(65) 6580 3278 Fax: +(65) 6445-3033South KoreaHoneywell Korea Co Ltd Phone: +(822) 799 6114 Fax: +(822) 792 9015EMEAHoneywell Process Solutions, Phone: + 80012026455 or +44 (0)1202645583Email: (Sales)***************************or (TAC)*****************************AME RICA’SHoneywell Process Solutions, Phone: (TAC) 1-800-423-9883 or 215/641-3610(Sales) 1-800-343-0228Email: (Sales)*************************** or (TAC)*****************************Specifications are subject to change without notice.。
Series EP1000电子胶气控制器安装和操作指南纸条F-84说明书
Bulletin F-84 The Series EP1000 Electro-pneumatic Controller combinesthe highest quality instrumentation in one compact NEMA 4Xenclosure for easy, low cost installation. Simply provide a supplypressure and voltage with a standard thermocouple, RTD, DCvoltage or DC current input to this unit and a traditionalpneumatic process quickly converts to a state-of-the-artelectronic operation. The versatile microprocessor basedcontroller incorporates a high level of standard features. Typicalfunction setup items appear in the control menu only when thefunction is selected, so you don’t have to wade throughunnecessary items. Standard features include Self-Tune, fullyadjustable PID and Auto/Manual control.INSTALLATIONMounting: Loosen four (4) mounting screws on back ofenclosure and rotate mounting feet to vertical position. Mountenclosure to a flat surface in a vertical position.PNEUMATIC CONNECTIONSCAUTION: Use of a supply gas other than air can create ahazardous environment because a small amount of the gascontinuously vents to the atmosphere.Connect a clean dry air supply from 20 to 1000 psig to the portmarked “supply”. Connect the control element to the “output”port. Output is 0 to 20 psig. Both ports are 1/4˝ NPT. It isimportant that the line does not leak. This will affect controloperation.ELECTRICAL CONNECTIONSTwo (2), 1/2˝ conduit holes are provided for AC power and inputsignal connections. Run power and signal leads in separateconduit. Connect AC power and input signal to terminals shownon page 5 of controller instruction manual 949-1195. Route wirecarefully and allow proper slack in wires to allow door to open.Wires can be secured with wire tires.SPECIFICATIONSFront Panel Selectable Inputs:Thermocouple, RTD, DC voltageor DC current.Supply Pressure:Minimum: EP1000: 18 psig (1.24 bar);EP1011: 33 psig (2.28 bar);Maximum: 100 psig (6.89 bar).Output:EP1000: 3 to 15 psig (0.21 to 1.03 bar);EP1011: 6 to 30 psig (0.41 to 2.07 bar).Accuracy:±1.0% of span.Linearity:±0.75% of span.Hysteresis:±1.0% of span.Repeatability:±0.5% of span.Power Requirements: 100 to 240 VAC, 50/60 Hz.Temperature Limits: 32 to 122°F (0 to 50°C).Pressure Connections:1/4˝ female NPT.Air Consumption: 0.03 SCFM (0.5 m3/h) typical.Output Capacity:4.5 SCFM (7.6 m3/h) at 25 psig (1.72 bar) supply;12 SCFM (20 m3/h) at 100 psig (6.89 bar) supply.Enclosure: NEMA 4X.Weight: 8 lb 1 oz (3.67 kg).©Copyright 2014 Dwyer Instruments, Inc.Printed in U.S.A. 4/14FR# RP-440935-00 Rev. 4[41.28]SETTING PROGRAMThe EP1000 has been factory set for a 100 ohm platinum RTD(DIN 0.00385) input and a range of 0 to 250°F. This can beeasily changed to any other input by following the“Programming” Instructions in the controller manual. See page 3to get started. This also describes using all of the additionalfeatures.。
S4招标参数
歌德多功能手术系统
招标参数要求
▲整机原装进口
▲手术种类：
⏹歌德S4多功能手术系统可进行白内障超乳手术以及玻璃体视网膜手术
▲气源
⏹无需外接气源
歌德S4多功能手术系统有内置智能气泵，实时监控负压，不需外接气泵或管
道气源，便于手术室管理，并且不会出现手术过程中气体不足或管道气源不符
需另购气源的状况。
▲双泵系统：
⏹蠕动泵及文丘里泵：可进行白内障及玻切手术，实时热切换。
4. 超声乳化功能
▲工作模式：
⏹连续、脉冲、爆破、指数、安全堵塞模式
▲多种乳化针头
⏹三段式乳化针头
◆独有三段式乳化针头，专门为硬核设计。
▲多种超声手柄
⏹2晶片、4晶片、6晶片
▲超声频率：27-55kHz
▲负压：1-600mmgh
5.玻璃体切除功能：
▲气动玻切和磁动玻切：
⏹气动玻切：10-2500 次/分
⏹磁动玻切：10-4000 次/分
▲20G、23G、25G玻切系统
▲专利技术“双刃高速玻切头”：5000次/分
▲双光源眼内照明
⏹专利LED眼内照明：OcuLED冷光源
⏹外置氙灯：独有高照度及光毒性保护的眼内光纤系统
▲气液交换/硅油注入、取出功能
⏹气体注射压力：0-100mmHg
⏹硅油注射压力：0.5 - 6 bar
⏹主动灌注压：100mmgh
▲眼内双极电凝：
⏹功率：0 – 15W
⏹脉冲：3 Hz
6.软件功能：
⏹可根据不同医生的手术习惯进行不同用户设置
7.脚踏功能：
⏹双线性脚踏：可实现双线性、单线性等18种脚踏设置。
汉庭制造- Eclipse系列- NEMA 4, 12 单门壁挂式外壳说明书
Industrial Enclosures Wallmount Enclosures Application• Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications. • Impressive styling features like hidden hinges, attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.• A wide range of sizes and practical accessories make this product line a complete package.Standards• UL 508 T ype 3R, 4, and 12• CSA T ype 3R, 4, and 12• Complies with• NEMA T ype 3R, 4, and 12• IEC 60529, IP66Construction• Formed 14 or 16 gauge steel.• Smooth, continuously weldedseams ground smooth.• Door stiffeners are provided whererequired for increased strength andrigidity - designed to also permitadditional mounting options.• Formed lip on enclosure to excludefl owing liquids and contaminants.• Door latches feature the addedsafety of quarter turn slot requiringuse of tool for opening.• Doors may be easily removedfor modifi cations and areinterchangeable.• Seamless poured-in place gasket.• Collar studs provided for mountinginner panel.• Includes hardware kit with panelmounting nuts and sealing washersfor wall mounting holes.• Bonding stud provided on doorand grounding stud installed inenclosure• Hinges are constructed from 304stainless steel.• Hinge pins are stainless steel.• Quarter turn latch and multi-pointhandle (key lockable) are zincdiecast with black epoxy fi nish.• Door alignment guide provided on36" wide enclosures.Finish• Cover and enclosure arephosphatized and fi nished with arecoatable powder inside and outwith choice of ANSI 61 smooth Gray(GY) or RAL7035 textured light gray(LG).Accessories• Air conditioners...see page349-367• Blowers...see page392• Breather kits...see page400-401• DIN rails...see page30• DIN rail mounting kit...see page30• Door stop kit...see page453• Drip shield kit...see page451• Filter fans...see page371-384• Gland Plates...see page446• Heaters...see page393-396• Handles...see page31• Inner panel...see page29• Quarter turn inserts and keys...see page31• Literature pocket...see page456• Mounting foot kit...see page31• Swing frame...see page30• Swing panel...see page29• Rear Hole Plugs...see page32• Replacement hinge pins...see page29• Replacement quarter turnassemblies...see page31• Thermostats...see page397• T ouch up paint...see page455• UL/CSA approved hardware kit...see page433• Padlock Adapter (EP A)...see page 434 Single Door withquarter turnsSingle Door with multi-pointlatching handle and quarter turnsSingle Door with latching handleIndustrial EnclosuresWallmount EnclosuresRefer to part number and dimension chart on next pageIndustrial Enclosures Wallmount EnclosuresIndustrial EnclosuresWallmount EnclosuresEN4SD241610GY EN4SD241610LG 241610161Qtr. T urn EP241622.214.221830EN4SD242010GY EN4SD242010LG 242010161Qtr. T urn EP242022.218.221836EN4SD242410GY EN4SD242410LG 242410142Qtr. Turn EP242422.222.221845EN4SD243010GY EN4SD243010LG 243010142Qtr. Turn EP243022.228.221853EN4SD302010GY EN4SD302010LG 302010142Qtr. Turn EP302028.218.231247EN4SD302410GY EN4SD302410LG 302410142Qtr. Turn EP302428.222.231253EN4SD303010GY EN4SD303010LG 303010142Qtr. Turn EP303028.228.231275EN4SD362410GY EN4SD362410LG 362410142Qtr. Turn EP362434.222.231570EN4SD363010GY EN4SD363010LG 363010142Qtr. T urn EP363034.228.231584EN4SD363610GY EN4SD363610LG 363610142Qtr. Turn EP363634.234.2315100EN4SD423010GY EN4SD423010LG 4230101413-point EP423040.228.2412107EN4SD423610GY EN4SD423610LG 4236101413-point EP423640.234.2412117EN4SD482410GY EN4SD482410LG 4824101413-point EP482446.222.241495EN4SD483010GY EN4SD483010LG 4830101413-point EP483046.228.2414120EN4SD483610GY EN4SD483610LG 4836101413-point EP483646.234.2414125EN4SD603610GY EN4SD603610LG 6036101413-point EP603658.234.2418150EN4SD201612GY EN4SD201612LG 201612161Qtr Turn EP201618.214.221432EN4SD202012GY EN4SD202012LG 202012161Qtr Turn EP202018.218.221434EN4SD242012GY EN4SD242012LG 242012161Qtr Turn EP242022.218.221838EN4SD242412GY EN4SD242412LG 242412142Qtr Turn EP242422.222.221847EN4SD302412GY EN4SD302412LG 302412142Qtr Turn EP302428.222.231257EN4SD303012GY EN4SD303012LG 303012142Qtr T urn EP303028.228.231280EN4SD362412GY EN4SD362412LG 362412142Qtr T urn EP362434.222.231562EN4SD363012GY EN4SD363012LG 363012142Qtr Turn EP363034.228.231591EN4SD363612GY EN4SD363612LG 363612142Qtr Turn EP363634.234.2315104EN4SD423012GY EN4SD423012LG 4230121413-point EP423040.228.2412111EN4SD423612GY EN4SD423612LG 4236121413-point EP423640.234.2412121EN4SD482412GY EN4SD482412LG 4824121413-point EP482446.222.241498EN4SD483612GY EN4SD483612LG 4836121413-point EP483646.234.2414148EN4SD603612GY EN4SD603612LG 6036121413-point EP603658.234.2418165EN4SD723012GY EN4SD723012LG 723012142Qtr Turn, 5-point EP723070.228.2516.5190EN4SD723612GY EN4SD723612LG 723612142Qtr T urn, 5-point EP723670.234.2516.5195EN4SD242016GY EN4SD242016LG 242016161Qtr Turn EP242022.218.221852EN4SD242416GY EN4SD242416LG 242416142Qtr Turn EP242422.222.221866EN4SD302416GY EN4SD302416LG 302416142Qtr Turn EP302428.222.231285EN4SD363016GY EN4SD363016LG 363016142Qtr T urn EP363034.228.2315102EN4SD423616GY EN4SD423616LG 4236161413-point EP423640.234.2412140EN4SD483616GY EN4SD483616LG 4836161413-point EP483646.234.2414148EN4SD603616GYEN4SD603616LG6036161413-point EP603658.234.2418200EN4SD723016GY EN4SD723016LG 723016142Qtr Turn, 5-point EP723070.228.2516.5215EN4SD723616GY EN4SD723616LG 723616142Qtr Turn, 5-point EP723670.234.2516.5217EN4SD242420GY EN4SD242420LG 242420142Qtr Turn EP242422.222.221870EN4SD302420GY EN4SD302420LG 302420142Qtr Turn EP302428.222.231282EN4SD363020GY EN4SD363020LG 363020142Qtr T urn EP363034.228.2315117EN4SD483620GY EN4SD483620LG 4836201413-point EP483646.234.2414165EN4SD603620GYEN4SD603620LG6036201413-point EP603658.234.2418210EN4SD723020GY EN4SD723020LG 723020142Qtr T urn, 5-point EP723070.228.2516.5217EN4SD302424GY EN4SD302424LG 302424142Qtr T urn EP302428.222.2312115EN4SD723024GY EN4SD723024LG723024142Qtr Turn, 5-pointEP723070.228.2516.5220。
Festo 联轴器操作手册说明书
原版操作手册的译本1关于本文件适用文件产品所有相关文档è /pk。
–电机操作指南–轴操作指南2安全2.1安全注意事项–仅允许将产品安装在处于安全状态的部件上。
–清洁轴/空心轴。
联轴器只有夹紧在干燥且无润滑脂的轴表面上时才不会打滑。
–清洁 [1] 联轴器轮毂：–去除 [G] 外径夹紧销上的油脂。
为膨胀心轴椎体 [H] 润滑。
–去除夹紧孔的油脂。
–遵守 [1] 联轴器轮毂校准è 4.3.4 联轴器校准。
–为以下组合提供支撑è 4.4.1 轴-电机组合的支撑：–凸出的电机附件和重电机附件–强烈振动和振动/冲击负载–在每次松开或旋转电机后，进行轴的参照点运行。
–选择所需的紧固件。
该组件包括最大要求的紧固件。
–遵守拧紧力矩。
如果没有特别说明，则公差为 ± 20 %。
è 6 技术数据。
2.2按规定使用2.2.1使用轴与电机连接，电机与驱动轴呈轴向布置。
2.2.2许用的轴和电机过载将导致功能故障和财产损失。
电机的输出端变量不得超过所使用部件的许用数值。
许用数值è /catalogue。
•对电机输出端变量予以相应限制。
•由接口代码推导出轴和电机。
示例：EAMM-A-L48-70AL48：轴接口70A：电机接口轴接口轴1)L27EGC-50-...-TBL48EGC-80-...-TBN80ELGA-TB-...-1201) 齿形带式电缸 EGC/ELGATab. 1电机接口电机1)42A EMMS-ST-4255A EMMS-AS-55，外厂电机84AA外厂电机100A EMME/EMMS/EMMT-AS-1001) 伺服电机 EMM...-AS，步进电机 EMM...-STTab. 2用户应自行决定将外厂电机与合适的机械接口进行组合。
有关适合的外厂电机类型，请联系 Festo 公司在您所在地的联系人或访问è/sp。
2.3专业人员的资质仅允许由有资质的专业人员安装。
SINUMERIK SINUMERIK 840D sl 前置操作面板：OP 015A 设备手册 06
1.4 1.4.1 1.4.1.1 1.4.1.2 1.4.1.3 1.4.1.4 1.4.2 1.4.2.1 1.4.2.2 1.4.2.3 1.4.2.4 1.4.2.5 1.4.2.6 1.4.2.7 1.4.2.8 1.4.2.9 1.4.2.10
联网................................................................................................................................40 系统设置.........................................................................................................................40 采用 SINUMERIK solution line 时的设置........................................................................40 设备网络中的系统启动....................................................................................................42 精简型客户端单元（TCU）............................................................................................43 出厂预设置......................................................................................................................44 调试 TCU........................................................................................................................46 操作 TCU 主菜单............................................................................................................46 操作其他 TCU 菜单.........................................................................................................49 在设备网络中注册 TCU..................................................................................................61 校准触摸面板..................................................................................................................64 连接 SIMATIC Thin Client 触摸面板...............................................................................66 配置 SIMATIC Thin Client 触摸面板...............................................................................67 文件“config.ini”中的设置...............................................................................................69 文件“tcu.ini”中的设置....................................................................................................72 采用 TCU 时的置换机制.................................................................................................79 通过 PLC 禁止 TCU 之间的切换.....................................................................................81
14Q中文版
#Label 1
2
3
4
5 6 7指定量检具，遵守监控时间间隔。
采用“对检测者进行检查” (Check the
Checker) 的原则，并能够证明“检测者”的
能力。
将维护保养标准落实到每个工位，并严格遵守。
确保所有给定的过程参数均得到遵循。
Q14 Matrix
Details
在工厂中就客户投诉进行沟通，并在相关工位或区
域将这些投诉可视化。
迅速和系统化地运用问题解决方法处理这些投诉。
及时同IPN(全球生产网络) 工厂沟通相关情况。
当价值流（采购、制造、交付）中出现质量偏差或超出预限值的情况时，员工必须停止相关过程，并上报。
必须遵从安全、健康、生产和检验规范。
建立并遵守5标准。
8 9 10
11 12 13应清楚地规定对报废件和返工件的处理流程。
坠地或落入机器设备内的零件，以及无法判别的零件必须作报废处理。
只允许提供正确的零件以供取用和安装。
应确定所有刀具的使用寿命；
必须能够识别当前状态；
更换后必须进行质量评估。
针对所有机器和装置，应清楚地规定其
中断运行后重新启用的流程。
按照标准对零件和容器进行标识。
14对尾料的处理应进行明确地规定。
”的区
这些投诉。
关情况。
E14 Guideline (R3) - questions and answers说明书
30 Churchill Place ● Canary Wharf ● London E14 5EU ● United Kingdom Telephone +44 (0)20 3660 6000 Facsimile +44 (0)20 3660 555525 January 2016EMA/CHMP/ICH/310133/2008Committee for Human Medicinal ProductsICH guideline E14: the clinical evaluation of QT/QTc interval prolongation and proarrhythmic potential for non-antiarrhythmic drugs (R3) - questions and answersStep 5E14 Q&As (R3) Document HistoryICH guideline E14: the clinical evaluation of QT/QTc interval prolongation and proarrhythmic potential for non-antiarrhythmic drugs (R3) - questions and answersICH guideline E14 (R3) - questions and answersTable of contents1E lectrocardiograms methodology (4)2G ender (9)3P ositive control (10)4S tudy design (12)5U se of concentration response modeling of QTc data (13)6S pecial cases (16)7E lectrocardiograms monitoring in late stage clinical trials (17)ICH guideline E14 (R3) - questions and answers1Electrocardiograms methodologyICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 4/20ICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 5/20ICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 6/20ICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 7/20ICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 8/202GenderICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 9/203Positive controlICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 10/20ICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 11/204Study designICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 12/205Use of concentration response modeling of QTc dataICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 13/20ICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 14/20ICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 15/20ICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 16/20 6 Special cases6.1 March2014 The ICH E14 Guideline states that in certain cases a conventional thoroughQT study might not be feasible. In suchcases what other methods should beused for evaluation of QT/QTc andproarrhythmic potential? In certain cases the conventional “thorough QT/QTc” study design (a crossover study in healthy volunteers with short-term administration of the usual maximum dose and one higher dose with placebo and positive control) might need to be modified for a drug or active metabolite with a long half-life or delayed QT effect, or because of safety, tolerability or practical issues that preclude use in healthy subjects. In most cases alternative designs can be used that may affect power considerations, but do notcompromise study interpretation. For example, multiple doses can be studied in aparallel design trial or can use patients with the disease for which the drug is intendedrather than healthy volunteers.Where a placebo-controlled comparison using appropriate doses is not possible,alternative study d esigns should incorporate as many of the usual “thorough QT/QTc”design features as possible, and the quality and extent of the pre-clinical evaluation (ICHS7B Guideline) is particularly critical. Other useful supplementary data might includeintensive ECG data acquisition in early phase single or multiple ascending dose studies,utilisation of concentration-response analysis, and evaluation of exposures that aregreater than are anticipated with the intended marketed dose.A single dose of a positive control is generally sufficient, even if it precedes theinvestigational drug treatment. In the absence of a positive control, there is reluctanceto draw conclusions of lack of an effect; however, if the upper bound of the two-sided90% confidence interval around the estimated maximal effect on QTc is less than 10 ms,it is unlikely to have an actual mean effect as large as 20 ms.When a thorough QTc study of usual or modified design is not feasible, the intensity oflate phase ECG monitoring will be dependent upon the quality and extent of the non-clinical and clinical evaluation. In situations where it is not possible to study higherexposures than are anticipated with the intended marketed dose, more intensive ECGmonitoring might be necessary during Phase 3 trials. When the non-clinical and early7Electrocardiograms monitoring in late stage clinical trialsICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 17/20ICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 18/20ICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 19/20ICH guideline E14 (R3) - questions and answersEMA/CHMP/ICH/310133/2008 Page 20/20。
岛津GC-2014硬件基本操作
岛津国际贸易(上海)有限公司
第 4 页 共 24 页
GC-2014 硬件基本操作
进样口温度设定
按［INJ］可进入进样口温度设定
当前所使用的文件 当前所有更改都记 录在该文件中
进样口温度设定
切换到下一个进样口
当多次按［INJ］键也可切 换进样口设定页
第 5 页 共 24 页
按下[FUNC]|键出现以下画面，选择 6 GC Configuration
第 11 页 共 24 页
岛津国际贸易(上海)有限公司
GC Configuration 第一项时间设定
GC-2014 硬件基本操作
当前时间
GC Configuration 第二项最高温度设定
柱温的最高温度 由柱决定
各部件的最高温 度设定
第 8 页 共 24 页
GC-2014 硬件基本操作
仪器工作状态监视
按［MONIT］进入 GC 监视画面
检测器状态
FID 或FPD 检测器点燃状态可在监控屏幕中确认
例如 SFID
DFID
检测器调零 从[Monit]键主屏幕按[Zero Adj] (PF 菜单)可使当前检测器信号归零
毛细
第 柱系
9
页
第 18 页 共 24 页
GC-2014 硬件基本操作
常见问题............................................23
岛津国际贸易(上海)有限公司
GC-2014 硬件基本操作
仪器操作
仪器电源打开后经过自检出现以下画面
方法一、可按左右键 选择方法文件并按 ［Enter］键确认
方法二、按［SET］键 出现以下画面输入常用参数
2014 LX商品说明书
1 LX shown in Starfire Pearl // Options shown.3LX shown in Silver Lining Metallic // Options shown.2DO EVERYTHING YOU CAN IMAGINE.AND A FEW MORE THINGS THAT YOU CAN’T. THE UNPARALLELED 2014 LX.4LX shown in Nebula Gray Pearl // Options shown.56LX shown in Parchment leather with Mahogany wood trim // Options shown.7EXCEPTIONALL8LX shown in Silver Lining Metallic // Options shown.910LX shown in Parchment leather with Mahogany wood trim // Options shown.11LX shown in Silver Lining Metallic // Options shown.13The available Wide-view Front Monitor 16 captures a broad view of the forward and peripheral surroundings, which then displays on the Navigation15403 lb-ftt orque @ 3,600 rpm 1290% of maximum torqueavailable @ 2,200 rpm7,000-poundt owing capacity 13,14G. Available Wide-view Front and Side Monitor system 4 H. Blackleather interior with Mahogany trim I. Available Rear-SeatEntertainment System (RSES ) J. Electroluminescent instrumentation with multi-information display K. Steering-wheel controls L. USB connectivity1716 A. Transfer case, Crawl Control,11 vehicle height andsuspension controls B. Parchment leather interior with Mahogany trim C. Power open/close rear door D. Subscription-free Lexus Enform App Suite 7 E. Versatile rear seating F. Three-row, eight-passenger seating20Four-zone automatic climate control with smog sensor and automatic circulation mode // Lexus Memory System // Power tilt-and-slide moonroof // Power rear door // Leather-trimmed interior // Mahogany interior trim // 10-airbag system 20 // Navigation System 17 // Lexus Enform 7 one-year trial subscription // Lexus Enform App Suite 7 // Full-timefour-wheel drive // Adaptive Variable Suspension (AVS ) with Active Height Control (X-AHC ) // Crawl Control 11 with T urn Assist // 14-way driver’s seat(including dual-function lumbar and cushion extender ) // Power-sliding,60/40-split middle-row seatwith 40/20/40-split seatback // Auto on/off High-Intensity Discharge (HID ) headlamps with Dual-swivel Adaptive Front Lighting System (AFS )21 // Wood- and leather-trimmed steering wheel and shift knob // Smart Stop technology 22 // T railer Sway Control 1820-in split-five-spoke alloy wheels 27 STANDARDKEYSTANDARD FEATURESPACKAGES WHEELS For complete list, visit /LX/featuresINDIVIDUAL OPTIONSMark Levinson 19-speaker 450-watt @ less than0.1% THD, 20–20,000 Hz 23 Reference Surround Sound Audio System 1 // Heated and ventilated front seats and heated second-row seats // Dual-screen DVD Rear-Seat Entertainment System (RSES )9 // Wide-view Front and Side Monitor system 4 with Intuitive Parking Assist // Pre-Collision System (PCS )15 and Dynamic Radar Cruise Control 24For complete list, visit /LX/options For complete list, visit /LX/packagesFor complete list of Genuine Lexus Accessories, visit /LX/accessoriesLUXURY PACKAGE WITH PRE-COLLISION SYSTEM AND DYNAMIC RADAR CRUISE CONTROLSemi-aniline leather-trimmed interior with contrast stitching // Heated steering wheel // Heated and ventilated front seats // Heated second-row seats // Mahogany-trimmed door switchplates and rear-center armrest cover // Front-seat cool box // SmartAccess 25,26 cardkeyLX shown in Silver Lining Metallic // Options shown.21HEIGHT 75.6 INKEY SPECS5.7L V87.5S12,28LX 570ENGINEPERFORMANCE12 / 17 / 1429FUEL ECONOMY, EPA-ESTIMATED RATINGS (CITY / HIGHWAY / COMBINED ) 4W D6-SPEEDSTANDARDDRIVETRAINSEQUENTIAL-SHIFT ELECTRONICALLY CONTROLLED TRANSMISSIONEST MPG0–60 INFor complete specs, visit /LX/specsWIDTH 77.6 INOVERALL LENGTH 197.0 INWHEELBASE 112.2 INHORSEPOWER383HP12TORQUE GROUND CLEARANCECARGO CAPACITY (MAX )TOWING CAPACITY403LB-FT 128.9IN83.1CU FT 57,000LB 13,1423EXTERIORSILVER LINING METALLIC STARFIRE PEARL NEBULA GRAY PEARLSATIN CASHMERE METALLICCLARET MICABLACK ONYX22INTERIOR BLACKLEATHERPARCHMENTLEATHERTRIMMAHOGANYFPOFSC Logo—, NOVEMBER 14, 2012“THE BIGGEST, MOST CAPABLE AND MOST OPULENT SPORT-UTILITY ON THE BLOCK.”WARRANTY Four-year/50,000-mile Lexus Limited Warranty. Six-year/70,000-mile Powertrain Warranty. Six-year/unlimited-mileage Corrosion Perforation Warranty. All warranties with zero deductible. See the LX Warranty and Services Guide at your Lexus dealer for details. DISCLOSURES 1. Mark Levinson ® is a registered trademark of Harman International Industries, Inc. 2. The LX 570 is designed to meet most off-road driving requirements. Abusive use may result in bodily harm or damage. Lexus encourages responsible operation to help protect you, your vehicle and the environment. Seatbelts should be worn at all times. Please do not allow passengers to ride in the cargo area. Tow hitch receivers/ball mount kits are not intended to provide crash protection. 3. The backup camera does not provide a comprehensive view of the rear area of the vehicle. Y ou should also look around outside your vehicle and use your mirrors to confirm rearward clearance. Cold weather may limit effectiveness and view may become cloudy. 4. The Wide-view Front and Side Monitor does not provide a comprehensive view of the front and side areas of the vehicle. Y ou should also look around outside your vehicle and use your mirrors to confirm clearance. Cold weather will limit effectiveness and view may become cloudy. 5. The Wide-view Side Monitor system does not provide a comprehensive view of the front passenger-side area of the vehicle. Y ou should also look around outside your vehicle and use your mirrors to confirm clearance. Cold weather will limit effectiveness and view may become cloudy. 6. Cargo and load capacity limited by weight and distribution. 7. Always drive safely, obey traffic laws & focus on the road while driving. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large amounts of data, you are responsible for all charges. Apps/services are subject to change. Apps identified by ™ or ® are trademarks or registered trademarks of their respective companies. For enrollment, cost and more details, see /enform. 8. Contact with the response center may not be available in all areas. Service Agreements required. A variety of subscription terms available; charges will vary. See for details. 9. A single-disc DVD player is standard. A separate DVD player or game system utilizing the center console’s video/audio inputs is required in order to use the split-screen function of the dual-screen system. 10. Headphones are for passenger use only. Do not use while operating vehicle. 11. Crawl Control is designed for driving on difficult terrain at low speeds. It assists the driver by controlling acceleration and braking, allowing the driver to focus on steering. The LX 570 is designed to meet off-road driving requirements, but off-roading is inherently dangerous. Always wear seatbelts. 12. Ratings achieved using the required premium unleaded gasoline with an octane rating of 91 or higher. If premium fuel is not used, performance will decrease. 13. Before towing, confirm your vehicle and trailer are compatible, hooked up properly and you have any necessary additional equipment. If gross trailer weight is above 5,000 lb (2,268 kg ), it is necessary to use a weight-distributing hitch with sufficient capacity. Do not exceed any Weight Ratings and follow all instructions and cautions from your trailer-hitch manufacturer and vehicle Owner’s Manual . The maximum amount you can tow depends on the total weight of any cargo, occupants and available equipment. 14. Please consult your Lexus dealer or Owner’s Manual for towing and load specifications. 15. The Pre-Collision System is designed to help reduce the crash speed and damage in certain frontal collisions only. It is not a collision-avoidance system and is not a substitute for safe and attentive driving. System effectiveness depends on many factors, such as speed, driver input and road conditions. See Owner’s Manual for further information. 16. The Wide-view Front Monitor does not provide a comprehensive view of the front area of the vehicle. Y ou should also look around outside your vehicle and use your mirrors to confirm clearance. Cold weather will limit effectiveness and view may become cloudy. 17. Availability and accuracy of the information provided by the Navigation System or any SiriusXM™ and/or HD Radio™ services mentioned (if installed ) are dependent upon many factors. Use common sense when relying on information provided. Services not available in every city or roadway. Periodic Enform app updates do not include Navigation updates. Navigation updates are available at an additional cost from your local dealer. See Navigation Owner’s Manual or contact SiriusXM for details. 18. Trailer Sway Control (TSC ) is an electronic system designed to help the driver maintain vehicle control under adverse conditions. It is not a substitute for safe driving practices. Factors including speed, road conditions and driver steering input can all affect whether TSC will be effective in preventing a loss of control. See Owner’s Manual for details. 19. TORSEN ® is a registered trademark of Zexel Torsen, Inc. 20. All the airbag (AB ) systems are Supplemental Restraint Systems. All ABs are designed to inflate only under certain conditions and in certain types of severe collisions: frontal and knee ABs typically inflate in frontal collisions; side and side curtain ABs in side collisions; Roll-Sensing Curtain ABs at a severe tilt degree, roll or lateral G-force. In all other accidents, the ABs will not inflate. To decrease the risk of injury from an inflating AB, always wear seatbelts, sit upright in the middle of the seat as far back as possible and do not lean against the door. Do not put objects in front of an AB or around the seatback. Do not use a rearward-facing child seat in any front passenger seat. The force of an inflating AB may cause serious injury or death. See Owner’s Manual for further information/warnings. 21. The Adaptive Front Lighting System helps improve vision at night. Situations such as dirty windshield, rapidly changing light conditions or hilly terrain will limit effectiveness, requiring the driver to manually turn off. See Owner’s Manual for details. 22. Smart Stop Technology operates only in the event of certain simultaneous brake and accelerator pedal applications. When engaged, the system will reduce power to help the brakes bring the vehicle to a stop. Factors including speed, road conditions and driver input can all impact stopping distance. Smart Stop T echnology is not a substitute for safe and attentive driving and does not guarantee instant stopping. See Owner’s Manual for further details. 23. Continuous average power, all channels driven, at less than 0.1% THD; 20–20,000 Hz. 24. Dynamic Radar Cruise Control is designed to assist the driver and is not a substitute for safe and attentive driving practices. See Owner’s Manual for details. 25. The SmartAccess system may interfere with some pacemakers or cardiac defibrillators. If you have one of these medical devices, please talk to your doctor to see if you should deactivate this system. 26. The engine immobilizer is a state-of-the-art anti-theft system. When you insert your key into the ignition switch or bring a SmartAccess fob into the vehicle, the key transmits an electronic code to the vehicle. The engine will only start if the code in the transponder chip inside the key/fob matches the code in the vehicle’s immobilizer. Because the transponder chip is embedded in the key/fob, it can be costly to replace. If you lose a key or fob, your Lexus dealer can help. Alternatively, you can find a qualified independent locksmith to perform high-security key services by consulting your local Y ellow Pages or by contacting . 27. 20-in performance tires are expected to experience greater tire wear than conventional tires. Tire life may be substantially less than 20,000 miles, depending upon driving conditions. 28. Performance figures are for comparison only and were obtained with prototype vehicles by professional drivers using special safety equipment and procedures. Do not attempt. 29. 2014 EPA-estimated ratings. Actual mileage will vary.Lexus strives to build vehicles to match customer interest, and thus they typically are built with popular options and option packages. Not all options/packages are available separately, and some may not be available in all regions of the country. See for information about options/packages commonly available in your area. If you would prefer a vehicle without any or with different options, contact your dealer to check for current availability or the possibility of placing a special order. Specifications, features, equipment, technical data, performance figures, options, and color and trim are based upon information available at time of printing, are subject to change without notice, and are for mainland U.S.A. vehicles only. Some vehicles shown with available equipment. See your Lexus dealer for details. Lexus reminds you to wear seatbelts, secure children in rear seat, obey all traffic laws and drive responsibly. For more information, call 800-USA-LEXUS (872-5398) or visit . To learn more about your financing options, contact your Lexus dealer or call Lexus Financial Services at 800-874-7050. P4-021 (XX/13) 00217-LXBRO -14 Printed in U.S.A. (XXXM ) ©2013 Lexus.。
Lenovo成品检验标准
Asia Vital Components (Dongguan) Co., Ltd.
Lenovo AIO FQC 檢驗規範
显示屏表面不应有腐蚀及碎裂，涂覆层应均匀，无凝结、脱落、龟裂及磨损现象。
不能有凹痕、气泡、污点、异物、有感刮伤、无感刮伤。
显示屏各机构部分，如背板、PCB表面、金属边框等不得变形,不得与未来需组装的AIO电脑主机
有感3條，無感4條，兩者相距50mm以上
之無感刮痕(傷)或磨損有感2條，無感3條,兩者相距50mm以上
不允收
異色雜質三處
同色雜質≦6個,且任意两個间距>50mm
凹凸痕、批峰、油污、頂白、焦痕、短射、髒污、梳漆、凝漆、溢漆、氣泡、魚眼、橘皮、掉漆不允許Limited Sample判定
＜圖一＞ODD與四周間隙(ODD四周<=1.0mm)，如下圖
＜圖二＞。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
16 KB 5.2% 5.7% 64 KB 1.9% 2.0% 256 KB 1.15% 1.17%
3/4/10
CS162 ©UCB Spring 2010
Lec 14.7
3/4/10
CS162 ©UCB Spring 2010
Lec 14.8
Page 2
What happens on a write? • Write through: The information is written to both the block in the cache and to the block in the lower-level memory • Write back: The information is written only to the block in the cache.
10s-100s Ks-Ms
100s Ms
10,000,000s 10,000,000,000s (10s ms) (10s sec) Gs Ts Lec 14.2
Size (bytes): 100s 3/4/10
CS162 ©UCB Spring 2010
Example • Data in memory, no cache:
32-Block Address Space:
31
Block no.
1111111111222222222233 01234567890123456789012345678901
Cache Data Cache Block 0
Valid
Direct mapped:
block 12 (01100) can go only into block 4 (12 mod 8)
01100
tag 14.6
Review: Which block should be replaced on a miss? • Easy for Direct Mapped: Only one possibility • Set Associative or Fully Associative:
Processor
Second Level Cache (SRAM)
Main Memory (DRAM)
• Conflict (collision):
– Multiple memory locations mapped to same cache location – Solutions: increase cache size, or increase associativity
Block no. 01234567 Block no.
Set associative:
block 12 can go anywhere in set 0 (12 mod 4)
01234567
Fully associative:
block 12 can go anywhere
Block no. 01234567
• Two others:
– Coherence (Invalidation): other process (e.g., I/O) updates memory – Policy: Due to non-optimal replacement policy
3/4/10 CS162 ©UCB Spring 2010 Lec 14.4
:
:
:
:
:
:
Compare
Sel1 1
Mux
0 Sel0
Compare
OR
3/4/10
01 100
CS162 ©UCB Spring 2010
Hit
Cache Block
Lec 14.5
3/4/10
tag
block
Set Set Set Set 011 00 0 1 2 3 CS162 ©UCB Spring 2010
Review: Memory Hierarchy of a Modern Computer System
CS162 Operating Systems and Systems Programming Lecture 14 Caching and Demand Paging
March 4, 2010 Ion Stoica /~cs162
Size
2-way 4-way LRU Random LRU Random
4.7% 5.3% 1.5% 1.7% 1.13% 1.13%
8-way LRU Random
4.4%5.0% 1.4%1.5% 1.12%1.12% Note: Some slides and/or pictures in the following are adapted from slides ©2005 Silberschatz, Galvin, and Gagne. Gagne Many slides generated from my lecture notes by Kubiatowicz.
Processor Main Memory (DRAM)
Review: A Summary on Sources of Cache Misses • Compulsory (cold start): first reference to a block
– “Cold” fact of life: not a whole lot you can do about it – Note: When running “billions” of instruction, Compulsory Misses are insignificant
CS162 ©UCB Spring 2010 Lec 14.9
• Question is one of page locality: does it exist?
Data Read or Write (untranslated)
• Can we have a TLB hierarchy?
3/4/10
– N direct mapped caches operates in parallel – Cache Index selects a “set” from the cache – Two tags in the set are compared to input in parallel – Data is selected based on the tag result
• Take advantage of the principle of locality to:
– Present as much memory as in the cheapest technology – Provide access at speed offered by the fastest technology
Processor Control Second Level Cache (SRAM) Main Memory (DRAM) Secondary Storage (Disk)
Tertiary Storage (Tape)
On-Chip Cache
Registers
1s
Datapath
Speed (ns):
Average Access time (Hit Rate x HitTime) • HitRate + MissRate = 1 • HitRate = 90% Average • HitRate = 99% Average
3/4/10
10ns = 100ns + (Miss Rate x MissTime)
– Modified cache block is written to main memory only when it is replaced – Question is block clean or dirty? – WT: – WB:
Caching Applied to Address Translation
Access Time = 19ns Access Time = 10.9ns
Lec 14.3
CS162 ©UCB Spring 2010
Page 1
Review: Set Associative Cache • N-way set associative: N entries per Cache Index • Example: Two-way set associative cache
Access time = 100ns
100ns
• Capacity:
– Cache cannot contain all blocks access by the program – Solution: increase cache size
• Data in memory, 10ns cache:
– Instruction accesses spend a lot of time on the same page (since accesses sequential) – Stack accesses have definite locality of reference – Data accesses have less page locality, but still some… – Sure: multiple levels at different sizes/speeds
– Random – LRU (Least Recently Used)
Goals for Today • • • • • Finish discussion of Caching/TLBs Concept of Paging to Disk Page Faults and TLB Faults Precise Interrupts Page Replacement Policies