R6GHBHC-A01中文资料
重力传感器产品说明书
HEAVY-DUTY INDUSTRIAL SWITCHESSINgLE oR DUAL SETPoINT,PSW-700 SeriesDual external setpoint calibrationadjustment PSW-700 Series pressure switches are built for the rugged industrial setting. The internal setpoints allow adjustments while keeping the electrical component isolated from the environment. Both the internal and external setpoints have a range scale, allowing fast, easy setup.PSW-722, ±10 inH 2O range, shown much smaller than actual size.U Division 1 RatingU Single or Dual Setpoints, Tamper ResistantU Heavy-Duty Enclosure U Rated NEMA 4X, 7, 9 (IP66)U Terminal Block Wiring U High-TemperatureOperation to 200°C (392°F) Process Temperature (Stainless Steel Model Only)PSW-710, 715-7171/4 NPT1/4 NPT (F)PSW-731-7351/2 NPTPSW-702-704, 708, 709SPECIFICATIONSApprovals: UL listed; Class I, Division 1 and 2, Groups B, C and D; Class II, Groups E, F and G; Class III Repeatability: ±1% range Process Temperature:Stainless Steel: -57 to 204°C (-70 to 400°F)Brass: -40 to 149°C (-40 to 300°F) Buna-N: -23 to 93°C (-10 to 200°F)Ambient Temperature:-50 to 71°C (-58 to 160°F), except for models 703 to 705, which are -18 to 71°C (0 to 160°F). Setpoint typically shifts less than 1% of range for a 28°C (50°F) ambient temperature change.Shock: Setpoint repeats after 15 g, 10 ms durationVibration: Setpoint repeats after 2.5 g at 5 to 500 HzOutput: 1 SPDT or 2 SPDT 15 A 125/250/480 VacEnclosure: Low copper-cast epoxy-coated aluminumElectrical Connection: 3⁄4 NPT conduit; internal screw terminals Dimensions:psi Ranges:230 (max) H x 125 W x 108 mm D (9 x 4.9 x 4.3") H 2O Ranges:W and D = 153 mm (6") Weight: Approx. 1.7 kg (4 lb)PSW-721-72INDUSTRIAL SWITCHES PSW-707, 0 to 500 psirange, shown smallerthan actual size。
Arctis Nova 1 产品信息指南说明书
ARCTIS NOVA 1 PRODUCT INFORMATION GUIDETABLE OF CONTENTSGeneral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Perfect Fit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8GENERALPACKAGE CONTENTSArctis Nova 1 HeadsetMain Headset CableDual 3 .5 mm Extension CableSYSTEM COMPATIBILITYPCXboxPlayStation 5PlayStation 4Nintendo SwitchSOFTWAREUse Engine inside SteelSeries GG to set customequalizer settings and control your mic .GG also has other amazing apps like Sonar, a breakthroughin gaming sound, that allows you to hear what mattersmost, through cutting-edge audio tools .DOWNLOAD NOWsteelseri.es/gg34PRODUCT OVERVIEWHEADSET1Elastic Headband 2Airweave Ear Cushions*3Retractable ClearCast Microphone 4Volume Wheel 5Microphone Mute Button 6 3 .5 mm Audio JackACCESSORIES*7Main Audio Cable 8 Dual 3 .5 mm Extension Cable*Find accessories and replacement parts at steelseries .com/gaming-accessoriesSETUPSINGLE 3.5 MM CONNECTIONSDUAL 3.5 MM CONNECTIONS56MICROPHONERETRACTABLE MICROPHONEOut of the box, the Retractable ClearCast Microphone (3) is retracted . To use the microphone, slide it away from the headset until it reaches full extension .POSITIONINGPosition the Retractable ClearCast Microphone (3) close to the corner of your mouth with the front surface facing you . Note:The microphone should not be used when retracted .PERFECT FITThere are two ways to adjust the fit of your headset1 Slide the Earcups up or down to change the overall height .2 Change the position of the Elastic Headband (1) on one or bothsides to achieve the desired tension and flex .7REGULATORYEurope – EU Declaration of ConformityHereby, SteelSeries ApS. declares that the equipment which is compliance with directive RoHS2.0 (2015/863/EU), EMC Directive (2014/30/EU), and LVD (2014/35/EU) which are issuedby the Commission of the European Community.The full text of the EU declaration of conformity is available at the following internet address: https:///SteelSeries ApS. hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals - (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.UK Declaration of ConformityHereby, SteelSeries ApS. declares that the following equipment which is compliance with Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety) Regulations 2016, Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 issued by the Department for Business, Energy& Industrial Strategy.The full text of the UK declaration of conformity is available at the following internet address: WEEEThis product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.Federal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:This device may not cause harmful interference, andthis device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 8protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one ofthe following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.Consult the dealer or an experienced radio/TV technician for help.FCC Caution:Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This transmitter must not be co-located or operating in conjunction with any other antennaor transmitter.Industry Canada StatementThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subjectto the following two conditions:this device may not cause interference, andthis device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canadaapplicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:l’appareil ne doit pas produire de brouillage, etl’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillageest susceptible d’en compromettre le fonctionnement.This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.该电子电气产品含有某些有害物质，在环保使用期限内可以放心使用，超过环保使用期限之后则应该进入回收循环系统。
安布雷拉传感器产品技术参数说明说明书
新产品技术参数说明V2021.11.24杭州安布雷拉自动化科技有限公司曾工186****3652目录超声波接近开关(DA-AAF-35RJG) (1)超声波接近开关(DA-AAM38-35R0N) (2)M33水下测距传感器(DE-WLM33-35R0N) (3)HART二线超声波物位计(DYYL-WW-HART) (4)M60水下六路避障传感器(DF-WAM60-20R0N) (5)M100水下六路避障传感器(DG-WAM100-300R0N) (6)水下噪声检测传感器(DI-WA43-BON) (7)TI小型测距传感器(DA-AAGH-40RMG) (8)手持式超声波测深仪(DD-WAP-70MLG) (9)超声波水下通讯传感器(DJ-WAM33-300MRON) (10)六波束超声波传感器(DK-AAM38-50R0N) (11)M30超声波测距传感器(DC-AS30-40RMG) (12)外贴式超声波液位开关(DL-WA-50JOG) (13)超声波五路水下避障传感器(DK-WNB-50R0G) (13)双路超声波传感器(DO-ALN1-15RNG) (15)小型超声波多普勒流速仪(DP-WPB-FR0G) (16)低功耗窨井液位计(DQ-WAB-10NB) (17)六波束超声传感器(DK-WNM70-50R0N) (18)M36水下测距传感器(DE-WNQ-M36-00-RON) (19)科鼎物位计(DC-ALM30M2500MM-RON) (20)M50水下测距传感器(DM-WAM50-R0N) (21)M80水下测距传感器(DM-WAM80-R0N) (22)M33贴片水下测距传感器(DE-WLM33-35R0N) (23)M36水下测距传感器航插款(DE-WNQ-M36-00-RON) (24)十波束超声波测距避障传感器 (25)超声波五路水下避障传感器(DK-WNB-50R0G) (26)超声波接近开关(DA-AAF-35RJG)连接器出线方式。
亚安产品手册
2）支持视频无损再生中继，因此可以采用多级传输模式；
3）受环境干扰较小，传输质量高；
4）支持的信号容量可达16路，甚至更多（32路、64路、128路）。
编辑本段光端机从模拟走向数字
从上个世纪80年代末模拟光端机开始进入中国应用，到2001年开始数字光端机的出现；演绎了经济发展带动科学技术进步，科学技术推动经济发展的过程。光端机的特性：传输来自统原理园区视频监控方案
展开
光端机简介
概念
工作原理
光端机的常用术语
光端机分类
PDH光端机
SDH光端机
SPDH光端机
通常所说的光端机
概述
1、模拟光端机
2、数字光端机
光端机从模拟走向数字
光端机的传输距离
光端机接口类型
光端机品牌
常见故障及解决方法
一、没有视频信号
二、画面出现干扰雪花
常见故障解决之道
光端机
光端机从接口分类又为视频光端机，音频光端机，数据光端机，以太网光端机，开关量光端机，电话光端机。
监控术语的话，那就是视频光端机，传输视频为主及其他数据，音频，开关量，以太网电话等信号的光电转换传输设备，他的本质是：光电转换传输设备；放在光缆的两端，一收一发，顾名思义光端机；所以广义上讲，基于光纤网络用于传输信号的光电转换设备都可以称为光端机.
信噪比（SNR:Signal To Noise Ratio ）是指光端机音源产生最大不失真声音信号强度与同时发出的噪音强度之间的比率，通常以S/N表示，一般用分贝（dB）为单位。信噪比越高表示音频质量越好，一般音频光端机的信噪比应该在60dB以上。
误码率
误码率（BER：Bit Error Ratio）是衡量数据在规定时间内数据传输精确性的指标。误码率=传输中的误码/所传输的总码数*100%。如果有误码就有误码率。
派克核电门户网站产品说明书
10 CFR 50 • AERB • ASME QME-1* • ASME QSC (NCA-3800) • ASME 第 III 部分 • ASME U核级认证核级认证 • ASN • CNSC CRN-N* HAF 604 • IAEA SC-QA 780 298* • IEEE* • ISO 9001: •E 派克核电门户网站无论您是要建新的发电厂，还是要改进现有电厂，派克都会依照行业统一的质量保证计划，使不同部门的各种产品进入核电市场，提高生产率和利润率。
这些产品包括安全专项和安全相关的核级子系统和组件，以及为非管制工厂区提供的优质的“成熟”商品。
派克门户网站是我们投入数百万美元用于核能研究和发展的承诺之一，是我们承诺提获得越来越多在全球供应且通过认证的核能产品的单一途径。
供行业所要求的高效性、可靠性和成本效益的体现。
我们支持单源购买各种产品系列，通过最新的订购方式提高工厂生产率和利润率。
另外，我们在将近 50 个国家拥有 50,000 名员工，因而门户网站产品在全球都有供应。
有关订购门户网站产品的更多信息，请：拨打电话 256 885 3833（销售）、256 885 3880（技术支持）或 发送电子邮件至 ipdusnuclear@parker .com派克核电门户网站是根据派克现行的 NQA- 1 和 10CFR50 附录 B 规定的质量保证计划开发的，并且采用了行业及规范性文件中规定的最佳实3 级阀门的 ASME N 核级认证外，派克核电门户网站上提供的产品符合 10CFR 第 21 部分中对基本组件的规定，按照认可的质保计划或是商品级物项执行。
专项不会提高质量，而是验证并记录专用项目中已有的的质量。
EU PED*HAF 604*IAEA SC-QA KTA 3507NNSANQA-1Parker Hannifin Ltd.Tachbrook Park DriveTachbrook Park,Warwick, CV34 6TU英国电话：+44 (0) 1926 317 878传真：+44 (0) 1926 317 855********************欧洲、中东和非洲AE – 阿联酋，迪拜电话：+971 4 8127100********************AT – 奥地利，维也纳新城电话：+43 (0)2622 23501-0*************************AT – 东欧，维也纳新城电话：+43 (0)2622 23501 900****************************AZ – 阿塞拜疆，巴库电话：+994 50 2233 458****************************BE/LU – 比利时，尼韦尔电话：+32 (0)67 280 900*************************BY – 白俄罗斯，明斯克电话：+375 17 209 9399*************************CH – 瑞士，埃托瓦电话：+41 (0)21 821 87 00*****************************CZ – 捷克共和国，Klecany电话：+420 284 083 111*******************************DE – 德国，卡尔斯特电话：+49 (0)2131 4016 0*************************DK – 丹麦，巴勒鲁普电话：+45 43 56 04 00*************************ES – 西班牙，马德里电话：+34 902 330 001***********************FI – 芬兰，万塔河电话：+358 (0)20 753 2500parker. ****************FR – 法国，Contamine s/Arve电话：+33 (0)4 50 25 80 25************************GR – 希腊，雅典电话：+30 210 933 6450************************HU – 匈牙利，布达佩斯电话：+36 23 885 470*************************IE – 爱尔兰，都柏林电话：+353 (0)1 466 6370*************************IT – 意大利，Corsico (MI)电话：+39 02 45 19 21***********************KZ – 哈萨克斯坦，阿拉木图电话：+7 7273 561 000****************************NL – 荷兰，奥尔登扎尔电话：+31 (0)541 585 000********************NO – 挪威，阿斯克尔电话：+47 66 75 34 00************************PL – 波兰，华沙电话：+48 (0)22 573 24 00************************PT – 葡萄牙，莱萨·达·帕尔梅拉电话：351 22 999 7360**************************RO – 罗马尼亚，布加勒斯特电话：+40 21 252 1382*************************RU – 俄罗斯，莫斯科电话：+7 495 645-2156************************SE – 瑞典，Spånga电话：+46 (0)8 59 79 50 00************************SK – 斯洛伐克，班斯卡·比斯特里察电话：+421 484 162 252**************************SL – 斯洛文尼亚，新梅斯托电话：+386 7 337 6650**************************TR – 土耳其，伊斯坦布尔电话：+90 216 4997081************************UA – 乌克兰，基辅电话：+380 44 494 2731*************************UK – 英国，沃里克电话：+44 (0)1926 317 878********************ZA – 南非，坎普顿公园电话：+27 (0)11 961 0700*****************************北美地区CA – 加拿大，安大略省米尔顿电话：+1 905 693 3000US – 美国，克利夫兰电话：+1 216 896 3000亚太地区AU – 澳大利亚，城堡山电话：+61 (0)2-9634 7777CN – 中国，上海电话：+86 21 2899 5000HK – 香港电话：+852 2428 8008IN – 印度，孟买电话：+91 22 6513 7081-85JP – 日本，东京电话：+81 (0)3 6408 3901KR – 韩国，首尔电话：+82 2 559 0400MY – 马来西亚，莎阿南电话：+60 3 7849 0800NZ – 新西兰，惠灵顿电话：+64 9 574 1744SG – 新加坡电话：+65 6887 6300TH – 泰国，曼谷电话：+662 186 7000-99TW – 台湾，台北电话：+886 2 2298 8987南美AR – 阿根廷，布宜诺斯艾利斯电话：+54 3327 44 4129BR – 巴西，圣若泽杜斯坎普电话：+55 800 727 5374CL – 智利，圣地亚哥电话：+56 2 623 1216MX – 墨西哥，阿波达卡电话：+52 81 8156 6000核电门户网站手册 M&K 12/10 1M派克授权的本地经销商© 2010 派克汉尼汾公司派克全球办事处联系信息欧洲产品信息中心免费电话：00 800 27 27 5374(AT, BE, CH, CZ, DE, DK, EE, ES, FI, FR, IE,IL, IS, IT, LU, MT, NL, NO, PL, PT, RU, SE,SK, UK, ZA)– 一点的方式。
HAL506UA-A中文资料
HAL5xx DATA SHEETContentsPage Section Title3 1.Introduction3 1.1.Features3 1.2.Family Overview4 1.3.Marking Code4 1.3.1.Special Marking of Prototype Parts4 1.4.Operating Junction Temperature Range4 1.5.Hall Sensor Package Codes4 1.6.Solderability5 2.Functional Description6 3.Specifications6 3.1.Outline Dimensions11 3.2.Dimensions of Sensitive Area11 3.3.Positions of Sensitive Areas11 3.4.Absolute Maximum Ratings11 3.4.1.Storage and Shelf Life12 3.5.Recommended Operating Conditions13 3.6.Characteristics14 3.7.Magnetic Characteristics Overview20 4.Type Descriptions20 4.1.HAL50122 4.2.HAL50224 4.3.HAL50326 4.4.HAL50428 4.5.HAL50530 4.6.HAL50632 4.7.HAL50834 4.8.HAL50936 4.9.HAL51638 4.10.HAL51740 4.11.HAL51842 4.12.HAL51944 4.13.HAL52346 5.Application Notes46 5.1.Ambient Temperature46 5.2.Extended Operating Conditions46 5.3.Start-up Behavior46 5.4.EMC48 6.Data Sheet Historyintentionally left vacant6. Data Sheet History1.Final data sheet: “HAL501...506, 508, 509, 516...518, Hall Effect Sensor Family, Aug. 11, 1999,6251-485-1DS. First release of the final data sheet.Major changes to the previous edition “HAL501 ...HAL506, HAL 508”, Hall Effect Sensor ICs, May 5, 1997, 6251-405-1DS:–additional types: HAL509, HAL516 ... HAL518–additional package SOT-89B–additional temperature range “K”–outline dimensions for SOT-89A and TO-92UA changed–absolute maximum ratings changed–electrical characteristics changed–magnetic characteristics for HAL 501, HAL 503, HAL 506, and HAL 509 changed2.Final data sheet: “HAL501...506, 508, 509, 516...519, 523, Hall Effect Sensor Family”, Feb. 14, 2001, 6251-485-2DS. Second release of the final data sheet. Major changes:–additional types: HAL519, HAL523–phased-out package SOT-89A removed–temperature range “C” removed–outline dimensions for SOT-89B: reduced toler-ances 3.Final data sheet: “HAL501...506, 508, 509, 516...519, 523, Hall Effect Sensor Family”, Oct. 7, 2002, 6251-485-3DS. Third release of the final data sheet.Major changes:–temperature range “E” removed–outline dimensions for TO-92UA: package diagram updated–absolute maximum ratings changed–section 3.4.1. added–electrical characteristics changed–magnetic characteristics changed4.Final data sheet: “HAL501...506, 508, 509, 516...519, 523, Hall Effect Sensor Family”, Nov. 27, 2003, 6251-485-4DS. Fourth release of the final data sheet.Major changes:–new package diagrams for SOT89-1 and TO92UA-1–package diagram for TO92UA-2 added– ammopack diagrams for TO92UA-1/-2 addedMicronas GmbHHans-Bunte-Strasse 19D-79108 Freiburg (Germany)P.O. Box 840D-79008 Freiburg (Germany) Tel. +49-761-517-0Fax +49-761-517-2174E-mail: docservice@ Internet: Printed in GermanyOrder No. 6251-485-4DS All information and data contained in this data sheet are without any commitment, are not to be considered as an offer for conclusion of a contract, nor shall they be construed as to create any liability. Any new issue of this data sheet invalidates previous issues. Product availability and delivery are exclusively subject to our respective order confirma-tion form; the same applies to orders based on development samples delivered. By this publication, Micronas GmbH does not assume re-sponsibility for patent infringements or other rights of third parties which may result from its use.Further, Micronas GmbH reserves the right to revise this publication and to make changes to its content, at any time, without obligation to notify any person or entity of such revisions or changes.No part of this publication may be reproduced, photocopied, stored on a retrieval system, or transmitted without the express written consent of Micronas GmbH.。
波士顿家用电器产品说明书
© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.
07/18
30" Built-In Microwave Oven
500 Series – Black HMB50162UC
Installation Details
Under-counter Installation
Flush Installation
Flush Installation Over Single Oven
Accessories: To purchase Bosch accessories, cleaners & parts please visit /us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).
60 Hz
Power cord length (in) 43"
Plug type
NEMA 5-15 – 3 prong plug
Dimensions & Weight
Overall appliance dimensions (HxWxD) (in)
Required cutout size – Standard (HxWxD) (in)
Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.
艾奎霍夫低压电力电路保护器产品说明说明书
Eaton MPN64N3MEAXX2CEaton Magnum low voltage power circuit breaker, Magnum PXR,Double narrow frame, 4000 A (AABBCC), 65 kA, Three-pole,Drawout vertical with motorized racking mounting, PXR20 LSIG tripunitGeneral specificationsEaton Magnum low voltage power circuitbreakerMPN64N3MEAXX2C78668960042616.3 in16.8 in24.9 in177 lbCCC MarkedCE Marked NEMA Compliant SABA Listed Lloyd's Register Certified KEMA CertifiedANSIUL ListedCSA CertifiedABS CertifiedDNV GL CertifiedProduct Name Catalog NumberUPCProduct Length/Depth Product Height Product Width Product Weight Compliances CertificationsDouble narrow Three-pole Magnum PXRDouble narrow Magnum PXR20 LSIGThree-pole4000 A65 kAIC65 kAIC4000 AZone selective interlocking application paper Magnum circuit breakers with Power Xpert Release trip units product aid Selevctive coordination application paper - IA0120000E3Magnum PXR and PD-SB standard and narrow frame UL Certificate of ComplianceMagnum PXR and PD-SB double and double narrow frame UL Certificate of ComplianceMicrosoft Word - Power Xpert Protection Manager Quick Start Guide.docxMagnum PXR low voltage power circuit breakers user manualFrame Number of poles TypeFrame Series Trip Type Number of poles Rated uninterrupted current (Iu)Interrupt rating Interrupt rating Rated uninterrupted current (Iu)Application notesBrochuresCatalogsCertification reportsManuals and user guidesEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaPower Xpert Release trip unit for Magnum PXR circuit breakers PXR 20/25 user manualPower Xpert Protection Manager x64 22.6 1 Power Xpert Protection Manager x32 22.06 1 Eaton Specification Sheet - MPN64N3MEAXX2C Low voltage circuit breakers guide spec Magnum PXR 20/25 electronic trip units time current curves Safer by design: arc energy reduction techniques Cyber security white paperMolded case and low-voltage power circuit breaker healthSoftware, firmware, and applications Specifications and datasheetsTime/current curvesWhite papers。
19-337-R6GHBHC-A01中文资料
Rev. 2
Page: 6 of 12
Prepared by :Jessica Chang
元器件交易网
EVERLIGHT ELECTRONICS CO.,LTD.
19-337/R6GHBHC-A01/2T
Typical Electro-Optical Characteristics Curves
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10%
No.
Items
Test
元器件交易网
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
0.35mm Height Chip LED with Full Color
19-337/R6GHBHC-A01/2T
Features
․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow
元器件交易网
EVERLIGHT ELECTRONICS CO.,LTD.
19-337/R6GHBHC-A01/2T
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
纽泰克产品介绍
纽泰克产品介绍1、公司产品范围：6~35kV环氧树脂浇注式户内单相电流、电压互感器。
2、10kV系列电流互感器：1）AS12/150b/2S、4S：适用于中置柜，柜宽650mm。
A代表电流互感器：150b代表产品宽度（149mm）：2S、4S表示此种产品的两种长度，2S对应275mm，4S对应395mm。
S表示带绝缘墙。
额定一次电流：20~1250A。
2）AS12/185h/2、4：适用于中置柜，柜宽800mm。
A代表电流互感器：185h代表产品宽度（184mm）：2、4表示两种产品长度，2对应275mm，4对应395mm。
额定一次电流：15~3150A。
3）AD12/200e/3：穿墙式安装，适用于额定一次电流：300~2500A。
4）LMZB1-10：大电流穿心式CT，适用于额定一次电流：2500~5000A，二次绕组最多为四个（额定一次电流较大时）。
3、20kV电流互感器只有一种：AS24/185b/3适用于额定一次电流：15~3150A。
4、35kV电流互感器：1）AN36/250f/2：引进原型号爬电距离较小，很少用。
2）AW36/250f/2：AN36/250f/2的改进型，加大了爬距，一般35kVCT全选此种型号。
适用于额定一次电流：15~3150A，二次绕组最多为四个（额定一次电流较大时）。
5、10kV电压互感器1）相对地连接型的有：REL10、UNE10、URED10。
REL10体积小，二次输出负荷也小，适合小柜型。
UNE10体积大，二次输出负荷也大，还可满足双测量绕组（即二次可以有三个绕组输出）。
适合大柜型。
URED10的体积和参数介于REL10与UNE10之间，带熔断器套管，可用于手车式安装。
相对地连接PT在系统中用星形连接方式：（三相系统用三台PT）。
2）相对相连接型的有：RZL10、UNZ10、URZD10。
RZL10：体积小、输出小、适合小柜型。
UNZ10：体积大、输出大、适合大柜型。
艾瓦特芯片规格书
艾瓦特芯片规格书如下：一、产品概述艾瓦特芯片是专为高性能计算和人工智能应用设计的高端芯片。
它采用最先进的7纳米工艺制造，具有高性能、低功耗和低热量排放的特点。
艾瓦特芯片支持并行计算，可以高效处理大规模数据和算法，是提高计算性能的关键组件。
二、技术规格1. 工艺技术：7纳米工艺制造2. 核心数量：双核心3. 内存带宽：高达51.2GB/s4. 计算能力：强大的计算能力，适用于高性能计算和人工智能应用5. 能耗：低功耗设计，适合节能环保6. 热量排放：先进的散热技术，确保芯片在高负荷运行时稳定可靠7. 工作温度：工作温度范围宽广，适应各种环境和使用场景三、性能特点1. 高性能：艾瓦特芯片采用并行计算架构，可高效处理大规模数据和算法，提高计算性能。
2. 高效能比：在相同的计算任务下，艾瓦特芯片的性能比传统处理器高得多。
3. 节能环保：低功耗设计和先进的散热技术，确保芯片在长时间运行和高温环境下稳定可靠。
4. 兼容性：艾瓦特芯片兼容现有的软件和硬件系统，方便用户使用。
四、应用领域艾瓦特芯片适用于各种高性能计算和人工智能应用，如大数据分析、云计算、机器学习和深度学习等。
它能够为各种应用提供强大的计算能力，提高工作效率和性能比。
五、生产与品质艾瓦特芯片采用最先进的生产工艺，确保产品的高品质和高稳定性。
我们的质量控制流程严格遵循行业标准，从原料到成品进行全面检测，确保产品的性能和质量达到最高水平。
六、服务与支持我们提供全面的售后服务和技术支持，包括产品咨询、故障排除、解决方案提供等。
我们承诺在第一时间解决客户的问题，确保客户的利益和满意度。
以上就是艾瓦特芯片的规格书，我们致力于为客户提供高性能、稳定可靠的产品，帮助客户实现更高的计算性能和效率。
HM61-20101中文资料
Outline Dimensions (mm)
Figure 1 Recommended Soldeto Specifications table for ‘Ht’ dimension of each model.
Figure 2
Recommended Solder Pad Layout
Packaging
Standard: Embossed Tape & Reel Reel: Diameter: Capacity: Figure 1 Figure 2 Figure 1 Figure 2 = = = = 7” (177.8mm) 13” (330.2mm) 300 Units 750 Units
Ht Height mm Max.
4.7 4.7 4.7 4.7 4.7 4.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7
24
MAGNETIC COMPONENTS SELECTOR GUIDE 2006 EDITION
We reserve the right to change specifications without prior notice.
元器件交易网
Notes:
Inductance, Lo @1kHz, 0.1V µH ±10%
10 22 47 100 220 470 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700
曾刘-31组-芯片手册
10M
5
LTC1566-1CS8
1
2.3M
6
LTC1068-200IG
2
时钟可调，四路二阶
7
LTC1562CG-2
1
标号
型号
库存
使用
特点
1
MAX267/263
1
引脚可编程的通用及带通滤波器
2
MAX262
1
可由微处理器编程
3
MAX275
四阶及八阶、连续时间方式有源滤波器
4
MAX297
1
八阶、低通、椭圆函数、开关电容滤波器
3
4
四、DA
1.串行
标号
型号
库存
使用
特点
1
DAC7611
1
12位
2
3
4
2.并行
标号
型号
库存
使用
特点
1
DAC904
1
14位
2
DAC900
1
10位
3
4
五、滤波器芯片
标号
型号
库存
使用
特点
1
LTC6605
4
10M低通滤波
2
LTC1560-1CS8
1
1M
3
LT6600CS8-2.5
1
2.5M
4
LT6600CS8-10
1
双路4A峰值高速低侧功率MOSFET驱动器
2
UC3843AN
5
开关电源控制器（直流到直流调节器，控制器脉冲宽度调制器，控制）
3
4
七、DDS芯片
标号
型号
库存
使用
5601中文资料
The System Sensor 5600Series mechanical heat detectors offer a low cost means for property protection against fire,and for non-life safety installations where smoke detectors are inappropriate.The 5600Series offers both single and dual circuit models,each available with low or high temperature ratings,and fixed temperature or rate of rise activation.The rate of rise el-ement is restorable to accommodate field testing of the unit.The detectors mount readily on single gang or octagonal back boxes.They can also mount on a four inch square box with aid of a square to round plaster ring.The mounting bracket is reversible to allow for flush and surface mount in-stallations.The 5600units provide clear markings readily visible on the unit to ensure the proper application.Alphanumeric char-acters identify the type of detector and temperature rating,both in Fahrenheit and Celsius.Fixed temperature models are identified “FX”while combination units are marked “FX/ROR”.The detector also features positive indication of actuation of the fixed temperature portion.The collector disc drops from the unit making it readily identifiable.Electrical SpecificationsOperating Voltage Contact Ratings 6-125V AC 3A 6-28VDC 1A 125VDC0.3ASpecifications are provided for information only,are not intended to be used for installation purposes,and are believed to be accurate.However,no responsibility is assumed by Gamewell-FCI for their use.Specifications subject to change without notice.©2006All Rights ReservedGAMEWELL-FCI12Clintonville Road,Northford,CT 06472-Tel:(203)484-7161-Fax:(203)484-71189020-0590Rev.BSYSTEM SENSOR 5600SERIESMECHANICAL HEATDETECTORSFEATURES•Attractive Low Silhouette design •Multiple Configurations Available •Single and Dual Circuit Models•Fixed Temperature and Combination Fixed Temperature/Rate-Of-Rise •Readily Visible Alphanumeric Markings•Standard 3.5or 4-inch Octagonal Mounting•Single Gang or Standard 4”Square Mounting with Plaster RingAn ISO 9001CertifiedCompanyRATINGS AND ORDERING INFORMATIONModel Circuit Temp.Rating TypeMax.UL Spacing -10Foot Ceiling*5601Single 135o F (57o C)FT +ROR 50ft.x 50ft.(15.24m x 15.2m)5602Single 194o F (90o C)FT +ROR 50ft.x 50ft.(15.24m x 15.2m)5603Single 135o F (57o C)FT only 25ft.x 25ft.(7.62m x 7.62m)5604Single 194o F (90o C)FT only 25ft.x 25ft.(7.62m x 7.62m)5621Dual 135o F (57o C)FT +ROR 50ft.x 50ft.(15.24m x 15.2m)5622Dual 194o F (90o C)FT +ROR 50ft.x 50ft.(15.24m x 15.2m)5623Dual 135o F (57o C)FT only 25ft.x 25ft.(7.62m x 7.62m)5624Dual 194o F (90o C)FT only25ft.x 25ft.(7.62m x 7.62m)*Refer to NFPA 72for guidelines for spacing reductions when ceiling heights exceed 10feet.3016008199-33-E 7270-1209:227S2101元器件交易网。
Parker Hannifin Canada电子控制设备分部硬件用户手册说明书
PHK User Manual Hardware ManualEffective: November 2021units=mm4X R7.3107.5OFFER OF SALEThe items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance aregoverned by the provisions stated in the detailed “Offer of Sale” elsewhere in this document or available at .Parker Hannifin Corporation Electronic Motion and Controls Division 850 Arthur Ave Elk Grove Village, IL 60007phone 800 221 /emcCopyright 2022 © Parker Hannifin Corporation. All rights reserved. No part of this work may be reproduced, published, or distributed in any form or by any means (electronically, mechanically, photocopying, recording, or otherwise), or stored in a database retrieval system, without prior written permission of Parker Hannifin Corporation in each instance.Rev. 003Inserting additional CAN messagesSafetyDo not perform the procedures in this manual unless you are experienced in the handling of electronic equipment. Contact the manufacturer if there is anything you are not sure about or if you have any questions regarding the product and its handling or maintenance. The term "manufacturer" refers to Parker Hannifin Corporation.The following symbols are used in this document to indicate potentially hazardous situations:Danger! Risk of death or injury.Warning! Risk of damage to equipment or degradation of signal.When you see these symbols, follow the instructions carefully and proceed with caution.Work on the hydraulics control electronics may only be carried out by trained personnel who are well- acquainted with the control system, the machine, and its safety regulations.Follow the manufacturer's regulations when mounting, modifying, repairing, and maintaining equipment. The manufacturer assumes no responsibility for any accidents caused by incorrectly mounted or incorrectly maintained equipment. The manufacturer assumes no responsibility for the system being incorrectly applied, or the system being programmed in a manner that jeopardizes safety.Do not use the product if electronic modules, cabling, or connectors are damaged or if the control system shows error functions.Electronic control systems in an inappropriate installation and in combination with strong electromagnetic interference fields can, in extreme cases, cause an unintentional change of speed of the output functionThis product can expose you to chemicals known to the State of California to cause birth defects or other reproductive harm. For more information go to If welding is required for installation, complete as much as possible of the welding work before the installation of the system. If welding must be done afterwards, proceed as follows:Do not place the welding unit cables near the electrical wires of the controlsystemIf sensor has been installed and additional welding is required, remove the 4-pin connector from the sensor to avoid possible electrical damage to sensor1.Disconnect the electrical connections between the system and externalequipment2.Disconnect the negative cable from the battery3.Disconnect the positive cable from the battery4.Connect the welder's ground wire as close as possible to the place of the weldingSafety SymbolsGeneral Safety RegulationsWelding After InstallationSafety continuedThe vehicle must be equipped with an emergency stop which disconnects the supply voltage to the control system's electrical units. The emergency stop must be easily accessible to the operator. If possible, the machine must be built so that the supply voltage to the control system's electrical units is disconnected when the operator leaves the operator’s station.Incorrectly positioned or mounted cabling can be influenced by radio signals, which can interfere with the functions of the system.Danger! Risk of death or injury. Do not start the machine’s engine before the control system is mounted and its electrical functions have been verified.Do not start the machine if anyone is near the machine.Before performing any work on the hydraulics control electronics, ensure thatThe machine cannot start movingFunctions are positioned safelyThe machine is turned offThe hydraulic system is relieved from any pressureSupply voltage to the control electronics is disconnectedConstruction RegulationsSafety During InstallationSafety During Start-UpSafety During Maintenance and Fault DiagnosisThe PHK Keypads come in three sizes: 2x3, 2x4 and 3x4 buttons, with CAN interface and indicator LEDs.2X3 Keypad2X4 Keypad3X4 KeypadConnectors and PinoutsSpecificationsCAN Keypad SpecificationsThe connector on the rear panel for the PHK Keypads are Deutsch DT06 Series ConnectorsThe pins in the Deutsch DT06 connectors connect to power and CAN. The following tables show the pinouts for each connector:CommunicationAuxiliary Input/Output - Status #1PGN: 65241 hex: 0FED9DescriptionThis message is broadcast periodically or on change of state to indicate the statusThe connector The PHK keypads support CAN bus communication. The default protocol is SAE J1939 format. The PHK have 1 CAN port.The default PHK CAN messages are shown belowS o u r c e A d d r e s s P H K 12: 0x C 0 P H K 6: 0x C 1 P H K 8:0x C 2Auxiliary Input/Output - Status #2 PGN: 42752 hex: 0A700Blacklight IntensityModel StatusThe Keypad module uses the J1939 Cab Illumination message to control the keypad icon backlighting. The message Data Field contains the desired intensity.The Keypad module uses a Proprietary J1939 message to broadcast system health.Module ConfigurationAll module configuration is performed using the Proprietary-A CAN message, PGN 61184 (0xFE00). The message Data Field will contain the configuration command function, action to be taken and any parameter data. All configuration commands must be sent from Service Tool Source Address 249 (0xF9).Upon receiving a Configuration Message, the module will attempt to execute the operation and then will return the Configuration Message with the Function Extension configured to convey the status of the operation. The service tool must wait for this message to be returned before the module will be ready to accept another Configuration Message.Appendix 1: Suspect Parameter Numbers (SPN)SPN 520192 – Function Byte Data Field position: Byte 1, 8 bits Used to define the configuration function is to performNotes:1. Must be a valid PGN 2. Valid range is 10-60000 milliseconds. Use 0xFFFF for no change. Use 0 to disable periodic transmissions.3. Valid range is 0-3000 milliseconds. This value will delay the initial transmission. Used to stagger messages having the same transmit rate.SPN 520193 Action ByteData Field position: Byte 2, 8 bitsUsed to define the action the function is to performSPN 520202 Module StatusData Field position: Byte 1, 16 bitsUsed to report module supply voltageRange: 0x0000-0x8CA0 (0-36000) expressed as 0.0-36000 mV 1 mV / bit Data Field position: Byte 3, 16 bitsUsed to report Module core temperatureRange: 0x0000-0x03E8 (0-1000) expressed as millivolts 0.1 °C / bitSPN 520207 16-bit Output CAN Timeout ParametersData Field position: Byte 5, 16 bitsUsed to set the output timeout in the event of lost CAN command messages.Range: 0x0001-0xFFDC (1-65500) expressed as 0.01-655 Sec 10 mS / bit Range: 0x0000 Timeout Feature DisabledRange: 0xFFFF Leaves value unchangedData Field position: Byte 7, 16 bitsUsed to set the output state in the event of a timeout0x00 = Turn OFF output, 0x01 = Turn ON output, 0xFF = UnchangedSPN 520208 16-bit CAN Transmission ParametersData Field position: Byte 3, 16 bitsUsed to identify the PGN of the messageRange: 0xFF40-0xFF62 (PGN 65344-65378)Data Field position: Byte 5, 16 bitsUsed to set the transmission interval of the messageRange: 0x000A-0xEA60 (10-60000) 1 mS / bittransmissionRange:0x0000 DisablesRange: 0xFFFF Leaves value unchangedData Field position: Byte 7, 16 bitsUsed to set the offset or stagger for many messages with same interval.Range: 0x0000-0x0BBF (0-3000) 1 mS / bitRange: 0xFFFF Leaves value unchangedAppendix 2: Typical Configuration Sequence* EXTENDED CAN ID - Assumes message priority = 0, module address = 0xC0. Command source address must be 0xF9. Tx = message sent from service tool to module, Rx = reply sent from module back to service tool. Tx: Command to Enter Configuration ModeExt ID *DLC Byte 1Byte 2Byte 3Byte 4Byte 5Byte 6Byte 7Byte 8 0xEFC0F980x100xFF0xF90xC00x440x550x660x77 Byte 1: 0x10 = Function (Enter Configuration Mode)Byte 2: 0xFF = Sub-command (none)Byte 3: 0xF9 = Service tool AddressByte 4: 0xC0 = Module AddressByte 5-8 0x77665544 = security key (low byte first)RX Reply:Ext ID *DLC Byte 1Byte 2Byte 3Byte 4Byte 5Byte 6Byte 7Byte 8 0xEFF9C080x100x120xF90xC0n/a n/a n/a n/a Byte 1: FunctionByte 2: Success = 0x12 (Three LEDs above Key 1 will light, center LED flashing)Tx: Command to Change Module Source AddressExt ID *DLC Byte 1Byte 2Byte 3Byte 4Byte 5Byte 6Byte 7Byte 8 0xEFC01980x200x110xFF0xC10xFF0xFF0xFF0xFF Byte 1: 0x20 = Function (J1939 Source Address)Byte 2: 0x11 = Sub-command (Write)Byte 3: 0xFFByte 4: 0xC1 = New Address (Desired Address)RX Reply:Ext ID *DLC Byte 1Byte 2Byte 3Byte 4Byte 5Byte 6Byte 7Byte 8 0xEFF9C080x200x120xFF0xC10xFF0xFF0xFF0xFF Byte 1: FunctionByte 2: Success = 0x12 (NOTE: New Address will not take effect until you save and exit configuration)O O OTx: Additional configuration commandsRx: ReplyO O OTx: Command to Save Configuration and Exit to Run ModeExt ID *DLC Byte 1Byte 2Byte 3Byte 4Byte 5Byte 6Byte 7Byte 8 0xEFC0F980x110xFF0xF90xC00x440x550x660x77 Byte 1: 0x11 = Function (Exit Configuration Mode)Byte 2: 0xFF = Sub-command (none)Byte 3: 0xF9 = Service tool AddressByte 4: 0xC0 = Current Module AddressByte 5-8 0x77665544 = security key (low byte first)Manual PHK 11/2022 © 2022 Parker Hannifin CorporationParker Hannifin CorporationElectronic Motion and Controls Division850 Arthur AveElk Grove Village, IL 60007phone 800 221 9257/emc。
SIAR6-PTCH-00B
LOG(Value) LN(Value) EXP(Value) MOD（Value1，Value2） INT（Value） BCD（Logic1，Logic2，Logic3，Logic4） TAB（Value，TabNo.，Range-L，Range-H） SIN（Value） ASIN（Value） COS（Value） ACOS（Value） TAN（Value） ATAN（Value） ABS（Value） SQR（Value）
FC-运算表达式 FC0 无 FC1 有
注意事项：
1. 若需要事件列表功能，必须选择报警输出或运算表达式功能。 2. 可选附件如下表：
名称 MultiF®CC108 通讯转换器
CF 卡 CF 卡读卡器 Inscan HIS 历史数据管理软件
组态软件 Inscan 实时管理软件
功能 RS-485 通讯用
配合符号：
左括号
（
右括号
）
分隔符
模拟量输入 脉冲量输入 模拟量运算通道 开关量运算通道 定时器信号 整型常数 布尔型常数 浮点型常数 远程输入 开关量输出 时间比例输出 流量运算通道 累积通道的总累积值
工程量：量程下限~量程上限 工程量：量程下限~量程上限 工程量：量程下限~量程上限 逻辑量 0/1 逻辑量 0/1 -30000~30000 逻辑量 0/1 -(107-1)~(108-1) / 逻辑量 0/1 逻辑量 0/1 工程量：量程下限~量程上限 工程量：0~(1013-1)
要数据，便于检索。
统计列表
可手动或使用开关量输出 DO、运算开关量 VD 三种信号实现 对模拟量输入信号的自动统计，并生成报表供后续分析。可 对指定时间段内的实时值、最大值、最小值、平均值及其发 生时间、报警次数、报警时间等进行统计分析。
半导体传感器ADG201HSKRZ中文规格书
国台�Ci 埠§FEATURES 50ns max Switching Time Ove『Full Temperature Range Low R oN (30fl typ ) Single Supply Specifications for + 10.SV to + 16.5V Operation Extended Plastic Temperatu『e Range (-40。
C to +85。
Cl Break-Before-Make Switching Low Leakage (100pA ty p ) 44V Supply max Rating Available in 16-Lead DIP/SOIC and 20-Lead LCCC/PLCC Packages ADG201 H S (K, B, Tl Replaces Hl-201 H S ADG201 H S (J, A, SI Replaces DG271 GENERAL DESCRIPTION The ADG201HS is a monolithic CMOS device comprising four independently selectable SPSTswitches. It is designed on an enhanced LC 2MOS process which gives very fast switching speeds and low RoN. The switches also feature break-before-make switching action for use in multiplexer applications and low charge injection for minimum transients on the output when switching the digitalmputs. ORDERING GUIDE Temperature ����！� Model 1 Range ADG201HSJN -40。
BD6071HFN资料
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, includingt diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
芯硅谷掌上型pH计说明书
掌上型pH计说明书前言:感谢购买芯硅谷携带掌上型系列产品，内建微电脑功能，可有效测量酸碱值、氧化还原电位(选购功能)、温度。
主机设计方便携带与观看数值。
我们建议您详阅本手册，并依指示操作。
特点:●掌上型设计，方便携带使用。
●大型液晶显示屏幕及防泼水操作按键。
●简易单键三点校正(pH功能)，另可依所需值修改校正点。
●校正后显示电极斜率百分比(pH功能)，以确保电极状况。
●停止操作10分钟后自动关机。
●酸碱值与温度可自动同时显示。
(H6341-03手动调整温度) 。
规格说明<参数指标>※备注一: 若要测试氧化还原功能需选购白金电极※备注二: 电极使用温度: 0~70℃(逐渐加温)标准配备与选购配件(H6341-01&H6341-02&H6341-03)仪器本体、泛用型塑料pH电极、温度探棒(适用型号H6341-02&H6341-03)、pH7校正用标准液(50ml)、pH4校正用标准液(50ml)、9V电池、吸盘挂勾、使用说明书。
※选购配件:三合一塑料pH电极、ORP白金电极、pH10校正用标准液、220mV 校正用标准液、460mV校正用标准液、便携收纳盒、变压器pH电极、pH10校正用标准液、220mV校正用标准液、460mV 校正用标准液、便携收纳盒、变压器装置说明显示值电量/校正键调整钮温度探棒插孔切换模式键调整钮变压器插孔电极插孔屏幕显示说明:1.测量参数(酸碱值PH /氧化还原ORP)2.测试数值3.校正模式4.校正错误指示5.低电量显示6.温度数值(PH功能时显示)7.温度补偿(手动MTC/自动ATC)8.测量单位按键功能说明pH 参数测量<使用前准备>1. 拨开橘色塑料套后，打开电池盖装入电池，将pH 电极及温度探棒与仪器连接，并打开电源。
※ 注意 : 若购买三合一塑料电极，则将电极插孔与探棒插孔正确与主机连接即可。
2.将电极从保护瓶取出，用干净水清洗后擦干。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Technical Data Sheet0.5mm Height Chip LED with Full Color19-137/R6GHBHC-A01/2T Features․Package in 8mm tape on 7〞diameter reel.․Compatible with automatic placement equipment.․Compatible with infrared and vapor phase reflowsolder process.․Full-color type.․Pb-free.․ESD protection․The product itself will remain within RoHScompliant version.Descriptions․The 19-137 SMD LED is much smallerthan lead frame type components, thusenable smaller board size, higher packingdensity, reduced storage space and finallysmaller equipment to be obtained.․Besides, lightweight makes them ideal forminiature applications. etc.Applications․Backlighting in dashboard and switch.․Telecommunication: indicator and backlighting intelephone and fax.․Flat backlight for LCD, switch and symbol.․General use.Device Selection GuideChipLens ColorColorType Material EmittedRedR6 AlGaInP BrilliantWater ClearGreenGH InGaN BrilliantBH InGaN Blue19-137/R6GHBHC-A01/2T Package Outline DimensionsNote: The tolerance unless mentioned is ±0.1mm,unit is mm.19-137/R6GHBHC-A01/2T Absolute Maximum Ratings (Ta=25℃)Parameter SymbolRating Unit Reverse Voltage V R 5 VForward Current I F R6:25GH:25BH:25mAOperating Temperature Topr -40 ~ +85 ℃Storage Temperature Tstg -40 ~ +90 ℃Electrostatic Discharge(HBM) ESD 2000 VPower Dissipation PdR6:60GH:110BH:110mWPeak Forward Current (Duty 1/10 @1KHz) I FPR6:60GH:100BH:100mASoldering Temperature Tsol Reflow Soldering : 260 ℃for 10 sec. Hand Soldering : 350 ℃for 3 sec.19-137/R6GHBHC-A01/2TElectro-Optical Characteristics (Ta=25℃)Parameter Symbol Min. Typ. Max. Unit ConditionLuminous IntensityR6Iv GHBH7211228.510018050----- mcdViewing Angle2θ1/2----- 120 ----- degPeak WavelengthR6λp GHBH-----632518468----- nmDominant WavelengthR6λd GHBH-----624525470----- nmSpectrum Radiation Bandwidth R6△λ GHBH -----203535----- nmForward VoltageR6V F GHBH1.72.72.72.03.33.32.43.73.7VI F=20mAReverse CurrentR6I R GHBH----- -----10NANAμA V R=5VNotes:1.Tolerance of Luminous Intensity ±10%19-137/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves19-137/R6GHBHC-A01/2T Typical Electro-Optical Characteristics CurvesBH19-137/R6GHBHC-A01/2T Label explanationCAT:Luminous Intensity RankHUE: Dom. Wavelength RankREF:Forward Voltage RankReel DimensionsNote: The tolerance unless mentioned is ±0.1mm,unit is mm.19-137/R6GHBHC-A01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reelNote: The tolerance unless mentioned is ±0.1mm ,unit is mm.19-137/R6GHBHC-A01/2TReliability Test Items And ConditionsThe reliability of products shall be satisfied with items listed below. Confidence level ：90% LTPD ：10%No. Items Test Condition Test Hours/Cycles SampleSizeAc/Re1 Reflow Soldering Temp. : 260℃±5℃Min. 5sec. 6 Min.22 PCS.0/1 2 Temperature Cycle H : +100℃ 15min∫ 5 minL : -40℃ 15min 300 Cycles 22 PCS.0/13 Thermal Shock H : +100℃ 5min∫ 10 secL : -10℃ 5min300 Cycles 22 PCS.0/1 4High TemperatureStorageTemp. : 100℃ 1000 Hrs. 22 PCS.0/1 5Low TemperatureStorage Temp. : -40℃ 1000 Hrs. 22 PCS.0/1 6 DC Operating Life I F = 20 mA 1000 Hrs. 22 PCS.0/1 7 High Temperature /High Humidity85℃/ 85% RH1000 Hrs.22 PCS.0/1元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-137/R6GHBHC-A01/2TPrecautions For Use1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use.2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.Everlight Electronics Co., Ltd. Device No. : DSE-137-A01 Prepared date: 06-Apr-2006Rev. 1Page: 11 of 12Prepared by : Alex Chen元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-137/R6GHBHC-A01/2T4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.CTel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 Everlight Electronics Co., Ltd. Device No. : DSE-137-A01 Prepared date: 06-Apr-2006Rev. 1Page: 12 of 12Prepared by : Alex Chen。