最新质量英语词汇大全(中英对照)
2020年(质量管理知识)质量英语词汇大全(中英对照)
(质量管理知识)质量英语词汇大全(中英對照)品质名词(中英对照)AABC analysis ABC 分析Abnormality 不正常性Abscissa 横坐标Absolute deviation 绝对离差Absolute dispersion 绝对离势Absolute error 绝对误差Absolute frequency 绝对次数Absolute number 绝对数Absolute reliability 绝对可靠度Absolute term 绝对项Absolute value 绝对值Absolute variation 绝对变异Abstract number 抽象数Abstract unit 抽象单位Accelerated factor 加速系数,加速因子Accelerated life test 加速寿命试验Accelerated test 加速试验Acceleration 加速度Acceptable limit 允收界限Acceptable process 允收制程水平Acceptable quality 允收品质Acceptable quality level (AQL) 允收质量水平Acceptable reliability level (ARL) 允收可靠度水平Acceptability 允收性Acceptability criterion 允收标准Acceptance 允收,验收Acceptance, probability of 允收机率Acceptance, region of 允收区域Acceptance and rejection criteria 允收与拒收准则Acceptance boundary 允收界限Acceptance coefficient 允收系数Acceptance control chart 验收管制图Acceptance cost 验收费用Acceptance criteria 允收准则Acceptance error 允收误差Acceptance inspection 验收检验Acceptance limit 允收界限Acceptance line 允收线Acceptance number 允收(不良品)数Acceptance plan 验收计划Acceptance procedure 验收程序Acceptance/rectification scheme 允收/精选方案Acceptance sampling, attribute 计数值验收抽样Acceptance sampling, variable 计量值验收抽样Acceptance sampling plan 验收抽样计划Acceptance sampling scheme 验收抽样方案Acceptance test 验收试验Acceptance value 允收值Acceptance zone 允收区域Acceptance product 允收品Accepting lot 允收批Access time 接近时间,故障诊断时间Accessibility 可接近性Accident rate 意外率Accidental error 偶误,偶然误差Accidental fluctuation 偶然波动Accidental movement 意外移动Accounting test 验算(决算)试验Accumulated operating time 累积操作时间Accuracy 准确度Accuracy of data 数据准确度Accuracy of estimation 估计准确度Accuracy of the mean 平均数准确度Achieved availability 实际可用度Action 行动,措施Action, corrective 矫正行动(措施)Action control chart 行动管制图Action limit 行动界限Active line 行动线Active maintenance time 实际维护时间Active parallel redundancy 主动并复联(置)Active preventive maintenance 现行预防维护时间Active redundancy 主动复联(置)Active repair time 实际修复时间Active standby 主动备用Active time 运用时间Actual frequency 实际次数Actual limit 实际界限Actual range 实际全距Actual value 实际值Adaptability 可适应性Adaptive control 修改管制Addition theorem 加法定理Additivity 加法性,可加性Adjusted average 修正平均数Adjusted value 修正值Adjustment factor 调整系数Administration time for a repair 修复之管理时间Administrative time 管理时间Adopted value 采用值Advisory Group on Reliability of Electronic Equipment (AGREE)电子装备可靠度顾问团Aeronautical Radio, Incorporated (ARINC) 航空无线电公司After-sales service 售后服务Age 年限Age at death 死亡年限Age at failure 失效年限Age-based maintenance 年限基准维护Aggregative method 综合法Aging 老化Agreement of quality assurance 质量保证之协议Agreement on verification method 验(查)证方法之协议Alarm signals 警告(报)讯号Alert time 待命时间Algebraic sum 代数和Algorism (Algorithm) 阿拉伯数字计数法Alias 假名Alienation 余相关Alignment chart 列线图Allocation 配当Allocation of reliability 可靠度配当Allowable percent defective (Acceptable quality level, AQL) 允收不良率(允收质量水平)Allowance 允差,裕度Alternative hypothesis 对立假设American Management Association (AMA) 美国管理协会American National Standards Institute (ANSI) 美国标准协会American Society for Quality Control (ASQC) 美国质量管理学会American Society for Mechanical Engineers (ASME) 美国机械工程师学会American Society for Testing and Materials (ASTM) 美国材料试验学会American Standard Association (ASA) 美国标准协会American Statistical Association (ASA) 美国统计协会American War Standards (AWS) 美国战时标准Ambient condition 周遭条件Analysis, sequential 逐次分析Analysis by accumulated frequency 累积法,累积次数分析Analysis by non-accumulated frequency 次数法,非累积次数分析Analysis of correlation 相关分析Analysis of covariance 共变异数分析Analysis of means (AVON) 平均数分析Analysis of problem 问题之分析Analysis of variance (ANOVA) 变异数分析Analysis sample 分析样本Analytical error 分析误差Angular transformation 角度转(变)换Anti-logarithm 逆对数Anti-mode 逆众数AOQL Sampling Table 平均出厂质量界限抽样数Applicability 应用性Applied statistics 应用统计学Apportionment of reliability 可靠度配当Apportionment techniques 配当技术Appraisal cost 鉴定成本,评估成本Appraisal system 评估制度Appraisal of quality 质量评估Approach to sequential testing 逐次试验法Approval of processes and equipment 核准制程与设备Approximate mode 近似众数Approximate number 近似数值Approximation 近似法,概算AQL (Acceptable quality level) 允收(质量)水平Arbitrary average (Assumed average,Arbitrary mean) 假定平均数Arbitrary origin 假定原点Arbitrary scale 假定标度Area bar chart 面积条图Area chart (diagram, graph) 面积图Area sampling 地区抽样Arithmetic average 算术平均数Arithmetic cross 算术交叉Arithmetic graph 算术图Arithmetic line chart 算术线图Arithmetic mean 算术平均数Arithmetic paper 算术纸Arithmetic probability paper 算术机率纸Arithmetic progression (Arithmetic series) 算术级数,等差级数Arithmetic scale 算术标度,等差标度Arithmetic series 算术级数,等差级数Army Ordnance Table 陆军兵工署(抽样)表Army Service Forces Table 陆军(抽样)表序列Array 序列Array distribution 序列分配(布)Array of data 数据序列Assemble 装配(组立)Assembled product 装配品Assembly 装配件Assembly inspection 装配检验Assembly quality analysis report 装配质量分析报告Assessed failure rate 评估失效率Assessed mean active -maintenance time 评估时间现行维护时间Assessed mean life 评估平均寿命Assessed mean time between failures 评估平均失效间格时间Assessed mean time to failure 评估平均失效前时间Assessed reliability 评估可靠度Assessed value 评估值Assessment of subcontractor 分包商之评鉴Assignable cause (Special cause) 非机遇原因(特殊原因)Assignable variation 非机遇变异Associated dependent variable 相联因变数Associated variate 相联变量Association coefficient 相联系数Association of attribute 品性相联Association table 相联表,联合表Assumed mean (Assumed average,Arbitrary average) 假定平均数Assumed median 假定中位数Assumed origin 假定原点Assurance quality 保证质量Assurance function 保证功能Asymmetrical distribution 不对称分配(布)Asymmetry 不对称Asymptotic distribution 趋近分配(布)At random 随机Attribute 计数值,属性Attribute classification 品性分类Attribute data 计数数据Attribute inspection 计数值检验Attribute sampling 计数值抽样Attribute sampling plan 计数值抽样计划Attribute testing (Go no-go testing) 计数值试验(通过与不通过试验)Attribute value 计数值Audit 稽核Audit for reliability 可靠度稽核Audit of decision 稽核决策Audit plan 稽核计划Audit report 稽核报告Auditing report 稽核报告Auto-correlation 自动相关Automatic switch-over redundancy 自动切换复联(置)Automatic test equipment (Am) 自动试验装备Auto-regression 自动回归Availability 可用性,可用度Average (Mean) 平均数,平均值Average, grand 总平均Average, moving 移动平均数Average, sample 样本平均数Average, standard error of 标准误平均数Average, universe 群体平均数Average, weighted 加权平均数Average amount of inspection 平均检验数Average and range chart 平均数及全距(管制)图Average availability 平均可用度Average deviation (A.D.) (Mean deviation) 平均差Average error (Mean error) 平均误差Average number of defects 平均缺点数Average of ratios 比例平均数Average outgoing quality (AOQ) 平均出厂质量Average outgoing quality curve 平均出厂质量曲线Average outgoing quality level 平均出厂质量水平Average outgoing quality limit (AOQL) 平均出厂水平Average quality level 平均出厂质量界限Average quality level line 质量平均线Average quality protection 平均质量保护Average range 平均全距Average run length (ARL) 平均连串长度Average sample number (ASN)平均样品数Average range 平均全距Average run length (ARL) 平均连串长度Average sample number(ASN) 平均样本数Average sample number curve 平均样本曲线Average sample size (ASS) 平均样本大小Average sample size curve 平均样本大小曲线Average sample 平均抽样Average total inspection (ATI) 平均总检验(件)数Average total inspection curve 平均总检验数曲线Average value 平均值Avoidable cause 可避免之原因Avoidable quality cost 可避免之质量成本Axiom 公理Axis 轴Axis of abscissa 横轴Axis of ordinate 纵轴BBad lot 坏批Balance frequency 平衡次数Balanced complete type 平衡完备型Balanced design 平衡设计Balanced experiment 平衡实验Balanced incomplete type 平衡不完备型Balanced sample 平衡样本Band chart 带形图Band curve chart 带形曲线图Bank of reliability data 可靠度数据库Bar chart (diagram) 条(形)图Bartlett's test 巴特莱特试验Base line 基线Base number 基数Base period 基期Base point 基点Basic reliability 基本可靠度Batch (Lot) 批Batch of material 材料批Batch process 分批制造方法Batch size 批量Batch testing 批试验Bathtub curve 浴缸曲线Bathtub failure curve 浴缸失效曲线Bayes' estimator 贝式估计式Bayes' theorem 贝式定理Bayesian approach 贝式法Bayesian approcah to design 贝式设计法Bayesian estimation 贝式估计Bead map 标珠图Bell-shaped curve 钟形曲线Bell-shaped distribution 钟形分配(布)Bell-shaped failure pattern 钟形失效型态JBell System 贝尔系统Bell Telephone Laboratories 贝尔电话实验室Bell Telephone Laboratories Sampling Table 贝尔(电话实验室)抽样表Benign failure 无危险的失效Bernoulli distribution 白努利分配(布)Best fit 最适配合Best fitting line 最适线Best fitting curve 最适曲线Best linear invariant estimator 最佳线型不变估计式Best linear unbiased estimator 最佳线型不偏估计式Beta coefficient β系数Beta distribution β分配(布)Beta function β函数Between-class variance 组间变异数Between-column variance 组间变异Between-column variation 行间变异Between-row variation 列间变异Between sample variation 样本间变异Bias 偏差Bias, downward 向下偏差Bias, downward type 向下型偏差Bias, upward 向上偏差Bias, upward type 向上型偏差Biased error 偏误Biased estimate 偏差估计Biased sample 偏差样本Biased test 偏差试验Bilateral 双边Bill of material (BOM) 物料清单Bimodal 双峰Bimodal curve 双峰曲线Bimodal distribution 双峰分配(布)Bimodal redundancy 双峰型复联(置)Bimodality 双峰性Binary system 二元制Binomial, skewed 偏态二项Binomial coefficient 二项系数Binomial curve 二项曲线Binomial distribution 二项分配(布)Binomial equation 二项方程式Binomial expansion 二项展开式Binomial population 二项群体Binomial probability distribution 二项机率分配(布)Binomial probability paper(BIPP) 二项机率纸Binomial series 二项级数Binomial theorem 二项定理Bi-serial 双数列Biserial correlation 双数列相关Biserial coefficient of correlation 双数列相关系数Biserial ratio of correlation 双数列相关比Bivariate 双变量Bivariate distribution 双变量分配(布)Bivariate frequency distribution 双变量次数分配(布)Bivariate normal distribution 双变量常态分配(布)Blend 混,混合Block 量块,(实验)区,方块Block design 实验区设计Block diagram 方块图Block factor 地区因素Block in series 串联方块Boundary 界Boundary, cell 组界Bowker-Goode variables plan Bowker-Goode 记量值(抽样)计划Bowl drawing 碗珠抽样Bowl experiment 碗珠实验Bowl test 碗珠试验Bowley's coefficient of skewness Bowley偏态系数Bowley's formula Bowley公式Bureau of Ordnance, U.S. Navy 美国海军兵工署Break-even chart 损益平衡图Break-even point (BEP) 损益平衡点Breakthrough 突破British Standards Institution 英国标准协会Broken curve 中断曲线Broken series 中断数列Broken trend 中断趋势Built-in test (BIT) 内含测试,自测Bureau of Commodity Inspection and Quarantine (BCIQ) 商品检验局Bulk sampling Burn-in 大宗抽样Business Process Management (BPM) 业务流程管理Buyer 买方,客户CC chart C(管制)图Calculated value (Computed value) 计算值Calculation chart 计算图Calendar time 日历时间Calibration 校正Calibration record 校正记录Camp-Meidell inequality Camp-Meidell不等式Capability 能力Capability, machine 机器能力Capability, process 制程能力Capability ratio 能力比Capacity 能量,容量Caption 纵标目Carrying out the audit 实施稽核Cartogram 统计图Case method 个案法Catastrophic failure 突然故障,崩坏失效,致命失效Category 类别Cauchy distribution Cauchy 分配(布)Causality 因果律Cause 原因Cause, assignable 非机遇原因Cause, avoidable 可避免原因Cause, chance 机遇原因Cause, common 共同原因Cause, findable 可寻找原因Cause, random 随机原因Cause, special 特殊原因Cause, substantial 本质原因Cause, unavoidable 不可避免原因Cause and effect 因果Cause and effect diagram 特性要因图Cell 组Cell boundary 组界Cell deviation (d) 组离差Cell frequency (f) 组次数Cell interval (i,h) 组距Cell limit 组限Cell method 分组法Cell mid-point (Xm) 组中点Cell value 组值Censored sample 检剔样本Censored test 检剔试验Censorship 检剔Census 普查Center line 中线Central inspection station 中央检验站Central limit theory 趋中理论,中央极限理论Central limit theorem 趋中理论,中央极限理论Central line (CL.) 中心线Central moment 中心动差Central ordinate 中纵坐标Central tendency 集中趋势Central value 中值,中心值Certainty 确定性Certified chart 验证图Certified equipment 合格设备Certified quality engineer (CQE) 合格质量工程师Certified quality technician (CQT) 合格质量技术师Certified reliability engineer (CRE) 合格可靠度工程师Certification 验证Chain model 炼结模型Chain reliability 炼结可靠度Chain sampling plan (CHSP) 炼结抽样计划Chance 机遇Chance cause 机遇原因Chance error (Probable error) 机遇误差,机误Chance factor 机遇因素Chance failure 机遇故障,机遇失效Chance failure period 机遇失效期Chance fluctuation 机遇波动Chance variable 机遇变数Chance variation 机遇变异Change control 改变(变更)管理Chaotic variation 混乱变异Characteristic (质量)特性Characteristic, qualitative 质的特性Characteristic, quantitative 量的特性Characteristic curve, operating (OC curve) 操作特性曲线,OC曲线Characteristic diagram 特性要因图Characteristic function 特性函数Characteristic life 特性寿命Characteristic operating curve (OC curve) 特性操作曲线(OC曲线)Characteristic value 特性值Chargeable failure 可计列失效,故障Charlier check Charlier 覆检法Chart 图,(管制)图Chart, acceptance control 验收管制图Chart, average and range 平均数及全距(管制)图Chart, average number of defects 平均缺点数(管制)图Chart, control 管制图Chart, cumulative sum 累积和(管制)图Chart, defects per unit 每单位内缺点数(管制)图Chart, fraction defective 不良率(管制)图Chart, group 多项(管制)图Chart, individual 个别值(管制)图Chart, median 中位数(管制)图Chart, moving and range 移动平均数及全距(管制)图Chart, moving range 移动全距(管制)图Chart, modified control limits 修正管制界限(管制)图Chart, multi-variation 变异值(管制)图Chart, multiple 复式(管制)图Chart, number defectives 不良(品)数(管制)图Chart, number of defects 缺点数(管制)图Chart, percent defective 不良率管制图Chart, range 全距(管制)图Chart, run 操作(记录)图Chart, shop 工厂(管制)图Chart, Shewhart control Shewhart 管制图Chart, two-way control 双向管制图Chebyshev's inequality Chebyshev 不等式Check inspection 复核检验Check sampling 复核检验员Check inspector 复核抽样Chi-square ,卡方Chi-square distribution 分配(布),卡方分配(布)Chi-square test 检定,卡方检定Chi-squared distribution 分配(布),卡方分配(布)Chip 小圆片Chronic defect 慢性缺点Chronological chart 时序图Chronological series 时序数列Class 组Class boundaries (True class limits)组界(真实组限)Class form 组形Class frequency (f) 组次数Class interval (i,h) 组距Class limit 组限Class mark 组标,中值Class mean 组平均数Class mid-point(Xm) 组中点Class mid-value 组中值Class of median 组中位数Class value 组值Classes, number of 组数Classification chart 分组,分类Classification frequency 分组次数Classification frequency series 分组次数数列Classification of defectives 不良品分类Classification of defects 缺点分类Classfication of failure 失效分类,故障分类Classification process 分组(方)法Clearance 间隙,余隙Cluster 集团Cluster sampling 集团抽样Cochran's test Cochran 检定Code 简化,代号Code letter 代字Coded unit 简化单位Coded value 简化值Coding 简化Coding rule 简化规则Coefficient 系数Coefficient, correlation 相关系数Coefficient of alienation 余相关系数Coefficient of association 相关系数Coefficient of binomial distribution 二项分配(布)系数Coefficient of colligation 束联系数Coefficient of contingency 列联系数Coefficient of correlation 相关系数Coefficient of determination (r2) 定限系数Coefficient of dispersion 离势系数Coefficient of kurtosis 峰度系数Coefficient of multiple correlation 复相关系数Coefficient of net correlation 净相关系数Coefficient of net regression 净回归系数Coefficient of non-determination 不定限系数Coefficient of part correlation 部份相关系数Coefficient of partial correlation 部份相关系数Coefficient of rank correlation 等级相关系数Coefficient of reliability 可靠度系数Coefficient of regression 回归系数Coefficient of skewness 偏态系数,偏斜系数Coefficient of variation (CV) 变异系数Cold standby 冷置系数Collective quality 集体品质Columbia sampling table Columbia 抽样计划Column (Column/Row) 行,纵行(行/列)Column head 标目Column diagram 直行图Combination 组合Combinational model 复合模型Combined environmental reliability test (CERT) 复合环境可靠度试验Combined failure 复合失效,复合故障Combined stress life test 复合应力寿命试验Commissioning 委制Commodity 商品Common cause (Chance cause) 共同原因(机遇原因)Company standard 公司标准Companys need 公司需要Company-wide quality control (CWQC) 全公司质量管理Comparability 可比性Comparable measure 可比量数Compensating error 补偿误差Compensating fluctuation 补偿波动Competing product 竞争产品Complete association 全相联Complete block design 完全区集法Complete confounding 完全交络Complete dissociation 全不相联Complete failure 完全故障,完全失效Completely randomized design 完全随机法Complaint 抱怨Complaint index 抱怨指标Completed product verification 成品验证Component 组件,组件Component bar chart 成份条图Component distiibution 组成份分配(布)Component part diagram 成份图Component ratio 成份比Component reliability 组件可靠度Component variance 成份变异数Components of variance 变异数成份Composite curve 复合曲线Composite design 复合法Composite hypothesis 复合假设,组合假设Composite unit 复合单位Compound distribution 复合分配(布)Compound event 复合事件Compound probability 复合机率Compounding technique 复合法Compressed limit 压缩界限Compressed limit gauging 压缩界限规则Computed value 计算值Concentric circle diagram 同心圆图Conception of limit 极限概念Conceptual design 概念设计Conceptual design review 概念设计审查Concession 特采,特认Concomitant factor 共变因素Concomitant variable 共变数Concomitant variation 共变异Concurrency 并行Condition maintenance 状态维护Condition monitoring 状态监督Condition-based maintenance 状态基准维护Conditional probability 条件机率Conditions of use 使用条件Confidence 信任,信赖Confidence coefficient 信任系数,信赖系数Confidence interval 信任区间,信赖区间Confidence in test results 试验结果的信赖度Confidence level 信任水平,信赖水平Confidence limit 信任界限,信赖界限Confidence range 信任全距,信赖全距Configuration control 型态管制Configuration items 型态件Configuration management 型态管理Confirmation 确认Conformance to the requirement 符合要求Conformation 一致Conforming article 合格品Conformity 符合Confounding 交络Confounding, complete 完全交络Confounding, partial 部份交络Connector 连接器Consignment 委托,寄售Consistency 一致性Constancy 恒久性Constancy of great numbers 大数恒久性Constant 常数Constant cause system 恒常原因系统Constant error 恒常误差Constant failure period 恒常失效期Constant failure rate dustribution 恒常失效率分配(布)Constant weight (Fixed weight) 固定权数Constraint 束缚Consultant 管理顾问师Consumer 消费者Consumer acceptance specification 消费者允收规格Consumerism 消费者主义Consumer's risk (CR) 消费者冒险率Consumer test panel 消费者试验小组Consumer preference 消费者偏好Consumer sensitivity test 消费者感官试验Contingency 列联Contingency coefficient 列联系数Contingency table 列联表Contingency theorem 列联理论Continuity correction 连续校正Continuous change 连续变更Continuous data 连续数据Continuous distribution 连续分配(布)Continuous production 连续生产Continuous sampling 连续抽样Continuous sampling plan (CSP) 连续抽样计划Continuous series 连续数列Continuous variable 连续变量Contract 合约Contract preparation 拟定合约Contract review 合约检讨Contract requirements 合约需求Contract requirements analysis 合约需求分析Contractors 合约商Contrast analysis 对照分析Control, in 在管制(状态)下Control, lack of 缺乏管制Control, out of 超出管制Control, state of 管制状态Control, under 在管制(状态)下Control chart 管制图Control chart, cumulative sum 累积和管制图Control chart, defects per unit 每单位内缺点数管制图Control chart, two-way 双向管制图Control chart factor 管制图系数Control chart for attribute 计数值管制图Control chart for variable (measurement) 计量值管制图Control chart method 管制图法Control chart pattern 管制图类型Control factor 管制因素Control gaging (gauging) 管制规测Control level 管制水平Control limit 管制界限Control limit, lower 管制下限Control limit, modified 修正管制界限Control limit, upper 管制上限Control limit factor 管制界限因子Control line 管制线Control of measuring and test equipment 量测与试验设备之管制Control of nonconforming material 不合格物料之管制Control of nonconforming product 不合格产品之管制Control of production 生产管制Control of reliability 可靠度管制Control of verification status 验证状况之管制Control plan 管制计划Control point 管制点Control station 管制站Control system 管制系统Controllability 可管制性Controlled process 管制制程Controlled state 管制状态Controlled variability 管制变异性Controlled variable 管制变数Controlling item 管制项目Convenience lot 合宜的批Convergence 收敛Cooked distribution 中断分配(布)Coordinate 坐标Coordinate axis 坐标轴Coordinate line 坐标线Coordination 协调Coordination for reliability 可靠度协调Correction 校正,修正Correction, Sheppard Sheppard 校正数Correction factor 修正因子Correction for continuity 连续校正Correction for mean 平均数校正Correction term 校正项Corrective action 矫正行动,改正措施Corrective maintenance 矫正维护,改正维护Corrective maintenance time 矫正维护时间,改正维护时间Corrective sorting 修正选别Correlated measure 相关量数Correlated samples 相关样本Correlation 相关Correlation, coefficient of 相关系数Correlation, direct 直接相关Correlation, index of 相关指数Correlation, inverse 反相关Correlation, multiple 复相关Correlation, negative 负相关Correlation, net 净相关Correlation, nonlinear 非线性相关Correlation, nonsense 无意义相关Correlation, part 部份相关,偏相关Correlation, partial 部份相关,偏相关Correlation, perfect 完全相关Correlation, rank 等级相关Correlation, serial 数序相关Correlation, simple 简相关Correlation, zero 零相关Correlation analysis 相关分析Correlation chart 相关图Correlation, coefficient 相关系数Correlation coefficient, rank 等级相关系数Correlation matrix 相关矩阵Correlation of attributes 品性相关Correlation ratio 相关比Correlation of x on y x与y的相关比Correlation ratio of y on x y与x的相关比Correlation scatter chart 相关散布图Correlation surface 相关面Correlation table 相关表Correlation theory 相关理论Correlogram 相关图Corrosive atmosphere 腐蚀性空气Cost 成本,费用Cost, acquisition 取得成本Cost, appraisal 评估(鉴定)成本Cost, external failure 外部失败成本Cost, internal failure 内部失败成本Cost, life cycle 寿命周期成本Cost, logistic 后续成本Cost, prevention 预防成本Cost, quality 质量成本Cost, quality control 质量管理成本Cost, rework 重加工成本Cost effectiveness 成本效益Cost function 成本机能Cost model for reliability optimization 可靠度最佳化成本模式Cost reduction 成本减低Count (Countable) data 点计数据Counter variation 反行变异Co-variation 共变异Covariance 共变异数,共变数Covariance analysis 共变异数分析Covariance matrix 共变异矩阵Craps, game of 掷骰游戏Credibility 信用Creep failure 潜变失效,潜变故障Crest 峰Criteria for workmanship 工作技艺准则Criterion 准则,规范Criterion, acceptance 验收准则(规范)Critical component control 重要组件管制Critical defect 严重缺点Critical defective 严重不良品Critical design review 关键设计审查Critical failure 关键故障,严重失效Critical items 关键品目,重要件Critical path 要径Critical path analysis 要径分析法Critical region 临界区域,弃却区域,判定区Critical value 临界值,判定值Criticality 严重性,关键性Cross 交叉Cross check 互校Cross classification 交叉分类Cross correlation 交叉相关Cross formula 交互公式Cross-hatch 交叉线Cross-hatched map 交叉图Cross-over design 交叉计划Crossed design 交叉法Crude mode 概括众数Crude moment 概括动差Cubic chart (diagram) 立方图Culled 检选Cumulant 累积数Cumulation, downward 向下累积Cumulation, total 全部累积Cumulation, upward 向上累积Cumulation average chart 累积平均数(管制)图Cumulative curve 累积曲线Cumulative curve chart 累积曲线图Cumulative damage 累积损坏Cumulative distribution (Ogive) 累积分配(布)Cumulative distribution function 累积分配(布)函数Cumulative error 累积误差Cumulative failure frequency 累积故障次数,累积失效次数Cumulative frequency 累积次数Cumulative frequency arrangement 累积次数排列Cumulative frequency curve 累积次数曲线Cumulative frequency 累积次数曲线图Cumulative frequency distribution 累积次数分配(布)Cumulative frequency polygon 累积(次数)多边形Cumulative frequency (probability) function 累积次数(机率)函数Cumulative frequency table 累积次数表Cumulative function 累积函数Cumulative graph 累积图Cumulative hazard function 累积冒险函数Cumulative mean 累积平均数Cumulative normal distribution 累积常态分配Cumulative number of failures 累积失效数,累积故障数Cumulative percentage of failures 累积失效百分率,累积故障百分率Cumulative probability distribution 累积机率分配(布)Cumulative sum 累积和Cumulative sum chart 累积和(管制)图Cumulative sum control chart 累积和管制图Cumulative terms 累积项Curtailed (Truncated) inspection 截略检验Curtailed (Truncated) sample inspection截略样品检验Curtailed sampling 截略抽样Curtailed sampling inspection 截略抽样检验Curtaijed sampling plan 截略抽样计划Curtailment of sampling plan 抽样计划之截略Curve 曲线Curve, frequency 次数曲线Curve, normal 常态曲线Curve chart (diagram) 曲线图Curve fitting 曲线配合Curve of error 误差曲线Curve of means 平均数曲线Curve of probability 机率曲线Curve type criterion 曲线型准则Curve shape 曲线形状Curvilinear correlation 曲线相关Curvilinear regression 曲线回归Curvilinear trend 曲线趋势Curvilinearity 曲线性Customer 客户,顾客Customer complaint 顾客抱怨Customer feedback information 顾客回馈信息Customer incurred cost 顾客引发成本Customer operation cost 顾客作业成本Customer repair cost 顾客修理成本Customer requirement 顾客要求Customer satisfaction 顾客满意度Customer's need 顾客需要Cusum chart 累积和(管制)图Cycles 周期Cycles between failures 失效间隔周期,故障间隔周期Cycle of operation 操作周期Cyclic curve 周期(循环)曲线Cyclic damage 周期性损坏Cyclic load 周期性负荷Cyclical deviation 周期(循环)离差Cyclical fluctuation 周期波动Cyclical trend 周期趋势Cyclical movement 周期移动Cyclical variation 周期变异Cycling failure rate 周期性失效率,周期性故障率DD chart d管制图Data 数据Data analysis 数据分析Data bank 资料室(库)Data exchange program 数据交换计划Data, inspection 检验数据Data item 数据项,文件项目Data processing 数据处理Death rate 死亡率Debug (debugging) 除错Decile 十分位数Decimal fraction 小数Decision function 决策函数Decision line 决定线Decision making 决策Decision variable 决策变数Decreasing failure rate distribution 递减失效率分配(布)Decrement 减量Decrement rate 减率Defect 疵病,缺点Defect, chronic 慢性缺点Defect, critical 严重缺点Defect, incidental 偶发缺点Defect, major 主要缺点Defect, minor 次要缺点Defect, sporadic 突发缺点Defect and failure analysis 缺点与失效分析Defect chart 缺点数(管制)图Defect Free 零缺点Defect prevention 缺点预防Defects, number of 缺点数Defects classification 缺点分类Defects per hundred units (dphu) 百件缺点数Defects per unit chart 每单位(内)缺点数(管制)图Defects per unit plan 每单位(内)缺点数(管制)计划Defective 不良品Defective, fraction 不良率Defective chart 不良品数(管制)图Defective material 不良材料Defective number 不良品数Defective part 不良零件Defective parts, percentage of 不良零件百分率Defective prevention 不良品预防Defective unit 不良品(单位)Defectives, number of 不良(品)数Defectives classification 不良品分类Definition(s) 定义Deflated series 调节数列Deflated value 调节值Deflating index 调节指数Degradation 劣化Degradation failure 劣化故障,劣化失效Degree of accuracy 准确度Degree of approximation 近似度Degree of association 相联度Degree of confidence 信任(赖)度Degree of contribution 贡献度Degree of freedom (DF) 自由度Degree of reliability 可靠度Delivery 交货,出厂Delivery inspection 出厂检验Delivery qulaity 出厂品质Delivery time 运送时间Demerit 减点Demerit chart 减点(数)(管制)图Demerit rating 减点评比Demerits per unit 每单位(内)减点数Demonstration 示范,验证,展现Demonstration test 验证试验,展现试验Density function 密度函数Dependability 可恃性,相依性,依赖性Dependent factor 因变因子Dependent failure 相依失效,相依故障Dependent variable 因变数Derating 降等,额降,减额定Derivation 导出Derived table 导出表Descriptive item 说明项Descriptive statistics 记述统计(学)Design 设计Design baseline 设计准则Design change 设计变更Design considerations 设计考虑Design control 设计管制Design change control 设计变更管制Design control, new 新设计管制Design criterion 设计准则Design disclosure package 设计启导文件Design effect cost 设计效应成本Design freeze 设计冻结Design in 设计进去Design input 设计输入Design matrix 设计矩阵Design output 设计输出Design of experiment 实验计划Design planning 设计规画Design profile 设计轮廓Design proving 设计认可Design qualification 设计之合格性Design release 设计发布Design requalification 设计合格之再认定Design review 设计审查Design specification 设计规格Design validation 设计确认Design verification 设计验证,查证Design verification test 设计验证试验Designation 名称Designed experiment 实验计划Destructive inspection (test) 破坏性检验(试验)Detailed design 细部设计Detailed design review 细部设计审查Detailed inspection (100% inspection) 全数检验(百分之百检验)Detect 侦测Detection of a failure unit 失效单位之检测,故障单位之检测Detection time 检测时间Deterioration 衰变,劣化Determination, coefficient of 定限系数Development 发展Development test 发展试验Deviation 离差。
质量英语词汇大全(完整版)
质量英语词汇大全(完整版) AABC analysis ABC 分析Abnormality 不正常性Abscissa 横坐标Absolute deviation 绝对离差Absolute dispersion 绝对离势Absolute error 绝对误差Absolute frequency 绝对次数Absolute number 绝对数Absolute reliability 绝对可靠度Absolute term 绝对项Absolute value 绝对值Absolute variation 绝对变异Abstract number 抽象数Abstract unit 抽象单位Accelerated factor 加速系数,加速因子Accelerated life test 加速寿命试验Accelerated test 加速试验Acceleration 加速度Acceptable limit 允收界限Acceptable process 允收制程水平Acceptable quality 允收品质Acceptable quality level (AQL) 允收质量水平Acceptable reliability level (ARL) 允收可靠度水平Acceptability 允收性Acceptability criterion 允收标准Acceptance 允收,验收Acceptance, probability of 允收机率Acceptance, region of 允收区域Acceptance and rejection criteria 允收与拒收准那么Acceptance boundary 允收界限Acceptance coefficient 允收系数Acceptance control chart 验收管制图Acceptance cost 验收费用Acceptance criteria 允收准那么Acceptance error 允收误差Acceptance inspection 验收检验Acceptance limit 允收界限Acceptance line 允收线Acceptance number 允收〔不良品〕数Acceptance plan 验收打算Acceptance procedure 验收程序Acceptance/rectification scheme 允收/精选方案Acceptance sampling, attribute 计数值验收抽样Acceptance sampling, variable 计量值验收抽样Acceptance sampling plan 验收抽样打算Acceptance sampling scheme 验收抽样方案Acceptance test 验收试验Acceptance value 允收值Acceptance zone 允收区域Acceptance product 允收品Accepting lot 允收批Access time 接近时刻,故障诊断时刻Accessibility 可接近性Accident rate 意外率Accidental error 偶误,偶然误差Accidental fluctuation 偶然波动Accidental movement 意外移动Accounting test 验算〔决算〕试验Accumulated operating time 累积操作时刻Accuracy 准确度Accuracy of data 数据准确度Accuracy of estimation 估量准确度Accuracy of the mean 平均数准确度Achieved availability 实际可用度Action 行动,措施Action, corrective 矫正行动〔措施〕Action control chart 行动管制图Action limit 行动界限Active line 行动线Active maintenance time 实际爱护时刻Active parallel redundancy 主动并复联〔置〕Active preventive maintenance 现行预防爱护时刻Active redundancy 主动复联〔置〕Active repair time 实际修复时刻Active standby 主动备用Active time 运用时刻Actual frequency 实际次数Actual limit 实际界限Actual range 实际全距Actual value 实际值Adaptability 可适应性Adaptive control 修改管制Addition theorem 加法定理Additivity 加法性,可加性Adjusted average 修正平均数Adjusted value 修正值Adjustment factor 调整系数Administration time for a repair 修复之治理时刻Administrative time 治理时刻Adopted value 采纳值Advisory Group on Reliability of Electronic Equipment (AGREE) 电子装备可靠度顾问团Aeronautical Radio, Incorporated (ARINC) 航空无线电公司After-sales service 售后服务Age 年限Age at death 死亡年限Age at failure 失效年限Age-based maintenance 年限基准爱护Aggregative method 综合法Aging 老化Agreement of quality assurance 质量保证之协议Agreement on verification method 验〔查〕证方法之协议Alarm signals 警告〔报〕讯号Alert time 待命时刻Algebraic sum 代数和Algorism (Algorithm) 阿拉伯数字计数法Alias 假名Alienation 余相关Alignment chart 列线图Allocation 配当Allocation of reliability 可靠度配当Allowable percent defective (Acceptable quality level, AQL) 允收不良率〔允收质量水平〕Allowance 允差,裕度Alternative hypothesis 对立假设American Management Association (AMA) 美国治理协会American National Standards Institute (ANSI) 美国标准协会American Society for Quality Control (ASQC) 美国质量治理学会American Society for Mechanical Engineers (ASME) 美国机械工程师学会American Society for Testing and Materials (ASTM) 美国材料试验学会American Standard Association (ASA) 美国标准协会American Statistical Association (ASA) 美国统计协会American War Standards (AWS) 美国战时标准Ambient condition 周遭条件Analysis, sequential 逐次分析Analysis by accumulated frequency 累积法,累积次数分析Analysis by non-accumulated frequency 次数法,非累积次数分析Analysis of correlation 相关分析Analysis of covariance 共变异数分析Analysis of means (AVON) 平均数分析Analysis of problem 问题之分析Analysis of variance (ANOVA) 变异数分析Analysis sample 分析样本Analytical error 分析误差Angular transformation 角度转〔变〕换Anti-logarithm 逆对数Anti-mode 逆众数AOQL Sampling Table 平均出厂质量界限抽样数Applicability 应用性Applied statistics 应用统计学Apportionment of reliability 可靠度配当Apportionment techniques 配当技术Appraisal cost 鉴定成本,评估成本Appraisal system 评估制度Appraisal of quality 质量评估Approach to sequential testing 逐次试验法Approval of processes and equipment 核准制程与设备Approximate mode 近似众数Approximate number 近似数值Approximation 近似法,概算AQL (Acceptable quality level) 允收〔质量〕水平Arbitrary average (Assumed average,Arbitrary mean) 假定平均数Arbitrary origin 假定原点Arbitrary scale 假定标度Area bar chart 面积条图Area chart (diagram, graph) 面积图Area sampling 地区抽样Arithmetic average 算术平均数Arithmetic cross 算术交叉Arithmetic graph 算术图Arithmetic line chart 算术线图Arithmetic mean 算术平均数Arithmetic paper 算术纸Arithmetic probability paper 算术机率纸Arithmetic progression (Arithmetic series) 算术级数,等差级数Arithmetic scale 算术标度,等差标度Arithmetic series 算术级数,等差级数Army Ordnance Table 陆军兵工署〔抽样〕表Army Service Forces Table 陆军〔抽样〕表序列Array 序列Array distribution 序列分配〔布〕Array of data 数据序列Assemble 装配〔组立〕Assembled product 装配品Assembly 装配件Assembly inspection 装配检验Assembly quality analysis report 装配质量分析报告Assessed failure rate 评估失效率Assessed mean active -maintenance time 评估时刻现行爱护时刻Assessed mean life 评估平均寿命Assessed mean time between failures 评估平均失效间格时刻Assessed mean time to failure 评估平均失效前时刻Assessed reliability 评估可靠度Assessed value 评估值Assessment of subcontractor 分包商之评鉴Assignable cause (Special cause) 非机遇缘故〔专门缘故〕Assignable variation 非机遇变异Associated dependent variable 相联因变数Associated variate 相联变量Association coefficient 相联系数Association of attribute 品性相联Association table 相联表,联合表Assumed mean (Assumed average,Arbitrary average) 假定平均数Assumed median 假定中位数Assumed origin 假定原点Assurance quality 保证质量Assurance function 保证功能Asymmetrical distribution 不对称分配〔布〕Asymmetry 不对称Asymptotic distribution 趋近分配〔布)At random 随机Attribute 计数值,属性Attribute classification 品性分类Attribute data 计数数据Attribute inspection 计数值检验Attribute sampling 计数值抽样Attribute sampling plan 计数值抽样打算Attribute testing (Go no-go testing) 计数值试验〔通过与不通过试验〕Attribute value 计数值Audit 稽核Audit for reliability 可靠度稽核Audit of decision 稽核决策Audit plan 稽核打算Audit report 稽核报告Auditing report 稽核报告Auto-correlation 自动相关Automatic switch-over redundancy 自动切换复联〔置〕Automatic test equipment (Am) 自动试验装备Auto-regression 自动回来Availability 可用性,可用度Average (Mean) 平均数,平均值Average, grand 总平均Average, moving 移动平均数Average, sample 样本平均数Average, standard error of 标准误平均数Average, universe 群体平均数Average, weighted 加权平均数Average amount of inspection 平均检验数Average and range chart 平均数及全距〔管制〕图Average availability 平均可用度Average deviation (A.D.) (Mean deviation) 平均差Average error (Mean error) 平均误差Average number of defects 平均缺点数Average of ratios 比例平均数Average outgoing quality (AOQ) 平均出厂质量Average outgoing quality curve 平均出厂质量曲线Average outgoing quality level 平均出厂质量水平Average outgoing quality limit (AOQL) 平均出厂水平Average quality level 平均出厂质量界限Average quality level line 质量平均线Average quality protection 平均质量爱护Average range 平均全距Average run length (ARL) 平均连串长度Average sample number (ASN) 平均样品数Average range 平均全距Average run length (ARL) 平均连串长度Average sample number(ASN) 平均样本数Average sample number curve 平均样本曲线Average sample size (ASS) 平均样本大小Average sample size curve 平均样本大小曲线Average sample 平均抽样Average total inspection (ATI) 平均总检验〔件〕数Average total inspection curve 平均总检验数曲线Average value 平均值Avoidable cause 可幸免之缘故Avoidable quality cost 可幸免之质量成本Axiom 公理Axis 轴Axis of abscissa 横轴Axis of ordinate 纵轴BBad lot 坏批Balance frequency 平稳次数Balanced complete type 平稳完备型Balanced design 平稳设计Balanced experiment 平稳实验Balanced incomplete type 平稳不完备型Balanced sample 平稳样本Band chart 带形图Band curve chart 带形曲线图Bank of reliability data 可靠度数据库Bar chart (diagram) 条〔形〕图Bartlett's test 巴特莱特试验Base line 基线Base number 基数Base period 基期Base point 基点Basic reliability 差不多可靠度Batch (Lot) 批Batch of material 材料批Batch process 分批制造方法Batch size 批量Batch testing 批试验Bathtub curve 浴缸曲线Bathtub failure curve 浴缸失效曲线Bayes' estimator 贝式估量式Bayes' theorem 贝式定理Bayesian approach 贝式法Bayesian approcah to design 贝式设计法Bayesian estimation 贝式估量Bead map 标珠图Bell-shaped curve 钟形曲线Bell-shaped distribution 钟形分配〔布〕Bell-shaped failure pattern 钟形失效型态Bell System 贝尔系统Bell Telephone Laboratories 贝尔实验室Bell Telephone Laboratories Sampling Table 贝尔〔实验室〕抽样表Benign failure 无危险的失效Bernoulli distribution 白努利分配〔布〕Best fit 最适配合Best fitting line 最适线Best fitting curve 最适曲线Best linear invariant estimator 最正确线型不变估量式Best linear unbiased estimator 最正确线型不偏估量式Beta coefficient β系数Beta distribution β分配〔布〕Beta function β函数Between-class variance 组间变异数Between-column variance 组间变异Between-column variation 行间变异Between-row variation 列间变异Between sample variation 样本间变异Bias 偏差Bias, downward 向下偏差Bias, downward type 向下型偏差Bias, upward 向上偏差Bias, upward type 向上型偏差Biased error 偏误Biased estimate 偏差估量Biased sample 偏差样本Biased test 偏差试验Bilateral 双边Bill of material (BOM) 物料清单Bimodal 双峰Bimodal curve 双峰曲线Bimodal distribution 双峰分配〔布〕Bimodal redundancy 双峰型复联〔置〕Bimodality 双峰性Binary system 二元制Binomial, skewed 偏态二项Binomial coefficient 二项系数Binomial curve 二项曲线Binomial distribution 二项分配〔布〕Binomial equation 二项方程式Binomial expansion 二项展开式Binomial population 二项群体Binomial probability distribution 二项机率分配〔布〕Binomial probability paper(BIPP) 二项机率纸Binomial series 二项级数Binomial theorem 二项定理Bi-serial 双数列Biserial correlation 双数列相关Biserial coefficient of correlation 双数列相关系数Biserial ratio of correlation 双数列相关比Bivariate 双变量Bivariate distribution 双变量分配〔布〕Bivariate frequency distribution 双变量次数分配〔布〕Bivariate normal distribution 双变量常态分配〔布〕Blend 混,混合Block 量块,〔实验〕区,方块Block design 实验区设计Block diagram 方块图Block factor 地区因素Block in series 串联方块Boundary 界Boundary, cell 组界Bowker-Goode variables plan Bowker-Goode 记量值〔抽样〕打算Bowl drawing 碗珠抽样Bowl experiment 碗珠实验Bowl test 碗珠试验Bowley's coefficient of skewness Bowley偏态系数Bowley's formula Bowley公式Bureau of Ordnance, U.S. Navy 美国海军兵工署Break-even chart 损益平稳图Break-even point (BEP) 损益平稳点Breakthrough 突破British Standards Institution 英国标准协会Broken curve 中断曲线Broken series 中断数列Broken trend 中断趋势Built-in test (BIT) 内含测试,自测Bureau of Commodity Inspection and Quarantine (BCIQ) 商品检验局Bulk sampling Burn-in 大宗抽样Business Process Management (BPM) 业务流程治理Buyer 买方,客户CC chart C〔管制〕图Calculated value (Computed value) 运算值Calculation chart 运算图Calendar time 日历时刻Calibration 校正Calibration record 校正记录Camp-Meidell inequality Camp-Meidell不等式Capability 能力Capability, machine 机器能力Capability, process 制程能力Capability ratio 能力比Capacity 能量,容量Caption 纵标目Carrying out the audit 实施稽核Cartogram 统计图Case method 个案法Catastrophic failure 突然故障,崩坏失效,致命失效Category 类别Cauchy distribution Cauchy 分配〔布〕Causality 因果律Cause 缘故Cause, assignable 非机遇缘故Cause, avoidable 可幸免缘故Cause, chance 机遇缘故Cause, common 共同缘故Cause, findable 可查找缘故Cause, random 随机缘故Cause, special 专门缘故Cause, substantial 本质缘故Cause, unavoidable 不可幸免缘故Cause and effect 因果Cause and effect diagram 特性要因图Cell 组Cell boundary 组界Cell deviation (d) 组离差Cell frequency (f) 组次数Cell interval (i,h) 组距Cell limit 组限Cell method 分组法Cell mid-point (Xm) 组中点Cell value 组值Censored sample 检剔样本Censored test 检剔试验Censorship 检剔Census 普查Center line 中线Central inspection station 中央检验站Central limit theory 趋中理论,中央极限理论Central limit theorem 趋中理论,中央极限理论Central line (CL.) 中心线Central moment 中心动差Central ordinate 中纵坐标Central tendency 集中趋势Central value 中值,中心值Certainty 确定性Certified chart 验证图Certified equipment 合格设备Certified quality engineer (CQE) 合格质量工程师Certified quality technician (CQT) 合格质量技术师Certified reliability engineer (CRE) 合格可靠度工程师Certification 验证Chain model 炼结模型Chain reliability 炼结可靠度Chain sampling plan (CHSP) 炼结抽样打算Chance 机遇Chance cause 机遇缘故Chance error (Probable error) 机遇误差,机误Chance factor 机遇因素Chance failure 机遇故障,机遇失效Chance failure period 机遇失效期Chance fluctuation 机遇波动Chance variable 机遇变数Chance variation 机遇变异Change control 改变〔变更〕治理Chaotic variation 纷乱变异Characteristic 〔质量〕特性Characteristic, qualitative 质的特性Characteristic, quantitative 量的特性Characteristic curve, operating (OC curve) 操作特性曲线,OC曲线Characteristic diagram 特性要因图Characteristic function 特性函数Characteristic life 特性寿命Characteristic operating curve (OC curve) 特性操作曲线〔OC曲线〕Characteristic value 特性值Chargeable failure 可计列失效,故障Charlier check Charlier 覆检法Chart 图,〔管制〕图Chart, acceptance control 验收管制图Chart, average and range 平均数及全距〔管制〕图Chart, average number of defects 平均缺点数〔管制〕图Chart, control 管制图Chart, cumulative sum 累积和〔管制〕图Chart, defects per unit 每单位内缺点数〔管制〕图Chart, fraction defective 不良率〔管制〕图Chart, group 多项〔管制)图Chart, individual 个别值〔管制〕图Chart, median 中位数〔管制〕图Chart, moving and range 移动平均数及全距〔管制〕图Chart, moving range 移动全距〔管制〕图Chart, modified control limits 修正管制界限〔管制〕图Chart, multi-variation 变异值〔管制〕图Chart, multiple 复式〔管制〕图Chart, number defectives 不良〔品〕数〔管制〕图Chart, number of defects 缺点数〔管制〕图Chart, percent defective 不良率管制图Chart, range 全距〔管制〕图Chart, run 操作〔记录〕图Chart, shop 工厂〔管制〕图Chart, Shewhart control Shewhart 管制图Chart, two-way control 双向管制图Chebyshev's inequality Chebyshev 不等式Check inspection 复核检验Check sampling 复核检验员Check inspector 复核抽样,卡方Chi-squareXChi-square distribution分配〔布〕,卡方分配〔布〕X检定,卡方检定Chi-square testX分配〔布〕,卡方分配(布〕Chi-squared distributionXChip 小圆片Chronic defect 慢性缺点Chronological chart 时序图Chronological series 时序数列Class 组Class boundaries (True class limits)组界〔真实组限〕Class form 组形Class frequency (f) 组次数Class interval (i,h) 组距Class limit 组限Class mark 组标,中值Class mean 组平均数Class mid-point(Xm) 组中点Class mid-value 组中值Class of median 组中位数Class value 组值Classes, number of 组数Classification chart 分组,分类Classification frequency 分组次数Classification frequency series 分组次数数列Classification of defectives 不良品分类Classification of defects 缺点分类Classfication of failure 失效分类,故障分类Classification process 分组〔方〕法Clearance 间隙,余隙Cluster 集团Cluster sampling 集团抽样Cochran's test Cochran 检定Code 简化,代号Code letter 代字Coded unit 简化单位Coded value 简化值Coding 简化Coding rule 简化规那么Coefficient 系数Coefficient, correlation 相关系数Coefficient of alienation 余相关系数Coefficient of association 相关系数Coefficient of binomial distribution 二项分配〔布〕系数Coefficient of colligation 束联系数Coefficient of contingency 列联系数Coefficient of correlation 相关系数Coefficient of determination (r2) 定限系数Coefficient of dispersion 离势系数Coefficient of kurtosis 峰度系数Coefficient of multiple correlation 复相关系数Coefficient of net correlation 净相关系数Coefficient of net regression 净回来系数Coefficient of non-determination 不定限系数Coefficient of part correlation 部份相关系数Coefficient of partial correlation 部份相关系数Coefficient of rank correlation 等级相关系数Coefficient of reliability 可靠度系数Coefficient of regression 回来系数Coefficient of skewness 偏态系数,偏斜系数Coefficient of variation (CV) 变异系数Cold standby 冷置系数Collective quality 集体品质Columbia sampling table Columbia 抽样打算Column (Column/Row) 行,纵行〔行/列〕Column head 标目Column diagram 直行图Combination 组合Combinational model 复合模型Combined environmental reliability test (CERT) 复合环境可靠度试验Combined failure 复合失效,复合故障Combined stress life test 复合应力寿命试验Commissioning 委制Commodity 商品Common cause (Chance cause) 共同缘故〔机遇缘故〕Company standard 公司标准Companys need 公司需要Company-wide quality control (CWQC) 全公司质量治理Comparability 可比性Comparable measure 可比量数Compensating error 补偿误差Compensating fluctuation 补偿波动Competing product 竞争产品Complete association 全相联Complete block design 完全区集法Complete confounding 完全交络Complete dissociation 全不相联Complete failure 完全故障,完全失效Completely randomized design 完全随机法Complaint 埋怨Complaint index 埋怨指标Completed product verification 成品验证Component 组件,组件Component bar chart 成份条图Component distiibution 组成份分配〔布〕Component part diagram 成份图Component ratio 成份比Component reliability 组件可靠度Component variance 成份变异数Components of variance 变异数成份Composite curve 复合曲线Composite design 复合法Composite hypothesis 复合假设,组合假设Composite unit 复合单位Compound distribution 复合分配〔布〕Compound event 复合事件Compound probability 复合机率Compounding technique 复合法Compressed limit 压缩界限Compressed limit gauging 压缩界限规那么Computed value 运算值Concentric circle diagram 同心圆图Conception of limit 极限概念Conceptual design 概念设计Conceptual design review 概念设计审查Concession 特采,特认Concomitant factor 共变因素Concomitant variable 共变数Concomitant variation 共变异Concurrency 并行Condition maintenance 状态爱护Condition monitoring 状态监督Condition-based maintenance 状态基准爱护Conditional probability 条件机率Conditions of use 使用条件Confidence 信任,信任Confidence coefficient 信任系数,信任系数Confidence interval 信任区间,信任区间Confidence in test results 试验结果的信任度Confidence level 信任水平,信任水平Confidence limit 信任界限,信任界限Confidence range 信任全距,信任全距Configuration control 型态管制Configuration items 型态件Configuration management 型态治理Confirmation 确认Conformance to the requirement 符合要求Conformation 一致Conforming article 合格品Conformity 符合Confounding 交络Confounding, complete 完全交络Confounding, partial 部份交络Connector 连接器Consignment 托付,寄售Consistency 一致性Constancy 恒久性Constancy of great numbers 大数恒久性Constant 常数Constant cause system 恒常缘故系统Constant error 恒常误差Constant failure period 恒常失效期Constant failure rate dustribution 恒常失效率分配〔布〕Constant weight (Fixed weight) 固定权数Constraint 束缚Consultant 治理顾问师Consumer 消费者Consumer acceptance specification 消费者允收规格Consumerism 消费者主义Consumer's risk (CR) 消费者冒险率Consumer test panel 消费者试验小组Consumer preference 消费者偏好Consumer sensitivity test 消费者感官试验Contingency 列联Contingency coefficient 列联系数Contingency table 列联表Contingency theorem 列联理论Continuity correction 连续校正Continuous change 连续变更Continuous data 连续数据Continuous distribution 连续分配〔布〕Continuous production 连续生产Continuous sampling 连续抽样Continuous sampling plan (CSP) 连续抽样打算Continuous series 连续数列Continuous variable 连续变量Contract 合约Contract preparation 拟定合约Contract review 合约检讨Contract requirements 合约需求Contract requirements analysis 合约需求分析Contractors 合约商Contrast analysis 对比分析Control, in 在管制〔状态〕下Control, lack of 缺乏管制Control, out of 超出管制Control, state of 管制状态Control, under 在管制〔状态〕下Control chart 管制图Control chart, cumulative sum 累积和管制图Control chart, defects per unit 每单位内缺点数管制图Control chart, two-way 双向管制图Control chart factor 管制图系数Control chart for attribute 计数值管制图Control chart for variable (measurement) 计量值管制图Control chart method 管制图法Control chart pattern 管制图类型Control factor 管制因素Control gaging (gauging) 管制规测Control level 管制水平Control limit 管制界限Control limit, lower 管制下限Control limit, modified 修正管制界限Control limit, upper 管制上限Control limit factor 管制界限因子Control line 管制线Control of measuring and test equipment 量测与试验设备之管制Control of nonconforming material 不合格物料之管制Control of nonconforming product 不合格产品之管制Control of production 生产管制Control of reliability 可靠度管制Control of verification status 验证状况之管制Control plan 管制打算Control point 管制点Control station 管制站Control system 管制系统Controllability 可管制性Controlled process 管制制程Controlled state 管制状态Controlled variability 管制变异性Controlled variable 管制变数Controlling item 管制项目Convenience lot 合宜的批Convergence 收敛Cooked distribution 中断分配〔布〕Coordinate 坐标Coordinate axis 坐标轴Coordinate line 坐标线Coordination 和谐Coordination for reliability 可靠度和谐Correction 校正,修正Correction, Sheppard Sheppard 校正数Correction factor 修正因子Correction for continuity 连续校正Correction for mean 平均数校正Correction term 校正项Corrective action 矫正行动,改正措施Corrective maintenance 矫正爱护,改正爱护Corrective maintenance time 矫正爱护时刻,改正爱护时刻Corrective sorting 修正选别Correlated measure 相关量数Correlated samples 相关样本Correlation 相关Correlation, coefficient of 相关系数Correlation, direct 直截了当相关Correlation, index of 相关指数Correlation, inverse 反相关Correlation, multiple 复相关Correlation, negative 负相关Correlation, net 净相关Correlation, nonlinear 非线性相关Correlation, nonsense 无意义相关Correlation, part 部份相关,偏相关Correlation, partial 部份相关,偏相关Correlation, perfect 完全相关Correlation, rank 等级相关Correlation, serial 数序相关Correlation, simple 简相关Correlation, zero 零相关Correlation analysis 相关分析Correlation chart 相关图Correlation, coefficient 相关系数Correlation coefficient, rank 等级相关系数Correlation matrix 相关矩阵Correlation of attributes 品性相关Correlation ratio 相关比Correlation of x on y x与y的相关比Correlation ratio of y on x y与x的相关比Correlation scatter chart 相关散布图Correlation surface 相关面Correlation table 相关表Correlation theory 相关理论Correlogram 相关图Corrosive atmosphere 腐蚀性空气Cost 成本,费用Cost, acquisition 取得成本Cost, appraisal 评估〔鉴定〕成本Cost, external failure 外部失败成本Cost, internal failure 内部失败成本Cost, life cycle 寿命周期成本Cost, logistic 后续成本Cost, prevention 预防成本Cost, quality 质量成本Cost, quality control 质量治理成本Cost, rework 重加工成本Cost effectiveness 成本效益Cost function 成本机能Cost model for reliability optimization 可靠度最正确化成本模式Cost reduction 成本减低Count (Countable) data 点计数据Counter variation 反行变异Co-variation 共变异Covariance 共变异数,共变数Covariance analysis 共变异数分析Covariance matrix 共变异矩阵Craps, game of 掷骰游戏Credibility 信用Creep failure 潜变失效,潜变故障Crest 峰Criteria for workmanship 工作技艺准那么Criterion 准那么,规范Criterion, acceptance 验收准那么〔规范〕Critical component control 重要组件管制Critical defect 严峻缺点Critical defective 严峻不良品Critical design review 关键设计审查Critical failure 关键故障,严峻失效Critical items 关键品目,重要件Critical path 要径Critical path analysis 要径分析法Critical region 临界区域,弃却区域,判定区Critical value 临界值,判定值Criticality 严峻性,关键性Cross 交叉Cross check 互校Cross classification 交叉分类Cross correlation 交叉相关Cross formula 交互公式Cross-hatch 交叉线Cross-hatched map 交叉图Cross-over design 交叉打算Crossed design 交叉法Crude mode 概括众数Crude moment 概括动差Cubic chart (diagram) 立方图Culled 检选Cumulant 累积数Cumulation, downward 向下累积Cumulation, total 全部累积Cumulation, upward 向上累积Cumulation average chart 累积平均数〔管制〕图Cumulative curve 累积曲线Cumulative curve chart 累积曲线图Cumulative damage 累积损坏Cumulative distribution (Ogive) 累积分配〔布〕Cumulative distribution function 累积分配〔布〕函数Cumulative error 累积误差Cumulative failure frequency 累积故障次数,累积失效次数Cumulative frequency 累积次数Cumulative frequency arrangement 累积次数排列Cumulative frequency curve 累积次数曲线Cumulative frequency 累积次数曲线图Cumulative frequency distribution 累积次数分配〔布〕Cumulative frequency polygon 累积〔次数〕多边形Cumulative frequency (probability) function 累积次数〔机率〕函数Cumulative frequency table 累积次数表Cumulative function 累积函数Cumulative graph 累积图Cumulative hazard function 累积冒险函数Cumulative mean 累积平均数Cumulative normal distribution 累积常态分配Cumulative number of failures 累积失效数,累积故障数Cumulative percentage of failures 累积失效百分率,累积故障百分率Cumulative probability distribution 累积机率分配〔布〕Cumulative sum 累积和Cumulative sum chart 累积和〔管制〕图Cumulative sum control chart 累积和管制图Cumulative terms 累积项Curtailed (Truncated) inspection 截略检验Curtailed (Truncated) sample inspection截略样品检验Curtailed sampling 截略抽样Curtailed sampling inspection 截略抽样检验Curtaijed sampling plan 截略抽样打算Curtailment of sampling plan 抽样打算之截略Curve 曲线Curve, frequency 次数曲线Curve, normal 常态曲线Curve chart (diagram) 曲线图Curve fitting 曲线配合Curve of error 误差曲线Curve of means 平均数曲线Curve of probability 机率曲线Curve type criterion 曲线型准那么Curve shape 曲线形状Curvilinear correlation 曲线相关Curvilinear regression 曲线回来Curvilinear trend 曲线趋势Curvilinearity 曲线性Customer 客户,顾客Customer complaint 顾客埋怨Customer feedback information 顾客回馈信息Customer incurred cost 顾客引发成本Customer operation cost 顾客作业成本Customer repair cost 顾客修理成本Customer requirement 顾客要求Customer satisfaction 顾客中意度Customer's need 顾客需要Cusum chart 累积和〔管制〕图Cycles 周期Cycles between failures 失效间隔周期,故障间隔周期Cycle of operation 操作周期Cyclic curve 周期〔循环〕曲线Cyclic damage 周期性损坏Cyclic load 周期性负荷Cyclical deviation 周期〔循环〕离差Cyclical fluctuation 周期波动Cyclical trend 周期趋势Cyclical movement 周期移动Cyclical variation 周期变异Cycling failure rate 周期性失效率,周期性故障率DD chart d管制图Data 数据Data analysis 数据分析Data bank 资料室〔库〕Data exchange program 数据交换打算Data, inspection 检验数据Data item 数据项,文件项目Data processing 数据处理Death rate 死亡率Debug (debugging) 除错Decile 十分位数Decimal fraction 小数Decision function 决策函数Decision line 决定线Decision making 决策Decision variable 决策变数Decreasing failure rate distribution 递减失效率分配(布〕Decrement 减量Decrement rate 减率Defect 疵病,缺点Defect, chronic 慢性缺点Defect, critical 严峻缺点Defect, incidental 偶发缺点Defect, major 要紧缺点Defect, minor 次要缺点Defect, sporadic 突发缺点Defect and failure analysis 缺点与失效分析Defect chart 缺点数〔管制〕图Defect Free 零缺点Defect prevention 缺点预防Defects, number of 缺点数Defects classification 缺点分类Defects per hundred units (dphu) 百件缺点数Defects per unit chart 每单位〔内〕缺点数〔管制〕图Defects per unit plan 每单位〔内〕缺点数〔管制〕打算Defective 不良品Defective, fraction 不良率Defective chart 不良品数〔管制〕图Defective material 不良材料Defective number 不良品数Defective part 不良零件Defective parts, percentage of 不良零件百分率Defective prevention 不良品预防Defective unit 不良品〔单位〕Defectives, number of 不良〔品〕数Defectives classification 不良品分类Definition(s) 定义Deflated series 调剂数列Deflated value 调剂值Deflating index 调剂指数Degradation 劣化Degradation failure 劣化故障,劣化失效Degree of accuracy 准确度Degree of approximation 近似度Degree of association 相联度Degree of confidence 信任〔赖〕度Degree of contribution 奉献度Degree of freedom (DF) 自由度Degree of reliability 可靠度Delivery 交货,出厂Delivery inspection 出厂检验Delivery qulaity 出厂品质Delivery time 运送时刻Demerit 减点Demerit chart 减点〔数〕〔管制〕图Demerit rating 减点评比Demerits per unit 每单位〔内〕减点数Demonstration 示范,验证,展现Demonstration test 验证试验,展现试验Density function 密度函数Dependability 可恃性,相依性,依靠性Dependent factor 因变因子Dependent failure 相依失效,相依故障Dependent variable 因变数Derating 降等,额降,减额定Derivation 导出Derived table 导出表Descriptive item 说明项Descriptive statistics 记述统计〔学〕Design 设计Design baseline 设计准那么Design change 设计变更Design considerations 设计考虑Design control 设计管制Design change control 设计变更管制Design control, new 新设计管制Design criterion 设计准那么Design disclosure package 设计启导文件Design effect cost 设计效应成本Design freeze 设计冻结Design in 设计到里面去Design input 设计输入Design matrix 设计矩阵Design output 设计输出Design of experiment 实验打算Design planning 设计规画Design profile 设计轮廓Design proving 设计认可Design qualification 设计之合格性Design release 设计公布Design requalification 设计合格之再认定Design review 设计审查Design specification 设计规格Design validation 设计确认Design verification 设计验证,查证Design verification test 设计验证试验Designation 名称Designed experiment 实验打算Destructive inspection (test) 破坏性检验〔试验〕Detailed design 细部设计Detailed design review 细部设计审查Detailed inspection (100% inspection) 全数检验〔百分之百检验〕Detect 侦测Detection of a failure unit 失效单位之检测,故障单位之检测Detection time 检测时刻Deterioration 衰变,劣化Determination, coefficient of 定限系数Development 进展Development test 进展试验Deviation 离差Deviation, average 平均差Deviation, mean 平均差Deviation, root-mean-square 均方根差Deviation, sample standard 样本标准差Deviation, standard 标准差Deviation, universe standard 群体标准差。
品质术语中英文对照
品质人员名称类:QC quality control品质管理人员F QC final quality control终点质量管理人员IP QC in process quality control制程中的质量管理人员O QC output quali y control最终出货质量管理人员IQC incoming quality control进料质量管理人员TQC total quality control全面质量管理POC passage quality control段检人员QA quality assurance质量保证人员OQ A output quality assurance出货质量保证人员Q Equality engineering品质工程人员二、品质保证类:FAI first article inspection新品首件检查FAA first article assurance首件确认TVR tool verification report模具确认报告3B3B模具正式投产前确认CP cap abi ity index能力指数CPK cap abi ity index of process模具制程能力参数SSQ A standardized supplier quality合格供货商品质评估OOB A out of box audit开箱检查QFD quality function deployment品质机能展开FMEA failure model effectiveness analysis失效模式分析8 disciplines 8项回复内容FA final audit最后一次稽核CAR corrective action request改正行动要求corrective action report改正行动报告三、F QC运作类AQL Acceptable Quality Level运作类允收品质水准S/S Sample size抽样检验样本大小ACC Accept允收REE Reject拒收CR Critical极严重的MAJ Major主要的MIN Minor轻微的A OQ Average Output Quality平均出厂品质A OQL Average Output Quality Level平均出厂品质Q/R/S Quality/Reliability/Service品质/可靠度服务MIL-STD Ml itary-Standard军用标准PPM Percent Per Milon百万分之一L/N Lot Number 生产批号四、制程统计品管专类:SPC Statistical Process Control统计制程管制SQC Statistical Quality Control统计质量管理R Range全距A RAver ary Range全距平均值UCL Upper Central Limit管制上限LCL Lower Central Limit管制下限MAX Maximum最大值MIN Minimum最小值GRR Gauge Reproducibility&Repeat abilty量具之再制性及重测性判断量可靠与否DIM Dimension尺寸DIA Diameter直径FREQ Frequency频率N Number样品数五、其它品质术语类:PDCA Plan Do Check Action计划执行检查总结QI Quali y Improvement品质改善QP Quality Policy目标方针SI-SIV Special l-SpecialⅣV特殊抽样水准等级P/N Part Number料号AOD Accept On Deviation特采UAI Use As It首件检查报告PPM Percent Per Million百万分之一QCC Quality Control Circle品质圈Plan Do Check Action计划执行检查总结ZD Zero Defect零缺点TQM Total Quality Management全面品质管理MRB Material Reject Bill退货单LQ L Limiting Quality Level最低品质水准RMA Return Material Audit退料认可Q AN Quality A me lion rate Notice品质改善活动ADM Absolute Dimension Measure mat全尺寸测量QT Quality Target品质目标7QC Tools 7 Quality Controll Tools品管七大手法六、QS-9000中的术语:APQP Advanced Product Quality Planning and Control Plan,产品质量先期策划和控制计划PPAP Production Part Approval Process,生产件批准程序FMEA Potential Failure Mode and Effects Analysi,潜在失效模式及后果分析MSA Measure System Analysis,测量系统分析SPC Statistical Process Control,统计过程控制六、QS-9000中的术语:APQP Advanced Product Quality Planning and Control Plan,产品质量先期策划和控制计划PPAP Production Part Approval Process,生产件批准程序FMEA Potential Failure Mode and Effects Analysis,潜在失效模式及后果分析MSA Measure System Analysis,测量系统分析SPC Statistical Process Control,统计过程控制Audit审核Audit 能力Capability 能力Capability Indices 能力指数Control Plans 控制计划Corrective Action 纠正措施文件Documentation 文件work instruction作业指导书Nonconformity 不符合项Nonconforming products不合格品Unqualified 不合格Defective Parts Per Milon,DPPM 每百万零件不合格数Preventive Action预防措施Procedures程序Process Flow Diagram过程流程图,Quality Manual质量手册Quality Plan质量计划Quality Planning质量策划Quality Records 质量记录Reaction Plan反应计划Repair返修返工Rework现场Site分承包方Subcontractors产品product质量quality质量要求quality requirement顾客满意customer satisfaction质量管理体系quality management system 质量方针quality policy质量目标qua ity objective质量管理quality management质量控制quality control质量保证quality assurance组织organization顾客customer供方supplier过程process服务service设计与开发design and development特性characteristic可追溯性traceability合格conformity缺陷defect纠正correction让步concession放行release报废scrap规范specification评审review测量measurement计数型数据Attributes Data普通原因CommonCause单值Individual均值Mean随机抽样Random Sampling 极差Range特殊原因Special Cause稳定性Stabi ity子组Subgroup计量型数据Variables Data 变差Variation固有变差Inherent Variation 总变差Total Variation偏倚Bias重复性Repeatability再现性Reproduc ibi ity稳定性Stability Linearity分辨率Resolution过程更改Process change过程更改Process change质量功能展开QFD过程特殊特性Special Process Characteristic产品特殊特性Special Product Characteristic外观项目Appearance Item初始过程能力Preliminary Process Capability材料清单Bill of Material设计确认Design Validation设计验证Design Verification顾客的呼声Voice of the Customer过程的呼声Voice of the Process七、常用缩略词语:ES工程规范Engineering SpecificationKCC关键控制特性(GM) Key Control CharacteristicKPC关键产品特性(GM) Key Product CharacteristicOEM整车厂Original Equipment ManufacturerSC重要(特殊) 特性Significant(Special) Characteristic ANOVA方差分析法Analysis of Variance CFT多方论证小组Cross function T eam DFMEA设计失效模式及后果分析Design Failure Mode and Effects Analysis DOE试验设计Design of Experiment DVP&R设计验证计划和报告Design verification Plan and ReportFTC试生产能力First Time CapabilityGR&R量具的重复性和再现性Gage Repeatability and ReproducibilityP FMEA过程失效模式及后果分析Process Failure Mode and Effect AnalysisSF ME A系统失效模式及后是分析System Failure Mode and Effect Analysis QSR 质量体系要求Quality System RequirementQFD质量功能展开Quality Function DeploymentTGR运行情况良好Things Gone RightTGW运行情况不良Things Gone WrongVE/VA价值工程/价值分析Value Engineering/Value AnalysisBOM物料清单Bill of MaterialCpk 稳定过程的能力指数Cap ablity for stable processLCL 下控制限Lower Control LimitUCL 上控制限Upper Control LimitLSL 工程规范下限Lower Specification LimitUS L 工程规范上限Upper Specification LimitPpk 性能指数The performance indexMRB 物料评审Material Review BoardPSW 零件提交保证书Part Submission WarrantX(-)--R图均值一极差图Average-Range ChartSR PC 供方要求产品更改Supplier Request for Product ChangeIAA临时批准授权Interim Approval AuthorizationAAR外观件批准报告Appearance Approval ReportPTR试生产(报告) Production Trial Run(Report)DCP尺寸控制计划(动态控制计划) Dimension Control Plan(Dynamic Control Plan) 防错(POKA-YOKE) Mistake ProofingECN:工程变更通知单BOM:物料清单SOP:作业指导书SIP:检验指导书AC:允收RE:拒收AQL:品质允收水准CR:致命缺陷9.MAX:严重缺陷MIN:轻微缺陷QA:品质保证IP QC:制程品质控制IQC:进料品质控制QE:品质工程F MEN:失效模式及后果分析SPC:统计过程控制CPK:工序能力指数SQC:统计品质管控QMS:质量管理体系ISO:国际标准化组织ISO 9000:质量管理体系ISO 14001:环境管理体系CAR:客户投诉不良改善报告CPAR:纠正/预防措施报告TQC:全面质量管理ROHS:电机电子产品之危害物质限用指令QCC:品管圈UCL:管制上限LCL:管制下限14.P DCA:计划、实施、检查、处置5M1E:人员、机器、物料、方法、测量、环境5W2H:何时、何地、何人、何事、为何、如何、几何(几多、多少) PCBA:印刷电路板SQM:供应商品质管理ECR:设计变更IQC:来料检验IP QC:制程检验F QC:最终检验(成品检验)O QC:出厂检验QA:品质保证QE:品质工程PQE:产品品质工程师PE:产品工程师PC:生产控制(生管)MC:物料控制ME:机械工程师FE:设备工程师SQC:统计品管TQC:全面品质管制QFD:质量机能展开we nku.con CW QC:日本模式TQC-全公司品管TQM:全面品质管理AQL:判定基准-不良率为%PPM:百万分之一不良率SOP:标准作业程序SIP:标准检验程序PDCA:戴明管理循环(Plan设计、Do制造,实施、Check检查、Action修正) BOM:物料清单ECO:工程变更指令MN:制造通知MPI:作业指导书TPI:测试指导书API:调试指导书Rev:版本WIP:在制品MAJ:主要缺点MIN:次要缺点CRI:严重缺点SAMPLE:样品。
质量词汇
质量体系词汇质量 quality等级 grade质量环 quality loop质量螺旋quality spiral质量方针quality policy质量管理quality management质量保证quality assurance质量控制 quality control质量体系quality system质量计划quality plan质量审核quality audit质量监督quality surveillance质量体系评审quality system review设计评审 design review检验 inspection可追溯性 traceability超差特许 concession waiver偏离许可 production permit ;deviation permit可靠性 reliability产品责任;服务责任 product liability;service liability 不合格(不符合项) nonconformity缺陷 defect规范 specification实体 entity ;item过程 process程序 procedure产品 product服务 service提供服务 service delivery单位 organization组织结构 organization structure顾客 cutomer供方 supplier需方 purchaser承包方 contractor质量要求requirement for quality社会要求requirememt of society可信性dependability相容性compatibility互换性interchangeability安全性safety合格conformity鉴定过程qualification process鉴定合格qualified自检self-inspection验证verification确认validation客观证据objective evidence质量方针quality policy质量管理quality management质量策划quality planning质量控制quality control质量保证quality assurance质量体系quality system全面质量管理total qualitymanagement质量改进quality improvement管理评审managemen review合同评审contract review设计评审design review质量手册quality manual质量环quality loop质量成本quality-related costs质量损失 quality losses质量保证模式model for quality assurance 证实程度degree of demonstration质量评价quality evaluation质量监督quality surveillance停止点hold point质量审核quality audit质量审核观察结果quality audit observation 质量审核员quality auditor受审核方auditee预防措施preventive action纠正措施corrective action不合格品处置disposition of nonconformity 返修repair返工rework。
质量英语词汇大全(中英对照)
品质名词(中英对照)AABC analysis ABC 分析Abnormality 不正常性Abscissa 横坐标Absolute deviation 绝对离差Absolute dispersion 绝对离势Absolute error 绝对误差Absolute frequency 绝对次数Absolute number 绝对数Absolute reliability 绝对可靠度Absolute term 绝对项Absolute value 绝对值Absolute variation 绝对变异Abstract number 抽象数Abstract unit 抽象单位Accelerated factor 加速系数,加速因子Accelerated life test 加速寿命试验Accelerated test 加速试验Acceleration 加速度Acceptable limit 允收界限Acceptable process 允收制程水平Acceptable quality 允收品质Acceptable quality level (AQL) 允收质量水平Acceptable reliability level (ARL) 允收可靠度水平Acceptability 允收性Acceptability criterion 允收标准Acceptance 允收,验收Acceptance, probability of 允收机率Acceptance, region of 允收区域Acceptance and rejection criteria 允收与拒收准则Acceptance boundary 允收界限Acceptance coefficient 允收系数Acceptance control chart 验收管制图Acceptance cost 验收费用Acceptance criteria 允收准则Acceptance error 允收误差Acceptance inspection 验收检验Acceptance limit 允收界限Acceptance line 允收线Acceptance number 允收(不良品)数Acceptance plan 验收计划Acceptance procedure 验收程序Acceptance/rectification scheme 允收/精选方案Acceptance sampling, attribute 计数值验收抽样Acceptance sampling, variable 计量值验收抽样Acceptance sampling plan 验收抽样计划Acceptance sampling scheme 验收抽样方案Acceptance test 验收试验Acceptance value 允收值Acceptance zone 允收区域Acceptance product 允收品Accepting lot 允收批Access time 接近时间,故障诊断时间Accessibility 可接近性Accident rate 意外率Accidental error 偶误,偶然误差Accidental fluctuation 偶然波动Accidental movement 意外移动Accounting test 验算(决算)试验Accumulated operating time 累积操作时间Accuracy 准确度Accuracy of data 数据准确度Accuracy of estimation 估计准确度Accuracy of the mean 平均数准确度Achieved availability 实际可用度Action 行动,措施Action, corrective 矫正行动(措施)Action control chart 行动管制图Action limit 行动界限Active line 行动线Active maintenance time 实际维护时间Active parallel redundancy 主动并复联(置)Active preventive maintenance 现行预防维护时间Active redundancy 主动复联(置)Active repair time 实际修复时间Active standby 主动备用Active time 运用时间Actual frequency 实际次数Actual limit 实际界限Actual range 实际全距Actual value 实际值Adaptability 可适应性Adaptive control 修改管制Addition theorem 加法定理Additivity 加法性,可加性Adjusted average 修正平均数Adjusted value 修正值Adjustment factor 调整系数Administration time for a repair 修复之管理时间Administrative time 管理时间Adopted value 采用值Advisory Group on Reliability of Electronic Equipment (AGREE) 电子装备可靠度顾问团Aeronautical Radio, Incorporated (ARINC) 航空无线电公司After-sales service 售后服务Age 年限Age at death 死亡年限Age at failure 失效年限Age-based maintenance 年限基准维护Aggregative method 综合法Aging 老化Agreement of quality assurance 质量保证之协议Agreement on verification method 验(查)证方法之协议Alarm signals 警告(报)讯号Alert time 待命时间Algebraic sum 代数和Algorism (Algorithm) 阿拉伯数字计数法Alias 假名Alienation 余相关Alignment chart 列线图Allocation 配当Allocation of reliability 可靠度配当Allowable percent defective (Acceptable quality level, AQL) 允收不良率(允收质量水平)Allowance 允差,裕度Alternative hypothesis 对立假设American Management Association (AMA) 美国管理协会American National Standards Institute (ANSI) 美国标准协会American Society for Quality Control (ASQC) 美国质量管理学会American Society for Mechanical Engineers (ASME) 美国机械工程师学会American Society for Testing and Materials (ASTM) 美国材料试验学会American Standard Association (ASA) 美国标准协会American Statistical Association (ASA) 美国统计协会American War Standards (AWS) 美国战时标准Ambient condition 周遭条件Analysis, sequential 逐次分析Analysis by accumulated frequency 累积法,累积次数分析Analysis by non-accumulated frequency 次数法,非累积次数分析Analysis of correlation 相关分析Analysis of covariance 共变异数分析Analysis of means (AVON) 平均数分析Analysis of problem 问题之分析Analysis of variance (ANOVA) 变异数分析Analysis sample 分析样本Analytical error 分析误差Angular transformation 角度转(变)换Anti-logarithm 逆对数Anti-mode 逆众数AOQL Sampling Table 平均出厂质量界限抽样数Applicability 应用性Applied statistics 应用统计学Apportionment of reliability 可靠度配当Apportionment techniques 配当技术Appraisal cost 鉴定成本,评估成本Appraisal system 评估制度Appraisal of quality 质量评估Approach to sequential testing 逐次试验法Approval of processes and equipment 核准制程与设备Approximate mode 近似众数Approximate number 近似数值Approximation 近似法,概算AQL (Acceptable quality level) 允收(质量)水平Arbitrary average (Assumed average,Arbitrary mean) 假定平均数Arbitrary origin 假定原点Arbitrary scale 假定标度Area bar chart 面积条图Area chart (diagram, graph) 面积图Area sampling 地区抽样Arithmetic average 算术平均数Arithmetic cross 算术交叉Arithmetic graph 算术图Arithmetic line chart 算术线图Arithmetic mean 算术平均数Arithmetic paper 算术纸Arithmetic probability paper 算术机率纸Arithmetic progression (Arithmetic series) 算术级数,等差级数Arithmetic scale 算术标度,等差标度Arithmetic series 算术级数,等差级数Army Ordnance Table 陆军兵工署(抽样)表Army Service Forces Table 陆军(抽样)表序列Array 序列Array distribution 序列分配(布)Array of data 数据序列Assemble 装配(组立)Assembled product 装配品Assembly 装配件Assembly inspection 装配检验Assembly quality analysis report 装配质量分析报告Assessed failure rate 评估失效率Assessed mean active -maintenance time 评估时间现行维护时间Assessed mean life 评估平均寿命Assessed mean time between failures 评估平均失效间格时间Assessed mean time to failure 评估平均失效前时间Assessed reliability 评估可靠度Assessed value 评估值Assessment of subcontractor 分包商之评鉴Assignable cause (Special cause) 非机遇原因(特殊原因)Assignable variation 非机遇变异Associated dependent variable 相联因变数Associated variate 相联变量Association coefficient 相联系数Association of attribute 品性相联Association table 相联表,联合表Assumed mean (Assumed average,Arbitrary average) 假定平均数Assumed median 假定中位数Assumed origin 假定原点Assurance quality 保证质量Assurance function 保证功能Asymmetrical distribution 不对称分配(布)Asymmetry 不对称Asymptotic distribution 趋近分配(布)At random 随机Attribute 计数值,属性Attribute classification 品性分类Attribute data 计数数据Attribute inspection 计数值检验Attribute sampling 计数值抽样Attribute sampling plan 计数值抽样计划Attribute testing (Go no-go testing) 计数值试验(通过与不通过试验)Attribute value 计数值Audit 稽核Audit for reliability 可靠度稽核Audit of decision 稽核决策Audit plan 稽核计划Audit report 稽核报告Auditing report 稽核报告Auto-correlation 自动相关Automatic switch-over redundancy 自动切换复联(置)Automatic test equipment (Am) 自动试验装备Auto-regression 自动回归Availability 可用性,可用度Average (Mean) 平均数,平均值Average, grand 总平均Average, moving 移动平均数Average, sample 样本平均数Average, standard error of 标准误平均数Average, universe 群体平均数Average, weighted 加权平均数Average amount of inspection 平均检验数Average and range chart 平均数及全距(管制)图Average availability 平均可用度Average deviation (A.D.) (Mean deviation) 平均差Average error (Mean error) 平均误差Average number of defects 平均缺点数Average of ratios 比例平均数Average outgoing quality (AOQ) 平均出厂质量Average outgoing quality curve 平均出厂质量曲线Average outgoing quality level 平均出厂质量水平Average outgoing quality limit (AOQL) 平均出厂水平Average quality level 平均出厂质量界限Average quality level line 质量平均线Average quality protection 平均质量保护Average range 平均全距Average run length (ARL) 平均连串长度Average sample number (ASN) 平均样品数Average range 平均全距Average run length (ARL) 平均连串长度Average sample number(ASN) 平均样本数Average sample number curve 平均样本曲线Average sample size (ASS) 平均样本大小Average sample size curve 平均样本大小曲线Average sample 平均抽样Average total inspection (ATI) 平均总检验(件)数Average total inspection curve 平均总检验数曲线Average value 平均值Avoidable cause 可避免之原因Avoidable quality cost 可避免之质量成本Axiom 公理Axis 轴Axis of abscissa 横轴Axis of ordinate 纵轴BBad lot 坏批Balance frequency 平衡次数Balanced complete type 平衡完备型Balanced design 平衡设计Balanced experiment 平衡实验Balanced incomplete type 平衡不完备型Balanced sample 平衡样本Band chart 带形图Band curve chart 带形曲线图Bank of reliability data 可靠度数据库Bar chart (diagram) 条(形)图Bartlett's test 巴特莱特试验Base line 基线Base number 基数Base period 基期Base point 基点Basic reliability 基本可靠度Batch (Lot) 批Batch of material 材料批Batch process 分批制造方法Batch size 批量Batch testing 批试验Bathtub curve 浴缸曲线Bathtub failure curve 浴缸失效曲线Bayes' estimator 贝式估计式Bayes' theorem 贝式定理Bayesian approach 贝式法Bayesian approcah to design 贝式设计法Bayesian estimation 贝式估计Bead map 标珠图Bell-shaped curve 钟形曲线Bell-shaped distribution 钟形分配(布)Bell-shaped failure pattern 钟形失效型态JBell System 贝尔系统Bell Telephone Laboratories 贝尔电话实验室Bell Telephone Laboratories Sampling Table 贝尔(电话实验室)抽样表Benign failure 无危险的失效Bernoulli distribution 白努利分配(布)Best fit 最适配合Best fitting line 最适线Best fitting curve 最适曲线Best linear invariant estimator 最佳线型不变估计式Best linear unbiased estimator 最佳线型不偏估计式Beta coefficient β系数Beta distribution β分配(布)Beta function β函数Between-class variance 组间变异数Between-column variance 组间变异Between-column variation 行间变异Between-row variation 列间变异Between sample variation 样本间变异Bias 偏差Bias, downward 向下偏差Bias, downward type 向下型偏差Bias, upward 向上偏差Bias, upward type 向上型偏差Biased error 偏误Biased estimate 偏差估计Biased sample 偏差样本Biased test 偏差试验Bilateral 双边Bill of material (BOM) 物料清单Bimodal 双峰Bimodal curve 双峰曲线Bimodal distribution 双峰分配(布)Bimodal redundancy 双峰型复联(置)Bimodality 双峰性Binary system 二元制Binomial, skewed 偏态二项Binomial coefficient 二项系数Binomial curve 二项曲线Binomial distribution 二项分配(布)Binomial equation 二项方程式Binomial expansion 二项展开式Binomial population 二项群体Binomial probability distribution 二项机率分配(布)Binomial probability paper(BIPP) 二项机率纸Binomial series 二项级数Binomial theorem 二项定理Bi-serial 双数列Biserial correlation 双数列相关Biserial coefficient of correlation 双数列相关系数Biserial ratio of correlation 双数列相关比Bivariate 双变量Bivariate distribution 双变量分配(布)Bivariate frequency distribution 双变量次数分配(布)Bivariate normal distribution 双变量常态分配(布)Blend 混,混合Block 量块,(实验)区,方块Block design 实验区设计Block diagram 方块图Block factor 地区因素Block in series 串联方块Boundary 界Boundary, cell 组界Bowker-Goode variables plan Bowker-Goode 记量值(抽样)计划Bowl drawing 碗珠抽样Bowl experiment 碗珠实验Bowl test 碗珠试验Bowley's coefficient of skewness Bowley偏态系数Bowley's formula Bowley公式Bureau of Ordnance, U.S. Navy 美国海军兵工署Break-even chart 损益平衡图Break-even point (BEP) 损益平衡点Breakthrough 突破British Standards Institution 英国标准协会Broken curve 中断曲线Broken series 中断数列Broken trend 中断趋势Built-in test (BIT) 内含测试,自测Bureau of Commodity Inspection and Quarantine (BCIQ) 商品检验局Bulk sampling Burn-in 大宗抽样Business Process Management (BPM) 业务流程管理Buyer 买方,客户CC chart C(管制)图Calculated value (Computed value) 计算值Calculation chart 计算图Calendar time 日历时间Calibration 校正Calibration record 校正记录Camp-Meidell inequality Camp-Meidell不等式Capability 能力Capability, machine 机器能力Capability, process 制程能力Capability ratio 能力比Capacity 能量,容量Caption 纵标目Carrying out the audit 实施稽核Cartogram 统计图Case method 个案法Catastrophic failure 突然故障,崩坏失效,致命失效Category 类别Cauchy distribution Cauchy 分配(布)Causality 因果律Cause 原因Cause, assignable 非机遇原因Cause, avoidable 可避免原因Cause, chance 机遇原因Cause, common 共同原因Cause, findable 可寻找原因Cause, random 随机原因Cause, special 特殊原因Cause, substantial 本质原因Cause, unavoidable 不可避免原因Cause and effect 因果Cause and effect diagram 特性要因图Cell 组Cell boundary 组界Cell deviation (d) 组离差Cell frequency (f) 组次数Cell interval (i,h) 组距Cell limit 组限Cell method 分组法Cell mid-point (Xm) 组中点Cell value 组值Censored sample 检剔样本Censored test 检剔试验Censorship 检剔Census 普查Center line 中线Central inspection station 中央检验站Central limit theory 趋中理论,中央极限理论Central limit theorem 趋中理论,中央极限理论Central line (CL.) 中心线Central moment 中心动差Central ordinate 中纵坐标Central tendency 集中趋势Central value 中值,中心值Certainty 确定性Certified chart 验证图Certified equipment 合格设备Certified quality engineer (CQE) 合格质量工程师Certified quality technician (CQT) 合格质量技术师Certified reliability engineer (CRE) 合格可靠度工程师Certification 验证Chain model 炼结模型Chain reliability 炼结可靠度Chain sampling plan (CHSP) 炼结抽样计划Chance 机遇Chance cause 机遇原因Chance error (Probable error) 机遇误差,机误Chance factor 机遇因素Chance failure 机遇故障,机遇失效Chance failure period 机遇失效期Chance fluctuation 机遇波动Chance variable 机遇变数Chance variation 机遇变异Change control 改变(变更)管理Chaotic variation 混乱变异Characteristic (质量)特性Characteristic, qualitative 质的特性Characteristic, quantitative 量的特性Characteristic curve, operating (OC curve) 操作特性曲线,OC曲线Characteristic diagram 特性要因图Characteristic function 特性函数Characteristic life 特性寿命Characteristic operating curve (OC curve) 特性操作曲线(OC曲线)Characteristic value 特性值Chargeable failure 可计列失效,故障Charlier check Charlier 覆检法Chart 图,(管制)图Chart, acceptance control 验收管制图Chart, average and range 平均数及全距(管制)图Chart, average number of defects 平均缺点数(管制)图Chart, control 管制图Chart, cumulative sum 累积和(管制)图Chart, defects per unit 每单位内缺点数(管制)图Chart, fraction defective 不良率(管制)图Chart, group 多项(管制)图Chart, individual 个别值(管制)图Chart, median 中位数(管制)图Chart, moving and range 移动平均数及全距(管制)图Chart, moving range 移动全距(管制)图Chart, modified control limits 修正管制界限(管制)图Chart, multi-variation 变异值(管制)图Chart, multiple 复式(管制)图Chart, number defectives 不良(品)数(管制)图Chart, number of defects 缺点数(管制)图Chart, percent defective 不良率管制图Chart, range 全距(管制)图Chart, run 操作(记录)图Chart, shop 工厂(管制)图Chart, Shewhart control Shewhart 管制图Chart, two-way control 双向管制图Chebyshev's inequality Chebyshev 不等式Check inspection 复核检验Check sampling 复核检验员Check inspector 复核抽样Chi-square ,卡方Chi-square distribution 分配(布),卡方分配(布)Chi-square test 检定,卡方检定Chi-squared distribution 分配(布),卡方分配(布)Chip 小圆片Chronic defect 慢性缺点Chronological chart 时序图Chronological series 时序数列Class 组Class boundaries (True class limits)组界(真实组限)Class form 组形Class frequency (f) 组次数Class interval (i,h) 组距Class limit 组限Class mark 组标,中值Class mean 组平均数Class mid-point(Xm) 组中点Class mid-value 组中值Class of median 组中位数Class value 组值Classes, number of 组数Classification chart 分组,分类Classification frequency 分组次数Classification frequency series 分组次数数列Classification of defectives 不良品分类Classification of defects 缺点分类Classfication of failure 失效分类,故障分类Classification process 分组(方)法Clearance 间隙,余隙Cluster 集团Cluster sampling 集团抽样Cochran's test Cochran 检定Code 简化,代号Code letter 代字Coded unit 简化单位Coded value 简化值Coding 简化Coding rule 简化规则Coefficient 系数Coefficient, correlation 相关系数Coefficient of alienation 余相关系数Coefficient of association 相关系数Coefficient of binomial distribution 二项分配(布)系数Coefficient of colligation 束联系数Coefficient of contingency 列联系数Coefficient of correlation 相关系数Coefficient of determination (r2) 定限系数Coefficient of dispersion 离势系数Coefficient of kurtosis 峰度系数Coefficient of multiple correlation 复相关系数Coefficient of net correlation 净相关系数Coefficient of net regression 净回归系数Coefficient of non-determination 不定限系数Coefficient of part correlation 部份相关系数Coefficient of partial correlation 部份相关系数Coefficient of rank correlation 等级相关系数Coefficient of reliability 可靠度系数Coefficient of regression 回归系数Coefficient of skewness 偏态系数,偏斜系数Coefficient of variation (CV) 变异系数Cold standby 冷置系数Collective quality 集体品质Columbia sampling table Columbia 抽样计划Column (Column/Row) 行,纵行(行/列)Column head 标目Column diagram 直行图Combination 组合Combinational model 复合模型Combined environmental reliability test (CERT) 复合环境可靠度试验Combined failure 复合失效,复合故障Combined stress life test 复合应力寿命试验Commissioning 委制Commodity 商品Common cause (Chance cause) 共同原因(机遇原因)Company standard 公司标准Companys need 公司需要Company-wide quality control (CWQC) 全公司质量管理Comparability 可比性Comparable measure 可比量数Compensating error 补偿误差Compensating fluctuation 补偿波动Competing product 竞争产品Complete association 全相联Complete block design 完全区集法Complete confounding 完全交络Complete dissociation 全不相联Complete failure 完全故障,完全失效Completely randomized design 完全随机法Complaint 抱怨Complaint index 抱怨指标Completed product verification 成品验证Component 组件,组件Component bar chart 成份条图Component distiibution 组成份分配(布)Component part diagram 成份图Component ratio 成份比Component reliability 组件可靠度Component variance 成份变异数Components of variance 变异数成份Composite curve 复合曲线Composite design 复合法Composite hypothesis 复合假设,组合假设Composite unit 复合单位Compound distribution 复合分配(布)Compound event 复合事件Compound probability 复合机率Compounding technique 复合法Compressed limit 压缩界限Compressed limit gauging 压缩界限规则Computed value 计算值Concentric circle diagram 同心圆图Conception of limit 极限概念Conceptual design 概念设计Conceptual design review 概念设计审查Concession 特采,特认Concomitant factor 共变因素Concomitant variable 共变数Concomitant variation 共变异Concurrency 并行Condition maintenance 状态维护Condition monitoring 状态监督Condition-based maintenance 状态基准维护Conditional probability 条件机率Conditions of use 使用条件Confidence 信任,信赖Confidence coefficient 信任系数,信赖系数Confidence interval 信任区间,信赖区间Confidence in test results 试验结果的信赖度Confidence level 信任水平,信赖水平Confidence limit 信任界限,信赖界限Confidence range 信任全距,信赖全距Configuration control 型态管制Configuration items 型态件Configuration management 型态管理Confirmation 确认Conformance to the requirement 符合要求Conformation 一致Conforming article 合格品Conformity 符合Confounding 交络Confounding, complete 完全交络Confounding, partial 部份交络Connector 连接器Consignment 委托,寄售Consistency 一致性Constancy 恒久性Constancy of great numbers 大数恒久性Constant 常数Constant cause system 恒常原因系统Constant error 恒常误差Constant failure period 恒常失效期Constant failure rate dustribution 恒常失效率分配(布)Constant weight (Fixed weight) 固定权数Constraint 束缚Consultant 管理顾问师Consumer 消费者Consumer acceptance specification 消费者允收规格Consumerism 消费者主义Consumer's risk (CR) 消费者冒险率Consumer test panel 消费者试验小组Consumer preference 消费者偏好Consumer sensitivity test 消费者感官试验Contingency 列联Contingency coefficient 列联系数Contingency table 列联表Contingency theorem 列联理论Continuity correction 连续校正Continuous change 连续变更Continuous data 连续数据Continuous distribution 连续分配(布)Continuous production 连续生产Continuous sampling 连续抽样Continuous sampling plan (CSP) 连续抽样计划Continuous series 连续数列Continuous variable 连续变量Contract 合约Contract preparation 拟定合约Contract review 合约检讨Contract requirements 合约需求Contract requirements analysis 合约需求分析Contractors 合约商Contrast analysis 对照分析Control, in 在管制(状态)下Control, lack of 缺乏管制Control, out of 超出管制Control, state of 管制状态Control, under 在管制(状态)下Control chart 管制图Control chart, cumulative sum 累积和管制图Control chart, defects per unit 每单位内缺点数管制图Control chart, two-way 双向管制图Control chart factor 管制图系数Control chart for attribute 计数值管制图Control chart for variable (measurement) 计量值管制图Control chart method 管制图法Control chart pattern 管制图类型Control factor 管制因素Control gaging (gauging) 管制规测Control level 管制水平Control limit 管制界限Control limit, lower 管制下限Control limit, modified 修正管制界限Control limit, upper 管制上限Control limit factor 管制界限因子Control line 管制线Control of measuring and test equipment 量测与试验设备之管制Control of nonconforming material 不合格物料之管制Control of nonconforming product 不合格产品之管制Control of production 生产管制Control of reliability 可靠度管制Control of verification status 验证状况之管制Control plan 管制计划Control point 管制点Control station 管制站Control system 管制系统Controllability 可管制性Controlled process 管制制程Controlled state 管制状态Controlled variability 管制变异性Controlled variable 管制变数Controlling item 管制项目Convenience lot 合宜的批Convergence 收敛Cooked distribution 中断分配(布)Coordinate 坐标Coordinate axis 坐标轴Coordinate line 坐标线Coordination 协调Coordination for reliability 可靠度协调Correction 校正,修正Correction, Sheppard Sheppard 校正数Correction factor 修正因子Correction for continuity 连续校正Correction for mean 平均数校正Correction term 校正项Corrective action 矫正行动,改正措施Corrective maintenance 矫正维护,改正维护Corrective maintenance time 矫正维护时间,改正维护时间Corrective sorting 修正选别Correlated measure 相关量数Correlated samples 相关样本Correlation 相关Correlation, coefficient of 相关系数Correlation, direct 直接相关Correlation, index of 相关指数Correlation, inverse 反相关Correlation, multiple 复相关Correlation, negative 负相关Correlation, net 净相关Correlation, nonlinear 非线性相关Correlation, nonsense 无意义相关Correlation, part 部份相关,偏相关Correlation, partial 部份相关,偏相关Correlation, perfect 完全相关Correlation, rank 等级相关Correlation, serial 数序相关Correlation, simple 简相关Correlation, zero 零相关Correlation analysis 相关分析Correlation chart 相关图Correlation, coefficient 相关系数Correlation coefficient, rank 等级相关系数Correlation matrix 相关矩阵Correlation of attributes 品性相关Correlation ratio 相关比Correlation of x on y x与y的相关比Correlation ratio of y on x y与x的相关比Correlation scatter chart 相关散布图Correlation surface 相关面Correlation table 相关表Correlation theory 相关理论Correlogram 相关图Corrosive atmosphere 腐蚀性空气Cost 成本,费用Cost, acquisition 取得成本Cost, appraisal 评估(鉴定)成本Cost, external failure 外部失败成本Cost, internal failure 内部失败成本Cost, life cycle 寿命周期成本Cost, logistic 后续成本Cost, prevention 预防成本Cost, quality 质量成本Cost, quality control 质量管理成本Cost, rework 重加工成本Cost effectiveness 成本效益Cost function 成本机能Cost model for reliability optimization 可靠度最佳化成本模式Cost reduction 成本减低Count (Countable) data 点计数据Counter variation 反行变异Co-variation 共变异Covariance 共变异数,共变数Covariance analysis 共变异数分析Covariance matrix 共变异矩阵Craps, game of 掷骰游戏Credibility 信用Creep failure 潜变失效,潜变故障Crest 峰Criteria for workmanship 工作技艺准则Criterion 准则,规范Criterion, acceptance 验收准则(规范)Critical component control 重要组件管制Critical defect 严重缺点Critical defective 严重不良品Critical design review 关键设计审查Critical failure 关键故障,严重失效Critical items 关键品目,重要件Critical path 要径Critical path analysis 要径分析法Critical region 临界区域,弃却区域,判定区Critical value 临界值,判定值Criticality 严重性,关键性Cross 交叉Cross check 互校Cross classification 交叉分类Cross correlation 交叉相关Cross formula 交互公式Cross-hatch 交叉线Cross-hatched map 交叉图Cross-over design 交叉计划Crossed design 交叉法Crude mode 概括众数Crude moment 概括动差Cubic chart (diagram) 立方图Culled 检选Cumulant 累积数Cumulation, downward 向下累积Cumulation, total 全部累积Cumulation, upward 向上累积Cumulation average chart 累积平均数(管制)图Cumulative curve 累积曲线Cumulative curve chart 累积曲线图Cumulative damage 累积损坏Cumulative distribution (Ogive) 累积分配(布)Cumulative distribution function 累积分配(布)函数Cumulative error 累积误差Cumulative failure frequency 累积故障次数,累积失效次数Cumulative frequency 累积次数Cumulative frequency arrangement 累积次数排列Cumulative frequency curve 累积次数曲线Cumulative frequency 累积次数曲线图Cumulative frequency distribution 累积次数分配(布)Cumulative frequency polygon 累积(次数)多边形Cumulative frequency (probability) function 累积次数(机率)函数Cumulative frequency table 累积次数表Cumulative function 累积函数Cumulative graph 累积图Cumulative hazard function 累积冒险函数Cumulative mean 累积平均数Cumulative normal distribution 累积常态分配Cumulative number of failures 累积失效数,累积故障数Cumulative percentage of failures 累积失效百分率,累积故障百分率Cumulative probability distribution 累积机率分配(布)Cumulative sum 累积和Cumulative sum chart 累积和(管制)图Cumulative sum control chart 累积和管制图Cumulative terms 累积项Curtailed (Truncated) inspection 截略检验Curtailed (Truncated) sample inspection截略样品检验Curtailed sampling 截略抽样Curtailed sampling inspection 截略抽样检验Curtaijed sampling plan 截略抽样计划Curtailment of sampling plan 抽样计划之截略Curve 曲线Curve, frequency 次数曲线Curve, normal 常态曲线Curve chart (diagram) 曲线图Curve fitting 曲线配合Curve of error 误差曲线Curve of means 平均数曲线Curve of probability 机率曲线Curve type criterion 曲线型准则Curve shape 曲线形状Curvilinear correlation 曲线相关Curvilinear regression 曲线回归Curvilinear trend 曲线趋势Curvilinearity 曲线性Customer 客户,顾客Customer complaint 顾客抱怨Customer feedback information 顾客回馈信息Customer incurred cost 顾客引发成本Customer operation cost 顾客作业成本Customer repair cost 顾客修理成本Customer requirement 顾客要求Customer satisfaction 顾客满意度Customer's need 顾客需要Cusum chart 累积和(管制)图Cycles 周期Cycles between failures 失效间隔周期,故障间隔周期Cycle of operation 操作周期Cyclic curve 周期(循环)曲线Cyclic damage 周期性损坏Cyclic load 周期性负荷Cyclical deviation 周期(循环)离差Cyclical fluctuation 周期波动Cyclical trend 周期趋势Cyclical movement 周期移动Cyclical variation 周期变异Cycling failure rate 周期性失效率,周期性故障率DD chart d管制图Data 数据Data analysis 数据分析Data bank 资料室(库)Data exchange program 数据交换计划Data, inspection 检验数据Data item 数据项,文件项目Data processing 数据处理Death rate 死亡率Debug (debugging) 除错Decile 十分位数Decimal fraction 小数Decision function 决策函数Decision line 决定线Decision making 决策Decision variable 决策变数Decreasing failure rate distribution 递减失效率分配(布)Decrement 减量Decrement rate 减率Defect 疵病,缺点Defect, chronic 慢性缺点Defect, critical 严重缺点Defect, incidental 偶发缺点Defect, major 主要缺点Defect, minor 次要缺点Defect, sporadic 突发缺点Defect and failure analysis 缺点与失效分析Defect chart 缺点数(管制)图Defect Free 零缺点Defect prevention 缺点预防Defects, number of 缺点数Defects classification 缺点分类Defects per hundred units (dphu) 百件缺点数Defects per unit chart 每单位(内)缺点数(管制)图Defects per unit plan 每单位(内)缺点数(管制)计划Defective 不良品Defective, fraction 不良率Defective chart 不良品数(管制)图Defective material 不良材料Defective number 不良品数Defective part 不良零件Defective parts, percentage of 不良零件百分率Defective prevention 不良品预防Defective unit 不良品(单位)Defectives, number of 不良(品)数Defectives classification 不良品分类Definition(s) 定义Deflated series 调节数列Deflated value 调节值Deflating index 调节指数Degradation 劣化Degradation failure 劣化故障,劣化失效Degree of accuracy 准确度Degree of approximation 近似度Degree of association 相联度Degree of confidence 信任(赖)度Degree of contribution 贡献度Degree of freedom (DF) 自由度Degree of reliability 可靠度Delivery 交货,出厂Delivery inspection 出厂检验Delivery qulaity 出厂品质Delivery time 运送时间Demerit 减点Demerit chart 减点(数)(管制)图Demerit rating 减点评比Demerits per unit 每单位(内)减点数Demonstration 示范,验证,展现Demonstration test 验证试验,展现试验Density function 密度函数Dependability 可恃性,相依性,依赖性Dependent factor 因变因子Dependent failure 相依失效,相依故障Dependent variable 因变数Derating 降等,额降,减额定Derivation 导出Derived table 导出表Descriptive item 说明项Descriptive statistics 记述统计(学)Design 设计Design baseline 设计准则Design change 设计变更Design considerations 设计考虑Design control 设计管制Design change control 设计变更管制Design control, new 新设计管制Design criterion 设计准则Design disclosure package 设计启导文件Design effect cost 设计效应成本Design freeze 设计冻结Design in 设计进去Design input 设计输入Design matrix 设计矩阵Design output 设计输出Design of experiment 实验计划Design planning 设计规画Design profile 设计轮廓Design proving 设计认可Design qualification 设计之合格性Design release 设计发布Design requalification 设计合格之再认定Design review 设计审查Design specification 设计规格Design validation 设计确认Design verification 设计验证,查证Design verification test 设计验证试验Designation 名称Designed experiment 实验计划Destructive inspection (test) 破坏性检验(试验)Detailed design 细部设计Detailed design review 细部设计审查Detailed inspection (100% inspection) 全数检验(百分之百检验)Detect 侦测Detection of a failure unit 失效单位之检测,故障单位之检测Detection time 检测时间Deterioration 衰变,劣化Determination, coefficient of 定限系数Development 发展Development test 发展试验Deviation 离差Deviation, average 平均差Deviation, mean 平均差Deviation, root-mean-square 均方根差Deviation, sample standard 样本标准差Deviation, standard 标准差Deviation, universe standard 群体标准差Deviation permit 差异特许Deviation report 差异报告Diagnosis 诊断Diagnostic arm 诊断能力Diagonal distribution 对角分配(布)Diagram, bar 条(形)图Diagram, curve 曲线图Diagram, scatter 散布图Diagrammatic presentation (Graphic presentation) 图示Dice experiment 掷骰实验Dichotomy 二分法Dichotomy, double 双次二分法Dictogram 实体图Difference, significance of 差异之显著性Difference control chart 差异管制图Difference correlation 差异相关Difference method, t-test 差异之t检定Differential effect 差别效果Digit 数字。
中英文单词对照表
一、品质专业词汇Quality Professional GlossaryQC Quality Control (品质管控)IQC Incoming Quality Control (进料品质管控)IPQC In process Quality Control (制程品质管控)FQC Final Quality Control (终点品质管控)OQC Output Quality Control (最终出货品质管控)QA Quality Assurance (质量保证)TQC Total Quality Control (全面质量管理)FAA First Article Assurance (首件确认)POC Passage Quality Control (段检)OQA Output Quality Assurance (出货质量保证)QE Quality engineering (品质工程)QI Quality Improvement (品质改善)ACC Accept (允收) REE Reject (拒收)AOD Accept On Deviation (特采)CR Critical (极严重的)MAJ Major (主要的)MIN Minor (轻微的)AQL Acceptable Quality Level (品质允收水准)S/S Sample size (抽样检验样本大小)CAR Corrective Action Request (矫正措施要求)C/R Corrective Action (矫正措施)ECN Engineering Change Notes (工程变更通知)(供应商)ECO Engineering Change Order (工程改动要求)(客户)PCN Process Change Notice (工序改动通知)PMP Product Management Plan (生产管制计划)SIP Specification In Process (制程检验规格)SOP Standard Operation Procedure (制造作业规范)IS Inspection Specification (成品检验规范)BOM Bill Of Material (物料清单)PS Package Specification (包装规范)SPEC Specification (规格)CCC China Compulsory Certificate(中国强制认证)QCC Quality Control Circle (品管圈)QIT Quality Improvement Team (品质改善小组)QP Quality Policy (质量方针)QT Quality Target (质量目标)OK OK (好,合格)NG Not Good (不行,不合格)Lot (批) Lot Size (批量)Sample(样本) Sampling(抽样)Defect (缺陷)Inspection(检验)PDCA Plan Do Check Action (计划执行检查总结)5W1H When Where Who What Why How (何时何地何人何事为何怎么做)4M1E Man Machine Material Method Environment (人机器物料方法环境)二、产品词汇Production GlossaryUPS Uninterruptible Power Supply (不间断电源)EPS Emergency Power supply (应急电源)Low Frequency Online UPS (低频在线UPS\工频在线UPS)High Frequency Online UPS (高频在线UPS)On-line UPS (在线UPS)Off ine UPS(离线UPS)Back-up UPS (后备UPS)Line Interactive UPS (在线互动UPS)Electric Power UPS(电力UPS)Home UPS(家用UPS)Inverter (逆变器)Frequency Converter(变频器)AC Stabilized Power Supply (交流稳压电源)DC Power Supply (直流电源)三、电气专用词汇Electric Professional GlossaryInput Voltage (输入电压) Output Voltage (输出电压) Rated Voltage (额定电压) Input Current (输入电流) Output Current (输出电流) Rated Current (额定电流) Input Frequency (输入频率) Output Frequency (输出频率) Rated Frequency (额定功率) Input Power (输入功率) Output Power (输出功率) Rated Power (额定功率) Manual Bypass (手动旁路) Maintenance Bypass (维修旁路)Transform Time (转换时间) Waveform Distortion (波形失真)Phase (相数) Phase Sequence (相序)Single Phase (单相) Three Phase (三相)Efficiency (效率) Load (负载)Temperature (温度) Humidity (湿度)Normal (正常) Abnormal (不正常)Waveform (波形) Sine Wave (正弦波)Square Waveform (方波) Modified Sine Wave (修正正弦波)MIN Minimum (最小值)MAX Maximum (最大值)MIN Power (最小功率) MAX Power (最大功率)Protection (保护) Fault/Failure (故障)Reset (复位) Test (测试)Startup (启动) Shutdown (关闭)Alarm (报警) Silence (静音)Overload Protection (过载保护)Short Circuit Protection (短路保护)Over Temperature Protection (过温保护)Battery Low Voltage Protection (电池低压保护)Rated Battery Voltage (额定电池电压)Charge Voltage (充电电压)Float Voltage (浮充电压)Cycle Voltage (均充电压)Charge Current (充电电流)Isolation Resistance (绝缘电阻)Isolation Intensity (绝缘强度)Grounding Resistance (接地电阻)Leakage current to ground (对地泄漏电流)PF Power Factor (功率因数)CF Crest Factor (峰值因数)AVR Automatic Voltage regulate (自动稳压)EPO Emergency Process Operation (紧急操作程序)REC Rectifier (整流器) BYP Bypass (旁路) BAT Battery (电池)L line (火线) N neutral (零线/中线) G Ground (地 )SNMP Simple Network Management Protocol (简单网络管理协议)USB Universal Serial Bus (通用串行总线架构)SMT surface mount technology (贴片技术)AI Auto-Insertion (自动插件)四、产品包装箱和丝印词汇 Production Packaging-Box And Silk-Screen Glossary Model (型号) Specification (规格)Series (系列)Dimension (尺寸)Quantity (数量) Capacity (容量)Weight (重量) Shipping Weight (运输重量)Net Weight (净重) Gross Weight (毛重)L Length (长度) W Width (宽度)H High (高度) D Depth (深度)Color<英> Colour<美> (颜色)Grey (灰色) Red (红色)Black (黑色) White (白色)Yellow (黄色) Silver (银色)Blue (蓝色) Green (绿色)S/N Serial Number (序列号)TEL Telephone (电话)Modem (调制解调器) FAX (传真)Caution/Warning (警告) Notice (注意)Port (端口) Slot (槽)Parallel Port (并机端口)Communication Port (通讯端口)Intelligent Port (智能端口)Single Mode (单机模式)Parallel Mode (并机模式)五、电子物料词汇 Electron Materiel GlossaryTransformer (变压器) Relay (继电器)Transistor (晶体管) Resistance (电阻)Capacitance (电容) Inductance (电感)Diode (二极管) Audion (三极管)Fuse (保险丝) Buzzer (蜂鸣器)Socket (插座) Plug (插头)Filter (滤波器) Fan (风扇)Circuit Breaker (断路器)Crystal Oscillator (晶振)Touch Screen (触摸屏)LCD Liquid crystal Display (液晶显示屏)LED Light-emitting Diode (发光二极管)MOSFET Metallic Oxide Semiconductor Field Effect Transistor(金属氧化物半导体场效应晶体管)IGBT Isolated Gate Bipolar Transistor (绝缘双极性晶体管)SCR Silicon Control Rectifier (可控硅)STS Static Transform Switch (静态转换开关)六、其他语言词汇 Other Language Glossary中文英文法文德文西班牙文灰色 gray gris grau gris白色white blanc weiß blanco红色 red rouge rot rojo蓝色 blue bleu blau azul绿色green vert grün verde黑色 black noir Schwarz negro橙色 orange orange orange naranja黄色yellow jaune gelb amarillo。
最新质量质检英语词汇
质量质检英语词汇质量质检英语词汇AQL: acceptable quality level 可接收质量水平audit programme 审核方案audit criteria 审核准则audit evidence 审核证据audit finding 审核发现audit conclusion 审核结论audit client 审核委托方auditor 审核员audit team 审核小组APQP:Advanced Product Quality Planning 产品质量计划(APQP)ABC :Activity-Based Costing 作业制成本制度Action 行动Activity 活动Accumulation 累积Accuracy 准确度Adjusted value 校正值Admissible error 容许误差Analysis of correlation 相关分析 Analysis of regression回归分析Analysis of variance 方差分析ANOVA (analysis of variance)方差分析Approved 承认Attribute计数值Arithmetic mean 算术平均数Asymmetric distribution 非对称分布Attribution 属性Autocorrelation 自相关Average 平均数Affinity diagram 亲和图BTF: Build To Forecast 计划生产 BTO :Build To Order 订单生产 Balance sheet资产负债对照表Brainstorming Techniques脑力风暴法Binomial 二项分配Benchmarking水平对比法Control chart 管制图capability 能力CS: Customer Satisfaction 顾客满意度CS: customer service 客(户)服(务)(中心)CSI:Customer Satisfaction Index 顾客满意度指数CPI: continuous process improvement 连续工序改善continual improvement 持续改进 customer satisfaction 顾客满意characteristic特性conformity 合格nonconformity 不合格corrective action 纠正措施concession 让步competence能力Cause-and-effect relationship 因果关系Cause and Effect Matrix因果图.鱼骨图Cell 单元Central value 中心值Chance 机遇 Chance error 随机误差Chance variable 随机变量CL: Center Line中心线Check Sheets检查表Class interval 组距Code 代码Coded data 编码数据Column 列Correctness 正确性Correspondence 对应Counting 计数Critical value 临界值Cycle 周期Complaint 投诉Correction 纠正Correlation Methods 相关分析法 Cross Tabulation Tables 交叉表DCC: document control center 文控中心DOE: design of experiment 实验设计DPM :Defects per million 每百万单位的缺点数Defects per unit 单位缺点数DFSS :Design for six sigma六个西格玛设计DVT :Design Verification Testing 设计验证defect 缺陷Data数据Data acquisition 资料收集Data bank 数据库Data capacity 数据容量Data handling 数据处理Data processing 数据处理Data-in 数据输入Data-out 数据输出Decision决策、判定Description描述Device装置Do执行Degree of reliability 可靠性程度Depth 深度 Design 设计Effectiveness 有效性Efficiency效率ERP:Enterprise Resources Plan 企业资源计划(规划)EC : Engineer Change 设计变更/工程变更EC :Electronic Commerce 电子商务EMC :Electric Magnetic Capability 电磁相容Environmental环境Equipment设备EV: Equipment Variation设备变异 External Failure外部失效,外部缺陷Element 元素Engineering technology 工程技术 Estimated accumulative frequency 计算估计累计数EV: Equipment Variation 设备变异 FA: Failure Analysis失效分析FQC: final quality control 最终质量控制(成品质量管理)Final/Finished Quality Control(FQC) 最终/成品检验FQA: final quality assurance 最终质量保证FMEA: failure mode and effects analysis 潜在缺陷模式和影响分析(故障型态与效应分析)FMA: failure mode analysis 故障模式分析FEA: failure effect analysis 故障效应分析FCA: failure criticality analysis故障危害度分析Fatigue疲劳Failure rate故障率Fact control 事实管理FPY: First-Pass Yield (第一次通过)合格率Gage R & R : Gage repeatability & reproducibility量规重复能力与重制能力 Gauge system测量系统Grade等级Histogram直方图IQC: incoming quality control 进货检验IE: industrial engineering 工业工程 IPQC: In-Process Quality Control 制程品质控制IQC : Incoming Quality Control 进料质量管理ISO : International Organization for Standardization 国际标准组织ISAR: Initial Sample Approval Request 首批样品认可Initial review先期审查Internal Failure内部失效、内部缺陷infrastructure 基础设施information 信息inspection 检验Improvement 改善LQC: line quality control 生产线质量控制LSL : Lower Specification Limit 规格下限LCL: Lower control limit管制下限 MRP:Material Requirements Planning 物料需求计划(规划)MO : Manufacture Order 制令MPS : Master Production Schedule 主生产排程MRO :Maintenance Repair Operation 请修单MRPII:Manufacturing Resource Planning 制造资源计划MSA: Measurement System Analysis测量系统分析Machine机械Manage管理Materials物料Measurement测量Median中位数measurement control system 测量控制系统 measuring equipment 测量设备matrix chart矩阵图Normal distribution常态分配network网络图OEM: Original Equipment Manufacture 委托加工ODM : Original Design & Manufacture 委托设计与制造OQC : Out-going Quality Control 出货质量管理(出货检验)organizational structure 组织结构 Occurrence发生率Operation Instruction作业指导书 Organization组织PQC: process quality control 过程质量控制PQA: Process Quality Assurance制程品质保证PDCA: plan do check action 计划执行检查矫正PO : Purchase Order 订单Parto柏拉图PPM: Parts per Million百万分之(不良率)Plan计划Policy方针Prevention预防Probability机率Probability density function 机率密度函数Procedure流程Process过程Process capability analysis制程能力分析(图)Process control and Process capability制程管制与制程能力Product产品Production生产Projects项目procedure程序preventive action 预防措施Population 群体Practice 实务(践)PDPC过程决策程序图QCC: quality control circle 品管圈 QA: quality assurance 质量保证QC: quality control 质量控制QE: quality engineering 质量工程 QMS: quality management system 质量管理体系QFD : Quality function deployment 质量机能展开Quality Gate通常翻译成质量门、质量阀,就是在达到下一道工序前,本工序的产品必须严格达到特定的品质标准Quality 质量Quality manual 品质手册Quality policy 品质政策(质量方针) Random experiment 随机试验Random numbers 随机数R: Range 全距(极差)Reject 拒收Repair 返修Repeatability 再现性Reproducibility 再生性Requirement 要求Responsibilities 职责Review 评审Rework返工Rolled yield 直通率RPN: Risk Priority Number 风险系数Sample 抽样,样本Sample space 样本空间Sampling with replacement 放回抽样Sampling without replacement 不放回抽样Scatter diagram 散布图分析Scrap 报废Simple random sampling 简单随机取样Size 规格SL: Size Line 规格中心线Stratified random sampling 分层随机抽样SOP: Standard Operation Procedure 标准作业书SPC: Statistical Process Control 统计制程管制 Specification 规范SQA: Source(Supplier) Quality Assurance 供货商品质保证Stage sampling 分段随机抽样Standard Deviation 标准差Sum of squares 平方和Taguchi-method 田口(试验)方法Theory 原理TQC: Total Quality Control 全面品质控制TQM: Total Quality Management 全面品质管理Traceability 追溯Training 培训Tree diagram树图UCL: Upper Control Limit 管制(控制)上限USL: Upper Size Limit 规格上限 Validation ,确认Variable ,计量值Verification ,验证Version ,版本VOC: Voice of Customer ,客户需求VOE: Voice of Engineer ,工程需求Vague concept, 模糊概念Validity, 有效性VARCOMP (Variance component estimation), 方差元素估计Variability, 变异性Variable, 变量Variance, 方差Variation, 变异Varimax orthogonal rotation, 方差最大正交旋转Volume of distribution, 容积W test, W检验Weibull distribution, 威布尔分布 Weight, 权数Weighted Chi-square test, 加权卡方检验/Cochran检验Weighted linear regression method, 加权直线回归Weighted mean, 加权平均数 Weighted mean square, 加权平均方差Weighted sum of square, 加权平方和Weighting coefficient, 权重系数Weighting method, 加权法W-estimation, W估计量W-estimation of location, 位置W估计量Width, 宽度Wilcoxon paired test, 威斯康星配对法/配对符号秩和检验Wild point, 野点/狂点Wild value, 野值/狂值Winsorized mean, 缩尾均值Withdraw, 失访Youden’s index, 尤登指数Z test, Z检验Zero correlation, 零相关Z-transformation, Z变质量一致性检验 inspecton of quality conformity仲裁性质质量监督 quality supervision for arbitration产品保护 product protection产品定型 product approval产品分等 product classificatin产品规范 product specification产品设计 product design产品质量 product quality产品合格率 product percent of pass产品系列化 product seriation产品管理标准 product management standard产品计量单位 unit of measurement of product产品售后服务 after service产品质量标志 product quality mark产品质量标准 product quality standard 产品质量管理 product quality management产品质量检验 product quality inspection产品质量监督检验 product quality supervision and inspection产品质量认证标志 certification marking of product quality 产品质量认证程序 certification procedure of product quality产品质量认证制度 certification system of product quality认证 certification立法 legislation自行认证 self-certification认可 accreditation安全认证 safety certification安全认证标志 mark of safety certification强制性认证 compulsory certificate实验室鉴定 laboratory qualification实验室认证 laboratory certification自愿认证制 voluntary system of certification法规机构 regulatory authorities认证活动 certification activity认证体系 certification system认证计划 certification scheme认证机构 certification body检验机构 inspecton body许可证 licence申请人 applicant许可证持有者 licensee合格证书 certificate of conformity合格标记 mark of conformity认证体系的利用 access to certification system认证体系的参与者 participant in certification system认证体系的成员 member of certification system批准 approval型式批准 type approval测试实验室的认可 accreditation of testing laboratory认可 accreditation认可体系 accreditation system认可机构 accreditation body认可的实验室 accredited laboratory认可准则 acreditatin criteria实验室评定 laboratory assessment实验室评定者 laboratory assessor认可的实验室的试验报告 accredited laboratory test report批准签署人 approved signatory承认和批准协议 recognition and approval arrangement 承认协议 recognition arrangement单边协议 unilateral arrangement双边协议 bilateral arrangement多边协议 multilateral arrangemetn互利 reciprocity平等待遇 equal treatmetn国家待遇 national treatment国家和平等待遇 national and equal treatment合格及有关的通用概念 conformity and related general concept合格 conformity合格测试 conformity testing合格 acceptable合格品 acceptable part合格标志 mark of conformity合格认证 conformity certification合格认证标志 mark of conformity certification合格品标志 mark of acceptable product 合格证书 certificate of conformity合格证检查 inspection by certificate合格质量检查 acceptable quality level 评定合格 assessment of conformity合格评定 conformity assessment型式评价 type evaluation合格监督 conformity surveillance 合格证明 verification of conformity 合格保证 assurance of conformity 供货商声明 supplier's declaration 生产许可证 production licence一致 consensus检验 inspection不定期检验 nonperiodic inspection 抽样检验 sampling inspection出厂检验 exfactory inspection第一方检验 first party inspection 第二方检验 second party inspection 第三方检验 third party inspection 第三方认证制度 third pary certification定期检验 periodic inspection交收检验 acceptance inspeciton例行检验 routine inspeciton生产检验 produciton inspeciton生产定型检验 production approval inspeciton 验收检验 acceptance inspeciton验证检验 compliance test仲裁检验 arbitration inspection制造商担保 guarantee by manufacturer 百分比抽样检查 percent sampling inspection不合格判定数 rejection number不合格质量水平 rejecton quality level 抽查型质量监督 sampling quality supervision环境监测 environmental monitoring抽样 sampling多次抽样 multiple sampling分层抽样 stratified sampling分层随机抽样 stratified random smapling多级抽样 multistage sampling二次抽样 double sampling试件 test piece试验报告 test report试样 test sample测试设备 testing equipment测试试验室 testing laboratority商标 trademark商品名称 trade-name测试 testing试验 test实验室间的试验比较 interlaboratory test comparisons熟练水平试验 proficiency testing次品 defective product代用产品 substitute product定量试验 quantitative test出口管理 export control出口许可证制度 export control进口许可证制度 import licence system 定额管理 quota management非关税壁垒 non-tarrif barrier关税壁垒 tariff barrier关税普遍优惠制 general preferential duties。
英汉质量词汇
fluidization quality
流态化质量
forging quality
可锻性
forging qualHale Waihona Puke ty steel锻造用钢胚
form quality
成形性
fuel antiknock quality
燃料抗爆性
fuel ignition quality
燃料着火性
fulfillquality requirements
艺术性
automobile dynamic quality
汽车动力性能
average shipped and landed quality terms
运输和到岸平均品质条款
average outgoing quality
平均出厂质量
average outgoing quality curve (AOQC)
照片质量
photometric quality
光度质量
physical quality
身体素质
picture color quality
图像彩色质量
picture quality
评价水质
evaluation of imaging quality
成像质量评价
expected quality level
预期质量水准
extra good quality
超级优质
extra quality
特优质量
extrusion quality
挤压性
factor of quality
质量因子
fair average quality
冷弯钢
cold-rolled drawing quality sheet
质量管理体系词汇中英文对照表
质量管理体系词汇中英文对照表Aacceptance 接收action 措施active medical device 有源医疗器械active implantable medical device 有源植入性医疗器械adequacy 充分性adjust 调整, re-adjust 重新调整adverse effect 不利影响advisory notice 忠告性通知agent 代理商analysis 分析analysis of data 数据分析applicable 适用的application 应用approval 批准approved 被批准associated utility 相关设施auditor 内审员authority 权限awareness 意识Bbatch 批次Ccalibration 校准calibration status 校准状态cause 条款change 更改characteristic 特性cleanliness 清洁clinical evaluation 临床评价clothing 服装commitment 义务communication 沟通concession 让步confidential information 保密信息conformity 合格consistent 持续的consistent with 与...相一致contamination 污染contract 合同control of nonconforming product 不合格品的控制control of record 记录控制control of document 文件控制corrective action 纠正措施corrective and preventive action 纠正预防措施criteria 准则criteria for selection 选择的准则criteria for product acceptance 产品的接收准则customer complaint 顾客抱怨customer communication 顾客沟通customer focus 以顾客为关注焦点customer feedback 顾客反馈customer property 顾客财产customer-related process 与顾客有关的过程customer requirement 顾客要求Ddamage 损坏deficiency 不足define 定义defined requirement 规定的要求delivery 交付design and development 设计和开发design and development change 设计和开发更改design and development input 设计和开发的输入design and development output 设计和开发的输出design and development planning 设计和开发的策划design and development review 设计和开发的评审design and development verification 设计和开发的验证design and development validation 设计和开发的确认design transfer 设计转换deterioration 损坏distributor 经销商document 文件documentation 文件documented procedure 程序文件documentation requirement 文件要求Eeffectiveness 有效性efficiency 效率eliminate 消除enquiry 咨询ensure 确保esponsibility 职责evaluate 评价evaluation of performance 性能评价evidence 证据experience 经验extent 程度Ffeedback system 反馈系统file 文档final product 最终产品framework 框架frequency 频率function 功能functional requirement 功能要求Ggeneral requirement 总要求Hhandling 搬运hardware 硬件health 健康human resource 人力资源Iidentification 标记identification and traceability 标识和可追溯性impartiality 公正性implantable medical device 植入性医疗器械implementation 实施improvement 改进infrastructure 基础设施input 输入inspection 检验installation process 安装过程installation activitie 安装活动intended use 预期用途internal audit 内审internal communication 内部沟通interrelation 相互关系interested party 相关方invalidate 使失效issue 发布Llabelling 标识lifetime of the medical device 器械的寿命lost 丢失Mmaintenance 维护management system 管理体系management review 管理评审management representative 管理者代表manufacturing process 生产过程measurement 测量medical device 医疗器械monitoring 监视monitoring and measurement 监视和测量monitoring and measuring device 监视和测量装置Nnational or regional regulation 国家或地区标准nonconformity 不合格Oobjectivity 客观性order 订单organization structure 组织结构output 输出Ppackage 包装packaging 包装particular requirement 特殊要求performance 性能performance requirement 性能要求personnel 人员planning of product realization 产品实现的策划post-delivery 交付后post-production stage 生产后阶段preservation of product 产品防护preventive action 预防措施preventive and corrective actions 纠正预防措施procedure 程序process过程process performance 过程业绩product 产品product acceptance criteria 产品接收准则product conformity 产品的符合性product information 产品信息production provision 产品的提供product requirement 产品要求product release 产品放行product realization 产品的实现product specification 产品规范project 项目protection 防护provision of resource 资源提供purchasing 采购Qquality 质量quality assurance 质量保证quality control 质量控制quality improvement 质量改进quality management 质量管理quality management system 质量管理体系quality manual 质量手册quality objective 质量目标quality planning 质量计划quality policy 质量方针qualification of personnel 人员资格Rre-adjuste 重新调整recommendation for improvement 改进的建议reconfirm 重新确认record 记录re-evaluation 重新评价reference 参考reference material 参考材料reference measurement procedure 参考测量材料regulatory requirement 法规要求release 放行reporting adverse event 不良事件报告requirement 要求resource 资源resource management 资源管理resource needs 资源的需求results of audit 审核结果revalidation 重新确认review 评审review input 评审输入review output 评审输出rework 返工risk management 风险管理Ssafety 安全safety requirement 安全要求satisfy 满足scope 范围servicing activitie 服务活动servicing process 服务过程service provision 服务的提供skill 技能software 软件special environmental condition 特殊环境条件special storage condition 特殊的贮存条件specialist personnel 专家specified application 规定的要求statistical technique 统计技术status identification 状态标识statutory requirement 法律要求sterile medical device 无菌医疗器械sterilization 灭菌storage 贮存suitability 适宜性supporting service 支持性服务system 体系Ttask 工作temporarily 临时地tender 标书test 试验top management 最高管理者traceability可追溯性training 培训type or model 类型或型号Uunintended use 非预期用途update 更新Vvalidation 确认verification 验证Wwarning 报警work environment 工作环境work instruction 作业指导书workspace 工作场所。
质量英文词汇
1.PDCA:Plan、 Do、Check、Action 策划、实施、检查、处置2.PPAP:Production PartApproval Process 生产件批准程序3.APQP:Advanced ProductQuality Planning 产品质量先期策划4.FMEA:Potential FailureMode and Effects Analysis 潜在失效模式及后果分析5.SPC:Statistical ProcessControl 统计过程控制6.MSA:Measurement SystemAnalysis 测量系统控制7.CP:Control Plan 控制计划8.QSA:Quality SystemAssessment 质量体系评定9.PPM:Parts Per Million 每百万零件不合格数10.QM:Quality Manua 质量手册11.QP:Quality Procedure 质量程叙文件/Quality Planning 质量策划/Quality Plan 质量计划12.CMK :机器能力指数13.CPK :过程能力指数14.CAD:Computer-AidedDesign 计算机辅助能力设计15.OEE:Overall Equipment Effectiveness 设备总效率16.QFD:Quality FunctionDeployment 质量功能展开17.FIFO:First in, First out 先进先出18.COPS:Customer OrientedProcesses 顾客导向过程19.TCQ:Time、Cost、Quality 时间、成本、质量20.MPS:Management Processes 管理性过程21.SPS:Support Processes 支持性过程22.TQM:Total QualityManagement 全面质量管理23.PQA:Product QualityAssurance 产品质量保证(免检)24.QP-QC-QI :质量三步曲,质量计划-质量控制-质量改进25.QAF:Quality AssuranceFile 质量保证文件26.QAP:Quality AssurancePlan 质量保证计划27.PFC:Process Flow Chart 过程流程图28.QMS:Quality ManagementSystems 质量管理体系29.JIT:Just In Time 准时(交货)30.ERP:EnterpriseRequirement Planning 企业需求计划31.QC:Quality Control 质量控制32.QA:Quality Audit 质量审核/QalityAssurance 质量保证33.IQC:In Come QualityControl 进货质量控制34.IPQC:In Process QualityControl 过程质量控制35.FQC:Final QualityControl 成品质量控制36.OQC:Out Quality Control 出货质量控制37.4M1E:Man、 Machine、 Material、 Method、 Environment 人、机、料、法、环38.5W1H:Why、What、Who、When、Where、 How 为何/做什么/谁做/时间/地点/如何做39.6S:Seiri、Seiton、Seiso、Seiketsu、Shitsuke、Safety 整理、整顿、清扫、清洁、素质、安全40.TRI 值: Total Record Injury(三种)可记录工伤值41.SMART :精明原则, SpecificMeasurable Achievable Result Oriented Timed(具体的描述、可以测量的、可以通过努力实现的、有结果导向性的、有时间性的)企业常用英文缩写1.5S:5S 管理2.ABC :作业制成本制度(Activity-BasedCosting )3.ABB :实施作业制预算制度(Activity-BasedBudgeting )4.ABM :作业制成本管理(Activity-BaseManagement)5.APS :先进筹画与排程系统(AdvancedPlanning and Scheduling)6.ASP :应用程序服务供货商( ApplicationService Provider)7.ATP :可承诺量(Available ToPromise)8.AVL :认可的供货商清单( ApprovedVendor List)9.BOM :物料清单( Bill OfMaterial )10.BPR :企业流程再造( BusinessProcess Reengineering)11.BSC :平衡记分卡( BalancedScoreCard )12.BTF :计划生产( Build ToForecast)13.BTO :定单生产( Build To Order)14.CPM :要径法( Critical PathMethod )15.CPM :每一百万个使用者会有几次抱怨( Complaintper Million)16.CRM :客户关系管理(CustomerRelationship Management)17.CRP :产能需求规划( CapacityRequirements Planning )18.CTO :客制化生产( ConfigurationTo Order)19.DBR :限制驱导式排程法( Drum-Buffer-Rope)20.DMT :成熟度验证( DesignMaturing Testing )21.DVT :设计验证( DesignVerification Testing )22.DRP :运销资源计划( DistributionResource Planning )23.DSS :决策支持系统( DecisionSupport System )24.EC :设计变更/工程变更( EngineerChange)25.EC :电子商务( ElectronicCommerce)26.ECRN :原件规格更改通知( EngineerChange Request Notice)27.EDI :电子数据交换( ElectronicData Interchange)28.EIS :主管决策系统( ExecutiveInformation System )29.EMC :电磁相容( ElectricMagnetic Capability)30.EOQ :基本经济订购量(EconomicOrder Quantity)31.ERP :企业资源规划( EnterpriseResource Planning )32.FAE :应用工程师( FieldApplication Engineer)33.FCST :预估( Forecast)34.FMS :弹性创造系统( FlexibleManufacture System)35.FQC :成品质量管理( Finish orFinal Quality Control )36.IPQC: 制程质量管理(In-ProcessQuality Control )37.IQC :进料质量管理(IncomingQuality Control )38.ISO :国际标准组织( InternationalOrganization for Standardization)39.ISAR :首批样品认可( InitialSample Approval Request)40.JIT :实时管理( Just In Time)41.KM :知识管理( KnowledgeManagement)42.L4L :逐批订购法( Lot-for-Lot)43.LTC :最小总成本法( Least TotalCost)44.LUC :最小单位成本( Least UnitCost)45.MES :创造执行系统( ManufacturingExecution System)46.MO :制令( Manufacture Order)47.MPS :主生产排程( MasterProduction Schedule)48.MRO :请修(购)单( MaintenanceRepair Operation)49.MRP :物料需求规划( MaterialRequirement Planning )50.MRPII :创造资源计划( ManufacturingResource Planning)51.NFCF :更改预估计的通知 Notice forChanging Forecast52.OEM :委托代工( OriginalEquipment Manufacture)53.ODM :委托设计与创造( OriginalDesign & Manufacture)54.OLAP :在线分析处理( On-LineAnalytical Processing )55.OLTP :在线交易处理( On-LineTransaction Processing)56.OPT :最佳生产技术(OptimizedProduction Technology)57.OQC :出货质量管理(Out-goingQuality Control )58.PDCA:PDCA 管理循环( Plan-Do-Check-Action )59.PDM :产品数据管理系统( ProductData Management)60.PERT :计划评核术( ProgramEvaluation and Review Technique)61.PO :定单( Purchase Order)62.POH :预估在手量( Product onHand )63.PR :采购申请( PurchaseRequest)64.QA :品质保证(QualityAssurance)65.QC :质量管理(Quality Control )66.QCC :品管圈(Quality ControlCircle)67.QE :品质工程(QualityEngineering )68.RCCP :粗略产能规划( Rough CutCapacity Planning )69.RMA :退货验收( ReturnedMaterial Approval )70.ROP :再订购点( Re-Order Point)71.SCM :供应链管理(Supply ChainManagement)72.SFC :现场控制(Shop FloorControl )73.SIS :策略信息系统( StrategicInformation System)74.SO :定单( Sales Order)75.SOR :特殊定单需求( Special OrderRequest)76.SPC :统计制程管制( StatisticProcess Control )77.TOC :限制理论(Theory ofConstraints)78.TPM :全面生产管理( TotalProduction Management)79.TQC :全面质量管理( Total QualityControl )80.TQM :全面品质管理( Total QualityManagement)81.WIP :在制品( Work In Process)QS:Quality system 品质系统CS:Coutomer Sevice 客户服务QC:Quality control 品质管理IQC:Incoming quality control 进料检验LQC:Line Quality Control 生产线品质控制IPQC:In process quality control 制程检验FQC:Final quality control 最终检验OQC:Outgoing quality control 出货检验QA:Quality assurance 品质保证SQA:Source(supplier) Quality Assurance 供应商品质保证(VQA) CQA:Customer Quality Assurance 客户质量保证PQA rocess Quality Assurance 制程品质保证QE:Quality engineer 品质工程CE:component engineering 零件工程EE:equipment engineering 设备工程ME:manufacturing engineering 创造工程TE:testing engineering 测试工程PPE roduct Engineer 产品工程IE:Industrial engineer 工业工程ADM: Administration Department 行政部RMA:客户退回维修CSDI:检修PC:producing control 生管MC:mater control 物管GAD: General Affairs Dept 总务部A/D: Accountant /Finance Dept 会计LAB: Laboratory 实验室DOE:实验设计HR:人资PMC:企划RD:研发W/H:仓库SI:客验PD: Product Department 生产部PA:采购(PUR: Purchaing Dept)SMT:Surface mount technology 表面粘着技术MFG:Manufacturing 创造MIS:Management information system 资迅管理系统DCC:document control center 文件管制中心QT:Quality target 品质目标QP:Quality policy 目标方针QI:Quality improvement 品质改善CRITICAL DEFECT:严重缺点(CR)MAJOR DEFECT:主要缺点( MA)MINOR DEFECT:次要缺点( MI)MAX:Maximum 最大值MIN:Minimum 最小值DIA iameter 直径DIM imension 尺寸LCL:Lower control limit 管制下限UCL:Upper control limit 管制上限EMI:电磁干扰ESD:静电防护EPA:静电保护区域ECN:工程变更ECO:Engineering change order 工程改动要求(客户) ECR:工程变更需求单CPI:Continuous Process Improvement 连续工序改善Compatibility :兼容性Marking :标记DWG rawing 图面Standardization :标准化Consensus :一致Code :代码ZD:Zero defect 零缺点Tolerance :公差Subject matter :主要事项Auditor :审核员BOM:Bill of material 物料清单Rework :重工ID:identification 识别,鉴别,证明PILOT RUN: (试投产)FAI:首件检查FPIR:First Piece Inspection Report 首件检查报告FAA:首件确认SPC :统计制程管制CP: capability index (准确度)CPK: capability index of process(制程能力)PMP:制程管理计划(生产管制计划)MPI:制程分析DAS efects Analysis System 缺陷分析系统PPB :十亿分之一Flux :助焊剂P/N:料号L/N:Lot Number 批号Version :版本Quantity :数量Valid date :有效日期MIL-STD:Military-Standard 军用标准ICT: In Circuit Test (路线测试)ATE:Automatic Test Equipment 自动测试设备MO: Manafacture Order 生产单T/U: Touch Up (锡面修补)I/N:手插件P/T:初测F/T: Function Test (功能测试-终测)AS 组立P/K:包装TQM:Total quality control 全面品质管理MDA:manufacturing defect analysis 制程不良分析(ICT) RUN-IN:老化实验HI-pot :高压测试FMI:Frequency Modulation Inspect 高频测试DPPM: Defect Part Per Million(不良率的一种表达方式:百万分之一) 1000PPM 即为 0.1% Corrective Action: (CAR 改善对策)ACC :允收REJ:拒收S/S:Sample size 抽样检验样本大小SI-SIV:Special I-Special IV 特殊抽样水平等级CON:Concession / Waive 特采ISO:国际标准化组织ISA:Industry Standard Architecture 工业标准体制结构OBA:开箱稽核FIFO:先进先出PDCA:管理循环Plan do check action 计划,执行,检查,总结WIP:在制品(半成品)S/O: Sales Order (业务定单)P/O: Purchase Order (采购定单)P/R: Purchase Request (请购单)AQL:acceptable quality level 允收品质水准LQL;Limiting quality level 最低品质水准QVL:qualified vendor list 合格供应商名册AVL :认可的供货商清单(Approved Vendor List) QCD: Quality cost delivery (品质,交期,成本) MPM:Manufacturing project management 创造专案管理KPI:Key performance indicate 重要绩效指标MVT:Manufacturing Verification Test 创造验证试产Q/R/S:Quality/Reliability/Service 质量/可靠度/服务STL:ship to line (料到上线)NTF:No trouble found 误判CIP:capacity improvement plan (产能改善计划) MRB:material review board (物料审核小组)MRB:Material reject bill 退货单JIT:just in time (即时管理)5S:seiri seiton seiso seiketsu shitsuke(整理,整顿,清扫,清洁,修养)SOP:standard operation process (标准作业程序)SIP:Specification inspection process 制程检验规格TOP: Test Operation Process (测试作业流程)WI: working instruction (作业指导书)SMD:surface mounting device (表面粘着原件)FAR:failure aualysis report 故障分析报告CAR:Corrective action report 改善报告BPR:企业流程再造 (Business Process Reengineering)ISAR :首批样品认可(Initial Sample Approval Request)-JIT :实时管理 (Just In Time)QCC :品管圈 (Quality Control Circle)Engineering Department (工程部)TQEM: Total Quality Environment Management(全面品质环境管理)PD: Production Department (创造)LOG: Logistics (后勤支持)Shipping: (进出口)AOQ:Average Output Quality 平均出货质量AOQL:Average Output Quality Level 平均出货质量水平FMEA:failure model effectiveness analysis 失效模式分析CRB: Change Review Board (工程变更会议)CSA:Customer Simulate Analysis 客户摹拟分析SQMS:Supplier Quality Management System 供应商品质管理系统QIT: Quality Improvement Team 品质改善小组QIP:Quality Improvement Plan 品质改善计划CIP:Continual Improvement Plan 持续改善计划M.Q.F.S: Material Quality Feedback Sheet (来料品质回馈单) SCAR: Supplier Corrective Action Report (供货商改善对策报告)8D Sheet: 8 Disciplines sheet ( 8D 单)PDCA:PDCA (Plan-Do-Check-Action) (管理循环)MPQ: Material Packing Quantity (物料最小包装量)DSCN: Delivery Schedule Change Notice (交期变更通知) QAPS: Quality Assurance Process Sheet (品质工程表)DRP :运销资源计划 (Distribution Resource Planning)DSS :决策支持系统 (Decision Support System)EC :电子商务 (Electronic Commerce)EDI :电子资料交换 (Electronic Data Interchange)EIS :主管决策系统 (Excutive Information System)ERP :企业资源规划 (Enterprise Resource Planning)FMS :弹性创造系统 (Flexible Manufacture System)KM :知识管理 (Knowledge Management)4L :逐批订购法 (Lot-for-Lot)LTC :最小总成本法 (Least Total Cost)LUC :最小单位成本 (Least Unit Cost)MES :创造执行系统 (Manufacturing Execution System)MPS :主生产排程 (Master Production Schedule)MRP :物料需求规划 (Material Requirement Planning)MRPⅡ:创造资源计划 (Manufacturing Resource Planning)OEM :委托代工 (Original Equipment Manufacture)ODM :委托设计与创造 (Original Design & Manufacture)OLAP :线上分析处理 (On-Line Analytical Processing)OLTP :线上交易处理 (On-Line Transaction Processing)OPT :最佳生产技术 (Optimized Production Technology)PDCA:PDCA 管理循环 (Plan-Do-Check-Action)PDM :产品数据管理系统 (Product Data Management))RCCP :粗略产能规划 (Rough Cut Capacity Planning)SCM :供应链管理 (Supply Chain Management)SFC :现场控制 (Shop Floor Control)TOC :限制理论 (Theory of Constraints)TQC :全面品质管制 (Total Quality Control)FYI/R:for your information/reference 仅供参考ASAP:尽快S/T:Standard time 标准时间TPM:total production maintenance :全面生产保养ESD Wrist strap :静电环IT:information technology 信息技术,资讯科学CEO:Chief Executive Officer 执行总裁COO:Chief Operaring Officer 首席业务总裁SWOT:Strength,Weakness,Opportunity,Threat优势﹐弱点﹐机会﹐威胁Competence :专业能力Communication :有效沟通Cooperation :统御融合Vibration Testing :振动测试IDP:Individual Development Plan 个人发展计划MRP:Material Requirement Planning 物料需求计划MAT'S:Material 材料LRR:Lot Rejeet Rate 批退率ATIN:Attention 知会3C:Computer ,Communication , Consumer electronic消费性电子5W1H:When , Where , Who , What , Why , Ho5M: Man , Machine , Material , Method , Measurement人,机器,材料,方法,测量4MIE: Man,Material,Machine,Method,Environment人力,物力,财务,技术,时间(资源)7M1I: Manpower , Machine , Material , Method, Market , Management , Money , Information 人力,机器,材料,方法, 市场,管理,资金,资讯Accuracy 准确度Action 行动Activity 活动Analysis Covariance 协方差分析Analysis of Variance 方差分析Approved 承认Attribute 计数值Average 平均数Balance sheet 资产负债对照表Binomial 二项分配Brainstorming Techniques 脑力风暴法Cause and Effect Matrix 因果图(鱼骨图)CL:Center Line 中心线Check Sheets 检查表Complaint 投诉Conformity 合格(符合)Control 控制Control chart 控制(管制)图Correction 纠正Correlation Methods 相关分析法CPI: continuouse Process Improvement 连续工序改善Cross Tabulation Tables 交叉表CS:Customer Sevice 客(户)服(务)中心DSA: Defects Analysis System 缺陷分析系统Data 数据 Description:品名DCC: Document Control Center 文控中心Decision 决策、判定Defects per unit 单位缺点数Description 描述Device 装置Do 执行DOE: Design of Experiments 实验设计Element 元素Engineering recbnology 工程技Environmental 环境Equipment 设备Estimated accumulative frequency 计算估计累计数E Equipment Variation 设备变异External Failure 外部失效,外部缺陷FA: Failure Analysis 失效分析Fact control 事实管理Fatigue 疲劳FMEA: Failure Mode and Effect Analysis 失效模式与效果分析FP First-Pass Yield (第一次通过)合格率FQA: Final Quality Assurance 最终品质保证FQC: Final Quality control 最终品质控制Gauge system 测量系统Grade 等级Histogram 直方图Improvement 改善Initial review 先期审查Inspection 检验Internal Failure 内部失效、内部缺陷IPQC: In Process Quality Control 制程品质控制IQC: Incomming Quality Control 来料品质控制IS International Organization for Standardization 国际标准化组织LCL: Lower Control limit 管制下限LQC: Line Quality Control 生产线品质控制LSL: Lower Size Limit 规格下限Machine 机械Manage 管理Materials 物料Measurement 测量Median 中位数MSA: Measurement System Analysis 测量系统分析Occurrence 发生率Operation Instruction 作业指导书Organization 组织Parto 柏拉图PPM arts per Million (百万分之)不良率Plan 计划Policy 方针Population 群体PQA: Process Quality Assurance 制程品质保证Practice 实务(践)Prevention 预防Probability 机率Probability density function 机率密度函数Procedure 流程Process 过程Process capability analysis 制程能力分析(图)Process control and Process capability 制程管制与制程能力Product 产品Production 生产Projects 项目QA: Quality Assurance 品质保证QC: Quality Control 品质控制QE: Quality Engineering 品质工程QFD: Quality Function Desgin 品质机能展开(法)Quality 质量Quality manual 品质手册Quality policy 品质政策(质量方针)Random experiment 随机试验Random numbers 随机数R:Range 全距(极差)Reject 拒收Repair 返修Repeatusility 再现性Reproducibility 再生性Requirement 要求Responsibilities 职责Review 评审Reword 返工Rolled yield 直通率RPN: Risk Priority Number 风险系数Sample 抽样,样本Sample space 样本空间Sampling with replacement 放回抽样Sampling without replacement 不放回抽样Scatter diagram 扩散图分析Scrap 报废Simple random sampling 简单随机取样Size 规格SL: Size Line 规格中心线Stratified random sampling 分层随机抽样SOP: Standard Operation Procedure 标准作业书SPC: Statistical Process Control 统计制程管制Specification 规范SQA: Source(Supplier) Quality Assurance 供货商品质保证Stage sampling 分段随机抽样Standard Deviation 标准差Sum of squares 平方和Taguchi-method 田口(试验)方法Theory 原理TQC: Total Quality Control 全面品质控制TQM: Total Quality Management 全面品质管理Traceablity 追溯Training 培训UCL: Upper Control Limit 管制(控制)上限USL: Upper Size Limit 规格上限Validation 确认Variable 计量值Verification 验证Version 版本VOC: Voice of Customer 客户需求VOE: Voice of Engineer 工程需求Inventory stock report:庫存清单报告Sales order report:出货报告QC quality control 品质管理人员FQC final quality control 终点质量管理人员IPQC in process quality control 制程中的质量管理人员OQC output quality control 最终出货质量管理人员IQC incoming quality control 进料质量管理人员TQC total quality control 全面质量管理POC passage quality control 段检人员QA quality assurance 质量保证人员OQA output quality assurance 出货质量保证人员QE quality engineering 质量工程人员FAI first article inspection 新品首件检查FAA first article assurance 首件确认CP capability index 能力指数CPK capability process index 模具制程能力参数SSQA standardized supplier quality audit 合格供货商质量评估FMEA failure model effectiveness analysis 失效模式分析AQL Acceptable Quality Level 运作类允收质量水平S/S Sample size 抽样检验样本大小ACC Accept 允收REE Reject 拒收CR Critical 极严重的MAJ Major 主要的MIN Minor 轻微的Q/R/S Quality/Reliability/Service 质量/可靠度/服务P/N Part Number 料号L/N Lot Number 批号AOD Accept On Deviation 特采UAI Use As It 特采FPIR First Piece Inspection Report 首件检查报告PPM Percent Per Million 百万分之一SPC Statistical Process Control 统计制程管制SQC Statistical Quality Control 统计质量管理GRR Gauge Reproductiveness & Repeatability 量具之再制性及重测性判断量可靠与否DIM Dimension 尺寸DIA Diameter 直径N Number 样品数QIT Quality Improvement Team 质量改善小组ZD Zero Defect 零缺点QI Quality Improvement 质量改善QP Quality Policy 目标方针TQM Total Quality Management 全面质量管理RMA Return Material Audit 退料认可7QCTools 7 Quality Control Tools 品管七大手法ECN Engineering Change Notice 工程变更通知(供货商)ECO Engineering Change Order 工程改动要求(客户)PCN Process Change Notice 工序改动通知PMP Product Management Plan 生产管制计划SIP Standard Inspection Procedure 制程检验标准程序SOP Standard Operation Procedure 创造作业规范IS Inspection Specification 成品检验规范BOM Bill Of Material 物料清单PS Package Specification 包装规范SPEC Specification 规格DWG Drawing 图面ES Engineering Standard 工程标准CGOO China General PCE 龙华厂文件IWS International Workman Standard 工艺标准ISO International Standard Organization 国际标准化组织GS General Specification 普通规格PMC Production & Material Control 生产和物料控制PCC Product control center 生产管制中心PPC Production Plan Control 生产计划控制MC Material Control 物料控制DC Document Center 资料中心QE Quality Engineering 质量工程(部)QA Quality Assurance 质量保证(处)QC Quality Control 质量管理(课)PD Product Department 生产部LAB Laboratory 实验室IE Industrial Engineering 工业工程R&D Research & Design 设计开辟部PCs Pieces 个(根,块等)PRS Pairs 双(对等)CTN Carton 卡通箱PAL Pallet/skid 栈板PO Purchasing Order 采购定单MO Manufacture Order 生产单D/C Date Code 生产日期码ID/C Identification Code (供货商)识别码SWR Special Work Request 特殊工作需求L/N Lot Number 批号P/N Part Number 料号OEM Original Equipment Manufacture 原设备创造PC Personal Computer 个人计算机CPU Central Processing Unit 中央处理器A.S.A.P As Soon As Possible 尽可能快的E-MAIL Electrical-Mail 电子邮件N/A Not Applicable 不合用QTY Quantity 数量I/O input/output 输入/输出NG Not Good 不行,不合格C=0 Critical=0 极严重不允许APP Approve 核准,认可,承认CHK Check 确认ASS'Y Assembly 装配,组装T/P True Position 真位度5WIH When, Where, Who, What, Why, How to6M Man, Machine, Material, Method, Measurement, Message4MTH Man, Material, Money, Method, Time, How 人力,物力,财务,技术,时间(资源) SQA Strategy Quality Assurance 策略质量保证DQA Design Quality Assurance 设计质量保证MQA Manufacture Quality Assurance 创造质量保证SSQA Sales and service Quality Assurance 销售及服务质量保证LRR Lot Reject Rate 批退率SPS Switching power supply 电源箱DT Desk Top 卧式(机箱)MT Mini-Tower 立式(机箱)DVD Digital Video DiskVCD Video Compact DiskLCD Liquid Crystal DisplayCAD Computer Aided DesignCAM Computer Aided ManufacturingCAE Computer Aided EngineeringPCB Printed Circuit Board 印刷电路板CAR Correction Action Report 改善报告NG Not Good 不良WDR Weekly Delivery Requirement 周出货要求PPM Percent Per Million 百万分之一TPM Total Production Maintenance 全面生产保养MRP Material Requirement Planning 物料需计划OS Operation System 操作系统TBA To Be Assured 待定,定缺D/C Drawing ChangeP/P Plans & ProcedureEMI Electrical-Music Industry 电子音乐工业Electrical Magnetic Interference 电子干扰RFI Read Frequency Input 读频输入MMC Maximum Material ConditionMMS Maximum Material SizeLMC Least Material ConditionLMS Least Material SizeLED lighting-emitting diode 发光二极管。
质量相关术语英中文对照
质量相关术语英中文对照IQC: incomming quality control 进料检验LQC: line quality control 生产线品质控制IPQC: inprocess quality control 制程品质控制FQC: final quality control 最终品质控制OQC: outgoing quality control 出货品质控制PQA: process quality assurance 制程品质保证FQA: final quality assurance 最终品质保证SQA: source(supplier) quality assurance 供应商品质保证DAS: defect analysis system 缺陷分析系统DCC: document control center 文控中心QCC: quality control circle 品管圈QA: quality assurance OR quality audit 品质保证品质稽核QC: quality control 品质控制QE: quality engineering 品质工程ZD: zero defect 零缺陷FMEA: failure mode and effects analysis 潜在缺陷模式和影响分析FMA: failure mode analysis 故障模式分析 FEA: failure effect analysis 故障效应分析FCA: failure criticality analysis 故障危害度分析FA: failure analysis 坏品分析CS: customer service 客户服务CPI: continuous process improvement 连续工序改善DOE: design of experiment 实验设计SQC: statistical quality control 统计品质控制TQC: total quality control 全面品质控制CWQC: company-wide quality control 全公司品质管理GWQC: group-wide quality control 全集团品质管理PDCA: plan do check action 计划执行检查矫正AQL: acceptable quality level 允收水准SOP: standard operation procedure 操作标准SIP: standard inspection procedure 检验标准IE: industrial research 工业工程MR: method research 方法研究OR: operation research 工作研究VE: value engineering 价值工程5W2H: what 做什么?有必要吗? Why 为什么要做?目的在哪里?where 哪里做?没有更合适的地方吗?When 何时做?时间是否合适?Who 谁做?有没有更合适的人?How 如何做?有没有更好的方法?how much 需要的成本如何?4M1E: manpower 人员method 方法machine 机器material 物料environment 环境SGS:Societe Generaie de Surveillance S.A. 瑞士通用集團,總部於1878年在瑞士日內成立.(瑞士通用集團<SGS>與中國標準技術開發公司<CSTC>合資成立通標標準技術服務有限公司<SGS-CSTC>.國際論證服務部亦於同時成立.MSDS:Material Safety Data Sheet 物質安全資料表.ICP:Inductively Coupled Plasma 誘導結合等離子.XRF:檢測儀器,X射線瑩光光譜儀.用來分析各種物質中的元素成份.GP:Green Partner 綠色伙伴RoHS:Restriction of the use of certain Hazardous Substance on electrical and electronic equipment. 在電子電氣設備中限制使用某些有害物質指令.。
质量术语中英文对照
质量管理中英文名词对照质量管理中英文名词对照表Accuracy 准确度Active 主动Action 评价.处理Activity 活动Add 加Addition rule 加法运算规则Analysis Covariance 协方差分析Analysis of Variance 方差分析Appraisal Variation 评价变差Approved 承认ASQC 美国质量学会Attribute 计数值Audit 审核Automatic database recovery 数据库错误自动回复Average 平均数balance 平衡Balance sheet 资产负债对照表Binomial 二项分配Body 机构Brainstorming Techniques 脑力风暴法Business Systems Planning 企业系统规划Cable 电缆Capability 能力Cause and Effect matrix 因果图.鱼骨图Center line 中心线check 检查Check Sheets 检查表Chi-square Distribution 卡方分布Clutch spring 离合器弹簧Coining 压印加工Common cause 共同原因Complaint 投诉Compound factor 调合因素Concept 新概念Condenser 聚光镜Conformity 合格Connection 关联Consumer’s risk 消费者之风险Control 控制Control characteristic 管制特性Control chart管制图Control plan 管制计划Correction 纠正Correlation Methods 相关分析法Cost down 降低成本CPI: continuouse Process Improvement 连续工序改善Creep 渐变Cross Tabulation Tables 交叉表CS: customer Sevice 客户中心Cushion 缓冲Customer 顾客DSA: Defects Analysis System 缺陷分析系统Data 数据Data Collection 数据收集Data concentrator 资料集中缓存器DCC: Document Control Center 文控中心Decision 决策.判定Defects per unit 单位缺点数Description 描述Detection 难检度Device 装置Digital 数字Do 执行DOE: Design of Experiments 实验设计Element 元素Else 否则Engineering recbnology 工程技术Entropy 函数Environmental 环境Equipment 设备Estimated accumulative frequency 计算估计累计数EV: Equipment Variation 设备变异Event 事件External Failure 外部失效,外部缺陷FA: Failure Analysis 坏品分析Fact control 事实管理Fatique 疲劳FMEA: Failure Mode and Effect analysis 失效模式与效果分析FPY 合格率FQA: Final Quality Assurance 最终品质保证FQC: Final Quality control 最终品质控制Full-steer 完全转向function 职能Gauge system 量测系统Grade 等级Gum-roll 橡皮滚筒Health meter 体重计Heat press 冲压粘着Histogram 直方图Hi-tech 高科技hypergeometric 超几何分配hysteresis 磁滞现象Improvement 改善Inductance 电感Information 信息Initial review 先期审查Inspection 检验Internal Failure 内部失效,内部缺陷IPQC: In Process Quality Control 制程品质控制IQC: Incomming Quality Control 来料品质控制ISO: International Organization for Standardization 国际标准组织Law of large number 大数法则Link 连接LCL: Lower Control limit 管制下限LQC: Line Quality Control 生产线品质控制LSL: Lower Size Limit 规格下限Machine 机械Manage 管理Materials 物料Measurement 量测Median 中位数Miss feed 漏送Module,sub-system,sub-unit 单位Momentum 原动力Monte garlo method 原子核分裂热运动法MSA: Measurement System Analysis 量测系统分析Multiplication rule 乘法运算规则NIST 美国:标准技术院Normal 常态分布Occurrence 发生率On.off system 开,关系统Operation Instruction 作业指导书Organization 组织Parameter 参数Parto 柏拉图Parts 零件Parts per million 不良率Passive 消极的,被动的Plan 计划Pulse 脉冲Policy 方针Population 群体Power 力量,能源PQA: Process Quality Assurance 制程品质保证Practice 实务Precision 精密度preemptive 先占式多任务Pressure 压缩Prevention 预防Probability 机率Probability density function 机率密度函数Procedure 流程Process 过程Process capability analysis 制程能力分析图Process control and process capability 制程管制与制程能力Producer’s risk 生产者之风险Product 产品Production 生产Program 方案Projects 项目QA: Quality Assurance 品质保证QC: Quality Control 品质控制QE: Quality Engineering 品质工程QFD: Quality Function Desgin 品质机能展开Quality 质量Quality manual 品质手册Quality policy 品质政策Random experiment 随机试验Random numbers 随机数Range 全距Record 记录Reflow 回流Reject 拒收Repair 返修Repeatusility 再现性Reproducibility 再生性Requirement 要求Residual 误差Response 响应Responsibilities 职责Review 评审Reword 返工Robustness 稳健性Rolled yield 直通率RPN: Risk Priority Number 风险系数sample 抽样,样本Sample space 样本空间Sampling with replacement 放回抽样Sampling without peplacement 不放回抽样Scatter diagram 散布图分析Scrap 报废Screw 螺旋Severity 严重度Shot-peening 微粒冲击平面法Simple random sampling 简单随机取样Size 规格SL: Size Line 规格中心线Slip 滑动Stratified random sampling 分层随机抽样SOP: Standard Operation Procedure 标准作业书SPC: Statistical Process Control 统计制程管制Special cause 特殊原因Specification 规范SQA: Source(Supplier) Quality Assurance 供货商品质保证Stage sampling 分段随机抽样Standard Deviation 标准差Sum of squares 统计表supplier 平方和System 供方systematic sampling 系统,体系Statistical tables 系统抽样Taguchi-method 田口方法Technical committees 技术委员会Test piece 测试片Theory 原理Time stamp 时间戳印Time-lag 延迟Title 标题Torque 转矩Total 求和TQC: Total Quality Control 全面品质控制TQM: Total Quality Management 全面品质管理Traceablity 追溯Training 培训Transaction processing and logging 交易处理Trouble 困扰Up and down 上和下UCL: Upper Control Limit 管制上限USL: Upper Size Limit 规格上限Validation 确认Variable 计量值Variance 变异和Vector 向量Verification 验证Version 版本VOC: voice of Customer 客户需求VOE: Voice of Engineer 工程需求。
质量管理相关的词汇
质量管理相关的词汇一、质量(quality)1. 发音:英[ˈkwɒləti];美[ˈkwɑːləti]2. 词性:名词。
3. 释义:产品或服务的优劣程度。
例如:The quality of this product is very high.(这个产品的质量非常高。
)二、管理(management)1. 发音:英[ˈmænɪdʒmənt];美[ˈmænɪdʒmənt]2. 词性:名词。
3. 释义:组织、协调、控制等一系列活动的过程。
例如:Good management can improve the efficiency of the company.(良好的管理能提高公司的效率。
)三、标准(standard)1. 发音:英[ˈstændəd];美[ˈstændərd]2. 词性:名词。
3. 释义:衡量事物的准则。
例如:We should follow the international standards in quality management.(在质量管理中我们应该遵循国际标准。
)四、检验(inspection)1. 发音:英[ɪnˈspekʃn];美[ɪnˈspekʃn]2. 词性:名词。
3. 释义:检查、查看是否符合要求。
例如:The inspection of products is a very important part of quality management.(产品检验是质量管理非常重要的一部分。
)五、控制(control)1. 发音:英[kənˈtrəʊl];美[kənˈtroʊl]2. 词性:名词或动词。
3. 释义:作为名词时,指控制的手段或能力;作为动词时,指掌握住不使任意活动或越出范围。
例如:Quality control is essential for a successful business.(质量控制对一个成功的企业来说是必不可少的。
中英文80个质量术语
1、质量 quality一组固有特性满足要求的程度。
注1:术语“质量”可使用形容词,如:差、好或优秀来修饰。
注2:“固有的”,(其反义是“赋予的”)就是指本来就有的,尤其是那种永久的特性。
2、要求 requirement明示的、通常隐含的或必须履行的需求或期望。
注1:“通常隐含”是指组织、顾客和其他相关方的惯例或一般做法,所考虑的需求或期望是不言而喻的。
注2:特定要求可使用限定词表示,如产品要求、质量管理要求、顾客要求。
注3:规定要求是经明示的要求,如:在文件中阐明。
注4:要求可由不同的相关方提出。
注5:本定义与ISO/IEC导则第2部分;2004的3.12.1中给出的定义不同。
3、等级 grade对功能用途相同的产品、过程或体系所做的不同质量要求的分类或分级。
示例:飞机的舱级和宾馆的等级分类。
注:在确定质量要求时,等级通常是规定的。
4、顾客满意 customer satisfaction顾客对其要求已被满足程度的感受。
注1:顾客抱怨是一种满意程度低的最常见的表达方式,但没有抱怨并不一定表明顾客很满意。
注2:即使规定的顾客要求符合顾客的愿望并得到满足,也不一定确保顾客很满意。
5、能力 capability组织、体系或过程实现产品并使其满足要求的本领。
注:GB/T 3358中确定了统计领域中过程能力术语。
6、能力 competence经证实的应用知识和技能的本领。
注1:在本标准中,所定义的能力的概念是通用的。
在ISO其他的文件中,本词汇的使用可能更加具体。
注2:在GB/T 19000族标准中,术语能力(capability)特指组织、体系或过程的“能力”,而能力(competence)则特指人员的“能力”。
7、体系(系统)system相互关联或相互作用的一组要素。
8、管理体系 management system建立方针和目标并实现这些目标的体系。
注:一个组织的管理体系可包括若干个不同的管理体系,如质量管理体系财务管理体系或环境管理体系。
质量英语词汇大全
质量英语词汇大全AABC analysis ABC 分析Abnormality 不正常性Abscissa 横坐标Absolute deviation 绝对离差Absolute dispersion 绝对离势Absolute error 绝对误差Absolute frequency 绝对次数Absolute number 绝对数Absolute reliability 绝对可靠度Absolute term 绝对项Absolute value 绝对值Absolute variation 绝对变异Abstract number 抽象数Abstract unit 抽象单位Accelerated factor 加速系数,加速因子Accelerated life test 加速寿命试验Accelerated test 加速试验Acceleration 加速度Acceptable limit 允收界限Acceptable process 允收制程水平Acceptable quality 允收品质Acceptable quality level (AQL) 允收质量水平Acceptable reliability level (ARL) 允收可靠度水平Acceptability 允收性Acceptability criterion 允收标准Acceptance 允收,验收Acceptance, probability of 允收机率Acceptance, region of 允收区域Acceptance and rejection criteria 允收与拒收准则Acceptance boundary 允收界限Acceptance coefficient 允收系数Acceptance control chart 验收管制图Acceptance cost 验收费用Acceptance criteria 允收准则Acceptance error 允收误差Acceptance inspection 验收检验Acceptance limit 允收界限Acceptance line 允收线Acceptance number 允收(不良品)数Acceptance plan 验收打算Acceptance procedure 验收程序Acceptance/rectification scheme 允收/精选方案Acceptance sampling, attribute 计数值验收抽样Acceptance sampling, variable 计量值验收抽样Acceptance sampling plan 验收抽样打算Acceptance sampling scheme 验收抽样方案Acceptance test 验收试验Acceptance value 允收值Acceptance zone 允收区域Acceptance product 允收品Accepting lot 允收批Access time 接近时刻,故障诊断时刻Accessibility 可接近性Accident rate 意外率Accidental error 偶误,偶然误差Accidental fluctuation 偶然波动Accidental movement 意外移动Accounting test 验算(决算)试验Accumulated operating time 累积操作时刻Accuracy 准确度Accuracy of data 数据准确度Accuracy of estimation 估量准确度Accuracy of the mean 平均数准确度Achieved availability 实际可用度Action 行动,措施Action, corrective 矫正行动(措施)Action control chart 行动管制图Action limit 行动界限Active line 行动线Active maintenance time 实际爱护时刻Active parallel redundancy 主动并复联(置)Active preventive maintenance 现行预防爱护时刻Active redundancy 主动复联(置)Active repair time 实际修复时刻Active standby 主动备用Active time 运用时刻Actual frequency 实际次数Actual limit 实际界限Actual range 实际全距Actual value 实际值Adaptability 可适应性Adaptive control 修改管制Addition theorem 加法定理Additivity 加法性,可加性Adjusted average 修正平均数Adjusted value 修正值Adjustment factor 调整系数Administration time for a repair 修复之治理时刻Administrative time 治理时刻Adopted value 采纳值Advisory Group on Reliability of Electronic Equipment (AGREE) 电子装备可靠度顾问团Aeronautical Radio, Incorporated (ARINC) 航空无线电公司After-sales service 售后服务Age 年限Age at death 死亡年限Age at failure 失效年限Age-based maintenance 年限基准爱护Aggregative method 综合法Aging 老化Agreement of quality assurance 质量保证之协议Agreement on verification method 验(查)证方法之协议Alarm signals 警告(报)讯号Alert time 待命时刻Algebraic sum 代数和Algorism (Algorithm) 阿拉伯数字计数法Alias 假名Alienation 余相关Alignment chart 列线图Allocation 配当Allocation of reliability 可靠度配当Allowable percent defective (Acceptable quality level, AQL) 允收不良率(允收质量水平)Allowance 允差,裕度Alternative hypothesis 对立假设American Management Association (AMA) 美国治理协会American National Standards Institute (ANSI) 美国标准协会American Society for Quality Control (ASQC) 美国质量治理学会American Society for Mechanical Engineers (ASME) 美国机械工程师学会American Society for Testing and Materials (ASTM) 美国材料试验学会American Standard Association (ASA) 美国标准协会American Statistical Association (ASA) 美国统计协会American War Standards (AWS) 美国战时标准Ambient condition 周遭条件Analysis, sequential 逐次分析Analysis by accumulated frequency 累积法,累积次数分析Analysis by non-accumulated frequency 次数法,非累积次数分析Analysis of correlation 相关分析Analysis of covariance 共变异数分析Analysis of means (AVON) 平均数分析Analysis of problem 问题之分析Analysis of variance (ANOVA) 变异数分析Analysis sample 分析样本Analytical error 分析误差Angular transformation 角度转(变)换Anti-logarithm 逆对数Anti-mode 逆众数AOQL Sampling Table 平均出厂质量界限抽样数Applicability 应用性Applied statistics 应用统计学Apportionment of reliability 可靠度配当Apportionment techniques 配当技术Appraisal cost 鉴定成本,评估成本Appraisal system 评估制度Appraisal of quality 质量评估Approach to sequential testing 逐次试验法Approval of processes and equipment 核准制程与设备Approximate mode 近似众数Approximate number 近似数值Approximation 近似法,概算AQL (Acceptable quality level) 允收(质量)水平Arbitrary average (Assumed average,Arbitrary mean) 假定平均数Arbitrary origin 假定原点Arbitrary scale 假定标度Area bar chart 面积条图Area chart (diagram, graph) 面积图Area sampling 地区抽样Arithmetic average 算术平均数Arithmetic cross 算术交叉Arithmetic graph 算术图Arithmetic line chart 算术线图Arithmetic mean 算术平均数Arithmetic paper 算术纸Arithmetic probability paper 算术机率纸Arithmetic progression (Arithmetic series) 算术级数,等差级数Arithmetic scale 算术标度,等差标度Arithmetic series 算术级数,等差级数Army Ordnance Table 陆军兵工署(抽样)表Army Service Forces Table 陆军(抽样)表序列Array 序列Array distribution 序列分配(布)Array of data 数据序列Assemble 装配(组立)Assembled product 装配品Assembly 装配件Assembly inspection 装配检验Assembly quality analysis report 装配质量分析报告Assessed failure rate 评估失效率Assessed mean active -maintenance time 评估时刻现行爱护时刻Assessed mean life 评估平均寿命Assessed mean time between failures 评估平均失效间格时刻Assessed mean time to failure 评估平均失效前时刻Assessed reliability 评估可靠度Assessed value 评估值Assessment of subcontractor 分包商之评鉴Assignable cause (Special cause) 非机遇缘故(专门缘故)Assignable variation 非机遇变异Associated dependent variable 相联因变数Associated variate 相联变量Association coefficient 相联系数Association of attribute 品性相联Association table 相联表,联合表Assumed mean (Assumed average,Arbitrary average) 假定平均数Assumed median 假定中位数Assumed origin 假定原点Assurance quality 保证质量Assurance function 保证功能Asymmetrical distribution 不对称分配(布)Asymmetry 不对称Asymptotic distribution 趋近分配(布)At random 随机Attribute 计数值,属性Attribute classification 品性分类Attribute data 计数数据Attribute inspection 计数值检验Attribute sampling 计数值抽样Attribute sampling plan 计数值抽样打算Attribute testing (Go no-go testing) 计数值试验(通过与不通过试验)Attribute value 计数值Audit 稽核Audit for reliability 可靠度稽核Audit of decision 稽核决策Audit plan 稽核打算Audit report 稽核报告Auditing report 稽核报告Auto-correlation 自动相关Automatic switch-over redundancy 自动切换复联(置)Automatic test equipment (Am) 自动试验装备Auto-regression 自动回来Availability 可用性,可用度Average (Mean) 平均数,平均值Average, grand 总平均Average, moving 移动平均数Average, sample 样本平均数Average, standard error of 标准误平均数Average, universe 群体平均数Average, weighted 加权平均数Average amount of inspection 平均检验数Average and range chart 平均数及全距(管制)图Average availability 平均可用度Average deviation (A.D.) (Mean deviation) 平均差Average error (Mean error) 平均误差Average number of defects 平均缺点数Average of ratios 比例平均数Average outgoing quality (AOQ) 平均出厂质量Average outgoing quality curve 平均出厂质量曲线Average outgoing quality level 平均出厂质量水平Average outgoing quality limit (AOQL) 平均出厂水平Average quality level 平均出厂质量界限Average quality level line 质量平均线Average quality protection 平均质量爱护Average range 平均全距Average run length (ARL) 平均连串长度Average sample number (ASN) 平均样品数Average range 平均全距Average run length (ARL) 平均连串长度Average sample number(ASN) 平均样本数Average sample number curve 平均样本曲线Average sample size (ASS) 平均样本大小Average sample size curve 平均样本大小曲线Average sample 平均抽样Average total inspection (ATI) 平均总检验(件)数Average total inspection curve 平均总检验数曲线Average value 平均值Avoidable cause 可幸免之缘故Avoidable quality cost 可幸免之质量成本Axiom 公理Axis 轴Axis of abscissa 横轴Axis of ordinate 纵轴BBad lot 坏批Balance frequency 平稳次数Balanced complete type 平稳完备型Balanced design 平稳设计Balanced experiment 平稳实验Balanced incomplete type 平稳不完备型Balanced sample 平稳样本Band chart 带形图Band curve chart 带形曲线图Bank of reliability data 可靠度数据库Bar chart (diagram) 条(形)图Bartlett's test 巴特莱特试验Base line 基线Base number 基数Base period 基期Base point 基点Basic reliability 差不多可靠度Batch (Lot) 批Batch of material 材料批Batch process 分批制造方法Batch size 批量Batch testing 批试验Bathtub curve 浴缸曲线Bathtub failure curve 浴缸失效曲线Bayes' estimator 贝式估量式Bayes' theorem 贝式定理Bayesian approach 贝式法Bayesian approcah to design 贝式设计法Bayesian estimation 贝式估量Bead map 标珠图Bell-shaped curve 钟形曲线Bell-shaped distribution 钟形分配(布)Bell-shaped failure pattern 钟形失效型态JBell System 贝尔系统Bell Telephone Laboratories 贝尔实验室Bell Telephone Laboratories Sampling Table 贝尔(实验室)抽样表Benign failure 无危险的失效Bernoulli distribution 白努利分配(布)Best fit 最适配合Best fitting line 最适线Best fitting curve 最适曲线Best linear invariant estimator 最佳线型不变估量式Best linear unbiased estimator 最佳线型不偏估量式Beta coefficient β系数Beta distribution β分配(布)Beta function β函数Between-class variance 组间变异数Between-column variance 组间变异Between-column variation 行间变异Between-row variation 列间变异Between sample variation 样本间变异Bias 偏差Bias, downward 向下偏差Bias, downward type 向下型偏差Bias, upward 向上偏差Bias, upward type 向上型偏差Biased error 偏误Biased estimate 偏差估量Biased sample 偏差样本Biased test 偏差试验Bilateral 双边Bill of material (BOM) 物料清单Bimodal 双峰Bimodal curve 双峰曲线Bimodal distribution 双峰分配(布)Bimodal redundancy 双峰型复联(置)Bimodality 双峰性Binary system 二元制Binomial, skewed 偏态二项Binomial coefficient 二项系数Binomial curve 二项曲线Binomial distribution 二项分配(布)Binomial equation 二项方程式Binomial expansion 二项展开式Binomial population 二项群体Binomial probability distribution 二项机率分配(布)Binomial probability paper(BIPP) 二项机率纸Binomial series 二项级数Binomial theorem 二项定理Bi-serial 双数列Biserial correlation 双数列相关Biserial coefficient of correlation 双数列相关系数Biserial ratio of correlation 双数列相关比Bivariate 双变量Bivariate distribution 双变量分配(布)Bivariate frequency distribution 双变量次数分配(布)Bivariate normal distribution 双变量常态分配(布)Blend 混,混合Block 量块,(实验)区,方块Block design 实验区设计Block diagram 方块图Block factor 地区因素Block in series 串联方块Boundary 界Boundary, cell 组界Bowker-Goode variables plan Bowker-Goode 记量值(抽样)打算Bowl drawing 碗珠抽样Bowl experiment 碗珠实验Bowl test 碗珠试验Bowley's coefficient of skewness Bowley偏态系数Bowley's formula Bowley公式Bureau of Ordnance, U.S. Navy 美国海军兵工署Break-even chart 损益平稳图Break-even point (BEP) 损益平稳点Breakthrough 突破British Standards Institution 英国标准协会Broken curve 中断曲线Broken series 中断数列Broken trend 中断趋势Built-in test (BIT) 内含测试,自测Bureau of Commodity Inspection and Quarantine (BCIQ) 商品检验局Bulk sampling Burn-in 大宗抽样Business Process Management (BPM) 业务流程治理Buyer 买方,客户CC chart C(管制)图Calculated value (Computed value) 运算值Calculation chart 运算图Calendar time 日历时刻Calibration 校正Calibration record 校正记录Camp-Meidell inequality Camp-Meidell不等式Capability 能力Capability, machine 机器能力Capability, process 制程能力Capability ratio 能力比Capacity 能量,容量Caption 纵标目Carrying out the audit 实施稽核Cartogram 统计图Case method 个案法Catastrophic failure 突然故障,崩坏失效,致命失效Category 类别Cauchy distribution Cauchy 分配(布)Causality 因果律Cause 缘故Cause, assignable 非机遇缘故Cause, avoidable 可幸免缘故Cause, chance 机遇缘故Cause, common 共同缘故Cause, findable 可查找缘故Cause, random 随机缘故Cause, special 专门缘故Cause, substantial 本质缘故Cause, unavoidable 不可幸免缘故Cause and effect 因果Cause and effect diagram 特性要因图Cell 组Cell boundary 组界Cell deviation (d) 组离差Cell frequency (f) 组次数Cell interval (i,h) 组距Cell limit 组限Cell method 分组法Cell mid-point (Xm) 组中点Cell value 组值Censored sample 检剔样本Censored test 检剔试验Censorship 检剔Census 普查Center line 中线Central inspection station 中央检验站Central limit theory 趋中理论,中央极限理论Central limit theorem 趋中理论,中央极限理论Central line (CL.) 中心线Central moment 中心动差Central ordinate 中纵坐标Central tendency 集中趋势Central value 中值,中心值Certainty 确定性Certified chart 验证图Certified equipment 合格设备Certified quality engineer (CQE) 合格质量工程师Certified quality technician (CQT) 合格质量技术师Certified reliability engineer (CRE) 合格可靠度工程师Certification 验证Chain model 炼结模型Chain reliability 炼结可靠度Chain sampling plan (CHSP) 炼结抽样打算Chance 机遇Chance cause 机遇缘故Chance error (Probable error) 机遇误差,机误Chance factor 机遇因素Chance failure 机遇故障,机遇失效Chance failure period 机遇失效期Chance fluctuation 机遇波动Chance variable 机遇变数Chance variation 机遇变异Change control 改变(变更)治理Chaotic variation 纷乱变异Characteristic (质量)特性Characteristic, qualitative 质的特性Characteristic, quantitative 量的特性Characteristic curve, operating (OC curve) 操作特性曲线,OC曲线Characteristic diagram 特性要因图Characteristic function 特性函数Characteristic life 特性寿命Characteristic operating curve (OC curve) 特性操作曲线(OC曲线)Characteristic value 特性值Chargeable failure 可计列失效,故障Charlier check Charlier 覆检法Chart 图,(管制)图Chart, acceptance control 验收管制图Chart, average and range 平均数及全距(管制)图Chart, average number of defects 平均缺点数(管制)图Chart, control 管制图Chart, cumulative sum 累积和(管制)图Chart, defects per unit 每单位内缺点数(管制)图Chart, fraction defective 不良率(管制)图Chart, group 多项(管制)图Chart, individual 个别值(管制)图Chart, median 中位数(管制)图Chart, moving and range 移动平均数及全距(管制)图Chart, moving range 移动全距(管制)图Chart, modified control limits 修正管制界限(管制)图Chart, multi-variation 变异值(管制)图Chart, multiple 复式(管制)图Chart, number defectives 不良(品)数(管制)图Chart, number of defects 缺点数(管制)图Chart, percent defective 不良率管制图Chart, range 全距(管制)图Chart, run 操作(记录)图Chart, shop 工厂(管制)图Chart, Shewhart control Shewhart 管制图Chart, two-way control 双向管制图Chebyshev's inequality Chebyshev 不等式Check inspection 复核检验Check sampling 复核检验员Check inspector 复核抽样Chi-square ,卡方Chi-square distribution 分配(布),卡方分配(布)Chi-square test 检定,卡方检定Chi-squared distribution 分配(布),卡方分配(布)Chip 小圆片Chronic defect 慢性缺点Chronological chart 时序图Chronological series 时序数列Class 组Class boundaries (True class limits)组界(真实组限)Class form 组形Class frequency (f) 组次数Class interval (i,h) 组距Class limit 组限Class mark 组标,中值Class mean 组平均数Class mid-point(Xm) 组中点Class mid-value 组中值Class of median 组中位数Class value 组值Classes, number of 组数Classification chart 分组,分类Classification frequency 分组次数Classification frequency series 分组次数数列Classification of defectives 不良品分类Classification of defects 缺点分类Classfication of failure 失效分类,故障分类Classification process 分组(方)法Clearance 间隙,余隙Cluster 集团Cluster sampling 集团抽样Cochran's test Cochran 检定Code 简化,代号Code letter 代字Coded unit 简化单位Coded value 简化值Coding 简化Coding rule 简化规则Coefficient 系数Coefficient, correlation 相关系数Coefficient of alienation 余相关系数Coefficient of association 相关系数Coefficient of binomial distribution 二项分配(布)系数Coefficient of colligation 束联系数Coefficient of contingency 列联系数Coefficient of correlation 相关系数Coefficient of determination (r2) 定限系数Coefficient of dispersion 离势系数Coefficient of kurtosis 峰度系数Coefficient of multiple correlation 复相关系数Coefficient of net correlation 净相关系数Coefficient of net regression 净回来系数Coefficient of non-determination 不定限系数Coefficient of part correlation 部份相关系数Coefficient of partial correlation 部份相关系数Coefficient of rank correlation 等级相关系数Coefficient of reliability 可靠度系数Coefficient of regression 回来系数Coefficient of skewness 偏态系数,偏斜系数Coefficient of variation (CV) 变异系数Cold standby 冷置系数Collective quality 集体品质Columbia sampling table Columbia 抽样打算Column (Column/Row) 行,纵行(行/列)Column head 标目Column diagram 直行图Combination 组合Combinational model 复合模型Combined environmental reliability test (CERT) 复合环境可靠度试验Combined failure 复合失效,复合故障Combined stress life test 复合应力寿命试验Commissioning 委制Commodity 商品Common cause (Chance cause) 共同缘故(机遇缘故)Company standard 公司标准Companys need 公司需要Company-wide quality control (CWQC) 全公司质量治理Comparability 可比性Comparable measure 可比量数Compensating error 补偿误差Compensating fluctuation 补偿波动Competing product 竞争产品Complete association 全相联Complete block design 完全区集法Complete confounding 完全交络Complete dissociation 全不相联Complete failure 完全故障,完全失效Completely randomized design 完全随机法Complaint 埋怨Complaint index 埋怨指标Completed product verification 成品验证Component 组件,组件Component bar chart 成份条图Component distiibution 组成份分配(布)Component part diagram 成份图Component ratio 成份比Component reliability 组件可靠度Component variance 成份变异数Components of variance 变异数成份Composite curve 复合曲线Composite design 复合法Composite hypothesis 复合假设,组合假设Composite unit 复合单位Compound distribution 复合分配(布)Compound event 复合事件Compound probability 复合机率Compounding technique 复合法Compressed limit 压缩界限Compressed limit gauging 压缩界限规则Computed value 运算值Concentric circle diagram 同心圆图Conception of limit 极限概念Conceptual design 概念设计Conceptual design review 概念设计审查Concession 特采,特认Concomitant factor 共变因素Concomitant variable 共变数Concomitant variation 共变异Concurrency 并行Condition maintenance 状态爱护Condition monitoring 状态监督Condition-based maintenance 状态基准爱护Conditional probability 条件机率Conditions of use 使用条件Confidence 信任,信任Confidence coefficient 信任系数,信任系数Confidence interval 信任区间,信任区间Confidence in test results 试验结果的信任度Confidence level 信任水平,信任水平Confidence limit 信任界限,信任界限Confidence range 信任全距,信任全距Configuration control 型态管制Configuration items 型态件Configuration management 型态治理Confirmation 确认Conformance to the requirement 符合要求Conformation 一致Conforming article 合格品Conformity 符合Confounding 交络Confounding, complete 完全交络Confounding, partial 部份交络Connector 连接器Consignment 托付,寄售Consistency 一致性Constancy 恒久性Constancy of great numbers 大数恒久性Constant 常数Constant cause system 恒常缘故系统Constant error 恒常误差Constant failure period 恒常失效期Constant failure rate dustribution 恒常失效率分配(布)Constant weight (Fixed weight) 固定权数Constraint 束缚Consultant 治理顾问师Consumer 消费者Consumer acceptance specification 消费者允收规格Consumerism 消费者主义Consumer's risk (CR) 消费者冒险率Consumer test panel 消费者试验小组Consumer preference 消费者偏好Consumer sensitivity test 消费者感官试验Contingency 列联Contingency coefficient 列联系数Contingency table 列联表Contingency theorem 列联理论Continuity correction 连续校正Continuous change 连续变更Continuous data 连续数据Continuous distribution 连续分配(布)Continuous production 连续生产Continuous sampling 连续抽样Continuous sampling plan (CSP) 连续抽样打算Continuous series 连续数列Continuous variable 连续变量Contract 合约Contract preparation 拟定合约Contract review 合约检讨Contract requirements 合约需求Contract requirements analysis 合约需求分析Contractors 合约商Contrast analysis 对比分析Control, in 在管制(状态)下Control, lack of 缺乏管制Control, out of 超出管制Control, state of 管制状态Control, under 在管制(状态)下Control chart 管制图Control chart, cumulative sum 累积和管制图Control chart, defects per unit 每单位内缺点数管制图Control chart, two-way 双向管制图Control chart factor 管制图系数Control chart for attribute 计数值管制图Control chart for variable (measurement) 计量值管制图Control chart method 管制图法Control chart pattern 管制图类型Control factor 管制因素Control gaging (gauging) 管制规测Control level 管制水平Control limit 管制界限Control limit, lower 管制下限Control limit, modified 修正管制界限Control limit, upper 管制上限Control limit factor 管制界限因子Control line 管制线Control of measuring and test equipment 量测与试验设备之管制Control of nonconforming material 不合格物料之管制Control of nonconforming product 不合格产品之管制Control of production 生产管制Control of reliability 可靠度管制Control of verification status 验证状况之管制Control plan 管制打算Control point 管制点Control station 管制站Control system 管制系统Controllability 可管制性Controlled process 管制制程Controlled state 管制状态Controlled variability 管制变异性Controlled variable 管制变数Controlling item 管制项目Convenience lot 合宜的批Convergence 收敛Cooked distribution 中断分配(布)Coordinate 坐标Coordinate axis 坐标轴Coordinate line 坐标线Coordination 和谐Coordination for reliability 可靠度和谐Correction 校正,修正Correction, Sheppard Sheppard 校正数Correction factor 修正因子Correction for continuity 连续校正Correction for mean 平均数校正Correction term 校正项Corrective action 矫正行动,改正措施Corrective maintenance 矫正爱护,改正爱护Corrective maintenance time 矫正爱护时刻,改正爱护时刻Corrective sorting 修正选别Correlated measure 相关量数Correlated samples 相关样本Correlation 相关Correlation, coefficient of 相关系数Correlation, direct 直截了当相关Correlation, index of 相关指数Correlation, inverse 反相关Correlation, multiple 复相关Correlation, negative 负相关Correlation, net 净相关Correlation, nonlinear 非线性相关Correlation, nonsense 无意义相关Correlation, part 部份相关,偏相关Correlation, partial 部份相关,偏相关Correlation, perfect 完全相关Correlation, rank 等级相关Correlation, serial 数序相关Correlation, simple 简相关Correlation, zero 零相关Correlation analysis 相关分析Correlation chart 相关图Correlation, coefficient 相关系数Correlation coefficient, rank 等级相关系数Correlation matrix 相关矩阵Correlation of attributes 品性相关Correlation ratio 相关比Correlation of x on y x与y的相关比Correlation ratio of y on x y与x的相关比Correlation scatter chart 相关散布图Correlation surface 相关面Correlation table 相关表Correlation theory 相关理论Correlogram 相关图Corrosive atmosphere 腐蚀性空气Cost 成本,费用Cost, acquisition 取得成本Cost, appraisal 评估(鉴定)成本Cost, external failure 外部失败成本Cost, internal failure 内部失败成本Cost, life cycle 寿命周期成本Cost, logistic 后续成本Cost, prevention 预防成本Cost, quality 质量成本Cost, quality control 质量治理成本Cost, rework 重加工成本Cost effectiveness 成本效益Cost function 成本机能Cost model for reliability optimization 可靠度最佳化成本模式Cost reduction 成本减低Count (Countable) data 点计数据Counter variation 反行变异Co-variation 共变异Covariance 共变异数,共变数Covariance analysis 共变异数分析Covariance matrix 共变异矩阵Craps, game of 掷骰游戏Credibility 信用Creep failure 潜变失效,潜变故障Crest 峰Criteria for workmanship 工作技艺准则Criterion 准则,规范Criterion, acceptance 验收准则(规范)Critical component control 重要组件管制Critical defect 严峻缺点Critical defective 严峻不良品Critical design review 关键设计审查Critical failure 关键故障,严峻失效Critical items 关键品目,重要件Critical path 要径Critical path analysis 要径分析法Critical region 临界区域,弃却区域,判定区Critical value 临界值,判定值Criticality 严峻性,关键性Cross 交叉Cross check 互校Cross classification 交叉分类Cross correlation 交叉相关Cross formula 交互公式Cross-hatch 交叉线Cross-hatched map 交叉图Cross-over design 交叉打算Crossed design 交叉法Crude mode 概括众数Crude moment 概括动差Cubic chart (diagram) 立方图Culled 检选Cumulant 累积数Cumulation, downward 向下累积Cumulation, total 全部累积Cumulation, upward 向上累积Cumulation average chart 累积平均数(管制)图Cumulative curve 累积曲线Cumulative curve chart 累积曲线图Cumulative damage 累积损坏Cumulative distribution (Ogive) 累积分配(布)Cumulative distribution function 累积分配(布)函数Cumulative error 累积误差Cumulative failure frequency 累积故障次数,累积失效次数Cumulative frequency 累积次数Cumulative frequency arrangement 累积次数排列Cumulative frequency curve 累积次数曲线Cumulative frequency 累积次数曲线图Cumulative frequency distribution 累积次数分配(布)Cumulative frequency polygon 累积(次数)多边形Cumulative frequency (probability) function 累积次数(机率)函数Cumulative frequency table 累积次数表Cumulative function 累积函数Cumulative graph 累积图Cumulative hazard function 累积冒险函数Cumulative mean 累积平均数Cumulative normal distribution 累积常态分配Cumulative number of failures 累积失效数,累积故障数Cumulative percentage of failures 累积失效百分率,累积故障百分率Cumulative probability distribution 累积机率分配(布)Cumulative sum 累积和Cumulative sum chart 累积和(管制)图Cumulative sum control chart 累积和管制图Cumulative terms 累积项Curtailed (Truncated) inspection 截略检验Curtailed (Truncated) sample inspection截略样品检验Curtailed sampling 截略抽样Curtailed sampling inspection 截略抽样检验Curtaijed sampling plan 截略抽样打算Curtailment of sampling plan 抽样打算之截略Curve 曲线Curve, frequency 次数曲线Curve, normal 常态曲线Curve chart (diagram) 曲线图Curve fitting 曲线配合Curve of error 误差曲线Curve of means 平均数曲线Curve of probability 机率曲线Curve type criterion 曲线型准则Curve shape 曲线形状Curvilinear correlation 曲线相关Curvilinear regression 曲线回来Curvilinear trend 曲线趋势Curvilinearity 曲线性Customer 客户,顾客Customer complaint 顾客埋怨Customer feedback information 顾客回馈信息Customer incurred cost 顾客引发成本Customer operation cost 顾客作业成本Customer repair cost 顾客修理成本Customer requirement 顾客要求Customer satisfaction 顾客中意度Customer's need 顾客需要Cusum chart 累积和(管制)图Cycles 周期Cycles between failures 失效间隔周期,故障间隔周期Cycle of operation 操作周期Cyclic curve 周期(循环)曲线Cyclic damage 周期性损坏Cyclic load 周期性负荷Cyclical deviation 周期(循环)离差Cyclical fluctuation 周期波动Cyclical trend 周期趋势Cyclical movement 周期移动Cyclical variation 周期变异Cycling failure rate 周期性失效率,周期性故障率DD chart d管制图Data 数据Data analysis 数据分析Data bank 资料室(库)Data exchange program 数据交换打算Data, inspection 检验数据Data item 数据项,文件项目Data processing 数据处理Death rate 死亡率Debug (debugging) 除错Decile 十分位数Decimal fraction 小数Decision function 决策函数Decision line 决定线Decision making 决策Decision variable 决策变数Decreasing failure rate distribution 递减失效率分配(布)Decrement 减量Decrement rate 减率Defect 疵病,缺点Defect, chronic 慢性缺点Defect, critical 严峻缺点Defect, incidental 偶发缺点Defect, major 要紧缺点Defect, minor 次要缺点Defect, sporadic 突发缺点Defect and failure analysis 缺点与失效分析Defect chart 缺点数(管制)图Defect Free 零缺点Defect prevention 缺点预防Defects, number of 缺点数Defects classification 缺点分类Defects per hundred units (dphu) 百件缺点数Defects per unit chart 每单位(内)缺点数(管制)图Defects per unit plan 每单位(内)缺点数(管制)打算Defective 不良品Defective, fraction 不良率Defective chart 不良品数(管制)图Defective material 不良材料Defective number 不良品数Defective part 不良零件Defective parts, percentage of 不良零件百分率Defective prevention 不良品预防Defective unit 不良品(单位)Defectives, number of 不良(品)数Defectives classification 不良品分类Definition(s) 定义Deflated series 调剂数列Deflated value 调剂值Deflating index 调剂指数Degradation 劣化Degradation failure 劣化故障,劣化失效Degree of accuracy 准确度Degree of approximation 近似度Degree of association 相联度Degree of confidence 信任(赖)度Degree of contribution 奉献度Degree of freedom (DF) 自由度Degree of reliability 可靠度Delivery 交货,出厂Delivery inspection 出厂检验Delivery qulaity 出厂品质Delivery time 运送时刻Demerit 减点Demerit chart 减点(数)(管制)图Demerit rating 减点评比Demerits per unit 每单位(内)减点数Demonstration 示范,验证,展现Demonstration test 验证试验,展现试验Density function 密度函数Dependability 可恃性,相依性,依靠性Dependent factor 因变因子Dependent failure 相依失效,相依故障Dependent variable 因变数Derating 降等,额降,减额定Derivation 导出Derived table 导出表Descriptive item 说明项Descriptive statistics 记述统计(学)Design 设计Design baseline 设计准则Design change 设计变更Design considerations 设计考虑Design control 设计管制Design change control 设计变更管制Design control, new 新设计管制Design criterion 设计准则Design disclosure package 设计启导文件Design effect cost 设计效应成本Design freeze 设计冻结Design in 设计到里面去Design input 设计输入Design matrix 设计矩阵Design output 设计输出Design of experiment 实验打算Design planning 设计规画Design profile 设计轮廓Design proving 设计认可Design qualification 设计之合格性Design release 设计公布Design requalification 设计合格之再认定Design review 设计审查Design specification 设计规格Design validation 设计确认Design verification 设计验证,查证Design verification test 设计验证试验Designation 名称Designed experiment 实验打算Destructive inspection (test) 破坏性检验(试验)Detailed design 细部设计Detailed design review 细部设计审查Detailed inspection (100% inspection) 全数检验(百分之百检验)Detect 侦测Detection of a failure unit 失效单位之检测,故障单位之检测Detection time 检测时刻Deterioration 衰变,劣化Determination, coefficient of 定限系数Development 进展Development test 进展试验Deviation 离差。
质量人的常用中英文词汇(术语类)-原创培训资料
质量人的常用中英文词汇(术语类)必须掌握的词汇ISO:International Standard Organization 国际标准化组织QM:Quality Manual质量手册QP:Quality Policy 质量方针QS:Quality System 质量系统QSA:Quality System Assessment/Audit 质量体系评定/审核QMS:Quality Management Systems质量管理体系TQC: Total Quality Control 全面质量管理QFD:Quality Function Deployment质量功能展开QI:Quality Improvement 质量改善QIT:Quality Improvement Team 质量改善小组QP-QC-QI:质量三步曲,质量计划-质量控制-质量改进CIP: Continue Improvement Program 持续改善项目QC Tools:Quality Control Tools 质量管理工具SQC: Statistical Quality Control 统计质量管理SPC: Statistical Process Control 统计制程管制Plato Diagram: 柏拉图Control Chart: 管制图PDCA:Plan、Do、Check、Action 策划、实施、检查、处理PPAP:Production Part Approval Process生产件批准程序APQP:Advanced Product Quality Planning产品质量先期策划FMEA:Potential Failure Model and Effects Analysis 潜在失效模式及后果分析MSA:Measurement System Analysis 测量系统分析(Q)CP:(Quality) Control Plan (质量)控制计划CPK:Complex Process Capability index过程能力指数QC:Quality Control 质量控制QCC: Quality Control Circle 质量圈(质量小组)QC:Quality Control 质量管理(部门)QE: Quality Engineer 质量工程师QE: Quality Engineering 质量工程(部门)QA:Quality Assurance 质量保证QA Quality Assurance 质量保证(部门)IS:Inspection Specification 检验规范QAF:Quality Assurance File质量保证文件QAP:Quality Assurance Plan质量保证计划SIP:Standard Inspection Procedure 标准检验程序(规范)SOP:Standard Operation Procedure 标准作业程序(规范)AQL: Acceptable Quality Level 允收质量水平ACC: Accept 允收REE: Reject 拒收CR: Critical 极严重的MAJ: Major 主要的MIN: Minor 轻微的P/N:Part Number 料号L/N:Lot Number 批号LRR: Lot Reject Rate 批退率PPM:Parts Per Million 每百万有多少数量DPPM: Defect Percent Per Million 每百万不合格数IQC:Incoming Quality Control 来料质量控制IPQC:Input process Quality Control 过程质量控制FQC:Final Quality Control 成品质量量控制OQC:Outgoing Quality Control 出货质量控制SI: Site Inspection 驻厂客验SQA: Source(Supplier) Quality Assurance 供应商质量保证(VQA)SQE: Source(Supplier) Quality Engineer 供应商质量工程师SQM: Source(Supplier) Quality Management 供应商质量管理PQA:Process Quality Assurance 制程质量保证PQE:Process Quality Engineer 制程质量工程师CQA:Customer Quality Assurance客户质量保证CQE:Customer Quality Engineer客户质量工程师CS:Customer Service 客户服务FAI: First Article Inspection 正式生产前的首件检查FAA: First Article Assurance 首件确认4M1E:Man、Machine、Material、Method、Environment人、机、料、法、环5W1H:Why、What、Who、When、Where、How 为何/做什么/谁做/时间/地点/如何做6S:Seiri、Seiton、Seiso、Seiketsu、Shitsuke、Safety 整理、整顿、清扫、清洁、素养、安全8D: Eight Disciplines Problem Solving 团队导向的问题解决方法或8D reportMTBF:Mean Time Between Failure 平均故障间隔D/C:Date Code 生产日期码BOM:Bill Of Material 物料清单PO:Purchasing Order 采购订单DIM: Dimension 尺寸DIA: Diameter 直径N: Number 样品数MAX:Maximum 最大值MIN:Minimum 最小值RMA: Return Material Authorization 客户退回维修SPEC:Specification 规格DWG:Drawing 图纸PCB: Printed Circuit Board 印刷电路板NA: Not Applicable 不适用NG:Not Good 不行,不合格PCS:Pieces 个(根,台等),为复数(单数使用PC)其他常用词汇NPI: New Product Introduction 新产品导入CE: Component Engineer 零件工程师EE: Equipment/Electronics Engineer 设备/电子工程师ME: Manufacturing/Mechanical engineer 制造/机械工程师TE: Testing Engineer 测试工程师R&D: Research & Design 设计开发部PE:Process/Product Engineer 制程/产品工程师IE:Industrial Engineer 工业工程师ADM: Administration Department行政部PMC: Production Material Control 生产物料管理LAB: Laboratory实验室DOE: Design of Experiments 实验设计HR: H uman Resources 人资(部门)W/H: Warehouse仓库(部门)SMT: Surface Mounted Technology 表面贴装技术MFG: Manufacturing 制造(部门)MIS: Material Information System 物料管理系统DCC: Document Control Center 文件管制中心ECR: Engineering Change Request 工程变更请求ECN:Engineering Change Notice 工程变更通知AC: Alternating Current 交流电DC: Direct Current 直流电SWOT: Strength,Weakness,Opportunity,Threat 优势,弱点,机会,威胁ATE: Automatic Test Equipment 自动测试设备CAD:Computer Aided Design 计算机辅助设计OEE:Overall Equipment Effectiveness 设备总效率FIFO:First in, First out先进先出TCQ:Time、Cost、Quality时间、成本、质量PFC:Process Flow Chart 过程流程图JIT:Just In Time 零库存或准时(交货)ERP:Enterprise Requirement Planning企业需求计划L/T: Lead Time 交期。
质量管理术语English-Chinese
质量管理术语English Chinesereceipt (入厂)接受,验收,进货handling 搬运packaging 包装storage 保存protection 保护comparison 比较identification 标识replacement of identification mark 标识标志更换maintenance of identification 标识的保持records of identification control 标识控制记录tender 标书normative document 标准文件supplemental 补充nonconforming product 不合格品control of nonconforming product 不合格品控制control procedure of nonconforming products 不合格品控制程序tendency of nonconformance 不合格倾向purchasing 采购verification of purchased product 采购的产品验证purchasing process 采购过程purchasing control procedure 采购控制程序purchasing information 采购信息reference standard 参照标准reference instructions 参照细则stockhouse 仓库measurement, analysis and improvement 测量,分析和改进measurement result 测量结果control procedure of monitoring and measuring devices 测量设备控制程序planning 策划preservation of product 产品保护control procedure for maintenance, replacement and records of product identification 产品标识的保持, 更换及记录控制程序procedure for product identification and traceability 产品标识和可追溯性程序conformity of product 产品的符合性monitoring and measurement of product 产品的监督和测量product plan 产品方案control procedure for product preservation 产品防护控制程序method of product release 产品放行方法conformity of product,product conformity 产品符合性product realization 产品实现planning of product realization 产品实现策划product characteristics 产品特性input to product requirements 产品要求的输入product status 产品状态final acceptance of product 产品最后验收procedure 程序program documents 程序文件continual improvement 持续改进procedure for continual improvement of quality management system 持续改进质量体系程序adequacy 充分性storage location 存放地点agency personnel 代理人员submission of tenders 递交标书adjustment 调整,调节statutory and regulatory requirements 法律法规要求rework, vt 返工repair, vt 返修subcontractor 分承包方annex 附录improvement 改进improvement actions 改进措施on—the-job training 岗位技能培训responsibility of individual department and post 各部门,各岗位职责change identification 更改标记change order number 更改单编号process sheets 工艺单process specification 工艺规程procedure(process card) 工艺规程(工艺卡)process characteristics 工艺特性Job Description Format 工种描述单work environment 工作环境impartiality 公正性functional requirements 功能要求supplier 供方supplier evaluation procedure 供方评价程序supplier provided special processes 供方提供的特殊过程verification at supplier's premises 供方现场验证supply chain 供应链criteria for supplier selection, evaluation and re—evaluation 供应商选择、评估和再评估准则communication 沟通customer 顾客customer property 顾客财产control procedure for customer property 顾客财产控制程序customer feedback 顾客反馈Customer Service Contact Form 顾客服务联系表customer communications顾客沟通customer satisfaction 顾客满意statistical analysis of customer satisfaction 顾客满意度统计分析customer complaint 顾客投诉identification of customer requirements 顾客要求的识别management review 管理评审records from management review 管理评审记录management review control procedure 管理评审控制程序management representative 管理者代表management responsibility 管理职责specified limits of acceptability 规定的可接受界限specified use 规定的用途process 过程complexity of processes 过程的复杂性monitoring and measurement of processes 过程的监视和测量operation of process 过程的运行status of processes 过程的状态process approach 过程方法process controls 过程控制process control documents 过程控制文件process performance 过程业绩appropriateness 合适性changes to contractor 合同的更改contract review control procedure 合同评审控制程序internet sales 互联网销售environmental conditions 环境条件monogram program requirements 会标纲要要求type of activities 活动类型infrastructure 基础建设infrastructure 基础设施fundamentals and vocabulary 基础与词汇control of records 记录控制technical specification技术规范process trace sheet 加工跟踪单monitoring and measurement 监视和测量monitoring and measuring device 监视和测量装置control of monitoring and measuring devices 监视和测量装置控制check method 检查方法frequency of checks 检查频次calibration status 检定状态inspection and test control procedure 检验和试验控制程序identification procedure for inspection and test status 检验和试验状态标识程序inspection witness point 检验见证点inspection hold point 检验停止点buildings 建筑物delivery 交付post—delivery activities 交付后的活动delivery activities 交付活动interface 接口acceptance of contract or orders 接受合同或定单type of medium 介质类型experience 经验correction action 纠正措施Corrective action response time 纠正措施答复时间,纠正措施响应时间management procedure for corrective actions 纠正措施管理程序corrective action response times 纠正措施响应时间development activity 开发活动traceability mark 可追溯性标志objectivity 客观性Customer Service Log 客户服务记录簿control feature 控制特性,控制细节control features 控制细则periodic assessment of stock 库存定期评估justification 理由routine 例程,惯例,常规质量职能分配表论证范围internal communication 内部沟通internal audit 内部审核internal audit procedure 内部审核程序internally controlled standard 内控标准internal audit 内审results of internal and external audits 内外部审核结果competence 能力training 培训training needs 培训需要evaluate 评价records of the results of the review 评审结果的记录review output 评审输出review input 评审输入Purchase Requisition 请购单authority 权限validation 确认concession 让步human resources 人力资源job training of personnel 人员岗位培训qualification of personnel 人员资格equipment control procedure 设备控制程序device type 设备类型order of design changes 设计更改通知单design and development control procedure 设计和开发控制程序design and development 设计开发design and development planning 设计开发策划control of design and development changes 设计开发更改控制design and development review 设计开发评审design and development validation 设计开发确认design and development outputs 设计开发输出design and development inputs 设计开发输入design and development verification 设计开发验证design validation 设计确认design documentation 设计文件编制design acceptance criteria 设计验收准则design verification 设计验证audit program 审核大纲conduct of audits 审核行为audit criteria 审核准则production process control 生产过程控制production process control procedure 生产过程控制程序production and service provision 生产和服务提供control of production and service provision 生产和服务提供的控制validation of processes for production and service provision 生产和服务提供过程的确认production order 生产令identification and traceability 识别和可追溯性identification and traceability maintenance and replacement 识别和可追溯性维护与替换invalidate 使失效market survey 市场调研suitability 适宜性scope 适用范围controlled condition 受控状态terms and definitions 术语与定义analysis of data 数据分析sequence 顺序transfer of ownership 所有权转移system document 体系文件statistical technique 统计方法outsource(vt)a process 外包过程external source 外部来源documents of external origin 外来文件outsource, vt 外协unique identification 唯一的标识maintenance 维护Document Change Control 文件更改控制Request For Document Change (RDC) 文件更改需求单control of documents 文件控制documentation requirements 文件要求enquiry 问询,询价field nonconformity analysis 现场不符合分析relevance 相关性interaction 相互作用detail design 详细设计,详图设计,零件设计,施工设计sales department 销售部sales contract 销售合同checklist 校验表,一览表,检查一览表calibration 校准submission of action plans 行动计划的递交documented procedures 形成文件的程序documented statement 形成文件的声明performance requirements 性能要求licensee responsibilities 许可证持有者责任acceptance criteria 验收准则verification arrangement 验证安排verification results 验证结果customer focus 以客户为关注点,以客户为焦点awareness 意识introduction 引言,概述,介绍normative references 引用标准application 应用visit to user 用户访问review of requirements related to the product 有关产品的要求评审competent 有能力的effectiveness 有效性determination of requirements related to the product 与产品有关的要求的确定customer—related processes 与顾客有关的过程preventive action 预防措施management procedure for preventive actions 预防措施管理程序planned results 预期的结果intended use 预期的用途procedure for competence,knowledge and training of personnel 员工能力,知识和培训程序personnel training procedure 员工培训程序supporting services 支持性服务functions 职能部门responsibility 职责assignment of responsibility 职责分工workmanship 制造工艺manufacturing acceptance criteria 制造验收准则quality policy 质量方针quality programs 质量纲领quality management system 质量管理体系quality management system planning 质量管理体系策划performance of the quality management system 质量管理体系业绩quality plan 质量计划quality records 质量记录quality objectives 质量目标quality audit 质量审核quality manual 质量手册quality problem handling form 质量问题处理单quality requirements 质量要求allocation table of quality responsibilities 质量职能分配表availability of resources 资源的可获得性resource management 资源管理allocation of resources 资源配置provision of resources 资源提供general requirements 总要求,一般要求constituent part 组成部件organization 组织continual improvement of the organization 组织的持续改进size of organization 组织的规模Organizational Diagram 组织机构图final acceptance 最终验收work instructions 作业指导书。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
品质名词(中英对照)AABC analysis ABC 分析Abnormality 不正常性Abscissa 横坐标Absolute deviation 绝对离差Absolute dispersion 绝对离势Absolute error 绝对误差Absolute frequency 绝对次数Absolute number 绝对数Absolute reliability 绝对可靠度Absolute term 绝对项Absolute value 绝对值Absolute variation 绝对变异Abstract number 抽象数Abstract unit 抽象单位Accelerated factor 加速系数,加速因子Accelerated life test 加速寿命试验Accelerated test 加速试验Acceleration 加速度Acceptable limit 允收界限Acceptable process 允收制程水平Acceptable quality 允收品质Acceptable quality level (AQL) 允收质量水平Acceptable reliability level (ARL) 允收可靠度水平Acceptability 允收性Acceptability criterion 允收标准Acceptance 允收,验收Acceptance, probability of 允收机率Acceptance, region of 允收区域Acceptance and rejection criteria 允收与拒收准则Acceptance boundary 允收界限Acceptance coefficient 允收系数Acceptance control chart 验收管制图Acceptance cost 验收费用Acceptance criteria 允收准则Acceptance error 允收误差Acceptance inspection 验收检验Acceptance limit 允收界限Acceptance line 允收线Acceptance number 允收(不良品)数Acceptance plan 验收计划Acceptance procedure 验收程序Acceptance/rectification scheme 允收/精选方案Acceptance sampling, attribute 计数值验收抽样Acceptance sampling, variable 计量值验收抽样Acceptance sampling plan 验收抽样计划Acceptance sampling scheme 验收抽样方案Acceptance test 验收试验Acceptance value 允收值Acceptance zone 允收区域Acceptance product 允收品Accepting lot 允收批Access time 接近时间,故障诊断时间Accessibility 可接近性Accident rate 意外率Accidental error 偶误,偶然误差Accidental fluctuation 偶然波动Accidental movement 意外移动Accounting test 验算(决算)试验Accumulated operating time 累积操作时间Accuracy 准确度Accuracy of data 数据准确度Accuracy of estimation 估计准确度Accuracy of the mean 平均数准确度Achieved availability 实际可用度Action 行动,措施Action, corrective 矫正行动(措施)Action control chart 行动管制图Action limit 行动界限Active line 行动线Active maintenance time 实际维护时间Active parallel redundancy 主动并复联(置)Active preventive maintenance 现行预防维护时间Active redundancy 主动复联(置)Active repair time 实际修复时间Active standby 主动备用Active time 运用时间Actual frequency 实际次数Actual limit 实际界限Actual range 实际全距Actual value 实际值Adaptability 可适应性Adaptive control 修改管制Addition theorem 加法定理Additivity 加法性,可加性Adjusted average 修正平均数Adjusted value 修正值Adjustment factor 调整系数Administration time for a repair 修复之管理时间Administrative time 管理时间Adopted value 采用值Advisory Group on Reliability of Electronic Equipment (AGREE) 电子装备可靠度顾问团Aeronautical Radio, Incorporated (ARINC) 航空无线电公司After-sales service 售后服务Age 年限Age at death 死亡年限Age at failure 失效年限Age-based maintenance 年限基准维护Aggregative method 综合法Aging 老化Agreement of quality assurance 质量保证之协议Agreement on verification method 验(查)证方法之协议Alarm signals 警告(报)讯号Alert time 待命时间Algebraic sum 代数和Algorism (Algorithm) 阿拉伯数字计数法Alias 假名Alienation 余相关Alignment chart 列线图Allocation 配当Allocation of reliability 可靠度配当Allowable percent defective (Acceptable quality level, AQL) 允收不良率(允收质量水平)Allowance 允差,裕度Alternative hypothesis 对立假设American Management Association (AMA) 美国管理协会American National Standards Institute (ANSI) 美国标准协会American Society for Quality Control (ASQC) 美国质量管理学会American Society for Mechanical Engineers (ASME) 美国机械工程师学会American Society for Testing and Materials (ASTM) 美国材料试验学会American Standard Association (ASA) 美国标准协会American Statistical Association (ASA) 美国统计协会American War Standards (AWS) 美国战时标准Ambient condition 周遭条件Analysis, sequential 逐次分析Analysis by accumulated frequency 累积法,累积次数分析Analysis by non-accumulated frequency 次数法,非累积次数分析Analysis of correlation 相关分析Analysis of covariance 共变异数分析Analysis of means (AVON) 平均数分析Analysis of problem 问题之分析Analysis of variance (ANOVA) 变异数分析Analysis sample 分析样本Analytical error 分析误差Angular transformation 角度转(变)换Anti-logarithm 逆对数Anti-mode 逆众数AOQL Sampling Table 平均出厂质量界限抽样数Applicability 应用性Applied statistics 应用统计学Apportionment of reliability 可靠度配当Apportionment techniques 配当技术Appraisal cost 鉴定成本,评估成本Appraisal system 评估制度Appraisal of quality 质量评估Approach to sequential testing 逐次试验法Approval of processes and equipment 核准制程与设备Approximate mode 近似众数Approximate number 近似数值Approximation 近似法,概算AQL (Acceptable quality level) 允收(质量)水平Arbitrary average (Assumed average,Arbitrary mean) 假定平均数Arbitrary origin 假定原点Arbitrary scale 假定标度Area bar chart 面积条图Area chart (diagram, graph) 面积图Area sampling 地区抽样Arithmetic average 算术平均数Arithmetic cross 算术交叉Arithmetic graph 算术图Arithmetic line chart 算术线图Arithmetic mean 算术平均数Arithmetic paper 算术纸Arithmetic probability paper 算术机率纸Arithmetic progression (Arithmetic series) 算术级数,等差级数Arithmetic scale 算术标度,等差标度Arithmetic series 算术级数,等差级数Army Ordnance Table 陆军兵工署(抽样)表Army Service Forces Table 陆军(抽样)表序列Array 序列Array distribution 序列分配(布)Array of data 数据序列Assemble 装配(组立)Assembled product 装配品Assembly 装配件Assembly inspection 装配检验Assembly quality analysis report 装配质量分析报告Assessed failure rate 评估失效率Assessed mean active -maintenance time 评估时间现行维护时间Assessed mean life 评估平均寿命Assessed mean time between failures 评估平均失效间格时间Assessed mean time to failure 评估平均失效前时间Assessed reliability 评估可靠度Assessed value 评估值Assessment of subcontractor 分包商之评鉴Assignable cause (Special cause) 非机遇原因(特殊原因)Assignable variation 非机遇变异Associated dependent variable 相联因变数Associated variate 相联变量Association coefficient 相联系数Association of attribute 品性相联Association table 相联表,联合表Assumed mean (Assumed average,Arbitrary average) 假定平均数Assumed median 假定中位数Assumed origin 假定原点Assurance quality 保证质量Assurance function 保证功能Asymmetrical distribution 不对称分配(布)Asymmetry 不对称Asymptotic distribution 趋近分配(布)At random 随机Attribute 计数值,属性Attribute classification 品性分类Attribute data 计数数据Attribute inspection 计数值检验Attribute sampling 计数值抽样Attribute sampling plan 计数值抽样计划Attribute testing (Go no-go testing) 计数值试验(通过与不通过试验)Attribute value 计数值Audit 稽核Audit for reliability 可靠度稽核Audit of decision 稽核决策Audit plan 稽核计划Audit report 稽核报告Auditing report 稽核报告Auto-correlation 自动相关Automatic switch-over redundancy 自动切换复联(置)Automatic test equipment (Am) 自动试验装备Auto-regression 自动回归Availability 可用性,可用度Average (Mean) 平均数,平均值Average, grand 总平均Average, moving 移动平均数Average, sample 样本平均数Average, standard error of 标准误平均数Average, universe 群体平均数Average, weighted 加权平均数Average amount of inspection 平均检验数Average and range chart 平均数及全距(管制)图Average availability 平均可用度Average deviation (A.D.) (Mean deviation) 平均差Average error (Mean error) 平均误差Average number of defects 平均缺点数Average of ratios 比例平均数Average outgoing quality (AOQ) 平均出厂质量Average outgoing quality curve 平均出厂质量曲线Average outgoing quality level 平均出厂质量水平Average outgoing quality limit (AOQL) 平均出厂水平Average quality level 平均出厂质量界限Average quality level line 质量平均线Average quality protection 平均质量保护Average range 平均全距Average run length (ARL) 平均连串长度Average sample number (ASN) 平均样品数Average range 平均全距Average run length (ARL) 平均连串长度Average sample number(ASN) 平均样本数Average sample number curve 平均样本曲线Average sample size (ASS) 平均样本大小Average sample size curve 平均样本大小曲线Average sample 平均抽样Average total inspection (ATI) 平均总检验(件)数Average total inspection curve 平均总检验数曲线Average value 平均值Avoidable cause 可避免之原因Avoidable quality cost 可避免之质量成本Axiom 公理Axis 轴Axis of abscissa 横轴Axis of ordinate 纵轴BBad lot 坏批Balance frequency 平衡次数Balanced complete type 平衡完备型Balanced design 平衡设计Balanced experiment 平衡实验Balanced incomplete type 平衡不完备型Balanced sample 平衡样本Band chart 带形图Band curve chart 带形曲线图Bank of reliability data 可靠度数据库Bar chart (diagram) 条(形)图Bartlett's test 巴特莱特试验Base line 基线Base number 基数Base period 基期Base point 基点Basic reliability 基本可靠度Batch (Lot) 批Batch of material 材料批Batch process 分批制造方法Batch size 批量Batch testing 批试验Bathtub curve 浴缸曲线Bathtub failure curve 浴缸失效曲线Bayes' estimator 贝式估计式Bayes' theorem 贝式定理Bayesian approach 贝式法Bayesian approcah to design 贝式设计法Bayesian estimation 贝式估计Bead map 标珠图Bell-shaped curve 钟形曲线Bell-shaped distribution 钟形分配(布)Bell-shaped failure pattern 钟形失效型态JBell System 贝尔系统Bell Telephone Laboratories 贝尔电话实验室Bell Telephone Laboratories Sampling Table 贝尔(电话实验室)抽样表Benign failure 无危险的失效Bernoulli distribution 白努利分配(布)Best fit 最适配合Best fitting line 最适线Best fitting curve 最适曲线Best linear invariant estimator 最佳线型不变估计式Best linear unbiased estimator 最佳线型不偏估计式Beta coefficient β系数Beta distribution β分配(布)Beta function β函数Between-class variance 组间变异数Between-column variance 组间变异Between-column variation 行间变异Between-row variation 列间变异Between sample variation 样本间变异Bias 偏差Bias, downward 向下偏差Bias, downward type 向下型偏差Bias, upward 向上偏差Bias, upward type 向上型偏差Biased error 偏误Biased estimate 偏差估计Biased sample 偏差样本Biased test 偏差试验Bilateral 双边Bill of material (BOM) 物料清单Bimodal 双峰Bimodal curve 双峰曲线Bimodal distribution 双峰分配(布)Bimodal redundancy 双峰型复联(置)Bimodality 双峰性Binary system 二元制Binomial, skewed 偏态二项Binomial coefficient 二项系数Binomial curve 二项曲线Binomial distribution 二项分配(布)Binomial equation 二项方程式Binomial expansion 二项展开式Binomial population 二项群体Binomial probability distribution 二项机率分配(布)Binomial probability paper(BIPP) 二项机率纸Binomial series 二项级数Binomial theorem 二项定理Bi-serial 双数列Biserial correlation 双数列相关Biserial coefficient of correlation 双数列相关系数Biserial ratio of correlation 双数列相关比Bivariate 双变量Bivariate distribution 双变量分配(布)Bivariate frequency distribution 双变量次数分配(布)Bivariate normal distribution 双变量常态分配(布)Blend 混,混合Block 量块,(实验)区,方块Block design 实验区设计Block diagram 方块图Block factor 地区因素Block in series 串联方块Boundary 界Boundary, cell 组界Bowker-Goode variables plan Bowker-Goode 记量值(抽样)计划Bowl drawing 碗珠抽样Bowl experiment 碗珠实验Bowl test 碗珠试验Bowley's coefficient of skewness Bowley偏态系数Bowley's formula Bowley公式Bureau of Ordnance, U.S. Navy 美国海军兵工署Break-even chart 损益平衡图Break-even point (BEP) 损益平衡点Breakthrough 突破British Standards Institution 英国标准协会Broken curve 中断曲线Broken series 中断数列Broken trend 中断趋势Built-in test (BIT) 内含测试,自测Bureau of Commodity Inspection and Quarantine (BCIQ) 商品检验局Bulk sampling Burn-in 大宗抽样Business Process Management (BPM) 业务流程管理Buyer 买方,客户CC chart C(管制)图Calculated value (Computed value) 计算值Calculation chart 计算图Calendar time 日历时间Calibration 校正Calibration record 校正记录Camp-Meidell inequality Camp-Meidell不等式Capability 能力Capability, machine 机器能力Capability, process 制程能力Capability ratio 能力比Capacity 能量,容量Caption 纵标目Carrying out the audit 实施稽核Cartogram 统计图Case method 个案法Catastrophic failure 突然故障,崩坏失效,致命失效Category 类别Cauchy distribution Cauchy 分配(布)Causality 因果律Cause 原因Cause, assignable 非机遇原因Cause, avoidable 可避免原因Cause, chance 机遇原因Cause, common 共同原因Cause, findable 可寻找原因Cause, random 随机原因Cause, special 特殊原因Cause, substantial 本质原因Cause, unavoidable 不可避免原因Cause and effect 因果Cause and effect diagram 特性要因图Cell 组Cell boundary 组界Cell deviation (d) 组离差Cell frequency (f) 组次数Cell interval (i,h) 组距Cell limit 组限Cell method 分组法Cell mid-point (Xm) 组中点Cell value 组值Censored sample 检剔样本Censored test 检剔试验Censorship 检剔Census 普查Center line 中线Central inspection station 中央检验站Central limit theory 趋中理论,中央极限理论Central limit theorem 趋中理论,中央极限理论Central line (CL.) 中心线Central moment 中心动差Central ordinate 中纵坐标Central tendency 集中趋势Central value 中值,中心值Certainty 确定性Certified chart 验证图Certified equipment 合格设备Certified quality engineer (CQE) 合格质量工程师Certified quality technician (CQT) 合格质量技术师Certified reliability engineer (CRE) 合格可靠度工程师Certification 验证Chain model 炼结模型Chain reliability 炼结可靠度Chain sampling plan (CHSP) 炼结抽样计划Chance 机遇Chance cause 机遇原因Chance error (Probable error) 机遇误差,机误Chance factor 机遇因素Chance failure 机遇故障,机遇失效Chance failure period 机遇失效期Chance fluctuation 机遇波动Chance variable 机遇变数Chance variation 机遇变异Change control 改变(变更)管理Chaotic variation 混乱变异Characteristic (质量)特性Characteristic, qualitative 质的特性Characteristic, quantitative 量的特性Characteristic curve, operating (OC curve) 操作特性曲线,OC曲线Characteristic diagram 特性要因图Characteristic function 特性函数Characteristic life 特性寿命Characteristic operating curve (OC curve) 特性操作曲线(OC曲线)Characteristic value 特性值Chargeable failure 可计列失效,故障Charlier check Charlier 覆检法Chart 图,(管制)图Chart, acceptance control 验收管制图Chart, average and range 平均数及全距(管制)图Chart, average number of defects 平均缺点数(管制)图Chart, control 管制图Chart, cumulative sum 累积和(管制)图Chart, defects per unit 每单位内缺点数(管制)图Chart, fraction defective 不良率(管制)图Chart, group 多项(管制)图Chart, individual 个别值(管制)图Chart, median 中位数(管制)图Chart, moving and range 移动平均数及全距(管制)图Chart, moving range 移动全距(管制)图Chart, modified control limits 修正管制界限(管制)图Chart, multi-variation 变异值(管制)图Chart, multiple 复式(管制)图Chart, number defectives 不良(品)数(管制)图Chart, number of defects 缺点数(管制)图Chart, percent defective 不良率管制图Chart, range 全距(管制)图Chart, run 操作(记录)图Chart, shop 工厂(管制)图Chart, Shewhart control Shewhart 管制图Chart, two-way control 双向管制图Chebyshev's inequality Chebyshev 不等式Check inspection 复核检验Check sampling 复核检验员Check inspector 复核抽样Chi-square ,卡方Chi-square distribution 分配(布),卡方分配(布)Chi-square test 检定,卡方检定Chi-squared distribution 分配(布),卡方分配(布)Chip 小圆片Chronic defect 慢性缺点Chronological chart 时序图Chronological series 时序数列Class 组Class boundaries (True class limits)组界(真实组限)Class form 组形Class frequency (f) 组次数Class interval (i,h) 组距Class limit 组限Class mark 组标,中值Class mean 组平均数Class mid-point(Xm) 组中点Class mid-value 组中值Class of median 组中位数Class value 组值Classes, number of 组数Classification chart 分组,分类Classification frequency 分组次数Classification frequency series 分组次数数列Classification of defectives 不良品分类Classification of defects 缺点分类Classfication of failure 失效分类,故障分类Classification process 分组(方)法Clearance 间隙,余隙Cluster 集团Cluster sampling 集团抽样Cochran's test Cochran 检定Code 简化,代号Code letter 代字Coded unit 简化单位Coded value 简化值Coding 简化Coding rule 简化规则Coefficient 系数Coefficient, correlation 相关系数Coefficient of alienation 余相关系数Coefficient of association 相关系数Coefficient of binomial distribution 二项分配(布)系数Coefficient of colligation 束联系数Coefficient of contingency 列联系数Coefficient of correlation 相关系数Coefficient of determination (r2) 定限系数Coefficient of dispersion 离势系数Coefficient of kurtosis 峰度系数Coefficient of multiple correlation 复相关系数Coefficient of net correlation 净相关系数Coefficient of net regression 净回归系数Coefficient of non-determination 不定限系数Coefficient of part correlation 部份相关系数Coefficient of partial correlation 部份相关系数Coefficient of rank correlation 等级相关系数Coefficient of reliability 可靠度系数Coefficient of regression 回归系数Coefficient of skewness 偏态系数,偏斜系数Coefficient of variation (CV) 变异系数Cold standby 冷置系数Collective quality 集体品质Columbia sampling table Columbia 抽样计划Column (Column/Row) 行,纵行(行/列)Column head 标目Column diagram 直行图Combination 组合Combinational model 复合模型Combined environmental reliability test (CERT) 复合环境可靠度试验Combined failure 复合失效,复合故障Combined stress life test 复合应力寿命试验Commissioning 委制Commodity 商品Common cause (Chance cause) 共同原因(机遇原因)Company standard 公司标准Companys need 公司需要Company-wide quality control (CWQC) 全公司质量管理Comparability 可比性Comparable measure 可比量数Compensating error 补偿误差Compensating fluctuation 补偿波动Competing product 竞争产品Complete association 全相联Complete block design 完全区集法Complete confounding 完全交络Complete dissociation 全不相联Complete failure 完全故障,完全失效Completely randomized design 完全随机法Complaint 抱怨Complaint index 抱怨指标Completed product verification 成品验证Component 组件,组件Component bar chart 成份条图Component distiibution 组成份分配(布)Component part diagram 成份图Component ratio 成份比Component reliability 组件可靠度Component variance 成份变异数Components of variance 变异数成份Composite curve 复合曲线Composite design 复合法Composite hypothesis 复合假设,组合假设Composite unit 复合单位Compound distribution 复合分配(布)Compound event 复合事件Compound probability 复合机率Compounding technique 复合法Compressed limit 压缩界限Compressed limit gauging 压缩界限规则Computed value 计算值Concentric circle diagram 同心圆图Conception of limit 极限概念Conceptual design 概念设计Conceptual design review 概念设计审查Concession 特采,特认Concomitant factor 共变因素Concomitant variable 共变数Concomitant variation 共变异Concurrency 并行Condition maintenance 状态维护Condition monitoring 状态监督Condition-based maintenance 状态基准维护Conditional probability 条件机率Conditions of use 使用条件Confidence 信任,信赖Confidence coefficient 信任系数,信赖系数Confidence interval 信任区间,信赖区间Confidence in test results 试验结果的信赖度Confidence level 信任水平,信赖水平Confidence limit 信任界限,信赖界限Confidence range 信任全距,信赖全距Configuration control 型态管制Configuration items 型态件Configuration management 型态管理Confirmation 确认Conformance to the requirement 符合要求Conformation 一致Conforming article 合格品Conformity 符合Confounding 交络Confounding, complete 完全交络Confounding, partial 部份交络Connector 连接器Consignment 委托,寄售Consistency 一致性Constancy 恒久性Constancy of great numbers 大数恒久性Constant 常数Constant cause system 恒常原因系统Constant error 恒常误差Constant failure period 恒常失效期Constant failure rate dustribution 恒常失效率分配(布)Constant weight (Fixed weight) 固定权数Constraint 束缚Consultant 管理顾问师Consumer 消费者Consumer acceptance specification 消费者允收规格Consumerism 消费者主义Consumer's risk (CR) 消费者冒险率Consumer test panel 消费者试验小组Consumer preference 消费者偏好Consumer sensitivity test 消费者感官试验Contingency 列联Contingency coefficient 列联系数Contingency table 列联表Contingency theorem 列联理论Continuity correction 连续校正Continuous change 连续变更Continuous data 连续数据Continuous distribution 连续分配(布)Continuous production 连续生产Continuous sampling 连续抽样Continuous sampling plan (CSP) 连续抽样计划Continuous series 连续数列Continuous variable 连续变量Contract 合约Contract preparation 拟定合约Contract review 合约检讨Contract requirements 合约需求Contract requirements analysis 合约需求分析Contractors 合约商Contrast analysis 对照分析Control, in 在管制(状态)下Control, lack of 缺乏管制Control, out of 超出管制Control, state of 管制状态Control, under 在管制(状态)下Control chart 管制图Control chart, cumulative sum 累积和管制图Control chart, defects per unit 每单位内缺点数管制图Control chart, two-way 双向管制图Control chart factor 管制图系数Control chart for attribute 计数值管制图Control chart for variable (measurement) 计量值管制图Control chart method 管制图法Control chart pattern 管制图类型Control factor 管制因素Control gaging (gauging) 管制规测Control level 管制水平Control limit 管制界限Control limit, lower 管制下限Control limit, modified 修正管制界限Control limit, upper 管制上限Control limit factor 管制界限因子Control line 管制线Control of measuring and test equipment 量测与试验设备之管制Control of nonconforming material 不合格物料之管制Control of nonconforming product 不合格产品之管制Control of production 生产管制Control of reliability 可靠度管制Control of verification status 验证状况之管制Control plan 管制计划Control point 管制点Control station 管制站Control system 管制系统Controllability 可管制性Controlled process 管制制程Controlled state 管制状态Controlled variability 管制变异性Controlled variable 管制变数Controlling item 管制项目Convenience lot 合宜的批Convergence 收敛Cooked distribution 中断分配(布)Coordinate 坐标Coordinate axis 坐标轴Coordinate line 坐标线Coordination 协调Coordination for reliability 可靠度协调Correction 校正,修正Correction, Sheppard Sheppard 校正数Correction factor 修正因子Correction for continuity 连续校正Correction for mean 平均数校正Correction term 校正项Corrective action 矫正行动,改正措施Corrective maintenance 矫正维护,改正维护Corrective maintenance time 矫正维护时间,改正维护时间Corrective sorting 修正选别Correlated measure 相关量数Correlated samples 相关样本Correlation 相关Correlation, coefficient of 相关系数Correlation, direct 直接相关Correlation, index of 相关指数Correlation, inverse 反相关Correlation, multiple 复相关Correlation, negative 负相关Correlation, net 净相关Correlation, nonlinear 非线性相关Correlation, nonsense 无意义相关Correlation, part 部份相关,偏相关Correlation, partial 部份相关,偏相关Correlation, perfect 完全相关Correlation, rank 等级相关Correlation, serial 数序相关Correlation, simple 简相关Correlation, zero 零相关Correlation analysis 相关分析Correlation chart 相关图Correlation, coefficient 相关系数Correlation coefficient, rank 等级相关系数Correlation matrix 相关矩阵Correlation of attributes 品性相关Correlation ratio 相关比Correlation of x on y x与y的相关比Correlation ratio of y on x y与x的相关比Correlation scatter chart 相关散布图Correlation surface 相关面Correlation table 相关表Correlation theory 相关理论Correlogram 相关图Corrosive atmosphere 腐蚀性空气Cost 成本,费用Cost, acquisition 取得成本Cost, appraisal 评估(鉴定)成本Cost, external failure 外部失败成本Cost, internal failure 内部失败成本Cost, life cycle 寿命周期成本Cost, logistic 后续成本Cost, prevention 预防成本Cost, quality 质量成本Cost, quality control 质量管理成本Cost, rework 重加工成本Cost effectiveness 成本效益Cost function 成本机能Cost model for reliability optimization 可靠度最佳化成本模式Cost reduction 成本减低Count (Countable) data 点计数据Counter variation 反行变异Co-variation 共变异Covariance 共变异数,共变数Covariance analysis 共变异数分析Covariance matrix 共变异矩阵Craps, game of 掷骰游戏Credibility 信用Creep failure 潜变失效,潜变故障Crest 峰Criteria for workmanship 工作技艺准则Criterion 准则,规范Criterion, acceptance 验收准则(规范)Critical component control 重要组件管制Critical defect 严重缺点Critical defective 严重不良品Critical design review 关键设计审查Critical failure 关键故障,严重失效Critical items 关键品目,重要件Critical path 要径Critical path analysis 要径分析法Critical region 临界区域,弃却区域,判定区Critical value 临界值,判定值Criticality 严重性,关键性Cross 交叉Cross check 互校Cross classification 交叉分类Cross correlation 交叉相关Cross formula 交互公式Cross-hatch 交叉线Cross-hatched map 交叉图Cross-over design 交叉计划Crossed design 交叉法Crude mode 概括众数Crude moment 概括动差Cubic chart (diagram) 立方图Culled 检选Cumulant 累积数Cumulation, downward 向下累积Cumulation, total 全部累积Cumulation, upward 向上累积Cumulation average chart 累积平均数(管制)图Cumulative curve 累积曲线Cumulative curve chart 累积曲线图Cumulative damage 累积损坏Cumulative distribution (Ogive) 累积分配(布)Cumulative distribution function 累积分配(布)函数Cumulative error 累积误差Cumulative failure frequency 累积故障次数,累积失效次数Cumulative frequency 累积次数Cumulative frequency arrangement 累积次数排列Cumulative frequency curve 累积次数曲线Cumulative frequency 累积次数曲线图Cumulative frequency distribution 累积次数分配(布)Cumulative frequency polygon 累积(次数)多边形Cumulative frequency (probability) function 累积次数(机率)函数Cumulative frequency table 累积次数表Cumulative function 累积函数Cumulative graph 累积图Cumulative hazard function 累积冒险函数Cumulative mean 累积平均数Cumulative normal distribution 累积常态分配Cumulative number of failures 累积失效数,累积故障数Cumulative percentage of failures 累积失效百分率,累积故障百分率Cumulative probability distribution 累积机率分配(布)Cumulative sum 累积和Cumulative sum chart 累积和(管制)图Cumulative sum control chart 累积和管制图Cumulative terms 累积项Curtailed (Truncated) inspection 截略检验Curtailed (Truncated) sample inspection截略样品检验Curtailed sampling 截略抽样Curtailed sampling inspection 截略抽样检验Curtaijed sampling plan 截略抽样计划Curtailment of sampling plan 抽样计划之截略Curve 曲线Curve, frequency 次数曲线Curve, normal 常态曲线Curve chart (diagram) 曲线图Curve fitting 曲线配合Curve of error 误差曲线Curve of means 平均数曲线Curve of probability 机率曲线Curve type criterion 曲线型准则Curve shape 曲线形状Curvilinear correlation 曲线相关Curvilinear regression 曲线回归Curvilinear trend 曲线趋势Curvilinearity 曲线性Customer 客户,顾客Customer complaint 顾客抱怨Customer feedback information 顾客回馈信息Customer incurred cost 顾客引发成本Customer operation cost 顾客作业成本Customer repair cost 顾客修理成本Customer requirement 顾客要求Customer satisfaction 顾客满意度Customer's need 顾客需要Cusum chart 累积和(管制)图Cycles 周期Cycles between failures 失效间隔周期,故障间隔周期Cycle of operation 操作周期Cyclic curve 周期(循环)曲线Cyclic damage 周期性损坏Cyclic load 周期性负荷Cyclical deviation 周期(循环)离差Cyclical fluctuation 周期波动Cyclical trend 周期趋势Cyclical movement 周期移动Cyclical variation 周期变异Cycling failure rate 周期性失效率,周期性故障率DD chart d管制图Data 数据Data analysis 数据分析Data bank 资料室(库)Data exchange program 数据交换计划Data, inspection 检验数据Data item 数据项,文件项目Data processing 数据处理Death rate 死亡率Debug (debugging) 除错Decile 十分位数Decimal fraction 小数Decision function 决策函数Decision line 决定线Decision making 决策Decision variable 决策变数Decreasing failure rate distribution 递减失效率分配(布)Decrement 减量Decrement rate 减率Defect 疵病,缺点Defect, chronic 慢性缺点Defect, critical 严重缺点Defect, incidental 偶发缺点Defect, major 主要缺点Defect, minor 次要缺点Defect, sporadic 突发缺点Defect and failure analysis 缺点与失效分析Defect chart 缺点数(管制)图Defect Free 零缺点Defect prevention 缺点预防Defects, number of 缺点数Defects classification 缺点分类Defects per hundred units (dphu) 百件缺点数Defects per unit chart 每单位(内)缺点数(管制)图Defects per unit plan 每单位(内)缺点数(管制)计划Defective 不良品Defective, fraction 不良率Defective chart 不良品数(管制)图Defective material 不良材料Defective number 不良品数Defective part 不良零件Defective parts, percentage of 不良零件百分率Defective prevention 不良品预防Defective unit 不良品(单位)Defectives, number of 不良(品)数Defectives classification 不良品分类Definition(s) 定义Deflated series 调节数列Deflated value 调节值Deflating index 调节指数Degradation 劣化Degradation failure 劣化故障,劣化失效Degree of accuracy 准确度Degree of approximation 近似度Degree of association 相联度Degree of confidence 信任(赖)度Degree of contribution 贡献度Degree of freedom (DF) 自由度Degree of reliability 可靠度Delivery 交货,出厂Delivery inspection 出厂检验Delivery qulaity 出厂品质Delivery time 运送时间Demerit 减点Demerit chart 减点(数)(管制)图Demerit rating 减点评比Demerits per unit 每单位(内)减点数Demonstration 示范,验证,展现Demonstration test 验证试验,展现试验Density function 密度函数Dependability 可恃性,相依性,依赖性Dependent factor 因变因子Dependent failure 相依失效,相依故障Dependent variable 因变数Derating 降等,额降,减额定Derivation 导出Derived table 导出表Descriptive item 说明项Descriptive statistics 记述统计(学)Design 设计Design baseline 设计准则Design change 设计变更Design considerations 设计考虑Design control 设计管制Design change control 设计变更管制Design control, new 新设计管制Design criterion 设计准则Design disclosure package 设计启导文件Design effect cost 设计效应成本Design freeze 设计冻结Design in 设计进去Design input 设计输入Design matrix 设计矩阵Design output 设计输出Design of experiment 实验计划Design planning 设计规画Design profile 设计轮廓Design proving 设计认可Design qualification 设计之合格性Design release 设计发布Design requalification 设计合格之再认定Design review 设计审查Design specification 设计规格Design validation 设计确认Design verification 设计验证,查证Design verification test 设计验证试验Designation 名称Designed experiment 实验计划Destructive inspection (test) 破坏性检验(试验)Detailed design 细部设计Detailed design review 细部设计审查Detailed inspection (100% inspection) 全数检验(百分之百检验)Detect 侦测Detection of a failure unit 失效单位之检测,故障单位之检测Detection time 检测时间Deterioration 衰变,劣化Determination, coefficient of 定限系数Development 发展Development test 发展试验Deviation 离差Deviation, average 平均差Deviation, mean 平均差Deviation, root-mean-square 均方根差Deviation, sample standard 样本标准差Deviation, standard 标准差Deviation, universe standard 群体标准差Deviation permit 差异特许Deviation report 差异报告Diagnosis 诊断Diagnostic arm 诊断能力Diagonal distribution 对角分配(布)Diagram, bar 条(形)图Diagram, curve 曲线图Diagram, scatter 散布图Diagrammatic presentation (Graphic presentation) 图示Dice experiment 掷骰实验Dichotomy 二分法Dichotomy, double 双次二分法Dictogram 实体图Difference, significance of 差异之显著性Difference control chart 差异管制图Difference correlation 差异相关Difference method, t-test 差异之t检定Differential effect 差别效果Digit 数字。