TBV-430M-3.0A-6826中文资料

合集下载

64位 66MHz双通道Alt OS宽带Ultra3 SCSI适配器说明书

64位 66MHz双通道Alt OS宽带Ultra3 SCSI适配器说明书

Performance
Designed as to be as flexible as HP's legendary servers, the HP StorageWorks SCSI adapter family provides support for up to 28 SCSI devices, while only taking up a single PCI slot. HP adapters deliver exceptional system performance, along with up to two separate Wide Ultra3 SCSI channels that each provide up to 64-bit/66-MHz bus-master capabilities, transferring data as fast as 160 MB/s between storage subsystem and system memory.
Option Kit Contents
Adapter Installation Guide Warranty Card Support Software CD
Warranty
Maximum: The remaining warranty of the HP product in which it is installed (to a maximum three-year limited warranty) Minimum: One-year, on-site limited warranty NOTE: Certain restrictions and exclusions apply. Consult the Customer Support Center at 1-800-345-1518 for details.

凌阳DVD解码芯片简介Sunplus_desktop

凌阳DVD解码芯片简介Sunplus_desktop

on Cde fiti n,o alProduct Introduction l nfo y隆 rDVD科Oct. 2007凌Sunplus Tech.隆 or f HD DVD(HDMI/DVB) ly SUMMARY(820X) on l, tia en id nf o C凌GAME DVD(NATIVE32 GAME/OSD GAME)科MUSIC DVD(MP3/MP4/CD KARAOKE KING+GM5)Sunplus Tech.Native32 DVD System – 2007 Over 100Native32 ELA Game From USB 2.0 Microphone0i 108 DNative32 ELA Game Song King (Midi/MP3/MP4)隆 or f ly on l, tia en id nf o CCardH科2/5.1CH GM5 SDRAM (16/64M Bit)820 2 L/T/ RDVD LoaderFLASH (4/8M Bit)Remote Native32Game Pad凌Sunplus Tech.Native32 GameMP3. True Colour. Internet Update Monthly隆 or f ly on l, tia en id nf o C凌科Sunplus Tech.Native32 ELAELA隆 or f ly on l, tia en id nf o C凌科Sunplus Tech.Mission Express隆 or f ly on l, tia en id nf o C凌科Sunplus Tech.Embed Free Game/ 羅 / /數讀/ Native32 路 Download , 行 . SDRAM 1x16Mb , Rom Code Total Size <100K Bytes.隆 or f ly on l, tia en id nf o C凌科Sunplus Tech.GAME DVD(NATIVE32 GAME/OSD GAME)隆 HD DVD(HDMI/DVB) or f SUMMARY(820X) ly on l, tia en id nf o C凌MUSIC DVD(MP3/MP4/CD KARAOKE KING+GM5)科Sunplus Tech.MP3/MP4/CD Karaoke King Video + Audio + Lyric Choose songs by:Number, SHOUPIN, English隆 or f ly Song List on l, tia Song Menu en id nf Lyric Display o CScore / Applause / iSingNow凌科Sunplus Tech.GM5(Give Me 5ch) ~ FreeDelivering music MP3 , CD in surround sound. Stereo movie content(MP4/DivX/VCD/DVD…) to 5ch. Enjoy movie for clear voice at center speaker. To maximal use your home theater 5 speakers.隆 or f 8202R/8203H ly Sunplus on DSP l, tia en id nf o C2ch Audio in 5 ch Audio Output DVD Loader CD/MP3/VCD /AC3… (Not Include: WMA) SDRAM: SDRAM: 1x16Mb or 4x16Mb 1x16Mb or 4x16Mb 凌科L/R: Source Center: Voice filter Ls/Rs: Reverberant music filterSunplus Tech.隆 or HD DVD(HDMI/DVB) f ly SUMMARY(820X) on l, tia en id nf o C凌GAME DVD(NATIVE32 GAME/OSD GAME)科MUSIC DVD(MP3/MP4/CD KARAOKE KING+GM5)Sunplus Tech.HD 1080i DVD隆 or f ly on 720p/1080i/DeInterlace l, tia en id nf o C凌480p/Non DeInterlace科Sunplus Tech.HDMI+DVB+ReceiverUSB HS/6in2 Card Demod ADC/ SPDIF in Game Pad CCIR656RF/TunerHDMI/S-Video /CVBS in隆 or f SPHE 8203 ly on l, tia en id nf o CHDMI in HDMI in TVD in TVD inCCIR 656 in210/230 210/230科Panel HDMI1/VGA/YUV/CVBS (HD2SD/1080p) Panel 8ch PWM/I2S Audio Output (iSingNow/GM5)HW JPEGT-CONDVD LoaderSDRAM SDRAM 64Mb 64MbSPI flash 8Mb SPI flash 8Mb凌Sunplus Tech.DVD(8202T)USB/3in1 Card Demod I2S/SPDIF Game Pad AV in / no AV inRF/Tuner隆 or f SPHE 8202T ly on l, tia en id nf o C6600 6600DVD LoaderSDRAM SDRAM 64MBits SDRAM SPI flash 4/8Mb SPI flash 4/8Mb 640016/64Mb 16/64Mb210 210518A/D 518A/D /519A /519A科A/D PanelS-Video in /CCIR656 CVBS 2ch/I2S Audio Output凌Sunplus Tech.T-CON Serial ChipFeature 518A 518D 519ADigital PanelA/V in隆 128 Pin or fYes Yes DC2DC(V ) ly on Others: l, 1. AV in, Support SECAMa i format t 2. Display resolution 854x480 en 3. Use external clock. (Crystal needless) id nf o CYes 64GH/GL/LEDNo YesYes科No No64 Yes凌Sunplus Tech.隆 or f HD DVD(HDMI/DVB) ly SUMMARY(820X/8104X) on l, tia en id nf o C凌GAME DVD(NATIVE32 GAME/OSD GAME)科MUSIC DVD(MP3/MP4/CD KARAOKE KING+GM5)Sunplus Tech.820X-X Serial ChipFunctionAudio USB MP4 OSD Game 8bits Game Natvie32 ADC Card02L-T2ch No No02L2ch 2.0 Yes02T2ch 2.0 Yes Yes Yes Yes No02R5.1ch 2.0 Yes Yes Yes Yes Yes No03H5.1ch HS隆 or f ly on l, tia en id nf o CYes(8M Yes Flash) No No No No No No No No No Yes Yes No No No 3in1 3in1 Demux 6600 HD JPEG/ HW JPEG HDMI Panel 1080i No No No 1080i No No No 1080i No No No 518 518 518 518/519 720p Video凌科Yes Yes Yes Yes Yes 6in1 Yes 1080p Yes Yes 518/519 NoSunplus Tech.DVD Product mapping to ICApplicationHigh end 2ch DVD High end 5.1ch DVD ReceiverChip8202L 8202R 8202TSpecial Feature128pin/HD/MP4/NeroDigital/USB/Nativ32,OSD,8bit Game 128pin/HD/GM5/iSingNow/MP4/NeroDigital/3in1 Card/USB/Native32,OSD,8bit Game 128pin/SPDIF in/3in1 Card/DVB/I2S/USB/MP4 /Native32,OSD,8bit Game 216pin/1080p/HDMI v1.2a/Motion JPEG/HD,SD PSO/5.1ch/GM5/6in1 Card 216pin/DVB/3in1 Card AUX inHDMI DVDDVD+DVB+HDMI HDMI Receiver隆 or f ly on l, tia en id nf o C8203H 8203H 8203H 凌科Sunplus Tech.。

西门子变频器M430说明书

西门子变频器M430说明书
无论故障出现在控制设备的什么地方都有可能导致重大的设备损坏甚至是严重的人身伤害即存在潜在的危险故障因此还必须采取附加的外部预防措施或者另外装设用于确保安全运行的装置即使在故障出现时也应如此例如独立的限流开关机械联锁等
MICROMASTER 430
7.5 kW - 250 kW
使用说明书
版本 10/06
有关调试的
警告
!
¾ 未经培训合格的人员在变频器的器件/系统上工作或不遵守“警告”中的有关规定,就可能造
成严重的人身伤害或重大的财产损失。只有在设备的设计、安装、调试和运行方面受过培训 的经过认证合格的专业人员才允许在本设备的器件/系统上进行工作。
¾ 输入电源线只允许永久性紧固连接。设备必须接地(按照 IEC 536 Class 1、NEC 和其它适用 的标准)。
有关维修的
警告
!
¾ 设备的维修只能由西门子公司的服务部门,西门子公司授权的维修中心或经过认证合格并得
到授权的人员进行,这些人员应当十分熟悉本说明书中提出的所有警告和操作步骤。
¾ 任何有缺陷的部件和器件都必须用相应的备件更换。
¾ 在打开设备进行维修之前,一定要断开电源。
有关拆卸和废品处理的
注意 ¾ 变频器的包装箱是可以重复使用的。请保管好包装箱以备将来使用或把它返还给制造商。 ¾ 易卸螺丝和快速插接器便于您拆卸设备的部件。您可以回收这些拆卸下来的部件,并根据地
是其第§8 节关于“带电部件上工作时允许的安全距离”的规定。实际操作时,应该使用适当 的电子器具。 ¾ 在安装和调试变频器之前,请您务必仔细阅读这些安全规则和警告,以及设备上粘贴的所有 警示标志。确保警示标志置于醒目的地方,并更换已经脱落或损坏的标志。
MICROMASTER 430 使用说明书

奥林匹斯 OM-System 电动驱动器说明书

奥林匹斯 OM-System 电动驱动器说明书

The Easily Assembled OM-System Motor Drive Units
CD Motor Drive 1 T he heart of t he group is t his basic motor drive
unit. It is fixed directly to t he camera base tr ipod socket with a clamping screw, and functions with the camera as one unit. The M.18V Control Grip 1 (with enclosed Battery Holder 1) or a Re lay Cord is attached t o t he base of the uni t.
Li ke all the other members of the OM-System, the Motor Drive Group is formed around the Olympus OM-l , in itself a radical new development in 35-SLR cameras that is revolutionizing this field of photography. The superior technical capabil ities of the OM-l, and its outstanding design features such as a 35% reduction in both weight and size, plus a decrease of more than half in shutter noise, make it the perfect complement for the world's lightest and smallest motor drive system.

MPS430手册

MPS430手册

T EXAS I NSTRUMENTSMPS430系列混合信号微控制器结构及模块用户指南目录1MSP430系列1.1特性与功能1.2系统关键性能1.3MSP430系列的各型号2结构概述2.1CPU2.2代码存储器2.3数据存储器(RAM)2.4运行控制2.5外围模块2.6振荡器、倍频器和时钟发生器3系统复位、中断和运行模式3.1系统复位和初始化3.2中断系统结构3.3中断处理3.3.1SFR中的中断控制位3.3.2外部中断3.4运行模式3.5低功耗模式3.5.1 低功耗模式0与模式1,LPM0和LPM1 3.5.2 低功耗模式2与模式3,LPM2和LPM3 3.5.3 低功耗模式4,LPM43.6 低功耗应用要点4 存储器组织4.1 存储器中的数据4.2 片内ROM组织4.2.1 ROM表的处理4.2.2 计算分支跳转和子程序调用4.3 RAM与外围模块组织4.3.1 RAM4.3.2 外围模块—地址定位4.3.3 外围模块--SFR5 16位CPU5.1 CPU寄存器5.1.1 程序计数器PC5.1.2 系统堆栈指针SP5.1.3 状态寄存器SR5.1.4 常数发生寄存器CG1与CG25.2 寻址模式5.2.1 寄存器模式5.2.2 变址模式5.2.3 符号模式5.2.4 绝对模式5.2.5 间接模式5.2.6 间接增量模式5.2.7 立即模式5.2.8 指令的时钟周期与长度5.3 指令组概述5.3.1 双操作数指令5.3.2 单操作数指令5.3.3 条件跳转5.3.4 模拟指令的短格式5.3.5 其它指令5.4 指令分布6 硬件乘法器6.1 硬件乘法器的操作6.2 硬件乘法器的寄存器6.3 硬件乘法器的SFR位6.4 硬件乘法器的软件限制6.4.1 硬件乘法器软件限制--寻址模式6.4.2 硬件乘法器软件限制--中断程序7 振荡器与系统时钟发生器7.1 晶体振荡器7.2 处理机时钟发生器7.3 系统时钟运行模式7.4 系统时钟控制寄存器7.4.1 模块寄存器7.4.2 与系统时钟发生器相关的SFR位7.5 DCO典型特性8 数字I/O配置8.1 通用端口P08.1.1 P0控制寄存器8.1.2 P0原理图8.1.3 P0中断控制功能8.2 通用端口P1、P28.2.1 P1、P2控制寄存器8.2.2 P1、P2原理图8.2.3 P1、P2中断控制功能8.3 通用端口P3、P48.3.1 P3、P4控制寄存器8.3.2 P3、P4原理图8.4 LCD端口8.5 LCD端口--定时器/端口比较器9 通用定时器/端口模块9.1 定时器/端口模块操作9.1.1 定时器/端口计数器TPCNT1,8位操作9.1.2 定时器/端口计数器TPCNT2,8位操作9.1.3 定时器/端口计数器,16位操作9.2 定时器/端口寄存器9.3 定时器/端口SFR位9.4 定时器/端口在A/D中的应用9.4.1 R/D转换原理9.4.2 分辨率高于8位的转换10 定时器10.1 Basic Timer110.1.1 BasicTimer1寄存器10.1.2 SFR位10.1.3 BasicTimer1操作10.1.4 BasicTimer1操作:LCD时钟信号f LCD 10.2 8位间隔(Interval)定时器/计数器10.2.1 8位定时器/计数器的操作10.2.2 8位定时器/计数器的寄存器10.2.3 与8位定时器/计数器有关的SFR 10.2.4 8位定时器/计数器在UART中的应用10.3 看门狗定时器10.3.1 看门狗定时器寄存器10.3.2 看门狗定时器中断控制功能10.3.3 看门狗定时器操作10.4 8位PWM定时器10.4.1 操作10.4.2 PWM寄存器11 Timer_A11.1 Timer_A的操作11.1.1 定时器操作11.1.2 捕获模式11.1.3 比较器模式11.1.4 输出单元11.2 Timer_A的寄存器11.2.1 Timer_A控制寄存器TACTL11.2.2 捕获/比较控制寄存器CCTL11.2.3 Timer_A中断向量寄存器11.3 Timer_A的应用11.3.1 Timer_A增计数模式应用11.3.2 Timer_A连续模式应用11.3.3 Timer_A增/减计数模式应用11.3.4 Timer_A软件捕获应用11.3.5 Timer_A处理异步串行通信协议11.4 Timer_A的特殊情况11.4.1 CCR0用作周期寄存器11.4.2 定时器寄存器的启/停11.4.3 输出单元Unit012 USART外围接口,UART模式12.1 异步操作12.1.1 异步帧格式12.1.2 异步通信的波特率发生器12.1.3 异步通信格式12.1.4 线路空闲多处理机模式12.1.5 地址位格式12.2 中断与控制功能12.2.1 USART接收允许12.2.2 USART发送允许12.2.3 USART接收中断操作12.2.4 USART发送中断操作12.3 控制与状态寄存器12.3.1 USART控制寄存器UCTL12.3.2 发送控制寄存器UTCTL12.3.3 接收控制寄存器URCTL12.3.4 波特率选择和调制控制寄存器12.3.5 USART接收数据缓存URXBUF12.3.6 USART发送数据缓存UTXBUF12.4 UART模式,低功耗模式应用特性12.4.1 由UART帧启动接收操作12.4.2 UART模式波特率与时钟频率12.4.3 节约MSP430资源的多处理机模式12.5 波特率的计算13 USART外围接口,SPI模式13.1 USART的同步操作13.1.1 SPI模式中的主模式,MM=1、SYNC=1 13.1.2 SPI模式中的从模式,MM=0、SYNC=1 13.2 中断与控制功能13.2.1 USART接收允许13.2.2 USART发送允许13.2.3 USART接收中断操作13.2.4 USART发送中断操作13.3 控制与状态寄存器13.3.1 USART控制寄存器13.3.2 发送控制寄存器UTCTL13.3.3 接收控制寄存器URCTL13.3.4 波特率选择和调制控制寄存器13.3.5 USART接收数据缓存URXBUF 13.3.6 USART发送数据缓存UTXBUF14 液晶显示驱动14.1 LCD驱动基本原理14.2 LCD控制器/驱动器14.2.1 LCD控制器/驱动器功能14.2.2 LCD控制及模式寄存器14.2.3 LCD显示存储器14.2.4 LCD操作软件例程14.3 LCD端口功能14.4 LCD与端口模式混合应用实例15 A/D转换器15.1 概述15.2 A/D转换操作15.2.1 A/D转换15.2.2 A/D中断15.2.3 A/D量程15.2.4 A/D电流源15.2.5 A/D输入端与多路切换15.2.6 A/D接地与降噪15.2.7 A/D输入与输出引脚15.3 A/D控制寄存器16 其它模块16.1 晶体振荡器16.2 上电电路16.3 晶振缓冲输出附录A 外围模块分布附录B 指令组说明附录C EPROM编程本书用途及表述约定MSP430用户指南以方便工程师及程序员使用的方式提供软件和硬件资料,以帮助开发应用MSP430系列的产品。

MC403 Power System及相关配件说明说明书

MC403 Power System及相关配件说明说明书

USA/ CanadaNEMA 5-15P AC male plugIEC 60320 C13 AC female connector SJT 18AWG*3C, 2m/78.7in (L)EuropeCEE 7/7 AC male plugIEC 60320 C13 AC female connector H05VV-F 0.75*3C, 2m/78.7in (L)JapanJIS C 8303 AC male plugIEC 60320 C13 AC female connector VCTF 0.75*3C, 2m/78.7in (L)AustraliaSAA power cord, AS3112 AC male plug, 10A IEC 60320 C13 AC female connector2m/78.7in (L)UKNEMA 5-15P AC male plugIEC 60320 C13 AC female connector H05VV-F 0.75*3C, 2m/78.7in (L)HARDWARE CHECKLISTUnpack the contents of the box and check that the following was included:One (1) MC403 Power SystemOne (1) MC403 instruction manualOne (1) 19” rack front panelTwo (2) pedalboard mounting bracketsTwenty (20) cables:F o u r (4) 2.1 x 5.5m m b l a c k r i g h t a n g l e t o s t r a i g h t, 1’ l o n gEight (8) 2.1 x 5.5mm black right angle to straight, 2’ longFour (4) 2.1 x 5.5mm black right angle to straight 3’ longTwo (2) 2.5 x 5.5mm red right angle to straight 4’ longOne (1) 2.1 x 5.5mm to 3.5mm black straight 2’ longOne (1) 2.1 x 5.5mm to 3.5mm black straight 3’ longOne (1) AC cord with appropriate connector for region of operation:DIRECTIONS(1) Set the red AC 115/230 input selector to your local AC voltage.(2) Plug the included AC power cord into the AC IN jack.(3) Connect the AC cord into a wall outlet.(4) Flip the ON/OFF switch to the ON position. A red LED on the rear panel will lightup to indicate the unit is active.(5) Read the OUTPUT GUIDE on the following pages to make sure you are using thecorrect output jacks and cables.(6) Connect pedals to the MC403 using supplied cables. The red LED aboveeach output jack will light to indicate that power is being supplied to theconnected pedal.(7) An AC THRU jack is located next to the AC IN jack to provide auxiliary powerto another device. DO NOT EXCEED 200 WATTS on AC THRU device!OUTPUT GUIDEBefore plugging anything into the MC403 Power System, check that the powerrequirements of the device match the output capabilities of the MC403.Specifically, you should check:(1) The device’s voltage requirement to match the MC403 output voltage.(2) Whether the device uses AC or DC.(3) The current requirement to not exceed the MC403’s MAX CURRENT spec.(4) The polarity when using DC power.The cables provided with the MC403support the industry standard positive (+)barrel and negative (-) center polarity.If you are unsure about what power your device requires,DO NOT PLUG THE DEVICE INTO THE MC403! The following list provides usageexamples for each of the output types available on the MC403.ADJUSTABLE DC OUTPUTS – Use 2.1 x 5.5mm black cables.Push the red button IN for the high voltage (10.5-15V) setting.Push the red button OUT for the low voltage (6.5-10.5V) setting.Rotate the black adjustment knob to fine tune the value.To simulate a dying battery tone on a transistor based distortion/fuzz/overdrive,set the red button OUT and rotate the adj. knob until desired tone is achieved.Radial™ Tonebone™ pedals requiring 15VDC, 400mA can be used with the redbutton IN and the adjustment knob rotated fully clockwise.9VAC OUTPUTS– Use 2.5 x 5.5mm red cables.Line 6® Stomp Modeler and POD® units (excluding Pocket POD®)9VDC OUTPUTS – Use 2.1 x 5.5mm black cables.MXR®, Crybaby®, Way Huge® Electronics pedals requiring Dunlop ECB-003Dunlop® UV1SC Stereo Chorus, JD4S RotovibeBoss® pedals requiring PSA-series adaptersElectro-Harmonix® pedals requiring 9DC-100 adapterMaxon® pedals requiring AC210N adapterIbanez® pedals requiring AC109 adapterRadial™ pedals requiring 9VDC, 40mA negative center adaptersLine6® ToneCore® series pedalsDigiTech® pedals requiring PSR200R18VDC OUTPUTS – Use 2.1 x 5.5mm black cables.MXR®, Crybaby® pedals requiring Dunlop ECB-004Dunlop® UV1 UnivibeFRONT PANEL & PEDAL BOARD BRACKET ASSEMBLYRemove the four screws on front of unit as indicated in Figure A for rack mountingor as in Figure B for pedalboard mounting. Place the brackets on the unit, line upthe holes, and replace screws to secure brackets. Use M3.0x0.5, L=8mm (max)screws if factory screws are lost.Figure B – Pedalboard MountFigure A – Rack Mount92503008461R E V CWARNING: READ THIS FIRST BEFORE OPERATING!(1)(2)(3)(4)(5)(6)(7)(8) (9) (10) (11)(12)(13) (14)。

奥 местLCD电视AT3201W用户手册说明书

奥 местLCD电视AT3201W用户手册说明书

ContentsImportant safety instructions 5Taking care of your remote control 6Cleaning and servicing 6First things first 7Basic features and benefits 7Packing checklist 7Your LCD TV overview 8Front panel view 8Rear panel view 9Basic connection 11Connecting the power cord 11Connecting an antenna 11Connecting DVD/VCR/AV equipment 12Connecting a camera, camcorder or video game 12Connecting headphones 13Connecting a PC or Notebook 13Remote control overview 14Getting started 18Power On 18Setup Wizard 18Changing channels 18Adjusting the volume 18OSD Navigation 19Navigating the OSD using the remote control: 19Advanced Features 20Empowering Key: Scenario Mode and Favourite Channels 20PIP/PBP/POP 22Parental Control 22Troubleshooting 23Product specifications 24English5Important safety instructionsRead these instructions carefully. Save them for fu-ture reference.1 Follow all warnings and instructions marked onthe product.2 Unplug this product from the power outlet be-fore cleaning. Use a soft, moist cloth for clean-ing. Do not use liquid or aerosol cleaners.3 Do not use this product near water. Do not spillwater or any other liquid on the product.4 Do not place this product on an unstable cart,stand, or table. The product may fall, causing serious damage to the product.5 Slots and openings are provided for ventila-tion; to ensure reliable operation of the prod-uct and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other simi-lar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.6 This product should be operated from the typeof power source indicated on the label. If you are unsure of the type of power source avail-able, consult your dealer or local power com-pany before use.7 Do not step on or place heavy objects on thepower cord. Carefully route the power cord and any cables away from foot traffic. Do not locate this product where persons will step on the cord.8 If an extension cord is used with this product,make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.9 Never push objects of any kind into this prod-uct through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. 10 Do not attempt to service this product yourself,as opening or removing covers may expose you to dangerous voltage points or other risks. Re-fer all servicing to qualified service personnel.11 Unplug this product from the wall outlet andrefer servicing to qualified service personnel under the following conditions:a. When the power cord or plug is damaged or frayed.b. If liquid has been spilled into the product.c. If the product has been exposed to rain or water.d. If the product does not operate normally when the operating instructions are fol-lowed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.e. If the product has been dropped or the case has been damaged.f. If the product exhibits a distinct change in performance, indicating a need for service.12 Only use the correct power cord (provided inyour accessories box) for this product. Always disconnect the power cord from the wall outlet before servicing or disassembling this equip-ment.E n g l i s h6Taking care of your remote controlFollow these steps to ensure proper care of your remote control:• Handle the remote control with care. Dropping it, placing it in direct sunlight, or allowing it to getwet may cause damage.• Do not tamper with the batteries, and keep them away from children.• When you anticipate that the remote control will not be used for an extended period, remove thebatteries to prevent possible damage from battery leakage.• Dispose of batteries according to local regulations. Recycle if possible.Cleaning and servicingWhen cleaning your LCD TV, follow these steps:1 Power off the TV.2 Disconnect the power cord.3 Use a soft, moist cloth. Do not use liquid or aerosol cleaners.E n g l i s h8Your LCD TV overviewFront panel viewNo. Item DescriptionHeadphone Connects to headphones.Input Select source.When the OSD is on, press this button to confirm selection Vol Down Volume down.When the OSD is on, functions the same as the Left arrow Vol Up Volume up.When OSD is on, functions the same as the Right arrow Channel Down Channel down.When the OSD is on, functions the same as the Down arrow Channel Up Channel up.When the OSD is on, functions the same as the Up arrow Menu Turns the OSD menu ON and OFFPowerTurns the Power ON and OFFEnglishNo. Item DescriptionTuner Connects to the outdoor antenna cableAV1 / SCART 1 In Supports an external device with a SCART cable(for RGB, CVBS, S-Video,Audio left/right input)Out In TV mode, connects to your VCR In or PVR In with SCART cable to re-cord TV programsAV2 / SCART 2 In Supports external device with a SCART cable(for RGB, CVBS, S-Video,YPbPr/YCbCr, Audio left/right input)Out In TV mode, connect to your VCR In or PVR In with a SCART cable to re-cord TV programsAudio Out Connects to the audio jack input of your external device.AV3Audio-R Connects to the Audio-R output of your DVD, VCR player using the redcomposite cableAudio-L Connects to the Audio-L output of your DVD, VCR player using the whitecomposite cablePr/Cr Connects to the Component- Pr/Cr output of your DVD, VCR player usingthe red component cablePb/Cb Connects to the Component- Pb/Cb output of your DVD, VCR player us-ing the blue component cableY Connects to the Component-Y output of your DVD, VCR player using thegreen component cable9E n g l i s hDISPLAY MUTETV RECALL MENUMPXSWAP ACTIVE POSITIONSIZE/MODEINDEX SUBTITLE TELETEXT REVEALSIZE MIX SUBPAGE HOLDVOL PIP/PBP/POPCHOKENTERAV SCART PCSLEEP ZOOM WIDE SRS1234567809Teletext keysSUBPA G E H O L D Remote control overviewEnglishTeletext keysItem DescriptionINDEX Go to the index page SUBTITLE Show subtitlesTELETEXT Press to switch from TV/AV to Teletext mode. REVEAL Press to reveal hidden teletext information.SIZE Press once to zoom teletext page to 2X; press again to resume. MIX Press to overlay teletext page on the TV image, i.e. subtitles.HOLDPress to pause the current teletext page in multi-page viewing mode. Color buttons (R/G/Y/B)Operates corresponding button on the teletext page.There are five main OSD menus. These are: Picture, Audio. Use the following method to easily navigate these menus.OKUse the OSD to define your “e” Empowering Key setting: Scenario mode or Favourite channel. The default for the “e” key is the Scenario mode. Follow these steps: Menu > Empowering > e Key Setting. Choose between “Favourite channel” or “Scenario mode.” Now, when you press the “e” key, your chosen selec-Scenario ModePress the“e”Empowering key and use the Scenario mode to select pre-defined audio and video settings for optimal enjoyment of the following scenarios: Standard, Movie, Sport, Concert, Game, User; and smoothly presents moving images.Scenario Mode Design DirectionStandard mode allows you to watch your favourite channels with sharp, brilliantimagery via adaptive brightness and contrast adjustments. Clear-sounding audio isprovided by SRS performance.For comfortably enjoying movies at home, Movie mode displays dim scenes inclear detail; compensates for colour; and smoothly presents moving images. Thisis accomplished through optimal Gamma correction plus saturation, brightnessand contrast adjustments. Movie mode makes the most of high-definition movieViewing your favourite channelsOn the remote control, if you press the “e” Empowering key for less than 1 second, the favourite channel table will pop up. Your currently selected favourite channel will be highlighted. To view your other favourite channels, press the “e” Empowering key again to toggle the TV channels sequentially according to your favourite list.In TV, AV, SCART and PC mode, press PIP/PBP/POP button once to display using picture- in- picture (PIP). Press twice to display using picture- by- pic-In SCART and PC mode, press PIP/PBP/POP button three times to display picture-on-picture (POP). Then, the POP screens will display the subsequent TV channels one-by-one.PBP (Picture by Picture)PIP (Picture in Picture)EnglishTroubleshootingBefore you call the Acer service center, please check the following items:The following is a list of possible situations that may arise during the use of your LCD TV. Easy answers and solutions are provided for each one.There is no picture or sound.• Make sure the power cord is properly inserted in the power outlet.• Make sure the input mode selector is set to the correct source.• Make sure the antenna at the rear of the TV is properly connected.• Make sure the main power switch is turned on.• Make sure the volume is not set to minimum or the sound is not set to mute.• Make sure the headphones are not connected.• Reception other than those of broadcasting stations can be considered.Picture is not clear.• Make sure the antenna cable is properly connected.• Consider whether TV signals are being properly received.• Poor picture quality can occur due to a VHS camera, camcorder, or other peripheral being connectedat the same time. Switch off one of the other peripherals.• The ‘ghost’ or double image may be caused by obstruction to the antenna due to high rise buildingsor hills. Using a highly directional antenna may improve the picture quality.• The horizontal dotted lines shown on the pictures may be caused by electrical interference, e.g. hairdryer, nearby neon lights and etc. Turn off or remove these equipment.Picture is too dark, too light or tinted.• Check the color adjustment.• Check the brightness setting.• Check the sharpness function.• Fluorescent lamp may have reached the end of service life.Remote control does not work.• Check the batteries of the remote control.• Make sure the remote sensor window is not blocked or under strong fluorescent lighting.• Try to clean the remote control sensor lens on the TV with a soft cloth.• Use the buttons (hot keys) on the TV before the remote control works.If the above items do not solve your technical issue, please refer to the warranty card for service information.E n g l i s hProduct specificationsItem SpecificationPanel specifications Resolution1366 x 768 pixels Brightness (typical.) 500 nits Contrast Ratio (typical.) 800:1 Display colors16.7 M Viewing Angle (typical.) H:170 ; V:170Response Time (typical.)12 ms (gray to gray)Power supply Input100V to 240 V-AC. Max. power consumption 210 WPower Saving5 WMechanical Dimensions (W x H x D mm) 1018 x 616 x 210 mm Swivel angle 40 degrees(R20 & L20) Weight (kg) / (lbs.) 20.7kg / 45.6lbs.Wall MountingYesTerminal AV1/ SCART1 SCART(RGB,CVBS,S-Vidoe,Audio R/L )AV2/ SCART2 SCART(RGB,CVBS,S-Video,YPbPr/CbCr,Audio R/L ) AV3 RCA for YPbPr/CbCr,Audio R/L AV4 RCA for CVBS, Audio R/L AV5 S-Video, Audio R/L PC D-sub Yes DVI-D(HDCP) Yes PC audio-in Yes Audio-out YesHeadphonesYesAudio system 3D surround YesSpeakers 10 W + 10 WSRSWOW。

DVD资料

DVD资料

DVD产品培训资料一、现有产品型号1、炫影CR—DV4002、炫影CR—DV400G3、炫影CR—DV401;4、丽影CR—DV3005、丽影CR—DV3016、丽影CR—DV301G二、产品性能●双解码:杜比AC-3和DTS解码。

●完全兼容DVD、SVCD、DVCD、VCD、CD、MP3、CD-R(RW)及柯达CD、WMA(不包括高压缩盘)、JPEG格式、HDCD。

●逐行扫描Y/Pb/Pr●色差分量端子Y/Cb/Cr● 5.1声道、2声道、光纤和同轴数字音频输出。

●屏幕保护●童锁分级限制系统●平滑快放、快退(1×2×4×8×20)●慢放(1×1/2×1/4×1/6×1/8)●记忆播放、编程、搜索、预览。

●重放(碟片/章节/A-B反复)●宽电压设计(110-240V)●图像放大Q1-Q2-正常,逐帧播放●多角度、多种字幕、多种语言支持●自动切换PAL/NTSC制式●复合视频、S端子和YUV、VGA视频输出。

三、产品相关术语1.杜比AC-3:1994年,日本先锋公司宣布与美国杜比实验室合作研制成功一种崭新的环绕声制式,并命名为“杜比AC-3”(Dolby Surround Audio Coding-3)。

1997年初,杜比实验室正式将“杜比AC-3环绕声”改为“杜比数码环绕声”(Dolby Surround Digital),我们常称为Dolby Digital。

杜比AC-3提供的环绕声系统由5个全频域声道和1个超低音声道组成,被称为5.1声道。

5个声道包括左前、中央、右前、左后、右后。

低音声道主要提供一些额外的低音信息,使一些场景,如爆炸、撞击等声音效果更好。

6个声道的信息在制作和还原过程中全部数字化,信息损失很少,全频段的细节十分丰富。

现在DVD影碟录制中所采纳的数字多声道音响规格多为AC-3制式,将前置左/右、后置左/右、中置及低音共6个声道经压缩处理后,储存在DVD影碟上。

mps430手册

mps430手册

msp430芯片选型中文手册指南F1XX系列Vcc1.8V-3.6V型号MSP430F1101A参数说明1KBflash,128BRam;slopeA/D;14个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器),比较器_A;20DW、PW封装型号MSP430F1111A参数说明2KBflash,128BRam;slopeA/D;14个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器),比较器_A;20DW、PW封装型号MSP430F1121A参数说明4KBflash,256BRam;slopeA/D;14个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器),比较器_A;20DW、PW封装型号MSP430F1122参数说明4KBflash,256BRam;5通道10bitA/D;14个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器),温度传感器;20DW、PW封型号MSP430F1132参数说明8KBflash,256BRam;5通道10bitAD;14个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器);温度传感器;20DW、PW封型号MSP430F122参数说明4KBflash,256BRam;slopeA/D;22个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器);1个USART接口,比较器A;28DW、PW封装型号MSP430F123参数说明8KBflash,256BRam;slopeA/D;22个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器);1个USART接口,比较器A;28DW、PW封装型号MSP430F1222参数说明4KBflash,256BRam;8通道10bitA/D;22个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器);1个USART接口;温度传感器;28DW、PW封装型号MSP430F1232参数说明8KBflash,256BRam;8通道10bitA/D;22个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器);1个USART接口;温度传感器;28DW、PW封装型号MSP430F133参数说明8KBflash,256BRam;8通道12bitA/D;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器)_A;1个16位Timer_B(3个捕获/比较寄存器);1个USART接口;比较器_A;温度传感器;64PM封装型号MSP430F135参数说明16KBflash,512BRam;8通道12bitA/D;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器)_A;1个16位Timer_B(3个捕获/比较寄存器);1个USART接口;比较器_A;温度传感器;64PM封装型号MSP430F147参数说明32KBflash,1024BRam;8通道12bitA/D;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;MPY;比较器_A;温度传感器;64PM封装型号MSP430F1471参数说明32KBflash,1024BRam;slopeA/D;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器)_A;1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;MPY;比较器_A;64PM封装型号MSP430F148参数说明48KBflash,2048BRam;8通道12bitA/D;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器)_A;1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;MPY;比较器_A;温度传感器;64PM封装型号MSP430F1481参数说明48KBflash,2048BRam;slopeA/D;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器)_A;1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;MPY;比较器_A;64PM封装型号MSP430F149参数说明60KBflash,2048BRam;8通道12bitA/D;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器)_A;1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;MPY;比较器_A;温度传感器;64PM封装型号MSP430F1491参数说明60kflash,2048BRam;slopeA/D;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器)_A;1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;MPY;比较器_A;64PM封装型号MSP430F155参数说明16KBflash,512BRam;8通道12bitA/D;双12bitD/A;DMA;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器)_A;1个16位Timer_B(3个捕获/比较寄存器);1个USART接口;I2C;比较器_A;温度传感器;64PM封装型号MSP430F156参数说明24KBflash,512BRam;8通道12bitA/D;双12bitD/A;DMA;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器)_A;1个16位Timer_B(3个捕获/比较寄存器);1个USART接口;I2C;比较器_A;温度传感器;64PM封装型号MSP430F157参数说明32KBflash,1024BRam;8通道12bitA/D;双12bitD/A;DMA;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B(3个捕获/比较寄存器);1个USART接口;I2C;比较器_A;温度传感器;64PM封装型号MSP430F167参数说明32KBflash,1024BRam;8通道12bitA/D;双12bitD/A;DMA;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;I2C;MPY;比较器_A;温度传感器;64PM封装型号MSP430F168参数说明48KBflash,2048BRam;8通道12bitA/D;双12bitD/A;DMA;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;I2C;MPY;比较器_A;温度传感器;64PM封装型号MSP430F169参数说明60KBflash,2048BRam;8通道12bitA/D;双12bitD/A;DMA;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;I2C;MPY;比较器_A;温度传感器;64PM封装型号MSP430F1610参数说明32KBflash,5120BRam;8通道12bitA/D;双12bitD/A;DMA;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;I2C;MPY;比较器_A;温度传感器;64PM封装型号MSP430F1611参数说明48KBflash,10240BRam;8通道12bitA/D;双12bitD/A;DMA;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B (7个捕获/比较寄存器);2个USART接口;I2C;MPY;比较器_A;温度传感器;64PM封装型号MSP430F1612参数说明55kBflash,5120BRam;8通道12bitA/D;双12bitD/A;DMA;48个I/O口;16位WDT;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;I2C;MPY;比较器_A;温度传感器;64PM封装F21X1系列Vcc1.8V-3.6V型号MSP430F2101参数说明1KBflash,128BRam;slopeA/D;16个I/O口;15/16位WDT;1个16位Timer_A(3个捕获/比较寄存器);比较器_A;BrownoutProtection;20DW、PW、DGV封装型号MSP430F2111参数说明2KBflash,128BRam;slopeA/D;16个I/O口;15/16位WDT;1个16位Timer_A(3个捕获/比较寄存器);比较器_A;BrownoutProtection;20DW、PW、DGV封装型号MSP430F2121参数说明4KBflash,256BRam;slopeA/D;16个I/O口;15/16位WDT;1个16位Timer_A(3个捕获/比较寄存器);比较器_A;BrownoutProtection;20DW、PW、DGV封装型号MSP430F2131参数说明8KBflash,256BRam;slopeA/D;16个I/O口;15/16位WDT;1个16位Timer_A(3个捕获/比较寄存器);比较器_A;BrownoutProtection;20DW、PW、DGV封装F4XX系列Vcc1.8V-3.6VWithLCD驱动型号MSP430F412参数说明4KBflash,256BRam;slopeA/D;48个I/O口;96段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3个捕获/比较寄存器);比较器_A;64PM封装型号MSP430F413参数说明8KBflash,256BRam;slopeA/D;48个I/O口;96段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3个捕获/比较寄存器);比较器_A;64PM封装型号MSP430F415参数说明16kBflash,512BRam;slopeA/D;48个I/O口;96段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3或5个捕获/比较寄存器);比较器_A;64PM 封装型号MSP430F417参数说明32kBflash,1024BRam;slopeA/D;48个I/O口;96段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3或5个捕获/比较寄存器);比较器_A;64PM 封装型号MSP430FE423参数说明8KBflash,256BRam;SD16A/D;Emeter计量模块;14个I/O口;128段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3个捕获/比较寄存器);1个USART接口;温度传感器;64PM封装型号MSP430FE425参数说明16KBflash,512BRam;SD16A/D;Emeter计量模块;14个I/O口;128段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3个捕获/比较寄存器);1个USART接口;温度传感器;64PM封装型号MSP430FE427参数说明32KBflash,1KBRam;SD16A/D;Emeter计量模块;14个I/O口;128段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3个捕获/比较寄存器);1个USART接口;比较器_A;温度传感器;64PM封装型号MSP430F4250参数说明16KBflash,256BRam;32个I/O口;56段LCD;SD16位ADC (具有内部参考电压);12位DAC,1个16位Timer_A(3个捕获/比较寄存器);温度传感器模块;电源检测功能;48DL封装型号MSP430F4260参数说明24KBflash,256BRam;32个I/O口;56段LCD;SD16位ADC (具有内部参考电压);12位DAC,1个16位Timer_A(3个捕获/比较寄存器);温度传感器模块;电源检测功能;48DL封装型号MSP430F4270参数说明32KBflash,256BRam;32个I/O口;56段LCD;SD16位ADC (具有内部参考电压);12位DAC,1个16位Timer_A(3个捕获/比较寄存器);温度传感器模块;电源检测功能;48DL封装型号MSP430FG437参数说明32KBflash,1024BRam;12通道12bitA/D;双12bitD/A;48个I/O口;DMA;128段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B(3个捕获/比较寄存器);1个USART接口;温度传感器;80PN 封装型号MSP430FG438参数说明48KBflash,2048BRam;12通道12bitA/D;双12bitD/A;48个I/O口;DMA;128段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B(3个捕获/比较寄存器);1个USART接口;温度传感器;80PN 封装型号MSP430FG439参数说明60KBflash,2048BRam;12通道12bitA/D;双12bitD/A;48个I/O口;DMA;128段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B(3个捕获/比较寄存器);1个USART接口;温度传感器;80PN 封装型号MSP430FW423参数说明8KBflash,256BRam;slopeA/D;流量测量ScanIF模块;48个I/O口;96段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3或5个捕获/比较寄存器);比较器_A;64PM封装型号MSP430FW425参数说明16KBflash,512BRam;slopeA/D;流量测量ScanIF模块;48个I/O口;96段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3或5个捕获/比较寄存器);比较器_A;64PM封装型号MSP430FW427参数说明32KBflash,1024BRam;slopeA/D;流量测量ScanIF模块;48个I/O口;96段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3或5个捕获/比较寄存器);比较器_A;64PM封装型号MSP430F435参数说明16KBFlash,512BRam;8通道12bitA/D;48个I/O口;128/160段LCD;16位WDT;8bit基本定时器;16位Timer_A(3个捕获/比较寄存器)_A;16位Timer_B(3个捕获/比较寄存器)_B;1个USART接口;比较器_A;温度传感器;80PN/100PZ封装型号MSP430F436参数说明24KBFlash,1024KRam;8通道12bitA/D;48个I/O口;128/160段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3个捕获/比较寄存器)_A;1个16位Timer_B(3个捕获/比较寄存器)_B;1个USART接口;比较器_A;温度传感器;80PN/100PZ封装型号MSP430F437参数说明32KBFlash,1024KRam;8通道12bitA/D;48个I/O口;128/160段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3个捕获/比较寄存器)_A;1个16位Timer_B(3个捕获/比较寄存器)_B;1个USART接口;比较器_A;温度传感器;80PN/100PZ封装型号MSP430F447参数说明32KBFlash,1024KRam;8通道12bitA/D;48个I/O口;160段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;MPY;比较器_A;温度传感器;100PZ 封装型号MSP430F448参数说明48KBflash,2048BRam;8通道12bitA/D;48个I/O口;160段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;MPY;比较器_A;温度传感器;100PZ 封装型号MSP430F449参数说明60KBflash,2048BRam;8通道12bitA/D;48个I/O口;160段LCD;16位WDT;8bit基本定时器;1个16位Timer_A(3个捕获/比较寄存器);1个16位Timer_B(7个捕获/比较寄存器);2个USART接口;MPY;比较器_A;温度传感器;100PZ 封装型号TSS721AD参数说明M-BUS总线型号TRF6901PT参数说明无线射频率收发芯片。

英语版Blu-ray Disc DVD家庭电影院系统HB905PA(HB905PA、SB95PA

英语版Blu-ray Disc   DVD家庭电影院系统HB905PA(HB905PA、SB95PA

ENGLISHMAGYARČeštinaHRVATSKISRPSKISIOVENČINAБЪЛГАРСКИМАКЕДОНСКИPOLSKIROMÂNÃOWNER’S MANUALNetwork Blu-ray Disc TM /DVD Home Cinema System MODELHB905PA (HB905PA, SB95PA-F/S/C/W)P/NO : MFL62863592Please read this manual carefully before operatingyour set and retain it for future reference.6Contents1Safety Information3 Cautions and Warnings2Preparation8 Introduction8 About the “” SymbolDisplay8 Symbols Used in thisManual9 Supplied Accessories9 Playable Discs11 File compatibility12 Regional Code12 AVCHD (Advanced VideoCodec High Defi nition)12 Certain SystemRequirements12 Compatibility Notes13 Remote control14 Front panel15 Rear panel 3Installation 16 Assemble the speakers 17 Speaker Connection 17 Attaching the speakers to the player 18 Positioning the system 19 Connecting to Your T V 19 HDMI Connection 20 What is SIMPLINK?21 Component Video Connection 21 Video Connection 22 Resolution Setting 23 Antenna connection 23 Connections with external device 23 AUX Connection 24 PORT . IN connection 24 OPTICAL IN 1/2 connection 25 HDMI IN 1/2 connection 26 Connecting to your Home Network 26 Wired network connection 27 Wired Network Setup 29 USB device connection 31 Settings 31 Adjust the Setup Settings 31 [DISPLAY] Menu 33 [LANGUAGE] Menu 33 [AUDI O ] Menu34 [L O CK] Menu35 [NETW O RK] Menu36 [O THERS] Menu37 Sound EffectRemote control (1)Use U/u to select [DISPLAY] option thenpress i to move to the second level.Use U/u to select the [Resolution] option then press ENTER () or i to move to the third level.5. Use U/u to select the desired resolutionthen press ENTER () to confi rm yourselection.You can enjoy the sound of your component with the analogue audio output jacks from the speakers of the system.You can enjoy the sound of your portable audio player from the speakers of the system. Connect the headphones (or line out ) jack of the portable audio player into the PORT. IN of this unit. And then select the [PORTABLE] option by pressing connectionYou can enjoy the sound of your component with the digital optical connection from theYou can enjoy the pictures and sound of your component with this connection.Connect the HDMI OUT jack of yourUse U/u/I/i to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically.If you select [Test] and press ENTER ) at step 4 above, the network connection status is displayed on the screen.You can also test it on theFile loading may takes few minutes depending on the number of content stored in the USB storage device. Press ENTER () while [Cancel] is selected to stop loading.Select the other mode. And withdraw the USB device carefully.USB Connection - 2Use I/i to select the [Setup] and press ENTER (). The [Setup] menu appears. Use U/u to select a fi rst setup option, and press i to move to the second level.5. Use U/u to select a desired setting, andpress i or ENTER () to confi rm yourselection.[DISPLAY] MenuTV Aspect RatioSelect a TV aspect ratio option according to your TV type.[4:3 Letter Box]Select when a standard 4:3 TV is connected.[LANGUAGE] Menu [AUDIO] Menu[Speaker]Select a speaker that you want to adjust.[Volume]Adjust the output level of each speaker.[Distance]Adjust the distance between each speakerand the listening position.[Test/ Stop test tone]The speakers will emit a test tone.[OK]Confi rms the setting.[Cancel][LOCK] Menu The delay will vary depending on which digitalTV channel you are on. If you change channelyou may need to readjust the HD AV Sync.DRC (Dynamic Range Control)When a content encoded in Dolby Digital orDolby Digital Plus is playing back, you maywish to compress the dynamic range of theaudio output (the diff erence between theloudest sounds and the quietest ones). Thisallows you to listen to a movie at a lowervolume without losing clarity of sound. Set[DRC] to [On] for this eff ect.NOTE[NETWORK] Menu[OTHERS] MenuWhen you connect up to two devices, it appears as above.Select a fi le using U/u/I/i, and press B (PLAY) or ENTER () to play the fi le.NOTEPlayback functions described in this manual are not always available in every fi les and medium.2. Press u to highlight a marker number. UseI/i to select a marked scene that youwant to delete.2. Press I/i to skip the playback 15 secondsforward or backward. You can select apoint that you want to skip by pressing and holding I/i button.– Current title number/total number of titlesChapter – Current chapter number/total number of chaptersTime – Elapsed playing time/Total playback timeAudio – Selected audio language or channel/u/I/i to adjust the [Picture Mode] options.Select [Default] option then press ENTER ) to reset the all adjustments.Select [Movie] using I/i, and press ENTER ().Select the device using I/i, and press ENTER ().When you connect up to two devices, it appears as above.Select a fi le using U/u/I/i, and press PLAY or ENTER () to play the fi le.Press ENTER () again to deselect the subtitle fi le. Selected subtitle fi le will be displayed when you play the movie fi le.NOTEIf you press x (STOP) while playback, the subtitle selection is cancelled.This function may not work in the [Home Link] feature.Press RETURN(O) to exit the On-Screen display.Select [Photo] using I/i, and press ENTER ().Select the device using I/i, and press ENTER ().When you connect up to two devices, it appears as above.Select a fi le using U/u/I/i, and press ENTER () to view the photo.。

Philips 6100系列4K超清超薄智能LED电视说明书

Philips 6100系列4K超清超薄智能LED电视说明书

Philips 6000 series4K Ultra Slim Smart LED TV with Pixel Plus UltraHD139 cm (55") 4K Ultra HD LED TV Quad CoreDVB-T/T255PUT61024K Ultra Slim Smart LED TVwith Pixel Plus Ultra HDEnjoy functional elegance and smart connectivity. The Philips 6100 Series boasts 4K Ultra HD picture quality for superb detail. Better still, its built-in Smart TV is easy to use - making it an excellent choice for effortless entertainment.The right features presented elegantly•Ultra Slim lines for a refined profilePassionate about Picture Quality•4K Ultra HD is unlike any resolution you’ve ever seen before•Discover Ultra HD Picture Quality with Pixel Plus Ultra HD•Micro Dimming optimizes the contrast on your TVConnect to a bigger world with this Smart TV•Smart TV: a whole new world to exploreHighlightsUltra Slim profileSleek. Cutting edge. Refined. Precise. The Philips Ultra Slim silhouette. That something so slim can inspire so much interest shouldn’t be surprising, given how much sophistication it will bring to your décor.4K Ultra HDUltra HD TV has four times the resolution of a conventional Full HD TV. With over 8 million pixels and our unique Ultra Resolution Upscaling technology, you'll experience the best possible picture quality. The higher the quality of your original content, the better images and resolution you will be able to experience. Enjoy improved sharpness,increased depth perception, superior contrast, smooth natural motion, and flawless details.Pixel Plus Ultra HDExperience 4K Ultra HD sharpness with the Philips Pixel Plus Ultra HD engine. It optimizes picture quality to deliver smooth, fluid images with incredible detail and depth – Enjoy sharper 4K images with brighter whites and blacker blacks every time.Smart TVDiscover a Smarter experience that lies beyond traditional TV. Rent and stream movies, videos or games from online videostores. Watch catch-up TV from your favorite channels and enjoy a growing selection of online apps with Smart TV.Micro DimmingThanks to our special software that analyzes the picture in 6400 different zones and adjusts it accordingly, you’ll enjoy incredible contrast and image quality for a truly lifelike visualexperience.Issue date 2018-07-16 Version: 6.2.212 NC: 8670 001 44867 EAN: 87 18863 01203 1© 2018 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.SpecificationsPicture/Display•Display: 4K Ultra HD LED•Panel resolution: 3840x2160•Aspect ratio: 16:9•Brightness: 350 cd/m²•Picture enhancement: Pixel Plus Ultra HD, Micro DimmingSmart TV Features•User Interaction: MultiRoom Client, SimplyShare, Wi-Fi Miracast Certified*•Interactive TV:HbbTV•Program: Pause TV, USB Recording*•SmartTV apps*: Online Video Stores, Open Internet Browser, Social TV, TV on Demand, Youtube, Netflix TV•Ease of Installation: Auto detect Philips devices, Device connection wizard, Network installation wizard, Settings assistant wizard•Firmware upgradeable: Firmware auto upgrade wizard, Firmware upgradeable via USB, Online firmware upgrade•Screen Format Adjustments: Advance - Shift, Basic - Fill Screen, Fit to Screen, Zoom, Stretch •Philips TV Remote app*: Apps, Channels, Control, NowOnTV, TV Guide, Video On Demand Sound•Output power (RMS): 20W•Sound Enhancement: Incredible Surround, Clear Sound, Auto Volume Leveller, Smart Sound Connectivity•Number of HDMI connections: 4•Number of component in (YPbPr): 1•Number of AV connections: 1•Number of USBs: 3•Wireless connections: Wi-Fi 11n 2x2 integrated, Wi-Fi Direct•Other connections: Antenna IEC75, Digital audio out (optical), Audio L/R in, Audio in (DVI), Headphone out, Service connector, Ethernet-LAN RJ-45•HDMI features:Audio Return Channel •EasyLink (HDMI-CEC): Remote control pass-through, System audio control, System standby, Pixel Plus link (Philips)*, One touch play Multimedia Applications•Video Playback Formats: Containers: AVI, MKV,H264/MPEG-4 AVC, MPEG-1, MPEG-2, MPEG-4,WMV9/VC1, HEVC (H.265)•Subtitles Formats Support: .SMI, .SRT, .SUB, .TXT,.AAS•Music Playback Formats: AAC, MP3, WAV, WMA(v2 up to v9.2), WMA-PRO (v9 and v10)•Picture Playback Formats: JPEG, BMP, GIF, PNGSupported Display Resolution•Computer inputs on HDMI1/2: up to FHD1920x1080 @60Hz, up to 4K UHD3840x2160 @30Hz•Computer inputs on HDMI3/4: up to 4K UHD3840x2160 @60Hz•Video inputs on HDMI1/2: up to 4K UHD3840x2160 @30Hz, up to FHD1920x1080 @ 60Hz•Video inputs on HDMI3/4: up to 4K UHD3840x2160 @60HzTuner/Reception/Transmission•Digital TV: DVB-T/T2•MPEG Support: MPEG2, MPEG4•Video Playback: NTSC, PAL, SECAM•TV Program guide*: 8 day Electronic ProgramGuide•Signal strength indication•Teletext: 1000 page Hypertext•HEVC supportPower•Mains power: AC 110-240V +/-•Ambient temperature: 5 °C to 35 °C•Standby power consumption: <0.5W•Power Saving Features: Auto switch-off timer,Picture mute (for radio)Dimensions•Box dimensions(W x H x D):1343 x 828 x 168 mm•Set dimensions(W x H x D):1239.20 x 714.04 x 90.26 mm•Set dimensions with stand (W x H x D):1239.20 x 780.32 x 259.06 mm•Product weight: 15.3 kg•Product weight (+stand): 15.6 kg•Weight incl. Packaging: 21.5 kg•VESA wall mount compatible: 400 x 200 mmAccessories•Included accessories: Remote Control, Powercord, Quick start guide, Legal and safety brochure,Table top stand, 2 x AAA Batteries*EPG and actual visibility (up to 8 days) is country and operatordependent.*Energy consumption in kWh per year, based on the powerconsumption of the television operating 4 hours per day for 365days. The actual energy consumption will depend on how thetelevision is used.*The TV supports DVB reception for 'Free to air' broadcast. SpecificDVB operators may not be supported. An up to date list can befound in the FAQ section of the Philips support website. For someoperators Conditional Access and subscripction are required.Contact your operator for more information.*(Philips) only compatible with specific Philips player device.*Philips TV Remote app and related functionalities vary per TV model,operator, and country, as well as smart device model and OS. Formore details please visit: /TVRemoteapp.*Smart TV app offerings vary per TV model and country. For moredetails please visit: /smarttv.*USB recording for digital channels only, recordings may be limited bybroadcast copy protection (CI+). Country and channel restrictionsmay apply.*Compatibility depends on Wifi Miracast certification & Android 4.2or later. For more details please refer to your device documentation.。

430刷机看香港有线

430刷机看香港有线

430刷机看香港有线作者:魏金良来源:《卫星电视与宽带多媒体》2008年第08期春节前浏览卫视网站,惊喜发现430机器能刷机免卡收看138度的香港有线了。

这真是让人高兴,因为知道430N1的机器原来要看N2的节目,需要先硬件升级,要在主版上加焊一模块才行。

而现在只要升级系统软件就行了,岂非又省事又省钱,加一个模块要几十元,买张N2的D卡又是一百多元,现在全省了。

我的430收了三颗卫星,中卫60小锅主焦收146,偏焦收138,另外一150cm大锅收中星6B。

146的节目一月份遭反制以来一直没有新的写卡程序释放。

本想立刻刷机,但考虑到春节期间138会例常解密,自己又没有刷过机,怕刷坏了春节没法用机器,便决定等138加密后再刷机。

到了初六,138果然如期加密了,便决定刷机看香港有线,需要的东西如下:430机器一台、RS232线一根(一头子头,一头母头)、能上网的电脑一台就行了(需要在网上下载相应的程序)。

正好去年配电脑时在电脑城买了一根232线,为了日后升级我的430,今天可用上了。

刷机要用到两个文件,一个是升级用的程序叫Maestroflash(工具),和一个系统文件叫138N2.Maestroflash(工具)为将MFL文件传到机子、或者从机子下载文件到计算机的工具软件,这是个刷机应用程序,是个可执行文件,有多个版本,如3.03和4.18,其中3.03版在语言选择中有中文版,界面为老式430的画面:(见图1)4.18只有多种外语版本,界面为NEW630的画面(见图2、3)。

但是430刷完机后是中文菜单还是英文菜单并不取决于这个刷机程序是中文版还是英文版,而取决于138N2这个系统文件是何版本。

目前,430的刷机用系统文件有多个版本,例如:BOLT_vc.zip(V+C系统),Boit-VI-1-7 39.zip(V+I系统),Nagral-9-42.zip(Nagra南瓜系统),Viaccess.rar(单法国电信系统),allcam.rar(ALLCAM系统),430vm.rar(VM系统,用于430使用共享),香港有线D版机系统文件(BoltN2)(注:该文件仅用于BOLTN2机子),带EPG电子节目N2系统(BoltN2)(注:该文件仅用于BOLTN2机子),以上文件即是4*0内部CPU的工作文件(下载后解压即可)。

3 吋 TV OUT 免轉檔 MP5 操作说明书

3 吋 TV OUT 免轉檔 MP5 操作说明书

3吋 TV OUT免轉檔MP5 操作說明書為了您能儘快輕鬆自如地運算元碼播放器,我們隨機配備了內容詳盡的用戶手冊。

從中您可以獲取有關的產品介紹,使用方法等方面的知識。

在您開始使用您的MP4 數碼播放器之前,請仔細閱讀我們隨機提供的所有資料,以便您能正確使用產品。

功能說明:●3.0 英寸16:9 寬螢幕真彩TFT 顯示幕,400X240TFT 解析度高清晰顯示●支持MP3、WMA、FLAC、APE、AAC 音樂播放,支援PLAY FX 音效,音質表現突出●支援TF卡,容量1GB - 4GB (不支持SDHC)●支援MPEG(AVI)、RM、RMVB、DAT、VOB、400X240 解析度寬屏超清晰視頻播放●支援JPEG、BMP、GIF 格式圖片流覽,圖片自動流覽、旋轉功能●內置麥克風,超長時間錄音●節能設置,亮度可自由調節,可設置自動關機●多種音效,多種迴圈可供選擇●FM 收音機功能(可選)●支援WIN2000、WIN XP、VISTA 系統●高速USB2.0 傳輸,傳輸速度可達4MB/S●支援電子書閱讀及書簽功能●支援時鐘,遊戲功能●移動硬碟功能●支援固件升級●支援多工功能,能邊看電子書、圖片邊聽音樂注意事項:本手冊包含重要的安全措施和正確使用產品的資訊,以避免事故發生,確信在使用該產品之前仔細閱讀該手冊。

1.不要在特別熱、冷、多塵和潮濕的環境中使用播放器。

2.請避免摔落或強烈碰撞本產品,不要讓TFT 屏遭到猛烈震動,否則可能導致 TFT 屏損壞或顯示不正常,因為跌落或撞擊導致的問題只能由用戶負責。

3.電池的壽命可能會隨使用條件和使用環境的不同而有所不同。

4.在下列情況下請充電:A、電池電量圖示顯示沒電時;B、系統自動關機,再次開機後很快關機;C、操作按鍵沒有反應。

5.播放器在格式化或正在進行上傳下載時請不要突然斷開邊接,否則可能導致播放器故障。

6.對於因為產品損壞、維修或其他原因造成的抹除記憶體資料損失,本公司概不負責。

雷霆430卫星电视接收机中文说明书

雷霆430卫星电视接收机中文说明书

雷霆430卫星电视接收机中文说明书简单介绍: 此机采用目前最先进,功能最强的LSI芯片,三卡座同时支持三大系统88o/146o、76.5、138(N+V+C)用户可通过遥控器自由切换。

可通过串口方便更换机器软件,使它成为支持不同条件接收系统的机器。

系统软件:Via CC ess,Irdeto,Nagra,Seca,Conax,其中同一种软件又可支技多个系统(Viaccess+Seca+Conax)、(Viaccess+irdeto)、(Viaccess+Seca) 。

详细介绍正宗新版4系统BOLT雷霆430XP(N+V+C+M)多系统数字卫星接收机配有写入了146菲律宾梦幻系统+(换KEY自动升级无须写卡),AP6自动升级卡(76.5 V1),您可以根据自已的需要选择收收146全部节目或76.5的部分节目无需交纳收视费!该机器可由用户自己改为其他加密系统使用,只需要用RS232升级线更换软件即可,有较大的升级空间!中文说明书目前430接收机已成为普遍使用的机型,但各种牌号430机器所配的说明书内容简单,对使用者帮助不大。

机器内的中文菜单虽说非常详尽,但对于初次使用的人来说,还不是很容易掌握。

要过年了,抽空编个详细的说明书,作为给广大星友的节日礼物。

为避免有做广告之嫌,用XSAT430来表示所有牌号的430机器。

这类机器的前面版基本都一样,后背板的接口也大同小异,但接口位置有所差异。

通常背板都配有电源开关,打开后机器处于待机状态,需要再按动面板上的电源键或遥控器上的电源键来进入工作状态。

用的较多的机器系统为南瓜系统和V+I双系统这种,通过按动遥控器上的Format键来转换不同的接收系统。

机器前后共三个卡座,后面的卡座为I系统使用,前面左右两个为N系统和V系统使用。

具体前面那个卡座是N系统用的,因厂家而异,试试就知道了。

初次使用该机器要注意,在南瓜系统下只能接收146、88、75等星上的加密节目,76.5、110.5等星上的加密节目是需要在V+I系统下设置接收的。

VP300 USB PD Type-C 控制器 datasheet说明书

VP300 USB PD Type-C 控制器 datasheet说明书

DatasheetVP300USB PD Type-C Controller for SMPSAug. 30, 2016Revision 0.6 -Tel: 0755--32997776 180********Fax: 0755--32997775 Q 2966864704-Revision HistoryContentsProduct Feature ..................................................................................................................................................... - 4 - Function Block Diagram ....................................................................................................................................... - 5 - Pinout ...................................................................................................................................................................... - 6 - Pin Descriptions..................................................................................................................................................... - 7 - Application Diagram .............................................................................................................................................. - 9 - Electrical Specificationunction .......................................................................................................................... - 12 - Function Description ........................................................................................................................................... - 10 - Package Mechanical Specifications .................................................................................................................. - 13 -List of FiguresFigure 1 - Block Diagram ...................................................................................................................................... - 5 -Figure 2 - VP300 Pin Diagram (SOP16, SOP18) .................................................................................................. - 6 -Figure 3 - Application circuit ............................................................................................................................... - 9 –Figure 4 – Mechanical Specification .................................................................................................................. - 13 -Figure 5 - Mechanical Specification ................................................................................................................... - 14 -VP300USB PD Type-C Controller for SMPSGeneral DescriptionThe VP300 is an USB Power Delivery (USB PD) type-C controller with highly integrated function for Switching Mode Power Supply (SMPS).One 8051 MCU is embedded to support PD 3.0 and QC 3.0 protocol. VP300 could work under wide input range from 3.6V to 30V. The shut regulator is built in and 2 operational amplifiers are built in for CV and CC loop for high accuracy output for easy design. Programmable cable compensation is built in and CC pins could provide the Vconn power for E-Marker IC. Integrated discharge MOSFET and build in Vbus PMOS pre-drive control to save external components.Fully integrated protect function including UVP, OVP, OCP, SCP, and over temperature protection.Product Feature●Type-C and USB PD Support- Compliant to USB Type-C Cable and Connector Specification Revision 1.2- Compliant to USB Power Delivery Specification Revision 3.0- Integrated USB Type-C baseband transceiver PHY- Support USB PD all power profile- Integrate Vconn power switch●Fast 8051 Macro cell 80C32-Compatible Microcontroller- Standard 1T 8051 instruction set- Embedded OTP and SRAM●Built-in Voltage Regulators- 30V to 5V LDO- 5V to 3V LDO- 5V to 1.8V LDO●Protection functions- Over voltage protection, Under voltage protection- Over current protection- Short circuit protection- Chip internal over temperature protection●High Integration- Build-in TL431 shunt regulator for voltage output control- CC and CV control- Programmable cable compensation- Build-in discharge MOSFET- Build-in PMOS pre-drive-Support BC1.2 & QC3.0 charge function● Package- SOP 16 green package (9.9x3.9x1.4 mm) -QFN 24 green package (5x4x 0.85 mm)● Certification- TID: 1000017-Ambient operating temperature: -40℃to 85℃● Applications-USB PD Type-C Wall adapters and chargersFunction Block DiagramFigure 1 – VP300 Block DiagramMCUOTPCC/BMC SMBUS10bit ADCCurrentSensingRegistersProtectio n OVP, UVP, SCP, OTP SRAM/ROMQC3.0/BC1.2OscillatorDischargeSDA CC1 CC2VBUS_ENSCKUSB_DPVBUS_DISCMCUOTPCC/BMC SMBUSTL431 CC-CVCATH VBUS_VFB VBUS_IFBCurrent Sensing CSP CSNLDOVCC VCCA3 VCC5VRegisters ProtectionOVP , UVP ,SCP , OTPQC3.0/BC1.2 Oscillator MeasureCoreI/O ProtectionDischargePin DiagramQFN24Figure 2 – VP300 Pin DiagramVCC CATH VBUS_VFB VBUS_IFBSCK SDA USB_DP1 2 3 VBUS_EN VBUS_DISC VCC5V CSN CSP CC1 CC24 5 6 7 816 15 14 13 12 11 10 9AGND SOP16LUSB_DMPin DescriptionsSOP16LPin Name Pin I/O TYPE Description VCC 1 IO Power FLYBACK control power, connect toVBUS PMOS switchCATH 2 IO Analog Connection to PHOTO-Diode output VBUS_VFB 3 IO Analog FLYBACK compensation for CV mode VBUS_IFB 4 IO Analog FLYBACK compensation for CC mode SCK 5 IO CMOS 3V I2C IO pinSDA 6 IO CMOS 3V I2C IO pinUSB_DP 7 IO Analog USB Charge pinUSB DM 8 IO Analog USB Charge pinCC2 9 IO Analog PD2.0 Type-C pinCC1 10 IO Analog PD2.0 Type-C pinCSP 11 I Analog Pin for Current sensingCSN 12 I Analog Pin for Current sensingAGND 13 IO Ground Ground pinVCC5V 14 IO Power 5V regulated or bypass power VBUS_DISC 15 O Analog VBUS dischargeVBUS_EN 16 O Analog VBUS PMOS switch enableQFN24SCK 2 IO CMOS 3V I2C IO pinSDA 3 IO CMOS 3V I2C IO pinNC 4 No ConnectionNC 5 No ConnectionNC 6 No ConnectionNC 7 No ConnectionUSB_DP 8 IO Analog USB Charge pinUSB_DM 9 IO Analog USB Charge pinCC2 10 IO Analog PD3.0 Type-C pinCC1 11 IO Analog PD3.0 Type-C pinNC 12 No ConnectionNC 13 No ConnectionCSP 14 I Analog Pin for Current sensingCSN 15 I Analog Pin for Current sensingAGND 16 IO Ground Ground pinVCCA3 17 IO Power 3V regulated powerVCC5V 18 IO Power 5V regulated or bypass power VBUS_DISC 19 O Analog VBUS dischargeVBUS_EN 20 O Analog VBUS PMOS switch enable VCC 21 IO Power FLYBACK control power, connect toVBUS PMOS switchCATH 22 IO Analog Connection to PHOTO-Diode output VBUS_VFB 23 IO Analog FLYBACK compensation for CV mode VBUS_IFB 24 IO Analog FLYBACK compensation for CC modeApplication DiagramFigure 3 - Application circuit for VP300Electrical SpecificationFunctional operation of this device should be restricted to the conditions described. Note: About thermal factors, T a is the concerned ambient temperature, andθca= θja - θjcT J = θja * P D + T aT c = θca * P D + T aElectrical CharacteristicsItems Descriptions Testmin type maxconditionsVcc StatusOperating3.6 30Voltage6Active current After PDnegotiationSuspend current 800Central Clock 21.6 24 26.4 Internal BiasVCC5V 6V < Vcc < 30V 4.5 5 5.5 Load Regulation VCC5V=5V 50 Current Sense Amplifier15Unit Gain BW 20Current Sense Range 40 640 Regulation SectionOff-State CATH Current 500VBUS_EN SectionMaximum Sinking Current mA Pull Low Impedance 400 2K ΩFunction DescriptionPower StructureVP300 is biased by VCC, and there are a regulator output VCC5V to supply Vconn power and the analog circuit. The output capacitor is necessary to improve the stability of LDO inside also reduce the ripple noise.CV/CC RegulatorThe shunt regulator have two operational amplifiers for constant-voltage(CV) and constant-current(CC) with adjustable reference voltage are implemented. The CC loop also have programmable gain amplifier(PGA) to sense fly-back converter output current. CV and CC loop outputs are tied together in open drain structure and deal with 3.6V to 20V VBUS voltage range.VBUS_VFB and VBUS_IFB are the reference for the voltage and current feedback.Current AmplifierTo minimize the power loss of current sense resistor, the sense voltage could be adjusted from40mV~640mV, also the gain of amplifier can be adjusted among 5/10/15/20. The current signal is feedback though VBUS_IFB by 10bit ADC to report the current status to MCU.Interface of D+/D-D+ and D- pins are used for BC 1.2 and QC 3.0 communication.Interface of CC1/CC2CC1 and CC2 pins are used for USB PD 3.0 communication. 3 current profile (80µA, 180µA, 330µA) are provided to broadcast the source capability of SMPS.Open Drain Driver of VBUS_DISC / VBUS_ENVBUS_DISC is used to discharge output capacitor upon removal of connected device or to discharge the output voltage to a lower desired value after received a command. One external power resistor between VOUT and VBUS_DISC is recommended to minimum the power consumption of VP300.VBUS_EN is an open drain driver to enable/disable P-channel MOSFET of the VBUS. The PMOS is enable by pull low through VBUS_EN. VBUS_EN will pull high when the device is not connected or when abnormal conditions (OVP, UVP, OCP, SCP, OTP) happen.Package Mechanical SpecificationsSOP16L PackageFigure 4 - Mechanical Specification SOP16QFN24 packageFigure 5 - Mechanical Specification QFN24VIA Labs, Inc.7F, 529-1, Zhongzheng Rd.,Xindian District, New Taipei City 231 TaiwanTel: (886-2) 2218-1838Fax: (886-2) 2218-8924Email: ******************.twCopyright © 2015 VIA Labs, Inc. All Rights Reserved.No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written permission of VIA Labs, Inc. The material in this document is for information only and is subject to change without notice. VIA Labs, Inc. reserves the right to make changes in the product design without reservation and without notice to its users.All trademarks are the properties of their respective owners.No license is granted, implied or otherwise, under any patent or patent rights of VIA Labs, Inc. VIA Labs, Inc. makes no warranties, implied or otherwise, in regard to this document and to the products described in this document. The information provided by this document is believed to be accurate and reliable as of the publication date of this document. However, VIA Labs, Inc. assumes no responsibility for any errors in this document. Furthermore, VIA Labs, Inc. assumes no responsibility for the use or misuse of the information in this document and for any patent infringements that may arise from the use of this document. The information and product specifications within this document are subject to change at any time, without notice and without obligation to notify any person of such change.。

LG BP430 蓝光播放机 用户手册说明书

LG BP430 蓝光播放机 用户手册说明书

开始
10 开始
开始
遥控器
• • • • • • •a• • • • • • • • • • • • •d• • • • • •
1
1 (电源): 打开或关闭播放 彩色(R、G、Y、B)按钮:
器。
用来浏览 BD-ROM 菜单。 这些
B (开/关仓): 打开和关闭光 菜单也被用作特定菜单的快捷
12 cm 光碟)
音频 CD (8 cm / 12 cm 光碟)
CD-R/RW (8 cm / 12 cm 光碟)
注意

小心

符号
e
y u i
r
o y u i
r
说明 yy 诸如影片之类可购买或租借的光碟。 yy “蓝光 3D”光碟和“蓝光 3D ONLY”光碟 yy 以 BDAV 格式录制的 BD-R/RE 光碟。 yy 包含电影、音乐或图片文件的 BD-R/RE 光
2 连接
12 连接到电视机 13 – 什么是 SIMPLINK? 13 – 分辨率设置 14 连接到功放机 15 – 通过高清输出连接到功放机 15 – 通过数字音频输出连接到功放机 16 连接到家庭网络 16 – 有线网络连接 16 – 有线网络设置
3 系统设置
19 初始设置 20 设置 20 – 调整设置 20 – [网络] 菜单 21 – [显示] 菜单 23 – [语言] 菜单 23 – [音频] 菜单 25 – [锁定] 菜单 26 – [其它] 菜单
yy 根据录制软件和封盘方式,某些光碟 (CD-R/RW、DVD±R/RW 或者 BD-R/RE) 可能无法在本设备上播放。
yy 使用由个人电脑和 DVD 或 CD 刻录机刻 录的 BD-R/RE、DVD±R/RW 和 CD-R/RW 光碟时,如果碟片受损或变脏,或者播 放器光头上有脏物或湿气凝结,则可能 无法播放这些碟片。

DVD-430功能配置表(中英文)

DVD-430功能配置表(中英文)

1.1m in length;Diametre: 0.5MM CE/CB Yes NO Yes NO NO NO NO NO(Optional) R90X, 47 buttons NO / NO English(A5) 430×210×38mm
About 1.27kg About 12.50kg 3048/6216
DVD PLAYERS
Product Model(产品型号)dvd 1098B MTK ZORAN SUNPLUS Solution(解码方案) MPEG Solution(解码方案) CHEERTEK FLASH / SDRAM SONY313 SANYO HD870 Loader(机芯光头) Loader(机芯光头) WTP 三星DL6 Panel Size面板尺寸 Panel Color面板颜色 black Type of Display显示屏类型(VFD,LED,LCD,TFT) Button按键: Open & Close Button按键: STOP Button按键: Play & Pause Button按键: POWER Button按键: Previous Button按键: Next Functional Ports on the Front Panel and Display Type Location of the Power Switch电源开关位置 前面板功能接口及显示类型) (前面板功能接口及显示类型) Standby Indicator待机指示 Power on Indicator电源指示(卡门灯) Type of the disc door仓门类型 USB port/1.0, 2.0/speed (max. capacity) SD /MMC/MS Microphone Socket话筒接口 Mic Volume/Echo Knob (Adjust with Menu/Knob) Other Functions and Buttons其它功能及按键 CVBS/S-VIDEO Output YUV/Y、Pb、Pr Output SCART/VGA Output HDMI/1.0,1.2/720P,1080I,1080P TV Type电视制式 Region Code Setting区域设置 Mixed Left/Right Channel output 5.1 channels Output

M-System产品说明书.pdf_1693882044.267828

M-System产品说明书.pdf_1693882044.267828

BEFORE USE ....Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below.If you have any problems or questions with the product, please contact M-System’s Sales Office or representatives.■PACKAGE INCLUDES:Signal conditioner (body + base socket) (1)■MODEL NO.Confirm M odel No. marking on the product to be exactly what you ordered.■INSTRUCTION MANUALThis manual describes necessary points of caution when you use this product, including installation, connection and basic maintenance procedures.POINTS OF CAUTION■POWER INPUT RATING & OPERATIONAL RANGE• Locate the power input rating marked on the product and confirm its operational range as indicated below:AC power: Rating ±10%, 50/60 ±2 Hz, approx. 2VADC power: Rating ±10%, approx. 2W■GENERAL PRECAUTIONS• Before you remove the unit from its base socket or mount it, turn off the power supply and input signal for safety.■ENVIRONMENT• Indoor use.• When heavy dust or metal particles are present in the air, install the unit inside proper housing with sufficient ventilation.• Do not install the unit where it is subjected to continuous vibration. Do not subject the unit to physical impact.• Environmental temperature must be within -5 to +55°C (23 to 131°F) with relative humidity within 30 to 90% RH in order to ensure adequate life span and operation.■WIRING• Do not install cables close to noise sources (relay drive cable, high frequency line, etc.).• Do not bind these cables together with those in which noises are present. Do not install them in the same duct.■AND ....• The unit is designed to function as soon as power is sup-plied, however, a warm up for 10 minutes is required for satisfying complete performance described in the data PONENT IDENTIFICATIONINSTALLATIONDetach the yellow clamps located at the top and bottom ofShape and size of the base socketare slightly different with varioussocket types.■DIN RAIL MOUNTINGSet the base socket so that itsDIN rail adaptor is at the bot-tom. Position the upper hookat the rear side of base socketon the DIN rail and push inthe lower. When removing therail adaptor utilizing a minusscrewdriver and pull.■WALL MOUNTINGRefer to “EXTERNAL DI-MENSIONS.”TERMINAL CONNECTIONSConnect the unit as in the diagram below or refer to the connection diagram on the front of the unit. ■EXTERNAL DIMENSIONS unit: mm (inch)CLAMP• When mounting, no extra space is needed between units.■CONNECTION DIAGRAM–U(+)V(–)CHECKING1) Terminal wiring: Check that all cables are correctly con-nected according to the connection diagram.2) Power input voltage: Check voltage across the terminal 7 – 8 with a multimeter.3) Input: Check voltage across the terminal 3 – 4 with a sensitive voltmeter (With 20°C or 68°F , approx. 220mV with Pt 100, approx. 110mV with Pt 50Ω). If RTD wires are broken, the output goes over 100% (be-low 0% with downscale) due to burnout function. Check leadwires in such a case.4) Output: Check that the load resistance meets the de-scribed specifications.ADJUSTMENT PROCEDUREThis unit is calibrated at the factory to meet the ordered specifications, therefore you usually do not need any cali-bration.The output signal can be finely adjusted to match it to a re-ceiving instrument, or to compensate input wire resistance when the unit is combined with a zenor barrier. Follow the regular calibration procedure explained below:■HOW TO CALIBRATE THE OUTPUT SIGNALUse a signal source and measuring instruments of sufficient accuracy level. Turn the power supply on and warm up for more than 10 minutes.1) ZERO: Apply 0% input and adjust output to 0%.2) SPAN: Apply 100% input and adjust output to 100%.3) Check ZERO adjustment again with 0% input.4) When ZERO value is changed, repeat the above proce-dure 1) – 3).MAINTENANCERegular calibration procedure is explained below:■CALIBRATIONWarm up the unit for at least 10 minutes. Apply 0%, 25%, 50%, 75% and 100% input signal. Check that the output signal for the respective input signal remains within accu-racy described in the data sheet. When the output is out of tolerance, recalibrate the unit according to the “ADJUST-MENT PROCEDURE” explained earlier.LIGHTNING SURGE PROTECTIONM -System offers a series of lightning surge protector for protection against induced lightning surges. Please contact M-System to choose appropriate models.KR / KRS。

CAM-430使用手册V2.0.0教程

CAM-430使用手册V2.0.0教程
第五章 功能说明 ......................................................................................... 12
5.1 基本操作 ....................................................................................................... 12 5.1.1 查看视音频输入状态 ................................................................................................ 12 5.1.2 测试 3G 信号强度 ...................................................................................................... 13 5.1.3 设置服务器 IP ........................................................................................................... 14
第四章 菜单................................................................................................... 8
1
CAM-430 用户手册
4.1 开机界面 ......................................................................................................... 8
相关主题
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

元器件交易网
TOROIDAL INDUCTOR
6. ELECTRICAL CHARACTERISTICS : Inductance @ 1KHz Part No. @ Idc=0A ( µH ) 50 60 75 82 100 110 150 220 270 320 430 960 90 140 200 320 450 470 470 1800 82 100 130 220 300 390 470 500 780 1300 @ Idc=Max. ( µH ) 33 42 54 60 53 90 68 105 140 193 246 625 54 98 154 120 280 398 225 1130 52 69 96 170 120 165 400 242 428 933 IDC (A) Max. 5 4 3 3 5 2 5 4 3 2 2 1 5 3 2 5 2 1 3 1 5 4 3 2 5 4 1 3 2 1
NOTE : Specifications subject to change without notice. Please check our website for latest information.
19.06.2008
SUPERWORLD EL
NOTE : Specifications subject to change without notice. Please check our website for latest information.
19.06.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 2
TBV-500M-5.0A-8026 TBV-600M-4.0A-8026 TBV-750M-3.0A-8026 TBV-820M-3.0A-8026 TBV-101M-5.0A-8026 TBV-111M-2.0A-8026 TBV-151M-5.0A-8026 TBV-221M-4.0A-8026 TBV-271M-3.0A-8026 TBV-321M-2.0A-8026 TBV-431M-2.0A-8026 TBV-961M-1.0A-8026 TBV-900M-5.0A-9026 TBV-141M-3.0A-9026 TBV-201M-2.0A-9026 TBV-321M-5.0A-9026 TBV-451M-2.0A-9026 TBV-471M-1.0A-9026 TBV-471M-3.0A-9026 TBV-182M-1.0A-9026 TBV-820M-5.0A-9426 TBV-101M-4.0A-9426 TBV-131M-3.0A-9426 TBV-221M-2.0A-9426 TBV-301M-5.0A-9426 TBV-391M-4.0A-9426 TBV-471M-1.0A-9426 TBV-501M-3.0A-9426 TBV-781M-2.0A-9426 TBV-132M-1.0A-9426
TBV SERIES
DCR ( ) Max. 0.009 0.010 0.020 0.021 0.023 0.036 0.053 0.078 0.142 0.211 0.014 0.031 0.056 0.027 0.064 0.105
TBV-300M-10A-10626 TBV-350M-10A-10626 TBV-560M-7.0A-10626 TBV-680M-7.0A-10626 TBV-820M-7.0A-10626 TBV-101M-5.0M-10626 TBV-151M-4.0A-10626 TBV-201M-3.0A-10626 TBV-301M-2.0A-10626 TBV-851M-2.0A-10626 TBV-750M-10A-13026 TBV-131M-7.0A-13026 TBV-201M-5.0A-13026 TBV-251M-10A-13026 TBV-471M-7.0A-13026 TBV-681M-5.0A-13026
4. MATERIALS : a b d c (a) Core : Iron Powder Core (b) Wire : Enamelled Copper Wire (c) Base : FR4 (or equivalent) (d) Adhesive : Epoxy
NOTE : Specifications subject to change without notice. Please check our website for latest information.
(d) Core OD : 30 = 0.3" (e) Material code
2. CONFIGURATION & DIMENSIONS :
B A D
C
E
Unit:m/m A B C E ØW 0.40 Ref.
8.50 Max. 6.00 Max. 10.00±3.0 1.00 Max.
3. SCHEMATIC :
TBV SERIES
6. ELECTRICAL CHARACTERISTICS : Inductance @ 1KHz Part No. @ Idc=0A ( µH ) 10 12 32 8.2 22 24 68 15 43 68 140 20 30 60 68 100 220 22 29 35 58 90 110 130 470 25 32 43 65 110 130 150 230 500 @ Idc=Max ( µH ) 7.7 10.7 25 7.2 17 22 53 12.6 37 42 104 15 25 35 60 63 162 15 20 28 45 52.5 79 116 310 18 24 30 55 56 77 137 148 355 IDC (A) Max. 2 1 1 2 2 1 1 2 1 2 1 3 2 3 1 2 1 5 4 3 2 3 2 1 1 5 4 3 2 4 3 1 2 1 DCR ( ) Max. 0.017 0.040 0.065 0.017 0.030 0.055 0.095 0.023 0.074 0.056 0.140 0.021 0.035 0.038 0.101 0.081 0.190 0.014 0.020 0.026 0.061 0.044 0.069 0.146 0.286 0.016 0.021 0.030 0.055 0.042 0.055 0.159 0.108 0.300
元器件交易网
TOROIDAL INDUCTOR
6. ELECTRICAL CHARACTERISTICS : Inductance @ 1KHz Part No. @ Idc=0A ( µH ) 30 35 56 68 82 100 150 200 300 850 75 130 200 250 470 680 @ Idc=Max ( µH ) 21 25 41.5 46 53 75 110 157 250 567 43 79 134 105 190 295 IDC (A) Max. 10 10 7 7 7 5 4 3 2 2 43 79 134 105 190 295
NOTE : Specifications subject to change without notice. Please check our website for latest information.
19.06.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 4
元器件交易网
TOROIDAL INDUCTOR
1. PART NO. EXPRESSION :
TBV SERIES
TBV-100M-2A-3026
(a) (b) (c) (d) (e)
(a) Series code (b) Inductance code : 100 = 10.0uH (c) 2A : Rated Current
F
19.06.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 1
元器件交易网
TOROIDAL INDUCTOR
5. GENERAL SPECIFICATION : a) Temp. rise : 40°C Max. at Irms b) Storage temp. : -40°C to +125°C c) Operating temp. : -25°C to +105°C
TBV SERIES
DCR ( ) Max. 0.022 0.030 0.039 0.042 0.033 0.074 0.042 0.059 0.081 0.131 0.150 0.438 0.034 0.064 0.114 0.068 0.174 0.354 0.118 0.680 0.033 0.042 0.061 0.121 0.064 0.088 0.342 0.124 0.225 0.585
TBV-100M-2A-3026 TBV-120M-1A-3026 TBV-320M-1A-3026 TBV-8R2M-2A-3726 TBV-220M-2A-3726 TBV-240M-1A-3726 TBV-680M-1A-3726 TBV-150M-2A-4426 TBV-430M-1A-4426 TBV-680M-2A-4426 TBV-141M-1A-4426 TBV-200M-3A-5026 TBV-300M-2A-5026 TBV-600M-3A-5026 TBV-680M-1A-5026 TBV-101M-2A-5026 TBV-221M-1A-5026 TBV-220M-5A-6026 TBV-290M-4A-6026 TBV-350M-3A-6026 TBV-580M-2A-6026 TBV-900M-3A-6026 TBV-111M-2A-6026 TBV-131M-1.0A-6026 TBV-471M-1.0A-6026 TBV-250M-5.0A-6826 TBV-320M-4.0A-6826 TBV-430M-3.0A-6826 TBV-650M-4.0A-6826 TBV-111M-4.0A-6826 TBV-131M-3.0A-6826 TBV-151M-1.0A-6826 TBV-231M-2.0A-6826 TBV-501M-1.0A-6826
相关文档
最新文档