CC1100配置寄存器(解释)
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
INT8U FSCTRL2; //自已加的
INT8U FSCTRL1; // Frequency synthesizer control.
INT8U FSCTRL0; // Frequency synthesizer control.
INT8U FREQ2; // Frequency control word, high INT8U.
INT8U FREQ1; // Frequency control word, middle INT8U.
INT8U FREQ0; // Frequency control word, low INT8U.
INT8U MDMCFG4; // Modem configuration.
INT8U MDMCFG3; // Modem configuration.
INT8U MDMCFG2; // Modem configuration.
INT8U MDMCFG1; // Modem configuration.
INT8U MDMCFG0; // Modem configuration.
INT8U CHANNR; // Channel number.
INT8U DEVIATN; // Modem deviation setting (when FSK modulation is enabled).
INT8U FREND1; // Front end RX configuration.
INT8U FREND0; // Front end RX configuration.
INT8U MCSM0; // Main Radio Control State Machine configuration.
INT8U FOCCFG; // Frequency Offset Compensation Configuration.
INT8U BSCFG; // Bit synchronization Configuration.
INT8U AGCCTRL2; // AGC control.
INT8U AGCCTRL1; // AGC control.
INT8U AGCCTRL0; // AGC control.
INT8U FSCAL3; // Frequency synthesizer calibration.
INT8U FSCAL2; // Frequency synthesizer calibration.
INT8U FSCAL1; // Frequency synthesizer calibration.
INT8U FSCAL0; // Frequency synthesizer calibration.
0x00,
0x08, // FSCTRL1 Frequency synthesizer control. 频率合成器控制
0x00, // FSCTRL0 Frequency synthesizer control. 频率合成器控制
0x10, // FREQ2 Frequency control word, high byte. //频率控制词汇，高字节
0xA7, // FREQ1 Frequency control word, middle byte.//频率控制词汇，中间字节0x62, // FREQ0 Frequency control word, low byte. //频率控制词汇，低字节0x5B, // MDMCFG4 Modem configuration. 调制器配置
0xF8, // MDMCFG3 Modem configuration. 调制器配置
0x03, // MDMCFG2 Modem configuration. 调制器配置
0x22, // MDMCFG1 Modem configuration. 调制器配置
0xF8, // MDMCFG0 Modem configuration. 调制器配置
0x00, // CHANNR Channel number. 信道数
0x47, // DEVIATN Modem deviation setting (when FSK modulation is enabled).
// 调制解调器偏差设置（FSK调制时启用）。
0xB6, // FREND1 Front end RX configuration. //前末端RX配置。
0x10, // FREND0 Front end RX configuration. //
0x18, // MCSM0 Main Radio Control State Machine configuration.//主要无线电控制状态机的配置。
0x1D, // FOCCFG/ Frequency Offset Compensation Configuration. //频偏补偿配置0x1C, // BSCFG Bit synchronization Configuration. //位同步配置。
0xC7, // AGCCTRL2 AGC control. AGC控制。
0x00, // AGCCTRL1 AGC control. AGC控制。
0xB2, // AGCCTRL0 AGC control. AGC控制。
0xEA, // FSCAL3 Frequency synthesizer calibration.频率合成器校准
0x2A, // FSCAL2 Frequency synthesizer calibration.频率合成器校准
0x00, // FSCAL1 Frequency synthesizer calibration.频率合成器校准
0x11, // FSCAL0 Frequency synthesizer calibration.频率合成器校准