UT320C说明书

合集下载

M3202C M3702C 用户手册说明书

AV Component1 Component2 RGB PC HDMI/DVIPC Rear side of the product.Component2RGB PC HDMI/DVI RGB PC HDMI/DVIRGB INRGB OUTRGB IN RGB OUT RGB IN RGB OUT RGB IN RGB OUTAVComponent1Component2RGB PCHDMI/DVIWhen the BNC cable is connected simultaneously with S-Video cable, S-Video input has a priority.Component1Component2RGB PC HDMI/DVIAVComponent1Component2RGB PC HDMI/DVIConnect the video/audio cable as shown in the below figure and then connect the power cord (See page 9).RCA-PC Audio CableProductVCR/DVD/Set-top BoxHDMI to DVI Signal Cable (not included)HDMI Input (480p/576p/720p/1080i/1080p)VCR/DVD/Set-top BoxProductSelect an input signal.Press the INPUT button on the remote control to select the input signal.Or, press the INPUT botton on the bottom of the product.INPUT SETINPUTAUTO/SETHDMI Signal Cable (not included)When connecting with a HDMI to DVI signal input cable.When connecting with a HDMI signal input cable.• Select HDMI/DVI-HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals.Note : Dolby Digital is not supported.Input AVComponent1Component2RGB PC HDMI/DVIAVComponent1Component2RGB PC This is where the unit receives signals from the remote control.VividStandardMENUToggles between screen presets.: Select this option to display with a sharp image.Standard: The most general and natural screen display status.MENUBacklight: To control the brightness of the screen,adjust the brightness of LCD panel.Contrast : Adjust the difference between the light and dark levels in the picture.CoolMediumWarmUser Color Settings: Slightly purplish white. Medium: Slightly bluish white.Red / Green / BlueSet your own color levels.Gamma: Set your own gamma value. : -50/0/50On the monitor, high gamma values display whitish images and low gammavalues display high contrast images.16:9Original Widescreen mode.Adjust the screen video.PictureAuto Config. (RGB PC input only) : This button is for the automatic adjustment of the screen position, clock and phase. This function is available for analog signals only.If the picture isn't clear after auto adjustment and characters are stillClear VoiceStandardMusicClear Voice: By differentiating the human sound range from others,it helps users listen to human voices better.Standard: The most commanding and natural audio.To adjust uneven sound volumes across all channels or signals automatically to the mostIf the current time is incorrect, reset the clock manually.1) Press the MENU2) Press the button and then useIn the event of power interruption (disconnection or power failure), the clock must be reset. Once the on or off time is set, these functions operate daily at the preset time.Off time function overrides On time function if they are set to the same time.When On time is operated, input screen is turned on as it was turned off.To choose the language in which the control names are displayed. Use the buttons to selectTile mode and choose Tile alignment and set the ID of the current product to set location.Tile ModeID 1ID 2ID 3ID 4Tile mode (product 1 ~ 4) : r(2) x c(2)rowID 1ID 2ID 1ID 2ID 3ID 4ID 5ID 6ID 7ID 8ID 9ID 1ID 5ID 9ID 13ID 2ID 6ID10ID 14ID 3ID 7ID 11ID 15ID 4ID 8ID 12ID 16Adjust the horizontal size of the screen taking into account the size of the bezel.You can assign a uniqueproducts are connected for display. Specify the number (1~99) using the button。

PDM-850C系列保护测控装置使用说明书

目录第一部分保护装置使用说明 (1)一．面板指示灯说明 (1)二．装置的操作说明 (1)第二部分保护装置详细说明 (10)一．PDM-850C线路保护测控装置 (10)二．PDM-850C变压器保护测控装置 (21)三．PDM-850C母线PT保护测控装置 (31)第三部分：常见问题处理 (38)第一部分保护装置使用说明一．面板指示灯说明面板指示灯共有七个，从右到左排列顺序依次如下：（不同装置另外说明）●运行：表示装置的运行状态，正常运行时为绿色且不停的闪烁。

●电源：表示装置继电器输出电源是否正常，正常运行时为绿色且常亮。

●故障：表示装置自检是否正常，正常不显示，不正常显示红色并告警。

●合位：表示装置所控制的断路器在合闸位置，在合闸位置时显示红色，开关分闸时不亮。

●分位：表示装置所控制的断路器在分闸位置，在分闸位置时显示绿色，开关合闸时不亮。

●告警：表示装置检测的运行设备是否正常，正常运行时红灯不亮，出现告警事件红灯亮。

●事故：表示装置检测的运行设备是否正常，正常运行时红灯不亮，出现跳闸事件红灯亮。

二．装置的操作说明（一）按键使用说明↑：是液晶上光标的向上移动键，按此键光标将从下往上移动，同时，此按键也作为整定数字的增加键，按一次，数字加1；↓：是液晶上光标的向下移动键，按此键光标将从上往下移动；同时，此按键也作为整定数字的减少键，按一次，数字减1；←：是液晶上光标的向左移动键，按此键光标将从右往左移动；同时，此按键也作为保护投退状态的改变键，按一次，保护投退状况发生改变：“投”→“退”或者“退”→“投”；→：是液晶上光标的向右移动键，按此键光标将从左往右移动；同时，此按键也作为保护投退状态的改变键，按一次，保护投退状况发生改变：“投”→“退”或者“退”→“投”；复位：运行中的程序立即重新执行。

复归：按此键并“确定”后，则将液晶上显示的“事故信息”或“告警信息”消除，同时告警、事故指示灯熄灭。

若复归后，装置的告警指示灯还亮，则是此信号为持续性信号，需要处理正常后才能将此信息复归掉。

POWERTEC i250C i320C机器组装说明书

IM307011/2019REV05a POWERTEC i250C STANDARDPOWERTEC i250C ADVANCEDPOWERTEC i320C STANDARDPOWERTEC i320C ADVANCEDSpare Parts (1)Figure A. Powertec i250C/i320C STANDARD/ADVANCED Machine Assembly (2)Figure B: Powertec i250C/i320C STANDARD/ADVANCED Inside Machine Assembly (3)Figure C: Powertec i250C/i320C STANDARD/ADVANCED Wire Drive Assembly (3)Figure D, E: Powertec i250C/i320C STANDARD/ADVANCED Front Assembly (4)Miscelaneous Items (not shown in figure A, B, C, D, E) (5)Electrical Schematic (6)CODE: 50430, 50432 (6)CODE: 50431, 50433 (7)Lincoln Electric Bester Sp. z o.o.ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Polandwww.lincolnelectric.euSpare Parts - Electrical Schematic 1 Spare Parts - Electrical SchematicSpare PartsSP50430, SP50431, SP50432, SP50433 REV0510/2018ASSEMBLY PAGE NAMEP o w e r t e c M a c h i n e A s s e m b l yM a c h i n e F r o n t A s s e m b l yW i r e D r i v e A s s e m b l y & E u r o S o c k e t A s s e m b l yP o w e r t e c i 250C /i 320C S T D F r o n t A s s e m b l yP o w e r t e c i 250C /i 320C A D V F r o n t A s s e m b l y M i s c e l l a n e o u sI t e m s CODE NO.: K NO.: FIGURE NO.: A B C DE-50430 K14157-1 POWERTEC i250C STANDARD 1 1 1 1 - 1 50431 K14157-2 POWERTEC i250C ADVANCED 2 2 2 - 2 2 50432 K14158-1 POWERTEC i320C STANDARD 3 3 3 3 - 3 50433 K14158-2 POWERTEC i320C ADVANCED 4 4 4 - 4 4Figure ASpare Parts - Electrical Schematic 2 Spare Parts - Electrical SchematicFigure A. Powertec i250C/i320C STANDARD/ADVANCED Machine AssemblyItem Description Part Number QTY12345671 WELDING CABLE GRD-300A-50-5M 1 X X X X2 SIDE PANEL KIT R-1019-486-1R 1 X X X X3 COVER KIT R-3019-455-1/02R 1 X X X X4 HANDLE R-0010-292-1R 1 X X X X5 BASE, PARTITION, SHELF KIT R-3019-426-1R 1 X X X X6 SIDE COVER KIT R-0010-623-1R 1 X X X X 7FRONT AND REAR PANEL KIT R-8040-387-1R 1XXXX8 LOCK 0654-610-004R 2 X X X X 9 LEAF HINGE 0654-610-007R 2 X X X X 10 MAIN INPUT CORD R-5041-497-1R 1 X X X X 11 WHEELS 1029-660-127R 2 X X X X 12 WHEELS 1029-660-250R2 X X X XFigure BSpare Parts - Electrical Schematic 3 Spare Parts - Electrical SchematicSpare Parts - Electrical Schematic 4Spare Parts - Electrical SchematicFigure DFigure EFigure D, E: Powertec i250C/i320C STANDARD/ADVANCED Front AssemblyItem Description Part Number QTY 1 2 3 4 5 6 7 32 DISPLAY FRONT PANEL KIT R-0010-619-2R 1 X - X - 33 USER INTERFACE PCB R-6042-078-1R 1 X - X-34 KNOB 9SM22778-2 2 X - X - 35 BUTTON 9SS23055 2 X - X - 1 - X - X 36MAIN SWITCH1115-270-022R 1XXX X37 EURO SLEEVE C-1891-006-1R 1 X X X X 38 SOCKET W7690350R 2 X X X X 39 PCB R-6042-077-1R 1 - X - X 40DISPLAY FRONT PANEL KIT R-0010-618-2R 1-X-X41 LCD 0942-177-002R 1 - X - X 42 KNOB 9SM22778-32 - X - XMiscelaneous Items (not shown in figure A, B, C, D, E)Item Description Part Number QTY 1 2 3 4 5 6 7 KIT R-5041-494-1R 1 X X X X43 HARNESSESSpare Parts - Electrical Schematic 5 Spare Parts - Electrical SchematicElectrical Schematic234Spare Parts - Electrical Schematic 6 Spare Parts - Electrical SchematicSpare Parts - Electrical Schematic 7 Spare Parts - Electrical Schematic。

横河ut320说明书

横河ut320说明书横河UT320是一款高精度的温湿度计，设计用于工业、实验室和家庭应用。

本说明书将向您介绍UT320的主要特点、使用方法和注意事项。

一、主要特点：1.高精度测量：UT320采用先进的温湿度传感器，能够提供高精度的测量结果，温度测量精度为±0.5℃，湿度测量精度为±2%RH，满足各种应用的需求。

2.大屏幕显示：UT320配备了大尺寸液晶显示屏，能够清晰显示当前的温度和湿度值，便于用户进行实时监测和操作。

3.多种测量模式：UT320支持温度、湿度和露点的测量，用户可以根据需要选择不同的测量模式，满足不同场景下的测量需求。

4.数据记录功能：UT320具有数据记录功能，可以记录并保存测量结果，最多可存储100组数据。

用户可以通过USB接口将数据传输到电脑进行分析和管理。

5.背光功能：UT320配备了背光功能，在昏暗的环境下工作更加方便。

二、使用方法：1.打开设备：按下电源开关，UT320将进入待机状态，同时显示当前温度和湿度值。

2.选择测量模式：在待机状态下，按下“MODE”键可切换温度、湿度和露点的测量模式。

根据需要选择相应的模式。

3.获取测量结果：在选择了测量模式后，UT320将开始测量，并将结果显示在屏幕上。

同时，测量结果也将自动记录在设备内存中。

4.数据传输：通过USB接口将UT320连接到电脑，可以将记录的数据传输到电脑进行保存和分析。

连接电脑时，请确保UT320处于关闭状态。

5.清除数据：长按“MODE”键直至屏幕显示“CLRT”，然后按下“ENTER”键确认删除所有记录的数据。

三、注意事项：1.请勿将UT320浸入液体中，以免损坏设备。

2.在进行温度和湿度测量时，请确保设备处于稳定的环境中，远离热源和湿度变化较大的地方。

3.使用过程中，避免将UT320暴露在强光下，以免影响显示效果。

4.在插入或拔出USB接口时，请确保设备处于关闭状态，以避免意外损坏。

NEOPULSE 320 C 说明书

1-36NEOPULSE 320 C2IIIIII23D E F首次使用若检测到新版本，则会出现以上屏幕。

23警告 - 安全准则基本说明操作前，请仔细阅读说明书。

所有未在说明书内标明的修改与维护，本公司概不负责。

不按照本使用说明使用而造成的任何人身伤害或财产损失，制造商概不负责。

出现问题或有疑问，请咨询专业人员进行正确安装。

环境本设备只能用于额定板和/或手册上标明的限制范围内的焊接操作。

请严格遵守安全准则。

如使用不当或危险使用，制造商概不负责。

安装与储存机器必须在无尘、无酸、无易燃或腐蚀性物品的环境下进行。

使用时请确保空气流通。

温度范围：使用温度：-10°C ~ +40°C (+14°F ~ +104°F)储存温度：-20°C ~ +55°C (-4°F ~ 131°F)空气湿度：40°C (104°F) 时，湿度小于或等于50%20°C (68°F) 时，湿度小于或等于90%海拔：最高海拔可达1000米(3280 英尺) 。

人身安全保护电弧焊可能引发危险，造成严重人身伤害甚至死亡。

焊接使人员暴露在危险的热源，弧光辐射，电磁场（心脏起搏器佩戴者注意），触电危险，噪音和气体排放等环境下。

为了保护自身与他人的安全，请遵守以下安全说明：为了保护免受灼伤和辐射伤害，请穿着能覆盖整个身体的干净、绝缘、干燥和防火的衣服。

戴上绝缘与隔热手套。

使用具有足够防护等级的焊接护罩（取决于操作应用）。

清洁操作期间，保护双眼。

禁止佩戴隐形眼镜。

有时需要用防火窗帘划定区域，以保护焊接区域免受电弧射线，喷砂和光废物的影响。

告知焊接区域的人员不要固定弧形辐条或熔化部件，并穿着合适的衣服来保护自己。

如工作时噪音超过了规定标准，请佩戴降噪耳机（焊接区域的其他人同样需要佩戴耳机）。

手、头发及衣物须远离活动部件(风扇)。

建伍NX-220C-IS 320C-IS超小型防爆数字对讲机说明书

NX-220C-IS/320C-IS超小型防爆数字对讲机属于著名的NEXEDGE数字通信产品系列。

采用公开的NXDN数字空中接口协议，丰富的工作模式能够广泛地适应用户的通信要求。

NX-220C-IS/320C-IS已经取得中国国家防爆电气产品质量监督检验中心（CQST）的防爆认证。

可用于除煤矿外的爆炸性气体环境ⅡA类和ⅡB类，温度组别T1至T3的危险场所1区和2区以及可燃性粉尘环境ⅢA类、ⅢB类和ⅢC类的危险场所22区的无线通信。

防爆类型和等级爆炸性气体环境本质安全型“i”:Ex ib II B T3 Gb可燃性粉尘环境本质安全型“iD”:DIP A22 T T3周围环境温度: -10℃～＋60℃有关爆炸性气体环境以及可燃粉尘环境的危险场所的分类、电气设备的选型和安装要求，详细请参照国家标准GB3836.14-2000、GB3836.15-2000、GB12476.2-2010和GB12476.3-2007。

防爆认证标志（CQST Ex）贴于防爆对讲机以及配套的防爆电池的背面，表示该防爆对讲机和防爆电池已经通过了CQST防爆认证。

防爆标志旁边标注了该对讲机的防爆型式、防爆等级以及适用温度，必须配套使用JVC建伍公司指定型号的防爆电池以及遵守《防爆对讲机安全使用指南》的要求。

产品特点：体积小巧，携带轻便、灵活体积只有56×110.5×39.5mm重量只有330g液晶显示和键盘具有液晶显示屏和键盘。

可以显示ID号码或英文字符信息以及进行拨号操作。

超窄带信道, 频率利用效率高数字模式下能够以6.25kHz信道间隔工作。

是当前模拟25kHz信道的四分之一，是12.5kHz信道的二分之一,大幅度提高了频率使用效率。

数字/模拟双模双待具有数字工作模式、模拟工作模式和接收信号自适应的混合工作模式。

在混合工作模式下，当接收到模拟信号，按PTT自动以模拟信号回复；当接收到NXDN数字信号，按PTT自动以数字信号回复。

320系列万用表使用说明书

320系列万用表使用说明书（适用于＃61－320、＃61－322、＃61－324）安全“警示”与“注意”警示符号描述：“警告”警示符号告知能导致人身伤害或死亡的有害情况与行为。

“注意”警示符号告知测试时能损坏仪表或设备的情况与行为“警告”与“注意”警告：●使用表笔或探针时，保持手指在护指之后；●在打开电池仓门或表壳前，拔下表笔；●只可按本说明书或在本表能承受的保护范围内使用本表；●始终保证正确的接点，开关位置和量程；●绝不可试图当表笔接在m A接口时，测量电压;●在已知电压等级时可人工核实本表操作，否则应由本表自动测量；●不要超过本表标明的电压等级使用，包括接口之间，以及接口对地；●测量当开路电压超过保险丝保护范围时，不要试图测量电流。

可用电压挡测量所怀疑的开路电压；●只可按本说明书要求规格更换保险丝；●交流电压有效值超过30V，交流电压峰值超过42V，直流电压超过60V，应提起注意，这些电压会造成电击伤害；●为避免导致电击和受伤的错误读数，出现电池电压低的符号后，应尽快更换电池；●在测量电阻、通断、二极管或电容前，不要连接电源并要对所有高压电容器进行放电；●在有爆炸性气体或蒸气的环境中不要使用本表；●为减少火灾或电击的危险，避免本表受雨淋或受潮。

注意：●在改变播盘开关的功能位置前，要将表笔与测点断开；●当播盘开关的功能位置在电阻、二极管/通断、直流/交流mA、电容、Hz（频率）位置时，绝不可与电压源接触；●不要将本表暴露于高温高湿环境中；●绝不可用交直流mA挡测量设备中电源电路的电压，那将损坏本表及被测设备。

表上标记的符号交流。

PXUT-320C超声波探伤仪操作规程(焊缝)

PXUT-320C型全数字智能超声波探伤仪操作规程（焊缝超声检测）1、开机：开启仪器电源开关，将探头与仪器连接，仪器处于正常工作状态。

2、参数清零：按<功能>键，选择“1”，清除当前通道。

3、设置参数：在<设置>菜单中，设置探头方式、探头 K 值、晶片尺寸、探头前沿、探头频率为、工件声速、检波方式，在<选项>菜单中，设置判废偏移、定量偏移、评定偏移、表面补偿。

按<确定>键保存并退出设置。

4、调零：按<零点/调校> 键两次，进入测试菜单，按“1”测<零点声速>。

探头放在CSK-IA试块上找50和100的最高波，稳住探头，按仪器提示点安确认键，并用钢尺量出探头到弧100的距离，用100-S的前沿值L。

按仪器提示输入探头的一次反射体弧50的距离即（50-L）屏测折射角度：按<零点/调校> 键两次，进入测试菜单，按“2”测折射角度。

根据待测工件输入反射体直径、反射体深度，探头 K 值标称值，确认后将探头在 CSK-IA 试块上移动，使Ф50 孔的最高回波出现在进波门内（如不在可移门）时确认，按<确定>键确认存储测试值，进入制作 DAC。

5、制作 DAC：按<零点/调校> 键两次，进入测试菜单，按“3”制作 DAC。

零点调好后就可制作 DAC。

按<调校>键，选“3. 制作 DAC”，按<N>键直接制作DAC 曲线，最大探测深度输入 70mm，反射体直径输入 1.0mm，反射体长度输入6mm，确认后将探头在 CSK-IIIA 试块上移动，仪器自动调节增益使深为 10mm 孔的最高回波在80%，在参数区有“DAC”三字提示时（如为其它提示内容，可按<返回>键）再，按加号键，让光标移至 10mm 孔的回波上，在参数区将同步显示该回波的各项参数，按<↵>键确认此回波，屏幕上将显示一条与该波峰同高的直线；再移动探头，寻找深30mm 孔的最高回波，按加号键，将光标移至30mm 孔的回波上，按<确定>键确认；再移动探头，寻找深50mm 孔的最高回波，按加号键，将光标移至50mm 孔的回波上，按<确定>键确认；屏幕上显示由 10mm、 30 mm 和 50mm 三孔所得的DAC 母线，点采集完成且经确认存储后，DAC 母线即制作完成。

320使用说明书

危险报警灯要打开危险报警灯时，按下此开关，所有转向信号灯都闪烁。

若要将其关闭，则再按一下此开关。

车辆不得不停在可能会引起交通事故的地点时，须打开危险报警灯来警告其他驾驶员注意。

尽可能将车停在远离主干道的安全地带。

为了防止蓄电池放电，在发动机没有运转时，不要长时间开灯。

注意高位制动灯（选装）踩下制动踏板时，该灯与后制动灯同时点亮，警告车辆处于制动状态，防止意外事故发生。

前雾灯要打开前雾灯时，转动左组合开关手柄上的旋钮，旋至小灯或大灯位置，按下前雾灯开关，前雾灯将点亮。

后雾灯转动左组合开关手柄上的旋钮，旋至小灯或大灯位置，且按下后雾灯开关，后雾灯将点亮。

组合仪表上的后雾灯指示灯将指示后雾灯处于打开的状态。

在打开前雾灯时，前顶灯需要点亮前顶灯时，可将开关如图示滑移。

前顶灯开关具有以下位置：“ON”—前顶灯处于常开状态“OFF”—前顶灯处于关闭状态“o”—任一车门打开时，前顶灯点亮。

所有车门都关闭后前顶灯熄灭。

使用前挡风玻璃刮水器时，按图示将操纵杆拨至所需要的设定位置。

钥匙必须在“Ⅱ”的位置前挡风玻璃刮水器和洗涤液仅对挡风玻璃作一次刮扫时，把操纵杆向上抬并释放。

要喷射洗涤液，将操纵杆向上推在喷射了洗涤液之后，应立即释放操纵杆，刮水器还将工作数次。

在寒冷结冰的天气，使用清洁器之前，可先按除霜对挡风玻璃进行加温。

这样可以防止清洁液冻结在挡风玻璃上而影响视线。

挡风玻璃在干燥的状态时，不得使用刮水器，否则会刮伤玻璃。

注意使用后挡风玻璃刮水器时，按图示将操纵杆拨至所需要的设定位置。

钥匙必须在“Ⅱ”的位置后挡风玻璃刮水器和洗涤液（选装）要喷射洗涤液，将操纵杆向下推在喷射了洗涤液之后，应立即释放操纵杆，刮水器还将工作一次。

后除霜按钮要将后风窗进行除雾或除霜时，按此按钮。

点火开关必须在“Ⅱ”的位置。

后风窗内侧的电热丝将迅速使后风窗表面清晰。

指示灯将发亮，指示除霜在工作中。

再按一次开关，除霜关闭。

后除霜具有延迟功能，除霜器操作约15分钟之后，这个系统将自动关闭。

POWERTEC i250C、i320C、i380C、i450C产品说明书

IM314909/2021REV02 POWERTEC® i250C, i320C STANDARDPOWERTEC® i250C, i320C ADVANCEDPOWERTEC® i380C, i450C ADVANCED Spare Parts (1)Figure A: Machine Assembly (2)Figure B, C: Inside Machine Assembly (5)Figure D: Wire Drive Assembly (6)Figure E: Front Assembly (7)Miscelaneous Items (not shown in figure A, B, C, D, E, F) (7)Electrical Schematic (8)CODE: 50554, 50556 (8)CODE: 50555, 50557, 50558 (9)CODE: 50559 (10)Lincoln Electric Bester Sp. z o.o.ul. Jana III Sobieskiego 19A, 58-260 Bielawa, Polandwww.lincolnelectric.euSpare Parts - Electrical Schematic 1 Spare Parts - Electrical SchematicSpare PartsSP50554, SP50555, SP50556, SP50557, SP50558, SP50559 REV0006/2020ASSEMBLY PAGE NAMEM a c h i n e A s s e m b l yI n s i d e M a c h i n e A s s e m b l yI n s i d e M a h i n e A s s e m b l yW i r e D r i v e A s s e m b l yF r o n t A s s e m b l y M i s c e l l a n e o u sI t e m s CODE NO.: K NO.: FIGURE NO.: A B C D E 50554 K14284-1 POWERTEC ® i250C STANDARD 1 1 - 1 1 1 50555 K14285-1 POWERTEC ® i250C ADVANCED 2 2 - 2 2 2 50556 K14286-1 POWERTEC ® i320C STANDARD 3 3 - 3 3 3 50557 K14287-1 POWERTEC ® i320C ADVANCED 4 4 - 4 4 4 50558 K14288-1 POWERTEC ® i380C ADVANCED 5 5 - 5 5 5 50559 K14289-1 POWERTEC ® i450C ADVANCED 6-6666Figure A: Machine AssemblyItem Description Part Number QTY 1 2 3 4 5 6 71 WELDINGCABLE D-5578-176-4R 1 X X X X WELDINGCABLE R-5041-024-1R 1 X WELDINGCABLE R-5041-024-2R 1 X2 SIDE PANEL KIT includes:T-8040-077-1R1 X X X X X XLEFTSIDEPANEL 1 X X X X X X UPPERSIDEPANEL 1 X X X X X X BOTTOMSIDEPANEL 1 X X X X X X PLATE 1 X X X X X X LABEL-ROLLSCOLOURS 1 X X X X X X LABEL - POWERTEC® 2 X X X X X X LABEL–LINCOLNELECTRIC 2 X X X X X X3 COVER KIT includes:T-8040-078-1R1 X X X X X XCOVER 1 X X X X X X SHELF 1 X X X X X X WARNINGLABEL 1 X X X X X X4 CONTROL PANEL COVER T-8040-079-1R 1 X X5 BASE, PARTITION, SHELF KIT includes:T-8040-080-1R1 X X X XBASEASSEMBLY 1 X X X X PARTITIONASSEMBLY 1 X X X X USBLABEL 1 X X X X WARNINGLABEL 1 X X X X SHELF 1 X X X X FUSELABEL 1 X X X X BRACKET 1 X X X X5 BASE, PARTITION, SHELF KIT includes:T-8040-091-1R1 XBASEASSEMBLY 1 X PARTITIONASSEMBLY 1 X USBLABEL 1 X WARNINGLABEL 1 X SHELF 1 X FUSELABEL 1 X BRACKET 1 X5 BASE, PARTITION, SHELF KIT includes:T-8040-081-1R1 XBASEASSEMBLY 1 X PARTITIONASSEMBLY 1 X USBLABEL 1 X WARNINGLABEL 1 X SHELF 1 X FUSELABEL 1 X BRACKET 1 XSpare Parts - Electrical Schematic 2 Spare Parts - Electrical Schematic6 FRONT AND REAR PANEL KIT:T-8040-082-1R1 X X X XFRONT PANEL ASSEMBLY 1 X X X X REARPANELASSEMBLY 1 X X X X FRONT HANDLE COMPLETE 1 X X X X BACKPANEL 1 X X X X COVER 1 X X X X GASLABEL 1 X X X X CHAIN 1 X X X X6 FRONT AND REAR PANEL KIT:T-8040-083-1R1 XFRONTPANELASSEMBLY 1 X REARPANELASSEMBLY 1 X FRONTHANDLECOMPLETE 1 X INLABEL 1 X OUTLABEL 1 X IN/OUTLABEL 1 X BACKPANEL 1 X COVER 1 X GASLABEL 1 X CHAIN 1 X6 FRONT AND REAR PANEL KIT:T-8040-092-1R1 XFRONTPANELASSEMBLY 1 X REARPANELASSEMBLY 1 X FRONTHANDLECOMPLETE 1 X INLABEL 1 X OUTLABEL 1 X IN/OUTLABEL 1 X BACKPANEL 1 X COVER 1 X GASLABEL 1 X CHAIN 1 X7 LOCK 0654-610-004R 2 X X X X X X8 LEAFHINGE 0654-610-007R 2 X X X X X X 9 MAININPUTCORD R-5041-497-1R 1 X X X X X9 MAININPUTCORD R-5041-497-2R 1 X10 WHEELS 1029-660-127R 2 X X X X X X11 WHEELS 1029-660-250R 2 X X X X X X12 WATER CONNECTION KIT: T-8040-084-1R 1 X X COOLINGHOSES 2 X X COUPLINGRECTUS 4 X X THREADADAPTER 4 X X ORIENTING ELBOW MALE ADAPTOR 2 X X STRAIGHT MALE ADAPTOR 2 X X13 BUMPERKIT T-8040-047-1R 2 X XSpare Parts - Electrical Schematic 3 Spare Parts - Electrical SchematicSpare Parts - Electrical Schematic 4 Spare Parts - Electrical SchematicFigure B, C: Inside Machine AssemblyItem Description Part Number QTY 1 2 3 4 5 6 714 TRANSFORMERANDCHOKE R-8040-420-1R 1 X X X X X TRANSFORMER R-4034-175-2R 1 X15 INVERTERBOARD R-6042-079-1R 1 X X X X X INVERTERBOARD T-8040-022-1R 1 X16 HALLSENSOR W4900004R 1 X X X X X X17 FAN W66X1369R 2 X X X X X FAN R-8040-433-1R 2 X18 INPUTFILTER Y051-1R 1 X X X X X INPUTFILTER Y056-1R 1 X19 SOLENOID 0972-423-040R 1 X X X X X X20 CABLERELIEF 1361-599-674R 1 X X X X X X21 FUSESOCKET 1158-632-032R 1 X X X X X X FUSE 1A 400V 1158-660-010R 1 X X X XFUSE 2A 400V 1158-660-003R 1 X X22 PCBOARD R-6042-081-1R 1 X X X X X X23 WIRESPOOLHUB 0744-000-335R 1 X X X X X X24 PLASTICNUT 0744-000-336R 1 X X X X X X25 USBSOCKET 1158-641-061R 1 X X X X26 SWITCH 1115-280-004R 1 X X X X X X27 THREEPHASEBRIDGE W4100021R 1 X X X X X X28 CONTROLBOARD R-6042-080-1R 1 X CONTROLBOARD R-6042-080-2R 1 XCONTROLBOARD R-6042-082-1R 1 XCONTROLBOARD R-6042-082-2R 1 XCONTROLBOARD R-6042-087-1R 1 X CONTROLBOARD R-6042-089-1R 1 X29 OUTPUTBRIDGE R-8040-388-1R 1 X X X X X OUTPUTBRIDGE T-8040-023-1R 1 X30 LEDMODULE R-5041-508-1R 2 X X X X X X31 CHOKE R-8040-441-1R 1 X32 SOCKETASSEMBLY T-8040-085-1R 2 X XSpare Parts - Electrical Schematic 5 Spare Parts - Electrical SchematicSpare Parts - Electrical Schematic 6 Spare Parts - Electrical SchematicMiscelaneous Items (not shown in figure A, B, C, D, E, F)Item Description Part Number QTY 1 2 3 4 5 6 7 46 HARNESSESKIT T-8040-086-1R 1 X X X X47 HARNESSESKIT T-8040-087-1R 1 X48 HARNESSES KIT T-8040-088-1R 1 XSpare Parts - Electrical Schematic 7 Spare Parts - Electrical SchematicElectrical SchematicSpare Parts - Electrical Schematic 8 Spare Parts - Electrical Schematic234Spare Parts - Electrical Schematic 9 Spare Parts - Electrical Schematic234Spare Parts - Electrical Schematic 10 Spare Parts - Electrical Schematic。

Caterpillar 320 海滩挖掘机高性能与低燃料消耗说明书

Cat® 320Hydraulic ExcavatorHigh Performance with Lower Fuel Consumption• Use up to 25 percent less fuel than the Cat 320F excavator.• Increase operating effi ciency up to 45 percent with standardCat Connect technologies that lower operator fatigue and youroperating costs, including fuel consumption and daily maintenance.• The C4.4 ACERT™ engine can run on biodiesel up to B20 and meetsU.S. EPA Tier 4 Final and EU Stage IV emission standards with anaftertreatment system that requires no maintenance or downtime.• The advanced hydraulic system provides the optimum balanceof power and effi ciency while giving you the control you needfor precise digging requirements.• Match the excavator to the job with power modes; let Smartmode automatically match engine and hydraulic power to diggingconditions.• Auxiliary hydraulic options give you the versatility to use a widerange of Cat attachments.• Available SmartBoom™ lets the boom freely travel up and downwithout using any pump fl ow so operators can focus on stick andbucket work. The benefi ts are reduced operator stress and reducedfuel consumption.• Don’t let the temperature stop you from working. The excavatorhas a standard ambient temperature capability of 46° C (115° F) andoptional high-ambient capability of 52° C (125° F). Standard coldstart capability is –32° C (–25° F).Boost Effi ciency and Boost Productivitywith Integrated Cat Connect Technologies• Boost productivity up to 45 percent versus traditional gradingwith standard Cat GRADE with 2D system – includes indicate-onlyand laser capability.–Dig with guidance to depth, slope, and horizontal distanceto grade.–The 2D system is upgradable to Cat GRADE with Advanced 2Dor Cat GRADE with 3D.• Standard Grade Assist:–Stay on grade – simply and effortlessly – with single-lever digging.–Set your desired bucket angle and let Bucket Assist automaticallymaintain the angle in sloping, leveling, fi ne grading, and trenchingapplications for easy, accurate, and fast jobs.–Keep the tracks on ground in lifting and hard digging withBoom Assist.–Automatically stop excavator swing at operator-defi ned setpoints in truck loading and trenching applications with SwingAssist, which will help you use less effort and consume less fuel.• Standard Cat PAYLOAD on-board weighing system:–Achieve precise load targets and increase loading effi ciencywith on-the-go weighing and real-time estimates of your payloadwithout swinging.–Track your daily productivity such as truck target weights andload/cycle counts.–Calibration can be performed in a matter of minutes.–Combine Payload with VisionLink® and remotely manage yourproduction targets.• Upgrade to optional Cat GRADE with Advanced 2D:–Create and edit grade designs with ease on a second high-resolution 254 mm (10 in) touchscreen monitor.• Upgrade to optional Cat GRADE with 3D:–Create and edit designs with ease and see the front linkage’sfull range of motion on a second high-resolution 254 mm (10 in)touchscreen monitor.–Know the excavator’s exact position relative to GPS andGLONASS systems.–The machine automatically compensates for excavator pitchand roll caused by sloping ground conditions.• Standard Product Link™ provides location, machine hours, fuelusage, productivity, idle time, diagnostic codes, and other machinedata on demand through VisionLink online interface, helping youimprove job site effi ciency with lower operating costs.The Cat® 320 excavator brings premium performance with simple-to-use technologies like Cat GRADE with 2D, Grade Assist, and Payload – all standard equipment from the factory to boost your operator effi ciencies up to 45 percent. Combine these features with a new cab, longer maintenance intervals that lower your maintenance costs up to 15 percent, and a power system that reduces fuel consumption by up to 25 percent and you have a low-cost-per-unit-of-production excavator that’s perfect for medium- to heavy-duty applications. Not all features available in all regions. Consult your Cat dealer for specifi c confi gurations available in your region.Cat® 320 Hydraulic ExcavatorWork in Comfort in the All-New Cab• Choose between Comfort and Deluxe cabs – both with automatic climate control.• Sit in wide seats that adjust for all size operators; stay warm with the Deluxe heated seat.• Enjoy wide spacing between consoles for a more comfortable environment.• Get in and out of the cab easier using the tip-up left console (Deluxe cab only).• Advanced viscous mounts reduce cab vibration up to 50 percent over previous excavator models.• Control the excavator comfortably with easy-to-reach controlsall located in front of you.• Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, document holder, bottle holder, and coat hook are also provided.• Use the standard radio’s USB ports and Bluetooth® technologyto connect personal devices and make hands-free calls.Simple to Operate• Start the engine with a push button; use a Bluetooth key fob, smartphone app, or the unique Operator ID function.• Program each joystick button, including response and pattern, using Operator ID; it will also remember climate control fanand radio settings.• Navigate quickly on the standard high-resolution 203 mm(8 in) touchscreen monitor, or with the optional 254 mm (10 in) touchscreen monitor, or with the aid of the jog dial control.• A second 254 mm (10 in) monitor is available for the advanced grade control.• Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fi ngertips in the touchscreen monitor.Maintenance• Expect up to 15 percent less maintenance cost than the 320E. (Savings calculated over 12,000 machine hours.)• Do all daily maintenance at ground level.• Check engine oil level quickly and safely with the new ground-level engine oil dipstick; fi ll and check engine oil on top of the machine with a conveniently located second dipstick.• Track your excavator’s fi lter life and maintenance intervals via the in-cab monitor.• Do no required maintenance on the Cat Clean Emissions Module.• Change all fuel fi lters at a synchronized 500 hours.• Expect the new air intake fi lter with precleaner to last up to1,000 hours – a 100 percent increase over the previous fi lter.• The new hydraulic oil fi lter provides improved fi ltration performance, anti-drain valves to keep oil clean when the fi lter is replaced, and longer life with a 3,000 hour replacement interval – 50 percent longer than previous fi lter designs.• The new high-effi ciency electric cooling fans only run when needed and reverse to keep cores free from debris.• S·O·S SM ports simplify maintenance and allow for quick, easy extraction of fl uid samples for analysis.Safety• Work safely under structures or near traffi c with the standard 2DE-fence feature integrated right out of the factory, which prevents any part of the excavator from moving outside operator-defi ned set points to avoid hazards and job site accidents.• Access 100 percent of daily maintenance points from ground level – no need for you to climb on top of the excavator.• The standard ROPS cab meets ISO 12117-2:2008 requirements.• Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab pillars, larger windows, and a fl at engine hood design.• The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position.• Ground-level shut-off switch stops all fuel to the engine when activated and shuts down the machine.• A rearview camera is standard, and a right-side-view camerais optional. Upgrade to 360° visibility and you’ll easily visualize objects and personnel around the excavator in a single view.• New right-hand service platform design provides easy, safe, and quick access to upper service platform; the service platform steps use anti-skid punch plate to prevent slipping.• Available boom and stick lowering check valves prevent reversefl ow, keeping your front linkage securely in place should the hydraulic system unexpectedly lose power.• The handrails comply with ISO 2867:2011 requirements.• The lower frame meets ISO 15818:2017 lifting and tie-down requirements.Cat® 320 Hydraulic Excavator Standard and Optional EquipmentStandard and optional equipment may vary. Consult your Cat dealer for details.Standard Optional CABROPS, standard sound suppression9 Mechanically adjustable seat9Air-adjustable seat with heat (Deluxe only)9 High-resolution 203 mm (8 in)LCD touchscreen monitor9High-resolution 254 mm (10 in)LCD touchscreen monitor9 CAT CONNECT TECHNOLOGYCat Product Link9Cat GRADE with 2D9Cat GRADE with Advanced 2D(not available on SLR)9 Cat GRADE with 3D (not available on SLR)9 Cat GRADE with Assist9Cat PAYLOAD9ENGINEThree selectable power modes9Auto engine idle shutdown946° C (115° F) ambient cooling capacity952° C (125° F) high-ambient cooling capacity9–32° C (–25° F) cold start capability9Reversing electric cooling fans9Biodiesel capability up to B209 HYDRAULIC SYSTEMBoom and stick regeneration circuits9Boom and stick lowering check valves9 Auto hydraulic warm up9Auto two-speed travel9Boom and stick drift reduction valve9Hammer return fi lter circuit9 Combined fl ow/high-pressureauxiliary circuit9 Medium-pressure circuit9 Quick coupler circuit for Cat Pin Grabber9Standard Optional BOOM AND STICKS5.7 m (18'8") reach boom, 2.9 m (9'6") stick98.85 m (29'0") SLR boom, 6.28 m (20'7")SLR stick9UNDERCARRIAGE AND STRUCTURES600 mm (24") triple grouser shoes9 700 mm (28") triple grouser shoes9 790 mm (31") triple grouser shoes9 900 mm (35") triple grouser shoes9Tie-down points on base frame94200 kg (9,300 lb) counterweightfor HD boom and stick94700 kg (10,400 lb) counterweightfor SLR boom and stick9 ELECTRICAL SYSTEMTwo 1,000 CCA maintenance-free batteries9 Programmable time-delay LEDworking lights9LED chassis light, left-hand/right-handboom lights, cab lights9SERVICE AND MAINTENANCESampling ports for Scheduled Oil Sampling(S·O·S)9Ground-level and platform-level engineoil dipsticks9Remote fl ash9SAFETY AND SECURITYRearview camera9Right-hand-side camera9*9* Right-hand mirror9360° visibility9 Ground-level engine shutoff switch9Right-hand handrail and hand hold9Signaling/warning horn9*Europe standard; other regions optional.Cat® 320 Hydraulic ExcavatorEngine Model Cat C4.4 ACERT Gross Power – ISO 14396/SAE J1995122 kW164 hp Net Power – ISO 9249/SAE J1349121 kW162 hp Engine RPMOperation1,650 rpmTravel1,800 rpmBore105 mm 4 in Stroke127 mm 5 in Displacement 4.4 L 269 in3Main System – Maximum Flow (Implement)429 L/min113 gal/min Maximum Pressure – Equipment – Normal35 000 kPa5,075 psi Maximum Pressure – Equipment –Heavy Lift Mode38 000 kPa5,510 psi Maximum Pressure – Travel34 300 kPa4,974 psi Maximum Pressure – Swing26 800 kPa3,886 psiOperating Weight22 700 kg50,100 lb • 5.7 m (18'8") reach boom, 2.9 m (9'6") reach stick, HD 1.19 m3 (1.56 yd3) bucket, 790 mm (31") shoes, 4.2 mt (9,300 lb) counterweight.Fuel Tank345 L86.6 gal Cooling System35 L9.2 gal Engine Oil15 L 4 gal Swing Drive (each)7 L 1.8 gal Final Drive (each) 6 L 1.6 gal Hydraulic System (including tank)240 L63.4 gal Hydraulic Tank128 L33.8 gal DEF Tank40 L10.6 gal Boom Reach 5.7 m (18'8") Stick Reach 2.9 m (9'6") Bucket 1.19 m3 (1.56 yd3) Shipping Height (top of cab)2960 mm9'9" Handrail Height2950 mm 9'8" Shipping Length9530 mm 31'3" Tail Swing Radius2830 mm9'3" Length to Center of Rollers3650 mm 12'0" Ground Clearance470 mm1'7" Track Gauge2380 mm7'9" Transport Width – 790 mm (31") shoes3170 mm10'5" Counterweight Clearance1050 mm3'5"Boom Reach 5.7 m (18'8") Stick Reach 2.9 m (9'6") Bucket 1.19 m3 (1.56 yd3) Maximum Digging Depth6720 mm22'1" Maximum Reach at Ground Level9860 mm32'4" Maximum Cutting Height9370 mm30'9" Maximum Loading Height6490 mm21'3" Minimum Loading Height2170 mm7'1" Maximum Depth Cut for 2440 mm (8'0")Level Bottom6550 mm21'6" Maximum Vertical Wall Digging Depth5190 mm17'0" Bucket Digging Force (ISO)150 kN33,721 lbf Stick Digging Force (ISO)106 kN23,830 lbf Bucket Digging Force (SAE)134 kN30,124 lbf Stick Digging Force (SAE)103 kN23,155 lbfTechnical SpecificationsFor more complete information on Cat products, dealer services, and industry solutions, visit us on the web at © 2017 CaterpillarAll rights reservedMaterials and specifi cations are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options.CAT, CATERPILLAR, , their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.AEXQ2190 (07-2017)Build Number: 07A (North America, Europe, ANZ)。

dell optiplex 320快速参考指南说明书

NOTE: Additional information may ship with your computer.
What Are You Looking For?
• A diagnostic program for my computer • Drivers for my computer • My computer documentation • My device documentation • Desktop System Software (DSS)
Using the Drivers and Utilities CD . . . . . . . . . . . . . . . . . . . . . . . . 42
Index 43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTE: Drivers and documentation updates can be found at .
Dell™ Product Information Guide
Quick Reference Guide
5
What Are You Looking For? • How to remove and replace parts • Specifications • How to configure system settings • How to troubleshoot and solve problems
If you purchased a Dell™ n Series computer, any references in this document to Microsoft® Windows® operating systems are not applicable.

卡特320C保险丝说明书

打开机器左侧的前检修门。

图1保险丝面板在断路器面板上。

打开保险丝检视盖以检视保险丝。

保险丝-保险丝－保险丝保护电路系统，以避免由于电路超负载而引起的损坏。

如果保险丝熔断应更换。

如果新保险丝熔断，应检查电路和/或修理电路。

注意：一定要换上与拆下的保险丝同一类型、相同容量的保险丝。

否则会损坏电路系统。

注意：如果需要经常更换保险丝，则电路系统可能存在问题。

更换保险丝时，使用存放在保险丝面板上的保险丝拉出器。

在保险丝面板上装有3根5安培，6根10安培、3根15安培和2根30安培的备用保险丝。

下面列出保护各电路的保险丝。

并包括每根保险丝的安培值。

图2 (1) 备用件- 5 Amp(2) 备用件- 10 Amp(3) 备用件- 10 Amp(4) 备用件- 15 Amp(5) 备用件- 15 Amp(6) 备用件- 30 Amp(7) 加热器或空调器风扇(如有配备）- 15 Amp(8) 计时器继电器- 10 Amp(9) 喇叭- 10 Amp(10) 驾驶室灯(如有配备) - 10 Amp(11) 驾驶室棚顶灯和收音机记忆装置- 10 Amp(12) 发动机起动开关- 10 Amp(13) 发动机控制器或泵控制器- 10 Amp(14) 动臂灯- 10 Amp(15) 选装部件阀控制装置(如有配备) - 15 Amp(16) 备用件- 15 Amp(17) 备用件- 5 Amp(18) 电动加燃油泵(如有配备) - 30 Amp(19) 空调器(如有配备)或驾驶室加热器- 15 Amp(20) 收音机(如有配备)和开关板- 5 Amp(21) 窗户清洗器和雨刷- 10 Amp(22) 下部窗户清洗器(如有配备)和下部窗户雨刷(如有配备) - 10 Amp(23) 备用开关和监测器控制器- 5 Amp(24) 点烟器- 10 Amp(25) 底盘灯- 10 Amp(26) 座椅加热器(如有配备) - 5 Amp(27) 12伏7安培转换器1 - 10 Amp(28) 12 伏7安培转换器2 - 10 Amp(29) 选装部件电磁线圈- 10 Amp(30) 快速连接器(如有配备) - 5 Amp(31) 电动窗(如有配备) - 15 Amp(32) 交流发电机调节器- 5 Amp(33) 驾驶室风扇(如有配备) - 5 Amp(34) 辅助回路(选装部件) - 10 Amp(35) 备用件- 5 Amp(36) 备用件- 10 Amp(37) 备用件- 10 Amp(38) 备用件- 15 Amp。

YZC-320C称重传感器

YZC-320C称重传感器YZC-320C称重传感器南创电子科技传感器事业部内部使用资料单剪切式称重传感器:YZC-3/0.5T,YZC-3/1T,YZC-3/2T,YZC-3/3T,YZC-3/5T,YZC-3/10T,YZC-3/20T,YZC-3/30T,YZC -3/50T,YZC-320/0.5T,YZC-320/1T,YZC-320/2T,YZC-320/3T,YZC-320/5T,YZC-320/10T,YZC-320/1.5T, YZC-320/2.5T,YZC-320/7.5T,YZC-320H/0.5T,YZC-320H/1T,YZC-320H/2T,YZC-320H/3T,YZC-320H/5T,YZC-320H/10T,YZ C-320H/1.5T,YZC-320H/2.5T,YZC-320H/7.5T,YZC-320SH/0.5T,YZC-320SH/1T,YZC-320SH/2T,YZC-320SH/3T,YZC-320SH/5T,YZC-320SH/ 10T,YZC-320SH/1.5T,YZC-320SH/2.5T,YZC-320SH/7.5T,YZC-322H/250lb,YZC-322H/500lb,YZC-322H/750lb,YZC-322H/1klb,YZC-322/250lb,YZC-322/500lb,YZC-322/750lb,YZC-322/1klb,YZC-323H/0.2t,YZC-323H/0.25t,YZC-323H/0.3t,YZC-323H/0.5t,YZC-323H/1t,YZC-323H/2t,Y ZC-323H/2.5t,YZC-323H/3t,YZC-323H/5t,YZC-323H/7.5t,YZC-323H/10t,YZC-323/0.2t,YZC-323/0.25t,YZC-323/0.3t,YZC-323/0.5t,YZC-323/1t,YZC-323/2t,YZC-323/2. 5t,YZC-323/3t,YZC-323/5t,YZC-323/7.5t,YZC-323/10t,YZC-324A/500kg,YZC-324A/750kg,YZC-324A/1t,YZC-324A/2t,YZC-324B/500kg,YZC-324B/ 750kg,YZC-324B/1t,YZC-324B/2t,YZC-325/1t,YZC-325/2t,YZC-326/1t,YZC-322/3t,YZC-326/0.6t,YZC-334/1t,YZC-334/2t,YZC-334/3t,YZC-381/80KN,S型称重传感器:YZC-516/20kg,YZC-516/30kg,YZC-516/50kg,YZC-516/100kg,YZC-516/200kg,YZC-516/250kg, YZC-516/300kg,YZC-516/500kg,YZC-516/1t,YZC-516/1.5t,YZC-516/2.5t,YZC-516/3.5t,YZC-516/7.5t,YZC-516/10t,YZC-516A/20kg,YZC-516A/30kg,YZC-516A/50kg,YZC-516A/100kg,YZC-516A/200kg,YZC-5 16A/250kg,YZC-516A/300kg,YZC-516A/500kg,YZC-516A/1t,YZC-516A/1.5t柱式传感器:YZC-818/10t,YZC-818/20t,YZC-818/25t,YZC-818/30t,YZC-828/10t,YZC-828/20t,YZC-828/30t,YZC-828/50t应变计单片：BF350-3AA(23)RBF350-3HA-A(11)MBF350-2FG(11)K-6.0BF1000-2GB-A(23)J-7.0电子秤：TCS-1,TCS-2,TCS-3,TCS-4,TCS-5,TCS-6GCF便携式轴重台10T,20T接线盒：GC-1,GC-2,GC-3,GC-4杆端关节轴承压头附件YZC-320C称重传感器YZC-320称重传感器，适用于各类电子称重设备；--灵敏度Sensitivity：2.0±0.002mV/V--推荐激励电压Recommend，excitation：10~12VDC--最大激励电压Maximun，excitation：15VDC--可满足25㎏～30t;100lb～20Klb量程范围内的测量。

Powertec i250C i320C机器集装箱说明书

IM3070 06/2020 REV07POWERTEC i250C STANDARD POWERTEC i250C ADVANCED POWERTEC i320C STANDARDPOWERTEC i320C ADVANCEDSpare Parts (1)Figure A. Powertec i250C/i320C STANDARD/ADVANCED Machine Assembly .......................................... 2 Figure B: Powertec i250C/i320C STANDARD/ADVANCED Inside Machine Assembly ............................... 3 Figure C: Powertec i250C/i320C STANDARD/ADVANCED Wire Drive Assembly ....................................... 3 Figure D, E: Powertec i250C/i320C STANDARD/ADVANCED Front Assembly ........................................... 4 Miscelaneous Items (not shown in figure A, B, C, D, E) ................................................................................ 5 Electrical Schematic (6)CODE: 50430, 50432 ..................................................................................................................................... 6 CODE: 50431, 50433 . (7)Lincoln Electric Bester Sp. z o.o.ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Polandwww.lincolnelectric.euSpare Parts - Electrical Schematic 1 Spare Parts - Electrical SchematicSpare PartsSP50430, SP50431, SP50432, SP50433 REV0510/2018ASSEMBLY PAGE NAMEP o w e r t e c M a c h i n e A s s e m b l yM a c h i n e F r o n t A s s e m b l yW i r e D r i v e A s s e m b l y & E u r o S o c k e t A s s e m b l yP o w e r t e c i 250C /i 320C S T D F r o n t A s s e m b l yP o w e r t e c i 250C /i 320C A D V F r o n t A s s e m b l y M i s c e l l a n e o u s I t e m s CODE NO.: K NO.: FIGURE NO.:A B C D E - 50430 K14157-1 POWERTEC i250C STANDARD 1 1 1 1 - 1 50431 K14157-2 POWERTEC i250C ADVANCED 2 2 2 - 2 2 50432 K14158-1 POWERTEC i320C STANDARD 3 3 3 3 - 3 50433 K14158-2POWERTEC i320C ADVANCED444-44Figure ASpare Parts - Electrical Schematic 2 Spare Parts - Electrical SchematicFigure A. Powertec i250C/i320C STANDARD/ADVANCED Machine AssemblyItem Description Part Number QTY12345671 WELDING CABLE GRD-300A-50-5M 1 X X X X2 SIDE PANEL KIT R-1019-486-1R 1 X X X X3 COVER KIT R-3019-455-1/02R 1 X X X X4 HANDLE R-0010-292-1R 1 X X X X5 BASE, PARTITION, SHELF KIT R-3019-426-1R 1 X X X X6 SIDE COVER KIT R-0010-623-1R 1 X X X X 7FRONT AND REAR PANEL KIT R-8040-387-1R 1XXXX8 LOCK 0654-610-004R 2 X X X X 9 LEAF HINGE 0654-610-007R 2 X X X X 10 MAIN INPUT CORD R-5041-497-1R 1 X X X X 11 WHEELS 1029-660-127R 2 X X X X 12 WHEELS 1029-660-250R2 X X X XFigure BSpare Parts - Electrical Schematic 3 Spare Parts - Electrical SchematicSpare Parts - Electrical Schematic 4Spare Parts - Electrical SchematicFigure DFigure EFigure D, E: Powertec i250C/i320C STANDARD/ADVANCED Front AssemblyItem Description Part Number QTY 1 2 3 4 5 6 7 32 DISPLAY FRONT PANEL KIT R-0010-619-2R 1 X - X - 33 USER INTERFACE PCB R-6042-078-1R 1 X - X-34 KNOB 9SM22778-2 2 X - X - 35 BUTTON 9SS23055 2 X - X - 1 - X - X 36MAIN SWITCH1115-270-022R 1XXX X37 EURO SLEEVE C-1891-006-1R 1 X X X X 38 SOCKET W7690350R 2 X X X X 39 PCB R-6042-077-1R 1 - X - X 40DISPLAY FRONT PANEL KIT R-0010-618-2R 1-X-X41 LCD 0942-177-002R 1 - X - X 42 KNOB 9SM22778-32 - X - XMiscelaneous Items (not shown in figure A, B, C, D, E)Item Description Part Number QTY 1 2 3 4 5 6 7 KIT R-5041-494-1R 1 X X X X43 HARNESSESSpare Parts - Electrical Schematic 5 Spare Parts - Electrical SchematicElectrical Schematic234Spare Parts - Electrical Schematic 6 Spare Parts - Electrical SchematicSpare Parts - Electrical Schematic 7 Spare Parts - Electrical Schematic。

320C发动机

320C发动机3306型发动机气缸和气门的位置A：排气门，B进气门类型：六缸四行程；燃烧系统：直接喷油；缸径：102；行程：130；气缸数目：6；排量：6.4L；气缸布置：直列式；每个气缸的气门：2；点火次序：1、5、3、6、2、4；压缩比：17：1喷油定时：活塞到达上止点前10或16度；最小转速：900±20；从发动机的飞轮端观察曲轴的转动，曲轴转动方向：逆时针。

一般信息发动机为柴油发动机，由机械起动的距油泵操纵。

发动机气缸成直线排列。

每个气缸的缸盖总成有一个进气门和一个排气门。

每个气缸的气门有一个气门弹簧。

每个气缸有一个安装在缸体上的活塞冷却喷嘴。

活塞冷却喷嘴将润滑油喷到活塞的内表面上以冷却活塞。

活塞有两个压缩环和一个油环。

活塞高度必须正确，不要让活塞碰到缸盖。

正确的活塞高度也会保证燃油的有效燃烧，满足排量要求。

注意：订购新零件时，参考发动机标志序号以便获取正确零件。

四缸发动机的曲轴有五个主轴颈，六缸发动机的曲轴有七个主轴颈。

轴向间隙由位于中间主轴承两侧的止推垫圈控制。

正时齿轮上标有正时标记，以保证齿轮安装正确。

当1号活塞处于压缩行程的上止点时，曲轴、凸轮轴和喷油泵齿轮上作有标记的齿轮齿与中间齿轮对齐。

曲轴齿轮带动中间，中间齿轮带动凸轮轴齿轮、喷油泵和一个带动润滑油泵的较低的中间齿轮。

凸轮轴和喷油泵的运行速度为曲轴转速的一半。

缸体为整个干式气缸缸套提供支承。

当把气缸缸套安装支缸体中时，气缸缸套与缸体之间存在压配合。

油泵符合发动机排量的要求。

只有受过培训的技术人员才能调整泵的正时和高怠速。

喷油泵具有机械调速器，可以控制发动机的转速。

来自散热器底部的冷却液经过离心式冷却泵。

此泵由齿轮驱动，而冷却泵的齿轮又由喷油泵的齿轮驱动。

燃油系统燃油输油泵由凸轮轴驱动。

燃油输油泵从燃油箱中抽取燃油，以176kpa到245kpa 的压力将燃油输送到燃油滤清器。

过滤以后的燃油被送到喷油泵壳体的燃油室中。