户外P10.66三合一规格书

合集下载

16-100A 16-100电流重型，600V三极配置说明书

Technical information
OT16E3C
UL General Purpose Amp Rating IEC AC21 amp rating Approvals
Maximum Operating Voltage Technical Ratings - UL
Maximum Horsepower Ratings Three Phase
Defeatable
Yes Yes
Padlockable
Yes Yes
Weight (lbs)
0.29 0.29
Catalog Number
OHB65J5E011 OHB65L5E011
OT16, 25, 32E3C & E4C – Transfer switches
1.38 35
0.18 DIA. 4.5
On-Load Switching
Electrical Characteristics of the OT transfer switch line allows on-load switching between two power supplies, adding value to and enhancing the performance of the transfer switch and its applications.
Clear Position Indication
ABB Manual Transfer Switches are equipped with three definite positions (I-O-II). Isolation between two power supplies is guaranteed by the contact mechanisms, designed as a positive opening construction with mechanically operated contacts.

戴尔EqualLogic PS6100X, PS6110X产品安全、EMC和环境数据表说明书

MARKETING NAME*: Dell EqualLogic PS6100X, PS6110X Dell Inc. REGULATORY MODEL: E04J REGULATORY TYPE: E04J001EFFECTIVE DATE: August 18, 2011TABLE OF CONTENTS FOR PRODUCT SAFETY, EMC & ENVIRONMENTAL DATASHEETRegulatoryI. Product SafetyII. Electromagnetic CompatibilityIII. Ergonomics, Acoustics, and Hygienics IV. Power Cords and User Documentation V. Datasheet Responsible Party Name and AddressVI. Trade Import/Export Compliance Data Environmental VII. System Dimension and WeightVIII. Declarations and CertificationsIX. Performance DataX. Product Materials InformationXI. PackagingXII. BatteriesXIII. Design for EnvironmentXIV. Recycling/End-of-Life Service Information XV. Dell Corporate Environmental InformationI. PRODUCT SAFETY1The product has been certified and bears the Mark, as applicable, of the Product Safety authorities as indicated below.Country/Region Authority or MarkArgentina IRAMBelarus BELLISCanada SCCCroatia KONCAREuropean Union CEGermany TUVSUDIECEE IECEE CBIsrael SIIKazakhstan OTAN–CKTKenya KEBSKuwait KUCASMexico NYCE (NOM)Moldova INSMNigeria SONCAPNorway NEMKORussia GOSTSaudi Arabia KSA ICCPSerbia KVALITETSouth Africa NRCSTaiwan BSMIUkraine UKRTESTUnited States NRTLUzbekistan STZ* Notice: This product has been assigned a unique regulatory model and regulatory type that is imprinted on the product shipping invoice and product labeling to provide traceability to the regulatory approvals noted on this datasheet. This datasheet applies to any product that utilizes the assigned regulatory model and type including marketing names other than those listed on this datasheet. Requests for specific information on product regulatory approvals should reference the assigned product regulatory model and type.1 The above-listed Product Safety certifications may vary depending upon the location of the factory and specific product configuration. Certification marks may not be applied on products for countries outside the purchaser’s country.II. ELECTROMAGNETIC COMPATIBILITY2The product has been certified and bears the Mark, as applicable, of the EMC authorities as indicated below.Country/Region Authority or Mark Class Australia / New Zealand ACMA (C-Tick)Class ABelarus BELLIS Class ABosnia & Herzegovina, Montenegro, Serbia KVALITET Class ACanada ICES Class ACroatia KONCAR Class AEuropean Union CE Class AIsrael SII Class AJapan VCCI Class A–CKT Class AKazakhstan OTANMoldova INSM Class ANorway NEMKO Class ARussia GOST Class ASouth Africa SABS Class ASouth Korea KC Class ATaiwan BSMI Class AUkraine UKRTEST Class AUnited States FCC Class AUzbekistan STZ Class AIII. ERGONOMICS, ACOUSTICS AND HYGIENICS3The product has been certified and bears the Mark, as applicable, of the Ergonomics, Acoustics and Hygienics authorities as indicated below.Country/Region Authority or MarkGermany GSIV. POWER CORDS AND USER DOCUMENTATIONDell products are provided with the power cord and user documentation suitable for the intended country of delivery. Products that are relocated to other countries should use nationally certified power cords and plugs to ensure safe operation of the product. Contact Dell to determine if alternate power cords or user documentation in other languages is available for your market.V. DATASHEET RESPONSIBLE PARTY NAME AND ADDRESSDell Inc.Department: Global Regulations and StandardsMS: PS4-30Round Rock, Texas 78682, USA******************************2 The above-listed EMC certifications may vary depending upon the location of the factory and specific product configuration. Certification marks may not be applied on products for countries outside the purchaser’s country.3 The above-listed Ergonomics, Acoustics and Hygienics certifications may vary depending upon the location of the factory and specific product configuration. Certification marks may not be applied on products for countries outside the purchaser’s country.VI. TRADE (IMPORT/EXPORT) COMPLIANCE DATAFor any questions related to importing & exporting classification of Dell products, please obtain information from the following link: /import_export_compliance or send request to*****************************VII. SYSTEM DIMENSION AND WEIGHTDepth, mm Width,mmHeight,mmWeight, kgProductRegulatoryModel #508 446 87 23.31 E04JVIII. DECLARATIONS AND CERTIFICATIONSThis system received the following approvals and may be labeled with one or more of these marks depending on point of purchase:Dell’s Energy Star qualified products are listed on the EPA website hereInformation on Dell’s participation in various Eco-labels and Green Standards can be found here.IX. PERFORMANCE DATAEnergy Consumption4Energy efficiency benefits the environment and lowers the total cost of equipment ownership by reducing power consumption. Dell offers energy calculators that help estimate power needs, potential emissions avoidance and potential cost savings. Click here for Dell’s Client Energy Savings Calculator, Data Center Capacity Planner, and Monitor Power Savings Calculator. Information on Energy Efficiency is available hereX. PRODUCT MATERIALS INFORMATION5Dell has implemented process controls and corrective actions throughout its organization and supply chain to ensure that its chemicals management objectives are met — and that the targeted restricted materials arereplaced and alternative materials are developed for future product generations. Process controls that Dellimplemented include piece-part supplier declarations and Dell factory and supplier material testing audits.To review Dell’s Restricted Material Guidance document click here.Information on Dell’s material use is available here.4 This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied.5Waste Handling. Local regulations should be observed when disposing of this product due to the presence of the materials and substances as listed above.Restricted SubstancesThrough internal design controls and supply chain declarations, this system has been verified to comply with the EU RoHS Directive. For more details, see /rohsinfo.All Dell products shipping directly into China which are manufactured on or after March 1st, 2007, will be China RoHS compliant. For more details, see /chinarohs.All Dell products shipping to South Korea are compliant with South Korea RoHS requirements, declarations here. Information on Japan RoHS (J-MOSS) chemical disclosures is available here.REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, 1907/2006) is the European Union’s (EU) chemical substances regulatory framework. Dell complies with the REACH directive. For more details, see /REACHThis Dell product does NOT contain any of the following substances (in concentrations exceeding legal threshold limits):∙ Asbestos∙Azo dyes/colorants in components that come into direct contact with human skin∙Cadmium and its compounds (except for use in applications exempted by the EU RoHS Directive)∙Ozone Depleting Substances; Class I and Class II CFCs (chlorofluorocarbons) and HCFCs (hydrofluorocarbons)∙Chloroparaffins, short chained (10-13 carbon chain)∙Chromium VI and its compounds (except for use in applications exempted by the EU RoHS Directive)∙Halogenated dioxins or furans (i.e. polychlorinated dibenzodioxines, polychlorinated dibenzofurans)∙Lead and its compounds (except for use in applications exempted by the EU RoHS Directive)∙Mercury (except for use in applications exempted by the EU RoHS Directive)∙Nickel and its compounds in components that are likely to result in prolonged skin exposure(polychlorobiphenyls)∙ PCBs(polychloroterphenyls)∙ PCTs(polybromobiphenyls)∙ PBBs∙PBDEs (polybrominated diphenylethers)∙BFR (brominated flame retardants) and PVC (polyvinyl chloride) in plastic parts greater than 25 grams ∙Polychlorinated naphthalenes (PCNs)∙Tributyl tin (TBT)∙Triphenyl tin (TPT)Additional Materials Information∙External and/or Internal cables may use PVC as an insulating material to ensure product safety∙The case material is, >PC+ABS <∙Product may contain post-industrial recycled content (plastics, metal, glass)∙This product contains 0% post-consumer recycled plastic∙Materials that may require special handling, please see WEEE Product End-of-Life Instructions here∙Marking of plastic parts greater than 25 grams are done in accordance with ISO 11469 (see below) Flame Retardants Used in MotherboardRetardantPart FlameMotherboard TBBPAFlame Retardants Used in Mechanical Plastic Parts > 25 gramsResin MaterialName Marking perISO11469:2000,11469:1996Flame RetardantMarking per ISO1043-4 (i.e. FR(16),FR(40), etc.)Flame Retardant(i.e. TBBPA, triarylphosphate ester,etc.)List applicableR-Phrase(s) orHazardStatement(s) perEU Directive67/548/EEG or1272/2008PC+ABS >PC+ABSFR(40)<FR(40)TPP(Triphenyl phosphate)N/AXI. PACKAGINGInformation on Dell’s sustainable packaging effort available here.No CFCs (chlorofluorocarbons), HCFCs (hydrofluorocarbons) or other ozone depleting substances are used in packaging material. Chromium, lead, mercury, cadmium are not intentionally added to packaging materials and are not present in a cumulative concentration greater than 100 ppm as incidental impurities. No halogenated plastics or polymers are used for packaging material. Dell complies with the EU Directive 94/62/EEC. Plastics packaging materials marked according to SPI (Society of Plastics Industry) Coding System.Additional materials restricted in Packaging as per Dell’s Restricted Material Guidance document found here.Packaging Materials for ModelE04J Total Weightof eachMaterialtype, (kg)% of Post-Consumer Recycled Content (PCR)APJ region DAO region EMEA regionCorrugated Fiberboard 5.80EPE 1.20Printed user documentation is bleached in a chlorine-free process.XII. BATTERIESBelow is a listing of batteries that could be present in the product:Battery Description – Internal Batteries Battery Type Battery Weight (kg) CR-2032 coin (button) cell Lithium Metal 0.003 ∙Batteries used in this product are in compliance with EU Battery Directive 2006/66/EC.∙Batteries in this product are not based on mercury, lead or cadmium technologies.∙Information about takeback and the recycling of batteries can be found in the in the Recyclability section below.∙The product documentation includes instructional information on the proper removal and disposal of the batteries used in this product.∙Dell MSDS sheets available here.XIII. DESIGN FOR ENVIRONMENTandUpgradingLongevityDell systems are, when applicable, designed for easy assembly, disassembly, and servicing. Connections are easy to find and accessible with commonly available tools. To extend the life of your system, you can install or upgrade certain system components (e.g., microprocessor, memory, expansion cards, optical drives, and storage devices). Spare parts (such as batteries, power supplies, keyboard parts) are available after the end of production for up to five years, or otherwise through the warranty period.RecyclabilityInformation for recycling is available here.For recyclability, this system incorporates the following design guidelines:∙EU WEEE mark is applied to products sold in Europe, EU recycling information can be found at /recycling∙WEEE Product End-of-Life Instructions are available here∙Plastic parts heavier than 25g have material codes according to ISO 11469:2000.∙Minimal use of composite structure materials.∙Minimal use of non-separable connections, such as gluing and welding between different materials∙Painting/coating of plastics <100 grams is compatible with recycling or reuse∙Mechanical plastic parts greater than 100 grams consist of one material or of easily separable materials.XIV. RECYCLING/ END-OF-LIFE SERVICE INFORMATIONTake back and recycling services are offered for this product in certain countries. If you want to dispose of system components, contact Dell for instructions by emailing *********************** or visit/recyclingworldwide and select the relevant country.XV. DELL CORPORATE ENVIRONMENTAL INFORMATIONInformation on Dell’s Environmental initiatives, policies, programs and goals can be found at/environment.Dell’s Corporate Responsibility Policies are available here.Product Safety, EMC and Environmental Datasheets for Dell products are located at:/regulatory_compliance_datasheetsDell is a member of the Electronic Industry Citizenship Coalition ()Dell’s commitment to accountability and assurance is further demonstrated in leveraging the Global Reporting Initiatives (GRI) G3 Guidelines in the preparation of our annual summary report and Web site. We are self-reporting at a B level and have submitted our self-report to GRI to check it against the criteria for GRI Application Level B. To view GRI Index 2009 click here.Dell holds International Organization for Standardization (ISO) and Occupational Health & Safety Assessment Series (OHSAS) certifications/registrations in a number of important areas including global product development and recycling/take-*back programs, quality, safety, and health and environment. You can view or download copies of certificates here.Information related to Supplier Responsibility is available here.。

beta three MU10内置2分频单10寸全频扬声器产品说明书.pdf

MU10内置2分频单10寸全频扬声器MU系列专业扬声器系统产品说明书CN UM-MU10-20110922v e r A感谢您购买产品！请仔细阅读本手册，它将帮助你妥善设置并运行您的系统，使其发挥卓越的性能。

并保留这些说明以供日后参照。

警告：为了降低火灾与电击的风险，请不要将产品暴露在雨中或潮湿环境中。

警告：为了降低电击的风险，非专业人士请勿擅自拆卸该系统。

仅供专业人士操作。

等边三角形中的闪电标记，用以警示用户该部件为非绝缘体，系统内部存在着电压危险，电压。

可能足以引起触电。

可能足以引起触电如系统标有带惊叹号的等边三角形，则是为提示用户严格遵守本用户指南中的操作与维护规定。

注意：请勿对系统或附件作擅自的改装。

未经授权擅自改装将造成安全隐患。

警告：燃不得将明火源(如点的蜡烛)放在器材上面。

1. 请先阅读本说明。

2. 保留这些说明以供日后参照。

3. 注意所有警告信息。

4. 遵守各项操作指示。

5. 不要在雨水中或潮湿环境中使用本产品。

6. 不要将产品靠近热源安装，例如暖气管、加热器、火炉或其它能产生热量的装置（包括功放机）。

7. 不要破坏极性或接地插头的安全性设置。

如果提供的插头不能插入插座，则应当请专业人员更换插座。

8. 保护好电源线和信号线，不要在上面踩踏或拧在一起（尤其是插头插座及穿出机体以外的部分）。

9. 使用厂商规定及符合当地安全标准的附件。

10.雷电或长时间不使用时请断电以防止损坏产品。

12. 不要让物体或液体落入产品内——它们可能引起火灾或触电。

13. 请注意产品外罩上的相关安全标志。

. 仅与厂商指定或与电器一同售出的推车、架子、三脚架、支架或桌子一起使用。

推动小车/电器时，应谨防翻倒。

11注意事项产品的安装调试须由专业人士操作。

在使用非本厂规定的吊装件时，要保证结构的强度并符合当地的安全规范。

警告：1扬声器及扬声器系统的产品有限保修期为自正式购买日起的3年。

由于用户不合理的应用而导致音圈烧毁或纸盆损坏等故障，不包含于产品保修项目。

33kV户外配电装置规格书20120217

第一章总则1.1 本技术规范书概括了用于本项目中使用的33kV户外开关设备设计制造、性能试验、包装运输、安装调试、验收和移交的最低要求；1.2 本技术规范书提出的是最低限度的技术要求，并未对一切技术细节作出规定，也未充分引述有关标准和规范的条文，供方提供符合GB、GB/T和IEC最新版本标准的优质产品；1.3 如果供方未以书面形式对本技术规范书的条文提出异议，则意味着供方提供的设备完全符合本技术规范书的要求。

如有异议，不管是多么微小，都在投标书中以“与技术规范书的差异或偏差”为标题的专门章节中加以详细描述；1.4 在签订供货合同之后，需方有权因规范、标准、规程发生变化而提出补充要求。

如项目业主有特殊要求，供方有责任和需方共同与业主进行技术谈判，并根据三方意见修改设计；1.5 所有单位采用国际单位制 SI，电气图例符号应符合IEC标准的规定；1.6 本技术规范书所使用的标准如与供方所执行的标准发生矛盾时，按其中要求较高的标准执行；1.7 本技术规范书经供、需双方确认签字后作为采购合同的技术附件，与合同正文具有同等的法律效力；1.8 本技术规范书未尽事宜，由供、需双方协商确定。

第二章环境条件与设计要求2.1 站点类型：发电厂2.2 气象条件多年统计气象特征值如下:海拔高度： 751 m年平均气温： 22.85 ℃最冷月平均气温： 17.56 ℃最热月平均气温： 31.96 ℃极端最热气温： 42 ℃极端最低气温： 0 ℃平均湿度： 51.74%日平均降雨量: 1.3mm最大风速： 27.4m/s地震烈度：无地震2.3 系统概况：系统电压33kV系统最高电压40.5kV系统额定频率50Hz系统中性点接地方式不接地2.4 安装要求：室外混凝土基础上安装2.5 供方提供的产品适用于上述条件并能正常工作，如果装置中使用的元器件不适于这些条件，供方采取适当的措施以保证其正常工作。

2.6 产品采用全封闭包装。

33kV户外开关设备的结构保证成功的运输，以便到达运输目的地后，33kV户外开关设备能有立即安装和投入运行的条件。

Yokogawa P10系列产品参数说明书

P10-1-1●DN-843V-600V/DN-848VI-10V/DN-848VI-80V/DN-848VI-150V- - - - - - - - - - - - P 10-1-1Current P10-2-1●DN-843I-CT-1/DN-843I-CT-10/DN-843I-CT-20/DN-843I-CT-50 - - - - - - - - - - - - P 10-2-1P10-3-1●SG-3011/SG-3013/SG-3016/SG-3071/SG-3081 - - - - - - - - - - - - - - - - - - - - - - P 10-3-1 ●PW-3090-24S/PW-3090-12S/PW-3090-5S/PW-3090-4824S-12 - - - - - - - - - - - - P 10-3-1Relay Modules P10-4-1●DN-PR4//RM-104, RM-108, RM-116/RM-204, RM-208, RM-216 - - - - - - - - - - - P 10-4-1 ●DN-SSR4/DN-SSR4DC●RM-20.22/RM-22.22/RM-38.61/RM-48.61/RM-48.62Power Supplies P10-5-1●KA-52F/DIN-KA52F/KA52F-48/DIN-KA52F-48 - - - - - - - - - - - - - - - - - - - - - - - P 10-5-1 ●MDR-20-24/MDR-60-24/MDR-60-48 ●DP-660/DP-1200P10-6-1●TPM-4100/TP-4100 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 10-6-1 ●TP-3070 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 10-6-2MISC P10-7-1●I-7560/USB-2020/USB-2560/RK-3UD-R - - - - - - - - - - - - - - - - - - - - - - - - - - P 10-7-1AccessoriesProfessional Provider of High Quality I ndustrial C omputer P roducts and D ata A cquisition S ystems Vol. PAC 2.0.0A c c e s s o r i e s101Vout1GND Vout2GND Vout3GND+Vs GND F .G.NC Vin 1 -Vin 1+NC Vin 2 -Vin 2+NC Vin 3 -Vin 3+Vin 1 -Vin 1+Vin 2 -Vin 2+Vin 3 -Vin 3+Vin 4 -Vin 4+Vin 5 -Vin 5+Vin 6 -Vin 6+Vin 7 -Vin 7+Vin 8 -Vin 8++Vs GND F .G.Vout1 +OP Amp1OP Amp2OP Amp3OP Amp4OP Amp5OP Amp6OP Amp7OP Amp8Vout1 -Vout2 +Vout2 -Vout3 +Vout3 -Vout4 +Vout4 -Vout5 +Vout5 -Vout6 +Vout6 -Vout7 +Vout7 -Vout8 +Vout8 -DN-843V-600VDN-848VI-10V/DN-848VI-80V/DN-848VI-150V10.1. Voltage AttenuatorThe DN-800V series are voltage input attenuator . The maximum input range is from ±80 V to +/- 600 V and can be attenuated to ±10 V . The "I" version provide 3000 V DC intra-modules isolation and 3000 V DC channel to channel isolation to avoid the noise interference from inputs to outputs or channel to channel. It can be used with the analog input modules such as I-7017 and I-87017 etc. to measure the high voltage.DN-848VI-80VDN-848VI-150VAC/DC Source InputHigh Voltage Input Measurement Linear Attenuation Ratio High Input ImpedanceChannel to Channel Isolation forDN-848VI-10V , DN-848VI-80V and DN-848VI-150V 4 kV ESD Protection 3 kV Surge Protection RoHS ComplianceOperating Temperature: -25 ~ +75°C Easily Wire ConnectionDN-848VI-10VDN-843V-600V IntroductionApplicationsAppearanceProgrammable Automation Controller Products10-1-2Website:E-mail:*******************.PAC2.0.00Accessories101General Channels 8883Input Type AC/DC VoltageInput Range +/- 10 V pp+/- 80 V pp+/- 150 V pp+/- 600 V ppOutput Range +/- 10 V pp Accuracy1% of FSRChanel to Channel Isolation Yes, 3000 V DC-Bandwidth 30 KHz100 KHzInput Impedance> 1 M ΩIntra-module Isolation, Input to Output 3000 V DC -EMS Protection ESD (IEC 61000-4-2)+/- 4 kV contact for power line, input and output channels , +/- 8 kV air for random pointSurge (IEC 61000-4-5)+/- 3 kV for power linerPower Input Input Range +10 ~ +30 V DCPower Consumption 9.2 W9.2 W9.2 W0.56 WMechanicalDimensions (W x L x H)122 mm x 174 mm x 33 mm122 mm x 174 mm x 24.5 mmInstallation DIN-Rail MountingEnvironment Operating Temperature -25 ~ + 75°C Storage Temperature -30 ~ +75°CHumidity10 ~ 90% RH (non-condensing)8-channel 10 V Voltage Attenuator (RoHS)8-channel 80 V Voltage Attenuator (RoHS)8-channel 150 V Voltage Attenuator (RoHS)3-channel 600 V Voltage Attenuator (RoHS)MDR-20-24 CR24 V/1 A, 24 W Power Supply with DIN-Rail Mounting (RoHS)I-7017-G CR 8-channel Analog Input Module (RoHS)I-87017-G CR 8-channel Analog Input Module (RoHS)Selection GuideDN-84-x xx xxx Number of Channels 3: 3 channels 8: 8 channelsV: VoltageI: Channel to channel IsolationInput Voltage RangeDimensions (Units: mm)Bottom View Top View Bottom ViewTop View Left View Front View Rear ViewRight View Left View Front View Rear ViewRight View Speci ﬁ cationsOrdering InformationAccessoriesProfessional Provider of High Quality I ndustrial C omputer P roducts and D ata A cquisition S ystems Vol. PAC 2.0.00102A c c e s s o r i e sDN-843I-CT-20DN-843I-CT-50DN-843I-CT-10DN-843I-CT-1 10.2. Current TransformerThe maximum input range is from ±1 A to +/- 50 A and can be attenuated to from ±1.6 V to ±10 V . The "I" version provide 3000 V DC intra-modules isolation and 3000 V DC channel to channel isolation to avoid the noise interference from inputs to outputs or channel to channel. It can be used with the analog input modules such as I-7017 and I-87017 etc. to measure the high current.AC/DC Source Input Linear Attenuation RatioHigh Current Input MeasurementIsolation InputChannel to Channel Isolation4 kV ESD Protection RoHS ComplianceOperating Temperature: -25 ~ +75°C Easily Wire ConnectionInstallationCh1 Current InputCh2 Current InputCh3 Current Input24 V DCCh1 OutputCh2 OutputCh3 OutputF.G. IntroductionApplicationsProgrammable Automation Controller Products10-2-2Website:E-mail:*******************.PAC2.0.00Accessories102General Channels 3Input Type AC/DC CurrentInput Range +/- 1 A+/- 10 A+/- 20 A+/- 50 AOutput Type AC/DC VoltageOutput Range +/- 1.6 V pp+/- 10 V pp+/- 10 V pp+/- 4 V ppCT Type Solid Core (closed)Accuracy1% of FSR Chanel to Channel IsolationYes, 3000 V rmsIntra-module Isolation, Input to Output 3000 V DC Bandwidth 50 KHz Input Impedance > 1 M ΩEMS Protection ESD (IEC 61000-4-2)+/- 4 kV contact for power line, input and output channels, +/- 8 kV air for random pointPower Input Input Range +10 ~ +24 V DCPower Consumption 1.2 WMechanicalDimensions (W x L x H)148 mm x 83 mm x 39 mmInstallation DIN-Rail Mounting Environment Operating Temperature -25 ~ + 75°C Storage Temperature -30 ~ +75°CHumidity10 ~ 90% RH (non-condensing)3-channel 1 A Current Transformer (RoHS)3-channel 10 A Current Transformer (RoHS)3-channel 20 A Current Transformer (RoHS)3-channel 50 A Current Transformer (RoHS)MDR-20-24 CR24 V/1 A, 24 W Power Supply with DIN-Rail Mounting (RoHS)I-7017-G CR 8-channel Analog Input Module (RoHS)I-87017-G CR8-channel Analog Input Module (RoHS)DN-84--xxxx xC: CurrentCT: Current TransformerInput Current RangeBottom ViewTop ViewLeft ViewFront ViewRight ViewNumber of Channels3: 3 channelsSelection GuideDimensions (Units: mm)Speci ﬁ cationsOrdering InformationAccessoriesI C P roducts and D ata A cquisition S ystems Vol. PAC 2.0.00103A c c e s s o r i e s10.3. Signal Conditioning Modules (SG-3000 Series)DescriptionSG-3016SG-3071SG-3081PicturesAnalog Input Channel 11111Wiring Differential 2/3/4 wiresDifferential Differential Differential Signal ThermocoupleRTDStrain GaugeVoltage Current Type Type J, K, T , E, R, S, B, N, C, L,M, L2Pt100 α=0.00385, Pt100α=0.003916, Ni 120, Pt1000α=0.00385±10 mV , ±20 mV , ±30 mV ,±50 mV , ±100 mV ±5 V ,±10 V 0 ~ 20 mA, 4 ~ 20 mAResolution 12-bit 12-bit ---Accuracy ±0.2% of FSR±0.1% of FSR±0.1% of FSR±0.1% of FSR±0.1% of FSRInput Impedance 1.8 M Ω-- 1.6 M Ω250 ΩExcitation Voltage --0 ~ 10 V--Analog Output Channel 11111Current Output 0 ~ 20 mA 0 ~ 20 mA, 4 ~ 2 0mA 0 ~ 20 mA0 ~ 20 mA, 4 ~ 20 mA0 ~ 20 mA, 4 ~ 20 mA Voltage output 0 ~ 10 V0 ~ 5 V , 0 ~ 10 V±5 V , ±10 V , 0 ~ 5 V , 0 ~ 10 V±5 V , ±10 V0 ~ 5 V , 0 ~ 10 VSystem 3-way Isolation 1000 V DC Power Input 10 ~ 30 V DCPower Consumption 1.44 W1.2 W1.44 W 1.8 W1.61 WOperating Temperature -25 ~ +75°CDimensions (W x H x D)25 mm x 114 mm x 71 mmPW-3090-5SPW-3090-4824S-12PicturesInput 18 ~ 36 V (non-regulated)18 ~ 36 V (non-regulated)18 ~ 36 V (non-regulated)48 V (non-regulated)Output ********(Max.)********(Max.)5 V @ 2 A (Max.)********(Max.)Isolation 1000 V DCEf ﬁ ciency83% Typical Operating Temperature -25 ~ +75°CDimensions (W x H x D)25 mm x 114 mm x 71 mmSG-3000 series signal conditioning modules are used to accept wide range of input signals, such as voltage, current, temperature (thermocouple and RTD) and provide 0 ~ 10 V DC , 0 ~ 20 mA, 4 ~ 20 mA output signals. It gives following good features for industrial applications • 3-way (power/input/output) isolation (1000 V DC )• Wide operating temperature (-25 ~ +75°C)• DIN-Rail mounting• Input and output connectors on the opposite side • Signal range con ﬁ gureable by swtichIntroductionApplicationsProgrammable Automation Controller Products10-4-1Website:E-mail:*******************.PAC2.0.00Accessories104RM-38.61RM-48.61RM-48.62PicturesRelay Finder 20.22.9.024.4000Finder 22.22.9.024.4000Finder 34.51.7.024.0010FINDER - 40.61.7.024.0000FINDER - 44.62.7.024.0000Type Step RelayPower RelayChannel 1ContactForm A (DPST)Form A (DPST)Form C (SPDT)Form C (SPDT)Form C (SPDT)Operating Voltage Range 230 V AC 230 V AC 250 V AC 250 V AC 250 V AC Max. Load Current 16 A 20 A 6 A 16 A 10 A Operate Time 15 ms 15 ms 5 ms 7 ms 7 ms Release Time 8 ms8 ms3 ms 3 ms3 msLED Indicator -MechanicalDimensions (W x L x D)17.5 mm x 84 mm x 62.7 mm 76.5 mm x 6.5 mm x 89 mm75 mm x 15.5 mm x 78.5 mmInstallationDIN-Rail MountingNote1: RM-38.61: 5 pcs in one packageRM-48.61: 4 pcs in one package RM-48.62: 4 pcs in one packageNote2: RM-38-093.20is a 20-way jumper link for RM-38.61DN-SSR4PicturesRelay A5P-204UD3P-054Type Solid-State Relay Channel 4 channels ContactForm A (SPST)Operating Voltage Range 250 V AC /30 V DC50 V DCMax. Load Current 4 AOperate Time 1/2 Cycle + 1ms and below 0.5 ms and below (Resistance load)Release Time 1/2 Cycle + 1ms and below0.5 ms and below (Resistance load)LED Indicator Yes (for Relay status)MechanicalDimensions (W x L x D)101 mm x 77 mm x 66 mmInstallationDIN-Rail MountingPicturesRelay VE-24H5-K FINDER - 40.61.7.024.0000FINDER - 44.52.7.024.0000Type Power Relay Channel 4RM-104: 4 channels RM-108: 8 channels RM-116: 16 channels RM-204: 4 channels RM-208: 8 channels RM-216: 16 channels ContactForm C Form C (SPDT)Form C (DPDT)Operating Voltage Range 250 V AC /30 V DC250 V AC 250 V AC Max. Load Current 5 A 16 A 6 A Operate Time 10 ms (Typical)7 ms (Typical)8 ms (Typical)Release Time 5 ms (Typical)3 ms (Typical) 5 ms (Typical)LED Indicator Yes (for Relay status)MechanicalDimensions (W x L x D)96 mm x 103 mm x 34 mmRM-104: 79 mm x 87 mm x 63 mm RM-108: 135 mm x 87 mm x 63 mm RM-116: 270 mm x 87 mm x 63 mmRM-204: 90 mm x 87 mm x 63 mm RM-208: 169 mm x 87 mm x 63 mm RM-216: 327 mm x 87 mm x 63 mmInstallationDIN-Rail Mounting10.4. Relay ModulesI ndustrial C omputer P roducts and D ata A cquisition S 105A c c e s s o r i e s10.5. Power SuppliesModelsKA-52F DIN-KA52F KA-52F-48DIN-KA52F-48Input Range 100 ~ 250 V AC Frequency 50 ~ 60 HzOutput Power 24 V DC /1.04 A Max., 25 W48 V DC /0.52 A Max., 25 WMechanicalDimensions(W x H x D, Units: mm)54 x 93 x 36 68 x 107 x 50 54 x 93 x 36 68 x 107 x 50 Installation No-mountingDIN-Rail MountingNo-mountingDIN-Rail MountingEnvironmentalOperating Temperature 0 ~ +50°C Storage Temperature-20 ~ +85°CModelsMDR-20-24MDR-60-24MDR-60-48Input Range 100 ~ 250 V AC Frequency 50 ~ 60 HzOutput Power 24 V DC /1 A Max., 24 W24 V DC /2.5 A Max., 60 W48 V DC /1.25 A Max., 60 WMechanicalDimensions (W x H x D)22.5 mm x 90 mm x 100 mm 40 mm x 90 mm x 100 mm 40 mm x 90 mm x 100 mmInstallation DIN-Rail MountingEnvironmental Operating Temperature -20 ~ +70°C Storage Temperature-20 ~ +85°CModelsDP-660DP-1200Input Range 100 ~ 250 V AC Frequency 50 ~ 60 HzOutputPower 24 V DC /2.5 A Max., 60 W and5 V DC /0.5 A Max., 2.5 W24 V DC /5.0 A Max., 120 WMechanicalDimensions (W x H x D)44 mm x 145 mm x 158 mm 65 mm x 111 mm x 125 mmInstallation DIN-Rail MountingEnvironmentalOperating Temperature 0 ~ +50°C -10 ~ +70°C Storage Temperature-20 ~ +85°C-25 ~ +85°CKA-52F CR 24 V DC /1.04 A, 25 W Power Supply (RoHS)DIN-KA52F CR 24 V DC /1.04 A, 25 W Power Supply with DIN-Rail Mounting (RoHS)KA-52F-48 CR 48 V DC /0.52 A, 25 W Power Supply (RoHS)DIN-KA52F-48 CR48 V DC /0.52 A, 25 W Power Supply with DIN-Rail Mounting (RoHS)MDR-20-24 CR 24 V DC /1 A, 24 W Power Supply with DIN-Rail Mounting (RoHS)MDR-60-24 CR 24 V DC /2.5 A, 60 W Power Supply with DIN-Rail Mounting (RoHS)MDR-60-48 CR48 V DC /1.25 A, 60 W Power Supply with DIN-Rail Mounting (RoHS)DP-660 CR 24 V DC /2.5 A, 60 W and 5 V DC /0.5 A, 2.5 W Power Supply with DIN-Rail Mounting (RoHS)DP-1200 CR24 V DC /5.0 A, 120 W Power Supply with DIN-Rail Mounting (RoHS)KA-52F/DIN-KA52F KA52F-48/DIN-KA52F-48MDR-20-24MDR-60-24MDR-60-48DP-660DP-1200KA-52F KA-52F-48MDR-60-24/MDR-60-48DP-1200MDR-20-24DP-660DIN-KA52F DIN-KA52F-48Speci ﬁ cationsSpeci ﬁ cationsSpeci ﬁ cationsOrdering InformationOrdering InformationOrdering InformationProgrammable Automation Controller Products10-6-1Website:E-mail:*******************.PAC2.0.00Accessories106TPM-4100TP-410010.6. Touch Panel MonitorTPM-4100/TP-410010.4" Touch Panel Monitor10.4" LCD supports 800 x 600 resolution Resistive Touch Panel Full-function OSD controlDriver Support: Windows 2k/XP/Vista/7/WESWinCE 5.0/6.0 LED backlight technology Aluminum Casing for TPM-4100 IP65 Comlipant Front PanelWide operating temperature: -25 ~ +75°CTPM-4100TP-4100Display Size 10.4”Resolution 800 x 600Max. Color 16.7 M Brightness (cd/m2)320Contrast Ratio 500 : 1Viewing Angle (H/V)140/130Backlight Life (hrs)50,000Touch Panel 4-wire5-wireanalog resistive, RS-232 or USB1.1 (Type B) interfaceInput SignalVGA (Analog RGB)MMI (Man Machine Interface)OSD Control Functions: Brightness, Contrast, Phase, Horizontal Position,Vertical Position and SharpnessPower Switch YesLED Indicators Power , Display signal is detectedPower Input Range +12 ~ 48 V DCPower Consumption 8.5 WMechanical MaterialAluminumPlasticDimensions (W x L x H)293 mm x 231 mm x 53 mm290 mm x 228 mm x 53 mm Installation Panel MonutingPanel Monuting, VESA (75 × 75) MountingIngress Protection Front panel: IP65Environmental Operating Temperature -25 ~ +75°C Storage Temperature -30 ~ +80°CAmbient Relative Humidity10 ~ 90% RH (non-condensing)10.4" (800 x 600) resistive touch panel monitor with RS-232 or USB interfaceAccessories: Power supply, VGA cable, RS-232 cable, USB cable, Mounting clamps and screws TP-4100 with Aluminum Casing273210.8TPM-4100 Dimensions (Units: mm)Speci ﬁ cationsAppearanceOrdering InformationUSB USBOSD OSDRS-232RS-232VGAVGA Power Switch Power Switch VESA (75 × 75) Mounting12 ~ 48 DC IN12 ~ 48 DC INI ndustrial C omputer P roducts and D ata A cquisition S ystems Vol. PAC 2.0.00106A c c e s s o r i e sTP-30707" Touch Panel Monitor7" LCD supports 800 x 480 resolution Resistive Touch Panel Full-function OSD controlDriver Support: Windows 2k/XP/Vista/7/WESWinCE 5.0/6/0 LED backlight technology IP65 Comlipant Front PanelWide operating temperature: -20 ~ +70°CTP-3070Display Size 7”Resolution 800 x 480Brightness (cd/m2)320Contrast Ratio 500 : 1Viewing Angle (H/V)140/120Backlight Life (hrs)20,000Touch Panel 4-wire, analog resistive, RS-232 or USB1.1 (TypeB) interfaceInput SignalVGA (Analog RGB)MMI (Man Machine Interface)OSD Control Functions: Brightness, Contrast, Clock, Phase, Horizontal Position, Vertical Position and SharpnessPower Switch YesLED Indicators Power , Display signal is detectedPower Input Range +12 ~ 48 V DCPower Consumption 5 WMechanicalDimensions (W x L x H)213 mm x 148 mm x 44 mmCasingPlastic Ingress Protection Front panel: IP65Environmental Operating Temperature -20 ~ +70°C Storage Temperature -30 ~ +80°CAmbient Relative Humidity10 ~ 90% RH (non-condensing)7" (800 x 480) resistive touch panel monitor with RS-232 or USB interfaceAccessories: Power supply, VGA cable, RS-232 cable, USB cable, Mounting clamps and screwsDimensions (Units: mm)Speci ﬁ cationsOrdering InformationProgrammable Automation Controller Products10-7-1Website:E-mail:*******************.PAC2.0.00Accessories 107InterfaceUSBCompatibility: USB 1.1 and 2.0 standards RS-232TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI and GND; non-isolated Baud Rate300 ~ 115200 bps DriverWindows 98/ME/2000/XP/Vista (32/64-bit)/7 (32/64-bit)/LinuxMechanicalDimensions (W x H x D)33 mm x 60 mm x 15 mm Environmental Operating Temperature-25 ~ +75°C Storage Temperature -30 ~ +75°CInterfacePortsUpstream x 1 (Type B); Downstream x 4 (Type A)CompatibilitySpeci ﬁ cation Rev. 2.0/1.1/1.0Transfer Speed480 Mbit/s-high speed mode Input Voltage Range+10 ~ +30 V DCMechanicalDimensions (W x H x D)33 mm x 107 mm x 78 mm InstallationDIN-Rail Mounting Environmental Operating Temperature -0 ~ +70°C Storage Temperature -20 ~ +80°CMechanical Dimensions (W x H x D)481 mm x 132 mm x 125 mm USB-2020 CR USB Audio Device (RoHS)RK-3UD-R 19" Rack Mounting Kit, 3U I-7560 CR USB to RS-232 Converter (RoHS)USB-2560 CR4-port Industrial USB 2.0 Hub (RoHS)USB-2560/S CR 4-port Industrial USB 2.0 Hub (RoHS) with GPSU06U-6 (Power Supply)RK-3UD-R I-7560InterfaceOutput ChannelsMono, Stereo (L + R)Input ChannelsMono, Stereo (L + R)ButtonHID volume up, volume down and Mute Input Voltage Range+10 ~ +30 V DCMechanicalDimensions (W x H x D)33 mm x 107 mm x 78 mm Installation DIN-Rail Mounting Environmental Operating Temperature-25 ~ +75°C Storage Temperature -40 ~ +85°C 10.7. MISC Speci ﬁ cationsSpeci ﬁ cationsSpeci ﬁ cationsSpeci ﬁ cationsOrdering InformationOrdering InformationOrdering Information Ordering Information USB to RS-232 Converter USB-2020USB-2560USB Audio Device 4-Port Industrial USB 2.0 Hub19" Rack Mounting Kit, 3UiP-84112-4-3 iP-88112-4-3 iP-84412-4-3 iP-88412-4-3 iP-8441-FD2-4-3 iP-8841-FD2-4-3 iP-84172-4-5Model Name PageiP-84472-4-5iP-88172-4-5iP-88472-4-5I-87005W5-2-1I-87013W5-2-1I-87015PW5-2-2I-87015W5-2-2I-8014W5-2-3I-8017DW5-2-3I-8017HCW5-2-3I-8017HW5-2-3I-8024DW5-2-3I-8024W5-2-3I-87017DW5-2-4I-87017RCDW5-2-4I-87017RCDW-AI5-2-4I-87017RCW 5-2-4I-87017RW 5-2-4I-87017W5-2-4I-87017W-A55-2-4I-87017ZW5-2-4I-87018PW5-2-5I-87018RW5-2-5I-87018W5-2-5I-87018ZW5-2-5I-87019PW5-2-6I-87019RW5-2-6I-87019ZW5-2-6I-87024W 5-2-7I-87024CW5-2-7I-87024DW 5-2-7I-87024RW 5-2-7I-87024UW 5-2-7I-87028CW5-2-7I-8040PW5-3-1I-8040W5-3-1I-8046W5-3-1I-8048W5-3-1I-8051W5-3-1I-8052W5-3-1I-8053W5-3-1I-8053PW5-3-1Model Name PageI-8058W5-3-1I-87040W5-3-2I-87040PW5-3-2I-87046W5-3-2I-87051W5-3-2I-87052W5-3-2I-87058W5-3-2I-87059W5-3-2I-87053W5-3-3I-87053PW5-3-3I-87053W-A55-3-3I-87053W-AC15-3-3I-87053W-E55-3-3I-8037W5-3-4I-8041W5-3-4I-8041RW5-3-4I-8041AW5-3-4I-8056W5-3-4I-8057W5-3-4I-8057RW5-3-4I-8057PW5-3-4I-8060W5-3-4I-8064W5-3-4I-8068W5-3-4I-8069RW5-3-4I-8069W5-3-4I-87037W5-3-5I-87041W 5-3-5I-87057W5-3-5I-87057PW5-3-5I-87061W5-3-5I-87064W5-3-5I-87065W5-3-5I-87066W5-3-5I-87068W5-3-5I-87069W5-3-5I-87069PW5-3-5I-8042W5-3-6I-8050W5-3-6I-8054W5-3-6I-8054RW5-3-6I-8055W5-3-6Model Name PageI-8063W5-3-6I-87042W5-3-7I-87054W5-3-7I-87055W5-3-7I-87063W5-3-7I-8026PW5-4-1I-87016W5-4-1I-87026PW5-4-1I-87089W/S5-5-1I-8084W5-6-1I-8088W5-6-1I-87082W5-6-1I-87084W5-6-1I-87088W5-6-1I-8092F5-7-1I-8093W5-7-1I-80945-7-1I-8094A5-7-1I-8094F5-7-1I-8094H5-7-1I-75105-8-1I-7510A5-8-1I-7510AR5-8-1I-75135-8-1I-7514U5-8-1I-7520 5-8-1I-7520A5-8-1I-7520AR5-8-1I-7520R5-8-1I-7520U45-8-1I-75515-8-1I-8112iW5-8-1I-8114iW5-8-1I-8114W5-8-1I-8142iW5-8-1I-8144iW5-8-1I-25325-9-2I-25335-9-2I-75305-9-2I-7530A5-9-2I-7530A-MR5-9-2I-7530-FT5-9-2Model IndexI-75315-9-2 I-75325-9-2 I-7540D5-9-2 I-7540D-MTCP5-9-2 I-7540D-WF5-9-2 I-75655-9-2I-7565-H15-9-2 I-7565-H25-9-2 I-8120W5-9-2 I-8123W5-9-2 I-8124W5-9-2 I-871235-9-2 I-871245-9-2 I-87H17W5-10-1 I-87H24W5-10-1 I-75475-10-1 I-75675-10-1 I-75705-10-1 I-8172W5-11-1 I-8212W5-12-1 I-8212W-3GWA5-12-1 I-8213W5-12-1 I-8213W-3GWA5-12-1 I-87211W 5-12-1 iP-8441-MTCP6-3-2 iP-8841-MTCP6-3-2 I-7188XG7-1-6 I-7188XGD7-1-6 I-71887-1-9 I-7188D7-1-9 I-7188XA7-1-9 I-7188XAD7-1-9 I-7188XB7-1-9 I-7188XBD7-1-9 I-7188XC7-1-9 I-7188XCD7-1-9 I-7188EA7-1-11 I-7188EAD7-1-11 I-7188EX7-1-11 I-7188EXD7-1-11 I-756010-7-1 iDCS-88309-1-3USB-87P25-4-2USB-87P45-4-2USB-87P85-4-2USB-202010-7-1USB-256010-7-1WP-8131 2-2-3WP-84312-2-3WP-88312-2-3WP-81412-2-3WP-84412-2-3WP-88412-2-3WP-80512-2-3WP-83512-2-3WP-87512-2-3WP-81372-2-6WP-84372-2-6WP-88372-2-6WP-81472-2-6WP-84472-2-6WP-88472-2-6WP-80572-2-6WP-83572-2-6WP-87572-2-6WP-81392-2-11WP-84392-2-11WP-88392-2-11PROFI-82556-6-2PROFI-84556-6-2PROFI-88556-6-2PW-3090-5S10-3-1PW-3090-12S10-3-1PW-3090-24S10-3-1PW-3090-4824S-1210-3-1USB-87P15-4-2iDCS-8830R9-1-3PROFI-81556-6-2XP-8349-Atom-CE62-1-14 XP-8749-CE62-1-14 XP-8749-Atom-CE62-1-14 X1017-2-3 X1067-2-3 X1077-2-3 X1107-2-3 X1117-2-3 X2007-2-3 X2027-2-3 X2037-2-3 X3027-2-3 X3037-2-3 X3047-2-3 X3057-2-3 X3087-2-3 X3107-2-3 X3247-2-3 X5037-2-3 X5047-2-3 X5057-2-3 X5067-2-3 X5077-2-3 X5087-2-3 X5097-2-3 X5107-2-3 X510-1287-2-3 X5117-2-3 X5187-2-3 X6037-2-3 X6077-2-3 X6087-2-3 X7027-2-3 X7037-2-3 XV1168-4-1 XV107Ai8-4-2 XV107i8-4-2 XV110i8-4-2 XV111Ai8-4-2 XV111i8-4-2 XW1078-4-2 XW107i8-4-2μPAC-51078-1-7μPAC-5107D8-1-7μPAC-52078-1-7μPAC-5207D8-1-7μPAC-53078-1-7μPAC-5307D8-1-7μPAC-55078-1-7μPAC-5507D8-1-7 XW110i8-4-2XV304i8-4-3XV305i8-4-3XV308i8-4-3XV310i8-4-3XW3048-4-4XW3108-4-4XW310C8-4-4XW5068-4-5XW5078-4-5XW5088-4-5XW5098-4-5XW511i8-4-5XW5148-4-5μμPAC-7186EX 7-1-4μPAC-7186EXD 7-1-4μPAC-7186EX-FD 7-1-4μPAC-7186EXD-FD 7-1-4μPAC-7186EX-SM 7-1-4μPAC-7186EXD-SM 7-1-4μPAC-7186EG7-1-6μPAC-7186EG-D7-1-6μPAC-50018-1-6μPAC-5001D8-1-6μPAC-5001-FD8-1-6μPAC-5001D-FD8-1-6μPAC-5101 8-1-6μPAC-5101D 8-1-6μPAC-52018-1-6μPAC-5201D8-1-6μPAC-53018-1-6μPAC-5301D8-1-6μPAC-55018-1-6μPAC-5501D8-1-6μPAC-5801 8-1-6μPAC-5801D8-1-6μPAC-59018-1-6μPAC-5901D8-1-6μPAC-50078-1-7μPAC-5007D8-1-7WP-81492-2-11WP-84492-2-11WP-88492-2-11WP-80592-2-11WP-83592-2-11WP-87592-2-11WP-51418-2-4WP-5141-OD8-2-4WP-52318-2-6WP-5231-2G8-2-6WP-5231-3G8-2-6WP-5231-GPS8-2-6WP-5231-WF8-2-6WP-5231-ZH8-2-6WP-5231-ZS8-2-6WP-51478-2-8WP-5147-OD8-2-8WP-51498-2-11WP-5149-OD8-2-11XXP-8041 2-1-5XP-8141-Atom2-1-5XP-83412-1-5XP-8341-Atom2-1-5XP-87412-1-5XP-8741-Atom2-1-5XP-8041-CE62-1-7XP-8141-Atom-CE62-1-7XP-8341-CE62-1-7XP-8341-Atom-CE62-1-7XP-8741-CE62-1-7XP-8741-Atom-CE62-1-7XP-8047-CE62-1-9XP-8147-Atom-CE62-1-9XP-8347-CE62-1-9XP-8347-Atom-CE62-1-9XP-8747-CE62-1-9XP-8747-Atom-CE62-1-9XP-8049-CE62-1-14XP-8149-Atom-CE62-1-14XP-8349-CE62-1-14 Model Index。

SMC产品说明书：PPA100 PPA101 PPA102型号的Compact Manometer

Instruction Manual Compact ManometerPPA100 / PPA101 / PPA102The intended use of this product is for pressure measurement.These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.”They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC) *1), and other safety regulations. *1)ISO 4414: Pneumatic fluid power - General rules relating to systems. ISO 4413: Hydraulic fluid power - General rules relating to systems.IEC 60204-1: Safety of machinery - Electrical equipment of machines. (Part 1: General requirements)ISO 10218-1: Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots.• Refer to product catalogue, Operation Manual and Handling Precautions for SMC Products for additional information. • Keep this manual in a safe place for future reference.CautionCaution indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.WarningWarning indicates a hazard with a medium level of riskwhich, if not avoided, could result in death or serious injury.DangerDanger indicates a hazard with a high level of risk which, ifnot avoided, will result in death or serious injury.Warning• Always ensure compliance with relevant safety laws and standards.• All work must be carried out in a safe manner by a qualified person in compliance with applicable national regulations.• Refer to the operation manual or catalogue on the SMC website (URL: https://) for further Safety Instructions.2 Specifications2.1General specificationsModelPPA100 High pressure PPA101 Vacuum PPA102 Low pressure Rated pressure range-0.1 to 1 MPa -101 to 10 kPa -10 to 100kPaDisplay method 3 digit LCD with backlight Pressure displaydiscrimination1/100Minimum display unit kPa - 1 1 MPa 0.01 - -mmHg- 5 - kgf/cm 20.1 0.01 0.01 inHg - 0.2 -psi 1 0.1 0.1 bar 0.1 0.01 0.01Error displayOver pressure, Memory data error,Change battery signFunctionPeak / bottom display, backlight, Auto powerOFF, Zero clear, Units display switchingWithstand pressure 1.5 MPa 200 kPa 200 kPa Applicable fluid Air, Non-corrosive gases, non-flammable gas Power supply voltage 3 VDC, Type AA dry cell x 2 pcs.Battery life12 months continuous operation(without backlight, at 25°C)Response speed 250 ms Display accuracy ±2% F.S. (at 25°C) Repeatability ±1% F.S. (at 25°C) Temperaturecharacteristics±3% F.S. (0 to 50°C with 25°C standard)Connection port size M5 x 0.8 Operatingtemperature range 0 to 50°C (no condensation)Operating humidityrange35 to 85% RH (no condensation)Enclosure rating IP40 Weight 100 g (Unit: 50 g, Battery: 50 g) *1) Batteries (manganese R6 or alkaline LR6) not included.*2) For the type without the unit switching function are fixed to SI units (kPa or MPa.*3) With regard to the compatibility condition for EMC, the pressure display value variation is ±15% F.S. or less.WarningSpecial products (-X) might have specifications different from those shown in this section. Contact SMC for specific drawings.3 Installation3.1 InstallationWarning• Do not install the product unless the safety instructions have been read and understood.3.2 EnvironmentWarning• Do not use in an environment where corrosive gases, chemicals, salt water or steam are present.• Do not use in an explosive atmosphere.• Do not expose to direct sunlight. Use a suitable protective cover.• Do not install in a location subject to vibration or impact in excess of the product’s specifications.• Do not operate in a location exposed to radiant heat that would result in temperatures in excess of the product’s specifications.3.3 PipingCaution• Before connecting piping be sure to clean up chips, cutting oil, dust etc. • When installing piping or fittings, ensure sealant material does not enter inside the port. When using seal tape, leave 1 thread exposed on the end of the pipe/fitting.• Tighten fittings to the specified tightening torque.3.4 LubricationCaution• SMC products have been lubricated for life at manufacture, and do not require lubrication in service.• If a lubricant is to be used in the system, refer to catalogue for details.4 Settings4.1 Initial SettingPerform initial setting when using for the first time and after changing the batteries, as the unit will display a memory data error.1. Confirmation of displayWhen power is applied, if there is nothing on the display, proceed to step 2.If “Err” Is displayed on the LCD, switch the power OFF and ON again. The display should clear. Proceed to step 2.2. Press and hold the POWER button for 6 seconds or more.The unit will move into the zero-clear mode. When this happens “CAL” will be displayed.3. Release the POWER button.When zero clear is finished, the unit will operate.4.2 Power ONPress the POWER button. The power will turn ON.When pressed and held for 6 seconds or more the unit will move into zero-clear mode.4.3 Power OFFPress and hold the POWER button for 3 seconds or more.The power will turn OFF.The power will also turn OFF If there is no button operation for 5 minutes or more (auto power OFF function).4.4 Units Display Switching1. Press and hold the POWER and LIGHTbuttons for 3 seconds or more.The units on the LCD display will flash.2. Press the LIGHT buttonThe units will change (refer to the units table).3. Press the POWER buttonThe units are set and the units display setting is complete.(For products with units switching function).Units availableHigh pressure (PPA100) Vacuum pressure(PPA101) Low pressure (PPA102) MPa > bar > psi > kgfkPa > bar > psi > inHg > mmHgkPa > bar > psi > kgf4.5 Peak / Bottom displayPress the POWER button. • For Peak displayTo display the maximum pressure value, with “P” displayed on the LCD. The display will change if the pressure exceeds the pressure being held.Press the POWER button. • For Bottom displayTo display the minimum pressure value, with “b” displayed on the LCD. The display will change if the pressure falls below the pressure being held. Press the POWER to complete the setting.Since this function is combined with the power OFF operation, the button should be released when the “P” or “b” is displayed.4.6 Auto Power OFF functionThe power is turned OFF when there has been no button operation for 5 minutes.(To cancel this function refer to the lock mode function below).4.7 Lock mode functionPress and hold the POWER and LIGHT buttons for 6 seconds or more.The lock mode is activated and the auto power OFF function is cancelled.“L” is displayed on the LCD display.When the power is turned OFF the lock mode is released.4.8 Turning ON the BacklightPress the LIGHT button.The display lights up when the button is pressed. In lock mode it lights up when pressed and turns OFF when pressed again.However the maximum lighting time is approximately one minute.4.9 Zero clear functionPress the POWER button for 6 seconds or more.The zero displayed at atmospheric pressure can be automatically adjusted.This means it is possible to eliminate a display discrepancy at atmospheric pressure. 1. Turn the power OFF.2. Release the supply pressure to atmosphere.3. When the POWER button is pressed and held for 6 seconds or more the zero clear function is performed and “CAL” is displayed on the LCD.ORIGINAL INSTRUCTIONSRefer to the operation manual or catalogue on the SMC website (URL: https:// ) for the How to Order information.Refer to the operation manual or catalogue on the SMC website (URL: https:// ) for outline dimensions.7.1 General maintenanceCaution•Not following proper maintenance procedures could cause the productto malfunction and lead to equipment damage.• If handled improperly, compressed air can be dangerous.Maintenance of pneumatic systems should be performed only by qualified personnel.• Before performing maintenance, turn off the power supply and be sure to cut off the supply pressure. Confirm that the air is released to atmosphere.• After installation and maintenance, apply operating pressure and power to the equipment and perform appropriate functional and leakage tests to make sure the equipment is installed correctly.• If any electrical connections are disturbed during maintenance, ensure they are reconnected correctly and safety checks are carried out as required to ensure continued compliance with applicable national regulations.• Do not make any modification to the product.• Do not disassemble the product, unless required by installation or maintenance instructions. 7.2 Span calibrationWarning• Do not touch the span calibration trimmer except when performing a span calibration.1. Perform zero clear at atmospheric pressure.2. Apply the maximum rated pressure and calibrate the span while comparing with a standard pressure gauge.3. If the displayed value of the compact manometer is “0” after returning to atmospheric pressure, then calibration is complete. If the displayed value is not “0” calibrate again by repeating steps 1 and 2.7.3 Replacing the batteriesWhen the battery voltage becomes low the entire LCD display will flash. When the LCD is flashing, replace the batteries. Use 2 x AA dry cell batteries.Caution• To replace the batteries, turn OFF the power and replace them within approximately 30 seconds.• If not completed within 30 seconds “Err” will be displayed. • In that case perform zero clear once again.• In the event that the display runs out of control, remove the batteries for one minute or longer and then perform zero clear again before inserting the batteries and turning ON the power.8.1 Limited warranty and disclaimer/compliance requirements Refer to Handling Precautions for SMC Products.This product shall not be disposed of as municipal waste. Check your local regulations and guidelines to dispose of this product correctly, in order to reduce the impact on human health and the environment.10 ContactsRefer to or www.smc.eu for your local distributor / importer.URL: https:// (Global) https://www.smc.eu (Europe) SMC Corporation, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, Japan Specifications are subject to change without prior notice from the manufacturer. © 2021 SMC Corporation All Rights Reserved. Template DKP50047-F-085M。

P10铝质户外表贴三合一全彩显示屏技术参数

防护等级
Protection class
IP65级/ level
系统防护
System defenses
防潮、防尘、防高温、防腐蚀、防燃烧、防静电、抗震动、抗雷击
Anti Moisture, anti-dust, anti-high temperature, anti-corrosion, anti-burning, anti-static, anti-vibration, anti-lightning
密度（点/㎡）
Density（Dots/㎡）
10000
点间距
Pixel pitch
10 mm
单元板解析度
Cabinet pixels
16*16
模组尺寸（L * H * W）
Size of module
160*160*18
箱体分辨率
48*64
箱体材质
铝质
标准箱体重量
Standard cabinet weight
整屏失控点
Malfunction dot of whole display
新屏无失控点
New screen out of control point
工作电压
Working voltage
AC220V±15％
寿命
Lifespan
≥8万小时/ 80,000 hours
环境要求
Circumstance
-30℃-+60℃/90%RH
P10铝质户外表贴三合一全彩显示屏技术参数
项目ProjectP10（三合一）P10(10in1）密度（点/㎡）Density（Dots/㎡）10000点间距Pixelpitch10mm单元板解析度Cabinetpixels16*16模组尺寸...

p4技术参数

1. 适用范围本技术手册仅适用于室内P4.0（64*32）十六扫全彩表贴三合一单元板。

2. 产品说明8.1. 室内P4.0十六扫全彩表贴三合一单元板主要是由红色LED晶片、绿色LED晶片和蓝色LED晶片封装为一个像素点后组成矩阵，再固定到塑胶套件上而成；8.2. 此单元板含有驱动芯片和输入缓冲芯片，连接到LED显示屏控制系统即可显示视频、图像和文字信息等；8.3. 通过PWM信号驱动红色LED、绿色LED和蓝色LED的驱动芯片，可形成16,777,216种颜色变换；8.4. 此单元板可以按水平和垂直方向任意拼接，从而拼成不同大小的显示屏；8.5. 单元板的特点：●用超高亮的LED和优质的塑胶件●高对比度可达到良好的显示效果●重量轻易于安装、拆卸●可进行单点、单灯维护，成本低●采用恒流方式驱动LED，发光均匀，功耗低●像素间距为4.0mm，共有64*32个像素点，每个像素点由1R1G1B组成8.6. 单元板图片正视图背视图3. 产品参数（温度条件：Ta=25℃）4. 信号引脚定义HUB75-A5. 规格型号说明产品型号命名规范：6. IC贴片图元器件贴片位置元器件贴片位置74HC245PW U1-U3 74H138 U4-U5JXI5020GP UR1-UR8、UG1-UG8、UB1-UB8 74HC123 U64953 T1-T16 电容104 C1-C31排阻560，56ΩRP1-RP32 贴片电解电容CA1-CA3 贴片电源座5569-4P S1 贴片简易牛角座JIN、JOUT 电阻680R，680ΩRR1-RR8、RG1-RG8、RB1-RB8 电阻1003，100KΩR1备注：VRR、VRG、VRG为可调电阻。

7. 安装孔位图备注：所有尺寸的单位为mm；如无特殊说明，外形公差为±0.2，孔径公差为±0.1。

打印服务器说明书适用型号

打印服务器说明书适用型号LP-1008MFP/LP-2008MFP安装准备工作 (2)设置IP地址 (4)控制中心添加打印机方式 (6)扫描仪使用介绍 (9)TCP/IP添加打印机方式 (11)【声明】感谢您选择隆豹产品。

在第一次安装和使用本产品之前，请您务必仔细阅读本说明书及随机配送的所有资料，特别是安全注意事项部分，并按照本说明书的说明及要求安装、使用和维护保养本产品，以避免因不正确的安装、使用和维护保养可能导致的产品损坏或其他问题。

【限制说明】我们已经对本说明书进行了严格仔细的校勘和核对，但不能保证本说明书完全没有任何错误和疏漏。

本说明书中的图片仅供参考，如果有个别图片与产品的实际显示不符，请以实际产品为准。

产品的实际配置及规格，应以适用于本产品的配置和规格描述文件（如装箱单等）为准。

本说明书中提及的某些部件、组件、功能和特征仅用于说明目的，可能仅适用于某些特定规格和型号的产品，而非对本产品实际配置和规格的描述，请您阅读本说明书时认明。

我们保留随时对本说明书描述的产品和/ 或软件程序进行改进和/ 或修改的权利，如有此类改进和/ 或修改，相应的产品说明书也会随之调整，恕不另行通知。

请您务必妥善保管和随时备份您的数据资料（如果适用的话）。

对于因本产品使用、不能使用、维修或者其他情况引起的数据资料丢失和损坏，以及由此造成的其他损失，在法律允许的最大范围内，我们不承担责任。

【联络方式】上海隆豹信息科技有限公司技术客户支持电话：官方网站:联系地址：500号五层A220室产品简介INTRODUCTIONLP-1008打印服务器用于连接USB打印机，将非网络打印机升级为网络打印机可以使多个用户电脑共享此打印机（如有扫描功能，也可多用户使用）。

打印服务器管理软件可以查看连接打印机的计算机名，便于设置，连接，管理，在不同电脑间可以自动连接切换，可以对打印任务自动排队，建议使用者电脑数量为100台以内。

LP-1008兼容Windows操作系统, 提供控制端安装方式及IP添加本地打印机两种安装方式，用户可根据打印机的支持类型来选择安装方式，设置简便易用。

人民电器三相组合式金属氧化物避雷器(TBP) 产品说明书

概述电力系统由于开断容性或感性负载、三相非同期合闸等原因会引起相间或相对地间的操作过电压。

常规的避雷器只对相与地之间的过电压加以限制，但对相间过电压并不起作用。

通过实地测量和计算机模似计算，相间操作过电压的幅值远大干相地间，其最高幅值可达7倍相电压。

因此交流复合外套三相组合式避雷器(简称TBP)是专门用于35kV 及以下电力系统中，保护变压器、开关、母线、电动机、并联补偿电容器等电气设备的新产品，除限制相一地间的过电压，还可限制相间瞬态过电压，使得保护性能更加完善，极大地提高了被保护设备的安全水平，是常规避雷器的理想换代产品。

广泛应用于电力、冶金、石化、矿山、建筑、环保等领域的电气设备保护。

三相组合式过电压保护器原理见图，采用硅橡胶复合外套整体模压一次成型，引出线采用硅橡胶高压电缆，安装时无须考虑相间距离和对地距离，只需将标有接地符号单元的电缆接地外，其余分别接A 、B 、C 三相即可。

标准电缆长度500mm 。

产品型号及含义特征数字设计序号使用场所结构特征标称放电电流产品型式三相组合式金属氧化物避雷器(TBP )工作原理图ABCEN高压电器165166三相组合式避雷器是针对常用避雷器的弱点设计的一种新产品，是有四组金属氧化物电阻片组成，具有其它同类产品不可比拟的特点和优点。

本产品选用阻燃、耐老化的硅橡胶做外壳材料，从内部引出四根硅橡胶高压电缆和电阻片整体一次模压硫化成型、故其电气绝缘性能好、介电强度高、抗电蚀、耐老化，而且体积小、安装方便，可根据现场情况灵活安装。

性能及优点订货时请注明以下内容：1、产品名称及型号、使用场所，如有特殊要求，请标明技术参数和具体要求。

2、若用户对安装尺寸、电缆长度、接线端子孔径有特殊要求，请注明。

3、组合式避雷器系列产品分户内、户外两种，供用户选用。

订货须知本产品可以装在各种不同型号的KYN 、CBC 、JYN 、GZSI 、XCN 等35kV 以下高压开关柜内和其它场所。

BNS 260 生活用电器安全设备手册说明书

DataOrdering dataProduct type descriptionBNS 260-11/01ZG-R Article number (order number)101184376EAN (European Article Number)4030661321745eCl@ss number, Version 9.027-27-24-02CertificationsCertificates DGUVTÜVcULus EACGeneral dataProduct nameBNS 260StandardsIEC 60947-5-3 BG-GS-ET-14 Installation conditions(mechanical)quasi-flush Enclosure materialGlass-fibre, reinforced thermoplastic Gross weight 60 g General data - FeaturesCoding Yes BNS260-11/01ZG-RLong lifeSmall bodyPre-wired cableno mechanical wear26 mm x 36 mm x 13 mmInsensitive to soilingThermoplastic enclosure Concealed mounting possible Insensitive to transverse misalignmentIntegral System Diagnostics,YesstatusNumber of openers2Number of shutters1Number of safety contacts2Number of cable wires6Safety appraisalStandards ISO 13849-1Mission Time20 Year(s)Safety appraisal - Safety outputsB10d- Value Normally-closed25,000,000 Operationscontact/Normally open contact(NC/NO)Mechanical dataActuating element MagnetDoor hinge RightEnsured switch distance "ON" S5 mmaoEnsured switch distance "OFF" S15 mmarAxial misalignment, a horizontal and vertical misalignment of the safetysensor and the actuator are tolerated. The possible misalignment dependson the distance of the active surfaces of the sensor and the actuator. Thesensor remains active within the tolerance range.Direction of motion Head-on to the active surfaceMechanical data - Connection techniqueTerminal Connector CableLength of cable 1 mWire cross-section0.25 mm2Material of the Cable mantle PVCMechanical data - DimensionsHeight of sensor36 mmLength of sensor13 mmWidth of sensor26 mmAmbient conditionsProtection class IP67Ambient temperature, minimum-25 °CAmbient temperature, maximum+70 °CStorage and transporttemperature, minimum-25 °CStorage and transporttemperature, maximum+70 °CResistance to vibrations to EN60068-2-610 … 55 Hz, amplitude 1 mmRestistance to shock30 g / 11 msElectrical dataVoltage type DC (direct current)Switching voltage, maximum24 VDCSwitching current, maximum0.01 ASwitching capacity, maximum0.24 WSwitching frequency, maximum 5 HzStatus indicationNote (Integral SystemDiagnostics, status )The LED is illuminated when the guard is closed. Scope of deliveryIncluded in delivery Actuators must be ordered separately. AccessoryRecommendation (actuator)BPS 260SRB-E-301STSRB-E-201LCNotesNote (General)Contact symbols shown for the closed condition of the guard device. The contact configuration for versions with or without LED is identical.Circuit exampleNote (Wiring diagram)Contact S21-S22; S13-S14 must be integrated in the safety circuit. Ordering codeProduct type description:BNS 260-(1)(2)Z(3)-(4)-(5)(1)11 1 NO contacts/1 NC contact02 2 NC contact(2)without with diagnostic output/01 1 NC contact(3)without without LED switching conditions displayG with LED switching conditions display(4)without Pre-wired cableST with connector(5)L Door hinge on left-hand sideR Door hinge on right-hand sidePicturesProduct picture (catalogue individual photo)ID: kbns2f23| 314,7 kB | .jpg | 352.778 x 246.239 mm - 1000 x 698Pixel - 72 dpi| 25,0 kB | .png | 74.083 x 51.858 mm - 210 x 147Pixel - 72 dpi| 39,7 kB | .jpg | 27.093 x 18.881 mm - 320 x 223 Pixel- 300 dpiDimensional drawing basic componentID: kbns2g05| 131,1 kB | .jpg | 352.425 x 417.336 mm - 999 x 1183Pixel - 72 dpi| 4,5 kB | .png | 73.731 x 87.489 mm - 209 x 248 Pixel- 72 dpi| 34,5 kB | .jpg | 112.536 x 133.35 mm - 319 x 378Pixel - 72 dpi| 37,3 kB | .cdr |DiagramID: kbns2k04| 25,1 kB | .jpg | 112.889 x 27.164 mm - 320 x 77 Pixel- 72 dpi| 19,5 kB | .cdr |Characteristic curveID: kbns2d03| 36,8 kB | .cdr || 40,4 kB | .jpg | 112.889 x 74.789 mm - 320 x 212Pixel - 72 dpi| 18,5 kB | .png | 74.083 x 49.036 mm - 210 x 139Pixel - 72 dpiCharacteristic curveID: kbns2d02| 19,2 kB | .png | 74.083 x 49.389 mm - 210 x 140Pixel - 72 dpi| 40,8 kB | .jpg | 112.889 x 75.142 mm - 320 x 213Pixel - 72 dpi| 36,3 kB | .cdr |Clipart| 20,1 kB | .cdr || 1,7 kB | .png | 74.083 x 52.564 mm - 210 x 149 Pixel- 72 dpiK.A. Schmersal GmbH & Co. KG, Möddinghofe 3, D-42279 WuppertalThe details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.Generated on 08.07.2020 19:14:08。

多功能旅行包包详细尺寸和重量信息说明书

•
•
•
•
Padlቤተ መጻሕፍቲ ባይዱckable
TSA
TSA
TSA
TSA
•
•
•
2
2
2*
2*
4 double spinner
2*
- IP67 (corrosion, sand and dust proof & water tight**)
- Shock Proof - Temperature rating
from -33 to 90°C
2-in-1 camera roller bag and backpack
International /Strictest Carry On
International carry-on
Strictest carry-on
International carry-on
Strictest carry-on
- IP67 (corrosion, sand and dust proof & water tight**)
- Shock Proof - Temperature rating
from -33 to 90°C
2 integrated
*Spare part available. MB ZZ-PL-050 2 Wheels plus 2 screws kit. ** Temporary immersion in water: the test is made by completely immersing the case in 1 meter water, for 30 minutes.
International carry-on
International carry-on

YP-01191113 产品说明书

Instruction ManualCONTENTSImportant Safety Instructions (2)1. Product Description (3)1.1 Main Features (3)1.2 Front Panel (3)1.3 Rear Panel (4)1.3 Supported Mounting Ways (5)2. Menu Setting (6)2.1 Shortcut Button (6)2.1.1 Menu/▷/◁ Button (6)2.1.2 FN Button (6)2.2 Menu Operation (7)2.2.1 PICTURE (7)2.2.2 MARKER (8)2.2.3 FUNCTION (9)2.2.4 VGA (10)2.2.5 AUDIO (11)2.2.6 SYSTEM (12)3. Parameters (14)4. Accessories (15)5. Trouble Shooting (16)YP-01191113Important Safety Instructions:The device has been tested for conformance to safetyregulations and requirements, and has been certified forinternational use. However, like all electronic equipment, thedevice should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.●Please do not place the display screen towards the ground to avoidscratching the LCD surface.●Please avoid heavy impact.●Please do not use chemical solutions to clean this product. Simply wipewith a clean soft cloth to maintain the brightness of the surface.●Please do not block any vent hole.●Please follow the instructions and trouble-shooting to adjust the product.Internal adjustments or repairs must be performed by a qualified technician.●Please keep user guide for future reference.●Please unplug the power if long-term no-use, or thunder weather.1. Product Description1.1 Main Features● HDMI 1.4 supporting 4K 30Hz● 1000cd/m² high brightness● 1920X1080 high resolution● Support multiple video input interfaces: SDI, HDMI, VGA, AV● Support FN shortcut button● HDR supporting HDR10_300, HDR10_1000, HDR10_10000, HLG1.2 Front Panel1) Power Light (Red/Green)2) Power Button3) EXIT/FN Button:●EXIT Button●FN Button, can be set by [Menu]-[System]-[FN Conf.].Default: Aspect.4) ▷Button: Press it to increase volume when power on; Select options downward in the menu.5) ◁Button: Press it to decrease volume when power on; Select options upward in the menu.6) MENU Button: Press it to display the menu on the screen when power on. Press it to confirm the option selected.7) INPUT Button: Switch among of AV, VGA, HDMI and SDI signals.1.3 Rear Panel1) SDI input2) SDI output3) USB 2.0 (for upgrade)4) HDMI 1.4 input5) VGA input6) AV(3.5mm) input7) Earphone input(3.5mm)8) Power input: DC 12V9) Speaker×21.4 Supported Mounting Ways●DesktopStanding on the table by installing the desktop bracket on the bottom of the monitor.●Wall mountInstalled and fixed on the standard VESA bracket through VESA 75mm holes on its rear panel.●Carry-onTaken away at any time by the portable aluminum case.●6U RackmountSupporting a 6U rack mounting way.2. Menu SettingBefore setting the functions, please make sure the device is connected correctly.2.1 Shortcut Button2.1.1 MENU/▷/◁ Button●Press MENU button, the menu will pop up on the screen. Then select itemas the following sequences via pressing ▷/◁ button: PICTURE / MARKER / FUCTION / VGA / AUDIO / SYSTEM. Press MENU button again to enter into the item you select.●Press ▷/◁button to adjust options or values in the selected item. Thenpress MENU or EXIT button to apply and save the setting.●When Menu is inactivated, press ▷/◁ button to adjust volume. Then selectitem as the following sequences via pressing MENU button: Brightness / Contrast / Saturation / Tint / Sharpness and Exit. Press ▷/◁ button again to adjust the value in the selected item.2.1.2 FN ButtonPress Menu button, select [System]-[FN Conf.] to set the FN button function. User can set the FN button function: Center Marker / Display Scan / Scan / Aspect / Freeze / HDR / Image Flip. Default: Aspect.2.2 Menu Operation2.2.1 PICTURE● BrightnessAdjust the brightness of the LCD Screen, adjustable range: 0-100. ● ContrastAdjust the contrast of image, adjustable range: 0-100. ● SaturationAdjust the saturation, adjustable range: 0-100.ITEMS OPTIONSBrightness 0-100 Contrast 0-100 Saturation 0-100 Tint 0-100 Sharpness 0-100HDR Off / HDR10_300/ HDR10_1000 / HDR10_10000/HLG Color Temperature6500K / 7500K / 9300K / User Red Gain 0-255 Note: Only available when under [User] mode to adjust R/G/B gain and offset. Green Gain 0-255 Blue Gain 0-255 Red Offset0-511Green Offset 0-511 Blue Offset0-511●TintAdjust the hue of the image, adjustable range: 0-100.●SharpnessAdjust the sharpness of image, adjustable range: 0-100.●HDROptions: Off / HDR10_300 / HDR10_1000 / HDR10_10000 / HLG.Note: Only available under SDI and HDMI mode.●Color TemperatureOptions: 6500K /7500K / 9300K / User. The standard color temperature is 6500K.Note: Only available when under [User] mode to adjust R/G/B gain and offset.2.2.2 MARKERITEMS OPTIONSCenter Marker Off/OnSafety Marker Off / 95% / 93% / 90% / 88% / 85% / 80%●Center MarkerOptions: Off/On. When [On], the screen will display “+” Symbol.●Safety MarkerOptions: Off / 95% / 93% / 90% / 88% / 85% / 80%.2.2.3 FUNCTION● ScanOptions: Aspect / Pixel To Pixel / Zoom.Note: Under [Pixel To Pixel] mode, Aspect, Display scan and Zoom cannotbe adjusted. Under [Zoom] mode, Aspect cannot be adjusted.● AspectOptions: Full / 1.85:1 / 2.35:1 / 4:3 / 3:2.Note: Only available under [Scan]-[Aspect] mode. ● Display scanOptions: Fullscan / Overscan / Underscan. ● ZoomOnly available under [Scan]-[Zoom] mode. Users can select zoom ratioITEMS OPTIONSScan Aspect / Pixel To Pixel / Zoom AspectFull / 1.85:1 / 2.35:1 / 4:3 / 3:2Only available under [Scan]-[Aspect] modeDisplay scanFullscan / Overscan / UnderscanOnly available under [Scan]-[Aspect] and[Zoom] modeZoomX1.5 / X2 / X3 / X4Only available under [Scan]-[Zoom] modeFreeze Off / Onaccording to different needs.●FreezeOptions: On / Off.Activate freeze function to freeze current picture when playing the video. 2.2.4 VGAITEMS OPTIONAuto On / OffPhase 0-100Clock 0-100H-Position 0-100V-Position 0-100●AutoSelect [On], the monitor can automatically adjust the position of the image.Select [Off], users can manually adjust the position of the image.●PhaseAdjust internal phase sequence difference. Adjustable range: 0-100.●ClockAdjust internal oscillation frequency when interference occurs. Adjust this item, the image can be compressed or stretched left or right. Adjustable range: 0-100.●H-PositionHorizontally adjust the position of the image on the screen. Adjustable range: 0-100.●V-PositionVertically adjust the position of the image on the screen. Adjustable range: 0-100.Note: Only available under VGA mode.2.2.5 AUDIOHDMI, VGA, AV Mode SDI ModeITEMS OPTIONVolume 0-100Audio Channel CH0&1 / CH2&3 / CH4&5 / CH6&7 / CH8&9 /CH10&11 / CH12&13 / CH14&15●VolumeAdjust the volume of built-in speaker or earphone. Adjustable range: 0-100.●Audio ChannelOptions: CH0&1 / CH2&3 / CH4&5 / CH6&7 / CH8&9 / CH10&11 /CH12&13 / CH14&15.Note: Only available under SDI mode.2.2.6 SYSTEMITEMS OPTIONLanguage English / 中文OSD Timer 10s / 20s / 30sOSD Trans. Off / Low / Middle / HighImage Flip Off / H / V / H&VBack Light 0-100FN Conf. Center Marker / Display Scan / Scan / Aspect /Freeze / HDR / Image FlipReset Off / On●LanguageOptions: English/中文.●OSD TimerOptions: 10s / 20s / 30s.●OSD Trans.Adjust the transparency of OSD. Options: Off / Low / Middle / High.●Image FlipOptions: Off / H / V / H&V.●Back LightAdjustable range: 0-100.●FN Conf.Set shortcut button function, options: Center Marker / Display scan / Scan / Aspect / Freeze / HDR / Image Flip.●ResetIf there is any problem unknown, please select [On]. The monitor will restore factory defaults.3. Parameters4. Accessories●Standard1)12V/3A DC Adapter 1 piece2) HDMI A/A cable 1 piece3) VGA cable 1 piece4) AV cable 1 piece5) Rackmount bracket 1 piece6) Desktop bracket 1 pair7) Manual 1 piece●Optional:8) Protection bracket 1 pair9) Aluminum case 1 piece5. Trouble Shooting●Only black-and-white display:Check whether the color saturation is properly setup or not.●Power on but no pictures:Check whether the cables of AV, HDMI, SDI, and VGA are correctly connected or not. Please use the standard power adapter coming with the product package. Improper power input may cause damage.●Wrong or abnormal colors:Check whether the cables are correctly and securely connected or not.Broken or loose pins of the cables may cause a bad contact.●Other problems:Please press MENU button, choose [SYSTEM]→ [Reset]→[On].Note: Due to constant effort to improve products and product features, specifications may change without notice.。

6661TX-XXX-C-ZH

操作手册
内容：操作、安装和维护保养
1-1/2英寸隔膜泵
1:1 比例（非金属）
6661TX-X-C
发布日期： 1-29-93
修订：
5-12-10
(修订版本：R)
在安装、操作或维修该设备之前, 请仔细阅读本手册。
雇主有责任向操作人员提供本手册，请保留本手册以备将来参考。
维修服务包
参看型号说明表，以便与泵材选项匹配。 637118-C 用于空气段修理 (参看第6页)。 637165-XX用于流体段修理 (参看第4页)。
(800) 276-4658 y FAX (800) 266-7016

© 2010
CCN 15267206
操作和安全预防措施
阅读、理解并遵照此处信息操作，以避免出现伤害或财产损失。
过高的空气压力静电火花
危险物料危险压力
警告过高的空气压力。可能造成泵的损坏、人身伤害或财产损失。 y 切勿超过泵体铭牌上说明的最大进气口压力。 y 确保物料软管和其他零部件能够承受由该泵产生的压力。检查所有软管进行，是否有损坏或磨损。确保分配
警告切记注意
= 危险或不安全的作业，可能会造成严重的人身伤害、死亡或重大财产损失。
= 危险或不安全的作业，可能会造成较轻的人身伤害、产品或财产损失。
= 重要的安装、操作和维护保养信息。
第 2 页，共 8 页
6661TX-X-C (zh) Nhomakorabea一般说明
在空气压力很低时，ARO隔膜泵甚至也能泵送大量物料，而且物料相容性的选择范围很广。请参看型号和选项表。 ARO隔膜泵具有抗失速设计和空气马达/流体段模块化的特点。气动双隔膜泵利用气室中的压差，交替造成流体室内的吸入压力和流体正压力，同时球形单向阀确保流体正流量。当施加空气压力时，泵的循环开始，它会连续泵送物料不断满足需求。循环将建立并维持管路压力，一旦达到最高管路压力（分配装置关闭），循环停止，并根据需要，重新进行泵送。。

菲尼克斯二合一三合一电涌保护器产品说明书

公司通知
Notice / Information
市场部 2010 第（021 ）号
Subject : 二合一、三合一电涌保护器正式供货
为了完善产品系列，更好的贴近中国市场，TRABTECH 监控系统用二合一、三合一电涌保护器从2010年6月30日开始正式供货。

1、产品描述
▪ 交/直流供电监控摄像机电涌保护器
▪ 三个最大持续工作电压等级供选择：24V 、220V 、
320V ▪ 多功能一体化电涌保护器，可同时保护摄像机的电
源、视频、和控制回路 ▪ 有二合一、三合一两种系列产品供选择 ▪ 带状态指示灯 2、产品的命名原则
3、安装方式
4、产品技术参数
BXT - CVP - 24VAC BXT - VP - 24VAC
三合一监控系统防雷器
BOXTRAB 系列电涌保护器
V-Video 表示视频线路保护 P-power 表示电源线路保护
二合一监控系统防雷器
5、产品尺寸图
如需获得该产品的更多信息请与防雷项目部Ms.胡倩（8367）或Ms.景婷（8307）联系
市场部 2010-07-08。

水射器 10KG

ＰＶＣ水射器（１０　ｋｇ／ｈ）带止回隔膜５４５－０５１８，５４５－１５１９５４５－３５１８，５４５－４５１９操作和维护手册仔细阅读并保存本手册！由不正确操作所造成的损坏不在保修范围之内。

2.5/545-10-B00/01.96C1目录１．　概述．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．４１．１　文档结构．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．４１．２　手册使用．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．４１．３　质保条款．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．４２．　安全指导．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．５２．１产品应用．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．５２．２操作管理的职责．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．５３．　技术参数．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．６３．１　选型表．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．６３．２　连接数据和尺寸图．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．７４．　安装．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．８４．１　运输和储存．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．８４．２　开箱．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．８４．３　安装．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．８４．３．１　安装条件．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．８４．３．２　水射器的安装．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．８５．　调试．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．９５．１　调试前的准备．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．９５．２　调试前的检查．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．９５．２．１　气体溶液管线的检查．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．９５．２．２　检查水射器的止回隔膜．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１０５．２．３　检查水射器的功能．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１０６．　操作．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１１６．１　产品描述．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１１６．１．１功能．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１１６．１．２零部件．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１１６．２　操作．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１２６．３　可能出现的故障．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１２７．　维护．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１３７．１　清洗和维护的频率．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１３７．２　喷嘴的清洁．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１３７．３　止回隔膜．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１４７．３．１　检查内部结构．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１４７．３．２　更换活塞．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１４７．３．３　更换隔膜和座套．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１５７．３．４　检查弹簧．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１５７．３．５　组装止回隔膜．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１６８．　备件和附件．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１７８．１备件包．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１７８．２安装附件．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１７2.5/545-10-B00/01.96C37.3.5安装止回隔膜●将整个隔膜盘（１７０）（带隔膜、座套、螺纹件和O形圈等）推到活塞上警示注意安装的位置!●转动隔膜盘，使孔与上部的钻孔对齐●放上弹簧●装上上面部分●对称地拧紧螺栓●检查结构密封性-如果漏水：•稍稍紧一下隔膜环•重复操作，直到不再漏水．2.5/545-10-B00/01.96C 162.5/545-10-B00/01.96C 52. 安全指导警告在使用前，请仔细参阅ALLDOS 的《用氯工厂的功能和安全知识手册》。

Eaton Moeller EASY I O 扩展设备产品说明书

Eaton 197224Eaton Moeller® series EASY I/O expansion, For use with easyE4, 24 V DC, Inputs expansion (number) analog: 4, screw terminal EASY-E4-DC-4PE1Spécifications généralesEaton Moeller® series EASY I/O expansion197224401508089285458 mm 90 mm 36 mm 0.1 kg IEC/EN 61000-6-3 IEC 60068-2-30 CULus per UL 61010 IEC/EN 61131-2 IEC 60068-2-6 IEC 60068-2-27 IEC/EN 61000-6-2 EN 61010 EN 50178CSA-C22.2 No. 61010 IEC 60664 IEC/EN 61000-4-2 UL ListedUL Category Control No.: NRAQ, NRAQ7UL File No.: E205091 DNV GL CEEASY-E4-DC-4PE1Product NameCatalog Number EANProduct Length/Depth Product Height Product Width Product Weight Certifications Model CodeAdditional measurement aids: Filtering (software), smoothing of analog input signal (PT1 behavior), only with set sampling time, selectable per sensor: yesExpandableExpansion deviceMeasuring principle: Two or three wire per sensor, selectable by connection of sensorCard diagnosticDiagnostics below lower measurement range IP20According to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201Rail mounting possibleTop-hat rail fixing (according to IEC/EN 60715, 35 mm)Wall mounting/direct mountingScrew fixing using fixing brackets ZB4-101-GF1 (accessories) Front build in possibleIII2Control relays easyE4TCP/IPMODBUS≤ 5 %12 Bit (0- 4095, digital, scaling per sensor)EASYSOFT-SWLIC/easySoft7easyE4 extensionDC50 mm Drop height, Drop to IEC/EN 60068-2-31 0.3 m 795 - 1080 hPa (operation) -25 °CFeatures Functions Degree of protection Insulation resistance Mounting methodOvervoltage category Pollution degree Product category ProtocolResidual ripple ResolutionSoftwareTypeVoltage typeDrop and toppleHeight of fall (IEC/EN 60068-2-32) - max Air pressureAmbient operating temperature - minHorizontalVertical15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 18 Impacts57 - 150 Hz, 2 g constant acceleration10 - 57 Hz, 0.15 mm constant amplitudeAccording to IEC/EN 60068-2-655 °C-40 °C70 °CCondensation: prevent with appropriate measuresClearance in air and creepage distances according to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-2015 - 95 % (IEC 60068-2-30, IEC 60068-2-78)8 kV2 kV, Signal cableAccording to IEC/EN 61000-4-42 kV, Supply cable6 kV10 V/m at 0.8 - 1.0 GHz (according to IEC EN 61000-4-3)1 V/m at 2.0 - 2.7 GHz (according to IEC EN 61000-4-3)3 V/m at 1.4 - 2 GHz (according to IEC EN 61000-4-3)10 V (according to IEC/EN 61000-4-6)Class B (EN 61000-6-3)According to IEC/EN 61000-4-5, power pulses (Surge), EMC 0.5 kV, Supply cables, symmetrical, EASY…DC, power pulses (Surge), EMC1 kV, Supply cables, asymmetrical, power pulses (Surge), EMC20 ms≤ 10 ms, Bridging voltage dips 0.2 - 2.5 mm² (22 - 12 AWG), flexible with ferrule 0.2 - 4 mm² (AWG 22 - 12), solid3.5 x 0.8 mm, Terminal screw0.6 Nm, Screw terminals3.4 W (at 24 V DC)12.5 A (for 6 ms)1 W1 W24 V DC (-15 %/+ 20 % - power supply)20.4 - 28.8 V DC0 VACMounting position Shock resistance Vibration resistance Ambient operating temperature - max Ambient storage temperature - min Ambient storage temperature - max Environmental conditionsRelative humidityAir dischargeBurst impulseContact dischargeElectromagnetic fieldsImmunity to line-conducted interference Radio interference classSurge ratingVoltage dips Terminal capacityScrewdriver sizeTightening torqueHeat dissipationInrush currentPower consumptionPower lossRated operational voltage Supply voltage at AC, 50 Hz - min0 VAC20.4 VDC28.8 VDC≥ 1A (T), Fuse, Power supplyScrew terminal≤ 30 m, unscreened, Analog inputs temperature resistance Pt100 or Ni1000 sensors Input type resistance sensor: Platinum sensor Pt100 (according to DIN EN 60751, IEC 751)Input type resistance sensor: Nickel sensor Ni1000 (according to DIN 43760)40 mA4NoneBetween Analog inputs PT100 or Ni1000 and Power supply: no Between Analog inputs PT100 or Ni1000 and expansion units: yesBetween Analog inputs PT100 or Ni1000 and Inputs: noYes, for supply voltage (Siemens MPI optional)0 W 0 W 0 W 0 ASupply voltage at AC, 50 Hz - maxSupply voltage at DC - minSupply voltage at DC - maxShort-circuit protectionConnection typeCable length InputInput currentNumber of inputs (analog)Number of inputs (digital)Number of outputs (analog)Number of outputs (digital)Explosion safety category for gas Potential isolationProtection against polarity reversal Equipment heat dissipation, current-dependent PvidHeat dissipation capacity PdissHeat dissipation per pole, current-dependent PvidRated operational current for specified heat dissipation (In) Static heat dissipation, non-current-dependent PvsNone1 WMeets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Explosion safety category for dust 10.2.2 Corrosion resistance10.2.3.1 Verification of thermal stability of enclosures 10.2.3.2 Verification of resistance of insulating materials to normal heat10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects10.2.4 Resistance to ultra-violet (UV) radiation 10.2.5 Lifting10.2.6 Mechanical impact10.2.7 Inscriptions10.3 Degree of protection of assemblies 10.4 Clearances and creepage distances 10.5 Protection against electric shock10.6 Incorporation of switching devices and components 10.7 Internal electrical circuits and connections 10.8 Connections for external conductors 10.9.2 Power-frequency electric strength 10.9.3 Impulse withstand voltageEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Tous droits réservés.Eaton is a registered trademark.All other trademarks are property of their respective owners./socialmediaIs the panel builder's responsibility.The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Is the panel builder's responsibility.Is the panel builder's responsibility.The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.DA-CE-ETN.EASY-E4-DC-4PE1DA-MN-h1430de MZ049014EN Video easy E4 control relay IL050021ZU DA-CS-dc_4pe1DA-CD-dc_4pe1TT-197224_EASY-E4-DC-4PE1-de_DE eaton-modular-plc-easy-i-o-expansion-dimensions-002.eps eaton-modular-plc-easy-i-o-expansion-3d-drawing-002.eps10.9.4 Testing of enclosures made of insulating material 10.10 Temperature rise10.11 Short-circuit rating10.12 Electromagnetic compatibility 10.13 Mechanical functioneCAD modelGuide utilisateur Installation videosInstructions d'installationmCAD model Notes de venteSchémas。

哈蒙德 X-66 与莱斯利销售套装说明书

FOR SALE.Fully restored HAMMOND X-66 Organ with Leslie.Hammond X-66 still in the workshopThis instrument is more than a basic Hammond X-66 console but is indeeda real piece of collection.It took about two years to fully restore this organ in order to restitue its original 'out of the box' conditions as available in the sixties.This X-66 organ is perfectly operating with its associated Leslie 145and is in mint condition.Description at a glance.External aspect : (see photos on next page)- the furniture has been refurbished entirely by a cabinetmaker, panels lacquered,including bench.- all metal tubes have been re-chromed- each key, tab and drawbar dismounted, cleaned and repolished- special effect panel (right side) repainted and renovated- pedal keyboard entirely dismounted, each pedal black repainted and renewed with new felts.Hammond(R) and Leslie(R) are registered trademarks of Suzuki Musical Instrument Manufacturing Co. Ltd.Identification :Hammond X-66 Console - S/N 0047 – Version 2Y ear of production : 1971Genuine Hammond certificate availableX-66 Upper part : upper and lower manuals, drawbars, tabsX-66 Bottom part : pedal keyboard and swell pedal.Hammond(R) and Leslie(R) are registered trademarks of Suzuki Musical Instrument Manufacturing Co. Ltd.Foreword : all technical information concerning the complete restoration and MIDI implemetation of this Hammond X-66 Console can be found on the website: , select 'Restoring the X-66' and 'MIDI on X-66'.Internal aspect :- each circuit has been entirely checked individually.- more than 600 electrolytic and tantalum capacitors replaced by professional gradequality- all old noisy transistors from early silicon generation replaced by recent substitutes minimizing so the residual noise- all Printed Circuit Boards (PCB's for short) of the Animation and Output sectionsredesigned and replaced with new components- the Power Supply Unit (PSU for short) entirely rebuilt, reinforced, all filter capacitors replaced by professional grade quality- all three scanners dismounted and cleaned, new belt- each key-contact and busbar dismounted and cleaned with alcohol and lubricatedadequately- replacement of all defective or damaged cables carrying AC Mains notably- all relays dismounted, cleaned and checked- capacitors of all Tibia filters measured and replaced whenever needed- Tabs switches cleaned and lubricated- all arpeggiator contacts dismounted and cleaned (very delicate operation)Additional features.- MIDI is implemented on the Upper Keyboard (Contact-to-Midi system CTM-64 from Doepfer GMBH) with four MIDI OUT DIN sockets allowing direct connection ofexternal MIDI expanders- MIDI octave selector installed on Upper keyboard (one octave lower, normal, oneoctave upper)- Swell pedal system (LDR system) replaced by LED and phototransistors in order to provide instantaneous response contrarily to original LDR system and DC voltage to drive external Voltage Controlled Amplifier (VCA) whenever needed.- Built-in VCA output preamp driven by phototransistors installed on the swell pedal- kick switch on swell pedal to control motor speeds of Leslie- new lighting system for pedal keyboard- four output sockets for connection of external audio mixer and power amplifier (Draw A, Draw B, Tabs and Reverb)- direct connection of Leslie 147 via XLR (unbalanced) with built-in Leslie boostercancelling any hum induced by connecting cable. If needed, possibility of connecting balanced audio signals (Leslie 122 f.i) by adding one input transformer.Hammond(R) and Leslie(R) are registered trademarks of Suzuki Musical Instrument Manufacturing Co. Ltd.- organ generator can be driven either via the original Top Octave Hammond ToneWheel Generator (TWG) synchronized by AC Mains frequency or via built-in X-Talgenerator providing better frequency stability and allowing operation so on both 50Hz or 60 Hz AC Mains frequency.- built-in output booster- stand-by power supply unit included with Solid State Relay (SSR) to improvereliability of the power switch and minimizing 'pop noise' at switching ON- Output receptacle modified in order to meet European safety regulations- Addition of protection fuses at PSU- Vibrato Driver Board redesigned with less noisy and more reliable Si transistors- Improved +28 Vdc voltage with stabilization circuit in the PSU to reduce residual hum level- Addition of +/- 24Vdc and +/- 30 Vdc stabilized voltage in PSU for built-in Lesliebooster and other preamp circuits.- Bass Vibrato PCB redesigned entirely with new components improving distortion(THD) and minimizing noise- Installation of new redesigned Scanner Recovery Preamps and Expression Preamps - Installation of new redesigned Console Output preamp to drive the four externalchannels (connection with TC-1277 cabinets)- Installation of VCA output (0Vdc to 10 Vdc) to drive external VCA module via swell pedal.- Leslie speed control unit designed to also drive external Leslie simulators such asNeo Ventilator. LED indicator when on Fast speed.Hammond(R) and Leslie(R) are registered trademarks of Suzuki Musical Instrument Manufacturing Co. Ltd.Original Hammond X-66 Specifications :Manuals : Two 61-note manuals – overhanging keys.Pedals : 25-note radiating pedalboard, detachable pedals covered with extruded aluminium. String Bass I, String Bass II and Pedal Vibrato tabs.Tonal Controls : - Orchestral bright wave voices at 16' and 8' (Tab voices): Diapason,Viole d'Orch., Trumpet, English Post Horn, Kinura + three tabs forOrch.FF, Orch.16' and Unison OFF.- Accompaniment bright wave voices at 8' (Tab voices): Diapason, Violada Gamba, Tuba Sonora, + two tabs for Tremulant and Accomp.FF.- Orchestral manual: nine preset keys and two sets of eleven adjustableharmonic drawbars.- Accompaniment manual: nine presets and two sets of ten adjustableharmonic drawbars.- Pedal keyboard : five drawbars for pedal voices: two 16' and 8'composite pitches, two 16' and 8' pure tones and an 8' reed. Expression : Single pedal controlling entire organ plus soft, medium and loud volume control on special effect control panel.Vibrato : Tabs for separate selective tremulant for bright wave voices on bothmanuals. Separate tab channels vibrato to pedal division.Three degrees of vibrato plus celeste for drawbar tones.A "vibrato bass" tab effect only on those notes below 400 Hz.Percussion : Tabs for Chimes, Harp, Celesta, Marimba, Piano, Glockenspiel,Xylophone, Banjo, Reiterate, Arpeg.OFF on orchestral manual.Traps (tabs) : Pedal, Orch, Accomp tabs (provides Rythm Effects) – Brush, Maracas, Block or Cymbal.Arpeggiator : To easily play arpeggios determined by keys depressed on lowermanual.Sforzando : Reversible piston which produces instantly a full preset organcombination on both manuals and pedal keyboard.Cancel Pistons : Two piston buttons to cancel instantly Orchestral or Accompaniment tab voices.Microphone input: Input socket enabling the organist to speak or sing through the organsystem with or without reverberation.Brilliance and Brilliance tab (On/Off) add richness or presence to the sound. Reverberation: Reverb I and Reverb II tabs provides three degrees of reverberation. Dimensions: With bench and pedal keuboard: wide : 56" ( 142 cm )deep : 51 " ( 130 cm )high : 41 ½ (105 cm )Weight (with bench and pedals) : 574 pounds ( 260 Kg )Weight (X66 console alone): 397 pounds ( 180 Kg )Hammond(R) and Leslie(R) are registered trademarks of Suzuki Musical Instrument Manufacturing Co. Ltd.LESLIE 145.The Leslie 145 is identical to Leslie 147 except that the height of the 145 cabinet is 8" (20cm) lower.Hammond(R) and Leslie(R) are registered trademarks of Suzuki Musical Instrument Manufacturing Co. Ltd. Foreword.Connecting a Leslie tone cabinet to the X-66 Console is not easy since this organ was designed to be used specifically with TC-1277 Hammond tone cabinet.However, to my opinion, the 'doppler effect simulation' generated by TC-1277 cabinet is not at all comparable with the real Leslie effect provided by an original Leslie cabinet such as Leslie 122 or Leslie 147.That is the reason why TC-1277 concept has been definitively discarded.However, based on numerous experiences conducted on that matter, it is strongly advisable to complement the Leslie 145 with an additional external audio system (audio mixer + power amplifier + speakers).The combination of both static and rotary speakers provides the best sound reproduction system that really matches with the optimal performances of the X-66 Console.More details on > 'Restoring X-66' > 'Connecting Leslie cabinet to Hammond X66 Console'.Summarized description.External aspect :- The cabinet has been entirely sandpapered and re-varnished providing a 'like-new' appearance.- Felt material installed inside the cabinet to damp inside reflections and to provide a more 'velvet' sound in the low-end part of the audio spectrum.Internal aspect :- L-147 power amplifier totally renewed with new tubes, new capacitors and resistors. - Power output : 40.96 Wrms @ 1KHz (i.e.: 25.6 Vrms on 16 Ω resistive load).- Input selector added allowing switching from direct link with X-66 Console or viaexternal audio mixer.- original 6-pin Amphenol plug removed and replaced by 5-pin XLR plug.- 3-pin AC Mains socket installed for direct connection to AC Mains.- Switching ON circuit activated by Solid State Relay (SSR) from X-66 Console.- Ground selector added to cancel any ground loop problem in case of connection via external input.- Solid State Relay installed avoiding so any clanky relay noise whenswitching the speed of motors. This SSR is controlled by opto-coupler also toeliminate any ground loop possibility (hum).- All four motors dismounted, cleaned and lubricated, new belts, new grommets and new ball bearings.Hammond(R) and Leslie(R) are registered trademarks of Suzuki Musical Instrument Manufacturing Co. Ltd.Rebuilt Leslie 147 Power Amplifier with adequate adaptations.Identification:S/N FA-18594 – made by Hammond Organ UK - London Original Leslie 145 Specifications.- Physical sizes : High : 33" ( 84 cm )Wide : 29 " ( 74 cm )Deep : 20 ½ ( 52 cm )Weight : 135 pounds ( 61 Kg )- Loudspeakers : Treble : one compression-type driver, 16 ΩBass : 15 " woofer, 16 Ω- Electrical : 230 V or 115 V @ 50 Hz(for 60 Hz operation, two motor pulleys have to be changed).Power consumption : 190 Watts, 1 ½ Amps (230V)- Amplifier : 40 Wrms output @ 1 KHz- Speed rotation: Slow : 0.8 RPS (1)Fast : 6.6 RPS (1)(1) Rotation Per SecondHammond(R) and Leslie(R) are registered trademarks of Suzuki Musical Instrument Manufacturing Co. Ltd.- Hammond X-66 Console will include :- bench ( height is adjustable )- 25 notes pedal keyboard- spare belt for scanner- locking key- X-66 user's manual- CDR with service manual, schematic diagrams, full documentation on all modifications, improvements, video MIDI demo's, pictures taken duringrestoration, PowerPoint presentations made during X-66 conventions, X-66 history, X-66 service bulletins, etc...- set of cables : Power cable, Leslie cable- set of spare fuses- Leslie 145 tone cabinet will include :- power cable- CDR with service manual, full documentation on modifications andimprovements, results of tests and measurements, pictures taken duringrestoration, etc..- spare fuse- 60Hz drum pulleysPackage price (X-66 + L145) : 8.500 €Transport : not includedDedicated export packaging : not includedPayment : via bank transfert before delivery or cashP.O.C.:Daniel ViginRue Albert et Isabelle, 25BE-7130 Binche - BelgiumT.: +32 / 64 / 36.87.77M.: +32 / 475 / 96.43.14E.: *******************E.: *******************Hammond(R) and Leslie(R) are registered trademarks of Suzuki Musical Instrument Manufacturing Co. Ltd.。

montbell月光三型帐篷说明书

montbell月光三型帐篷说明书TAECAMP 1/43比例,树脂制 (树脂)已涂装完成品。

新品牌TAE CAMP第一弹是梦倍路的露营套装。

除了大受欢迎的月光帐篷2型浅褐色/弹簧绿2种颜色外,还配有篷布、篝火台、家具、炊具等。

在制造商协助下,实际设营的齿轮以3D扫描3D扫描,直到帐篷和防水布的褶皱等细节都以1/43的比例尽可能地再现。

不必担心天气和温度,随时随地享受户外氛围。

不附带迷你车和立体模型。

※本产品不会发光。

※本产品不亮灯。

※本产品不使用电池。

本产品不含电池。

本产品不使用燃料。

本产品不含燃料。

本产品不含涂料。

HiBoost Hi17-3SL三合一带宽信号增强器商品说明书

DescriptionHiBoost triple band booster Hi17-3SL is designed to improve mobile signal for end users directly. It covers any indoor area up to 1800 square meters（open space area）and is guaranteed to supply great communication experience with clearer calls and higher mobile data speeds than ever.Key Features•Real-time LCD display•Manual and automatic gain control functions•Built-in indoor antenna•Setup and monitoring via a mobile app•Self-oscillation protection•Quality built, strong and durable construction•Conforms to ETSI&3GPP standards•Hi17-3SL mobile signal booster withbuilt-in indoor antenna•Outdoor wide band directional antenna•50 ft (15.2m) low-loss HiBoost200 3D cable•12V/3A, AC/DC power supply•SMA male to N-female connectorSpecification RF Parameter UplinkDownlink Frequency Range 800MHz832~862MHz 791~821MHz 900MHz880~915MHz 925~960MHz 2100MHz 1920~1980MHz 2110~2170MHz Max .Gain 65dB MGC ( Step Attenuation ) ≥31dB / 1dB step Intelligent AGC* ALC≥42dB ISO ≥42dB Gain Flatness Typical≤5dB (p -p)**************************Typical≤5dBV.S.W.R Typical ≤2Group Delay ≤1μsFrequency Stability≤0.01ppm Electrical ParameterPower SupplyInput AC90~264V,50/60Hz, Output DC12V/3A Power Consumption≤12W Input & Output Impedance 50 ohm IndicatorLCD Display Frequency, Gain, Output Power, ALC, ISO, etc. Mechanical Parameter I /O Port Type N-Female Dimension6*9.7*1.4inch/153*246*36mm Weight ≤3.97lbs/1.8KG Environment ParameterOperating Temperature-10ºC~+55ºC Storage Temperature-10ºC~+80ºC Relative Humidity5% - 95% Barometric Pressure55 kPa -106 kPa Environment Conditions IP40 *MGC, ALC and ISO share intelligent AGC 42 dB range.** ALC: 42dB automatic gain adjustment range to stabilize the output power.*** ISO: 42dB intelligent isolation processing to avoid self-oscillation.Note: This is a typical specification for room temperature. We reserve the right to change this specification without prior notice. 65dB Max .Gain 17dB m17dB m。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

parameter
驱动器件Driving device
Constant drive IC恒流驱动
刷新频率Refresh frequency
≥1200HZ
灰度/颜色Grey scale/colors
4096级,可显示16.7M颜色
4096gray level/16.7M colors
平均无故障时间MTBF
20W
模组厚度Module thickness
22mm
模组重量Weight
0.37kg
驱动方式Drive type
恒流驱动Constant drive
扫描方式Scan mode
1/8
接口方式Port type
HUB08A
白平衡亮度Brightness of white balance
≥3000～3500cd/m2
fan 2pcs
箱体分辨率Pixel per cabinet
84mm*96mm
最佳视距Best viewing distance
11M～30M
最佳视角Best viewing angle
110°(W) 55°(H)
环境温度+85℃
工作working:-20℃～+50℃
模组图片
Module pictures
模组正面模组背面
LED屏机箱
Cabinet
箱体尺寸Dimension
960mm*960mm*100 mm
箱体模组数Monomer Module Number
18pcs
供电方式Power supply
5V/40A*3 pcs
散热方式Thermal discharge
相对湿度Relative humidity
10%-95%
屏体厚度Thickness
122mm
供电
Power
工作电压Working voltage
AC220V±10%
平均功耗Average Power consumption
150W/㎡
最大功耗Max.Power consumption
≤600W/㎡
电流Current
物理点间距Pixel pitch
10.66mm
物理密度Pixels Density
8736点/m2
发光点颜色Pixel configuration
1R1G1B
LED封装Package mode
DIP546三合一
模组分别率Pixel resolution
28dots(W)*16 dots(H)
模组最大功耗Max Power
产品规格书
SP10.66户外全彩技术参数
SP10.66 outdoor full-color technology parameters
模组
Unit Module
项目Item
参数Parameter
产品型号Model Number
SC-P10.66-8S
模组尺寸Module size
320mm*160mm
≥9000hours
电源开关Power switch
自动开关Automatic switch
显示模式Display Mode
≥800*600/1024*768
≤20mA(single LED)
控制系统
Control system
控制主机CPU
Pentium4 or above P4或以上
操作系统Operation system
WIN98/2000/NT/XP/WIN7
控制方式Control method
同步控制Synchronization
主要技术参数
Main technical