LCD_ST7565头文件部分

LCD_ST7565头文件部分.txt喜欢我这是革命需要，知道不？！你不会叠衣服一边呆着去！以后我来叠！我一定要给你幸福，谁也别想拦着。

/*******************************************************
*
*
*此头文件中放一些引脚的定义和显示要用到的字符数组。

*
*
*
********************************************************/
#ifndef __header_h__
#define __header_h__
#ifdef __LCD_ST7565_C__
#define LCDExtern
#else
#define LCDExtern extern
#endif
#include"STC12C5A.h" //宏晶STC12C5A系列单片机的头文件。

可在宏晶官网上下。

#include<intrins.h> //空函数需要用到的系统头文件
#define uchar unsigned char
/////////////////////////////////////////// 端口定义////////////////////////////////////////
#define NOP _nop_();_nop_();_nop_();_nop_() //空函数
#define VC_ON 0x2C //升压电路启动命令
#define VR_ON 0x2A //稳压电路启动命令
#define VF_ON 0x29 //电压跟随器电路启动命令
#define data P0 //数据发送端口
sbit A0 = P4^1; //寄存器选择端
sbit RW = P4^2; //读写端
sbit E = P4^3; //使能端
sbit PSD = P4^4; //发送模式串并选择端：1为并行，0为I2C串行
sbit RES = P4^5; //LCD复位端
///////////////////////////////////////////// 字符库//////////////////////////////////////
/**********************************************
字符码的提取是通过该字符第一个字节信息在数组中的位置来提取的，
然后再在显示函数的数组中设置循环次数（i）来控制整个字符所含数据的读取终点。

道理很简单，就是提取数组中某些连续的数据，通过“初始值的数组下标”值确定起点，通过循环次数（i）控制终点。

**********************************************/
/********************* 8×8字符 *********************/
uchar xdata num88[]={
0xff,0xff,0xff,0xde,0x80,0xfe,0xff,0xff, //1 初始值的数组下标 0
0xff,0xff,0xdc,0xba,0xba,0xb6,0xce,0xff, //2 初始值的数组下标 8
0xff,0xff,0xdd,0xb6,0xb6,0xb6,0xc9,0xff, //3 初始值的数组下标 16
0xff,0xff,0xf1,0xed,0xdd,0x80,0xfd,0xff, //4 初始值的数组下标 24
0xff,0xff,0x8d,0xae,0xae,0xae,0xb1,0xff, //4 初始值的数组下标 32
0xff,0xcc,0xb6,0xb6,0xb6,0xb6,0x99,0xff, //s 初始值的数组下标 40
0xff,0xff,0xff,0xe7,0xdb,0xdb,0xe7,0xff, //o 初始值的数组下标 48
0xff,0x7f,0x7f,0x7f,0x7f,0x7f,0x7f,0xff, //- 初始值的数组下标 56
};
/******************* 8×16字符 *********************/
uchar xdata num816[]={
0xff,0x1f,0xe7,0xfb,0xfb,0xe7,0x1f,0xff, //0 初始值
0xff,0xfc,0xf3,0xef,0xef,0xf3,0xfc,0xff,
0xff,0xfb,0xfb,0x03,0x03,0xfb,0xfb,0xff, //1 初始值的数组下标 16
0xff,0xf7,0xf7,0xe0,0xe0,0xff,0xff,0xff,
0xff,0xf3,0xeb,0xdb,0xbb,0x7b,0xe3,0xff, //2 初始值的数组下标 32
0xff,0xf3,0xef,0xef,0xef,0xee,0xf1,0xff,
0xff,0xe7,0xfb,0xfb,0xfb,0x77,0x8f,0xff, //3 初始值的数组下标 48
0xff,0xf3,0xef,0xee,0xee,0xed,0xf3,0xff,
0xff,0x1f,0xdf,0xdf,0xdb,0x03,0xdb,0xff, //4 初始值的数组下标 64
0xff,0xff,0xfc,0xfb,0xf7,0xe0,0xff,0xff,
0xff,0xe7,0xfb,0xfb,0xfb,0xf7,0x0f,0xff, //5 初始值的数组下标 80
0xff,0xe0,0xee,0xed,0xed,0xee,0xef,0xff,
0xff,0x0f,0x77,0xfb,0xfb,0x77,0x8f,0xff, //6 初始值的数组下标 96
0xff,0xf8,0xf7,0xee,0xee,0xef,0xff,0xff,
0xff,0xff,0xff,0x03,0xff,0xff,0xff,0xff, //7 初始值的数组下标 112
0xff,0xe3,0xef,0xef,0xec,0xe3,0xef,0xff,
0xff,0xc7,0xbb,0x7b,0x7b,0xbb,0xc7,0xff, //8 初始值的数组下标 128
0xff,0xf1,0xee,0xef,0xef,0xee,0xf1,0xff,
0xff,0xff,0x7b,0xbb,0xbb,0x77,0x0f,0xff, //9 初始值的数组下标 144
0xff,0xf8,0xf7,0xef,0xef,0xf7,0xf8,0xff,
0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03, //■初始值的数组下标 160
0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,0xc0,
0x03,0xfb,0xfb,0xfb,0xfb,0xfb,0xfb,0x03, //□初始值的
0xc0,0xdf,0xdf,0xdf,0xdf,0xdf,0xdf,0xc0,
0x0f,0xf3,0xfd,0xfd,0xfd,0xfd,0xf3,0xff, //C 初始值的数组下标 192
0xfe,0xf9,0xf7,0xf7,0xf7,0xf7,0xfb,0xff,
0xff,0xff,0xff,0x73,0x73,0xff,0xff,0xff, // : 初始值的数组下标 208
0xff,0xff,0xff,0xfe,0xfe,0xff,0xff,0xff,
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, // o 初始值的数组下标 224
0xff,0xff,0xff,0xe7,0xdb,0xdb,0xe7,0xff, };
/******************* 16×16字符 ********************/
uchar xdata num1616[]={
0xcf,0x3f,0xff,0x00,0xfd,0x7b,0xe7,0x1d, //板初始值的数组下标 0
0xfb,0x37,0xcf,0x97,0x7b,0xf9,0xfb,0xff,
0xf7,0xf7,0xf4,0x00,0xf6,0xf7,0xff,0xc0,
0xdb,0xda,0xdb,0xbb,0x3a,0xb9,0xff,0xff,
0xdf,0xdf,0x80,0x7f,0xfd,0x81,0xbd,0xbd, //温初始值的数组下标 32
0x81,0xbd,0x81,0xbd,0xbd,0x81,0xfd,0xff,
0xf7,0xbb,0xd9,0xcf,0xfe,0xff,0x80,0xb6,
0xb6,0xb6,0xb6,0xb6,0x80,0xff,0xff,0xff,
0xfd,0xfb,0x06,0xfe,0xbd,0xbd,0x9b,0xab, //度初始值的数组下标 64
0xb7,0xab,0x9b,0xbd,0xfd,0xfc,0xfd,0xff,
0xff,0xff,0xc0,0xdb,0xdb,0xdb,0xc0,0x5a,
0x9a,0xda,0xc0,0xdb,0xd3,0x9b,0xdf,0xff };
#endif。