Parker快换接头样本

合集下载

Parker插装阀样本-流量阀FCsection

Parker插装阀样本-流量阀FCsection

Catalog HY15-3502/USFlow Control Valves ContentsParker Hannifin CorporationFC1Flow Control ValvesCatalog HY15-3502/USTechnical TipsParker Hannifin CorporationINTRODUCTIONThis technical tips section is designed to help familiarize you with the Parker line of Flow Control Valves. In this section we present common options available as well as a brief synopsis of the operation and applications of the various product offered in this section. The intent of this section is to help you in selecting the best products for your application.Adjustment Types: Parker offers four primary types of adjustments for most of the flow control products.Samples of these types are shown below. Please note all options may not be available for all valves. Consult the individual catalog pages for more details.Screw Adjustment - Valve can be adjusted with an allen wrench. Lock nut included to maintain desired setting after adjustment. This is the most common adjustment option available on most Parker products.Knob Adjustment - An aluminum knob is added to the standard screw adjustment. A lock knob is provided to help maintain the desired setting after adjustment. Parker offers knob conversion kits for most flow control valves. For kit numbers consult the individual valve pages.Fixed Style - In most cases, the Fixed Style product is a screwadjustable product with a steel collet threaded over the adjustment.These valves are preset at the factory. Should the valve need to adjusted, the star washer andaluminum plate can be removed from the top of the assembly exposing the adjustment.Tamper Resistant - The tamper resistant option is a screw adjustable valve with a steel cap installed to con-ceal the adjustment. The cap is designed so the internal edges clamp into the groove of the valve adapter. Once the cap is installed, it cannot be removed without damaging the cap and the valve.When a valve is ordered with the tamper resistant option, it will be preset at the factory, and the cap will be included in a separate plastic bag to allow for fine tuning at the customer site. Parker offers tamper re-sistant cap conversion kits for most flow control valves.For kit numbers consult the individual valve pages.Seals: The Winner’s Circle products feature astandard 4301 Polyurethane “D”-Ring. The “D”-Ring eliminates the need for backup rings.The majority of the products are available in Nitrile or Fluorocarbon Seals. You should match the seal compatibility to the temperature and fluid being used in your application.Fine Meter Options: Fine meter needles are offered on some needle valve series. When this option isspecified, the standard needle is replaced by a slotted needle. The slotted needle restricts substantially more flow giving you finer control in the small flow ranges.Obviously, the maximum flow capacity of the needle valve is decreased with the fine meter option.Coarse NeedleFine NeedleCOMMON OPTIONSAs you will see, Parker offers a variety of Flow Control products. As such, some of the options mentioned below may not be available on all valve models. Consult the model coding and dimensions of each valve for specifics.Here are some of the common options available.Catalog HY15-3502/USFlow Control Valves Technical TipsParker Hannifin CorporationFC2FC3Flow Control ValvesCatalog HY15-3502/USTechnical TipsParker Hannifin CorporationCatalog HY15-3502/USFlow Control Valves Technical TipsParker Hannifin CorporationFC4Needle Valve Series J02A2Catalog HY15-3502/USFC5Parker Hannifin Corporation Technical InformationCatalog HY15-3502/USNeedle Valve Series J02A2FC6Parker Hannifin Corporation Technical InformationNeedle Valve Series NVH081Catalog HY15-3502/USFC7Parker Hannifin Corporation Technical InformationHardened, precision ground parts for durability Compact size for reduced space requirements Fine adjustment needle option available for precise Polyurethane “D”-Ring eliminates backup rings and Valve meters flow in either direction, but (2 to 1) is the preferred direction for lowest leakage at shut offCatalog HY15-3502/USNeedle Valve Series NVH081FC8Parker Hannifin Corporation Technical InformationNeedle Valve Series NVH101Catalog HY15-3502/USFC9Parker Hannifin Corporation Technical InformationPerformance CurvesFlow vs. Inlet Pressure Hardened, precision ground parts for durability Compact size for reduced space requirements Fine adjustment needle option available for precise Polyurethane “D”-Ring eliminates backup rings and Valve meters flow in either direction, but (2 to 1) is the preferred direction for lowest leakage at shut offCatalog HY15-3502/USNeedle Valve Series NVH101FC10Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationNeedle Valve Series J06A2Catalog HY15-3502/USFC11Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationCatalog HY15-3502/USNeedle Valve Series J06A2FC12Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationNeedle Valve Series J02B2Catalog HY15-3502/USFC13Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationCatalog HY15-3502/USNeedle Valve Series J02B2FC14Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationNeedle ValveSeries FV101 and FV102Catalog HY15-3502/USFC15Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationFree FlowMetered FlowCatalog HY15-3502/USNeedle ValveSeries FV101 and FV102FC16Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationP.C. Flow Control Valve Series J02E2Catalog HY15-3502/USFC17Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationCatalog HY15-3502/USP.C. Flow Control Valve Series J02E2FC18Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationFC19P.C. Flow Regulator Valve Series FR101Catalog HY15-3502/USParker Hannifin CorporationHydraulic Cartridge SystemsTechnical InformationAdjustable StyleSeries FR101Technical InformationAdjustable StyleSeries J04E2Technical InformationAdjustable StyleSeries J04C2Technical InformationSeries FA101Technical InformationSeries FC101Technical Information(2)Catalog HY15-3502/USP.C. Priority Flow Control Valve Series J02D3FC30Parker Hannifin Corporation Technical InformationFC31P.C. Priority Flow Regulator Valve Series FP101Catalog HY15-3502/USParker Hannifin Corporation Technical InformationFeaturesHardened, precision ground parts for durability Cartridge design(2)FC32Catalog HY15-3502/USP.C. Priority Flow Regulator ValveSeries FP101Parker Hannifin Corporation Technical InformationP.C. Priority Flow Control Valve Series J04D3Catalog HY15-3502/USFC33Parker Hannifin Corporation Technical Information(2)Catalog HY15-3502/USP.C. Priority Flow Control Valve Series J04D3FC34Parker Hannifin Corporation Technical InformationP.C. Priority Flow Control Valve Series J1A125Catalog HY15-3502/USFC35Parker Hannifin Corporation Technical Information(2)Catalog HY15-3502/USP.C. Priority Flow Control Valve Series J1A125FC36Parker Hannifin Corporation Technical InformationFC37Catalog HY15-3502/USParker Hannifin Corporation Restrictive Type Pressure Compensator Valve Series FCR101Technical Information(1)(3)FC38Catalog HY15-3502/USRestrictive Type Pressure Compensator ValveSeries FCR161Parker Hannifin Corporation Technical Information (3)FC39Catalog HY15-3502/USParker Hannifin Corporation Priority Type Pressure Compensator Valve Series FCP101Technical InformationFC40Parker Hannifin CorporationPriority Type Pressure Compensator Valve Series FCPH121Catalog HY15-3502/USFC41Parker Hannifin Corporation Technical InformationCatalog HY15-3502/USPriority Type Pressure Compensator Valve Series FCPH121FC42Parker Hannifin Corporation Technical InformationFlow Divider/Combiner Valve Series FDC101Catalog HY15-3502/USFC43Parker Hannifin Corporation Technical InformationDivider Outlets Combiner Inlets(3)Divider Inlet Combiner OutletCatalog HY15-3502/USFlow Divider/Combiner Valve Series FDC101FC44Parker Hannifin Corporation Technical InformationFlow Divider/Combiner Valve Series L04A3Catalog HY15-3502/USFC45Parker Hannifin Corporation Technical InformationDivider Outlets Combiner Inlets (3)Divider InletCatalog HY15-3502/USFlow Divider/Combiner Valve Series L04A3FC46Parker Hannifin Corporation Technical InformationFlow Divider/Combiner Valve Series L06A3Catalog HY15-3502/USFC47Parker Hannifin Corporation Technical InformationDivider Outlets Combiner Inlets (3)Divider InletCatalog HY15-3502/USFlow Divider/Combiner Valve Series L06A3FC48Parker Hannifin Corporation Technical InformationFlow Divider/Combiner Valve Series L1A300Catalog HY15-3502/USFC49Parker Hannifin Corporation Technical InformationDivider Outlets Combiner Inlets。

意大利快换接头样本

意大利快换接头样本
PLT 系列——平面快速接头
应 用: PLT 接头专为在连接和拆卸过程中能达到最小液体溢出量而设计。在需要考虑环 境因素的各个应用领域中该接头可取得最佳效果,尤其适用于农业,工厂和工业 领域。 特 性: 标准 PLT 接头都是钢制的,根据客户的需求也可以采用不同密封的的不同材料。 装卸很方便,用一只手把接头的两半推在一起就可以了。具有安全性的锁套可确 保接头连接紧密和防止接头意外脱开。DN13 符合 HTMA 规格。所有尺寸均执 行 ISO16028 标准。 平面 PLT1 系列: 材 质:具有高电阻,耐压,碳氮共渗或淬火硬化等特点的各种钢材,

公螺母 PLT1.0606.003 PLT1.0606.013 PLT1.1310.003 PLT1.1310.013 PLT1.1313.003 PLT1.1313.013 PLT1.2013.003 PLT1.2013.013 PLT1.2019.003 PLT1.2019.013 PLT1.2519.003 PLT1.2519.013 PLT1.2525.003 PLT1.2525.013 PLT1.3031.003 PLT1.3031.013 PLT1.3939.003 PLT1.3939.013

公螺母 PLTX.0606.113 PLTX.0606.013 PLTX.0615.033 PLTX.1310.113 PLTX.1310.013 PLTX.1313.113 PLTX.1313.013 PLTX.1319.033 PLTX.2013.113 PLTX.2013.012 PLTX.2019.113 PLTX.2019.013 PLTX.2027.032 PLTX.2219.113 PLTX.2219.013 PLTX.2227.033 PLTX.2525.113 PLTX.2525.013 PLTX.2533.033 PLTX.3031.113 PLTX.3031.013 PLTX.3939.113 PLTX.3939.013 PLTX.5051.113 PLTX.5051.013

PARKER PQT接头样本

PARKER  PQT接头样本

0
STI1144100
STI.1144.100
1
STI2144100
STI.2144.100
2
STI0148100
STI.0148.100
0
STI1148100
STI.1148.100
1
STI2148100
STI.2148.100
2
提示 1: 粗体字高亮显示的件号表明该产品为标准产品。 提示 2: 其他件号请联系派克液压过滤部门。
● System20监控器结合内嵌式传感器,能够给客户提供准 确、及时的流量、压力和温度读数,而系统无需停机
● 适用于各种矿物油、水、水/油乳化液 ● 模拟监控器 使用带保护铰接盖的3个Day-Glo刻度表 ● 流量高达380 l/min;双刻度表盘bar/psi & °C/°F. (美制
GPM也可用) ● EM20电子监控器 提供全数字显示 ● 传感器自动校准 ● 可存储300个测试数据 ● 能够实现数据下载保存
刻度表盘详细信息
流量计: 只有规格1和规格2的传感器有双重流量刻度。 量程分别为:100 l/min (26 US GPM)和 380 l/min (100 US GPM). 流量刻度盘还有过载流量指示。
当系统出现逆流或传感器位置对调时,表盘会出现小 于“0”的指示。 压力表: 压力刻度表盘分别有bar和psi指示,压力高达420 bar (6000psi). 温度表: 温度刻度盘读数范围: -10°C ~ +110°C (0°F ~ 230°F). 尺寸: ABS外壳: 292mm (11.5in) ×108mm (4.25in) ×67mm (2.64in) . 重量: 1.4kg (3lbs).
软管定位

派克Parker流体连接件中国区产品手册 上

派克Parker流体连接件中国区产品手册  上
课堂培训
在线培训
除了传统的课堂培训,派克还提 供在线培训。这些培训包括:
• P-TAC: 派克在线培训和认 证项目可以使您成 为流体连接件产品 的专家。
• 安全学习: 3个20分钟的互动模 块能够帮助员工在进 行相关操作时,学习、理解并且 遵循安全操作的指引
派克培训中心可为您提供系列培 训课程,这些课程均由具有派克 资质认可的培训师授课,并且为 参加学生提供必要学习材料,并 颁发课程证书。
航空航天 环境控制 机电 过滤 流体与气体处理 液压 气动 过程控制 密封与屏蔽
流体连接件中国区产品手册
3400-CN
关于派克汉尼汾
派克汉尼汾是全球领先的运动控制技术及系统的多元化制造商,年销售额超过 100亿美元。我们为商用车辆、行走液压、工业液压和航空航天等行业提供了包 括流体处理、过滤、密封和屏蔽、环境控制、过程控制及航空航天等精准技术 解决方案,我们的产品应用于运动控制领域的各个市场。我们实施多元化、价 值驱动的发展战略,并且很好地定位于全世界每个角落的发展。派克汉尼汾在 美国纽约证券交易所上市代码是“PH”。
ห้องสมุดไป่ตู้
1
Parkrimp扣压设备操作简
单方便:
1. 在软管上标记出插入深 度并插管
2. 选择合适的模具和扣压
环,并将其放置到位
2
3. 将软管和接头放置到
位,按下油泵开关直至扣
压环底端紧靠支架平台。
完成后,打开阀门,将扣
好的总成取出
3
派克青岛工厂可生产多种编织管和缠绕管, 这些软管与派克Parkrimp扣压设备相配套, 为客户提供更经济、更可靠的软管总成。
在派克,我们相信,最好的软管,就是能确保您的工作正确 并正常进行的那个。因此,我们为您提供了全系列可供不同 应用的软管。

Parker流体连接件

Parker流体连接件

Parker流体连接件Parker流体连接件Parker Fluid connectors productParker流体连接件 :包括 EO,EO2液压卡套接头,DIN⽆缝钢管,PARKER软管,PARKER软管接头,PARKER免剥胶软管,PARKER液压软管,软管接头及各类软管总成,测压管总成, PARKER软管接头外连接形式DKO 24°锥,NPT美制锥螺纹,JIC37°扩⼝,ORFS美制平⾯密封,JIS60°锥,JIS30°扩⼝,SAE法兰等。

快速接头,单向阀,球阀,管夹等各类液压连接件及卡套预装机,软管扣压机,⼿动弯管器,液压测试仪等。

Parker 快速接头Parker CPI&A-LOK卡套接头Parker MPI卡套接头Parker PHASTITE接头Parker EO2不锈钢接头Parker EO黄铜接头Parker EO渐进式卡套接头Parker EO-DUR不锈钢接头Parker EO焊接接头Parker O-LOK Plus断⾯密封接头Parker 硬管接头Parker 黄铜过渡接头Parker ⽓动接头Parker EO单向阀Parker EO截⽌阀及⼆通球阀Parker Prestomatic 2⽓制动接头Parker EO钢管Parker EO管夹Parker Triple-Lok 37° 扩⼝式接头Parker 仪表PIPE接头和ISO转换接头Parker PIPE活接头Parker 液压法兰及组件Parker 快速接头及诊断设备Parker Parflange F37⾼压⼤尺⼨液压管接头Parker O-LOK接头Parker Ermeto接头Parker橡胶液压软管Parker Parflex热塑软管Parker矿⼭机械⽤胶管,SteckO胶管接头和过渡接头Parker碳钢、不锈钢过渡接头Parker fittingsParker Quick Couplings and AccessoriesParker流体连接件PDF资料下载⽂件名称美国Parker流体连接件中国区产品⼿册 3400-CNParker软管,接头及设备Parker硬管接头及设备Parker快速接头Parker诊断设备 , Parker诊断,测试设备Parker技术⼿册Parker过程控制⾏业产品选型指南 Catalog 4204-ProcessParker Parkrimp 扣压系列 Push-Lok 可拆式 26系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 43系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 70系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 73系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 77系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 78系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 79系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 82系列软管接头Parker 软管 201和206系列交通⾏业软管Parker 软管制冷⾏业软管 285,244系列Parker 软管交通⾏业软管 293,213系列Parker 软管液压软管 302,436系列Parker 软管磷酸酯软管低温软管 304,472LT系列Parker 软管恒压软管 351TC,351ST系列Parker 软管液压软管 372,701系列Parker 软管铁路⾏业软管 441RH,372RH系列Parker 软管恒压软管 451TC, 451ST, 451TC Twin系列Parker 软管液压软管 471TC, 471ST, 471TC Twin系列Parker 软管液压软管 482TC, 482ST, 426系列Parker 软管液压软管 611, 601系列Parker 软管交通⾏业软管, 新能源/船舶⾏业软管 611HT, SS23CG系列Parker 软管铁路⾏业软管, 681DB, 421RH 系列Parker 软管低温软管, 722LT, 792LT 系列Parker 软管恒压软管, 722TC 系列Parker 软管液压软管 731, JK 系列Parker 软管恒压软管, 781, P35 系列Parker 软管恒压软管, 787TC 系列Parker 软管恒压软管, 791TC, 792ST 系列Parker 软管恒压软管, 797TC 系列Parker 软管吸油/回油软管, 811, 811HT 系列Parker 软管 Push-Lok 软管, 821, 821FR 系列Parker 软管 Push-Lok 软管, 836, 804 系列Parker 软管吸油/回油软管, Push-Lok 软管, 881, 801 系列Parker 软管设备及附件台式切割机台式软管切割机 CTH-1Parker 软管液压软管 H561, 422 系列Parker 软管技术信息如何订购软管,接头与设备Parker 软管技术信息 Media 介质Parker 软管接头及设备 PARKER_HOSE_OVERVIEW_CNParker 软管技术信息如何订购软管,接头与设备软管总成⽣产步骤Parker 派克软管、硬管、接头、连接器、阀及相关附件的选型使⽤安全指南Parker 软管设备及附件 KK2扣压机操作指南Parker 软管设备及附件 KK2便携式扣压机Parker 软管技术信息 Parkrimp No-Skive软管总成⽣产步骤Parker 软管设备及附件 PK2扣压机操作指南Parker 软管设备及附件 PK2扣压机Parker 快换接头通⽤型60 系列快换接头Parker 快换接头螺纹连接型6100 系列快换接头Parker 快换接头通⽤型6600 系列快换接头Parker 快换接头技术信息Parker 快换接头⽆溢流型FEM / IF 系列快换接头Parker 快换接头⽆溢流型FF系列快换接头Parker 快换接头技术信息流体兼容性表Parker 快换接头技术信息概览Parker 快换接头螺纹连接型QHPA 系列快换接头Parker 快换接头技术信息针对派克快换接头及相关附件选型及使⽤的安全指南Parker Parkrimp 扣压系列 Push-Lok 可拆式 S6系列软管接头Parker 软管新能源/船舶⾏业软管, SS25UL, 221FR 系列Parker软管设备及附件软管总成测试台TH 5-3Parker软管设备及附件清洗设备 TH 6-6Parker软管设备及附件清洗设备 TH 6-7Parker软管设备及附件软管清洁包 TH6-10-HL-9-2Parker软管设备及附件重载卧式扣压机 TH8E-380-BMParker软管设备及附件卧式扣压机 TH8E-530, TH 8E-535-BM Parker 快换接头⽆溢流型71 系列快换接头Parker 快换接头通⽤型H 系列快换接头Parker 快换接头螺纹连接型75 系快换接头Parker 快换接头⽆溢流型 FF系列系列快换接头Parker 快换接头⾼压型HP 系列快换接头Parker 快换接头通⽤型 TEMA T系列快换接头Parker Industrial Tube FittingsParker 软管接头及设备技术⼿册化学兼容性表Parker Hose Fittings and EquipmentParker 387 HoseParker 487 HoseParker 722 HoseParker 787 HoseParker 797 HoseParker Five Hoses Two Fittings One SolutionParker Transportation Hose 226 运输软管226系列软管Parker Hydraulic Hose 351TC 351STParker 451TC and 451ST Constant Working Pressure Hoses Parker Hydraulic Hose 711Parker Hydraulic Hose 721 721TCParker Hydraulic Hose 772TC 772STParker Hydraulic Hose 781 P35Parker Hydraulic Hose 782TC 782STParker Hydraulic Hose 791TC 792TC 792ST Parker 低压软管软管接头 PUSH-LOK 系列软管Parker 低压软管软管接头 838M – Push-Lok 软管。

Parker PF系列非泄漏快速连接器产品介绍说明书

Parker PF系列非泄漏快速连接器产品介绍说明书

PF Series Thermoplastic Non-Spill Couplings and Industrial Hose Products for Bulk Chemical and Fluid TransferBulletin 3800-PFAugust,2004PF Series Non-Spill Quick CouplingsTypical ApplicationsQuick Coupling Features, Advantages and Benefits•Parker Quick Couplings automatically shut off on disconnection to reduce or eliminate spills and leaks •Flush face design exhibits minimal spillage and air inclusion upon connection or disconnection reducing system contamination •Available in sizes 1⁄2”, 1”, and 2”providing quality couplers for most applications •Lightweight and reliable push-to-connect operation reduces worker fatigue and increases productivity •Plastic composite will not scratch painted or finished surfaces reducing costly rework•Parker Quick Couplings offer flexibility and save time when frequent connection and disconnection is required•1⁄2” PF Couplers and nipples interchange with the Parker 1⁄2” FS Series stainless steel non-spill couplers and nipples.The FS Coupler provides durability for the end of transfer hoses while the PF offers all the advantages of a plastic coupler on the tank•1” coupler has non-wetted springs reducing system contamination and improving flow•Chemical Manufacturing and Distribution •Replacement for Camlok Style Fittings and Ball Valves•Herbicide, Insecticide and Pesticide Processing •Spray Application Equipment •Bulk Transfer Barrels •Mini Bulk Tanks•Chemical Transport and Handling •Pharmaceutical ManufacturingParker PF Series non-spill couplings virtually eliminate the possibility of accidental chemical leaks or spills when lines are connected or disconnected.This makes them the ideal choice whenever a closed system fluid transfer or dispensing process is desired.Constructed from glass filled polypropylene with PTFE coated fluorocarbon tank gaskets,they are inert to most chemicals.This means they provide excellent performance whenused on applicators,returnable containers or bulk storage tanks.T a n k M o u n t :C o u p l e r s :B o d y S i z e 1 i n c h P B o d y S i z e 1/2 i n c h1 i n c h2 i n c h B o d y S i z e 1/2 i n c h 1 i n c h S p e c i f i c a t i o n s :R a t e d P r e s s u r e P r e s s u r e D r o p F o r c e t o F o r c e t o O p e r a t i n g S t o r a g e M a x i m u m S p i l l a g e B o d y S i z eM a t e r i a l S p r i n g s S e a l s @ 68°F R a t e d F l o w a t R a t e d F l o w C o n n e c t D i s c o n n e c t T e m p e r a t u r e T e m p e r a t u r e p e r D i s c o n n e c t V a c u u m R a t i n g 1/2 i n c hP o l y p r o p y l e n e 316 S t a i n l e s s S t e e l F l u o r o c a r b o n 100 P S I 12 G P M 11.3 P S I 32 l b s 12 l b s +40°F t o +140°F -20°F t o +140°F 0.01 c u i n (0.14 m l )27.4 H g 1 i n c hP o l y p r o p y l e n e 316 S t a i n l e s s S t e e l F l u o r o c a r b o n 60 P S I 20 G P M 3.4 P S I 54 l b s 17 l b s +40°F t o +140°F -20°F t o +140°F 0.06 c u i n (1.0 m l )C o n s u l t F a c t o r y 2 i n c hP o l y p r o p y l e n e 316 S t a i n l e s s S t e e l F l u o r o c a r b o n100 P S I50 G P M4.0 P S I 41 l b s 17 l b s +40°F t o +140°F -20°F t o +140°F 0.18 c u i n (3.0 m l )C o n s u l t F a c t o r yParker Industrial Hose ProductsDynaFlex®PVC Standard Duty Suction HoseSeries 7560 is a versatile hose for agriculture, mining, construction, and industry.Warning: Elevated temperatures can change chemical resistance ratings. Check chemical concentration and compatibility.Other Quick Coupling ProductsHydraulic Quick Couplings • Various Configurations • Double Shut-Off • Single Shut-Off • Straight ThroughSwivels• Various End Configurations • In-Line Styles • 90°StylesCheck Valves • In-line Styles • Cartridge Styles • Split-flange Styles • 5,000 Configurations Bulletin 3800-PFQuick Couplings Parker Hannifin Corporation Quick Coupling Division 8145 Lewis Road Minneapolis,MN 55427Phone:763-525-4240Fax:763-544-3418Industrial Hose ProductsParker Hannifin Corporation Industrial Hose Products 17295 Foltz Industrial Parkway Cleveland,OH 44149Phone:440-286-2120Fax:440-286-2230/quickcouplingsPRINTED IN U.S.A. GR, MP 5M 08/04For additional information:Innovative Solutions with Unique Advantages:Pneumatic Quick Couplings • Industry Interchanges • Manual Connect • Push-to-Connect • Exhaust StylesThermoplastic Couplings • Various Sizes• Chemical Compatibility • Push-to-Connect • Non-Spill StylesDiagnostic Equipment • Digital Recording Meters • Digital Gauges• Diagnostic Quick Couplings • Sensors and Accessories。

派克换向阀样本

派克换向阀样本

技术参数 概况
结构形式 公称尺寸 接口 安装位置 环境温度 重量:单电磁铁阀 双电磁铁阀 紧固螺栓 滑阀式换向阀 DIN NG6 / CETOP 03 / NFPA D03 DIN 24340 A6 / ISO 4401 / CETOP RP 121-H / NFPA D03 任意,优先考虑水平位置 -25°C...+50°C 1.5 kg 2.1 kg 4 个 DIN 912 M5x30-12.9; 扭矩 8.1 Nm ± 10%; 订货代号 BK 375 液压油依照 DIN 51524 / 51525 标准 -25°C至 + 70°C 2.8 至 400 mm2/s (2.8 至 400 cSt) 350 bar 标准的: 105 bar 代号 H: 210 bar 每个控制边至 10 ml/min 取决于阀芯 80 l/min NAS 1638 7-9级, 达到 β10 > 75 100% ED; 注意: 线圈温度可到150OC IP 65 DIN 40050 标准(在插和装情况下) 吸持 代号 功率 30 W 30 W 8W 30 W 30 W 64 VA / 59 VA 68 VA / 62 VA 直流 32 ms / 40 ms 15.000 次/小时 插头依照 DIN 43650 标准, 可选择 AF/PG11结构的插座, 带引线的接线盒 , 也可选择插入式插头 插头 M12x1 (仅用于 8 W) 电流 2.5 A 1.25 A 0.33A 0.31 A 0.15 A 0.58 A / 0.49 A 0.31 A / 0.26 A 功率 231 VA / 240 VA 231 VA / 240 VA
代号 无 5
说明 标准的阀 不带附件 在接线盒里的指示灯 和接线端子 在接线盒里的插入 式插头外壳 3- 针= 单个电磁铁 5- 针= 双电磁铁 A 端终点位置监控 B 端终点位置监控 选择 5 和6 组合 在一起 A 端初始位置监控

派克液压中文样本

派克液压中文样本

液压注意 – 用户方责任 错误或不当地选择或使用本样本或有关资料阐述的产品,可能会导致人生伤亡及财产损失! 本样本以及其它由派克汉尼汾公司及其子公司、销售公司与授权分销商所提供的资料,仅供用户专业技术人员在对产品和系统的选型进行深入调查考证时参考。

用户应全面分析自身设备的运行工况、适用的工业标准,并仔细查阅现行的样本,以详细地了解产品及系统的相关信息,通过自己的分析和试验,对产品及系统的独立的最终选择负责,确保能满足自身设备的所有性能、耐用性、维修型、安全性以及预警功能等要求。

对于派克或其子公司或授权分销商而言,应负责按用户提供的技术资料和规范,选择和提供适当的元件或系统,而用户则应负责确定这些技术资料和规范对其设备的所有运行工况和能合理预见的使用工况是否充分和准确。

目录目录页次概述 1 订货代号 2 技术参数 4 变量控制器 5 控制选项 “C”, 压力限定(恒压)变量控制器 5 控制选项 “L”, 负载传感及压力限定变量控制器 6 控制选项 “AM”, 带遥控口的标准型先导式压力限定变量控制器 7 控制选项 “AN”, 带ISO 4401 NG06先导阀安装界面的先导式压力限定变量控制器 8 控制选项 “AE”及“AF”, 带电磁比例调节的先导式压力限定变量控制器 9 控制选项 “AMT”, “ALT”及“LOT”, 带最高压力限定的扭矩限定(恒功率)变量控制器 10 P1性能特性 11典型流量特性 11 典型总效率特性 13 典型轴输入功率特性 15 典型噪声特性 18 典型轴承寿命 20 PD性能特性 22典型流量特性 22 典型总效率特性 24 典型轴输入功率特性 26 典型噪声特性 29 典型轴承寿命 31 安装尺寸 33 P1/PD 018 33 P1/PD 028 36 P1/PD 045 40 P1/PD 060 44 P1/PD 075 49 P1/PD 100 54 P1/PD 140 59 变量控制器安装尺寸 65 可提供的扩展的液压产品 75派克汉尼汾备记派克汉尼汾概述简介, 优点派克汉尼汾简介 • 开式回路用轴向柱塞式变量液压泵 • 中压,连续工作压力280 bar • 高驱动转速型,适用于行走机械; 低噪声型,适用于工业应用 • 静音及高效的控制效能 优点 • 总结构尺寸紧凑 • 低噪声• 流量脉动小,进一步降低噪声• 采用弹性密封,不使用密封垫,从而避免外泄漏的产生• 总效率高,功耗小,减小发热• 采用带无泄漏调节装的简单变量控制器 • 符合SAE 及ISO 标准的安装法兰及油口 • 采用圆锥滚柱轴承,使用寿命长 • 全功率后驱动能力• 后部或侧面油口配置可选• 泄油口的配置对水平安装及驱动轴向上垂直安装均适用• 带有最大及最小排量调节选项 • 具有壳体至吸口单向阀选项,可延长轴封寿命 • 使用、维修方便 脉动容腔技术下列图表所示为侧向油口配置P1/PD 18, 28及45泵采用 “脉动容腔” 技术的效果,脉动容腔可降低泵出口处的压力脉动幅值40-60%,这样,无需增加成本来加装噪声缓冲元件,便可大大降低液压系统的整体噪声,P1系列 PD 系列出口压力p / bar平均压力脉动 / b a rP1 045出口压力脉动2600 rpm 无脉动容腔2600 rpm 带脉动容腔订货代号18 ml, 28 ml, 45ml派克汉尼汾P 类型 01 驱动轴 转向R 5密封材料E 油口配置0 壳体-吸口 单向阀 0 排量调节 018 排量 S 安装法兰 及油口 S 轴封 M 应用范围A 设计系列0 通轴驱动选项 C0控制选项0附加控制选项 00油漆 00修改代号系列 P D * 仅适用于045排量, “S”型安装法兰及油口00 标准型, 无修改M2 按要求修改 代号修改代号 * 适用于028及045排量 ** 仅适用于045排量 代号设计系列 A 现行设计系列5 氟碳橡胶 (FPM) 代号密封材料 A 82-2 SAE A M33x2 M27x2 BSPP 1/4”, 3/8” 101-2 SAE B M42x2 M27x2 BSPP 1/4”, 1/2” 101-2SAE B M48x2M33x2Ø38/25DN51/25BSPP 1/4”, 1/2”B ISO M33x2 M27x2 BSPP 1/4”,3/8”ISO M42x2 M27x2 BSPP 1/4”, 1/2” ISO M48x2M33x2Ø38/25DN51/25BSPP 1/4”, 1/2”代号 018排量 028排量 045排量 安装法兰及油口 安装 法兰 螺纹 油口 辅助 油口 安装 法兰 螺纹 油口 辅助 油口 安装法兰螺纹油口法兰 油口辅助 油口 S 82-2 SAE A SAE 16/12 SAE 4/6 101-2 SAE B SAE 20/12 SAE 4/8 101-2SAE B SAE 24/16Ø38/2561系列SAE 4/10M ISO M33x2 M27x2 M12x1.5 M16x1.5 ISO M42x2 M27x2 M12x1.5 M22x1.5 ISO M48x2M33x2Ø38/25DN51/25M12x1.5M22x1.5代号 018驱动轴 028驱动轴 045驱动轴 01 SAE A 11T 花键SAE B-B 15T 花键 SAE B-B 15T 花键02 SAE 19-1平键Ø0.75” SAE B-B 平键Ø1” SAE B-B 平键Ø1” 08— SAE B 13T 花键 SAE B 13T 花键 04 ISO/DIN 平键, Ø20ISO/DIN 平键, Ø25ISO/DIN 平键, Ø25 06 SAE A 9T 花键— — PD 工业液压用 代号 系列P1 行走机械用 代号 排量 018 18 ml/rev (1.10 in 3/rev) 028 28 ml/rev (1.71 in 3/rev) 045 45 ml/rev (2.75 in 3/rev) 代号 类型 P 开式回路用变量柱塞泵 U*通用 代号应用范围 S 工业液压 (PD) M 行走机械 (P1) R 顺时针 (右转)L 逆时针 (左转)代号 转向 代号 轴封 S 单唇轴封 * 并不具有控制功能,仅在运输时予以防护,详情见第7页的控制说明。

派克扩口式管接头样本Parker JIC Fitting

派克扩口式管接头样本Parker JIC Fitting

Triple-Lok®The universal37° fl ared fi ttingTriple-Lok®Visual indexTube to tubeBulkhead unionTube tomale NPTFTube tomale BSPTTube tomale BSPPTube to straightthread UNFTube tomale metricISO 6149-3Tube tomale metricDIN 3852-1Tube tofemale NPTFHMTX EMTX JMTX KTXp. K9 p. K10 p. K11 p. K14WMTX WEMTX WNTX WJTX WJJTX WLNMp.K15 p.K16 p.K17 p.K18 p.K19 p.K92FMTX CMTXC CTX CCCTX VMTX RMTX SMTXp.K36 p.K51 p.K52 p.K53 p.K59 p.K71 p.K65F3MX C3MX V3MX R3MX S3MXp.K37 p.K54 p.K60 p.K72 p.K66F4OMX F42EDMX C4OMX V4OMX R4OMX S4OMXp.K33 p.K32 p.K49 p.K57 p.K69 p.K63F5OMX FF5OMX C5OMX CC5OX V5OMX R5OMX S5OMX p.K29 p.K31 p.K47 p.K48 p.K56 p.K68 p.K62F87OMX C87OMX V87OMX R87OMX S87OMXp.K28 p.K46 p.K55 p.K67 p.K61F8OMX F82EDMX C8OMX V8OMX R8OMX S8OMXp.K35 p.K34 p.K50 p.K58 p.K70 p.K64GMTX WGMTX DMTX OTX MTX G6Xp.K74 p.K75 p.K76 p.K77 p.K78 p.K79KTriple-Lok ®Triple-Lok®KTriple-Lok ®BTX NutTriple-Lok ® 37° Flare end nut SAE 070110 MS51531Tube Thread Weight O.D. UN/UNF-2B C D L (steel) Triple-Lok ® Triple-Lok ® Triple-Lok ® mm in. T6 in. mm mm g/1 piece Steel Stainless Steel Brass 1/8 5/16-24 3/8 5 14 6 2 BTX-S 2 BTX-SS2 BTX-B 3/16 3/8-24 7/16 6 16 83 BTX-S 3 BTX-SS 3 BTX-B 6 1/4 7/16-20 9/16 8 16 11 4 BTX-S 4 BTX-SS 4 BTX-B 8 5/16 1/2-20 5/8 10 17 145 BTX-S 5 BTX-SS 5 BTX-B 10 3/8 9/16-18 11/16 11 18 18 6 BTX-S 6 BTX-SS 6 BTX-B 12 1/2 3/4-16 7/8 15 22 29 8 BTX-S 8 BTX-SS 8 BTX-B 14, 15, 16 5/8 7/8-14 1 18 25 54 10 BTX-S 10 BTX-SS 10 BTX-B 18, 20 3/4 1 1/16-12 1 1/4 21 26 73 12 BTX-S 12 BTX-SS 12 BTX-B 22 7/8 1 3/16-12 1 3/8 24 28 100 14 BTX-S 14 BTX-SS 14 BTX-B 25 1 1 5/16-12 1 1/2 28 29 104 16 BTX-S 16 BTX-SS 16 BTX-B 28, 30, 32 1 1/4 1 5/8-12 2 34 31 240 20 BTX-S 20 BTX-SS 20 BTX-B 35, 38 1 1/2 1 7/8-12 2 1/4 41 36 325 24 BTX-S 24 BTX-SS 24 BTX-B2 2 1/2-12 2 7/8 55 45 549 32 BTX-S32 BTX-SSOrder codes shown are part of our current manufacturing programme.Triple-Lok®BMTX NutTriple-Lok® 37° Flare end nutSAE 070110Tube Thread WeightO.D. UN/UNF-2B C D L (steel) Triple-Lok® Triple-Lok®Steelpiece Steel Stainless mm in. T6 mm mm mm g/16 1/4 7/16-20 14 8 16 11 4BMTXS 4BMTXSS8 5/16 1/2-20 17 10 17 14 5BMTXS 5BMTXSS10 3/8 9/16-18 19 11 18 18 6BMTXS 6BMTXSS12 1/2 3/4-16 22 15 21 29 8BMTXS 8BMTXSS14, 15, 16 5/8 7/8-14 27 18 25 42 10BMTXS 10BMTXSS 18, 20 3/4 1 1/16-12 32 22 26 73 12BMTXS 12BMTXSS5/16-12 41 28 28 104 16BMTXS 16BMTXSS25 1 128, 30, 32 1 1/4 1 5/8-12 50 34 31 240 20BMTXS 20BMTXSS 35, 38 1 1/2 1 7/8-12 60 41 36 325 24BMTXS 24BMTXSS42 21/4 65 48 40 437 28BMTXS 28BMTXSSOrder codes shown are part of our current manufacturing programme.KTriple-Lok ®Tube WeightO.D. L X (steel) Triple-Lok ® Triple-Lok ® Triple-Lok ®mm mm mm g/1 piece Steel Stainless Steel Brass 6 10 10 2 TXS6 TXSS6 TXB6 8 11 11 2 TXS8 TXSS8 TXB8 10 13 13 2 TXS10 TXSS10 TXB10 12 14 17 7 TXS12 TXSS12 TXB12 14 17 20 13 TXS14 TXSS14 TXB14 15 17 20 10 TXS15 TXSS15 TXB15 16 17 20 7 TXS16 TXSS16 TXB16 18 17 25 16 TXS18 TXSS18 TXB18 20 17 25 12 TXS20 TXSS20 TXB20 22 19 28 25 TXS22 TXSS22 TXB22 25 20 31 21 TXS25 TXSS25 TXB25 28 23 39 40 TXS28 TXSS28 TXB28 30 23 39 45 TXS30 TXSS30 TXB30 32 23 39 30 TXS32 TXSS32 TXB32 35 28 45 60 TXS35 TXSS35 TXB35 38 28 45 51 TXS38 TXSS38 TXB38 422955149TXS42 TXSS42 TXB42Order codes shown are part of our current manufacturing programme.TX SleeveTriple-Lok ® 37° Flare tube end sleeve for metric tubes SAE 070105Triple-Lok ®Tube WeightO.D. L X (steel) T riple-Lok ® Triple-Lok ® Triple-Lok ® in. mm mm g/1 piece Steel Stainless Steel Brass 1/8 9 7 22 TX-S 2 TX-SS 2 TX-B 3/169823 TX-S 3 TX-SS 3 TX-B 1/4 10 10 2 4 TX-S 4 TX-SS 4 TX-B 5/16 11 11 25 TX-S 5 TX-SS 5 TX-B 3/8 13 13 36 TX-S 6 TX-SS 6 TX-B 1/2 14 17 68 TX-S 8 TX-SS 8 TX-B 5/8 17 20 8 10 TX-S 10 TX-SS 10 TX-B 3/4 17 25 13 12 TX-S 12 TX-SS 12 TX-B 7/8 19 28 18 14 TX-S 14 TX-SS 14 TX-B 1 20 31 23 16 TX-S 16 TX-SS 16 TX-B 1 1/4 23 39 30 20 TX-S 20 TX-SS 20 TX-B 1 1/2 28 45 51 24 TX-S 24 TX-SS 24 TX-B 2306115632 TX-S32 TX-SS32 TX-BOrder codes shown are part of our current manufacturing programme.TX SleeveTriple-Lok ® 37° Flare tube sleeve SAE 070105 MS51533KTriple-Lok ®Tube 1 Tube 2 Thread Thread Weight PN (bar)O.D. O.D. UN/UNF-2A UN/UNF-2A C D D1 L1 (steel) Triple-Lok ® Triple-Lok ® Triple-Lok ®mm in. mm in. T1 T2 mm mm mm mm g/1 piece Steel Stainless Steel Brass S SS1/8 1/8 5/16-24 5/16-24 11 2 2 30 9 2 HTX-S 500 —3/16 3/16 3/8-24 3/8-24 11 3 3 31 10 3 HTX-S 500 — 6 1/4 6 1/4 7/16-20 7/16-20 13 4 4 35 16 4HMTXS 4HMTXSS 4HMTXB 500 350 6 1/4 1/8 7/16-20 5/16-24 13 5 2 32 12 4-2 HTX-S 4-2HMTXSS 4-2HMTXB 500 350 6 1/4 3/16 7/16-20 3/8-24 13 5 3 33 14 4-3 HTX-S 4-3HMTXSS 4-3HMTXB 500 350 8 5/16 8 5/16 1/2-20 1/2-20 14 6 6 35 18 5HMTXS 5HMTXSS 5HMTXB 420 350 8 5/16 6 1/4 1/2-20 7/16-20 14 6 5 35 18 5-4 HTX-S 5-4HMTXSS 5-4HMTXB 420 350 10 3/8 10 3/8 9/16-18 9/16-18 17 8 8 36 25 6HMTXS 6HMTXSS 6HMTXB 420 350 10 3/8 6 1/4 9/16-18 7/16-20 17 8 4 36 22 6-4HMTXS 6-4HMTXSS 6-4HMTXB 420 350 10 3/8 8 5/16 9/16-18 1/2-20 17 8 6 36 25 6-5 HTX-S 6-5HMTXSS 6-5HMTXB 420 350 12 1/2 12 1/2 3/4-16 3/4-16 19 10 10 41 52 8HMTXS 8HMTXSS 8HMTXB 420 350 12 1/2 6 1/4 3/4-16 7/16-20 21 10 5 39 45 8-4 HTX-S 8-4HMTXSS 8-4HMTXB 420 350 12 1/2 10 3/8 3/4-16 9/16-18 19 10 8 39 45 8-6HMTXS 8-6HMTXSS 8-6HMTXB 420 350 14, 15,16 5/8 14, 15,16 5/8 7/8-14 7/8-14 24 12 12 48 80 10HMTXS 10HMTXSS 10HMTXB 350 350 14, 15,16 5/8 10 3/8 7/8-14 9/16-18 24 13 8 43 60 10-6HMTXS 10-6HMTXSS 10-6HMTXB 350 350 14, 15,16 5/8 12 1/2 7/8-14 3/4-16 24 12 10 45 68 10-8HMTXS 10-8HMTXSS 10-8HMTXB 350 350 18, 20 3/4 18, 20 3/4 1 1/16-12 1 1/16-12 27 16 16 55 125 12HMTXS 12HMTXSS 12HMTXB 350 350 18, 20 3/4 12 1/2 1 1/16-12 3/4-16 29 16 10 50 101 12-8 HTX-S 12-8HMTXSS 12-8HMTXB 350 350 20 3/4 14, 15,16 5/8 1 1/16-12 7/8-14 29 16 12 52 113 12-10HMTXS 12-10HMTXSS 12-10HMTXB 350 350 22 7/8 22 7/8 1 3/16-12 1 3/16-12 32 18 18 56 156 14 HTX-S 14HMTXSS 14HMTXB 280 280 25 1 25 1 1 5/16-12 1 5/16-12 36 22 22 57 131 16HMTXS 16HMTXSS 16HMTXB 280 280 25 1 20 3/4 1 5/16-12 1 1/16-12 36 22 16 56 169 16-12HMTXS 16-12HMTXSS 16-12HMTXB 280 280 28, 30, 32 1 1/4 28, 30, 32 1 1/4 1 5/8-12 1 5/8-12 46 28 28 62 271 20HMTXS 20HMTXSS 20HMTXB 280 210 28, 30, 32 1 1/4 25 1 1 5/8-12 1 5/16-12 46 28 22 61 235 20-16HMTXS 20-16HMTXSS 20-16HMTXB 280 210 35, 38 1 1/2 35, 38 1 1/2 1 7/8-12 1 7/8-12 50 33 33 70 382 24HMTXS 24HMTXSS 24HMTXB 210 210 42 42 2 1/4-12 2 1/4-12 60 39 39 71 469 28HMTXS 28HMTXSS 28HMTXB 140 150 2 2 2 1/2-12 2 1/2-12 67 45 45 87 785 32 HTX-S 32HMTXSS 32HMTXB 140 150Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.HMTX UnionTriple-Lok ® 37° Flare ends SAE 070101 MS51501Triple-Lok®EMTX Union elbowTriple-Lok® 37° Flare endsSAE 070201 MS51505(bar) Tube Thread Thread Weight PNY(steel)Triple-Lok® Triple-Lok® Triple-Lok®M1MUN/UNF2-ADD1O.D. UN/UNF-2Amm in. T T1 mm in. mm mm mm g/1 piece Steel Stainless Steel Brass S SS 1/8 5/16-24 5/16-24 2 2 20 20 11 18 2 ETX-S 500—— 3/16 3/8-24 3/8-24 3 3 21 21 11 20 3 ETX-S 500500 3506 1/4 7/16-20 7/16-20 4 4 23 23 11 25 4EMTXS 4EMTXSS 4ETX-B420 350ETX-B8 5/16 1/2-20 1/2-20 6 6 24 24 13 32 5EMTXS 5EMTXSS 5420 35010 3/8 9/16-18 9/16-18 8 8 27 27 14 44 6EMTXS 6EMTXSS 6ETX-B10 3/8 9/16-18 7/16-20 8 4 27 27 14 40 6-4 ETX-S 6-4EMTXSS 6-4 ETX-B 420 350420 350ETX-B12 1/2 3/4-16 3/4-16 10 10 32 32 19 88 8EMTXS 8EMTXSS 812 1/2 3/4-16 3/8-24 10 8 32 29 19 75 8-6 ETX-S 8-6EMTXSS 420 —350 350ETX-B 15,16 5/8 7/8-14 7/8-14 12 12 37 37 22 139 10EMTXS 10EMTXSS 1014,15,16 5/8 7/8-14 3/4-16 12 10 37 34 22 120 10-8 ETX-S 10-8EMTXSS 10-8 ETX-B 350 35014,ETX-B350 3501/16-12 16 16 42 42 27 258 12EMTXS 12EMTXSS 121/16-12 118,20 3/4 11/16-12 3/4-16 16 10 42 46 27 220 12-8 ETX-S 12-8EMTXSS 350 —20 3/4 118,1/16-12 7/8-14 16 12 42 39 27 240 12-10 ETX-S 12-10EMTXSS 350 —20 3/4 118,3/16-12 18 18 44 44 30 273 14 ETX-S 14EMTXSS 280 —22 7/8 13/16-12 1ETX-B280 2805/16-12 22 22 46 46 33 333 16EMTXS 16EMTXSS 165/16-12 125 1 122,5/16-12 11/16-12 22 16 46 45 33 310 16-12 ETX-S 16-12EMTXSS 16-12 ETX-B 280 28025 1 122,ETX-B280 21028, 30, 32 1 1/4 1 5/8-12 1 5/8-12 28 28 52 52 41 586 20EMTXS 20EMTXSS 20210 140ETX-B 35, 38 1 1/2 1 7/8-12 1 7/8-12 33 33 59 59 48 778 24EMTXS 24EMTXSS 24—1/4-12 21/4-12 39 39 74 74 63 1100 28 ETX-S 140 3/4 242 1—1/2-12 45 45 78 78 64 1680 32 ETX-S 1402 21/2-12 2Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.KKKTX Union crossTriple-Lok® 37° Flare end (four ends)SAE 070501 MS51517Tube Thread Weight PN(bar)Triple-Lok® Triple-Lok® Triple-Lok®(steel)O.D. UN/UNF-2AD M YSSSteel Brass Spiece Steel Stainless mm in. T mm mm mm g/11/4 7/16-20 4 23 11 41 4 KTX-S 4 KTX-SS 4 KTX-B 500 35065/16 1/2-20 6 24 14 50 5 KTX-S 5 KTX-SS 5 KTX-B 420 350810 3/8 9/16-18 8 27 14 68 6 KTX-S 6 KTX-SS 6 KTX-B 420 35012 1/2 3/4-16 10 32 19 144 8 KTX-S 8 KTX-SS 8 KTX-B 420 35014, 15,16 5/8 7/8-14 12 37 22 220 10 KTX-S 10 KTX-SS 10 KTX-B 350 350 18, 20 3/4 1 1/16-12 16 42 27 345 12 KTX-S 12 KTX-SS 12 KTX-B 350 350 5/16-12 22 46 33 588 16 KTX-S 16 KTX-SS 16 KTX-B 280 28025 1 1Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.KMaximum bulkhead wallthicknessTube O.D. Straight bulkhead unionShape bulkhead unionMax. thicknessMax. thicknessSize inch metric mmmm4 1/4 6 8.4 5.35 5/16 8 8.4 5.3 6 3/8 10 10.7 7.18 1/2 12 11.2 8.4 10 5/8 14–16 10.9 8.1 12 3/4 18–2011.2 8.6 14 7/8 10.4 7.9 16 1 22–25 9.9 7.4 20 1 1/4 28–32 10.2 7.4 24 1 1/235–387.1 — 3227.1—WMTX Bulkhead unionTriple-Lok ® 37° Flare ends SAE 070601 MS51520Tube Thread WeightPN (bar) O.D. UN/UNF-2A C2 D I1 L4 (steel) Triple-Lok ® Triple-Lok ® Triple-Lok ®mm in. T mm mm mm mm g/1 piece Steel Stainless Steel BrassS SS6 1/4 7/16-20 17 4 31 53 41 4WMTXWLNMS 4WMTXWLNMSS 4WMTXWLNMB 500 3508 5/16 1/2-20 19 6 31 53 49 5WMTXWLNMS 5WMTXWLNMSS 5WMTXWLNMB 420 350 10 3/8 9/16-18 22 8 33 55 64 6WMTXWLNMS 6WMTXWLNMSS 6WMTXWLNMB 420 350 12 1/2 3/4-16 24 10 37 62 111 8WMTXWLNMS 8WMTXWLNMSS 8WMTXWLNMB 420 350 14, 15,16 5/8 7/8-14 30 12 40 70 157 10WMTXWLNMS 10WMTXWLNMSS 10WMTXWLNMB 350 350 18, 20 3/4 1 1/16-12 36 16 44 79 254 12WMTXWLNMS 12WMTXWLNMSS 12WMTXWLNMB 350 350 22 7/8 1 3/16-12 38 18 45 80 296 14 WTX-WLN-S 14WMTXWLNMSS 14WMTXWLNMB 280 280 25 1 1 5/16-12 41 22 44 80 337 16WMTXWLNMS 16WMTXWLNMSS 16WMTXWLNMB 280 280 28, 30, 32 1 1/4 1 5/8-12 50 28 46 84 462 20WMTXWLNMS 20WMTXWLNMSS 20WMTXWLNMB 280 210 35, 38 1 1/2 1 7/8-12 55 33 46 89 695 24WMTXWLNMS 24WMTXWLNMSS 24WMTXWLNMB 210 140Order codes shown are part of our current manufacturing programme. Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLNM” (e. g. 16WMTX)PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.WEMTX Bulkhead union elbowTriple-Lok® 37° Flare endsSAE 070701 MS51507(bar) Tube Thread Weight PNM4YM3(steel) Triple-Lok® Triple-Lok® Triple-Lok®I2C2O.D. UN/UNF-2ADmm in. T mm mm mm mm mm mm g/1 piece Steel Stainless Steel Brass S SS6 1/4 7/16-20 17 4 26 25 40 11 44 4 WETX-WLN-S 4 WETX-WLN-SS 4 WETX-WLN-B 500 3508 5/16 1/2-20 19 6 26 27 44 13 59 5 WETX-WLN-S 5 WETX-WLN-SS 5 WETX-WLN-B 420 35010 3/8 9/16-18 22 8 28 28 46 14 72 6WEMTXWLNMS 6 WETX-WLN-SS 6 WETX-WLN-B 420 35012 1/2 3/4-16 24 10 32 36 54 19 145 8WEMTXWLNMS 8 WETX-WLN-SS 8 WETX-WLN-B 420 350 14,15,16 5/8 7/8-14 30 12 35 40 61 22 212 10WEMTXWLNMS 10 WETX-WLN-SS 10 WETX-WLN-B 350 350 1/16-12 36 16 40 45 68 27 345 12WEMTXWLNMS 12 WETX-WLN-SS 12 WETX-WLN-B 350 35020 3/4 118,3/16-12 38 18 40 49 71 33 370 14 WETX-WLN-S 14 WETX-WLN-SS 280 —22 7/8 15/16-12 41 22 40 49 71 33 474 16 WETX-WLN-S 16 WETX-WLN-SS 280 —25 1 128, 30, 32 1 1/4 1 5/8-12 48 28 41 55 80 41 753 20 WETX-WLN-S 20 WETX-WLN-SS 280 —Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLNM” (e. g. 16WETX)PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.Maximum bulkhead wallthicknessTube O.D. Straight bulkhead union Shape bulkhead unionMax. thickness Max. thicknessSize inch metric mm mm4 1/4 6 8.4 5.35 5/16 8 8.4 5.36 3/8 10 10.7 7.18 1/2 12 11.2 8.410 5/8 14–16 10.9 8.112 3/4 18–20 11.2 8.614 7/8 10.4 7.916 1 22–25 9.9 7.41/4 28–32 10.2 7.420 11/2 35–38 7.1 —24 132 2 7.1 —KMaximum bulkhead wallthicknessTube O.D. Straight bulkhead unionShape bulkhead unionMax. thicknessMax. thicknessSize inch metric mmmm4 1/4 6 8.4 5.35 5/16 8 8.4 5.3 6 3/8 10 10.7 7.18 1/2 12 11.2 8.4 10 5/8 14–16 10.9 8.1 12 3/4 18–2011.2 8.6 14 7/8 10.4 7.9 16 1 22–25 9.9 7.4 20 1 1/4 28–32 10.2 7.4 24 1 1/235–387.1 — 3227.1—WNTX 45° Bulkhead union elbowTriple-Lok ® 37° Flare ends SAE 070801 MS51509Tube Thread WeightPN (bar) O.D. UN/UNF-2A C2 D I2 M2 M9 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS6 1/4 7/16-20 17 4 26 18 39 11 324 WNTX-WLN-S 4 WNTX-WLN-SS 500 350 8 5/16 1/2-20 19 6 26 20 42 14 415 WNTX-WLN-S 420 —10 3/8 9/16-18 21 8 28 21 42 14 48 6 WNTX-WLN-S 6 WNTX-WLN-SS 420 350 12 1/2 3/4-16 25 10 32 25 49 19 105 8 WNTX-WLN-S 8 WNTX-WLN-SS 420 350 14, 15,16 5/8 7/8-14 29 12 35 28 55 22 152 10 WNTX-WLN-S 10 WNTX-WLN-SS 350 350 18, 20 3/4 1 1/16-12 35 16 40 33 62 27 245 12 WNTX-WLN-S 12 WNTX-WLN-SS 350 350 22, 25 1 1 5/16-12 41 22 40 37 65 33 355 16 WNTX-WLN-S 16 WNTX-WLN-SS 280 28028, 30, 321 1/41 5/8-12 48 28 41 40 67 4146520 WNTX-WLN-S280 —Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLN” (e.g. 16 WNTX)PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.Maximum bulkhead wallthicknessTube O.D. Straight bulkhead unionShape bulkhead unionMax. thicknessMax. thicknessSize inch metric mmmm4 1/4 6 8.4 5.35 5/16 8 8.4 5.3 6 3/8 10 10.7 7.18 1/2 12 11.2 8.4 10 5/8 14–16 10.9 8.1 12 3/4 18–2011.2 8.6 14 7/8 10.4 7.9 16 1 22–25 9.9 7.4 20 1 1/4 28–32 10.2 7.4 24 1 1/235–387.1 — 3227.1—WJTX Bulkhead branch teeTriple-Lok ® 37° Flare ends SAE 070959 MS51515Tube Thread WeightPN (bar) O.D. UN/UNF-2A C2 D I2 M3 M4 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS6 1/4 7/16-20 17 4 26 25 40 11 454 WJTX-WLN-S 4 WJTX-WLN-SS 500 35010 3/8 9/16-18 21 8 28 28 46 14 71 6 WJTX-WLN-S 6 WJTX-WLN-SS 420 350 12 1/2 3/4-16 25 10 32 35 54 19 158 8 WJTX-WLN-S 8 WJTX-WLN-SS 420 350 14, 15,16 5/8 7/8-14 29 12 35 40 61 22 297 10 WJTX-WLN-S 10 WJTX-WLN-SS 350 350 18, 20 3/4 1 1/16-12 35 16 40 45 68 27 379 12 WJTX-WLN-S 12 WJTX-WLN-SS 350 35022, 25 1 1 5/16-12 42 22 40 49 71 33 420 16 WJTX-WLN-S 280 — 28, 30, 321 1/41 5/8-12 48 28 41 55 79 4150020 WJTX-WLN-S280 —Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLN” (e.g. 16 WJTX)PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.KMaximum bulkhead wallthicknessTube O.D. Straight bulkhead unionShape bulkhead unionMax. thicknessMax. thicknessSize inch metric mmmm4 1/4 6 8.4 5.35 5/16 8 8.4 5.3 6 3/8 10 10.7 7.18 1/2 12 11.2 8.4 10 5/8 14–16 10.9 8.1 12 3/4 18–2011.2 8.6 14 7/8 10.4 7.9 16 1 22–25 9.9 7.4 20 1 1/4 28–32 10.2 7.4 24 1 1/235–387.1 — 3227.1—WJJTX Bulkhead run teeTriple-Lok ® 37° Flare ends SAE 070958 MS51516Tube Thread Weight O.D. UN/UNF-2A C2 D I2 M3 M4 Y (steel) Triple-Lok ® PN mm in. T mm mm mm mm mm mm g/1 piece Steel (bar)6 1/4 7/16-20 17 4 26 25 40 11584 WJJTX-WLN-S 50010 3/8 9/16-18 21 8 28 28 46 14756 WJJTX-WLN-S 420 12 1/2 3/4-16 25 10 32 35 54 19 158 8 WJJTX-WLN-S 420 14, 15,16 5/8 7/8-14 29 12 35 40 61 22 309 10 WJJTX-WLN-S 350 18, 20 3/4 1 1/16-12 35 16 40 45 68 27 340 12 WJJTX-WLN-S 350 22, 25 1 1 5/16-12 42 22 40 49 71 36 390 16 WJJTX-WLN-S 280 28, 30, 32 1 1/4 1 5/8-1248 28 41 55 79 4145020 WJJTX-WLN-S280Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLN” (e.g. 16 WJJTX)PN (bar)= PN (MPa)10Tube Thread Thread Weight PN (bar)O.D. UN/UNF-2A UN/UNF-2B C3 D M M5 M10 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T T6 mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 3/16 3/8-24 3/8-24 13 3 21 25 16 11273 C6X-S 500 — 6 1/4 7/16-20 7/16-20 16 4 23 25 17 11 37 4C6MXS 4C6MXSS 500 350 8 5/16 1/2-20 1/2-20 17 6 24 27 17 13 43 5C6MXS 5C6MXSS 420 350 10 3/8 9/16-18 9/16-18 19 8 27 32 22 14 54 6C6MXS 6C6MXSS 350 350 12 1/2 3/4-16 3/4-16 22 10 32 35 24 19 105 8C6MXS 8C6MXSS 350 350 14, 15,16 5/8 7/8-14 7/8-14 27 12 37 41 28 22 162 10C6MXS 10C6MXSS 350 350 18, 20 3/4 1 1/16-12 1 1/16-12 32 16 42 44 30 27 260 12C6MXS 12C6MXSS 350 350 22 7/8 1 3/16-12 1 3/16-12 35 18 46 45 34 33 293 14 C6X-S 250 — 25 1 1 5/16-12 1 5/16-12 38 22 46 51 36 33 420 16C6MXS 16C6MXSS 250 250 28, 30, 32 1 1/4 1 5/8-12 1 5/8-12 50 28 52 59 43 41 679 20 C6X-S 20C6MXSS 250 210 35, 38 1 1/2 1 7/8-12 1 7/8-12 57 33 59 66 47 48 747 24 C6X-S 24C6MXSS 170 140 22 1/2-12 2 1/2-12 73 45 78 89 62 6692032 C6X-S 110 —Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.C6MX Swivel nut elbowTriple-Lok ® 37° Flare end / Triple-Lok ® 37° Flare female swivel end SAE 070221 MS51521KTube Thread Thread Weight PN (bar) O.D. UN/UNF-2A UN/UNF-2B C3 D M2 M6 M11 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T T6 mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 6 1/4 7/16-20 7/16-20 14 4 18 24 15 11 30 4 V6X-S 4 V6X-SS 500 350 8 5/16 1/2-20 1/2-20 16 6 20 25 16 14 45 5 V6X-S 5 V6X-SS 420 350 10 3/8 9/16-18 9/16-18 19 8 21 28 19 14 47 6 V6X-S 6 V6X-SS 350 350 12 1/2 3/4-16 3/4-16 22 10 25 33 22 19 89 8V6MXS 8 V6X-SS 350 350 14, 15,16 5/8 7/8-14 7/8-14 27 12 28 37 24 22 131 10 V6X-S 10 V6X-SS 350 350 18, 20 3/4 1 1/16-12 1 1/16-12 32 16 33 38 24 27 203 12 V6X-S 12 V6X-SS 350 350 22 7/8 1 3/16-12 1 3/16-12 35 18 35 41 28 30 291 14 V6X-S 250 — 25 1 1 5/16-12 1 5/16-12 38 22 37 44 29 33 335 16 V6X-S 16 V6X-SS 250 250 28, 30, 32 1 1/4 1 5/8-12 1 5/8-12 51 27 40 52 36 41 572 20 V6X-S 20 V6X-SS 250 210 35, 38 1 1/2 1 7/8-12 1 7/8-12 57 33 45 58 39 48 715 24 V6X-S 24 V6X-SS 170 140 2 2 1/2-12 2 1/2-12 72 45 56 70 50 66 960 32 V6X-S 32 V6X-SS 110 110Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.V6MX 45° Swivel nut elbowTriple-Lok ® 37° Flare end / Triple-Lok ® 37° Flare female swivel endSAE 070321 MS51522Tube Thread Thread Weight PN (bar)O.D. UN/UNF-2A UN/UNF-2B C3 D M M5 M10 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T T6 mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 6 1/47/16-20 7/16-20 16 4 23 25 17 11 44 4 S6X-S 4 S6X-SS 500 350 8 5/161/2-20 1/2-20 17 6 24 27 17 13 58 5S6MXS 5 S6X-SS 420 350 10 3/89/16-18 9/16-18 19 8 27 32 22 14 71 6S6MXS 6 S6X-SS 350 350 12 1/23/4-16 3/4-16 22 10 32 35 24 19 133 8S6MXS 8 S6X-SS 350 350 14, 15,16 5/87/8-14 7/8-14 27 12 37 41 28 22 203 10S6MXS 10 S6X-SS 350 350 18, 20 3/41 1/16-12 1 1/16-12 32 16 42 44 30 27 328 12S6MXS 12 S6X-SS 350 350 25 11 5/16-12 1 5/16-12 38 22 46 51 36 33 483 16S6MXS 16 S6X-SS 250 250 28, 30, 32 1 1/41 5/8-12 1 5/8-12 50 28 52 59 43 41 708 20 S6X-S 20 S6X-SS 250 210 35, 38 1 1/2 1 7/8-12 1 7/8-12 57 33 59 68 49 48 1100 24 S6X-S 24 S6X-SS 170 170Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar) = PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.S6MX Swivel nut branch teeTriple-Lok ® 37° Flare ends / Triple-Lok ® 37° Flare female swivel endSAE 070433 MS51524KTube Thread Thread Weight PN (bar) O.D. UN/UNF-2A UN/UNF-2B C3 D M M5 M10 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T T6 mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 6 1/4 7/16-20 7/16-20 16 4 23 25 17 11 44 4 R6X-S 4 R6X-SS 500 350 8 5/16 1/2-20 1/2-20 17 6 24 27 17 13 56 5R6MXS 5 R6X-SS 420 350 10 3/8 9/16-18 9/16-18 19 8 27 32 22 14 69 6R6MXS 6 R6X-SS 350 350 12 1/2 3/4-16 3/4-16 22 10 32 35 24 19 136 8R6MXS 8 R6X-SS 350 350 14, 15,16 5/8 7/8-14 7/8-14 27 12 37 41 28 22 207 10R6MXS 10 R6X-SS 350 350 18, 20 3/4 1 1/16-12 1 1/16-12 32 16 42 44 30 27 319 12R6MXS 12 R6X-SS 350 350 22 7/8 1 3/16-12 1 3/16-12 35 18 46 45 34 33 622 14 R6X-S 14 R6X-SS 250 250 25 1 1 5/16-12 1 5/16-12 38 22 46 51 36 33 489 16R6MXS 16 R6X-SS 250 250 28, 30, 32 1 1/4 1 5/8-12 1 5/8-12 50 28 52 59 43 41 712 20R6MXS 20 R6X-SS 250 210 35, 38 1 1/2 1 7/8-12 1 7/8-12 57 33 59 66 47 48 1100 24 R6X-S 24 R6X-SS 170 170Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.R6MX Swivel nut run teeTriple-Lok ® 37° Flare ends / Triple-Lok ® 37° Flare female swivel endSAE 070432KKTubeThread Thread Weight PN (bar) O.D.Metric UN/UNF-2A L D C U (steel) Triple-Lok ® Triple-Lok ® mm in. T87 T mm mm mm mm g/1 piece Steel Stainless Steel S SS 6 1/4 M10 × 1.0 7/16-20 30 14 14 9 25 4M10F87OMXS 4M10F87OMXSS 500 350 8 5/16 M10 × 1.0 1/2-20 30 14 14 9 30 5M10F87OMXS 5M10F87OMXSS 420 350 8 5/16 M12 × 1.5 1/2-20 33 14 19 11 37 5M12F87OMXS 5M12F87OMXSS 420 350 8 5/16 M14 × 1.5 1/2-20 34 14 19 11 40 5M14F87OMXS 5M14F87OMXSS 420 350 10 3/8 M14 × 1.5 9/16-18 34 14 19 11 44 6M14F87OMXS 6M14F87OMXSS 420 350 10 3/8 M16 × 1.5 9/16-18 36 14 22 12 53 6M16F87OMXS 6M16F87OMXSS 420 350 10 3/8 M18 × 1.5 9/16-18 37 14 24 13 60 6M18F87OMXS 6M18F87OMXSS 350 350 12 1/2 M14 × 1.5 3/4-16 36 17 19 11 41 8M14F87OMXS 8M14F87OMXSS 420 350 12 1/2 M16 × 1.5 3/4-16 38 17 22 12 57 8M16F87OMXS 8M16F87OMXSS 420 350 12 1/2 M18 × 1.5 3/4-16 39 17 24 13 71 8M18F87OMXS 8M18F87OMXSS 350 350 14, 15,16 5/8 M14 × 1.5 7/8-14 41 19 24 11 73 10M14F87OMXS 10M14F87OMXSS 350 350 14, 15,16 5/8 M18 × 1.5 7/8-14 43 19 24 13 75 10M18F87OMXS 10M18F87OMXSS 350 350 14, 15,16 5/8 M22 × 1.5 7/8-14 44 19 27 13 98 10M22F87OMXS 10M22F87OMXSS 350 350 14, 15,16 5/8 M27 × 2.0 7/8-14 46 19 32 16 75 10M27F87OMXS 10M27F87OMXSS 350 350 18, 20 3/4 M22 × 1.5 1 1/16-12 48 22 27 13 104 12M22F87OMXS 12M22F87OMXSS 350 350 18, 20 3/4 M27 × 2.0 1 1/16-12 51 22 32 16 158 12M27F87OMXS 12M27F87OMXSS 350 350 25 1 M27 × 2.0 1 5/16-12 51 23 36 16 206 16M27F87OMXS 16M27F87OMXSS 280 280 25 1 M33 × 2.0 1 5/16-12 53 23 41 16 273 16M33F87OMXS 16M33F87OMXSS 280 280 28, 30, 32 1 1/4 M42 × 2.0 1 5/8-12 55 24 50 16 431 20M42F87OMXS 20M42F87OMXSS 280 210 35, 38 1 1/2 M48 × 2.0 1 7/8-12 59 28 55 18 564 24M48F87OMXS 24M48F87OMXSS 210 140Steel, stainless steel and brass Triple-Lok ® parts are delivered with NBR elastomeric seals as standard. For more details on other seal materials see page K93.Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar) = PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.F87OMX Male stud connectorTriple-Lok ® 37° Flare end / Male metric thread – O-ring (ISO 6149)KTube Thread Thread Weight PN (bar) O.D. UN/UNF-2A UN/UNF-2A C4 D D2 L5 LL (steel) Triple-Lok ® Triple-Lok ®mm in. T5 T mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 1/8 5/16-24 5/16-24 11 2 2 27 19 8 2 F5OX-S 500 — 3/16 3/8-24 3/8-24 13 3 3 28 20 10 3 F5OX-S 500 — 3/16 5/16-24 3/8-24 13 3 2 28 20 9 3-2 F5OX-S 500 — 6 1/4 7/16-20 7/16-20 14 4 4 31 22 15 4F5OMXS 4F5OMXSS 500 350 6 1/4 3/8-24 7/16-20 14 5 3 30 23 12 4-3 F5OX-S 4-3F5OMXSS 500 350 6 1/4 1/2-20 7/16-20 16 4 6 31 22 25 4-5 F5OX-S 4-5F5OMXSS 420 350 6 1/4 9/16-18 7/16-20 17 4 4 33 23 27 4-6F5OMXS 4-6F5OMXSS 420 350 6 1/4 3/4-16 7/16-20 22 4 10 35 24 35 4-8 F5OX-S 4-8F5OMXSS 420 350 6 1/4 7/8-14 7/16-20 25 5 5 38 25 60 4-10 F5OX-S 4-10F5OMXSS 350 350 8 5/16 1/2-20 1/2-20 16 6 6 31 22 18 5F5OMXS 5F5OMXSS 420 350 8 5/16 7/16-20 1/2-20 14 6 5 31 22 18 5-4 F5OX-S 5-4F5OMXSS 420 350 8 5/16 9/16-18 1/2-20 17 6 6 33 23 25 5-6 F5OX-S 5-6F5OMXSS 420 350 8 5/16 3/4-16 1/2-20 22 6 6 35 24 40 5-8 F5OX-S 5-8F5OMXSS 420 350 10 3/8 9/16-18 9/16-18 17 8 8 33 23 25 6F5OMXS 6F5OMXSS 420 350 10 3/8 7/16-20 9/16-18 16 8 4 32 23 40 6-4 F5OX-S 6-4F5OMXSS 420 350 10 3/8 1/2-20 9/16-18 16 8 6 32 23 56 6-5 F5OX-S 6-5F5OMXSS 420 350 10 3/8 3/4-16 9/16-18 22 8 8 35 24 44 6-8F5OMXS 6-8F5OMXSS 420 350 10 3/8 7/8-14 9/16-18 25 8 12 38 25 85 6-10 F5OX-S 6-10F5OMXSS 350 350 10 3/8 1 1/16-12 9/16-18 32 8 16 42 27 100 6-12 F5OX-S 6-12F5OMXSS 350 350 12 1/2 3/4-16 3/4-16 22 10 10 38 27 58 8F5OMXS 8F5OMXSS 420 350 12 1/2 7/16-20 3/4-16 21 10 5 38 29 40 8-4 F5OX-S 8-4F5OMXSS 420 350 12 1/2 9/16-18 3/4-16 19 10 10 37 27 44 8-6F5OMXS 8-6F5OMXSS 420 350 12 1/2 7/8-14 3/4-16 27 10 10 41 28 73 8-10F5OMXS 8-10F5OMXSS 350 350 12 1/2 1 1/16-12 3/4-16 32 10 10 45 30 126 8-12F5OMXS 8-12F5OMXSS 350 350 12 1/2 1 5/16-12 3/4-16 41 10 10 45 30 160 8-16 F5OX-S 8-16F5OMXSS 310 310 14, 15,16 5/8 7/8-14 7/8-14 27 12 12 43 31 75 10F5OMXS 10F5OMXSS 350 350 14, 15,16 5/8 9/16-18 7/8-14 18 13 8 43 34 60 10-6 F5OX-S 10-6F5OMXSS 350 350 14, 15,16 5/8 3/4-16 7/8-14 24 12 10 42 31 65 10-8F5OMXS 10-8F5OMXSS 350 350 14, 15,16 5/8 1 1/16-12 7/8-14 32 12 12 47 32 132 10-12F5OMXS 10-12F5OMXSS 350 350 14, 15,16 5/8 1 5/16-12 7/8-14 41 13 13 48 33 170 10-16 F5OX-S 10-16F5OMXSS 310 310 18, 20 3/4 1 1/16-12 1 1/16-12 32 16 16 50 35 134 12F5OMXS 12F5OMXSS 350 350 18, 20 3/4 3/4-16 1 1/16-12 29 16 10 49 38 104 12-8 F5OX-S 12-8F5OMXSS 350 350 18, 20 3/4 7/8-14 1 1/16-12 27 16 12 48 35 108 12-10F5OMXS 12-10F5OMXSS 350 350 18, 20 3/4 1 3/16-12 1 1/16-12 35 16 16 50 35 170 12-14 F5OX-S 12-14F5OMXSS 310 310 18, 20 3/4 1 5/16-12 1 1/16-12 38 16 16 51 35 197 12-16F5OMXS 12-16F5OMXSS 310 310 18, 20 3/4 1 5/8-12 1 1/16-12 48 16 16 53 38 230 12-20 F5OX-S 12-20F5OMXSS 280 280 22 7/8 1 3/16-12 1 3/16-12 35 18 18 51 36 174 14 F5OX-S 14F5OMXSS 280 280 22 7/8 1 5/16-12 1 3/16-12 38 18 22 51 36 223 14-16 F5OX-S 14-16F5OMXSS 280 280 25 1 1 5/16-12 1 5/16-12 38 22 22 52 37 203 16F5OMXS 16F5OMXSS 280 280 25 1 3/4-16 1 5/16-12 35 22 10 45 34 160 16-8 F5OX-S 16-8F5OMXSS 280 280Continued on page K30F5OMX Male stud connectorTriple-Lok ® 37° Flare end / Male UN/UNF thread – O-ring (ISO 11926)SAE 070120 MS51525。

Parker插装阀样本-逻辑阀LEsection

Parker插装阀样本-逻辑阀LEsection

Catalog HY15-3502/USLogic Elements ContentsParker Hannifin CorporationSERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.LPM/GPM BAR/PSIPOPPET TYPE10SLC1-A.........C10-3S........Normally Closed, Pilot to Close.......................57/15......240/3500......................LE7 16SLC1-A.........C16-3S........Normally Closed, Pilot to Close.....................189/50......240/3500......................LE8 20SLC1-A.........C20-3S........Normally Closed, Pilot to Close.....................303/80......240/3500......................LE916SLC1-C.........C16-3S........Normally Closed, Vent to Open.....................189/50......240/3500....................LE10SPOOL TYPE10SLC2-A.........C10-3S........Normally Closed, Pilot to Close.......................57/15......240/3500....................LE11 16SLC2-A.........C16-3S........Normally Closed, Pilot to Close.....................189/50......240/3500....................LE12 20SLC2-A.........C20-3S........Normally Closed, Pilot to Close.....................303/80......240/3500....................LE13R04E3...............C10-3S........Normally Closed, Pilot to Close.....................170/45......420/6000....................LE14 R06E3...............C16-3S........Normally Closed, Pilot to Close..................400/106......420/6000....................LE15 R08E3...............C20-3S........Normally Closed, Pilot to Close..................500/132......420/6000....................LE1610SLC2-B.........C10-3S........Normally Closed, Vent to Open.......................57/15......240/3500....................LE17 16SLC2-B.........C16-3S........Normally Closed, Vent to Open.....................189/50......240/3500....................LE18 20SLC2-B.........C20-3S........Normally Closed, Vent to Open.....................303/80......240/3500....................LE19R04F3...............C10-3S........Normally Closed, Vent to Open.....................170/45......420/6000....................LE20 R06F3...............C16-3S........Normally Closed, Vent to Open..................400/106......420/6000....................LE21 R08F3...............C20-3S........Normally Closed, Vent to Open..................500/132......420/6000....................LE2210SLC3-A.........C10-3S........Normally Open, Vent to Close.........................57/15......240/3500....................LE23 16SLC3-A.........C16-3S........Normally Open, Vent to Close.......................189/50......240/3500....................LE24R04H3..............C10-3S........Normally Open, Vent to Close.........................57/15......420/6000....................LE25 R06H3..............C16-3S........Normally Open, Vent to Close.......................160/42......420/6000....................LE2610SLC3-B.........C10-3S........Normally Open, Vent to Close.........................57/15......240/3500....................LE27 16SLC3-B.........C16-3S........Normally Open, Vent to Close.......................189/50......240/3500....................LE28R04G3..............C10-3S........Normally Open, Vent to Close.........................57/15......420/6000....................LE29 R06G3..............C16-3S........Normally Open, Vent to Close.......................160/42......420/6000....................LE30LE1Logic ElementsCatalog HY15-3502/USTechnical TipsParker Hannifin CorporationCatalog HY15-3502/USLogic Elements Technical TipsParker Hannifin CorporationLE2LE3Logic ElementsCatalog HY15-3502/USTechnical TipsParker Hannifin CorporationCatalog HY15-3502/USLogic Elements Technical TipsParker Hannifin CorporationLE4LE5Logic ElementsCatalog HY15-3502/USTechnical TipsParker Hannifin CorporationDIRECTIONAL CONTROL EXAMPLESTHREE-WAY BRIDGE CIRCUITS Circuit 1, with **SLC1A poppet logic element.Circuit 2, with **SLC2A/R0*E3spool logic element.Circuit 3, with **SLC2A/R0*E3spool logic element.NOTE: Pilot pressure must exceed load pressure in order for valve to close.FOUR-WAY BRIDGE CIRCUITSCircuit 1, with **SLC1A poppet logic elements.Circuit 2, with **SLC2A/R0*E3 spool logic elements.Required Flow PathPilot Pressure Applied To PA PB 123Available From CircuitNONOXXYESNO X X XRequired Flow PathPilot Pressure Applied To PA PB 123Available From CircuitNOYESXXNO YES X XPilot Pressure Applied To P1P2P3P4P5Required Flow PathPilot Pressure Applied To P1P2P3P4P5Required Flow PathPilot Pressure Applied To P1P2P3P4P5Required Flow PathYES YES YES YES YESNO NO NO NO NOYES YESNO NO NONONO YES YES NOYES YES YES YESNOYESNONOYES YESNO YES YES NO YESYES YES NO YES YESNO YES YES YES YESNO YES NO YES YESYESNOYESNOYESYES YES YES NO YESYES NO YES YES YESP APBBACBAP APB CPB BP A ACABC ABCABC ABCPP5TP1P2A P3BP4P2A P1PP5TP4BP3ABP T ABPTABP T ABPTABP T ABP T ABP T ABP T ABP T ABPTABP T ABP T ABP T NOTE: Pilot pressure must exceed load pressure in order for valve to close.Catalog HY15-3502/USLogic Elements Technical TipsParker Hannifin CorporationLE6LE7Catalog HY15-3502/USPoppet Type Logic Valve Series 10SLC1-AParker Hannifin CorporationTechnical Information(3)Poppet Type Logic ValveSeries 16SLC1-A Catalog HY15-3502/USParker Hannifin CorporationTechnical Information(3)(2)LE8LE9Catalog HY15-3502/USPoppet Type Logic Valve Series 20SLC1-AParker Hannifin CorporationTechnical Information(1)(3)(2)Poppet Type Logic ValveSeries 16SLC1-C Catalog HY15-3502/USParker Hannifin CorporationTechnical Information(3)(2)LE10LE11Catalog HY15-3502/USSpool Type Logic Valve Series 10SLC2-AParker Hannifin CorporationTechnical InformationSpool Type Logic ValveSeries 16SLC2-A Catalog HY15-3502/USParker Hannifin CorporationTechnical Information(1)(3) (2)LE12LE13Catalog HY15-3502/USSpool Type Logic Valve Series 20SLC2-AParker Hannifin CorporationTechnical InformationSpool Type Logic ValveSeries R04E3Catalog HY15-3502/USParker Hannifin CorporationTechnical InformationLE14LE15Catalog HY15-3502/USSpool Type Logic Valve Series R06E3Parker Hannifin CorporationTechnical InformationSpool Type Logic ValveSeries R08E3Catalog HY15-3502/USParker Hannifin CorporationTechnical InformationLE16LE17Catalog HY15-3502/USSpool Type Logic Valve Series 10SLC2-BParker Hannifin CorporationTechnical Information(1)(3) (2)LE18Parker Hannifin CorporationLE19Parker Hannifin CorporationSeries R04F3Parker Hannifin CorporationTechnical InformationLE20LE21Parker Hannifin CorporationSeries R08F3Parker Hannifin CorporationTechnical InformationLE22LE23Parker Hannifin CorporationSeries 16SLC3-AParker Hannifin CorporationTechnical Information(2)(3) (1)LE24LE25Parker Hannifin CorporationSeries R06H3Parker Hannifin CorporationTechnical InformationLE26LE27Parker Hannifin CorporationLE28Series 16SLC3-BParker Hannifin CorporationTechnical Information (2)(3)(1)LE29Parker Hannifin CorporationLE30Spool Type Logic Valve Series R06G3Catalog HY15-3502/USParker Hannifin CorporationHydraulic Cartridge SystemsTechnical Information。

恩派克样本

恩派克样本

RC系列单作用液压油缸★特有的GR2双重导向环技术能够轻松地吸收偏载,减少磨损,延长油缸寿命。

★外环螺纹、柱塞螺纹和底部安装孔使得定位方便(对多数型号而言)。

★设计为在任何安装位置上使用。

★可拆卸手柄使固定方便(RC-5013,RC-7513和所有95吨型号油缸)。

★高强度合金钢经久耐用。

★高强度复位弹簧。

★烤漆表面耐腐蚀能力更强。

★各型号均包含CR-400快速接头与防尘帽。

★防尘密封圈可减少污染,延长液压缸使用寿命。

RSM&RCS系列单作用薄型液压油缸RSM系列超薄型液压油缸★紧凑扁平设计用于其它液压缸不适用的场合。

★RSM-750/-1000/-1500配有手柄便于搬运。

★安装孔使固定方便。

★所有型号均包含CR-400快速接头与防尘帽,除RSM-50配有AR-400快速接头。

★高质量钢柱塞表面镀硬铬处理。

★沟槽柱塞端面无需鞍座。

★单作用,弹簧回缩。

RCS系列,薄型液压油缸★轻巧紧凑设计用于狭小工作空间。

★烤漆表面增强耐腐蚀能力。

★防尘圈减少污染,延长液压缸使用寿命。

★所有型号均包含CR-400快速接头与防尘帽。

★沟槽柱塞顶部的螺纹孔可用于安装倾斜式鞍座。

★RCS-1002配有手柄便于携带。

★钢柱塞表面镀青铜处理。

★单作用,弹簧回缩。

RCH系列单作用中空柱塞液压油缸★中空柱塞设计既可以用于拉力,又可以用于推力。

★单作用,弹簧回缩。

★对于20吨以上的型号,使用镀镍的浮动中心管增加产品寿命。

★烤漆表面耐腐蚀能力更强。

★外环螺纹使安装方便。

★RCH-120包括AR-630接头,具有1/4NPT油口。

★RCH-121和RCH-1211配有FZ-1630变径接头和AR-630快速接头、其它型号配CR-400接头。

P系列新型钢制手动泵★恩派克新型高压钢制手动泵是棘手工作的首选。

★动力推进把手,增加舒适度,减少疲劳。

★双速操作,可减少操作者劳动强度(除P-39)。

★免排气储油箱,防止溢漏。

★配有手柄,易于提携。

Parker-美制JIC接头样本

Parker-美制JIC接头样本

Triple-Lok®The universal37° fl ared fi ttingTriple-Lok®Visual indexTube to tubeBulkhead unionTube tomale NPTFTube tomale BSPTTube tomale BSPPTube to straightthread UNFTube tomale metricISO 6149-3Tube tomale metricDIN 3852-1Tube tofemale NPTFHMTX EMTX JMTX KTXp. K9 p. K10 p. K11 p. K14WMTX WEMTX WNTX WJTX WJJTX WLNMp.K15 p.K16 p.K17 p.K18 p.K19 p.K92FMTX CMTXC CTX CCCTX VMTX RMTX SMTXp.K36 p.K51 p.K52 p.K53 p.K59 p.K71 p.K65F3MX C3MX V3MX R3MX S3MXp.K37 p.K54 p.K60 p.K72 p.K66F4OMX F42EDMX C4OMX V4OMX R4OMX S4OMXp.K33 p.K32 p.K49 p.K57 p.K69 p.K63F5OMX FF5OMX C5OMX CC5OX V5OMX R5OMX S5OMX p.K29 p.K31 p.K47 p.K48 p.K56 p.K68 p.K62F87OMX C87OMX V87OMX R87OMX S87OMXp.K28 p.K46 p.K55 p.K67 p.K61F8OMX F82EDMX C8OMX V8OMX R8OMX S8OMXp.K35 p.K34 p.K50 p.K58 p.K70 p.K64GMTX WGMTX DMTX OTX MTX G6Xp.K74 p.K75 p.K76 p.K77 p.K78 p.K79KTriple-Lok ®Triple-Lok®KTriple-Lok ®BTX NutTriple-Lok ® 37° Flare end nut SAE 070110 MS51531Tube Thread Weight O.D. UN/UNF-2B C D L (steel) Triple-Lok ® Triple-Lok ® Triple-Lok ® mm in. T6 in. mm mm g/1 piece Steel Stainless Steel Brass 1/8 5/16-24 3/8 5 14 6 2 BTX-S 2 BTX-SS2 BTX-B 3/16 3/8-24 7/16 6 16 83 BTX-S 3 BTX-SS 3 BTX-B 6 1/4 7/16-20 9/16 8 16 11 4 BTX-S 4 BTX-SS 4 BTX-B 8 5/16 1/2-20 5/8 10 17 145 BTX-S 5 BTX-SS 5 BTX-B 10 3/8 9/16-18 11/16 11 18 18 6 BTX-S 6 BTX-SS 6 BTX-B 12 1/2 3/4-16 7/8 15 22 29 8 BTX-S 8 BTX-SS 8 BTX-B 14, 15, 16 5/8 7/8-14 1 18 25 54 10 BTX-S 10 BTX-SS 10 BTX-B 18, 20 3/4 1 1/16-12 1 1/4 21 26 73 12 BTX-S 12 BTX-SS 12 BTX-B 22 7/8 1 3/16-12 1 3/8 24 28 100 14 BTX-S 14 BTX-SS 14 BTX-B 25 1 1 5/16-12 1 1/2 28 29 104 16 BTX-S 16 BTX-SS 16 BTX-B 28, 30, 32 1 1/4 1 5/8-12 2 34 31 240 20 BTX-S 20 BTX-SS 20 BTX-B 35, 38 1 1/2 1 7/8-12 2 1/4 41 36 325 24 BTX-S 24 BTX-SS 24 BTX-B2 2 1/2-12 2 7/8 55 45 549 32 BTX-S32 BTX-SSOrder codes shown are part of our current manufacturing programme.Triple-Lok®BMTX NutTriple-Lok® 37° Flare end nutSAE 070110Tube Thread WeightO.D. UN/UNF-2B C D L (steel) Triple-Lok® Triple-Lok®Steelpiece Steel Stainless mm in. T6 mm mm mm g/16 1/4 7/16-20 14 8 16 11 4BMTXS 4BMTXSS8 5/16 1/2-20 17 10 17 14 5BMTXS 5BMTXSS10 3/8 9/16-18 19 11 18 18 6BMTXS 6BMTXSS12 1/2 3/4-16 22 15 21 29 8BMTXS 8BMTXSS14, 15, 16 5/8 7/8-14 27 18 25 42 10BMTXS 10BMTXSS 18, 20 3/4 1 1/16-12 32 22 26 73 12BMTXS 12BMTXSS5/16-12 41 28 28 104 16BMTXS 16BMTXSS25 1 128, 30, 32 1 1/4 1 5/8-12 50 34 31 240 20BMTXS 20BMTXSS 35, 38 1 1/2 1 7/8-12 60 41 36 325 24BMTXS 24BMTXSS42 21/4 65 48 40 437 28BMTXS 28BMTXSSOrder codes shown are part of our current manufacturing programme.KTriple-Lok ®Tube WeightO.D. L X (steel) Triple-Lok ® Triple-Lok ® Triple-Lok ®mm mm mm g/1 piece Steel Stainless Steel Brass 6 10 10 2 TXS6 TXSS6 TXB6 8 11 11 2 TXS8 TXSS8 TXB8 10 13 13 2 TXS10 TXSS10 TXB10 12 14 17 7 TXS12 TXSS12 TXB12 14 17 20 13 TXS14 TXSS14 TXB14 15 17 20 10 TXS15 TXSS15 TXB15 16 17 20 7 TXS16 TXSS16 TXB16 18 17 25 16 TXS18 TXSS18 TXB18 20 17 25 12 TXS20 TXSS20 TXB20 22 19 28 25 TXS22 TXSS22 TXB22 25 20 31 21 TXS25 TXSS25 TXB25 28 23 39 40 TXS28 TXSS28 TXB28 30 23 39 45 TXS30 TXSS30 TXB30 32 23 39 30 TXS32 TXSS32 TXB32 35 28 45 60 TXS35 TXSS35 TXB35 38 28 45 51 TXS38 TXSS38 TXB38 422955149TXS42 TXSS42 TXB42Order codes shown are part of our current manufacturing programme.TX SleeveTriple-Lok ® 37° Flare tube end sleeve for metric tubes SAE 070105Triple-Lok ®Tube WeightO.D. L X (steel) T riple-Lok ® Triple-Lok ® Triple-Lok ® in. mm mm g/1 piece Steel Stainless Steel Brass 1/8 9 7 22 TX-S 2 TX-SS 2 TX-B 3/169823 TX-S 3 TX-SS 3 TX-B 1/4 10 10 2 4 TX-S 4 TX-SS 4 TX-B 5/16 11 11 25 TX-S 5 TX-SS 5 TX-B 3/8 13 13 36 TX-S 6 TX-SS 6 TX-B 1/2 14 17 68 TX-S 8 TX-SS 8 TX-B 5/8 17 20 8 10 TX-S 10 TX-SS 10 TX-B 3/4 17 25 13 12 TX-S 12 TX-SS 12 TX-B 7/8 19 28 18 14 TX-S 14 TX-SS 14 TX-B 1 20 31 23 16 TX-S 16 TX-SS 16 TX-B 1 1/4 23 39 30 20 TX-S 20 TX-SS 20 TX-B 1 1/2 28 45 51 24 TX-S 24 TX-SS 24 TX-B 2306115632 TX-S32 TX-SS32 TX-BOrder codes shown are part of our current manufacturing programme.TX SleeveTriple-Lok ® 37° Flare tube sleeve SAE 070105 MS51533KTriple-Lok ®Tube 1 Tube 2 Thread Thread Weight PN (bar)O.D. O.D. UN/UNF-2A UN/UNF-2A C D D1 L1 (steel) Triple-Lok ® Triple-Lok ® Triple-Lok ®mm in. mm in. T1 T2 mm mm mm mm g/1 piece Steel Stainless Steel Brass S SS1/8 1/8 5/16-24 5/16-24 11 2 2 30 9 2 HTX-S 500 —3/16 3/16 3/8-24 3/8-24 11 3 3 31 10 3 HTX-S 500 — 6 1/4 6 1/4 7/16-20 7/16-20 13 4 4 35 16 4HMTXS 4HMTXSS 4HMTXB 500 350 6 1/4 1/8 7/16-20 5/16-24 13 5 2 32 12 4-2 HTX-S 4-2HMTXSS 4-2HMTXB 500 350 6 1/4 3/16 7/16-20 3/8-24 13 5 3 33 14 4-3 HTX-S 4-3HMTXSS 4-3HMTXB 500 350 8 5/16 8 5/16 1/2-20 1/2-20 14 6 6 35 18 5HMTXS 5HMTXSS 5HMTXB 420 350 8 5/16 6 1/4 1/2-20 7/16-20 14 6 5 35 18 5-4 HTX-S 5-4HMTXSS 5-4HMTXB 420 350 10 3/8 10 3/8 9/16-18 9/16-18 17 8 8 36 25 6HMTXS 6HMTXSS 6HMTXB 420 350 10 3/8 6 1/4 9/16-18 7/16-20 17 8 4 36 22 6-4HMTXS 6-4HMTXSS 6-4HMTXB 420 350 10 3/8 8 5/16 9/16-18 1/2-20 17 8 6 36 25 6-5 HTX-S 6-5HMTXSS 6-5HMTXB 420 350 12 1/2 12 1/2 3/4-16 3/4-16 19 10 10 41 52 8HMTXS 8HMTXSS 8HMTXB 420 350 12 1/2 6 1/4 3/4-16 7/16-20 21 10 5 39 45 8-4 HTX-S 8-4HMTXSS 8-4HMTXB 420 350 12 1/2 10 3/8 3/4-16 9/16-18 19 10 8 39 45 8-6HMTXS 8-6HMTXSS 8-6HMTXB 420 350 14, 15,16 5/8 14, 15,16 5/8 7/8-14 7/8-14 24 12 12 48 80 10HMTXS 10HMTXSS 10HMTXB 350 350 14, 15,16 5/8 10 3/8 7/8-14 9/16-18 24 13 8 43 60 10-6HMTXS 10-6HMTXSS 10-6HMTXB 350 350 14, 15,16 5/8 12 1/2 7/8-14 3/4-16 24 12 10 45 68 10-8HMTXS 10-8HMTXSS 10-8HMTXB 350 350 18, 20 3/4 18, 20 3/4 1 1/16-12 1 1/16-12 27 16 16 55 125 12HMTXS 12HMTXSS 12HMTXB 350 350 18, 20 3/4 12 1/2 1 1/16-12 3/4-16 29 16 10 50 101 12-8 HTX-S 12-8HMTXSS 12-8HMTXB 350 350 20 3/4 14, 15,16 5/8 1 1/16-12 7/8-14 29 16 12 52 113 12-10HMTXS 12-10HMTXSS 12-10HMTXB 350 350 22 7/8 22 7/8 1 3/16-12 1 3/16-12 32 18 18 56 156 14 HTX-S 14HMTXSS 14HMTXB 280 280 25 1 25 1 1 5/16-12 1 5/16-12 36 22 22 57 131 16HMTXS 16HMTXSS 16HMTXB 280 280 25 1 20 3/4 1 5/16-12 1 1/16-12 36 22 16 56 169 16-12HMTXS 16-12HMTXSS 16-12HMTXB 280 280 28, 30, 32 1 1/4 28, 30, 32 1 1/4 1 5/8-12 1 5/8-12 46 28 28 62 271 20HMTXS 20HMTXSS 20HMTXB 280 210 28, 30, 32 1 1/4 25 1 1 5/8-12 1 5/16-12 46 28 22 61 235 20-16HMTXS 20-16HMTXSS 20-16HMTXB 280 210 35, 38 1 1/2 35, 38 1 1/2 1 7/8-12 1 7/8-12 50 33 33 70 382 24HMTXS 24HMTXSS 24HMTXB 210 210 42 42 2 1/4-12 2 1/4-12 60 39 39 71 469 28HMTXS 28HMTXSS 28HMTXB 140 150 2 2 2 1/2-12 2 1/2-12 67 45 45 87 785 32 HTX-S 32HMTXSS 32HMTXB 140 150Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.HMTX UnionTriple-Lok ® 37° Flare ends SAE 070101 MS51501Triple-Lok®EMTX Union elbowTriple-Lok® 37° Flare endsSAE 070201 MS51505(bar) Tube Thread Thread Weight PNY(steel)Triple-Lok® Triple-Lok® Triple-Lok®M1MUN/UNF2-ADD1O.D. UN/UNF-2Amm in. T T1 mm in. mm mm mm g/1 piece Steel Stainless Steel Brass S SS 1/8 5/16-24 5/16-24 2 2 20 20 11 18 2 ETX-S 500—— 3/16 3/8-24 3/8-24 3 3 21 21 11 20 3 ETX-S 500500 3506 1/4 7/16-20 7/16-20 4 4 23 23 11 25 4EMTXS 4EMTXSS 4ETX-B420 350ETX-B8 5/16 1/2-20 1/2-20 6 6 24 24 13 32 5EMTXS 5EMTXSS 5420 35010 3/8 9/16-18 9/16-18 8 8 27 27 14 44 6EMTXS 6EMTXSS 6ETX-B10 3/8 9/16-18 7/16-20 8 4 27 27 14 40 6-4 ETX-S 6-4EMTXSS 6-4 ETX-B 420 350420 350ETX-B12 1/2 3/4-16 3/4-16 10 10 32 32 19 88 8EMTXS 8EMTXSS 812 1/2 3/4-16 3/8-24 10 8 32 29 19 75 8-6 ETX-S 8-6EMTXSS 420 —350 350ETX-B 15,16 5/8 7/8-14 7/8-14 12 12 37 37 22 139 10EMTXS 10EMTXSS 1014,15,16 5/8 7/8-14 3/4-16 12 10 37 34 22 120 10-8 ETX-S 10-8EMTXSS 10-8 ETX-B 350 35014,ETX-B350 3501/16-12 16 16 42 42 27 258 12EMTXS 12EMTXSS 121/16-12 118,20 3/4 11/16-12 3/4-16 16 10 42 46 27 220 12-8 ETX-S 12-8EMTXSS 350 —20 3/4 118,1/16-12 7/8-14 16 12 42 39 27 240 12-10 ETX-S 12-10EMTXSS 350 —20 3/4 118,3/16-12 18 18 44 44 30 273 14 ETX-S 14EMTXSS 280 —22 7/8 13/16-12 1ETX-B280 2805/16-12 22 22 46 46 33 333 16EMTXS 16EMTXSS 165/16-12 125 1 122,5/16-12 11/16-12 22 16 46 45 33 310 16-12 ETX-S 16-12EMTXSS 16-12 ETX-B 280 28025 1 122,ETX-B280 21028, 30, 32 1 1/4 1 5/8-12 1 5/8-12 28 28 52 52 41 586 20EMTXS 20EMTXSS 20210 140ETX-B 35, 38 1 1/2 1 7/8-12 1 7/8-12 33 33 59 59 48 778 24EMTXS 24EMTXSS 24—1/4-12 21/4-12 39 39 74 74 63 1100 28 ETX-S 140 3/4 242 1—1/2-12 45 45 78 78 64 1680 32 ETX-S 1402 21/2-12 2Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.KKKTX Union crossTriple-Lok® 37° Flare end (four ends)SAE 070501 MS51517Tube Thread Weight PN(bar)Triple-Lok® Triple-Lok® Triple-Lok®(steel)O.D. UN/UNF-2AD M YSSSteel Brass Spiece Steel Stainless mm in. T mm mm mm g/11/4 7/16-20 4 23 11 41 4 KTX-S 4 KTX-SS 4 KTX-B 500 35065/16 1/2-20 6 24 14 50 5 KTX-S 5 KTX-SS 5 KTX-B 420 350810 3/8 9/16-18 8 27 14 68 6 KTX-S 6 KTX-SS 6 KTX-B 420 35012 1/2 3/4-16 10 32 19 144 8 KTX-S 8 KTX-SS 8 KTX-B 420 35014, 15,16 5/8 7/8-14 12 37 22 220 10 KTX-S 10 KTX-SS 10 KTX-B 350 350 18, 20 3/4 1 1/16-12 16 42 27 345 12 KTX-S 12 KTX-SS 12 KTX-B 350 350 5/16-12 22 46 33 588 16 KTX-S 16 KTX-SS 16 KTX-B 280 28025 1 1Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.KMaximum bulkhead wallthicknessTube O.D. Straight bulkhead unionShape bulkhead unionMax. thicknessMax. thicknessSize inch metric mmmm4 1/4 6 8.4 5.35 5/16 8 8.4 5.3 6 3/8 10 10.7 7.18 1/2 12 11.2 8.4 10 5/8 14–16 10.9 8.1 12 3/4 18–2011.2 8.6 14 7/8 10.4 7.9 16 1 22–25 9.9 7.4 20 1 1/4 28–32 10.2 7.4 24 1 1/235–387.1 — 3227.1—WMTX Bulkhead unionTriple-Lok ® 37° Flare ends SAE 070601 MS51520Tube Thread WeightPN (bar) O.D. UN/UNF-2A C2 D I1 L4 (steel) Triple-Lok ® Triple-Lok ® Triple-Lok ®mm in. T mm mm mm mm g/1 piece Steel Stainless Steel BrassS SS6 1/4 7/16-20 17 4 31 53 41 4WMTXWLNMS 4WMTXWLNMSS 4WMTXWLNMB 500 3508 5/16 1/2-20 19 6 31 53 49 5WMTXWLNMS 5WMTXWLNMSS 5WMTXWLNMB 420 350 10 3/8 9/16-18 22 8 33 55 64 6WMTXWLNMS 6WMTXWLNMSS 6WMTXWLNMB 420 350 12 1/2 3/4-16 24 10 37 62 111 8WMTXWLNMS 8WMTXWLNMSS 8WMTXWLNMB 420 350 14, 15,16 5/8 7/8-14 30 12 40 70 157 10WMTXWLNMS 10WMTXWLNMSS 10WMTXWLNMB 350 350 18, 20 3/4 1 1/16-12 36 16 44 79 254 12WMTXWLNMS 12WMTXWLNMSS 12WMTXWLNMB 350 350 22 7/8 1 3/16-12 38 18 45 80 296 14 WTX-WLN-S 14WMTXWLNMSS 14WMTXWLNMB 280 280 25 1 1 5/16-12 41 22 44 80 337 16WMTXWLNMS 16WMTXWLNMSS 16WMTXWLNMB 280 280 28, 30, 32 1 1/4 1 5/8-12 50 28 46 84 462 20WMTXWLNMS 20WMTXWLNMSS 20WMTXWLNMB 280 210 35, 38 1 1/2 1 7/8-12 55 33 46 89 695 24WMTXWLNMS 24WMTXWLNMSS 24WMTXWLNMB 210 140Order codes shown are part of our current manufacturing programme. Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLNM” (e. g. 16WMTX)PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.WEMTX Bulkhead union elbowTriple-Lok® 37° Flare endsSAE 070701 MS51507(bar) Tube Thread Weight PNM4YM3(steel) Triple-Lok® Triple-Lok® Triple-Lok®I2C2O.D. UN/UNF-2ADmm in. T mm mm mm mm mm mm g/1 piece Steel Stainless Steel Brass S SS6 1/4 7/16-20 17 4 26 25 40 11 44 4 WETX-WLN-S 4 WETX-WLN-SS 4 WETX-WLN-B 500 3508 5/16 1/2-20 19 6 26 27 44 13 59 5 WETX-WLN-S 5 WETX-WLN-SS 5 WETX-WLN-B 420 35010 3/8 9/16-18 22 8 28 28 46 14 72 6WEMTXWLNMS 6 WETX-WLN-SS 6 WETX-WLN-B 420 35012 1/2 3/4-16 24 10 32 36 54 19 145 8WEMTXWLNMS 8 WETX-WLN-SS 8 WETX-WLN-B 420 350 14,15,16 5/8 7/8-14 30 12 35 40 61 22 212 10WEMTXWLNMS 10 WETX-WLN-SS 10 WETX-WLN-B 350 350 1/16-12 36 16 40 45 68 27 345 12WEMTXWLNMS 12 WETX-WLN-SS 12 WETX-WLN-B 350 35020 3/4 118,3/16-12 38 18 40 49 71 33 370 14 WETX-WLN-S 14 WETX-WLN-SS 280 —22 7/8 15/16-12 41 22 40 49 71 33 474 16 WETX-WLN-S 16 WETX-WLN-SS 280 —25 1 128, 30, 32 1 1/4 1 5/8-12 48 28 41 55 80 41 753 20 WETX-WLN-S 20 WETX-WLN-SS 280 —Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLNM” (e. g. 16WETX)PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.Maximum bulkhead wallthicknessTube O.D. Straight bulkhead union Shape bulkhead unionMax. thickness Max. thicknessSize inch metric mm mm4 1/4 6 8.4 5.35 5/16 8 8.4 5.36 3/8 10 10.7 7.18 1/2 12 11.2 8.410 5/8 14–16 10.9 8.112 3/4 18–20 11.2 8.614 7/8 10.4 7.916 1 22–25 9.9 7.41/4 28–32 10.2 7.420 11/2 35–38 7.1 —24 132 2 7.1 —KMaximum bulkhead wallthicknessTube O.D. Straight bulkhead unionShape bulkhead unionMax. thicknessMax. thicknessSize inch metric mmmm4 1/4 6 8.4 5.35 5/16 8 8.4 5.3 6 3/8 10 10.7 7.18 1/2 12 11.2 8.4 10 5/8 14–16 10.9 8.1 12 3/4 18–2011.2 8.6 14 7/8 10.4 7.9 16 1 22–25 9.9 7.4 20 1 1/4 28–32 10.2 7.4 24 1 1/235–387.1 — 3227.1—WNTX 45° Bulkhead union elbowTriple-Lok ® 37° Flare ends SAE 070801 MS51509Tube Thread WeightPN (bar) O.D. UN/UNF-2A C2 D I2 M2 M9 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS6 1/4 7/16-20 17 4 26 18 39 11 324 WNTX-WLN-S 4 WNTX-WLN-SS 500 350 8 5/16 1/2-20 19 6 26 20 42 14 415 WNTX-WLN-S 420 —10 3/8 9/16-18 21 8 28 21 42 14 48 6 WNTX-WLN-S 6 WNTX-WLN-SS 420 350 12 1/2 3/4-16 25 10 32 25 49 19 105 8 WNTX-WLN-S 8 WNTX-WLN-SS 420 350 14, 15,16 5/8 7/8-14 29 12 35 28 55 22 152 10 WNTX-WLN-S 10 WNTX-WLN-SS 350 350 18, 20 3/4 1 1/16-12 35 16 40 33 62 27 245 12 WNTX-WLN-S 12 WNTX-WLN-SS 350 350 22, 25 1 1 5/16-12 41 22 40 37 65 33 355 16 WNTX-WLN-S 16 WNTX-WLN-SS 280 28028, 30, 321 1/41 5/8-12 48 28 41 40 67 4146520 WNTX-WLN-S280 —Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLN” (e.g. 16 WNTX)PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.Maximum bulkhead wallthicknessTube O.D. Straight bulkhead unionShape bulkhead unionMax. thicknessMax. thicknessSize inch metric mmmm4 1/4 6 8.4 5.35 5/16 8 8.4 5.3 6 3/8 10 10.7 7.18 1/2 12 11.2 8.4 10 5/8 14–16 10.9 8.1 12 3/4 18–2011.2 8.6 14 7/8 10.4 7.9 16 1 22–25 9.9 7.4 20 1 1/4 28–32 10.2 7.4 24 1 1/235–387.1 — 3227.1—WJTX Bulkhead branch teeTriple-Lok ® 37° Flare ends SAE 070959 MS51515Tube Thread WeightPN (bar) O.D. UN/UNF-2A C2 D I2 M3 M4 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS6 1/4 7/16-20 17 4 26 25 40 11 454 WJTX-WLN-S 4 WJTX-WLN-SS 500 35010 3/8 9/16-18 21 8 28 28 46 14 71 6 WJTX-WLN-S 6 WJTX-WLN-SS 420 350 12 1/2 3/4-16 25 10 32 35 54 19 158 8 WJTX-WLN-S 8 WJTX-WLN-SS 420 350 14, 15,16 5/8 7/8-14 29 12 35 40 61 22 297 10 WJTX-WLN-S 10 WJTX-WLN-SS 350 350 18, 20 3/4 1 1/16-12 35 16 40 45 68 27 379 12 WJTX-WLN-S 12 WJTX-WLN-SS 350 35022, 25 1 1 5/16-12 42 22 40 49 71 33 420 16 WJTX-WLN-S 280 — 28, 30, 321 1/41 5/8-12 48 28 41 55 79 4150020 WJTX-WLN-S280 —Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLN” (e.g. 16 WJTX)PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.KMaximum bulkhead wallthicknessTube O.D. Straight bulkhead unionShape bulkhead unionMax. thicknessMax. thicknessSize inch metric mmmm4 1/4 6 8.4 5.35 5/16 8 8.4 5.3 6 3/8 10 10.7 7.18 1/2 12 11.2 8.4 10 5/8 14–16 10.9 8.1 12 3/4 18–2011.2 8.6 14 7/8 10.4 7.9 16 1 22–25 9.9 7.4 20 1 1/4 28–32 10.2 7.4 24 1 1/235–387.1 — 3227.1—WJJTX Bulkhead run teeTriple-Lok ® 37° Flare ends SAE 070958 MS51516Tube Thread Weight O.D. UN/UNF-2A C2 D I2 M3 M4 Y (steel) Triple-Lok ® PN mm in. T mm mm mm mm mm mm g/1 piece Steel (bar)6 1/4 7/16-20 17 4 26 25 40 11584 WJJTX-WLN-S 50010 3/8 9/16-18 21 8 28 28 46 14756 WJJTX-WLN-S 420 12 1/2 3/4-16 25 10 32 35 54 19 158 8 WJJTX-WLN-S 420 14, 15,16 5/8 7/8-14 29 12 35 40 61 22 309 10 WJJTX-WLN-S 350 18, 20 3/4 1 1/16-12 35 16 40 45 68 27 340 12 WJJTX-WLN-S 350 22, 25 1 1 5/16-12 42 22 40 49 71 36 390 16 WJJTX-WLN-S 280 28, 30, 32 1 1/4 1 5/8-1248 28 41 55 79 4145020 WJJTX-WLN-S280Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLN” (e.g. 16 WJJTX)PN (bar)= PN (MPa)10Tube Thread Thread Weight PN (bar)O.D. UN/UNF-2A UN/UNF-2B C3 D M M5 M10 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T T6 mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 3/16 3/8-24 3/8-24 13 3 21 25 16 11273 C6X-S 500 — 6 1/4 7/16-20 7/16-20 16 4 23 25 17 11 37 4C6MXS 4C6MXSS 500 350 8 5/16 1/2-20 1/2-20 17 6 24 27 17 13 43 5C6MXS 5C6MXSS 420 350 10 3/8 9/16-18 9/16-18 19 8 27 32 22 14 54 6C6MXS 6C6MXSS 350 350 12 1/2 3/4-16 3/4-16 22 10 32 35 24 19 105 8C6MXS 8C6MXSS 350 350 14, 15,16 5/8 7/8-14 7/8-14 27 12 37 41 28 22 162 10C6MXS 10C6MXSS 350 350 18, 20 3/4 1 1/16-12 1 1/16-12 32 16 42 44 30 27 260 12C6MXS 12C6MXSS 350 350 22 7/8 1 3/16-12 1 3/16-12 35 18 46 45 34 33 293 14 C6X-S 250 — 25 1 1 5/16-12 1 5/16-12 38 22 46 51 36 33 420 16C6MXS 16C6MXSS 250 250 28, 30, 32 1 1/4 1 5/8-12 1 5/8-12 50 28 52 59 43 41 679 20 C6X-S 20C6MXSS 250 210 35, 38 1 1/2 1 7/8-12 1 7/8-12 57 33 59 66 47 48 747 24 C6X-S 24C6MXSS 170 140 22 1/2-12 2 1/2-12 73 45 78 89 62 6692032 C6X-S 110 —Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.C6MX Swivel nut elbowTriple-Lok ® 37° Flare end / Triple-Lok ® 37° Flare female swivel end SAE 070221 MS51521KTube Thread Thread Weight PN (bar) O.D. UN/UNF-2A UN/UNF-2B C3 D M2 M6 M11 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T T6 mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 6 1/4 7/16-20 7/16-20 14 4 18 24 15 11 30 4 V6X-S 4 V6X-SS 500 350 8 5/16 1/2-20 1/2-20 16 6 20 25 16 14 45 5 V6X-S 5 V6X-SS 420 350 10 3/8 9/16-18 9/16-18 19 8 21 28 19 14 47 6 V6X-S 6 V6X-SS 350 350 12 1/2 3/4-16 3/4-16 22 10 25 33 22 19 89 8V6MXS 8 V6X-SS 350 350 14, 15,16 5/8 7/8-14 7/8-14 27 12 28 37 24 22 131 10 V6X-S 10 V6X-SS 350 350 18, 20 3/4 1 1/16-12 1 1/16-12 32 16 33 38 24 27 203 12 V6X-S 12 V6X-SS 350 350 22 7/8 1 3/16-12 1 3/16-12 35 18 35 41 28 30 291 14 V6X-S 250 — 25 1 1 5/16-12 1 5/16-12 38 22 37 44 29 33 335 16 V6X-S 16 V6X-SS 250 250 28, 30, 32 1 1/4 1 5/8-12 1 5/8-12 51 27 40 52 36 41 572 20 V6X-S 20 V6X-SS 250 210 35, 38 1 1/2 1 7/8-12 1 7/8-12 57 33 45 58 39 48 715 24 V6X-S 24 V6X-SS 170 140 2 2 1/2-12 2 1/2-12 72 45 56 70 50 66 960 32 V6X-S 32 V6X-SS 110 110Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.V6MX 45° Swivel nut elbowTriple-Lok ® 37° Flare end / Triple-Lok ® 37° Flare female swivel endSAE 070321 MS51522Tube Thread Thread Weight PN (bar)O.D. UN/UNF-2A UN/UNF-2B C3 D M M5 M10 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T T6 mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 6 1/47/16-20 7/16-20 16 4 23 25 17 11 44 4 S6X-S 4 S6X-SS 500 350 8 5/161/2-20 1/2-20 17 6 24 27 17 13 58 5S6MXS 5 S6X-SS 420 350 10 3/89/16-18 9/16-18 19 8 27 32 22 14 71 6S6MXS 6 S6X-SS 350 350 12 1/23/4-16 3/4-16 22 10 32 35 24 19 133 8S6MXS 8 S6X-SS 350 350 14, 15,16 5/87/8-14 7/8-14 27 12 37 41 28 22 203 10S6MXS 10 S6X-SS 350 350 18, 20 3/41 1/16-12 1 1/16-12 32 16 42 44 30 27 328 12S6MXS 12 S6X-SS 350 350 25 11 5/16-12 1 5/16-12 38 22 46 51 36 33 483 16S6MXS 16 S6X-SS 250 250 28, 30, 32 1 1/41 5/8-12 1 5/8-12 50 28 52 59 43 41 708 20 S6X-S 20 S6X-SS 250 210 35, 38 1 1/2 1 7/8-12 1 7/8-12 57 33 59 68 49 48 1100 24 S6X-S 24 S6X-SS 170 170Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar) = PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.S6MX Swivel nut branch teeTriple-Lok ® 37° Flare ends / Triple-Lok ® 37° Flare female swivel endSAE 070433 MS51524KTube Thread Thread Weight PN (bar) O.D. UN/UNF-2A UN/UNF-2B C3 D M M5 M10 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T T6 mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 6 1/4 7/16-20 7/16-20 16 4 23 25 17 11 44 4 R6X-S 4 R6X-SS 500 350 8 5/16 1/2-20 1/2-20 17 6 24 27 17 13 56 5R6MXS 5 R6X-SS 420 350 10 3/8 9/16-18 9/16-18 19 8 27 32 22 14 69 6R6MXS 6 R6X-SS 350 350 12 1/2 3/4-16 3/4-16 22 10 32 35 24 19 136 8R6MXS 8 R6X-SS 350 350 14, 15,16 5/8 7/8-14 7/8-14 27 12 37 41 28 22 207 10R6MXS 10 R6X-SS 350 350 18, 20 3/4 1 1/16-12 1 1/16-12 32 16 42 44 30 27 319 12R6MXS 12 R6X-SS 350 350 22 7/8 1 3/16-12 1 3/16-12 35 18 46 45 34 33 622 14 R6X-S 14 R6X-SS 250 250 25 1 1 5/16-12 1 5/16-12 38 22 46 51 36 33 489 16R6MXS 16 R6X-SS 250 250 28, 30, 32 1 1/4 1 5/8-12 1 5/8-12 50 28 52 59 43 41 712 20R6MXS 20 R6X-SS 250 210 35, 38 1 1/2 1 7/8-12 1 7/8-12 57 33 59 66 47 48 1100 24 R6X-S 24 R6X-SS 170 170Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.R6MX Swivel nut run teeTriple-Lok ® 37° Flare ends / Triple-Lok ® 37° Flare female swivel endSAE 070432KKTubeThread Thread Weight PN (bar) O.D.Metric UN/UNF-2A L D C U (steel) Triple-Lok ® Triple-Lok ® mm in. T87 T mm mm mm mm g/1 piece Steel Stainless Steel S SS 6 1/4 M10 × 1.0 7/16-20 30 14 14 9 25 4M10F87OMXS 4M10F87OMXSS 500 350 8 5/16 M10 × 1.0 1/2-20 30 14 14 9 30 5M10F87OMXS 5M10F87OMXSS 420 350 8 5/16 M12 × 1.5 1/2-20 33 14 19 11 37 5M12F87OMXS 5M12F87OMXSS 420 350 8 5/16 M14 × 1.5 1/2-20 34 14 19 11 40 5M14F87OMXS 5M14F87OMXSS 420 350 10 3/8 M14 × 1.5 9/16-18 34 14 19 11 44 6M14F87OMXS 6M14F87OMXSS 420 350 10 3/8 M16 × 1.5 9/16-18 36 14 22 12 53 6M16F87OMXS 6M16F87OMXSS 420 350 10 3/8 M18 × 1.5 9/16-18 37 14 24 13 60 6M18F87OMXS 6M18F87OMXSS 350 350 12 1/2 M14 × 1.5 3/4-16 36 17 19 11 41 8M14F87OMXS 8M14F87OMXSS 420 350 12 1/2 M16 × 1.5 3/4-16 38 17 22 12 57 8M16F87OMXS 8M16F87OMXSS 420 350 12 1/2 M18 × 1.5 3/4-16 39 17 24 13 71 8M18F87OMXS 8M18F87OMXSS 350 350 14, 15,16 5/8 M14 × 1.5 7/8-14 41 19 24 11 73 10M14F87OMXS 10M14F87OMXSS 350 350 14, 15,16 5/8 M18 × 1.5 7/8-14 43 19 24 13 75 10M18F87OMXS 10M18F87OMXSS 350 350 14, 15,16 5/8 M22 × 1.5 7/8-14 44 19 27 13 98 10M22F87OMXS 10M22F87OMXSS 350 350 14, 15,16 5/8 M27 × 2.0 7/8-14 46 19 32 16 75 10M27F87OMXS 10M27F87OMXSS 350 350 18, 20 3/4 M22 × 1.5 1 1/16-12 48 22 27 13 104 12M22F87OMXS 12M22F87OMXSS 350 350 18, 20 3/4 M27 × 2.0 1 1/16-12 51 22 32 16 158 12M27F87OMXS 12M27F87OMXSS 350 350 25 1 M27 × 2.0 1 5/16-12 51 23 36 16 206 16M27F87OMXS 16M27F87OMXSS 280 280 25 1 M33 × 2.0 1 5/16-12 53 23 41 16 273 16M33F87OMXS 16M33F87OMXSS 280 280 28, 30, 32 1 1/4 M42 × 2.0 1 5/8-12 55 24 50 16 431 20M42F87OMXS 20M42F87OMXSS 280 210 35, 38 1 1/2 M48 × 2.0 1 7/8-12 59 28 55 18 564 24M48F87OMXS 24M48F87OMXSS 210 140Steel, stainless steel and brass Triple-Lok ® parts are delivered with NBR elastomeric seals as standard. For more details on other seal materials see page K93.Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar) = PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.F87OMX Male stud connectorTriple-Lok ® 37° Flare end / Male metric thread – O-ring (ISO 6149)KTube Thread Thread Weight PN (bar) O.D. UN/UNF-2A UN/UNF-2A C4 D D2 L5 LL (steel) Triple-Lok ® Triple-Lok ®mm in. T5 T mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 1/8 5/16-24 5/16-24 11 2 2 27 19 8 2 F5OX-S 500 — 3/16 3/8-24 3/8-24 13 3 3 28 20 10 3 F5OX-S 500 — 3/16 5/16-24 3/8-24 13 3 2 28 20 9 3-2 F5OX-S 500 — 6 1/4 7/16-20 7/16-20 14 4 4 31 22 15 4F5OMXS 4F5OMXSS 500 350 6 1/4 3/8-24 7/16-20 14 5 3 30 23 12 4-3 F5OX-S 4-3F5OMXSS 500 350 6 1/4 1/2-20 7/16-20 16 4 6 31 22 25 4-5 F5OX-S 4-5F5OMXSS 420 350 6 1/4 9/16-18 7/16-20 17 4 4 33 23 27 4-6F5OMXS 4-6F5OMXSS 420 350 6 1/4 3/4-16 7/16-20 22 4 10 35 24 35 4-8 F5OX-S 4-8F5OMXSS 420 350 6 1/4 7/8-14 7/16-20 25 5 5 38 25 60 4-10 F5OX-S 4-10F5OMXSS 350 350 8 5/16 1/2-20 1/2-20 16 6 6 31 22 18 5F5OMXS 5F5OMXSS 420 350 8 5/16 7/16-20 1/2-20 14 6 5 31 22 18 5-4 F5OX-S 5-4F5OMXSS 420 350 8 5/16 9/16-18 1/2-20 17 6 6 33 23 25 5-6 F5OX-S 5-6F5OMXSS 420 350 8 5/16 3/4-16 1/2-20 22 6 6 35 24 40 5-8 F5OX-S 5-8F5OMXSS 420 350 10 3/8 9/16-18 9/16-18 17 8 8 33 23 25 6F5OMXS 6F5OMXSS 420 350 10 3/8 7/16-20 9/16-18 16 8 4 32 23 40 6-4 F5OX-S 6-4F5OMXSS 420 350 10 3/8 1/2-20 9/16-18 16 8 6 32 23 56 6-5 F5OX-S 6-5F5OMXSS 420 350 10 3/8 3/4-16 9/16-18 22 8 8 35 24 44 6-8F5OMXS 6-8F5OMXSS 420 350 10 3/8 7/8-14 9/16-18 25 8 12 38 25 85 6-10 F5OX-S 6-10F5OMXSS 350 350 10 3/8 1 1/16-12 9/16-18 32 8 16 42 27 100 6-12 F5OX-S 6-12F5OMXSS 350 350 12 1/2 3/4-16 3/4-16 22 10 10 38 27 58 8F5OMXS 8F5OMXSS 420 350 12 1/2 7/16-20 3/4-16 21 10 5 38 29 40 8-4 F5OX-S 8-4F5OMXSS 420 350 12 1/2 9/16-18 3/4-16 19 10 10 37 27 44 8-6F5OMXS 8-6F5OMXSS 420 350 12 1/2 7/8-14 3/4-16 27 10 10 41 28 73 8-10F5OMXS 8-10F5OMXSS 350 350 12 1/2 1 1/16-12 3/4-16 32 10 10 45 30 126 8-12F5OMXS 8-12F5OMXSS 350 350 12 1/2 1 5/16-12 3/4-16 41 10 10 45 30 160 8-16 F5OX-S 8-16F5OMXSS 310 310 14, 15,16 5/8 7/8-14 7/8-14 27 12 12 43 31 75 10F5OMXS 10F5OMXSS 350 350 14, 15,16 5/8 9/16-18 7/8-14 18 13 8 43 34 60 10-6 F5OX-S 10-6F5OMXSS 350 350 14, 15,16 5/8 3/4-16 7/8-14 24 12 10 42 31 65 10-8F5OMXS 10-8F5OMXSS 350 350 14, 15,16 5/8 1 1/16-12 7/8-14 32 12 12 47 32 132 10-12F5OMXS 10-12F5OMXSS 350 350 14, 15,16 5/8 1 5/16-12 7/8-14 41 13 13 48 33 170 10-16 F5OX-S 10-16F5OMXSS 310 310 18, 20 3/4 1 1/16-12 1 1/16-12 32 16 16 50 35 134 12F5OMXS 12F5OMXSS 350 350 18, 20 3/4 3/4-16 1 1/16-12 29 16 10 49 38 104 12-8 F5OX-S 12-8F5OMXSS 350 350 18, 20 3/4 7/8-14 1 1/16-12 27 16 12 48 35 108 12-10F5OMXS 12-10F5OMXSS 350 350 18, 20 3/4 1 3/16-12 1 1/16-12 35 16 16 50 35 170 12-14 F5OX-S 12-14F5OMXSS 310 310 18, 20 3/4 1 5/16-12 1 1/16-12 38 16 16 51 35 197 12-16F5OMXS 12-16F5OMXSS 310 310 18, 20 3/4 1 5/8-12 1 1/16-12 48 16 16 53 38 230 12-20 F5OX-S 12-20F5OMXSS 280 280 22 7/8 1 3/16-12 1 3/16-12 35 18 18 51 36 174 14 F5OX-S 14F5OMXSS 280 280 22 7/8 1 5/16-12 1 3/16-12 38 18 22 51 36 223 14-16 F5OX-S 14-16F5OMXSS 280 280 25 1 1 5/16-12 1 5/16-12 38 22 22 52 37 203 16F5OMXS 16F5OMXSS 280 280 25 1 3/4-16 1 5/16-12 35 22 10 45 34 160 16-8 F5OX-S 16-8F5OMXSS 280 280Continued on page K30F5OMX Male stud connectorTriple-Lok ® 37° Flare end / Male UN/UNF thread – O-ring (ISO 11926)SAE 070120 MS51525。

Parker派克样本PVP Series Piston Pumps

Parker派克样本PVP Series Piston Pumps

Piston PumpsCatalog HY28-2662-CD/US Revised June, 2012Quick Reference Data ChartDisplacement Pump Delivery† Approx. Noise Levels dB(A)Input Power AtOperating PressurePumpcc/rev @ 21 bar (300 PSI)@ Full Flow 1800 RPM (1200 RPM)1800 RPM, Max.Speed (RPM)bar (PSI)Model(In3/rev)in LPM (GPM)34 bar69 bar138 bar207 bar248 bar Displacement &(Maximum)Continuous 1200 RPM1800 RPM(500 PSI)(1000 PSI)(2000 PSI)(3000 PSI)(3600 PSI)248 bar (3600 PSI)(Maximum)PVP1616(.98)19.7(5.2)29.5(7.8)53 (47)55 (50)59 (54)62 (56)65 (59)13.1 kw (17.5 hp)3000248 (3600) PVP2323(1.4)28.0(7.4)42.0(11.1)61 (57)64 (59)67 (63)69 (65)70 (65)19.7 kw (26.5 hp)3000248 (3600) PVP3333(2.0)39.4(10.4)59.0(15.6)64 (59)66 (59)68 (62)70 (64)71 (65)27.2 kw (36.5 hp)3000248 (3600) PVP4141(2.5)49.2(13.0)73.8(19.5)68 (60)70 (61)73 (65)74 (67)75 (69)33.2 kw (44.5 hp)2800248 (3600) PVP4848(2.9)57.6(15.2)86.4(22.8)69 (60)71 (62)73 (65)75 (68)76 (69)40.3 kw (54.0 hp)2400248 (3600)†Measured in an anechoic chamber to DIN 45635, measuring error + 2 dB(A).Fluid used: petroleum oil to ISO VG 46; temperature = 50°C (122°F).Since many variables such as mounting, tank style, plant layout, etc., effect noise levels, it cannot be assumed thatthe above readings will be equal to those in the field. The above values are for guidance in selecting the proper pump.Features•High Strength Cast-Iron Housing •Fast Response Times•Two Piece Housing For Ease of Service •Metric Pilot, Shaft and Ports Available •Replaceable Bronze Clad Port Plate •Thru-Shaft Capability •Low Noise Levels•Replaceable Piston Slipper PlateControls•Pressure Compensation •Load Sensing•Horsepower Limiting•Horsepower and Load Sensing •Remote Pressure Compensation •Adjustable Maximum Volume Stop •Hi/Lo Torque (Power) Limiting (PVP 41/48, 60/76, 100/140 Only)•Low Pressure StandbySERVO COMPENSA TORPUMP CASE BIAS PLA TE BARREL PLA TE BEARING SEALGeneral DescriptionAll control is achieved by the proper positioning of the swash plate. This is achieved by a servo piston acting on one end of the swash plate working against the combined effect of the off-setting forces of the pistons and centering spring on the other end. The control spool acts as a metering valve which varies the pressure behind the servo piston.As shown in Figure 1, the amount of flow produced by the Parker Piston Pump is dependent upon the length of stroke of the pumping pistons. This length of stroke, in turn, is determined by the position of the swash plate. Maximum flow is achieved at an angle of 15-17degrees. The rotating barrel, driven by the prime mover, moves the pistons in a circular path and the piston slippers are supported hydrostatically against the face of the swash plate. When the swash plate is in a vertical position, perpendicular to the centerline of the piston barrel, there is no piston stroke and consequently no fluid displacement. When the swash plate is positioned at an angle, the pistons are forced in and out of the barrel and fluid displacement takes place. The greater the angle of the swash plate, the greater the piston stroke.Control OptionsBARRELPressure Compensated Control (OMIT)The swash plate angle controls the output flow of the pump. Swash plate angle is generated by the hydraulic force of the pumping pistons and the mechanical force of the swash plate bias spring. Control of the pump’s outlet flow is obtained by over-riding the force of the pumping pistons and bias spring with the hydraulic force of the servo piston by means of internal porting. Pressure is connected from the outlet port to the servo piston via a compensator spool.The compensator spool is held against the spring guide by the outlet pressure. When the outlet pressure reaches the setting of the compensator control, the compensator spool moves, allowing outlet pressure oil to be metered into the servo piston. This metered oil provides adequate force to power the servo piston and override swash plate forces. The outlet pressure causes the servo piston to move which reduces the angle of the swash plate and thereby reduces the pump’s output flow. When flow is again demanded by the system, the outlet pressure will momentarily fall allowing the compensator spool to move. This movement closes off the outlet pressure to the servo piston and vents the servo piston to case. The result of this venting allows the swash plate forces to move the swash plate angle to maximum displacement, thus responding to the demand for additional flow. Note that the compensator spring chamber is vented to the pump case via a hole internal to the compensator spool.PORTRemote Pressure Control (M)The pump swash plate actuation is identical to the standard pressure compensator but can be controlled via a remote pressure control.Remote control of the pump output pressure can be achieved by controlling the pressure at port A, Figure 3 on the compensator. Flow is metered through the orifice in the spool from outlet pressure into the spring chamber. The spring chamber pressure is limited by an external relief connected to port A. The controlled pressure at port A is sensed at the differential spring chamber. The compensator spool will move to the right when the pump outlet pressure reaches a force equal to the differential spring setting plus the controlled port pressure setting. When the spool moves to the right, outlet pressure oil is metered to the servo piston and the pump swash plate angle is controlled accordingly. With this option the pump outlet pressure can be controlled and varied from a remote location.This control also incorporates a pressure limiting feature preset at the factory. When the pressure in the differential spring chamber reaches the maximum relief setting, the dart unseats allowing the spring chamber to vent to the pump case and limits the maximum pressure attainable.Control OptionsCatalog HY28-2662-CD/USFlow Control (Load Sensing) (A)Figure 4 shows a PVP pump with flow control. The control is identical to the remote pressure compensation control except for an integral orifice, a solid compensator spool and adjustable differential pressure control. Port A is connected downstream of an orifice (variable or fixed) to sense the actual working pressure required. This pressure plus the differential spring force act on the right side of the compensatorspool and will urge the spool to the left until output pressure acting on the left side of the spool balances the forces. As the load increases, output pressure will increase and maintain a constant differential pressure across the orifice and thus a constant flow.Maximum pressure is limited by the internal dart setting.This setting is adjustable up to the maximum preset at the factory.Variable Volume Piston PumpsSeries PVPControl OptionsPORTCatalog HY28-2662-CD/USPressure & Power Control (H)This control option is a T orque Limiting Control, but for constant speed applications it is generally referred to as a Horsepower Control. This control works in conjunction with the Remote Pressure Compensator,control option “M”. A second pressure control device called a horsepower control block, is assembled to the main pump housing. The HP block is plumbed to one of the ports on the remote compensator via steel tubing.The control dart in the HP block and the maximum pressure compensator dart in the remote compensator are connected in parallel. What makes the control dart in the HP block different from any other external relief valve is the pressure setting is mechanically linked to the pump swashplate angle.The cracking pressure of the HP dart is generally lower than the cracking pressure of the remote compensator differential spring cavity is lowered allowing the compensator spool to meter system pressure in the servo piston. As the servo piston extends, it rotates the swashplate and in turn rotates the HP cam. As the cam rotates it increases the force on the HP dart control spring. As the system pressure is allowed to increase,the pump gradually reduces its stroke (flow). When the system pressure reaches the setting of the maximum pressure dart the normal action of the remote compensator takes over. If the HP control is set low enough, the pump may reach zero stroke before the system pressure ever gets a chance to open the maximum compensator dart. This should be considered when making low power settings on systems requiring high working pressures.Variable Volume Piston Pumps Series PVPControl OptionsCatalog HY28-2662-CD/USPressure, Power & Flow Control (C)Refer to the previous section(s) on Flow Control and Power Control. This is another case where multiple controls can be combined in parallel. Since the Power Control is just a special version of Remote Pressure Control, it can be combined with the Flow Control (Load Sense) option. The main point to remember here is that the pressure drop which is required to begin and maintain compensation comes from an external device (such as a proportional valve). This sensed pressure drop will control flow until one of the limits of the other controls has been exceeded. The pump will always respond to the lowest control setting for any given pressure. In addition to Load Sensing, Power Control,and on-pump Pressure Control, Remote Pressure Control can also be included in this parallel device package. There is a remote port on the compensator body and one on the HP Control body, either of which may be used for remote pressure control. The important concept to remember in load sense circuits is that each pressure control device in and connected to the compensator must be protected from saturation. For this reason, use only the uppermost port on the compensator for connection of the load sense line and insure that an appropriate orifice is installed. All control options using a load sense compensator spool are supplied with this orifice.Variable Volume Piston Pumps Series PVPControl OptionsCatalog HY28-2662-CD/USHi/Lo Power Control (HLM)(Available with PVP41 and PVP48 Only)The graph shown below represents the flow-pressure characteristics of a Hi-Lo control for PVP pumps. There are up to four separate adjustments that must be made with the pump controls to get a particular setting, all of which influence the shape of the curve. To get the proper settings, it is very important that all pertinent information is supplied with each Hi-Lo pump ordered.As you can see from the graph below, there are two peak power points. Our intention is to have the same magnitude of power required for both peaks. Of course many combination of settings are possible but specification of the settings becomes very difficult. To make factory settings, we need to know the required flow (applicable if pump has a maximum volume stop), the shaft speed , the required Power limit , and the compensation pressure . Based on these requirements, we will adjust the low pressure set point and the reduced flow set point of the Hi-Lo control to best match the requested parameters called out on the order.Important note: As with power controls, not all combinations of flow, power, pressure, etc. are possible.pressure or in a de-stroked condition can have a much lower overall efficiency than expected. The other thing to keep in mind is that the pump will require the peak power at only two points. All other operating pressures will require less than maximum power and therefore the pump will deliver less hydraulic power in the appropriate ratio based on the actual pump efficiency at those conditions.System PressureO u t l e t F l o wTypical Hi-Lo ControlFlow/Pressure CharacteristicsVariable Volume Piston Pumps Series PVPControl OptionsPVP SERIESPRESSURE & POWER COMPENSATORCONTROL OPTION "HLM"Performance InformationSeries PVP16 Pressure Compensated,Variable Volume, Piston PumpFeatures•High Strength Cast-Iron Housing for Reliability and Quiet Operation•Optional Inlet/Outlet Locations for Ease of Installation•Replaceable Bronze Port Plate •Replaceable Piston Slipper Plate•Thru-Shaft Capability SAE A Pilots Offered •Low Noise Levels - Promote More Comfortable Operating Environment •Fast Response Times•Metric Pilot Shaft and Ports AvailableControls•Pressure Compensation•Remote Pressure Compensation •Load Sensing•Torque (Power) Limiting•Adjustable Maximum Volume Stop •Low Pressure StandbySchematic Symbol(Basic Pump)Quick Reference Data ChartDisplacementPump Delivery † Approx. Noise Levels dB(A)Input Power At Pump cc/rev @ 21 bar (300 PSI)@ Full Flow 1800 RPM (1200 RPM)1800 RPM, Max.Model (In 3/rev)in LPM (GPM)34 bar 69 bar 138 bar 207 bar 248 bar Displacement &1200 RPM 1800 RPM (500 PSI)(1000 PSI)(2000 PSI)(3000 PSI)(3600 PSI)248 bar (3600 PSI)PVP1616.4 (1.0)19.7 (5.2)29.5 (7.8)53 (47)55 (50)59 (54)62 (56)65 (59)13.1 kw (17.5 hp)†Measured in an anechoic chamber to DIN 45635, measuring error + 2 dB(A).Fluid used: petroleum oil to ISO VG 46; temperature = 50°C (122°F).Since many variables such as mounting, tank style, plant layout, etc., effect noise levels, it cannot be assumed that the above readings will be equal to those in the field. The above values are for guidance in selecting the proper pump.SpecificationsPressure Ratings Outlet Port:248 bar (3600 PSI) Continuous (P1)310 bar (4500 PSI) Peak (P3)Inlet Port:1.72 bar (25 PSI) Maximum.17 bar (5 In. Hg.) Vacuum Minimum @ 1800 RPM (See inlet chart for other speeds)Speed Ratings:600 to 3000 RPMOperating Temperature Range:– 40°C to 71°C(– 40°F to 160°F)Housing Material:Cast-Iron Filtration:Maintain SAE Class 4,Mounting:SAE “A” or Metric 2-Bolt Flange MountInstallation Data:See page 42 of this catalog for specific recommendations pertaining to system cleanliness, fluids, start-up, inlet conditions, shaft alignment, drain line restrictions and other important factors relative to the proper installation and use of these pumps.*Available with CW rotation only.NOTE: The efficiencies and data in the graph are nominal values and good only for pumps running at 1800 RPM and stroked to maximum. To calculate approximate horsepower for the other conditions, use the following formula:Actual GPM is directly proportional to drive speed and maximum volume setting. Flow loss, however, is a function of pressure only.HP = Q x (PSI) + (CHp)1714[ ]WHERE:Q =Actual Output Flow in GPM PSI =Pressure At Pump OutletCHp =Input Horsepower @ Full Compensation @ 1800RPM(from graph read at operating pressure)45678910100908070F l o wE f f i c i e n c y - %P o w e rPVP16 @ 1200 RPM021315.118.922.726.530.334.137.907.63.811.400Bar PSI 691000138200020730002754000Pressure LPM 03.06.08.911.914.904.08.012.016.020.0HP KW 4567891010090807060F l o wE f f i c i e n c y - %P o w e rPVP16 @ 1800 RPM021315.118.922.726.530.334.137.907.63.811.400Bar PSI 691000138200020730002754000PressureLPM 03.06.08.911.914.904.08.012.016.020.0HP KW12.015.0O u t l e t F l o w @ M a x . D i s p l a c e m e n tFlow vs. Speed010002000300050015002500Shaft Speed - RPM6.03.09.045.557.8022.711.434.1GPM LPM PVP16Inlet Characteristics at Full Displacement(Graph only valid at sea level)10001500500200025003000Shaft Speed - RPMV a c u u mI n l e t P r e s s u r e 6.414.282.14PSI bar 005.1710.3415.5120.68barPower ControlFull Flo w TorquePSI 1000200030004000PressureF l o wT o r q u e012.424.837.049.561.9011022033044055074.3660In-LbsN·mFull Flo w TorquePSI 1000200030004000PressureF l o wT o r q u e09.018.027.036.045.008016024032040054.048063.056072.0640In-LbsN·m T i m e (m i l l i s e c )PVP16 @ 1200 RPM00Bar PSI 691000138200020730002754000Pressure 100125150200T i m e (m i l l i s e c )PVP16 @ 1800 RPM50257500Bar PSI 691000138200020730002754000PressurePVP16Compensated Power@ 1800 RPM00Bar PSI 691000138200020730002754000Pressure2.02.53.0P o w e r01.0.51.51.51.92.20.75.371.1HPKW PVP16Approximate Case Drain Flow@ 1800 RPM 00Bar PSI 691000138200020730002754000Pressure .4.5.6F l o w0.2.1.31.51.92.30.8.41.1GPMLPM Response TimesRear Ported Pump Dimensions* Inch equivalents for millimeter dimensions are shown in (**).NOTE:Illustration shows Righthand (CW) rotation pump. Lefthand (CCW)pumps will have inlet and outlet ports reversed with compensator on outlet side.STRAIGHT THREAD O-RING PORT (9/16-18 UNF-2B)(INCLUDED IN “5” OPTION ONL Y)ADJ. MAX. VOLUME STOP (1.6 CC/REV/TURN)“OPTION 2”Front ViewPilot DimensionsPilot A C D Option OMIT N/A 32.00173.23(1.26)(6.82)538.1028.44144.53(1.50)(1.12)(6.44)FLAADJ. MAX.VOLUME STOP(1.6 CC/REV/TURN)“OPTION 2”Rear View Front ViewSide Ported – Options 2 & 4 Dimensions* Inch equivalents for millimeter dimensions are shown in (**).NOTE:Illustration shows Righthand (CW) rotation pump. Lefthand (CCW) pumps will have inlet and outlet ports reversed with compensator on outlet side.Port Size Type and LocationOption A Inlet and Outlet Ports Drain Port 148.843/4" SAE 4-Bolt FlangeSAE-6 Straight Thread 2(5.86)3/8-16 Thread(9/16-18UNC)Std PSI Series (Code 61)4152.40SAE-16 Straight Thread SAE-6 Straight Thread(6.00)(1-5/16-12UN-2B)(9/16-18UNC)Dimensional DataPilot DimensionsShaft A B C D Option Omit 82.55/82.50 6.1053.09ø 3/8"B, C ø (3.250/3.248)(.24)(2.09)K80.00/79.957.2455.63ø 10mmø(3.149/3.147)(.285)(2.19)Side Ported – Options 8 & 9 Dimensions* Inch equivalents for millimeter dimensions are shown in (**).NOTE:Illustration shows Righthand (CW) rotation pump.ADJ. MAX.VOLUME STOP (1.6 CC/REV/TURN)“OPTION 2”Side ViewThru-Shaft Pump Dimensions* Inch equivalents for millimeter dimensions are shown in (**).NOTES:1.Righthand (CW) rotation pump shown above.Counterclockwise (CCW) pump will have inlet and outlet ports reversed with the compensator over the outlet port.2.Splined shaft (option “B”) not recommended withThru-Shaft pumps.3.The maximum torque transmitting capacity for rearmounting of pumps is limited by the allowable torque of the input shaft.4.Options 6A4 and 9A4 Design Series 12 have a gasket.All other options incorporate an o-ring seal and have an o-ring groove.Port Size Type and LocationOption A Inlet and Outlet Ports Drain Port 148.843/4" SAE 4-Bolt FlangeSAE-6 Straight Thread2(5.86)3/8-16 Thread(9/16-18UNC)Std PSI Series (Code 61)4152.40SAE-16 Straight Thread SAE-6 Straight Thread(6.00)(1-5/16-12UN-2B)(9/16-18UNC)148.843/4" SAE 4-Bolt FlangeISO 6149-68(5.86)M10 ThreadM16 x 1.50Std PSI Series (Code 61)148.843/4" SAE 4-Bolt Flange9(5.86)M10 Thread3/8" - BSPPStd PSI Series (Code 61)Dimensions – Thru Shaft OptionsVARIATIONH GFE DC 6A453.19 (2.09)82.58/82.60 (3.251/3.252)N/A 3/8–16UNC–2B 9 T ooth 16/32 Pitch207.26 (8.16)9A453.19 (2.09)82.58/82.60 (3.251/3.252)N/AM10 x 1.509 T ooth 16/32 Pitch207.26 (8.16)Remote Compensator Control Pump Dimensions* Inch equivalents for millimeter dimensions are shown in (**).NOTES:1.Righthand (CW) rotation pump shown below. Lefthand (CCW) pumps will have compensator on opposite side.2.When controlling pump compensator pressure with remote relief valve, remote relief valve must be capable of passing 1.89 LPM (.5 GPM).3.Remote compensator option “M”, “ME” & “A” available on pumps with any port location.PUMPSISO 6149-4“9” OPTION1/4"TEDC L Side View Front ViewDimensional DataDimensional DataPower (Torque) Control Pump Dimensions* Inch equivalents for millimeter dimensions are shown in (**).NOTES:1.Righthand (CW) rotation rear ported pump shown. Counterclockwise (CCW)pumps will have inlet and outlet ports reversed with compensator and powerblock on outlet side.2.Power control shown on rear ported pump. Also available on side ported or thru-shaft option pumps.Side View Front ViewPerformance InformationSeries PVP 23/33 Pressure Compensated, Variable Volume, Piston PumpsFeatures•High Strength Cast-Iron Housing for Reliability and Quiet Operation•Optional Inlet/Outlet Locations for Ease of Installation•Replaceable Bronze Port Plate •Replaceable Piston Slipper Plate•Thru-Shaft Capability SAE A andB Pilots Offered•Low Noise Levels•Fast Response Times•Metric Pilot Shaft and Ports AvailableControls•Pressure Compensation •Remote Pressure Compensation •Load Sensing•Torque (Power) Limiting •Adjustable Maximum Volume Stop •Low Pressure StandbySchematic Symbol(Basic Pump)SpecificationsPressure RatingsOutlet Port:248 bar (3600 PSI) Continuous (P1)310 bar (4500 PSI) Peak (P3)Inlet Port: 1.72 bar (25 PSI) Maximum.17 bar (5 In. Hg.) Vacuum Minimum@ 1800 RPM (See inlet chart forother speeds)Speed Ratings:600 to 3000 RPMOperating T emperature Range:–40°C to 71°C(–40°F to 160°F) Housing Material: Cast-IronFiltration:Maintain SAE Class 4,ISO 16/13,ISO 18/15 MaximumMounting:SAE “B” or Metric 2-BoltFlange MountInstallation Data:See page 42 of this catalog for specific recommendations pertaining to system cleanliness, fluids, start-up, inlet conditions, shaft alignment, drain line restrictions and other important factors relative to the proper installation and use ofthese pumps. Quick Reference Data ChartDisplacement Pump Delivery† Approx. Noise Levels dB(A)Input Power AtPumpcc/rev @ 21 bar (300 PSI)@ Full Flow 1800 RPM (1200 RPM)1800 RPM, Max.Model(In3/rev)in LPM (GPM)34 bar69 bar138 bar207 bar248 bar Displacement & 1200 RPM1800 RPM(500 PSI)(1000 PSI)(2000 PSI)(3000 PSI)(3600 PSI)248 bar (3600 PSI)PVP2323.0 (1.4)28.0 (7.4)42.0 (11.1)61 (57)64 (59)67 (63)69 (65)70 (65)19.7 kw (26.5 hp) PVP3333.0 (2.0)39.4 (10.4)59.0 (15.6)64 (59)66 (59)68 (62)70 (64)71 (65)27.2 kw (36.5 hp)†Measured in an anechoic chamber to DIN 45635, measuring error + 2 dB(A).Fluid used: petroleum oil to ISO VG 46; temperature = 50°C (122°F).Since many variables such as mounting, tank style, plant layout, etc., effect noise levels, it cannot be assumed thatthe above readings will be equal to those in the field. The above values are for guidance in selecting the proper pump.81012141618201009080706050F l o wE f f i c i e n c y - %P o w e rPVP23 @ 1800 RPM042630.337.945.453.060.668.275.7015.17.622.700Bar PSI 691000138200020730002754000PressureLPM 03.06.08.911.914.904.08.012.016.020.017.920.923.924.028.032.0HP KW HP = Q x (PSI) + (CHp)[ ]NOTE: The efficiencies and data in the graph are good only for pumps running at 1800 RPM and stroked to maximum. To calculate approximate horsepower for the other conditions,use the following formula:Actual GPM is directly proportional to drive speed and maximum volume setting. Flow loss, however, is a function of pressure only.WHERE:Q =Actual Output Flow in GPM PSI =Pressure At Pump OutletCHp =Input Horsepower @ Full Compensation @ 1800RPM (from graph read at operating pressure)81012141618201009080706050F l o wE f f i c i e n c y - %P o w e rPVP33 @ 1800 RPM042630.337.945.453.060.668.275.7015.17.622.700Bar PSI 691000138200020730002754000PressureLPM 06.011.917.923.929.808.016.024.032.040.0HP KWFlow vs. Speed10002000300050015002500Shaft Speed - RPM16.028.0Ou t l e t F l o w @ M a x . D i s p l a c e m e n t08.04.012.060.6106.0030.315.245.524.020.090.875.7GPM LPM PVP 23/33Inlet Characteristics at Full Displacement(Graph only valid at sea level)10001500500200025003000Shaft Speed - RPMV a c u u mI n l e t P r e s s u r e 6.414.282.14PSI bar 005.1710.3415.5120.68barPVP23 @ 1800 RPM00Bar PSI 691000138200020730002754000Pressure81012F l o wT o r q u e42630.337.945.4015.17.622.7019.739.459.178.898.40175350525700875118.11050GPM LPM In-Lbs N·m Power ControlPVP33 @ 1800 RPM00Bar PSI 691000138200020730002754000Pressure81016F l o wT o r q u e42630.337.960.61453.01245.415.17.622.7019.739.459.178.898.40175350525700875157.51400137.81225118.11050GPM LPM In-Lbs N·mResponse Times80100120T i m e (m i l l i s e c )PVP 23/33 @ 1200 RPM40206000Bar PSI 691000138200020730002754000Pressure 80100120T i m e (m i l l i s e c )PVP 23/33 @ 1800 RPM40206000Bar PSI 691000138200020730002754000PressurePVP 23/33Approximate Case Drain Flow@ 1800 RPM00Bar PSI 691000138200020730002754000.4.5.6F l o w.2.1.31.51.92.3.7.82.73.00.8.41.1.93.4GPMLPM PVP 23/33Compensated Power@ 1800 RPM00Bar PSI 6910001382000207300027540002.02.53.0P o w e r01.0.51.51.51.92.20.75.371.13.54.02.63.0HP KWRear Ported Pump Dimensions* Inch equivalents for millimeter dimensions are shown in (**).NOTES:1.Righthand (CW) rotation pump shown. Lefthand (CCW) pumps have inlet and outlet ports reversed.2.Pump shown with standard pressure compensator (control option “omit”)..)Side Ported – Options 2 & 3 Dimensions* Inch equivalents for millimeter dimensions are shown in (**).NOTES:1.Righthand (CW) rotation pump shown. Lefthand (CCW) pumps have inletand outlet ports reversed.2.Pump shown with standard pressure compensator (control option “omit”).Port LocationOption A Inlet and Outlet Port148.841-1/4" SAE 4-Bolt Flange 2(3.10)7/16-14 Threads StandardPressure Series (Code 61) 3152.40SAE-20 Straight Thread(3.22)(1-5/8-12UN-2B)Side Ported – Options 8 & 9 Dimensions* Inch equivalents for millimeter dimensions are shown in (**).NOTES:1.Righthand (CW) rotation pump shown.2.Pump shown with standard pressure compensator (control option “omit”).Pilot DimensionsShaft A B C D Option Omit 101.60/101.559.4072.90ø 12.70B, C, D (4.000/3.998)(.37)(2.87)(.50)K100.00/99.959.1469.85ø 12mm(3.937/3.935)(.36)(2.75)Top View Side View Rear ViewThru-Shaft Pump Dimensions* Inch equivalents for millimeter dimensions are shown in (**).NOTES:1.Righthand (CW) rotation side ported pump shown.Lefthand (CCW) pump will have inlet and outletports reversed.2.Install coupler on shaft of rear pump to dimensionshown then lock down coupler using set screws.3.Options, 6A2, 6A4, 9A4 and 9A5 Design Series 20have a gasket seal, all other thru-shaft optionsincorporate an o-ring seal and have ano-ring groove.4.Maximum torque transmitting capacity 209 N•m(1850 in-lbs).Thru-Shaft OptionsGFEDCBAno i t a i r aV6A4238.51 (9.39)82.58/82.60 (3.251/3.252)53.19 (2.09)3/8-16UNC-2B9 Tooth 16/32 Pitch31.75 (1.25)N/A 6A5238.51 (9.39)82.58/82.60 (3.251/3.252)53.19 (2.09)3/8-16UNC-2B11 Tooth 16/32 Pitch31.75 (1.25)N/A 6B3252.48 (9.94)101.63/101.65 (4.001/4.002)73.03 (2.88)1/2-13UNC-2B13 Tooth 16/32 Pitch41.15 (1.62)N/A 6B4252.48 (9.94)101.63/101.65 (4.001/4.002)73.03 (2.88)1/2-13UNC-2B15 Tooth 16/32 Pitch45.97 (1.81)N/A 9A4238.51 (9.39)82.58/82.60 (3.251/3.252)53.19 (2.09)M10 x 1.509 Tooth 16/32 Pitch31.75 (1.25)N/A 9A5238.51 (9.39)82.58/82.60 (3.251/3.252)53.19 (2.09)M10 x 1.5011 Tooth 16/32 Pitch31.75 (1.25)N/A 9B3252.48 (9.94)101.63/101.65 (4.001/4.00)73.03 (2.88)M12 x 1.7513 Tooth 16/32 Pitch41.15 (1.62)N/A 9B4252.48 (9.94)101.63/101.65 (4.001/4.00)73.03 (2.88)M12 x 1.7515 Tooth 16/32 Pitch45.97 (1.81)N/A。

Parker 快速接头

Parker 快速接头

Quick Coupling Products Catalogue 3800-DS/UK March 2004For your safety!Under certain circumstances, quick couplings can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks.Only by using genuine Parker Components and following Parker assembly instructions can you be assured of the reliability and safety of the product and their conformity to the applicable standards.Failure to f ollow this rule can adversely af f ect the f unctional saf ety and reliability of products, cause personal injury, property damage, and result in loss of your guarantee rights.Subject to alteration.For your safety: see safety guide (pages 62-63).All dimensions used in this catalogue are in mm otherwise the units are specified. The rated pressure is in Mpa.If necessary you can also use the conversion table on page 64.The products described herein, including without limitation, products f eatures, dimensions, specifications and designs are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.For the product availability of Parker components, please refer to price list 3893.© Copyright 2004, Parker Hannifin Corporation. All Right Reserved.Catalogue 3800-DS/UK1Parker HannifinFluid Connectors GroupCatalogue 3800-DS/UK2Parker HannifinFluid Connectors GroupHow to select a hydraulic quick coupling?3Parker HannifinFluid Connectors GroupCatalogue 3800-DS/UK*Data shown here are indicative for quick selection purposes only. Please check technical data indicated for each individual series.How to select a hydraulic quick coupling?Catalogue 3800-DS/UK4Parker HannifinFluid Connectors GroupIndustrial and chemical60 SeriesNoA poppet with crimped seal assures a maximum sealing at low flow rates and prevents seal washout at high flow ratesConnection and discon-nection are possible by pulling the sleevesteel versions back-up ring5Parker HannifinFluid Connectors GroupCatalogue 3800-DS/UKIndustrial and chemical 60 SeriesLow cycle, non-pulsating pressure rating:Applications with lower cycle time and no severe cyclic pressure fluctuations, essentially steady pressure during an operating cycle. Typical applications include hydraulic jacks,mine roof support systems, and high pressure fluid transfer (pumping water or slurry in oil wells). Minor pump ripple is considered non-pulsating. Impulse tested at rated pressure.ANSI/ISO Pressure rating:Dynamic applications with normal to moderate hydraulic shocks such as general industrial equipment, hydraulic presses, agricultural equipment. Impulse tested at a multiple (125 % or 133 %) of rated pressure.A uniform cycle rate of 0.5 to 1.0 Hz is held over 100,000cycles according to ISO 7241-1 & 2.15%5%5%5%10%(50±5)%10 bar (1000 kPa)0 bar (0 kPa)± 5% test pressure15% test pressure5%Vacuum data: 696 mm Hg both connected and disconnected* Values shown for stainless steel are valid for both AISI 303 and AISI 316.Temperature rating:1 periodTest pressureCatalogue 3800-DS/UK6Parker HannifinFluid Connectors GroupIndustrial and chemical7Parker HannifinFluid Connectors GroupCatalogue 3800-DS/UKIndustrial and chemical60 SeriesSTEEL COUPLERSNote : Quick couplings with UNF thread are also available upon request. Please consult us for these configurations.Catalogue 3800-DS/UK8Parker HannifinFluid Connectors GroupIndustrial and chemical 60 SeriesAISI 316 STAINLESS STEEL COUPLERS* Suffix "Y" designates FKM (Viton™) seal.Note : Quick couplings with UNF thread are also available upon request. Please consult us for these configurations.Heavy duty nipples:Parker 60 series heavy duty nipples are recommended for extended life in applications where high cycle rates and pressure surges are encountered. Machined from high tensile steel and specially hardened. To specify a heavy duty nipple, add the prefix HD to the steel series part number, thus: HDH2-63 and contact us.Sleeve-lock:60 series couplers (as well as sleeve type couplers) are available with safety locking sleeves. Please add the suffix SL to the part number, e.g. H3-62SL and contact us.Seals:Other seal materials (Ethylene Propylene – EPDM, Neoprene – CR, Perfluoelastomer – Kalrez™) are available upon request.Please contact us for further information.Stainless steel AISI 316 dust plugs and caps are available upon request.Please consult us.*Brass 60 series couplers use two O-rings but do not use a back-up ring.NoBall locking mechanismsafety sleeve lock prevents accidental disconnection. Sleeve is rotated to the stop to engage the Seal : NBR (Nitrile)Zinc plated steel l l o w chromate finishValving: flush-faced poppet for reduced spillage during disconnection. The seal is crimped to prevent seal washout at high flow ratesNoTechnical featuressafety sleeve lock prevents accidental disconnection. SleeveBall locking mechanismSeal : NBR (Nitrile)Valving: flush faced poppetfor reduced spillage duringdisconnection. The seal iscrimped to prevent sealwashout at high flow ratesZinc plated steel with a yellow chromate finishFemale BSPP thread – DIN 385224° cone – DIN 2353*Light seriesACatalogue 3800-DS/UKHigh pressure CM SeriesTechnical featuresNoCatalogue 3800-DS/UK High pressureCM SeriesCatalogue 3800-DS/UKHigh pressure CL Seriesrams, clamping devices, torque wrenches, cable cutters…Technical featuresNoCatalogue 3800-DS/UK High pressureCL SeriesCatalogue 3800-DS/UK■Clamping hand tools■Rescue equipmentTechnical featuresIt is possible to connect a male tip with a ball valving and a female body with a poppet valving, and vice-versa.High pressure 3000 SeriesNoCatalogue 3800-DS/UK High pressure3000 SeriesCatalogue 3800-DS/UKMobileIA SeriesNoApplications■Used for a wide range of agricultural applications: tractors,accessories…■Mobile and construction equipment■In-plant machinery: hydroelectric power stations, hand toolsMain characteristics■Meets the requirements of ISO 7241-1-Series A ■Reference couplings on the agricultural marketTechnical featuresCatalogue 3800-DS/UK MobileIA SeriesCatalogue 3800-DS/UKMobileIA SeriesThe 1/2" female coupling is available with a double acting sleeve (Push-Pull).Use part number 4250-29PF.The IA-502-8FB male tip should be used with this female coupling.Replacement sealsDust caps and plugsNote : Standard dust caps and plugs are black. Please consult us for other colours.Catalogue 3800-DS/UK Mobile2000 SeriesNoSingle acting sleeve for the group 2, double acting sleeveBall lockingmechanism Ball or poppet valving. A poppetwith crimped seal assures amaximum sealing and preventseal washout at high flow ratesZinc plated steely e l l o w chromate finish*To be used with Group 4 male tips.GROUP 2Female thread – DIN 3852 - Form X24° cone - DIN 235324° cone - DIN 2353 - BulkheadNote : Select "V" or “O” as second digit in part number for valving type identification.V: poppet type e.g. 2V54G4X4O: ball type e.g. 2O54G4X4 and check availability page 30.24° cone - DIN 2353 - Bulkhead* Light seriesJIC 37° – SAE J514JIC 37° - SAE J514 - Bulkhead24° cone - DIN 2353* Light series.** Heavy series.Note : Select "V" or “O” as second digit in part number for valving type identification. V: poppet type e.g. 4V54G4X4O: ball type e.g. 4O54G4X4 and check availability page 30.Permanent protective cap for female bodyRubberHigh strength rubber: resistant to deformation, exposure to elements, UV.Two combined functions:- Protection- Oil spillage collection.The modular concept accommodates multiple coupler configurations. Please consult us.Note :protective caps of the 9400 series (page 40) are also suitable for the 2000 series (body size 1/2").Automatic dust cap for female body PlasticNote : Standard dust cap is black. Please consult us for other colours.Y esin the maletipup to25 MpaValving: three-part poppet withmoulded shaped sealBody seal:back-up ring of filled PTFE towithstand flow surges at highflow ratesto prevent circuitshut off in back-flow condition (150 l./min. with190 l./min. max from the male tip to the femaleBall locking mechanism9400 SeriesJIC 37° - SAE J514 - BulkheadDin 2353 15L - Bulkhead9400 Series4000 SeriesNoball or poppet (as per chart on page 42). The seal is crimped to prevent seal washout at high flow ratesSeal NBR (Nitrile)Ball locking mechanismMain characteristics■The 1/2" body size meets the requirements of ISO 7241-1Series A■Famous coupling widely held on the market■Used for a wide range of forestry and agricultural equipment:tractors, agricultural machinery…■Construction and mobile equipment ■In-plant machineryApplicationsTechnical featuresZinc plated steel w4000 Series4000 SeriesRubberRubber with PlasticSteelsteel chain*Designates all-rubber dust caps and plugs**Colour code – By ordering, add after the part number the letter corresponding to the colour you wish:B = blue G = green R = redO = orangeY = yellowExample: yellow dust cap = 5019-4PYQHPA SeriesY esup to 5 Mpachromate finishThree-part poppet stylevalvingshaped seal to prevent sealwashout at high flow ratesThe sleevemale tip to protect the sealingareaQHPA SeriesQHPA SeriesQHPA SeriesMale thread - DIN 3852 - Form AFemale BSPP thread60° conefor BSPP thread60° cone for BSPP threadPolyethyleneDust caps and plugsMACH 2YesPoppet style valving with a mouldedshaped seal.The seal is crimped toprevent seal washout at high flow ratesCentral came locking system Seal : NBR。

Parker Hannifin Corporation 快速连接系列产品说明书

Parker Hannifin Corporation 快速连接系列产品说明书

A-21Parker Hannifin Corporation Quick Coupling Division Minneapolis, MN/quickcouplingsA P n e u m a t i c sCouplers- Push-Lok Hose Barb*Part No. Brass Part No. SteelHose I.D.B10-3BP –1/4B10-5BP–3/8* Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps.Pneumatic Quick Couplings General Purpose10 Series Couplers Tru-Flate DesignManual sleeve, single shut offCouplers- Standard Hose BarbBody Size Part No. BrassPart No. SteelHose I.D.1/4B10-3B –1/41/4B10-4B –5/161/4B10-5B –3/8Add suffix “N” to brass coupler part number for stainless steel springs and locking balls (ie B15N).Add suffix “-SL” for Sleeve-Lok option.Add suffix “R” for grip-ring sleeve (1/4” size only).A-22Parker Hannifin Corporation Quick Coupling Division Minneapolis, MN/quickcouplingsA P n e u m a t i csPerformance50 Series Pneumatic Couplers are interchangeable with ARO’s 210 series. Couplers have brass bodies. Nipples are constructed of steel. Sleeve-Lok is an optional feature.Features:• Integral sleeve guard resists accidental disconnection • Tubular valve delivers high air flow with minimal pressure drop• Stainless steel springs and locking balls option is available for added corrosion resistance • Standard seal is NitrileApplications include:• Air compressors • Pneumatic tools • Water • Grease • Paint50 Series (1/4" size)51015202530355101520A i r F l o w i n S C F M1/4"Pressure Drop in PSID 100 PSI Inlet Pressure 80 PSI Inlet PressurePneumatic Quick CouplingsGeneral Purpose50 Series Couplers ARO 210 InterchangeManual sleeve, single shut offContact QCD for availability and additional options.To select proper seal materials, see Fluid Compatibility Chart or contact QCD.Code Description Part Number Examplesuffix N Stainless steel springs, locking balls & brass valves (Couplers)B52N suffix -SL Sleeve-Lok (Couplers)B52-SL suffix W Ethylene Propylene seal material (-65º to + 400º F) (Couplers)B52W suffix Y Fluorocarbon seal material (-30º to + 400º F) (Couplers)B52YOptional Materials and Features:(add code to part number)A-23Parker Hannifin Corporation Quick Coupling Division Minneapolis, MN/quickcouplingsA P n e u m a t i c sNipples- Push-Lok Hose Barb*Body Size Part No. Steel Hose I.D.1/4A8CP1/4Nipples- Standard Hose BarbBody Size Part No. Steel Hose I.D.1/4A8C1/4Nipples- Female Pipe ThreadBody Size Part No. Steel 1/4A3CPneumatic Quick Couplings General Purpose50 Series Couplers ARO 210 InterchangeManual sleeve, single shut offBody Size Part No. Steel 1/4A2C* Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps.**This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 50 Series coupler。

Parker 美制JIC接头样本

Parker 美制JIC接头样本

7 Fitting material
Code
S SS B
Description
Steel Stainless Steel Brass
K4
Catalogue 4100-8/UK
BTX Nut
Triple-Lok® 37° Flare end nut SAE 070110 MS51531
Triple-Lok®
Triple-Lok ®
The universal 37° flared fitting
Triple-Lok®
Visual index
Tube to tube
Bulkhead union
HMTX p. K9
EMTX p. K10
JMTX p. K11
KTX p. K14
Tube to male NPTF
12 BTX-SS
12 BTX-B
22
7/8
1 3/16-12
1 3/8
24
28
100
14 BTX-S
14 BTX-SS
14 BTX-B
25
1
1 5/16-12
1 1/2
28
29
104
16 BTX-S
16 BTX-SS
16 BTX-B
28, 30, 32 1 1/4
1 5/8-12
2
34
31
240
20 BTX-S
Seals Retaining ring and Tooling
BMTX p. K6
BTX p. K5
TX p. K7
TRMTX p. K25
XHMLO p. K89
XHML6 p. K90
相关主题
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
相关文档
最新文档