紧固件图文解说(中英)
紧固件中英文对照表(Terminology for fastener)
非金属嵌件六角锁紧螺母Prevailing torque type hexagon nuts(with non-metallic insert)六角开槽螺母Hexagon slotted nuts六角开槽螺母细牙Hexagon slotted and castle nuts-Fine pitch thread六角螺母Hexagon nuts六角螺母－细牙Hexagon nuts-Fine pitch thread全金属六角锁紧螺母Prevailing torque type all-metal hexagon nuts120度半沉头铆钉120degree oval countersunk rivets120度沉头半空心铆钉120 degree countersunk head semi-tubular rivets120度沉头铆钉120 degree countersunk head rivetsT形槽用螺栓Bolts for T-Slot鞍形弹簧垫圈Curved single coil spring lock washers鞍形弹性垫圈Curved spring washers半圆头带榫螺栓Cup head nib bolts半圆头低方颈螺栓Cup square neck bolts with short neck半圆头方颈螺栓Cup head square neck bolts半圆头铆钉Round head rivets扁平头铆钉Thin head rivets扁圆头半空心铆钉Oval head semi-tubular rivets扁圆头铆钉Flat round head rivets标牌铆钉Rivets for name plate标准型弹簧垫圈Single coil spring lock washers, Normal type波形弹簧垫圈Wave single coil spring lock washers波形弹性垫圈Wave spring washers槽钢用方斜垫圈Square taper washers for slot section槽销Grooved pins侧面带孔圆螺母Round nuts with set pin holes in side沉头半空心铆钉Countersunk head semi-tublar rivets沉头带榫螺栓Flat countersunk nib bolts沉头方颈螺栓Flat countersunk square neck bolts沉头铆钉Countersunk head rivets沉头双榫螺栓Flat countersunk double nib bolts大半圆头带榫螺栓Cup head nib bolts with large head大半圆头方颈螺栓Cup head square neck bolts with large head大扁圆头半空心铆钉Truss head semi-tubuar rivets大扁圆头铆钉Truss head rivets带槽圆螺母Slotted round nuts带孔销Pins with split pin hole带锁圈的螺钉锁紧挡圈Lock rings with screw and circlip单耳止动垫圈Tab washers with log tab弹性圆柱销Spring-type straight pins-Slotted等长双头螺柱Double end studs地脚螺栓Eyelet bolts吊环螺钉Eyebolts蝶形螺母Wing nuts端面带孔圆螺母Round nuts with drilled holes in one face方螺母Square nuts方头凹端紧定螺钉Square set screws with cup point方头长圆柱端紧定螺钉Square set screws with long dog point方头长圆柱球面端紧定螺钉Square set screws with long dog point and rounded end方头倒角端紧定螺钉Square set screws with chamfered end方头短圆柱锥端紧定螺钉Square set screws with short dog point and cone end非金属嵌件六角法兰面锁紧螺母Prevailing torque type hexagon nuts with flange (with non-metallic insert)封闭型扁圆头抽芯铆钉Mushroom head break mandrel closed end blind rivets封闭型沉头抽芯铆钉120 deg flush head break mandrel closed end blind rivets盖形螺母Acorn nuts工字钢用方斜垫圈Square taper washers for I section管状铆钉Pope type rivets滚花薄螺母Knurled nuts滚花高螺母Knurled nut with collar滚花高头螺钉Knurled thumb screws滚花头不脱出螺钉Knurled thumb screws with waisted shank滚花小头螺钉Knurled screws with small head焊接方螺母Square weld nuts焊接六角螺母Hexagon weld nuts环形螺母Lifting nuts活节螺栓Eye bolts机动弧焊用焊接螺柱Weld studs for are welding夹紧挡圈Grip rings开槽半沉头不脱出螺钉Slotted raised countersunk head screws with waisted shank开槽半沉头螺钉Slotted raised countersunk head screws开槽半沉头自攻螺钉Slotted raised countersunk head tapping screws开槽长圆柱端紧定螺钉Slotted set screws with long dog point开槽沉头不脱出螺钉Slotted countersunk head screws with waisted shank开槽沉头螺钉Slotted countersunk head screws开槽沉头自攻螺钉Slotted countersunk head tapping screws开槽盘头螺钉Slotted pan head screws开槽带孔球面圆柱头螺钉Slotted capstan screws开槽盘头螺钉Slotted pan head screws开槽盘头自攻螺钉Slotted pan head tapping screws开槽平端紧定螺钉Slotted set screws with flat point开槽球面大圆柱头螺钉Slotted large raised cheese head screws开槽球面圆柱头轴位螺钉Slotted raised cheese head with shoulder开槽无头轴位螺钉Slotted shoulder screws开槽圆柱端定位螺钉Slotted setscrews with dog point开槽圆柱头螺钉Slotted cheese head screws开槽圆柱头轴位螺钉Slotted cheese head screws with shoulder开槽锥端定位螺钉Slotted setscrews with cone point开口挡圈“E” rings开口垫圈Washers with split开口销Split pins开口型扁圆头抽芯铆钉Mushroom head break mandrel blind rivets开口型沉头抽芯铆钉120 deg flush head break mandrel blind rivets开尾圆锥销Taper pins with split空心铆钉Tubular rivets孔用弹性挡圈Circlips for holes孔用钢丝挡圈Roundwire snap rings for hole扣紧螺母Tight nuts六角法兰面螺母Hexagon nuts with flange六角法兰面自钻自攻螺钉Hexagon flange head self-drilling tapping screws六角头螺栓、弹簧垫圈和平垫圈组合件Hexagon head bolt, single coil spring lock washer and plain washer assemblies六角头螺栓和平垫圈组合件Hexagon head bolt and plain washer assemblies六角头螺栓和外锯齿锁紧垫圈组合件Hexagon head bolt and serrated lock washer external teeth assemblies六角头头部戴槽螺栓Hexagon bolts with slot on head六角头头部带孔螺栓Hexagon blots with wire holes on head六角头自攻螺钉Hexagon head tapping screws六角头自攻螺钉和大垫圈组合件Hexagon head tapping screw and plain washer assemblies六角头自攻锁紧螺钉Hexagon head thread forming screws六角自锁螺母Self-locking nuts, hexagon内齿锁紧垫圈Lock washers internal teeth。
各项紧固件&铜管中英文对比
5.1.4 螺纹法兰threaded flange (screwed flange) 带有螺纹，与管子为螺纹连接的法兰。
5.1.5 松套法兰lapped joint flange (loose flange) 活套在管子上的与翻边短节或焊环组合使用的法兰。
5.1.6 特殊法兰special flange 非圆形的法兰，如菱形法兰、方形法兰等。
5.1.7 异径法兰(大小法兰)reducing flange 与标准法兰连接，但接管公称直径小于该标准法兰接管公称直径的法兰。
5.1.8 全平面法兰flat face flange 密封面与整个法兰面为同一平面的法兰。
5.1.9 凸台面法兰raised face flange 密封面略高出整个法兰面的法兰。
5.1.10 凹凸面法兰male and female face flanges 一对法兰，其密封面，一呈凹型，一呈凸型。
5.1.11 榫槽面法兰tongue and groove face flanges 一对法兰其密封面，一个有榫，一个有与榫相配的槽。
5.1.12 环连接面法兰（环槽面法兰)ring joint face flanges 法兰的密封面为一梯型环槽。
5.1.13 法兰盖（盲法兰）blank flange(blind flange) 与管道端法兰连接，将管道封闭的、带螺栓孔的圆板。
5.2 紧固件fastener 起紧固和连接作用的机械零件。
5.2.1 螺栓bolt 一端有头，一端有螺纹的紧固件，如六角头螺栓等。
5.2.2 螺柱stud 两端或全长均有螺纹的柱形紧固件。
5.2.3 螺母nut 与螺栓或螺柱配合使用，有内螺纹的紧固件，如六角螺母等。
5.2.4 垫圈washer 垫在连接件与螺母之间的零件, 一般为扁平形的金属环。
5.3 垫片gasket 为防止流体泄漏设置在静密封面之间的密封元件。
5.3.1 非金属垫片nonmetallic gasket 用石棉、橡胶、合成树脂等非金属制成的垫片。
紧固件-中英文对照
紧固件-中英文对照No. 英文单词简写中文1 screw scr 螺丝2 nut nut 螺母3 washer wash 垫圈4 head hd 头5 thread thre 螺纹6 coating coat 镀层7 rivet riv 铆钉8 standoff stdoff 内外六角钉9 driver driv 穴10 hexagon hexa 六角11 tooth tooth 齿12 lock lck 锁13 spring spr 弹簧14 wave wave 波浪型15 pitch pitch 牙距16 partial thread PT 半螺纹17 PT PT 一种螺纹形式18 Full Thread FT 全螺纹19 silver silv 银20 cone cone 锥形21 Eco-syn Eco 30度牙的一种螺纹22 Thread Forming TF 自攻螺纹23 Self Tapping self tapp 自切屑螺纹24 pin pin 销25 shaft Shaf 轴26 steel St 铁27 stainless steel SS 不锈钢28 Brass(Cu) Bras(Cu) 铜29 Aluminum AL 铝30 Rubber Rub 橡胶31 machine screw mech scr 机制螺丝32 SEM screw SEM Scr 组合螺丝33 Material material 材料34 Grade GD 等级35 Finish Finish 表面处理36 Point Point 点37 Clamp Clam 夹子38 internal Int 内39 external ext 外40 thickness / 厚度41 length / 长度42 hole / 孔43 Metric Metcric 公制44 DIN / 德标45 ANSI / 美标46 JIS / 日标螺丝相关参数英语对照A: Machine Screw: 机械螺丝B: Tapping Screw: 自攻螺丝(分使用于金属与使用于塑料二种)B-1: Sheet Metal Tapping Screw. (铁板牙自攻螺丝)B-2: Plastic Tapping Screw. ( 塑料用, 自攻螺丝)C: Wooden Screw : 木工螺丝D: Drywall Screw : 水泥墙螺丝常见螺丝材质:a.Low Carbon Steel :低碳钢b. SS-304 : Stainless Steel 304c. SS-302: Stainless Steel 302 :结构韧性较好d. Aluminum 5052 :铝合金5052d. Brass: 黄铜e. Bronze: 青铜f. UNS C11000 Copper: 锑铜Finish Code: 外观处理规格Head Code: 头部外型螺丝型号Drive Code: 头部剖沟,特征型号Length Code: 螺丝长度(mm)A-1: Thread Code: 螺丝型号A-2: Length Code: 螺丝长度:A-3: Drive Code/ 头部剖沟,特征.a. Slotted: 一字( Minus )b. Phillips: 十字( Plus )c. Phil-Slot: 一字/十字d. Hex Scoket: 内六角e. One Way: 单向(只可锁入,不可退出) A-4: Head Code/ 头部外型.a. Flat: 平头(锁入后,顶部与工作件齐平)b. Oval: 色拉头c. Round: 圆头d. Pan: 圆扁头e. Truss: 大圆扁头f. Hex : 六角头A-5: Finish Code/ 外观处理.a. Z: Zine-Plated: 镀锌b. Ni: Ni-Plated: 镀镍c. Tin-Plated: 镀锡d. Zine Plated / Green Iridite: 镀锌绿膜处理.e. Radiant Plated: 镀五彩f. Passivate: 抗氧化处理.g. Alodial Finish: 无外观处理螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punchingDiameter 直径Length 长度各类紧固件标准件产品英语翻译对照插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力车修壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts 不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut 六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角木牙螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts马车螺丝Carriage Bolts环首螺丝Eye Bolts内六角孔螺丝Hex Socket Cap Screws固定螺丝Set Screws螺椿栓Stud Bolts螺旋椿Screw Studs轮壳螺栓Wheel Bolts翼形螺丝Wing Screws自攻螺丝Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts套挂螺丝Toggle Bolts突缘螺丝Flange Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems)大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铝螺丝Aluminum Screws合金钢螺丝Alloy Steel Screws电子螺丝Electronic Screws微小精密螺丝Micro Screws塑料螺丝Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts拇指螺丝Thumb Screws双头牙螺丝Double End Screws Hanger Bolt 车辆(汽车)螺丝、螺帽Automotive Fasteners 航天用螺丝Aerospace Fasteners飞机特殊扣件Source Control Bolts拉栓Blind Bolts面板螺丝Panel Fasteners电梯螺丝Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws铰链螺丝Hinge Screws货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws 链带螺丝Collated Screws水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy 重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws犁壁螺丝Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws 套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed CapNuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts 不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线Copper Alloy Wire线切割线 E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod 线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire 不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢Steel Bar(Hex/Round/Square)转回90度碾线头机90讧evolving Wire Twisting Machine气动拉钉机Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives 成型冲模Header Punches In Various Drives 螺丝打头机Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass) 螺帽模Nut Forming Dies螺帽成型模Nuts Formers特殊零件成型机Parts Forming Maching冲模Punch Dies冲子Punch Pins罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉SpheroidizingBright Annealing Furnace球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator 滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具Tools六角整头模Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd电镀化学原料Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统Iso Quality Assurance System生产管理系统Production Control System物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stainless Steel Hread Rod马达轴承轴心组件Bearing Shaft(Motor)轴承轴心Bearing Shaft开口铆钉Blind Rivets长形拉帽Blind Rivet Nuts拉帽Blind Nuts拉钉Blind Rivets实心梢Clevis Pins And Straight Pins弹片Clips卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter PinsE型环E-Rings膨胀螺栓Expansion Anchor Bolts鸡眼钉Eyelets RivetsR型销Snap Pins闸、锁Latches And Keeper Assembleds其它特殊铆钉Other Specil Rivets销Pins格式管夹、管束Pipe Hanger铆钉Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings中空钉Semi-Tubular Rivet开叉钉Split Drive Anchors弹簧华司Spring Washers弹簧蝴蝶夹Spring Wings不锈钢华司Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉Thread Nails钛合金铆钉Titaium Alloy Rivets管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件Fasteners合金钢工具Alloy Steel Tools螺栓模Bolt Heading Dies手动拉钉钳Hand Riveter船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl)装饰链Decorative Chains自攻螺纹衬套Ensat Threaded Inserts六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet MetalFasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子T-Yoke轮胎链Tire Chains狗链Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains 机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-LowThread Screws不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws。
紧固件中英对照
GB/T 8-1988 方头螺栓C 级Square head bolts--Product grade C3 GB/T 10-1988 沉头方颈螺栓Flat countersunk square neck bolts4 GB/T 11-1988 沉头带榫螺栓Flat countersunk nib bolts5 GB/T 12-1988 半圆头方颈螺栓Cup head square neck bolts6 GB/T 13-1988 半圆头带榫螺栓Cup head nib bolts7 GB/T 15-1988 大半圆头带榫螺栓Cup head nib bolts with large head8 GB/T 22-1976 小六角头导颈螺栓Bolts, small hexagon head with fit neck9 GB/T 23-1976 小六角头螺杆带孔螺栓Bolts, small hexagon head with hole through the shank10 GB/T 24-1976 小六角头螺杆带孔导颈螺栓Bolts, small hexagon head with fit neck and hole through the shank11 GB/T 25-1976 小六角头头部带孔螺栓Bolts, small hexagon head with holes through the head12 GB/T 26-1976 小六角头头部带孔导颈螺栓Bolts, small hexagon head with fit neck and holes through the head13 GB/T 27-1988 六角头铰制孔用螺栓A 和B 级Hexagon fit bolts--Product grade A and B14 GB/T 28-1988 六角头螺杆带孔铰制孔用螺栓A 和B 级Hexagon fit bolts with Split pin hole on shank--Product grade A and B15 GB/T 29.1-1988 六角头头部带槽螺栓A 和B 级Hexagon bolts with slot on head--Product grade A and B16 GB/T 29.2-1988 十字槽凹穴六角头螺栓Cross recessed hexagon bolts with indentation17 GB/T 31.1-1988 六角头螺杆带孔螺栓A 和B 级Hexagon bolts with split pin hole onshank--Product grade A and B18 GB/T 31.2-1988 六角头螺杆带孔螺栓细杆B 级Hexagon bolts with split pin hole onshank--Reduced shank--Product grade B19 GB/T 31.3-1988 六角头螺杆带孔螺栓细牙A 和B 级Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B20 GB/T 32.1-1988 六角头头部带孔螺栓A 和B 级Hexagon bolts with wire holes onhead--Product grade A and B 21 GB/T 32.2-1988 六角头头部带孔螺栓细杆B 级Hexagon bolts with wire holes on head--Reduced shank--Product grade B22 GB/T 32.3-1988 六角头头部带孔螺栓细牙A 和B 级Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B23 GB/T 35-1988 小方头螺栓B 级Square head bolts with small head--Product grade B24 GB/T 37-1988 T 型槽用螺栓Bolts for T-Slot26 GB/T 39-1988 方螺母C 级Square nuts--Product grade C27 GB/T 41-1986 1 型六角螺母C 级Hexagon nuts--Style 1--Product grad C28 GB/T 56-1988 六角厚螺母Hexagon thick nuts30 GB/T 62-1988 蝶形螺母Wing nuts31 GB/T 63-1988 环形螺母Lifting nuts32 GB/T 65-1985 开槽圆柱头螺钉Slotted cheese head screws33 GB/T 67-1985 开槽盘头螺钉Slotted pan head screws34 GB/T 68-1985 开槽沉头螺钉Slotted countersunk head screws35 GB/T 69-1985 开槽半沉头螺钉Slotted raised countersunk head screws36 GB/T 70-1985 内六角圆柱头螺钉Hexagon socket cap head screws37 GB/T 71-1985 开槽锥端紧定螺钉Slotted set screws with cone point38 GB/T 72-1988 开槽锥端定位螺钉Slotted set screws with cone point39 GB/T 73-1985 开槽平端紧定螺钉Slotted set screws with flat point40 GB/T 74-1985 开槽凹端紧定螺钉Slotted set screws with cup point41 GB/T 75-1985 开槽长圆柱端紧定螺钉Slotted set screws withlong dog point42 GB/T 77-1985 内六角平端紧定螺钉Hexagon socket set screws with flat point43 GB/T 78-1985 内六角锥端紧定螺钉Hexagon socket set screws with cone point44 GB/T 79-1985 内六角圆柱端紧定螺钉Hexagon socket set screws with dog point45 GB/T 80-1985 内六角凹端紧定螺钉Hexagon socket set screws with cup point46 GB/T 83-1988 方头长圆柱球面端紧定螺钉Square set screws with long dog point and rounded end47 GB/T 84-1988 方头凹端紧定螺钉Square set screws with cup point48 GB/T 85-1988 方头长圆柱端紧定螺钉Square set screws with long dog point49 GB/T 86-1988 方头短圆柱锥端紧定螺钉Square set screws with short dog point and cone end52 GB/T 91-1986 开口销Split pins53 GB/T 93-1987 标准型弹簧垫圈Single coil spring lock washers--Normal type57 GB/T 95-1985 平垫圈-C 级Plain washers--Product grade C90 GB/T 794-1993 加强半圆头方颈螺栓Strengthened cap head square neck bolts91 GB/T 798-1988 活节螺栓Eye bolts92 GB/T 799-1988 地脚螺栓Eyelet bolts93 GB/T 800-1988 沉头双榫螺栓Flat countersunk double nib bolts94 GB/T 802-1988 组合式盖形螺母Acorn nuts95 GB/T 804-1988 球面六角螺母Hexagon nuts with raised face96 GB/T 805-1988 扣紧螺母Tight nuts97 GB/T 806-1988 滚花高螺母Knurled nut with collar98 GB/T 807-1988 滚花薄螺母Knurled nuts99 GB/T 808-1988 小六角特扁细牙螺母Small hexagon thin nuts-Fine pitch thread100 GB/T 809-1988 嵌装圆螺母Insert round nuts101 GB/T 810-1988 小圆螺母Small round nuts102 GB/T 812-1988 圆螺母Round nuts103 GB/T 815-1988 端面带孔圆螺母Round nuts with drilled holes in one face104 GB/T 816-1988 侧面带孔圆螺母Round nuts with set pin holes in side105 GB/T 817-1988 带槽圆螺母Slotted round nuts106 GB/T 818-1985 十字槽盘头螺钉Cross recessed pan head screws107 GB/T 819-1985 十字槽沉头螺钉Cross recessed countersunk head screws108 GB/T 820-1985 十字槽半沉头螺钉Cross recessed raised countersunk head screws109 GB/T 821-1988 方头倒角端紧定螺钉Square set screws with chamfered end110 GB/T 822-1988 十字槽圆柱头螺钉Cross recessed cheese head serews111 GB/T 823-1988 十字槽小盘头螺钉Cross recessed small pan head screws112 GB/T 824-1976 圆柱头内花键螺钉Screws,fluted socket head113 GB/T 825-1988 吊环螺钉Eyebolts114 GB/T 827-1986 标牌铆钉Rivets for name plate115 GB/T 828-1988 开槽盘头定位螺钉Slotted pan head set setscrews with dog point116 GB/T 829-1988 开槽圆柱端定位螺钉Slotted setscrews with dog point117 GB/T 830-1988 开槽圆柱头轴位螺钉Slotted cheese head screws with shoulder118 GB/T 831-1988 开槽无头轴位螺钉Slotted shoulder screws119 GB/T 832-1988 开槽带孔球面圆柱头螺钉Slotted capstan screws120 GB/T 833-1988 开槽大圆柱头螺钉Slotted large cheese head screws121 GB/T 834-1988 滚花高头螺钉Knurled thumb screws122 GB/T 835-1988 滚花平头螺钉Knurled screws123 GB/T 836-1988 滚花小头螺钉Knurled screws with small head124 GB/T 837-1988 开槽盘头不脱出螺钉Slotted pan head screws with waisted shank125 GB/T 838-1988 六角头不脱出螺钉Hexagon screws with waisted shank126 GB/T 839-1988 滚花头不脱出螺钉Knurled thumb screws with waisted shank127 GB/T 840-1988 塑料滚花头螺钉Plastic diamond knurlhead screws128 GB/T 845-1985 十字槽盘头自攻螺钉Cross recessed pan head tapping screws129 GB/T 846-1985 十字槽沉头自攻螺钉Cross recessed countersunk head tapping screws130 GB/T 847-1985 十字槽半沉头自攻螺钉Cross recessed raised countersunk head tapping screws131 GB/T 848-1985 小垫圈--A 级Plain washers--Small series--Product grade A132 GB/T 849-1988 球面垫圈Weshers with ball face133 GB/T 850-1988 锥面垫圈Washers with cone face134 GB/T 851-1988 开口垫圈Washers with split135 GB/T 852-1988 工字钢用方斜垫圈Square taper washers for I section136 GB/T 853-1988 槽钢用方斜垫圈Square taper washers for slot section137 GB/T 854-1988 单耳止动垫圈Tab washers with long tab138 GB/T 855-1988 双耳止动垫圈Tab washers with long tab and wing139 GB/T 856-1988 外舌止动垫圈External tab washers140 GB/T 858-1988 圆螺母用止动垫圈Tab washers for round nut141 GB/T 859-1987 轻型弹簧垫圈Single coil spring lock washers,Light type142 GB/T 860-1987 鞍形弹性垫圈Curved spring washers143 GB/T 861.1-1987 内齿锁紧垫圈Lock washers internal teeth144 GB/T 861.2-1987 内锯齿锁紧垫圈Serrated lock washers internal teeth145 GB/T 862.1-1987 外齿锁紧垫圈Lock washers external teeth146 GB/T 862.2-1987 外锯齿锁紧垫圈Serrated lock washers external teeth147 GB/T 863.1-1986 半圆头铆钉( 粗制) Round head rivets--Black148 GB/T 863.2-1986 小半圆头铆钉( 粗制) Round head rivets with small head--Black149 GB/T 864-1986 平锥头铆钉( 粗制) Cone head rivets--Black150 GB/T 865-1986 沉头铆钉( 粗制) Countersunk head rivets-Black 151 GB/T 866-1986 半沉头铆钉( 粗制) Oval countersunk head rivets--Black152 GB/T 867-1986 半圆头铆钉Round head rivets153 GB/T 868-1986 平锥头铆钉Cone head rivets154 GB/T 869-1986 沉头铆钉Countersunk head rivets155 GB/T 870-1986 半沉头铆钉Oval countersunk head rivets156 GB/T 871-1986 扁圆头铆钉Flat round head rivets157 GB/T 872-1986 扁平头铆钉Thin head rivets158 GB/T 873-1986 扁圆头半空心铆钉Oval head semi-tubular rivets159 GB/T 874-1986 120°沉头半空心铆钉120 degree countersunk head semi-tubular rivets160 GB/T 875-1986 偏平头半空心铆钉Thin head semi-tubular rivet161 GB/T 876-1986 空心铆钉Tubular rivets162 GB/T 877-1986 开尾圆锥销Taper pins with split163 GB/T 878-1986 螺纹圆柱销Parallel pins with external thread164 GB/T 879-1986 弹性圆柱销Spring-type straight pins—Slotted165 GB/T 880-1986 带孔销Pins with split pin hole166 GB/T 881-1986 螺尾锥销Taper pins with external thread167 GB/T 882-1986 销轴Clevis pins with head168 GB/T 883-1986 锥销锁紧挡圈Lock rings with cone pin169 GB/T 884-1986 螺钉锁紧挡圈Lock ring with screw170 GB/T 885-1986 带锁圈的螺钉锁紧挡圈Lock rings with screw and circlip171 GB/T 886-1986 轴肩挡圈Rings for shoulder172 GB/T 889-1986 1 型非金属嵌件六角锁紧螺母Prevailing torque type hexagon nuts (with non-metallic insert),style 1173 GB/T 891-1986 螺钉紧固轴端挡圈Lock rings at the end of shaft with screw174 GB/T 892-1986 螺栓紧固轴端挡圈Lock rings at the end of shaft with bolt175 GB/T 893.1-1986 孔用弹性挡圈--A 型Circlips for holes--Type A176 GB/T 893.2-1986 孔用弹性挡圈--B 型Circlips for hole--Type B177 GB/T 894.1-1986 轴用弹性挡圈--A 型Circlips for shaft--Type A178 GB/T 894.2-1986 轴用弹性挡圈--B 型Circlips for shaft--Type B179 GB/T 895.1-1986 孔用钢丝挡圈Roundwire snap rings for hole180 GB/T 895.2-1986 轴用钢丝挡圈Roundwire snap rings for shaft 181 GB/T 896-1986 开口挡圈"E" rings182 GB/T 897-1988 双头螺柱bm=1d Double end studs--bm=1d183 GB/T 898-1988 双头螺柱bm=1.25d Double end studs bm=1.25d184 GB/T 899-1988 双头螺柱bm=1.5d Double end studs bm=1.5d185 GB/T 900-1988 双头螺柱bm=2d Double end studs bm=2d186 GB/T 901-1988 等长双头螺柱B 级Double end studs (clamping type)--Product grade B187 GB/T 902.1-1989 手工焊用焊接螺柱Weld studs for manual welding188 GB/T 902.2-1989 机动弧焊用焊接螺柱Weld studs for arc welding189 GB/T 902.3-1989 储能焊用焊接螺柱Weld studs for capacitor discharge welding190 GB/T 921-1986 钢丝锁圈Round wire circlips191 GB/T 922-1986 木螺钉技术条件Specifications for wood screws192 GB/T 923-1988 盖形螺母Acorn nuts193 GB/T 925-1988 轻型六角自锁螺母Self-locking nuts,hexagon light194 GB/T 927-1988 球面六角自锁螺母Self-locking nuts,hexagon sphere195 GB/T 929-1988 单耳托板自锁螺母Self-locking nuts,singlelug, anchor196 GB/T 930-1988 双耳托板自锁螺母Self-locking nuts,twolug, anchor197 GB/T 931-1988 角形托板自锁螺母Self-locking nuts,angle, anchor198 GB/T 932-1988 气密单耳托板自锁螺母Self-locking nuts,singlelug, anchor, sealing,199 GB/T 933-1988 气密双耳托板自锁螺母Self-locking nuts,twolug, anchor, sealing200 GB/T 937-1988 成组游动托板自锁螺母Self-locking nuts, anchor, floating,Gang channel 201 GB/T 938-1988 游动自锁螺母Self-locking nuts, floating202 GB/T 939-1988 单耳托板自锁螺母保护罩Boots for self-locking nuts, singlelug, anchor203 GB/T 940-1988 双耳托板自锁螺母保护罩Boots for self-locking nuts,twolug, anchor204 GB/T 941-1988 角形托板自锁螺母保护罩Boots for self-locking nuts,angle, anchor205 GB/T 943-1988 自锁螺母技术条件Procurement specification for self-locking nuts206 GB/T 945-1976 十字槽球面中柱头螺钉Screws,cross recessed,thin raised cheese head207 GB/T 946-1988 开槽球面圆柱头轴位螺钉Slotted raised cheese head with shoulder208 GB/T 947-1988 开槽球面大圆柱头螺钉Slotted large raised cheese head screws209 GB/T 948-1988 开槽沉头不脱出螺钉Slotted countersunk head screws with waisted shank210 GB/T 949-1988 开槽半沉头不脱出螺钉Slotted raised countersunk head screws with waisted shank211 GB/T 950-1986 十字槽圆头木螺钉Cross recessed round head wood screws212 GB/T 951-1986 十字槽沉头木螺钉Cross recessed countersunk head wood screws213 GB/T 952-1986 十字槽半沉头木螺钉Cross recessed raised countersunk head wood screws 214 GB/T 953-1988 等长双头螺柱C 级Double end studs (clamping type)--Product grade C 215 GB/T 954-1986 120°沉头铆钉120°degree countersunk head rivets216 GB/T 955-1987 波形弹性垫圈Wave spring washers217 GB/T 956.1-1987 锥形锁紧垫圈Countersunk external toothed lock washers218 GB/T 956.2-1987 锥形锯齿锁紧垫圈Countersunk serrated external toothed lock washers 219 GB/T 959.1-1986 挡圈技术条件-- 弹性挡圈Specifications for ring—Circlips220 GB/T 959.2-1986 挡圈技术条件-- 钢丝挡圈Specifications for ring—Round wire snap rings 221 GB/T 959.3-1986 挡圈技术条件-- 切制挡圈Specifications for ring—Cutting rings222 GB/T 960-1986 夹紧挡圈Grip rings223 GB/T 961-1988 单耳托板自锁螺母垫片Spacers for self-locking nuts,singlelug, anchor224 GB/T 962-1988 双耳托板自锁螺母垫片Spacers for self-locking nuts,twolug, anchor225 GB/T 963-1988 角形托板自锁螺母垫片Spacers for self-locking nuts,angle, anchor226 GB/T 973-1976 十字槽扁圆头螺钉Screws,cross recessed,oval head227 GB/T 974-1976 十字槽120°半沉头螺钉Screws,cross recessed,120°raised countersunk head228 GB/T 975-1986 管状铆钉Pipe type rivets229 GB/T 1007-1976 小六角较扁螺母Small hexagon medium thin nuts230 GB/T 1009-1978 螺母专用技术条件Specified specifications for nuts231 GB/T 1011-1986 大扁圆头铆钉Truss head rivets232 GB/T 1012-1986 120°半沉头铆钉120°degree oval countersunk rivets233 GB/T 1013-1986 平锥头半空心铆钉Cone head semi-tubuler rivets234 GB/T 1014-1986 大扁圆头半空心铆钉Truss head semi-tubuar rivets235 GB/T 1015-1986 沉头半空心铆钉Countersunk head semi-tublar rivets236 GB/T 1016-1986 无头铆钉Headless rivets237 GB/T 1017-1978 铆钉专用技术条件Specified specifications for rivets238 GB/T 1021-1976 角形垂直单耳止动垫圈Lock washers with angular upturn tab perpendicular to the lug239 GB/T 1022-1976 角形单耳止动垫圈Lock washers with angular upturn tab in line to the lug240 GB/T 1023-1976 角形垂直外舌止动垫圈Lock washers with angular upturn tab perpendicular to the external tab241 GB/T 1024-1976 角形外舌止动垫圈Lock washers with angular upturn tab in line to the external tab242 GB/T 1030-1988 内球面垫圈Inner sphere washers243 GB/T 1047-1995 管道元件的公称通径Nominal size for pipe components244 GB/T 1048-1990 管道元件公称压力Nominal pressure for pipe components245 GB/T 1095-1979 平键键和键槽的剖面尺寸Parallel keys--Dimensions of cross sections and keyways246 GB/T 1096-1979 普通平键型式尺寸Plain parallel keys--Types and dimensions247 GB/T 1097-1979 导向平键型式尺寸Feather keys--Types and dimensions248 GB/T 1098-1979 半圆键键和键槽的剖面尺寸Semi-circular (Woodruff) keys--Dimensions of cross sections and keyways249 GB/T 1099-1979 半圆键型式尺寸Woodruff keys--Types and dimensions250 GB/T 1144-1987 矩形花键尺寸、公差和检验Straight-sided spline—Dimensions tolerances and verification251 GB/T 1168-1976 螺柱技术条件Studs--Technical requirements252 GB/T 1228-1991 钢结构用高强度大六角头螺栓High strength bolts with large hexagon head for steel structures 253 GB/T 1229-1991 钢结构用高强度大六角螺母High strength large hexagon nuts for steel structures254 GB/T 1230-1991 钢结构用高强度垫圈High strength plain washers for steel structures255 GB/T 1231-1991 钢结构用高强度大六角头螺拴、大六角螺母、垫圈技术条件Specifications of high strength bolts with large hexa-gon head, large hexagon nuts, plain washers for steel structures256 GB/T 1237-1988 紧固件的标记方法Designation system for fasteners257 GB/T 1337-1988 六角自锁螺母Self-locking nuts,hexagon258 GB/T 1338-1988 小六角扁自锁螺母Self-locking nuts,reduced hexagon oblate259 GB/T 1339-1988 小六角自锁螺母Self-locking nuts,reduced hexagon260 GB/T 1340-1988 成组游动托板自锁螺母支架Supports for self-locking nuts,anchor floating,Gang channel261 GB/T 1356-1988 淅开线圆柱齿轮基本齿廓Basic rack tooth profile of involute cylindrical gears262 GB/T 1357-1987 渐开线圆柱齿轮模数Modules of involute cyindrical gears263 GB/T 1563-1979 楔键键和键槽的剖面尺寸Taper keys--Cross section dimensions of keys and keyways264 GB/T 1564-1979 普通楔键型式尺寸Taper keys for general use--Types and dimensions265 GB/T 1565-1979 钩头楔键型式尺寸Gib-head taper keys--Types and dimensions266 GB/T 1566-1979 薄型平键键和键槽的剖面尺寸Thin flat keys--Cross section dimensions and keyways267 GB/T 1567-1979 薄型平键型式尺寸Thin flat keys--Types and dimensions277 GB/T 2672-1986 内六角花形盘头螺钉Hexagon lobular socket pan head screws278 GB/T 2673-1986 内六角花形沉头螺钉Hexagon lobular socket countersunk head screws279 GB/T 2674-1986 内六角花形半沉头螺钉Hexagon lobular socket raised countersunk head screws450 GB/T 5281-1985 内六角圆柱头轴肩螺钉Hexagon socket head shoulder screws451 GB/T 5282-1985 开槽盘头自攻螺钉Slotted pan head tapping screws452 GB/T 5283-1985 开槽沉头自攻螺钉Slotted countersunk head tapping screws453 GB/T 5284-1985 开槽半沉头自攻螺钉Slotted raised countersunk head tapping screws454 GB/T 5285-1985 六角头自攻螺钉Hexagon head tapping screws455 GB/T 5286-1985 螺栓、螺钉和螺母用平垫圈总方案Plain washers for bolts,screws and nuts--General plan456 GB/T 5287-1985 特大垫圈C 级Plain washers--Extra large series--Product grade C510 GB/T 5780-1986 六角头螺栓--C 级Hexagon head bolts—Product grade C511 GB/T 5781-1986 六角头螺栓-- 全螺纹--C 级Hexagon head bolts—Full thread—Product grade C512 GB/T 5782-1986 六角头螺栓--A 和B 级Hexagon head bolts—Product grades A and B513 GB/T 5783-1986 六角头螺栓-- 全螺纹A 和B 级Hexagon head bolts—Full thread—Product grades A and B514 GB/T 5784-1986 六角头螺栓-- 细杆B 级Hexagon head bolts—Reduced shank—Product grade B515 GB/T 5785-1986 六角头螺栓-- 细牙--A 和B 级Hexagon head bolts—Fine pitch thread—Product grades A and B516 GB/T 5786-1986 六角头螺栓细牙全螺纹A 和B 级Hexagon head bolts—Fine pitch thread—Full thread—Product grades A and B517 GB/T 5787-1986 六角法兰面螺栓--B 级Hexagon flange bolts—Product grade B518 GB/T 5788-1986 六角法兰面螺栓-- 细杆--B 级Hexagon flange bolts--Reducedshank--Product grade B519 GB/T 5789-1986 六角法兰面螺栓-- 加大系列--B 级Hexagon flange bolts—Heavy series—Product grade B520 GB/T 5790-1986 六角法兰面螺栓-- 加大系列-- 细杆--B 级Hexagon flange bolts—Heavg eries--Product grade B532 GB/T 6170-1986 1 型六角螺母A 和B 级Hexagon nuts, style 1--Product grades A and B533 GB/T 6171-1986 1 型六角螺母细牙A 和B 级Hexagon nuts, style 1--Fine pitchthread--Product gra des A and B534 GB/T 6172-1986 六角薄螺母A 和B 级倒角Hexagon thin nuts--Product grades A andB--Chamfered535 GB/T 6173-1986 六角薄螺母细牙A 和B 级Hexagon thin nuts--Fine pitch thread--Product grades A and B536 GB/T 6174-1986 六角薄螺母B 级无倒角Hexagon thin nuts--Product gradeB--Unchamfered537 GB/T 6175-1986 2 型六角螺母A 和B 级Hexagon nuts, style 2--Product grades A and B538 GB/T 6176-1986 2 型六角螺母细牙A 和B 级Hexagon nuts, style 2--Fine pitchthread--Product grades A and B539 GB/T 6177-1986 六角法兰面螺母A 级Hexagon nuts with flange--Product grade A540 GB/T 6178-1986 1 型六角开槽螺母A 和B 级Hexagon slotted and castle nuts, style1--Product grades A and B541 GB/T 6179-1986 1 型六角开槽螺母C 级Hexagon slotted nuts, style 1--Product grade C542 GB/T 6180-1986 2 型六角开槽螺母A 和B 级Hexagon slotted and castle nuts,style2--Product grades A and B543 GB/T 6181-1986 六角开槽薄螺母A 和B 级Hexagon thin slotted nuts--Product grades A and B544 GB/T 6182-1986 2 型非金属嵌件六角锁紧螺母Prevailing torque type hexagon nuts (with non-metallic insert), style 2545 GB/T 6183-1986 非金属嵌件六角法兰面锁紧螺母Prevailing torque type hexagon nuts with flange (with non-metallic insert)546 GB/T 6184-1986 1 型全金属六角锁紧螺母Prevailing torque type all-metal hexagon nuts, style 1547 GB/T 6185-1986 2 型全金属六角锁紧螺母Prevailing torque type all-metal hexagon nuts, style 2--Property classes548 GB/T 6186-1986 2 型全金属六角锁紧螺母9 级Prevailing torque type all-metal hexagon nuts, style 2--Property class 9549 GB/T 6187-1986 全金属六角法兰面锁紧螺母Prevailing torque type all-metal hexagon nuts with flange550 GB/T 6188-1986 紧固件用六角花形T 型Hexagon lobular for fasteners--Type T551 GB/T 6189-1986 紧固件用六角花形E 型Hexagon lobular for fasteners--Type E552 GB/T 6190-1986 内六角花形圆柱头螺钉4.8 级Hexagon lobular socket head capscrews--Property class 4.8553 GB/T 6191-1986 内六角花形圆柱头螺钉8.8 级Hexagon lobular socket head capscrews--Property class 8.8562 GB/T 6560-1986 十字槽盘头自攻锁紧螺钉Cross recessed pan head thread forming screws563 GB/T 6561-1986 十字槽沉头自攻锁紧螺钉Cross recessed countersunk head thread forming screws564 GB/T 6562-1986 十字槽半沉头自攻锁紧螺钉Cross recessed raised countersunk head thread forming screws565 GB/T 6563-1986 六角头自攻锁紧螺钉Hexagon head thread forming screws566 GB/T 6564-1986 内六角花形圆柱头自攻锁紧螺钉Hexagon lobular socket thread forming screws573 GB/T 7244-1987 重型弹簧垫圈Single coil spring lock washers, Heavy type574 GB/T 7245-1987 鞍形弹簧垫圈Curved single coil spring lock washers575 GB/T 7246-1987 波形弹簧垫圈Wave single coil spring lock washers587 GB/T 8262-1987 圆头椭圆颈螺栓Bolts,round head with oval neck594 GB/T 9074.1-1988 十字槽盘头螺钉和平垫圈组合件Cross recessed pan head screw and plain washer assemblies595 GB/T 9074.2-1988 十字槽盘头螺钉和外锯齿锁紧垫圈组合件Cross recessed pan head screw and serrated lock washer external teeth assemblies596 GB/T 9074.3-1988 十字槽盘头螺钉和弹簧垫圈组合件Cross recessed pan head screw and single coil spring lock washer assemblies597 GB/T 9074.4-1988 十字槽盘头螺钉, 弹簧垫圈和平垫圈组合件Cross recessed pan head screw,single coil spring lock washer and plain washer assemblies598 GB/T 9074.5-1988 十字槽小盘头螺钉和平垫圈组合件Cross recessed small pan head screw and small plain washer assemblies599 GB/T 9074.6-1988 十字槽小盘头螺钉和大垫圈组合件Cress recessed small pan head serew and big plain washer assemblies600 GB/T 9074.7-1988 十字槽小盘头螺钉和弹簧垫圈组合件Cross recessed small pan head screw and single coil spring lock washer assemblies601 GB/T 9074.8-1988 十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件Cross recessed small pan head screw,single coil spring lock washer and plain washer assemblies602 GB/T 9074.9-1988 十字槽沉头螺钉和锥形锁紧垫圈组合件Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies603 GB/T 9074.10-1988 十字槽半沉头螺钉和锥形锁紧垫圈组合件Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies604 GB/T 9074.11-1988 十字槽凹穴六角头螺栓和平垫圈组合件Cross recessed hexagon bolt with indentation and plain washer assemblies605 GB/T 9074.12-1988 十字槽凹穴六角头螺栓和弹簧垫圈组合件Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies606 GB/T 9074.13-1988 十字槽凹穴六角头螺栓, 弹簧垫圈和平垫圈组合件Cross recessed hexagon bolt with indentation, single coil lock washer and plain washer assemblies607 GB/T 9074.14-1988 六角头螺栓和平垫圈组合件Hexagon head bolt and plain washer assemblies608 GB/T 9074.15-1988 六角头螺栓和弹簧垫圈组合件Hexagon head bolt and single coil spring lock washer assemblies609 GB/T 9074.16-1988 六角头螺栓和外锯齿锁紧垫圈组合件Hexagon head bolt and serrated lock washer external teeth assemblies610 GB/T 9074.17-1988 六角头螺栓, 弹簧垫圈和平垫圈组合件Hexagon head bolt, single coil spring lock washer and plain washer assemblies611 GB/T 9074.18-1988 十字槽盘头自攻螺钉和平垫圈组合件Cross recessed pan head tapping screw and plain washer assemblies612 GB/T 9074.19-1988 十字槽盘头自攻螺钉和大垫圈组合件Cross recessed pan head tapping screw and large plain washer assemblies613 GB/T 9074.20-1988 十字槽凹穴六角头自攻螺钉和平垫圈组合件Cross recessed hexagon head tapping sorew with indentation and plain washer assemblies614 GB/T 9074.21-1988 十字槽凹穴六角头自攻螺钉和大垫圈组合件Cross recessed hexagon head tapping screw with indentation and large plain washer assemblies615 GB/T 9074.22-1988 六角头自攻螺钉和平垫圈组合件Hexagon head tapping screw and plain washer assemblies616 GB/T 9074.23-1988 六角头自攻螺钉和大垫圈组合件Hexagon head tapping screw and big washer assemblies617 GB/T 9074.24-1988 组合件用平垫圈Plain washer for assembly618 GB/T 9074.25-1988 组合件用大垫圈Big plain washer for assembly619 GB/T 9074.26-1988 组合件用弹簧垫圈Single coil spring lock washer for assembly620 GB/T 9074.27-1988 组合件用外锯齿锁紧垫圈Serrated lock washer external teeth for assembly621 GB/T 9074.28-1988 组合件用锥形锁紧垫圈Countersunk external toothed lock washer for assembly622 GB/T 9074.29-1988 自攻螺钉组合件用平垫圈Samll wasner for tapping screw assembly623 GB/T 9074.30-1988 自攻螺钉组合件用大垫圈Big washer for tapping screw assembly808 GB/T 9456-1988 十字槽凹穴六角自攻螺钉Cross recessed hexagon head tapping screws with indentation809 GB/T 9457-1988 1 型六角开槽螺母细牙A 和B 级Hexagon slotted and castle nuts, style l--Fine pitch thread--Product grades A and B810 GB/T 9458-1988 2 型六角开槽螺母细牙A 和B 级Hexagon slotted and castle nuts, style 2--Fine pitch thread--Product grades A and B811 GB/T 9459-1988 六角开槽薄螺母细牙A 和B 级Hexagon thin slotted nuts--Fine pitch thread--Product grades A and B840 GB/T 10432-1989 无头焊钉Headless studs for stud welding841 GB/T 10433-1989 圆柱头焊钉Cheese head studs for stud welding900 GB/T 12615-1990 封闭型扁圆头抽芯铆钉Mushroom head break mandrel closed end blind rivets900 GB/T 12615-1990 封闭型扁圆头抽芯铆钉Mushroom head break mandrel closed end blind rivets922 GB/T 13680-1992 焊接方螺母Square weld nuts923 GB/T 13681-1992 焊接六角螺母Hexagon weld nuts927 GB/T 13806.1-1992 精密机械用紧固件十字槽螺钉Fasteners for fine mechanics--Cross recessed screws928 GB/T 13806.2-1992 精密机械用紧固件十字槽自攻螺钉刮削端Fasteners for fine mechanics--Cross recessed tapping screws--Scrape point937 GB/T 14210-1993 墙板自攻螺钉Dry wall screws972 GB/T 15855.1-1995 扁圆头击芯铆钉Flat round head drive rivets973 GB/T 15855.2-1995 沉头击芯铆钉Countersunk head drive rivets974 GB/T 15855.3-1995 击芯铆钉技术条件Specifications for drive rivets975 GB/T 15856.1-1995 十字槽盘头自钻自攻螺钉Cross recessed pan head self-drilling tapping screws976 GB/T 15856.2-1995 十字槽沉头自钻自攻螺钉Cross recessed countersunk head self-drilling tapping screws977 GB/T 15856.3-1995 十字槽半沉头自钻自攻螺钉Cross recessed raised countersunk head self-drilling tapping screws978 GB/T 15856.4-1995 六角法兰面自钻自攻螺钉Hexagon flange head self-drilling tapping screws991 GB/T 16824.1-1997 六角凸缘自攻螺钉Hexagon head tapping screws with collar992 GB/T 16824.2-1997 六角法兰面自攻螺钉Hexagon flange head tapping screws1005 GB/T 96-1985 大垫圈-A 和C 级Plain washers--Large series--Product grades A and C1006 GB/T 97.1-1985 平垫圈-A 级Plain washers--Normal series--Product grade A1007 GB/T 97.2-1985 平垫圈倒角型-A 级Plain washers--Chamfered--Normal series--Product grade A1008 GB/T 98-1988 止动垫圈技术条件Specification for tab washer1009 GB/T 99-1986 开槽圆头木螺钉Slotted round head wood screws1010 GB/T 100-1986 开槽沉头木螺钉Slotted countersink head wood screws1011 GB/T 101-1986 开槽半沉头木螺钉Slotted raised countersunk head wood screws1012 GB/T 102-1986 六角头木螺钉Hexagon head wood screws1013 GB/T 109-1986 平头铆钉Flat head rivets1014 GB/T 116-1986 铆钉技术条件Specifications for rivet1015 GB/T 117-1986 圆锥销Taper pins1016 GB/T 118-1986 内螺纹圆锥销Taper pins with internal thread1017 GB/T 119-1986 圆柱销Parallel pins1018 GB/T 120-1986 内螺纹圆柱销Parallel pins with internal thread1005 GB/T 96-1985 大垫圈-A 和C 级Plain washers--Large series--Product grades A and C1006 GB/T 97.1-1985 平垫圈-A 级Plain washers--Normal series--Product grade A1007 GB/T 97.2-1985 平垫圈倒角型-A 级Plain washers--Chamfered--Normal series--Product grade A1008 GB/T 98-1988 止动垫圈技术条件Specification for tab washer1009 GB/T 99-1986 开槽圆头木螺钉Slotted round head wood screws1010 GB/T 100-1986 开槽沉头木螺钉Slotted countersink head wood screws1011 GB/T 101-1986 开槽半沉头木螺钉Slotted raised countersunk head wood screws1012 GB/T 102-1986 六角头木螺钉Hexagon head wood screws1013 GB/T 109-1986 平头铆钉Flat head rivets1014 GB/T 116-1986 铆钉技术条件Specifications for rivet1015 GB/T 117-1986 圆锥销Taper pins1016 GB/T 118-1986 内螺纹圆锥销Taper pins with internal thread 1017 GB/T 119-1986 圆柱销Parallel pins1018 GB/T 120-1986 内螺纹圆柱销Parallel pins with internal thread。
最全紧固件中英文对照分析
最全緊固件中英文對照，外貿必備詞典！一、緊固件 Fasteners標準緊固件 Standard Fasteners非標準緊固件 Nonstandard Fasteners特殊緊固件 Special Fasteners汽車緊固件 Automotive Fasteners銅制緊固件 Brass Fasteners航天用緊固件 Aerospace Fasteners精密緊固件 Precision Fasteners化學緊固件 Chemical Fasteners摩托車緊固件 Motorcycle Fasteners不銹鋼緊固件 Stainless Steel Fasteners鐵道緊固件 Railway Fasteners防松緊固件 Self-locking Fasteners高強度緊固件 High strength FastenersPEM緊固件 PEM Fasteners鋼結構緊固件 Steel Structural Fasteners壓鉚緊固件 Self-Clinching Fasteners鋁制緊固件 Aluminum Fasteners鈦合金緊固件 Titanium Alloy Fasteners尼龍緊固件 Nylon Fasteners精制緊固件 Finished Fastener粗制緊固件 Unfinished Fastener螺紋緊固件 Threaded Fastener半精制緊固件 Semi-Finished Fastener抗剪緊固件 Shear Fastener抗拉緊固件 Tension Fastener面板緊固件 Panel Fasteners二、螺栓 Bolts六角頭螺栓Hexagon Head Bolts六角法蘭面螺栓Hexagon Flange Bolts軌道螺栓（魚尾螺絲）Track Bolts高強度螺栓 High Strength Bolts地腳螺栓Eyelet Bolts馬車螺栓 Carriage Bolts護攔螺栓 Guardrail Bots焊接螺栓 Weld Bolts雙頭螺栓 Double End Bolts鋼結構連接副 Structural Bolting內六角螺栓 Hex Socket Bolts合金鋼螺栓 Alloy Steel Bolts方頭螺栓 Square Head Bolts/Square Bolts鉤頭螺栓 Hook Bolts不銹鋼螺栓 Stainless steel Bolts異型螺栓 Special Bolts吊環螺栓 Lifting Eye Bolts汽車螺栓 Automotive Bolts法蘭螺栓 Flange Bolts輪胎螺栓 Wheel BoltsT型螺栓 T Bolts扁頭螺栓 Pan Head Bolts蝶形螺栓 Wing Bolts沉頭螺栓 Countersunk Bolts沉頭方頸螺栓 Countersunk Square Neck Bolts帶榫螺栓 Cup head Nib Bolts沉頭雙榫螺栓 Flat Countersunk Double Nib Bolts活節螺栓 Eye Bolts壓鉚螺栓 Clinching Bolts紅打螺栓 Hot Forging Bolts圓頭螺栓 Round Head Bolts圓頭方頸螺栓 Round Head Square Neck Bolts圓頭雙榫螺栓 Round Head Fin Neck Bolts米制圓頭方頸螺栓 Metric Round Head Square Neck BoltsT型帶孔螺栓 T bolts withHole六角頭鉸制孔用螺栓 Hexagon Fit Bolts六角頭螺桿帶孔螺栓 Hexagon Bolts with split pin hole on shank鋼網架螺栓球節點用高強度螺栓 High Strength Bolts for joints ofspace grid structures 基礎螺栓 Foundation BoltsU型螺栓 U Bolts高張力螺栓 High Strength Bolts大尺寸螺栓 Big Size Bolts螺椿栓 Stud Bolts拉栓 Blind Bolts重型六角頭螺栓 Heavy Hex Bolts大頭馬車螺栓 Step Bolts扭矩控制螺栓 T.C. Bolts蛋形頸軌道用螺栓 Elliptic Neck Track Bolts調節螺栓，調節螺釘 Pitch-Adjustable Bolts and Screws加長非標雙頭螺栓 Lengthen Non-Standard Stud Bolts電梯膨脹螺栓 Elevator Expansion Bolts三、螺釘 Screws六角螺釘Hex Head Cap Screws/Hex Screws六角機械螺釘 Hex Head Machine Bolts六角法蘭螺釘 Hex Flange Screws內六角孔螺絲 Hex Socket Cap Screws內六角沉頭螺釘 Hex Socket Flat Countersunk Head Cap Screws緊定螺釘/固定螺釘 Set Screws止付螺釘Socket Set Screws方頭緊定螺釘 Square Head Slotted Head Set Screws翼形螺釘/蝶形螺釘 Wing Screws精密螺釘 Precision Screws自攻螺釘 Self-Tapping Screws自削螺釘 Thread Cutting Screws鉆尾螺釘 Self-Drilling Screws旋入螺釘 Drive Screws機械螺釘 Machine Screws木螺釘 Wood Screws家具螺釘 Furniture Screws纖維板釘/塑板螺釘 Chipboard Screws墻用螺釘 Drywall Screws剪力釘(焊接螺釘) Welding Studs螺絲附華司組合 Screws And Washers Assembled (Sems)銅螺釘 Brass Screws鋁螺釘 Aluminum Screws合金鋼螺釘 Alloy Steel Screws組合螺釘 SEM screws電子螺釘 Electronic Screws微小精密螺釘 Micro Screws塑料螺釘 Plastic Screws復合材料用螺釘 Particle Board Screws鈦合金螺釘 Titanium Alloy Bolts鈦、鋯、鉬、鈮等螺絲、零件、材料 Ti ,Zr ,Mo, Nb Pare Metal Bolts Parts 拇指螺絲 Thumb Screws飛機特殊扣件 Source Control Bolts電梯螺釘 Elevator Screws四角頭固定螺釘 Square Set Screws單向螺釘 One Way Lag Screws管夾螺釘 Hose Clamp Screws不銹鋼固定螺釘 Stainless Steel Hex Socket Cap Screws不銹鋼內六角螺釘 Stainless Steel Hex Socket Cap Screws鉸鏈螺釘 Hinge Screws貨柜螺釘 Container Screws復合材料鉆尾螺釘 Bi-Metal Self Drilling Screws三角牙螺釘 Tri-lobular Thread Screws高低牙螺釘 High Low Screws夾板用螺釘 Particle Board Screws馬桶螺釘 Toilet Closet Bolts特長螺釘 Special Longer Screws建業螺釘 Building Fasteners不銹鋼六角螺絲 Stainless Steel Hex Socket Cap Screws不銹鋼特殊螺釘 Special Stainless Steel Screws寬牙螺釘（粗牙螺釘） Coarse Thread Screws鏈帶螺釘 Collated Screws水泥螺釘 Concrete Screws板模螺釘 Construction Bolts鋅蝶螺釘 Die Cast Wing Screws; Zinc Alloy重型車釘 Heavy Duty Wheel Hub Bolts內六角固定螺釘 Hex Socket Set Screws復合材料用螺釘（夾板用） Particle Board Screws犁壁螺釘 Plow Bolts不銹鋼木螺絲 Stainless Steel Wood Screws套掛螺栓及螺釘 Toggle Bolts鈦合金膨脹螺釘 Titanium Alloy Expansion Bolts不銹鋼高低牙螺釘 Stainless Steel High-Low Thread Screws不銹鋼機械螺釘 Stainless Steel Machine Screws不銹鋼鉆尾螺釘 Stainless Steel Self Drilling Screws不銹鋼自攻螺釘 Stainless Steel Self Tapping Screws不銹鋼自削螺釘 Stainless Steel Thread Cutting Screws不銹鋼三角牙螺釘 Stainless Steel Tri-Lobular Thread Screws 不銹鋼寬牙螺釘 Stainless Steel Coarse Thread Screws開槽沉頭螺釘 Slotted Flat Countersunk Head Machine Screws 開槽盤頭螺釘 Slotted Pan Head Machine Screws十字槽盤頭螺釘 Cross Recessed Pan Head Machine Screws 滾花頭臺階螺釘 Knurled Thurmb Screws六角頭木螺釘 Hexagon Head Wood Screws平頭滾花螺釘 Knurled Thin Thumb Screws四、螺母/螺帽 Nuts六角螺母 Hexagon Nuts六角蓋形螺母 Hex Cap Nuts六角鋸齒螺母 Hex Serrated Nuts六角法蘭螺母 Hex Flange Nuts六角平面螺母 Hex Flat Nuts六角厚螺母Hex Thick Nuts重型六角開槽螺母 Heavy Hexagon Slotted Nuts高腳螺母 Hex Coupling Nuts (High Nuts)圓螺母 Round Nuts四角螺母/四方螺母 Square Nuts四方焊接螺母 Square Weld Nuts四爪螺母Four-Claw Nuts管用螺母 Pipe Nuts輪殼螺母 Wheel Nuts蝶型螺母 Wing NutsU形螺母 U NutsT形螺母 T Nuts環首螺母 Eye Nuts齒形螺母 Kep Nuts齒花螺母 Clinch Nuts焊接螺帽 Weld Nuts壓鉚螺母 Self-clinching Nuts高張力螺母 High Strength Nuts建業用螺母 Structural Nuts不銹鋼螺母 Stainless Steel Nuts銅螺母 Brass Nuts鋁螺母 Aluminum Nuts合金鋼螺母 Alloy Steel Nuts重型車螺母 Heavy Duty Wheel Hub Nuts鐵器焊接袋帽 Acorn Cap Nuts金屬預置扭矩式螺母 All-Metal Prevailing Torque Type Nuts壁虎螺母 Anchor Nuts大尺寸螺母 Big Size Nuts鐵蓋袋帽 Closed End Acorn Nuts盤形華司螺母 Conical Washer Nuts鐵蓋+尼龍圈組合蓋帽 Din 986 Domed Cap Nuts法蘭尼龍蓋帽 Flange Nylon Insert Lock Nuts平面華司螺母 Flat Washer Nuts六角割溝螺母 Hex Slotted Nuts自鎖螺母 Self-Locking Nuts制止螺母 Sliding NutsSLN-自動防松螺母 SLN Self-Locking Nuts特殊螺母 Special Nuts彈簧螺母 Spring Nuts不銹鋼法蘭螺母 Stainless Steel Flange Nuts不銹鋼六角輪緣尼龍螺母 Stainless Steel Flange Nylon Insert Lock Nuts 不銹鋼六角重型螺母 Stainless Steel Heavy Hex Nuts不銹鋼六角螺母 Stainless Steel Hex Nuts不銹鋼尼龍嵌入螺母 Stainless Steel Nylon Insert Lock Nuts普通六角螺母 Hex Nuts六角重型螺母 Heavy Hex Nuts薄型螺母 Hex Jam Nuts尼龍嵌入防松螺母 Nylon Insert Lock Nuts尼龍鎖緊螺母Nylon Cage Nuts機械螺絲用六角螺母 Hex Machine Screw Nuts米制六角開槽螺母 Metric Slotted Hex Nuts軌道螺栓用方螺母 Track Bolt Nuts米制六角金屬鎖緊螺母 Prevalling Torque Hexagon Nuts開槽螺母Slotted Round Nuts六角開槽薄螺母Hexagon Slotted Thin Nuts五、螺柱 Studs壓鉚螺柱 Self-Clinching Studs銅螺柱 Brass Studs焊接螺柱 Weld Studs雙頭螺柱 Double End Studs六角螺柱 Hex Studs支撐卡柱 Self-Clinching Standoffs六、墊圈 Washers彈簧墊圈 Spring Washers/Spring Lock Washers寬型彈簧墊圈 Extra-duty Helical Spring Lock Washers杯型墊圈 Cup washers波形墊圈 Wave Washers內齒墊圈 Internal Tooth Washers外齒墊圈 External Tooth Washers銅墊圈 Copper Washers方墊圈 Square Washers密封墊圈 Sealing Washers碟形彈簧墊圈 Disc Spring Washers外舌止動墊圈External Tab Washers高強度墊圈 High strengthen washers橡膠墊圈 Rubber Washers鎖緊墊圈 Lock Washers平墊圈 Plain Washers鞍型彈性墊圈 Curved Spring Washers鋸齒鎖緊彈性墊圈 Toothed lock washers外鋸齒鎖緊墊圈 Serrated Lock Washers錐形墊圈 Taper Washers重型彈簧墊圈 Heavy Spring Lock Washers尼龍墊圈 Nylon Washers淬硬鋼墊圈 Hardened Steel Washers七、鉚釘 Rivets平頭鉚釘 Flat Head Rivets擊芯鉚釘 Drive Rivets彩色鉚釘 Colored Rivets沉頭鉚釘 Countersunk Head Rivets半沉頭鉚釘 Oval Countersunk Head Rivets平錐頭鉚釘 Cone Head Rivets抽芯鉚釘 Blind Rivets開口鉚釘 Split Rivets開口型抽芯鉚釘 Open End Blind Rivets拉鉚釘 Pop Rivets封閉鉚釘Closed End Rivets封閉性抽芯鉚釘 Sealed Type Blind Rivets塑料鉚釘 Plastic Rivets空心鉚釘 Tubular Rivets環槽鉚釘 Ring Groove Rivets單鼓型鉚釘 Single-Grip Rivets圓頭鉚釘 Round Head Rivets高沉頭鉚釘 Countersunk Head Rivets鋁鉚釘 Aluminum Rivets實心鉚釘 Solid Rivets沉頭實心鉚釘 Countersunk Head Solid Rivets燈籠鉚釘 Lantern Blind Rivets半空心鉚釘 Semi-Tubular Rivets圓頭半空心鉚釘 Semi-tubular Pan Head Rivets異型鉚釘 Special Rivets不銹鋼鉚釘 Stainless Steel Rivets雙鼓型鉚釘 Multi-grip Rivets高強度鉚釘 High Strength Rivets臺階鉚釘 Step Rivets面板鉚釘 Tablet Rivets開花型抽芯鉚釘 Flowering Blind Rivets拉花型抽芯鉚釘 Peel Type Blind Rivets溝槽型抽芯鉚釘 Grooved Type Blind Rivet鉚接工具 Riveting Tool八、壁虎（膨脹螺栓）Anchors/Expansion Bolts化學錨栓 Chemical Anchors打入式壁虎 Hammer Drive Anchors內迫壁虎 Drop in Anchors重型壁虎 Heavy Duty Anchors錘釘壁虎 Hit Anchors中空壁虎 Hollow Wall Anchors套管壁虎 Sleeve Anchors插片壁虎 Ceiling Anchors門窗、地板專用壁虎 Nylon Frame Anchors or Metal frame Anchors電梯壁虎 Bolt Anchors車修壁虎 Wedge Anchors魚眼壁虎 Tie Wire Anchors外迫壁虎 Cut Anchors塑料膨脹 Plastic Anchors不銹鋼重載脹栓 Heavy Duty Expansion Anchors象腳壁虎 Elephant Foot Anchors長型蘭花夾 Short Strap Anchors九、銷 Pins開口銷 Split Pins圓錐銷 Taper Pins鎖銷 Lock Pins銷軸 Clevis Pins with head槽銷 Grooved Pins彈性銷 Spring Pins圓柱銷 Parallel Pins彈性圓柱銷 Slotted Spring Pins帶孔銷 Pins with split pin hole十、擋圈 Circlips/Rings開口擋圈 E rings孔用擋圈 Circlips for holes軸用鋼絲擋圈 Roundwire Snap Rings for shaft軸肩擋圈Rings for shoulder夾緊擋圈 Grip Rings軸用卡簧 Circlips for shafts帶齒軸用擋圈 Retaining Rings with Lugs for shafts鋼絲鎖圈 Round wire Circlips錐形鎖緊擋圈 Lock Rings with cone pins十一、其他 Others牙條 Threaded Rod沖壓件 Stampings平鍵 Parallel Keys半圓鍵 Woodruff Keys扳手 Spanners鋼絲螺套 Wire Thread Insert自動車床車削件 CNC Turning Parts齒輪 Gears模具 Molds線材盤元 Iron or steel wire rod鉸鏈 Hinge表面處理 Surface Treatment。
常用紧固件相关英语(中英对照)
螺纹大径：Major Diam中径：Pitch diam底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punching1 标准GB （国标）DIN （德制）JIS （日标）ANSI （美标）BA （英制）2 螺纹M. MF (公制牙)UNC.UNF (美制牙)BSW.BSF (英制牙)3 海关编码73181500 螺栓73181600 螺帽73182100 垫圈6-bobes recess 内梅花BO=black oxide 氧化发黑IHH=ind hex head 锯六角头PH=phillips 十字槽sw/fw=split washer/flatwasher 弹垫平垫kep nut 锁紧螺母cementation 渗碳acorn nut 盖形螺母螺丝头型Pan 圆头(盘头)Oval 半沉头H.W.H.. 六角小法兰H.W.F. 六角大法兰CSK 沙拉头(沉头)Large wafer 大扁平头Bugle 喇叭头Truss 盘头带垫Pozi 米制槽Phill 十字槽Serra-tion 垫下带花Flower Head 开花头欧洲标准EN国际标准化组织国际标准化组织标准ISO 国际电工委员会国际电工委员会标准IEC 国际国际电信联盟标准ITU欧共体欧洲电子元器件协会标准CECC德国德国标准DIN英国英国标准BS美国美国国家标准ANSI美国美国材料与试验协会标准ASTM美国美国机械工程师协会标准ASME美国美国电子工业协会标准EIA美国美国连接电子学工业协会标准IPC美国美国焊接协会标准AWS美国美国石油协会标准API美国美国国家公路与运输商协会标准AASHTO美国美国加热制冷与空调工程师协会标准ASHRAE 美国美国电气制造商协会标准NEMA美国美国给水工程协会标准AWWA美国美国仪器、系统与自动化协会标准ISA美国美国保险商实验室标准UL美国电气与电子工程师协会标准IEEE美国美国机动工程师协会标准SAE美国美国腐蚀工程师协会标准NACE美国美国纺织化学师与印染师协会标准AATCC美国美国钢结构油漆标准SSPC美国美国铝协会标准AA美国美国卫生工程协会标准ASSE美国美国煤气协会标准AGA美国美国阀门及配件工业协会标准MSS美国美国音频工程协会标准AES美国美国建筑小五金制造商协会标准BHMA美国美国国家卫生基金会标准NSF美国美国标准NISO,PFI,RWMA美国美国信息与图像管理协会标准AIIM美国美国空调与制冷学会标准ARI美国美国军用标准MIL美国美国防火协会标准NFPA美国美国航空无线电设备标准ARINC美国美国齿轮协会标准AGMA加拿大加拿大标准协会标准CSA加拿大加拿大通用标准局标准CGSB澳大利亚澳大利亚国家标准AS德国德国工程师协会标准VDI欧共体欧洲电信标准ETSI法国法国标准NF日本日本工业标准JIS中国国家标准GB中国机械工业标准JB 中国电子工业标准SJ。
常用紧固件相关英语(中英对照).
螺纹大径:Major Diam中径:Pitch diam底径:Minor diam通止规:Go/No go gage机械性能:mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢,防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料:Raw material球化退火:Annealing冷拔:Drawing冷镦:Forming机加工:Machining螺纹成型:Roll Threading热处理:heat-treatment表面处理:finish去氢:Lustrating hydrogen检验:Inspection包装:Packing入库:Stocking车床:lathe磨制:grinding红打:hot forging冲压:punching1 标准GB (国标DIN (德制JIS (日标ANSI (美标BA (英制2 螺纹M. MF (公制牙UNC.UNF (美制牙BSW.BSF (英制牙3 海关编码73181500 螺栓73181600 螺帽73182100 垫圈6-bobes recess 内梅花BO=black oxide 氧化发黑IHH=ind hex head 锯六角头PH=phillips 十字槽sw/fw=split washer/flatwasher 弹垫平垫kep nut 锁紧螺母cementation 渗碳acorn nut 盖形螺母螺丝头型Pan 圆头(盘头Oval 半沉头H.W.H.. 六角小法兰H.W.F. 六角大法兰CSK 沙拉头(沉头Large wafer 大扁平头Bugle 喇叭头Truss 盘头带垫Pozi 米制槽Phill 十字槽Serra-tion 垫下带花Flower Head 开花头欧洲标准EN国际标准化组织国际标准化组织标准ISO 国际电工委员会国际电工委员会标准IEC 国际国际电信联盟标准ITU欧共体欧洲电子元器件协会标准CECC德国德国标准DIN英国英国标准BS美国美国国家标准ANSI美国美国材料与试验协会标准ASTM美国美国机械工程师协会标准ASME美国美国电子工业协会标准EIA美国美国连接电子学工业协会标准IPC美国美国焊接协会标准AWS美国美国石油协会标准API美国美国国家公路与运输商协会标准AASHTO美国美国加热制冷与空调工程师协会标准ASHRAE 美国美国电气制造商协会标准NEMA美国美国给水工程协会标准AWWA美国美国仪器、系统与自动化协会标准ISA美国美国保险商实验室标准UL美国电气与电子工程师协会标准IEEE美国美国机动工程师协会标准SAE美国美国腐蚀工程师协会标准NACE美国美国纺织化学师与印染师协会标准AATCC美国美国钢结构油漆标准SSPC美国美国铝协会标准AA美国美国卫生工程协会标准ASSE美国美国煤气协会标准AGA美国美国阀门及配件工业协会标准MSS美国美国音频工程协会标准AES美国美国建筑小五金制造商协会标准BHMA 美国美国国家卫生基金会标准NSF美国美国标准NISO,PFI,RWMA美国美国信息与图像管理协会标准AIIM美国美国空调与制冷学会标准ARI美国美国军用标准MIL美国美国防火协会标准NFPA美国美国航空无线电设备标准ARINC美国美国齿轮协会标准AGMA加拿大加拿大标准协会标准CSA加拿大加拿大通用标准局标准CGSB澳大利亚澳大利亚国家标准AS德国德国工程师协会标准VDI欧共体欧洲电信标准ETSI法国法国标准NF日本日本工业标准JIS中国国家标准GB中国机械工业标准JB 中国电子工业标准SJ。
紧固件常识大全中英文对照
第一章 产品分类螺丝（Bolt / Screw）一、外六角螺栓/螺丝（Hex Head Cap Bolt / Screw---HCS）二、内六角螺丝（Socket Head Cap Screw---SHCS）1. 圆柱头内六角螺丝（Socket Head Cap Screw---SHCS）2. 半圆头内六角螺丝（Button Head Socket Cap Screw---BH SHCS）3. 平头/沉头内六角螺丝（Flat Head Socket Cap Screw---FH SHCS）4. 低头内六角螺丝（Low Head Socket Cap Screw---LH SHCS）三、内六角紧定螺钉（Socket Set Screw---SSS）1. 内六角平端紧定螺钉（Socket Set Screw with Die / Flat Point---SSS FT）2. 内六角球面紧定螺钉（Socket Set Screw with Round Point---SSS RD）3. 内六角锥端紧定螺钉（Socket Set Screw with Cone Point---SSS CN）4. 内六角凹端紧定螺钉（Socket Set Screw with Cup Point---SSS CP）5. 内六角滚花凹端紧定螺钉（Socket Set Screw with Knurled Cup Point---SSS KNL)6. 内六角长圆柱端紧定螺钉（Socket Set Screw with Full Dog Point---SSS DOG）7. 内六角短圆柱端紧定螺钉（Socket Set Screw with Half Dog Point---SSS ½ DOG）四、内六角圆柱头轴肩螺钉（Socket Shoulder Screw）五、方头螺栓（Square Head Bolts---SQHD）六、马车螺栓（Carriage Bolt---CB）七、吊环螺栓（Eye Bolt）八、U型螺栓（U Bolt）九、牙条（Stud---14”以下/ Threaded Rod）十、机螺丝（Machine Screw---MS）常见头型：1. 圆头机螺丝（Round Head Machine Screw---RH MS）2. 平头/沉头机螺丝（Flat Head Machine Screw---FH MS）3. 盘头机螺丝（Pan Head Machine Screw---PH MS）4. 大扁头机螺丝（Truss Head Machine Screw---TH MS）5. 半沉头机螺丝（Oval Head Machine Screw）6. 圆柱头机螺丝（Cheese Head Machine Screw）7. 六角头带垫片螺丝（Hex Washer Head Screw）常见槽型：1. 一字槽（Slotted）2. 十字槽（Philips）3. 米字槽（Posidriv）4. 梅花槽（Torx）十一、自攻钉（Tapping Screw）常见头型：1. 盘头（Pan Head）2. 沉头（Flat Head）3. 半沉头（Oval Head）常见牙型：1. A型（Type A）2. B型（Type B）3. AB型（Type AB）4. 三角形（Trilobe / Thread Rolling）5. 17型（Type 17）6. F型（Type F）7. 23型（Type 23）8. 25型（Type 25）十二、自钻钉（Self-Drilling Screw）螺母（Nut）一、六角螺母（Finished Hex Nut---FHN）二、重型六角螺母（Heavy Hex Nut）三、六角开槽螺母（Slotted Hex Nut）四、皇冠螺母（Hex Castle Nut）五、盖形螺母（Acorn Nut）六、蝶形螺母（Wing Nut）七、方形螺母（Square Nut）八、齿形螺母（K-Lock Nut / Keps Nut）九、六角薄螺母（Hex Jam Nut）十、法兰螺母（Serrated Hex Flange Nut）十一、尼龙锁紧螺母（Nylon Insert Lock Nut）十二、顶部锁紧螺母（Top Lock Nut）垫片（Washer）一、平垫片（Flat Washer---F/W）二、弹簧垫片（Spring Lock Washer---L/W）三、齿形垫片（Toothed Lock Washer）1. 外齿垫片（External Tooth Lock Washer---EXT L/W）2. 内齿垫片（Internal Tooth Lock Washer---INT L/W）3. 内外齿垫片（Combination Tooth Lock Washer---INT/EXT L/W）销子（Pin）一、圆柱销（Dowel Pin）二、弹性销（Spring Pin）三、开口销（Cotter Pin）四、锥形销（Taper Pin）铆钉（Rivet）一、圆头铆钉（Button Head Rivet）二、凸缘铆钉（Flange Head Rivet）三、沉头铆钉（Countersunk Head Rivet）四、闭端式铆钉（Closed-End Head）第二章 产品性能等级标记英制螺栓/螺丝/牙条性能等级：等级标记性能等级英文缩写中文简称产品名称SAE J429 Grade 2Gr. 2 2级螺栓/螺丝ASTM A307 Grade307A 307A 螺栓/螺丝ASAE J429 Grade 5Gr. 5 5级螺栓/螺丝ASTM A449 Type 1ASTM A354Gr. BD BD级螺栓/螺丝Grade BDSAE J429 Grade 8Gr. 8 8级螺栓/螺丝ASTM A193Grade B7 Gr. B7 B7 牙条/螺丝 (合金钢）ASTM A193Grade B7M Gr. B7M B7M 牙条 (合金钢）ASTM A193Grade B8 Gr. B8 B8 牙条 (304不锈钢）ASTM A193Grade B8M Gr. B8M B8M 牙条 (316不锈钢）英制螺母性能等级：等级标记性能等级英文缩写中文简称产品名称ASTM A563Grade A Gr. A A级螺母ASTM A563Grade C Gr. C C级螺母ASTM A563Grade DH Gr. DH DH级螺母SAE J995 Grade 5 Gr. 5 5级螺母SAE J995 Grade 8 Gr. 8 8级螺母ASTM A194Grade 2H Gr. 2H 2H级螺母ASTM A194Grade 2HM Gr. 2HM2HM级螺母公制螺栓/螺丝性能等级：等级标记性能等级英文缩写中文简称产品名称Class 4.8 CL 4.8 4.8级螺栓/螺丝Class 5.8 CL 5.8 5.8级螺栓/螺丝Class 8.8 CL 8.8 8.8级螺栓/螺丝Class 9.8 CL 9.8 9.8级螺栓/螺丝Class 10.9 CL 10.9 10.9级螺栓/螺丝Class 12.9 CL 12.9 12.9级螺栓/螺丝公制螺母性能等级：等级标记性能等级英文缩写中文简称产品名称Class8 CL 8 8级螺母Class10 CL 10 10级螺母Class12CL 12 12级螺母英制产品性能等级标记：性能等级 产品 产品尺寸 in. 是否有等级标记 A307 Gr. A Bolts, Screws, Studs 1/4 to 4 是A307 Gr. B Bolts, Screws, Studs 1/4 to 4 是SAE Gr. 1 Bolts, Screws, Studs 1/4 to 1-1/2 否SAE Gr. 2 Bolts, Screws, Studs 1/4 to 3/4 否SAE Gr. 5 Bolts, Screws, Studs 1/4 to 1-1/2 是A449 Type 1 Bolts, Screws, Studs 1/4 to 3 是A325 Type 1 Bolts, Screws, Studs 1/2 to 1-1/2 是SAE Gr. 5.2 Bolts, Screws, Studs 1/4 to 1 是A449 Type 2 Bolts, Screws, Studs 1/4 to 2 是A325 Type 3 Bolts, Screws, Studs 1/2 to 1-1/2 是SAE Gr. 8 Bolts, Screws, Studs 1/4 to 1-1/2 是A354 Gr. BD Bolts, Screws, Studs 1/4 to 4 是A490 Type 1 Bolts, Screws, Studs 1/2 to 1-1/2 是SAE Gr. 8.2 Bolts, Screws, Studs 1/4 to 1 是A490 Type 3 Bolts, Screws, Studs 1/2 to 1-1/2 是 A193Studs ≥ 3/8 是 B7/B7M/B8/B8M Bolts ≥ 1/4 是A194 2H/2HM Nuts ≥ 1/4 是Studs > 3/8 是 F593Bolts ≥ 1/4 是 A563 Gr. C/C3 Heavy Hex Nuts ≥ 1/4 是A563 Gr. D/DH Nuts ≥ 1/4 是公制产品性能等级标记：性能等级 产品 产品尺寸 mm 是否有等级标记 4.6/4.8/5.8/8.8/Hex Bolts/Screws ≥ 5 是9.8/10.9/12.98.8及其以上 Socket/Torx Head Cap Screws≥ 5 是8.8及其以上 Carriage Bolts ≥ 5 是5.6/8.8及其以上 Studs ≥ 5 是4/5/6/8/9/10/12 Nuts ≥ 5 是对于螺栓/螺丝的等级标记应打在头部顶面，螺柱/牙条的等级标记应打在拧入螺母端或无螺纹杆部，螺母的等级标记应打在螺母支撑面上。
最全紧固件中英文对照资料
最全緊固件中英文對照，外貿必備詞典！一、緊固件 Fasteners標準緊固件 Standard Fasteners非標準緊固件 Nonstandard Fasteners特殊緊固件 Special Fasteners汽車緊固件 Automotive Fasteners銅制緊固件 Brass Fasteners航天用緊固件 Aerospace Fasteners精密緊固件 Precision Fasteners化學緊固件 Chemical Fasteners摩托車緊固件 Motorcycle Fasteners不銹鋼緊固件 Stainless Steel Fasteners鐵道緊固件 Railway Fasteners防松緊固件 Self-locking Fasteners高強度緊固件 High strength FastenersPEM緊固件 PEM Fasteners鋼結構緊固件 Steel Structural Fasteners壓鉚緊固件 Self-Clinching Fasteners鋁制緊固件 Aluminum Fasteners鈦合金緊固件 Titanium Alloy Fasteners尼龍緊固件 Nylon Fasteners精制緊固件 Finished Fastener粗制緊固件 Unfinished Fastener螺紋緊固件 Threaded Fastener半精制緊固件 Semi-Finished Fastener抗剪緊固件 Shear Fastener抗拉緊固件 Tension Fastener面板緊固件 Panel Fasteners二、螺栓 Bolts六角頭螺栓Hexagon Head Bolts六角法蘭面螺栓Hexagon Flange Bolts軌道螺栓（魚尾螺絲）Track Bolts高強度螺栓 High Strength Bolts地腳螺栓Eyelet Bolts馬車螺栓 Carriage Bolts護攔螺栓 Guardrail Bots焊接螺栓 Weld Bolts雙頭螺栓 Double End Bolts鋼結構連接副 Structural Bolting內六角螺栓 Hex Socket Bolts合金鋼螺栓 Alloy Steel Bolts方頭螺栓 Square Head Bolts/Square Bolts鉤頭螺栓 Hook Bolts不銹鋼螺栓 Stainless steel Bolts異型螺栓 Special Bolts吊環螺栓 Lifting Eye Bolts汽車螺栓 Automotive Bolts法蘭螺栓 Flange Bolts輪胎螺栓 Wheel BoltsT型螺栓 T Bolts扁頭螺栓 Pan Head Bolts蝶形螺栓 Wing Bolts沉頭螺栓 Countersunk Bolts沉頭方頸螺栓 Countersunk Square Neck Bolts帶榫螺栓 Cup head Nib Bolts沉頭雙榫螺栓 Flat Countersunk Double Nib Bolts活節螺栓 Eye Bolts壓鉚螺栓 Clinching Bolts紅打螺栓 Hot Forging Bolts圓頭螺栓 Round Head Bolts圓頭方頸螺栓 Round Head Square Neck Bolts圓頭雙榫螺栓 Round Head Fin Neck Bolts米制圓頭方頸螺栓 Metric Round Head Square Neck BoltsT型帶孔螺栓 T bolts withHole六角頭鉸制孔用螺栓 Hexagon Fit Bolts六角頭螺桿帶孔螺栓 Hexagon Bolts with split pin hole on shank鋼網架螺栓球節點用高強度螺栓 High Strength Bolts for joints ofspace grid structures 基礎螺栓 Foundation BoltsU型螺栓 U Bolts高張力螺栓 High Strength Bolts大尺寸螺栓 Big Size Bolts螺椿栓 Stud Bolts拉栓 Blind Bolts重型六角頭螺栓 Heavy Hex Bolts大頭馬車螺栓 Step Bolts扭矩控制螺栓 T.C. Bolts蛋形頸軌道用螺栓 Elliptic Neck Track Bolts調節螺栓，調節螺釘 Pitch-Adjustable Bolts and Screws加長非標雙頭螺栓 Lengthen Non-Standard Stud Bolts電梯膨脹螺栓 Elevator Expansion Bolts三、螺釘 Screws六角螺釘Hex Head Cap Screws/Hex Screws六角機械螺釘 Hex Head Machine Bolts六角法蘭螺釘 Hex Flange Screws內六角孔螺絲 Hex Socket Cap Screws內六角沉頭螺釘 Hex Socket Flat Countersunk Head Cap Screws緊定螺釘/固定螺釘 Set Screws止付螺釘Socket Set Screws方頭緊定螺釘 Square Head Slotted Head Set Screws翼形螺釘/蝶形螺釘 Wing Screws精密螺釘 Precision Screws自攻螺釘 Self-Tapping Screws自削螺釘 Thread Cutting Screws鉆尾螺釘 Self-Drilling Screws旋入螺釘 Drive Screws機械螺釘 Machine Screws木螺釘 Wood Screws家具螺釘 Furniture Screws纖維板釘/塑板螺釘 Chipboard Screws墻用螺釘 Drywall Screws剪力釘(焊接螺釘) Welding Studs螺絲附華司組合 Screws And Washers Assembled (Sems)銅螺釘 Brass Screws鋁螺釘 Aluminum Screws合金鋼螺釘 Alloy Steel Screws組合螺釘 SEM screws電子螺釘 Electronic Screws微小精密螺釘 Micro Screws塑料螺釘 Plastic Screws復合材料用螺釘 Particle Board Screws鈦合金螺釘 Titanium Alloy Bolts鈦、鋯、鉬、鈮等螺絲、零件、材料 Ti ,Zr ,Mo, Nb Pare Metal Bolts Parts 拇指螺絲 Thumb Screws飛機特殊扣件 Source Control Bolts電梯螺釘 Elevator Screws四角頭固定螺釘 Square Set Screws單向螺釘 One Way Lag Screws管夾螺釘 Hose Clamp Screws不銹鋼固定螺釘 Stainless Steel Hex Socket Cap Screws不銹鋼內六角螺釘 Stainless Steel Hex Socket Cap Screws鉸鏈螺釘 Hinge Screws貨柜螺釘 Container Screws復合材料鉆尾螺釘 Bi-Metal Self Drilling Screws三角牙螺釘 Tri-lobular Thread Screws高低牙螺釘 High Low Screws夾板用螺釘 Particle Board Screws馬桶螺釘 Toilet Closet Bolts特長螺釘 Special Longer Screws建業螺釘 Building Fasteners不銹鋼六角螺絲 Stainless Steel Hex Socket Cap Screws不銹鋼特殊螺釘 Special Stainless Steel Screws寬牙螺釘（粗牙螺釘） Coarse Thread Screws鏈帶螺釘 Collated Screws水泥螺釘 Concrete Screws板模螺釘 Construction Bolts鋅蝶螺釘 Die Cast Wing Screws; Zinc Alloy重型車釘 Heavy Duty Wheel Hub Bolts內六角固定螺釘 Hex Socket Set Screws復合材料用螺釘（夾板用） Particle Board Screws犁壁螺釘 Plow Bolts不銹鋼木螺絲 Stainless Steel Wood Screws套掛螺栓及螺釘 Toggle Bolts鈦合金膨脹螺釘 Titanium Alloy Expansion Bolts不銹鋼高低牙螺釘 Stainless Steel High-Low Thread Screws不銹鋼機械螺釘 Stainless Steel Machine Screws不銹鋼鉆尾螺釘 Stainless Steel Self Drilling Screws不銹鋼自攻螺釘 Stainless Steel Self Tapping Screws不銹鋼自削螺釘 Stainless Steel Thread Cutting Screws不銹鋼三角牙螺釘 Stainless Steel Tri-Lobular Thread Screws 不銹鋼寬牙螺釘 Stainless Steel Coarse Thread Screws開槽沉頭螺釘 Slotted Flat Countersunk Head Machine Screws 開槽盤頭螺釘 Slotted Pan Head Machine Screws十字槽盤頭螺釘 Cross Recessed Pan Head Machine Screws 滾花頭臺階螺釘 Knurled Thurmb Screws六角頭木螺釘 Hexagon Head Wood Screws平頭滾花螺釘 Knurled Thin Thumb Screws四、螺母/螺帽 Nuts六角螺母 Hexagon Nuts六角蓋形螺母 Hex Cap Nuts六角鋸齒螺母 Hex Serrated Nuts六角法蘭螺母 Hex Flange Nuts六角平面螺母 Hex Flat Nuts六角厚螺母Hex Thick Nuts重型六角開槽螺母 Heavy Hexagon Slotted Nuts高腳螺母 Hex Coupling Nuts (High Nuts)圓螺母 Round Nuts四角螺母/四方螺母 Square Nuts四方焊接螺母 Square Weld Nuts四爪螺母Four-Claw Nuts管用螺母 Pipe Nuts輪殼螺母 Wheel Nuts蝶型螺母 Wing NutsU形螺母 U NutsT形螺母 T Nuts環首螺母 Eye Nuts齒形螺母 Kep Nuts齒花螺母 Clinch Nuts焊接螺帽 Weld Nuts壓鉚螺母 Self-clinching Nuts高張力螺母 High Strength Nuts建業用螺母 Structural Nuts不銹鋼螺母 Stainless Steel Nuts銅螺母 Brass Nuts鋁螺母 Aluminum Nuts合金鋼螺母 Alloy Steel Nuts重型車螺母 Heavy Duty Wheel Hub Nuts鐵器焊接袋帽 Acorn Cap Nuts金屬預置扭矩式螺母 All-Metal Prevailing Torque Type Nuts壁虎螺母 Anchor Nuts大尺寸螺母 Big Size Nuts鐵蓋袋帽 Closed End Acorn Nuts盤形華司螺母 Conical Washer Nuts鐵蓋+尼龍圈組合蓋帽 Din 986 Domed Cap Nuts法蘭尼龍蓋帽 Flange Nylon Insert Lock Nuts平面華司螺母 Flat Washer Nuts六角割溝螺母 Hex Slotted Nuts自鎖螺母 Self-Locking Nuts制止螺母 Sliding NutsSLN-自動防松螺母 SLN Self-Locking Nuts特殊螺母 Special Nuts彈簧螺母 Spring Nuts不銹鋼法蘭螺母 Stainless Steel Flange Nuts不銹鋼六角輪緣尼龍螺母 Stainless Steel Flange Nylon Insert Lock Nuts 不銹鋼六角重型螺母 Stainless Steel Heavy Hex Nuts不銹鋼六角螺母 Stainless Steel Hex Nuts不銹鋼尼龍嵌入螺母 Stainless Steel Nylon Insert Lock Nuts普通六角螺母 Hex Nuts六角重型螺母 Heavy Hex Nuts薄型螺母 Hex Jam Nuts尼龍嵌入防松螺母 Nylon Insert Lock Nuts尼龍鎖緊螺母Nylon Cage Nuts機械螺絲用六角螺母 Hex Machine Screw Nuts米制六角開槽螺母 Metric Slotted Hex Nuts軌道螺栓用方螺母 Track Bolt Nuts米制六角金屬鎖緊螺母 Prevalling Torque Hexagon Nuts開槽螺母Slotted Round Nuts六角開槽薄螺母Hexagon Slotted Thin Nuts五、螺柱 Studs壓鉚螺柱 Self-Clinching Studs銅螺柱 Brass Studs焊接螺柱 Weld Studs雙頭螺柱 Double End Studs六角螺柱 Hex Studs支撐卡柱 Self-Clinching Standoffs六、墊圈 Washers彈簧墊圈 Spring Washers/Spring Lock Washers寬型彈簧墊圈 Extra-duty Helical Spring Lock Washers杯型墊圈 Cup washers波形墊圈 Wave Washers內齒墊圈 Internal Tooth Washers外齒墊圈 External Tooth Washers銅墊圈 Copper Washers方墊圈 Square Washers密封墊圈 Sealing Washers碟形彈簧墊圈 Disc Spring Washers外舌止動墊圈External Tab Washers高強度墊圈 High strengthen washers橡膠墊圈 Rubber Washers鎖緊墊圈 Lock Washers平墊圈 Plain Washers鞍型彈性墊圈 Curved Spring Washers鋸齒鎖緊彈性墊圈 Toothed lock washers外鋸齒鎖緊墊圈 Serrated Lock Washers錐形墊圈 Taper Washers重型彈簧墊圈 Heavy Spring Lock Washers尼龍墊圈 Nylon Washers淬硬鋼墊圈 Hardened Steel Washers七、鉚釘 Rivets平頭鉚釘 Flat Head Rivets擊芯鉚釘 Drive Rivets彩色鉚釘 Colored Rivets沉頭鉚釘 Countersunk Head Rivets半沉頭鉚釘 Oval Countersunk Head Rivets平錐頭鉚釘 Cone Head Rivets抽芯鉚釘 Blind Rivets開口鉚釘 Split Rivets開口型抽芯鉚釘 Open End Blind Rivets拉鉚釘 Pop Rivets封閉鉚釘Closed End Rivets封閉性抽芯鉚釘 Sealed Type Blind Rivets塑料鉚釘 Plastic Rivets空心鉚釘 Tubular Rivets環槽鉚釘 Ring Groove Rivets單鼓型鉚釘 Single-Grip Rivets圓頭鉚釘 Round Head Rivets高沉頭鉚釘 Countersunk Head Rivets鋁鉚釘 Aluminum Rivets實心鉚釘 Solid Rivets沉頭實心鉚釘 Countersunk Head Solid Rivets燈籠鉚釘 Lantern Blind Rivets半空心鉚釘 Semi-Tubular Rivets圓頭半空心鉚釘 Semi-tubular Pan Head Rivets異型鉚釘 Special Rivets不銹鋼鉚釘 Stainless Steel Rivets雙鼓型鉚釘 Multi-grip Rivets高強度鉚釘 High Strength Rivets臺階鉚釘 Step Rivets面板鉚釘 Tablet Rivets開花型抽芯鉚釘 Flowering Blind Rivets拉花型抽芯鉚釘 Peel Type Blind Rivets溝槽型抽芯鉚釘 Grooved Type Blind Rivet鉚接工具 Riveting Tool八、壁虎（膨脹螺栓）Anchors/Expansion Bolts化學錨栓 Chemical Anchors打入式壁虎 Hammer Drive Anchors內迫壁虎 Drop in Anchors重型壁虎 Heavy Duty Anchors錘釘壁虎 Hit Anchors中空壁虎 Hollow Wall Anchors套管壁虎 Sleeve Anchors插片壁虎 Ceiling Anchors門窗、地板專用壁虎 Nylon Frame Anchors or Metal frame Anchors電梯壁虎 Bolt Anchors車修壁虎 Wedge Anchors魚眼壁虎 Tie Wire Anchors外迫壁虎 Cut Anchors塑料膨脹 Plastic Anchors不銹鋼重載脹栓 Heavy Duty Expansion Anchors象腳壁虎 Elephant Foot Anchors長型蘭花夾 Short Strap Anchors九、銷 Pins開口銷 Split Pins圓錐銷 Taper Pins鎖銷 Lock Pins銷軸 Clevis Pins with head槽銷 Grooved Pins彈性銷 Spring Pins圓柱銷 Parallel Pins彈性圓柱銷 Slotted Spring Pins帶孔銷 Pins with split pin hole十、擋圈 Circlips/Rings開口擋圈 E rings孔用擋圈 Circlips for holes軸用鋼絲擋圈 Roundwire Snap Rings for shaft軸肩擋圈Rings for shoulder夾緊擋圈 Grip Rings軸用卡簧 Circlips for shafts帶齒軸用擋圈 Retaining Rings with Lugs for shafts鋼絲鎖圈 Round wire Circlips錐形鎖緊擋圈 Lock Rings with cone pins十一、其他 Others牙條 Threaded Rod沖壓件 Stampings平鍵 Parallel Keys半圓鍵 Woodruff Keys扳手 Spanners鋼絲螺套 Wire Thread Insert自動車床車削件 CNC Turning Parts齒輪 Gears模具 Molds線材盤元 Iron or steel wire rod鉸鏈 Hinge表面處理 Surface Treatment。
紧固件-中英文对照
No.xx简写中文1 screw scr螺丝2 nut nut螺母3 washer wash垫圈4 head hd头5 thread thre螺纹6 coating coat镀层7 rivet riv铆钉8 standoff stdoff内外六角钉9 driver driv穴10 hexagon hexa六角11 tooth tooth齿12 lock lck锁13 spring spr弹簧14 wave wave波浪型15 pitch pitch牙距16 partial thread PT半螺纹17 PT PT一种螺纹形式18 Full Thread FT全螺纹19 silver silv银20 cone cone锥形21 Eco-syn Eco 30度牙的一种螺纹22 ThreadForming TF自攻螺纹23 Self Tapping self tapp自切屑螺纹24 pin pin销25 shaft Shaf轴26 steel St铁27 stainless steel SS不锈钢28 Brass(Cu) Bras(Cu)铜29 Aluminum AL铝30 Rubber Rub橡胶31 machine screw mech scr机制螺丝32 SEM screw SEM Scr组合螺丝33 Material material材料34 Grade GD等级35 Finish Finish表面处理36 Point Point点37 Clamp Clam夹子38 internal Int内39 external ext外40 thickness /厚度41 length /xx42 hole /xx43 Metric Metcric公制44 DIN /德标45 ANSI /美标46 JIS /日标螺丝相关参数英语对照A: Machine Screw:机械螺丝B: Tapping Screw:自攻螺丝(分使用于金属与使用于塑料二种) B-1: Sheet Metal Tapping Screw. (铁板牙自攻螺丝)B-2: Plastic Tapping Screw. (塑料用,自攻螺丝)C: Wooden Screw :木工螺丝D: Drywall Screw :水泥墙螺丝常见螺丝材质:a.Low Carbon Steel :低碳钢b. SS-304 : Stainless Steel 304c. SS-302: Stainless Steel 302 :结构韧性较好d. Aluminum 5052 :铝合金5052d. Brass:xxe. Bronze:青铜f. UNS C11000 Copper:锑铜Finish Code:外观处理规格Head Code:头部外型螺丝型号Drive Code:头部剖沟,特征型号Length Code:螺丝长度(mm)A-1: Thread Code:螺丝型号A-2: Length Code:螺丝长度:A-3: Drive Code/头部剖沟,特征.a. Slotted:一字( Minus )b. Phillips:十字( Plus )c. Phil-Slot:一字/十字d. Hex Scoket:xxe. One Way:单向(只可锁入,不可退出)A-4: Head Code/头部外型.a. Flat:平头(锁入后,顶部与工作件齐平)b. Oval:色拉头c. Round:圆头d. Pan:圆扁头e. Truss:大圆扁头f. Hex :六角头A-5: Finish Code/外观处理.a. Z: Zine-Plated:镀锌b. Ni: Ni-Plated:镀镍c. Tin-Plated:镀锡d. Zine Plated / Green Iridite:镀锌绿膜处理.e. Radiant Plated:镀五彩f. Passivate:抗氧化处理.g. Alodial Finish:无外观处理螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement镀后去氢，防止氢脆Case carburization表面渗碳With across flats对边With across corners对角Radius of fillet:头下圆角Transition thread length过度螺纹Wrenching height扳拧高度Rockwell铬氏硬度Vickers维氏硬度Brinellxx氏硬度Metallography microscope金相显微镜Salt spray device盐雾试验箱Tensile testing machine拉力试验机Cold forming冷打Hot forging红镦P C 8 = property class 8机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawingxx：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punchingDiameter直径Lengthxx各类紧固件标准件产品xx对照插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力xx壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts) 圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角xx螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts环首螺丝Eye Bolts内六角孔螺丝Hex Socket Cap Screws 固定螺丝Set Screws螺椿栓Stud Bolts螺旋椿Screw Studs轮壳螺栓Wheel Bolts翼形螺丝Wing Screws自攻螺丝Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws旋入螺丝Drive Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts套挂螺丝Toggle Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems)大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铜螺丝Brass Screws铝螺丝Aluminum Screws合金钢螺丝Alloy Steel Screws电子螺丝Electronic Screws微小精密螺丝Micro Screws塑料螺丝Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts 拇指螺丝Thumb Screws双头牙螺丝Double End Screws Hanger Bolt车辆(汽车)螺丝、螺帽Automotive Fasteners航天用螺丝Aerospace Fasteners飞机特殊扣件Source Control BoltsxxBlind Bolts面板螺丝Panel Fasteners电梯螺丝Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws 不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws 铰链螺丝Hinge Screws货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws 其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws链带螺丝Collated Screws水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws犁壁螺丝Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线Copper Alloy Wire线切割线E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢Steel Bar(Hex/Round/Square)转回90度碾线头机90讧evolving Wire Twisting Machine 气动拉钉机Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging 自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace 连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace 中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives成型冲模Header Punches In Various Drives螺丝打头机Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater 空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass)螺帽模Nut Forming Dies螺帽成型模Nuts Formers特殊零件成型机Parts Forming Maching冲模Punch Dies冲子Punch Pins罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine 止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉Spheroidizing Bright Annealing Furnace 球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具Tools六角整头模Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd电镀化学原料Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统Iso Quality Assurance System生产管理系统Production Control System物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stainless Steel Hread Rod 马达轴承轴心组件Bearing Shaft(Motor) 轴承轴心Bearing Shaft开口铆钉Blind Rivets长形拉帽Blind Rivet Nuts拉帽Blind NutsxxBlind Rivets实心梢Clevis Pins And Straight Pins弹片Clips卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter PinsE型环E-Rings膨胀螺栓Expansion Anchor Bolts鸡眼钉Eyelets RivetsR型销Snap Pins闸、锁Latches And Keeper Assembleds 其它特殊铆钉Other Specil Rivets销Pins格式管夹、管束Pipe Hanger铆钉Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings中空钉Semi-Tubular Rivet开叉钉Split Drive Anchors弹簧华司Spring Washers弹簧蝴蝶夹Spring Wings不锈钢华司Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉Thread Nails钛合金铆钉Titaium Alloy Rivets管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件Fasteners合金钢工具Alloy Steel Tools螺栓模Bolt Heading Dies手动xx钳Hand Riveter船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl)装饰链Decorative Chains自攻螺纹衬套Ensat Threaded Inserts六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet Metal Fasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子T-Yoke轮胎链Tire Chains狗链Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle 针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-Low Thread Screws 不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws。
紧固件标准件中英文对照
英文名称对应标准Square head bolts GB/T 8-88 C 级Flat countersunk square neck bolts GB/T 10-88 沉头沉带榫螺栓Flate countersunk nib bolts GB/T 11-88 (大)半圆头方颈螺栓Cup head square neck (with large head)bolt GB/T 14/15-88六角头铰制孔用螺栓Hexagon fit boltsGB/T 27-88 A 和B 级六角头螺杆带铰制孔用螺栓(细杆)Hexagon fit bolts with split pin hole on shank(Reduced shank) GB/T 28-88 A 和B 级十字槽凹穴六角头螺栓Cross recessed hexagon bolts with indentation GB/T 29.2-88 A 和B 级六角头头部带孔螺栓Hexagon bolts with wire holes on head GB/T 32.1-88 A 和B 级T 型槽用螺栓Bolt for T-slot GB/T 35.1-88 B 级加强半圆头方颈螺栓Strengthened cap head square neck bolts GB/T 794.1-93 活节螺栓Eye bolts GB/T798-88地角螺栓Eyelet bolts GB/T799-88头角头螺栓Hexagon head bolts GB/T5780-2000 C 级六角头法兰面螺栓Hexagon flange bolts GB/T5789-86 B 级外六角花法兰面螺栓Steel hexalobular head bolt with small flangeDIN 34801-9918.久美特Geomet 19.耐落Nylok 陆锈宝Rupst 20.翡丽雅特 ViridAct 21.美加力Magni 沉头方劲螺栓中文名称一.孔别三.常用名称1.螺丝类方头螺栓1.割沟Slotted2.十字穴 Phillips3.米字穴 Pozidriv(cross recess)4.十字割沟 Slotted phillips5.四角孔Square6.十字方孔 Square phillips7.六角孔hexagon8.方孔割沟Square slotted9.梅花穴Six-lobe 10.三角孔Triangle 11.Y 型槽Y-type 12.斜Y 槽Tri-wing 13.五等角5-Point 二,电镀1.电镀锌Zinc plated2.白皮Plain finished3.五彩Yellow zinc plated4.镀镍Nickel plated5.热浸锌Hot dip galvanized6.黑锌Black zinc plated7.镀黑Black finished8.染黑Black oxide9.(黑)磷酸盐(black)Phosphated 10.黄铜 Brass 11.镀青蓝Unichrome plated 12.古铜A.C Brontze 13.青古铜Antique brass 14.机械镀锌Mechanical galvanized 15.绿锌Green zinc plated 16.电锌腊Zinc plated&waxed 17.达克锈Dacrotizing plated英文名称对应标准双头螺柱bm=1d Double end studs-bm=1d GB/T 897-88等长双头螺柱 B 级Double end studs(clamping type)-product grade A GB/T 901-88螺杆Thread rods GB/T 15389-943.螺钉类英文名称对应标准开槽圆柱头螺钉Slotted cheese head screws GB/T65-2000开槽沉头螺钉Slotted countersunk flat head screws (common head style) GB/T68-2000 eqv ISO 2009-94开槽半沉头螺钉Countersunk slotted raised head screws(common head style)GB/T69-2000 eqv ISO 2010-94内六角圆柱头螺钉Hexagon socket head cap screws GB/T70.1-2000 eqv ISO 4762.2-97内六角平圆头螺钉Hexagon socket button head screws GB/T70.2-2000 eqv ISO 7380-97内六角沉头螺钉Hexagon socket countersunk head screws GB/T70.3-2000 eqv ISO 10642-97十字槽盘头螺钉Pan head screw with cross recess GB/T818-2000 eqv ISO 7045-94十字槽半沉头螺钉Countersunk raised head screws(common head style)with cross recess GB/T820-2000 eqv ISO 7047-94十字槽圆柱头螺钉Cheese head screws with cross recess GB/T822-2000 eqv ISO 7048-94滚花高头螺钉Knurled thumb screws GB 834-88滚花平头螺钉Knurled screws GB 835-88内六角花形盘头螺钉Hexagon lobular socket pan head scerws GB 2672-86内六角圆柱头轴肩螺钉Hexagon socket head shoulder scerws GB/T 5281-854.自攻螺钉 英文名称对应标准十字槽盘头盘自攻螺钉Cross recessed pan head tapping screws GB 845-85十字槽沉头盘自攻螺钉Cross recessed countersunk head tapping screws GB 846-85十字槽盘头盘自攻锁紧螺钉Cross recessed pan head thread forming screws GB 6560-86十字槽凹穴六角头自攻螺钉Cross recessed hexagon head tapping screws with indentationGB 9456-98十字槽自攻螺钉-刮削端(用于精密机械)cross recessed tapping screws-scrape point(fasters for fine mechanics)GB/T 13806-2墙板自攻螺钉Dry wall screws GB/T14210-93十字槽盘头自钻自攻螺钉Cross recessed pan head self-drilling tapping screws GB/T15856.1-95六角凸缘自攻螺钉Hexagon head tapping screws with collarGB/T16824.1-97 eqv ISO 7053-92中文名称中文名称中文名称英文名称对应标准方螺母-C 级Square nuts-product grade C GB/T39-88六角螺母-C 级Hexagon nuts-product grade C GB/T41-2000eqv ISO 4034-99六角厚螺母Hexagon thick nuts GB/T56-88六角薄螺母Hexagon thin nuts GB/T6172.1-2000eqvISO 4035-99蝶形螺母Wing nuts GB/T 62-88组合式盖形螺母Acorn nutsGB/T 802-88球面六角螺母Hexagon nut with raised face GB/T 804-88滚花高螺母kunrled nut with collarGB/T 806-881型非金属嵌件六角锁紧螺母Prevailing torque type hexagon nuts(with non-metallic insert).style 1GB/T889.1-2000eqv 7040-97盖形螺母Acorn nutsGB/T 923-88六角薄螺母 无倒角Hexagon thin nuts (unchamfered)GB/T6174-2000eqvISO 4036-99六 角法兰面螺母Hexagon nuts with flangeGB/T6177.1-2000eqv ISO 4161-991型六角开槽螺母Hexagon slotted and castle nuts.style1GB/T 6178-86全金属六角锁紧螺母Prevailing torque type all-metal hexagon nuts GB/T 6184-2000eqv ISO 7719-97焊接方螺母square weld nut GB/T 13680-92焊接六角螺母Hexagon weld nuts GB/T 13681-92平头铆螺母Flat head riveted nuts GB/T 17880.1-996.挡圈 英文名称对应标准锥销锁紧挡圈Lock ring with corne pin GB/T 883-86轴肩挡圈Rings for shouderGB/T 891-86螺钉紧固轴端挡圈Lock rings at the end of shaft with screw GB/T 893.1-86孔用弹性挡圈-A 型Circlips for holes -typeA GB/T 894.1-86轴用弹性挡圈Circlips for shaft -typeA GB/T 895-2-86开口挡圈"E"ringsGB/T 896-86钢丝锁圈Round coire circlips GB/T 921-86夹紧挡圈Crip ringsGB/T 960-86中文名称中文名称英文名称对应标准弹簧垫圈(标准型)Single coil spring lock washers (normal type)GB/T 93-87平垫圈-C 级Plain washersGB/T 95-85eqv ISO 7091-2000大平垫圈Plain washers-large series GB/T 96-85 A 和B 级鞍形弹性垫圈Curved spring washers GB/T 860-87内齿锁紧垫圈Lock washers internal teethGB/T 861.1-87内锯齿锁紧垫圈Serrated lock washers internal teeth GB/T 861.2-87外锯齿锁紧垫圈Serrated lock washers external teeth GB/T 862.2-87波型弹性垫圈Wave spring washersGB/T 955-87锥形锁紧垫圈Countersunk external toothed look washersGB/T 956.1-87锥形锯齿锁紧垫圈Countersunk serrated external toothed lock washers GB/T 956.2-878.销英文名称对应标准开口销Split pins GB/T 91-2000eqvISO1234-97圆锥销Taper pinsGB/T 117-2000eqvISO2339-86螺纹圆柱销Paraller pins with external thread GB/T 878-86销轴Clevis pins with head GB/T 882-86平头铆钉Flat head rivetsGB/T 109-86平锥头铆钉（粗制）Cone-head rivets-black GB/T 864-86空心铆钉Tubular rivetsGB/T 876-86封闭型扁圆头抽芯铆钉Mushroom head break mandred closed end blind rivets GB/T 12615-90开口型沉头抽芯铆钉120 deg flush head break mandrel blind rivetsGB/T 12617-90中文名称中文名称9.紧固件-组合件和连接副英文名称对应标准中文名称钢结构用高强度大六角头螺栓High strength bolts with large hexagon head for steel structures GB/T1230-91钢结构用高强度大六角头螺母High strength large hexagon nuts for steel stuctures GB/T1229-91钢结构用高强度大六角头垫圈High strength plain washers for steel structures GB/T1230-91钢结构用扭剪型高强度螺栓连接副Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures GB/T3632-95十字槽盘头螺钉,弹簧垫圈和平垫圈组合件Cross recessed pan head screw ,single coil spring lock washer and plain washer assemblies GB/T 9074-.4-88无头焊钉Headless for stud welding GB/T 10432-89圆柱头焊钉Cheese head studs for stud welding GB/T 10433-89机械焊接螺钉Weld screws with metric thread DIN 34817-2001。
紧固件中英文对照
白鐵蓋螺絲 A2(18-8)CAP S CREWS水平調整螺絲A DJUST ED LE VELIN G SCR EWS 航太扣件AEROS PACEFASTE NERS合金鋼螺絲(栓)ALLOY STEE L SCR EWS (BOLTS)鋁螺絲 ALU MINUM SCRE WS車輛(汽車)螺絲、螺帽 AUTO MOTIV E FAS TENER S複含材料鉆尾螺絲 BI-METAL SELF DRIL LINGSCREW S 大尺寸螺絲B IG SI ZE BO LTS 公母螺絲組 BIND ER PO ST &SCREW SET拉栓B LINDBOLTS銅螺絲(栓) B RASSSCREW S (BO LTS)建築螺絲 BUIL DINGFASTE NERS建築膨漲螺絲 BU ILDIN G WAL L ANC HOR 半圓頭六角孔螺絲B UTTON HEAD SOCK ET CA P SCR EWS 馬車螺絲CARRI AGE B OLTS活動輪螺絲附件C ASTOR S FIT TINGS塑板螺絲 CHI PBOAR D SCR EWS 快速釘緊螺絲及螺帽CLINC H STU DS &NUTS擠壓扣件 CLIN CHING FAST ENERS齒花扣件 CLI NCHIN G PAR TS寬牙螺絲C OARSE THRE AD SC REWS鏈帶螺絲 COLL ATEDSCREW S水泥螺絲 CO NCRET E SCR EWS 板模扣件CONST RUCTI ON FA STENE RS貨櫃螺絲C ONTAI NER S CREWS耐候鋼螺絲 CO NTENSTEEL HEAV Y HEX BOLT S魚尾螺絲 CO NTENSTEEL OVAL NECK TRAC K BOL TS雙刀螺絲C UTTER SCRE WS匣板螺絲D ECK S CREWS鋅蝶螺絲 DIE CAST WING SCRE WS;ZI NC AL LOY 雙頭牙螺絲 DOUB LE EN D SCR EWS,HANGE R BOL T旋鎖螺絲 DR IVE L OCK S CREWS旋入螺絲 DRI VE SC REWS牆用螺絲 DRYW ALL S CREWSEJO T DEL TA PT SCRE WSE JOT P T SCR EWS 電子螺絲ELECT RONIC SCRE WS電梯螺絲E LEVAT OR BO LTS 歐洲螺絲EUROSCREW S環首螺絲 EY E BOL TS岡山頭螺絲FILLI STERSCREW S鰭頭螺絲 FI N NEC K ROU ND HE AD BO LTS 管配件接頭 FITT ING F ASTEN ERS (CONNE CTORS)突緣螺絲 FL ANGEBOLTS (SCR EWS)平頭六角孔螺絲F LAT H EAD S OCKET CAPSCREW S平紡螺絲 FL AT PA N HEA D SCR EWS 地板螺絲FLOOR ING P ANELSCREW S基礎螺絲 FO UNDAT ION B OLTS框架支撐螺絲 FR AME A NCHOR-LAGROUND SCRE WS傢俱螺絲F URNIT URE S CREWS (CON NECTI NG BO LTS)重型車螺絲、螺帽HEAVY DUTY WHEE L HUB BOLT S & N UTS 六角螺絲(栓) HE X HEA D CAP SCRE WS (H EX BO LTS)六角機械螺絲 HE X HEA D MAC HINEBOLTS六角木牙螺絲H EX LA G BOL TS內六角孔螺絲 HEXSOCKE T CAP SCRE WS等高螺絲H EX SO CKETHEADSHOUL DER S CREW薄頭強力螺絲 HE X SOC KET L OW HE AD CA P SCR EW內六角固定螺絲 HEX SOCK ET SE T SCR EWS 華司頭機械螺絲 HE X WAS HER H EAD M ACHIN E SCR EWS 高低牙螺絲 HIGH LOWTHREA D SCR EWS 高張力螺絲 HEXSOCKE T HEA D SHO ULDER SCRE W鉸鏈螺絲 HI NGE S CREWS勾頭螺栓 HOO K BOL TS管夾螺絲H OSE C LAMPSCREW S哈克釘 HUC K BOL TS旋鎖螺絲K TX LO CKING RECE SS SC REWS機械螺絲 MACH INE S CREWSMDF螺絲 MD F SCR EWS 微小精密螺絲 MIC RO SC REWS鉬六角螺絲 MOHEX H EAD C AP SC REWS鉬NC螺絲 MONC FA STENE RS鉬螺帽 MO NUTS鎳合金螺絲 MO NEL F ASTEN ERS 多衝程螺絲 MULT I-STA GE SC REW & PART S利革釘 NYL ON PL UG &SCREW S單向螺絲 ON E WAY LAGSCREW S枋頭中心螺絲PAN H EAD C ENTER BOLT S面板螺絲 PA NEL F ASTEN ERS 複合材料用螺絲(夾板用) PA RTICL E BOA RD SC REWS貫穿螺絲 PENE TRATE SCRE WS十字四角複合螺絲 PH+SQ C OMBIN ATION SCRE WS塑膠螺絲P LASTI C SCR EWS 犁壁螺絲PLOWBOLTS特殊精密螺絲P RECIS ION A XIS A ND SP ECIAL FAST ENERS卷帶螺絲 ROL L COL LATED SCRE WS屋頂螺絲R OOFIN G SCR EWS 螺旋椿S CREWSTUDS機(踏)車用螺絲.軸心S CREWS & SH AFTSFOR M OTORC YCLEOR BI CYCLE 針車用螺絲.軸心 SCRE WS &SHAFT S FOR SEWI NG MA CHINE螺絲附華司組合SCREW S & W ASHER S ASS EMBLE D (SE MS) 安全螺絲SECUR ITY S CREWS鑽尾螺絲 SEL F DRI LLING SCRE WS自攻螺絲S ELF T APPIN G SCR EWS 固定螺絲SCREW S & S HAFTS FORSEWIN G MAC HINE剪力釘SHEAR CONC RETESTUD束肩螺絲(栓) S HOULD ER SC REWS(BOLT S)一字溝槽固定螺絲 SL OTTED SETSCREW S止付螺絲 SO CKETSET S CREWS飛機特殊扣件S OURCE CONT ROL B OLTS特殊塗裝螺絲 SP ECIAL COAT ING S CREWS特長螺絲 SPE CIALLONGE R SCR EWS 特殊材質螺絲 SPE CIALMATER IAL S CREWS特殊螺絲 SPE CIALSCREW S ORBOLTS特殊防鬆螺絲S PECIA L SEL F-LOC KINGSCREW S不鏽鋼特殊螺絲 SPEC IAL S TAINL ESS S TEELSCREW S特殊割尾螺絲SPECI AL TH READCUTTI NG SC REWS四角螺絲 SQUA RE HE AD BO LTS 四角頭固定螺絲 SQ UAREHEADSET S CREWS不鏽鋼大螺絲S TAINL ESS S TEELBOLTS不鏽鋼塑板螺絲STAIN LESSSTEEL CHIP BOARD SCRE WS不鏽鋼粗牙螺絲 STA INLES S STE EL CO ARSETHREA D SCR EWS 不鏽鋼旋入螺絲 ST AINLE SS ST EEL D RIVESCREW S不鏽鋼平頭內六角孔螺絲STAIN LESSSTEEL FLAT HEAD SOCK ET CA P SCR EWS 不鏽鋼六角螺絲 ST AINLE SS ST EEL H EX HE AD CA P SCR EWS 不鏽鋼內六角螺絲S TAINL ESS S TEELHEX S OCKET CAPSCREW S不鏽鋼固定螺絲 STAI NLESS STEE L HEX SOCK ET SE T SCR EWS 不鏽鋼高低牙螺絲S TAINL ESS S TEELHIGH-LOW T HREAD SCRE WS不鏽鋼機械螺絲 STA INLES S STE EL MA CHINE SCRE WS不鏽鋼小螺絲 STAI NLESS STEE L SCR EWS 不鏽鋼鑽尾螺絲 ST AINLE SS ST EEL S ELF D RILLI NG SC REWS不鏽鋼自攻螺絲S TAINL ESS S TEELSELFTAPPI NG SC REWS不鏽鋼S EMS 螺絲 STA INLES S STE EL SE MS SC REWS不鏽鋼自削螺絲S TAINL ESS S TEELTHREA D CUT TINGSCREW S不鏽鋼牙條棒STAIN LESSSTEEL THRE AD RO D不鏽鋼三角牙螺絲 STA INLES S STE EL TR IANGU LAR S CREWTHREA D 不鏽鋼木螺絲STAIN LESSSTEEL WOOD SCRE WS卡鎖壁虎S TEELLOCKI NG AN CHOR大頭馬車螺絲 ST EP BO LTS 螺樁栓S TUD B OLTST頭螺絲 T HE AD BO LTS 扭矩控制螺栓 T.C. BOL TS (T ENSIO N CON TROLBOLTS)自削螺絲 TH READCUTTI NG SC REWS牙條棒THREA D ROD姆指螺絲 THU MB SC REWS鈦合金自行車螺絲TITAN IUM -6AL –4R AL LOY F ASTEN ERS 鈦合金螺絲 TITA NIUMALLOY BOLT S鈦六角螺絲T ITANI UM HE X HEA D CAP SCRE WS (H EX BO LTS)鈦NC螺絲 TIT ANIUM NC F ASTEN ERS 鈦止付螺絲 TITA NIUMSET S CREWS鈦內六角孔螺絲TITAN IUM S OCKET CAPSCREW S鈦牙條 TIT ANIUM THRE AD RO D套掛螺絲 TO GGLEBOLTS套掛螺栓及螺絲TOGGL E BOL TS &ACOUS TICAL LAG(SCRE WEYE)馬桶螺絲 TOI LET C LOSET BOLT STO RX SC REWSTORXSCREW S軌道螺栓(魚尾螺絲) T RACKBOLTS三角牙螺絲 TR IANGU LAR S CREWS THRE ADU型螺栓U BOLT S直立軸螺絲V ERTIC AL SH AFT S CREWS焊接螺絲 WEL D STU DS,SC REWS,BOLTS焊點螺絲 WEL D STU DS SC REWS輪轂螺栓 WHEE L BOL TS車輪軸螺絲,螺帽 WH EEL H UB BO LTS A ND NU TS窗戶螺絲W INDOW SCRE WS翼形螺絲W ING S CREWS木螺絲 WOOD SCRE WS鋯螺絲 ZR FAST ENERSSET SCRE WS SE T SCR EWS HIGHSTREN GTH B OLTSHIGHSTREN GTH B OLTS鐵蓋焊接袋帽 AC ORN C AP NU TS金屬預置扭矩式螺帽A LL-ME TAL P REVAI LINGTORQU E TYP E NUT S 合金鋼螺帽A LLOYSTEEL NUTS鋁螺帽 ALUM INUMNUTS壁虎螺帽 ANCH OR NU TS圓柱帽 BA RRELNUTS(CROS S DOW EL) 大尺寸螺帽 BIGSIZENUTS銅螺帽BRASS NUTS四角多用途螺帽CAGENUTS袋帽C AP NU TS城堡螺帽C ASTLE NUTS齒花螺帽 CLI NCH N UTS 鐵蓋袋帽CLOSE D END ACOR N NUT S盤形華司+袋帽螺帽 CO NICAL WASH ER AN D CAP NUTS 盤形華司螺帽C ONICA L WAS HER N UTS 耐候鋼六角重型螺帽CORTE N STE EL HE AVY H EX NU TS 長螺帽 CO UPLIN G NUT S鐵蓋+尼龍圈組合蓋帽D IN 986 DOM ED CA P NUT S碟鎖防鬆脫螺帽 DISK-LOCK NUTS企眼螺帽 EYE COUP LINGNUTS環首螺帽 EYENUTS突緣尼龍螺帽 FL ANGENYLON INSE RT LO CK NU TS平面華司螺帽 FLAT WASH ER NU TS齒輪 GEA RS六角重型螺帽 HEAV Y HEX NUTS六角蓋頭螺帽H EX CA P NUT S六角突緣螺帽HEX F LANGE NUTS薄型螺帽 HEX JAMNUTS薄型電子六角螺帽HEX J AM NU TS (F OR EL ECTRO NIC)機械螺絲用六角螺帽 HEXMACHI NE SC REW N UT普通六角螺帽 HEXNUTS六角鋸齒螺帽 HE X SER RATED NUTS雙頭內牙螺帽H EX (R EDUCE R )CO UPLIN G NUT S高螺帽 HIG H NUT S高張力螺帽H IGH S TRENG TH NU TS內外牙螺母(拉帽) I NSERT NUTSJCN NUTS JCNNUTS齒形螺帽 KEPNUTS防鬆螺帽 LOCK NUTS長螺帽 LONG NUTS機車用螺帽 NU TS FO R MOT ORCYC LE面板螺帽N UTS P LATE尼龍袋帽 NYLO N CAP INSE RT LO CK NU TS尼龍嵌入防鬆螺帽 NY LON I NSERT LOCK NUTS馬桶螺帽 OPE N END ACOR N NUT S卡車輪胎螺帽OUTER CAPNUTS管用螺帽 PIPE NUTS塑膠螺帽 PLA STICNUTSPOPNUTSPOP N UTS 抑制螺帽PREVA ILING TORG UE NU T快速扣件 PU SH NU T FAS TENER S長方形螺帽(薄型) RE CTANG LE JA M NUT S長方四角螺帽RECTA NGLESQUAR E NUT S圓螺帽 ROU ND NU TS自鎖螺帽S ELF-L OCKIN G NUT S制止螺帽 SL IDING NUTSSLN-自鎖防鬆螺帽 SL N SEL F-LOC KINGNUTS溝槽螺帽 SLOT TED N UTS 特殊螺帽SPECI AL NU TS特殊輪轂螺帽 SPEC IAL W HEELNUTS彈簧螺帽 SPRI NG NU TS薄型四角螺帽 SQUA RE JA M NUT S四角螺帽 SQ UARENUTS不鏽鋼突緣螺帽S TAINL ESS S TEELFLANG E NUT S不鏽鋼六角突緣尼龍螺帽STAIN LESSSTEEL FLAN GE NY LON I NSERT LOCK NUTS不鏽鋼六角重型螺帽 STA INLES S STE EL HE AVY H EX NU TS不鏽鋼六角螺帽 STA INLES S STE EL HE X NUT S不鏽鋼螺帽S TAINL ESS S TEELNUTS不鏽鋼尼龍嵌入螺帽 STAI NLESS STEE L NYL ON IN SERTLOCKNUTS不鏽鋼四角螺帽S TAINL ESS S TEELSQUAR E NUT S建築用螺帽S TRUCT URALNUTST形螺帽 T NU TS塑膠品之埋植銅,鋁螺帽 THRE ADEDINSER TS FO R PLA STICINJEC TIONMOULD INGS鈦螺帽TITAN IUM N UTS 壓邊螺帽+盤形華司組合 TOP LOCK NUTWITHCONIC AL WA SHERASSEM BLE U形螺帽U NUT S焊接螺帽 WE LD NU TS輪轂螺帽W HEELNUTS蝶形螺帽 WING NUTS鋅壓鑄螺帽 ZI NC DI E CAS TINGNUTS鋁釘A LUMIN UM NA ILS 馬達軸承軸心組件B EARIN G SHA FT（MO TOR）軸承軸心 BEAR ING S HAFT開口鉚釘 BIFU RCATE D RIV ETS 長形拉帽（長型螺帽） BIND ER PO STS（A NCHOR NUTS）拉帽 BLIN D NUT S (RI VET N UTS)拉釘B LINDRIVET S電梯壁虎 BO LT AN CHOR金屬黏著橡膠華司（雙層華司） BOND ED WA SHERS銅釘BRASS NAIL SC型扣環 C-RINGS小眼釘 CEIL ING H ANGER化學壁虎 CHE MICAL STUD實心梢 CLEV IS PI NS &STRAI GHT P INS 彈片 CL IPS 捲釘 CO IL NA ILS 冷鍛零件COLDFORMI NG PA RT開口梢 CO TTERPINS洋釘鉤CUP H OOKS弧型華司 CURV ED WA SHER外迫壁虎 CUTANCHO R插梢 DOWE L PIN捶釘DRIVE RIVE T壁虎 DROP IN A NCHORE型環 E-RI NGS 膨脹螺栓EXPAN SIONANCHO R BOL TS難眼釘 EY ELETS RIVE TS門鉤 GAT E HOO KS插溝銷 GR OOVED PINS有槽鋼釘 GRO OVEDSTEEL NAIL S火藥釘 GUN POWDE R NAI LS壁鉤 HAR DWALL HANG ERS 雙片夾壁虎 HEAV Y DUT Y SHI ELD A NCHORR型梢 HITC H PIN S（SNA P PIN S）空心釘 HO LLOWRIVET S洋釘 IRON NAIL SJ鉤 J HO OKK.D. F ITTIN G K.D. FIT TING閂鎖L ATCHE S & K EEPER ASSE MBLED S多衝程鉚釘M ULTI-STAGE RIVE RS錘釘壁虎N AIL I N ANC HOR 尼龍壁虎NYLON (MET AL) F RAMEANCHO R塑膠華司 NY LON W ASHER S其他特殊鉚釘OTHER SPEC IAL R IVETS樣品鉤 PEGB OARDHOOK吊圖鉤PICTU RE HA NGERS梢P INS 各式管夾,管束 PI PE HA NGER管塞P IPE P LUG 塑膠壁虎PLAST IC NY LON A NCHOR SPO P拉釘系列產品 PO P RIV ETS 快速插銷QUICK RELE ASE P INS R型扣環R-RIN GS扣環 RIN GS鉚釘 RIV ETS 圓棒鐵釘ROUND IRON NAIL ST型鐵釘 RO UND I RON T APE T NAIL圓棒鋼釘 ROU ND ST EEL N AILST型鋼釘 ROUN D STE EL TA PE TNAILSU型鋼釘 ROU ND ST EEL T APE U NAIL S橡膠華司 RU BBERWASHE RSS鉤 S H OOKSS型扣環 S-RI NGS 螺旋鋁釘SCREW ALUM INUMNAILS螺旋環(洋眼)SCREW EYES螺旋鉤及螺旋圈SCREW HOOK & SC REW R INGS螺絲鉤SCREW HOOK S螺旋鐵釘 SC REW I RON N AILS螺旋鋼釘 SCRE W STE EL NA ILS 中空鉚釘SEMI-TUBUL AR RI VET 套管壁虎SLEEV E ANC HOR 實心鉚釘SOLID RIVE TS特殊華司S PECIA L WAS HERS快速鉚接扣件 SP EED R IVETI NG開叉釘 SP LIT D RIVEANCHO RS彈簧梢 SP RINGPIN 彈簧華司SPRIN G WAS HERS彈簧蝴蝶夾 SPR ING W INGS折釘S QUARE HOOK S不鏽鋼鋼釘S TAINL ESS S TEELNAILS不鏽鋼中空釘S TAINL ESS S TEELSEMI-TUBUL AR RI VET 不鏽鋼斜紋釘 STA INLES S STE EL SL ANTIN G STR IPESNAILS 不鏽鋼華司 ST AINLE SS ST EEL W ASHER S鋼鐵釘 STE EL &IRONNAILS鋼釘STEEL NAIL SL型鋼釘 ST EEL T APE L NAIL S鐵馬鉤 STO RAGEHOOK吸盤鉤SUCTI ON HA NGERS蘭花鉤 SWAG HOOK S三角吊鉤 SW IVELLOOPHANGE RS地毯鋼釘T ACKED IRON NAIL S搓牙鐵釘 TH READNAILS大眼釘 TIEWIRESPADE STUD鈦合金鉚釘 TI TANIU M ALL OY RI VETS鈦合金膨漲螺絲T ITANI UM AL LOY E XPANS ION B OLTS鈦華司TITAN IUM W ASHER S齒型華司 TO OTH L OCK W ASHER S管形鉚釘 TU BULAR RIVE TS雙向迫緊器TURNB UCKLE節牙鋼釘 W/S TRIPSTEEL NAIL S華司 WASH ERS 波浪型華司 WAVE WASH ER拉漲壁虎W EDGEANCHO R線圈 WIRE鋅合金壁虎 ZI NC AL LOY F RAMEANCHO R螺絲,螺帽,五金,DIY扣件 AL L KIN DS OF PACD AGIN G SER IES 合金鋼工具 ALLO Y STE EL TO OLS 電子手把HANDL ES FO R ELE CTRON IC DE VICES六角板手 HEX AGONKEYS螺絲起子 POWE R BIT螺絲起子 SCR EWDRI VER B IT電動螺絲起子 AUTO FEEDSCREW DRIVE R工具套筒組件SOCKE T SET S套筒 SOCK ETS 板手 WR ENCH自動鍊帶螺絲槍A UTOFE ED SC REW D RIVER合金鋼線材盤元ALLOY STEE L WIR E ROD鋁合金錠 ALU MINUM ALLO Y球狀化線材A NNEAL ING W IRE & ROD黑鐵絲BLACK WIRE黃銅棒線 BRA SS WI RE &ROD 磨光棒鋼BRIGH T STE EL BA R (HE X/ROU ND/SQ UARE)銅合金線 COP PER A LLOYWIRE線切割線 E.D.M CUT TINGWIRE快削鋼線材盤元F REE C UTTIN G STE EL WI RE RO D鍍鋅鐵線 GA LVANI ZED S TEELWIRE線材I RON O R STE EL WI RE線材盤元I RON O R STE EL WI RE RO D洋白銅線 NI CKELSILVE R WIR E磷青銅線 PH OSPHO R BRO NZE W IRE 各種表面處理用噴砂材料 SAN D BLA STING MATE RIALS不鏽鋼條棒 ST AINLE SS ST EEL B AR (R OUND/HEX/S QUARE)不鏽鋼冷鍛線材 STAI NLESS STEE L COL D HEA DINGWIRE不鏽鋼線(抽線後) STAI NLESS STEE L DRA W WIR E不鏽鋼網線S TAINL ESS S TEELNET W IRE 不鏽鋼特殊線 STA INLES S STE EL SP ECIAL WIRE不鏽鋼彈簧線S TAINL ESS S TEELSPRIN G WIR E不鏽鋼線材S TAINL ESS S TEELWIRE不鏽鋼線材及盤元STAIN LESSSTEEL WIRE & RO D棒鋼 STEE L BAR(HEX/ROUND/SQUA RE) 鈦、鋯、鉬、鈮等螺絲、零件、材料 TI、ZR、MO、NB P ARE M ETALBOLTS PART S鋅合金錠 ZI NC AL LOY 立體/平面雕刻機3D DIE-SINK ING M ACHIN E/ENG RAVIN G MAC HINE轉回90度輾線頭機 90°R EVOLV ING W IRE T WISTI NG MA CHINE乾燥機 AIRDRYER氣動拉釘機 AI R RIV ETER鋁,低合金熔解熱處理爐 AL UMINU M & L OW AL LOY M ELTIN G FUR NACE鋁散熱器燒焊熱處理爐 ALU MINUM BRAZ ING F URNAC E FOR ALUM INUMCONDE NSER不鏽鋼線材連續式光輝熱處理退火爐 AN NEALI NG FU RNACE SPEC IALLY FORSTAIN LESSWIRE小型脫油機 ANT I-OIL MACH INE 自動包裝機 AUTO MATIC PACK ING M ACHIN E螺絲自動檢查設備 AUT OMATI C SCR EW SO RTING MACH INE 自動送鎖螺絲機 AU TOMAT IC SC REWIN G MAC HINE螺絲割尾加工機械AUTOM ATICTHREA D SLO TTING MACH INE 螺絲製造成型機械A UTOMA TIC T RIMMI NG MA CHINE箱式滲碳氮化爐BATCH TYPE CARB URIZI NG &MITRI DINGFURNA CE鐘罩式退火(球化)爐BELLTYPESPHER OIDIZ ING A NNEAL ING F URNAC E拉帽成型機B LINDNUT F ORMER S拉釘打頭機B LINDRIVET HEAD ING M ACHIN E螺絲(栓)成型機 BOL T FOR MERS螺絲、螺帽成型機BOLTFORME RS, N UT FO RMERS, HEA DERS螺栓模BOLTHEADI NG DI ES螺絲、螺帽熱處理 BO LT,NU T & S CREWS HEAT TREA TMENT螺絲、螺帽熱處理爐 BOL T,NUT & SC REWSHEATTREAT MENTFURNA CES 圓剪式打頭機 BUS H CUT-OFFHEADI NG MA CHINE圓剪式空心打頭機 BUSH CUT-OFF H OLLOW HEAD ING M ACHIN E主模 CARB IDE D IES 剪模 CA RBIDE QUIL LS不鏽鋼螺絲,扣件連續式光輝調質淬火爐 CA RBURI ZINGFURNA CE FO RSTA INLES S FAS TENER球狀化電氣炖爐CARBU RIZIN G FUR NACE,VACUU M & B ELL T YPE F URNAC E 流氣式箱型爐(箱式,坑式,台車式,連續式)CIRCU LATIO N FUR NACE(BOX,PIT,T RUCK,CONTI NUOUS TYPE)CN C電腦雕刻機 CNC ENGR AVING MACH INE 捲釘製造機 COIL NAIL COLL ATOR連續式光輝滲碳,淬火,回火爐 CONT INUOU S BRI GHT C ARBUR IZING &HA RDENI NG FU RNACE連續式光輝滲碳淬火爐 CO NTINU OUS B RIGHT CARB URIZI NG QU ENCHI NGFU RNACE連續式光輝調質淬火爐 CO NTINU OUS B RIGHT HARD ENING QUEN CHINGFURN ACE 中,高熱鍍鋅光輝連續爐 CON TINUO US BR IGHTHEATTREAT FURN ACE 連續式光輝熱處理爐(不鏽鋼,硬銲) CO NTINU OUS B RIGHT TREA TMENT (FOR STAI NLESS,BRAZ ING)連續式光輝熱處理爐 CONT INUOU S TYP EBRI GHT H EAT T REATM ENT F URNAC E耐腐蝕表面處理爐(耐鍊) CORR OSION RESI STANC E OFSURFA CE TR EATME NT FU RNACE剪刀(螺絲模)CUT-O FF KN IVES集塵設備 CYCL ONE E QUIPM ENT 各種碳化鎢製品設計製造 DES IGN & MANU FACTU RE OF TUNG STENCARBI DE PR ODUCT S模具 DIES & TO OLS 鑽尾模D RILLPOINT DIES耐衝螺絲成型模具 FAST ENERFORMI NG DI ES螺絲、螺帽品檢量測儀器 FAST ENERS INSP ECTIO N ANDMEAS UREME NTS’I NSTRU MENTS精密過濾器 FI LTER滾溝牙板 FLAT KNUR LINGDIES一般線材,盤元,退火爐 GE NERAL WIRE,WIRE RODANNEA LINGFURNA CE手動拉釘鉗HANDRIVET ER倒立式滑落型伸線機H ANDST AND T YPE W IRE D RAWIN G MAC HINE白鐵針HEADE R PUN CHESFOR S TAINL ESS B OLT 三角,四角,六角針HEADE R PUN CHESIN VA RIOUS DRIV ES(1)米字,一字,梅花,零號針HEADE R PUN CHESIN VA RIOUS DRIV ES(2)一字六角邊沖頭HEADE R PUN CHESIN VA RIOUS DRIV ES(3)螺絲打頭機 HE ADING MACH INE 六角沖針HEX P INS 六角沖模HEX R ECESS PUNC HES 六角沖模HEX T RIMMI NG DI ES螺絲製造高速搓牙機械HIGHSPEED AUTO MATIC THRE AD RO LLINGMACH INE 高中低週波感應加熱爐 HIGH,MEDI UM,LO W FRE QUENC Y IND UCTIO NHEA TER 空心打頭機 HOLL OW HE ADING MACH INE 熱鍛造機HOT F ORMER沖銷KNOCK OUT P INS 雷射/影像篩選機L ASER/OPTIC AL SO RTING MACH INE F OR SC REWS立式輸送機 LOA DER 機械螺絲牙板 MAC HINESCREW THRE AD RO LLING DIES PLAT ES沖床用的沖具 MANU FACTU RE OF PUNC H FOR PRES S DIE螺絲,螺帽用的沖具 MAN UFACT URE O F PUN CH MA KINGBOLTS ANDNUTS迷你成型機 MIN I-FOR MERS鐵釘滾牙機 NAI L ROL LINGMACHI NE鐵釘模具N AILSDIE 成品自動收線機 NO N-STO P COI LER 精抽自動收線機 NO N-STO P COI LER (SKINP ASS)螺帽模NUT F ORMIN G DIE S螺帽成型機N UTS F ORMER S螺帽攻牙機N UTS T APPIN G MAC HINE特殊零件成型機P ARTSFORMI NG MA CHINE腳踏板系列自動組立專用機PEDAL AUTO MATIC ASSE MBLIN G MAC HINE十字四角複合針P H+SQCOMBI NATIO N PUN CHES四角十字沖模十字沖模P HILLI PS PU NCHES十字割溝沖模P HILLI PS SL OTTED PUNC HES 沖針殼P IN HO LDERS鎖用中心零件P INS T AILPI ECE 拋光機/磨光台 PO LISHI NG MA CHINE手握式螺絲自動供給鎖緊機PORTA BLE S CREW-DRIVI NG MA CHINE粉末治金燒結,黑化爐 PO WDERMETAL LURGY &ST EAM T REATM ENT F URNAC E米字沖模 PO ZI PU NCHES沖模PUNCH DIES沖子PUNCH PINS沖針沖床引伸模具 PU NCHIN G DIE S羅拉成型機R OLLER S FOR MERSRX,D X瓦斯變成爐,AX氨氣分解爐 RX,D X GAS GENE RATOR,AX A MMO G ASGE NERAT OR鹽浴式熱處理爐 SAL T BAT H HEA T TRE ATMEN T FUR NACE各式表面處專用噴砂機 SAN D BLA STING MACH INE F OR SU RFACETREA TMENT螺絲自動組合華司機器 SC REW & WASH ER AS SEMBL Y MAC HINEFOR S EMS 機(踏)車用螺絲成型機 SCR EW FO R MOT ORCYC LE OR BICY CLE H EADIN G MAC HINE螺絲夾尾模 SCR EWS T AIL P OINTDIES鑽尾螺絲成型機S ELF-D RILLI NG SC REW F ORMIN G MAC HINE鑽尾模具 SELF-DRIL LINGSCREW MAKI NG DI ES止付螺絲成型機 SET SCRE WS FO RMERS梅花沖頭 SIX LOBE PUNC HES 一字沖模SLOTPUNCH ES套筒成型機SOCKE TS FO RMERS碳鋼盤元,線材,球狀化熱處理退火爐SPHER OIDIZ ING A NNEAL ING F URNAC E FOR STEE L WIR E一般線材,盤元,螺絲合金炖爐 SP HEROI DIZIN G BRI GHT A NNEAL ING F URNAC E 球狀化熱理爐SPHER OIDIZ ING H EAT T REATM ENT F URNAC E四角孔針具S Q PUN CHES四角沖模 SQUA RE RE CESSPUNCH ES不鏽鋼鑽尾螺絲割尾S TAINL ESS S TEELSELFDRILL ING S CREWMILLE DPOI NT鑽子 TAP攻牙機 TAPP ING M ACHIN E自攻螺絲牙板TAPPI NG SC REW T HREAD ROLL ING D IES P LATES螺絲攻、車刀、模具 TAP S DIE S & T OOLS鐵氟龍(TEFLO N)及琺瑯燒付爐T EFLON COAT ING F URNAC E搓牙機鐵屑牙離裝置 TH READCHIPSEPAR ATOR滾牙輪THREA D ROL LINGDIES牙板T HREAD ROLL ING D IES P LATES螺絲搓手機 TH READROLLI NG MA CHINE精密油壓滾牙機THREA D ROL LINGMACHI NES 貨物捆綁系統 TIE DOWN HARD WARE彈簧機週邊零件T OOLIN G PER IPHER AL CO MPONE NT OF SPRI NG MA CHINE六角整頭模 TR IMMIN G DIE S HEX AGON碳化鎢模具 TUN GSTEN CARB IDE D IEU NILOC K SEL F-LOC KINGAND S EAL-L OCKIN G UNI LOCKSELF-LOCKI NGAN D SEA L-LOC KINGFASTE NERS電鍍化學原料 VA RIOUS ELEC TROPL ATING CHEM ICALS立式單雙層連續伸線機 VE RTICA L TYP E SIN GLE D ECK W IRE D RAWIN G MAC HINE溫鍛造機 WARM FORM ER伸線機 WI RES D RAWER特殊鉚合扣件C OLLAR S (ABLIND FAST ENERFOR H UCK I NTL)電器銀接點 CON TACTPOINT螺絲D IY包裝系列 DIY SCRE WS PA CKING SERI ES自攻螺紋襯套 ENSA T THR EAD I NSERT螺絲、螺帽成型攻牙專用油FORMI NG &TAPPI NG OI LS FO R BOL TS &NUTSFORME RS鉸鏈 HIN GES 熱浸鍍鋅螺絲,螺帽HOT D IP GA LVANI ZINGBOLTS & NU TS工業用鍊I NDUST RIALSTEEL LINK CHAI NS安全護套K-SERT機車離合器零件MANUF ACTUR E OFMOTOR CYCLE’S CV T PAR TS鏡托 MIR ROR H OLDER S螺絲套筒 NU T SET TERS尼龍頭（用於螺絲頭部） NY LON H EAD（F OR SC REWS）尼龍圈（用於防鬆螺帽）N YLONRING（FOR L OCK N UTS）O.E.M. 組件 O.E.M. PA RTS 精密加工元件 PRE CISELATHE CUTT ING P ARTS精密車床零組件P RECIS ION T URNIN G PAR T沖壓零件 PU NCHIN G PAR TS螺紋護套R ECOIL INSE RTS 軛鐵(T型鐵、U型鐵) T-Y OKE,U NDERYOKE喇叭頭軛鐵 U-Y OKE,T-YOKE FORSPEAK ER輪子零件W HEELCOMPO NENT木螺絲牙板 WOO D SCR EW DI ES。
最全紧固件中英文对照
最全紧固件中英文对照，外贸必备词典！一、紧固件Fasteners标准紧固件StandardFasteners非标准紧固件NonstandardFasteners特殊紧固件SpecialFasteners汽车紧固件AutomotiveFasteners铜制紧固件BrassFasteners航天用紧固件AerospaceFasteners精密紧固件PrecisionFasteners化学紧固件ChemicalFasteners摩托车紧固件MotorcycleFasteners不锈钢紧固件StainlessSteelFasteners铁道紧固件RailwayFasteners防松紧固件Self-lockingFasteners高强度紧固件HighstrengthFastenersPEM紧固件PEMFasteners钢结构紧固件SteelStructuralFasteners压铆紧固件Self-ClinchingFasteners铝制紧固件AluminumFasteners钛合金紧固件TitaniumAlloyFasteners尼龙紧固件NylonFasteners精制紧固件FinishedFastener粗制紧固件UnfinishedFastener螺纹紧固件ThreadedFastener半精制紧固件Semi-FinishedFastener抗剪紧固件ShearFastener抗拉紧固件TensionFastener面板紧固件PanelFasteners二、螺栓Bolts六角头螺栓HexagonHeadBolts六角法兰面螺栓HexagonFlangeBolts轨道螺栓（鱼尾螺丝）TrackBolts高强度螺栓HighStrengthBolts地脚螺栓EyeletBolts马车螺栓CarriageBolts护拦螺栓GuardrailBots焊接螺栓WeldBolts双头螺栓DoubleEndBolts钢结构连接副StructuralBolting内六角螺栓HexSocketBolts合金钢螺栓AlloySteelBolts复合材料用螺钉（夹板用）ParticleBoardScrews犁壁螺钉PlowBolts不锈钢木螺丝StainlessSteelWoodScrews套挂螺栓及螺钉ToggleBolts钛合金膨胀螺钉TitaniumAlloyExpansionBolts不锈钢高低牙螺钉StainlessSteelHigh-LowThreadScrews 不锈钢机械螺钉StainlessSteelMachineScrews不锈钢钻尾螺钉StainlessSteelSelfDrillingScrews不锈钢自攻螺钉StainlessSteelSelfTappingScrews不锈钢自削螺钉StainlessSteelThreadCuttingScrews不锈钢三角牙螺钉StainlessSteelTri-LobularThreadScrews 不锈钢宽牙螺钉StainlessSteelCoarseThreadScrews开槽沉头螺钉SlottedFlatCountersunkHeadMachineScrews 开槽盘头螺钉SlottedPanHeadMachineScrews十字槽盘头螺钉CrossRecessedPanHeadMachineScrews 滚花头台阶螺钉KnurledThurmbScrews六角头木螺钉HexagonHeadWoodScrews平头滚花螺钉KnurledThinThumbScrews?四、螺母/螺帽Nuts六角螺母HexagonNuts六角盖形螺母HexCapNuts六角锯齿螺母HexSerratedNuts六角法兰螺母HexFlangeNuts六角平面螺母HexFlatNuts六角厚螺母HexThickNuts重型六角开槽螺母HeavyHexagonSlottedNuts高脚螺母HexCouplingNuts(HighNuts)圆螺母RoundNuts四角螺母/四方螺母SquareNuts四方焊接螺母SquareWeldNuts四爪螺母Four-ClawNuts管用螺母PipeNuts轮壳螺母WheelNuts蝶型螺母WingNutsU形螺母UNutsT形螺母TNuts环首螺母EyeNuts齿形螺母KepNuts齿花螺母ClinchNuts焊接螺帽WeldNuts压铆螺母Self-clinchingNuts高张力螺母HighStrengthNuts建业用螺母StructuralNuts不锈钢螺母StainlessSteelNuts铜螺母BrassNuts铝螺母AluminumNuts合金钢螺母AlloySteelNuts重型车螺母HeavyDutyWheelHubNuts铁器焊接袋帽AcornCapNuts金属预置扭矩式螺母All-MetalPrevailingTorqueTypeNuts壁虎螺母AnchorNuts大尺寸螺母BigSizeNuts铁盖袋帽ClosedEndAcornNuts盘形华司螺母ConicalWasherNuts铁盖+尼龙圈组合盖帽Din986DomedCapNuts法兰尼龙盖帽FlangeNylonInsertLockNuts平面华司螺母FlatWasherNuts六角割沟螺母HexSlottedNuts自锁螺母Self-LockingNuts制止螺母SlidingNutsSLN-自动防松螺母SLNSelf-LockingNuts特殊螺母SpecialNuts弹簧螺母SpringNuts不锈钢法兰螺母StainlessSteelFlangeNuts不锈钢六角轮缘尼龙螺母StainlessSteelFlangeNylonInsertLockNuts 不锈钢六角重型螺母StainlessSteelHeavyHexNuts不锈钢六角螺母StainlessSteelHexNuts不锈钢尼龙嵌入螺母StainlessSteelNylonInsertLockNuts普通六角螺母HexNuts六角重型螺母HeavyHexNuts薄型螺母HexJamNuts尼龙嵌入防松螺母NylonInsertLockNuts尼龙锁紧螺母NylonCageNuts机械螺丝用六角螺母HexMachineScrewNuts米制六角开槽螺母MetricSlottedHexNuts轨道螺栓用方螺母TrackBoltNuts米制六角金属锁紧螺母PrevallingTorqueHexagonNuts开槽螺母SlottedRoundNuts六角开槽薄螺母HexagonSlottedThinNuts?五、螺柱Studs?压铆螺柱Self-ClinchingStuds铜螺柱BrassStuds焊接螺柱WeldStuds双头螺柱DoubleEndStuds六角螺柱HexStuds支撑卡柱Self-ClinchingStandoffs?六、垫圈Washers弹簧垫圈SpringWashers/SpringLockWashers宽型弹簧垫圈Extra-dutyHelicalSpringLockWashers杯型垫圈Cupwashers波形垫圈WaveWashers内齿垫圈InternalToothWashers外齿垫圈ExternalToothWashers铜垫圈CopperWashers方垫圈SquareWashers密封垫圈SealingWashers碟形弹簧垫圈DiscSpringWashers外舌止动垫圈ExternalTabWashers高强度垫圈Highstrengthenwashers橡胶垫圈RubberWashers锁紧垫圈LockWashers平垫圈PlainWashers鞍型弹性垫圈CurvedSpringWashers锯齿锁紧弹性垫圈Toothedlockwashers外锯齿锁紧垫圈SerratedLockWashers锥形垫圈TaperWashers重型弹簧垫圈HeavySpringLockWashers尼龙垫圈NylonWashers淬硬钢垫圈HardenedSteelWashers?七、铆钉Rivets?平头铆钉FlatHeadRivets击芯铆钉DriveRivets彩色铆钉ColoredRivets沉头铆钉CountersunkHeadRivets半沉头铆钉OvalCountersunkHeadRivets平锥头铆钉ConeHeadRivets抽芯铆钉BlindRivets开口铆钉SplitRivets开口型抽芯铆钉OpenEndBlindRivets拉铆钉PopRivets封闭铆钉ClosedEndRivets封闭性抽芯铆钉SealedTypeBlindRivets塑料铆钉PlasticRivets空心铆钉TubularRivets环槽铆钉RingGrooveRivets单鼓型铆钉Single-GripRivets圆头铆钉RoundHeadRivets高沉头铆钉CountersunkHeadRivets铝铆钉AluminumRivets实心铆钉SolidRivets沉头实心铆钉CountersunkHeadSolidRivets灯笼铆钉LanternBlindRivets半空心铆钉Semi-TubularRivets圆头半空心铆钉Semi-tubularPanHeadRivets异型铆钉SpecialRivets不锈钢铆钉StainlessSteelRivets双鼓型铆钉Multi-gripRivets高强度铆钉HighStrengthRivets台阶铆钉StepRivets面板铆钉TabletRivets开花型抽芯铆钉FloweringBlindRivets拉花型抽芯铆钉PeelTypeBlindRivets沟槽型抽芯铆钉GroovedTypeBlindRivet铆接工具RivetingTool?八、壁虎（膨胀螺栓）Anchors/ExpansionBolts化学锚栓ChemicalAnchors打入式壁虎HammerDriveAnchors内迫壁虎DropinAnchors重型壁虎HeavyDutyAnchors锤钉壁虎HitAnchors中空壁虎HollowWallAnchors套管壁虎SleeveAnchors插片壁虎CeilingAnchors门窗、地板专用壁虎NylonFrameAnchorsorMetalframeAnchors电梯壁虎BoltAnchors车修壁虎WedgeAnchors鱼眼壁虎TieWireAnchors外迫壁虎CutAnchors塑料膨胀PlasticAnchors不锈钢重载胀栓HeavyDutyExpansionAnchors象脚壁虎ElephantFootAnchors长型兰花夹ShortStrapAnchors?九、销Pins?开口销SplitPins圆锥销TaperPins锁销LockPins销轴ClevisPinswithhead槽销GroovedPins弹性销SpringPins圆柱销ParallelPins弹性圆柱销SlottedSpringPins带孔销Pinswithsplitpinhole?十、挡圈Circlips/Rings?开口挡圈Erings孔用挡圈Circlipsforholes轴用钢丝挡圈RoundwireSnapRingsforshaft 轴肩挡圈Ringsforshoulder夹紧挡圈GripRings轴用卡簧Circlipsforshafts带齿轴用挡圈RetainingRingswithLugsforshafts 钢丝锁圈RoundwireCirclips锥形锁紧挡圈LockRingswithconepins?十一、其他Others?牙条ThreadedRod冲压件Stampings平键ParallelKeys半圆键WoodruffKeys扳手Spanners钢丝螺套WireThreadInsert自动车床车削件CNCTurningParts齿轮Gears模具Molds线材盘元Ironorsteelwirerod铰链Hinge表面处理SurfaceTreatment。
紧固件中英文对照表(Terminology for fastener)
非金属嵌件六角锁紧螺母Prevailing torque type hexagon nuts(with non-metallic insert)六角开槽螺母Hexagon slotted nuts六角开槽螺母细牙Hexagon slotted and castle nuts-Fine pitch thread六角螺母Hexagon nuts六角螺母－细牙Hexagon nuts-Fine pitch thread全金属六角锁紧螺母Prevailing torque type all-metal hexagon nuts120度半沉头铆钉120degree oval countersunk rivets120度沉头半空心铆钉120 degree countersunk head semi-tubular rivets120度沉头铆钉120 degree countersunk head rivetsT形槽用螺栓Bolts for T-Slot鞍形弹簧垫圈Curved single coil spring lock washers鞍形弹性垫圈Curved spring washers半圆头带榫螺栓Cup head nib bolts半圆头低方颈螺栓Cup square neck bolts with short neck半圆头方颈螺栓Cup head square neck bolts半圆头铆钉Round head rivets扁平头铆钉Thin head rivets扁圆头半空心铆钉Oval head semi-tubular rivets扁圆头铆钉Flat round head rivets标牌铆钉Rivets for name plate标准型弹簧垫圈Single coil spring lock washers, Normal type波形弹簧垫圈Wave single coil spring lock washers波形弹性垫圈Wave spring washers槽钢用方斜垫圈Square taper washers for slot section槽销Grooved pins侧面带孔圆螺母Round nuts with set pin holes in side沉头半空心铆钉Countersunk head semi-tublar rivets沉头带榫螺栓Flat countersunk nib bolts沉头方颈螺栓Flat countersunk square neck bolts沉头铆钉Countersunk head rivets沉头双榫螺栓Flat countersunk double nib bolts大半圆头带榫螺栓Cup head nib bolts with large head大半圆头方颈螺栓Cup head square neck bolts with large head大扁圆头半空心铆钉Truss head semi-tubuar rivets大扁圆头铆钉Truss head rivets带槽圆螺母Slotted round nuts带孔销Pins with split pin hole带锁圈的螺钉锁紧挡圈Lock rings with screw and circlip单耳止动垫圈Tab washers with log tab弹性圆柱销Spring-type straight pins-Slotted等长双头螺柱Double end studs地脚螺栓Eyelet bolts吊环螺钉Eyebolts蝶形螺母Wing nuts端面带孔圆螺母Round nuts with drilled holes in one face方螺母Square nuts方头凹端紧定螺钉Square set screws with cup point方头长圆柱端紧定螺钉Square set screws with long dog point方头长圆柱球面端紧定螺钉Square set screws with long dog point and rounded end方头倒角端紧定螺钉Square set screws with chamfered end方头短圆柱锥端紧定螺钉Square set screws with short dog point and cone end非金属嵌件六角法兰面锁紧螺母Prevailing torque type hexagon nuts with flange (with non-metallic insert)封闭型扁圆头抽芯铆钉Mushroom head break mandrel closed end blind rivets封闭型沉头抽芯铆钉120 deg flush head break mandrel closed end blind rivets盖形螺母Acorn nuts工字钢用方斜垫圈Square taper washers for I section管状铆钉Pope type rivets滚花薄螺母Knurled nuts滚花高螺母Knurled nut with collar滚花高头螺钉Knurled thumb screws滚花头不脱出螺钉Knurled thumb screws with waisted shank滚花小头螺钉Knurled screws with small head焊接方螺母Square weld nuts焊接六角螺母Hexagon weld nuts环形螺母Lifting nuts活节螺栓Eye bolts机动弧焊用焊接螺柱Weld studs for are welding夹紧挡圈Grip rings开槽半沉头不脱出螺钉Slotted raised countersunk head screws with waisted shank开槽半沉头螺钉Slotted raised countersunk head screws开槽半沉头自攻螺钉Slotted raised countersunk head tapping screws开槽长圆柱端紧定螺钉Slotted set screws with long dog point开槽沉头不脱出螺钉Slotted countersunk head screws with waisted shank开槽沉头螺钉Slotted countersunk head screws开槽沉头自攻螺钉Slotted countersunk head tapping screws开槽盘头螺钉Slotted pan head screws开槽带孔球面圆柱头螺钉Slotted capstan screws开槽盘头螺钉Slotted pan head screws开槽盘头自攻螺钉Slotted pan head tapping screws开槽平端紧定螺钉Slotted set screws with flat point开槽球面大圆柱头螺钉Slotted large raised cheese head screws开槽球面圆柱头轴位螺钉Slotted raised cheese head with shoulder开槽无头轴位螺钉Slotted shoulder screws开槽圆柱端定位螺钉Slotted setscrews with dog point开槽圆柱头螺钉Slotted cheese head screws开槽圆柱头轴位螺钉Slotted cheese head screws with shoulder开槽锥端定位螺钉Slotted setscrews with cone point开口挡圈“E” rings开口垫圈Washers with split开口销Split pins开口型扁圆头抽芯铆钉Mushroom head break mandrel blind rivets开口型沉头抽芯铆钉120 deg flush head break mandrel blind rivets开尾圆锥销Taper pins with split空心铆钉Tubular rivets孔用弹性挡圈Circlips for holes孔用钢丝挡圈Roundwire snap rings for hole扣紧螺母Tight nuts六角法兰面螺母Hexagon nuts with flange六角法兰面自钻自攻螺钉Hexagon flange head self-drilling tapping screws六角头螺栓、弹簧垫圈和平垫圈组合件Hexagon head bolt, single coil spring lock washer and plain washer assemblies六角头螺栓和平垫圈组合件Hexagon head bolt and plain washer assemblies六角头螺栓和外锯齿锁紧垫圈组合件Hexagon head bolt and serrated lock washer external teeth assemblies六角头头部戴槽螺栓Hexagon bolts with slot on head六角头头部带孔螺栓Hexagon blots with wire holes on head六角头自攻螺钉Hexagon head tapping screws六角头自攻螺钉和大垫圈组合件Hexagon head tapping screw and plain washer assemblies六角头自攻锁紧螺钉Hexagon head thread forming screws六角自锁螺母Self-locking nuts, hexagon内齿锁紧垫圈Lock washers internal teeth。
紧固件专用词中英文对照
英文英文简写中文头部形状(Head style)Pan Head Pan HD 盘头Flat HeadFlat HD 平头或countersunkHeadCSHD沉头Round HeadRD HD圆头Oval Head OL HD 半沉头Pan washer Head Pan wash HD 垫圈盘头Socket Hd Skt HD 六角圆柱头Hexagon cap Head Hex Cap HD 外六角头Square shouder Head SQ SDR HD 方肩头Cheese Head Ches HD 圆锥头Wing Head Wing HD 带翼头穴型状(Driver style)Philips cross recessedPhil十字Pozidriv cross recessedPozi 米字Torx Torx内梅花6-lobular 6-lobu SocketSkt内六角Slot Slt 一字槽表面处理(coating)Znic blue ZB 兰锌Zinc blackZBK 黑锌Zinc yellow(Zinc oliver)ZY (ZO)黄锌Zinc white ZW 白锌Silver Plating Sil Plat 镀银Nickel Plating Nic Plat 镀镍Dacromet Dacr 达克罗Heat dip zinc HDZinc 热浸锌示意图紧固件专用词中英文对照螺丝(screw)No.1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950常用英文单词及简写形式单词简写screwnutwasherheadthreadcoatingrivetstandoffdriverhexagontoothlockspringwavepitchpartial threadPTFull ThreadsilverconeEco-synThread FormingSelf Tappingpinshaftsteelstainless steelBrass(Cu)AluminumRubbermachine screwSEM screwMaterialGradeFinishPointClampholeMetricinternalexternalthicknesslengthANSIJISISONFEDINscrnutwashhdthrecoatrivstdoffdrivhexatoothlcksprwavepitchP TPTFTsilvconeEcoTFself tapppinShafStSSBras(Cu)ALRubmech scrSEM Scrmaterial//GDFinishPointClam内外六角钉////Metcric//Intext头螺纹镀层铆钉中文螺丝螺母垫圈穴六角齿锁弹簧波浪型牙距半螺纹一种螺纹形式全螺纹银锥形30度牙的一种螺纹自攻螺纹自切屑螺纹销轴铁不锈钢铜铝橡胶机制螺丝组合螺丝材料等级表面处理点夹子内外厚度长度孔公制德标美标日标国际标准法标国家标准质量QualityGB//。
紧固件-中英文对照.doc
紧固件-中英文对照.docNo.xx 简写中文1screw scr螺丝2nut nut 螺母3washer wash垫圈4head hd 头5thread thre 螺纹6coating coat 镀层7rivet riv 铆钉8standoff stdoff 内外六角钉9driver driv 穴10hexagon hexa六角11tooth tooth 齿12lock lck 锁13spring spr 弹簧14wave wave 波浪型15pitch pitch 牙距16partial thread PT 半螺纹17PT PT一种螺纹形式18Full Thread FT全螺纹19silver silv 银20cone cone锥形21 Eco-syn Eco 30度牙的一种螺纹22 ThreadForming TF自攻螺纹23 Self Tapping self tapp自切屑螺纹24 pin pin 销25shaft Shaf轴26steel St铁27stainless steel SS不锈钢28Brass(Cu) Bras(Cu)铜29Aluminum AL 铝30Rubber Rub橡胶31machine screw mech scr机制螺丝32SEM screw SEM Scr组合螺丝33Material material 材料34Grade GD等级35Finish Finish表面处理36Point Point 点37Clamp Clam夹子38internal Int 内39external ext 外40thickness /厚度41length /xx42 hole /xx43 Metric Metcric 公制44 DIN /德标45 ANSI /美标46 JIS /日标螺丝相关参数英语对照A:Machine Screw:机械螺丝B:Tapping Screw:自攻螺丝 (分使用于金属与使用于塑料二种 ) B-1: Sheet Metal Tapping Screw. 铁(板牙自攻螺丝 )B-2: Plastic Tapping Screw.塑(料用 ,自攻螺丝 )C:Wooden Screw 木:工螺丝D:Drywall Screw :水泥墙螺丝常见螺丝材质 :a.Low Carbon Steel 低:碳钢b. SS-304 : Stainless Steel 304c.SS-302: Stainless Steel 302结:构韧性较好d.Aluminum 5052 :铝合金 5052d.Brass:xxe.Bronze:青铜f.UNS C11000 Copper:锑铜Finish Code:外观处理规格Head Code:头部外型螺丝型号 Drive Code:头部剖沟 ,特征型号Length Code:螺丝长度(mm)A-1: Thread Code:螺丝型号A-2: Length Code:螺丝长度 :A-3: Drive Code/头部剖沟 ,特征 .a. Slotted:一字 ( Minus )b. Phillips:十字 ( Plus )c.Phil-Slot:一字 / 十字d.Hex Scoket:xxe.One Way:单向 (只可锁入 ,不可退出 ) A-4: Head Code/头部外型 .a. Flat:平头 (锁入后 ,顶部与工作件齐平 )b.Oval:色拉头c.Round:圆头d.Pan:圆扁头e.Truss:大圆扁头f.Hex :六角头A-5: Finish Code/外观处理 .a. Z: Zine-Plated:镀锌b. Ni: Ni-Plated:镀镍c.Tin-Plated:镀锡d.Zine Plated / Green Iridite:镀锌绿膜处理 .e.Radiant Plated:镀五彩f.Passivate:抗氧化处理 .g.Alodial Finish:无外观处理螺纹大径： Major Diam螺纹中径： Pitch diam螺纹底径： Minor diam通止规： Go/No go gage机械性能： mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆 Case carburization表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinellxx 氏硬度Metallography microscope 金相显微镜Salt spray device盐雾试验箱Tensile testing machine拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8机械性能 8 级原材料： Raw material 球化退火： Annealing冷拔： Drawingxx：Forming机加工： Machining螺纹成型： Roll Threading热处理： heat-treatment表面处理： finish去氢： Lustrating hydrogen检验： Inspection包装： Packing入库： Stocking车床： lathe磨制： grinding红打： hot forging冲压： punchingDiameter 直径Lengthxx各类紧固件标准件产品xx 对照插片壁虎 Steel Ceiling Anchors内迫壁虎 Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力 xx 壁虎 Wedge Anchors外迫壁虎 Cut Anchors化学壁虎 Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽 Strut Nuts兰花夹系列 T oggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎 Sleeve Anchors打入式壁虎鱼形尼龙壁虎 Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎 Hit Anchors电梯壁虎 Bolt Anchors重载壁虎 Heavy duty anchors两片夹 Loxin Masonry Anchors定位螺栓 Set Bolts长型兰花夹 Short Strap Anchors工具棒 Drop in Setting Tools象脚壁虎 Elephant foot anchors水泥预埋件 Concrete Insert翻边胀轴 Drop in Anchor with Lip冲件 Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽 Hex Coupling Nuts(High Nuts) 圆螺帽 Round Nuts 四角螺帽 Square Nuts管用螺帽 Pipe Nuts轮壳螺帽 Wheel Nuts蝶型螺帽 Wing NutsU 形螺帽 U NutsT 形螺帽 T Nuts环首螺帽 Eye Nuts齿形螺帽 Kep Nuts齿花螺帽 Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽 Weld Nuts高张力螺帽 Heigh Strength Nuts建业用螺帽 Structural Nuts不锈钢螺帽 Stainless Steel Nuts铜螺帽 Brass Nuts铝螺帽 Aluminum Nuts合金钢螺帽 Alloy Steel Nuts重型车螺帽 Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽 Anchor Nuts大尺寸螺帽 Big Size Nuts铁盖袋帽 Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖 +尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽 Self-Locking Nuts制止螺帽 Sliding NutsSln-自动防松螺帽 Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽 Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts 不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽 Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut六角螺丝 (栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角 xx 螺丝 Hex Lag Bolts四角螺丝 Square Head BoltsT 头螺丝 T Head Bolts环首螺丝 Eye Bolts内六角孔螺丝Hex Socket Cap Screws 固定螺丝 Set Screws螺椿栓 Stud Bolts螺旋椿 Screw Studs轮壳螺栓 Wheel Bolts翼形螺丝 Wing Screws自攻螺丝 Self Tapping Screws自削螺丝 Thread Cutting Screws钻尾螺丝 Self Drilling Screws旋入螺丝 Drive Screws机械螺丝 Machine Screws木螺丝 Wood Screws家具螺丝 Furniture Screws塑板螺丝 Chipboard Screws墙用螺丝 Drywall Screws基础螺栓 Foundation BoltsU 型螺栓 U Bolts勾头螺栓 Hook Bolts套挂螺丝 Toggle Bolts轨道螺栓 (鱼尾螺丝 ) Track Bolts耐候钢螺丝 Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓 High Strength Bolts剪力钉 (焊接螺丝 ) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems) 大尺寸螺栓 Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铜螺丝 Brass Screws铝螺丝 Aluminum Screws合金钢螺丝 Alloy Steel Screws电子螺丝 Electronic Screws微小精密螺丝Micro Screws塑料螺丝 Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝 Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts 拇指螺丝 Thumb Screws双头牙螺丝 Double End Screws Hanger Bolt车辆 (汽车 )螺丝、螺帽 Automotive Fasteners航天用螺丝 Aerospace Fasteners飞机特殊扣件Source Control BoltsxxBlind Bolts面板螺丝 Panel Fasteners电梯螺丝 Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝 One Way Lag Screws管夹螺丝 Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws 不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws 铰链螺丝 Hinge Screws货柜螺丝 Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝 Trilobular Thread Screws高低牙螺丝 High Low Screws夹板用螺丝 Particle Board Screws马桶螺丝 Toilet Closet Bolts特长螺丝 Special Longer Screws建业螺丝 Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws 其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws链带螺丝 Collated Screws水泥螺丝 Concrete Screws板模螺丝 Construction Bolts锌蝶螺丝 Die Cast Wing Screws; Zinc Alloy重型车螺丝 Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws 犁壁螺丝 Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws套挂螺栓及螺丝T oggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts 六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽 Hex Coupling Nuts(High Nuts)圆螺帽 Round Nuts四角螺帽 Square Nuts管用螺帽 Pipe Nuts轮壳螺帽 Wheel Nuts蝶型螺帽 Wing NutsU 形螺帽 U NutsT 形螺帽 T Nuts环首螺帽 Eye Nuts齿形螺帽 Kep Nuts齿花螺帽 Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts 焊接螺帽 Weld Nuts高张力螺帽 Heigh Strength Nuts建业用螺帽 Structural Nuts不锈钢螺帽 Stainless Steel Nuts铜螺帽 Brass Nuts铝螺帽 Aluminum Nuts合金钢螺帽 Alloy Steel Nuts重型车螺帽 Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽 Anchor Nuts大尺寸螺帽 Big Size Nuts铁盖袋帽 Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖 +尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽 Self-Locking Nuts制止螺帽 Sliding NutsSln-自动防松螺帽 Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽 Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts 不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽 Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽 Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材 Annealing Wire And Rod黑铁丝 Black Wire黄铜棒线 Brass Wire And Rod磨光棒钢 Bright Steel Bar(Hex/Round/Square)铜合金线 Copper Alloy Wire线切割线 E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod线材 Iron Or Steel Wire线材盘元 Iron Or Steel Wire Rod洋白铜线 Nickel Silver Wire磷青铜线 Phosphate Bronze Wire不锈钢条棒 Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线 (抽线后 ) Stainless Steel Draw Wire不锈钢线材 Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢 Steel Bar(Hex/Round/Square)转回 90 度碾线头机 90 讧 evolving Wire Twisting Machine 气动拉钉机 Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging 自动包装机 Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机 Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace 连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace 中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模 Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine 十字冲模 Header Punches In Various Drives成型冲模 Header Punches In Various Drives螺丝打头机 Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater空心打头机 Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌 Mechanical Galvanized迷你成型机 Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass)螺帽模 Nut Forming Dies螺帽成型模 Nuts Formers特殊零件成型机Parts Forming Maching冲模 Punch Dies冲子 Punch Pins罗拉成型机 Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine 止付螺丝成型机Set Screws Formers 套高成型机 Sockets Formers一般线材、盘元、螺丝合金炖炉Spheroidizing Bright Annealing Furnace 球状化热处理炉Spheroidizing Heat Treatment Furnace。
紧固件中英文对照
Description in Chinese 英文品名Desciption in English圆锥销Taper pins圆柱销Parallel pins开槽圆柱头螺钉Slotted cheese head screws开槽盘头螺钉Slotted pan head screws单耳止动垫圈Tab washers开口销Split cooter pins开槽半沉头木螺钉Slotted raised csk head wood screws 开槽半圆头木螺钉Slotted round head wood screws开槽沉头木螺钉Slotted countersunk head wood screws 平垫Plain washers平垫（带倒角）Mediun washers平垫Plain washers重型弹垫Spring lock washers,tang ends标准弹垫Spring lock washers,square ends鞍形弹垫Single coil spring lock washers弹簧止动垫圈Curved spring washers波形弹垫Wave spring washersT型方颈螺栓T-head blots with square neckT型双接头螺栓T-head bolts with double nip螺纹圆锥销Taper pins with threaded endT型头螺栓T-head bolts蝶型螺母（美制）Wing nuts America form蝶型螺母（德制）Wing nuts germany form蝶型螺母（美制）Wing screws America form蝶型螺母（德制）Wing screws germany form圆球型盖型螺母Ball knobs开槽带孔球面圆柱头蚴钉Slotted capstan screws开槽长圆柱端紧定螺钉Slotted set srews with full dog point开槽平端紧定螺钉（半牙）Slotted set srews with chamfered end 小六角特薄细牙螺母Pip nuts with thread外舌止动垫圈External tap小垫圈(用于圆柱头螺钉) Washers for cheese head screws方斜垫圈（U型）Square taper washers forU-section方斜垫圈（I型）Square taper washers forI-sections方垫圈Square washers开槽凹端紧定螺钉Slotted set with cup point六角薄螺母Hexagon thin nuts细牙六角薄螺母Hexagon thin nuts木螺钉专用垫圈Rounds washers for wood constructions密封帽Sealing caps,push-in type活节螺栓B型Eye bolts form B内舌止动垫圈Internal tab washers双耳止动垫圈Washers with two taps滚花高头螺钉Knurled thumb screws with collar开槽滚花高头螺钉Slotted knurled thumb screws with collar 滚花高螺母Knurled thumb nuts with collar滚花薄螺母Knurled thumb thin nuts锁紧垫圈Sealing washers轴用弹性垫圈Retaining rings for shafts(external),circlips孔用弹性垫圈Retaining rings for bores(internal),circlips方头带垫螺栓Square head bolts with collar方头圆柱底端螺栓Square head bolts with half dog point方头带垫关圆底端螺栓Square head bolts with collar,half dog pointT型槽螺母T-slot nuts单头螺柱Single end studs地脚螺栓Masonry bolts带槽圆螺母Slotted round nuts端面带孔圆螺母Round nuts with drilled holes in one face 开槽平端紧定螺钉Slotted set screws with flat point开槽锥端紧定螺钉Slotted set screws with cone point六角螺母Hexagon nuts方螺母-C Square nuts六角头螺钉Hexagon screws六角头圆柱端紧定螺钉Hexagon set screws with full dog point薄型方螺母-B Square nuts without bevel(pressed nuts)六角头木螺钉Hexgon head wood screw(coach screws)吊环螺钉Lifting eye bolts吊环螺母Lifting eye nuts圆锥型槽销Grooved pins,taper grooved圆锥型槽销（半槽）Grooved pins,taper grooved half length平行槽销（带倒角）Grooved pins,parallel grooved full length前端凹槽槽销Grooved pins,reverve grooved half length中部凹槽槽销Grooved pins,center grooved圆头槽销Grooved pins with round head沉头槽销Grooved pins with countersunk head六角螺母棒Turnuckles(center parts),made out of hexagon bar花蓝螺栓Turnuckles with eye bolt and hook bolt弹性圆柱销Spring pins,heavy type组合式盖型螺母Hexagon domed cap nuts开槽圆螺母(配合沟头扳手) Slotted round nuts for hook spammer圆螺母（带插销孔）Round nuts with set holes盘型弹簧垫圈Disc springs喉箍Hose clamps润滑油嘴（旋扭头）Lubricating nipples,button head管夹Shackles for conduiltsU型螺栓Stirrup bolts(U-bolts)球面垫圈Spherical washers,conical seats圆柱销Parallel pins厚六角螺母Hexagon nuts,1.5d厚六角法兰面螺母Hexagon nuts,1.5d with collar长六角螺母Hexagon nuts,3d外齿锁紧垫圈External teeth lock washers内齿锁紧垫圈Internal teeth lock washers外锯齿锁紧垫圈External teeth serrated lock washers内锯齿锁紧垫圈Internal teeth serrated lock washers开口挡圈Retaining rings for shafts(E-rings),circlips平键（A型）Parallel keys(form A)半圆键Woodruff keys嵌环（支撑环）Thimbles机器螺钉和垫圈组合件Screws and washers assemblies自攻螺钉和垫圈组合件Tapping screws and washer assemblies薄型带孔内六角圆柱螺钉Hexagon cocket head cap screws with hole,low head大六角头螺栓Hexagon head bolts with large head(friction grip nolts)大六角螺母Hexagon nuts with large wideth across flat(friction grip nuts)大垫圈Round washers for friction grip bolts楔型方垫圈Spuare taper washers for friction grip bolts on T-六角法兰面螺母Hexagon flange nuts全金属六角锁紧螺母（2型）Prevailing torque type hexagon nuts,all metallic nuts 轻型弹性圆柱销Spring pins,light type重型弹性圆柱销用垫圈Washers for bolts with heavy type spring pinssISO公制螺纹螺钉（多种头型）Thread forming screws for ISO-metric thread 自攻自钻螺钉（多种头型）Self-drilling tapping screws开槽切削螺纹螺钉（多种头型）Thread cutting screws十字槽切削螺纹螺钉（多种头型）Thread cutting screws cross recessT型四爪螺母Tee nuts with pronge钢结构用六角头螺栓连接副Hexagon head fitted bolts for steel structures开槽盘头自攻螺钉Pan head tapping screws with slot开槽沉头自攻螺钉countersunk flat head tapping screws with slot开槽半沉头自攻螺钉Raised sountersunk oval head tapping screws with slot六角头自攻螺钉Hexagon tapping screws圆柱头螺钉用弹簧垫圈Spring lock washers for screws with cylindrical heads十字槽盘头自攻螺攻Pan head tapping screws with cross recessed十字槽沉头自攻螺攻Countersunk flat head tapping screws with cross recessed十字槽半沉头自攻螺攻Raised countersunk oval head tapping screws with cross薄型内六角圆柱头螺钉Hexagon socket head cap screws with,reduced head十字槽盘头螺钉Pan head screws with cross recessed钢结构用垫圈Washers for steel structures钢结构用六角头螺栓Hexagon head bolts for steel structures内六角沉头螺钉Hexagon socket coutersunk head screws轴用钢丝挡圈Roundwire snap rings for shafts十字槽半沉头木螺钉Cross recessed raised countersunk head wood screws十字槽圆头木螺钉Cross recessed round head wood screws十字槽沉头木螺钉Cross recessed countersunk head wood screws螺纹护套(普通、自锁等) Ciol inserts,coarse,fine thread,silf locking大外径垫圈Washers,outside diameter appro.3d弹簧卡子sping cotter for a bolt平板螺栓Belting bolts(elevator bolts)干壁钉（墙板钉）Dry wall screws环型螺母Lifting nuts(eye nuts)圆螺母用止退垫圈Tab washer for slotted round nuts。
紧固件 中英文对照
No. 英文单词简写中文1 screw scr 螺丝2 nut nut 螺母3 washer wash 垫圈4 head hd 头5 thread thre 螺纹6 coating coat 镀层7 rivet riv 铆钉8 standoff stdoff 内外六角钉9 driver driv 穴10 hexagon hexa 六角11 tooth tooth 齿12 lock lck 锁13 spring spr 弹簧14 wave wave 波浪型15 pitch pitch 牙距16 partial thread PT 半螺纹17 PT PT 一种螺纹形式18 Full Thread FT 全螺纹19 silver silv 银20 cone cone 锥形21 Eco-syn Eco 30度牙的一种螺纹22 Thread Forming TF 自攻螺纹23 Self Tapping self tapp 自切屑螺纹24 pin pin 销25 shaft Shaf 轴26 steel St 铁27 stainless steel SS 不锈钢28 Brass(Cu) Bras(Cu) 铜29 Aluminum AL 铝30 Rubber Rub 橡胶31 machine screw mech scr 机制螺丝32 SEM screw SEM Scr 组合螺丝33 Material material 材料34 Grade GD 等级35 Finish Finish 表面处理36 Point Point 点37 Clamp Clam 夹子38 internal Int 内39 external ext 外40 thickness / 厚度41 length / 长度42 hole / 孔43 Metric Metcric 公制44 DIN / 德标45 ANSI / 美标46 JIS / 日标螺丝相关参数英语对照A: Machine Screw: 机械螺丝B: Tapping Screw: 自攻螺丝(分使用于金属与使用于塑料二种) B-1: Sheet Metal Tapping Screw. (铁板牙自攻螺丝)B-2: Plastic Tapping Screw. ( 塑料用, 自攻螺丝)C: Wooden Screw : 木工螺丝D: Drywall Screw : 水泥墙螺丝常见螺丝材质:a.Low Carbon Steel :低碳钢b. SS-304 : Stainless Steel 304c. SS-302: Stainless Steel 302 :结构韧性较好d. Aluminum 5052 :铝合金5052d. Brass: 黄铜e. Bronze: 青铜f. UNS C11000 Copper: 锑铜Finish Code: 外观处理规格Head Code: 头部外型螺丝型号Drive Code: 头部剖沟,特征型号Length Code: 螺丝长度(mm)A-1: Thread Code: 螺丝型号A-2: Length Code: 螺丝长度:A-3: Drive Code/ 头部剖沟,特征.a. Slotted: 一字( Minus )b. Phillips: 十字( Plus )c. Phil-Slot: 一字/十字d. Hex Scoket: 内六角e. One Way: 单向(只可锁入,不可退出)A-4: Head Code/ 头部外型.a. Flat: 平头(锁入后,顶部与工作件齐平)b. Oval: 色拉头c. Round: 圆头d. Pan: 圆扁头e. Truss: 大圆扁头f. Hex : 六角头A-5: Finish Code/ 外观处理.a. Z: Zine-Plated: 镀锌b. Ni: Ni-Plated: 镀镍c. Tin-Plated: 镀锡d. Zine Plated / Green Iridite: 镀锌绿膜处理.e. Radiant Plated: 镀五彩f. Passivate: 抗氧化处理.g. Alodial Finish: 无外观处理螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punchingDiameter 直径Length 长度各类紧固件标准件产品英语翻译对照插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力车修壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors) 强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角木牙螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts马车螺丝Carriage Bolts环首螺丝Eye Bolts内六角孔螺丝Hex Socket Cap Screws固定螺丝Set Screws螺椿栓Stud Bolts螺旋椿Screw Studs轮壳螺栓Wheel Bolts翼形螺丝Wing Screws自攻螺丝Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws旋入螺丝Drive Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts套挂螺丝Toggle Bolts突缘螺丝Flange Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems)大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铜螺丝Brass Screws铝螺丝Aluminum Screws合金钢螺丝Alloy Steel Screws电子螺丝Electronic Screws微小精密螺丝Micro Screws塑料螺丝Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts 拇指螺丝Thumb Screws双头牙螺丝Double End Screws Hanger Bolt车辆(汽车)螺丝、螺帽Automotive Fasteners航天用螺丝Aerospace Fasteners飞机特殊扣件Source Control Bolts拉栓Blind Bolts面板螺丝Panel Fasteners电梯螺丝Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws 不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws 铰链螺丝Hinge Screws货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws 其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws链带螺丝Collated Screws水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws犁壁螺丝Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线Copper Alloy Wire线切割线E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢Steel Bar(Hex/Round/Square)转回90度碾线头机90讧evolving Wire Twisting Machine气动拉钉机Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging 自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace 连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace 中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives成型冲模Header Punches In Various Drives螺丝打头机Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass)螺帽模Nut Forming Dies螺帽成型模Nuts Formers特殊零件成型机Parts Forming Maching冲模Punch Dies冲子Punch Pins罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉Spheroidizing Bright Annealing Furnace球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具Tools六角整头模Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd 电镀化学原料Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage 螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers 螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统Iso Quality Assurance System生产管理系统Production Control System物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stainless Steel Hread Rod马达轴承轴心组件Bearing Shaft(Motor)轴承轴心Bearing Shaft开口铆钉Blind Rivets长形拉帽Blind Rivet Nuts拉帽Blind Nuts拉钉Blind Rivets实心梢Clevis Pins And Straight Pins弹片Clips卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter PinsE型环E-Rings膨胀螺栓Expansion Anchor Bolts鸡眼钉Eyelets RivetsR型销Snap Pins闸、锁Latches And Keeper Assembleds其它特殊铆钉Other Specil Rivets销Pins格式管夹、管束Pipe Hanger铆钉Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings中空钉Semi-Tubular Rivet开叉钉Split Drive Anchors弹簧华司Spring Washers弹簧蝴蝶夹Spring Wings不锈钢华司Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉Thread Nails钛合金铆钉Titaium Alloy Rivets管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件Fasteners合金钢工具Alloy Steel Tools螺栓模Bolt Heading Dies手动拉钉钳Hand Riveter船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl)装饰链Decorative Chains自攻螺纹衬套Ensat Threaded Inserts六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings 汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet Metal Fasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子T-Yoke轮胎链Tire Chains狗链Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle 针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-Low Thread Screws不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
黑氧化 达克罗 热浸锌来自通用缩写 （Universal Abbrev）
Socket Head Cap Screw Passivation
Hexagonal Socket With locking Element
Stainless Steel
Scr Cap Skt HD PSVT/PS Hex Skt
Phillips Screw
PHIL SCR
十字槽头螺钉
Socket Set Screw Full Hexagonal Nut Hexagonal Jam Nut Socket Head Cap Screw
S.S.S NUT HEX FULL NUT HEX JAM
S.H.C.S
止付螺丝 六角全高螺母
Pan wash HD
垫圈盘头
Socket Hd
Skt HD
六角圆柱头
Hexagon cap Head
Hex Cap HD
外六角头
Square shouder Head
SQ SDR HD
方肩头
Cheese Head
Ches HD
圆锥头
Wing Head
Wing HD
带翼头
穴型状(Driver style)
Philips cross recessed
Phil
十字
Pozidriv cross recessed Torx
6-lobular Socket
Pozi Torx 6-lobu Skt
米字 内梅花 内六角
Slot
Slt
一字槽
螺丝(Screw) 示意图
表面处理(Coating)
Znic blue Zinc black Zinc yellow(Zinc Oliver) Zinc white/Zinc Clear Black Anodize Natural Anodize Gold Anodize Copper Red Copper Yellow Nickel Over Copper Tin Matt Flash Black Painting Coating Sn/Pb Plating Sandblast and Anodize Nickel Flash Nickel Electroless Chrome Flash Tin Flash Gold Plating Titanium Plating Cadmium Plating Zinc-Iron Alloy Chromate Electro Painting Silver Plating Nickel Plating Black Oxide Dacromet Heat dip zinc
定)
头部形状(Head style)
紧固件专用词中英文对照
英文
Pan Head
Flat Head 或
countersunk Head
Round Head
英文简写 Pan HD Flat HD CS HD RD HD
中文 盘头 平头 沉头 圆头
Oval Head
OL HD
半沉头
Pan washer Head
ZB ZBK ZY (ZO)/ZC ZW/ZI BL NA GD RU YU CN DT PC TP SA NI EN CR ET AU
TI CD ZF CH EF Sil Plat/SLVR-PLT/AG Nic Plat BO Dacr HDZinc
兰锌 黑锌
黄锌/五彩锌 白锌
氧化黑色 氧化黑色 氧化金色 镀红铜 镀黄铜 镀铜底镍 镀哑锡 镀哑锡 镀锡铅合金 喷沙阳极 镀亮镍 无电解镍 镀亮铬 镀亮锡
W/LKG LMNT SST
圆柱头内六角螺钉 钝化
内六角 自锁/耐落
不锈钢
大致形状(Rough Style)
Split Lock Washer
WSHR LKG SPLIT
锁紧垫圈
Wave Washer
WSHR WAVE
波形垫圈
Flat Washer
WSHR FLAT
平垫圈
Pan Head Machine Screw SCR MACH PAN HD 盘头机器螺钉
锁紧螺母 内六角圆柱头螺钉
Hex Head Cap Screw
H.H.C.S
外六角螺栓
NUT KEPS
KEPS NUT
Hexagon Head Bolt
BOLT HEX HD
注：以上信息由CNB采购导航整理。/
K型螺母
六角标准螺栓(全螺 纹半螺纹视情况而