错误代码信息

Ruu刷机错误信息列表...出错了可以对着查.

RUU刷机错误信息列表!出错了就对着错误信息自己好哈!

-> ERROR [202, 204] : CONNECTION 连接

This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync bef ore running RUU.

本错误码出现在设备与同步软件没有正常连接时。请检查你的设备通过同步软件已经与PC连通，而后再运行RUU刷机程序。

-> ERROR [206] : MEMORY ALLOCATION内存分配

-> ERROR [280] : UPDATE ERROR更新错误

When you see any of these error messages, close other running programs on the computer and run RUU again.

当你看到这些错误码时，请关闭计算机运行的其他无关程序，并重新运行RUU刷机程序。

-> ERROR [208] : FILE OPEN文件打开

-> ERROR [210] : FILE READ文件读取

These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.

本错误码指示RUU刷机程序发现缺少其所需要的重要文件，不能继续升级过程。请下载完整的RUU刷机程序包。

-> ERROR [212] : FILE CREATE文件创建

-> ERROR [214] : FILE WRITE文件写入

-> ERROR [222, 224] : DEVICE NOT RESPONDING设备无回应

These error messages will appear when remote access control has failed. Check the ActiveSync connection and try running RUU again.

本错误码出现在远程访问控制失败时。请检查同步软件的连接设置，并重新运行RUU刷机程序。

-> ERROR [220] : MAIN BATTERY POWER主电池电量

This error message will appear when the device’s battery power is not sufficient. Although RUU will instruct you to plug in t he AC adapter, it still has to make sure th at your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).

当设备电池供电能力低下时会产生本错误码。刷机程序要确认所升级设备拥有充足电力完成RADIO升级。（及时此时你使用AC电源供电，在升级RADIO时，它也无法给电池充电）

-> ERROR [238] : FILE READ文件读取

This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.

在发生未知原因的错误时，会产生本错误码，在设备中的ROM映象文件可能已经损坏。下载完整RUU刷机程序并重新尝试升级。

-> ERROR [240] : FILE OPEN文件打开

When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM imag e is not located in the RUU folder, you have to download the RUU and retry again.

当见到本错误码时，请检查下载的ROM镜像文件是否和RUU刷机程序存放在同一个目录。要保证他们在相同目录下。（最好避免路径名存在中文，毕竟程序是在英文环境下调试的。译者注。）

-> ERROR [242] : INVALID LANGUAGE无效语言

-> ERROR [244] : INVALID MODEL ID型号错误

-> ERROR [294] : INVALID VENDER ID无效提供商仅用于升级

One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.

本错误码出现在使用错误的RUU进行升级时。RUU刷机程序将对设备进行一系列兼容性检测。请确保你使用正确的RUU工具进行升级。

-> ERROR [246] : DEVICE NOT RESPONDING设备无回应

This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.

当RUU刷机程序不能开始升级进程时会产生本错误码。请与您的服务商联系协助解决。

-> ERROR [248~260] : UPDATE ERROR更新错误错误

This error occurs when there is an “open port error” before upgrading the CE ROM image.

S olution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer a nd try again.

在升级CE ROM映象时产生“OPEN PORT ERROR” （“打开端口错误”）会出现本错误码。

解决方法：您可以RESET以下设备并重新运行RUU刷机程序。如果依然遇到“OPEN PORT ERROR”错误，请重新启动计算机并重试。

＝＝＝＝＝＝＝＝＝＝＝很多朋友都遇到260错误，重新启动一次计算机，重新连接USB电缆通常能够解决＝＝＝＝＝＝＝＝＝＝＝＝＝

-> ERROR [262] : UPDATE ERROR更新错误错误

This error occurs during the CE ROM code upgrade process.

Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.

Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.

在升级CE ROM代码时会产生本错误码。

解决方法：如果发生了，只要软重置（soft-reset ）一下设备，并重新运行RUU刷机程序即可。升级进程将继续。

注意：在本阶段，WINCE已经被破坏，系统是处于升级模式下。