锂电池规格书
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
储能型磷酸铁锂电池规格书STORAGE LiFePO4 BATTERY SPECIFICATIONS
客户名称(Customer):
产品型号(Type): CF12V80Ah
发行日期(Issuing Date):
1. 适用范围(Product Scope)
本规格书描述了锂离子二次电池的技术要求、测量方法、运输、储存及注意事项。
This Specification describes the requirements of the lithium ion rechargeable battery supplied by
2. 电池组特性 (Battery Group Specifications)
Management system 管理系统Single cell over-charge cut-off
voltage
单只过压保护值
3.9V
Charge Working voltage过压释放值 3.8V
Single cell under-discharge cut-off
voltage单只欠压保护值
2.3V
Discharge working voltage欠压释放
值
2.7V
Conditions of over-charge and
under-discharge voltage recovery
过、欠压恢复条件
With the high-point voltage reaching the working
voltage 极限电压达到释放值
Over-charge cut-off current 过流保护
值
80A
Short-circuit protection 短路保护Own this ability 具备此功能Condition for the recovery of
over-current and short-circuit
protection 过流\短路保护恢复条件
Cut the circuit to automatic recovery
断开负载自动恢复
单只电芯曲线图feature curve for single cell
3. 技术要求(Technical Requirements)
3.1测试条件(除特别规定) Testing Conditions (unless otherwise specified)
温度Temperature: 15~35℃
相对湿度Relative Humidity: 45%~75%
大气压Atmospheric pressure: 86~106Kpa
3.2充放电性能 (Electrical Characteristics)
3.3环境性能 (Environmental Characteristic)
3.4机械性能(Mechanical characteristics)
3.5安全性能(Safe Characteristic)
After standard charge,the battery located in a fume
hood is to be short-circuited by connecting the
positive and negative terminals with an external
load of less than 50 mΩ till the battery case
temperature has returned to near ambient
temperature.
将标准充电后的电池置于通风橱中,短路其正负极(线
路总电阻不大于50m),实验过程中监视电池温度变
化,当电池温度下降到接近初始室温时,结束实验
4 电池组基本性能 (Basic Characteristics of Battery)
<400 m
5 电池组保护功能要求 (Battery Required Protection Functions)
To insure the safety, charger and the protection circuit shall be satisfied the items below.
As safety device, please use in combination with the temperature fuse. The standard charge method is CC/CV (constant current/constant voltage)
为确保安全,充电器和保护电路应符合以下要求。同时请使用装有热熔保险丝的安全装置。标准充电方法为CC/CV(恒流/恒压)
5.1 参数(product Specification)
6 保质期限及产品责任WARRANTY PERIOD & PRODUCT LIABILITY
Warranty period of this product is 24 months from manufacturing code.
保质期是从出厂日期(喷码)开始起二十四个月.
CHINENG is not responsible for the troubles caused by mishandling of the battery which is clearly against the instructions in this specification.
池能公司对因没有按本规格书规定操作而导致的意外不负责任
When CHINENG finds any new facts which require modification of this document, we will inform you again.
一旦池能公司发现本规格书有新的修改细节,我们将再告知。
7 包装电池上的标示INDICATIONS ON BATTERY PACK
The following warnings should be indicated on the battery packs.
以下警告应注明在包装后的电池上
•Use a specified charger.
使用规定的充电器
•Do not throw the battery into fire, or heat.
不要将电池投入火中或加热
•Do not short-circuit the battery terminals
不要将电池两端短路
•Do not disassemble the battery.
不要将电池分解拆散
8 电池使用时警告事项及注意事项
WARNINGS AND CAUTIONS IN HANDLING THE Lithium-ion BATTERY
To prevent a possibility of the battery from leaking, heating or explosion please observe the following precautions:
为防止电池可能发生泄漏,发热、爆炸,请注意以下预防措施: