GPS使用说明书
GPS汽车轨迹器用户手册说明书
GPS Vehicle TrackerUser ManualFor Car,Motorcycle,Truck,Bus etcPlease read the manual carefully before use,so that you can install the device correctly and activate it quickly on the internet.The outlook and true color are subject to the actual product.Web server platform:/Skins/DefaultIndex/Default_en.html?locale=en&back=true Demo account:gwxyPassword:1234561．Accessories：2.Technical parameter1）.GSM：850/900/1800/1900Quad band 2）.GPRS:Class12,TCP/IP3）.Working Voltage：9-90V DC4）.Working current：≈22mA(12vDC) 5）.Working current：≈12mA(24vDC)6）.GPS locating time：Cold start≈38s（Open sky）Warm start≈32sHot start≈2s（Open sky）7）.GPS Precision：10m（2D RM）8）.Working temperature：-20℃～+70℃9）.Working humidity：20%～80%RH10）.Measurement：78（L）×27（W）×15（H）mm3.Out look4.Device status indicators(Save power mode) GPS LED Indicator-YellowSolid yellow Searching GPS signalFlashing GPS working normallyOFF Sleep modeGSM LED Indicator-BlueSolid Blue No GSM signal or SIM card not be recognized Flashing quickly(interval0.1s)GSM data transportingFlashing slowly(interval2s)GSM working normallyPower LED Indicator-RedSolid Red Working power from vehicleFlashing(interval1s)Device low batteryOFF Working power from device built-in battery5.Installation5.1Prepare installation(1)ProductCheck.Open the packing box and check the device‘s model and accessories. If the model is wrong or the accessories not complete,please contact the dealer.(2)Choose SIM card.Please take dealer’s advice as reference before insert SIM card.(3)SIM card installation.Insertthe SIM card(as follows).(4)Putback the front cover and screw it up.(5)Connect the device to the9-24Vpower supply.（the red LED constant glow）(6)Install the device in the hidden place of the car；The SIM card must be with GPRS function and enough credit.If your SIM card need input PIN code when power on,please refer to the mobile phone user manual to cancel it5.2InstallationThe GPS tracker must be installed by professional person:(1)Please install the device in the hidden place as followings：-Under Front windshield；-In the front instrument panel；-Under back windshield；(2)Avoid being placed with signal radiators like reverse sensor；(3)The device has built-in GSM and GPS antenna.Please ensure thereceiving side of the device is face up and without metal cover.Note：The metal cover will lessen the GPS signals receiving.6.Device wiring requirements6.1The device power supply is DC9-100V.The red line is positive pole while the black line is negative pole.6.2The negative pole of power supply connects with ground or the metals.Please do not connect with other ground lines.6.3After finished the power supply wire connection,please plug the power supply wire into the device.7.The Device Working7.1Power on:The device will be powered on when detect the current.Then the three LEDindicators will light on continuously.The device will upload the data to the online platform (The uploading data default interval is 10seconds).When the car is in static state for a long time,the device will switch to energy saving mode.7.2Power off ：Pull off the power wire to power off the device.Optional MIC and SOS wiring diagram7.3Feature list:er SMS TEXT Settings(1)Set Admin NumberSMS TextCommandParameter SampleAdd Number 710#number#711#number#710#135****5000#711#138****8000#Delete Number D01#D02#D01#D02#Command Description 1)Admin number can control the oil,power and resume factory settings2)Admin number can receive the alarms call and text of vibration,over speeding,out geo-fence,etc3)SIM must display the income call number to control oil and power.4)Only two number can be set as admin number.5)Resend the command to change admin number.CommandFeedbackSuccessful Setting：Add admin account1OK!(2)Check Admin NumberSMS TextCommandParameter Sample Check901#901# CommandDescriptionView the device admin number directly.Command Feedback Successful Setting：Admin1:135****5000,Admin2:138****8000(3)Set Authorization NumberSMS TextCommandParameter SampleAdd Number101#number#102#number#103#number#101#135****5000# 102#12345678912# 103#12345678913#Delete Number D11#D12#D13#D11#D12#D13#Command Description 1)Authorization Number used to control oil by SMS2)Only three number can be set as authorization Number3)Before change the authorization Number should delete previous number first.CommandFeedbackSuccessful Setting：Add Authorization account1OK!(5)APNTextcommandParameter SampleAPN Setting 802#username#password1：802#internet#123#123#2:802#internet#Command Description APN differs according to the local telecommunication operators.For example：If APN request password，please refer to Sample1,Sample2for no password.Command Feedback Successful Setting：apn setting OK！(4)Check authorized numberSMS TextCommandParameter Sample Check C10#C10# CommandDescriptionCheck the device authorization number directly.Command Feedback Successful Setting：Authorization1：135****5000Authorization2：12345678912Authorization3：12345678913(6)Set/View SERVER HOSTSMS TextCommandParameter SampleSERVERHOSTParameter803#SERVER#port#803#58.61.154.231#7018#ViewSERVERCIP#1）CIP#Command Description Change the IP and port when move to a new server port：10~65535.1is domain and0is IP；Command Feedback SERVER Successful Setting：The setting of HOST NAME is successful! HOST:SERVERPORT:7018CIP#Successful Setting：IP:58.61.154.231Port:7018(7)TIMMER(Set data uploading time interval while car is MOVING) SMS TextCommandParameter Sample TIMEERsetting730#uploading interval#730#20#Command Description Time setting scope：10~3600seconds；20means time interval,the default value is15seconds！CommandFeedbackSuccessful Setting：Set upload move ITV20seconds,OK！(8)Alert on/offSMS TextCommandParameter Sample Alert onCommand911#911# Alert offCommand910#910#Command Description This command is used to set the alert on/off,in case of unknown movement or shake.Command Feedback 911#Successful Setting：Defence setting,OK!910#Successful Setting：Cancel Defence setting,OK!(9)STATIC(Set data uploading time interval while car is STATIC) SMS TextCommandParameter SampleSTATIC SUP#time interval#SUP#5#Command Description Time scope：1~1440minutes；The device has3D transmission and the default time interval is5minutes.CommandFeedbackSuccessful Setting：Set upload still ITV5Mins,OK！(10)Cancel the continuous uploadingSMS TextCommandParameter Sample NUP NUP#NUP#Command Description This command is used to cancel sending data to the platform.If need to restore the uploading,need to reset TIMEER or STATIC ParameterCommandFeedbackSuccessful Setting：Close upload gps information OK！(11)RELAY(Remote cut off fuel/power)SMS TextCommandParameter SampleRELAYParameter1222#222#cut off fuel and power RELAYParameter2333#333#recover fuel and powerCommand Description 1)RELAY control the ON/OFF of the vehicle relay;2)Only admin number can set this parameter.3)Only cut off the oil circuit while vehicle driving speed below20KM/H or in static state.4)When send the command,the vehicle speed is over 20KM/H,device will reply“please waiting”Command Feedback 222#Successful Setting：Oil is cut off! 333#Successful Setting：Oil is restore!(13)VIBRATIONSMS Text Command Parameter SampleVIBRATION Alarm Parameter 123#2#,alarming way#1)123#2#1#2)123#2#2#3)123#2#3#Set the vibration alarmtime intervalV123#1#V123#1# Cancel vibration alarm456#456#Command Description Vibration sensitivity level is from1to5，1is the most sensitive and0is close.Alarming ways:1calling,2:text,3:call and text.Must set the admin number and receiving number.Command Feedback Successful Setting:shock setting,OK!way:1shock interval setting,1Mins,OK! noshock setting,OK!(12)GMTSMS TextCommandParameter SampleGMT 801#location,time#801#E8#Command Description The default time zone is Beijing time.If need change, please operate according to the above command.CommandFeedbackSuccessful Setting:time zone ok!(14)OVER SPEED ALARM SETTINGSMS TextCommandParameter SampleSPEED Parameter SSA#120#alarming way#SSA#120#1#Command Description Speed range:60-220,if not inside this range,the alarm off.Alarming way1:call,2:text,3:call and text. Must set the admin number and receiving number.CommandFeedbackSuccessful Setting：Speeding Alarm setting，OK!(15)RESETSMS TextCommandParameter SampleRESET930#930#CommandDescriptionReset the deviceCommandFeedbackSuccessful Setting：Reset system,ok!(16)FACTORY RESTORESMS TextCommandParameter SampleParameter940#940#CommandDescriptionRestore the factory setting,only admin number can set. CommandFeedbackSuccessful Setting：Factory,OK！(17)LANGUAGE SETTINGSMS TextCommandParameter SampleLANG Parameter LANG1#LANG0#LANG1#LANG0#Command Description Set the language of command feedback,LANG1is Chinese,LANG0is EnglishCommandFeedbackSuccessful Setting：Set language,OK！(18)WHERE(Optional)SMS TextCommandParameter Sample WHERE988#988#Command Description Check the longitude and altitude and other information of the deviceCommandFeedbackReply with longitude and altitude,speed and IMEL.(19)URLSMS TextCommandParameter Sample WHERE666#666# CommandDescriptionCheck the location link of Google mapCommand Feedback GPS!Lat:22.66349long:114.22066,speed:000.0T:04/19/1913:47Location URL:/maps?q=N22.540885,E113.95265(20)PARAM(Device details)SMS TextCommandParameter Sample PARAM886#886#Command Description The command is to check the settings or the default parameter.Command Feedback IMEI:351190012535936 APN:cmnetIP:58.61.154.231 PORT:7018 LANGUAGE:English TIMEZONE:E8 NUMBER INFOR SOS:135****5000 ADMIN1:135****5000 ALARM WAY:1BAT VOL:12.73V(21)STATUSSMS TextCommandParameter SampleSTATUS902#902#CommandDescriptionDesigned for checking the device’s working status.Command Feedback IMEI:353327022096317Basic informationVERSION:61M-Q3_T3-HS-SLW-XY_V2.6_190402 RSSI_LEVEL:83APN:cmnetIP:58.61.154.231PORT:7018PROTOCOL:TCP/IPGPS informationGPS moving report intervals:20secstatic report intervals:5minGPS:UNFIXEDGPS Satellites:0NUMBER INFORSOS:136****5118ADMIN1:136****5118ALARM WAY:3BAT VOL:12.73VOptional functions of one way calling and SOS SMS TextCommandParameter Sample One waycallingSSS#SSS#Command Description Designed for checking the device’s surrounding status. After send the text“SSS#”to the device SIM card number, the device will immediately call back to you.SOS Press the SOS button for more than3s,device will call the admin number immediately in circles until the call will be picked up.Note:Should set the admin number by setting “710#number#”or“711#number#”first.9.Trouble shooting9.1The device is unused or offline on the web server platform9.1.1First,please check the three LED working state.If possible,callthe device’s SIM card number to check:①If the call can not connect to device and feedback the device is notin the GSM service area,please get the GSM signal first.②If reminding the device SIM card is out of fee,please top up the SIM card.③If calling can connect to device,means the SIM card still have fee inside,please check with the SIM card operator that the GPRS function has been opened or not.④If the call can not connect to device and feedback the device waspowered off,please take the device back to analysis as below:a)If the Red LED and blue GSM LED are solid light on,please check theinstallation status of SIM card,if installation no problem,change a new SIM card to retest.b)If the Red LED is off,please check the power terminal wiring isdisconnected or the power line end fuse is blown.Also can use a multimeter to measure the voltage of the main power2P connector.If the voltage is normal,please send the device to the factory for repair.9.1.2Please check there is how many offline devices in the same area,inorder to judge whether its the SIM Card operator’s network problem or not.9.2When GPS cannot receive the signals,please drive to a open skyplace,and ensure there is no metal cover on the device.9.3When the device cannot receive the GSM signal,please check the SIMcard installation.If the GSM signals cannot reach your location(such as the basement),please drive to a open sky place.9.4The red LED can not power on.Check fuse,if its broken,please replace the fuse.。
北斗 GPS车载信息屏使用说明书
XSE-N709型北斗/GPS车载信息屏使用说明书北京朝宇慧科信息技术有限公司请先阅读本节◎感谢您购买本公司的产品，在使用产品之前，请认真阅读本说明书。
当您开始使用产品时，本公司认为您已经认真地阅读了本说明书。
◎本说明书提供的信息，经仔细核对，务求精准。
如有任何印刷或翻译错误，本公司不承担因此产生的后果。
◎本设备属于高技术产品，其中包括操作系统和其他第三方提供的软件。
制造商在硬件的制造的过程和软件的开发以及运用过程中已经尽到了充分的注意义务，以确保产品能够正常工作。
如果产品发生故障，制造商除了根据品质保证规定承担维修责任之处，对于用户因使用本产品而导致的财产损害和经济损失不承担任何赔偿责任。
◎本设备使用的电子地图由第三方提供，该第三方拥有的电子地图的版权受到法律保护，除了在本设备上使用以外，用户不得复制或用于其他用途。
◎对于本设备用的电子地图中信息的有效性，完整性和准确性本设备制造商不做任何明示或默认的担保或保证，对于由电子地图中存在缺陷给用户造成的任何人身损害和财产损失，本设备制造商均不承担任何赔偿责任。
◎此说明书的所有著作权都归公司所有，不得随意复制或翻译此说明书的全部或部分进行商业活动，本公司保留对此说明书内容的最终解释权。
北京朝宇慧科信息技术有限公司目录1XSE-N709型车载信息屏产品简介.................................................................. 1-61.1功能概述........................................................................................................................................ 1-61.2北斗/GPS导航 .............................................................................................................................. 1-61.2.1精确定位................................................................................................................................ 1-61.2.2全国地图................................................................................................................................ 1-61.2.3路径规划................................................................................................................................ 1-61.2.4语音提示................................................................................................................................ 1-61.2.5自动纠错................................................................................................................................ 1-61.2.6设施咨询................................................................................................................................ 1-61.2.7快速查找................................................................................................................................ 1-61.2.8显示设定................................................................................................................................ 1-6 2技术指标及配置................................................................................................. 2-72.1产品标准配置................................................................................................................................ 2-7 3车载智能信息屏使用须知................................................................................. 3-83.1安装注意事项................................................................................................................................ 3-83.2主要功能........................................................................................................................................ 3-83.2.1即时定位................................................................................................................................ 3-83.2.2车载电话/短信....................................................................................................................... 3-83.2.3求助功能(可选) ..................................................................................................................... 3-93.2.4定时信息回传........................................................................................................................ 3-93.2.5现场编程................................................................................................................................ 3-93.3使用提示........................................................................................................................................ 3-9 4车载智能信息屏操作使用说明......................................................................... 4-94.1产品说明：.................................................................................................................................. 4-104.2使用准备...................................................................................................................................... 4-104.2.1车用支架的安装.................................................................................................................. 4-104.2.2SD卡的使用........................................................................................................................ 4-104.2.3触摸式屏幕和手写笔的使用.............................................................................................. 4-104.3界面介绍...................................................................................................................................... 4-114.4存诸器.......................................................................................................................................... 4-11 5功能操作........................................................................................................... 5-125.1呼叫中心...................................................................................................................................... 5-125.2导航.............................................................................................................................................. 5-125.3电话.............................................................................................................................................. 5-125.4通话记录...................................................................................................................................... 5-145.5通迅录.......................................................................................................................................... 5-145.6写信息.......................................................................................................................................... 5-145.7收件箱.......................................................................................................................................... 5-155.8固定短语...................................................................................................................................... 5-155.9发件箱.......................................................................................................................................... 5-165.10音乐.............................................................................................................................................. 5-165.11图片.............................................................................................................................................. 5-175.12电子书.......................................................................................................................................... 5-185.13设置.............................................................................................................................................. 5-195.13.1语言...................................................................................................................................... 5-205.13.2声音...................................................................................................................................... 5-205.13.3电源...................................................................................................................................... 5-215.13.4参数设置.............................................................................................................................. 5-215.13.5卫星监视器.......................................................................................................................... 5-225.13.6触摸屏校准.......................................................................................................................... 5-225.13.7日期和时间.......................................................................................................................... 5-235.13.8应用程序路径...................................................................................................................... 5-235.13.9系统信息.............................................................................................................................. 5-245.13.10恢复出厂设置...................................................................................................................... 5-24 6文件存储路径说明........................................................................................... 6-25 7注意事项........................................................................................................... 7-257.1存放.............................................................................................................................................. 7-257.2电池.............................................................................................................................................. 7-257.3使用.............................................................................................................................................. 7-25北斗/GPS系统应用小常识北斗卫星导航系统﹝BeiDou（COMPASS）Navigation Satellite System﹞是中国正在实施北斗卫星导航系统工程的自主研发、独立运行的全球卫星导航系统，缩写为BDS。
中海达GPS接收机管理软件使用说明书
中海达GPS接收机管理软件使用说明书广州市中海达测绘仪器有限公司HI-TARGET SURVING INSTRUMENT CO.,LTDI手册修订情况 修订日期修订次数 说明 2012年08月 1 中海达GPS 接收机管理软件使用说明书1.0版本II 前言说明书用途欢迎使用中海达GPS接收机管理软件使用说明书，本说明书介绍了如何使用中海达GPS接收机管理软件。
说明书简介本说明书是以中海达GPS接收机管理软件V1.3.7版本软件为例，指导您如何使用中海达GPS接收机管理软件。
本说明书主要由两部分组成，第一部分为简要介绍，第二部分为软件功能的详细介绍。
经验要求为了您能更好的使用中海达GPS接收机管理软件V1.3.7，中海达建议您具备一定的测量知识，并仔细阅读本说明书。
如果您有任何疑问，请查阅中海达官方网站：。
责任免除使用本产品之前，请您务必仔细阅读使用说明书，这会有助于您更好地使用本产品。
中海达不对您未按照使用说明书的要求而操作本产品，或未能正确理解使用说明书的要求而误操作本产品所造成的损失承担责任。
中海达致力于不断改进产品功能和性能、提高服务质量，并保留对使用说明书的内容进行更改而不预先另行通知的权利。
我们已对印刷品中所述内容与硬件和软件的一致性作过检查，然而不排除存在偏差的可能性，使用说明书中的图片仅供参考，若有与产品实物不符之处，请以产品实物为准。
III安全技术提示注意 ：注意提示的内容一般是操作特殊的地方，需要引起您的特殊注意，请认真阅读。
警告 ：警告提示的内容一般为非常重要的提示，如果没有按照警告内容操作，将会造成仪器的损害，数据的丢失，以及系统的崩溃，甚至会危及到人身安全。
技术与服务如果您有任何技术问题，可以电话联系各分支机构技术中心、总部技术部，我们会及时的解答您的问题。
相关信息您可以通过以下途径找到该说明书：1、购买中海达RTK 系列产品后会附带一个光盘，打开光盘可以在说明书文件夹里找到此说明书；2、登陆中海达官方网站，在“下载中心”→“产品说明书”→“测绘产品”里即可找到。
GPS车辆追踪器用户手册说明书
GPS Vehicle tracker(GPS+GSM+SMS/GPRS)User Manual(Version 5.0N)This user manual has been specially designed to guide you through the functions and features of your GPS vehicle tracker.1. Accessories:▶Device▶Power cord▶Relay▶Microphone▶SOS alarm cable & button▶User Manual2. SpecificationsDimension 106(L) x 54(W) x 16(H) mm Weight 96gBackup Battery 450mAh / 3.7VOperation Temperature-25℃-60℃Humidity 5% - 95%Standby Time 60hoursGSM Frequencies 850/900/1800/1900 MHz GPRS Class 12GPS Channel 20GPS Sensitivity -159dBmAcquisition Sensitivity -144dBmPosition Accuracy 10mTTFF （Open Sky）Cold Start: ＜38s Warm Start：＜15s Hot Start：＜2sGSM/GPS Antenna Built-in designLED Indicator GSM-green, GPS-blue, Power-redData Transmit TCP, SMSGeo-fence View any existing Geo-fence in the mapSpeeding Alarm Report when speeds higher than the pre-set value. Low Power Alarm Alarm when backup battery is running outNon-movement Detection Movement alarm based on built-in 3D motion sensor Mileage Report Track by time/distance intervalRemote Control Cut off petrol/electricity3. LED IndicationsGPS LED Indicator - BlueFlashing (interval 0.1s) Searching GPS signalSolid blue GPS fixOFF No GPS fix or initializingGSM LED Indicator - GreenQuick flashing (interval 0.1s) GSM initializingSlow flashing (flash 0.1s every 2s) Receive GSM signal normally Solid green Connected to GSM network OFF No GSM signalPower Status - RedFlashing (interval 0.1s) Low batterySlow flashing (interval 0.2s) Full chargeSlow flashing (flash 0.1s every 2s) Normal operatingSolid Red ChargingOFF Low battery/Power offIgnition detection indication: three LED indicators take turns flashing.4. Getting StartedPlease follow below instructions for ensuring safe and correct use.4.1 Install the SIM cardPlace the SIM card into the device with the gold-colored side facing down.Note: Make sure there is enough credit on the SIM card. If you will be using the GPRS function, you should pay attention to the current SIM card GPRS charge.4.2 Install the deviceYou need to choose somewhere that it won't be found, because the whole point of fitting covert GPS vehicle tracker is the secrecy element.Installation please refers to below picture.NOTE:1. Any high power devices such as reversing radar, anti-theft device or communication equipment would affect the signal of the device.2. All metallic cases of the windshield will attenuate the signal on the tracking device. It’s simply due to the shielding effects of the metal compound of the case.4.3 Wiring configurationLine No. Specification Color Instruction1. 2 Keypod Orange / Orange Connect to SOS button3. 4 MIC-,MIC+ Black / Red Connect to Microphone5 TX Green Sending data (TX) / backup6 RX White Receiving data (RX) / backup7 GND Black Ground wire8 MOTOR Yellow Connect to relay control line9 ACC White Connect to ACC ignition10 V- Black(thick) Negative side of 12V/24Vcar storage battery.11 V+ Red(thick)Notes of the relay wiringThe relay wiring of pump: oil connectors of both ends are a fine white line (85) and a fine yellow line (86). The fine white line (85) is connected to vehicle positive power (+12V). The fine yellow line is connected to the device relay control line.Cut off the positive connection line of the pump; then connect in series to the relay N.C. contact (thick green line 87a) and the other end to relay COM contact (thick green line 30).4.4 Device wiring diagramPlease choose the right relay (12V-standard / 24V-optional) for the proper installation. 4.5 Power/ACC/Tele-cutoff(petrol/electricity) control line (4 pin) 1. Your device comes with a power cord and is designed to use only manufacturer-specified original device. The red line is positive while the black one is negative (the side should not be connect with ground wire).2. The ACC line (white) connects to ACC switch of the vehicle. Please be sure to connect the ACC line; otherwise the device will enter ignition detectionstatus when disconnect the ACC line. If you don’t need to anti-theft temporarily, just connect the ACC line to the positive side in parallel.3. Tele-cutoff (petrol/ electricity) control line (yellow) is connected to pin 86 of the Tele-cutoff (petrol/ electricity) relay (equal to the yellow line of the relay socket).4. USB cable (3 pin)Firmware updating interface/expanded function to reserve space.5. MIC line (2 pin)Externally connect to microphone for voice monitoring function.6. SOS line (2 pin)Externally connect to SOS switch for SOS function.5. Quick Operation InstructionsOperation Tips: To properly use the device, common parameters should be set before initial use. This can be done by using the parameter editor or by sending SMS commands to the device. (“,”should be English comma and no space before and after the comma)5.1 APN settingTo connect default platform , please send the SMS command below:APN command format: APN,APN's Name#E.g: APN,internet# (“internet” is the APN of carrier)The device will reply “OK” if setting successfully.Note: The APN of some countries have user name and password, you may need to send SMS command as following:APN,APN name,user name,password#E.g: APN,internet,CLIENTE,AMENA#5.2 DNS settingTo connect other platform, please send the two SMS commands bleow: Command format：SERVER,1,DNS,Port,0#E.g:SERVER, 1,,8841,0#It will reply “OK” after set successfully.5.3 ON /OFF GPRSWhen you want to disable GPRS, you can SMS command to the SIM card number which used in the device.Command format:GPRS ON：GPRSON,1#GPRS OFF：GPRSON,0#It will reply “OK” after set successfully.5.4 Add specific numberSMS command to the device to set the SOS number.SOS,A,No.1,No.2,No.3#“A” means to add new numbers, for example:SOS,A,135****5991,135****5992,135****5993#If there is only one SOS number, you can appoint a specific number as SOS number. And the null means no adding.For example:SOS,A,135****5991#means to set the first number as SOS number SOS,A,,135****5992#means to set the second number as SOS number SOS,A,,,135****5993#means to set the third number as SOS numberIf set successfully, there is a “success” reply SMS.5.5 Delete specific numberBefore deleting specific number, please check its corresponding code. For the code, please SMS “PARAM#” to the device.SMS command to the device to delete the number.SOS,D,serial NO.1,serial NO.2,serial NO.3#“D” means to delete the number, for example:SOS,D,1# means to delete the first numberSOS,D,3# means to delete the third numberIf you want to delete more than one numbers, you can send this command: SOS,D,1,3# means to delete the first and third numbers.If you forget serial number of the mobile number you want delete, you can send this command:SOS,D,mobile number# means to delete the mobile number directly.For example:SOS,D,135****2360#meanstodeletethe135********directly.After deleting the SOS number, it will receive “Delete number 135XXXXXXXX success! specific number total 2” for successful deleting of the specific number.5.6 Set the center numberIf you want to cut off/restore oil by SMS command, you have to set a centernumber firstly. Only the center number can send the cut off/restore oil command to the device. You can set your own mobile number as center number.The command for setting center number is:CENTER,A,mobile number#Forexample:CENTER,A,159****3401#If set successfully, there is an “OK” reply message.NOTE：Only the SOS number can be used to set center number successfully.5.7 Delete the center numberSMS command to the device to delete the center number.The command is:CENTER,D#For example:CENTER,D#If set successfully, there is an “OK” reply SMS.NOTE：Only the SOS number can be used to delete center number successfully.Only SOS phone number can send this command successfully to set the center number. There is only one center number can be set.5.8 Check parameter settingSend command to the terminal, you can check the parameter setting. Command format: PARAM#e.g.: PARAM# Information replied:IMEI: 353419032348877 ---IMEI number of the device;Timer: 10,10; ---GPS data uploading Interval;SENDS:5; --- the GPS working time when ACC is OFF;SOS:159****3401;---SOSnumbers,maximum3SOSnumberscanbeset and used for alarm and monitoring;CenterNumber:159****3401;---only1centernumbercanbesetandused for cutting off /restoring oil command;Sensorset:10,1,5,180 --- detect 5 vibrations in 10s; the alarm delay is 180s; Defense time: 10; --- the defense delay is 10 minute;TimeZone:E,8,0; --- set time zone; default as E8.The replied information contains IMEI number, GPS data uploading interval, SENDS, SOS, center number, sensor set time interval, defense time and time zone.5.9 Check GPRS parametersSMS command format：GPRSSET#Eg：GPRSSET#Reply message：GPRS:ON //GPRS on/off status// Currently use APN:,,; //APN setting information// Server:1,,8841,0; //platform information// URL:/maps?q=; //preset web link setting information // 5.10 GPS data uploading intervalThe default sending interval is 10,10. It means when ACC ON ,the device will upload positioning data to platform server every 10s.when ACC OFF ,the device will upload positioning data to platform server every 10s.Users can modify sending interval by SMS“TIMER,time1(seconds), time2(seconds)”The time1&time2 ranges from 10-18000sFor example:TIMER,10,20#It means when ACC ON ,the device will upload positioning data to platform server every 10s.when ACC OFF ,the device will upload positioning data to platform server every 20s.5.11 Sensor alarm time settingWhen the vehicle power is off and ACC is in low-level, if ACC is off over 10 minutes, the device will enter sensor alarm state. In this case, if the vehicle vibrates for a few times, it will activate the vibration alarm system. If the vehicle battery is still not on (ACC is in low level) after 3 minutes, the device will start vibration alarm.SMS format: “DEFENSE,TIME(minutes)#” The time ranges from 1 to 60 mins.For example: DEFENSE,15#. It means when ACC is in low level for 15mins, it will enter sensor alarm status (vehicle power is off)NOTE：1. Preset SOS numbers when send SMS alarm messages and calls2. If there is no need for vibration alarm, please SMS SENSOR,0# to close it.5.12 Restore to factory settingSMS command format: “FACTORY#” to set all parameter to default factory value. Once received “OK”, it succeeds.5.13 Reboot deviceWhen there is something wrong with the link of GPRS, e.g., The parameter setting of the device is correct, but you can't track the car on the platform. At this moment you can send a command to the device to reboot the device. The format is: RESET#After receiving this command, the device will reboot after 1mins.6. Operation of device6.1 Power on/ Power offPower on: Once insert a valid SIM card and connect all the wires, turn on the device, then Power LED will flash first, During signal searching process, GSM and GPS LED will flash. Once GPS LED keeps solid light, it means the device has been located and it starts to work.Power off: Just turn off the power switch.The device will begin to upload positioning data to server once inserting a valid SIM card and power on. During the working time, it can upload data to server every 10 seconds.6.2 Check location1. Via SMS1.1 SMS “WHERE#”, to the SIM number of device. The device will send a location message automatically. You can get the coordinates. If the device does not search any information of location, it will send “No data” to the cell phone.Example:Lat:N22.571285,Lon:E113.877115,Course:42.20,Speed:0.0740,DateTime:10-11-23 22:28:511.2 SMS “URL#”, to the SIM number of device. The device will send a location Google Map link. If the device does not search any information of location, it will send “No data” to the cell phone.Example:<Date Time：10-11-23 23:42:51> /maps?q=N22.571490,E113.8771032. Via platformGo to the platform website offered by dealers to check your vehicle location.6.3 SOS alarmIn emergent case, press SOS for 3s to activate SOS alarm. Then the device will send SOS SMS to preset specific numbers and then dial the numbers in circles until the call is picked up. At the meantime, the device will upload SOS alarm data to the server. And it will send:SOS Alarm! <DateTime:11-06-17 14：53：06>，/maps?q=N22576713,E113.916585Note: The specific numbers should be preset, just refer to 6.46.4 Wire cut-off alarmWhen the electricity supply of device is cut off, it will activate cut-off alarm. In this case, the device will send related SMS to the specific numbers and dial the numbers in circles. If nobody answers, the call just keeps 3 loops at most. At the meantime, the device will upload SOS alarm data to the server. And it will send:Cut Power！<Date Time:11-06-17 14：53：06>，/maps?q=N22576713,E113.916585Note: The specific numbers should be preset, just refer to 6.46.5 Low battery alarmWhen the device is only working with battery, once the internal voltage of battery is less than 3.7V, device will send low battery alarm sms to specific number and alarm on platform.Low battery alarm sms content example: “Attentionbattery too low, please charge.” Which means the battery is to low, to inform user charging it i n time. Note: The specific numbers should be preset, just refer to 6.46.6 Vibration alarmThe vibration alarm function is off by default. To activate this function, please send the following command: SENALM, ON#. The alarm will be sent to both the service platform and SOS numbers.When vehicle power is off, ACC status is low, and if the lead time of low ACC is more than 10 minutes （settable）, device will activate security alarm. When the security alarm is on, once the vehicle vibrates for several times, the alarm will be activated; in the next 3 minutes, if vehicle power is still off（ACC status is low）, device will start alarm. At this time, it will send alarm message to the service platform with the latitude and longitude, while the platform will reply the Chinese address. Then the terminal will send vibration alarm message to SOS numbers with the Chinese address, and call the SOS numbers in cycle. If nobody answers, it will stop calling after 3 loops.If the Chinese address can not be acquired for certain reason, the terminal will send a message with the website link to the SOS numbers.e.g.:Sensor Alarm！<11-23 14:53>,/maps?q=N22576713,E113.916585Note:1.The SOS numbers should be preset.2.Send “SEN ALM, OFF#” to turn off the vibration alarm.6.7 Voice monitoringWhen the special number cell phone dial device, ringing for 10 seconds, it will enter voice monitoring status. At this time, caller can monitoring the sound in vehicle. Incoming call from non special number will not activate voice monitoring function.Note:To realize this function, please set special number beforehand.The SIM card put into the device should be equipped with caller identification.6.8 Oil cut-off1. Via platformSend oil cut-off command on platform. To make sure the security of vehicle, tracker can only indicate to cut off oil when GPS is in valid position status, and the speed is less than 20KM/H or in static. Platform account password is needed when sending oil cut off command.2. Via SMSFirstly, you should set a center number. Please refer to 6.6.Only center number can send the command to the device to cut off and restore oil.The format is: RELAY,1#After the command is carried out, it will reply “Cut off the fuel supply: Success! Speed:0 Km/h”. If the command didn't carry out, it will reply the reason about fail to carry out.Note: To ensure the safety of the driver and the car, this command is valid only under two conditions: the GPS is located; the speed is less than 20km/h 6.9 Restoring Oil1. Via platformWhen the alarm is off, sending recover oil commands manually. Device will restore oil supplying, and vehicle will work normally again.Platform account password is needed when sending oil cut off command.2. Via SMSOnly center number can send the command to the device to restore oil.The format is: RELAY,0#After the command is carried out, it will receive “Restore fuel supply:Success!”6.10 Over speed AlarmWhen the car is moving over a limited speed in average in a limited time period, then the device will send over speed alarm SMS to user.To turn on the over speed function, please send below SMS command: SPEED,ON/OFF,Time,Limited speed,uploading mode#Speed alarm switch:ON/OFF default:OFFTime range (seconds):5-600s(default as 20s)Limited speed range(km/h):1-255km/h. default:100Mode:0/1. default:1 way of alarming,0 means GPRS only,1 meansSMS+GPRSExample:SPEED,ON,20,100,1#Means when the car is moving over 100km/h in average in 20 seconds,the device will send over speed alarm to user7．Web based tracking online activationThe GPRS web based tracking platform allows real time tracking with the latest Google maps. There is also a playback feature that allows you to view where the vehicle has been for up to 30 days in the past making it ideal for fleet management.8．Trouble shootingIf you are having trouble with your device, try these troubleshooting procedures before contacting a service professional.Problems Causes SolutionsFail to connect platform The fuse blows Replace the fuse ACC ignition disconnected Turn on ACC with keyFail to connect network Wrong installation of SIMcardCheck SIM card installation(Refer to 4.1 Install SIM card) Filth on the SIM card ironsurface.Clean itUseless SIM Contact internet serviceproviderImproper installation Check installation of device(Refer to 4.2 Install the device) Beyond GSM service area Use it in effective GSM serviceoffer areaBad signal Try again in a better signalareaFail to charge The voltage is unsuitable Connect with power withsuitable voltage Improper connection Check connection withcharger1. The warranty is valid only when the warranty card is properly completed, and upon presentation of the proof of purchase consisting of original invoice indicating the date of purchase, model and serial No.of the product. Wereserve the right to refuse warranty if this information has been removed or changed after the original purchase of the product from the dealer.2. Our obligations are limited to repair of the defect or replacement the defective part or at its discretion replacement of the product itself.3. Warranty repairs must be carried out by our Authorized Service Centre. Warranty cover will be void, even if a repair has been attempted by any unauthorized service centre.4. Repair or replacement under the terms of this warranty does not provide right to extension or renewal of the warranty period.5. The warranty is not applicable to cases other than defects in material, design and workmanship.Maintenance RecordShenZhen Concox Information Technology CO.,LtdTel: +86 755 2912 1200Fax: +86 755 2912 1290E-mail:**************.Add: 4/F, Building B, Gaoxinqi Industrial Park,Liuxian 1st Road, No.67 Bao'an District, Shenzhen DateServiced by Product ModelIMEI NumberFaultDescriptionsCommentsWarranty instructions and service。
GPS 北斗定位模块说明书
GPS/北斗定位模块说明书GPS/北斗定位模块使用说明书V2.4济南智泽贸易有限公司目录1.产品介绍 (1)1.1.产品概述 (1)1.2.产品特点 (1)1.3.技术指标 (1)1.4.产品尺寸 (1)1.5.硬件接口 (2)2.通信协议 (3)2.1.通信协议 (3)2.2.寄存器定义 (4)3.协议详解 (6)3.1.读保持寄存器 (6)3.2.读取版本号 (6)3.3.读取设备地址 (7)3.4.读取设备波特率 (7)3.5.读取奇偶校验位 (7)3.6.读取定位数据（RMC） (8)3.7.定位数据（RMC）解析 (8)3.8.修改设备地址（广播） (9)3.9.修改波特率 (9)3.10.修改奇偶校验位 (9)4.保修期限 (10)5.技术支持 (10)6.联系方式 (10)7.免责声明 (10)1.产品介绍1.1.产品概述GPS/北斗定位模块，是一款具有GPS定位和北斗定位的双模定位终端，可以快速、精确定位位置。
定位模块内含双模定位芯片，快速定位位置，并且将定位信息以RS485接口和Modbus协议的方式提供给用户使用，串口波特率最高可达115200bps，可以通过PC机设置软件或串口命令轻松控制，使用方便快捷。
1.2.产品特点⏹同时支持GPS定位和北斗定位⏹串口波特率自定义，支持2400～115200bps⏹串口支持全双工和半双工串口通讯，支持RS485收发自动切换⏹模块串口波特率等参数可通过PC机或串口命令配置⏹RS485带TVS、过流等保护⏹提供天线状态诊断，提供天线开路、短路等状态信息1.3.技术指标环境参数⏹工作温度：-40℃~80℃⏹工作湿度：5%~95%RH，无凝露供电⏹工作电压：DC5~28V⏹功耗：≤0.3W定位精度⏹出色的定位功能，支持BDS/GPS/GLONASS卫星导航系统的单系统定位，以及任意组合的多系统联合定位⏹冷启动捕获灵敏度：-148dBm跟踪灵敏度：-162dBm⏹定位精度：2.5米（CEP50）⏹内置天线检测及天线短路保护功能1.4.产品尺寸产品尺寸长x宽x高为：95mm x50mm x30mm，其中95mm包含长度80mm和两个安装孔15m图1-1产品尺寸1.5.硬件接口图1-2硬件接口硬件接口定义见表1-2硬件接口定义。
GPS定位终端说明书
GPS车辆防盗追踪器安装使用指南（版本1.3）GPS定位防盗一体替代传统防盗器手机就是你的遥控器安装使用前请仔细阅览说明书绑定激活说明（必须要做，否则无法进行其它操作）车主手机给追踪器手机号码发送激活短信：（注：发短信前先确定开机状态，并可正常接收短信）短信格式：SZMM,老密码,新密码, 定位器手机号码其中初始密码为123456，新密码由用户自己设置。
【举例】注：(隔开符号为：逗号)SZMM,123456,123456,138XXXXXXXX 其中“138XXXXXXXX”为定位器内所插卡的手机号码。
收到提示成功的短信后，车主可以进行其它短信指令操作或网上查车操作。
（需要修改密码也同上操作）设置参数：（车主手机发送短信代码给定位器手机号）车主发送“SZCS”指令，可以对车辆的相关配置信息进行修改。
指令格式如下：SZCS,密码,参数名=参数值（,参数名=参数值，……）(隔开符号为：逗号)参数名可以为下列几种：例如：开启震动短信通知：SZCS,密码,VIB =1关闭振动短信通知：SZCS,密码,VIB =0 （默认）开启震动电话通知：SZCS,密码,VIBCALL=1 （默认）关闭震动电话通知：SZCS,密码,VIBCALL=0注：短信通知每次短信费0.1元电话通知直接挂机零费用开启自动休眠：SZCS,密码,SLEEP=1关闭自动休眠：SZCS,密码,SLEEP=0 （默认）自动休眠说明：静止超过30分钟自动进入休眠省电状态，有震动立即唤醒，或者车主拨打定位器卡号即唤醒开启超速短信通知：SZCS,密码,SPEED =130（超速130公里即短信报警，数值自由设定）关闭超速短信通知：SZCS,密码,SPEED =0 （默认）关闭追踪：GBZZ 开启追踪：KQZZ定位：车主手机发送短信“DW”到追踪器电话号码上，追踪器将回复中文短信，短信中描述车辆当前所处的位置。
比如：XX 省XX市XX路XX大厦附近。
GPS使用说明书
使用说明书
1、GPS基本用健说明
本机只适用于日常巡线作
用，不能打接电话或是发送短
信。
1、电源开关键：长按此
健可以可关机或开机；操作时，
按此健可以可以返回上一菜
单，长按此键可以返回待机界
面。
2、音量健：“+”可以曾大声
音，“—”可以减小声音。
3、手电筒开关键：上下拨动
可以启停夜间手电功能。
4、确认健：按此键可以确定
所选功能。
5、导航键：可以上下翻动光
标。
6、FM健：是收音机开启收
音机功能。
7、键盘锁：可以拨动键盘锁
开关将键盘锁定或是开启。
2、使用方法：
2.1、电池装好后，长按电源键，GPS将开机。
2.2、开机后待读卡成功后，显示屏上方将显示在等图标，
这样为正常状态，正常后，为便于携带，把键盘锁锁上。
2.3、
2.3．1、
2.3．2、
3、注意事项：
3.1、GPS使用过程中，不能进水、烘烤（电池会爆炸）、摔打等。
3.2、GPS要时常保证电池有电状态。
GPS18说明书
（一）功能说明一．主机各部功能位置说明二．主机启动显示说明1．开机启动程序1-1 开机时会先进行荧幕测试,所有字幕会全亮（包括电子罗盘/雷达频率/距离速度显示）。
1-2 会播报欢迎词【欢迎使用全球卫星雷达系统，请系好安全带】。
1-3 坐标版本显示，目前GPS版本ΧΧΧΧ。
1-4 当地时间显示，目前时间ΧΧ：ΧΧ(12小时制)。
1-5 驾驶模式提示，预设值为『安全驾驶限速模式』。
1-6 雷达频率显示当主机接收到雷达讯号时，显示幕会显示收到的雷达频率。
在市区行驶时，当主机收到干扰讯号时，主机也会显示干扰讯号频率雷达频率的种类如下：2．卫星启动状态2-1 当卫星连接成功时，会先播报"祝旅途平安"。
2-2 当机器处于卫星连结状态时，时间中的‘：'会持续闪烁（见图），反之当无法与卫星连接时，时间中的‘：'将不会持续闪烁，在无法与卫星连接的状态时，电子罗盘的东、西、南、北会持续轮流闪烁，当与卫星连接时，电子罗盘会依据车子行进的方向而显示方位。
三．主机功能查询1．系统资讯查询与下载模式▲此功能项目查询需轻按【SET】一秒，方始能进入系统资讯循环查询.如需重复播报，则可轻按【MOD】一秒1-1 经纬度查询，此项目需在机器与卫星连结后，方能查询。
机器会依据目前使用者所在方位播报经纬度与海拔高度，当汽车处于行驶状态也会播报行驶方向。
1-2 日期时间查询，此项目需在机器与卫星连结后，方能查询。
会透过卫星交替显示目前的日期和时间1-3 电瓶电压查询，会依据汽车目前的状况播报电瓶电压数值。
1-4 系统更新模式，当使用者需要更新坐标资料时，需切换GPS主机到系统更新模式。
才能开始进行坐标更新，座标更新网址是 ，在更新之前须注意以下事项：▲系统需求：WINDOWS XP （SP1/SP2 ）或WINDOWS VISTA WINDOWS XP （SP1/SP2 ）1.DTL USB-to-Serial2.Microsoft Installer3.1 Framework 2.0▲浏览器需求：Microsoft Internet Explorer四．系统功能设定1．系统功能循环设定▲此功能项目查询需长按【SET】三秒，方能进入系统功能循环设定.▲进入系统功能设定后，每按【SET】轻按一秒，就可循环选择设置系统功能，当设置完毕后可长按【SET】三秒储存设定，或静待三秒即回到预设画面。
麦哲伦GPS2000中文使用说明书
麦哲伦GPS2000中文使用说明书一、GPS功用：在天空视野良好的条件下，GPS通过接收导航卫星的信号，获得准确的时间；收到3颗卫星信号，可以获得你在地球表面的一个2维固定坐标；接收到多于3颗卫星信号，可以计算出海拔高度，获得3维坐标。
现在天上约有30颗美国国防部的GPS导航卫星，以确保在大多数地方可以提供6颗以上的卫星导航。
移动时，可以指示行进方向，可以当作罗盘使用。
通过输入坐标，可以计算距离、方向、速度、预计用时等信息，提供导航服务。
具体用法：显示运行轨迹、设置导航路线、产生一条返回路线等等。
麦哲伦GPS还可提供固定点的指定日期的日出日落时刻、月相。
二、安装电池：GPS2000使用4个5号碱性电池，安装的时候可以感觉到阻力，你能够发现电池盖上有一个密封圈。
待机时间：最多可以连续使用17个小时。
为减少废弃电池对环境的危害，强烈推荐使用大容量充电电池.快速应用：(前提：已经过初始化)得到当前位置坐标，按ON/OFF(开关机)键开机，在数秒钟后，屏幕下方显示“SEARCHING”，GPS2000开始搜索卫星，把接收机放到开阔的地方接收信号。
当接收到卫星时，屏幕下方的SEARCHING变成一个状态条，当3个空格全部变黑时表示能够接收到3颗卫星的信号，如果能够保持几分钟，GPS2000即可锁定卫星，此时屏幕左下角的锁关闭，并给出正确的平面(2维)坐标。
如果能够锁定第4颗卫星，屏幕下方的2D图标消失，能够显示海拔高度。
此时表示GPS2000已经定位，已获得立体(3维)坐标。
三、名词解释：固定点：GPS2000接收卫星信号来计算出一个坐标值来描述你在地球上唯一的位置，这叫做获得一个固定点。
计算出的坐标就是这个固定点。
固定点坐标值可以在“POSITION”（在3.04版为LAT/LON，下同）屏幕看到。
地标：（LandMarK简写为LMK）固定点可以命名后保存，实际应用中可能有很多情况下也称作路点。
去：（GOTO）你可以按"GOTO"键选择一个目的地地标，GPS2000将从现在的位置引导你到目的地并可以获得方位和距离信息。
GPS接收机使用说明书
RTK 工作模式
RTK (Real Time Kinematic)是一种差分 GPS 数据处理方法。主要构成：基准站、移 动站、数据链、控制软件。基准站实时的将卫星观测数据和基准站坐标发送给移动站， 移动站通过电台或 GPRS/CDMA 接收差分数据，并在机进行处理，从而实时得到移动站 的高精度位置。
基准站若以自启动方式来启动，架设好仪器开机后，无需操作，差分数据自动发送， 此时基准站以获得的当前位置单点定位值来启动。基准站开机后默认的启动方式就是自 启动。建议启动基准站时，还是使用下面介绍的“手簿启动”方式，因为这样启动时， 保留了启动基准站时使用的点的坐标，方便将来可能继续使用当前的位置来启动基准站。
提示信息
电台在工作过程中，如果“RXD”灯闪烁，说明电台接受到外界信号了，并会对当 前工作中的电台产生干扰，此时需要按“CHANNEL”按钮切换信道，直到“RXD”灯 不亮为止（相应的也要更改移动站内置电台的信道，详见《博飞 RTK 手簿软件操作手 册》）。
8
3.3 仪器架设
3.3.1 架设要求
基准站应该选择视野开阔的地方，这样有利于卫星信号的接受。 基准站架设高度应避免过低，防止人为干扰。 基准站架设的脚架应整平，（如果基准站架设在已知点时，还要求进行对中）。 在有电台的情况下： 基准站脚架和天线脚架之间应该保持至少 3m 的距离，避免电台干扰 GPS 信号。基 准站应架设在地势较高的地方，以利于 UHF 无线信号的传送，如移动站距离较远，还需 要增设电台天线加长杆。
3 RTK 基准站工作模式....………………..……….………………..8 3.1 认识基准站接收机…………………….…….………………8 3.2 外置 PDL 电台的设置……………………..….…………….8 3.3 仪器架设…………….……………………………………….9 3.3.1 架设要求 .……………………………………………9 3.3.2 电台模式连接图示 .…………………………………9 3.4 启动基准站 …………………………….…………………..11 3.4.1 自启动……………………………..…………………11 3.4.2 手簿启动……………………………..……………….11
GPS导航系统用户指南说明书
Traveling To Your DestinationSave Current LocationThis option tells the system to store the current location for later use. It does not change or cancel the route instructions you are using at the time to reach a destination.For example, you are following the system's directions to get to a destination. You are sitting at a stoplight and notice a curio shop on the corner. You do not have time to visit it right now, but you would like to in the future. This option saves the location of the intersection so you can select it as a destination at a later date.To save the location (while thevehicle is stopped), touch the vehicle position icon. When the current address is displayed, touch "Save Current Location." After the location is saved, select "Return" to return to the Map screen.The current location is saved in the previous destination list. Use the Previous Destination option in the Main Menu to select it. It will appear in the list as "Save" followed by the location.Navigation SystemTraveling To Your DestinationGPS Signal Strength Green — Strong Yellow — WeakNot shown — No signalNorth Pointer(In 1/20, 1/8, and 1/2 mile map scales, touch tochange map orientation)Time to DestinationMap Scale Adjustment (Appears only when you press Zoom In/Out buttons)Map Scale(Miles per half inch)Blue line — Calculated route White — HospitalYellow — Shopping Mall Orange — University Dark Green — ParkMedium Green — Golf CourseGray — Airport/Stadium/Business Light Blue — Body of WaterCurrent LocationCurrent RoadNavigation SystemMap ScreenDirection to DestinationDistance toDestinationTraveling To Your DestinationLandmark IconsLandmark icons will be shown in the screen if you select the "Show Icon on Map" in the "Set-up Screen". See "System Setup" on page 60.Going Off the RouteIf you leave the calculated route,"Off-route" (manual) or"Recalculating" (automatic) is displayed at the top of the screen.The system will recalculate the route from your current location anddirection to the desired destination;then give you a new route instruction.This recalculation is doneautomatically unless you set it to manual in the Setup Menu. See "System Setup" on page 60.Auto RecalculationIf this option is set to "Automatic"you will see. "Recalculating" flash at the top of the screen for several seconds as the system recalculates the route. This is followed by a new route instruction.Manual RecalculationIf this option is set to "Manual", you will hear a tone when the "Off-route"message is displayed. You mustpress the Joystick or "ReCal" icon in the screen before the system will recalculate your route.Navigation SystemTraveling To Your DestinationModifying the RouteSeveral functions in the system allow you to view the route the system has calculated. You can then have the system recalculate portions of the route. This is helpful if you are aware of road conditions along the calculated route that you wish to avoid.With the map screen displayed, you can push the MAP/GUIDE button at any time to display the guidance screen. With the guidance screen displayed, move the Joystick left or right to see the Direction List. This shows you all the route instructions between your current location and your destination.Instructions that have already been executed cannot be displayed.Push the joystick down to see the upcoming route instructions one at a time. Each push displays the next in-struction in the sequence. Push the joystick up to move backwardthrough the sequence to the current instruction. The display returns to the current route instruction in about 10 seconds if you stop pushing on the joystick.Navigation SystemTraveling To Your DestinationPressing the MENU button with either the map screen or theguidance screen displayed changes the display to:This menu lets you cancel or modify the current calculated route.DetourSelect this option if you encounter an unexpected obstacle, such as a closed road or extremely heavy traffic congestion. The system will calculate a route from your current location that detours you off the original route, and then back onto it after a certain distance.Avoid a StreetThis option lets you delete a street or streets from the current calculated route. This is helpful if you know of road construction or other snags on the prescribed route.Plan New TripSelecting this option cancels the current route and destination. The display returns to the "Main Menu".Back to Current RouteSelecting this option returns you to the original guidance screen.Navigation System。
GPS定位器 说明书
GPS定位器使用说明书1安装说明1.1连接线说明DC+ 电源正极ACC 点火线GND 地线pOff 断油/断电控制线1.2安装前检测:1、检查配件主机、4Pin连接线、油路控制器、说明书2、SIM卡购买SIM手机卡（支持GSM/3G网络），如果开通GPRS功能，可以实现网上查车，如果开通来电显示功能，能进行电话远程监听。
设备没有SIM卡，不能正常工作。
1.3安装调试步骤1) 检测电源按接线图安装完成后,通电,LED指示灯会闪,如果不亮,表示设备供电不正常或损坏。
2) LED光灯状态指示检查◆亮1秒灭1秒表示GSM注册成功,约三十秒左右。
◆亮0.1秒灭2.9秒表示GPS定位,约四十五秒左右。
◆如果绿灯快闪(亮0.1秒,灭0.1秒) 超过三分钟后，可能SIM卡未插好,或设备损坏。
◆常亮表示GSM注册网络成功，并且GPS定位。
3) 拨打电话在LED灯常亮后,拨打设备的SIM号码,如果能通，即工作正常,可以进行短信操作或网络设置。
1.4安装注意事项●GPS天线与GSM天线内置,注意安装位置,否则会定不到位.●主机不防水，工作温度-40~60℃,注意固定位置。
●油路控制器分为12V和24V，安装时，注意与汽车供电电压是否一致。
2短信操作说明短信命令格式为：A******,功能序号，参数其中A表示命令开始，******为设备操作密码，初始化密码为000000，参数视具体的功能序号而定。
将短信发送到设备中的手机卡上，设备会自动回复应相的短信。
短信全部采用半角，如果密码错误、格式错误，设备将不会回复短信。
2.1位置请求（000）短信格式：A******, 000例如：A000000, 000设备收到短信后，回复位置信息，格式如下：Longitude E114.04577 Latitude N22.32405 08-10-20 17:38:30，如果没有定位，则经纬度时间都是0，为无效值，时间为格林威治时间，如北京为东8区，小时加8才能与本地时间一致。
GPS导航器操作手册说明书
Table of ContentsIntroduction (2)Important Safety Information (3)System Controls (4)Screen 4 MENU button (5)MAP/GUIDE button (5)CANCEL b utton (5)ZOOM button (5)SETUP icon (5)JOYSTICK (5)A/C button (5)System Start-up (6)Main Menu (7)Address (7)Intersection (7)Phone No. (POI) (7)Places (7)Map I nput (7)Personal Addresses (8)Previous Destination (8)Today's Destinations (8)Selecting By Address (9)Change State (9)Selecting the City (11)Selecting the Street Address...... 13Selecting By Intersection. (15)Selecting the City (16)Selecting the Street (18)Selecting By Phone No. (POI) (21)Selecting By Places (22)Name (22)Category (25)Selecting By Previous Destination (32)Selecting By Map Input (33)Current Position (33)A City (34)State 36Continental U SA (38)Selecting by Today's Destinations (39)Adding Destinations To The List (39)Selecting Destinations From the List (40)Editing the List (41)Traveling T o Your Destination (42)The Map Screen (46)Save Current Location (47)Landmark Icons (49)Going Off the Route (49)Modifying the Route (50)Personal Addresses (52)Entering a PIN (52)Entering Personal Addresses (53)Updating a Personal Address (57)Selecting a Personal Address Asa Destination (58)System Setup (60)Bright (60)Volume (60)Display (60)Reroute (61)Address (61)Location Correction (62)Personal PIN (63)Clock (63)Information (63)Show Icon on Map (64)System Security (65)System Limitations (66)Customer Assistance (68)DVD R emoval (69)Non-detailed Coverage (70)Detailed Coverage Areas (71)Climate Control System (76)Navigation SystemRefer to 2003 TL O wner's Manual for more information.User AgreementAlpha Indexv wIntroductionYour Acura Navigation System is a highly-sophisticated location system that uses satellites and a map database to show you where you are and to help guide you to a desired destination.The Navigation System receives signals from the Global Positioning System, a network of 24 satellites in orbit around the earth. By receiving signals from several of these satellites, the Navigation System can determine the latitude and longitude of your car.In addition, a gyroscopic sensor and a speed sensor in your car keep track of the direction and speed of travel at all times.The Navigation System applies thislocation, direction, and speedinformation to the maps and calcu-lates a route to the destination youenter. As you drive to thatdestination, the System providesguidance.The Navigation System is easy to use.The locations of many places ofbusiness and entertainment arealready entered in the system. Youcan select any of them as a desti-nation by pressing only one or two ofthe controls.If a desired destination is not in thesystem's database, you can enter itsaddress and the system will directyou to it. This destination can besaved for reuse at a later date.As you drive, the Navigation Systemprovides visual and audio drivinginstructions so you do not have totake your eyes off the road. Theseinstructions are provided in advanceof the actual driving maneuver soyou have time to slow down andchange lanes if necessary.Read this manual thoroughly so youare familiar with all the NavigationSystem's features. Afterwards, keepthis manual in the glove box of yourvehicle so you can refer to at anytime.Navigation SystemImportant Safety InformationThe Navigation System can distract your attention from the road if you focus on the screen or operate the system's controls while driving.You should always enter information into the system before you begin driving. Then, as you drive, you can listen to the audio instructions or glance at the screen.Operating the NavigationSystem controls while you aredriving can take your attentionaway from the road, causing acrash in which you could beseriously injured or killed.Enter information into thesystem only when your car isstopped.The Navigation System is designedto provide route information to helpyou reach your destination. However,this route guidance may sometimesconflict with road conditions such asstreet closures, road construction,and detours.Additionally, the system itself hascertain limitations (see page 66).Therefore, you must verify the audioand visual route informationprovided by the system by carefullyobserving the roadway, signs andsignals, etc. If you are unsure,proceed with caution. Always useyour own good judgment, and obeytraffic laws while driving.Navigation System。
GPS北斗定位模块用户手册.doc说明书
GPS/北斗定位模块使用说明书文档版本：V1.2目录1.产品介绍 (3)1.1产品概述 (3)1.2功能特点 (3)1.3设备技术参数 (3)1.4产品选型 (3)2.设备使用说明 (4)2.1设备安装前检查 (4)2.2接口定义 (4)3.配置软件安装及使用 (5)3.1软件选择 (5)4.通信协议 (6)4.1通讯基本参数 (6)4.2数据帧格式定义 (6)4.3寄存器地址 (7)4.4通讯协议示例以及解释 (8)4.4.1读取设备地址0x01的定位状态 (8)4.4.2读取设备地址0x01的经度 (8)4.4.3修改地址 (9)5.联系方式 (10)6.文档历史 (10)附录：壳体尺寸 (11)1.产品介绍1.1产品概述我公司研发生产的GPS/北斗定位模块，是一款具有GPS定位和北斗定位的双模定位终端，可以快速、有效、精确定位位置。
GPS/北斗定位模块内含双模定位芯片，可快速定位位置，并且将定位信息以RS232/485接口和ModBus协议的方式提供给用户使用，并可以通过PC 机设置软件或串口命令轻松控制，使用方便快捷。
1.2功能特点同时支持GPS定位和北斗定位（北斗二号和北斗三号1-63号全部卫星）采用WGS84世界大地坐标系，精准定位经纬度信息可实时读取对地速度、对地航向、海拔高度等信息串口波特率自定义，支持1200~115200bps模块串口波特率等参数可通过PC机或串口命令配置RS232/485带TVS、过流等保护提供天线状态诊断，提供天线开路、短路等状态信息1.3设备技术参数供电DC7~30V功耗0.348W使用环境工作温度-20℃~+60℃，0%RH~95%RH非结露通信接口RS232/485接口可选；通信波特率：1200~115200可设天线接口接我公司提供的GPS+北斗双频天线定位精度 2.5m（CEP50）海拔高度典型精度：±10m对地速度<0.36km/h（1σ）1.4产品选型RS-公司代号GPSBDS-GPS北斗定位模块N01-RS485（ModBus-RTU协议）N02-RS232（标准RS232-DB9接口）1GPS北斗定位模块外壳2.设备使用说明2.1设备安装前检查设备清单■GPS北斗定位模块1台■产品合格证、保修卡等■GPS+北斗双频天线安装尺寸：Φ2.5mm88mm2.2接口定义序号标识说明1DC10-30V电源输入设备供电10-30VDC宽压供电2Ant北斗+GPS双频天线3通信设备485通信灯4运行设备运行灯5电源正电源输出正6电源负电源输出负7485A通信：485-A8485B通信：485-B注：通信灯在设备485通信时亮0.1s，设备运行灯正常工作（定位成功）时亮0.5s，熄灭0.5s，异常（未定位成功）时亮0.1s，熄灭0.9s，且模块只需要一端供电就可以正常工作，另一端电源是为后级供电而准备，如不对后级进行供电，可悬空。
GPS 车辆定位器用户手册说明书
User Manual（Version 2.1）1.AccessoriesThis user manual has been specially designed to guide you throughCharging cable (Standard)2.Specification3. Quick Operation InstructionsChange APN parameter by sending SMS “APN,666666,APN name#” and “SERVER,666666,1,,8821,0# ”to the device.3.1 Locate current position by GPRS/SMS3.2 GPS tracking platform:3.3 Track by time interval via GPRSSend SMS “TIMER,666666,,time(second)#” to device. 10s in minimum while 18000s(5 hours) in maximum.3.4 Change passwordThe default password is 666666. Send SMS “PASSWORD,old password (6 numbers),new password (6 numbers)#” to the device.3.5 Real-time Location Tracking via SMS3.5.1 Send SMS “WHERE,666666#” to the device, you will get the current location of the device.3.5.2 Send SMS “URL,666666#” to the device, you will get the URL of the current location by .4.My Device5. LED Indications6.Method of installation6.1 Preparation before installation1)Open the packing box to check whether the type of device is correct and whether the accessories are included.2)This product is a high-tech electronic device, installation should be undertaken by a professional.3)Please follow the following procedures to install your GT02A.During installation, there should be no power to the device.6.2 Installing SIM card: each GT02A need to insert a GSM SIM card. The SIM card used should be enabled for GPRS.1)Testing SIM card: to test SIM card, please install it into a normalGSM mobile and ensure it can send and receive SMS, and enables for GPRS.2)Installing SIM card:Remove the upper cover of device,insert SIM cardas shown then replace cover,lock the Shell With 3 bolts.6.3 Selecting installation place and fixing it.There are twokinds of installation: covert and non covert.If you need the covert installation, please refer installation to an auto electrical contractor.Note:1)To prevent theft of the GT02A,the device should be installed ascovertly as possible.2)Avoid placing the GT02A close to higher power electrical devices,such as reversing radar, anti-theft device or other vehiclecommunication equipment.3)The GT02A should be fixed into position with cable ties or widedouble-side tape.4)Your device has built-in GSM antenna and GPS antenna. During installation, please make sure the receiving side face is up, with no metal object above the device to interfere with GPS reception. The following places are suggested for installation:- Under the dash board below the front windshield;- In the parcel shelf in the rear;- In the front bumper( non-material face), please ensure the device cannot get wet;- Under the wiper version (non-metal), please ensure the device cannot get wet;Notice: If the windshield is pasted with metal thermal-protective coating, it may affect the performance of the device. In this case, please change the installation place after consulting the professional.5)Non Covert Installation,Firstly fix the device on the dash board below windshield.7. Cautions of device wiring7.1 The standard voltage is 9V-36V, the red wire is the positive, the black wire is the negative.7.2 Please connect the black wire to ground.7.3 After connecting the power cord, run the power cord plug to the device. After installation, supply power to device.7.4 Covert installation: car battery cord is standard, with 2A FUSE for short-circuit over current protection.7.5 Non covert installation: cigar lighter cord is optional, with 2A FUSE for short-circuit over current protection. Please contact your dealer if this mode is needed.8. Power on/ off8.1 The device will power on automatically when connected to power. During normal operation, red power LED flashes, while blue GPS LED and green GSM LED keep lighting. During signal searching process, GPS or GSM LED will flash. If there is no light presenting on LEDs, the device is not working normally.installation, please make sure the receiving side face is up, with no metal object above the device to interfere with GPS reception. The following places are suggested for installation:8.2 The device will power off after power is disconnected.9. Side key functionAt normal-work indication status, press the side key, all the three LEDs will extinguish and then the device will enter covert working mode. Press the key again, the three LEDs will go back to normal-work indication status.10. Troubleshooting10.1 If GPS can not receive the signals normally, please drive to the open areas for positioning. Generally, it needs 1-2 minutes to receive the first coordinates. If the data can not be received after 2-3 minutes, pleasecheck the installation position of the device, making sure it is not being shielded by any metal.10.2 If GSM can not receive the signals normally, please check whether SIM card is installed correctly or there is no GSM signal at the current location , such as a basement parking, please drive to a place covered by GSM signal.10.3 If the red LED does not work when power is connected, check whether the fuse is blown. If so, please replace the fuse.10.4 If the three LEDs do not turn on when power up, press the down side key, if the three LEDs recover normally, the device is working normally.10.5 If you have enabled the web based tracking application, and the device displays off-line on the platform, please check 3 LEDs status indicators first. You can check the status of the SIM card when you are in an inconvenient situation. Please refer to the following steps:1)Call the device to check whether you can get through.2)Check whether the SIM card supports GPRS and a local APN.3)Check the GSM/GPS reception area.4)Check whether there is enough credit on the SIM card.5)Check if the connector and terminal is loose or the fuse has blown out.11.SMS command。
北斗星二代GPS定位器使用说明书
GPS定位器使用说明书目录一、前言二、产品基本参数三、安装四、开始使用设备五、设备功能详解l短信功能5.1基本功能5.1.1获取位置信息5.1.2围栏5.1.3定时定位5.1.4断油电，通油电5.1.5 省电模式5.2防护模式5.2.1防盗报警5.2.2震动灵敏度设置5.2.3超速提醒5.3设备维护操作5.3.1设备重启5.4设备特殊参数设置5.4.1时区设置5.4.2数据通讯时间设置5.5其他功能l网络功能六、常见问题七、短信命令总表1一、前言非常感谢您使用本公司产品！该产品是本公司定位器系列中的一款新品。
该产品集GPS全球卫星定位系统、移动通信和因特网络平台于一体，性能稳定、精确、灵敏，使用方法简单，积小巧，便于安装与使用。
产品核心功能：本产品通过GPS 卫星定位系统，准确获取设备的地理位置，用户可通过手机短信及网络（电脑网络地址：www. ；手机网络地址/wap）来提取设备的地理位置信息，并对目标进行实时监控。
声明本公司对因用户的错误操作及不当维修所引起的个人数据资料丢失和意外损坏的情况不负任何责任，也不对由此造成的间接损失负责。
未经本公司授权许可，不得以任何形式或任何方式复制、传播、转录本手册的任何部分。
二、产品基本参数尺寸：40*58*14.5mm工作电压：DC: 6~30V工作环境：-25 ~ +80C(工作温度) 40% to 80% RH(工作湿度)频段：850/900/1800/1900MHzGPRS : class 12,TCP/IP.GPS: U-BLOX 7频率：L1, 1575.42 MHzGPS 敏感度：-159dBm定位精度：10m(2D RMS)工作电流：小于30MA,(12V). 小于20MA(24V)省电模式电流：4MA(12V)2三、安装1. 红线接电瓶电源正极6~30V DC2. 黑线接电瓶电源负极3. 黄线接继电器的86脚。
85接地。
继电器的30脚和87A串接在油泵线上.4. 绿线接ACC或者其他报警装置；可选作SOS键设备安放建议位置：AB3A B注：避免雨水淋湿，安装时设备一定要正面朝上，并且正上方不可有金属遮蔽物。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
GPS 使用说明
一、仪器的架设
1、打开三脚架及仪器盒，将脚架大致安平，将基准站和天线安装好，然后插线，天线带的线头插在电台下面（螺旋），将电瓶带的线头，单线头插在基准站蘑菇头下部（红点对准），将双线插在电台上端插口（红点对准），检查线头插接无误时，再将夹子夹在电瓶的两极（红色夹正极，蓝色插负极），检查无误后依次打开电台和基准站的电源。
二、仪器的连接与设置
1、打开
1、新建任务（如），选择西安80坐标系统；
2、保存任务；
3、打开新建的任务；
4、在文件中查看任务属性、当前坐标参数（取消“水平平差、垂直平差”的“√”；
5、在配置下找到手薄端口设置，打开选择蓝牙连接，先绑定基准站（＃＃＃＃＃＃61）；
6、测量下打开开启基准站接收机，进入界面后，在右下角点击断开；返回后在测量下再一次打开开启基准站接收机进行设置，输入点号(如1），用卷尺测量地面到基准站蘑菇头下沿的高度，在天线高度一栏填写测量的高度（如），选择天线底部，然后点击“此处”，然后点击下一步（不用修改如何设置），在然后确定，完成基准站连接；
7、在配置下找到手薄端口设置，打开选择蓝牙连接，绑定移动站（＃＃＃＃＃＃41）；
8、测量下打开开启移动站接收机，进入界面后，在右下角点击断开；返回后在
测量下再一次打开开启移动站接收机进行设置，按电台上面最上面的按钮打开通道，在手薄上选择的通道和电台打开的通道保持一致，然后下一步、下一步，完成移动站的连接。
三、点校正
1、在测量下打开测量点界面（地形点）将已知点的两点坐标进行测量（如A1、A2），在测量之前观察界面中的天线高度与移动站的天线高度是否保持一致，如果不一致就先将其调整成一致在进行测量；在键入下键入已知点坐标X、Y、H（注意将点号与原来测量的点号区分开，如JA1、JA2）；
2、在测量下最后一行找到“点校正”，打开点校正，点击左下角的增加，进入界面后点击第一行“...”，选择A1，再点击第三行”...”，选择JA1，点击右下角的确定，再选择增加，进入界面后点击第一行“...”，选择A2，再点击第三行”...”，选择JA2，然后点击“计算”，计算后选择确定、是，返回主界面；
3、在测量下打开测量点界面，测量（注意区分点号如A01）已知点A1或者A2,然后在文件下找到点管理器，打开点管理器，查看A01坐标与已知点A1坐标进行比较，点校正完成。
四、注意事项
1、测量完成后收拾仪器时，先将基准站、移动站、电台关机，再拔下电源线；
2、收拾仪器时检查是否将所有部件装箱；
3、测量回来后将仪器的电池进行充电，将有电的电池不要装在仪器内；
4、及时将数据在手薄上导出。