手持终端操作说明书
手持机操作说明书
手持机操作说明书一、手持机总览二、显示屏说明三、按键说明1、开关键：短按开机，长按3S关机2、菜单键：进入菜单操作模式，有四个菜单选项.3、组合键：在菜单操作模式下，起“+”键作用；不在菜单操作模式时，进入刷临时卡入场工作模式。
4、组合键：在菜单操作模式下，起“+”键作用；不在菜单操作模式时，进入刷临时卡出场工作模式。
5、快捷键：快速查询手持机机号和扇区号。
6、、、、数字键：输入0~9的数字键。
四、操作示例注意：本管理器必须进入值班操作状态才可以对进出场车辆卡片，进行正常操作。
1、值班员无卡上下班1.1、在第一次使用手持机的时候，需要登录操作员。
无卡上下班，通过菜单按键进入菜单选项，输入值班员编号（这里的编号不是指操作员的人员编号，而是1至15数字，总共15个编号），然后输入该操作员的密码（操作员密码默认为888888），按“确定”键登录。
注意：手持机上电默认显示出厂时添加的收费员。
2、刷卡记录查询和值班记录查询2.1、查询刷卡记录，通过菜单按键进入菜单选项，如图所示：然后按确定键进入查询界面，如下图所示：2.2、查询值班记录，通过菜单按键进入菜单选项，如图所示：然后按确定键进入查询界面，如下图所示：3、临时卡进出场刷卡操作3.1、临时卡入场需要通过入场按钮进入读卡界面，如下图所示：如果需要预置车牌可按键盘上的‘*’键，如下图所示：注意：需要设置车牌的首字和首字母，必须进入系统设置的车牌预置功能选项。
如果需要把预置卡片类型可以按‘#’键会出现如下界面：在选项了卡类后按确定键会返回到入场刷卡界面，在车辆入场时卡片类型就会被改成预置的卡类，但是此卡类只能更改一次卡类，如果下次还要更改卡类，需要重新预置卡类。
设置好车牌后按确定键返回到进场刷卡界面，刷临时卡进场如下图所示：如果需要把首字更换可以按‘*’键会出现如下界面：注意：如果需要翻页可以按9键进行翻页设置好首字和车牌后按确定键返回到进场刷卡界面，刷临时卡进场如下图所示：3.2、临时卡出场需要通过出场按钮进入读卡界面，如下图所示：然后在卡片感应区读取出场的临时卡就会显示出场收费界面，如下图所示：4、系统参数配置4.1、进入系统参数配置需要通过菜单选项的‘系统参数配置’选项，如图所示：进入系统配置需要输入密码才能进入参数配置，密码默认为： 888888，如果需要修改密码可进入系统配置的密码修改选项进行修改，密码输入界面如下图所示：系统设置的选项有：1：机号设置机号设置的有效设置范围为：1~1272：系统设置a．预警天数设置：可设置卡片过期的提示天数b．读卡模式：选择读卡的出入模式3：IC月卡设置a.进出模式：可选择一进一出和多进多出b.下载有效：设置下载是否有效c.过期收费：IC卡过期是否收费4：其它标识设置a.记录满设置：刷卡记录满后可设置禁止使用和继续使用5：查询IC卡扇区查询扇区号，默认为9扇区6：修改系统密码可以修改系统参数配置的密码7：修改系统时间可以脱机设置手持机的时间8：背光时间可设置在无操作情况下显示屏显亮时间9：读卡时间可设置读卡操作时间10：关机时间可设置自动关机时间，以节约电池电量，设置90秒以上为不省电模式 11：欢迎词选择此设置可选择播报“欢迎光临”或“你好”。
神舟链威C4000手持终端用户手册说明书
SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO., LTDC4000 Handheld TerminalUser Manual1ContentsStatement (4)1.Getting Started (6)1.1 Brief Instruction (6)1.2Precaution before Using Battery (7)2.About The Device (8)2.1 Structure (8)2.2 SD Card Installation (10)2.3 SIM Card Installation (11)2.4 Battery Installation (12)2.5 Battery Charging (13)2.5.1 Direct Charging (13)2.5.2 Cradle Charging (13)2.6 Device Power on/off (13)3.Call Function (14)3.1 Phone (14)3.2 Contacts (15)3.3 Messaging (16)4. Barcode Reader (17)4.1 1D Barcode (17)4.2 2D Barcode (18)4.3 2D(S) Barcode (19)5.RFID Reader (20)5.1 Low Frequency (20)25.2 High Frequency (22)5.2.1 14443A (22)5.2.215693 (23)5.3 Ultra High Frequency (24)6.Fingerprint Reader (26)7.Other Functions (27)7.1 PING (27)7.2Bluetooth (28)7.3 GPS (30)7.4 Volume Settings (31)7.5 Sensor (32)7.6 Keyboard (33)7.7 Network (34)7.8 Keyboardemulator (35)8. Device Specifications (36)3Statement2013 by Shenzhen Chainway Information Technology Co., Limited. All rights reserved.No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission written from Shenzhen Chainway. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice.The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Shenzhen Chainway grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Shenzhen Chainway. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Shenzhen Chainway.Shenzhen Chainway reserves the right to make changes to any software or product to improve reliability, function, or design.Shenzhen Chainway does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.No license is granted, either expressly or by implication, estoppel, or otherwise under any Shenzhen Chainway intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Shenzhen Chainway products.Shenzhen Chainway Information Technology Co., LtdAddress: 9/F, Building 2, Phase 2, Gaoxinqi Industrial Park, Liuxian 1st Rd, District 67, Bao’an, Shenzhen, Guangdong, ChinaTelephone：+0086-755-23223300 Fax: +0086-755-23223310Web Site: Email:*******************451. G etting Started1.1 Brief InstructionChainway C4000 is a series of Android powered smart terminals, with data capture, data processing, wireless communication. It is with high-reliability &high-expansibility. Auto & Accurate data collection is achieved in various business fields via a complete solution of premium options, the flexible solution among options and operators is suited-up. You will find out with C4000, much easier deployment, reduced complexity, decreased maintenance, are the benefits for enterprises.C4000 meets industrial level IP64 (IEC sealing), is sufficient to routine applications, eg, railway inspection, road parking toll, vehicle inspection, logistics express, power inspection, warehousing management, chain retail, etc. Whether the mobile operators are working indoor or outdoor, with Chainway C4000, your business is always &highly efficient on-line.Meeting industrial standards, designed to support a various of mobile solutions. With the build-in high performance Cortex-A7 1.3GHZ quad core processor technology, the operators need only one device to enjoy a convenient and easy job, C4000 will be the ideal choice for key-fact business in mobile solutions, for simplified task flow, enhanced work efficiency, for shortened time to customer response, more satisfied customer care service.Chainway C4000 comes with world wide band WCDMA technology. Multi channels data and voice communication guarantees the real-time communication and data efficiency, C4000 brings you the best ROI.61.2 Precaution before Using Battery•Do not leave batteries unused for extended periods of time, either in the product or in storage. When the battery has been unused for 6 months, check the charge status and charge or dispose of the battery as appropriate. •The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500 charge cycles, whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged, and fully recharged again. Use a two to three year life expectancy for batteries that do not run through complete charge cycles.•Rechargeable Lithium-Ion batteries have a limited life and will gradually lose their capacity to hold a charge. This loss of capacity (aging) is irreversible. As the battery loses capacity, the length of time it will power the product (run time) decreases.•Lithium-Ion batteries continue to slowly discharge (self-discharge) when not in use or while in storage. Routinely check the battery’s charge status. The user manual typically includes information on how to check battery status, as well as battery charging instructions.•Observe and note the run time that a new fully-charged battery provides for powering your product. Use the new battery run time as a basis to compare run times for older batteries. The run time of your battery will vary depending on the product’s configuration and the applications that you run. •Routinely check the battery’s charge status. Carefully monitor batteries that are approaching the end of their estimated life.Consider replacing the battery with a new one if you note either of thefollowing conditions:The battery run time drops below about 80% of the original run time.•The battery charge time increases significantly.•If a battery is stored or otherwise unused for an extended period, be sure to follow the storage instructions in this document. If you do not follow theinstructions, and the battery has no charge remaining when you check it,consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a new battery.•Always follow the charging instructions provided with your product. Refer to your product’s user manual and/or online help for detailed information about charging its battery.•Charge or discharge the battery to approximately 50% of capacity before storage. Charge the battery to approximately 50% of capacity at least once every six months.•Remove the battery and store it separately from the product.•Store the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F).72. A bout The Device2.1 Structure<Front>89<Back>Buttons:ButtonFunctionPower ButtonPress and hold to turn the device on or off App List View Button View a list of apps running Home ButtonPress to return to the home screen Cancel ButtonTap to return to the previous screenDetailed installation steps are as follows:•Open the SIM slot as the direction of ‘Open/Lock’ labeled.•Open the SD slot as the direction of ‘Open/Lock’ labeled.•Install the SD card properly.•Lock the SD slot and SIM slot properly.101. Open the SIM slot as the direction of ‘Open/Lock’ labeled.2. Install the SIM card correctly.3. Lock the SIM slot properly.2 3112.4 Battery Installation1. Push the battery down into the bottom of the battery.2. Push the battery to the direction of the array.3. Turn the battery lock.122.5 Battery Charging2.5.1 Direct ChargingUse the adapter to charge the battery via the USB connector of the snap-on. 2.5.2 Cradle ChargingConnect the adapter with the power cable to charge the device.2.6 Device Power on/offPress the ‘Power’ button on the side shortly due to turn on/off.13143. C all Function3.1 Phone1. Click this icon.2. Click the number button to input the numbers.3. Click the button to confirm and dial.4. Click theto end the calling.Contacts LogsVoice CallingEmulated Numeric Keypad3.2 Contacts1. Click ‘Contacts’ to open the contacts list.2. Click ‘’ to add the new contact.3. Click ‘’ to import/export or delete the contact list.FavoritesContact List Group153.3 Messaging1. Click ‘’ to open the message list.2. Click ‘’ to input the content.3. Click ‘’ to send the message.4. Click ‘’ to add photos, videos.164. Barcode Reader4.1 1D Barcode1. Open the 1D Barcode Demo in Appcenter.2. Press the ‘Scan’ button to start scanning, then the auto interval parameterscan also be set.174.2 2D Barcode1. Open the 2D Barcode Demo in Appcenter.2. Press the ‘Scan’ button to start scanning, then the auto interval parameterscan also be set.184.3 2D(S) Barcode1. Open the 2D(S) Barcode Demo in Appcenter.2. Press the ‘Scan’ button to start scanning, then the auto interval parameterscan also be set.3. Also, the barcode types enabling/disabling can also be set.Note: Please scan the barcode in a correct way, otherwise the scanningmight be failed.19205. R FID Reader5.1 Low Frequency1. Open the RFID_LF Demo within Appcenter and then press the ‘Scan’ button tostart reading.2. Tag types including ID Card/Animal Tag/Hitag/HDX Tag/EM4450 can be alsoselected, and Hitag-S and EM4305 reading/writing are already supported by the device.Please ensure that the LF module is embedded in the device, also please select the tag type correctly, otherwise the operation might not work. Meanwhile, please pay attention to the HDX and FDX-B since they are using different hardware due to the different working principles.215.2 High Frequency5.2.1 14443A1. Open the 14443A demo within Appcenter, and press the ‘Scan’ button to startreading.2. Mifare and Ultra Light reading/writing are also supported.225.2.2 156931. Open the RFID_15693 demo within Appcenter, and press the ‘Scan’ button tostart scanning.2. 15693 writing are also supported.235.3 Ultra High Frequency1. Open the UHF demo within Appcenter, and press the ‘Start’ button to startscanning.2. Multiple tags reading and single tag reading/writing are also supported.2425266. F ingerprint Reader1. Open the Fingerprint Demo in Appcenter.2. Put the finger to the fingerprint module and set the ID/name of the templateunder ‘ACQUISITION’.3. Put the finger to the fingerprint module properly and identify by ID/Name/Scoreunder ‘IDENTIFICATION’.4. The local templates can also be checked under ‘Data’.Please be aware that ISO standards are only supported by devices with ISO fingerprint hardware modules.7. O ther Functions7.1 PING1. Open the Ping in Appcenter.2. Set the Ping parameters and select the internal/external addresses.277.2 Bluetooth1. Open the Bluetooth demo in Appcenter and turn on the Bluetooth.2. Input the content or select the file, then scan the nearby Bluetooth printer andpair them.3. Select the printer and click ‘Print’ to print the content.2829307.3 GPS1. Open the GPS demo in Appcenter and turn on GPS module.2. Set the GPS parameters and get the GPS data information.7.4 Volume Settings1. Open the Volume Setting demo in Appcenter.2. Set the volumes based on the requirements.317.5 Sensor1. Open the Sensor demo in Appcenter.2. Test the sensor based on the requirements.321. Open the Keyboard demo in Handset Appcenter.2. Set and test the key values of the device.331. Open the Network demo in Appcenter.2. Test the WIFI/Mobile signal based on the requirements.34357.8 KeyboardemulatorKeyboard Emulator can be used directly for multiple using environments and the output formats can include prefix/suffix/enter/tap can also be defined, please define the options properly based on the features of the device.1. Open the Keyboardemulator which is preinstalled in the device.2. Click the options correctly based on the features of the device hardware,please also press the physical button to define the scan button, then please define the output formats based on the requirements, finally click ‘Open’ to save and enable it.8. Device SpecificationsPhysical CharacteristicsDimensions 153mm*75mm*29mm/6.02*2.95*1.14in.Weight 286g/10.09oz. (includes main battery)Screen 4in.WVGA (480*800) TFT-LCD, capacitive dual touchKeyboard 3 function keys, 3 side buttonsBattery Main bat. (rechargeable li-ion polymer, 3.7V, 3200 mAh)Pistol bat. (rechargeable li-ion polymer, 3.7V, 5200 mAh)Expansion Slot MicroSD/TF, maximum capacity of 32GSIM Slot 1 PSAM, 1 SIM, 1 MicroSDAudio 0.5WCamera OV 8M pixels, auto focus with LED flashPerformance CharacteristicsCPU Cortex-A7 1.3GHz quad coreOS Android 4.4.2Memory 1GB RAM, Build-in 4GB FlashInterface USB Micro-B, serial port RS-232(TTL)Storage Card Type MicroSD cardMaximum Expansion Storage 32GBUser Environmental CharacteristicsOperating Temperature -10℃to 50℃Storage Temperature -40℃to 70℃Humidity 5%RH-95%RH（non-condensing）Dropping Survive 1.2m/3.9ft. drop, 6 sides (concrete floor under operating temp.)Sealing IP64, IEC complianceWireless CommunicationWAN WCDMA/HSDPA/HSPA+ (850/1900/2100MHz)GSM/GPRS/EDGE (850/900/1800/1900MHz)WLAN IEEE802.11b/g/n, internal antenna36WPAN Bluetooth v4.0 Low EnergyBluetooth 3.0+HSBluetooth v4.0 Low Energy (LE)Data CollectionBarcode Scan Engine 1D barcode（Symbol SE955, laser）(optional)2D CMOS laser scanner: Symbol SE4750(optional) Sensor resolution: 750 * 480Roll tolerance: 360ºRFID LF 125KHz/134.2KHz, HDX/FDX-B(optional)HF 13.56MHz, ISO14443A/ISO15693(optional)UHF 860-960MHz, EPC C1 GEN2/ISO18000-6C(optional) Developing EnvironmentSDK Chainway SDKProgramming Language JavaDeveloping Tool Eclipse37。
手持采集终端操作方法
手持采集终端操作方法手持采集终端（Handheld Data Terminal）是一种便携式设备，用于采集和处理数据。
它通常具有小巧的尺寸、轻便的重量和易于使用的界面。
手持采集终端被广泛应用于物流、仓储管理、零售、快递、制造业等领域，能够实现数据的实时采集和传输，提高工作效率和准确性。
以下是手持采集终端的一些基本操作方法：1. 打开设备：按下电源键或将手持终端插入电池。
2. 屏幕操作：手持终端通常配备有触摸屏，可以通过手指或者手写笔进行触摸操作。
在屏幕上轻轻滑动或点击，可以实现菜单选择、数据输入等功能。
3. 导航按钮：手持终端上通常配有多个导航按钮，如方向键、回退键等。
通过这些按钮可以在不同的界面之间进行切换和操作。
4. 键盘输入：某些手持终端还配置了物理键盘，可以通过键盘输入文字、数字、符号等。
在输入过程中，可以使用Shift键或Fn键来切换字符类型。
5. 扫描功能：手持终端通常配备二维码或条码扫描器，可以通过扫描物体上的二维码或条码来获取相关信息。
打开扫描程序，将扫描头对准条码，扫描程序会自动读取条码信息并显示在屏幕上。
6. 数据采集：手持终端可以采集各种类型的数据，如商品信息、库存数量、销售数据等。
通过界面操作或扫描功能，可以方便地录入和采集相关的数据。
7. 数据存储和传输：采集到的数据可以存储在手持终端的内部存储器或外部存储卡中。
另外，手持终端通常也支持无线网络连接，可以通过Wi-Fi、蓝牙或移动网络将采集到的数据传输到其他设备或后台管理系统中。
8. 软件应用：手持终端上预装了一些常用的采集应用软件，例如库存管理、收银、订单查询等。
根据不同的需求，可以选择不同的应用程序进行操作和数据采集。
9. 数据处理：手持终端上的采集数据可以进行实时处理和分析。
例如，在库存管理中，可以通过手持终端实时查询和更新库存信息，提醒补货等。
10. 关闭设备：当使用完手持终端后，应该及时关闭设备以节约电池电量。
Hytera数字手持终端BD352i使用说明书
DIGITAL PORTABLE RADIO数字手持终端BD352i OWNER’S MANUALBD352i使用说明书Welcome to the world of Hytera and thank you for purchasing this product.This manual includes a description of the functions and step-by-step procedures for use.It also includes a troubleshooting guide.To avoid bodily injury or property loss caused by incorrect operation,please carefully read the Safety Information Booklet before use.This manual is applicable to the following product:BD352i Digital Portable RadioCopyright InformationHytera is the trademark or registered trademark of Hytera Communications Corporation Limited(the Company)in the People's Republic of China(PRC) and/or other countries or areas.The Company retains the ownership of its trademarks and product names.All other trademarks and/or product names that may be used in this manual are properties of their respective owners. The product described in this manual may include the Company's computer programs stored in memory or other ws in PRC and/or other countries or areas protect the exclusive rights of the Company with respect to its computer programs.The purchase of this product shall not be deemed to grant,either directly or by implication,any rights to the purchaser regarding the Company's computer programs.The Company's computer programs may not be copied,modified,distributed,decompiled,or reverse-engineered in any manner without the prior written consent of the Company. DisclaimerThe Company endeavors to achieve the accuracy and completeness of this manual,but no warranty of accuracy or reliability is given.All the specifications and designs are subject to change without notice due to continuous technological development.No part of this manual may be copied,modified,translated,or distributed in any manner without the prior written consent of the Company.We do not guarantee,for any particular purpose,the accuracy,validity, timeliness,legitimacy or completeness of the third-party products and contents involved in this manual.If you have any suggestions or would like to receive more information, please visit our website at:.FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part15of FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates and can radiate radio frequency energy.If not installed and used in accordance with the instructions,it may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.Verification of harmful interference by this equipment to radio or television reception can be determined by turning it off and then on.The user is encouraged to try to correct the interference by one or more of the following measures:·Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.·Connect the equipment into an outlet on a different circuit to that of the receiver's outlet.·Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions:·This device may not cause harmful interference.·This device must accept any interference received,including interference that may cause undesired operation.Note:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Compliance with RF Exposure Standards Hytera's portable radio complies with the following RF energy exposure standards and guidelines:·United States Federal Communications Commission,Code of Federal Regulations;47CFR§1.1307,1.1310and2.1093.·American National Standards Institute(ANSI)/Institute of Electrical and Electronic Engineers(IEEE)C95.1:2005;Canada RSS102Issue5 March2015.·Institute of Electrical and Electronic Engineers(IEEE)C95.1:2005 EditionRF Exposure Compliance and Control Guidelines and Operating InstructionsTo control your exposure and ensure compliance with the occupational/controlled environmental exposure limits,always adhere to the following procedures.Guidelines:·Do not remove the RF Exposure Label from the device.·User awareness instructions should accompany device when transferred to other users.·Do not use this device if the operational requirements described herein are not met.Operating Instructions:·Transmit no more than the rated duty factor of50%of the time.To transmit(talk),push the Push-To-Talk(PTT)button.To receive calls, release the PTT button.Transmitting50%of the time,or less,isimportant because the radio generates measurable RF energy only when transmitting(in terms of measuring for standards compliance).·Keep the radio unit at least2.5cm away from the face.Keeping the radio at the proper distance is important as RF exposure decreases with distance from the antenna.The antenna should be kept away from the face and eyes.·When worn on the body,always place the radio in a Hytera-approved holder,holster,case,or body harness or by use of the correct clip for this e of non-approved accessories may result in exposure levels which exceed the FCC's occupational/controlled environmental RF exposure limits.·Use of non-approved antennas,batteries,and accessories causes the radio to exceed the FCC RF exposure guidelines.·Contact your local dealer for the product's optional accessories.IC StatementThe device has been tested and complies with SAR limits,users can obtain Canadian information on RF exposure and complianceAprès examen de ce matériel aux conformitéaux limites DAS et/ou aux limites d’intensitéde champ RF,les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformitéand compliance d’acquérir les informations correspondantesThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:·This device may not cause harmful interference.·This device must accept any interference received,including interference that may cause undesired operation.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes:(1)l'appareil ne doit pas produire de brouillage, et(2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,même si le brouillage est susceptible d'en compromettre le fonctionnementEU Regulatory ConformanceAs certified by the qualified laboratory,the product is in compliance with the essential requirements and other relevant provisions of the following directives:1999/5/EC or2014/53/EU,2006/66/EC,2011/65/EU,and 2012/19/EU.Please note that the above information is applicable to EU countries only.ContentsPacking List 2Product Overview3ProductControls 3LCD Icons 4LED Indications 4Before Use4Attaching the Antenna 4Attaching the Battery 4Attaching the Belt Clip5Attaching the Audio Accessories 5Charging the Battery5Checking the Battery Power 5Basic Operations 6Call Services6Call on Digital Channel6Callon Analog Channel (Without Signaling)6Optional Features 7Troubleshooting 9Care and CleaningProductCare 11ProductCleaning 11Optional Accessories1111ContentsPlease unpack carefully and check that all items listed below are received.If any item is missing or damaged,please contact your dealer.Item Quantity(PCS)Item Quantity(PCS) Radio1Belt Clip1 Battery1Strap1 Power Adapter1Documentation Kit1 Antenna1//Check whether the frequency band marked on the antenna label matches that on the radio label.If not,please contact your dealer.Product ControlsYou can request your dealer to program your radio to use the SK as the shortcut to a radio feature.LCDIconsLED IndicationsLED Indicator Radio StatusFlashes green Being turned on.Glows green Receiving.Glows redTransmitting.Flashes orange slowlyScanning.GlowsorangeCall hang time:No voice is being transmitted or received on the channel during a call.Within such a period,you can press and hold the PTT key and speak.Attaching the Antenna1.Place the antenna in its receptacle.2.Rotate the antenna clockwise until hand tight.Do not hold the radio by the antenna,as it may reduce the radio performance and life span of theantenna.Attaching the Battery1.Slide the battery latch to the unlock position,and remove the battery cover.2.Align the battery contacts with the contacts in the battery compartment,and press the battery into place.3.Insert the protrusions at the top of the battery cover into the radio,and press the cover into place.4.Slide the battery latch to the lock position.To remove the battery,make sure the radio is turned off,remove the battery cover,and lift the bottom of the battery.Attaching the Belt Clipe a Phillips screwdriver to turn the screws counterclockwise on the back of the radio and remove them.2.Align the screw holes on the belt clip with those on the back of the radio.3.Put the screws back in place,and use the Phillips screwdriver to turn them clockwise until hand tight.Attaching the Audio Accessories1.Open the accessory connector cover.2.Plug the accessory into the accessory connector.3.Rotate the accessory plug clockwise into place.Charging the Battery·Use the charger specified by Hytera to charge the battery.·Read the Safety Information Booklet before charging.The battery delivered with the radio is uncharged.To ensure optimum performance,fully charge the battery before initial use.It is recommended that your radio remain powered off during charging.To charge the battery,do as follows:1.Insert the USB connector of the power adapter into the USB port of the radio.2.Plug the power adapter into a power outlet,and then switch the power out-let onChecking the Battery PowerTo check the current battery power,press and hold the Battery Power Indicator key preprogrammed by your dealer.The following table lists battery power indications.The icon indicates thatthe battery runs low.In this case,please recharge or replace the batteryLED Indicator Alert Tone Battery Power Glows green Three beepsGlows orange Two beepsGlows red One beepFlashes red Low battery toneIf you want to…Then…Turn on/off the radio Press the On-Off key. Increase the volume Press the Volume Up key. Decrease the volume Press the Volume Down key. Select a channel Rotate the Channel Selector knob.Call on Digital ChannelYou can initiate a call to or receive acall from the private or group contactpreset for a digital channel.Initiating a Call1.Select the required channel.2.Hold the radio vertically2.5to5cm from your mouth.3.Press and hold the PTT key,and thenspeak into the microphone.The radio displays for an outgoing group call and for an outgoing private call.Receiving and Responding to a CallWhen receiving a call,you can listen to it without any operation.The radio displays for an incoming group call and for an incoming private call.You can press and hold the PTT key and speak within the preset time period.Call on Analog Channel(Without Signaling) You can initial a call to or receive calls from all other users on an analog channel.The operations are the same as those on a digital channel.The following features need to be programmed by your dealer.Please contact your dealer for detailed operations. Type Feature DescriptionGeneral Feature Zone Allows you to select a zone.The radio supports up to16zones,with a maximum of256channels per zone.Power Level Allows you to switch the transmit power level between high and low.Scan Allows the radio to scan all channels in the scan list preset for the current channel and stay on a channel with activities. Emergency Alarm Allows you to initiate an emergency alarm or call to ask for help in case of emergencies.Busy Channel Lockout Prevents the radio from transmitting on a busy channel.Time-out Timer(TOT)Terminates transmission when the preset time period expires.Keypad LockAllows the keypad to be locked automatically when the radio does not detect any activity or operation within the presetperiod.Battery SaveAllows the radio to automatically enter the battery save mode when it does not detect any activity or operation within thepreset period.Digital Feature All Call Allows you to initiate a call to all users on a digital channel.One Touch Call Allows you to press one key to call the predefined private or group contact. TDMA Direct Mode Allows the radio to operate on a channel with two time slots.Type Feature DescriptionAnalog Feature Squelch Off Allows the radio's speaker to always keep unmuted.Squelch Off Momentary Allows the radio's speaker to keep unmuted when you press and hold the preprogrammed key. Squelch Level Allows you to adjust the squelch threshold required for the radio to unmute.Monitor Allows the radio to monitor activities on the channel.Scrambler Allows you to encrypt the transmitted voice to prevent eavesdropping.CTCSS/CDCSS Allows you to prevent unwanted calls on the same frequency.Phenomena Analysis SolutionYou are unable to hear anyone because of too much noise and hiss.You may be too far away from other members.Move towards other members.You may be located in an unfavorable position.Forexample,your communication may be blocked by highbuildings or blocked in an underground area.Move to an open and flat area,and restart the radio and trycontacting again.It could be the result of external disturbance(such aselectromagnetic interference).Stay away from equipment that may cause interference.The OLED does notdisplay any information.The OLED may fail to function temporarily.Restart the radio.If the above solutions cannot fix your problems, or you may have some other queries, please contact us or your local dealer for more technical support.To guarantee optimal performance as well as a long service life of the product,please follow these tips.Product Care·Do not pierce or scrape the product.·Keep the product far away from substances that can corrode the circuitry.·Do not hold the product by the antenna or earpiece cable.·Close the accessory connector cover when no accessory is in use.Product CleaningTurn off the product and remove the battery before cleaning.·Clean up the dust and fine particles on the products surface and charging piece with a clean and dry lint-free cloth or a brush regularly ·Use neutral cleanser and a non-woven fabric to clean the keys,knobs and front case after long-time use.Do not use chemical preparations such as stain removers,alcohol,sprays or oil preparations,so as to avoid surface case damage.·Make sure the product is completely dry before use.Use the accessories specified by Hytera only;otherwise,the Company will not be liable for any loss or damage arising out of the use of any unauthorised accessories.Contact your local dealer for the optional accessories used with the product.非常感谢您对我们产品的青睐！本手册旨在让您快速掌握终端的使用。
MC32N0手持终端使用说明
MC32N0手持终端使用说明一．常用快捷方式1.PDA死机后，热启动快捷方式：长按红色电源键5秒以上。
PDA开始执行热启动时，松开电源按钮。
2.PDA死机后，冷启动快捷方式：按住数字1和9不放，再按红色电源键。
3.屏幕重新校验快捷方式：FUNC+ESC键；在检验屏幕中不想进行校验，按esc键取消即可。
4.PDA发送程序快捷方式到桌面的步骤：a.双击桌面“我的设备”→双击“Application”磁盘→双击新建的“WXWS_PDA”文件夹（根据实际情况新建文件夹）→单击选中“WXWS_PDA"程序；b.打开菜单栏“文件”→“发送到”→“桌面快捷方式”。
二.连接网络步骤1.桌面右下角的网络图标显示下图1所示图标灰色打叉，即wifi功能未打开。
图12.点击该图标出现图2所示界面，点击“启用无线电”即可。
图23.点击图3中第二个配置项“管理配置文件”设置wifi的热点及密码。
图34.在弹出界面图4所示根据实际情况选择对应的wifi热点，长按该热点2秒以上弹出菜单界面，点击“创建配置文件”。
图45.配置热点有9到10个步骤，每个步骤都有一张截图，截图中没有说明即默认接着点击下一步即可。
6.有时显示已经成功连上wifi，但实际就是连不上网络，此时可以通过如下步骤进行设置下（如果wifi 可以正常访问网络就忽略该步骤）。
7.该步骤是实现冷启动后wifi配置不丢失的功能，一劳永逸。
三.打开DataWedge扫码程序步骤四．把项目PDA程序拷贝到设备中1.设备冷启动后，application磁盘下的文件不会丢失，所以需将项目PDA程序拷贝到该磁盘下。
2.设备需要通过底座及数据线连到电脑上，安装Windows Mobile设备中心驱动。
3.设备连接成功的标志是在电脑里能看到如下Compact的磁盘图标（类似U盘图标）4.在application目录下根据实际情况新建一个文件夹，比如这里新建了一个“WXWS_PDA”的文件夹5.将项目PDA程序文件从电脑上拷贝到上述新建的文件夹中6.发送pda程序快捷方式到桌面。
手持终端操作说明书
手持终端操作说明操作说明书中关村工信二维码技术研究院2013年12月1日目录一.产品介绍 (3)二.操作流程 (3)2.1登录流程 (3)2.2连接蓝牙打印机 (4)2.3上班 (5)单路段上班 (5)多路段上班 (5)2.4交易 (7)车辆进场-1 (7)车辆进场-2 (10)车辆离场 (10)未缴费 (13)2.5打印 (15)2.6逃费补交 (15)2.7信息查询 (16)2.8系统设置 (19)2.9关于 (22)三.故障排除 (23)手持终端使用说明书一·产品介绍产品外观图如下：二·操作流程2·1登录流程开机后系统自动进入登录界面（图1-1），等待网络连接成功后点击登录，登录时后台服务器会将交班信息下载更新到POS机中，参数有变动时系统会自动下载并更新参数，联机登录完成后会提示登录成功（图1-2）。
2-1登录界面2-2 登录成功2·2连接蓝牙打印机登录完成后，如果蓝牙打印机没有绑定(图2-3)，根据提示点确定先绑定蓝牙mac，选择可用设备，输入pin密码0000，完成绑定。
绑定完成后返回自动连接蓝牙打印机。
如果打印机已绑定，则开机自动连接。
进入主界面。
2-3 2-42·3上班单路段上班收费员在签退状态下点击“上班”图标，进入系统主菜单界面（图2-5），打印机打印签到凭据（图2-6）。
（注：上班成功后，才能使用停车收费、逃费补交、信息查询、打印等相关功能，并且图标会由灰色不可点击变成彩色可点击的状态）2-5 2-6多路段上班点击上班，可以选择相应的路段上班（图2-7），实现收费员轮岗操作。
2-7占道停车上班凭证执收单位：停车收费管理中心终端序列号：2A002757终端号：00000015工号：PB0020 姓名：XXX批次号：000001 流水号：000003收费路段：国际大厦日期时间：2013/07/26 12:00交班预收款：￥30.00车位序号车位唯一号车牌01 00000577 冀A1234502 00000578 冀A1234603 00000579 冀A1234704 00000580 冀A1234805 00000581 冀A1234906 00000582 冀A12340签到凭据说明：收费员完成上班操作后，POS机自动连接管理平台下载上一班没有离场的车辆信息，包括车辆停放的泊位、车牌号等信息、上一班预收。
PD560数字手持终端使用说明书
数字手持终端PD560 使用说明书非常感谢您对我们产品的青睐！本手册旨在让您快速掌握本产品的使用，了解产品详细功能和操作。
为了避免因不当操作而给您带来身体伤害或财产损失，请于使用本产品前详细阅读《安全信息手册》。
本手册适用于以下机型：PD560 数字手持终端版权信息Hytera为海能达通信股份有限公司（以下简称“我司”）在中华人民共和国和世界其他国家和/或地区的商标或注册商标。
我司仅对自有商标及产品名称享有所有权，本手册中可能提及的其他商标和产品名称为各自所有者所有。
本手册介绍的产品中可能包括存储于内存或其他媒介中的计算机程序。
我司对此等程序享有的专有权利受中华人民共和国或其他国家及相关国际法的保护。
购买本产品并不意味着我司以明示或暗示方式向购买者授予有关此等电脑程序的权益。
未经我司事先书面授权，任何企业、组织或个人不得对计算机程序进行任何形式的复制、更改、散发、反编译和反向工程。
免责声明本手册在编制过程中力求内容的准确性与完整性，但对于可能出现的错误或疏漏，我司不承担任何责任。
由于技术的不断发展，我司保留不予通知而更改产品设计与规格的权利。
未经我司事先书面授权，不得以任何形式对本手册进行复制、修改、翻译和散发。
本手册中涉及的第三方产品和内容归第三方所有，我司对其准确性、有效性、及时性、合法性或完整性均不提供保证。
如需更多信息或对本手册有任何建议，欢迎访问我们的网站：，或拨打我司服务热线：400-830-7020。
美国联邦通信委员会监管要求按照美国联邦通信委员会的监管要求，终端必须符合美国联邦通信委员会射频辐射限制规定，否则不能在美国市场上销售。
并要求制造商可通过在产品上张贴标签的方式，告知用户应注意的事项，提高用户的防辐射意识。
射频辐射控制及操作说明为了使产品发挥最佳性能及确保符合上述标准中有关职业或受控环境中的辐射限制要求，发送时间不得超过额定因数的50%（最高50%的时间发射），且需遵照下列说明：l 仅在发射（讲话）时产生射频能量辐射，接收（收听）和待机时均不会产生。
手持终端CK920操作说明01
手持终端CK920操作说明01药品电子监管码数据采集系统一、登陆界面如错误！未找到引用源。
所示图11.初始用户名为1，密码为1。
2.用户名1234为预留，不能使用，升级时使用。
注：s1键为返回重置键，s2键为确认键.二、主界面如图2所示图2注：首先需要进行系统设置，再进入数据通讯进行设置。
（操作如下）三、系统设置界面如错误！未找到引用源。
所示图31.药品类型设置：可将药品类型设置为普药、特药、混合使用。
2.企业类型设置：根据企业的性质设置企业。
3.终端编号设置：只能输入一位，必须大写，不能重复。
作用：拥有多个终端时，判断哪个终端录入的数据。
4.往来单位：设置终端编号时需要配合口令，100为不跳过往来单位，166为可以跳过往来单位，默认为可以跳过往来单位，不需要设置。
5.通讯类型：默认为有线，无线设置请看无线通讯设置。
6.商品码设置：选择不读取商品码。
四、出入库扫描主界面图4所示图4出库扫描：1. 主界面如图5所示。
图52. 选择对应的操作，点击进入如图6所示。
图6注：单号不能大于20位，如果输入了终端编号单号不能大于19位3.选择委托客户或选择往来单位，键盘界面如错误！未找到引用源。
所示，手写界面如图7所示。
图74. 扫描药监码界面如图8所示图8扫描条码开始出库，扫描完成后按S1返回，退出。
入库扫描：和出库扫描类似。
五、数据查询数据查询界面如图9所示图9 入库查询界面如图10所示图10 与入库类似。
六、数据通讯有线通讯：1.点击数据通讯如图11所示图112.打开电子监管码客户端图12点击升级手持终端，在口令里输入2581点退出，主界面会出现设备选择.如图13所示图13选择CK920后，点接收数据。
接收成功后在监管系统的入出单管理查询、上传。
无线通讯：1.打开扫码枪进入“药品电子监管码数据采集系统”按“Esc”键，输入密码，密码是当前日期的月份加上号数减去8（例如：今天是3月21号，密码就为：313）。
数字手持终端 DIGITAL PORTABLE RADIO 使用说明书
DIGITAL PORTABLE RADIO数字手持终端OWNER’S MANUAL使用说明书Copyright InformationHytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in PRC and/or other countries or areas. The Company retains the ownership of its trademarks and product names. All other trademarks and/or product names that may be used in this manual are properties of their respective owners.The product described in this manual may include the Company’s computer programs stored in memory or other media. Laws in PRC and/ or other countries or areas protect the exclusive rights of the Company with respect to its computer programs. The purchase of this product shall not be deemed to grant, either directly or by implication, any rights to the purchaser regarding the Company’s computer programs. Any of the Company’s computer programs may not be copied, modified, distributed, decompiled, or reverse-engineered in any manner without the prior written consent of the Company.DisclaimerThe Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technology development. No part of this manual may be copied, modified, translated, or distributed in any manner without the prior written consent of the Company.We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of the Third Party products and contents involved in this manual.If you have any suggestions or would like to learn more details, please visit our website at: .FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct.The interference by one or more of the following measures:●Reorient or relocate the receiving antenna. Increase the separationbetween the equipment and receiver.●Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.●Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Compliance with RF Exposure StandardsHytera’s portable radio complies with the following RF energy exposure standards and guidelines:●United States Federal Communications Commission, Code of FederalRegulations; 47 CFR § 1.1307, 1.1310 and 2.1093●American National Standards Institute (ANSI) / Institute of Electricaland Electronic Engineers (IEEE) C95. 1:2005; Canada RSS102 Issue5 March 2015.●Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005EditionRF Exposure Compliance and Control Guidelines and Operating InstructionsT o control your exposure and ensure compliance with the occupational/ controlled environment exposure limits always adhere to the following procedures.Guidelines:●Do not remove the RF Exposure Label from the device.●User awareness instructions should accompany device whentransferred to other users.●Do not use this device if the operational requirements described hereinare not met.Operating Instructions:●Transmit no more than the rated duty factor of 50% of the time. T otransmit (talk), push the Push-T o-T alk (PTT) button. T o receive calls, release the PTT button. Transmitting 50% of the time, or less, isimportant because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance).●Hold the radio in a vertical position in front of face with the microphone(and the other parts of the radio, including the antenna) at least one inch (2.5 cm) away from the nose. Keeping the radio at the proper distance is important because RF exposures decrease with distance from the antenna. Antenna should be kept away from eyes.●When worn on the body, always place the radio in a Hytera’s approvedclip, holder, holster, case, or body harness for this product. Using approved body-worn accessories is important because the use of Hytera’s or other manufacturer’s non-approved accessories may result in exposure levels, which exceed the FCC’s occupational/controlled environment RF exposure limits.●If you are not using a body-worn accessory and are not using theradio in the intended use position in front of the face, then ensure the antenna and the radio are kept at least 2.5 cm (one inch) from the body when transmitting. Keeping the radio at the proper distance is important because RF exposures decrease with increasing distance from the antenna.●Use only manufacturer’s name approved supplied or replacementantennas, batteries, and accessories. Use of non-manufacturer-name approved antennas, batteries, and accessories may exceed the FCC RF exposure guidelines.●Contact your local dealer for the optional accessories of the product. IC StatementThe device has been tested and compliance with SAR limits, users canobtain Canadian information on RF exposure and complianceAprès examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantesThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference thatmay cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnementEU Regulatory ConformanceAs certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the following directives:●1999/5/EC or 2014/53/EU●2006/66/EC●2011/65/EU●2012/19/EUPlease note that the above information is applicable to EU countries only.Items in the Package ----------------------------------------1 Product Overview --------------------------------------------2 Product Controls ---------------------------------------------------2 LED Indication ------------------------------------------------------3 Before Use ------------------------------------------------------3 Attaching the Antenna --------------------------------------------3 Attaching the Battery ----------------------------------------------3 Attaching the Belt Clip --------------------------------------------4 Attaching the Audio Accessories -------------------------------4 Charging the Battery ----------------------------------------------4 Checking the Battery Power ------------------------------------4 Basic Operations ---------------------------------------------5 Call Services ---------------------------------------------------5 Call on Digital Channel -------------------------------------------5 Call on Analog Channel (Without Signaling) ----------------5 Optional Features --------------------------------------------6 Troubleshooting ----------------------------------------------7Care and Cleaning -------------------------------------------8 Optional Accessories ---------------------------------------8Contents2LED IndicationLED Indicator Radio Status Flashes green Being turned on.Glows green Receiving.Glows red Transmitting.Flashes orange slowly Scanning.Glows orange Call hang time: No voice is beingtransmitted or received on the channelduring a call. Within such a period, youcan hold down the PTT key to speak.Attaching the Antenna1.Place the antenna in its receptacle.2.Rotate the antenna clockwise.Do not hold the radio by its antenna; otherwise, theradio performance may be reduced and the life span ofthe antenna may be shortened.Attaching the Battery1.Slide the battery latch to the unlock position, and remove the batterycover.2.Align the battery contacts with the contacts in the batterycompartment, and press the battery into place.3.Insert the two protrusions at the top of the battery cover into the radio,and press the cover into palce.4.Slide the battery latch to the lock position.To remove the battery, make sure that the radio isturned off, remove the battery cover, and lift the bottomof the battery.Caution3Attaching the Belt Clip1.Unfasten the two screws on the back of the radio.2.Align the screw holes on the belt clip with those on the back of theradio.3.Tighten the screws.Attaching the Audio Accessories1.Open the accessory connector cover.2.Plug the accessory into the accessory connector.3.Rotate the accessory plug clockwise into place.Charging the BatteryBe sure to charge the battery fully before initial use, since reduction of state of charge (SoC) may lead to low battery alarm. It is recommended that your radio remain powered off during charging.To charge the battery, insert the USB plug of the power adapter into the USB connector of the radio, and then connect the power adapter to the main supply.The charging indicator on the radio shows the charging status. For details, see the following table.Charging Indicator Charging StatusGlows red The battery is charging.Glows green The battery is fully charged.Checking the Battery PowerYou can check the current battery power by holding down the Battery Power Indicator key programmed by your dealer, and release the key to exit. The following table lists battery power indications:LED Indicator Alert Tone Battery PowerGlows green Three beeps HighGlows orange Two beeps MediumGlows red One beep LowFlashes red Low battery toneUnder the low batterythreshold. Pleaserecharge or replace thebattery.4If you want to…Do this…Turn on/off the radio Press the On-Off key.Increase the volume Press the Volume Up key. Decrease the volume Press the Volume Down key. Select a channel Rotate the Channel Selector knob.Call on Digital ChannelOn the digital channel, you can initiate or respond to a group call or private call. A group call is a call from an individual user to a group of users. A private call is a call from an individual user to another individual user.Initiating a Call1.Select the required channel.2.Hold the radio vertically 2.5 to 5 cm from your mouth.3.Hold down the PTT key and speak when the radio is in standby mode.Receiving and Responding to a CallWhen receiving a call, you can listen to it without any operation. You can hold down the PTT key to respond within the preset time period.Call on Analog Channel (Without Signaling)A call on analog channel is from an individual user to all users on the channel. The operations are the same as the call on digital channel.5The following features need to be programmed by your dealer. Please contact your dealer for detailed operations.Type Feature DescriptionRadio Feature ZoneAllows you to select a zone. Theradio supports up to 3 zones, with amaximum of 16 channels per zone.PowerLevelAllows you to switch the transmit powerlevel between high and low.ScanAllows the radio to scan all channelsin the scan list programmed for thecurrent channel.EmergencyAlarmAllows you to initiate an emergencyalarm or call at any time to ask for helpin case of emergencies.BusyChannelLockoutPrevents the radio from transmitting ona busy channel.Time-out Timer(TOT)Terminates transmission when thepreset time period expires.BatterySaveAllows the radio to automatically enterthe battery save mode when detectingno activity or operation within a certaintime period.DigitalFeatureOne TouchCallAllows you to press one key to call thepredefined private or group contact.All CallAllows you to initiate a call to all userson the channel.TDMADirectModeAllows the radio to operate on achannel with two time slots.AnalogFeatureSquelch OffAllows the radio's speaker to alwayskeep unmuted.SquelchLevelAllows you to adjust the squelchthreshold required for the radio tounmute.MonitorAllows the radio to monitor activities onthe channel.CTCSS/CDCSSAllows you to prevent unwanted callson the same frequency.6To guarantee optimal performance as well as a long service life of the product, please follow the tips below.Product Care●Do not pierce or scrape the product.●Keep the product far away from substances that can corrode thecircuit.●Do not hold the product by its antenna or earpiece cable.●Close the accessory connector cover when no accessory is in use.Product Cleaningcleaning.●Clean up the dust and fine particles on the product surface andcharging piece with a clean and dry lint-free cloth or a brush regularly.●Use neutral cleanser and a non-woven fabric to clean the keys, knobsand front case after long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or oil preparations, so as to avoid surface case damage.●Make sure the product is completely dry before use. Contact your local dealer for the optional accessories of the product.Use the accessories specified by the Company only;otherwise, the Company shall not be liable for anyloss or damage arising out of use of unauthorizedaccessories.CautionCaution8版权信息Hytera为海能达通信股份有限公司（以下简称“我司”）在中华人民共和国和世界其他国家和/或地区的商标或注册商标。
手持移动数据终端 用户手册说明书
手持移动数据终端用户手册（V1.00）目录第一章产品介绍 (4)1.1 产品技术参数 (4)1.2 外部结构 (7)1.3 键盘说明 (9)1.4 随机配件 (10)1.5 可选配件 (10)第二章使用入门 (12)2.1更换电池 (12)2.2安装TF卡 (13)2.3安装SIM卡 (14)2.4 手柄拆装 (15)2.4 电池充电 (15)2.5 TF卡使用 (16)2.6 休眠与唤醒 (16)2.7 任务栏 (17)2.8桌面 (18)2.9 设备复位 (19)第三章系统设置 (20)3.1Internet选项 (22)3.2PC连接 (24)3.3存储管理器 (25)3.4电源管理设置 (25)3.5键盘属性 (26)3.6区域设置 (27)3.7日期和时间设置 (28)3.8删除程序 (29)3.9输入面板 (30)3.10鼠标 (30)3.11所有者（设备使用者私人信息） (31)3.12网络连接和拨号 (32)3.13系统信息设置 (33)3.14显示及背光设置 (34)3.15音量和声音 (36)3.16拨号设置 (37)3.17证书管理 (37)3.18笔针 (38)3.20 蓝牙管理器 (39)3.21 USB同步修复 (39)3.22 HMS模块电源管理 (40)第四章键盘及输入法 (41)4.1软件盘的使用 (41)4.2输入法 (42)第五章网络连接 (43)5.1WIFI网络连接 (43)5.2GPRS拨号连接 (45)5.2.1 GPRS配置说明 (45)5.2.2 GPRS拨号操作 (50)第六章手持移动数据终端与电脑同步连接 (52)6.1 同步软件安装说明 (52)第七章功能使用 (57)7.1 扫描器的使用 (57)7.2 RFID的使用 (58)7.3 GPS (60)7.4拍照 (60)7.5蓝牙 (61)第八章故障排除 (62)8.1 设备及系统故障 (62)8.2扫描故障 (62)8.3RFID故障 (63)8.4 网络及通讯故障 (63)8.5 WIFI连接故障 (63)8.6 其它故障 (64)第九章保养维护 (64)第一章产品介绍本设备将“ALL IN ONE”的设计理念贯穿其中，它将图像获取、无线通讯、条码扫描、RFID读写器等功能集成一身。
手持终端操作说明1
手持终端操作说明一、电池及电话卡的安装参照手机电池及电话卡的安装方法方法二、开机、关机及归出厂值产品按键如图所示：1.开机关机状态下，先按一下橙色“”，再按一下“”2.关机长按电源键“”约5s3.归出厂值同时按住橙色“”和电源键“”不放，约5秒钟后将自动重启，重启后手持终端会出现触屏校准过程，按相关提示操作即可。
三、驱动安装将设备开机状态下连接上电脑后，系统将自动安装驱动程序；若未能成功安装需手动安装驱动文件。
四、权限分配及执照发布1.登陆“乔松燃气管理系统”→“系统设置”→“操作员管理”中添加需要的用户名及其权限；2.点击“乔松燃气管理系统远程服务器”选择“发布操作员执照”点击刷新后使用鼠标双击该用户名名称，在右方操作权限下出现该用户名称时为选中，点击“发布执照”按钮；3.在“QsIpServer”文件夹下选择“license.dat”文件，将其拷贝到“智能手持终端”→“我的设备”→“FlashDisk2”中。
五、软件登陆及GPRS连接1.双击“QSMT”图标，进入设置界面，在用户名一栏中输入以上发布的执照名称和对应的密码；2.等待“GPRS连接”图标变为黑色后，点击该按钮，等待提示“连接成功”后即可进行相应操作。
若未提示“连接成功”则反复连接直到成功为止。
（由于各地区信号强度不同，则连接的所需时间均不相同）六、日常操作说明1.购气输入需要购气用户的缴费账号点击“读手持器”按钮或将用户的手持器打开点击“读手持器”按钮将用户信息读出后，填入需要购入气量方数和对应的金额（只有输入的金额大于或等于应收的金额时才能完成购气）2.维护输入需要购气用户的缴费账号点击“读手持器”按钮或将用户的手持器打开点击“读手持器”按钮将用户信息读出。
在窗口的下方选择需要进行的维护操作。
“配置”：配置相关参数，通过软件对燃气表的使用状态进行监控。
“稽核”：将手持器写入稽核信息即归出厂状态。
“重写当前”：即重写当前数据，用于更换手持器或购气信息的写入。
孚恩M10安卓手持终端操作手册
M10 手持终端用户手册V1.0上海孚恩电子科技有限公司版权所有ShangHaiFineElectronics Co.,Ltd.AllRightReserved目录1.内容简介 (3)2.产品简介 (3)2.1.产品说明 (3)2.2.产品外观 (4)2.3.产品功能 (6)2.4.规格参数 (6)2.5.产品编号说明 (8)2.6.产品配置说明 (8)2.7.交付清单 (9)3.操作指南 (10)3.1.使用须知 (10)3.1.1.电池安装 (10)3.1.2.卡片安装 (13)3.1.3.充电 (15)3.1.4.按键布局图及说明 (16)3.1.5.开机 (17)3.1.6.关机 (17)3.1.7.挂起 (17)3.1.8.挂起唤醒 (17)3.2.电脑同步 (17)3.3.时间设置 (19)4.注意事项 (21)4.1.危险 (21)4.2.警告 (22)5.FAQs (22)1.内容简介M10手持终端是本公司推出的新一代产品，它采用高性能CPU和大容量的存储介质，可配置低中高频段无线射频模块，通过有线或无线进行数据通讯交互，使用Android操作系统，可满足各行业移动数据采集和简单数据处理的需求。
为了方便您的使用，本手册将详细地向您介绍M10手持终端和使用指南。
请在使用前认真阅读有关章节。
如果需要二次开发，可查阅SDK 文档和开发手册。
2.产品简介2.1.产品说明M10手持终端是本公司推出的新一代物联网多功能手持终端，它采用A9系列的CPU作为手持终端的控制中心，集成LCD显示屏、可充电电源管理、英文键盘输入、中文手写输入等功能，并将硬件驱动封装成API接口，二次开发接口和文档齐全，因而能很好地支持手持终端的应用程序，能很好地支持二次开发和远程升级，大大提高设备的便利性和应用扩展性。
本手持终端根据您选购的配置不同，设备可内置125Khz、13.56MHz、902~927Mhz、2.4GHz等无线射频识别模块，同时支持一维条码、二维条码、GPS定位等数据采集方式，能方便地自动采集各种数据；同时内置WIFI、蓝牙、GPRS、CDMA等无线传输模块，可方便地与车载终端、中央服务器进行即时数据传输与交换，具有高度可靠性和灵活便利性。
现场总线设备 手持终端 EX600-HT1A 使用说明书
文件No.EX※※-OML0010CN-C现场总线设备手持终端EX600-HT1A安全注意事项2型式表示・型号体系8产品各部分名称及功能8用语说明9安装・设置10安装前的准备10配线方法11设定・调整12基本操作12模式选择131. I/O monitor(I/O监视模式)152. Diagnosis Data(诊断数据确认模式)243. Sys. Configuration(系统动作设定模式)274. Parameter Setting(参数设定模式)335. Terminal Setting(终端设定模式)47故障一览表50设定参数52规格53外形尺寸图53安全注意事项此处所示的注意事项是为了确保您能安全正确地使用本产品，预先防止对您和他人造成危害和伤害而制定的。
这些注意事项，按照危害和损伤的大小及紧急程度分为“注意”“警告”“危险”三个等级。
无论哪个等级都是与安全相关的重要内容，所以除了遵守国际规格(ISO/IEC)、日本工业规格(JIS)*1)以及其他安全法规*2)外，这些内容也请务必遵守｡*1) ISO 4414: Pneumatic fluid power -- General rules relating to systemsISO 4413: Hydraulic fluid power -- General rules relating to systemsIEC 60204-1: Safety of machinery -- Electrical equipment of machines (Part 1: General requirements) ISO 10218: Manipulating industrial robots-SafetyJIS B 8370: 空气压系统通则JIS B 8361: 油压系统通则JIS B 9960-1: 机械类的安全性、机械的电气装置（第1部：一般要求事项)JIS B 8433: 产业用操作机器人-安全性等*2) 劳动安全卫生法等注意误操作时，有人员受伤的风险，以及物品破损的风险｡警告误操作时，有人员受到重大伤害甚至死亡的风险。
PT850手持终端采集器使用说明
采集终端使用说明1概述： (3)2使用说明： (3)2.1登陆： (3)2.2主菜单： (4)2.3核注入库： (4)2.3.1生产入库 (4)2.3.2退货入库 (6)2.3.3购买入库： (8)2.3.4调拨入库： (8)2.4核销出库 (8)2.4.1销售出库： (8)2.4.2退货出库： (9)2.4.3生产出库： (9)2.4.4残次品返工出库： (9)2.4.5调拨出库： (9)2.4.6销毁出库： (9)2.5库存盘点： (9)2.6药监码管理： (10)2.6.1药监码替换： (10)2.6.2药监码注销： (10)2.7关联关系管理 (11)2.7.1新建关联关系管理： (11)2.7.2重建关联关系： (12)2.7.3查验关联关系 (13)2.7.4注销关联关系： (14)2.8系统信息绑定采集 (15)2.9系统设置 (16)2.9.1附加功能绑定： (16)2.9.2系统时间设置 (17)2.9.3系统阀值设置 (17)2.9.4建立关联关系设置 (18)2.10数据传输 (18)2.11数据删除 (19)2.11.1入库批量删除 (19)2.11.2入库单个删除 (20)2.11.3出库批量删除 (20)2.11.4出库单个删除 (20)2.11.5全部数据清空 (20)2.11.6上游出库数据清空 (20)2.12已录数据查看 (21)3注意事项 (21)3.1电池 (21)3.2数据传输 (22)3.3数据线插拔 (22)1 概述：本项目用NLS-PT850便携式数据采集器完成对药监码的采集、管理等功能。
2 使用说明：2.1 登陆：开机后，屏幕出现登陆界面：如下图所示：此功能完成登陆操作，用户需要填写完整用户名、密码，选择企业类型后进入相应的功能主菜单。
按键说明：【数字键】：当焦点在用户名、密码输入框上时，按数字键输入相应信息。
【回删键】：当输入错误时，用户可以按此键删除错误的输入。
海能达PD68X数字手持终端使用说明书
DIGITAL PORTABLE RADIO数字手持终端OWNER’S MANUAL使用说明书Instructional IconsIndicates functions that are available on digital channel only.Indicates functions that are available on analog channel only.Functions marked with no function icons are available on both analog and digital channels.DisclaimerHytera Communications Corporation Limited (the Company) endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technology development. No part of this manual may be copied, modified, translated, or distributed in any manner without the express written permission of us.We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of the Third Party products and contents involved in this manual.If you have any suggestions or would like to learn more details, please visit our website at:.RF Radiation InformationThis product must be restricted to operations in an Occupational/Controlled RF exposure Environments. Users must be fully aware of the hazards of the exposure and able to exercise control over their RF exposure to qualify for the higher exposure limits.RF Radiation ProfileRadio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals are transmitted. RF technology is widely used in communication, medicine, food processing and other fields. It may generate radiation during use.RF Radiation SafetyIn order to ensure user health, experts from relevant industries including science, engineering, medicine and health work with international organizations to develop standards for safe exposure to RF radiation. These standards consist of:●United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J;●American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992;●Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999;●International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998.FCC RegulationsFederal Communication Commission (FCC) requires that all radio communication products should meet the requirements set forth in the above standards before they can be marketed in the U.S, and the manufacturer shall post a RF label on the product to inform users of operational instructions, so as to enhance their occupational health against exposure to RF energy.Operational Instructions and Training GuidelinesTo ensure optimal performance and compliance with the occupational/controlled environment RF energy exposure limits in the above standards and guidelines, users should transmit not more than 50% of the time and always adhere to the following procedures:●RF energy will be generated only when the radio is transmitting.●The radio must be 2.5 centimeters away from human body when transmitting.EU Regulatory ConformanceAs certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/ EC.Please note that the above information is applicable to EU countries only.ContentsItems in the Package ----------------------------------------1 Product Overview --------------------------------------------2 Product Controls ---------------------------------------------------2 Programmable Keys ----------------------------------------------3 Before Use ------------------------------------------------------3 Assembling the Radio --------------------------------------------3 Charging the Battery----------------------------------------------4 Checking the Battery Power ------------------------------------5 Status Indication ---------------------------------------------5 LCD Icon-------------------------------------------------------------5 LED Indicator -------------------------------------------------------6 Menu Navigation----------------------------------------------7 Basic Operations ---------------------------------------------8 Powering On/Off ---------------------------------------------------8Adjusting the Volume ---------------------------------------------8 Selecting a Zone ---------------------------------------------------8 Selecting a Channel -----------------------------------------------8 Inputting via Keypad ----------------------------------------------9 Locking and Unlocking the Keypad ---------------------------9 Managing the Contacts-------------------------------------------9 Call Services ---------------------------------------------------10Private Call ------------------------------------------------------10 Group Call -------------------------------------------------------11 Calling on Analog Channel (No Signaling) --------------11 Emergency Alarm -------------------------------------------------11Message Service -----------------------------------------12 Troubleshooting ----------------------------------------------13 Care and Cleaning -------------------------------------------14 Optional Accessories ---------------------------------------153To remove the battery, please turn off the radio first. Then slide the battery latch upwards to unlock the battery. Programmable KeysSK1to the corresponding Feature Book for feature details.Assembling the Radio 1. Assembling the Battery2. Assembling the Antenna”Assemble DisassembleNote4 3. Assembling the Belt Clip12Remove the screws Assemble the Belt ClipCharging the Battery Please use the charger specified by the Company, and follows thecharging steps as shown below.Read the Safety Information Booklet in advance to get necessary safety information. ●To achieve optimal battery performance, please charge the battery for at least 5 hours before initial use.Do not hold the radio by its antenna, otherwise the performance and lifespan of the antenna will be reduced.CautionChecking the Battery PowerYou may check the current battery power by holding down the programmed Battery Power Indicator key preset by your dealer. And release the key to exit. Battery power indications are listed below:DIconLED IndicatorD7Powering On/Off Adjusting the Volume Selecting a ZoneA zone is a group of channels exhibiting the same property, which is programmed by your dealer and can facilitate convenient management over the channel. The radio supports up to 3 zones, each with a maximum of 16 channels. You can switch to the appropriate zone by pressing the programmed Zone Up or Zone Down key preset by your dealer.Selecting a ChannelAfter the radio is powered on, you can rotate the Channel Selector knob to select an appropriate channel. You can also switch to the designated channel by pressing the programmed Preset Channel key preset by your dealer.If the Channel Notify feature is enabled, you will hear the corresponding channel number when switching to any channel.Selecting a Zone Selecting a Channel8Inputting via KeypadYou can input alias, call numbers and messages via the keypad of theradio. Besides, you may need to do the following during inputting.●●●Locking and Unlocking the KeypadWhen the keypad is not in use, you can lock the keypad to avoidmishandling. You can lock or unlock the keypad through any of thefollowing methods:●Key Combination: Press the OK●Programmable Key: Press the programmedby your dealer.●Menu Navigation: Go to “Settings -> Radio Settings -> Keypad Lock”to enable or disable the feature.»Enable: The keypad will be locked automatically if there is no radiooperation within the preset time. After this feature is enabled, youcan press the Up/Down key to set the Keypad Auto Lock DelayTime.»Disable: The keypad will not be locked automatically. However, youcan lock or unlock the keypad via the key combination or KeypadLock key mentioned above.configure other lockable keys or knobsManaging the ContactsYou can manage the contacts via the “Contact” menu.Contact ListThe Contact List is used to save Private Call/Group Call/All Call contactsinformation such as Call Alias, Call Type and Call ID. You can accessthe “Contact List” menu via the “Contact” menu or by pressing theprogrammed Contact List key.In the “Contact List” menu, you can check the contact information, editor delete the private contact. You can send to a private call contact thefollowing commands: Alert Call, Radio Check, Remote Monitor, RadioEnable or Radio Disable. Please refer to Feature Book for more details.New ContactYou can add and save a new contact to the contact list. The number andalias of each contact must be unique.Note10After the radio is powered on, you can make and receive calls. To ensure optimal volume of the receiving radio, keep the microphone about 2.5 toPrivate CallInitiating a Private CallWhen initiating a private call, the radio will display the icon . Youcan make a private call through the following ways:Preset ContactIn the home screen, hold down the PTT key to initiate a Private Call to the Private Call contact preset for the current channel.You may request your dealer to preset a regular Private Call contact, Group Call contact or an All Call contact for each digital channel.Contact List or Call Logs1. Go to “Menu -> Contact -> Contact List” or “Menu -> Call Logs -> Outgoing/Incoming/Missed”.2. Use the Up/Down key to select an appropriate contact.3. Hold down the PTT key to initiate a Private Call.Manual Dial1. Go to “Menu -> Contact -> Manual Dial”.2. Input a Private Call number via the numeric keypad.3. Hold down the PTT key to initiate a Private Call.●display the call type (private call ID/ group call ID).●If the Default Numeric Key Selection feature is enabled by your dealer, you can enter a private call number in the home screen, and then press the PTT key to transmit the call. However, if the DTMF keypad is enabled, the number entered in the home screen is a phone number. You can dial the private call number through the menu “Manual Dial” only.Note11Receiving and Responding to a Group CallAfter receiving a group call, the radio will display the icon . You canhold down the PTT key to call back within the preset time.Call on Analog Channel (No Signaling)On an analog channel, you can hold down the PTT key and talk to the microphone to transmit, and release the PTT key to receive.Please refer to the corresponding Feature Book for operation description on how to make and receive calls on the analog channel with signaling.Emergency CallIn case of emergency, you can use this feature to ask for help from your companion or the control center. The Emergency Call has the highest priority which can terminate the ongoing calls with lower priorities on the current channel. You can make an emergency call even when your radio is transmitting or receiving.This feature needs to be configured and enabled by your dealer. Please refer to the corresponding Feature Book for details.Receiving and Responding to a Private CallAfter receiving a private call, the radio will display the icon, thenyou can listen without any operation. You can hold down the PTT key to call back within the preset time. If you do not respond it, the radio will display appropriate indications.Group CallInitiating a Group CallWhen initiating a group call, the radio will display the icon. Youcan make a group call through the following ways. The operation is similar to initiating a private call.Preset ContactIn the home screen, hold down the PTT key to initiate a Group Call to the Group Call contact preset for the current channel.Contact List1. Go to “Menu -> Contact -> Contact List”.2. Use the Up/Down key to select an appropriate contact.3. Hold down the PTT key to initiate a Group Call.Manual DialThe operation is the same as initiating a private call.This feature allows you to edit and send a new message, to directly send a quick text message and to forward the messages in the Inbox, Outbox and Drafts.Sending a message1. Go to “Menu -> Message -> New Msg” to enter the relevant screen.2. Type the text and press the OK key. Save it to Drafts, or send it to aprivate call contact or a group call contact.3. Select the contact or input the contact number manually.4. Press the OK key to send the message. When the message is sentsuccessfully, the radio will display the prompt “Send Success!”.Quick TextQuick Text are frequently used messages preset by your dealer. You can choose to edit and send any entry.InboxThe radio saves the received messages into the Inbox and marks every message with a corresponding icon to indicate its status.● : Read message● : Unread messageWhen the Inbox is full, the radio will display theicon , and theearliest message will be overwritten by the latest one automatically. Outbox The radio will save the sent messages into the OutBox and marks every message with a corresponding icon to indicate its status.● : The message is sent successfully.● : The message is not sent successfully. In this case, you canresend it.When the Outbox is full, the earliest message will be overwritten by the latest one automatically.DraftsThe radio saves the edited messages into the Drafts. When the Drafts is full, the earliest message will be overwritten by the latest one automatically. After the message in the Drafts is sent successfully, it will be removed from the Drafts and be saved into the Outbox. If not sent successfully, the message will be saved into the Drafts and the Outbox.1214To guarantee optimal performance as well as a long service life of the product, please follow the tips below.Product CareKeep the product far away from substances that can corrode the circuit.Product Cleaning●Clean up the dust and fine particles on the product surface and charging piece with a clean and dry lint-free cloth or a brush regularly.●Use neutral cleanser and a non-woven fabric to clean the keys, control knobs and front case after long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or oil preparations, so as to avoid surface case damage.●Make sure the product is completely dry before use.Caution H M N O 4PC45 Programming Cable (USB Port)The following items are the main optional accessories for the radio. Formore information of other accessories, please consult your local dealer.Use the accessories specified by Hytera only. If not, theCompany shall not be liable for any losses or damagesarising out of use of unauthorized accessories.CautionBL2010 2000mAh Li-Ion battery,MCA08 MCU Multi-unit Charger (for ThickBattery),CH10A06 Dual Pocket MCU Charger Kit (forLi-ion/Ni-MH Batteries),PS7501 Switching Power Adapter for MCUMulti-unit Rapid-rate Charger,MCA05 Battery Optimizing SystemEAN21 3-wire Surveillance Earpiece with TransparentAcoustic Tube(Beige),ESN14 Remote Earbud,EHN20 Remote Swivel Earset,EHN21 Remote C-Earset,EAN22 Detachable Earpiece with Transparent AcousticNCN011 Nylon Carrying Case (half-folded)(non-swivel) (black)SM26N2 Waterproof Remote Speaker Microphone(IP54),EAN24 2-wire Surveillance Earpiece with TransparentAcoustic Tube (Beige),EWN08 Digital Wireless Covert Earpiece (FlatpackSensor)图标说明：表示数字信道独有的功能，只能在数字信道上使用。
全国邮政速递手持终端应用系统使用手册
全国邮政速递手持终端应用系统版本号：使用手册建方信息技术有限公司2007年07月目录第一章手持终端应用系统( 使用说明 (3)第一节投递处理使用说明 (3)一、系统登录 (3)二、投递处理 (4)第二节揽收处理使用说明 (17)一、系统登录 (17)二、揽收处理 (18)第三节无线数据传输功能说明 (28)一、无线上传邮件功能 (28)二、无线跟踪查询邮件功能 (30)三、版本验证（有线验证、无线验证） (32)四、无线同步时间 (33)第四节系统设置说明 (34)一、修改密码 (34)二、屏幕校准 (35)三、本机参数设置 (35)一、设备日常维护注意事项 (37)二、系统应用注意事项 (37)三、数据传输注意事项 (38)四、故障设备报修 (39)附录一MC1000拼音输入法及笔画输入法说明 (40)附录二MC70激活无线连接方法说明 (45)第一章 手持终端应用系统( 使用说明第一节 投递处理使用说明一、 系统登录手持终端设备启动后会首先出现EMS 手持终端收寄投递系统登录主界面如下：（图1-1 EMS 手持终端收寄投递系统登录主界面）● 登录类型：系统提供两种登录类型：揽收或投递。
默认登录类型为“揽收”。
此时您需要点击【下箭头键】将登录类型变更为“投递”，并点击【回车键】确认，之后光标进入下一输入框。
● 登录工号：请输入登录工号，并点击【回车键】确认。
● 姓名：此栏不需要手工输入，系统会根据您的登录工号自动显示相对应的投递员姓名。
● 登录密码：技巧：您也可以在此输入框为空时直接点击【回车键】，系统会自动弹出与本机绑定的所有投递员工工号列表，您可以直接从此列表中选择适当的用户名进行登陆。
键盘输入状态提示符。
“1”为数字输入；“A ”为字母输入；“1F ”或“AF ”为Fn 输入。
电量显示。
当连接电源时显示为“AC ”。
系统时间日期显示请在此栏中输入正确的登录密码，之后点击【回车键】即完成登录并进入下一级界面（图1-2）。
EXcon VEX4000手持终端产品说明书
EXcon handheld terminalMenus and alarmsVEX4000Original instructions3005263-2015-08-20EXcon Handheld terminal EXHAUSTO A/SOdensevej 76DK-5550 Langeskov Tel.: +45 65 66 12 34Fax: +45 65 66 11 10********************www.exhausto.dk1.The handheld terminal1.1.Operation (4)1.1.1.Operation and functions (4)1.1.2.Operating levels (5)1.2.Passwords (5)er modeer menu (6)2.1.1.Fan operation (7)2.1.2.Extended operation (8)2.1.3.Temperature (8)2.1.4.Time and date (9)2.1.5.Alarm log (9)2.1.6.About the control system (9)2.1.7.Internet (10)3.Installer level3.1.Installer menu (11)3.1.1.Fan operation (12)3.1.2.Temperature (15)3.1.3.Initial adjustment (17)3.1.4.Fire (18)munication (19)nguage (19)3.1.7.Factory setting (20)3.1.8.Store functions (21)4.Service level4.1.Service menu (24)4.1.1.Fan (25)4.1.2. Filter (28)4.1.3.Heating (30)4.1.4.Heating recovery (35)4.1.5.Cooling (38)4.1.6.Damper (42)4.1.7.Temperature sensor correction (44)4.1.8.Pressure transmitter (45)5.Alarm summaryAlarm list manual terminal (46)2/52Symbols and termsProhibition symbol Failure to observe instructions marked with a prohibition symbolmay result in serious or fatal injury.Danger symbol Failure to observe instructions marked with a danger symbol mayresult in personal injury and/or damage to the unit.Terms These instructions use the following terms for air flows as given in DS447-2013:●Supply air●Extract air●Outdoor air●Exhaust air●RecirculationScreen displays These guidelines contain screen displays intended to the help the user and indicate which menu the user is currently viewing.NB:The order of screen displays/menus depends on the VEX units settings. Therefore there may be discrepancies between the order of screen displays in the guidelinesand in the VEX unit's handheld terminal.Software versionSoftware versionThese instructions are for use with the following version:●EXcon Master SW: 3.19●Handheld terminal SW: 1.04The current software version for both the EXcon Master and the handheld terminal canbe seen in the menu: User > On control of the handheld terminal.3/521. The handheld terminal1.1 OperationFunctional descrip-tionReading, programming and control can be performed from the handheld terminal. Theterminal has a graphic display, a button with PRESS and TURN function, a "?" (help)-button and an "Esc” button.The handheld terminal menu and settings are structured to correspond to the menuand settings found in the EXcon control system’s web server. The functionality, set-tings, etc. of the EXcon control system are described in the EXcon instructions. Handheld terminalA Graphic displayB Light diode: Green LED which lightsup when voltage on the handheldterminal is OK.C Light diode: Red LED which flashesin the event of an alarm from theunit or the system alarms.D PRESS buttonE TURN buttonF? buttonG ESC button1.1.1 Operation and functionsTURN function The TURN function is used to switch between menus and for setting values.Turn to the right > next menu/increase valueTurn to the left > previous menu/decrease valuePRESS function The PRESS function is used to enter the menu.✠ One press > confirm and next value✠✠ Two presses > confirm and previous valueESC button The ESC button is used to exit a menu.4/52button Press the ? button to bring up help text on the display.Changing the set value The hatched field indicates the active value, which can be changed by turning the turn button. Press the press button to confirm the selected choice. Press the ESC button to exit a menu. The following describes a programming sequence.NB! If the buttons on the handheld terminal are not activated in 30 minutes, the unit automatically logs out to user level.1.1.2 Operating levelsThe menus in the hand terminal are divided into three operating levels:●User level - free access●Technician/Installation engineer level - requires password●Service level - requires password1.2 PasswordsLogin at a higher level also gives access to the underlying levels. Handheld terminalIt is not possible to change password on the terminal.5/522. User mode2.1 User menuThe user level menu gives access to operating times, temperature setpoint, clock,alarms, software version and IP address.No password is required for user level.6/522.1.1 Fan operationSubmenu Submenu7/522.1.2 Extended operationSubmenu Any comments2.1.3 TemperatureSubmenu Any comments*Shown ifpoint offset.8/522.1.4 Time and dateSubmenu Any comments2.1.5 Alarm logSubmenu Any comments2.1.6 About the control systemSubmenu Any comments9/522.1.7 InternetSubmenu Any comments10/523. Installer level3.1 Installer menuThe menu at installer level gives access to selections and settings for regulationtypes and integral functions.Password The password for the installer level must be set to allow access to underlying menus.●Code 1111Failure to observe instructions marked with a danger symbol mayresult in personal injury and/or damage to the unit.3.1.1 Fan operationSubmenu Any comments3.1.2 TemperatureSubmenu Any commentsShown if Outdoor airtemperature (externalShown only when room operation is installed.Symbols which are only shown when Summer/WinterShown only when the unit is in summer operation.Shown only when the unit is in winter operation.Set temperature setpoint●3.1.3 Initial adjustmentSubmenu Any comments3.1.4 FireSubmenu Any commentsNB:The selected fans mode must meet regulatory standards.3.1.5 CommunicationSubmenu Any comments 3.1.6 LanguageSubmenu Any comments3.1.7 Factory settingSubmenu Any comments3.1.8 Store functionsSubmenu Submenu4. Service level4.1 Service menuThe service level menu gives access to the operating values, settings and forcedoperation of the unit's components.Password The password must be set to allow access to underlying menus. The password gives automatic access to installer level.●Code 1112Failure to observe instructions marked with a danger symbol mayresult in personal injury and/or damage to the unit.4.1.1 FanSubmenu Any commentsSymbol is shown when an alarm from the frequencyconverter is triggered.Forced control of supply air fan and setting of K fac-Symbol is shown when an alarm from the frequencyconverter is triggered.Extract air fan operating statusSymbol is shown when an alarm from the frequencyconverter is triggered.Symbol is shown when an alarm from the frequency converter is triggered.Setting of delayed fan start4.1.2 FilterSubmenu Any commentsSymbol is shown when a filter alarm is triggered.* Shown only in the event of a dynamic filter alarmSymbol is shown when a filter alarm is triggered.* Shown only in the event of a dynamic filter alarm4.1.3 HeatingSubmenu Any commentsSymbol is shown when an alarm from the heat inter-face is triggered.Symbol is shown when an alarm from the heat inter-face is triggered.Water heating coil4.1.4 Heating recoverySubmenu Submenu/Any com-ments Crossflow heat exchangerRotary heat exchanger4.1.5 CoolingSubmenu Any commentsWater coolingExternal DX Cooling4.1.6 DamperSubmenu Any comments Outdoor air damperRecirculation damper Smoke-evacuation damper4.1.7 Temperature sensor correctionSubmenu Any commentsShown if heating coil1 is configured4.1.8 Pressure transmitterSubmenu Submenu5. Alarm summary Alarm list manual terminal Alarm list EXcon SW version 3.13。
MC32N0手持终端使用说明
MC32N0手持终端使用说明一．常用快捷方式1.PDA死机后，热启动快捷方式：长按红色电源键5秒以上。
PDA开始执行热启动时，松开电源按钮。
2.PDA死机后，冷启动快捷方式：按住数字1和9不放，再按红色电源键。
3.屏幕重新校验快捷方式：FUNC+ESC键；在检验屏幕中不想进行校验，按esc键取消即可。
4.PDA发送程序快捷方式到桌面的步骤：a.双击桌面“我的设备”→双击“Application”磁盘→双击新建的“WXWS_PDA”文件夹（根据实际情况新建文件夹）→单击选中“WXWS_PDA"程序；b.打开菜单栏“文件”→“发送到”→“桌面快捷方式”。
二.连接网络步骤1.桌面右下角的网络图标显示下图1所示图标灰色打叉，即wifi功能未打开。
图12.点击该图标出现图2所示界面，点击“启用无线电”即可。
图23.点击图3中第二个配置项“管理配置文件”设置wifi的热点及密码。
图34.在弹出界面图4所示根据实际情况选择对应的wifi热点，长按该热点2秒以上弹出菜单界面，点击“创建配置文件”。
图45.配置热点有9到10个步骤，每个步骤都有一张截图，截图中没有说明即默认接着点击下一步即可。
6.有时显示已经成功连上wifi，但实际就是连不上网络，此时可以通过如下步骤进行设置下（如果wifi 可以正常访问网络就忽略该步骤）。
7.该步骤是实现冷启动后wifi配置不丢失的功能，一劳永逸。
三.打开DataWedge扫码程序步骤四．把项目PDA程序拷贝到设备中1.设备冷启动后，application磁盘下的文件不会丢失，所以需将项目PDA程序拷贝到该磁盘下。
2.设备需要通过底座及数据线连到电脑上，安装Windows Mobile设备中心驱动。
3.设备连接成功的标志是在电脑里能看到如下Compact的磁盘图标（类似U盘图标）4.在application目录下根据实际情况新建一个文件夹，比如这里新建了一个“WXWS_PDA”的文件夹5.将项目PDA程序文件从电脑上拷贝到上述新建的文件夹中6.发送pda程序快捷方式到桌面。
手持移动终端PDA使用手册
手持终端CK3X 用户使用手册
1、键盘与LED 说明
键盘上端的状态指示灯:
1左边灯亮湖泊色提示用户系统收到新消
息
2中间灯亮蓝色表示系统处于准备工作状
态
3中间灯亮红色表示解码发错误
4右边灯指示电池状态
1）放在通讯座上充电时，红色表示正在
充电
2）没有放在通讯座上充电时，红色表示
电池电量小于20%
3）没有放在通讯座上充电时，闪烁红色
表示需要更换电池
4）放在通讯座上充电时，绿色表示充电
完成
5）放在通讯座上时，琥珀色表示没有装
入电池
6）放在通讯座上充电式，琥珀色和红色
交替闪烁，表示电池出错，可能在0°C-45°C 之外充电或电池失效。
屏幕图示：
关闭声音状态。
点击可以设置其状态
计算机已连接到网络中
计算机没连接到网络中
已连接到802.11b/g 协议的无线网络中
通过USB 口已连接到PC 中
点击它可以设置网络参数
2、CK3输入法
键盘组合键输入法：。
手持机操作手册
手持机操作步骤——超级管理员一：初次使用1：设置超级管理员（注：工号固定为9999，不能使用其他工号）。
2：设置密码（注：密码长度为6位数字，前两位不允许同时为0不允许递增或递减方式设定，例：123456或654321，不允许使用同号，例：111111）。
3：设置姓名：不能超过四个汉字（输入法切换按手持机左下角的C*键）。
4：以上步骤每完成一步，按手持机右下角的Enter键进行确认并进行下一步骤，F3键的功能是表示退格（相当于删除的功能）。
5：设置日期和时间：设置成当前的时间（注：如果设置不正确，以后交接时会出错）。
6：设置管理员个数。
7：设置各箱子种类采用默认配置即可。
8：设置完毕后按F1保存。
二：设置管理员1：用超级管理员的工号和密码进入以后，在<终端管理>状态下按Enter键进入设置界面，用手持机左边的滑轮进行选择，选择<终端管理>按Enter后再选择<员工管理>按Enter键到<增加员工>按Enter键到<添加管理员>按Enter键到<设置管理员>进行添加管理员，方法与设置超级管理员相同，工号从1001~1999，按顺序设置，工号一经设置，不可重复使用！密码设置与超级管理员密码设置是一致。
2：设置完管理员后，按Enter键进行保存！3：超级管理员只能添加管理员，不能进行网点员（员工）的添加/删除。
三：修改密码1：用超级管理员的工号和密码进入以后，在<终端管理>状态下按Enter键进入设置界面，用手持机左边的滑轮进行选择，选择<员工管理>按Enter键到<更改密码>按Enter键到<修改管理员密码>按Enter键到<工号：9999>进行密码的修改！2：注：修改密码这项功能只能由手持机内的用户，并在本人登陆以后才能进行修改，他人不能进行修改密码！四：操作删除（员工删除）1：用超级管理员的工号和密码进入以后，在<终端管理>状态下按Enter键进入设置界面，用手持机左边的滑轮进行选择，选择<员工管理>按Enter键到<操作删除>按Enter键到<删除管理员>按Enter键到<删除一个管理员>进行管理员的删除。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
手持终端操作说明操作说明书中关村工信二维码技术研究院2013年12月1日目录一.产品介绍 (3)二.操作流程 (3)2.1登录流程 (3)2.2连接蓝牙打印机 (4)2.3上班 (5)单路段上班 (5)多路段上班 (5)2.4交易 (7)车辆进场-1 (7)车辆进场-2 (10)车辆离场 (10)未缴费 (13)2.5打印 (15)2.6逃费补交 (15)2.7信息查询 (16)2.8系统设置 (19)2.9关于 (22)三.故障排除 (23)手持终端使用说明书一·产品介绍产品外观图如下：二·操作流程2·1登录流程开机后系统自动进入登录界面（图1-1），等待网络连接成功后点击登录，登录时后台服务器会将交班信息下载更新到POS机中，参数有变动时系统会自动下载并更新参数，联机登录完成后会提示登录成功（图1-2）。
2-1登录界面2-2 登录成功2·2连接蓝牙打印机登录完成后，如果蓝牙打印机没有绑定(图2-3)，根据提示点确定先绑定蓝牙mac，选择可用设备，输入pin密码0000，完成绑定。
绑定完成后返回自动连接蓝牙打印机。
如果打印机已绑定，则开机自动连接。
进入主界面。
2-3 2-42·3上班单路段上班收费员在签退状态下点击“上班”图标，进入系统主菜单界面（图2-5），打印机打印签到凭据（图2-6）。
（注：上班成功后，才能使用停车收费、逃费补交、信息查询、打印等相关功能，并且图标会由灰色不可点击变成彩色可点击的状态）2-5 2-6多路段上班点击上班，可以选择相应的路段上班（图2-7），实现收费员轮岗操作。
2-7占道停车上班凭证执收单位：停车收费管理中心终端序列号：2A002757终端号：00000015工号：PB0020 ：XXX批次号：000001 流水号：000003收费路段：国际大厦日期时间：2013/07/26 12:00交班预收款：￥30.00车位序号车位唯一号车牌01 00000577 冀A1234502 00000578 冀A1234603 00000579 冀A1234704 00000580 冀A1234805 00000581 冀A1234906 00000582 冀A12340签到凭据说明：收费员完成上班操作后，POS机自动连接管理平台下载上一班没有离场的车辆信息，包括车辆停放的泊位、车牌号等信息、上一班预收。
打印凭据上的时间为收费员上班的时间，可做为考勤依据。
收费员依据凭据上的车位信息核对车辆实际占位情况，将不在泊位的车辆做离场未缴费处理。
2·4交易车辆进场-1在POS机操作主界面点击“停车收费”图标进入车位界面（图2-9）点击编号的泊位输入车牌号（图2-10），选择车辆所属地（图2-11）系统自动切换到城市字母界面（图2-12）选择字母后系统自动切换到车牌号界面（图2-13）输入车牌号选择车型后点击“进场”（图2-14），打印小票（图2-15），完成车辆进场。
2-9车位界面（注：显示当前上班的停车场一共有多少个停车位，如果车位已经被占用，将会显示车牌号码）2-10 2-11 2-122-13 2-14拍照识别点击“车牌识别”对准车牌点击屏幕下方按钮，拍照完成后系统自动识别车牌。
取证拍照点击“取证拍照”，关联车牌号和周边景色作为拍摄证据。
取证补拍当收费员来不急操作取证拍照时，可以先进行进场操作，操作完成后到停车界面选择对应进场的车辆进行取证补拍，拍照完成后，按钮由灰色变成绿色。
2-16车辆进场-2完成2-14操作后点击进场，先查询进场车辆是否有逃费记录，提示进场前是否补交2-16欠费车辆进场注：欠费车辆进场时，系统会提示该车辆所欠停车费用。
收费员可以要求车主补交停车费后再进场。
车辆离场现金支付当车辆离开时，在POS机收费界面点击需要离场的车牌号进入离场界面（图2-17），点击“现金”离场成功（图2-18）并打印小票（图2-19）完成离场操作。
2-17离场界面占道停车出场凭证收费单位：停车收费管理中心批次号：000001 流水号：000003收费员工号：PB0020 泊位号：00000005/02收费路段：国际大厦车牌号：冀A12345（小型车）车辆到达时间：2013/07/26 22：17车辆离开时间：2013/07/26 22：18停车时长：1分停车费用：￥0.00实收金额：￥0.00逃费金额：￥0.00支付方式：现金声明：本停车收费属于占道停车泊位费用，不承担车辆被盗、损、刮碰及车内物品管理等责任，请顺向停放在泊位线内。
**车辆出场存根**4.2银联卡支付当车辆需要离开场，在POS机泊位界面点击需要离场的车牌号进入离场界面（图2-20），点击“一卡通”后系统提示是否使用一卡通进行支付（图2-21），点击“确定”（图2-22）界面为（图2-23）时将一卡通放在打印机感应区，扣费成功后打印离场凭证（图2-24）。
离场凭证上支付方式将显示“一卡通”。
如未能完成付款（余额不足、卡损坏等），POS机显示“付款失败”，按确认键返回改用其它支付方式。
2-21离场界面2-22提示2-23刷卡支付未缴费如车辆未交费离场时，“未付费”或“拒付费”后系统提示（图2-25，2-26），点击“确定”（图2-27），手持终端将按当前默认金额记录该笔收费，收费凭证上支付方式将显示“未付费”或“拒交费”，逃逸金额显示该车未缴费金额（图2-28）。
占道停车出场凭证执收单位：停车收费管理中心批次号：000001 流水号：000003收费员工号：PB0020 泊位号：00000005/02收费路段：国际大厦车牌号：冀A12345车辆到达时间：2013/07/26 22：17车辆离开时间：2013/07/26 22：18停车时长：241分停车费用：￥11.00实收金额：￥10.00逃逸金额：￥1.00支付方式：未付费声明：本停车收费属于占道停车泊位费用，不承担车辆被盗、损、刮碰及车内物品管理等责任，请顺向停放在泊位线内。
**车辆出场存根**占道停车出场凭证执收单位：停车收费管理中心批次号：000001 流水号：000003收费员工号：PB0020 泊位号：00000005/02收费路段：国际大厦车牌号：冀A12345车辆到达时间：2013/07/26 22：17车辆离开时间：2013/07/26 22：18停车时长：241分停车费用：￥11.00实收金额：￥10.00逃逸金额：￥1.00支付方式：拒付费声明：本停车收费属于占道停车泊位费用，不承担车辆被盗、损、刮碰及车内物品管理等责任，请顺向停放在泊位线内。
**车辆出场存根**注：未付费，不属于恶意的逃费。
拒付费，属于恶意逃费。
2·5打印选择该功能项将重新打印上一笔交易。
2·6逃费补交在主功能菜单界面下，点击：“逃费补交”输入要查询车辆的车牌号（图2-29），再点击“确认”图标开始查询（图2-30），没有逃逸记录（图2-31），如有逃费记录（图2-32），点击“补交”后再点击“确定”打印小票，完成逃逸补交（图2-33）。
2-29输入车牌号2-30点击确定2-31无逃逸记录占路停车补交凭证执收单位：停车收费管理中心收费路段：国际大厦车牌号：冀A13338补交时间：2013/07/26 22:59停车时长：250小时欠费金额：￥165.00补交金额：￥165.00**车辆欠费存根**2·7信息查询在“查询”功能项，按对应的数字键选择相应的功能项（图2-34）2-34查询信息当日收费清单点击图标输入密码782377，进入当日收费清单界面（图2-35），点击“打印”打印当日收费清单（图2-36），按返回键返回。
2-35当日收费清单占道停车收费清单执收单位：停车收费管理中心工号PB0020 ：XXX收费路段：国际大厦上班时间：2013/07/26 22：13交班预收款：￥00.00现金：￥00.00未交费：￥165.00通知公告该界面显示通知公告内容（图2-37），内容由管理系统自动下发。
按返回键返回。
2-37通知公告网络状态该功能项显示POS机的网络状态（图2-38）2-38网络状态一卡通余额该功能项为查询一卡通卡余额情况。
点击“一卡通余额”后按提示（图2-39）将银联卡靠近感应区域，系统显示该卡余额。
2-39提示2·8系统设置该界面为设置POS机系统参数，只有系统管理人员才能应用，进入需要输入密码782377（图2-42），进入后可查看、修改手持终端相应参数设置。
2-42系统设置下载系统参数选择该功能项将自动连接网络更新下载并打印参数，方便管理人员核对系统参数。
通讯参数设置进入通讯参数设置界面修改参数并保存（图2-43）。
2-43修改保存终端参数设置进入终端参数设置界面修改并保存（图2-44）。
2-44修改保存参数打印点击后直接打印参数。
修改密码点击后（图2-45）直接进入修改密码界面。
2-45修改密码系统设置点击后进入POS机设置界面（图2-46）。
2-46设置2·9关于点击“关于”图标后进入系统版本界面（图2-47），可以检查更新新版本。
系统更新分为手动更新和自动更新手动更新：系统会有更新提示，自己手动确定更新。
自动更新：部分参数系统会自动强制更新。
注：当系统有新版本时，POS开机会自动更新为最新版本。
2-47系统版本三·故障排除（1）网络连接错误开机登录时显示网络错误，检查网络是否连接上，当网络标志上显示E的字样，说明此时网络已经连接上，可以进行交易。
（2）蓝牙连接断开请按操作步骤先开启蓝牙打印机，然后开启手持终端，蓝牙会自动连接。
如果在使用中出现蓝牙断开，请技术人员先检查蓝牙是否绑定，完成绑定后，重启蓝牙打印机进行连接。
（3）车牌识别车牌识别需要正确的拍摄角度，请收费员站在离车大约一米处，正拍车牌，拍摄时尽量不要晃动手持终端。
（4）车辆离场如出现车辆不能离场，先在操作一次离场，确定不能离场后，进行下班操作，然后在上班。
（5）取证补拍未拍照时，取证补拍按钮是灰色的，完成拍摄后，取证补拍按钮为绿色。
（6）换纸操作打印机需要换纸时，只需打开放纸后盖，按正确的放纸方式放入打印纸，关闭后盖即可。
（7）打印机自动关机请观察打印机电池信号灯的颜色是否为绿色，如果不为绿色，说明电池电量不足，请充电。