毕业设计-220kV变电站电气主控制系统二次回路设计
合集下载
相关主题
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
1.3.2信号回路3
1.3.3测量回路3
1.3.4调节回路3
1.3.5继电保护操作型自动装置回路3
1.3.6操作电源系统3
1.4对二次回路的基本要求3
1.4.1对控制回路的基本要求4
1.4.2对测量回路的基本要求5
1.5二次回路的发展简史及展望5
1.5.1就地分散控制5
1.5.2电气集中控制6
1.5.3单元控制6
1.5.4综合控制6
第二部分正文7
1断路器控制回路7
1.1变电站断路器控制方式7
1.1.1变电站断路器控制方式7
1.1.2强电控制方式的主要类型8
1.1.3解释几种LW2型断路器操作开关的接点形式9
1.2对断路器控制回路的要求9
1.3断路器控制回路方案பைடு நூலகம்较10
1.3.1配以弹簧操动机构的断路器控制电路10
关键词：变电站,电气主接线,电气设备,防雷保护等。
Abstract
This paper introduced the buck, Commissioner of 220 kV electric substation of the preliminary design, design tasks from the point of view, is divided into seven steps. That is, 1, choice of the main transformer substation of the models, capacity and number of Taiwan. 2, the design of the electrical substation main connection of the basic form. 3, a short-circuit current calculation. 4, a major electrical equipment choice. 5, the high-voltage power distribution substation planning and design of the devices. 6, the substation protection and automatic devices of the planning and design. 7, Lightning Protection of the substation planning and design, such as seven steps, this paper with the electrical design on a point of order. The design is in school during the last a very important part of a comprehensive practice teaching, but also full use of our students have learned basic theories, professional knowledge to practical problems to design (or research) integrated training, is also our future
2.5继电保护配置符号19
2.6本变电站的保护配置20
2.6.1变压器保护装设的原则20
2.6.2瓦斯保护20
2.6.3纵差动保护21
2.6.4变压器的相间故障后备保护23
摘
本论文介绍了文关220kV降压变电站电气部分初步设计，从设计任务上来看，共分为七大步骤。即，1、电气控制方式选择及确定。2、互感器回路设计。3、主断路器控制及信号回路设计。4、变电站继电保护配置设计。5、进行本变电站高压配电装置的规划设计。6、进行本变电站继电保护设计。7、变电站自动装置配置设计等七大步骤，本论文结合电气的有关规程进行设计。本次设计是我们在校期间进行的最后一个非常重要的综合性实践教学环节，也是我们学生全面运用所学基础理论、专业知识对实际问题进行设计（或研究）的综合性训练，同时还是我们将来走向工作岗位而奠定的基本实践。通过本次设计可以增强我们运用所学知识解释实际问题的能力和创新能力，以便更好地适应工作的需要。其设计内容结合相关的参考文献进行编写，由于水平有限，难免会有错误疏漏之处，请参阅老师多给予批评指正。
1.3.2配以电磁式操作机构的断路器控制电路11
1.3.3配以CY3液压操作机构的断路器控制电路13
1.4 220kV变电站主变压器断路器控制回路14
2变电站继电保护配置17
2.1总则17
2.2一般规定18
2.3安全自动装置18
2.3.1一般规定18
2.3.2自动投入装置18
2.4继电保护的配置19
Jobs and to lay the basic practice. Through this design can be enhanced by the knowledge we use to explain the actual capacity and ability to innovate in order to better meet the needs of their work. The design elements associated with the reference to the preparation, the limited level, it is inevitable there will be errors of omission, please refer to the teacher to give more criticism correction.
Keyword:substations, the main electrical wiring and electrical equipment, mine protection.
摘要I
AbstractII
第一部分引言1
1.1变电站概况1
1.2二次回路的作用2
1.3二次回路的分类和组成2
1.3.1控制回路2
1.3.3测量回路3
1.3.4调节回路3
1.3.5继电保护操作型自动装置回路3
1.3.6操作电源系统3
1.4对二次回路的基本要求3
1.4.1对控制回路的基本要求4
1.4.2对测量回路的基本要求5
1.5二次回路的发展简史及展望5
1.5.1就地分散控制5
1.5.2电气集中控制6
1.5.3单元控制6
1.5.4综合控制6
第二部分正文7
1断路器控制回路7
1.1变电站断路器控制方式7
1.1.1变电站断路器控制方式7
1.1.2强电控制方式的主要类型8
1.1.3解释几种LW2型断路器操作开关的接点形式9
1.2对断路器控制回路的要求9
1.3断路器控制回路方案பைடு நூலகம்较10
1.3.1配以弹簧操动机构的断路器控制电路10
关键词：变电站,电气主接线,电气设备,防雷保护等。
Abstract
This paper introduced the buck, Commissioner of 220 kV electric substation of the preliminary design, design tasks from the point of view, is divided into seven steps. That is, 1, choice of the main transformer substation of the models, capacity and number of Taiwan. 2, the design of the electrical substation main connection of the basic form. 3, a short-circuit current calculation. 4, a major electrical equipment choice. 5, the high-voltage power distribution substation planning and design of the devices. 6, the substation protection and automatic devices of the planning and design. 7, Lightning Protection of the substation planning and design, such as seven steps, this paper with the electrical design on a point of order. The design is in school during the last a very important part of a comprehensive practice teaching, but also full use of our students have learned basic theories, professional knowledge to practical problems to design (or research) integrated training, is also our future
2.5继电保护配置符号19
2.6本变电站的保护配置20
2.6.1变压器保护装设的原则20
2.6.2瓦斯保护20
2.6.3纵差动保护21
2.6.4变压器的相间故障后备保护23
摘
本论文介绍了文关220kV降压变电站电气部分初步设计，从设计任务上来看，共分为七大步骤。即，1、电气控制方式选择及确定。2、互感器回路设计。3、主断路器控制及信号回路设计。4、变电站继电保护配置设计。5、进行本变电站高压配电装置的规划设计。6、进行本变电站继电保护设计。7、变电站自动装置配置设计等七大步骤，本论文结合电气的有关规程进行设计。本次设计是我们在校期间进行的最后一个非常重要的综合性实践教学环节，也是我们学生全面运用所学基础理论、专业知识对实际问题进行设计（或研究）的综合性训练，同时还是我们将来走向工作岗位而奠定的基本实践。通过本次设计可以增强我们运用所学知识解释实际问题的能力和创新能力，以便更好地适应工作的需要。其设计内容结合相关的参考文献进行编写，由于水平有限，难免会有错误疏漏之处，请参阅老师多给予批评指正。
1.3.2配以电磁式操作机构的断路器控制电路11
1.3.3配以CY3液压操作机构的断路器控制电路13
1.4 220kV变电站主变压器断路器控制回路14
2变电站继电保护配置17
2.1总则17
2.2一般规定18
2.3安全自动装置18
2.3.1一般规定18
2.3.2自动投入装置18
2.4继电保护的配置19
Jobs and to lay the basic practice. Through this design can be enhanced by the knowledge we use to explain the actual capacity and ability to innovate in order to better meet the needs of their work. The design elements associated with the reference to the preparation, the limited level, it is inevitable there will be errors of omission, please refer to the teacher to give more criticism correction.
Keyword:substations, the main electrical wiring and electrical equipment, mine protection.
摘要I
AbstractII
第一部分引言1
1.1变电站概况1
1.2二次回路的作用2
1.3二次回路的分类和组成2
1.3.1控制回路2