Castrol 嘉实多主要产品汇总介绍说明

Semi-synthetic gear oils with TGOA
Mineral oil/PAO
Optigear Synthetic A
Synthetic gear oils
PAO
with MFT
Optigear Synthetic X
Synthetic gear oils
PAO
Optigear RMO Tribol 800
Optileb GT Tribol FoodProof 1800
Physiologically safe hydraulic oils
Physiologically safe gear oils
Physiologically safe gear oils
PAO
PAO Polyglycol
Optileb V Viscoleb
Tribol BioTop 1418
Gear oils
Ester
ANTI-WEAR ADDITIVES
ISO VG (VISCOSITY/
40 °C)
TEMPERATURE APPLICATION
Synthetic High Performance and longlife gear oil
Synthetic gear oils
Hydraulic and Circulating Oils
Hyspin AWS
Hydrቤተ መጻሕፍቲ ባይዱulic oils
Hyspin SP
Hydraulic oils
PAO Polyglycol
Chain lubrication of furnaces (operating temperature up to +250 °C). Extremely low surface tension allows extreme deep penetration also at points with tight gaps.
-30 +100
-30
+95
-30 +125
-20
+90
-20
+90
-15
+90
-10 +220* -35 +220* -50 +240*
-40
+90
-20 +120 -40 +200 -30 +240
-25 +180 -20 +130 -40 +250
-25 +200
APPLICATION
Spur and bevel gear units, even under severe operating conditions, rolling bearings, gear couplings, drive units of rail vehicles
Optileb PR
Thin-bodied white oil
White oil
Optileb DAB 8
Medicinal white oil
med. white oil Paraff. Subliqu.
Optileb TC 5
Physiologically safe
PAO
special oil
Optileb HY
MoS2 EP/AW EP/AW EP/AW
EP/AW EP/AW EP/AW
EP/AW
22 100 32 – 4000 150
220*** 130
210, 280
115, 220
TEMPERATURE APPLICATION
RANGE °C
-15
+90
-10
+90
-20
+90
-30
+95
-30
+95
Synthetic compressor oils
Chain Oils
Molub-Alloy CO 22
Chain oil with solid lubricants
Mineral oil
Mineral oil Ester PAO
Mineral oil
Tribol 1730 Viscogen KL Tribol 1430
Mineral oil Mineral oil
Tribol 943 AW
Hydraulic and circulating oils
Compressor Oils
Aircol PD
Mineral compressor oil
Tribol 890
Synthetic compressor oils
Tribol 1555
DESCRIPTION
BASE OIL
Mineral gear oils with MFT Mineral gear oils with MFT
Mineral oil Mineral oil
Tribol 1100
Mineral gear oils with TGOA
Mineral oil
Tribol 1710
Modern worm and spur gear units, medium to high loads, rolling and sliding bearings, peak temperature up to +160 °C
Hydraulic oils HLP according to DIN 51524.2, containing heavy metals
Chains, joint bolts, open lubricating points especially in the wet section
Chains in painting and drying installations (maximum temperature briefly +160 °C)
HIGH PERFORMANCE LUBRICANTS
MAJOR PRODUCTS
YOUR ADVANTAGE IN AN INDUSTRIAL WORLD
HIGH PERFORMANCE LUBRICATING OILS
PRODUCT NAME
Gear Oils
Optigear
Optigear BM
Spur, bevel and planetary gearing, main gearing of wind power plants and oillubricated rolling bearings.
Spur and bevel gearings also subject to harsh conditions, longlife gear oil rolling bearings, denture clutches, drives of rail-borne vehicles
Cathodic paint immersing installations evenly distributes in water or watersoluble paints.
Notes: MFT = MICROFLUX TRANS, the load-active additive combination TGOA = Tribol Grease and Oil Additive, the load-active additive combination EP = Extreme Pressure • AW = Anti-Wear • PAO = Polyalphaolefin PTFE = Polytetrafluorethylene • PFPE = Polyfluorpolyether
68 – 1500
TGOA
100 – 460
MFT MFT II MFT EP/AW
100, 220, 320 100 – 680 150 100 – 1500
EP/AW EP/AW EP/AW
10 – 150 5 – 100 22 – 68
EP/AW AW AW
32 – 150 32, 68, 100 32 – 100
All compressor types, also at high compression temperatures (up to +220 °C)
All types of compressors, even at high compression temperatures (up to +220 °C)
Physiologically safe
PAO
compressor oils
Physiologically safe
PAO
chain oils
Tribol FoodProof 1835
Physiologically safe chain
PAO
and circulating oils
Biodegradable Oils
Modern spur gear units, medium to high loads, rolling and sliding bearings, circulating PAO systems, oil sump temperature up to +95 °C
Industrial gears operating at wide temperature fluctuations and under high loads, sliding and rolling bearings
Chain oil High-temperature chain oils High-temperature chain oil
Mineral oil/Ester Ester Ester
Optimol SHF Tribol 1330 Viscogen KLK 25, 28
Chain oil Chain oil High-temperature chain oils
Screw-type and sliding vane compressors, good seal compatibility
Drive chains subjected to medium speed and temperatures, dusty environments, wire ropes: core and outer surfaces
Spur and bevel gear units, even under severe operating conditions, worm gear units, rolling and sliding bearings, gear couplings, circulating systems
Modern spur and worm gear units, medium to high loads, rolling and sliding bearings, circulating systems, oil sump temperature up to +90 °C
Conveyor and drive chains, low to medium temperatures and loads
Chain lubrication in the normal and high-temperature range
Transport chains at extremely high temperatures (long-term temperature above +240 °C, peak temperature up to +280 °C), compatible with paints
Polymer Polyglycol
Ester
Optifluid KTL 100, 220
High-temperature chain oils
Polyglycol
ANTI-WEAR ADDITIVES
ISO VG (VISCOSITY/
40 °C)
MFT
32 – 460
MFT
68 – 1500
TGOA
* Final compression temperature ** Dry lubrication *** Contains solvent
HIGH PERFORMANCE LUBRICATING OILS
PRODUCT NAME
DESCRIPTION
BASE OIL
Oils for the Food and Beverage Industry
Exceeds HLP according to DIN 51524.2, hydraulic systems and hydraulic drives, heavy metal free
Hydraulic systems in modern NC machines, also for screw compressors