购销合同英文范本

合集下载

英文销售合同模板3篇

英文销售合同模板3篇篇1Seller: ________ (Seller's Name)Buyer: ________ (Buyer's Name)This Sales Contract is made on ________ (Date) by and between the Seller and the Buyer:WHEREAS the Seller is willing to sell and the Buyer is willing to purchase the under mentioned commodity according to the terms and conditions stipulated below:I. commodity:The Seller agrees to sell and the Buyer agrees to purchase the following commodity:_______ (Commodity details, including product name, model, quantity, specifications, quality, etc.)II. Origin of the Goods: ________ (Origin of Goods)III. Price and Payment Terms:The Price of the commodity is to be fixed as ________ (Price) only. The payment shall be made as follows:1. A deposit of 10% of the total contract value shall be paid by the Buyer to the Seller's account within ________ (Time Limit) after this contract is signed.2. The balance of payment shall be made by the Buyer against the Seller's presentation of shipping documents through a bank in ________ (Bank Name) within ________ (Time Limit) after the date of shipment.IV. Delivery:篇2SALES CONTRACTThis Sales Contract is made by and between the following two parties:Buyer: ______________ (Hereinafter referred to as "Party A")Seller: ______________ (Hereinafter referred to as "Party B")In accordance with the principles of sincerity and mutual benefit and the relevant laws and regulations, both parties,through friendly consultations, agree to the following terms and conditions for the sale of products:Article 1: Product Description and QuantityProduct name: _______________Product specifications: _______________Product quantity: _______________ (Number of items)Delivery date: _______________Other specific requirements: _______________ (If any)Article 2: Price and Payment TermsTotal contract value: USD _______________ (The total contract value should be clearly stated)Price terms: FOB/CIF/CFR _______________ (Price terms should be clearly stated)Payment terms: _______________% T/T in advance,_______________% against the copy of B/L. Other payment methods such as L/C at sight are also acceptable.Article 3: Delivery and Shipping TermsDelivery time: _______________ (Delivery time should be clearly stated)Port of loading: _______________ (The port of loading should be clearly stated)Means of transportation: By sea/By air/By land, etc. (As agreed by both parties)Other shipping terms and conditions: _______________ (If any)Article 4: Quality Standards and WarrantyQuality standards: in accordance with the standards specified in the contract or the standards commonly used in the international market. If there is no such standard, it shall be agreed by both parties.Other specific quality requirements: _______________ (If any)Article 5: Inspection and AcceptanceArticle 6: Packing and MarkingArticle 7: Delay Delivery PenaltyArticle 8: Settlement of DisputesArticle 9: Other TermsBuyer Signature ____________________________________________ Date ___________________ Seller Signature____________________________________________ Date___________________ （Signature）（Date）（Signature）（Date）请注意，上述合同仅为示例并非专业法律意见。

关于英文销售合同范本6篇

关于英文销售合同范本6篇篇1Sales ContractThis Sales Contract (“Contract”) is made and entered into by and between Seller and Buyer on this day___________(date).1. Sale of Goods:Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods:- Description of goods- Quantity- Price2. Payment Terms:Buyer shall pay Seller the total amount of $_____________ for the goods purchased. Payment shall be made in full within ______ days of the date of this Contract. Payment shall be made in the form of [cash, check, wire transfer, etc.].3. Delivery:Seller shall deliver the goods to Buyer at the following address:- Delivery addressDelivery shall be made on or before ____________(date). Time is of the essence in this Contract.4. Inspection:Buyer shall have the right to inspect the goods upon delivery. Buyer must notify Seller of any defects or nonconformities within _______ days of delivery.5. Warranties:Seller warrants that the goods:- Are free from defects in material and workmanship- Conform to the specifications set forth in this Contract- Are fit for the particular purpose for which they are intendedSeller’s liability under this warranty shall be limited to repairing or replacing the defective goods.6. Indemnification:Seller shall indemnify and hold Buyer harmless from and against any claims, damages, losses, liabilities, and expenses arising out of or related to the goods sold under this Contract, including but not limited to claims of infringement of intellectual property rights.7. Governing Law:This Contract shall be governed by and construed in accordance with the laws of the State of___________.8. Entire Agreement:This Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes all prior agreements, representations, and understandings.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.Seller____________________________Buyer____________________________This document reflects the entire agreement between Seller and Buyer for the sale of goods in question. It is recommended that both parties review this Contract carefully and seek legal advice if necessary before signing.篇2Sales ContractThis Sales Contract (“Contract”) is entered into on [Date] by and between [Seller], located at [Address] (“Seller”) and [Buyer], located at [Address] (“Buyer”).1. Sale of GoodsSeller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the “Goods”): [Description of Goods] in the quantity and price set forth in Exhibit A attached hereto.2. DeliverySeller shall deliver the Goods to Buyer at the location specified by Buyer on [Delivery Date]. Buyer shall be responsible for all shipping costs.3. PaymentBuyer shall pay Seller the total purchase price for the Goods in the amount of [Total Amount], payable as follows: [Payment Terms]. Payment shall be made in [Currency] by [Payment Method].4. InspectionBuyer shall have [Number] days from the date of delivery to inspect the Goods. If Buyer finds any defects or nonconformities, Buyer shall notify Seller in writing within [Number] days of the delivery date. Seller shall have the option to refund Buyer or replace the defective Goods.5. Representations and WarrantiesSeller represents and warrants that the Goods are free from defects in materials and workmanship and are fit for the purpose intended.6. Limitation of LiabilityIn no event shall Seller be liable to Buyer for any indirect, special, incidental, or consequential damages arising out of or in connection with this Contract.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Entire AgreementThis Contract constitutes the entire agreement between Seller and Buyer and supersedes any prior agreements or understandings.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.Seller: _____________________________Buyer: ______________________________Exhibit A: Description of Goods[Insert Description of Goods][Signatures]This Sales Contract is hereby executed by the parties as of the date first above written.Seller: _____________________________Buyer: ______________________________I. General Terms and ConditionsThis Sales Contract (the "Agreement") is entered into by and between [SELLER NAME] ("Seller") and [BUYER NAME] ("Buyer") on [SIGNING DATE] (the "Effective Date"). Seller and Buyer agree as follows:1. Sale, Quantity, and Description of Goods. Seller agrees to sell and Buyer agrees to purchase the goods (the "Goods") in the quantities and descriptions set forth in Exhibit A attached hereto.2. Purchase Price. The purchase price for the Goods shall be as set forth in Exhibit A and shall be paid to Seller in accordance with the payment terms set forth in Exhibit B.3. Delivery of Goods. The Goods shall be delivered by Seller to Buyer at the location specified by Buyer on or before the delivery date set forth in Exhibit A.4. Title and Risk of Loss. Title to and risk of loss for the Goods shall pass to Buyer upon delivery of the Goods by Seller to the carrier at the point of shipment.5. Inspection and Acceptance. Buyer shall have [NUMBER] days from the date of delivery of the Goods to inspect the Goods and to notify Seller of any nonconformities. Buyer's failure to notify Seller of any nonconformities within such period shall constitute acceptance of the Goods.6. Warranties. Seller hereby warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in material and workmanship. Seller's liability under this warranty shall be limited to replacement of the nonconforming Goods.7. Limitation of Liability. In no event shall Seller be liable to Buyer for any special, consequential, or incidental damages arising out of or relating to this Agreement.8. Governing Law. This Agreement shall be governed by and construed in accordance with the laws of the State of [STATE].9. Entire Agreement. This Agreement constitutes the entire agreement between Seller and Buyer with respect to the sale of the Goods and supersedes all prior agreements or understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the Effective Date.SELLER: BUYER:_________________________ _________________________[SELLER NAME] [BUYER NAME]Exhibit A: Description of Goods[DESCRIPTION OF GOODS]Exhibit B: Payment Terms[PAYMENT TERMS]II. Specific Provisions1. Termination. This Agreement may be terminated by either party upon [NUMBER] days written notice for any reason.2. Force Majeure. Neither party shall be liable for any failure or delay in performing its obligations under this Agreement to the extent such failure or delay is caused by circumstances beyond its reasonable control.3. Confidentiality. Seller and Buyer shall keep confidential all information received from the other party in connection with this Agreement and shall not disclose such information to any third party without the other party's prior written consent.4. Assignment. Neither party may assign its rights or obligations under this Agreement without the other party's prior written consent.5. Counterparts. This Agreement may be executed in one or more counterparts, each of which shall be deemed an original and all of which together shall constitute one and the same instrument.6. Modification. This Agreement may be modified only by a written instrument signed by both parties.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the Effective Date.SELLER: BUYER:_________________________ _________________________[SELLER NAME] [BUYER NAME]篇3Sales ContractThis sales contract (the "Contract") is made and entered into on [date], by and between [Seller name], having its principal place of business at [Seller address] and [Buyer name], having its principal place of business at [Buyer address].1. Goods Sold: The Seller agrees to sell and deliver to the Buyer the following goods (the "Goods"):- [Description of goods]- Quantity: [Number of units]- Price: [Price per unit]2. Payment Terms: The Buyer agrees to pay the Seller the total amount of [total amount] for the Goods. Payment shall be made in [currency] within [number] days of the delivery of the Goods.3. Delivery: The Seller agrees to deliver the Goods to the Buyer at the following location: [Delivery address]. Delivery shall be made on or before [delivery date].4. Inspection: The Buyer shall have the right to inspect the Goods upon delivery. If the Goods are not in conformity with the Contract, the Buyer may reject the Goods and notify the Seller within [number] days.5. Warranty: The Seller warrants that the Goods are free from defects in materials and workmanship. If any defects are found within [warranty period], the Seller shall replace the Goods at no additional cost to the Buyer.6. Governing Law: This Contract shall be governed by the laws of [State/Country]. Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [City], in accordance with the rules of the [Arbitration association].7. Entire Agreement: This Contract constitutes the entire agreement between the parties and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter of this Contract.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.[Seller Signature] [Buyer Signature]篇4Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into on [Date], by and between [Seller], with a business address at [Address], and [Buyer], with a business address at [Address].1. Sale of Goods: The Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of Goods]2. Price: The total purchase price for the goods shall be [Price]. The price is inclusive of all taxes, duties, and other charges.3. Delivery: The Seller shall deliver the goods to the Buyer at [Delivery Location] on or before [Delivery Date]. The Buyer shall bear any additional costs for expedited delivery.4. Payment: The Buyer shall pay the total purchase price in full upon delivery of the goods. Payment shall be made in [Currency] by [Payment Method].5. Warranties: The Seller warrants that the goods shall be free from defects in material and workmanship for a period of [Warranty Period]. The Seller shall repair or replace any defective goods at no additional cost to the Buyer.6. Indemnification: The Seller shall indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising from the use or sale of the goods.7. Governing Law: This Contract shall be governed by the laws of [Jurisdiction]. Any disputes arising out of or relating to this Contract shall be resolved through arbitration in [Arbitration Location].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale of goods and supersedes all prior agreements, written or oral.IN WITNESS WHEREOF, the parties have executed this Contract on the date first above written.Seller: ________________________Buyer: ________________________Date: ________________________This Sales Contract is a legally binding agreement between the Seller and the Buyer for the sale of goods. Both parties should carefully review and understand the terms and conditions before signing.篇5Sales contract1. Parties to the contract:This Sales Contract (hereinafter referred to as "Contract") is entered into between:Seller: [Name of the Seller]Registered address: [Address of the Seller]Contact person: [Name of the Contact person]Telephone: [Contact number]Email: [Email address]Buyer: [Name of the Buyer]Registered address: [Address of the Buyer]Contact person: [Name of the Contact person]Telephone: [Contact number]Email: [Email address]2. Product details:The Seller agrees to sell and the Buyer agrees to purchase the following products:Product name: [Name of the product]Description: [Brief description of the product]Quantity: [Quantity of the product]Unit price: [Price per unit]Total price: [Total price of the products]3. Payment terms:The Buyer agrees to pay the total amount of the products to the Seller in the following manner:- 30% of the total amount as a deposit upon signing of the contract- 70% of the total amount upon delivery of the productsPayment method: [Payment method]Currency: [Currency]Payment deadline: [Deadline for payment]4. Delivery terms:The Seller agrees to deliver the products to the Buyer at the following address:Delivery address: [Address of delivery]Delivery method: [Method of delivery]Delivery time: [Time of delivery]5. Quality assurance:The Seller guarantees that the products supplied under this Contract meet the required quality standards. In case of any defects or non-conformities, the Seller agrees to replace or refund the affected products.6. Governing law:This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].7. Dispute resolution:Any disputes arising out of or in connection with this Contract shall be settled amicably through negotiations between the Parties. If no resolution can be reached, the Parties agree tosubmit the dispute to arbitration in accordance with the rules of [Arbitration Institution].8. Miscellaneous:This Contract constitutes the entire agreement between the Parties and supersedes any previous agreements or understandings, written or oral, relating to the subject matter hereof.In witness whereof, the Parties have executed this Contract as of the date first above written.Seller:Signature: _____________________Printed name: _________________Date: _______________________Buyer:Signature: _____________________Printed name: _________________Date: _______________________篇6Sales ContractThis Sales Contract ("Contract") is made and entered into as of [Contract Date], by and between [Seller], a company incorporated under the laws of [Seller's Country], with its principal place of business at [Seller's Address], and [Buyer], a company incorporated under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A attached hereto (the "Goods").2. Price: The Purchase Price shall be as set forth in Exhibit A, and shall be paid by Buyer to Seller in the manner set forth in Exhibit A.3. Delivery: Seller shall deliver the Goods to Buyer at the location set forth in Exhibit A. Delivery shall be made on or before the delivery date set forth in Exhibit A.4. Acceptance: Buyer shall inspect the Goods promptly upon delivery. If Buyer finds any defects in the Goods, Buyer shall notify Seller within [number] days of delivery and provide Seller with a written description of the defects. Upon receiving suchnotice, Seller shall take reasonable steps to correct the defects in the Goods.5. Title and Risk of Loss: Title and risk of loss to the Goods shall pass to Buyer upon delivery of the Goods to Buyer.6. Warranty: Seller warrants that the Goods will conform to the specifications set forth in Exhibit A. Seller further warrants that the Goods will be free from defects in materials and workmanship for a period of [number] months from the date of delivery.7. Limitation of Liability: In no event shall Seller be liable to Buyer for any indirect, special, incidental, consequential or punitive damages arising out of or in connection with this Contract, whether or not Seller has been advised of the possibility of such damages.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].9. Entire Agreement: This Contract represents the entire agreement between the parties with respect to the sale of the Goods, and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Sales Contract as of the date first above written.[Seller]By: _______________________Name: _________________Title: _________________[Buyer]By: _______________________Name: _________________Title: _________________EXHIBIT AGoods: [Description of Goods]Purchase Price: [Price]Delivery Date: [Date]Delivery Location: [Address]。

销售合同英文范本6篇

销售合同英文范本6篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is the owner of a certain quantity of goods described in this Contract and desires to sell and the Buyer agrees to buy the same on the terms and conditions stipulated below:1. PRODUCTS AND QUANTITYThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Specify the product name, model number, specifications, quantity, etc.] The total quantity to be sold and purchased shall be clearly stated in the invoice.2. PRICE AND PAYMENTThe price of the goods shall be as per the list attached to this Contract. The total amount payable by the Buyer to the Seller shall be [specify the total amount]. Payment terms are as follows: [Insert terms such as deposit payment prior to delivery, full payment upon delivery, etc.] All banking fees shall be borne by the party designated for payment.3. DELIVERY AND TIME OF DELIVERYThe Seller shall deliver the goods to the Buyer at the agreed place of delivery within [specify a reasonable time frame]. Any delay in delivery must be notified to the Buyer in writing. The risk of loss or damage to the goods shall pass to the Buyer upon delivery.4. QUALITY AND GUARANTEEThe Seller guarantees that the goods are new and of good quality, free from defects in material and workmanship, and comply with all applicable specifications and standards. The Seller shall replace any goods found defective within a reasonable period after delivery.5. PACKAGING AND MARKINGThe Seller shall pack the goods properly and ensure that they are clearly marked with necessary identification marks, labels, and other necessary information. The cost of packaging shall be borne by the Seller unless otherwise agreed by the Buyer.6. INSPECTION AND ACCEPTANCEThe Buyer has the right to inspect the goods during production and prior to delivery. Upon receipt of the goods, the Buyer shall have a reasonable period to inspect and accept or reject the goods in accordance with this Contract. Any rejected goods must be returned to the Seller at the Seller's cost and risk.7. FORCE MAJEURENeither party shall be liable for failure to perform any obligation under this Contract due to causes beyond their reasonable control, such as acts of war, riots, strikes, floods, fire, etc. However, the affected party shall notify the other party promptly in writing and provide evidence of such occurrence.8. CONFIDENTIALITY AND NON-DISCLOSUREBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure and shallnot disclose it to any third party without the prior written consent of the other party.9. TERMINATIONThis Contract may be terminated by either party in writing if there is a breach of any term or condition by the other party that cannot be rectified within a reasonable period of time. Termination shall not affect any obligation that has already been incurred by either party prior to termination.10. MISCELLANEOUSThe Buyer The Seller(Authorized Representative) (Authorized Representative)Date: Date:Signature: Signature:Company Name: Company Name:Address: Address:Telephone No.: Telephone No.:Email Address: Email Address: 邮件地址篇2SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products under the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the specifications listed in Annex A attached to this Contract.2. Quantity and Price:The Seller agrees to sell the products in the quantity specified in Annex A at the prices specified therein. The prices are fixed and firm for the duration of this Contract.3. Terms of Payment:Payment shall be made by the Buyer to the Seller as follows: __% (percentage) of the total contract value upon signing of this Contract; __% (percentage) upon delivery of the goods; and the balance upon receipt of the Seller's performance bond or other guarantee documents. All payments shall be made in the currency specified in Annex B.4. Delivery:The Seller shall deliver the products to the port specified in Annex C within the time agreed upon in this Contract. The Seller shall be responsible for arranging transportation of the goods and shall bear all expenses related to delivery.5. Quality Inspection and Warranty:The Seller guarantees that all products are new and of good quality, free from any defects, and comply with all applicable specifications and standards. The Seller shall provide necessary quality inspection certificates and other documents. The Buyer shall have the right to conduct its own quality inspections at the loading port.6. Packing and Marking:The Seller shall pack the products in a proper manner to ensure safe transportation to the port specified in Annex C. The packages shall be properly marked with contract number, product name, quantity, weight, and other necessary information.7. Risk and Insurance:Risk of loss or damage to the products shall pass to the Buyer upon delivery at the port specified in Annex C. The Seller shall arrange for insurance of the goods during transportation at its own cost. The insurance shall cover at least 110% of the total contract value against all risks commonly covered for such goods. The insurance certificate shall be handed over to the Buyer on delivery of the goods.8. Terms of Settlement for Disputes:篇3SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products from the Seller,NOW THEREFORE, the parties hereby agree as follows:Article 1: Contract ProductThe product to be sold under this Contract is [describe the product in detail]. The specifications and quantity of the product are listed in the attached schedule.Article 2: Price and PaymentThe price of the product shall be as stated in the attached schedule. The payment shall be made through [specify payment method] within [specify time frame] after the date of delivery.Article 3: Delivery and ShippingThe Seller shall deliver the product to the Buyer at the shipping address specified by the Buyer. The delivery date shall be as stated in the attached schedule. Shipping and transportation risks shall be borne by [specify which party bears these risks].Article 4: Quality and InspectionThe Seller shall ensure that the product meets the quality standards specified in this Contract. The Buyer shall have the right to inspect the product during production and upon delivery. If any defects are found, the Seller shall promptly replace or repair the product.Article 5: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. Neither party shall disclose such information to any third party without the prior written consent of the other party.Article 6: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events, such as natural disasters, wars, riots, or government policies, provided that the affected party promptly notifies the other party of such events and takes reasonable measures to mitigate their effects.Article 7: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of [specify duration] for the product. During this period, any defects in material or workmanship shall be repaired or replaced free ofcharge. The Seller shall also provide after-sales service as specified in the attached schedule.Article 8: TerminationThis Contract may be terminated by either party giving written notice to the other party in case of fundamental breach by either party. The party seeking termination shall give reasonable notice and provide evidence of such breach. The provisions of this Contract concerning confidentiality, warranty, and any obligations arising prior to termination shall survive termination.Article 9: Jurisdiction and LawThis Contract shall be governed by the laws of [specify country/jurisdiction]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to [specify court/arbitration institution] for resolution.Article 10: MiscellaneousThis Contract constitutes the entire agreement between the parties for the sale of the product. No modification or amendment shall be binding unless made in writing and signedby both parties. This Contract is made in [specify language] only, and any translation provided for reference only.IN WITNESS WHEREOF, the parties have executed this Contract by their authorized representatives on the dates specified below.Buyer:(Authorized Representative)Date:Seller:(Authorized Representative)Date:[Note: This is a general sales contract template and may need to be modified to fit specific circumstances.]篇4SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products from the Seller on the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the following specifications: [specific details of the products to be sold, including name, model, quantity, quality, specifications, etc.].2. Price and Payment:The total contract price is [specify the total contract price]. The payment terms are as follows: [describe the payment terms, e.g., 30% advance payment, balance upon delivery, payment through bank transfer or other methods].3. Delivery:The Seller shall deliver the products to the Buyer at the following address: [delivery address]. The delivery date shall be [specify the delivery date]. Any delay in delivery shall be notified to the Buyer in advance.4. Quality Assurance:The Seller guarantees that the products are of good quality and comply with all applicable standards. The Seller shall be responsible for any defects in material or workmanship.5. Warranty:The Seller warrants that the products are new and not previously used. The Seller shall replace any defective products or make necessary repairs during the warranty period.6. Force Majeure:In case of force majeure events, such as natural disasters, war, political unrest, etc., which prevent or hinder the performance of this Contract, the Seller shall notify the Buyer immediately and seek to resolve the issue as soon as possible.7. Confidentiality:Both parties shall keep confidential all information related to this Contract, including product specifications, pricing, and business strategies.8. Termination:This Contract may be terminated by either party in case of breach of any term or condition by the other party. The partyseeking termination shall provide a written notice to the other party specifying the reasons for termination.9. Disputes:Any disputes arising out of or in connection with this Contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [specify court/tribunal] for resolution.10. Miscellaneous:This Contract is made in duplicate originals, each party holding one original. This Contract shall be governed by and construed in accordance with the laws of [specifycountry/jurisdiction]. Any amendment or modification to this Contract shall be made in writing and signed by both parties. This Contract is effective from the date of signing by both parties.Buyer: _____________________Seller: _____________________Date: _____________________篇5SALES CONTRACT销售合同This Sales Contract is made by and between [买方名称], hereinafter referred to as "Buyer" and [卖方名称], hereinafter referred to as "Seller", whereby both parties agree as follows:一、商品条款Article 1: Commodity1. 商品名称：____________________（请填写商品名称）2. 商品规格：____________________（请填写商品规格）3. 单位价格：____________________（请填写单价）4. 总金额：（小写）____________________ （大写）____________________（人民币）二、价格与货币条款Article 2: Price and Terms of Payment1. 除非另有规定，“CIP价格”应包括卖方将货物交运至指定的目的地的所有成本与费用，包括运输成本及保险费。

英文购销合同范本6篇

英文购销合同范本6篇篇1Sales ContractThis Sales Contract is made and entered into on this [date] by and between [Seller], with its principal place of business located at [address], hereinafter referred to as the "Seller", and [Buyer], with its principal place of business located at [address], hereinafter referred to as the "Buyer".1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following products:- Description of product 1: [specifications]- Description of product 2: [specifications]- Description of product 3: [specifications]2. QuantityThe Buyer agrees to purchase a total quantity of [quantity] units of the above-mentioned products.3. PriceThe total price for the products shall be [total price] USD, inclusive of all taxes and duties. Payment shall be made in [currency] through [payment method].4. DeliveryThe Seller shall deliver the products to the Buyer's designated location at [address] within [number] days of the signing of this contract. The Seller shall bear all costs and risks of transportation.5. Quality AssuranceThe Seller guarantees that all products delivered shall meet the required specifications and quality standards as agreed upon in this contract. The Buyer has the right to inspect the products upon delivery and reject any non-conforming products.6. WarrantyThe Seller warrants that the products sold are free from defects in material and workmanship and shall comply with all applicable laws and regulations. Any defective products shall be replaced by the Seller at no cost to the Buyer.7. ConfidentialityBoth parties agree to maintain the confidentiality of all information exchanged during the course of this contract and not disclose any proprietary information to third parties without prior written consent.8. Governing LawThis Sales Contract shall be governed by and construed in accordance with the laws of [jurisdiction].In witness whereof, the parties hereto have executed this contract as of the date first above written.Seller: ________________________ Date: ___________Buyer: ________________________ Date: ____________This Sales Contract contains the entire agreement between the Seller and Buyer and supersedes all prior agreements and understandings, whether written or oral.篇2Sample English Sales and Purchase ContractThis Sales and Purchase Contract is entered into on [Date] by and between:Seller: [Name of Seller]Address: [Seller's Address]Contact: [Seller's Contact Information]Buyer: [Name of Buyer]Address: [Buyer's Address]Contact: [Buyer's Contact Information]1. Product Description:The Seller agrees to sell and the Buyer agrees to purchase the following products:- Product Name: [Name of Product]- Quantity: [Number of Units]- Description: [Detailed Description of Product]2. Price:The total purchase price for the products listed above is [Total Price], which includes all applicable taxes and shipping fees. Payment shall be made in [Currency] by [Payment Method], with [Details of Payment Terms].3. Delivery:The Seller agrees to deliver the products to the Buyer's address at [Delivery Address] within [Delivery Timeframe]. The Buyer shall be responsible for any customs duties or taxes imposed upon the products.4. Inspection and Acceptance:The Buyer shall inspect the products upon delivery and shall have [Number of Days] days to notify the Seller of any defects or discrepancies. Failure to do so shall constitute acceptance of the products.5. Warranty:The Seller warrants that the products shall conform to the description provided and shall be free from any defects in materials or workmanship for a period of [Warranty Period]. The Seller's sole liability under this warranty shall be to repair or replace any defective products.6. Liability:Neither party shall be liable for any indirect, incidental, or consequential damages arising from the sale or purchase of the products.7. Governing Law:This contract shall be governed by the laws of [Jurisdiction].8. Entire Agreement:This contract constitutes the entire agreement between the parties and supersedes any prior agreements or understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Sales and Purchase Contract as of the date first above written.Seller: _________________________Buyer: _________________________篇3Sales and Purchase ContractThis Sales and Purchase Contract is entered into on this [date] day of [month], [year], between [seller], with its principal place of business located at [address], hereinafter referred to as the "Seller," and [buyer], with its principal place of business located at [address], hereinafter referred to as the "Buyer."1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products: [list of products].2. Quantity: The Buyer agrees to purchase [quantity] of the products as specified in clause 1.3. Price: The parties agree that the price for the products shall be [price per unit] per unit. The total purchase price shall be [total price].4. Payment: The Buyer agrees to pay the total purchase price within [number] days of the signing of this agreement.5. Delivery: The Seller agrees to deliver the products to the Buyer at [delivery location] on or before [delivery date]. The Buyer shall be responsible for any shipping costs incurred.6. Inspection and Acceptance: The Buyer shall have [number] days from the date of delivery to inspect the products and notify the Seller of any defects or discrepancies. Failure to notify the Seller within this timeframe shall constitute acceptance of the products.7. Title and Risk of Loss: Title to the products shall pass to the Buyer upon delivery. The risk of loss shall remain with the Seller until delivery.8. Warranty: The Seller warrants that the products are free from defects in materials and workmanship. The Seller's liabilityunder this warranty shall be limited to the replacement or repair of defective products.9. Governing Law: This agreement shall be governed by the laws of [state/country].10. Entire Agreement: This agreement constitutes the entire understanding between the parties and supersedes all prior agreements or understandings.IN WITNESS WHEREOF, the parties hereto have executed this Sales and Purchase Contract as of the date first above written.[Signature of Seller] [Signature of Buyer][Name of Seller] [Name of Buyer]篇4Sales and Purchase ContractThis Sales and Purchase Contract (the "Contract") is made on this [Date], by and between:Seller: [Seller's Name]Address: [Seller's Address]Contact number: [Seller's contact number]Email: [Seller's Email]Buyer: [Buyer's Name]Address: [Buyer's Address]Contact number: [Buyer's contact number]Email: [Buyer's Email]Hereinafter referred to as the "Parties".1. Subject of the ContractThe Seller agrees to sell and the Buyer agrees to purchase the following goods:- Description of Goods:- Quantity:- Price per unit:- Total Price:2. DeliveryThe Seller shall deliver the goods to the Buyer's address as follows:- Delivery date:- Delivery method:- Delivery cost:3. PaymentThe Buyer agrees to pay the Seller the total price of the goods in the following manner:- Payment method:- Payment terms:- Due date:4. Inspection and AcceptanceUpon delivery of the goods, the Buyer shall inspect the goods and notify the Seller of any defects or discrepancies within [number] days. Failure to do so shall constitute acceptance of the goods.5. WarrantiesThe Seller warrants that the goods are free from defects in materials and workmanship and conform to the specifications provided. The Seller further warrants that they have good title to the goods and have the right to sell them to the Buyer.6. Governing LawThis Contract shall be governed by the laws of[State/Country] and any disputes arising out of this Contract shall be resolved through arbitration.7. Entire AgreementThis Contract constitutes the entire agreement between the Parties and supersedes any prior agreements or understandings, whether written or oral.In witness whereof, the Parties hereto have executed this Contract on the date first above written.Seller: ________________________ Date: ___________Buyer: ________________________ Date: ___________This Sales and Purchase Contract is hereby accepted and approved by both Parties.[Signature of Seller][Signature of Buyer][Name of Signatory][Title of Signatory]篇5Sales and Purchase ContractThis Sales and Purchase Contract (the "Contract") is entered into on [date], by and between [Seller], having its principal place of business at [address] ("Seller"), and [Buyer], having its principal place of business at [address] ("Buyer").1. Sale of GoodsSeller agrees to sell, and Buyer agrees to purchase, the following goods (the "Goods"):Description: [Description of goods]Quantity: [Quantity of goods]Unit Price: [Price per unit]Total Price: [Total price]2. DeliveryThe Goods shall be delivered by Seller to Buyer at [delivery location] on or before [delivery date]. Delivery shall be made during normal business hours, unless otherwise agreed upon by both parties.3. Inspection and AcceptanceBuyer shall have the right to inspect the Goods upon delivery. Buyer must notify Seller of any non-conformities within [number]days of delivery. If no notice is given, Buyer shall be deemed to have accepted the Goods.4. PaymentBuyer agrees to pay Seller the total price of the Goods in full within [number] days of delivery. Payment shall be made in [currency] by [method of payment]. Late payments shall incur a late fee of [percent]% per week.5. Risk of LossRisk of loss of the Goods shall pass from Seller to Buyer upon delivery.6. WarrantiesSeller warrants that the Goods are free from defects in material and workmanship. If any defects are found within [number] days of delivery, Seller shall replace the defective Goods at no additional cost to Buyer.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [state/country].8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether oral or written.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first written above.Seller: ___________________________[Name and Title]Buyer: ___________________________[Name and Title]篇6Purchase and Sale ContractThis Purchase and Sale Contract (the "Contract") is entered into as of [Date], by and between [Seller], with a principal place of business at [Address], and [Buyer], with a principal place of business at [Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods described as follows: [Description of Goods]. The goods shall be delivered by Seller to Buyer at [Delivery Location] on [Delivery Date].2. Price: The purchase price for the goods shall be [Price] per unit. Payment shall be made by Buyer to Seller in [Currency] within [Number] days of delivery of the goods.3. Delivery: The goods shall be delivered by Seller to Buyer at the Delivery Location on the Delivery Date. Buyer shall have the right to inspect the goods upon delivery and shall notify Seller of any defects or non-conformities within [Number] days.4. Title and Risk of Loss: Title to and risk of loss of the goods shall pass from Seller to Buyer upon delivery of the goods at the Delivery Location.5. Warranties: Seller warrants that the goods shall conform to the description provided and shall be free from defects in materials and workmanship. Seller further warrants that Seller has good and marketable title to the goods and has the right to sell the goods to Buyer.6. Indemnification: Seller shall indemnify and hold Buyer harmless from and against any claims, damages, losses, and expenses arising out of Seller's breach of any warranty or representation in this Contract.7. Governing Law and Jurisdiction: This Contract shall be governed by and construed in accordance with the laws of[Jurisdiction]. Any disputes arising under this Contract shall be resolved by arbitration in [Jurisdiction], in accordance with the rules of the [Arbitration Body].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.Seller: [Name]Buyer: [Name]Date: [Date]。

英文销售合同模板5篇

英文销售合同模板5篇篇1Sales ContractThis Sales Contract (the "Contract") is entered into on this ___ day of ____, 20__ (the "Effective Date"), by and between [Seller Name], with a principal place of business at [Seller Address] (the "Seller"), and [Buyer Name], with a principal place of business at [Buyer Address] (the "Buyer").1. Sale of Goods. Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"), as described in Exhibit A attached hereto.2. Purchase Price. The purchase price for the Goods shall be $____________, payable by Buyer to Seller in the following manner: [Payment terms].3. Delivery. Seller shall deliver the Goods to Buyer's address as specified in Exhibit A. Delivery shall be made on or before [Delivery date]. Buyer is responsible for all shipping and handling costs.4. Inspection and Acceptance. Buyer shall have the right to inspect the Goods upon delivery. Any Goods not conforming to the specifications in Exhibit A shall be rejected by Buyer. Seller shall promptly replace any rejected Goods at Seller's own cost.5. Warranties. Seller warrants that the Goods are free from defects in material and workmanship. Seller further warrants that the Goods will conform to the specifications in Exhibit A. Seller's warranties shall survive acceptance and payment by Buyer.6. Limitation of Liability. In no event shall either party be liable for any consequential, incidental, special, or punitive damages arising from or related to this Contract, whether based in contract, tort, or otherwise.7. Governing Law. This Contract shall be governed by and construed in accordance with the laws of the State of [State].8. Entire Agreement. This Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior discussions, agreements, and understandings.9. Counterparts. This Contract may be executed in counterparts, each of which shall be deemed an original, but all of which together shall constitute one and the same instrument.IN WITNESS WHEREOF, the parties have executed this Contract as of the Effective Date.Seller: [Seller Name]By:_____________________________Buyer: [Buyer Name]By:_____________________________Exhibit A - Description of Goods[Description of Goods]This Sales Contract is hereby accepted by the parties hereto as of the Effective Date.[Seller Name]: ___________________________[Buyer Name]: ___________________________篇2Sales ContractThis Sales Contract (the "Contract") is entered into by and between [Seller’s Name], with a registered address at [Seller’s Address] (the "Seller"), and [Buyer’s Name], with a registered address at [Buyer’s Address] (the "Buyer") on this [Date] (the "Effective Date").1. Sale of Goods: The Seller agrees to sell and deliver to the Buyer, and the Buyer agrees to purchase from the Seller, the goods described in Exhibit A (the "Goods") in the quantities and at the prices set forth therein.2. Purchase Price: The purchase price for the Goods shall be [Amount] per unit, for a total purchase price of [Total Amount]. Payment shall be made by the Buyer to the Seller in [Currency] within [Number] days of the date of delivery of the Goods.3. Delivery: The Seller shall deliver the Goods to the Buyer at the place of delivery identified in Exhibit A on the delivery date set forth therein. The Seller shall be responsible for all costs associated with packaging, labeling, and shipping the Goods to the Buyer.4. Inspection and Acceptance: The Buyer shall inspect the Goods upon delivery and shall notify the Seller in writing of any defects or discrepancies within [Number] days of delivery. Failure to provide such notice shall constitute acceptance of the Goods by the Buyer.5. Warranty: The Seller warrants that the Goods shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery. In the event of a breachof this warranty, the Seller shall, at its option, repair or replace the defective Goods at no additional cost to the Buyer.6. Limitation of Liability: In no event shall either party be liable to the other for any indirect, consequential, incidental, special, or punitive damages arising from or related to this Contract, including but not limited to loss of profits or loss of business.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: ______________________ Date: ____________Buyer: ______________________ Date: ____________Exhibit A: Description of Goods[Provide detailed description of the Goods to be sold, including quantity, model numbers, and any other relevant information]This Sales Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior or contemporaneous agreementsor understandings, whether written or oral. This Contract may not be modified except in writing signed by both parties.篇3Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is entered into by and between [Seller's Name], a company organized and existing under the laws of [Seller's Country], with its principal place of business at [Seller's Address] (hereinafter referred to as the "Seller"), and [Buyer's Name], a company organized and existing under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address] (hereinafter referred to as the "Buyer").1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products (the "Products"):- Description of Product 1- Description of Product 2- Description of Product 32. Quantity: The Buyer agrees to purchase [Quantity] units of each Product listed above.3. Price: The total purchase price for the Products shall be [Total Price] USD. The price includes all taxes, duties, and other charges.4. Payment: The payment shall be made in [Currency] within [Number] days of the date of this Contract. The Buyer shall make the payment by [Payment Method].5. Delivery: The Seller shall deliver the Products to the Buyer's address at [Delivery Address] within [Number] days of receiving the payment.6. Inspections and Acceptance: The Buyer shall inspect the Products within [Number] days of delivery. If the Products do not conform to the specifications in this Contract, the Buyer may reject the Products and the Seller shall replace them at no additional cost.7. Warranties: The Seller warrants that the Products are free from defects in materials and workmanship and conform to the specifications in this Contract. The Seller shall remedy any defects in the Products at its own expense.8. Termination: Either party may terminate this Contract by providing [Number] days' written notice to the other party.9. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Seller's Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Name: [Seller's Name]Title: [Seller's Title]Buyer:Name: [Buyer's Name]Title: [Buyer's Title]篇4Sales Contract TemplateThis Sales Contract (the "Contract") is made and entered into as of [Date], by and between [Seller], located at [Seller's Address] (the "Seller"), and [Buyer], located at [Buyer's Address] (the "Buyer").1. Sale of Goods: Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"): [Description of Goods].2. Price: The total purchase price for the Goods will be [Price] USD, payable by Buyer to Seller in the following manner: [Payment Terms].3. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Address] on or before [Delivery Date]. Any additional costs incurred for delivery shall be borne by Buyer.4. Inspection and Acceptance: Buyer shall have [Number of Days] days from the date of delivery to inspect the Goods and notify Seller in writing of any defects or nonconformities. If Buyer fails to give notice within this time frame, the Goods shall be deemed accepted.5. Title and Risk of Loss: Title to the Goods shall pass to Buyer upon delivery. Risk of loss or damage to the Goods shall pass to Buyer upon acceptance.6. Warranties: Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Warranty Period] from the date of delivery. Seller's sole liability under this warranty shall be to repair or replace any defective Goods.7. Limitation of Liability: In no event shall Seller be liable for any consequential, incidental, or special damages arising out ofor in connection with this Contract, even if Seller has been advised of the possibility of such damages.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [State/Country].9. Entire Agreement: This Contract contains the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior and contemporaneous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: ______________________ Buyer: ______________________[Signature] [Signature][Printed Name] [Printed Name][Date] [Date]篇5Sales ContractParties:Seller: [Name of Seller]Address: [Seller’s Address]Phone Number: [Seller’s Phone Number]Email: [Seller’s Email Address]Buyer: [Name of Buyer]Address: [Buyer’s Address]Phone Number: [Buyer’s Phone Number]Email: [Buyer’s Email Address]Date:This sales contract is entered into on [Date].Details of the Sale:The Seller agrees to sell the following goods to the Buyer: - Description of Goods:- Quantity:- Price:- Delivery Date:- Payment Terms:Delivery:The Seller agrees to deliver the goods to the Buyer on or before the agreed-upon delivery date. The Buyer agrees to accept the goods upon delivery.Payment:The Buyer agrees to pay the Seller the agreed-upon price for the goods. Payment shall be made in [Currency] and in [Payment Method].Warranties:The Seller warrants that the goods are of satisfactory quality and fit for the purpose for which they are intended. The Seller also warrants that the goods will be delivered free from any defects.Governing Law:This sales contract shall be governed by the laws of [Country] and any disputes arising from this contract shall be resolved in [City], [Country].Signatures:Seller: ________________________ Date: _____________Buyer: ________________________ Date: _____________This sales contract represents the entire agreement between the Seller and the Buyer and supersedes any previous agreements or arrangements.。

购销英文合同范本三篇

购销英文合同范本三篇篇一Purchase and Sale ContractContract No.: [具体合同编号]Date: [签订日期]Seller (Party A):Name: [卖方公司名称]Address: [卖方地址]Contact Person: [联系人]Telephone: [联系电话]Fax:E: [电子]Buyer (Party B):Name: [买方公司名称]Address: [买方地址]Contact Person: [联系人]Telephone: [联系电话]Fax:E: [电子]Article 1: Commodity and SpecificationsParty A agrees to sell and Party B agrees to purchase the following modity: Commodity Name: [商品名称]Specifications: [具体规格]Quantity: [数量]Article 2: Price and Total AmountThe unit price of the modity is [具体单价] USD.The total amount of this transaction is [总价] USD.Article 3: Payment TermsParty B shall make the payment as follows:1. A deposit of [定金比例]% of the total amount, namely [定金金额] USD, shall be pd within [定金支付期限] days after the signing of this contract.2. The balance shall be pd within [尾款支付期限] days after the delivery of the modity.Article 4: Delivery Time and PlaceThe delivery time is [预计交付日期].The delivery place is [交付地点].Article 5: Quality Assurance and InspectionParty A guarantees that the modity conforms to the agreed specifications and quality standards. Party B has the right to inspect the modity within [检验期限] days after the delivery.Article 6: WarrantyParty A provides a [质保期限] -month warranty for the modity starting from the date of delivery.Article 7: Breach of ContractIf either party fls to fulfill its obligations under this contract, it shall be liable for the breach of contract and pensate the other party for the losses suffered.Article 8: Force MajeureNeither party shall be liable for flure or delay in performance of this contract due to force majeure events, such as natural disasters, wars, etc.Article 9: Dispute ResolutionAny disputes arising from this contract shall be resolved through friendly negotiation. If the negotiation fls, either party may submit the dispute to the arbitration institution for arbitration.Article 10: Other Provisions1. This contract is made in duplicate, with each party holding one copy.2. This contract shall e into effect upon the signature of both parties.Party A (Seal): [卖方盖章]Signature: [卖方代表签字]Party B (Seal): [买方盖章]Signature: [买方代表签字]篇二Purchase and Sale ContractContract No.: [具体合同编号]Date: [签订日期]Buyer (Party A):Name: [买方公司名称]Address: [地址]Contact Person: [联系人]Telephone: [电话]Fax:E:Seller (Party B):Name: [卖方公司名称]Address: [地址]Contact Person: [联系人]Telephone: [电话]Fax:E:Article 1: Commodity and SpecificationsParty A agrees to purchase from Party B, and Party B agrees to sell to Party A the following modity with the specifications as follows:Commodity Name: [商品名称]Specifications: [规格详情]Article 2: Quantity and Price1. Quantity: [具体数量]2. Unit Price: [单价]3. Total Price: [总价]Article 3: Quality and StandardsThe modity shall conform to the quality standards and specifications as mutually agreed upon both parties. Party B guarantees that the modity is free from defects in materials and workmanship.Article 4: Delivery1. Delivery Date: [交货日期]2. Delivery Location: [交货地点]3. Party B shall be responsible for the transportation and bear the related costs.Article 5: Payment Terms1. Party A shall make payment to Party B within [具体天数] days after the receipt of the modity and the invoice.2. Payment Method: [付款方式，如电汇、信用证等]Article 6: Inspection and AcceptanceParty A shall have the right to inspect the modity upon receipt. If any non-conformity is found, Party A shall notify Party B within [具体天数] days.Article 7: WarrantyParty B provides a [具体时长] warranty for the modity. During the warranty period, Party B shall be responsible for repring or replacing the defective modity free of charge.Article 8: Force MajeureNeither party shall be liable for flure or delay in performance of this contract due to force majeure events such as natural disasters, wars, and government actions.Article 9: Dispute ResolutionAny disputes arising from this contract shall be settled through friendly negotiation. If negotiation fls, the dispute shall be submitted to the arbitration institution [具体仲裁机构] for arbitration.Article 10: Other Terms and Conditions1. This contract is made in duplicate, with each party holding one copy.2. This contract shall e into effect upon signature and seal of both parties.Party A (Seal): [买方盖章]Authorized Representative (Signature): [买方代表签字]Party B (Seal): [卖方盖章]Authorized Representative (Signature): [卖方代表签字]篇三Purchase and Sale ContractContract No.: [具体合同编号]Date: [签订日期]Buyer (Party A):Name: [买方公司名称]Address: [买方地址]Contact Person: [联系人]Telephone: [联系电话]Fax:E: [电子]Seller (Party B):Name: [卖方公司名称]Address: [卖方地址]Contact Person: [联系人]Telephone: [联系电话]Fax:E: [电子]Article 1 Commodity and SpecificationsParty A agrees to purchase from Party B, and Party B agrees to sell to Party A the following modity with the specifications and quantities as specified below: Commodity Name: [商品名称]Specifications: [详细规格]Quantity: [数量]Article 2 Price and Total AmountThe unit price of the modity is [具体单价] USD. The total amount of this contract is [总价] USD.Article 3 Payment Terms1. Party A shall make a deposit of [定金比例]% of the total amount within [规定日期] days after the signing of this contract.2. The balance payment shall be made within [规定日期] days after Party A receives the goods and checks them to be in conformity with the contract.Article 4 Delivery Time and Place1. Party B shall deliver the goods to the designated place within [交货日期] days after receiving the deposit.2. The delivery place is [具体交货地点].Article 5 Quality AssuranceParty B guarantees that the goods provided conform to the quality standards and specifications stipulated in this contract. During the warranty period, if there are any quality problems, Party B shall be responsible for repr or replacement.Article 6 Inspection and AcceptanceParty A shall inspect the goods within [验收日期] days after receiving them. If there are any objections, Party A shall notify Party B in writing within this period.Article 7 Force MajeureIf either party is unable to perform this contract due to force majeure events such as natural disasters, wars, etc., the affected party shall notify the other party in a timely manner and provide relevant evidence. The performance of the contract shall be postponed or cancelled depending on the circumstances.Article 8 Dispute ResolutionAny disputes arising from the execution of this contract shall be settled through friendly negotiation. If the negotiation fls, either party may file a lawsuit in the court of petent jurisdiction.Article 9 Contract ValidityThis contract shall e into effect upon signature and seal both parties and shall remn valid until the pletion of all obligations.Party A (Buyer): [盖章]Signature: [签字]Date: [日期]Party B (Seller): [盖章]Signature: [签字]Date: [日期]Please note that the above is a basic template and you should modify and adjust it according to the specific circumstances and requirements of your transaction. It is remended to consult a professional lawyer before signing any legally binding contract.。

英文版销售合同范本8篇

英文版销售合同范本8篇篇1SALES CONTRACTThis Sales Contract is made on [Date], between [Seller Name], a company duly organized and operating under the laws of [Seller Country], hereinafter referred to as "Seller" and [Buyer Name], a company duly organized and operating under the laws of [Buyer Country], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, attached hereto, which shall be a part of this Contract. The specifications, quality, quantity, and other related details of the products are specified in Annex A.2. Price and Payment2.1 The total price for the products listed in Annex A shall be [Total Price] USD, which shall be paid by the Buyer to the Seller.2.2 Payment shall be made in USD via the method agreed by both parties, either wire transfer or other agreed means.2.3 The Buyer shall make the payment within [Payment Days] days from the date of signing this Contract.3. Delivery and Shipping3.1 The Seller shall deliver the products to the shipping port specified by the Buyer within [Delivery Days] days from the date of signing this Contract.3.2 Shipping costs shall be borne by the Buyer unless otherwise agreed by both parties.4. Quality AssuranceThe Seller guarantees that all products are in conformity with the specifications mentioned in Annex A and comply with international quality standards. The Seller shall provide necessary quality documents and certificates to the Buyer upon request.5. Warranty and售后支持The Seller shall provide a warranty period of [Warranty Period] months from the date of delivery for any defects in material or workmanship found in the products. During this period, the Seller shall replace or repair any defective products atits own cost. After the warranty period, the Seller shall provide technical support and maintenance services upon request.6. Contract Modification and Termination6.1 This Contract may be modified only by a written agreement signed by both parties.6.2 In case of any breach of Contract by either party, the other party may terminate this Contract with immediate effect upon notice to the default party.7. Law and JurisdictionThis Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to the courts located in [Country/City].8. Miscellaneous8.1 All communications and notices related to this Contract shall be made in English.8.2 This Contract constitutes the entire understanding between the Seller and the Buyer, and no modification oramendment shall be made to this Contract except in writing and signed by both parties.8.3 This Contract is in duplicate, with each party holding one original copy. Each copy is equally valid and shall be binding on both parties.In conclusion, upon signing this Contract, both parties agree to its terms and conditions, and are fully bound by its provisions.Seller:Name: ________________________Address: ________________________Date: ________________Signature: ________________________Buyer:Name: ________________________Address: ________________________Date: ________________Signature: ________________________ANNEX A - PRODUCT LIST AND SPECIFICATIONS (To be attached separately)Please note that this Sales Contract template is for reference purposes only and may need to be customized based on specific business requirements and legal considerations. It is advisable to have a professional legal advisor review any contract before its execution.篇2Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").Preamble:The Seller and the Buyer, through mutual understanding and negotiation, agree to conclude this contract for the sale ofproducts mentioned below. Both parties have verified the authenticity, legality, and conformity of the products, terms, conditions, and documents attached to this contract.Article 1: Contract Scope1.1 The Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, which forms an integral part of this contract.1.2 The items, specifications, quantity, and unit prices of the products shall be as stated in Annex A.Article 2: Terms of Payment2.1 The payment terms shall be as agreed upon by both parties and stated in Annex B, which forms an integral part of this contract.2.2 Any changes to the payment terms must be agreed upon by both parties in writing.Article 3: Delivery and Inspection3.1 The Seller shall ensure timely delivery of the products in accordance with the terms agreed upon by both parties.3.2 The Buyer shall inspect the products immediately upon receipt and notify the Seller of any discrepancies within a reasonable period of time.Article 4: Warranty and Liability4.1 The Seller guarantees that the products are free from defects in material and workmanship and conform to the specifications mentioned in Annex A.4.2 If any defect is found in the products, the Seller shall, at its option, replace or repair them, free of charge, without any delay.Article 5: Force Majeure5.1 If either party is prevented from fulfilling its contractual obligations due to force majeure events, it shall notify the other party immediately and provide necessary evidence.5.2 The affected party shall strive to overcome the force majeure situation and resume performance as soon as possible.Article 6: Termination6.1 This contract shall be terminated only by mutual agreement in writing or in accordance with the applicable laws.6.2 In case of breach of any term of this contract by either party, the other party may terminate this contract by giving a written notice to that effect.Article 7: Miscellanea7.1 This contract constitutes the entire agreement between the Seller and the Buyer and no modification shall be made except in writing and signed by both parties.7.2 This contract is made in duplicate, one for each party, with equal legal effect.7.3 Any disputes arising out of or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its rules.7.4 This contract is governed by the laws of [Applicable Country].篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and the Buyer hereby agree to the terms and conditions stated below.Article 2: Product Description2.1 The Product to be sold is described in detail in Annex A, including its specifications, quality standards, and packaging requirements.Article 3: Price and Payment3.1 The price of the Product shall be as stated in Annex B. The Price includes all costs associated with the Product, including taxes, duties, and other applicable charges.3.2 Payment shall be made in full upon receipt of the Product, through the means specified in Annex C.Article 4: Delivery4.1 Delivery shall be made within the timeframe specified in Annex D.4.2 The Seller shall ensure that the Product is properly packaged and labeled for safe transportation to the Buyer.Article 5: Quality Assurance5.1 The Seller shall ensure that the Product meets the specifications and quality standards set out in Annex A.5.2 If the Buyer finds any defects in the Product, the Seller shall promptly replace or repair the Product, at no additional cost to the Buyer.Article 6: Warranty and Liabilities6.1 The Seller provides a warranty for the Product as specified in Annex E.6.2 In case of any claim by the Buyer related to the Product, the Seller shall be liable for any losses incurred by the Buyer, up to the value of the Product.Article 7: Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, wars, riots, or government actions, provided that such party promptly notifies the other party of such events.Article 8: Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party of its contractual obligations, provided that such breach is not cured within a reasonable period of time.Article 9: Dispute Resolution9.1 Any disputes arising out of or in connection with this Contract shall be resolved through友好协商(amicable negotiation). If no settlement can be reached, either party may submit the dispute to [arbitration institution or court] for resolution.篇4Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Scope of Contract(a) The Seller agrees to sell and the Buyer agrees to purchase the under mentioned goods/products, details of which are given in the Annexure A attached hereto and made a part of this Contract.(b) The quantity, quality, specifications, packing, and other relevant terms of the goods/products to be sold shall be clearly stated in Annexure A. The Seller guarantees the accuracy of the same.2. Price and Payment Terms(a) The total contract price for the goods/products mentioned in Annexure A shall be [Contract Price]. The prices are fixed and firm.(b) Payment terms: The Buyer shall make payment through [Payment Method] to the Seller's account within [Payment Timeframe] after the date of this Contract.3. Delivery and Shipping(a) The Seller shall arrange for delivery of thegoods/products to the port specified by the Buyer within [Delivery Timeframe].(b) Shipping documents shall be issued by the Seller and delivered to the Buyer in a timely manner to ensure smooth shipping.4. Quality Assurance and Inspection(a) The Seller guarantees that the goods/products shall be new and of the quality and specifications stipulated in Annexure A.(b) The Buyer has the right to conduct inspections during production and upon receipt of the goods/products to ensure conformity with the contract specifications.5. Risk and Ownership TransferRisk of loss or damage to the goods/products passes to the Buyer upon delivery to the port specified by the Buyer. Ownership of the goods/products shall transfer to the Buyer upon full payment by the Buyer.6. Force MajeureIn case of any delay or failure in performance due to causes beyond the control of either party, such as war, riots, natural disasters, or government intervention, the affected party shall immediately notify the other party in writing. The affected partyshall use reasonable efforts to mitigate the consequences of such force majeure event.7. Warranty and Claims(a) The Seller shall be responsible for any defects in material or workmanship in the goods/products for a period of [Warranty Period] from the date of delivery to the Buyer. During this period, any defects shall be rectified by the Seller at its cost.(b) If any claims are to be made by the Buyer, they must be submitted in writing within [Claim Period] of receipt of the goods/products. Failure to do so shall render claims invalid.8. ConfidentialityBoth parties shall maintain confidentiality of all information related to this contract that is not intended for public disclosure.9. TerminationThis Contract may be terminated by either party in case of a breach by the other party that is not cured within a reasonable period of time. Termination shall be effected by written notice to the other party.10. General Terms(a) This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed to by both parties in writing.(b) Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit such disputes to [Dispute Resolution Agency] for arbitration.(c) This Contract shall be governed by and construed in accordance with the laws of [Applicable Law Jurisdiction].(d) This Contract is made in [Number of Languages] originals, each being equally authentic.(e) This Contract becomes effective as of the date stated at the beginning of this Contract and shall continue in full force and effect for a period of [Contract Duration].The parties have signed this Contract in [Signature Place] on the date stated at the beginning of this Contract.Seller:Name:Title:Date:Signature:Buyer:Name:Title:Date:Signature:ANNEXURE A - PRODUCTS AND SPECIFICATIONS [Please insert detailed list of products, specifications, quantity, quality, etc.] [This space left intentionally blank.] [Insert additional annexes if necessary.] [Insert company logos or other identifying marks if desired.]篇5Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Full Name] (hereinafter referred to as "Seller"), and [Buyer's Full Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, including product name, quantity, specifications, and any other relevant details].Article 2: Price and PaymentThe total price for the goods shall be [Total Price in figures and currency]. Payment shall be made through [Payment method/s (e.g., wire transfer, credit card, etc.)]. The Buyer shall make the payment within [Time frame for payment (e.g., 30 days from date of signing this contract)].Article 3: DeliveryThe Seller shall deliver the goods to the Buyer at the following address: [Buyer's shipping address]. The delivery shall be completed within [Time frame for delivery].Article 4: Quality and InspectionThe Seller guarantees that the goods shall be of good quality and shall comply with the specifications mentioned in Article 1.The Buyer shall have the right to inspect the goods upon receipt. If any defects are found, the Buyer shall notify the Seller immediately.Article 5: Warranty and售后支持The Seller shall provide a warranty for the goods as follows: [Details of warranty period, terms and conditions]. The Seller shall also provide necessary after-sales support to the Buyer as needed.Article 6: Risks and LiabilityRisk of loss or damage to the goods shall pass to the Buyer upon delivery. The Seller shall be liable for any damage to the goods caused during transportation. However, if the damage is caused due to force majeure events (e.g., natural disasters), then the Seller shall not be liable.Article 7: TerminationThis Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide a written notice to the other party specifying the reasons for termination.Article 8: Disputes and GrievancesAny disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between the parties. If no settlement is reached, the dispute shall be referred to [Mediation/Arbitration institution or court of law].Article 9: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events (e.g., natural disasters, wars, riots, etc.). The affected party shall provide timely notice to the other party regarding such events.Article 10: General TermsThis Contract constitutes the entire agreement between the parties and no modifications shall be made except by written agreement signed by both parties. This Contract is governed by the laws of [Country/State]. The original Contract in English shall be equally valid as any translated version. Any notices required under this Contract shall be in writing and sent to the addresses specified by the parties.In witness whereof, the parties have signed this Contract in duplicate, each party retaining one copy.Seller: _________________________ (Signature)Date: _________________________ (Date)Buyer: _________________________ (Signature)Date: _________________________ (Date)(Note: This is a template and should be customized according to specific requirements and circumstances.)篇6Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into by and between [Buyer Name], whose registered office is located at [Buyer Address] (hereinafter referred to as the "Buyer"), and [Seller Name], whose registered office is located at [Seller Address] (hereinafter referred to as the "Seller").Preamble:After friendly negotiation and mutual understanding of the terms and conditions, the Buyer agrees to purchase from the Seller, and the Seller agrees to sell to the Buyer, the products specified in this Contract.Article 1: Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the under-mentioned commodity:[Product Description, Quantity, Quality, Specifications, Packaging, etc.]Article 2: Price and Payment2.1 The total contract price for the goods mentioned in Article 1 shall be [Price Amount].2.2 Payment shall be made by [Payment Method] through [Bank Name] within [Days/Weeks/Months] after the date of this Contract.Article 3: Delivery and Shipment3.1 The Seller shall deliver the goods within [Delivery Period] after receiving the order confirmation from the Buyer.3.2 The Seller shall inform the Buyer of the estimated date of shipment in good time before the shipment. The Seller shall ensure that the goods are shipped within the time as stipulated in this Contract. In case of force majeure, the Seller shall immediately notify the Buyer in writing of any delay in delivery.Article 4: Quality Inspection and Warranty4.1 The Seller shall ensure that all goods are of the quality, specifications and quantity agreed in this Contract. Any discrepancies must be promptly reported to the Buyer in writing.4.2 The Seller guarantees that the goods are free from any defects in material and workmanship for a period of [Warranty Period] from the date of arrival at the port of destination specified in this Contract. During this period, the Seller shall make up any defects in quality or quantity free of charge.Article 5: Risk and Insurance5.1 Risk of loss or damage to the goods passes to the Buyer upon delivery on board the vessel at the port of shipment specified in this Contract. Prior to that point, all risks shall be borne by the Seller.此外，合同还考虑了可能出现的法律争议问题，并为此制定了相应的解决方案。

英文版销售合同样本5篇

英文版销售合同样本5篇篇1Sales ContractThis Sales Contract is made and entered into on this____(date)_______ by and between:Seller: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Seller”.Buyer: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Buyer”.1. Product Description: The Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following products: ____(description of products)_______.2. Quantity: The Buyer agrees to purchase____(quantity)_______ units of the above-mentioned products.3. Price: The price of the products shall be ____(price)_______ per unit. The total purchase price shall be ____(total price)_______. Payment shall be made in ____(currency)_______. The payment shall be made as follows: ____(payment terms)_______.4. Delivery: The Seller shall deliver the products to the Buyer at the address specified by the Buyer on ____(deliverydate)_______.5. Inspection and Acceptance: The Buyer shall have____(number of days)_______ days from the date of delivery to inspect the products and notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within the specified time frame, the products shall be deemed accepted.6. Warranty: The Seller warrants that the products are free from defects in material and workmanship. If any defects are found within ____(warranty period)_______ days from the date of delivery, the Seller shall replace the defective products at no additional cost to the Buyer.7. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of the state of____(state)_____.8. Entire Agreement: This Sales Contract constitutes the entire agreement between the Seller and the Buyer with respect to the purchase and sale of the products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Seller and the Buyer have executed this Sales Contract as of the date first above written.Seller: __________________ Buyer:___________________________________________________________(Date)(Date)篇2Sales ContractThis Sales Contract (“Contract”) is entered into on [Date] (“Effective Date”) by and between [Seller Name], with an address at [Seller Address] (“Seller”) and [Buyer Name], with an address at [Buyer Address] (“Buyer”).1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods: [Description of Goods], in the quantity of [Quantity] at the price of [Price] per unit.2. Payment Terms: The total purchase price for the goods shall be paid as follows: [Payment Terms]. Buyer shall makepayment in the currency of [Currency] to the bank account of Seller no later than [Due Date].3. Delivery: The goods shall be delivered to Buyer’s address at [Delivery Address] by [Delivery Method] no later than [Delivery Date]. The risk of loss or damage to the goods shall pass to Buyer upon delivery.4. Inspection: Buyer shall have the right to inspect the goods within [Inspection Period] days from the delivery date. If Buyer finds the goods to be non-conforming or defective, Buyer shall notify Seller in writing within the Inspection Period.5. Warranties: Seller warrants that the goods shall be free from defects in material and workmanship and shall conform to the specifications agreed upon by the parties. The warranty period shall be [Warranty Period] from the delivery date.6. Limitation of Liability: In no event shall Seller be liable for any indirect, incidental, special, or consequential damages arising out of or related to this Contract. Seller’s total liability shall not exceed the total purchase price paid by Buyer under this Contract.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [State], without regard to its conflict of law principles.8. Entire Agreement: This Contract constitutes the entire agreement between the parties concerning the sale of goods and supersedes all previous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: ____________________________ Buyer:____________________________篇3Sales ContractThis Sales Contract ("Contract") is entered into by and between [Seller's Name], with a principal place of business at [Seller's Address] ("Seller"), and [Buyer's Name], with a principal place of business at [Buyer's Address] ("Buyer"), collectively referred to as the "Parties," on this [Date].1. Sale of Goods: Seller agrees to sell and deliver to Buyer, and Buyer agrees to purchase and accept delivery of the goodsdescribed in Exhibit A (the "Goods") in accordance with the terms and conditions of this Contract.2. Purchase Price: The Purchase Price for the Goods shall be [Amount] per [Unit], for a total purchase price of [Total Amount]. Buyer shall make payment of the Purchase Price in the manner set forth in Exhibit B.3. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Location] on or before the Delivery Date set forth in Exhibit A. Buyer shall be responsible for all costs associated with the delivery of the Goods.4. Inspection and Acceptance: Buyer shall have [Number] days from the Delivery Date to inspect the Goods and notify Seller in writing of any defects or non-conformities. Buyer shall be deemed to have accepted the Goods unless Seller receives written notice of rejection within the specified period.5. Warranties: Seller warrants that the Goods conform to the specifications set forth in Exhibit A and are free from defects in material and workmanship.6. Limitation of Liability: In no event shall either Party be liable for any consequential, incidental, special, or indirectdamages, including without limitation, loss of profits, loss of business or loss of goodwill.7. Miscellaneous:7.1 This Contract contains the entire agreement between the Parties and supersedes any prior agreements or understandings, whether written or oral.7.2 This Contract shall be governed by the laws of [Jurisdiction], and any disputes arising under this Contract shall be resolved through arbitration in [Arbitration Venue].IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first written above.Seller:____________________________[Signature][Printed Name][Title]Buyer:____________________________[Signature][Printed Name][Title]篇4Sales ContractThis Sales Contract (the "Contract") is made and entered into as of [Date] (the "Effective Date") by and between [Seller], with a registered address at [Address] (the "Seller"), and [Buyer], with a registered address at [Address] (the "Buyer").1. Description of GoodsThe Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following goods (the "Goods"):- Description of goods- Quantity- Price2. PriceThe total price for the Goods shall be [Total Price], which shall be paid by the Buyer to the Seller in [Currency] upon execution of this Contract.3. DeliveryThe Seller shall deliver the Goods to the Buyer at [Delivery Location] on or before [Delivery Date]. The Buyer shall bear all costs associated with the delivery of the Goods.4. Inspection and AcceptanceThe Buyer shall have [Number] days from the date of delivery to inspect the Goods and notify the Seller of any defects or nonconformities. If no notice is given within the specified time period, the Goods shall be deemed accepted by the Buyer.5. WarrantiesThe Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Number] days from the date of delivery. The Seller's sole liability under this warranty shall be to repair or replace any defective Goods.6. Limitation of LiabilityIn no event shall either party be liable for any indirect, consequential, incidental or special damages arising out of or inconnection with this Contract, even if such party has been advised of the possibility of such damages.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller:[Signature][Name][Title][Date]Buyer:[Signature][Name][Title][Date]篇5Sales ContractThis Sales Contract (the "Contract") is made and entered into this ___ day of ____, 20___, by and between [Seller], with a business address at [Seller's address] (the "Seller"), and [Buyer], with a business address at [Buyer's address] (the "Buyer").RECITALS1. The Seller is in the business of selling [description of goods or services].2. The Buyer wishes to purchase [description of goods or services] from the Seller.3. The Seller and the Buyer desire to set forth the terms and conditions of the sale of the goods or services as detailed below.AGREEMENT1. Sale of Goods/Services. The Seller agrees to sell and the Buyer agrees to purchase [description of goods or services] according to the terms and conditions set forth in this Contract.2. Price. The purchase price for the goods or services shall be ___ US Dollars ($__) per unit, for a total purchase price of ___ US Dollars ($__). Payment shall be made in the following manner: [payment terms, such as upfront payment, installment payments, etc.].3. Delivery. The Seller shall deliver the goods or perform the services to the Buyer at [delivery location] on or before [delivery date]. The Buyer shall be responsible for any shipping or delivery fees incurred.4. Inspection Period. The Buyer shall have a period of ___ days after delivery to inspect the goods or services and to notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within said period, the goods or services shall be deemed accepted by the Buyer.5. Warranties. The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of ___ months from the date of delivery. The Seller also warrants that the services shall be performed in a professional and workmanlike manner.6. Indemnification. The Seller agrees to indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising from any defects or nonconformities in the goods or services.7. Governing Law. This Contract shall be governed by the laws of the State of [State], without regard to its conflict of law principles.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: _____________________ Buyer:_____________________[Name and Title][Name and Title][Company Name][Company Name][Date][Date]。

英文购销合同_中英文对照购销合同范本

英文购销合同_中英文对照购销合同范本英文购销合同_中英文对照购销合同范本(一)Buyer: 买方：Add.: 地址：Seller: 卖方：Add.: 地址：This purchase contract (hereafter abbreviated “contract”) is signed by andbetween the Buyer and the Seller upon equal negotiations based on the ContractLaw of P..R .China and other relevant laws and regulations.. Both parties agreeto sell and buy goods on following terms and conditions.此销售合同(以下简称“合同”)根据>及相关法律法规并经由买卖双方经平等协商后共同签定，买方与卖方均同意以下条款和条件购买和出售货物。

1. COMMODITY NAME品名：Work glves 劳保手套SPECIFICATION AND PRICE 规格与价格：Grey cow split leather .The leather palm is to measure 205 mm from the tipof the middle finger to the wrist and 125 mm hand wide.灰色牛革质料。

皮革掌面从手指到腕部205毫米，掌宽125毫米。

PRICE OF PAIR: 价格：每双：6元人民币QUANTITY: 4000 pair 数量：4000双TOTAL AMOUNT: 总价：2. Delivery: 交货方式：Description, quantity, unit price, total amountand other details of thegoods ordered please refer to detail order, invoice and packing list. The nameof the issuing company of invoice must be the same as the seller.采购品名、规格、数量、单价、总价、交期等参考每次采购相应订单、发票及装运单，发票的填开单位必须与本合同中卖方的名称相一致。

英文购销合同范本8篇

英文购销合同范本8篇篇1PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer, both parties having fully expressed their mutual wishes and intentions, and upon the basis of equality and mutual benefit, and in accordance with the principles of honesty and credit, stipulate the following terms and conditions:Seller: _________________ (hereinafter referred to as "the Seller")Buyer: _________________ (hereinafter referred to as "the Buyer")I. SUBJECT OF CONTRACT:This Contract shall cover the sale by the Seller to the Buyer of ___________ (Product Name), as detailed in Article II below.II. PRODUCTS AND QUANTITY:The Seller agrees to sell to the Buyer the products listed in Annex I in the quantity specified. The specifications, quantity, quality and packaging standards shall be in accordance with the confirmed Purchase Order and Quality Requirements agreed by both parties.III. PRICE AND PAYMENT:The total contract value shall be fixed at ________ (Currency and Amount) for the products listed in Annex I. The Buyer shall make payment in full via ________, with details of payment to be agreed upon by both parties.IV. DELIVERY AND COMPLETION OF DELIVERY:The Seller shall complete delivery of all products listed in Annex I within ________ (Time Limit). Any delay in delivery shall be notified to the Buyer in writing promptly upon occurrence.V. QUALITY AND GUARANTEE:The Seller guarantees that all products shall be of the quality specified in the confirmed Purchase Order and Quality Requirements and be free from defects or deficiencies of material or workmanship upon delivery to the Buyer at the port of destination.VI. INSPECTION AND ACCEPTANCE:VII. FORCE MAJEURE:Neither party shall be held responsible for any failure or delay in performance due to Force Majeure circumstances, such as natural disasters, government orders, wars or any other reasons beyond their control. However, both parties should make every effort to mitigate losses caused by Force Majeure circumstances.VIII. BREACH OF CONTRACT:If any party fails to perform its contractual obligations, the other party shall be entitled to claim compensation for losses incurred due to such breach of contract. If such breach of contract is attributable to gross negligence or willful misconduct, the injured party may claim compensation for losses beyond those stipulated in this Contract.IX. CONFIDENTIALITY:Both parties shall keep confidential all information related to this Contract which is not intended for public disclosure, including but not limited to product specifications, pricing, business plans and other confidential information. Neither partyshall disclose any confidential information to any third party without prior written consent of the other party.X. SETTLEMENT OF DISPUTES:篇2PURCHASE AND SALE CONTRACT甲方（买方）：__________________乙方（卖方）：__________________根据平等互利、协商一致的原则，甲乙双方就以下商品的购销事宜达成如下协议：一、商品名称及规格The name and specifications of the commodity:______________ （商品名称及规格）二、数量与计量单位Quantity and unit of measurement: ________________ （商品数量与计量单位）三、质量标准和保证期Quality standard and guarantee period: ________________ （商品质量标准和保证期）四、价格及付款方式Price and payment terms:1. 商品价格：____________________ （商品价格）2. 付款方式：____________________ （付款方式）3. 发票：发票应根据实际交易金额开具，并在货物交付后一定时间内寄送给买方。

销售合同英文范本8篇

销售合同英文范本8篇篇1SALES CONTRACTThis Sales Contract is made by and between the following two parties:Party A: [Name of Seller]Party B: [Name of Buyer]1. Scope of Contract:This Contract stipulates the terms and conditions for the sale and purchase of the following products: [Product Description, Quantity, Quality, Specifications, etc.] (hereinafter referred to as "Products"). The parties agree to strictly adhere to the terms and conditions set out below.2. Product Description:[Description of the product to be sold, including specifications, quality standards, quantity, etc.]3. Price and Payment:3.1 The total price for the Products shall be [Price in agreed currency].3.2 Payment terms: [Specify payment terms such as T/T in advance, L/C, D/P, etc.]3.3 Any changes to the price or payment terms must be mutually agreed upon in writing.4. Delivery and Shipment:4.1 Delivery Date: [Specify delivery date].4.2 Delivery Location: [Specify delivery location].4.3 Shipping Documents: [Specify required shipping documents].4.4 Risks and responsibilities for the Products shall pass to Party B upon delivery. Any delay in delivery shall be mutually discussed and resolved in writing.5. Quality and Inspection:5.1 Party A shall ensure that the Products comply with the agreed quality standards.5.2 Party B shall have the right to inspect the Products before delivery to ensure quality compliance.5.3 If any defects are found during inspection, Party A shall be responsible for rectifying or replacing the Products as per the agreed terms.6. Force Majeure:In case of any force majeure events such as natural disasters, war, strikes, government policies, etc., which hinder the performance of this Contract, the affected party shall notify the other party in writing within a reasonable period of time and take measures to mitigate the effects of such events. The period of performance may be extended accordingly.7. Warranty:Party A shall provide a warranty for the Products as per the terms and conditions agreed upon by both parties. Any defects in the Products shall be rectified or replaced as per the warranty terms.8. Confidentiality:Both parties shall maintain confidentiality of all information related to this Contract and its execution, except for anyinformation that is in the public domain or required to be disclosed by law or regulatory authorities.9. Dispute Resolution:Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such disputes shall be submitted to [specify arbitration institution or court] for arbitration/settlement in accordance with [specify applicable laws]. The arbitration award shall be final and binding on both parties.10. Termination:This Contract may be terminated by either party in the event of a breach by the other party which is not rectified within a reasonable period of time. Termination shall be notified to the other party in writing with reasonable grounds for termination stated. The provisions of this Contract which by their nature would survive termination shall remain in full force and effect after termination.篇2SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:whereby both parties agree as follows:1. Scope of Contract(1) The Buyer agrees to purchase the goods listed in Annex I to this Contract from the Seller, and the Seller agrees to sell and deliver the goods to the Buyer on the terms and conditions stipulated below.(2) The total contract value is specified in Annex I.2. Delivery(1) The Seller shall deliver the goods to the port specified in Annex I with all necessary documents in strict accordance with the terms of this Contract.(2) Delivery dates and documents must be issued timely according to the agreed terms of delivery and be clearly indicated on all shipping documents or notice of shipment effected to the Buyers. Otherwise, any losses incurred to theBuyers attributable to delayed shipment or inability to present a satisfactory document will be borne by the Seller in full.(3) The Seller should immediately notify the Buyers byFax/Mail once ship loading of the goods commences and also inform the Buyers of the Contract No., name of vessel, date of shipment, quantity loaded and such other relevant information as regards loading of the goods.3. Terms of PaymentPayment shall be made by irrevocable sight L/C within XX days after receipt of the first shipping advice FAX together with copy of shipping documents through Bank of XXXX Banker to the Seller.4. Quality & Inspection(1) The Seller shall guarantee that all goods shall be of best quality and be promptly fit for ordinary purpose or intended use. If they fail to meet relevant specifications stipulated in this Contract within XX months from their arrival at destination port after unloading from vessel and such failure are due to poor quality, the Seller shall replace them free of charge or compensate for any loss sustained by the Buyers in accordance with the contract price.(2) The quality and quantity of the goods shall be examined by the Inspection Company at the port of destination. If any claim is filed by the Buyers against such Inspection Company’s Inspection Certificate, which is mutually acceptable, within XX days after arrival of goods at port of destination, the Seller shall be responsible for any loss attributable to its poor quality or short weight.5. ClaimsThe Seller shall be responsible for any damage or loss attributable to its poor quality or short weight if claims are made by the Buyers against Inspection Certificate issued by Inspection Company appointed by the Buyers in writing within XX days after arrival of goods at port of destination and confirmed by Inspection Company appointed by both parties jointly before settlement of claims between parties are reached.6. Force MajeureIn case Force Majeure circumstances last for more than XX days, both parties shall negotiate a settlement solution on mutually beneficial basis through friendly discussion.In case Force Majeure circumstances occur during performance of this Contract, both parties should strive forsettlement through friendly discussion in order to minimize losses incurred thereby and continue performance under this Contract after removal of such Force Majeure circumstances as soon as possible.篇3SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Name: __________________________________Address: __________________________________Country/Region: _____________________________Seller:Name: __________________________________Address: __________________________________Country/Region: _____________________________I. Contract ObjectThe Seller agrees to sell and the Buyer agrees to purchase the following products: (Here insert a detailed list of products, including product name, specifications, quantity, unit price, total value, etc.)II. Terms of DeliveryThe products shall be delivered FOB (Free On Board) _______ (Port of Shipment) on or before the date _______ (Time of Delivery). The Seller shall inform the Buyer of the expected date of dispatch at least 15 days prior to the date of delivery.III. Terms of PaymentPayment shall be made by irrevocable Letter of Credit (L/C) payable at sight. The L/C shall be issued by the Buyer's bank in favor of the Seller's bank and shall be valid for 30 days after the date of shipment as stipulated in this Contract.IV. Quality and InspectionThe products shall be in accordance with the quality standards specified in this Contract. The Seller shall provide a quality certificate as evidence of the quality of the products. The products shall be inspected by a third-party inspection agency mutually agreed upon by the Buyer and the Seller before shipment. If any disputes arise over the quality of the products,the third-party inspection agency's report shall be the basis for settlement.V. Claims and PenaltyIn case of claims due to late delivery or poor quality of the products, the Buyer shall notify the Seller immediately upon arrival of the products at the port of destination. The Seller shall be responsible for any claims that are proved to be valid after investigation. If late delivery exceeds 15 days, the Seller agrees to pay a penalty equal to 1% of the total value of the products for each week of delay. However, such penalty shall not exceed a total of 5% of the total contract value.VI. Force MajeureNeither party shall be liable for any failure to perform its obligations under this Contract due to force majeure events such as natural disasters, wars, riots, etc., which are beyond its control. If such events continue for more than six months, this Contract may be terminated by mutual agreement of both parties without any liability on either side.VII. Settlement of DisputesVIII. General ProvisionsThe Buyer hereby confirms that they have read and fully understand all terms and conditions stated in this Contract and agree to abide by them. The Seller confirms that they are willing to sell the products specified in this Contract on the terms and conditions stated herein.Buyer: ________________________________ (Signature)Date: ________________ (Date of Signing)Seller: ________________________________ (Signature)Date: ________________ (Date of Signing)Note: This contract is only a sample and should be customized according to specific needs and circumstances before use. It is recommended to have legal counsel review any contract before execution.篇4SALES CONTRACT销售合同This Sales Contract is made by and between [买方名称], hereinafter referred to as "Buyer" and [卖方名称], hereinafter referred to as "Seller," whereby the Buyer agrees to purchasefrom the Seller and the Seller agrees to sell to the Buyer the under mentioned commodity subject to the terms and conditions stipulated below:兹有买方[买方名称]与卖方[卖方名称]（以下简称“卖方”）订立本合同，买方同意向卖方购买，卖方同意出售以下列条款规定的商品：Article 1: Commodity商品The commodity to be delivered under this Contract shall be as follows: [商品名称、规格、数量及价格等详细信息]。

英文购销合同范本6篇

英文购销合同范本6篇篇1PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: _________________ (Name of the Buyer)Seller: _________________ (Name of the Seller)I. Contracting PartiesThe contracting parties agree as follows:II. Products and SpecificationsThe products to be purchased and sold under this Contract are as follows: ______________ (Please specify the products, specifications, quantity, unit price, total value, etc.)III. Terms of DeliveryThe Seller shall deliver the products to the port/place specified below: ______________ (Delivery location). The mode of transportation, the date of shipment, and the port/place of receipt shall be agreed upon by both parties.IV. Terms of PaymentThe payment terms under this Contract shall be as follows: ______________ (Payment terms such as advance payment, terms of payment, documents required for payment, etc.).V. Quality Inspection and Warranty PeriodThe Seller shall ensure that the products are in conformity with the quality standards specified in this Contract. The warranty period shall be _______________ (Warranty period). During the warranty period, if any defects are found in the products, the Seller shall be responsible for repairing or replacing them at its own cost.VI. Risks and Penalties for Late Delivery or Non-DeliveryIf the Seller fails to make delivery of the products on time or delivers wrong specifications, it shall be responsible for any loss incurred to the Buyer. If the Seller cannot make delivery due to force majeure circumstances, it shall immediately notify the Buyer in writing and take proper measures to minimize the lossof both parties. The risks and penalties for late delivery ornon-delivery shall be agreed upon by both parties.VII. Confidentiality and Intellectual Property RightsVIII. Settlement of DisputesIX. General Clauses1) Force Majeure: Neither party shall be held responsible for failure or delay in performance of its obligations under this Contract due to force majeure causes such as natural disasters, government intervention or other unforeseeable circumstances beyond its control. If such circumstances occur, both parties shall endeavor to resume performance under this Contract as soon as possible after removal of such causes or upon receipt of advice from each other through diplomatic channels.篇2PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: ________________ (Name of Buyer)Seller: ________________ (Name of Seller)WHEREAS the Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity according to the terms and conditions stipulated below:I. Commodities: ________________ (The specific commodity or products to be purchased and sold, including name, specifications, quantity, etc.)II. Price: ________________ (The agreed price for the commodity, including total price, unit price, currency, payment terms, etc.)III. Quality and Quantity: ________________ (The quality standards, inspection methods, and any applicable tolerance levels for the commodity. The quantity to be delivered by the Seller and accepted by the Buyer.)IV. Delivery:a. Place of Delivery: ________________ (The place where the commodity shall be delivered.)b. Time of Delivery: ________________ (The date or period in which the delivery should be completed.)c. Risks and Expenses: ________________ (The risks and expenses related to delivery such as transportation, insurance, customs clearance, etc.)d. Delay in Delivery: Penalty for delay in delivery if any shall be as per the agreed terms.e. Any other specific conditions related to delivery.V. Payment:a. Terms of Payment: ________________ (The payment terms agreed upon by both parties, such as advance payment, payment on delivery, payment terms in letters of credit, etc.)b. Time of Payment: ________________ (The date or period in which the payment should be made.)c. Late Payment Penalty: Penalty for late payment if any shall be as per the agreed terms.d. Any other specific conditions related to payment.VI. Inspection and Acceptance: ________________ (The inspection procedures, acceptance criteria, and any other related conditions for the commodity.)VII. Claims: ________________ (The procedures and conditions for claims in case of damage or loss of the commodity during transportation or other relevant matters.)VIII. Force Majeure: Both parties shall be entitled to claim compensation for any losses incurred due to force majeure events such as natural disasters, wars, riots, etc., which are beyond their control. The responsibilities of both parties shall be suspended during such events.IX. Confidentiality: Both parties shall keep confidential all information related to this Contract that is not meant for public disclosure unless mutually agreed or required by law.X. Warranty and Guarantee: The Seller shall provide warranty and guarantee for the quality and performance of the commodity as per the agreed terms and conditions. Any defects or non-performance should be rectified by the Seller as per the warranty terms.XI. Termination: The Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide notice to the other party and specify the reasons for termination. The provisions related to claims, confidentiality, warranty andguarantee shall remain valid even after termination of this Contract.In witness whereof, the parties have executed this Contract in ________________ (Place) on the ________________ (Date).Buyer: _____________________ (Signature of Buyer) Title:_____________________ (Title of Buyer) Date: _________________ (Date of Signature)篇3PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer, who agree to conclude this Contract upon the terms and conditions set out below:I. Contracting PartiesSeller: ___________________________ (Name of Seller)Address: _________________________ (Address of Seller)Buyer: ___________________________ (Name of Buyer)Address: _________________________ (Address of Buyer)II. Product DescriptionProduct Name: _________________________ (Product Name)Product Code: _________________________ (Product Code)Quantity: _________________________ (Quantity)Specification: _________________________ (Product specifications, including size, color, quality, etc.)Unit Price: _________________________ (Unit Price)Total Price: _________________________ (Total Price)III. Terms of PaymentThe Buyer shall make payment through ________________ (Payment method, e.g., wire transfer, letter of credit, etc.) in full before the delivery date specified in Clause IV.IV. Delivery TermsThe Seller shall ensure delivery of the products to the Buyer's designated location on or before ________________ (Delivery Date). Any delay in delivery shall be notified to the Buyer in advance.V. Quality AssuranceThe Seller guarantees that the products shall be new, of good quality, and comply with all applicable specifications andstandards. The Seller shall be responsible for any defects in material or workmanship.VI. Packaging and ShippingThe Seller shall properly pack and secure the products for shipment to ensure their safe arrival at the Buyer's designated location. The costs of packaging and shipping shall be borne by the Seller.VII. Risk and Title TransferRisk of loss or damage to the products shall be transferred to the Buyer upon delivery at the agreed location. Title to the products shall be transferred upon full payment by the Buyer.VIII. Confidentiality and Non-DisclosureBoth parties shall keep confidential all information related to this Contract, including product specifications, pricing, and business practices. Neither party shall disclose such information to third parties without the other party's consent.IX. Warranty and After-Sales ServiceThe Seller shall provide a warranty period of ________________ (Warranty Period) for the products. During this period, the Seller shall repair or replace any defective products at its own cost. TheSeller shall also provide necessary after-sales service support as agreed by both parties.X. Force MajeureNeither party shall be liable for any failure to perform its obligations under this Contract due to force majeure events, such as natural disasters, war, riots, etc. The affected party shall notify the other party promptly and provide reasonable evidence to prove the occurrence of such event.XI. Settlement of DisputesAny disputes arising out of or in connection with this Contract shall be settled through friendly consultation between the two parties. If no settlement can be reached, the dispute shall be submitted to ________________ (Dispute Resolution Mechanism, e.g., court, arbitration, etc.) for resolution.XII. Miscellaneous Provisions1. This Contract is made in ________________ (Language) and is binding upon both parties. Any amendments or modifications to this Contract must be made in writing and agreed upon by both parties.2. This Contract constitutes the entire agreement between the parties on the subject matter hereof and supersedes all prioragreements, understandings, and communications, whether oral or written.3. The invalidity or unenforceability of any provision of this Contract shall not affect the validity or enforceability of any other provision hereof.4. The laws of ________________ (Country/Jurisdiction) shall apply to this Contract. The courts of ________________ (Country/Jurisdiction) shall have jurisdiction over any disputes arising out of or in connection with this Contract.5. The Buyer may assign this Contract without the prior written consent of the Seller. The Seller may not assign this Contract without the prior written consent of the Buyer. However, either party may assign this Contract to a third party as part of a corporate reorganization or change of control transaction without obtaining prior consent from the other party if such assignment does not materially change the obligations of either party under this Contract.篇4PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer, who agree to conclude this Contract upon the terms and conditions set out below:Seller: _________________________ (Name of Seller)Buyer: _________________________ (Name of Buyer)I. Contract Article and Quantity:The Seller agrees to sell and the Buyer agrees to purchase the following goods: (Insert details of the goods, including name, quantity, specifications, etc.)II. Price and Payment:The total contract price shall be ________ (Insert contract price). The payment terms are as follows:a. Deposit: The Buyer shall pay a deposit of ________ (Insert deposit amount) upon signing this Contract.b. Balance Payment: The balance payment shall be made within ________ (Insert payment period) after the delivery of the goods.c. Payment Method: The payment shall be made through________ (Insert payment method, e.g., bank transfer, T/T, etc.)III. Delivery and Shipment:a. Delivery Time: The Seller shall deliver the goods within________ (Insert delivery time) from the date of signing this Contract.b. Shipping Method: The goods shall be shipped by ________ (Insert shipping method, e.g., air, sea, land, etc.) at the Buyer's option.c. Place of Delivery: The place of delivery shall be ________ (Insert place of delivery).d. Risk Transfer: Risk of loss or damage to the goods shall pass to the Buyer upon delivery at the place of destination specified in this Contract.IV. Quality and Inspection:a. Quality Standards: The goods shall be in accordance with the quality standards specified in this Contract.b. Inspection: The Buyer shall have the right to inspect the goods during production and prior to shipment. The Seller shall provide necessary assistance and facilitate such inspections.c. Quality Claim: If any claim is made by the Buyer regarding quality issues, such claim shall be made within ________ (Inserttime limit) after arrival of the goods at the port of destination. The Seller shall promptly address any quality issues raised by the Buyer in accordance with this Contract.V. Packaging and Marks:The Seller shall provide suitable packaging for the goods and ensure that all necessary marks and labels are affixed on each package, including name of goods, quantity, weight, measurements, gross weight, destination address, etc. All packaging must be suitable for long-distance transportation and must withstand normal conditions during transportation and handling without damage to or loss of the contents.VI. Claims and Penalties:a. If any claim is made by the Buyer due to late delivery or any other breach by the Seller, such claim shall be made in writing within ________ (Insert time limit) from the date of arrival of the goods at the port of destination. The Seller shall promptly address any claims raised by the Buyer in accordance with this Contract.b. If the Seller fails to perform its obligations under this Contract, it shall be liable for any losses incurred by the Buyer due to such failure. Penalties for late delivery or breach ofcontract may be imposed in accordance with relevant laws and regulations.c. Any claims or disputes arising from or in connection with this Contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such claims or disputes may be submitted to arbitration in accordance with relevant laws and regulations. Any disputes arising from this Contract shall be subject to arbitration in ________ (Insert place of arbitration). The arbitration decision shall be final and binding on both parties.VII. Force Majeure:In case of Force Majeure circumstances such as war, earthquake, flood, fire or other unforeseeable circumstances rendering performance of this Contract impossible or very difficult, both parties should strive to reach agreement on a solution through consultation before invoking Force Majeure as a reason for terminating or postponing performance under this Contract..VIII.. Miscellaneous:This Contract constitutes the entire agreement between both parties pertaining to the subject matter hereof andsupercedes all prior agreements whether written or oral between both parties pertaining to such subject matter. No amendment or modification of this Contract shall be valid unless made in writing signed by both parties..IX.. Entire Agreement/ Governing Law：This Contract constitutes the entire agreement between buyer and seller relating to its subject matter and no further oral promises are made.. This contract is governed by ________ law..X.. Entire Agreement/ Severability：篇5PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: _________________ (Name of the Buyer)Seller: _________________ (Name of the Seller)I. Contracting PartiesThe contracting parties agree to conclude this Contract subject to the terms and conditions stipulated below:II. Commodities and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following commodities: _________________ (Commodities) in the quantity specified in the attached Schedule A.III. Price and Terms of Payment1. The total amount of this Contract is ___________________ (USD or other currency), the unit price per metric ton is___________________ (USD or other currency per metric ton). Total quantity and total amount shall be specified in Schedule A.IV. Delivery Time and Place of Shipment篇6Buyer (甲方): _____________________Seller (乙方): _____________________In consideration of the mutual promises and agreements made and intended to be performed under the terms and conditions stated below, the Buyer and the Seller agree as follows:1. Description of Goods （商品描述）The Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity according to the terms and conditions stipulated below:（双方在此填写商品名称、规格、数量等详细信息）2. Price and Payment Terms （价格及付款条款）The total value of this contract is ____ USD. （在此填写合同总价）Payment terms: （描述付款方式和条件，例如预付款、尾款、支付方式等）3. Delivery Terms （交货条款）The Seller shall deliver the goods within ____ days after receiving the order confirmation and payment of ____% of the total contract value.（描述交货期限、地点、方式等）4. Quality and Inspection （质量及检验）The Seller shall ensure that the goods are new, sound, in good condition, free from damage and defects, and comply with all applicable specifications and standards. The Buyer shall have the right to inspect the goods before shipment.（描述商品质量标准、检验方式等）5. Risk and Ownership Transfer （风险及所有权转移）Risk of loss or damage to the goods shall pass to the Buyer upon delivery of the goods at the agreed place of delivery. Ownership of the goods shall transfer to the Buyer upon full payment of the contract price.（描述风险和所有权转移的细节）6. Warranty and Guarantee （保修及保证）The Seller shall provide warranty and guarantee for the goods in accordance with the contract and applicable laws.（描述保修期限、保修范围、保证事项等）7. Force Majeure （不可抗力）If either party is prevented from performing its obligations due to force majeure, it shall promptly notify the other party in writing and take reasonable measures to minimize the loss.（描述不可抗力事件的认定和处理方式）8. Settlement of Disputes （争议解决）Any disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to ____ for arbitration.（描述争议解决的方式和机构等）9. General Terms （通用条款）（在此添加任何其他适用的通用条款，例如保密义务、合同修改、适用法律等）10. Miscellaneous （其他事项）This contract is made out in ____ copies, ____ for the Seller and ____ for the Buyer.（描述合同份数等）The parties have read and understood all the terms and conditions stated above and have signed this Agreement in witness thereof.（双方已阅读并理解以上所有条款和条件，并已签署本协议为证。

英文版销售合同8篇

英文版销售合同8篇篇1Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").1. Product and QuantityThe Seller agrees to sell, and the Buyer agrees to purchase the following product in the specified quantity:[Product Description, Specifications, Quantity, and Price List]2. Terms of Payment2.1 The total contract value is [Total Contract Value]. The Buyer shall make payment in full before the delivery of the products.2.2 Payment shall be made through [Bank Name], in [Currency of Payment]. The Seller shall provide the necessary banking information for payment.3. Delivery and Shipping3.1 The Seller shall deliver the products to the Buyer at the shipping address provided by the Buyer.3.2 The delivery shall be made within [Delivery Period] from the date of signing this Contract.3.3 Shipping costs shall be borne by the Buyer unless otherwise agreed upon by both parties.4. Quality and Inspection4.1 The Seller guarantees that the products shall be in accordance with the specifications mentioned in this Contract.4.2 The Buyer has the right to conduct inspections during production and upon receipt of the products. If any discrepancies are found, the Seller shall immediately replace or rectify the products at no additional cost to the Buyer.5. Force Majeure6. ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. This confidentiality obligation shall continue even after the termination of this Contract.7. Warranty and After-Sales Service8. TerminationEither party may terminate this Contract in case of material breach by the other party, which is not rectified within a reasonable period of time. Termination shall be made in writing and confirmed by both parties.9. Dispute Resolution10. MiscellaneousIn witness whereof, the parties have signed this Contract on the dates indicated below:Seller: _____________________ Date: ________________Buyer: _____________________ Date: ________________(Note: This contract template is general in nature and should be customized according to specific circumstances and legal requirements.)希望这份英文版销售合同能满足您的需求。

英文购销合同范本5篇

英文购销合同范本5篇篇1PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made on ____(Date), by and between the following two parties:Seller: ____(Seller's Name)Buyer: ____(Buyer's Name)I. PREAMBLEThe Seller agrees to sell and the Buyer agrees to purchase the following commodity under the terms and conditions stipulated below:II. COMMODITYThe commodity to be traded is ____(Commodity Name) with specifications as follows:____ (Insert specifications of the commodity, including quantity, quality, size, etc.)III. PRICE AND PAYMENT1. The total price of the commodity is ____ (Insert Total Price) USD.2. Payment shall be made by ____ (Insert Payment Method) in accordance with the following schedule:a. Down payment of ____% within __ days of signing this Contract.b. Balance payment before shipment of the commodity.IV. DELIVERY AND SHIPMENT1. Delivery date: The Seller shall deliver the commodity within __ (Insert Timeframe) from the date of receiving the balance payment.2. Shipping method: The commodity shall be shipped by ____ (Insert Shipping Method).3. Shipping documents: The Seller shall provide necessary shipping documents to facilitate customs clearance and delivery of the commodity.V. QUALITY AND INSPECTION1. The commodity shall be in accordance with the specifications stated in Section II. Any discrepancies must be reported to the Seller immediately after discovery.2. The Buyer shall conduct a pre-shipment inspection at the Seller's premises before shipment. The Seller shall provide necessary assistance for this inspection.3. If any discrepancies are found during inspection, the Seller shall rectify them promptly and bear all costs incurred.VI. FORCE MAJEUREIf either party is prevented from fulfilling its obligations due to force majeure (i.e., natural disasters, wars, riots, etc.), the party affected shall notify the other party immediately and provide evidence to support its claim. The affected party shall endeavor to overcome such difficulties and fulfill its obligations as soon as possible. The period of delay shall be extended accordingly.VII. CONFIDENTIALITY AND NON-DISCLOSUREBoth parties shall keep confidential all information related to this Contract, including but not limited to terms and conditions, prices, and other business secrets. Neither party shall disclosesuch information to any third party without the prior written consent of the other party.VIII. LIABILITY AND INDEMNITYEither party shall be liable for any breach of contract, including but not limited to late delivery, quality issues, and failure to pay. In such cases, the non-breaching party shall be entitled to claim compensation for any losses incurred due to such breach. Both parties shall indemnify each other for any losses caused by their respective breaches of contract.IX. TERMINATION AND CANCELLATIONThis Contract may be terminated or cancelled only with the mutual consent of both parties or in accordance with applicable laws and regulations. In case of termination or cancellation, both parties shall strive to minimize any losses arising from such termination or cancellation and seek a mutually satisfactory solution.X. GOVERNING LAW AND ARBITRATION1. This Contract shall be governed by and construed in accordance with the laws of ____ (Insert Country/State).篇2Seller: _________________ (卖方名称)Buyer: _________________ (买方名称)Terms and Conditions of Purchase and Sale (购销条款与条件)I. General Provisions (一般规定)1. This contract is made by and between the Seller and the Buyer: (此合同由买卖双方共同签订)2. The commodity to be purchased by the Buyer from the Seller shall be in accordance with the terms and conditions stipulated below: （买方购买卖方的商品应遵守以下条款和条件）II. Contract for Purchase and Sale of Products （产品购销合同）Product Description: （产品描述）Quantity: （数量）Unit Price: （单价）Total Price: （总价）Payment Terms: （支付条款）Delivery Date and Location: （交货日期和地点）Quality Standards and Inspection: （质量标准和检验）Risk Transfer: （风险转移）Warranty Period and After-sales Service: （保修期限和售后服务）Other Related Matters: （其他相关事项）Terms of Settlement and Delivery：（结算与交货条款）Guarantee：（担保或保证条款）等。

英文版销售合同范本6篇

英文版销售合同范本6篇篇1Sales ContractThis Sales Contract is made on [Date] by and between [Company Name] (hereinafter referred to as "Seller"), and [Buyer's Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller shall sell and the Buyer shall purchase the following goods: [Description of the goods including item number, name, specifications, quantity, and unit price].Article 2: Origin of GoodsThe origin of the goods shall be [Origin of Goods].Article 3: Price and PaymentThe total price of the goods shall be [Total Price]. The payment shall be made in [Currency] through [Payment Method] within [Payment Period].Article 4: Terms of DeliveryThe delivery of the goods shall be made by [Delivery Method] at the port of [Port of Delivery]. The risk of loss or damage shall pass to the Buyer upon delivery.Article 5: Quality and InspectionThe Seller shall ensure that the goods are in conformity with the contract specifications. The Buyer shall have the right to inspect the goods before and after delivery. If any defects are found, the Seller shall promptly rectify or replace the goods.Article 6: Packing and MarkingThe goods shall be properly packed and marked in accordance with the usual practices for transportation. The Seller shall bear all costs related to packing and marking.Article 7: Delay and Force MajeureArticle 8: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of [Warranty Period] for the goods. During this period, any defects in material or workmanship shall be rectified by the Seller without additional charge to the Buyer. The Seller shall also provide after-sales service as agreed upon by both parties.Article 9: DisputesAny disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [Dispute Resolution Mechanism] for arbitration or legal proceedings.Article 10: General ProvisionsIn witness whereof, the Seller and the Buyer have signed this contract at [Place] on [Date].Seller: _________________________ (Company Name & Signature)Buyer: _________________________ (Buyer's Name & Signature)Date: _________________________Place: _________________________(Note: This is a template Sales Contract and should be used as a reference only. It is recommended to consult with legal professionals for advice on specific terms and conditions.)篇2SALES CONTRACT1. Scope of Supply1.1 The Seller agrees to sell and the Buyer agrees to purchase the goods specified in Annex A (Product Description and Quantity) to this Contract.2. Price and Payment2.1 The Price of the goods shall be as stated in Annex A. The Price shall be paid in the currency specified in Annex B (Payment Terms).2.2 Payment terms are specified in Annex B and shall be strictly adhered to by both parties.3. Delivery and Quality Assurance3.1 Delivery of the goods shall be made according to the terms specified in Annex C (Delivery Terms).3.2 The Seller guarantees that the goods shall be of the quality as described in Annex D (Quality Assurance) and shall comply with all applicable laws and regulations in the country of destination.4. Terms of Delivery and Risk Transfer4.1 The risk of loss or damage to the goods shall pass to the Buyer upon delivery as specified in Annex C.5. Warranty and After-Sales Service5.1 The Seller shall provide a warranty for the goods as specified in Annex E (Warranty and After-Sales Service).6. Confidentiality6.1 Both parties shall maintain confidentiality of all information related to this Contract, except for information that is already in the public domain or obtained through lawful means.7. Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, war, riots, or other events beyond their reasonable control.8. Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party that is not cured within a reasonable period of time.9. Dispute Resolution9.1 Any dispute arising out of or in connection with this Contract shall be resolved through negotiation between the parties. If no settlement can be reached, the dispute shall befinally settled by arbitration in accordance with the rules of [Arbitration Institution].10. General Provisions10.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made except in writing and signed by both parties.10.2 This Contract is written in both English and [other language(s)], with the English version prevailing in case of any discrepancies.10.3 The laws of [Country] shall apply to this Contract.In Witness Whereof, the parties have executed this Contract in duplicate originals, each party retaining one original for their records.Seller: ____________________ (Authorized Representative)Date: ________Buyer: ____________________ (Authorized Representative)Date: ________篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and concluded on __ DATE __ between Seller: __NAME OF SELLER__ (hereinafter referred to as "Seller") and Buyer:__NAME OF BUYER__ (hereinafter referred to as "Buyer").1. Scope of Supply1.1 The Seller agrees to sell and the Buyer agrees to purchase the following products (hereinafter referred to as "Products"): __PRODUCT DESCRIPTION AND SPECIFICATIONS__.2. Terms of Payment2.1 The total contract value is __CONTRACT VALUE__. The Buyer shall make payment through __PAYMENT METHOD__.2.2 The payment terms are as follows:* A deposit of __PERCENTAGE OF DEPOSIT__ is to be paid within __TIME FRAME__ after signing this Contract.* The balance of the payment shall be made upon the delivery of Products and acceptance by the Buyer.3. Delivery and Shipping3.1 The Products shall be delivered to the Buyer at__SHIPPING ADDRESS__.3.2 The delivery date is __DELIVERY DATE__. The Seller shall inform the Buyer promptly if there is any delay in delivery.4. Quality Assurance4.1 The Seller guarantees that the Products shall be in conformity with the following specifications and quality standards: __PRODUCT SPECIFICATIONS AND QUALITY STANDARDS__.4.2 If the Products fail to meet the specified quality standards, the Buyer shall have the right to reject the Products or claim compensation.5. Warranty and After-Sales Service5.1 The Seller provides a warranty period of __WARRANTY PERIOD__ for the Products. During this period, any defects in material or workmanship shall be rectified by the Seller free of charge.5.2 The Seller shall provide after-sales service in accordance with the terms and conditions agreed upon by both parties.6. Risks and Liabilities6.1 Risk of loss or damage to the Products passes to the Buyer upon delivery. However, if the Products are lost or damaged during transportation, the Seller shall be responsible for making good the loss or damage.6.2 Neither party shall be liable for any failure to perform its obligations due to force majeure events, such as natural disasters, wars, riots, etc.7. Confidentiality7.1 Both parties shall keep confidential all information related to this Contract that is not intended for public disclosure.8. Settlement of Disputes8.1 Any disputes arising from or in connection with this Contract shall be settled through friendly consultation between both parties. If no settlement can be reached, the dispute may be submitted to arbitration at __ARBITRATION PLACE__ in accordance with __ARBITRATION RULES__.9. Force of Law and Jurisdiction9.1 This Contract shall be governed by and construed in accordance with the laws of __COUNTRIES/JURISDICTIONS__.10. Miscellaneous10.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed in writing by both parties.10.2 This Contract is made in __NUMBER OF COPIES__ copies, each copy having equal legal effect.10.3 If any provision of this Contract is invalid or unenforceable, it shall not affect the validity and enforceability of the remaining provisions.The parties have read and understood all the terms and conditions stated above and have signed this Contract in witness thereof:Seller:Name: __NAME OF SELLER__Signature: ________________________Date: __DATE__Buyer:Name: __NAME OF BUYER__Signature: ________________________Date: __DATE__篇4SALES CONTRACTThis Sales Contract is made on [合同生效日期] by and between [卖方全称及注册地址], a legal entity duly organized under the laws of [卖方所在国家名称], hereinafter referred to as "Seller" and [买方全称及注册地址], a legal entity duly organized under the laws of [买方所在国家名称], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the following commodity: [商品名称及规格] in accordance with the terms and conditions stipulated below.2. Price and Payment2.1 The Price of the commodity shall be fixed at [商品定价].2.2 Payment shall be made by [支付方式，例如：T/T电汇，L/C信用证等]. Details are as follows: [支付细节及时间表].3. DeliveryThe Seller shall deliver the goods to the port of [交货港口] no later than [最晚交货日期].4. Quality and Inspection4.2 The Buyer shall have the right to conductinspection/supervision of the goods during production process at Seller's factory at any time after receiving a written request from Seller. Details of such inspection shall be agreed mutually by both parties.5. Risk and Transfer of OwnershipThe risk of loss or damage to the goods shall be borne by the Seller until delivery of the goods to the port of destination specified in Article 3 above, at which point ownership shall pass to the Buyer.6. Packing and Shipping Marks7. Insurance8. Warranty and Claims篇5SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and Buyer shall be identified as per the signatures at the end of this Contract.Article 2: Product DescriptionThe Product to be sold is [describe the product clearly]. Additionally, any relevant specifications, dimensions, or other necessary information must be stated clearly in this section.Article 3: Quantity and Unit PriceThe Seller agrees to sell and the Buyer agrees to purchase [quantity] of the Product, with a unit price of [unit price].Article 4: Terms of Payment4.1 Payment shall be made within [specify the time period,e.g., 30 days] after the date of receipt of invoice.4.2 The mode of payment shall be [specify the mode, e.g., T/T (Telegraphic Transfer) or L/C (Letter of Credit)].4.3 In case of L/C, the Buyer shall open an irrevocable L/C in favor of the Seller.Article 5: Delivery5.1 The Product shall be delivered at [delivery location].5.2 The delivery shall be made within [specify the time period].5.3 Any delay in delivery shall be notified to the Buyer in advance.Article 6: Quality AssuranceThe Seller guarantees that the Product shall be in accordance with the specifications mentioned in Article 2 and shall be free from any defects in material and workmanship.Article 7: WarrantyThe Seller provides a warranty for the Product as follows: [describe the warranty terms].Article 8: Force MajeureIn case of force majeure events, both parties shall be relieved from their obligations under this Contract to the extent of such events.Article 9: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not meant for public disclosure.Article 10: LiabilitiesIn case of any breach of Contract by either party, the other party shall have the right to claim damages.Article 11: DisputesAny dispute arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit the dispute to [specify the court or arbitration institution] for resolution.Article 12: Miscellanea篇6Sales ContractThis Sales Contract is made on [Date] by and between [Company Name] (hereinafter referred to as "Seller"), and [Buyer Name] (hereinafter referred to as "Buyer").1. Product Description and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following products: [List of products, including name, specifications, quantity, and agreed-upon unit price].2. Terms of PaymentPayment shall be made in advance by [Method of Payment] (e.g., wire transfer, credit card, etc.) within [Time Limit] from the date of the Contract. A copy of the bank receipt as evidence of payment shall be promptly sent to the Seller after payment.3. Delivery and ShippingThe Seller shall deliver the products to the Buyer at the agreed quantity and quality within [Delivery Timeframe]. Shipping shall be arranged by the Buyer at the Buyer's cost. Any delay in delivery due to reasons beyond the Seller's control shall be promptly notified to the Buyer.4. Quality AssuranceThe Seller guarantees that the products shall be in accordance with the agreed specifications and free from any defects in material and workmanship. Should any defects be found, the Seller shall promptly replace or repair such products at no additional cost to the Buyer.5. Warranty and Liabilities6. Force MajeureNeither party shall be liable for failure to perform due to causes beyond their reasonable control, such as acts of war, riots, earthquakes, floods, fires, etc. Should such events occur, the affected party shall promptly notify the other party of the situation and its impact on performance.7. ConfidentialityBoth parties shall maintain confidentiality of any information related to this Contract that is not intended for public disclosure. Such information includes business secrets, technical data, pricing, and other confidential matters agreed upon by both parties.8. TerminationThis Contract may be terminated by either party in case of default by the other party that cannot be rectified within areasonable period of time. Any termination must be notified to the other party in writing and shall be effective upon receipt of such notification.9. Law and Jurisdiction10. Miscellaneous。

英文销售合同8篇

英文销售合同8篇篇1SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into on [Date], by and between [Seller Name], with its principal place of business located at [Seller Address] (hereinafter referred to as the "Seller"), and [Buyer Name], with its principal place of business located at [Buyer Address] (hereinafter referred to as the "Buyer").1. Scope of Contract:The Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A attached hereto, in the quantities specified, at the prices agreed, and in accordance with the terms and conditions stipulated below.2. Product Description:The products to be sold under this Contract are described in Annex A, including but not limited to specifications, quality,quantity, and packaging. The Seller shall ensure that the products comply with the descriptions set out in Annex A.3. Price and Payment:3.1 The price of the products shall be as stated in Annex A. The Seller shall not increase the price during the term of this Contract without the prior written consent of the Buyer.3.2 Payment shall be made through the payment method specified in Annex B, which is attached to this Contract and made a part of it. The Seller shall ensure proper receipt of payment as per the terms specified in Annex B.4. Delivery:4.1 The Seller shall ensure timely delivery of the products to the place specified by the Buyer as per Annex C attached hereto.4.2 In case of delay in delivery, the Seller shall promptly notify the Buyer and shall compensate for any losses incurred by the Buyer due to such delay.5. Quality Assurance:5.1 The Seller shall ensure that the products are manufactured in accordance with the quality standards specified in Annex A.5.2 If any product does not meet the specified quality standards, the Seller shall replace such product or refund the cost at its sole discretion.6. Warranty:The Seller warrants that all products sold to the Buyer are free from defects in material and workmanship under normal use for a period of [duration] from the date of delivery to the Buyer. During this period, any product found to be defective shall be replaced or refunded at the Seller's sole discretion.7. Confidentiality:Both parties shall maintain confidentiality of all information related to this Contract that is not intended for public disclosure. This includes but is not limited to product specifications, pricing, and business strategies.8. Force Majeure:Neither party shall be liable for failure or delay in performance due to causes beyond its reasonable control, including but not limited to acts of nature, war, terrorism, riots, or civil commotion.9. Termination:This Contract may be terminated by either party giving a written notice to the other party if there is a material breach of any term or condition of this Contract which is not cured within a reasonable period of time.10. Jurisdiction and Law:This Contract shall be governed by and interpreted in accordance with the laws of [Country/State]. Any dispute arising out of or in connection with this Contract shall be submitted to [specific court/tribunal] located in [specific place] for resolution.11. Miscellaneous:11.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed upon by both parties in writing.11.2 This Contract may not be assigned or transferred by either party without the prior written consent of the other party.11.3 Any notice required or permitted under this Contract shall be given in writing and shall be deemed given when delivered personally or sent by email/registered mail/courierservice to the address specified in this Contract or notified by either party.In witness whereof, the parties have executed this Contract as of the date first written above.Seller: _____________________ (Signature) Date: ________ (Date)Buyer: _____________________ (Signature) Date: ________ (Date)附件A: 产品清单及规格附件B: 支付条款和条件附件C: 交付条款和条件…… 其他附件可继续添加以满足特定需求。

英文购销合同

英文购销合同英文购销合同「篇一」Party A (Supplier):______________Party B (purchaser):______________Through friendly negotiation, Party A and Party B have reached the following agreement on the purchase of xx mobile phone from Party A:1、 Party A provides product training, sales scheme and after-sales service to Party B. after Party B purchases Party A's products, it is strictly prohibited to collude with Party A without the permission of Party A。

2、 Party B shall pay RMB on the day when both parties confirm to sign the contract______ Yuan only (in words: ____). If after-sales service and repair are required in the future, the freight shall be borne by the shipper。

3、 Rights and obligations of both parties1. Grant the right to operate - Party A only allows Party B to operate a single store (if it is necessary to authorize patent chain franchise, please note the additional terms on the next page and sign them together). Party B operates independently without Party A's interference and participation。

英文版销售合同范本6篇

英文版销售合同范本6篇篇1Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Product Description and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, which shall be in accordance with the specifications and standards attached. The quantity of the products shall be as stated in Annex A.2. Price and PaymentThe total contract price for the products listed in Annex A shall be [Contract Price] USD. The payment terms are as follows:* A down payment of [Percentage] percent of the total contract price shall be paid within [Deposit Payment Days] days after the signing of this contract.* The balance of the contract price shall be paid against the delivery of the products, confirmed by the Seller, within [Payment Days] days after shipment.All payments shall be made through [Bank Name], in favor of the Seller.3. Delivery and ShipmentThe products shall be delivered FOB (Free On Board) at [Port Name], with transportation arranged by the Buyer. The estimated time of arrival at the port is [Estimated Arrival]. Any delay due to factors beyond the Seller's control should be notified to the Buyer in writing promptly upon occurrence.4. Quality Assurance and WarrantyThe Seller guarantees that the products are new, of high quality, and comply with all applicable specifications and standards. The Seller shall provide a warranty period of [Warranty Period] from the date of delivery, during which any defects in material or workmanship will be rectified promptly by the Seller.5. Terms of ContractThis contract is valid for both parties and cannot be terminated without mutual consent. The Seller and the Buyer shall ensure compliance with all terms and conditions stated herein. If either party breaches this contract, the other party may seek legal remedies.6. Force MajeureNeither party shall be liable for failure to perform its obligations under this contract due to force majeure events, such as natural disasters, wars, riots, or other unforeseeable events beyond their control. The affected party shall notify the other party promptly upon occurrence of such events.7. DisputesAny disputes arising out of or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit the dispute to [Court/Arbitration Tribunal] for resolution.8. MiscellaneousThis contract is made in both English and [Local Language], with equal validity. In case of any discrepancies between the two versions, the English version shall prevail. This contractconstitutes the entire agreement between the Seller and the Buyer on the subject matter hereof, and no modification shall be made except in writing and signed by both parties.In witness whereof, the Seller and the Buyer have executed this Sales Contract in duplicate originals, with each party retaining one original for their respective records.Seller: _____________________ (Authorized Representative)Date: _____Buyer: _____________________ (Authorized Representative)Date: _____(Note: This is a template only and should be customized according to specific requirements and circumstances.)（附件A：产品列表和规格）（附件B：其他相关条款和细则）篇2Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country],hereinafter referred to as "Seller" and [Buyer's Name], a legal entity registered in [Buyer's Country], hereinafter referred to as "Buyer".1. ProductsThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A attached hereto, including but not limited to their specifications, quantities, and pricing.2. Delivery2.1 The Seller shall deliver the products to the address specified by the Buyer in the order confirmed by both parties.2.2 The delivery shall be made within [Delivery Period] from the date of signing this Contract.3. Payment3.1 The payment shall be made through the terms agreed by both parties, such as T/T (telegraphic transfer), L/C (letter of credit), etc.3.2 The Buyer shall make the payment within [Payment Period] after the signing of this Contract.4. Quality and QuantityThe Seller shall ensure that the quality and quantity of the products delivered are in accordance with the terms and conditions agreed in this Contract and Annex A.5. Warranty and Returns5.1 The Seller guarantees that the products are new, comply with all applicable specifications, are free from defects in material and workmanship, and conform to any other agreed standards.5.2 In case of any defects in quality or non-conformity with the Contract, the Buyer shall have the right to return the products and claim compensation for any losses incurred.6. Force MajeureIn case of force majeure events, such as natural disasters, wars, political unrests, etc., which prevent either party from fulfilling its contractual obligations, the affected party shall notify the other party immediately and both parties shall discuss and determine the necessary measures to be taken.7. ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure.8. TerminationThis Contract may be terminated by either party in case of breach of any of its terms by the other party, provided that such termination is notified to the latter in writing within [Notification Period] from the date of awareness of such breach.9. Jurisdiction and DisputesAny disputes arising out of or in connection with this Contract shall be settled through friendly consultation between both parties. If no settlement can be reached, either party may submit such disputes to [Court Name or Arbitrator] for resolution.10. Miscellaneous篇3Sales ContractThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Name: ______________________Address: ______________________Country: ______________________Seller:Name: ______________________Address: ______________________Country: ______________________Article 1: Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the products specified in this Contract. The details of the products are as follows:* Product Name: ______________________* Quantity: ________________ (Units)* Quality/Specification: In accordance with the attached specifications sheet.* Price: USD ____ per unit, total value of the contract USD _______________.* Place of Origin: ________________ (Country/Region)* Delivery Date: ________________ (Date)Article 2: Terms of DeliveryThe products shall be delivered FOB (Free On Board) at the port of ________________ (Port Name) on the agreed delivery date. The risk of loss or damage shall be transferred to the Buyer upon loading of the products onto the vessel.Article 3: Terms of PaymentPayment shall be made by T/T (Telegraphic Transfer) to the Seller's account within 30 days after the signing of this Contract. The Seller shall provide necessary documents for customs clearance.Article 4: Quality & InspectionThe Seller shall ensure that the products are in accordance with the agreed specifications and free from any defects. The Buyer shall have the right to conduct inspections at the loading port. If any discrepancies are found, the Seller shall rectify them promptly.Article 5: Force MajeureIf either party is prevented from performing its obligations due to force majeure events, such as natural disasters, wars, riots, etc., the affected party shall notify the other party immediatelyand take reasonable measures to minimize the impact. Neither party shall be liable for damages caused by force majeure events.Article 6: Warranty & After-Sales ServiceThe Seller shall provide a one-year warranty for the products. During this period, any defects in material or workmanship shall be rectified by the Seller free of charge. The Seller shall also provide necessary after-sales service support.Article 7: ConfidentialityBoth parties shall keep confidential all information related to this Contract, including but not limited to product specifications, pricing, and business strategies. Such information shall not be disclosed to any third party without the prior consent of both parties.Article 8: TerminationThis Contract may be terminated by either party in case of fundamental breach by the other party. In such case, thenon-breaching party shall have the right to claim compensation for any losses incurred. Termination shall be subject to mutual agreement and confirmed in writing.Article 9: Dispute ResolutionAny disputes arising from or in connection with this Contract shall be settled through friendly negotiations. If no settlement can be reached, such disputes shall be submitted to arbitration at ________________ (Arbitration Institution) in accordance with its arbitration rules. The arbitration award shall be final and binding on both parties.Article 10: Miscellaneous篇4Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller") and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").Preamble:The Seller and the Buyer, through mutual consultation and in accordance with the principles of integrity and fairness, agree to enter into this Sales Contract with respect to the sale of the products listed below.Article 1: Product Description1.1 The Seller shall sell and the Buyer shall purchase the products specified in the attached Product List, which forms an integral part of this Contract.Article 2: Price and Payment2.1 The total price for the products listed in the Product List shall be as stated in the List, inclusive of all applicable taxes and charges.2.2 Payment shall be made through [specify payment method] in accordance with the payment schedule agreed upon by both parties.Article 3: Delivery3.1 The Seller shall ensure timely delivery of the products to the Buyer's designated location.3.2 Any delay in delivery shall be notified to the Buyer in advance, with reasons provided.Article 4: Quality Assurance4.1 The Seller guarantees that the products sold to the Buyer are genuine and meet all applicable quality standards.4.2 In case of any defect or discrepancy, the Seller shall replace the products or provide a refund, as per the terms agreed by both parties.Article 5: Warranty and After-Sales Service5.1 The Seller shall provide a warranty period for the products, details of which are specified in the Product List.5.2 The Seller shall provide after-sales service as per the terms and conditions specified in this Contract.Article 6: Force Majeure6.1 In case of force majeure events, either party may be relieved from liability for failure to perform its obligations under this Contract, provided that such failure is caused by reasons beyond its control.Article 7: Confidentiality7.1 Both parties shall maintain confidentiality of all information related to this Contract, unless otherwise agreed or required by law.Article 8: Termination8.1 This Contract may be terminated by either party giving a written notice to the other, subject to mutual agreement and compliance with all outstanding obligations.Article 9: Disputes9.1 Any dispute arising out of or in connection with this Contract shall be resolved through friendly consultation between both parties. If no settlement can be reached, the dispute shall be referred to [specify arbitration institution] for arbitration.Article 10: Miscellaneous10.1 This Contract is made in both English and [specify other language if necessary], both versions being equally authentic.10.2 This Contract constitutes the entire agreement between the Seller and the Buyer pertaining to the sale of the products listed in the Product List. No modifications shall be made to this Contract unless agreed by both parties in writing.10.3 This Contract shall be governed by and construed in accordance with the laws of [specify applicablecountry/jurisdiction].IN WITNESS WHEREOF, the parties have signed this Contract in duplicate, each party retaining one duplicate for their records.篇5Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Scope of Contract(a) The Seller agrees to sell and the Buyer agrees to purchase the under mentioned goods/products, details of which are specified in Appendix A attached to this Contract.(b) The items, specifications, quantity, and price of the goods/products are agreed upon by both parties.2. Delivery(a) The Seller shall deliver the goods/products to the Buyer at the place specified in Appendix A.(b) The delivery schedule is stated in Appendix A, and any delay should be mutually agreed in writing.(c) The risk of loss or damage to the goods/products shall pass to the Buyer upon delivery.3. Terms of Payment(a) The payment for the goods/products shall be made in accordance with the terms stated in Appendix B.(b) Any delay in payment shall be subject to a late payment fee or interest, as mutually agreed upon.4. Quality Assurance(a) The Seller guarantees that the goods/products are new and comply with the specifications stated in Appendix A.(b) In case of any defect in quality or specifications, the Buyer shall have the right to reject the goods/products or claim compensation, as per mutually agreed terms.5. Warranty and After-Sales Service(a) The Seller provides a warranty period of [specify period] from the date of delivery for any manufacturing defects in the goods/products.(b) During the warranty period, the Seller shall, at its own expense, repair or replace any defective goods/products.(c) After the warranty period, the Seller shall provideafter-sales service as per mutually agreed terms.6. Force MajeureIn case of any delay or failure in performance due to acts of God, war, riots, civil commotion, strikes, governmental orders or any other causes beyond the control of either party, neither party shall be deemed to be in default hereunder.7. ConfidentialityBoth parties shall keep confidential all information, including but not limited to trade secrets, business practices, and other proprietary information, disclosed during the execution of this Contract.8. DisputesAny dispute arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, the dispute may be submitted to [specify court/arbitration institution] for resolution.9. General ProvisionsThis Contract constitutes the entire agreement between the parties on the subject matter hereof and may not be modifiedexcept by written agreement signed by both parties. This Contract shall be governed by and construed in accordance with the laws of [specify country].This Contract is made in [specify language] and [specify number of copies] copies of this Contract shall be made, each party holding one copy.For Seller:[Seller's Name][Seller's Signature]Date: _____________For Buyer:[Buyer's Name][Buyer's Signature]Date: _____________Appendix A: Detailed List of Goods/Products and Terms of DeliveryAppendix B: Terms of Payment and Related DetailsNote: This contract template is for reference only and should be customized according to specific requirements andcircumstances before use. It is advisable to have legal professionals review any contract before signing.篇6Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").1. Scope of Contract(a) The Seller agrees to sell and the Buyer agrees to purchase the goods specified in this Contract under the terms and conditions set out below.(b) The items, specifications, quality, quantity, packaging, and other related details of the goods are listed in Annex A.2. Price and Payment(a) The total contract price for the goods shall be [Contract Price] USD, which is fixed and firm.(b) Payment shall be made as follows:1. A deposit of [Deposit Percentage]% (percent) of the total contract price shall be paid within [Deposit Payment Days] days upon signing of this Contract.2. The balance of [Balance Payment]% shall be paid against the presentation of the original Bill of Lading and other shipping documents specified in Clause 9.(c) All banking fees, transfer fees, and other related costs shall be borne by the Buyer unless otherwise agreed by both parties.3. Delivery(a) The goods shall be delivered FOB (Free On Board) [Port of Origin] within [Delivery Period] after receipt of the deposit.(b) Any delay in delivery due to reasons beyond the Seller's control shall be notified immediately to the Buyer.4. Quality and Inspection(a) The Seller shall ensure that the quality of the goods conforms to the specifications mentioned in Annex A.(b) The Buyer shall have the right to conduct inspections at the Seller's premises or at any other place agreed upon during production or pre-shipment stages.5. Claims and Returns(a) If the goods are found to be defective or not in conformity with the Contract specifications, the Buyer shall notify the Seller immediately and have the right to return the goods for a replacement or refund.(b) All costs related to claims and returns shall be borne by the Seller unless otherwise agreed by both parties.6. Force MajeureNeither party shall be liable for any delay or failure in performance due to unforeseen events or circumstances beyond their reasonable control, such as natural disasters, government policies, wars, riots, etc.7. ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure.8. TerminationThis Contract may be terminated by either party in case of material breach by the other party that is not rectified within a reasonable period of time.9. Miscellaneous(a) This Contract is made in both English and [Other Language], with the English version prevailing in case of any discrepancies.(b) Any amendments or modifications to this Contract must be made in writing and agreed by both parties.(c) All disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its rules.(d) This Contract is effective from the date of signing by both parties and shall remain valid until fully performed or terminated as stated above.(e) This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed in writing by both parties.(f) The laws of [Applicable Law Jurisdiction] shall apply to this Contract.In witness whereof, the parties have signed this Contract in _________ .For the Seller:Name: _________________________Title: _________________________Date: _________________________Signature: _________________________For the Buyer:Name: _________________________Title: _________________________Date: _________________________Signature: _________________________。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

购销合同英文范本
购销合同英文范本
Contract of Product Procurement
供方：Supplier:
需方： Demander:
签订日期：Date of Signature:
供方向需方提供______ 类产品(具体产品名称、编号、规格及单价等详见报价单)，供需双方本着平等互利、协商一致的原则，签订本合同，以资双方信守执行。

Under the principle of mutual equality and benefit, the Supplier is to provide Demander with ______products (refers to the price quotation sheet for the name, code, specification and price of the products). Both parties agree to enter into this contract for execution.
一、合同定义： Definitions:
1、采购合同：是指包括本合同以及依据本合同所签订生效的相关订单、合同附件和补充规定，以及双方不时签署或确认的工程、计划、规格变更通知等在内的全部书面文件。

Procurement Contract means all written documents, including this contract and the relevant order entered into and validated under this contract, attached files and supplementary
regulations to this contract, and such notices as modifications to project, schedule and specification signed and confirmed by both parties from time to time.
2、价格：指由双方协商确定的产品价格，以双方签字生效的报价单为准。

Price means the price of the products on the price quotation sheet validated and signed by both parities.
3、产品：指在生效采购合同、订单、报价单或双方签署的规格，质量，维修条款/协议中所列的由供方提供给需方的产品和/或服务，在本合同中，产品与服务统称为产品。

Product means any products and/or services the Supplier provide to the Demander under the effective procurement contract, order, price quotation sheet or specification, quality and maintenance terms and conditions / agreements signed by both parties, and refer to both the products and services in this contract. 4、生效订单：指需方发给供方并经供方依照双方约定或需方要求的方式在相应时间内进行确认后的，包含产品型号、数量、价格、交货条款、支付条款等内容的正式订货通知，是授权供方按照本合同履行交货义务的文件。

Effective Order means an formal order-placing notice containing such content as model, quantity, price, delivery conditions and payment conditions of the products, delivered from the Demander
to the Supplier and confirmed within the corresponding time, by the means agreed upon by both parties or the means requested by the Demander, which is a document authorizing the Supplier to exercise its responsibility to deliver the products under this contract.
5、需方商标：指需方拥有的"TCL"、"TCL-legrand"、"LEGRAND"或以上文字或图形的任意组合以及需方目前拥有的或现在正在申请的、或将来所有的其他商标或其它标识。

Demander's Trademark means any name or sign containing either TCL, or TCL International Electrical, or Legrand or any combination of the foregoing which is currently owned by the Demander and application is being lodged or will be lodged for trademark or logo.
6、产品支持文件：是指任何产品说明书、图纸、电路图、用户手册、市场推广材料、合格证及其他类似的文件资料。

Product Supporting Document means instruction, drawing, circuit diagram, user's manual, marketing materials, quality certificate and any other similar document information for any products.
二、采购合同效力： Effect of Procurement Contract::
1、本合同的条款和条件均适用于依据本合同所制定生效的附则、订单、报价单及补充协议、相关修订书。

供方和需方将就需方依据本合。

购销合同英文范本

英文销售合同模板3篇

关于英文销售合同范本6篇

销售合同英文范本6篇

英文购销合同范本6篇

最新英文销售合同模板6篇

英文销售合同模板5篇

购销英文合同范本三篇

英文版销售合同范本8篇

英文版销售合同样本5篇

英文购销合同_中英文对照购销合同范本

英文购销合同范本8篇

销售合同英文范本8篇

英文购销合同范本6篇

英文版销售合同8篇

英文购销合同范本5篇

英文版销售合同范本6篇

英文销售合同8篇

英文购销合同

英文版销售合同范本6篇