Cisco-MDS-9124光纤交换机安装配置手册
相关主题
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Continue with Out-of-band (mgmt0) management configuration? (yes/no) [y]:y
Mgmt0 IP address :192.168.1.46(Use the IP address of your switch from Table1 inAppendix B of the lab reference guide called “Accessing the Remote Lab”. You can also derive the IP address of your switch by replacing X with your pod number, and Y with 3 [if you are working on a MDS 9216) or 5 (if you are working on the MDS 9506].)
SNMPv3 user authentication password :admin123
The same password will be used for SNMPv3 privacy as well.
Configure read-only SNMP community string (yes/no) [n]:<Enter>
端口介绍：
第2章
MDS9124光纤交换机加电需要进行初始化设置，本身的Management Port没有默认的ＩＰ，需要初始化的时候设置，用串口线连接Console Port，具体的设置过程如下：
--- Basic System Configuration Dialog ---
This setup utility will guide you through the basic configuration of the system. Setup configures only enough connectivity for management of the system.
Press Enter in case you want to skip any dialog. Use ctrl-c at anytime to skip away remaining dialogs.
Would you like to enter the basic configuration dialog (yes/no):y
Configure the DNS IP address? (yes/no) [n]:<Enter>
Configure the default domain name? (yes/no) [n]:<Enter>
Enable the telnet service? (yes/no)Fra Baidu bibliotek[y]:<Enter>
Enable the ssh service? (yes/no) [n]:<Enter>
Configure the ntp server? (yes/no) [n]:<Enter>
Configure default switchport interface state (shut/noshut) [shut]:<Enter>
Enter the password for "admin" :admin
Create another login account (yes/no) [n]:n
Configure SNMPv3 Management parameters (yes/no) [y]:y
SNMPv3 user name [admin]:admin
CISCO MDS9124光纤交换机安装配置手册
版本v1.0
二零零九年七月
神州数码(中国)技术中心
文档控制
更改记录
版本
创建/修改时间
编制/修改者
文件/修改内容
审批人
v1.0
2009-7-6
钟本营
文件创建
审阅
姓名
职位
发布
姓名
职位
第1章
Cisco® MDS 9124 24端口多层光纤阵列交换机拥有24个端口，支持4、2和1 Gbps速率，在紧凑的1机架单元(1RU)机型中，以廉宜价格提供了灵活性、高可用性、安全性和易用性，实现了出色的价值。Cisco MDS 9124能以8端口的增量，灵活地从8端口扩展到24端口，可满足部门存储局域网(SAN)交换机和企业SAN中边缘交换机的密度需求。Cisco MDS 9124支持快速配置和任务向导，能够快速、简便地部署在任何规模的网络中。它采用了Cisco MDS 9000 SAN-OS软件，包括先进的存储网络特性和功能，与Cisco MDS 9500系列多层导向器和Cisco MDS 9200系列多层光纤阵列交换机兼容，在核心-边缘部署中提供了透明的端到端服务交付能力。
Configure read-write SNMP community string (yes/no) [n]:<Enter>
Enter the switch name:mds9124-1(where NNN is your switch model and X is your pod number; for example, mds9506-1)
Configure static route? (yes/no) [y]:n
Configure the default network? (yes/no) [y]:n
Configure the default gateway? (yes/no) [y]:<Enter>
IP address of the default gateway :192.168.1.1(whereXis your pod number)
Mgmt0 IP netmask :255.255.255.0
Continue with In-band (vsan1) management configuration? (yes/no) [n]:<Enter>
Enable the ip routing capabilities? (yes/no) [y]:y
Mgmt0 IP address :192.168.1.46(Use the IP address of your switch from Table1 inAppendix B of the lab reference guide called “Accessing the Remote Lab”. You can also derive the IP address of your switch by replacing X with your pod number, and Y with 3 [if you are working on a MDS 9216) or 5 (if you are working on the MDS 9506].)
SNMPv3 user authentication password :admin123
The same password will be used for SNMPv3 privacy as well.
Configure read-only SNMP community string (yes/no) [n]:<Enter>
端口介绍：
第2章
MDS9124光纤交换机加电需要进行初始化设置，本身的Management Port没有默认的ＩＰ，需要初始化的时候设置，用串口线连接Console Port，具体的设置过程如下：
--- Basic System Configuration Dialog ---
This setup utility will guide you through the basic configuration of the system. Setup configures only enough connectivity for management of the system.
Press Enter in case you want to skip any dialog. Use ctrl-c at anytime to skip away remaining dialogs.
Would you like to enter the basic configuration dialog (yes/no):y
Configure the DNS IP address? (yes/no) [n]:<Enter>
Configure the default domain name? (yes/no) [n]:<Enter>
Enable the telnet service? (yes/no)Fra Baidu bibliotek[y]:<Enter>
Enable the ssh service? (yes/no) [n]:<Enter>
Configure the ntp server? (yes/no) [n]:<Enter>
Configure default switchport interface state (shut/noshut) [shut]:<Enter>
Enter the password for "admin" :admin
Create another login account (yes/no) [n]:n
Configure SNMPv3 Management parameters (yes/no) [y]:y
SNMPv3 user name [admin]:admin
CISCO MDS9124光纤交换机安装配置手册
版本v1.0
二零零九年七月
神州数码(中国)技术中心
文档控制
更改记录
版本
创建/修改时间
编制/修改者
文件/修改内容
审批人
v1.0
2009-7-6
钟本营
文件创建
审阅
姓名
职位
发布
姓名
职位
第1章
Cisco® MDS 9124 24端口多层光纤阵列交换机拥有24个端口，支持4、2和1 Gbps速率，在紧凑的1机架单元(1RU)机型中，以廉宜价格提供了灵活性、高可用性、安全性和易用性，实现了出色的价值。Cisco MDS 9124能以8端口的增量，灵活地从8端口扩展到24端口，可满足部门存储局域网(SAN)交换机和企业SAN中边缘交换机的密度需求。Cisco MDS 9124支持快速配置和任务向导，能够快速、简便地部署在任何规模的网络中。它采用了Cisco MDS 9000 SAN-OS软件，包括先进的存储网络特性和功能，与Cisco MDS 9500系列多层导向器和Cisco MDS 9200系列多层光纤阵列交换机兼容，在核心-边缘部署中提供了透明的端到端服务交付能力。
Configure read-write SNMP community string (yes/no) [n]:<Enter>
Enter the switch name:mds9124-1(where NNN is your switch model and X is your pod number; for example, mds9506-1)
Configure static route? (yes/no) [y]:n
Configure the default network? (yes/no) [y]:n
Configure the default gateway? (yes/no) [y]:<Enter>
IP address of the default gateway :192.168.1.1(whereXis your pod number)
Mgmt0 IP netmask :255.255.255.0
Continue with In-band (vsan1) management configuration? (yes/no) [n]:<Enter>
Enable the ip routing capabilities? (yes/no) [y]:y