TDA4858中文资料

合集下载

TDA4817中文资料

The TDA 4817 controls a boost converter as an active harmonic filter in a discontinuous (triangular shaped current) mode with variable frequency.
A typical application is in electronic ballasts, especially when a large number of such lamps are concentrated on one line supply point.
The operating state of the boost converter choke is sensed via the detector input. H-level means that the choke discharges and the output driver is inhibited. H-level sets a flip-flop, which stores the switch-off instruction of the current comparator to reduce susceptibility to interference. As soon as demagnetization is finished the choke voltage reverses and the detector input is set to L-level, thus enabling the output driver. This ensures that the choke is always currentless when the SIPMOS transistor switches on and that no current gaps appear.

TDA4951资料

A d r o n i c Co m p o n en t s TELEFUNKEN Semiconductors TV East/ West Correction Circuit for Square TubesTechnology: Bipolar Figure 1. Block diagramAbsolute Maximum RatingsParametersSymbol Value Unit Supply voltage Pin 6V S 35Supply current Pin 6I S 500Substrate current Pin 5–I 5400Power dissipation T case = 50°C P tot 500mW Storage temperature range T stg –25 to +150Junction temperatureT j–25 to +150Max.UnitA d r o n i c Co m p o n en t s G m b HTELEFUNKEN Semiconductors 3 (5)Figure 3. Test circuit 1Figure 4. Test circuit 3Figure 5. Test circuit 2Figure 6. Test circuit 4A d r o n i c Co m p o n en t s G m b HTELEFUNKEN Semiconductors4 (5)Figure 7. Test circuit 5Dimensions in mmPackage: 8-pin dual inlineA d r o n i c Co m p o n en t s G m b HTELEFUNKEN Semiconductors 5 (5)Ozone Depleting Substances Policy StatementIt is the policy of TEMIC TELEFUNKEN microelectronic GmbH to1.Meet all present and future national and international statutory requirements.2.Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs).The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances.TEMIC TELEFUNKEN microelectronic GmbH semiconductor division has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents.1.Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively2.Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA3.Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.TEMIC can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.We reserve the right to make changes to improve technical design and may do so without further notice .Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use TEMIC products for any unintended or unauthorized application, the buyer shall indemnify TEMIC against all claims, costs, damages, and expenses, arising out of,directly or indirectly, any claim of personal damage, injury or death associated with such unintended orunauthorized use.TEMIC TELEFUNKEN microelectronic GmbH, P.O.B. 3535, D-74025 Heilbronn, GermanyTelephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423。

TBT8854中文资料

Pigtailed PD for analog applicationTAP4NN3 seriesLong wavelength InGaAs PIN-PDDetection wavelength range of 1.1µmto 1.6µmSMF or MMF PigtailedSC, FC, ST, or LC ConnectorFamily ModelTAP4NN3 TZP4NN3 TBP4NN3FeaturesInGaAs long wavelength PIN photodiodeOperation at 1310nm & 1550nmHigh responsivity, low dark current and low capacitanceOperating temperature ; -40℃ to +85℃Single-mode fiber or multimode fiber pigtailed with SC or FC connectorDescriptionThe TxP4NN3 series is a reliable InGaAs PIN photodiode module pigtailed with SMF or MMF. The parts of pigtailed PD module – single-mode fiber, lens and photodiode - are actively aligned by high power YAG laser welding method. This packaging guarantees high detector responsivity and low deviation over a wide temperature range(0℃ to +70℃/-40℃ to +85℃), and provides high optical performance for ITU-T G.651 and G.652 standard optical fiber.. ApplicationsUsed in telecommunication and data communication systems, from medium to high speedfor intra-office, short-haul inter-office and long-haul inter-office applications.Analog application(for CATV Return Path-TAP4NN3, for CATV Forward Path-TZP4NN3, for Wireless fiber optic Repeater-TBP4NN3)SCM(Sub-Carrier Multiplexing) TransmissionSubscriber loopsPrivate optical networksAbsolute Maximum RatingsParametersSymbol Unit Min.Max.RemarksAmbient Operating Temperature T op ℃ -40 85 Outdoor use Storage Temperature T stg℃-40 85Reverse Voltage V RP V - 15/20/ Reverse Current I RP mA - 3/1 / Forward CurrentI FL mA - 50/2/ Lead Soldering Temp./Time℃/sec260/10Electrical & Optical Characteristics (T op = 25℃) ParametersSymbol Condition Unit Min.Typ.Max.RemarkDetection rangeλV R =5V , R>0.75R > 0.65µm1.1 1.6Responsivity R V R =5V ,λ=1.3µm V R =5V , λ=1.5µm A/W0.800.85 0.85 0.90Dark Current I DV R =5V nA 1.0Cut-off Frequency f c -3dB, V R =5V GHz 2/3R L =50ΩReverse Breakdown VoltageV BDV R =5V , I RD =1µAV 25/0 Capacitance C V R =5V , f=1MHzpF0.6Second-Order DistortionIMD2V R =12V ,P AVG =0dBm, OMI=0.4, Note1dBc-70TAP4NN31)TZP4NN32) TBP4NN33)Third-Order Distortion IMD3 Note 1dBc -75 TZP4NN32) TBP4NN33)Back Reflection IL dB -45 Active Area Diameter∅µm75/70 45for 2GHzfor 5GHzNote1-1) TAP4NN3 : Two-tone test condition : f1=13MHz, f2=19MHz, f1±f2Note1-2) TZP4NN3 : Two-tone test condition : f1=320MHz, f2=450MHz, f1±f2, λ=1550nm per channel Note1-3) TBP4NN3 : same as the Note1-2! Handling CautionThe Photo-diode can be damaged by overvoltage and current surges. Precautions should be taken for transient power supply.This device is susceptible to damage as a result of electrostatic discharge(ESD). Take proper precautions during both handling and testingBottom view2Pin DescriptionPin No. Symbol Description 1A PDPD anode2 K PD PD cathode3 GND CasegroundOutline Diagram- TAP4xx3-xxxH-- TAP4xx3-xxxNFig.4 Pigtailed PD Package Dimensions [unit: mm]Ordering Information- 220m with 62.5/125µm MMF @1.25Gbps - 500m with 50/125µm MMF @1.25Gbps - 200m with 62.5/125µm MMF @2.125Gbps *Note 2 ; additional order information- Connector type default is SC/PC and the default length of fiber is 1mMore InformationTeradian Inc.Address 946, Dunsan-dong, Seo-gu, Daejeon, 302-120, Korea Tel +82-42-476-4800, 4803(Oversea Sales Team) Fax +82-42-476-4805Homepage e-mail sales@Com panyDevice TypeWave-length Data rate (PIN-TIA)Volt. (TIA)PinTemp. Range FiberConne ctor FlangeT A P 4N N 3 -I S NHTera dian A ;PD for CATV Return pathZ ;PD for CATV Forward Path B ;PD forwireless repeaterP ;PIN T ;PIN-TIAA ;APD 4;1.3/1.5 8;850nmN ; None0; 51Mbps 1;155Mbps 4;622Mbps 8;1.25Gbps G ;2.5GbpsN ; None 3;3.3V 5;5V 3;3pin 4;4pin (diffe- rential) 5;5pin 6;4pin (single ended)I ;Indoor Use(0~70℃) O ;Outdoor Use(-40~85℃)S ;SMFM ;MMF N ;None S ;SC F ;FC T ;ST L ;LCN ; None V ;Vertical H ; Hori- zontal。

TDA4686中文资料

TDA4686
MAX. 8.8
UNIT V mA V V V V V V V V V V °C
70
ORDERING INFORMATION PACKAGE TYPE NUMBER NAME TDA4686 TDA4686WP DIP28 PLCC28 DESCRIPTION plastic dual in-line package; 28 leads (600 mil) plastic leaded chip carrier; 28 leads VERSION SOT117-1 SOT261-2
BLOCK DIAGRAM
பைடு நூலகம்
SDA
27 6-BIT D/A CONVERTER 19 cut-off control
RC
Philips Semiconductors
I2C-bus
I2C-BUS
leakage and cut-off current input
SCL
28
RECEIVER
BREN
TDA4686
1997 Jun 23
2
元器件交易网
Philips Semiconductors
Product speciﬁcation
Video processor with automatic cut-off control
QUICK REFERENCE DATA SYMBOL VP IP V8(p-p) V6(p-p) V7(p-p) V14 supply voltage (pin 5) supply current (pin 5) luminance input (peak-to-peak value) −(B − Y) input (peak-to-peak value) −(R − Y) input (peak-to-peak value) 3-level sandcastle pulse H+V H BK 2-level sandcastle pulse H+V BK Vi(p-p) Vo(b-w) Tamb RGB input signals at pins 2, 3, 4, 10, 11 and 12 (peak-to-peak value) RGB outputs at pins 24, 22 and 20 (black-to-white value) operating ambient temperature − − − − 0 2.5 4.5 0.7 2.0 − − − − − − − − 2.5 4.5 8.0 − − − PARAMETER − − − − MIN. 7.2 TYP. 8.0 60 0.45 1.33 1.05 − − − −

TDA4780中文资料

BANDGAP REFERENCE UGAP
R2 G2 B2
10 nF 10 nF 10 nF
R2 2 G2 3 B2 4 Y CLAMP INPUT SELECTOR Y - MATRIX Y ADAPTIVE BLACK ADBL YBL gamma Y BL R SATURATION ADJUST G B
FSW1 FSW2
peak dark storage 1 µF
Y - output / hue adjust output
VP = 8 V 200 µF
FSW1 13
FSW2 1
CPDST 18
YHUE 26
GND 9
VP 5
TDA4780
SUPPLY
YEXH R1 G1 B1 10 nF 10 nF 10 nF R1 10 G1 11 B1 12 CLAMP HUE ADJUST
元器件交易网
Philips Semiconductors
Preliminary speciﬁcation
RGB video processor with automatic cut-off control and gamma adjust
FEATURES • Gamma adjust • Dynamic black control (adaptive black) • All input signals clamped on black-levels • Automatic cut-off control, alternative: output clamping on fixed levels • Three adjustable reference voltage levels via I2C-bus for automatic cut-off control • Luminance/colour difference interface • Two luminance input levels allowed • Two RGB interfaces controlled by either fast switches or by I2C-bus • Two peak drive limiters, selection via • Blue stretch, selection via I2C-bus • Luminance output for scan velocity modulation (SCAVEM) • Extra luminance output; same pin can be used as hue control output e.g. for the TDA4650 and TDA4655 • Non standard operations like 50 Hz/32 kHz are also possible • Either 2 or 3 level sandcastle pulse applicable • High bandwidth for 32 kHz application • White point adjusts via I2C-bus • Average beam current and improved peak drive limiting • Two switch-on delays to prevent discoloration during start-up • All functions and features programmable via I2C-bus • PAL/SECAM or NTSC matrix selection. GENERAL DESCRIPTION The TDA4780 is a monolithic integrated circuit with a luminance and a colour difference interface for video processing in TV receivers. Its primary function is to process the luminance and colour difference signals from a colour decoder which is equipped e.g. with the multistandard decoder TDA4655 or TDA9160 plus delay line TDA4661 or TDA4665 and the Picture Signal Improvement (PSI) IC TDA467X or from a feature module. I2C-bus The required input signals are:

Fluke Calibration 8588A和8558A数字多功能电阻计说明书

The 8588A Reference Multimeter is the world’s most stable digitizing multi-meter. Designed for calibration laboratories, this long-scale high-precision reference multi-meter features superior accuracy and long-term stability over a wide measurement range, with an intuitive user interface and a color display.The 8588A delivers reliable and reproducible measurements with exceptional performance suitable for primary levellaboratories. With more than 12 measurement functions, includ-ing the new digitize voltage, digitize current, capacitance, RF power, and external shunts for dc and ac current, the 8588A helps you consolidate your lab’s cost of test into a single mea-surement instrument. Its superb analog performance is aug-mented by Fluke Calibration’s new high-speed system design and the industry’s fastest direct digitizing capability, enabling significant throughput increase for many automated systems demanding a combination of the highest speed and best accuracy.The 8588A holds the indus-try’s best one-year dc voltage accuracy of 2.7 uV/V at 95 % confidence interval, or3.5 uV /V at 99 %, and best 24-hour stability of 0.5 uV/V (95 %) or 0.65 uV/V (99 %),enabling it to outperform other long-scale reference multimeters on the market. The 8588A fur-ther pushes the speed envelope by producing a stable 8.5 digits reading in a mere one second.The 8588A platform consists of two models. The 8588A and 8558A both feature a common intuitive user interface with an easy-to-navigate menu struc-ture for all configurations and a set of matching SCPI-compliantcommands for automated envi-ronments. In addition, both models support a minimum of 100,000 readings per second at 4.5 digits across GPIB, USB or Ethernet.TECHNICAL DATA8588A Reference Multimeter8558A 8.5-Digit Multimeter8588A: The world’s most stable digitizing multimeterThe 8588A is designed for calibration and metrology laboratories that require the highest stability for the most accurate measurements to maintain maximum confidence in traceability.8558A: The industry’s fastest direct 5 mega-samples-per-second digitizing for system automation in labs and manufacturing test environmentsThe 8558A offers a subset of 8588A functions and features at an extremely competitive accuracy and speed performance.8588A key features and performanceDC voltage• 100 mV to 1000 V, (1050 V max)• 2.02x full scale• Maximum resolution: 1 nV • 2.7 μV/V (95 %) 3.5 µV/V (99 %), 1 year• 0.5 μV/V (95 %) 0.65 µV/V (99 %), 24 hour stability • 0 to 10 s reading aperture (200 ns resolution)DC current• 10 uA to 30 A• 2.02x full scale• Maximum resolution: 1 pA • 6.5 µA/V (95 %), 8.4 µA/V (99 %), 1 year• 0 to 10 s reading aperture (200 ns resolution)AC voltage• 10 mV to 1000 V, 1 Hz to 10 MHz, (1050 Vrms max)• 2.02x full scale Vpp, 1.2x full scale Vrms• Maximum resolution: 1 nV • 60 µV/V (95 %), 77 µV/V (99 %), 1 yearAC current• 10 uA to 30 A• 2.02x full scale Vpp, 1 Hz to 100 kHz 1.2x FS Vrms• Maximum resolution: 1 pA • 250 µA/V (95 %), 323 µA/V (99 %), 1 year Resistance• 1Ω to 10 GΩ (20 GΩ max) • 2.02x full scale• Maximum resolution: 10 nΩ• 7 µΩ/Ω (95 %), 9 µΩ/Ω (99 %), 1 year• Low current mode,high voltage mode and current-reversal Tru Ohms™Digitize V• 100 mV to 1000 V, (1050 Vmax)• 2.02x full scale• Maximum resolution: 18 bits• 5 mega-samples per secondsample rate• Up to 20 MHz bandwidthDigitize I• 10 µA to 30 A• 2.02x full scale• Maximum resolution: 18 bits• 5 mega-samples per secondsample rate• Up to 4 MHz bandwidthFrequency or period• Voltage, up to 10 MHz• Current, up to 100 kHz• Frequency up to 100 MHzon BNC• 0.5 µHz/Hz, 1 yearCapacitance• 1 nF to 100 mF• 400 µF/F, 1 yearTemperature• PRT and thermocouple• 5 mK PRT, 25 mK TC, 1 yearRF power• Rhode & Schwarz NRP seriesDC I and AC I external shunt• A40B and any other externalshuntReading speed• 1reading/**************memory• 100,000readings/*****digit into memory• Up to 5,000,000 (5 MS/s)readings /s into volatilememory in digitize V and I• Up to 500,000 readings/stransfer through USB inbinary formatMeasurement memory• 15 million readings volitile• 7.5 million readings volitilewith time stamp* 16 GB non-volitileGPIB, USBTMC, Ethernet• Native SCPI compliant remotecommands• 8508A and 3458A emulationmode• Fully support MET/CAL™ cali-bration procedures library inFluke 8508A emulation• IVI driver• USB thumb drive for conve-nient data transfer in .csvformatTrigger mechanisms• Manual trigger• External BNC Trig In andTrig Out• Internal or level trigger• Timer trigger• Epoch trigger• Line trigger• BUS triggerCE and CSA compliantComparing the 8588A and the 8558AComparing the 8588A and the 8558AStability, simplicity and performance by design The 8588A incorporates excep-tional linearity, low noise and stability in the design. This best-in-class long-scale digital reference multimeter guarantees superior 3.5 ppm one-year dc voltage relative accuracy at99 % confidence level and long-term stability over awide measurement range and functions.The 8588A contains the world’s most stable voltage references and attenuators custom crafted at Fluke Cali-bration. These precision components eliminate the need for daily internal self-calibration to compensate for drift when less-precise components are used. Autozeroing also becomes unnecessary because the ampli-fier offsets are ultra-stable. The 8588A achieves an exceptional 8.5-digit resolution reading in one second, two times shorter than the next best in class, which amounts to considerable productivity improvements.The 8588A is easy and intui-tive to use. It is the ideal lab multimeter for metrologists and calibration laboratory manag-ers who expect and appreciate a straightforward setup that quickly achieves the maximum performance of the instrument.• 3.5 µV/V (99 %), 1 year relative accuracy, dc voltage, without internal self-calibra-tion or auto-adjustments • 0.65 µV/V (99 %), 24 hour stability, dc voltage• 9 µΩ/Ω (99 %), 1 year, resistance• 2.02x full scale stretches lower noise floor to higher signal levels to maximize higher accuracies from the instrument• 0 ns to 100 s aperture setting allows the industry’s widest flexibility to control data capture window Accuracy, offset andstability provide excellentac performanceThe 8588A provides the mostaccurate true ac rms mea-surement available in a FlukeCalibration multimeter.With a 5 mega-sam-ples-per-second samplinganalog-to-digital converterand an extraordinarily stabledc analog path, the 8588Aachieves remarkable ac rmsmeasurement performance thatis ten times faster, two timesless noisy, and more sensitivefor low level signals than otherinstruments in this class. Itutilizes digital rms calculationsto maintain full resolution of awide dynamic range of digitizedsignals.Rapid digital filters are moreeffective than their analogequivalents for faster settling.The digital filters eliminate thedielectric absorption on analogfilters, commonly associatedwith residual slow-tail char-acteristics. The digital filterseffectively shorten settling timeto within 6 cycles of the filterfrequency and less than 1 ppmof the fully settled value. This isup to 10 times faster than otherlong-scale precision digital mul-timeters at low frequencies.Low noise is achieved fromaveraging the collected high-resolution digitized data andthe inherently stable signalpath. De-coupling low levelsignal sensitivity from tempera-ture drift enables the 8588A tomake high accuracy low-levelac measurements. Therefore,temperature drift, offsets, andlong-term instability typicallyassociated with an analog rmsconverter are eliminated.• 77 µV/V (99 %), 1 yearrelative accuracy, for themost accurate ac voltagemeasurement• 323 µA/A (99 %), 1 yearrelative accuracy, ac current• 15 ms settling time at1 kHz ac filter accom-plishes 10x faster ac voltagemeasurement• 2.02x full scale Vpp, 1.2x fullscale Vrms• Up to 30 A for peak accurrent greatly extends accurrent measurement rangeAC voltage measurementAC voltage measurement settingsSoft menu keysLarge, bright full color display30 A terminal™ terminalsThe intuitive user interface and ﬂatmenu structure makes it easy to access conﬁgurations and view trend plots,waveforms, FFT, histogram and statistics.easy to learn.Enables industry's widest current measurement range through a single terminal.Multi-language selectionChoice of English, Chinese, French,Japanese, Korean, Russian and Spanish.and easily to a ﬂash drive.Run/Stop triggerToggles the continuous, or free run, measurement state.easily to a ﬂash drive.Usability designed for metrologists by metrologistsThe 8588A is the ideal lab multimeter. It streamlines the measurement process while eliminating misunderstandings, with an easy-to-access user interface in English, Chinese, French, German, Japanese, Korean, Russian and Spanish. An intuitive graphical display lets you easily visualize trends, histograms, complex waveforms, and statistics and perform routine metrology tasks quickly. You can perform both real-time and post-capture analysis for short-term and long-term stabil-ity, identifying and quantifying drifts, run-around noise and uncertainty analysis without the need for an external com-puter or software. You can also quickly visualize post-processed frequency domain signals of fundamental and harmonic amplitude and phase content.Some popular system mul-timeters have complex menustructures and unintuitive com-mands, while others lack anyuser interface, presenting bar-riers to training and operation.By contrast, the 8588A/8558A feature an easy-to-access con-figuration menu that makes it easy to train new users.The front panel features many new usability improve-ments. Visual ConnectionManagement™ output terminals light up to show which termi-nals are active, guiding the user to make the correct connections. The handles are over-molded for comfort and easy transport. USB host ports are placed both on the front and rear of the instrument. Use the ports to export data to external memory devices or simplify firmware updates. For remote communi-cation with a PC, choose from Ethernet, GPIB or USBTMC con-nectors on the rear panel.The 8558A/8558A provide full emulation of the Fluke8508A Reference Multimeter and command compatibility of the Keysight 3458A Digital Multimeter via SCPI commands, making it an ideal replacement for these older instruments.• Graphical display thatenables instantaneousvisualization of trend plot, Trend plotAnalyze: Histogramstatistical analysis, histogramand FFT.• GPIB, USBTMC, Ethernetallows industry standard selection of remote interface.• USB thumb drive enablesquick and easy data transfer to PC in .csv format.• SCPI compliant commandswith 8508A and 3458A emulation mode sim-plifies and accelerates system upgrade process to 8588A/8558A• Programmable front/rearinput switching with scan measurement allows ratio, difference and deviationmeasurements between front and rear terminals in dc voltage and resistance, func-tions with state-of-the-art linearity, noise performance, superb transfer uncertainties. • Capacitance and RF powermeter readout from Rohde & Schwarz NRP Seriesexpands the utility of 8588A in calibrating multi-product calibrators for improved pro-ductivity in calibration labs.Accurate data, delivered amazingly fastShorter test time on the8588A/8558A high-speed digital platform enables you to increase throughput, improve yield and realize a greater return on your investment.The 8588A/8558A digitizesto memory at 200 nanosec-onds per reading and delivers 4.5 digit data to a PC via USB, Ethernet and GPIB at 100,000 readings per second. Fast, high resolution data capture gives you the quantity and quality of information you need to make timely, correct decisions affect-ing system throughput and efficiency.• 0 ns to 100 s aperture setting allows industry’s widest flex-ibility to control data capture window• Reading speed: 1 reading /s @ 8.5 digits to 100,000 reading/***********• Data transfer from memory to PC: up to 500,000 readings /s in binary format through USB, up to 200,000 through Ethernet and GPIBDebug and perfect your device under testThe 8588A/8558A features a5 mega-sample digitizing rate with up to 20 MHz analog band-width, making it the first and only instrument on the market that can characterize extremely low level transient signals at 18-bit resolution. This capabil-ity makes it easier to debug designs, uncover anomalies and perfect your devices under test for use in real life environments.• Voltage sensitivity to hun-dreds of nV and current sensitivity to hundreds of pA allows you uncover ultra-low level transient signals• Up to 20 MHz bandwidth for voltage and 4 MHz for current retains high bandwidth con-tent of the signal measured • 18-bit SAR analog-to-digital converter that achieves 5 mega-samples per second • 5 mega-samples per secondsample rate, into buffer,for capturing complex, fastchanging waveforms• 15 million readings memoryallows large amount of datastorage eliminating theimmediate need to transferdata to a PC• Graphical waveform displayenables real-time visualiza-tion of complex waveforms,increased productivity withfaster access to results andanswersFast, reliable and accuratesystem compatibilityInserting a new instrument intoa tightly synchronized systemcan create overhead and incom-patibility. The 8588A/8558A’sdigital platform includescommon connectivity interfacesplus precise triggering that letsit digitize and transfer data toanywhere in the system foranalysis, with minimal effortand the highest reliability.• GPIB, USBTMC, Ethernetallows industry standardselection of remote interface• USB thumb drive enablequick and easy data transferto PC in .csv format• SCPI compliant commandswith 8508A and 3458A emu-lation mode simplifies andaccelerates system upgradeprocess to 8588A/8558A• Fully supports MET/CALcalibration procedures librarythat commands the Fluke8508A• IVI Driver for industrystandard control of DMM on8588A/8558A• Trigger Mechanisms: ExternalBNC Trigger Trig In and TrigOut, Internal or level trigger,Timer trigger, Epoch trigger,Line trigger, Bus Trigger• Less than 100 ns triggerlatency with external BNCtrigger for digitize voltageand currentTrend PlotAnalyze: FFTTrigger SystemThe MET/CAL™ Calibration Management Software advantageBoth 8588A and 8558A work with Fluke CalibrationMET/CAL™ Calibration Software. With native MET/CAL support or using 8508A emulation mode, you can increase throughput up to four times that of traditional manual and multi-product meth-ods while ensuring calibrations are performed consistently every time. This powerful software documents calibra-tion procedures, processes and results for ease in complying with ISO 17025 and similar quality standards.Support and services when you need them Fluke Calibration offers testing,repair and calibration servicesto meet your needs quickly andat a fair cost while maintainingthe high level of quality that youexpect. Our electrical calibrationlaboratories are accredited forconformance to ISO Guide 17025and we maintain global calibra-tion and repair facilities.Get peace of mind anduptime with a Gold Care-Plan service packageThe 8588A/8558A multimeterscome with a standard one-year factory warranty. You canenhance warranty protectionwith a Priority Gold InstrumentCarePlan service package.A Priority Gold InstrumentCarePlan includes an expe-dited annual calibration toreduce downtime by a weekand extended warranty to helpensure the best long-term per-formance from your instruments.Choose from one-year, three-year or five-year CarePlans.(Note: Priority shipping timesvary by country. Contact yourlocal Fluke Calibration salesrepresentative for details.)Ordering informationModels Description8588A Reference Multimeter8558A8.5 Digit MultimeterStandard accessories Description8588A-LEAD KIT-OSP General purpose probe kit & pouch with 2x 4-way shorting PCBOptional accessories DescriptionY8588Rack mount kit (2U – 3.5 in)Y8588S Slide rack mount kit8588A/CASE Transit case8588A-LEAD Comprehensive measurement lead kitIncludes:• 1x 8588A-LEAD KIT-OSP, general purpose probe kit• 1x 1 m screened 322/0.1 copper (30 Amp Rating) with 6 mm gold plated copperspade terminals• 4x 8588A-LEAD/THERMAL, 1.5 m two core screened low thermal cable with 6 mmgold plated copper spade terminals• 2x Locking adaptor 4 mm binding post to safety8588A-SHORT4-way shorting PCB8588A-LEAD/THERMAL Low thermal lead cable, 1.5 m two core screened low thermal cable with6 mm gold plated copper spade terminals8588A-7000K Cal kit with 1 GOhm standard and connecting leads96000SNS R&S power sensor8588A Reference Multimeter / 8558A 8.5-Digit Multimeter Fluke Calibration 1112 Fluke Calibration 8588A Reference Multimeter / 8558A 8.5-Digit Multimeter Fluke Calibration PO Box 9090, Everett, WA 98206 U.S.A.Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands Web access: http://www.flukecal.eu Fluke Calibration. Precision, performance, confidence.™For more information call: In the U.S.A. (877) 355-3225 or Fax (425) 446-5716 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-6110 or Fax +1 (425) 446-5716 Web access: ©2019, 2020 Fluke Calibration. Specifications subject to change without notice. Printed in U.S.A. 2/2020 6011948b-en Modification of this document is not permitted without written permissionfrom Fluke Calibration.。

深圳市普联技术 TD-W89841N系列配置指南

目录
第一章 1.1 1.2 第二章 2.1 产品概述 ......................................................................................................... 1 产品简介.........................................................................................................................1 主要特性.........................................................................................................................2 硬件描述 ......................................................................................................... 3 面板布置.........................................................................................................................3 2.1.1 2.1.2 2.2 2.3 2.4 2.5 第三章 3.1 3.2 第四章 4.1 4.2 4.3 4.4 4.5 4.6 4.7 前面板 ................................................................................................................3 后面板 ................................................................................................................4

TDA4886A中文资料

元器件交易网
Philips Semiconductors
Product speciﬁcation
140 MHz video controller with I2C-bus
CONTENTS 1 2 3 4 5 6 7 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 8 9 10 11 12 12.1 12.2 13 14 15 15.1 15.2 15.3 15.4 16 17 18 FEATURES GENERAL DESCRIPTION ORDERING INFORMATION QUICK REFERENCE DATA BLOCK DIAGRAM PINNING FUNCTIONAL DESCRIPTION Signal input stage (input clamping, blanking and clipping) Electronic potentiometer stages Output stage Pedestal blanking Output clamping, feedback references and DAC outputs Clamping and blanking pulses On Screen Display (OSD) Subcontrast adjustment, contrast modulation and beam current limiting I2C-bus control I2C-bus data buffer LIMITING VALUES THERMAL CHARACTERISTICS CHARACTERISTICS I2C-BUS PROTOCOL TEST AND APPLICATION INFORMATION Test boards Recommendations for building the application board INTERNAL CIRCUITRY PACKAGE OUTLINE SOLDERING Introduction to soldering through-hole mount packages Soldering by dipping or by solder wave Manual soldering Suitability of through-hole mount IC packages for dipping and wave soldering methods DEFINITIONS LIFE SUPPORT APPLICATIONS PURCHASE OF PHILIPS I2C COMPONENTS

TDA8588BJ中文资料

• Boost amplifier and voltage regulator for car radios and CD/MD players. GENERAL DESCRIPTION Ampliﬁers The TDA8588 has a complementary quad audio power amplifier that uses BCDMOS technology. It contains four amplifiers configured in Bridge Tied Load (BTL) to drive speakers for front and rear left and right channels. The I2C-bus allows diagnostic information of each amplifier and its speaker to be read separately. Both front and both rear channel amplifiers can be configured independently in line driver mode with a gain of 20 dB (differential output). Voltage regulators The TDA8588 has a multiple output voltage regulator with two power switches. The voltage regulator contains the following: • Four switchable regulators and one permanently active regulator (microcontroller supply) • Two power switches with loss-of-ground protection • A reset output that can be used to communicate with a microcontroller. The quiescent current has a very low level of 150 µA with only regulator 2 active.

CD4538中文资料

C in Farads) s ±1.0% pulse-width variation from part to part (typ.) s Wide pulse-width range: 1 µs to ∞ s Separate latched reset inputs s Symmetrical output sink and source capability s Low standby current: 5 nA (typ.) @ 5 VDC s Pin compatible to CD4528BC
Inputs
Outputs
Clear
A
B
Q
Q
L
X
X
L
H
X
H
X
L
H
X H H
X L ↑
L
L
H
↓
H
H = HIGH Level L = LOW Level ↑ = Transition from LOW-to-HIGH
↓ = Transition from HIGH-to-LOW = One HIGH Level Pulse = One LOW Level Pulse X = Irrelevant
© 1999 Fairchild Semiconductor Corporation DS006000.prf

元器件交易网
Block am
CD4538BC
RX and CX are External Components VDD = Pin 16 VSS = Pin 8
Ordering Code:
Order Number Package Number
Package Description

CD480 CD485手机快速启动指南说明书

CD480/CD485Note * In multi-handset packs, there are additional handsets, chargers and power adapters.** In some countries, you have to connect the line adapter to the line cord, then plug the line cord to the telephone socket.Caution Use only the supplied batteries • and power adapter.What’s in the box*Charger **Line cord**User manual Quick start guide Guarantee1Connect2Get started3 EnjoyCallT o make a call, press • and dial the phone number.T o answer a call, press • when the phone rings.T o end a call, press • .Adjust the earpiece volume Press or to adjust the volume during a call.Add a contact in the phonebook Press 1 .Select 2 [Option] > [Add new], then press [OK] to confirm.Enter the name then press 3 [OK] to confirm.Enter the number, then press 4 [Save] to confirm.Record an announcement (for CD485 only)Press 1 [Menu].Select 2 > [Announcement], then press [OK] to confirm.Select 3 [Answer only] or [Record also], then press [OK] to confirm.Select 4 [Record new], then press [OK] to confirm.Start recording close to the microphone after the beep.5 Press 6 [OK] to stop recording.Y ou can listen to the newly recorded »announcement on the handset.Need help?User manualRefer to the user manual that came with your new phone.Online help /supportWelcome to PhilipsRegister your product at /welcome Reproduction in whole or in part is prohibited without the written consent of the copyright owner.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.© 2011 Koninklijke Philips Electronics N.V. All rights reserved.QSG_CD480-485_05_EN_V2.1WK11304 0979。

赛米控丹佛斯电子 SEMiX854GB176HDs 数据表

SEMiX ®4sTrench IGBT ModulesSEMiX854GB176HDsFeatures•Homogeneous Si•Trench = Trenchgate technology •V CE(sat) with positive temperature coefficient•UL recognised file no. E63532Typical Applications*•AC inverter drives •UPS•Electronic weldersAbsolute Maximum Ratings SymbolConditions Values UnitIGBT V CES T j =25°C 1700V I C T j =150°CT c =25°C 779A T c =80°C549A I Cnom 600A I CRMI CRM = 2xI Cnom 1200A V GES -20...20V t psc V CC =1000V V GE ≤ 20V V CES ≤ 1700VT j =125°C10µs T j-55...150°C Inverse diode I F T j =150°CT c =25°C 740A T c =80°C 496A I Fnom600A I FRM I FRM = 2xI Fnom1200A I FSM t p =10ms, sin 180°, T j =25°C3800A T j -40 (150)°C Module I t(RMS)T terminal =80°C600A T stg -40...125°C V isolAC sinus 50Hz, t =1min4000VCharacteristics SymbolConditions min.typ.max.UnitIGBT V CE(sat)I C =600A V GE =15V chiplevelT j =25°C 2 2.45V T j =125°C 2.5 2.9V V CE0T j =25°C 1 1.2V T j =125°C0.9 1.1V r CE V GE =15VT j =25°C 1.7 2.1m ΩT j =125°C2.63.0m ΩV GE(th)V GE =V CE , I C =24mA 5.25.86.4V I CES V GE =0V V CE =1700V T j =25°C 4mA T j =125°C mA C ies V CE =25V V GE =0Vf =1MHz 52.8nF C oes f =1MHz 2.20nF C res f =1MHz1.75nF Q G V GE =- 8 V...+ 15 V 5600nC R Gint T j =25°C 1.25Ωt d(on)V CC =1200V I C =600A V GE =±15V R G on =2ΩR G off =2ΩT j =125°C 340ns t r T j =125°C 80ns E on T j =125°C 300mJ t d(off)T j =125°C 890ns t f T j =125°C 155ns E off T j =125°C250mJ R th(j-c)per IGBT 0.045K/WCharacteristics SymbolConditionsmin.typ.max.UnitInverse diodeV F = V EC I F =600AV GE =0V chipT j =25°C 1.7 1.90V T j =125°C 1.7 1.9V V F0T j =25°C 0.9 1.1 1.3V T j =125°C0.70.9 1.1V r FT j =25°C 1.0 1.0 1.0m ΩT j =125°C1.31.3 1.3m ΩI RRM I F =600A di/dt off =8000A/µs V GE =-15VV CC =1200VT j =125°C 730A Q rr T j=125°C220µC E rr T j =125°C 170mJR th(j-c)per diode0.081K/WModule L CE 22nH R CC'+EE'res., terminal-chip T C =25°C 0.7m ΩT C =125°C1m ΩR th(c-s)per module 0.03K/W M s to heat sink (M5)35Nm M tto terminals (M6)2.55Nm Nmw400gTemperatur Sensor R 100T c =100°C (R 25=5 k Ω)493 ± 5%ΩB 100/125R (T)=R 100exp[B 100/125(1/T-1/T 100)]; T[K];3550 ±2%K SEMiX ® 4sTrench IGBT ModulesSEMiX854GB176HDsFeatures•Homogeneous Si•Trench = Trenchgate technology •V CE(sat) with positive temperature coefficient•UL recognised file no. E63532Typical Applications*•AC inverter drives •UPS•Electronic weldersFig. 1: Typ. output characteristic, inclusive R CC'+ EE'Fig. 2: Rated current vs. temperature I C = f (T C )Fig. 3: Typ. turn-on /-off energy = f (I C )Fig. 4: Typ. turn-on /-off energy = f (R G )Fig. 5: Typ. transfer characteristic Fig. 6: Typ. gate charge characteristicFig. 7: Typ. switching times vs. I C Fig. 8: Typ. switching times vs. gate resistor R GFig. 9: Typ. transient thermal impedance Fig. 10: Typ. CAL diode forward charact., incl. R CC'+EE'Fig. 11: Typ. CAL diode peak reverse recovery current Fig. 12: Typ. CAL diode recovery chargeThis is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX* The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff.spring configuration。

基于DDS的频率特性测量系统的设计

Science and Technology &Innovation ┃科技与创新2020年第08期·1·文章编号：2095－6835（2020）08－0001－02基于DDS 的频率特性测量系统的设计沈阳1，杨钦鹏2，曹洪奎2，祖天一2（1.辽宁工业大学理学院，辽宁锦州121001；2.辽宁工业大学电子与信息工程学院，辽宁锦州121001）摘要：设计了一种基于DDS 技术的频率特性测量系统，系统由单片机IAP15W4K58S4控制DDS 芯片AD9850产生弦扫频信号，由相位与频率的关系、幅度与频率的关系得出相频特性曲线和幅频特性曲线。

测试结果表明，基于单片机技术的频率特性测量系统，实现了对被测网络的频率特性测量与显示等功能。

关键词：频率特性；DDS 技术；峰值检测；相位检测中图分类号：TM935.1文献标识码：ADOI ：10.15913/ki.kjycx.2020.08.0011引言在现代电子电路系统中，频率特性是信号放大传输电路的重要特性指标，能反映电路在不同信号频率输入下的系统响应。

频率特性测试设备为放大电路的性能分析提供了极大的便利。

由单片机作为主控制器，配合其他器件（如DDS 芯片等）组成扫频信号源，利用数字式控制系统完成扫频功能，这种设计频率特性测量系统的方法以它的高性价比受到越来越多人的青睐。

本设计以单片机IAP15W4K58S4为控制核心，结合DDS 直接数字频率合成技术，实现频率测量系统的硬件电路和系统软件设计。

系统由单片机IAP15W4K58S4控制DDS 芯片AD9850产生正弦扫频信号，正弦扫频信号经过缓冲放大后输入到被测网络的输入端，被测网络的输出信号再经过整形电路和由异或门74LS86构成的相位检测电路得到该输出信号的频率和相位差；同时通过由AD736构成的峰值检测电路测得输出信号的峰值，经换算得出该信号的幅度。

由相位与频率的关系、幅度与频率的关系得出相频特性曲线和幅频特性曲线，并将特性曲线显示在2.8寸TFT 液晶屏上，从而完成对被测网络的频率特性的测量与显示。

858-304 数据表 - wago说明书

Data sheet | Item number: 858-304Relay module; Nominal input voltage: 24 VDC; 4 changeover contacts;Limiting continuous current: 5 A; with manual operation; Red status indicator; Module width: 31 mm; 1,50 mm²/858-304Subject to changes. Please also observe the further product documentation!WAGO Kontakttechnik GmbH & Co. KG Do you have any questions about our products?DC load limit curveDataTechnical data Control circuitNominal input voltage U NDC 24 VInput voltage range -20 … +10 %Subject to changes. Please also observe the further product documentation!WAGO Kontakttechnik GmbH & Co. KG Do you have any questions about our products?Input voltage range -20 … +10 %Nominal input current at U N36.9 mALoad circuitNumber of changeover/switchover contacts 4Contact material (relay)AgCe Limiting continuous current 5 AInrush current (resistive) (max.)(AC) 15 A / 4 s Switching voltage (max.)AC 250 VSwitching power (resistive) (max.)AC 1250 VA; DC (see load limit curve)Switching capacityAC-15: 1 A / AC 240 V; DC-13: 2 A / DC 24 V Recommended minimum load 12 V / 100 mA Pull-in time (typ.)25ms Drop-out time (typ.)25ms Bounce time (typ.)4msElectrical life (NO; resistive load; 23 °C)100 x 10switching operations 3 Mechanical life20 x 10 switching operations6SignalingStatus indicatorRed LED MechanicalSafety and protectionRated voltage 250V Rated surge voltage 2.5kV Pollution degree2Dielectric strength, control/load circuit (AC, 1 min) 1.5 kVrms Dielectric strength, open contact (AC, 1 min)1 kVrms Dielectric strength, load/load circuit (AC, 1 min) 1.5 kVrms Protection typeIP20Connection dataConnection technology Push-in CAGE CLAMP ®Solid conductor0.34 … 1.5 mm² / 22 … 16 AWG Fine-stranded conductor0.34 … 1.5 mm² / 22 … 16 AWGStrip length 9 … 10 mm / 0.35 … 0.39 inchSubject to changes. Please also observe the further product documentation!WAGO Kontakttechnik GmbH & Co. KG Do you have any questions about our products?Strip length9 … 10 mm / 0.35 … 0.39 inchNote (conductor cross-section)2 x 0.34 … 2 x 1.5 mm² / 1 x 2.5 mm² / 2 x 22 … 2 x 16 AWGPhysical dataWidth31 mm / 1.22 inch Height from upper-edge of DIN-rail 73 mm / 2.874 inch Depth97 mm / 3.819 inchMechanical dataMounting typeDIN-35 railMaterial dataFire load 1.225MJ Weight96.6gEnvironmental requirementsSurrounding air temperature (operation at U )N -25 … 70 °C Surrounding air (operating) temperature for UL -25 … 50 °C Surrounding air temperature (storage)-40 … 80 °C Processing temperature-25 … +50 °CStandards and specificationsStandards/SpecificationsEN 61010-2-201; EN 61810-1; EN 61373; GL; UL 508 (max. 50 °C)Basic relayWAGO Basic Relay858-150Commercial dataProduct Group 6 (Interface Electronics)Packaging type BOX Country of origin CNGTIN4055143567770Customs tariff number853********Subject to changes. Please also observe the further product documentation!WAGO Kontakttechnik GmbH & Co. KG Do you have any questions about our products?Approvals / CertificatesShip ApprovalsLogo ApprovalAdditional Approval Text Certificatename DNV GLDet Norske Veritas, Germanischer Lloyd-TAA00001D1NKNippon Kaiji Kyokai-TA17255MPRSPolski Rejestr Statków-TE/2186/880590/18UL-ApprovalsLogo ApprovalAdditional Approval Text Certificatename ULUL International Netherlands B.V. (ORDINARY LOCATIONS)UL 508E175199 Sec.6Compatible productsGeneral accessoriesItem no.: 209-145Group marker carrier; white/209-145Item no.: 209-184Protection cover; transparent/209-184Item no.: 788-120Accessories for relay modules; Operation status indicator: red/788-120Item no.: 858-110Mounting bracket/858-110Item no.: 858-150Basic relay; Nominal input voltage: 24 VDC; 4 changeover contacts; Limiting continuous current: 5 A; with manual operation; Module width: 22 mm; Module height: 25 mm/858-150Marking accessoriesItem no.: 2009-110Subject to changes. Please also observe the further product documentation!WAGO Kontakttechnik GmbH & Co. KG Do you have any questions about our products?Item no.: 2009-110Marking strips; for Smart Printer; on reel; not stretchable; plain; snap-on type; white/2009-110Item no.: 2009-115WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; white/2009-115Item no.: 2009-115/000-002WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; yellow/2009-115/000-002Item no.: 2009-115/000-006WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; blue /2009-115/000-006Item no.: 2009-115/000-007WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; gray /2009-115/000-007Item no.: 2009-115/000-012WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; orange /2009-115/000-012Item no.: 2009-115/000-017WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; light green/2009-115/000-017Item no.: 2009-115/000-023WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; green/2009-115/000-023Item no.: 2009-115/000-024WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; violet /2009-115/000-024Item no.: 209-128Adaptor; gray/209-128Item no.: 209-183Marker card; white/209-183Item no.: 210-110Fiber-tip pen/210-110Item no.: 249-105Group marker carrier; gray/249-105Item no.: 793-501WMB marking card; as card; not stretchable; plain; snap-on type; white/793-501Item no.: 793-501/000-002WMB marking card; as card; not stretchable; plain; snap-on type; yellow/793-501/000-002Item no.: 793-501//793-501Subject to changes. Please also observe the further product documentation!WAGO Kontakttechnik GmbH & Co. KG Do you have any questions about our products?Item no.: 793-501/000-005WMB marking card; as card; not stretchable; plain; snap-on type; red /793-501/000-005Item no.: 793-501/000-006WMB marking card; as card; not stretchable; plain; snap-on type; blue /793-501/000-006Item no.: 793-501/000-007WMB marking card; as card; not stretchable; plain; snap-on type; gray /793-501/000-007Item no.: 793-501/000-012WMB marking card; as card; not stretchable; plain; snap-on type; orange /793-501/000-012Item no.: 793-501/000-017WMB marking card; as card; not stretchable; plain; snap-on type; light green /793-501/000-017Item no.: 793-501/000-023WMB marking card; as card; not stretchable; plain; snap-on type; green /793-501/000-023Item no.: 793-501/000-024WMB marking card; as card; not stretchable; plain; snap-on type; violet/793-501/000-024Item no.: 793-502WMB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type; white/793-502Item no.: 793-502/000-002WMB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type; yellow/793-502/000-002Item no.: 793-502/000-005WMB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type; red/793-502/000-005Item no.: 793-502/000-006WMB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type; blue/793-502/000-006Item no.: 793-502/000-007WMB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type; gray/793-502/000-007Item no.: 793-502/000-012WMB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type; orange/793-502/000-012Item no.: 793-502/000-017WMB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type;light green/793-502/000-017Subject to changes. Please also observe the further product documentation!WAGO Kontakttechnik GmbH & Co. KG Do you have any questions about our products?light greenItem no.: 793-502/000-023WMB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type; green/793-502/000-023Item no.: 793-502/000-024WMB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type; violet/793-502/000-024Item no.: 793-503WMB marking card; as card; MARKED; 11 ... 20 (10x); not stretchable; Horizontal marking; snap-on type; white/793-503Item no.: 793-503/000-002WMB marking card; as card; MARKED; 11 ... 20 (10x); not stretchable; Horizontal marking; snap-on type;yellow/793-503/000-002Item no.: 793-503/000-005WMB marking card; as card; MARKED; 11 ... 20 (10x); not stretchable; Horizontal marking; snap-on type;red/793-503/000-005Item no.: 793-503/000-006WMB marking card; as card; MARKED; 11 ... 20 (10x); not stretchable; Horizontal marking; snap-on type;blue/793-503/000-006Item no.: 793-503/000-007WMB marking card; as card; MARKED; 11 ... 20 (10x); not stretchable; Horizontal marking; snap-on type;gray/793-503/000-007Item no.: 793-503/000-012WMB marking card; as card; MARKED; 11 ... 20 (10x); not stretchable; Horizontal marking; snap-on type;orange/793-503/000-012Item no.: 793-503/000-017WMB marking card; as card; MARKED; 11 ... 20 (10x); not stretchable; Horizontal marking; snap-on type;light green/793-503/000-017Item no.: 793-503/000-023WMB marking card; as card; MARKED; 11 ... 20 (10x); not stretchable; Horizontal marking; snap-on type;green/793-503/000-023Item no.: 793-503/000-024WMB marking card; as card; MARKED; 11 ... 20 (10x); not stretchable; Horizontal marking; snap-on type;violet/793-503/000-024Item no.: 793-504WMB marking card; as card; MARKED; 21 ... 30 (10x); not stretchable; Horizontal marking; snap-on type; white/793-504Item no.: 793-504/000-002WMB marking card; as card; MARKED; 21 ... 30 (10x); not stretchable; Horizontal marking; snap-on type;yellow/793-504/000-002Item no.: 793-504/000-005WMB marking card; as card; MARKED; 21 ... 30 (10x); not stretchable; Horizontal marking; snap-on type; /793-504Subject to changes. Please also observe the further product documentation!WAGO Kontakttechnik GmbH & Co. KG Do you have any questions about our products?WMB marking card; as card; MARKED; 21 ... 30 (10x); not stretchable; Horizontal marking; snap-on type; red /793-504/000-005Item no.: 793-504/000-006WMB marking card; as card; MARKED; 21 ... 30 (10x); not stretchable; Horizontal marking; snap-on type;blue/793-504/000-006Item no.: 793-504/000-012WMB marking card; as card; MARKED; 21 ... 30 (10x); not stretchable; Horizontal marking; snap-on type;orange/793-504/000-012Item no.: 793-504/000-017WMB marking card; as card; MARKED; 21 ... 30 (10x); not stretchable; Horizontal marking; snap-on type;light green/793-504/000-017Item no.: 793-504/000-023WMB marking card; as card; MARKED; 21 ... 30 (10x); not stretchable; Horizontal marking; snap-on type;green/793-504/000-023Item no.: 793-505WMB marking card; as card; MARKED; 31 ... 40 (10x); not stretchable; Horizontal marking; snap-on type; white/793-505Item no.: 793-505/000-005WMB marking card; as card; MARKED; 31 ... 40 (10x); not stretchable; Horizontal marking; snap-on type;red/793-505/000-005Item no.: 793-505/000-006WMB marking card; as card; MARKED; 31 ... 40 (10x); not stretchable; Horizontal marking; snap-on type;blue/793-505/000-006Item no.: 793-505/000-007WMB marking card; as card; MARKED; 31 ... 40 (10x); not stretchable; Horizontal marking; snap-on type;gray/793-505/000-007Item no.: 793-505/000-012WMB marking card; as card; MARKED; 31 ... 40 (10x); not stretchable; Horizontal marking; snap-on type;orange/793-505/000-012Item no.: 793-506WMB marking card; as card; MARKED; 41 ... 50 (10x); not stretchable; Horizontal marking; snap-on type; white/793-506Item no.: 793-506/000-005WMB marking card; as card; MARKED; 41 ... 50 (10x); not stretchable; Horizontal marking; snap-on type;red/793-506/000-005Item no.: 793-506/000-006WMB marking card; as card; MARKED; 41 ... 50 (10x); not stretchable; Horizontal marking; snap-on type;blue/793-506/000-006Item no.: 793-506/000-012WMB marking card; as card; MARKED; 41 ... 50 (10x); not stretchable; Horizontal marking; snap-on type;orange/793-506/000-012Subject to changes. Please also observe the further product documentation!WAGO Kontakttechnik GmbH & Co. KG Do you have any questions about our products?Item no.: 793-506/000-017WMB marking card; as card; MARKED; 41 ... 50 (10x); not stretchable; Horizontal marking; snap-on type;light green/793-506/000-017Item no.: 793-5501WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on type; white/793-5501Item no.: 793-5501/000-002WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-ontype; yellow/793-5501/000-002Item no.: 793-5501/000-005WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-ontype; red/793-5501/000-005Item no.: 793-5501/000-006WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-ontype; blue/793-5501/000-006Item no.: 793-5501/000-007WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-ontype; gray/793-5501/000-007Item no.: 793-5501/000-012WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-ontype; orange/793-5501/000-012Item no.: 793-5501/000-014WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-ontype; brown/793-5501/000-014Item no.: 793-5501/000-017WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-ontype; green/793-5501/000-017Item no.: 793-5501/000-023WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-ontype; light green/793-5501/000-023Item no.: 793-5501/000-024WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-ontype; violet/793-5501/000-024Item no.: 793-566WMB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type; white/793-566Item no.: 793-566/000-002WMB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type; yellow/793-566/000-002Item no.: 793-566/000-005WMB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type;redSubject to changes. Please also observe the further product documentation!WAGO Kontakttechnik GmbH & Co. KG Do you have any questions about our products?red/793-566/000-005Item no.: 793-566/000-006WMB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type; blue/793-566/000-006Item no.: 793-566/000-007WMB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type; gray/793-566/000-007Item no.: 793-566/000-012WMB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type; orange/793-566/000-012Item no.: 793-566/000-017WMB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type; light green/793-566/000-017Item no.: 793-566/000-023WMB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type; green/793-566/000-023Item no.: 793-566/000-024WMB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type; violet/793-566/000-024JumperItem no.: 858-402Jumper/858-402toolsItem no.: 210-719Operating tool; Blade: 2.5 x 0.4 mm; with a partially insulated shaft/210-719ferruleItem no.: 216-241Ferrule; Sleeve for 0.5 mm² / 20 AWG; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; white/216-241Item no.: 216-242Ferrule; Sleeve for 0.75 mm² / 18 AWG; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; gray/216-242Item no.: 216-243Ferrule; Sleeve for 1 mm² / AWG 18; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; red/216-243Item no.: 216-244Ferrule; Sleeve for 1.5 mm² / AWG 16; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; black/216-244DownloadsSubject to changes. Please also observe the further product documentation!WAGO Kontakttechnik GmbH & Co. KG Do you have any questions about our products?DownloadsDocumentationBid Text858-304docx - Datei 2019 Feb 20docx 17.3 kB Download858-304X81 - Datei 2019 Feb 19xml 4.8 kBDownloadInstruction LeafletStecksockel für Elementarrelaispdf 2.6 MBDownloadAdditional InformationDisposal; Electrical and electronic equipment, Packaging V 1.0.0pdf265.8 kBDownloadCAD/CAE-DataCAD data2D/3D Models 858-304URL DownloadCAE dataEPLAN Data Portal 858-304URL Download WSCAD Universe 858-304URL Download ZUKEN Portal 858-304URLDownloadEnvironmental Product ComplianceCompliance SearchEnvironmental Product Compliance 858-304Relay module; Nominal input voltage: 24 VDC; 4 changeover contacts; Limiting continuous current: 5 A; with manual operation; Red status indicator; Module width: 31 mm; 1,50 mm²URL DownloadSubject to changes. Please also observe the further product documentation!WAGO Kontakttechnik GmbH & Co. KG Do you have any questions about our products?MarkingMarking using WMB Multi markers and groupmarker carriersRemove jumper with screwdriver.Installation Notes。

TDA4865J资料

Product data sheet
Rev. 02 — 3 November 2006
2 of 18
元器件交易网
NXP Semiconductors
TDA4865J; TDA4865AJ
Vertical deﬂection booster
THERMAL PROTECTION
RP R3
R6
from deflection controller
R2
R1
VN
VP
001aad297
Fig 2. Block diagram of TDA4865AJ
6. Pinning information
6.1 Pinning
VP1 VFB VP2 GND VOUT INN INP
1 2 3 4 5 6 7
7.3 Flyback generator
The ﬂyback generator supplies the vertical output stage during ﬂyback. The TDA4865J is used with a separate ﬂyback supply voltage to achieve a short ﬂyback time with minimized power dissipation. The TDA4865AJ needs a capacitor (CF) connected between pins VP3 and VP2 (see Figure 2). Capacitor CF is charged during scan, using the external diode D1 and resistor R5. During ﬂyback the cathode of capacitor CF is connected to the positive supply voltage and the ﬂyback voltage is then twice the supply voltage. For the TDA4865AJ the resistor R6 in the positive supply line can be used to reduce the power consumption.

TDA4867资料

TDA4867J
VERSION SOT523-1
BLOCK DIAGRAM
guard output or power save mode input flyback voltage
handbook, full pagewidth
Байду номын сангаас
GUARD 8
VP 3
GND 5
VFB 7
TDA4867J
GUARD CIRCUIT FLYBACK GENERATOR
PINNING SYMBOL INP INN VP OUTB GND OUTA VFB GUARD FEEDB PIN 1 2 3 4 5 6 7 8 9 DESCRIPTION non-inverted input inverted input supply voltage output B ground output A ﬂyback supply voltage guard output or power save mode input feedback input Output stages
TDA4867J
The TDA4867J is a power booster for use in colour vertical deflection systems for frame frequencies of 50 to 200 Hz. The circuit provides a high CMRR current driven differential input. Due to the bridge configuration of the two output stages DC-coupling of the deflection coil is achieved. In conjunction with the deflection controller family TDA485x and SAA4856 the ICs offer an extremely advanced system solution.

858说明书!

目录1.概述 (1)1.1简介 (1)1.2技术数据 (2)1.2.1.额定数据： (2)1.2.2.功耗 (2)1.2.3.定值误差 (2)1.2.4.精确工作范围 (2)1.2.5.测量精度 (2)1.2.6.环境要求 (2)1.2.7.工频耐压及耐冲击能力 (3)1.2.8.电磁兼容和抗干扰性能 (3)1.2.9.机械性能 (3)1.2.10.过载能力 (3)1.2.11.通讯能力 (3)1.3保护功能总览 (3)2.监控功能 (5)2.1遥测采集和计算 (5)2.2遥信采集 (5)2.3遥控输出 (5)2.4事件记录 (5)2.5对时方式 (5)3.DEP-858/HP中低压馈变保护 (6)3.1保护原理 (6)3.1.1.复合电压闭锁谐波制动过流保护 (6)3.1.1.1.复合电压元件 (6)3.1.1.2.谐波制动元件 (7)3.1.1.3.过流元件 (7)3.1.2.负序过流保护 (8)3.1.3.低压侧中性线三段零序过流保护 (9)3.1.4.高压侧二段零序电压闭锁方向过流保护 (10)3.1.5.过电压保护 (11)3.1.6.低电压保护 (12)3.1.7.低周减载保护 (12)3.1.8.过负荷保护 (13)3.1.9.非电量保护 (13)3.2告警功能 (14)3.2.1.自检功能 (14)3.2.2.PT断线报警 (14)3.2.3.CT不平衡报警 (14)3.2.4.TWJ异常报警 (15)3.3LED指示灯 (15)3.5遥测信息表 (16)3.6逻辑框图 (19)3.7接线图 (20)3.8保护测控装置外形及开孔图 (21)3.9背端子定义 (21)4.DEP-295操作电源箱 (21)4.1工作原理 (22)4.2技术指标 (22)4.3端子定义 (23)4.4开孔尺寸及示意图 (23)5.使用说明 (24)5.1开机显示 (24)5.2菜单结构 (25)5.3显示和修改保护定值 (26)5.3.1.定值区号 (26)5.3.2.保护定值设置 (26)5.4实时数据显示 (27)5.5报文显示 (27)5.5.1.保护报文显示 (27)5.5.2.保护报文打印 (28)5.5.3.告警报文显示 (28)5.5.4.告警报文打印 (28)5.5.5.SOE报文显示 (28)5.5.6.SOE报文打印 (28)5.5.7.信号复归 (29)5.5.8.报文清除 (29)5.6故障录波显示 (29)5.6.1.录波设置 (29)5.6.2.波形显示 (30)5.6.3.波形打印 (30)5.6.4.录波测试 (31)5.6.5.录波清除 (31)5.7遥控操作 (31)5.8继电器测试 (31)5.9故障重演 (32)5.9.1.重演设置 (32)5.9.2.波形选择 (32)5.10系统设置 (32)5.10.1.密码修改 (32)5.10.2.通讯参数设置 (33)5.10.2.1.串口1参数设置 (33)5.10.2.2.串口2参数设置 (33)5.10.4.信号自保持设定 (34)5.10.5.系统时钟设置 (34)5.10.6.系统冷复位操作 (34)5.11DEP-858/HP操作回路示意图 (35)5.12DEP-858/HP系列保护测控装置开孔尺寸示意图 (36)1. 概述1.1简介DEP-858/HP系列保护测控装置，是全新开发的新一代中、低压保护测控产品。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

Philips Semiconductors
Product Βιβλιοθήκη peciﬁcationEconomy Autosync Deﬂection Controller (EASDC)
FEATURES Concept features • Full Horizontal (H) plus Vertical (V) autosync capability • Completely DC controllable for analog and digital concepts • Excellent geometry control functions [e.g. automatic correction of East-West (EW) parabola during adjustment of vertical size and vertical shift] • Flexible Switched Mode Power Supply (SMPS) function block for feedback and feed forward converters • X-ray protection • Start-up and switch-off sequence for safe operation of all power components • Very good vertical linearity • Internal supply voltage stabilization • SDIP32 package. Synchronization inputs • Can handle all sync signals (horizontal, vertical, composite and sync-on-video) • Combined output for video clamping, vertical blanking and protection blanking • Start of video clamping pulses externally selectable. Horizontal section • Extremely low jitter • Frequency locked loop for smooth catching of line frequency • Simple frequency preset of fmin and fmax by external resistors • DC controllable wide range linear picture position • Soft start for horizontal driver. ORDERING INFORMATION TYPE NUMBER TDA4858 PACKAGE NAME SDIP32 DESCRIPTION plastic shrink dual in-line package; 32 leads (400 mil) GENERAL DESCRIPTION Vertical section
Philips Semiconductors
Product speciﬁcation
Economy Autosync Deﬂection Controller (EASDC)
PINNING SYMBOL PIN HFLB XRAY BOP BSENS BIN BDRV HDRV PGND VCC CLSEL EWDRV VOUT2 VOUT1 VSYNC HSYNC CLBL VPOS VAMP VSCOR EWTRP EWPAR VAGC VREF VCAP SGND HPLL1 HBUF HREF HCAP HPOS HPLL2 EWWID 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 DESCRIPTION horizontal ﬂyback input X-ray protection input B+ control OTA output; comparator input B+ control comparator input/output B+ control OTA input B+ control driver output horizontal driver output power ground supply voltage selection input for horizontal clamping trigger EW parabola output vertical output 2 (ascending sawtooth) vertical output 1 (descending sawtooth) vertical synchronization input/output (TTL level) horizontal/composite synchronization input (TTL level or sync-on-video) video clamping pulse/vertical blanking and protection output vertical shift input vertical size input vertical S-correction input EW trapezium correction input EW parabola amplitude input external capacitor for vertical amplitude control external resistor for vertical oscillator external capacitor for vertical oscillator signal ground external ﬁlter for PLL1 buffered f/v voltage output reference current for horizontal oscillator external capacitor for horizontal oscillator horizontal shift input external ﬁlter for PLL2/soft start horizontal size input Fig.2 Pin configuration.
VERSION SOT232-1
1997 Oct 27
2
Philips Semiconductors
Product speciﬁcation
Economy Autosync Deﬂection Controller (EASDC)
QUICK REFERENCE DATA SYMBOL VCC ICC ∆HPOS ∆VAMP ∆VPOS ∆VSCOR ∆VEWPAR ∆VEWWID ∆VEWTRP Tamb supply voltage supply current horizontal shift adjustment range vertical size adjustment range vertical shift adjustment range vertical S-correction adjustment range EW parabola adjustment range horizontal size adjustment range trapezium correction adjustment range operating ambient temperature PARAMETER − − 60 − 2 0.15 0.2 − 0 MIN. 9.2 − 49 ±10.5 − ±11.5 − − − ±0.5 − TYP. 16 − − 100 − 46 3.0 4.0 − 70
VPOS VAMP VSCOR RVREF CVAGC 39 kΩ 39 kΩ VOUT1 VOUT2 19 13 12 17 18 39 kΩ VAGC 22 100 22 nF kΩ 1% C 5% VCAP VREF 23 VCAP 24 100 nF 220 kΩ 220 kΩ 220 kΩ POLARITY CORRECTION VERTICAL OSCILLATOR AGC 21 EWPAR 39 kΩ 32 EWWID 39 kΩ VERTICAL SYNC INTEGRATOR EW PARABOLA 20 EWTRP 39 kΩ 11 2 EWDRV 220 kΩ 220 kΩ 220 kΩ VERTICAL POSITION VERTICAL SIZE VERTICAL OUTPUT STAGE S-CORRECTION EW parabola horizontal size EW trapeziun
VIDEO CLAMPING PULSE VERTICAL BLANKING
XRAY 6 BDRV 4 BSENS B+ CONTROL 3 BOP 5 BIN
Economy Autosync Deﬂection Controller (EASDC)
4
FREQUENCY DETECTOR COINCIDENCE DETECTOR X-RAY PROTECTION POLARITY CORRECTION PLL1 PLL2 HORIZONTAL OSCILLATOR 26 HPLL1 RHBUF RHREF (1) (1) 10 nF 2% HBUF HREF HCAP 27 30 28 29 31 HPLL2 HFLB 12 nF HDRV 1 7 27 kΩ 47 nF 220 kΩ 1.5 nF 39 kΩ HPOS
(2) B+ CONTROL APPLICATION
CLSEL 10
HSYNC (TTL level) 15
HORIZONTAL/ COMPOSITE SYNC INPUT