铝电解电容规格书

B41142 B41142
Recommended conditions
For reflow, use thermal conduction systems such as infrared radiation (IR) or hot blast. Vapor heat transfer systems (VPS) are not recommended.
B41142
Technical data and ordering codes
VR V DC
CR 120 Hz
20 °C µF
6.3 220 330 470 680
1000 1500
10 100 150 220 330 470 680
1000
16 100 150 220 330 470 680
25 100 150 220 330 470
6.3 × 7.7 8 × 10 8 × 10 8 × 10 10 × 10
6.3 × 7.7 8 × 10 8 × 10 8 × 10 10 × 10
tan δmax 120 Hz 20 °C
0.26 0.26 0.26 0.26 0.26 0.26
0.20 0.20 0.20 0.20 0.20 0.20 0.20
Delivery mode ■ Taped and reeled
Specifications and characteristics in brief
Rated voltage VR Operating temperature range Rated capacitance CR (20 °C, 120 Hz) Capacitance tolerance Load life (105 °C, VR)
Y
X
KAL1109-Z
Overview of available types
VR (V DC)
CR (µF) 47
100 150 220 330 470 680 1000 1500
6.3
10
Case dimensions d × l (mm)
6.3 × 7.7 6.3 × 7.7 8 × 10 8 × 10 8 × 10 10 × 10
Leakage current Ileak (20 °C, after 2 minutes) Low temperature stability (impedance ratio) (120 Hz)
Shelf life
Frequency multiplier for rated ripple current
Please read Cautions and warnings and Important notes at the end of this document.
5 08/08
SMD capacitors Mounting intructions SMD capacitors Mounting intructions Soldering
Ileak
≤
0.01
µA
⋅
⎛ ⎝
-C----R-µF
⋅
V--V---R- ⎠⎞
or
3
µA,
whichever
is
greater
VR (V DC) Z-Z----((--+–---2-2---50-----°°--CC-----))
6.3 10
2
2
16 25 35
2
2
2
-Z----(--–---4----0-----°---C-----) Z(+20 °C)
by sticking the thermo-couple to the capacitor upper part with epoxy adhesives. ■ Consult use for additional reflow restrictions.
[˚C ]
Time in peak temperature
Features
■ Very low impedance ■ RoHS-compatible ■ Load life of 3000 hours at 105 °C (∅ 6.3 × 7.7: 2000 hours)
Construction
■ Surface mounting device ■ Minus pole marking on the case
6.3 × 7.7 6.3 × 7.7 6.3 × 7.7 8 × 10 8 × 10 10 × 10 10 × 10
16
6.3 × 7.7 6.3 × 7.7 6.3 × 7.7 8 × 10 8 × 10 10 × 10
25
6.3 × 7.7 8 × 10 8 × 10 8 × 10 10 × 10
SMD capacitors Low impedance – 105 °C SMD capacitors LoLnogw-liifmepgeraddaencceap–a1ci0to5r°sC
B41142 B41142
Applications ■ Low impedance applications
35
47
100
150
220
330
Case
dimensions d×l mm
6.3 × 7.7 6.3 × 7.7 8 × 10 8 × 10 8 × 10 10 × 10
6.3 × 7.7 6.3 × 7.7 6.3 × 7.7 8 × 10 8 × 10 10 × 10 10 × 10
6.3 × 7.7 6.3 × 7.7 6.3 × 7.7 8 × 10 8 × 10 10 × 10
3 08/08
a
Y
SMD capacitors Low impedance – 105 °C
Layout recommendation
B41142
d × l (mm) 6.3 × 7.7 8.0 × 10.0 10.0 × 10.0
X
Y
a
1.6 3.5 2.1
2.5 3.5 3.0
2.5 4.0 4.0
300 300 300 600 600 850
300 600 600 600 850
300 600 600 600 850
Ordering code
B41142A2227M000 B41142A2337M000 B41142A2477M000 B41142A2687M000 B41142A2108M000 B41142A2158M000
■ Observe proper soldering conditions (temperature, time, etc.). ■ Do not exceed the specified limits. ■ Temperature measuring method: Measure temperature in assuming quantitative production,
B41142A5107M000 B41142A5157M000 B41142A5227M000 B41142A5337M000 B41142A5477M000
B41142A7476M000 B41142A7107M000 B41142A7157M000 B41142A7227M000 B41142A7337M000
Dimensional drawing d × l (mm) 6.3 × 7.7:
l±0.3
Bottom View 4
C±0.2
B41142
A±0.2
B±0.2
ød±0.5
0.5 max. E
A±0.2
_ +
_ +
1
0.3 max.
2
d × l (mm) 8 × 10 ... 10 × 10:
l±0.5
Aluminum electrolytic capacitors Alu-X product lines
SMD capacitors
Data Sheet Series/Type:
Date:
B41142 August 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication and the information contained therein without EPCOS’ prior express consent is prohibited.
300
Parts upper part temperature
200
160˚C
100
120 s
0
Time in 200˚C
or more Time [s]
Lead-free reflow
B41142A3107M000 B41142A3157M000 B41142A3227M000 B41142A3337M000 B41142A3477M000 B41142A3687M000 B41142A3108M000
B41142A4107M000 B41142A4157M000 B41142A4227M000 B41142A4337M000 B41142A4477M000 B41142A4687M000
A B C E H
6.3 × 7.7
2.4 6.6 6.6 2.2 0.5 … 0.8
8 × 10 10 × 10
2.9
3.2
8.3
10.3
8.3
10.3
3.1
4.5
0.8 … 1.1
Please read Cautions and warnings and Important notes at the end of this document.
50 Hz
120 Hz
300 Hz 1 kHz ≥10 kHz
0.35
0.50
0.64 0.83 1.00
Please read Cautions and warnings and Important notes at the end of this document.
2 08/08
SMD capacitors Low impedance – 105 °C
H 3
Bottom View 4
C±0.2
KAL1135-N
A±0.2
B±0.2
ød±0.5
0.5 max. E
A±0.2
1
0.3 max.
2
H
3
KAL113ቤተ መጻሕፍቲ ባይዱ-Y
➀ Case ➁ Terminal base board ➂ Minus pole ➃ Plus pole
Case dimensions d × l (mm)
35
6.3 × 7.7 8 × 10 8 × 10 8 × 10 10 × 10
Please read Cautions and warnings and Important notes at the end of this document.
4 08/08
SMD capacitors Low impedance – 105 °C
4
4
4
3
3
After storage for 1000 h at 105 °C, the capacitors shall meet the requirement of load life test after reforming process. Af-
ter test: VR to be applied for 30 minutes, 24 to 48 hours before measurement.
6.3 … 35 V DC –55 °C … +105 °C 47 … 1500 µF
±20% M
3000 h ∅ 6.3 × 7.7: 2000 hours
Requirements: ∆C/C ≤ ±30% of initial value tan δ ≤ 2 times initial specified limit Ileak ≤ initial specified limit
0.26 0.26 0.26 0.16 0.16 0.08
0.26 0.16 0.16 0.16 0.08
0.26 0.16 0.16 0.16 0.08
IAC,R 100 kHz 105 °C mA
300 300 600 600 600 850
300 300 300 600 600 850 850
0.16 0.16 0.16 0.16 0.16 0.16
0.14 0.14 0.14 0.14 0.14
0.12 0.12 0.12 0.12 0.12
Zmax 100 kHz 20 °C Ω
0.26 0.26 0.16 0.16 0.16 0.08
0.26 0.26 0.26 0.16 0.16 0.08 0.08