诺瓦科技LED视频处理器VS0规格书
诺瓦科技LED视频处理器VS0规格书
子视 频 编 码 ： MPEG-1 、 MPEG-2 、 MPEG-4 、 Sorenson
H263、H.264、HEVC（H.265）、RV8/9/10 和 RV40。
AUDIO
电2
音频输入和输出。
Android 子卡
瓦1 诺 （可选子卡） 安输出接口
USB
U 盘视频图片文件播放。 连接鼠标。
非经本公司书面许可任何单位和个人不得擅自摘抄复制本文档内容的部分或全部并不得以任何形式传视频处理器vs0规格书概述wwwnovastarledcn概述vs0视频处理器是诺瓦科技推出的一款操作简易功能丰富的纯硬件设备支持高清多类型接口输入基于强大的视频处理平台可对输入源进行图像画质调整为您带来更加灵活的画面构造体验
连接中控设备。
USB(Type B) 1
程序升级。
4
视频处理器 VS0 规格书
4 尺寸
4 尺寸
司
公
限
有
技
科
子
电
瓦
诺
安Байду номын сангаас
单位：mm
西
5
视频处理器 VS0 规格书
5 应用场景
5 应用场景
西安诺瓦电子科技有限公司
WiFi：设备通过 WiFi 模式连接网络。 WiFi/AP
AP：Access Point，提供无线接入。
西 接口
数量 说明
DVI-D
2
VESA 标准，最高支持 1920×1080@60Hz 视频源输出，
向下兼容，DVI1 和 DVI2 互为复制输出。
控制接口
接口
数量 说明
网口（RS232） 1
多画面全彩LED视频处理器诺瓦科技VX2U技术文档规格书
Video Controller VX2URev1.0.2 NS160100226OverviewVX2U is a professional LED display controller of NovaStar. Besideshaving all the functions of an LED display controller, it also features powerful front end video processing. With high image quality and flexible image control, VX2U is able to meet the demands of mediaFeatures1) The inputs of VX2U include CVBS ×2, VGA ×2, DVI ×1, HDMI ×1, DP ×1 and USB ×1. The supported input resolution is up to 1920 ×1200@60 H z. The input images of VX2U can be zoomedpoint-to-point a c cording to the resolution of LED display.2) With seamless quick switch and fade-in/ fade-out effects to enhanceand present pictures of professional quality.3) The location and size of PIP (Picture in Picture) can be adjusted,which can be controlled at will.industry.scanning lines. Images are exquisite and have a good sense of depth.5)Able to implement white balance calibration and color gamutmapping based on different features of LEDs used by screens toensure restoration of true colors.6)HDMI/external independent audio input.7)Supports high-bit video input, 10bit/8bit.8)Loading capacity of video output: 1.3 million pixels.9)Supports multiple controller montage for loading huge screen;10) S upports Nova's new-generation pixel-by-pixel calibrationtechnology and the calibration is fast and efficient.11) C omputer software for system configuration is not necessary. Thesystem can be configured by one knob and one button. All can be done just by fingers. That's what we called T ouch Track.12) A dopts an innovative design to implement smart configuration.Screen settings can be completed within 30 seconds, which has greatly shorten the preparation time.13) W ith an intuitive LCD interface and clear button indicator lights tosimplify the control of the system.DimensionsAppearance(mm)Rear PanelTip: Type A USB interfaces on both the front and rear panel are not allowed to connect PC directly.Speci ficatiAppendixConflict list of PIP signal sources Page 10。
多屏拼接LED视频处理器诺瓦科技VX系列连接方法用户手册
视频控制器VX系列产品用户手册声明欢迎您选用西安诺瓦电子科技有限公司（以下简称诺瓦科技）的产品，如果本文档为您了解和使用产品带来帮助和便利，我们深感欣慰。
我们在编写文档时力求精确可靠，随时可能对内容进行修改或变更，恕不另行通知。
如果您在使用中遇到任何问题，或者有好的建议，请按照文档提供的联系方式联系我们。
对您在使用中遇到的问题，我们会尽力给予支持，对您提出的建议，我们衷心感谢并会尽快评估采纳。
版权本文档版权归诺瓦科技所有，未经本公司书面许可，任何单位或个人不得以任何形式对文本内容进行复制、摘录等，违者必究。
商标是诺瓦科技的注册商标。
安全声明为避免可能的危险，请按规定使用此设备。
如出现损坏，非专业人士请勿擅自打开维修，请及时与本公司售后联系。
高压危险：本产品的工作电压为100～240V AC。
接地：本产品通过电源的地线与大地相连，请确保接地导体的良好接地。
电磁干扰：设备应远离磁铁、马达及变压器。
防潮：请将设备置于干燥、干净的环境中。
如有液体浸入，请立即拔掉电源插头。
远离易燃易爆危险物品。
禁止液体、金属碎片浸入机器内部，以免引起安全事故。
目录1型号说明 12外观说明 1前面板 1后面板 2 3信号连接 54安装尺寸 55操作动作说明 66主界面 67菜单操作 7第一步输入设置 7 第二步快捷点屏 8 第三步亮度调节 9 第四步输出设置 9 拼接带载 11 高级设置 12 U 盘播放设置 17 工厂复位 17 通讯设置 17语言设置 18 8技术规格 189常见问题 191 型号说明型号描述VX2输入接口：1 路 DVI，3 路 VGA，2 路 CVBS，1 路 HDMI，1 路 DPVX2U输入接口：1 路 DVI，2 路 VGA，2 路 CVBS，1 路 HDMI，1 路 DP，1 路 USB VX4输入接口：2 路 DVI，3 路 VGA，3 路 CVBS，1 路 HDMI，1 路 DPVX4S输入接口：1 路 DVI，2 路 VGA，2 路 CVBS，1 路 HDMI，1 路 DP，1 路 SDIVX4U输入接口：1 路 DVI，2 路 VGA，2 路 CVBS，1 路 HDMI，1 路 DP，1 路 USB 提示：VX 系列产品的接口类型及接口个数不同、功能和技术参数基本相同，本手册以 VX4U 为例进行描述。
诺瓦科技LED显示屏拼接视频控制器VX4S规格书
LED Display Video Controller VX4SRev1.0.3 NS160110155GeneralThe VX4S is a professional LED display controller. Besides the function ofdisplay control, it also features in powerful front end processing, so anexternal scalar is no longer needed. With professional interfaces integrated,VX4S with excellent image quality and flexible image control greatly meet theneeds of the broadcast industry, Its friendly in user-interface. so that thedisplay to work has never been as easier and more enjoyable as with VX4S. Feature1) The inputs of the VX4S include CVBS×2, VGA×2, DVI×1, HDMI×1 , DP×1 and SDI×1. They support input resolution up to 1920×1200@60Hz;the input images of VX4S can be zoomed point-to-point according to thescreen resolution;2) Provide seamless high-speed switch and fade-in/ fade-out effect so as tostrengthen and display picture demonstration of professional quality;3) The location and size of PIP can both be adjusted, which can becontrolledat will;4) Adopt the Nova G4 engine; the screen is stable and flicker free withoutscanning lines; the images are exquisite and have a good sense of depth;5) Can implement white balance calibration and color gamut mapping basedon different features of LEDs used by screens to ensure reproduction oftrue colors;6) HDMI/external audio input;7) 10bit/8bit HD video source;8) The loading capacity: 2.3 million pixel;9) Support multiple controller montage for loading huge screen;10) Support Nova's new-generation point-by-point correction technology; thecorrection is fast and efficient;11) Computer software for system configuration is not necessary. The systemcan be configured using one knob and one button. All can be done justby fingers. That's what we called Touch Track!12) Adopt an innovative architecture to implement smart configuration; thescreen debugging can be completed within 30 seconds; greatly shortenthe preparation time on the stage;13) A intuitive LCD display interface and clear button light hint simplify theAppearance descriptionFront panelcontrol of the system.Type A, female USB USB Cascade OUTTips：The two USB ( typeA) on front panel and rear panel are both forbiddento connect with PC directly.Specification ParametersAttachment。
诺瓦VS7视频拼接处理器规格书说明书
VS7视频拼接处理器V2.2.0 NS160000528诺瓦多画面拼接处理器嵌入式软件V3.0规格书简介VS7是由诺瓦科技自主研发的一款集视频处理，画面拼接，特效切换和多画面显示的高性能拼接处理器。
VS7具备强大的视频信号接收和处理能力，最大支持4K×2K@30Hz视频输入，并最大可同时支持7路输入和5个独立窗口。
最大支持4路DVI拼接输出，单机最大带载可达8KK。
基于强大的FPGA处理平台，支持输入输出EDID管理和画质调整，多种输入源的无缝切换和淡入淡出等切换特效，可以为您带来更加灵活的画面构造体验。
另外，VS7配套全新的智能管理软件V-Can，用户可以通过V-Can或VS7前面板完成丰富的画面拼接效果。
VS7凭借其优异的画质和超大分辨率带载，以及灵活多样的操控方式，可被广泛应用于会议报告，展览展示中心等场景中。
特性●支持市面常见的视频输入接口−DVI接口，支持1920×1080@60Hz输入−HDMI 1.3接口，支持1920×1080@60Hz输入−3G-SDI接口，支持1920×1080@60Hz输入−DP 1.1接口，支持3840×2160@30Hz输入−HDMI 1.4接口，支持3840×2160@30Hz输入−VGA接口，支持1920×1080@60Hz源输入●单机4个DVI接口拼接输出最大支持4接口拼接输出，支持水平拼接、垂直拼接和田字拼接，且最大带载高达920万像素，单个DVI输出最宽或最高可支持3840像素，四路拼接最宽或最高可支持到15360像素。
●多窗口显示支持添加5个窗口任意布局，且每个窗口支持跨接口输出●HDMI预监输出−支持单一输入源预监或输出画面预监−支持所有输入源和输出画面预监−支持叠加显示输入分辨率和帧频等信息●画面控制功能支持画面一键黑屏，冻结●EDID管理支持DVI、HDMI和DP接口的输入分辨率管理●画面特效切换支持窗口切源特效，并支持特效切换持续时长设置●BKG抓取支持输入源画面抓取，并将抓取的图片用于BKG ●BKG配置支持选择图片或者配置纯色作为BKG，最大支持保存6张BKG图片●支持输入源画质，窗口画质和输出画质调整●多场景管理支持创建32个用户自定义场景，可一键调用●窗口模板管理内置7个窗口模板，直接调用窗口模板进行快速窗口布局●多种操控方式支持使用智能控制软件V-Can或VS7前面板操控设备●直观的前面板彩色LCD显示界面，清晰的按键灯提示，简化了系统的控制操作外观前面板开关键窗口键输入源LCD旋钮返回键FREEZE功能键后面板应用场景VS7支持最大4路输出拼接，其场景连接如下所示。
诺瓦科技LED屏视频处理器VX4U规格书
诺瓦科技LED屏视频处理器VX4U规格书SpecificationsVideo Controller VX4URev1.0.3 NS160100233 OverviewVX4U is a professional LED display controller of NovaStar.Besides having all the functions of an LED display controller,it also features powerful front end video processing. Withhigh image quality and flexible image control, VX4U is ableFeatures×2 , ×2 , ×1 , ×11T he inputs of the VX4U include1 ×DP ×1 and ×. The supported input resolution1921200@60Hz. The input images of VX4U can beccording to the resolution of LED point-to-poi2W ith seamless quick switch and fade-in/out effects t present pictures of professional3T he location and size of PIP (Picture in Picture) ar can be controlled at4A dopts Nova G4 engine. The screen is stable and flicke scanning lines. Images are exquisite and have a depth.5A ble to perform white balance calibration and coloto meet the demands of media industry.7)S upports high-bit video input, 10bit/8bit.8)L oading capacity of video output:2.3 million pixels.9)S upports multiple controller montage for loading huge screen;10)Supports Nova's new-generation pixel-by-pixel calibrationtechnology and the calibration is fast and efficient.11)Adopts an innovative design to enable smart configuration. Screensettings can be completed within several minutes, which has greatly shorten the preparation time.12)With an intuitive LCD interface and clear button indicator lights to Dimensionssimplify the control of the system.(mm) Appearancee lRear PanelSpecificationsAppendix。
诺瓦星云 V1260 LED 视频控制服务器规格书说明书
V1260LED视频控制服务器诺瓦二合一控制器嵌入式软件V1.0规格书更新记录简介V1260是诺瓦科技自主研发的一款All-in-One产品，集视频处理、视频控制以及LED屏体配置等功能于一体，具备多种类的视频信号接收能力、超高清全4K×2K@60Hz的图像处理能力和发送能力。
V1260可通过网口和光纤口将处理后的视频发送到LED显示屏上。
V1260采用工业级外壳，拥有强大的视频处理和发送能力，可适应复杂的操作环境，被广泛应用于政府、企事业单位及军队指挥中心等多种大型固装场合。
认证CCC。
若该产品无所销往国家或地区的相关认证，请第一时间联系诺瓦星云确认或处理，否则，如造成相关法律风险，客户需自行承担或诺瓦星云有权进行追偿。
特性●拥有完备的视频输入接口1路HDMI 2.0，4路DVI，1路3G-SDI。
●多输出，大带载支持16路网口和4路光纤输出，带载高达1040万像素。
●支持3D功能。
配合3D发射器EMT200和配套3D眼镜，实现3D显示效果。
启用3D后，设备输出带载减半。
●支持HDR输出能够极大地增强显示屏的画质，使画面色彩更加真实生动，细节更加清晰。
●支持个性化的画质缩放支持三种画面缩放模式，包括点对点模式、全屏缩放、自定义缩放。
●多窗口显示支持5窗口任意布局。
●支持OSD−每个场景支持1路OSD画面−最大支持导入存储8张OSD图片−每张OSD图片，最宽16384像素，最高16384像素，并且宽度×高度≤1040W像素−OSD画面支持置顶和置底调节●支持监视输出画面将监视内容通过HDMI发送到显示器显示。
●支持智能控制软件NovaLCT进行操作控制。
●支持场景预设最多可创建10个用户场景作为模板保存，可直接调用，方便使用。
●逐点亮色度校正。
配合NovaLCT和校正平台，对每个灯点的亮度和色度进行校正，有效消除色差，使整屏的亮度和色度达到高度均匀一致，提高显示屏的画质。
同时支持硬件打屏功能。
诺瓦科技LED视频处理器VS1规格书
产品规格书视频处理器VS1 Rev1.1.1 NS160000075VS1 是针对 LED 大屏幕显示系统开发的视频处理器，采用业界顶尖的视频处理芯片，内部 12 位数字处理，图像更清晰、色彩更丰富。
采用Faroudja® DCDI 去隔行视频处理、Faroudja® Real Color® 真彩图像处理、Faroudja® TureLife™ 视频图像增强等技术，完美呈现视频图像。
单机最大输出分辨率 2304x1152，支持自定义分辨率输出；淡入淡出切换效果；PIP，大小位置任意显示；AIAO(Any In Any Out)功能，任意截取任意输出。
功能特性1)VS1 具有完备的视频输入接口，包括 2 路 AV，1 路 VGA，1 路 DVI，1 路HDMI，1 路选配 SDI;2)VS1 是Nova 新一代视频处理器的系列产品，强大的图像处理、专业的图像控制、以及友好的人机界面;3)提供淡入淡出的切换效果，以增强并呈现专业品质的演示画面；4)画中画的位置、大小等均可调节，可以随心所欲的控制；5)一个直观的 LCD 显示界面，清晰的按键灯提示，简化了系统的控制；6)支持高位阶视频输入，10bit/8bit；7)支持自定义分辨率输出，视频最大输出分辨率 2304x1152@60Hz。
图 1 VS1 尺寸图（单位:mm）外观说明前面板双画面功能关闭；双画面开，通道 1 画面置于顶层；双画面开，通道 2 画面置于顶层；部分功能开启，输出图像尺寸为窗口大小；全屏功能开启，输出图像尺寸与输入源大小一致；通道 1 图像截取关，输出为完整图像；通道 1 图像截取开，输出为截取图像；通道 2 图像截取关，输出为完整图像；通道 2 图像截取开，输出为截取图像；图像冻结打开标志，冻结当前输出画面；提示：部分数字菜单可以通过点按数字对应快捷键输入（如，输出设置窗口大小，偏移量等）。
诺瓦科技LED显示屏视频处理器Thunderview_V1规格书
Thunderview_V1SpecificationsVideo ProcessorDocument Version: V1.0.0Document Number: NS160110172Copyright © 2017 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a registered trademark of Xi’an NovaStar Tech Co., Ltd.Statement You are welcome to use the product of Xi’a n NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may m ake improvements and/or changes to this document at any time and without notice. Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions afte r evaluation as soon as possible.http://www.novastar.tech iThunderview_V1Specifications ContentsContents1 Overview (1)2 Features (2)3 Hardware (3)4 Dimensions (5)5 Specifications (6)http://www.novastar.tech iiThunderview_V1Specifications 1 Overview1Overview The Thunderview_V1 is a video processor developed by NovaStar based on thepowerful FPGA processing platform. It is designed with various signal inputs, including 2SDI, 1 DP, 1 CVBS, 1 VGA, 3 HDMI, 1 DVI, and 1 HDBT. It supports input resolutionsup to 4096x2160@60Hz and UHD input and output displays. With low latency and a fastsignal source switching within 0.25 second, it can give you a faster operationexperience.http://www.novastar.techThunderview_V1Specifications 2 FeaturesXI'ANNOVASTARTECH 2 Features ●The Thunderview_V1 has a wide variety of video input ports, including 2 SDI, 1 DP1.2, 1 CVBS, 1 VGA, 2 HDMI2.0, 1 HDMI1.3, 1 DVI, and 1 HDBT. ●Supports input and output resolutions up to 4096x2160@60Hz. ●Thunderview_V1 can scale the input image according to the screen resolution. ●The position and dimension of Picture in Picture (PIP) can be adjusted and controlled as you like. ●Supports 1 S/PDIF, an external independent audio output. ●Multiple Thunderview_V1 units can be cascaded to load a larger screen. ●The Thunderview_V1 system configuration can be done without using computer software. Currently, the configuration can be completed by only rotating one knob and pressing one button. ●The intuitive LCD display interface and clear button light indication simplify the system control. ● Users can control and operate the Thunderview_V1, load the logo file and switchinput sources through web page.http://www.novastar.tech3 HardwareThunderview_V1Specifications3 HardwareFront PanelFigure 3-1 Front panel①Power button②LCD panel③Press the knob to display the m ain m enu or confirm an o ption or o peration.④Shortcut keys of i nput source s election:C orresponds to the input source portson the rear panel.⑤To load the *.p n g file; a f ter the Thunderview_V1is connected to the uppercomputer through the Ethernet cable, it is required to visit to192.168.0.111 configure the IP.⑥To display the PIP menu screen⑦Custom button: Users can set it to be the b lackout,f reeze o r test f unction.⑧To display the scaling menu s creen⑨USB: For MCU upgrade3 Hardware Rear PanelFigure 3-2 Rear panelInput Quantity Function4 Dimensions 4 DimensionsUnit: mm5 Specifications 5 SpecificationsThunderview_V1Specifications5 Specificationshttp://www.novastar.tech 7。
诺瓦科技LED视频处理器VX4S规格书
Specifications LED Video Controller VX4SRev1.0. NS160100070GeneralThe VX4S is a professional LED display controller. Besides the function ofdisplay control, it also features in powerful front end processing, so an externalscalar is no longer needed. With professional interfaces integrated, VX4S withexcellent image quality and flexible image control greatly meet the needs ofthe broadcast industry, Its friendly in user-interface. so that the display to workhas never been as easier and more enjoyable as with VX4S. Feature1) The inputs of the VX4S include CVBS×2, VGA×2, DVI×1, HDMI×1 , DP×1 and SDI×1. They support input resolution up to 1920×1200@60Hz;the input images of VX4S can be zoomed point-to-point according to thescreen resolution;2) Provide seamless high-speed switch and fade-in/ fade-out effect so as tostrengthen and display picture demonstration of professional quality;3) The location and size of PIP can both be adjusted, which can becontrolled at will;4) Adopt the Nova G4 engine; the screen is stable and flicker free withoutscanning lines; the images are exquisite and have a good sense of depth;5) Can implement white balance calibration and color gamut mapping basedon different features of LEDs used by screens to ensure reproduction oftrue colors;6) HDMI/external audio input;7) 10bit/8bit HD video source;8) The loading capacity: 2.3 million pixel;9) Support multiple controller montage for loading huge screen;10) Support Nova's new-generation point-by-point correction technology; thecorrection is fast and efficient;11) Computer software for system configuration is not necessary. The systemcan be configured using one knob and one button. All can be done just byfingers. That's what we called Touch Track!12) Adopt an innovative architecture to implement smart configuration; thescreen debugging can be completed within 30 seconds; greatly shortenthe preparation time on the stage;13) A intuitive LCD display interface and clear button light hint simplify thecontrol of the system.Appearance descriptionFront panelRear PanelTips: In order to improve the user’s experience, the layout of interface may be adjusted a little, The picture is only for reference.Tips：The two USB ( typeA) on front panel and rear panel are both forbidden to connect with PC directly.Specification ParametersAttachment。
诺瓦科技LED视频控台C1规格书
2 特性
双液晶屏的触控设计，用户可以在操作的同时通过控台 C1 上的一个液晶屏观察到 输入源信息状态、Preview 监视状态以及 LED 显示屏上输出结果状态，做到控制 时心中有数、掌控全局。
司 最大支持 16 台设备控制。 公 支持对诺瓦终端视频拼接处理器进行控制。 限 支持屏体拼接，快速拼接，输出画质调整，背景设置，EDID 设置，测试画面，正
路输出到其他显示器上。 RS232 控制接口，用于连接上位机。 针孔复位按键，用于 C1 设备复位重启。
诺瓦 整机规格 西安输入电源
AC 100~240V，50/60Hz
整机功耗
50W
工作温度
60℃
湿度
0%-95%RH
尺寸
541.46 x 649.90 x 204.46 mm
西安诺瓦电子科技有限公 网址：
i
C1 规格书
1 简介
1 简介
简介
西安诺瓦电子科技有限公司 外观
C1 是诺瓦针对终端视频处理产品专门研制的一款控台产品。主要应用于现场舞台控 制。
C1 配备 2 个液晶显示器，一个显示屏用于实现输入多画面预监，另一个显示屏与面板 上的按键搭配使用，可对场景中的图层大小，位置，输入源，输出分辨率，图层边框 和输入源截取进行配置。
重量
Kg（待定）
3
C1 规格书
4 尺寸
4 尺寸
西安诺瓦电子科技有限公司
4
C1 规格书
4 尺寸
西安单诺位：mm瓦电子科技有限公司
5
C1 规格书
5 使用场景
5 使用场景
西安诺瓦电子科技有限公司
声明
欢迎您选用西安诺瓦电子科技有限公司（以下简称诺瓦科技）的产品，如果本文档为您了解和使用产品带来
诺瓦科技LED视频处理器LED视频拼接器VS3用户手册
诺⽡科技LED视频处理器LED视频拼接器VS3⽤户⼿册产品⽤户⼿册多画⾯拼接处理器 VS3声明欢迎您选⽤西安诺⽡电⼦科技有限公司（以下简称诺⽡科技）的产品，如果本⽂档为您了解和使⽤产品带来帮助和便利，我们深感欣慰。
我们在编写⽂档时⼒求精确可靠，随时可能对内容进⾏修改或变更，恕不另⾏通知。
如果您在使⽤中遇到任何问题，或者有好予⽀持，对您提出的建议，我们衷⼼感谢并会尽快评估采纳。
版权本⽂档版权归诺⽡科技所有，未经本公司书⾯许可，任何单位或个⼈不得以任何形式对⽂本内容进⾏复制、摘录等，违者必究。
商标安全声明为避免可能的危险，请按规定使⽤此设备。
如出现损坏，⾮专业⼈⼠请勿擅⾃打开维修，请及时与本公司售后联系。
插座应当装在设备的附近，⽽且应当便于触及到。
多画⾯拼接处理器 VS3 ⽤户⼿册⽬录第⼀章第⼆章第三章窗⼝布局 ..................................................................................................... 7 场景切换..................................................................................................... 7 输⼊设置..................................................................................................... 7 输出设置..................................................................................................... 8 画⾯控制..................................................................................................... 8 ⾼级设置................................ ..................................................................... 8 通讯设置..................................................................................................... 8 第四章配套控制软件.................................................................................. 9 第五章常见问题(10)多画⾯拼接处理器 VS3 ⽤户⼿册1)输⼊源被分为 A、B、C、D 四组，各路输出必须是不同组的信号，也即只有不同组的信号源可以被同时输出。
诺瓦科技LED视频控制器V900用户手册
1
EIA/CEA-861 标准，符合 HDMI-1.3 标准，支持 HDCP
1
最高支持 1080p@60Hz 输入
-3-
V900 用户手册
电气参数
处理器接口及性能指标见下表：
输入接口 接口 CVBS VGA DVI HDMI YPbPr SDI 整机规范 输入电源 整机功耗 工作温度 外形尺寸 重量
数目 分辨率/规格
2
PAL/NTSC
2
VESA 标准，最高支持 1080p@60Hz 输入
1
VESA 标准 （支持 1080i 输入），支持 HDCP
接地：本产品通过电源的地线与大地相连，请确保接地导体的良好接地。
电磁干扰：设备应远离磁铁、马达及变压器。 防潮：请将设备置于干燥、干净的环境中。如有液体浸入，请立即拔掉电 源插头。 远离易燃易爆危险物品。
禁止液体、金属碎片浸入机器内部，以免引起安全事故。
附件
V900 用户手册
电源线一条
DVI 线一条
统配置，所有操作几步即可完成，这就是我们所倡导的“司机点屏”！
V900 是 Nova 新一代控制器的系列产品，强大的图像处理、专业的图像控制、以及 友好的人机界面，使显示屏控制工作从未如此轻松和愉快。
-1-
目录
V900 用户手册
第一章 功能简介 .............................................................................. 2
输入输出接口示意图.......................................................................................... 2 前面板控制显示示意图 ...................................................................................... 3 操作说明 ........................................................................................................... 3 电气参数 ........................................................................................................... 4
诺瓦科技LED显示屏视频处理器N9规格书
ProcessorSpecificationsN9 Multi-Screen Splicing VideoDocument Version: V1.0.0Document Number:Copyright © 2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar).This document is intended to help you understand and use the product. For accuracy and re liability, NovaStar may make improvements and/or changes to this document at any time and without notice. If you experience any problems in use or have any suggestions, please contact us via contact info rmation g ivenin document. We will do our best to sol v e any issues, as well as evaluate and implement any suggestions. Website:www.novastar.techN9 Multi-Screen Video SwitcherSpecificationsi1 Overview1Overview The N9 is a high-performance multi-screen splicing video processor independentlydeveloped by NovaStar. Using high-performance video processing technologies, it iscapable of processing and outputting ultra-high quality images. The N9 also providespowerful video signal receiving capability. It can support 9 inputs and 4 DVI outputs atthe same time. A single N9 can load up to an 8KK screen, and multiple N9 units canbe cascaded for output.The N9 can work with NovaStar's desktop console C1 and make the operation of N9on stage more convenient. It is also equipped with brand-new smart managementsoftware V-Can from NovaStar to provide richer image mosaic effects.Thanks to the powerful capabilities of receiving and processing a variety of videosignals, the N9 can be widely used in various scenarios, such as intermediate andhigh-end rental, stage control, media centers, big conference sites, exhibition sitesand concert control centers.SpecificationsNovaStarTech2 Features2Features● Up to 9 inputs, including 1 × dual-link DP 1.1 (can be replaced by HDMI 1.4, DP 1.1 or dual-link DVI), 2 × HDMI 1.3 (can be replaced by DVI/VGA/CVBS), 4 × DVI, 1 × DP 1.2 and 1 × 3G-SDI.● Up to 7 layers supported at the same time. Max. resolution of each layer: 3840×2160, 7680×1080 or 1920×4320. ● Customized BKG settingsYou can load an image file from the control computer or capture an input source image displayed on the screen as the BKG image. ● Shaped layer, layer mask and color keying supported● Layer cloning and Z-order layer sorting supported ● Input source image cropping supported ● Quick mosaic and custom mosaic ● EDID management supportedSupports custom EDID and standard EDID. ● 4 × DVI mosaic output, 4 × DVI backup output, 1 × HDMI preview output, and 2 × Aux output● Output resolution settable. The mosaic width of 4 outputs can be up to 15360x600.● 4 × single-link mosaic output, or 2 × dual-link mosaic output● Input, PVW, PGM and prompter monitoring supported by MVR connector ●Layer position and size adjustableLayers can be added with borders of custom widths and colors. ●32 presetsA total of 32 user presets can be created and saved as templates which can be used directly and conveniently.●Intuitive color LCD screen and clear button indicator prompt on the front panel, simplifying system control and operation.Specifications Appearance Genlock synchronization and synchronization with any input source supported, achieving output vertical synchronization.3N9 Multi-Screen Video Switcher SpecificationsAppearance3AppearanceFront PanelNovaStarTechCo.,Ltd.Rear PanelXi’anNovaStarTechCo.,Ltd.Xi’anSpecifications4 Dimensions4DimensionsXi’anNovaStarTechCo.,Ltd.Specifications6 SpecificationsUnit: mm5 Applications5ApplicationsXi’anNovaStarTechCo.,Ltd.SpecificationsSpecifications 6 SpecificationsLtd.6Specifications Xi’anLtd. Xi’anXi’anNovaStarTechCo.,Ltd.。
诺瓦科技小间距LED拼接处理器视频切换台N9详细参数说明书中文版
N9多画面视频切换器规格书版权所有 ©2018 西安诺瓦电子科技有限公司。
保留一切权利。
非经本公司书面许可，任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部，并不得以任何形式传播。
商标声明是诺瓦科技的注册商标。
声明欢迎您选用西安诺瓦电子科技有限公司（以下简称诺瓦科技）的产品，如果本文档为您了解和使用产品带来帮助和便利，我们深感欣慰。
我们在编写文档时力求精确可靠，随时可能对内容进行修改或变更，恕不另行通知。
如果您在使用中遇到任何问题，或者有好的建议，请按照文档提供的联系方式联系我们。
对您在使用中遇到的问题，我们会尽力给予支持，对您提出的建议，我们衷心感谢并会尽快评估采纳。
网址：1 概述1 概述N9 是由诺瓦科技自主研发的高性能多画面视频切换器，采用高性能的视频处理技术，可处理和输出超高质量的图像。
N9 具备强大的视频信号接收能力，可同时支持9 路视频源输入，4 路DVI 输出，单机带载可达8KK，并支持多台设备级联输出。
N9 可以搭配桌面控台C1，使现场舞台操作更加便捷。
N9 还配备全新的智能管理软件V-Can，您可以通过该智能软件完成更加丰富的画面拼接效果，更充分地满足您的需求。
N9 的强大的多种类的视频信号接收和处理能力，可被广泛应用于中高端租赁，舞台控制，媒体中心、大型会议现场，展会现场、演唱会（春节晚会）指控中心等多种场景。
2 特性2 特性●支持9 路输入，一路DP1.2，最大支持3840×2160@60Hz，一路SDI 输入，最大支持1920×1080@60Hz 输入，一路双链路输入，支持可更换为Dual link DVI、DP1.1 或HDMI1.4 子卡，最大支持3840×1080@60Hz 输入，6 路1920×1080@60Hz 输入。
●INPUT-1 为双链路输入，可支持更换为其他子卡，最大分辨率3840×1080@60Hz，或者3840×2160@30Hz。
诺瓦科技LED显示屏视频处理器VX4-VX4S用户手册
User's ManualLED Video Controller VX4S/VX4 StatementYou are welcome to use the products from Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as Novastar). It is our great pleasure to offer this manual to help you understand and use the product. We strive for precision and reliability during the compilation of this manual, and the contents of this manual are subject to change without notice. If you have any problem in use or you have any suggestion, please feel free to contact us according to the contact information provided in this manual. We will do our utmost to satisfy your needs. Also, we would like to express our sincere thanks to your suggestions and make assessment as soon as possible for adoption.CopyrightNo part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a registered trademark of NovaStar Tech Co., Ltd.Rev1.1.1 NS160110080Safety StatementTo avoid potential hazards, please use this equipment according to the regulations. In case of damages, non-professionals should not disassemble it for maintenance without permission. Please contact the after-sales department of the company.High voltage danger: The operating voltage of this product is 100-240V AC.Grounding: This production is connected to ground via the ground wire ofpower supply. Please ensure good grounding of grounding conductor.Electromagnetic interference: The device should be kept far away frommagnets, motors and transformers.Moisture proof: Keep the equipment in a dry and clean environment. In caseof liquid immersion, please pull the plug immediately.Keep away from flammable and explosive dangerous goods.Prevent liquids or metal fragments from being immersed into the machineto avoid safety accidents.Contents1 Model description 12 Appearance1Front Panel (1)Rear Panel (2)3 Signal connection 34 Dimension 35 Operating motion instruction 36 Main Interface 47 Operation instruction 5Step1: Input Settings (5)Step2: Screen Settings (5)Setp3: Brightness (7)Setp4: Output Settings (7)Image Mosaic (8)Advanced Settings (9)Factory Reset (15)Communication Settings (15)Language (15)8 Specifications169 FAQ 171 Model descriptionModel Description (input interface type)VX4 DVI×2, VGA×3, CVBS×3, HDMI×1, DP×1VX4S DVI×1, VGA×2, CVBS×2, HDMI×1, DP×1, SDI×1Tips: VX4 has different type and number of interface with VX4S, but their functions and specifications are basically the same. In this manual, VX4 is described as the example.2 AppearanceFront Panel③ :Knob T o press knob means Enter or OK, rotating knob represents selection or adjustment.⑤: Four control keyboard shortcutsPIP: PIP Turn-on/off. The lighting of this key represents the turn-on of PIP; otherwise, PIP is turned off.SCALE: Picture zoom turn-on/turn-off. The lighting of this key represents the turnon of zoom function; otherwise, zoom function is unavailable.MODE: Shortcut menu of loading or storage of display model. The key is light when entering the model or shortcut menu, in case of exiting, the key is not bright.TEST: Shortcut of turn-on/off of testing picture. In case of entering testing picture, the key is bright; otherwise, the key is not bright.⑥:Shortcut keys for switching of 10 signal input source. Short press to set as the mainscreen input source, and long press to set as PIP input source. The key is bright after press when the video source has signal; the key flashes when the input of ④: ESC Escape current operation or selection.video source has no signal. The setting result can be checked while setting on the display screen and OLED screen.⑦: Function keysTAKE: Display switching shortcut key. After short pressing TAKE key, PIP will be opened; if it has been opened, the switching between MAIN and PIP will be realized. Fn: Custom shortcut key.⑧: Flat mouth (Type A, female USB) is USB interface, which connects U disk;Square mouth (Type B female USB) is USB controlling interface, communication with PC.Rear PanelInput SourceAudio Audio InputDP DP InputHDMI HDMI InputCVBS1~CVBS3 3-Channel PAL/NTSC TV composite video InputsDVI -1~DVI-2 2-Channel DVI InputsVGA1~VGA3 3-Channel VGA InputsOutput InterfaceDVI LOOP DVI LOOP OutputMonitor -VGA OUT VGA Monitoring InterfaceMonitor -DVI OUT DVI Monitoring InterfaceLED Out 1、2、3、4 4-Channel LED OutputsControlling InterfaceETHERNET Network Control (Communication with PC, or Access Network)Type B, female USB USB Control (Communication with PC, or Cascade IN) Type A, female USB USB Cascade OUTPowerAC 100-240V ～ 50/60HZ AC Power InterfaceTips:The two USB interfaces ( typeA) on front panel and rear panel are both forbidden to connect with PC directly.3 Signal connectionConnect the required hardware equipment reference with the interface descriptions of the previous chapters.If it is required to control more than one set of VX4, please connect them according to the following figure.4 DimensionVX4 's dimension (Unit:mm)5 Operating motion instructionKnob:③ Press the knob under the main interface to enter the operation interface menu; ③ Rotate the knob to select menu or press the knob under the operation interface ofmenu to select current menu or enter submenu;③ Rotate the knob to adjust the parameter after selecting the menu with parameter;press the knob again for confirmation after adjustment. ESC: Return key, exit current menu or operation.Key lock/unlock: long press knob and ESC key simultaneously.6 Main InterfaceAfter starting the controller, the main interface of OLED display is as follows:NovaStar1921680101024x768@60Hz 1024x768@60Hz1 VGA12 HDMI1 2 3 425%First row: Company name; the name and IP of the product are shown alternately; Second row: Main screen 1; signal source; input source signal format; Third row: PIP 2; signal source; input source signal format; Forth row: Status bar. the meanings of all icons are shown below.LED Output (it is output Port 2 in primary mode currently, andthe backup status is displayed as )PIP is turned offPIP is turned onThe current effect is point-to-point displayIt is “scale down” modeIt is “scale up” modeImage Mosaic is not enabled;Image Mosaic is enabled;It is USB control currentlyIt is network port control currentlyThe current brightness is 25%Sign of press key lock. When this icon appears at the maininterface, it is in locking state for key and knob functions.7 Operation instructionThe functions of VX4 are powerful with very simple operation, and multiple operations can be completed with a knob and a return key. The design of more than one shortcut keys makes operations more efficient.Generally, the LED display can be used normally, and the brightness is moderate after conducting the following four steps:Input settings → Screen settings → Brightness → Output settings. Other menus such as screen control and senior setting can help users better control LED display.See the following section for details of operations.Step1: Input SettingsSet resolution of input source signal. Resolution can be directly set and changed for digital input interfaces DVI, HDMI and DP . Resolution can only be modified with other input methods on input devices.Input resolution can be set in two methods:Method one: Preset Resolution.Selection is made in preset resolution of the controller. If there is no preset resolution, you can select the second method and customize resolution.Brightness25%Screen Settings Input Settings Output SettingsPreset ResolutionCustom ResolutionSet Horizontal Res, Vertical Res and Custom· refresh rate and then select "Apply" and press the knob for application. If the application is not confirmed, custom resolution is Preset ResolutionCustom ResolutionWidth (H) 1920 Height(V) 1080Custom Refresh RateApplyStep2: Screen SettingsThe precondition of Screen setting in shortcut is that the screen must be regular rectangle (not special-shaped), cabinet must be regular rectangle and the size of each cabinet are identical.Step 1 The screen being power-on, if the cabinet is in normal display, enter into Step2; if the cabinet is in abnormal display, first, load the cabinet file, and save it to the receiving card; see detailed operation in Advanced Settings ;Step 2 Return to the “Screen Settings” submenu. Rotate the button to switch tosubmenus of other options respectively to perform configurations, as shown in the following figures:Cabinet Row Qty Cabinet Column Qty Port 1 Cabinet Qty Data Flow （Front View ）Step 3 Set Cabinet Row Qty and Cabinet Column Qty according to the actual situationof the screen;Step 4 Set Port1 Cabinet Qty. The device has some limitations on the cabinet quantityof ports. For details, see precautions for screen settings;Step 5 Set the Data Flow (Front View). Pay attention to precautions for screen settingsc), d) and e) below.Precautions for screen settings:1024x768 1280x1024 1366x768 1440x90060 H z 59.94 H z 50 H z 30 H zBrightness25 %Input Settings Screen Settings Output Settings3 3 4（a）If the number of ports with loads is n (n≤4), the first n-1 ports must load the same number of cabinets, which must also be an integral multiple of the number of cabinet rows or columns and be greater than or equal to the number of cabinets for the nth ports.Example:For example, if port 1, port 2, port 3 have loads, port 1 and port 2 must have the same number of cabinets, which must also be an integral multiple of the number of cabinet rows or columns. Therefore, you only need to set port 1 cabinet Qty according to the actual situation when setting the screen. The number of receiving cards port 3 loads must be smaller than or equal to port 1.（b）In the case of special-shaped cabinets, different cabinet sizes and specialshaped screen, the NovaLCT-Mars software is required to be connected to configure the screen.（c）During Data Flow setting, you can rotate the button to see the effects of different data flow on the screen in real time. If you are satisfied with the effect of current data flow, you must press the button to save the setting. You can press the ESC to exit from the current operation.（d）During Data Flow setting, you must ensure that the data flow of each port is downward in the same direction.（e）During Data Flow setting, you must ensure that Port 1 is the start position of the whole data flow connection.VX4 can load 2.3 million (2048x1152@60Hz) pixels in maximum. The width of lateral load can reach to 3840 pixels in maximum (3840x600@60Hz); the longitudinal load can reach to 1920 pixels in maximum (1920 x1200@60Hz).Setp3: BrightnessReturn to the main menu interface. Press the Knob to select the corresponding value of Brightness. You can rotate the Knob to adjust the value at this time.BrightnessScreen SettingsInput Settings Output Settings 25%BrightnessScreen SettingsInput SettingsOutput Settings25%Setp4: Output SettingsOutput settings are divided into three cases:First one: disable Scaling, i.e., the sizes of output image and input image are the same, and original scale output is used. If the input resolution is smaller than the LED display in one direction, LED display may not become bright in this direction; if the input resolution is greater than the LED display in one direction, the input contents may not be displayed completely in this direction. This option is applicable to the application scenarios requiring point-to-point display. Horizontal offset and vertical offset of images can be set according to the needs, and at this time the displayed contents may move to the left or top at the LED display.At this point [Scaling] is disabled.Second one: Auto Fit At this point [Scaling] is enabled, and [Auto Fit] is enabled. When enabling [Auto Fit], the input contents will be fully zoomed to the size of LED display, and the input contents will be adaptive to the size of LED display. This mode is suitable for full-screen playback of the contents.Third one: Custom Scaling At this point [Scaling] is enabled, while [Auto Fit] is disabled. The following steps should be performed for custom scaling:Step 1 Set the input Capture, i.e., capture part of the interesting screens from one starting point of inputting image and display it on LED display. It is generallyrequired to set Horizontal Res (smaller than or equal to the lateral resolutionof input source), Vertical Res (smaller than or equal to the vertical resolutionof input source), horizontal X and vertical Y.Step 2 Set output window, the size of window is smaller than or equal to the size ofLED display; after setting the window, the images can only be adaptive to the displayed size within the range of window. This option is applicable to the application scenarios requiring reserving border at the LED display or restricting playing area.After setting according to the above two steps, the captured contents will only be input and displayed at the set area on the LED display, as shown below:Image MosaicWhen the display screen is huge, two or more VX4 need to be cascaded for loading the huge screen;Choose the method of Image Mosaic: Equal Division, Unequal Division.③ Equal Division: Each VX4 has same load area. It is only required to set total pixelpoints, rows ,columns of the big screen and the serial No. of each VX4.③ Unequal Division: Each VX4 could have different load area . It is required to set thetotal pixel points and the load area size as well as load area staring position of each VX4.Image Mosaic example: The total number of pixels of LED display is 3000×1000, exceedingthe load capacity of single VX4. Two sets of VX4 are used for Image Mosaic processing. The connection method is shown in the right figure.Scaling Auto FitCustom Scaling Image OffsetEnable DisableInput Source Width(H) Height(V) Start X HDMI 720 Input Capture Output Window240 Start YHeight (V) Start X Start Y600 100 Input Capture Output WindowWidth (H) 800 100Input SourceLED Display(100,100)800600(0 ,0) 720240Please choose Equal Division or Unequal Division while setting detailed parameters. Equal DivisionVX4（1） VX4（2）Total Width Pixels 3000 Total Height Pixels 1000 Mosaic Row Qty 1 Mosaic Column Qty 2Load Area Position1 2 ——————Unequal DivisionAdvanced SettingsSeveral setting options of main functions are included in advanced settings, as shown in the figure below. Operation of each function will be detailed for users in the following text.VX4 （ 1 ） VX4 （ 2 ）Total Width Pixels 3000 Total Height Pixels 1000Load Area Width 1500 1500 Load Area Height 1000 1000 Load Area Start X 0 1500 Load Area Start YControl the turn-on/off of PIP, Set input source of main screen and PIP, as well as parameters of PIP.Layout: the position of PIP relative to main screen, including eight modes of layout such as Custom, Left T op, Left Bottom, Right Top etc. When choosing any mode except Custom , the values of horizontal and vertical offset of PIP are able to adjust to the corresponding values of layout automatically. The meaning of each layout mode is shown below:③Custom refers to that the size and position of PIP need to be set.③Left Top, Left Bottom, Right T op, Right Bottom, Center refer to that PIP overlapswith the top-left corner, bottom-left corner, top-right corner, bottom- right corner and center of main screen.③Top Bottom, Left Right refer to that main screen and PIP are distributed from topto bottom or left to right.Main source/PIP source: Input source switching of main picture and PIP is the same as the role of input source switching on the front panel.Horizontal Res : Horizontal offset of PIPVertical Res : Vertical offset of PIPHorizontal X : Horizontal width of PIPVertical Y : Vertical height of PIPPIP Crop Settings: Picture is cropped from the set starting position and is displayed on PIP and its size is set horizontal width and vertical height.Enable this function and then set horizontal width, vertical height, horizontal X and vertical Y.Transparency: the transparency of PIPWindow Swap: s content of main screen and PIP.The Conflict List of PIP Signal Source（VX4）Input Source of Main ChannelHDMI DVI1DVI2VGA1VGA2VGA3CVBS1CVBS2CVBS3DPPIP Input Source HDMI√×√√√√√√√DVI1√√×√√×√√√DVI2×√√√√√√√√VGA1√×√√√×√√√VGA2√√√√×√√√√VAG3√√√√×√√√√CVBS1√×√×√√√√√CVBS2√√√√√√√×√CVBS3√√√√√√√×√DP√√√√√√√√√HDMIInput Source of Main ChannelHDMIDVIVGA1VGA2CVBS1CVBS2SDIDP PIP Input SourceHDMI ×√√√√√√DVI×√√√√√√ VGA1 √ √× √√√√ VGA2 √ √ ×√√√√ CVBS1 √ √ √ √× √√ CVBS2 √ √ √ √ ×√√SDI√ √ √ √ √ √√ DP√√√√√√√Redundancy Set this controller as primary or backup mode.VGA Auto ADJ ADC Calibration Video Synchronization EnableGo Homepage （s ）60③ so that the VGA picture is clear and complete. Select this menu and then press the knob once and perform VGA automatic adjustment once. (VGA1 does not support this feature)③ ADC calibration: when analog signal accesses, processors that are not calibrated byADC may have defects such as color cast or picture dark. VX4 can automatically make ADC calibration based on input analog signal (including CVBS and VGA) to solve the problems above. Select this menu and then press the knob once and perform ADC calibration once.③ Video Synchronization: allow that the input and output of VX4 are synchronous. ③ Go Homepage(s): The time period during which the system stops at currentinterface and then automatically returns to home screen when there is no operation. The system default value is 60s.PIPRedundancy PresettingsAdvanced AttrPresettingsSave the current configuration parameters as Presettings. The Presettings can be directly loaded next time, and 10 Presettings are saved by default.Custom ButtonFn Settings. The functions of custom button include Black Out, Freeze 、VGA Auto ADJ 、Video Synchronization. Press Fn key to directly conduct the function switch.Audio SettingsControl the enabling /disenabling of Audio, volume and Audio mode.For example, when using the audios input via Audio In port, it is required to enable audios first and then select the Audio mode to be fixed; when using the Audio from HDMI, set the Audio mode to be accompanied after enabling audios and then switch source to HDMI, and the Audio we hear comes from HDMI.Display Control③ Normal: Normally display. Blank Out: The display is blank ③ Freeze: The currentplay lists are frozen.③ Testing Pattern: There are eight kinds of testing screens in total, including pure color and lines.③ Image SettingsContrast, Saturation, Hue, Color Temperature, Red, Green, Blue and Gamma value are set according to the requirements. After they are adjusted to satisfaction, the parameters should be saved.③ Switching Effect:Set the effects when switching screens, including Quick switch,Fade, Shrink Center, Shrink Left Top, Zoom Center, Zoom Left T op and turning off. After selecting the desired effect, it will take effect after pressing the knob.Fn Settings Audio Settings Display Control Inputs BackupAudio Volume Audio ModeEnable 100Normal Black out Freeze Test Pattern Fn Settings Audio Settings Display Control Inputs BackupImage Settings Switching EffectTips: When enabling PIP function, the switching effect will automatically disappear. Only when PIP function is turned off, the special effect function of channel switching can take effect.Inputs BackupTo specify backup for input source and automatically switch to backup source if the signal of input source has faults, which makes it more reliable.HDMI DPIndicating that DP has been set as the backup of HDMI and main inputsource(which cannot be changed) is in left side of the arrow while backup(which can be changed) is in the right side;Both main input source and backup can be customized in Custom mode.Output ResolutionThis function can be used to set the the output resolution of monitoring. Users can set the function according to actual use and choose either Reset Resolution or Custom.Output Resolution Cabinet Settings OLED Brightness 13Hardware VersionV1300Cabinet SettingsLoad Cabinet FilesVX4 is connected with PC. NovaLCT-Mars runs on PC and the cabinet setting previously is imported into controller. 1 ) Save cabinet configuration file.After receiving card is configured, click and save cabinetconfiguration file (.rcfg) to local PC.Preset Resolution Custom ResolutionFn Settings Audio Settings Display Control Inputs BackupBackup Backup 1 Backup 2 Backup 3Enable HDMI VGA1 CVBS1DP SDI VGA2 Custom Backup CVBS2SDILoad RCFG Files Save to RV CardOLED Brightness 13 Hardware VersionV1300Output Resolution Cabinet Settings2 ) Cabinet configuration imported into VX4.Save to RV CardAll current configurations about the recieving card of VX4 are saved into receiving card and will not be lost after power fault.OLED BrightnessAdjust the gray scale of OLED display.3 ) Load Cabinet Files.RG 128×128Load RCFG FilesSave to RV CardHardware VersionView the hardware version of VX4. If new version has been published, LCT-Mars can be connected via PC and the hardware program of VX4 can be upgradedFactory ResetReset to factory default setting.Communication SettingsSet the communication mode and network parameter of VX4.The communication modes include USB priority and LAN (local area network) priority. When VX4 is connected to USB control and LAN control interface simultaneously, USB takes priority in the settings, adopts USB control; otherwise, LAN takes priority in the settings, adopts LAN control.The network parameter can be set both manually and automatically. Ensure that the IP address is not conflict with other equipment when setting parameter manually.LanguageSwitch Language.8 SpecificationsInputNumberPort Resolution SpecificationVX4VX4SVGA 3 2 VESA Standard, support max 1920×1200@60Hz input DVI 2 1 VESA Standard (support 1080i input), support HDCP CVBS 3 2 PAL/NTSCHDMI 1 1EIA/CEA-861 standard, in accordance with HDMI-1.3 standard, support HDCPDP 1 1 VESA StandardSDI 0 1 480i、576i、720P、1080i/P OutputSDI LOOP 0 1 Consistent with DVI input1280×1024@60Hz 1440×900@60Hz 1680×1050@60Hz 1600×1200@60Hz 1600×1200@60Hz – ReducedVGA 1 1 1920×1080@60Hz 2560×816@60Hz2048×640@60Hz 1920×1200@60Hz2304×1152@60Hz 2048×1152@60Hz1024×1280@60Hz 1536×1536@60HzSelf-defined output resolution (Bandwidth DVI 1 1 optimization)Horizontal resolution maximum 3840 pixelsVertical resolution maximum 1920 pixelsConsistent with SDI inputSpecification of complete machineInput Power AC 100-240V, 50/60HzOverall Power Consumption 25WOperating Temperature -20~60℃Size 482.6×251.5×45（mm）Weight 2.55 Kg9 FAQQuestions MethodsLED display is off Inspect whether the power connection is correct and the switch has been turned on;Play the Self test image and confirm whether the connection of LED is correct and works normally;Inspect whether VX4 output has signal and shows blank screen; Inspect whether the mode and parameter of screen configuration are correct;Port Resolution SpecificationVX4VX4SDVI LOOP 1 1Monitoring port output is abnormal Check whether there is image input in input channel and whetherit is correctly displayed;Check whether PIP has been turned on, whether there is signalinput in 2 channel and whether it is correctly displayed;Check whether monitoring output is connected correctly and it is not loose;Please confirm whether Monitor supports the output resolution ofVX4;Try to cut off the power of equipment and restart it, reset VX4 andoperate again;P h a s e o f V G Ainput offsetPerform VGA Auto ADJ; P I P d i s p l a y i sabnormalCheck whether there is signal input in 2 channel and it is normally displayed; Check PIP and confirm whether parameter setting is normal; Fading is abnormalCheck whether Switching effect has been enabled; Image Mosaic isabnormal Check whether the VX4 Image Mosaic switch has been turned on and whether Image Mosaic parameters settings is correct; Checkwhether input signal source is normal;Sound is abnormal Check whether the volume settings is appropriate;Check whether the Audio mode setting is correct;Confirm VX4 is well connected to multifunction card, and thecorresponding output port icon on the main interface has beenhighlighted; confirm whether the audio output mode ofmultifunction card is HDMI mode (it is required to connect LCT forconfirmation and setting);Please preliminarily investigate problems according to the above steps; if you cannot eliminate the problems, please contact the local dealer or our company’s customer service personnel.There is high voltage inside the machine. In order to guarantee your safety, please do not maintain the processor by yourself.。
诺瓦科技LED视频处理器N9规格书
N9多画面拼接视频处理器规格书文档版本：V1.0.0文档编号：版权所有©2018西安诺瓦电子科技有限公司。
保留一切权利。
非经本公司书面许可，任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部，并不得以任何形式传播。
商标声明声明欢迎您选用西安诺瓦电子科技有限公司（以下简称诺瓦科技）的产品，如果本文档为您了解和使用产品带来帮助和便利，我们深感欣慰。
我们在编写文档时力求精确可靠，随时可能对内容进行修改或变更，恕不另行通知。
如果您在使用中遇到任何问题，或者有好的建议，请按照文档提供的联系方式联系我们。
对您在使用中遇到的问题，我们会尽力给予支持，对您提出的建议，我们衷心感谢并会尽快评估采纳。
网址：http://www.novastar-led.c ni多画面视频切换器N9规格书1 简介1简介N9是由诺瓦科技自主研发的高性能多画面拼接视频处理器，采用高性能的视频处理技术，可处理和输出超高质量的图像。
N9具备强大的视频信号接收能力，可同时支持98，并支持多台设备级联输出。
路视频源输入，4路DVI输出，单机带载可达KKN9可以搭配桌面控台C1，使现场舞台操作更加便捷。
N9配备了全新的智能管理软件V-Can，能够实现更加丰富的画面拼接效果。
N9具备强大的多种类视频信号接收和处理能力，可被广泛应用于中高端租赁，舞台控制，媒体中心、大型会议现场，展会现场、演唱会（春节晚会）指控中心等多种场景。
规格书规格书 6 产品规格西安诺瓦电子科技有限公司。
LED地砖屏视频处理器诺瓦科技V900用户手册
西安诺瓦电子科技有限公司尊敬的用户：欢迎您成为 Nova 产品的使用者，如果本手册为您了解和使用产品带来帮助和便利，我们深感欣慰。
我们在编写手册时力求精确可靠，诺瓦会在未通知的情况下随时对手册的内容进行修改和变更。
如果您在使用中遇到任何使用问题，或者您有好的建议，请按照手册提供的联系方式联系我们。
对您在使用中遇到的问题，我们会尽力给予支持，对您提出的建议，我们衷心感谢并尽快评估采纳。
版权本手册版权归西安诺瓦科技所有，任何单位和个人未经书面许可，不得以任何形式对文本内容作复制、摘录。
为避免可能的危险，请按规定使用此设备。
如出现损坏，非专业人士请勿擅自打开维修，请及时与本公司售后联系。
附件安 全须知概述V900 是Nova 专业级的LED 视频控制器，其除了显示屏控制外还具有功能强大的前端视频处理功能。
V900 以优秀的图像质量和灵活的图像控制极大的满足了媒体行业的需求。
V900 具有完备的视频输入接口，包括 2路CVBS ，2路VGA ，1路DVI ，1路HDMI ，1路YPbPr ，1路选配SDI 。
部分接口支持的输入分辨率最高可达1080p@60Hz 。
V900无须通过计算机软件进行系统配置。
现在只需对一个旋钮和一个按钮进行操作即可完成系统配置，所有操作几步即可完成，这就是我们所倡导的“司机点屏”！V900 是Nova 新一代控制器的系列产品，强大的图像处理、专业的图像控制、以及友好的人机界面，使显示屏控制工作从未如此轻松和愉快。
目 录第一章 功能简介........................................... ..1 输入输出接口示意图.............. .....................1 前面板控制显示示意图........... ......................2 操作说明....................... .................... .2 电气参数 ........................ ................... .2 第二章 信号连接............................................ .4 信号连接 ............... ............................ .4 多机连接 ..................... ...................... .4 第三章 菜单操作............................................ .5 主界面 .......................... ................. ...5 输入设置 ........................ ................... .6 快捷点屏........................ ................... . 6 亮度调节........................ .................... 7 输出设置........................ .................... 7 画面控制........................ .................... 9 声音设置........................ ................... 10 高级设置........................ ................... 10 双画面......................................10 拼接带载................. ................... 11 载入箱体配置文件............................12 固化至接收卡............. ...................12 双主控热备份................................12 高级属性....................................12 工厂复位....................................13 预设模版.................................... 13 自定义快捷键................................13 硬件版本....................................13 第四章常见问题......................... . (14)①：电源开关②：操作屏幕主界面（详见后续章节菜单操作 - 主界面）③：旋钮，按下旋钮表示进入，旋转旋钮表示选择或调节④：ESC ，退出当前操作或选项⑤：8 个信号输入源选择快捷键，短按将设置为主画面输入源，长按将设置为画中画的输入源，设置的同时可在操作屏幕上查看设置结果⑥：用于呼出 Fn 键对应的快捷菜单或功能V900 功能强大，操作简单，所有操作都可以通过一个旋钮和一个返回按键完成。
诺瓦科技LED视频处理器LED视频拼接器VS3用户手册
产品用户手册多画面拼接处理器VS3声明 欢迎您选用西安诺瓦电子科技有限公司（以下简称诺瓦科技）的产品，如果本文档为您了解和使用产品带来帮助和便利，我们深感欣慰。
我们在编写文档时力求精确可靠，随时可能对内容进行修改或变更，恕不另行通知。
如果您在使用中遇到任何问题，或者有好的建议，请按照文档提供的联系方式联系我们。
对您在使用中遇到的问题，我们会尽力给予支持，对您提出的建议，我们衷心感谢并会尽快评估采纳。
版权 本文档版权归诺瓦科技所有，未经本公司书面许可，任何单位或个人不得以任何形式 对文本内容进行复制、摘录等，违者必究。
商标是诺瓦科技的注册商标。
安全声明为避免可能的危险，请按规定使用此设备。
如出现损坏，非专业人士请勿擅自打开维修， 请及时与本公司售后联系。
高压危险：本产品的工作电压为 100 ～ 240 V AC 。
接地：本产品通过电源的地线与大地相连，请确保接地导体的良好接地。
电磁干扰：设备应远离磁铁、马达及变压器。
防潮：请将设备置于干燥、干净的环境中。
如有液体浸入，请立即拔掉电 源插头。
远离易燃易爆危险物品。
禁止液体、金属碎片浸入机器内部，以免引起安全事故。
插座应当装在设备的附近，而且应当便于触及到。
多画面拼接处理器 VS3 用户手册目录第一章 功能简介......................................................................................... 1 前面板示意图.............................................................................................. 1 后面板示意图.............................................................................................. 2 电气参数..................................................................................................... 3 第二章 信号连接 .. (4)第三章菜单操作......................................................................................... 5 主界面 ......................................................................................................... 5 主菜单......................................................................................................... 6 屏体设置 ..................................................................................................... 6 窗口布局 ..................................................................................................... 7 场景切换..................................................................................................... 7 输入设置..................................................................................................... 7 输出设置..................................................................................................... 8 画面控制..................................................................................................... 8 高级设置................................ ..................................................................... 8 通讯设置..................................................................................................... 8 第四章 配套控制软件 .................................................................................. 9 第五章常见问题 (10)多画面拼接处理器 VS3 用户手册1)输入源被分为 A、B、C、D 四组，各路输出必须是不同组的信号，也即只有不同组的信号源可以被同时输出。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
安
西
2
视频处理器 VS0 规格书
3 外观
3 外观
司
前面板
公
限
有
序号 按键
功能
技
1 2 3
开关键 OLED 屏 旋钮
设备的开关按键。
科 用于显示设备当前状态，以及设置菜单。 子 主界面下，按下旋钮进入菜单操作界面。
电 菜单操作界面下，旋转旋钮选择菜单，按下旋钮选定当前菜单 或者进入子菜单。
i
视频处理器 VS0 规格书
1 概述
1 概述
司 公 VS0 视频处理器是诺瓦科技推出的一款操作简易，功能丰富的纯硬件设备，支持高清
多类型接口输入，基于强大的视频处理平台，可对输入源进行图像画质调整，为您带
限 来更加灵活的画面构造体验。采用工业级外壳，可适应复杂的操作环境，常用于商
场、酒店、展览展示、电视演播中心等多种场合。
安装 Android 子卡后，Android 播放源模式下，支持使用鼠标和显示器进行控制。
支持输入源一键切换。 支持外置独立音频。
有
支持连接控台设备。
技 支持输入分辨率预设及自定义调节。 科 支持画面全屏缩放、点对点缩放、自定义缩放三种缩放模式。
子 视频输出最大分辨率为 1920×1080@60Hz。
有 技 科 子 电 瓦 诺 安 西
1
视频处理器 VS0 规格书
2 特性
2 特性
司
公 支持多达 4 路输入接口，包括 1 路 DVI，1 路 HDMI1.3，1 路 VGA，1 路 USB 播
放，选配 1 路 Android 子卡。
限 支持窗口位置、大小调整及窗口截取功能。
AUDIO
2
子音频输入和音频输出。
Android 子卡
电 USB
U 盘视频图片文件播放。 连接鼠标。
瓦 （可选子卡）
1
诺 输出接口
WiFi：设备通过 WiFi 模式连接网络。 WiFi/AP
AP：Access Point，提供无线接入。
安接口
数量 说明
西 DVI-D
2
VESA 标准，最高支持 1920×1080@60Hz 视频源输出，
3
视频处理器 VS0 规格书
后面板
指示灯长亮表示有信号源接入且正在使用。 指示灯闪烁表示信号源已接入但无信号源。 指示灯灭表示该信号源未使用。
3 外观
输入接口 接口
数量 说明
司
DVI-D
1
公 VESA 标准，最高支持 1920×1080@60Hz 输入视频源输
入，向下兼容。
HDMI VGA
1 1
HDMI1.3 标准，最大支持 1920×1080@60Hz 分辨率视频源
限 输入，向下兼容。支持 HDCP1.4。 有 最大支持 1920x1080@60Hz 分辨率视频源输入，向下兼容。
USB(Type A) 1
U 盘文件播放。
技 图片文件格式：jpg、jpeg、png 和 bmp。
视 频 文 件 格 式 ： mp4 、 avi 、 mpg 、 mkv 、mov 、 vob 和
连接中控设备。
USB(Type B) 1
程序升级。
4
视频处理器 VS0 规格书
4 尺寸
4 尺寸
司
公
限
有
技
科
子
电
瓦
诺
安
单位：mm
西
5
视频处理器 VS0 规格书
5 应用场景
5 应用场景
西安诺瓦电子科技有限公司
科 rvmb。
子视 频 编 码 ： MPEG-1 、 MPEG-2 、 MPEG-4 、 Sorenson
H263、H.264、HEVC（H.265）、RV8/9/10 和 RV40。
AUDIO
电2
音频输入和输出。
Android 子卡
瓦1 诺 （可选子卡） 安输出接口
USB
U 盘视频图片文件播放。 连接鼠标。
6
视频处理器 VS0 规格书
6 产品规格
6 产品规格
输入接口
接口
数量 说明
DVI-D
1
司 VESA 标准，最高支持 1920×1080@60Hz 输入视频源输
入，向下兼容。
HDMI VGA
1 1
HDMI1.3 标准，最大支持 1920×1080@60Hz 分辨率视频源
公 输入，向下兼容。支持 HDCP1.4。 限 最大支持 1920x1080@60Hz 分辨率视频源输入，向下兼容。
WiFi：设备通过 WiFi 模式连接网络。 WiFi/AP
AP：Access Point，提供无线接入。
西 接口
数量 说明
DVI-D
2
VESA 标准，最高支持 1920×1080@60Hz 视频源输出，
向下兼容，DVI1 和 DVI2 互为复制输出。
控制接口
接口
数量 说明
网口（RS232） 1
当前文件的上一个文件。
VGA：VGA 输入源按键，在 U 盘播放时复用为“ ”，选择播 放当前文件的下一个文件。
USB：外置媒体播放，U
EXT：安卓子卡的 U 盘播放输入源按键。
信号输入源的状态：
-20℃~60℃
1U 标准机箱
6 产品规格
西安诺瓦电子科技有限公司
8
瓦
选定带有参数的菜单后可以通过旋转旋钮调节参数，请注意调 节完成后需要再次按下旋钮进行确认。
4
返回键
诺 5
Scale
安6
输入源
退出当前菜单或操作。 全屏缩放快捷按键。 输入源按键说明：
西
HDMI：HDMI 输入源按键，在 U 盘播放时复用为“ ”，暂停 或播放文件。
DVI：DVI 输入源按键，在 U 盘播放时复用为“ ”，选择播放
支持 2 个 DVI 输出接口复制输出。
支持选配 2 张发送卡，安装时无需拆卸机壳。
电 支持创建 6 个用户场景作为模板保存，可直接调用，方便使用。
前面板直观的 OLED 显示界面，清晰的按键灯提示，简化了系统的控制操作。
诺瓦 安装 Android 子卡后，支持无线投屏，可投放手机或 Pad 画面。
USB(Type A) 1
有 U 盘文件播放。
图片文件格式：jpg、jpeg、png 和 bmp。
技 视频文件格式：mp4、avi、mpg、mkv、mov、vob 和 rvmb。
科 视 频 编 码 ： MPEG-1 、 MPEG-2 、 MPEG-4 、 Sorenson
H263、H.264、HEVC（H.265）、RV8/9/10 和 RV40
向下兼容，DVI1 和 DVI2 互为复制输出。
控制接口
接口
数量 说明
网口（RS232） 1
连接中控设备。
USB(Type B) 1
程序升级。
整机规范
接口
数量 说明
7
视频处理器 VS0 规格书
电源接口 整机功耗 工作温度 尺寸 重量
1
AC100V~240V 50/60Hz。
VS0
视频处理器
西安诺瓦电子科技有限规公格司书
文档版本： 文档编号：
V1.0.0 NS160000237
版权所有 ©2018 西安诺瓦电子科技有限公司。 保留一切权利。 非经本公司书面许可，任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部，并不得以任何形式传 播。
西安诺瓦电子科技有限公司