PL1200配料机英文说明书

PL1200 Series Concrete Batching
Machine
Instruction Book
Preface
Product instructions as our company delivery to users of an important component of the product, it will be introduced to the characteristics, function, working principle, technical performance, installation and commission , Operation, maintenance, machine fault processing and other aspects, with particular emphasis on the operator about protective measures for safety and environmental protection .
To be engaged in the equipment management, operation and repair personnel, this manual is essential read book, it can not only effectively help you to use the equipment and to bring the best economic benefit, But also can avoid the equipment damage and accident.
●Please strictly according to the specification of installation and operation!
●please be must use our company to provide or recommend equipment parts, to ensure that the the function of the equipment.
If the equipment happen series problems, please contact with our company.
The instruction with two copies, please be sure to keep a copy , in order to prevent the loss of
affect your work
Our company will be improve the machine step by step,, improve the content without advace notice, please understand this point.
Welcome to put forward valuable suggestions, thank you for your cooperation!
Contents
1.Product Introduction (1)
2.Technical Parameter (1)
3.Working Principle and Using (1)
4. Notice (2)
5. Ordering notice (3)
6. PL 1200 Series Concrete Batching Machine picture (picture1-picture 13)
1 Product Introduction
PL1200 series concrete batching machine is a kind of concrete mixing machinery supporting the use of automatic aggregate batching equipment.
The user can use requirements, a reasonable choose its types, specifications, to meet the needs of the construction.
The series of ingredients are in accordance with GB / T1017 - 2005"《concrete mixing plant (station )" in batching system technical standard. The machine adopts the electronic balance measurement, and centralized control, digital display, with the measurement high precision speed control performance, ingredients, strong, high reliability.
PL1200 series concrete batching machine has many kinds of types are available for users to select: batching machine has two bucket, three buckets and four bucket, a storage hopper capacity is 2. 5m³and 4m³, weigh type divided hopper measurement of belt weigh.
2 T technical parameters and Performance Index
2.1 Hopper measurement
2.2. Belt weigh
Note: Two-way belt scale batching mixer in batching machine two side, manual reversing ingredients.
3 Working Principle and Equipment Using
3.1 components
The series of ingredients by batching system, measurement system, electric control system is composed of three parts.
Batching system consists of a storage hopper, a bracket, the discharge gate, is the completion of the main storage, feeding and frame support ,A large storage hopper hopper for folding, easy to transport to the ground.
Measurement system is the equipment key component, by measuring hopper, belt machine and a sensor.
Measuring hopper through a pull rod hung on the frame, the total measurement sensor. Through the electric control system of automatic
Control of aggregate ( gravel, sand )of aggregate ( gravel, sand) measurement, reaches a set amount, manually or automatically by the weighing hopper bottom and belt conveyer to a lifting hopper mixer.
The electric control system is the core part of batching machine, realize the automatic production process, its structure and using
See " electrical control system installation and operation".
The batching machine used ZL30 series loader loading.
3.2 Installation of the Equipment
The operator should first read the instructions carefully, understand the equipment structure and performance, and then to make this machine detailed inspection, operation personnel appropriate training before the operation of induction, a forbidden to operate if not accept the training.
After the arrival of the goods at the packing list, inventory parts, technical documentation is complete, check whether the defect.
When in installation, Please uses a crane to hoist the entire device to the infrastructure in place, batching machine base adopts embedded steel plate,
Batching machine after the adjustment, with the leg plate welding machine with embedded steel plate welding firm. Frame aligning and fixing ,After leaving the metering hopper, hanging, installation of sensors, and is adjusted to the horizontal state, and ensure that the feeding height is appropriate, inspection
Check all parts are in normal condition.
The 3.3 Equipment using
According to the" electrical control system installation and operation" requirement, undertake overall debugging, and operation,
3.4 Equipment Maintenance
3.4.1 Check metering device is in working state before working.
3.4.2 Check the screening belt machine is normal, there is no deviation, trauma and foreign body before working.
3.4.3 Regularly check all electrical components are firm, grounding is good.
3.4.4 Equipment maintenance, should cut off the power, and a hand guard.
3.4.5 Periodic lubrication points of each part, regular replacement of gas source two CIS and electric drum gear oil (by gas
The source of the two CIS and electric drum random specification. ).
4 Notice:
4.1 During the using of the process, you should always pay attention to: whether the deviation of belt machine, such as a deviation, whole road system; whether there is leakage phenomenon, such as leakage, should be repaired in time.
4.2 To avoid sand, stone into the belt machine operation of the site.
4.3 Please clear the bottom material of Batching machine,and measuring hopper adhesion timely clearance; mixer supporting the use, to
The pit falls the material or product should be the timely removal of material.
4.4 Installation of equipment, all piping shall be properly placed, avoid the work being crushed or injury.
4.5 batching machine is not a long time, release the sensor rod, so that the sensor is not force, to protect the sensor.
4.6 Batching machine transfer site, after loading the sensor bar open, metering bucket is fixed solid can be transported.
4.7 Batching machine in the process of use, Please be strictly prohibited in the measuring hopper welding articles, or easy to burn sensor.
4.8 After using of Batching machine, please clear the measuring hopper sand, stone unloading hopper, long-term gravity vulnerability will be bad sensor.
5 Order Notice:
5.1 Please be understand the technical characteristics of equipment and ancillary products.
5.2 Please be understand the equipment factory products list.
The 5.3 Shipment should be safety first, reliable, the delivery unit should be closed fixed, should not return string.
Important Notice
Please read the instructions carefully before use, and strictly follow the instructions about the operation, repair and maintenance, and special attention
To the following matters:
1, Please be strictly implementation of national and local laws and regulations related to safety, Laws, and other.
2,Please be regularly add lubrication points of each parts, regular replacement of electric drum gear oil.
3, According to the provisions before switching on belt conveyor are examined, with no running partial phenomenon.
4, Regularly check the belt wear, if necessary, timely replacement.
5 To prevent the occurrence of personal accidents ，prohibited personnel stand machine belt..
6 To prevent the occurrence of electrical accident,the electrical equipment should be in strict accordance with the provisions of grounding.。