电缆修补3M Scotchcast 2130 MSDS
3M Scotchkote熔结环氧涂层134产品使用指南 说明书
3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 134Handling and Safety Precautions: Read all Health Hazard, Precautionary and First Aid, Material Safety Data Sheet, and product label prior to handling or use.Product Description 3M Scotchkote Fusion-Bonded Epoxy Coating 134 is a one-part, heat curable, thermosetting epoxy coating designed for corrosion protection of metal. The epoxy is applied to preheated steel as a dry powder which melts and cures to a uniform coating thickness when properly applied. This bonding process provides excellent adhesion and coverage on applications such as valves, pumps, pipe drains, hydrants, pipes, tanks and porous castings. Scotchkote coating 134 is NSF/ANSI 61 certified for potable water applications and is also resistant to wastewater, corrosive soils, hydrocarbons, harsh chemicals, and sea water. Powder properties allow easy manual or automatic application by electrostatic or air-spray equipment.Product Features • No primer required for most applications.• For electrostatic or air-spray application on preheated metal articles.• Can be electrostatically applied to unheated metal parts and subsequently cured by baking. • Long gel time allows application on large or complex articles, minimizing fear of runs, sags,laminations, or unsightly overspray.• Especially useful for coating the inside of pipe or other fabrications where a smooth, corrosion resistant coating is required.• Can be machined by grinding or cutting to meet close tolerance requirements.• Allows easy visual inspection of coated articles.• Can be painted with alkyd paint, acrylic lacquer, polyurethane, or acrylic enamel for colorcoding.• Applied coating will not sag cold flow.• Lightweight for lower shipping costs.• Protects over wide temperature range.• Resists direct burial soil stress.• Resists cavitation and cathodic disbondment.• Can be used for elevated temperature service in presence of H2S, CO2, CH4, crude oil and brine when applied over phenolic primer such as 3M Scotchkote Liquid Phenolic Primer 345. • Long-term performance history in water, sewage, and other service environments.• Scotchkote coating 134 has been tested and certified to NSF /ANSI Standard 61, Drinking Water System Components. For NSF certified applications, the max approved thickness is 60 mil (1.5 mm) and the maximum approved operating temperature is 140°F/60°C. Primers may not be used for potable water applications.• Scotchkote coating 134 meets the requirements of AWWA Standard C213 and C550.Temperature Operating Range For non-potable water applications Scotchkote coating 134, when properly applied to a nominal thickness of 15 mils, should perform on pipelines operating between -100°F/-73°C to 203°F/95°C. For temperatures reaching 230°F/110°C thicker coatings, greater than 30 mils, may improve the service capability. However, it is difficult to accurately predict field performance from the laboratory data due to the wide variations in actual field conditions. Soil types, moisture content, temperatures, coating thickness, and other factors specific to the area all influence the coating performance and upper temperature operating limits.General Application Information 1. Remove oil, grease and loosely adhering deposits.2. Abrasive blast clean the surface to NACE No. 2/SSPC-SP10 ISO 8501:1,Grade SA 2 ½ near-white metal.3. Apply mechanical masks or mask with materials such as 3M Scotch® Glass Cloth Tape 361 or 3M Aluminum Foil Tape 425 as required.4. Preheat article to the desired application temperature per cure specifications.5. Deposit Scotchkote coating 134 by powder spray to the specified thickness.6. Cure according to cure specifications.7. Visually and electrically inspect for coating flaws after the coating has cooled.8. Repair all defects.Cure Specifications Scotchkote coating 134 may be applied to metal articles which have been preheated to a temperature of 300°F/149°C to 475°F/246°C. After application, Scotchkote coating 134 must be cured according to the cure guide to achieve maximum performance properties.If Scotchkote coating 134 is electrostatically applied to unheated parts, the cure time should be measured from the time the coated part reaches the cure temperature. After cure, the coating may be force cooled using air or water to facilitate inspection and handling.Product - Physical and Chemical PropertiesContinued Product - Physical and Chemical Properties3M and Scotchkote are trademarks of the 3M Company.3StorageIn a cool dry location less than 80°F (27°C)Shelf-Life18 months from date of manufactureAvailabilityFor ordering, technical, product information, or the Safety Data Sheet, call: Phone: 800-722-6721 Fax: 877-601-1305Important NoticeAll statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product, which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order, shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.Warranty; Limited Remedy; Limited LiabilityBecause conditions of product use are outside of our control and vary widely, the following is made in lieu of all express or implied warranties: This product will conform to 3M’s published product specifications and be free from defects in material and manufacture on the date of your purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective upon your receipt, your exclusive remedy shall be, at 3M’s option, to replace the 3M product or refund the purchase price of the 3M product . Except where prohibited by law, 3M will not be liable for any direct, indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.Electrical Markets Division6801 River Place Blvd. Austin, TX 78726-9000 800.722.6721/corrosionPlease recycle© 3M 2016 All rights reserved 78-8141-8528-2 Rev A。
3M Scotchcast双组分环氧阻燃型电缆修复灌封胶Scotchcast 2131 TDS
3M™ Scotchcast™Flame-Retardant Compound 2131Description3M™ Scotchcast™ Flame-Retardant Compound 2131 is a two-part polyurethane resin designed to replace the cable jacket when splicing or repairing mine and portable cables. Its formulation makes it particularly suited to withstand the rugged conditions under which mine and portable cables must operate.Flame-Retardant Compound 2131 is also used as the insulating material for cable splices operating at up to 1000 volts and designed for 194ºF (90ºC) continuous use/266ºF (130ºC) overload.When used in accordance with the appropriate kit configuration, Compound 2131 meets Part 7, Title 30 CFR and carries the following MSHA approvals:* The Compound 2131 is not included with the “M” Series kits and must be ordered separately.This compound is available in a convenient, pre-measured, two-part closed mixing pouch of the following sizes:BagWeight oz (g) Volume in 3 (cm 3) B Size 7.5 (213) 10.6 (175) C Size21.5 (612)30.6 (502)Bulk components of Compound 2131 are also available separately in 5 gallon (18,9 L) containers:∙ Each container of Part A contains 44.5 pounds (20,1 kg) [635 fl.oz. (18,7 L)] ∙ Each container of Part B contains 46.5 pounds (21,0 kg) [566 fl.oz. (16,7 L)]07-KA060002-MSHA3M™ Scotchcast™ Inline Splice Kit for Flexible Cable 82-F Series3M™ Scotchcast™ Flexible Power Cable Tap Splice 82-BF1 07-KA060007-MSHA 3M™ Scotchcast™ Mine and Portable Splice Kits 8096 Series3M™ Three-Conductor Inline Splicing Kits 5750 and 5760 Series3M™ Scotchcast™ Jacket Repair Kits M Series*Agency Approvals& SelfCertificationsRoHS2011/65/EU"RoHS 2011/65/EU" means that the product or part does not contain any of thesubstances in excess of the maximum concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. Thisinformation represents 3M's knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.SeaZheng Shanghai Co.,LTD.海郑实业（上海）有限公司Tel:86-21-64889179;Fax:86-21-64889379E-mail:zhanghe9966@ ,sale@QQ:1215850898,1216990632;MSN:zhanghe9966@ WEB ： Features∙ Flame-retardant∙Bonds to most modern cable jackets∙Bonds to itself∙Tough, yet flexible∙Available in two-part closed mixing pouch for easy mixing and pouring∙Excellent multi-purpose moisture sealing resinApplications ∙To replace or repair the jacket on both single and multi-core power cables∙To insulate between conductors of multi-core splices operating at up to 1000 volts∙To seal the crotch or sheath when terminating multi-core cablesTypical Properties Not for specifications. Values are typical, not to be considered minimum or maximum.Properties measured at room temperature 73°F (23°C) unless otherwise stated.Physical Properties (Test Method)Typical Value US units (metric)Color BlackHardness (ASTM D2240)82 Shore ADensity0.703 oz/in3 (1,217 g/cm3) Tensile Strength (ASTM D412)1038 psi (73,0 kg/cm2) Elongation (ASTM D412) 339%Glass Transition Temperature, T g (DSC)-103 ºF (-75ºC) Maximum Exotherm, 100g (3M TM-67) 147ºF (64ºC) riseGel Time @ 75ºF (23ºC) (3M Method TM-67)17 minutesMoisture Absorption (ASTM D471)168 hrs. Immersion @ 212ºF (100ºC) 4.9%Adhesion to Metals(lb/in2) (3M TM-456)Copper 550.2Brass 274Steel 491.3Aluminum 221Adhesion to Cable Jackets (lb/in2) (3M TM-457)Vinyl 125Neoprene 115Nylon >72XLPE 208.5Electrical Properties (Test Method) Typical ValueDielectric Strength (ASTM D149) 343 V/mil (13,5 kV/mm)Dielectric Constant, @ 60Hz (ASTM D150) 5.22 @ 73ºF (23ºC)6.33 @140ºF (60ºC) 6.56 @194ºF (90ºC)Dissipation Factor, @ 60Hz (ASTM D150) 5.6% @ 73ºF (23ºC) 7.9% @140ºF (60ºC) 17.0% @194ºF (90ºC)Usage Information IMPORTANT:Product should remain in the sealed container/envelope until ready to use. In coldweather, warm closed mixing pouch to 60°F (16°C) or warmer before mixing. Keep in a warm area, such as truck cab or inside pocket, until ready to use.Closed Mixing Pouch:∙ Tear open the protective envelope and remove the closed mixing pouch ∙ Before breaking the barrier, squeeze the bag to premix the separatecomponents.∙ Firmly grasp each flat side of the bag near the center barrier, while pullingthe sides of the barrier apart and rolling the sides of thumbs through the barrier. Break the barrier all the way across to the side seals.∙ Alternately squeeze each end of the bag, forcing the resin back and forth(30 seconds).∙ Strip the resin from the corners of the bag and continue to mix until thecolor is uniform (additional 30 seconds, maximum). ∙ Clip off a corner of the closed mixing pouch and pourBulk Components:Measure the appropriate quantity of each component as indicated in the table below, then thoroughly mix to a uniform color and consistency prior to use. Bulk components should be blanketed with nitrogen to prevent moisture contaminationComponent Color Weight Ratio(w/w) Volume Ratio(v/v) Part A Pale Yellow 1 1 Part BBlack2.11.69Typical De-Mold/Cure Time:NOTE: Values are typical, not to be considered minimum or maximum. Always confirm that material is no longer tacky prior to de-molding.Handling and Safety Precautions:Read all Health Hazard, Precautionary and First Aid statements found in the Material Safety Data Sheet (MSDS) and/or product label of chemicals prior to handling or use.Temperature De-Mold Time Approximate Cure Time 70°F (21°C) 1.5 – 2 hrs 16 – 24 hours 50°F (10°C) 3.5 – 4 hrs 24 – 30 hours 32°F (0°C) 6 – 8 hrs 36+ hours CautionWorking around energized electrical systems may cause serious injury ordeath. Installation should be performed by personnel familiar with good safety practice in handling electrical equipment. De-energize and ground all electrical systems before installing product.Shelf Life & Storage 3M™ Scotchcast™ Flame-Retardant Compound 2131 has a 3-year shelf life from date of manufacture when stored in the factory-sealed packaging under humidity controlled storage (10°C/50°F to 27°C/80°F and <75% relative humidity).Availability Please contact your local distributor; available from /electrical [Where to Buy] or call 1.800.245.3573.Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Beforeusing this product, you must evaluate it and determine if it is suitable for your intended application.You assume all risks and liability associated with such use. Any statements related to the product,which are not contained in 3M’s current publications, or any contrary statements contained on yourpurchase order, shall have no force or effect unless expressly agreed upon, in writing, by anauthorized officer of 3M.Warranty; Limited Remedy; Limited Liability This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.3M and Scotchcast are trademarks of 3M Company.3Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000Please recycle© 3M 2013 All rights reserved78-8129-9502-1 Rev C SeaZheng Shanghai Co.,LTD.海郑实业（上海）有限公司Tel:86-21-64889179;Fax:86-21-64889379E-mail:zhanghe9966@,sale@QQ:1215850898,1216990632;MSN:zhanghe9966@WEB： 。
3M Scotch-Weld粘合剂DP420黑色 DP420 NS黑色 产品说明书
Scotch-W eld TMEpoxy AdhesiveDP420 Black •DP420 NS Black •DP420 Off-White •DP420 LH2022Product Description 3M™Scotch-Weld™Epoxy Adhesives are high performance, two-part epoxyadhesives offering outstanding shear and peel adhesion, and very high levels ofdurability.Features •High shear strength•High peel strength•Outstanding environmentalperformance•Easy mixing•20 minute worklife •Controlled flow (3M™ Scotch-W eld™ Epoxy Adhesive DP420 NS Black)•Recognized as meeting UL 94 HB – Underwriters Laboratory Horizontal Burn Flammability Test (3M™ Scotch-W eld™ Epoxy Adhesive DP420 Off-White)•Low halogen content (3M™ Scotch-W eld™Epoxy Adhesive DP420 LH)Typical Uncured Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.3M™Scotch-W eld™Epoxy AdhesiveDP420 Black • DP420 NS Black • DP420 Off-White • DP420 LHTypical Cured Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.The properties of cured 3M™ Scotch-W eld™ Epoxy Adhesive DP420 NS Black and 3M™ Scotch-W eld™ Epoxy Adhesive DP420 LH are expected to be similar to the properties of 3M™ Scotch-W eld™ Epoxy Adhesive DP420 Black and 3M™Scotch-W eld™Epoxy Adhesive DP420 Off-White, respectively as described by data in the following sections of this technical data sheet.An exception to this is the concentration of halogens in 3M™ Scotch-Weld™ Epoxy Adhesive DP420 LH. 3M™ Scotch-Weld™ Epoxy Adhesive DP420 LH is a form of 3M™ Scotch-Weld™ Epoxy Adhesive DP420 Off-White that can be considered “lo w halogen”. Low halogen is defined by the Electrotechnical Commission (IEC) 61249-2-21 standard as having less than 900 ppm chlorine, 900 ppm bromine, and less than 1500 ppm total chlorine and bromine.3M™ Scotch-Weld™ Epoxy Adhesive DP420 LH Test ResultsPage 2 of 103M™Scotch-W eld™Epoxy AdhesiveDP420 Black • DP420 NS Black • DP420 Off-White • DP420 LHTypical Curing Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.Rate of Strength Build-UpAluminum, Overlap Shear (7 mil Bondline) (ASTM D 1002-72)Bonds Tested at 73°F (23°C)3M™ Scotch-Weld™ Epoxy Adhesive DP420 Black1This represents the oven temperature to which the bonds were subjected for the prescribed time. The average bondline temperature during the cure time will be somewhat lower than the oven temperature.NOTE: The data in this data sheet were generated using the 3M™ EPX Applicator System equipped with an EPX static mixer, according to manufacturer’s directions. Thorough hand-mixing will afford comparable results.Page 3 of 103M™Scotch-W eld™Epoxy AdhesiveDP420 Black • DP420 NS Black • DP420 Off-White • DP420 LHTypical Adhesive Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.Substrates and TestingA.Overlap Shear (ASTM D 1002-72)Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in.wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.The separation rate of the testing jaws was 0.1 in. per minute for metals, 2 in. per minute for plastics and 20 in. per minute for rubbers. The thickness of the substrates were: steel, 0.060 in.;other metals, 0.05-0.064 in.; rubbers, 0.125 in.; plastics, 0.125 in.B.T-peel (ASTM D 1876-61T)T-peel strengths were measured on 1 in. wide bonds at 73°F (23°C). The testing jaw separation rate was 20 inches per minute. The substrates were 0.032 in. thick.C.Bell Peel (ASTM D 3167)Bell peel strengths were measured on 1/2 in. wide bonds at the temperatures noted. The testing jaw separation rate was 6 in. per minute. The bonds are made with 0.064 in. bonded to 0.025 in.thick adherends.D.Cure CycleWith the exception of Rate of Strength Build-Up Tests, all bonds, were cured 7 days at 73°F (23°C) at 50% RH before testing or subjected to further conditioning or environmental aging.Aluminum, Overlap Shear, at Temperature (PSI)1Represents time in test chamber oven before test.Metals, Overlap Shear, Tested @ 73°F (23°C) (PSI)3M™Scotch-W eld™Epoxy AdhesiveDP420 Black • DP420 NS Black • DP420 Off-White • DP420 LH NT: Not testedTypical Adhesive Performance Characteristics (continued)Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.Substrates and Testing (continued)Aluminum, T-Peel (PIW), at TemperatureMetals, T-Peel, Tested @ 73°F (23°C) (PIW)Aluminum, Bell Peel (PIW), at TemperatureOther Substrates, Overlap Shear Tested @ 73°F (23°C) (PSI)1Isopropyl Alcohol Wipe. See Surface Preparation Section D for additional information.2Isopropyl Alcohol/Abrade/Isopropyl Alcohol: See Surface Preparation Section E for additional information.3Substrate failure.3M ™ Scotch-W eld ™Epoxy AdhesiveDP420 Black • DP420 NS Black • DP420 Off-White • DP420 LHTypical Adhesive Performance Characteristics (continued)Note: The following technical information and data should be considered representativeor typical only and should not be used for specification purposes.Substrates and Testing (continued) Environmental Resistance Aluminum (Etched)Measured by Overlap Shear Tested @ 73°F (23°C) (PSI)1 (ASTM D 1002-72)1Data reported are actual values from the lots tested and may be higher than values published elsewhere in this data sheet.2 d = days3i = immersion3M ™ EPXPneumatic Applicator Delivery Rates200 ml Applicator – Maximum Pressure 58 psi*Tests were run at a temperature of 70°F ± 2°F (21°C ± 1°C) and at maximum applicator pressure.3M™Scotch-W eld™Epoxy AdhesiveDP420 Black • DP420 NS Black • DP420 Off-White • DP420 LHHandling/Application Information Directions for Use3M™ Scotch-Weld™ Epoxy Adhesive DP420 is supplied in dual syringe plastic duo- pak cartridges as part of the 3M™ EPX Applicator System. The duo-pak cartridges are supplied in 50 ml, 200 ml and 400 ml configurations. To use the EPX cartridge system simply insert the duo-pak cartridge into the EPX applicator. Next, remove the duo-pak cartridge cap and expel a small amount of adhesive to be sure both sides of the duo-pak cartridge are flowing evenly and freely. If simultaneous mixing of Part A and Part B is desired, attach the EPX mixing nozzle to the duo-pak cartridge and begin dispensing the adhesive.When mixing Part A and Part B manually the components must be mixed in the ratio indicated in the typical uncured properties section of this data sheet. Complete mixing of the two components is required to obtain optimum properties.Two-part mixing/proportioning/dispensing equipment is available for intermittent or production line use. These systems are ideal for line uses because of their variable shot size and flow rate characteristics and are adaptable to most applications.Apply adhesive to clean, dry surfaces, joint parts and secure until adhesive sets (see rate of strength build up).Surface Preparation The following surface preparations were used for substrates described in this TechnicalData Sheet.A.Aluminum EtchOptimized FPL Etch - 3M (test method C-2803)1.Alkaline degrease – Oakite 164 solution (9-11 oz./gallon water) at 190°F ±10°F (88°C ± 5°C) for 10-20 minutes. Rinse immediately in large quantitiesof cold running water (3M test method C-2802).2.Optimized FPL Etch Solution (1 liter):Material AmountDistilled Water 700 ml plus balance of liter (see below)Sodium Dichromate 28 to 67.3 gramsSulfuric Acid 287.9 to 310.0 gramsAluminum Chips 1.5 grams/liter of mixed solutionTo prepare 1 liter of this solution, dissolve sodium dichromate in 700 ml ofdistilled water. Add sulfuric acid and mix well. Add additional distilled waterto fill to 1 liter. Heat mixed solution to 66 to 71°C (150 to 160°F). Dissolve1.5 grams of 2024 bare aluminum chips per liter of mixed solution. Gentleagitation will help aluminum dissolve in about 24 hours.To FPL etch panels, place them in the above solution at 150 to 160°F (66 to71°C) for 12 to 15 minutes.Note: Review and follow precautionary information provided by chemicalsuppliers prior to preparation of this etch solution.3.Rinse immediately in large quantities of clear running tap water.3M™Scotch-W eld™Epoxy AdhesiveDP420 Black • DP420 NS Black • DP420 Off-White • DP420 LHSurface Preparation (continued)4.Dry – air dry approximately 15 minutes followed by force dry at 140°F(60°C) maximum for 10 minutes (minimum).5.Both surface structure and chemistry play a significant role in determining thestrength and permanence of bonded structures. It is therefore advisable tobond or prime freshly primed clean surfaces as soon as possible after surfacepreparation in order to avoid contamination and/or mechanical damage.Please contact your 3M sales representative for primer recommendations.B.Oakite DegreaseOakite 164 solutions (9-11 oz./gallon of water) at 190°F ± 10°F (88°C ± 5°C) for 2 minutes. Rinse immediately in large quantities of cold running water.C.MEK/Abrade/MEKWipe surface with a methyl ethyl ketone (MEK) soaked swab, abrade and wipe with a MEK soaked swab.* Allow solvent to evaporate before applying adhesive.*Note: When using solvents, extinguish all ignition sources, including pilot lights, and follow the manufacturer’s precautions and directions for use.D.Isopropyl Alcohol Wipe Only Surface PreparationWipe surface with an isopropyl alcohol soaked swab.* Allow solvent to evaporate before applying adhesive.*Note: When using solvents, extinguish all ignition sources, including pilot lights, and follow the manufacturer’s precautions and directions for use.E.Isopropyl Alcohol/Abrade/Isopropyl Alcohol Surface PreparationWipe surface with an isopropyl alcohol soaked swab, abrade using clean fine grit abrasives, and wipe with an isopropyl alcohol soaked swab.* Then allow solvent to evaporate before applying adhesive.*Note: When using solvents, extinguish all ignition sources, including pilot lights, and follow the manufacturer’s precautions and directions for use.3M ™ Scotch-W eld ™Epoxy AdhesiveDP420 Black • DP420 NS Black • DP420 Off-White •DP420 LHStorageStore products at 60-80°F (15-27°C) for maximum shelf life.Shelf LifeThese products have a shelf life of 24 months from date of manufacture in original containers at room temperaturePrecautionary InformationRefer to Product Label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501.Technical InformationThe technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information.Product Selection and Use Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the useand performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property.Warranty,Limited Remedy, and DisclaimerUnless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR APARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.Limitation of LiabilityExcept for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2008 standards.Industrial Adhesives and Tapes Division3M Center, Building 225-3S-06St. Paul, MN 55144-1000800-362-3550 • 877-369-2923 (Fax) /structuraladhesives 3M and Scotch-Weld are trademarks of 3M Company. ©3M 2012 78690097106Automotive Disclaimer Automotive Applications: This product is an industrial product and has not been designed or tested for use in certain automotive applications, including, but not limited to, automotive electric powertrain battery or high voltage applications. This product does not fully adhere to typical automotive design or quality system requirements, such as IATF 16949 or VDA 6.3. This product may not be manufactured in an IATF certified facility and may not meet a Ppk of 1.33 for all properties. The product may not undergo an automotive production part approval process (PPAP). Customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s automotive application and for conducting incoming inspections before use of the product. Failure to do so may result in injury, death, and/or harm to property. No written or verbal statement, report, data or recommendation by 3M related to automotive use of the product shall have any force or effect unless in an agreement signed by the Technical Director of 3M’s Automotive Division. Customer assumes all responsibility and risk if customer chooses to use this product in an automotive electric powertrain battery or high voltage application, and 3M will not be liable for any loss or damage arising from or related to the 3M product or customer’s use of the product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity or recall costs), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability. In no event shall 3M be liable for any damages in excess of the purchase price paid for the product.NOTWITHSTANDING ANY OTHER STATEMENT TO THE CONTRARY, 3M MAKES NO REPRESENTATIONS, WARRANTIES OR CONDITIONS WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE PRODUCT IF USED IN AN AUTOMOTIVE ELECTRIC POWERTRAIN BATTERY OR HIGH VOLTAGE APPLICATION, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY ON PERFORMANCE, LONGEVITY, SUITABILITY, COMPATIBILITY, OR INTEROPERABILITY, OR ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE.。
电缆工程标签规范
电缆工程标签规范2002-XX-XX发布2002-XX-XX实施华为技术有限公司发布目次前言 ......................................................... ............................................................. . (3)1 范围 42 术语和定义 43 电缆工程标签介绍 43.1 工程标签 43.2 组成 43.3 标签材料 43.4 标签种类及结构 43.5 标签的排版效果图 63.6 标签内容的字体和方向83.6.1 采用专用笔手写的方式83.6.2 采用打印机打印的方式93.7 标签的粘贴103.8 标签和备用标签配置124 电缆工程标签的内容124.1 告警外接电缆的工程标签134.2 网线的工程标签144.3 光纤的工程标签154.4 中继电缆的工程标签174.5 用户电缆的工程标签194.6电源线的工程标签204.6.1直流电源线的工程标签204.6.2交流电源线的工程标签215 附录A 226 附录B 237 参考文献24前言本规范的其他系列规范：无与对应的国际标准或其他文件的一致性程度：无规范代替或作废的全部或部分其他文件：代替DKBA3292-2002.06 与其他规范或文件的关系：作为各产品安装手册工程标签内容的指导文件与规范前一版本相比的升级更改的内容：1、标签的排版更改2、标签的填写内容更改3、增加标签的打印方式4、删除无线产品的天馈线部分的内容本规范由中试结构造型设计中心电缆设计部提出本规范主要起草和解释部门：中试结构造型设计中心电缆设计部本规范主要起草专家：电缆设计部：魏立新（08318）、吴国祥（18066）、来宝荣（14357）、涂修宇（16155）、王俊宁（17614）本规范主要评审专家：总体技术办：曾祥森（03810）光网络产品技术支援管理部：袁宙祥（25237）、马骥（11239）、袁海涛（29709）、蒙方明（19015）传输系统设计部：刘军强（12182）固网产品技术支援管理部：何平洋（03721）、刘勇军（04789）无线产品技术支援管理部：赵赐（24768）、万高峰（17693）工程管理部：喻伟（06700）、郭鹏（06061）电缆设计部：邱俊峰（20045）、朱庆贵（07406）、汪冠政(26020)、黄胜强(29890)本规范批准部门：中试结构造型设计中心本规范所替代的历次修订情况和修订专家为：规范号主要起草专家主要评审专家DKBA3292-2002.06 王俊宁(17614) 喻伟(06700)、梁宏(07441)、人员较多、其余请见前一版本规范DKBA3292-2002.11 王俊宁(17614) 见上面所列评审专家人员电缆工程标签规范1范围本规范适用于公司外部电缆/光纤在工程安装时的使用，对标签的粘贴方式、标签内容、格式等均作了规定；工程标签按照电源线和信号线分为两种，信号线包括告警外接电缆、网线、光纤、中继电缆、用户电缆等，电源线包括直流电源线和交流电源线。
3M防火封堵产品介绍
产品特点：
无需预处理被保护物质。 施工简便。
使用寿命长达50年。
不含人造纤维和石棉。
1.测量尺寸 裁剪E－Mat
2. 包裹E－ Mat
3. E－Mat封 边
复合石化等快速升温场所的防火保护。
极好的吸热性：可以促进散热。
设计、施工以及售后服务
》确定客户项目防火封堵要求
确定具体封堵部位 明确具体封堵系统选（封堵材料）择标准
带保温层)钢管,铜管Insulated steel and copper pipes 电缆束Jacketed cables and cable bundles 小直径塑料管Closed or vented plastic pipes
For use with 适用于 混凝土,砖,轻质隔墙,防火木楼板 Concrete, masonry, drywall and wood floor Assemblies
超薄厚度（仅7mm），不影响电缆的散热。 高达8倍的遇火膨胀性能
长达100年的使用寿命 众多的国际国内认证报告和证书 最高封堵面积可达3.34m2 众多的工程业绩
•
•
可以运用在混凝土、石膏板以及 砌筑结构的基层。
膨胀材料列表
产品
Ultra-GS
CS195+
膨胀倍率
25
10
膨胀机理
物理膨胀
化学膨胀 炭化层
• CECS 154：2003中国工程建设标准 《建筑防火封堵应用技术
规程》
3M Fire Protection Products
A Complete Line of Firestopping Solutions
Through Penetration Firestop Testing
3M电工产品目录说明书
0.04 1.0
0.06 1.5
0.06 1.5
0.08 2.0
0.08 2.0
0.13 3.3
0.13 3.3
0.04 1.0 0.04 1.0
0.04 1.0
0.04 1.0
0.04 1.0
0.06 1.5
0.06 1.5
0.08 2.0
0.08 2.0
Width In. mm 0.50 12.7 0.50 12.7 0.50 12.7 0.50 12.7 0.50 12.7 0.50 12.7 0.50 12.7 0.50 12.7 0.75 19.1 0.75 19.1 0.75 19.1 1.00 25.4 1.00 25.4 1.00 25.4 1.00 25.4 1.00 25.4 1.00 25.4 1.00 25.4 1.00 25.4
*Other colors available, replace H1T with H2T (Yellow), H3T (Black), and H4T (Red). Order number of rolls required.
Length In. mm 0.84 21.3 1.65 41.9 0.25 6.4 0.34 8.6 0.44 11.2 0.25 6.4 0.25 6.4 0.34 8.6 0.34 8.6 0.44 11.2 0.44 11.2 0.64 16.3 0.64 16.3 0.84 21.3 0.84 21.3 1.65 41.9
Min. Cable O.D.
In.
mm
0.170 4.3
C4. Cable Management
Material/Print Method Selection Guide
3M防火封堵方案
Project:2006-053M电力系统防火封堵3M中国有限公司2006年05月一．3M公司简介3M公司全称为明尼苏达矿业制造股份有限公司（由英文全名M innesota M ining & M anufacturing Corporation中前三个英文单词的首字母组成），多年来一直是全球500强企业之一，并名列全球“最受崇敬企业”前十位，也是美国华尔街道琼斯30种工业股票成分指数的公司。
公司创建于1902年，总部设立在美国明尼苏达州圣保罗市。
3M生产制造的产品在世界二百多个国家及地区进行销售。
一百年来，3M针对客户的需求发明了多不胜数的创新产品。
“3M创意全为您”的企业精神已成为3M公司服务客户的真实写照。
3M中国有限公司在中国由外商投资的独资企业，并在国内建有自己的工厂和技术中心，可更好地为中国的客户提供全面的技术服务。
3M防火封堵材料产品是基于其核心技术---精密陶瓷材料开发出来的创新产品，产品完全符合市场需求。
得到全球范围内广大客户的充分信赖。
3M卓越的产品质量，严格的质量控制，让全世界的客户感到放心。
今天，3M防火延烧产品已广泛应用在核电站、高层建筑、化工厂、电信大楼、变电站、发电厂、医院、半导体芯片厂、钢铁厂、军工厂、船舶工业、银行、大型公众场所等等。
全系列的防火封堵材料组成了3M的具有创新意义的完善的建筑物被动防火保护系统，这些系统有助于阻止火焰、烟雾及有毒气体的蔓延和传播。
产品被许多权威机构如UL、FM、Warnock-Hersey、Omega Point及中国国家防火材料检测中心NCFM检测认证为合格的被动防火保护系统。
事实上3M公司是世界上目前为止唯一的能够制造出如此众多的被认证的被动防火材料的公司。
本资料介绍使用的3M公司防火封堵材料已通过国家防火建筑材料质量监督检验中心检测合格。
所使用的3M公司防火封堵材料通过了美国UL：Underwriters,Inc.保险商实验所（又称美国安全检测实验室）和美国FM：Factory Mutual Researcdh 美国ＦＭ保险公司研究中心检测合格。
3M Scotchcast双组分环氧阻燃型电缆修复灌封胶Scotchcast 2131 MSDS
Material Safety Data SheetCopyright, 2014, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.PRODUCT NAME: 3M Scotchcast™Flame-Retardant Compound 2131 (Parts A and B)MANUFACTURER: 3MDIVISION: Electrical Markets DivisionADDRESS: 3M Center, St. Paul, MN 55144-1000, USATelephone:1-888-3M HELPS (1-888-364-3577)Issue Date: 02/19/14Supercedes Date: 11/19/12Document Group: 28-8293-4ID Number(s):80-6114-6812-7, 80-6114-6813-5, 80-6114-6814-3, 80-6114-6815-0, 80-6114-6816-8, 80-6114-6817-6, 80-6114-6818-4, 80-6114-6819-2, 80-6114-6820-0, 80-6114-6821-8, 80-6114-6822-6, 80-6114-6823-4, 80-6114-6824-2, 80-6114-6825-9, 80-6114-6826-7, 80-6114-6874-7,80-6114-6875-4, 80-6114-6876-2, 80-6116-0620-5, 80-6116-0621-3This product is a kit or a multipart product which consists of multiple, independently packaged components. An SDS for each of these components is included. Please do not separate the component SDSs from this cover page. The document numbers of the SDSs for components of this product are:28-7650-6, 28-7666-2Revision Changes:Section 16: Disclaimer (first paragraph) information was modified.Section 16: Disclaimer (second paragraph) information was modified.Kit: Component heading paragraph information was modified.Section 16: Web address information was modified.Section 1: Address information was modified.Copyright information was modified.Telephone header information was modified.Company Telephone information was modified.DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application.3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M3M USA SDSs are available at Safety Data SheetCopyright,2014,3M Company.All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group:28-7666-2Version Number: 2.00Issue Date:02/19/14Supercedes Date: 06/24/111.1. Product identifier3M™Scotchcast™Flame Retardant Resin 2131 (PART B)Product Identification Numbers80-6114-6841-61.2. Recommended use and restrictions on useRecommended useElectrical, Part B of two part electrical resin1.3. Supplier’s detailsMANUFACTURER: 3MDIVISION: Electrical Markets DivisionADDRESS: 3M Center, St. Paul, MN 55144-1000, USATelephone:1-888-3M HELPS (1-888-364-3577)1.4. Emergency telephone number1-800-364-3577 or (651) 737-6501 (24 hours)2.1. Hazard classificationSerious Eye Damage/Irritation: Category 1.Carcinogenicity: Category 2.2.2. Label elementsSignal wordDangerSymbolsCorrosion | Health Hazard |PictogramsHazard StatementsCauses serious eye damage.Suspected of causing cancer.Precautionary StatementsPrevention:Obtain special instructions before use.Do not handle until all safety precautions have been read and understood.Wear protective gloves and eye/face protection.Response:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Immediately call a POISON CENTER or doctor/physician.IF exposed or concerned: Get medical advice/attention.Storage:Store locked up.Disposal:Dispose of contents/container in accordance with applicable local/regional/national/international regulations. Notes to Physician:Not applicable2.3. Hazards not otherwise classifiedNone.8% of the mixture consists of ingredients of unknown acute oral toxicity.52% of the mixture consists of ingredients of unknown acute dermal toxicity.*The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret.4.1. Description of first aid measuresInhalation:Remove person to fresh air. If you feel unwell, get medical attention.Skin Contact:Wash with soap and water. If signs/symptoms develop, get medical attention.Eye Contact:Immediately flush with large amounts of water for at least 15 minutes. Remove contact lenses if easy to do. Continue rinsing. Immediately get medical attention.If Swallowed:Rinse mouth. If you feel unwell, get medical attention.4.2. Most important symptoms and effects, both acute and delayedSee Section 11.1. Information on toxicological effects.4.3. Indication of any immediate medical attention and special treatment requiredNot applicable5.1. Suitable extinguishing mediaIn case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.5.2. Special hazards arising from the substance or mixtureNone inherent in this product.Hazardous Decomposition or By-ProductsSubstance ConditionCarbon monoxide During CombustionCarbon dioxide During CombustionOxides of Nitrogen During CombustionOxides of Antimony During Combustion5.3. Special protective actions for fire-fightersNo unusual fire or explosion hazards are anticipated.6.1. Personal precautions, protective equipment and emergency proceduresVentilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. Refer to other sections of this SDS for informationregarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment.6.2. Environmental precautionsAvoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water.6.3. Methods and material for containment and cleaning upContain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriatesolvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and followsafety precautions on the solvent label and SDS. Seal the container. Dispose of collected material as soon as possible.7.1. Precautions for safe handlingDo not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid release to the environment. Use personal protective equipment (gloves, respirators, etc.) as required.7.2. Conditions for safe storage including any incompatibilitiesKeep container tightly closed. Keep cool. Store away from heat. Store in a dry place.8.1. Control parameters Occupational exposure limitsAmerican Indust. Hygiene Assoc : American Industrial Hygiene AssociationChemical Manufacturer Rec Guid : Chemical Manufacturer's Recommended GuidelinesUS Dept of Labor -OSHA : United States Department of Labor -Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling8.2. Exposure controls8.2.1. Engineering controlsUse with appropriate local exhaust ventilation. Provide appropriate local exhaust ventilation on open containers.8.2.2. Personal protective equipment (PPE)Eye/face protectionSelect and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face protection(s) are recommended:Full Face ShieldIndirect Vented GogglesSkin/hand protectionSelect and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing.Gloves made from the following material(s) are recommended: Polymer laminateRespiratory protectionAn exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure:Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulatesFor questions about suitability for a specific application, consult with your respirator manufacturer.9.1. Information on basic physical and chemical propertiesGeneral Physical Form: LiquidOdor, Color, Grade: Smooth black liquid with pungent odor.Odor threshold No Data AvailablepH Not ApplicableMelting point Not ApplicableBoiling Point> 290 ºFFlash Point> 290 ºF [Test Method: Closed Cup]Evaporation rate No Data AvailableFlammability (solid, gas)Not ApplicableFlammable Limits(LEL)No Data AvailableFlammable Limits(UEL)No Data AvailableVapor Pressure< 27 psia [@ 131 ºF]Vapor Density No Data AvailableDensity No Data AvailableSpecific Gravity 1.29 [Ref Std: WATER=1]Solubility in Water NilSolubility-non-water No Data AvailablePartition coefficient: n-octanol/ water No Data AvailableAutoignition temperature No Data AvailableDecomposition temperature No Data AvailableViscosity5,500 centipoiseVolatile Organic Compounds No Data AvailableVOC Less H2O & Exempt Solvents No Data Available10.1. ReactivityThis material is considered to be non reactive under normal use conditions.10.2. Chemical stabilityStable.10.3. Possibility of hazardous reactionsHazardous polymerization will not occur.10.4. Conditions to avoidNone known.10.5. Incompatible materialsNone known.10.6. Hazardous decomposition productsSubstance ConditionNone known.Refer to section 5.2 for hazardous decomposition products during combustion.The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole.11.1. Information on Toxicological effectsSigns and Symptoms of ExposureBased on test data and/or information on the components, this material may produce the following health effects: Inhalation:Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing,nasal discharge, headache, hoarseness, and nose and throat pain.Skin Contact:Contact with the skin during product use is not expected to result in significant irritation.Eye Contact:Corrosive (Eye Burns): Signs/symptoms may include cloudy appearance of the cornea, chemical burns, severe pain, tearing, ulcerations, significantly impaired vision or complete loss of vision.Ingestion:May be harmful if swallowed.Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.Carcinogenicity:Contains a chemical or chemicals which can cause cancer.Toxicological DataIf a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification.Reproductive ToxicityTarget Organ(s)Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components.Ecotoxicological informationPlease contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components.Chemical fate informationPlease contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components.13.1. Disposal methodsDispose of contents/ container in accordance with the local/regional/national/international regulations.Incinerate uncured product in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes. As a disposal alternative, utilize an acceptable permitted waste disposal facility. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal facilities.EPA Hazardous Waste Number (RCRA): Not regulated15.1. US Federal RegulationsContact 3M for more information.311/312 Hazard Categories:Fire Hazard -No Pressure Hazard -No Reactivity Hazard -No Immediate Hazard -Yes Delayed Hazard -Yes Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No% by WtANTIMONY PENTAOXIDE (ANTIMONY1314-60-9 5 -10COMPOUNDS)15.2. State RegulationsContact 3M for more information.15.3. Chemical InventoriesThe components of this product are in compliance with the chemical notification requirements of TSCA.Contact 3M for more information.15.4. International RegulationsContact 3M for more information.NFPA Hazard ClassificationHealth:2 Flammability:1 Instability:0 Special Hazards:NoneNational Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also includethe toxic properties of combustion or decomposition products that are known to be generated in significant quantities.HMIS Hazard ClassificationHealth:2 Flammability:1 Physical Hazard:0 Personal Protection:X -See PPE section.Hazardous Material Identification System (HMIS® III) hazard ratings are designed to inform employees of chemical hazards in the workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergency situations. HMIS® III ratings are to be used with a fully implemented HMIS® III program. HMIS® is a registered mark of the American Coatings Association (ACA).Document Group:28-7666-2Version Number: 2.00Issue Date:02/19/14Supercedes Date: 06/24/11DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application.3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M3M USA SDSs are available at Safety Data SheetCopyright,2014,3M Company.All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2)neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group:28-7650-6Version Number: 3.00Issue Date:02/12/14Supercedes Date: 05/09/111.1. Product identifierScotchcast™Flame-Retardant Compound 2131 (Part A)Product Identification Numbers80-6114-6840-81.2. Recommended use and restrictions on useRecommended useElectrical, Part A of two part electrical resin1.3. Supplier’s detailsMANUFACTURER: 3MDIVISION: Electrical Markets DivisionADDRESS: 3M Center, St. Paul, MN 55144-1000, USATelephone:1-888-3M HELPS (1-888-364-3577)1.4. Emergency telephone number1-800-364-3577 or (651) 737-6501 (24 hours)2.1. Hazard classificationAcute Toxicity (inhalation): Category 3.Serious Eye Damage/Irritation: Category 2A.Skin Corrosion/Irritation: Category 2.Respiratory Sensitizer: Category 1.Skin Sensitizer: Category 1.Specific Target Organ Toxicity (respiratory irritation): Category 3.Specific Target Organ Toxicity (repeated exposure): Category 1.2.2. Label elementsSignal wordDangerSymbolsSkull and crossbones | Exclamation mark | Health Hazard |PictogramsHazard StatementsToxic if inhaled.Causes serious eye irritation.Causes skin irritation.May cause allergy or asthma symptoms or breathing difficulties if inhaled.May cause an allergic skin reaction.May cause respiratory irritation.Causes damage to organs through prolonged or repeated exposure:respiratory system |Precautionary StatementsPrevention:Do not breathe dust/fume/gas/mist/vapors/spray.Use only outdoors or in a well-ventilated area.In case of inadequate ventilation wear respiratory protection.Wear eye/face protection.Wear protective gloves.Do not eat, drink or smoke when using this product.Wash thoroughly after handling.Contaminated work clothing must not be allowed out of the workplace.Response:IF INHALED: Remove person to fresh air and keep comfortable for breathing.If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention.IF ON SKIN: Wash with plenty of soap and water.If skin irritation or rash occurs: Get medical advice/attention.Take off contaminated clothing and wash it before reuse.Call a POISON CENTER or doctor/physician if you feel unwell.Storage:Store in a well-ventilated place. Keep container tightly closed.Store locked up.Disposal:Dispose of contents/container in accordance with applicable local/regional/national/international regulations.2.3. Hazards not otherwise classifiedPersons previously sensitized to isocyanates may develop a cross-sensitization reaction to other isocyanates.21% of the mixture consists of ingredients of unknown acute oral toxicity.32% of the mixture consists of ingredients of unknown acute inhalation toxicity.*The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret.4.1. Description of first aid measuresInhalation:Remove person to fresh air. Get medical attention.Skin Contact:Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention.Eye Contact:Immediately flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. Get medical attention.If Swallowed:Rinse mouth. If you feel unwell, get medical attention.4.2. Most important symptoms and effects, both acute and delayedSee Section 11.1. Information on toxicological effects.4.3. Indication of any immediate medical attention and special treatment requiredNot applicable.5.1. Suitable extinguishing mediaIn case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.5.2. Special hazards arising from the substance or mixtureClosed containers exposed to heat from fire may build pressure and explode.Hazardous Decomposition or By-ProductsSubstance ConditionCarbon monoxide During CombustionCarbon dioxide During CombustionHydrogen Cyanide During CombustionOxides of Nitrogen During Combustion5.3. Special protective actions for fire-fightersNo unusual fire or explosion hazards are anticipated.6.1. Personal precautions, protective equipment and emergency proceduresEvacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. Observe precautions from other sections.6.2. Environmental precautionsAvoid release to the environment.6.3. Methods and material for containment and cleaning upContain spill. Pour isocyanate decontaminant solution (90% water, 8% concentrated ammonia, 2% detergent) on spill and allow to react for 10 minutes. Or pour water on spill and allow to react for more than 30 minutes. Cover with absorbent material. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a container approved for transportation by appropriate authorities, but do not seal the container for 48 hours to avoid pressure build-up. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and SDS. Cover, but do not seal for 48 hours. Dispose of collected material as soon as possible.7.1. Precautions for safe handlingFor industrial or professional use only. Do not use in a confined area with minimal air exchange. Do not breathedust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse.7.2. Conditions for safe storage including any incompatibilitiesStore in a well-ventilated place. Keep cool. Keep container tightly closed to prevent contamination with water or air. If contamination is suspected, do not reseal container. Protect from sunlight. Store away from heat. Store away from strong from areas where product may come into contact with food or pharmaceuticals. Store in a dry place.bases.Store awayOccupational exposure limitsAmerican Indust. Hygiene Assoc : American Industrial Hygiene AssociationChemical Manufacturer Rec Guid : Chemical Manufacturer's Recommended GuidelinesUS Dept of Labor -OSHA : United States Department of Labor -Occupational Safety and Health AdministrationTWA: Time-Weighted-AverageSTEL: Short Term Exposure LimitCEIL: Ceiling8.2. Exposure controls8.2.1. Engineering controlsUse general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. 8.2.2. Personal protective equipment (PPE)Eye/face protectionSelect and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face protection(s) are recommended:Indirect Vented GogglesSkin/hand protectionSelect and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing.Gloves made from the following material(s) are recommended: Butyl RubberFluoroelastomerPolymer laminateIf this product is used in a manner that presents a higher potential for exposure (eg. spraying, high splash potential etc.), then use of protective coveralls may be necessary. Select and use body protection to prevent contact based on the results of an exposure assessment. The following protective clothing material(s) are recommended: Apron –Butyl rubberApron -polymer laminateRespiratory protectionAn exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure:Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulatesFor questions about suitability for a specific application, consult with your respirator manufacturer.。
3M Scotch-Weld EPX Plus II 产品参考手册说明书
Stock #: 7000028616
✓✓Leabharlann UPC: 0-00-21200-97331-4 3M™ Scotch-Weld™ EPX™
Mixing Nozzle
7.5 Helical White, 200mL and 400mL
Stock #: 7000046633
UPC: 0-00-21200-87982-1
Stock #: 7100148766 UPC: 00-063806-01004-8
Bulk: 7100148756 Bulk: 00-063806-01005-5
3M™ EPX™ Pneumatic Applicator 48.5/50 mL
Stock #: 7100148769
UPC: 00-063806-01006-2
3M™ Scotch-Weld™ EPX™
✓✓
Mixing Nozzle 3.6 Square Green, 43mL/48.5mL
Stock #: 7100104991
Bulk: 7100148765
UPC: 0-00-76308-86434-7 Bulk: 0-00-63806-01003-1
N/A
✓ 3M™ Scotch-Weld™ EPX™ Mixing Nozzle 7.5 Helical White, 200mL and 400mL Stock #: 7000046633 UPC: 0-00-21200-87982-1
3M™ Scotch-Weld™ EPX™
Mixing Nozzle
3M™ Scotch-Weld™ EPX™ Mixing Nozzle 5.8 Helical White, 43mL Stock #: 7100034271 UPC: 0-00-51115-81449-5
3M高压绝缘胶带解读
?可再次拆装
?型号标准，便于快速安装
●应用
易发生故障的电缆（距离右18英寸以内）及其他缆
控制电缆
位于有火灾陷患处的附加绝缘，减少传送电弧的可能。
管道系统（如：输水、气、油管道）
●如何定购
在当地经销商可购到50.8mm的ScotchTM77#防火、抗电弧胶带，更宽的产品通过特殊订购可获得。
规格（宽*长*厚）:
25mm*5m*0.76mm
安装：
半重叠绕包2157胶带至需要的绝缘要求。绕包时拉伸胶带至原宽度的3/4，以保证得到
较好的重形性和防潮效果。在2157胶带外应再半重叠绕包3MPVC电气绝缘胶带作机械保护。
●24号屏蔽带
保持电缆静电屏蔽层的连续
如何使用:
绕包胶带于电力电缆相应部位即可
●产品描述
ScotchTM77＃防火、抗电弧胶带专为保护所有电缆而设计。它构成材料独特，能遇火膨胀，在火焰与电缆之间形成一层厚的炭聚积物，这道绝缘防火墙起到隔热层和防火板的作用，由此保护电缆或附件。
当电缆受到故障电弧（由故障产生的电弧）影响时，在保护装置切断故障线路之前，给所有临近的绕包好的电缆和附件良好的保护，由于该产品经弹性材料，从形性良好、安装都可更快、更方便地绕包于电缆和不规则形状的附件上。这种性能使安装者能更好的使用产品，以便形成均匀的覆盖面。该产品厚度薄，极大的减轻生量，可提供更好的保护，还能使电缆导体产生的热量更快散失。一层半重叠的绕包对大多数被包覆物有足够的保护作用，然而，在不减少电缆的负载情况下，若情况允许，可适当增加防火带。
规格(宽×长×厚):
25mm×4.5m
25mm×30.5m
●70自融性硅橡胶带
Scotch 3M胶带说明书
Scotch®Performance Flatback Tape3M2525Technical DataProduct Description Scotch®Performance Flatback Tape 2525 is used in holding, splicing or masking applications where high adhesion strength, high temperature capability and high backing strength are required.Typical PhysicalPropertiesNote: The following technical information and data should be considered representativeor typical only and should not be used for specification purposes.ASTM Test Method Adhesion to Steel: 69 oz./in. width (75 N/100 mm) D-3330Tensile Strength: 49 lbs./in. width (858 N/100 mm) D-3759 Elongation at Break: 2% D-3759Tape Thickness: 9.5 mils (0.241 mm) D-3652 Temperature Use Range: Up to 300°F (149°C)Feature•Has excellent adhesion and backing strength levels and is resistant to moistconditions.•Can be used for applications where a colored backing is desired and willwithstand a bake cycle of 300°F (149°C) for one hour.•Not recommended for outdoor applications or prolonged periods of sunlightexposure as tape may become very difficult to remove.Application Ideas•Can be used in many holding, masking and splicing applications where a highvisibility tape is desired. It can also be used for various types of edging andbinding applications.StorageStore under normal conditions of 70°F (21°C) and 50% R.H. in the original carton.Shelf LifeTo obtain best performance, use this product within 12 months from date ofmanufacture.Product UsAll statements, technical information and recommendations contained in this document are based upontests or experience that 3M believ es are reliable. However, many factors beyond 3M’s control can affectthe use and performance of a 3M product in a particular application, including the conditions underwhich the product is used and the time and environmental conditions in which the product is expected toperform. Since these factors are uniquely within the user’s knowledge and control, it is essential that theuser evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for theuser’s method of application.Warranty andLimited RemedyUnless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individualproducts, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships theproduct. Individual products may have additional or different warranties as stated on product literature,package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OFDEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M productis fit for a particular purpose and suitable for user’s application. If the 3M product is defective within thewarranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, toreplace the product or refund the purchase price.Limitation of LiabilityExcept where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theoryasserted, including warranty, contract, negligence or strict liabilityThis Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001:2000 standards。
3M Scotch-Weld DP270电子部件潮湿封封闭胶水说明说明书
Scotch-W eld TMEpoxy Potting Compound/AdhesiveDP270 Clear and BlackTechnical Data March 2019Product Description 3M TM Scotch-Weld TM Epoxy Potting Compound/Adhesive DP270 (or 3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive 270 B/A) is a two-part, low viscosityepoxy resin system designed primarily for potting, sealing, and encapsulation ofmany electronic components and is available in clear or black. 3M™ Scotch-Weld™epoxy potting compound/adhesive DP270 is noncorrosive to copper and offers goodthermal shock resistance and excellent retention of electrical insulation propertiesunder high humidity conditions.3M™ Scotch-Weld™ epoxy potting compound/adhesive DP270 has a work lifeof approximately 70 minutes, a tack-free time of about 3 hours and is fully curedafter 48 hours at 73°F (23°C). This product produces no exotherm in 5-10 grammasses and a very slight exotherm in larger masses.3M™ Scotch-Weld™ epoxy potting compound/adhesive DP270 is ideal for thepotting and encapsulation of many heat sensitive or delicate components such asglass diodes and sensors as well as for transformers, coils, chokes, relays, etc. It isavailable in the convenient 3M™ EPX Applicator System for multi-station usageand in bulk containers for larger volume applications.Available in bulk containers as Scotch-Weld epoxy potting compound/adhesive270 B/A.Features •Good Thermal Shock Resistance •Excellent Electrical Properties•Meets UL 94 HB (File No. E61941) •Noncorrosive to Copper•Long Worklife •Negligible ExothermTypical Uncured Properties Note: The following technical information and data should be considered representative3M ™ Scotch-W eld ™Epoxy Potting Compound/Adhesive DP270 Clear and Black- 2 -Typical Cured PropertiesNote: The following technical information and data should be considered representativeor typical only and should not be used for specification purposes.3M ™ Scotch-W eld ™Epoxy Potting Compound/Adhesive DP270 Clear and Black- 3 -D i s s i p a t i o n F a c t o rL o g o f R e s i s t a n c e (1 x 10 o h m s )*D i e l e c t r i c C o n s t a n tAdditional Electrical PropertiesNote: The following technical information and data should be considered representative ortypical only and should not be used for specification purposes.Dissipation Factor Versus Frequency Dielectric Constant Versus Frequency.030.025.020.015 3.83.63.43.2.010100Hz1 KHz10 KHz 100 KHz1 MHzFREQUENCY 3.0100Hz1 KHz10 KHz 100 KHz1 MHzFREQUENCYInsulation Resistance .8 mm/.8 mm Comb Pattern 60°C (140°F)/95% RH/100 V d.c.15141312112004006008001000HOURS1200*The numbers on the vertical axis represent the exponential power onthe 1 x 10 ohm notation.3M ™ Scotch-W eld ™Epoxy Potting Compound/Adhesive DP270 Clear and Black- 4 -Typical CuredProperties (continued)Note: The following technical information and data should be considered representativeor typical only and should not be used for specification purposes.Corrosion:Per ASTM D-3482(35°C/95°F/96% R.H./45V d.c./15 days) Pass - No copper corrosion Per 3M T est Method C-708(45°C/113°F/96% R.H./250V d.c./5 days) Pass - No copper corrosion (65°C/149°F/96% R.H./250V d.c./4 days) Pass - No copper corrosion Per Mil S-46163(10 days/50% R.H./23°C/73°F)Pass - No aluminum, brass or steel discoloration or corrosionSolvent Resistance:(Visual check after immersion in specified solvent at 23°C (73°F)Acetone1 Hour B 1 Month C Isopropyl Alcohol A B Freon TF A A Freon TMCB C 1,1,1-T richloroethane A C RMA FluxA BKey: A - UnaffectedB - Slight AttackC - Moderate/Severe AttackTypical Adhesive Performance CharacteristicsNote: The following technical information and data should be considered representativeor typical only and should not be used for specification purposes.Although 3M ™ Scotch-Weld ™ Epoxy Potting Compound/Adhesive DP270 and 270 B/A can be used for many potting and encapsulation applications, they can also be used as adhesives. The following shows typical shear and peel values determined on several common substrates:Overlap Shear Adhesion (ASTM D-1002-72)90° T-Peel Adhesion (ASTM D-1876-61T)Compression Strength (ASTM D-695-68T)3M ™ Scotch-W eld ™Epoxy Potting Compound/Adhesive DP270 Clear and Black- 5 -3M ™ EPXPneumatic Applicator Delivery Rates200 ml Applicator – Maximum Pressure 58 psi48.5/50 ml Applicator – Maximum Pressure 50 psi*Tests were run at a temperature of 70°F ± 2°F (21°C ± 1°C) and at maximum applicator pressure.Handling/Curing InformationDirections for Use1. For high strength structural bonds, paint, oxide films, oils, dust, mold release agents and all other surface contaminants must be completely removed. However, the amount of surface preparation directly depends on the required bond strength and the environmental aging resistance desired by user. For specific surface preparations on common substrates, see the section on surface preparation.2. These products consist of two parts.MixingFor Duo-Pak Cartridges3M™ Scotch-Weld ™ epoxy potting compound/adhesive DP270 Clear and Black are supplied in a dual syringe plastic duo-pak cartridge as part of the 3M ™ EPX Applicator systems. To use, simply insert the duo-pak cartridge into the EPX applicator and start the plunger into the cylinders using light pressure on the trigger. Next, remove the duo-pak cartridge cap and expel a small amount of adhesive to be sure both sides of the duo-pak cartridge are flowing evenly and freely. If mixing of Part A and Part B is desired, attach the EPX applicator mixing nozzle to the duo-pak cartridge and begin dispensing the adhesive. For hand mixing, expel the desired amount of material and mix thoroughly to obtain a uniform color.For Bulk ContainersMix thoroughly by weight or volume in the proportions specified in the typical uncured properties section to obtain a uniform color.3M ™ Scotch-W eld ™Epoxy Potting Compound/Adhesive DP270 Clear and Black- 6 -Handling/CuringInformation (continued)3. For maximum bond strength apply product evenly to both surfaces to be joined.4. Application to the substrates should be made within 70 minutes. Larger quantities and/or higher temperatures will reduce this working time.5. Join the adhesive coated surfaces and allow to cure at 60°F (16°C) or above until firm. Heat up to 200°F (93°C) will speed curing.6. The following times and temperatures will result in a full cure of these products.23°C (73°F) 48 Hours 50°C (122°F) 4 Hours 80°C (176°F) 60 Minutes 100°C (212°F)30 Minutes7. Keep parts from moving during cure. Contact pressure necessary. Maximum shear strength is obtained with a 3-5 mil bond line. 8. Excess uncured adhesive can be cleaned up with ketone type solvents*.*Note: When using solvents, extinguish all ignition sources, including pilot lights,and follow the manufacturer ’s precautions and directions for use.Adhesion Coverage: A 0.005 in. thick bondline will yield a coverage of320 sq. ft./gallonApplication andEquipment SuggestionsThese products may be applied by spatula, trowel or flow equipment.Two part mixing/proportioning/dispensing equipment is available for intermittent or production line use. These systems are ideal because of their variable shot size and flow rate characteristics and are adaptable to most applications.3M ™ Scotch-W eld ™Epoxy Potting Compound/Adhesive DP270 Clear and Black- 7 -Surface PreparationFor high strength structural bonds, paint, oxide films, oils, dust, mold release agents and all other surface contaminants must be completely removed. However, theamount of surface preparation directly depends on the required bond strength and the environmental aging resistance desired by user.The following cleaning methods are suggested for common surfaces:Steel1. Wipe free of dust with oil-free solvent such as acetone, isopropyl or alcohol solvents.*2. Sandblast or abrade using clean fine grit abrasives.3. Wipe again with solvent to remove loose particles.4. If a primer is used, it should be applied within 4 hours after surface preparation.Aluminum1. Alkaline Degrease: Oakite 164 solution (9-11 oz./gallon water) at 190°F ± 10°F (88°C ± 5°C) for 10-20 minutes. Rinse immediately in large quantities of cold running water.2. Acid Etch: Place panels in the following solution for 10 minutes at 150°F ± 5°F (66°C ± 2°C). Sodium Dichromate 4.1 - 4.9 oz./gallon Sulfuric Acid, 66°Be 38.5 - 41.5 oz./gallon 2024-T3 aluminum (dissolved) 0.2 oz./gallon minimum Tap water as needed to balance3. Rinse: Rinse panels in clear running tap water.4. Dry: Air dry 15 minutes; force dry 10 minutes at 150°F ± 10°F (66°C ± 5°C).5. If primer is to be used, it should be applied within 4 hours after surface preparation.Plastics/Rubber1. Wipe with isopropyl alcohol.*2. Abrade using fine grit abrasives.3. Wipe with isopropyl alcohol.*Glass1. Solvent wipe surface using acetone or MEK.*2. Apply a thin coating (0.0001 in. or less) of 3M ™ Scotch-Weld ™ Metal Primer EC3901 to the glass surfaces to be bonded and allow the primer to dry 60 minutes before bonding.*Note: When using solvents, extinguish all ignition sources, including pilot lights,and follow the manufacturer ’s precautions and directions for use.3M ™ Scotch-W eld ™Epoxy Potting Compound/Adhesive DP270 Clear and Black- 8 -StorageStore product at 60-80°F (16-27°C) for maximum storage life.Shelf LifeThese products when stored in original, unopened container have a shelf life of 18 months from date of manufacture.Precautionary InformationRefer to Product Label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501.Technical InformationThe technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information.Product Selection and UseMany factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to propertyWarranty,Limited Remedy, and DisclaimerUnless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3Mwarrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR APARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.Limitation of LiabilityExcept for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.ISO 9001: 2000This Industrial Adhesives and T apes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 standards.Industrial Adhesives and Tapes Division3M Center, Building 225-3S-06 St. Paul, MN 55144-1000800-362-3550 • 877-369-2923 (Fax) /structuraladhesives3M and Scotch-Weld are trademarks of 3M Company. ©3M 2015。
3M Scotchcast Electrical Resin 262 产品介绍说明书
002623M™ Scotchcast™ Electrical Resin 262 One-Part, Class B, General PurposeEpoxy Powder ResinProduct Description3M™ Scotchcast™ Electrical Resin 262 is a widely used, well-known general purpose epoxy powder resin. A one-part, red pigmented, rapid heat-curing product, it is designed to provide a continuous, tough moisture and chemical resistant dielectric coating to a variety of substrates.• Fast curing• Excellent electrical properties• Excellent thermal shock and impact resistance• Excellent heat, chemical and moisture resistance• Good cut-through resistance• Excellent flow Scotchcast Electrical resin 262 is manufactured by a fusion blend process, insuring that each individual particle of powder contains all the components necessary to effect a complete cure and attain stated performance properties.Scotchcast electrical resin 262 is applied to an object that has been heated to a temperature above the melting point of the resin. On contact with the preheated application surface, the resin melts, flows to a controlled extent, then cures, bonding to the substrate and coalescing into a smooth, continuous, essentially uniform, thick coating. It effectively coats flat surfaces and corners, as well as, high points. Uses for Scotchcast 262 include moisture proofing and insulating armatures, stators, buss bars and toroid cores.Scotchcast™ Electrical Resin 262 – Typical PropertiesColor RedSpecific Gravity1 (cured) 1.34Dielectric Strength3 12 to 15 mil coating1000 v/milThermal Shock2 10 cycles-75°C to 155°C12 -15 mil coating 1/8’’ sandblasted steel PassesImpact Resistance212-15 mil coating 1/8’’ sandblasted steel panel Gardner 5/8’’ RadiusImpact Tester100 inch-lbsCut-Through Resistance2 – 1lb wt: 1/8 AWG wire130°C (266° F)Edge Coverage2 12-15 mil coating on flat38-48%Gel time2 @ 193°C hot plate12-16 seconds*Not recommended for specification purposes. Product specifications will be provided upon request.Test Methods1 ASTM D-7922 3M Test Method3 ASTM D-14933Corrosion Protection Products Division6801 River Place Blvd. Austin, TX 78726-9000 /corrosion Please recycle. Printed in USA.© 3M 2010. All rights reserved. 80-6111-0945-7 Rev AHandling and Safety PrecautionsRead all Health Hazard, Precautionary and First Aid,Material Safety Data Sheet, and/or product label prior to handling or use.Ordering Information/Customer ServiceFor ordering technical or product information, or a copy of the Material Safety Data Sheet, call:Phone: 800/722-6721 or 512/984-9393Fax: 877/601-1305 or 512/984-6296Important NoticeAll statements, technical information, and recommendations related to 3M’s prod-ucts are based on information believed to be reliable, but the accuracy or com-pleteness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.Warranty; Limited Remedy; Limited Liability. Because conditions of product use are outside of our control and vary widely, the following is made in lieu of all express or implied warranties: this product will conform to 3M’s published product specifications and be free from defects in material and manufacture on the date of your purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective upon your receipt, your exclusive remedy shall be, at 3M’s option, to replace the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.Usage InformationMethod of ApplicationThe rapid cure of 3M™ Scotchcast™ Electrical Resin 262 permits the use of highspeed production methods. The powder can be readily applied by spraying techniques as well as through the use of fluid bed dipping of preheated parts. Automated and manual types of application equipment are both available. Equipment manufacturers’ names can be suggested upon request.CuringThe cure of Scotchcast 262 to a thermoset condition involves a time-temperature relationship. The retained heat in application units having high heat capacity is sufficient in many casesto effect a cure of the resin without the need for post-curing facilities. For example, if an application surface can retain a temperature of 204° C (400° F) for 60 seconds after coating, it will be fully cured. Small articles, or those with a large surface-to-mass ratio, lose heat rapidly and may require a higher preheat temperature and/or additional oven- curing.The figures below represent nominal guidelines for obtaining the resin’s adhesion, impact and chemical resistance characteristics.149° C (300° F)40 minutes177° C (350° F)20 minutes204° C (400° F)60 seconds232° C (450° F)30 secondsThe user must determine the time required for the coated substrate to reach listed temperatures.Preheat Temperature RangePrior to applying Scotchcast electrical resin 262, the part must be preheated to a temperature ranging from 150° C (302° F) to 260° C (500° F). The optimum preheat temperature depends upon the size, heat capacity and configuration of the object to be coated, as well as the method of application. The ideal coating temperature will vary for each application and is best determined by experimentation.StorageLaboratory evaluation indicates that the usable shelf life of the product is twenty four (24) months from the date of manufacture when stored at temperatures not exceeding 27° C (80° F), providing the material is stored in its original container. Care should be taken when removing the resin from the original container to prevent inclusion of foreign material. After the resin removal, the bag should be retied immediately. This will help to avoid agglomeration caused by excess moisture. For best results, store in a cool, dry place.00262。
3M Scotch-Brite 清洁与光泽调整板L2技术数据表示C, 九月2021说明书
L2 Product Name (variable)Quick LinksFacilities WebsiteSafety Data Sheets (SDS)Some of these links lead to web-based resources that are not product-specific.Product DescriptionThe Scotch-Brite™ Clean & Shine Pad is a low-speed (175-600 RPM) scrubber pad for daily cleaning and virtually dustless polishing.•Cleans and shines in the same step, using only a low-speed scrubber.•Increases shine with repeated use and may result in reduction or elimination of burnishing.•Designed with contrasting color to provide visible wear indication.•Usable on both sides with the same proprietary coating.Special Features•Exceptional cleaning, mark removal and shine improvement (gloss and/or distinctness of image) with water only.•Designed for use on both sides for ease of use and extended life.•Compatible with water, detergents, or cleaners normally used for floor maintenance.•Color contrast between pad interior and surface coating provides wear indication.ApplicationsThis product is used for routine cleaning or light scrubbing under an auto scrubber or other standard low speed (175-600 RPM) floor cleaning equipment using water or detergent solution.For use on most finish-coated or uncoated flooring including; vinyl, sheet vinyl, LVT, VCT, rubber, linoleum, ceramic tile, marble, terrazzo, granite and concrete.Packaging and MarkingEach carton shall be labeled to identify the contents by product name, size, quantity and manufacturer. Each pad shall be printed with the product name.Standard SizesCircular discs and rectangles are available in a variety of common sizes. Pads are nominally one inch thick.Pad Use and CleaningDust mop entire floor prior to cleaning. Install appropriate sized Clean & Shine pad/s on your cleaning equipment. If using a rotary auto scrubber, a center hub attachment is required. Fill the scrubber tank with water or properly diluted cleaning solution. Clean floor.Pads may be rinsed with water to remove soil and debris as needed.StorageStore indoors in original packaging and under normal facility conditions.Product CharacteristicsThe Scotch-Brite™ Clean & Shine Pad is certified by Green Seal® for EnvironmentalInnovation based on a design for significantly improved initial performance compared to competitive products, extending the useful lifeof the floor pad and reducing solid waste generationScotch-Brite™ Clean and Shine Test Method Fiber TypePolyester N/A Weight (4 in. by 6 in.)22 gN/A O.D. Dimension Designated Size ± 1/16 in.N/A Thickness 1 in. nominal CCD0002Aggressiveness N/ACCD0020Packaging Recycle Content50-100% postconsumer recycled materialN/A© 3M 2021. All rights reserved.3M and Scotch-Brite are the trademark of 3M. Used under license in Canada.All other trademarks are property of their respective owners.Revision C, September 2021 Please recycle.Commercial Solutions3M Center, Building 220-12E-04St. Paul, MN 551441-800-626-8578/Facilityresult in serious injury or death.result in serious injury or deathexposure to contaminants:• DO NOT use this product on any asbestos-containing material.exposure to contaminants:• Ensure this product is used in the recommended applications with the suggested equipment.• Do not allow this product to be used by untrained operators.• Always follow standard safety practices, includingwearing appropriate protective apparel and eye protection, while using this product.Health and Safetymanufacturers' container labels and the Safety Data Sheets (SDS) for important health, safety and environmental information. To obtain SDS sheets for 3M products go to /SDS , or by mail or in case of an emergency, call 1- 888-364-3577 or 1-651-737-6501.When using any equipment, always follow the manufacturers' instructions for safe operation.Technical InformationThe technical information, guidance, and other statementscontained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. If you have questions about this Product, contact the Customer Service Department at 1-800-626-8578.Product Selection and UseMany factors beyond 3M's control and uniquely within user'sknowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer's application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property.Warranty, Limited Remedy, and DisclaimerUnless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES ORCONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price.Limitation of LiabilityExcept for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss ordamage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.。
工程修复材料-3M
P3
金属冷焊材料系列
可快速修复各种金属表面并进行机加工，适 用于表面缺陷和磨损面划伤、裂缝等，如铸 造缺陷、轴磨损、轴瓦、液压杆、机床导轨、法 兰等。还可用于各种管、罐、阀等应急堵漏。
产品系列： 金属冷焊材料 RG501—应急修补、快速
堵漏材料 金属冷焊材料 EG503—高性能分子合金
复合材料 金属冷焊材料 FG502—金属表面刷涂修复
应用领域
PR绷带应急修复泄漏管道
冷焊材料修复变压器
修复前 万能补SG修补泄漏管道后前
修复后
修复前
修复后
管壁损失30%运用加强带配合冷焊材料EG修复
管
修复前
修复后
修复前
修复后
道
紧
加强带配合冷焊材料修复铜管 橡胶修复材料75RG修复橡胶软管
油管漏洞运用加强带配合万能补SG和冷焊材料EG修复
急
修
复
材
料
系
列
FG514
表
体积比(基料:固化剂)
3:1
3:1
3:1
2:1
4:1
3:1
3:1
面
重
重量比(基料:固化剂)
5:1
8:1
4:1
3.7:1
5:1
3:1
3:1
塑
材
固化时间（20℃）
料
系
混合后使用期
25分钟
25分钟
30分钟
45分钟
45分钟
20分钟
20分钟
列0分钟
6小时
6小时
2小时
2小时
可机加工时间
金属冷焊XG509
175 2500 560 8000 700 10000
3M Scotch-Weld结构粘合剂产品介绍说明书
Battery Bonding GuidePushing beyond limitsis what bonds us.3M™ Scotch-Weld™ Structural Adhesives are what bond thousands of diverse and demanding applications in hundreds of industries, spanning more than 60 years. From aerospace to automotive, from electronics and appliances, manufacturing industries of transformative innovation have been fueled in part with the assured reliability of 3M™ Scotch-Weld™ Structural Adhesives.As a global provider and innovator of adhesive and tape bondingsolutions, 3M remains uniquely positioned to help solve evolvingdesign challenges. Our 3M Global Adhesive Solution Labs allowus to help our customers with development, modeling, testingand technology for bonding solutions, and dispensingapplications for manufacturability.Advancing next-generation power supplies.As technologies converge, requiring greater capacity, connectivity, transportability and sustainability, the demands for high-density portable power have never been greater. 3M understands the challenges facing customers, including reducing battery weight, enhancing reliability and life, managing thermal requirements, ensuring safety, and facilitating manufacturability. With decades of experience and a leading array of solutions, 3M is equipped to help deliver on your innovation.Elevate your design with proven bonding solutions.3M solutions for battery bonding offer:• Product formulations ranging from low-viscosity adhesives, non-sag options, gap fillers, sealants,thin bond tapes and 3M™ VHB™ Tapes.• High-performance characteristics such as faster cure times including no-heat cure cycles, reducedor zero surface preparation, low odor and non-flammable bonding. • Application engineering, automation knowledge and testing capabilities, design lab resources tocreate better products, plus global supply chain availability to keep production flowing smoothly.From next-generation electrochemical cells for increasingly powerful mobile products to large-scale, high-voltage battery systems for Electric and Hybrid Electric Vehicles, few application areas are as demanding for adhesives as battery bonding. 3M™ Scotch-Weld™ Structural Adhesives offer advanced solutions for bonding dissimilar materials, and our expertise helps you apply them.3M TMVHB TM T ape3MTMScotch-Weld TM Structural Adhesives3M TM High Performance Label Materials3M TM Sealants3M TMScotch-Weld TM Structural Adhesives3M TMVHB TM T ape3M TM Thin Bond T apesThermally Conductive Gap FillerA p p l i c a t i o nP r o d u c t s3M™ Scotch-Weld™ Structural Adhesives Urethane: DP6310NS/DP6330NSFlexible epoxy: DP1253M™ Scotch-Weld™ Structural Adhesives Flexible epoxy: DP1253M™ Scotch-Weld™ Structural AdhesivesT oughened epoxy: DP420/DP4603M™ Scotch-Weld™ Structural Adhesives Urethane: DP6310NS/DP6330NSKey Markets/Industries (Industrial/Electronics/Portable)-General Industrial global battery/charger manufacturing-Transportation: automotive, commercial vehicles, specialty vehicles (i.e. agricultural, forklifts, etc.)-Telecommunications -Energy Storage Systems -Lawn, Garden & T ools-Electronics: laptops, mobile, tablets Type of applicationsAcross battery pack and module designs for a variety of configurations, applications andoperating conditions, 3M™ Scotch-Weld™ Structural Adhesives meet the most demanding bonding, filling and sealing requirements.3M offers specialized understanding and experience for bonding of cells in cylindrical, prismatic and pouch configurations, and we meet requirements specific to your unique application and substrates to ensure reliable operation, durability and bond integrity.Key markets and applications.-Tension rod & pressure or end plate bonding-Battery box bonding (from reinforcement bars to entire box)-Crash box bonding-Lid to battery box sealing -Cell to frame bonding -Battery tray bondingPrismatic Cell BondingCylindrical Cell BondingBattery assembly to housingBattery assembly to cooling plateBattery cell ormodule to side plate-Bonding & encapsulating cells -Potting cells-Cell to cell bonding-Bonding of thermal runaway materials -Cell to cooling plate bondingApplicationPossible 3M Solutions Features & BenefitsBattery AssemblyCell to cell (prismatic)DP6310NS/DP6330NS• High strength bonds • E xcellent water, humidity and chemical resistance• Room temperature or accelerated heat cure • E xcellent elongation & stress strain properties • Non-sag option• Bulk options for automated dispenseModule to module DP125• H igh strength bonds under expansion, contraction and limited movement • F lexible bond for vibration and shock resistance • E xcellent water, humidity and chemical resistance• Bulk options for automated dispenseBattery Box AssemblySide plate and cover attachmentDP6310NS/DP6330NS• High strength bonds • E xcellent water, humidity and chemical resistance• Room temperature or accelerated heat cure • Excellent elongation & stress strain properties • Non-sag option• Bulk options for automated dispense DP8010/DP8010NS• Limited surface prep• Low surface energy bonding • R esists many chemicals, water, humidity and corrosion• Non-sag option• Bulk options for automated dispenseTS230• Fast set time • H igh strength bonds that are plasticizer resistant • Bulk options for automated dispenseBattery cover trim assembly TS230• Fast set time • H igh strength bonds that are plasticizer resistant • Bulk options for automated dispense DP8010/DP8010NS• Limited surface prep• Low surface energy bonding • R esists many chemicals, water, humidity and corrosion• Non-sag option• Bulk options for automated dispenseStiffener and tension rod bonding DP125• H igh strength bonds under expansion, contraction and limited movement • F lexible bond for vibration and shock resistance • E xcellent water, humidity and chemical resistance • B ulk options for automated dispensePerformance characteristics you can count on.3M structural adhesive products offer industry-leading selection and the largest levels of consistent, reliable performance to satisfy a host of essential characteristics in battery bonding applications.Application Possible 3M Solutions Features & BenefitsStiffener and tension rod bonding DP420/DP420NS/DP420LH•E xcellent environmental, vibration and shockresistance•H igh peel & shear strength for lasting bond in highand low temp•R oom temperature or accelerated heat cure•N on-sag & low halogen options•B ulk options for automated dispenseDP8407NS•L imited surface preparation•S trong bonds with broad temperature range•F ast cure time•B ulk options for automated dispenseCell to Frame BondingPrismatic cells DP420/DP420NS/DP420LH•E xcellent environmental, vibration and shockresistance•H igh peel & shear strength for lasting bond in highand low temp•R oom temperature or accelerated heat cure•N on-sag & low halogen options•B ulk options for automated dispenseDP125•H igh strength bonds under expansion, contractionand limited movement•F lexible bond for vibration and shock resistance•E xcellent water, humidity and chemical resistance•B ulk options for automated dispense Cylindrical cells DP125•H igh strength bonds under expansion, contractionand limited movement•F lexible bond for vibration and shock resistance•E xcellent water, humidity and chemical resistance•B ulk options for automated dispenseThermal Management SystemsBattery tray bonding DP420/DP420NS/DP420LH•E xcellent environmental, vibration and shockresistance•H igh peel & shear strength for lasting bond in highand low temp• Room temperature or accelerated heat cure• Non-sag & low halogen options• Bulk options for automated dispenseDP8407NS•L imited surface preparation•S trong bonds with broad temperature range•F ast cure time•B ulk options for automated dispenseDP8010/DP8010NS• Limited surface prep• Low surface energy bonding•R esists many chemicals, water, humidity andcorrosion• Non-sag option• Bulk options for automated dispenseBattery Bonding Product SelectionProduct Name Product #Color Approx.Viscosity at 75° F Approx.MixedWork Lifeat 75°CSize UPC Stock #3M™ Scotch-Weld™ Multi-Material Composite Urethane DP6310NS Green Non-sag paste9 mins48.5 mL400 mL5 gal - Part A5 gal - Part B50 gal - Part A50 gal - Part B00-076308-86407-100-076308-86398-200-076308-86782-900-076308-86748-500-076308-86783-600-076308-86749-27100109829710010983071001439607100143915701041531670104121993M™ Scotch-Weld™ Multi-Material Composite Urethane DP6330N S Green Non-sag paste30 min s48.5 mL400 mL5 gal - Part A5 gal - Part B50 gal - Part A50 gal - Part B00-076308-86431-600-076308-86433-000-076308-86780-500-076308-86701-000-076308-86781-200-076308-86727-07100109828710010982771001439617100143701701040961170103661453M™ Scotch-Weld™ T oughened Epoxy DP420Black30,00020 mins50 mL200 mL400 mL1 gal kit5 gal - Part A5 gal - Part B55 gal - Part A55 gal - Part B00-638060-08966-800-021200-41530-200-021200-41529-600-051115-25796-400-021200-41532-600-021200-41531-900-021200-41534-000-021200-41533-3710014873171000079567100077148700004638170000008347000000827701036596770103097503M™ Scotch-Weld™ T oughened Epoxy DP420NS Black180,00020 mins50 mL200 mL400 mL5 gal - Part A5 gal - Part B55 gal - Part A55 gal - Part B00-638060-08987-300-021200-39286-300-021200-39287-000-021200-31309-700-021200-56587-800-048011-58133-000-048011-58132-371001487587100036943710001068070000008577000000853710016035271001603343M™ Scotch-Weld™ T oughened Epoxy DP420Off-White30,00020 mins50 mL200 mL400 mL5 gal - Part A5 gal - Part B00-638060-08978-100-021200-87832-900-021200-87833-600-021200-82239-100-021200-82238-4710014873671000771367100002516710000114471000011453M™ Scotch-Weld™ T oughened Epoxy DP420LH Off-White30,00020 mins200 mL400 mL00-051111-07697-200-051111-07696-5701032955071000753363M™ Scotch-Weld™ Flexible Epoxy DP125Gray52,50025 mins48.5 mL200 mL400 mL5 gal - Part A5 gal - Part B00-638060-08985-900-032300-87844-200-021200-87845-900-021200-87218-100-021200-87217-4710014873570001212647100076727710008458871000845383M™ Scotch-Weld™ Flexible Epoxy Clear DP125Trans-lucent15,00025 mins48.5 mL200 mL400 mL00-638060-08983-500-021200-87842-800-021200-87843-57100148734710002541970001212623M™ Scotch-Weld™ Acrylic Adhesive DP8407Gray20,0007 mins45 mL490 mL1 gal - Part A1 gal - Part B55 gal - Part A55 gal - Part B00-638060-14631-600-638060-14643-900-638060-14658-300-076308-86306-700-638061-14659-000-076308-98878-47100179482710017948071001792647100105384710017944271001049873M™ Scotch-Weld™ Acrylic Adhesive DP8410NS Green70,00010 mins45 mL490 mL1 gal - Part A5 gal - Part A5 gal - Part B55 gal - Part B00-051115-70994-400-051115-70995-100-051115-68981-900-051115-70997-500-051115-68980-200-051115-71101-5710002405571000240457100102180710008453271001015067100084535Continued on next pageIndustrial Adhesives & Tapes Division3M CenterBuilding 225-3S-06St. Paul, MN 55144-10001-800-362-3550/structuraladhesives3M and Scotch-Weld are trademarks of 3M Company. Please recycle. Printed in USA.© 2020 3M. All rights reserved.Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property.Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXP RESS OR IMP LIED, INCLUDING, BUT NOT LIMITED TO, ANY IMP LIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A P ARTICULAR P URP OSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.The 3M legacy in structural adhesives is built upon listening and problem-solving. Our bonding solutions can help provide greater design freedom, reduce parts and weight, enhance performance while reducing labor and material costs.3M supports our customers with the testing, technology, and training needed to create better products. Our worldwide support staff has the experience you can rely on for everything from structural adhesive selection and process improvement to help with automation and dispensing.These are just a few of the ways we connect our technology to your ideas. Science is what bonds us. Let us show you how 3M can help make your products better.Science. The 3M Difference.Battery Bonding Product Selection, cont.April 2020。
3M 243011、243012、246506、243238、243382、289843、25735
- 适用于建筑涂料和涂层的应用 -以下为针对本设备的设置、使用、接地、维护及修理的警告。
惊叹号标志表示一般性警告，而各种危险标志则表示与特定的操作过程有关的危险。
请参考这些警告。
在本手册的其它适当地方还会有另外的与特定产品有关的警告。
皮肤注射危险从喷枪、软管泄漏处或破裂的部件射出的高压流体会刺破皮肤。
伤势看起来会象"只划了一小口，其实是严重受伤，可能导致肢体切除。
应即刻进行手术治疗。
•不要将喷枪指着任何人或身体的任何部位。
•不要将手放在喷嘴上。
•不要用手、身体、手套或抹布去堵住或挡住泄漏部件。
•不要在没有安装喷嘴护罩及扳机护圈的情况下进行喷涂。
•不喷涂时要锁上扳机锁。
•在停止喷涂时以及在清洗、检查或维修设备之前，要按照本手册的泄压步骤进行。
火灾和爆炸危险易燃气体，如溶剂及涂料烟雾在工作区内容易点燃或爆炸。
为防止起火和爆炸：•仅在通风良好的地方使用此设备。
•清除所有火源，如引火火焰、烟头、手提电灯及塑胶遮蔽布（可产生静电火花）。
•保持工作区清洁，无溶剂、碎片、汽油等杂物。
•存在易燃烟雾时不要插拔电源插头或开关电源或电灯。
•将工作区内的所有设备接地。
参见接地说明。
•只能使用已接地的软管。
•朝桶内扣动扳机时，要握紧喷枪靠在接地桶的边上。
•如果出现静电火花或感到有电击，要立刻停止操作。
在找出并纠正问题之前，不要使用设备。
•工作区内要始终配备有效的灭火器。
设备误用危险误用设备会导致严重的人员伤亡。
•疲劳时或在吸毒或酗酒之后不得使用此设备。
•不要超过额定值最低的系统部件的最大工作压力或温度额定值。
参见所有设备手册中的技术数据。
•请使用与设备的流体部件相适应的流体或溶剂。
参见所有设备手册中的技术数据。
阅读流体及溶剂生产厂家的警告。
有关涂料的完整资料，请向涂料分销商或零售商索要材料安全数据表（MSDS）。
•要每天检查设备。
已磨损或损坏的零部件要立刻修理或更换，只能使用生产厂家的原装替换用零部件进行修理或更换。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Material Safety Data SheetCopyright, 2008, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.PRODUCT NAME: SCOTCHCAST BRAND FLAME RETARDANT COMPOUND 2130 -DiscontinuedMANUFACTURER: 3MDIVISION: EADDRESS: 3M CenterSt. Paul, MN 55144-1000Issue Date: 1e: 11Ingredient C.A.S. No.% by Wt1,3-BUTADIENE, HOMOPOLYMER, HYDROXY-TERMINATED69102-90-520 -251,1'-METHYLENEBIS(ISOCYANATOBENZENE)26447-40-525 -3585507-79-510 -15 1,2-BENZENEDICARBOXYLIC ACID, DIUNDECYL ESTER, BRANCHEDAND LINEARBENZENE, 1,1'-METHYLENEBIS[ISOCYANATO-, HOMOPOLYMER39310-05-97 -12DECABROMODIPHENYL ETHER1163-19-5 5 -10GLYCOLS, POLYPROPYLENE25322-69-4 5 -10ANTIMONY TRIOXIDE1309-64-4 1 -3N,N-DI(2-HYDROXYPROPYL)ANILINE3077-13-2< 2DIPROPYLENE GLYCOL25265-71-8< 2ALUMINUM POTASSIUM SODIUM SILICATE12736-96-8< 2CASTOR OIL8001-79-4< 2CARBON BLACK1333-86-40.5 -12082-79-3< 0.5 HYDROCINNAMIC ACID, 3,5-DI-TERT-BUTYL-4-HYDROXY-,OCTADECYL ESTERMinute quantities of the substances listed below may be emitted during Normal Use:Substance ConditionIsocyanates Normal Use3.1 EMERGENCY OVERVIEWOdor, Color, Grade: PREPOLYMER:Hazy, amber liquid POLYOL:Black viscous liquidGeneral Physical Form: LiquidImmediate health, physical, and environmental hazards: Reacts violently with water. May cause allergic skin reaction. May cause allergic respiratory reaction. Contains a chemical or chemicals which can cause cancer. May cause target organ effects.3.2 POTENTIAL HEALTH EFFECTSEye Contact:Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.Vapors from heated material may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.Vapors released during curing may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.Skin Contact:Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.Inhalation:May be harmful if inhaled.Allergic Respiratory Reaction: Signs/symptoms may include difficulty breathing, wheezing, cough, and tightness of chest. Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.Prolonged or repeated exposure may cause:Respiratory Effects: Signs/symptoms may include cough, shortness of breath, chest tightness, wheezing, increased heart rate, bluish colored skin (cyanosis), sputum production, changes in lung function tests, and/or respiratory failure.May be absorbed following inhalation and cause target organ effects.Ingestion:Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.May be absorbed following ingestion and cause target organ effects.Target Organ Effects:Prolonged or repeated exposure may cause:Cardiac Effects: Signs/symptoms may include irregular heartbeat (arrhythmia), changes in heart rate, damage to heartmuscle, heart attack, and may be fatal.Liver Effects: Signs/symptoms may include loss of appetite, weight loss, fatigue, weakness, abdominal tenderness andjaundice.Blood Effects: Signs/symptoms may include generalized weakness and fatigue, skin pallor, changes in blood clotting time, internal bleeding, and/or hemoglobinemia.Kidney/Bladder Effects: Signs/symptoms may include changes in urine production, abdominal or lower back pain, increased protein in urine, increased blood urea nitrogen (BUN), blood in urine, and painful urination.Carcinogenicity:Contains a chemical or chemicals which can cause cancer.Ingredient C.A.S. No.Class Description RegulationANTIMONY TRIOXIDE1309-64-4Group 2B International Agency for Research on Cancer CARBON BLACK1333-86-4Group 2B International Agency for Research on Cancer CARBON BLACK EXTRACTS NONE Group 2B International Agency for Research on Cancer4.1 FIRST AID PROCEDURESThe following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed.Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical attention. Wash contaminated clothing and clean shoes before reuse.Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention.If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Get medical attention.5.1 FLAMMABLE PROPERTIESAutoignition temperature No Data AvailableFlash Point>=290 ºF [Test Method: Closed Cup] [Details: MITS data]Flammable Limits -LEL No Data AvailableFlammable Limits -UEL No Data Available5.2 EXTINGUISHING MEDIADO NOT USE WATER Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide).5.3 PROTECTION OF FIRE FIGHTERSSpecial Fire Fighting Procedures: Water or foam may cause frothing. See Hazardous Decomposition section for products of combustion. Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA).Unusual Fire and Explosion Hazards: Not applicable. No unusual fire or explosion hazards are anticipated.Accidental Release Measures:Observe precautions from other sections. Call 3M-HELPS line (1-800-364-3577) for more information on handling and managing the spill. Ventilate the area with fresh air. Avoid contact with water. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Collect as much of the spilled material as possible. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and MSDS. Collect the resulting residue containing solution. Place in a metal container approved for transportation by appropriate authorities. Cover, but do not seal for 48 hours. Dispose of collected material as soon as possible.7.1 HANDLINGAvoid contact with water to prevent potentially violent reaction or fire. Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Avoid contact with water. Avoid breathing of vapors, mists or spray. Do not breathe thermal decomposition products. Avoid skin contact with hot material. Avoid eye contact with vapors, mists, or spray. For industrial use only. Not intended for use as a medical device or drug. For industrial or professional use only. Avoid contact with oxidizing agents. Do not mix with oxidizers to avoid risk of explosion. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits. If ventilation is not adequate, use respiratory protection equipment.7.2 STORAGEKeep container in well-ventilated area. Do not heat under confinement to avoid risk of explosion Store away from areas where product may come into contact with food or pharmaceuticals. Store away from oxidizing agents. Store in a dry place.8.1 ENGINEERING CONTROLSProvide appropriate local exhaust when product is heated. Do not use in a confined area or areas with little or no air movement. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control mist, vapor, or spray. If ventilation is not adequate, use respiratory protection equipment.8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)8.2.1 Eye/Face ProtectionAvoid eye contact with vapors, mists, or spray.The following eye protection(s) are recommended: Indirect Vented Goggles.8.2.2 Skin ProtectionWear appropriate gloves, such as Nomex, when handling this material to prevent thermal burns. Avoid skin contact. Avoid skin contact with hot material.Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.Gloves made from the following material(s) are recommended: Butyl Rubber, Nitrile Rubber. The following protective clothing material(s) are recommended: Apron -Polyethylene ethylene vinyl alcohol.8.2.3 Respiratory ProtectionAvoid breathing of vapors, mists or spray.Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with OSHA regulations: Half facepiece or fullface pressure demand self-contained breathing apparatus. Consult the current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.8.2.4 Prevention of SwallowingDo not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.8.3 EXPOSURE GUIDELINESIngredient Authority Type Limit Additional InformationACGIH TWA0.005 ppm1,1'-METHYLENEBIS(ISOCYANATOBENZENE)OSHA CEIL0.02 ppm Table Z-11,1'-METHYLENEBIS(ISOCYANATOBENZENE)ANTIMONY COMPOUNDS ACGIH TWA, as Sb0.5 mg/m3ANTIMONY COMPOUNDS OSHA TWA, as Sb0.5 mg/m3 Table Z-1AANTIMONY TRIOXIDE ACGIH TWA, as Sb0.5 mg/m3ANTIMONY TRIOXIDE CMRG TWA, as Sb0.2 mg/m3CARBON BLACK ACGIH TWA 3.5 mg/m3 Table A4CARBON BLACK CMRG TWA0.5 mg/m3CARBON BLACK OSHA TWA 3.5 mg/m3 Table Z-1 DECABROMODIPHENYL ETHER AIHA TWA 5 mg/m3DECABROMODIPHENYL ETHER CMRG TWA 5 mg/m3FREE ISOCYANATES3M TWA0.005 ppmFREE ISOCYANATES3M STEL0.02 ppmCMRG TWA10 mg/m3HYDROCINNAMIC ACID, 3,5-DI-TERT-BUTYL-4-HYDROXY-, OCTADECYLESTERPOLYPROPYLENE GLYCOLS AIHA TWA, as aerosol10 mg/m3VEGETABLE OIL MISTS OSHA TWA, as mist10 mg/m3 Table Z-1ASOURCE OF EXPOSURE LIMIT DATA:ACGIH: American Conference of Governmental Industrial HygienistsCMRG: Chemical Manufacturer Recommended GuidelineOSHA: Occupational Safety and Health AdministrationAIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)Odor, Color, Grade: PREPOLYMER:Hazy, amber liquid POLYOL:Black viscous liquid General Physical Form: LiquidAutoignition temperature No Data AvailableFlash Point>=290 ºF [Test Method: Closed Cup] [Details: MITS data] Flammable Limits -LEL No Data AvailableFlammable Limits -UEL No Data AvailableBoiling point>=95 ºF [Details: MITS data]Vapor Density Not ApplicableSpecific Gravity 1.19 [Details: MITS data]pH Not ApplicableMelting point No Data AvailableEvaporation rate Not ApplicableVolatile Organic Compounds No Data AvailableVOC Less H2O & Exempt Solvents No Data AvailableViscosity8 -30 centipoise [@ 73.4000000000 ºF] [Details: MITS data]Stability:Stable.Materials and Conditions to Avoid: Amines; Alcohols; Water; Reaction with water, alcohols, and amines is not hazardous if container can vent to the atmosphere to prevent pressure buildup.Hazardous Polymerization: Hazardous polymerization will not occur.Hazardous Decomposition or By-ProductsSubstance ConditionCarbon monoxide During CombustionCarbon dioxide During CombustionHydrogen Cyanide Oxidative DegradationOxides of Nitrogen During CombustionECOTOXICOLOGICAL INFORMATIONNot determined.CHEMICAL FATE INFORMATIONNot determined.Waste Disposal Method: Incinerate in an industrial or commercial facility in the presence of a combustible material. As a disposal alternative, dispose of waste product in a facility permitted to accept chemical waste.ID Number(s):78-8046-9215-6, 80-6101-3293-0, 80-6112-0128-8, 80-6112-0147-8, 80-6112-0149-4, 80-6112-0152-8, 80-6112-0171-8US FEDERAL REGULATIONSContact 3M for more information.311/312 Hazard Categories:Fire Hazard -No Pressure Hazard -No Reactivity Hazard -Yes Immediate Hazard -Yes Delayed Hazard -YesSection 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No% by WtDECABROMODIPHENYL ETHER1163-19-5 5 -101309-64-4 1 -3ANTIMONY TRIOXIDE (ANTIMONYCOMPOUNDS)This material contains a chemical which requires export notification under TSCA Section 12[b]:Ingredient (Category if applicable) C.A.S. No Regulation StatusApplicable DECABROMODIPHENYL ETHER1163-19-5Toxic Substances Control Act (TSCA) 4 TestRule ChemicalsSTATE REGULATIONSContact 3M for more information.CALIFORNIA PROPOSITION 65Ingredient C.A.S. No.ClassificationCARBON BLACK EXTRACTS NONE**CarcinogenANTIMONY TRIOXIDE1309-64-4**CarcinogenCARBON BLACK1333-86-4**Carcinogen** WARNING: contains a chemical which can cause cancer.CHEMICAL INVENTORIESThe components of this product are in compliance with the chemical notification requirements of TSCA.All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS), or are exempt polymers whose monomers are listed on EINECS.Contact 3M for more information.INTERNATIONAL REGULATIONSContact 3M for more information.WHMIS: HazardousHMIS Hazard ClassificationHealth: 2 Flammability: 1 Reactivity: 1 Protection: X -See PPE section.Hazardous Material Identification System (HMIS(r)) hazard ratings are designed to inform employees of chemical hazards in the workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergency situations. HMIS(r) ratings are to be used with a fully implemented HMIS(r) program. HMIS(r) is a registered mark of the National Paint and Coatings Association (NPCA).Reason for Reissue: The MSDS has been revised because 3M has adopted the 16-section ANSI/ISO format. The potential hazards of the product have not changed. We encourage you to reread the MSDS and review the information.Revision Changes:Copyright was modified.Section 1: Trade name status was modified.Section 16: Reason for reissue heading was added.Section 16: Reason for reissue phrase was added.Section 14: ID Number Heading Template 1 was added.Section 14: ID Number(s) Template 1 was added.Section 2: Ingredient table was added.Section 15: TSCA section 12[b] text was added.Section 15: EPCRA 313 information was added.Section 15: EPCRA 313 text was added.Section 8: Exposure guidelines ingredient information was added.Section 15: TSCA section 12[b] information was added.Section 8: Exposure guidelines data source legend was added.Section 3: Carcinogenicity table was added.Section 3: Carcinogenicity heading was added.Section 15: California proposition 65 ingredient information was added.Section 15: California proposition 65 heading was added.Section 15: California proposition 65 cancer warning was added.DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application.3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.3M MSDSs are available at 。