Video Display Formats
Philips 81厘米（32英寸）Pixel Plus HD LCD HDReady电视机 32P
Philipswidescreen flat TV with Pixel Plus HD81 cm (32")LCDHD Ready32PFL5332Turn up your viewing experiencewith Pixel Plus HDExperience the superior picture quality of this excellent HD Ready TV with the latest LCD technology and Pixel Plus HD. It's packed into a stunning design that will complement your interior.Vivid, natural and razor sharp images•HD LCD WXGA display, with a 1366 x 768p resolution •Pixel Plus HD for better details, depth and clarity•Dynamic contrast enhancer delivering rich black details•Active Control optimizes picture quality whatever the source Exciting and lifelike sound•Incredible Surround™ for enhanced audio enjoyment Slim, stylish design to complement your interior •Compact and slim design that fits in every room •Matching design swivel stand includedDesigned for your convenience•PC input lets you also use your TV as a PC monitor For advanced performance•2 HDMI inputs for full digital HD connection in one cableHighlightsLCD WXGA display, 1366 x 768pThis WXGA display with state-of-the-art LCD screen technology gives you widescreen HD resolution of 1366 x 768p pixels. It produces brilliant flicker-free progressive scan pictures with optimum brightness and superb colors. This vibrant and sharp image will provide you with an enhanced viewing experience.Pixel Plus HDPixel Plus HD is a picture processing technology that enables viewers to watch content that is vivid, natural, and real. The result means superbly life-like pictures with incredible details and depth from any HD source.Dynamic contrast enhancerYou want the LCD flat display with the highest contrast and most vibrant images even at wide viewing angle. The Philips dynamic contrast enhancer uses video processing and unique dimming backlight technology. This delivers deep rich black levels with increased detail. The dimming backlight increases the contrast up to 5 times*, and at the same time improvesthe viewing angle. It gives a bright, lifelikepicture with high contrast and vibrant colors,(* factor between 2 and 5, screen type andpicture content dependant).Active ControlActive Control ensure that noise andsharpness improvements are continuouslymade at a rate of 60 times per second. Bycontinually adjusting picture setting over 3,000times per minute, Active Control Plus ensuresthat the viewing experience is optimized.Incredible Surround™Incredible Surround is an audio technologyfrom Philips that dramatically magnifies thesound field to immerse you in the audio. Usingstate-of-the-art electronic phase shifting,Incredible Surround mixes sounds from leftand right in such a way that it expands thevirtual distance between the two speakers.This wider spread greatly enhances the stereoeffect and creates a more natural sounddimension. Incredible Surround allows you toexperience total surround with greater depthand width of sound, without the use ofadditional speakers.2 HDMI inputsHDMI makes an uncompressed digital RGBconnection from the source to the screen. Byeliminating conversion to an analog signal, itdelivers an unblemished image. The non-degraded signal reduces flicker and leads to aclearer picture. HDMI intelligentlycommunicates the highest output resolutionwith the source device. The HDMI input is fullybackward compatible with DVI sources butincludes digital audio. HDMI uses HDCP copyprotection. With 2 HDMI inputs you canconnect multiple HD sources, for instance anHD settop box, and a Blu-ray player. Your TVis fully prepared for the HD future.PC inputWith PC input you can connect your TV to acomputer and use the TV as a PC monitor.Issue date 2019-06-28Version: 3.0.1112 NC: 8670 000 30989EAN: 87 12581 34200 5© 2019 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.SpecificationsPicture/Display •Color cabinet: Black Cabinet with Black Hi Gloss Deco Frame•Aspect ratio: Widescreen, 16:9•Brightness: 500 cd/m²•Dynamic screen contrast: 4000:1•Response time (typical): 8 ms•Viewing angle (H / V): 178 / 178 degree •Diagonal screen size: 32 inch / 81 cm•Display screen type: LCD WXGA Active Matrix TFT•Panel resolution: 1366 x 768p•Picture enhancement: Pixel Plus HD, Luminance Transient Improver, Dynamic contrastenhancement, Contrast Plus, 3/2 - 2/2 motion pull down, 3D Combfilter, Active Control, Digital Noise Reduction, Jagged Line Suppression, Progressive scan•Screen enhancement: Anti-Reflection coated screenSupported Display Resolution•Computer formatsResolutionRefresh rate 640 x 480 60, 72, 75, 85Hz 720 x 400 70Hz 1024 x 768 60, 70, 75, 85Hz •Video formats Resolution Refresh rate 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50, 60Hz 1080i 50, 60HzSound•Equalizer: 7-bands•Output power (RMS): 2 x 10W•Sound Enhancement: Auto Volume Leveller, Incredible Surround•Sound System: Stereo, SAPLoudspeakers•Built-in speakers: 2•Loudspeaker types: Front Speakers, Dome tweeterConvenience•Child Protection: Child Lock•Clock: On main display, Sleep Timer, Wake up Clock•Ease of Installation: Auto Program Naming, Autostore, Fine Tuning, Program Name, Sorting •Ease of Use: 8 channel smart surf list, Auto Volume Leveller (AVL), AutoPicture, AutoSound, Program List, Side Control, Closed Captioning Full Text •On-Screen Display languages: English, Portuguese, Spanish•Remote Control: TV•Remote control type: RC2023606/01•Screen Format Adjustments: 4:3, Movie expand 14:9, Movie expand 16:9, Subtitle Zoom, Super Zoom, WidescreenTuner/Reception/Transmission•Aerial Input: 75 ohm F-type•TV system: NTSC, PAL N, PAL M•Video Playback: NTSC, PAL (all versions)•Tuner bands: Hyperband, S-Channel, UHF, VHF •Number of Preset Channels: 125•Tuner Display:PLLConnectivity•AV 1: Audio L/R in, YPbPr •AV 2: Audio L/R in, YPbPr•AV 3: Audio L/R in, CVBS in, S-Video in •AV 4:HDMI •AV 5:HDMI•Number of AV connections: 7•Front /Side connections: Audio L/R in, CVBS in, Headphone Out, S-video in•Other connections: Monitor out, CVBS, L/R (cinch), PC Audio in, PC-In VGAPower•Ambient temperature: 5 °C to 40 °C •Mains power: 100-240V, 50/60Hz •Power consumption: 150 W•Standby power consumption: <1WAccessories•Included accessories: Tabletop swivel stand, Power cord, Quick start guide, User Manual, Registration card, Warranty certificate, Remote Control, Batteries for remote controlDimensions•Set dimensions (W x H x D): 805 x 547 x 116 mm •Set dimensions with stand (W x H x D): 805 x 609 x 212 mm •Product weight: 14.2 kg•Product weight (+stand): 17 kg •Box dimensions (W x H x D): 870 x 630 x 290 mm•Weight incl. Packaging: 23 kg•VESA wall mount compatible: 200 x 100 mm。
数位媒体心介面掘起 揭开HDMI的神秘面纱
數位媒體心介面掘起揭開HDMI的神秘面紗2003年，數位影像介面(DVI)獲得全面採用，成為數位電視(DTV)與高解析度視訊解碼器(HD STB)等數位消費性電子產品的必備介面。
2003年底，市面上共有超過500種採用DVI連接器的消費性電子產品；同樣在2003年，美國市場上銷售的數位電視約80%具有DVI連接器。
此外，2003年也是HDMI崛起的一年。
HDMI(High Definition Media Interface)是唯一能以單一連接器傳收未經壓縮的高畫質視訊與多軌道音訊之消費性數位電子產品介面。
HDMI的設計與DVI完全相容，能完全符合消費性電子產品市場的需要。
HDMI亦提供智慧型連結，以及功能更強大且容易使用的連接器。
HDMI正快速成為連接HDTV的標準，並預期能在2004年取代DVI，成為數位介面的首選。
有鑑於DVI-HDCP在電視市場的成功經驗，消費性電子產品製造者體會到有必要發展更先進的數位介面，以持續數位電視在21世紀的發展。
這項新介面的預期目標包含，能傳收影音訊號與控制資料的單一介面；支援SDTV與HDTV影像格式與色彩空間(color-space)；支援目前所有多軌道音訊的高品質數位音訊格式；自動偵測裝置與內容格式的智慧型連結；更小且更容易使用的連接器。
2002年組織成立現已發表HDMI 1.1版2002年4月，HDMI工作組織(HDMI Working Group)正式成立，成員包含日立(Hitachi)、Panasonic、飛利浦(Philips)、美商晶像(Silicon Image)、新力(Sony)、Thomson與東芝(Toshiba)。
該組織致力為消費性電子產品定義出下一代數位介面規格。
HDMI是以DVI 的成功經驗為基礎，在能全面回溯相容的同時，亦能提供新功能。
HDMI 1.0的規格在2002年12月正式公佈，而2003年7月則公佈1.0版的HDMI相容性與測試規格(HDMI Compliance and Test Specification, CTS)。
Philips 20PFL3403S LCD TV操作手册说明书
PhilipsLCD TV with Crystal Clear III51 cm (20")20PFL3403SClearly the smart choiceDesigned for ease of use, this Flat TV features modern design, HDMI connection, a powerful and brilliant Crystal Clear III engine. Making the smart choice in total picture quality has never been easier.Superb picture quality•Crystal Clear III for natural images with enhanced quality •LCD display, 640 x 480p•HD Ready for the highest quality display of HD signals Hear crisp and clear sound•Incredible Surround for enhanced audio enjoyment Connect, install and enjoy•HDMI input for full digital HD connection in one cable •PC-input allows you to use your TV as a PC monitor•Smart Picture and Smart Sound to personalize your viewingIssue date 2019-06-27Version: 2.0.712 NC: 8670 000 37275EAN: 87 12581 39756 2© 2019 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective SpecificationsLCD TV51 cm (20")HighlightsCrystal Clear IIICrystal Clear III combines a whole range of enhancements to provide a better picture. They include a 2D Comb filter, Dynamic contrast, Blue stretch and Green enhancement so that you always get the most natural looking colors.LCD display, 640 x 480pLCD display, 640 x 480pHD ReadyEnjoy the exceptional picture quality of High Definition pictures and be fully prepared for HD sources like HDTV settop box or Blu-ray disc. HD Ready is a protected label that offers picture quality beyond that of progressive scan. It conforms to strict standards laid out by EICTA to offer a HD screen that displays the benefits of resolution and picture quality of a High Definition signal. It has a universal connection for both analog YPbPr anduncompressed Digital connection of DVI or HDMI, supporting HDCP. It can display 720p, and 1080i signals at 50 and 60Hz.Incredible SurroundIncredible Surround is an audio technology from Philips that dramatically magnifies the sound field to immerse you in the audio. Using state-of-the-art electronic phase shifting, Incredible Surround mixes sounds from left and right in such a way that it expands the virtual distance between the two speakers. This wider spread greatly enhances the stereo effect and creates a more natural sound dimension. Incredible Surround allows you to experience total surround with greater depth and width of sound, without the use of additional speakers.HDMI inputHDMI makes an uncompressed digital RGB connection from the source to the screen. Byeliminating conversion to an analog signal, it delivers an unblemished image. The non-degraded signal reduces flicker and leads to a clearer picture. HDMI intelligently communicates the highest outputresolution with the source device. The HDMI input is fully backward compatible with DVI sources but includes digital audio. HDMI uses HDCP copy protection.PC input (VGA)With PC input you can connect your TV to a computer by a VGA cable and use the TV as a PC monitor.Smart Picture and Smart SoundPhilips preset modes for Smart Picture and Smart Sound provide you with direct access via a single key on the remote control. You can select optimized picture and sound settings for the various pictureand sound modes.Picture/Display•Aspect ratio: 4:3•Brightness: 300 cd/m²•Contrast ratio (typical): 800:1•Response time (typical): 12 ms •Viewing angle: 178º (H) / 178º (V)•Diagonal screen size: 20 inch / 51 cm•Display screen type: LCD VGA Active Matrix TFT •Panel resolution: 640 x 480p•Picture enhancement: Crystal Clear III, 2D Combfilter, 3/2 - 2/2 motion pull down, White stretch, Progressive scan, Smart Picture•Screen enhancement: Anti-Reflection coated screenSupported Display Resolution•Computer formats Resolution Refresh rate 640 x 480 60Hz •Video formats Resolution Refresh rate 480i 60Hz 480p 60Hz 576i 50Hz 576p 50HzSound•Output power (RMS): 2 x 3W•Sound Enhancement: Auto Volume Leveller, Incredible Surround, Smart Sound •Sound System: Mono, StereoConvenience•Clock: Sleep Timer, Start timer, Stop timer •Ease of Installation: Auto Program Naming,Automatic Channel Install(ACI), Automatic Tuning System (ATS), Autostore, Fine Tuning, Plug & Play •Ease of Use: Auto Volume Leveller (AVL), On Screen Display, Program List, Side Control, Smart Picture, Smart Sound•Picture in Picture: Text dual screen •Remote Control: TV•Remote control type: RC5•Screen Format Adjustments: 4:3•Teletext: 100 page Smart TextTuner/Reception/Transmission•Aerial Input: 75 ohm coaxial (IEC75)•TV system: PAL I, PAL B/G, PAL D/K, SECAM B/G, SECAM D/K, SECAM L/L'•Video Playback: NTSC, SECAM, PAL•Tuner bands: Hyperband, S-Channel, UHF, VHFConnectivity•Ext 1 Scart: Audio L/R, CVBS in/out, RGB•Ext 2: YPbPr in, CVBS in, Audio L/R in •Ext 3: S-video in •Ext 4: HDMI•Other connections: Headphone out, PC Audio in, PC-In VGAPower•Ambient temperature: 5 °C to 35 °C •Mains power: 100-240V,50/60Hz •Power consumption: 45 W•Standby power consumption: <0.3 WDimensions•Set dimensions (W x H x D): 470 x 406 x 71 mm •Set dimensions with stand (W x H x D): 470 x 448 x 205 mm•Weight incl. Packaging: 9.7 kg •Product weight: 5.8 kg•Product weight (+stand): 6.7 kg •Box dimensions (W x H x D): 572 x 500 x 225 mm•VESA wall mount compatible: 100 x 100 mmAccessories•Included accessories: Table top stand, Power cord, Quick start guide, User Manual, Warrantycertificate, Remote Control, Batteries for remote control。
HWT-DEC808网络矩阵8通道HDMI输出说明书
HWT-DEC808Network Matrixwith 8ch HDMI outputFeaturesSpecificationsModel work Matrix with 8ch HDMI output Module or Interface Input none Output 8ch HDMI output Ethernet 100M/1000M self adaptive Audio input 4ch ，by Ф3.5 audio interface Audio output 4ch ，by Ф3.5 audio interface Alarm output support network alarm input USB2.0support RS232/422/485support VideoNetwork videodecodingH.265,H.264Network videoinput4K, 1080P,1080I,720P,D1HDMI ouput resolution 1024×768P@60hz,1280×720P@60hz,1366×768P@60hz,1920×1080P@60hz,3840×2160@60hz Video decodeand display8ch 4K or 64ch 1080P or 128ch 720P or 256ch D1Monitor splicing 8 monitor to splice and display one videoSplitmaximum 64 split,1/4/6/8/9/10/16/25/36/64 splittingmode and display ，or split by user-define.OSD Window, Channel,label, alarm, etc. information AudioAudio Codec G.711,G.726,ADPCM encode/decode On/Mute Supports all channels and single channel set individually Audio input 4ch audio encode, it can open/close audio input.Management and MaintenanceBasic applications maximum 72users online at same timeusers permission definition ；video switch and control Cruise, patrol, split,etc.display mode management, Planconfiguration and call.Management &ConfigurationPETNET protocol available, third party Net client orplatform can configure and manage this matrix on usersoperation permission definition & managementMaintenancesystem log , System status detection,Fault detection andreport, support online updatingInitialization set it can configure accordingly.Othertimesynchronization interior RTC, it could time automatic sync.in cascading .PENET or standard port, to keep sync. to time serverinside the system.Alarm network alarm input, alarm action to call video display Alarm process manual or automatic Power supply AC100 to 230Consumption ≤96W Working temp.0～45℃Workinghumidity 10%～90%Weight Gross/net weight: 6.5kgs/4.5kgsDimensioncarton size: 580.0mm(L)×540.0mm(W)×160.0mm(H)product size:482.0mm(L)×371.3mm(W)×44.0mm(H)In generalHWT-DEC808 Network matrix is with 8ch hdmi output,can decode stream of onvif/H265/264 & RTSP, etc.from ip camera or platform, restore HD signal and display on monitors, perfect video wall management, including split, splicing, PIP, Plan, Cruise, etc.simple operation likeanalog system.Besides it offers audio codec, alarm action, etc. functions for multiple applications.Dimension◼Support network media input ；◼Support multiple resolution of output, it can manually set output resolution ；◼Output supports maximum 3840x2160@60Hz ；◼Support 4K,1080P ,1080I,720P ,D1video formats ；◼H265/H264compatible ；◼Support 8ch 4K or 64ch 1080P or 128ch 720P decoding and display ；◼Support video-splitting output,up to 64windows split on one monitor ；◼Support Cruise,Plan,split,splicing,etc.display mode ；◼Support Plan configuration and management ；◼Optimize video ，it can make video stream smooth andimprove network jammed . ◼Support intelligent connection ；◼Support audio input and output◼Support alarm linkage action and contact closure output ；◼Support OSD, title, time and warning messages canoverlap on the displayed video ；◼Support multiple label program, can configure labelposition freely；。
EShare 2020用户手册说明书
User Manual Eshare2020ContentsUser Manual (1)1. About ESHare (4)1.1 Main Features (4)1.2 Feature List (5)1.3 Client Requirements (6)1.4 Network Requirements (6)ESharePro (6)AirPlay/iMirror (6)2. EShare APP GUIDe (7)2.1 Download THE EShare APP (7)2.2 Guide for Android Client Devices (7)2.2.1 Connect to the Large Display (7)2.2.2 File Sharing (8)2.2.3 Share Screen (9)2.2.4 Full-Screen (10)2.2.5 TV Mirror (11)2.2.6 Wireless Annotations (11)2.2.7 Camera (11)2.2.8 Remote Control (12)2.2.9 Share Files from Other APPs to Large Display (12)2.3 Guide for Windows/macOS/Chrome OS/Ubuntu Client Devices (13)2.3.1 Connect to the Large Display (13)2.3.2 Share Screen (13)2.3.3 TV Mirror (14)2.3.4 Wireless Annotations (15)2.3.5 Full Screen (15)2.3.6 Invitation for Mirroring (16)3. Guide for ESharePro (17)3.1 Multiple Screens (17)3.1.1 Multiple Screens Settings (17)3.1.2 Multiple Screens Display (17)3.1.3 Switch the Audio Output Source (18)3.1.4 Full-Screen or Multiple Screens (18)3.2 Display Group Settings (19)3.2.1 Display Group Settings (19)3.2.2 Share Screen to the Display Group (19)3.3 Moderator Mode (20)3.3.1 Options for “Share Screen” (21)3.3.2 Options for “View,Control and Wireless Annotation” (21)3.3.3 Other Options in Moderator Control Center (22)4. Technical SUPPORT (24)1. ABOUT ESHAREEShare is a set of multi-screen interactive software applications designed for sharing, wireless display and remote control between mobile devices (such as phones, tablets, laptops, etc.) and large displays.1.1 MAIN FEATURES● File sharing: share any file (such as audio, video, photo, office document, PDF, e-book, APK, etc.) from a mobile phone or tablet to large displays.● Remote control: supports wireless control via wireless mouse, air mouse, keyboard, touchpad, remote controller, etc.●Wireless camera and microphone: share the images or audio from your phone camera or microphone to the large display in real-time.● TV Mirror: mirror the large display to the client device, and touch to control the large display via the client device.● Mirroring: mirror the client device screen (such as iPhone, iPad, Android device, MacBook, Chromebook, Windows PC and Ubuntu PC, etc.) to the large display or projector, and touch to control client devices from the large display without touch control cable, VGA or HDMI.● AirPlay: share images, audio, videos, screen of iPhone or iPad to the large display with the feature of “Screen Mirroring” of iPhone or iPad.● DLNA: support any client APP compatible with DLNA protocol.● Wireless annotations: annotate the large display via phone in real-time inside the TV mirror function.● Multiple screens: share multiple device screens to a large display at the same time, and the screen of the large display will be split automatically.● Display group: users can share their screen from one client device to multiple large displays wirelessly.● Moderator control mode: the moderator can control the client devices for screen sharing, TV Mirror, wireless annotations, full-screen display, etc.1.2 FEATURE LISTFeature Description Video All popular video formatsAudio All popular video formatsImages Share images Real-time scaling RotateDocuments All Office documents PDF and othersRemote control Wireless mouseAir mouseWireless keyboard (supporting the input methods of voice, writing...)Wireless touchpadCommon keys (Home, Menu, Back, Vol+/-, etc.) Application list of large displayCamera Wireless cameraWireless annotations Annotate the large display via phone in real-timeTV mirror Mirror the large display to phone or laptop, and touch on the client device to control the large display wirelesslyiOS mirroring Mirror the screen of the iOS device to the large displayAndroid mirroring Mirror the screen of the android device to the large display, and support annotationsWindows mirroring Mirror the screen of Windows PC to the large display, and touch feedback from the large display to PCmacOS mirroring Mirror MacBook screen to the large display, and touch feedback from the large display to MacBookChrome mirroring Mirror the screen of Chromebook to the large display Ubuntu mirroring Mirror the screen of Ubuntu PC to the large display DLNA Support any APP compatible with DLNA protocolMultiple screens Share multiple screens to the large display, and the screen of the large display will be split automaticallyModerator control Control the client devices for screen sharing, TV Mirror, wireless annotations, full-screen display and so on.1.3 CLIENT REQUIREMENTSPlease ensure the client devices meet the following requirements:● Android 5.0 or later● Mac OS 10.9 or later● iOS 9.0 or later● Windows 7/8/10● Chrome OS● Ubuntu 12.04 or later1.4 NETWORK REQUIREMENTSESHAREPROPlease ensure that ESharePro and EShare client apps are in the same network.TCP Ports: 56789, 25123, 8121 & 8000UDP Ports: 48689, 25123DNS: Please enable the broadcast function of the router.To get a highly reliable, robust user experience, it is strongly recommended to connect the large display using Ethernet and the client device using a 5GHZ Wi-Fi band.AIRPLAY/IMIRRORPlease ensure that the mDNS of network/AP/router (if possible) is enabled.TCP Ports: 51040, 51030, 51020 & 51010UDP Ports: 5353 (mDNS to broadcast AirPlay)2. ESHARE APP GUIDE2.1 DOWNLOAD THE ESHARE APPPlease ensure that your client device and the large display are in the same network, and then launch “ESharePro”. Next, scan the QR-code or visit “eshare.app” to download and install the EShare app.2.2 GUIDE FOR ANDROID CLIENT DEVICES2.2.1 CONNECT TO THE LARGE DISPLAYPlease ensure that your client device and the large display are in the same network.⚫Set “Device Name” as the connection mode (default setting): launch the EShare app, and EShare will automatically search for large display devices in the samenetwork, and then select the device in the device list to connect to the large display.Or you can enter IP or PIN code to connect to the large display.⚫Set “PIN Code (6 digits)/PIN code (8 characters)” as the connection mode: launch the EShare app and enter the PIN code to connect to the large display.⚫Scan QR-code to connect: launch EShare app and scan the QR code to connect to the large display.2.2.2 FILE SHARING⚫Image: select any image to share it to the large display.⚫Audio/Video:select any audio/video to share it to the large display.⚫Doc: select any document to share it to the large display.⚫Storage:tap “Storage” in the top right corner of Doc sharing page to start the wireless storage, and visit the URL to upload files to your phone’s storage ordownload the files from it.2.2.3 SHARE SCREEN⚫Android devices: tap "Share Screen" to share screen to the large display.⚫iOS devices: tap "Share Screen" and follow the iOS screen sharing guide to share screen to the large display.1 2 34 52.2.4 FULL-SCREENYou can tap the full screen button to display your screen exclusively on the large display, even if two or more client devices are sharing the screen.Full-screen2.2.5 TV MIRRORTap “TV Mirror” to mirror the screen of the large display to your phone, and touch the phone to control the large display.2.2.6 WIRELESS ANNOTATIONSTap "TV Mirror", tap the pen button in the sidebar to start wireless annotations on the large display.2.2.7 CAMERATap “Camera” to share the photos or audio from your phone camera or microphone to the large display in real-time.2.2.8 REMOTE CONTROLTap “Remote” to use your phone as wireless mouse, remote controller, keyboard, air mouse, etc.2.2.9 SHARE FILES FROM OTHER APPS TO LARGE DISPLAYIn email, browser, file manager and other applications, you can share files to the large display through EShare app.Or you can share files to the large display with other apps supporting DLNA.2.3 GUIDE FOR WINDOWS/MACOS/CHROME OS/UBUNTU CLIENT DEVICES2.3.1 CONNECT TO THE LARGE DISPLAYPlease ensure that your Windows/macOS/Chrome OS/Ubuntu client devices and large display are in the same network.⚫Set “Device Name” as the connection mode (default setting): launch the EShare app, and EShare will automatically search for large display devices in the same network, and then select the device in the device list to connect to the large display.Or you can enter IP or PIN code to connect with to large display.⚫Set “PIN Code (6 digits)/PIN code (8 characters)” as the connection mode: launch the EShare app and enter the PIN code to connect to the large display.⚫Select the device in the history list to connect:click the input box “Enter IP or PIN code to connect” and you will see the history list (if any). Select the device to connect with to large display.2.3.2 SHARE SCREENTap "Share Screen" to share your PC screen to the large display, and touch to control client devices from the large display.Pause sharing Stop sharing⚫Share extend screen (for Win 10 only):for Windows users, you can click “Source”to select “Share extend screen” to just share your ex tend screen to the large display.2.3.3 TV MIRRORTap “TV Mirror” to mirror the screen of the large display to your PC, and control the large display on PC side.2.3.4 WIRELESS ANNOTATIONSTap "TV Mirror", and tap the pen button in the sidebar to start wireless annotations on the large display from the PC.2.3.5 FULL SCREENYou can click the full screen button to display your screen exclusively on the large display, even if two or more client devices are sharing the screen.2.3.6 INVITATION FOR MIRRORINGClick "Invitation for Mirroring” in Settings and the re are two following options for you:⚫Auto-accept:accept the moderator’s invitation for screen sharing automatically.When the moderator taps the button “Share Screen” in Moderator Control Center, your PC screen will be displayed on the large display.⚫Notify me:when the moderator taps the button “Share Screen” in Moderator Control Center, your PC screen won’t be displayed on the large display until you accept the invitation.3. GUIDE FOR ESHAREPRO3.1 MULTIPLE SCREENS3.1.1 MULTIPLE SCREENS SETTINGSLaunch ESharePro on the large display, tap the “Settings” button in the bottom right corner to set multiple screens.3.1.2 MULTIPLE SCREENS DISPLAYMultiple client device screens can be shared to the large display at the same time, and the screen of the large display will be split automatically.3.1.3 SWITCH THE AUDIO OUTPUT SOURCEThe audio of the last sharing device will be output by default from the large display on multi-screen mode. You can tap any one of the split windows on the large display to select the audio output source.Note: The audio of Android phones in sharing will be output from phones for lack of audio access permission to Android phones.3.1.4 FULL-SCREEN OR MULTIPLE SCREENSTap the Full-Screen icon at the bottom right corner of the large display on multi-screen mode to full-screen it. Click the icon again to exit the full-screen and go back to multiple screens.3.2 DISPLAY GROUP SETTINGS3.2.1 DISPLAY GROUP SETTINGSLaunch ESharePro, click the Display Group icon to enter the setting dialog, turn on the display group feature, and you will find other ESharePro preinstalled devices in the same network (if any) are listed. Next, select the device to join the display group, and click “OK” to save the settings.3.2.2 SHARE SCREEN TO THE DISPLAY GROUPAfter the setting mentioned above, share your screen to the main large display, and the screen of your client device will be shown on all the large displays in the group at the same time.3.3 MODERATOR MODELaunch "ESharePro" and click the moderator control button in the bottom right corner to enter the moderator control center. You can also enter the moderator control center by tapping the floating moderator button.3.3.1 OPTIONS FOR “SHARE SCREEN”⚫Allowed: client devices can share screens or share images/audio/videos/files to the large display. The client app for iOS or Android can also share the camera to the large display in real time.⚫Need authorization:client devices can share screen or share images/audio/videos/fi les/camera to the large display only when the option “Allow” is selected in the authorization dialog for screen sharing.⚫Disable: any client devices cannot share images/audio/videos/files/camera shot if the option of “Share Screen or File” is set as“Disable”.3.3.2 OPTIONS FOR “VIEW, CONTROL AND WIRELESS ANNOTATION”⚫Allowed: client devices can view and control the large display, can make annotations in TV Mirror or Remote Control.⚫Need authorization: client devices can view and control the large display and can make annotations in TV Mirror or Remote Control only when the option “Allow” is selected in the authorization dialog.⚫View only: client devices can only view the large display in TV Mirror but cannot control the large display or make annotations.⚫Disable: no client devices can view, control the large display in TV Mirror or Remote Control, or make annotations.3.3.3 OTHER OPTIONS IN MODERATOR CONTROL CENTERPrecondition: the client device is connected to the large display.⚫Invite the client device to share screen: select any one client device in the moderator control center, and click the button to invite the client device to share screen, and tap this button to stop sharing when the client device is sharing screen.⚫Allow the client device to control the large display: tap the screen control button to enable or disable the client’s control permission for the large display. If thisbutton is marked with a small green check mark, it shows the client can control the large display.⚫Disconnect the client device: tap the "disconnect" button , and select “OK” in the dialog to disconnect the client device.4. TECHNICAL SUPPORTPlease fill in your RMA or Product question on our websitehttps:///support/technical-support/If you have any questions, please email us at ************************TRIUMPH BOARD a.s.Neklanova 122/15128 00 Prague 2Czech RepublicEUPhone: +420 224 910 221E-mail: *********************NoticesEvery effort has been made to ensure all information contained in this user guide is correct, but the accuracy or completeness is not guaranteed. Before using this device, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to this device not contained in this manual or any contrary statements appearing on your purchase order shall have no force of effect unless expressly agreed upon, in writing, with this company.Reproduction or reprinting of this user guide or any part without permission is prohibited.The content of this user manual is subject to change without prior notice.。
菲利普5000系列智能超高清电视（4K超高清2160p）说明书
Philips5000 series Smart Ultra HDTV with Net TV and Dolby Vision50" class/po4K Ultra HD 2160p BrightProEnhanced Color Gamut50PFL5903Smart 4K UltraHDTVYour favorite online content in UltraHDDolby Vision™ transforms your TV experience with dramatic imaging - incredible brightness, contrast, and color that bring entertainment to life before your eyes.Enjoy the beauty of 4K Ultra HD•The beauty of 4K UltraHD TV is in savoring every detail •Pixel Precise UltraHD for vivid, natural, and real images •120 Perfect Motion Rate for increased pixel response times •An intelligent dimming backlight for dynamic contrast •Enjoy HD content in 4K UHD with a 4K upscaling engine •Dolby Vision for Dramatic Imaging at HomeAuthentic and clear sound experience.•20 Watts RMS of rich surround sound to complement 4K images •Immersive sound with clear voice designed by sonic emotion •Dolby Audio for the ultimate movie experienceComplete digital TV connectivity made simple.•Wireless LAN 802.11ac with MIMO for seamless streaming of 4K •Wirelessly mirror the screen of smart device on your TV •NetTV with Wireless access to online services on your TVHighlights4K UltraHD4 times the resolution of Full HD brings your viewing experience to the whole new level. Enjoy every detail and the breathtaking beauty of the pictures.Dolby VisionDolby Vision is a powerful cinema technology that now transforms your TV experiencee. It brings entertainment to life with dramaticimaging - incredible brightness, color, contrast, detail and dimensionality. And with the advanced capabilities in Dolby Vision, you'll see there's more to the story than generic HDR can reveal.Pixel Precise UltraHDThe beauty of 4K Ultra HD TV is in savoring every detail. The picture-processing algorithmsof our Pixel Precise Ultra HD engine convert any input picture into UHD resolution on your screen. The result? Whether you watch a video online or native 4K Ultra-HD content, you'll experience exceptional sharpness, motion, clarity, color and contrast from Philips.Bright ProBrightPro backlith boosts brighter areas of the image by up to twice as much as a regular LED backlight. Bright Pro enables to display exceptional brightness and contrast even in brightly lit rooms. Video scenes which feature bright light sources such as sunlight, fireworks, police lights, flashlights, etc. look more realistic and lifelike.Macro dimmingUsing a proprietary video processing algorithm which measures average luminance level of each video frame, Philips' Macro Dimming intelligent backlight dims the backlight to match every video frame to ensure you have a strain-free life-like viewing experience with bright whites, vivid colors and dark blacks.120 Perfect Motion Rate120 Perfect Motion Rate (PMR) creates extreme motion sharpness for clear and vibrant images in fast action movies. The new Philips PMRstandard reduces response time of the HDTV to produce faster picture transitions and reduces motion artifacts.Net TVPhilips NetTV is built for streaming. With a simple push of a button, gain instant access to popular streaming applications such as Netflix, Vudu, YouTube, all within a clutter-free, easy to use interface. Visit the App Store to download additional content from our extensive entertainment library, with entertainmentoptions to suit everyone. Surf the web on your big screen TV, all without the need ofconnecting a computer. Enjoy smooth streaming of up-to 4K content with the powerful, built-inWireless 802.11ac MIMO Dual-Band chipset.SpecificationsPicture/Display•Aspect ratio: Widescreen(16:9)•Contrast ratio (typical): 5000:1•Response time (typical): 9.5 ms•Viewing angle: 178º (H) / 178º (V)•Diagonal screen size: 50 inch / 127 cm•Visible screen diagonal (inch): 49.5 inch •Display screen type: LED UltraHD Display •Panel resolution: 3840x2160p•Picture enhancement: Pixel Plus UltraHD, Black stretch, Digital Noise Reduction, MPEG artifact reduction, 120 PMR, Color Enhancement, Dynamic contrast, Gamma, Macro DimmingSupported Display Resolution •Computer formatsResolution Refresh rate640 x 480 60Hz720 x 480 60Hz800 x 600 60Hz1024 x 768 60Hz1280 x 768 60Hz1280 x 1024 60Hz1360 x 768 60Hz1440 x 900 60 Hz1920 x 1080 60Hz1680 x 1050 60Hz1400 x 1050 60Hz3840 x 2160 60Hz4096 x 2160 60Hz•Video formatsResolution Refresh rate480i 60Hz480p 60Hz720p 60Hz1080i 60Hz1080p 24,30,60Hz2160p 24, 30, 60HzSound•Equalizer: 5-bands•Output power (RMS): 2 x 10W•Sound System: Sonic Emotion Premium, Stereo, SAP, Dolby Audio Loudspeakers•Built-in speakers: 2Convenience•Child Protection: Child Lock+Parental Control•Clock: Sleep Timer•Ease of Installation: Autostore•Ease of Use: AutoPicture, AutoSound, Settingsassistant Wizard, Auto Volume Leveling•Remote Control: TV•Screen Format Adjustments: 4:3, Movie expand 14:9,Movie expand 16:9, Super Zoom, Widescreen,unscaled (1080p dot by dot), Full, Automatic•Multimedia: auto slideshow, USB media browserMultimedia Applications•Multimedia connections: USB Storage Device•Playback Formats: MP3, JPEG Still pictures, MPEG1,MPEG2, H.264/MPEG-4 AVC, H.265/HEVC, AAC,WAVE, AC3, MPEG4Tuner/Reception/Transmission•Aerial Input: 75 ohm F-type•TV system: ATSC, NTSC•Video Playback: NTSC•Tuner bands: UHF, VHFConnectivity•AV 1: Shared audio L/R in, CVBS/YPbPr•Audio Output - Digital: Optical (TOSLINK)•Other connections: Ethernet, Headphone out,Wireless LAN 802.11ac MIMO•USB: USB•HDMI1:Shared audio L/R in,HDMI•HDMI 2: Shared audio L/R in, HDMI (Audio ReturnChannel)•HDMI 3: HDMI, Shared audio L/R in•EasyLink (HDMI-CEC): One touch play, Powerstatus, System info (menu language), Remote controlpass-through, System audio control, System standbyPower•Ambient temperature: 5°C to 40°C (41°F to 104°F)•Mains power: 120V/60Hz•Power consumption: 125 W•Standby power consumption: < 0.5WDimensions•Set dimensions in inch (W x H x D):44.2 x 25.6 x 3.7 inch•Product weight (lb): 21.6 lb•Set dimensions with stand in inch (W x H x D):44.2 x 27.6 x 8.9 inch•Product weight (+stand) (lb): 22.1 lb•Box dimensions in inch (W x H x D):51.2 x 29.4 x 6.4 inch•Weight incl. Packaging (lb): 29.8 lb•VESA wall mount compatible: 300 x 200 mmAccessories•Included accessories: Table top stand, Quick startguide, User Manual, Remote Control, Batteries forremote control, Screws•Power cord: 59.05 inchNetwork Services•NetTV Apps: Netflix, Vudu, Vewd browser,YouTube, Pandora, Vewd app store, Youtube TV,Showtime Streaming•Network Features: Home Network, WirelessScreencastingIssue date 2018-08-15 Version: 2.1.112 NC: 8670 001 53114 UPC: 6 09585 25196 0© 2018 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.。
Philips 3000系列DVD播放器DVP3800说明说明书
Philips 3000 seriesDVD playerDVP3800Enjoy it all - from DVDDoes size matter? Ever heard of less is more? Introducing the best value DVD player. No complications! Just a simple set that plays practically any disc format, including your digital photos, with absolutely no compromise to picture quality.Bring audio and video to life•12-bit/108 MHz video processing for sharp and natural images•192 kHz/24-bit audio DAC enhances analogue sound input•High-quality outputs for analogue and digital audio•Screen Fit for optimal viewing every time•Smart Picture provides personalised image settingsPlay all your movies and music•ProReader Drive for smooth playback on virtually any disc•DivX Ultra Certified for enhanced DivX video playback•Play CD, (S)VCD, DVD, DVD+- R/RW, DivX, MP3, WMA, JPEGFits any space, any lifestyle•Ultra-slim design that fits anywhereIssue date 2017-04-04Version: 1.2.412 NC: 8670 000 79885EAN: 87 12581 61303 7© 2017 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice.Trademarks are the property of Koninklijke Philips N.V.or their respective owners. SpecificationsDVD playerHighlights Multimedia DivX Play CD, (S)VCD, DVD, DVD+- R/RW, DivX, MP3, WMA, JPEG12-bit/108 MHz video processing 12-bit Video DAC is a superior Digital-to-Analogue Converter that preserves every detail of the authentic picture quality. It shows subtle shades and smoother graduation of colours, resulting in a more vibrant and natural picture. The limitations of the standard 10-bit DAC become particularly apparent when it is used with large screens and projectors.192 kHz/24-bit audio DAC 192 kHz sampling enables you to have an accurate representation of the original sound curves. Together with a 24-bit resolution, more information is captured from the original analogue sound wave form, giving a much richer audio reproduction.Screen Fit Whatever you're watching, on whatever TV, Screen Fit ensures that the picture fills the whole screen. Annoying black bars on the top and bottom are eliminated, without any tedious manual adjustments to make. Simply press the Screen Fit button, choosethe format and enjoy your movie in full screen ProReader DrivePicture/Display •D/A converter: 12-bit, 108 MHz •Picture enhancement: Progressive scan, Video upsampling Sound •D/A converter: 24-bit, 192 kHz •Frequency response: 30-20,000 Hz •Signal to noise ratio: 100•Distortion and Noise (1 kHz): 85 dB •Crosstalk (1 kHz): 100 dB •Dynamic Range (1 kHz): 90 dB •Sound System: Dolby Digital Video Playback •Playback Media: CD, CD-R/CD-RW, Video CD/SVCD, DVD, DVD-R/-RW, DVD+R/+RW, DVD-Video, DivX •Compression formats: MPEG1, MPEG2, DivX 3.11, DivX 4.x, DivX 5.x, DivX 6.0•Video disc playback system: PAL, NTSC Audio Playback •Playback Media: CD, MP3-CD, MP3-DVD, WMA-CD, CD-R/RW, Audio CD •MP3 bit rates: 32 - 320 kbps •Compression format: Dolby Digital, MP3, WMA, PCM Still Picture Playback •Playback Media: DVD-R/-RW, DVD+R/+RW, CD-R/RW, Picture CD, Kodak Picture CD •Picture Compression Format: JPEG •Picture Enhancement: Flip photos, Rotate,Slideshow, Zoom, Slideshow with MP3 playback Multimedia Applications •Playback Formats: JPEG Still pictures, MP3Connectivity •Rear Connections: Analogue audio Left/Right out, Composite video (CVBS) output, Digital coaxial out, Scart Convenience •Child Protection: Parental Control, Child Lock •On-Screen Display languages: English, Czech, Danish, Dutch, Finnish, French, German, Greek, Italian, Norwegian, Polish, Portuguese, Spanish, Swedish, Turkish Power •Power consumption: < 10 W •Standby power consumption: < 0.5 W •Power supply: 110-240V, 50/60 HzAccessories •Included accessories: Remote Control, World Wide Warranty leaflet, User Manual, AAA Battery (x1)Dimensions•Set dimensions (W x H x D): 360 x 42 x 209 mm •Packaging dimensions (W x H x D): 400 x 80 x 284 mm •Set weight: 1.3 kg •Weight incl. Packaging: 2.4 kg。
菲利普电视说明书
PhilipsLCD TV with Ambilight and Pixel Plus 3 HD107cm (42")DTV42PFL8803DLight up your experienceImmerse yourself in a captivating Ambilight experience. Featuring a full HD 1080p display and Pixel Plus 3HD, this Flat TV combines HD Natural Motion, exciting invisible sound and Ambilight - lighting up your experience for years to come.Elevate your viewing experience•Ambilight enhances the viewing experience with ambient light See pictures come alive•Pixel Plus 3 HD for most sharp and clear pictures•HD Natural Motion for ultra smooth motion in Full HD movies Hear exciting and powerful sound•Integrated wOOx loudspeakers for deep and powerful bass Designed for your convenience•3 HDMI inputs for full digital HD connection in one cable Easy to connect and enjoy•EasyLink: easy control of TV & connected device via HDMI CECHighlightsAmbilightAmbilight makes an impressive contribution to the overall viewing experience by producing ambient light to complement the colors and light intensity of the on-screen image. It adds a new dimension to the viewing experience, completely immersing you into the content you are watching. It creates ambiance, stimulates more relaxed viewing, and improves perceived picture detail, contrast and color. Ambilight automatically and independently adapts its colors according to the changing content on the screen.Pixel Plus 3 HDPixel Plus 3 HD offers the unique combination of ultimate sharpness, natural detail, vivid colors and smooth natural motion on all qualities of HD, standard TV signals and multimedia content, for high definition displays. Each pixel of the incoming picture is enhanced to better match the surrounding pixels, resulting in a more natural picture. Artifacts and noise in all sources from multimedia to standard TV and also in highly compressed HD are detected and reduced ensuring that thepicture is clean and razor sharp.HD Natural MotionPhilips invented HD Natural Motion tominimize juddering effects that are visible withmovie based picture content. The awardwinning algorithm estimates motion in thepicture and corrects juddering movements inboth broadcast and recorded movie material(such as DVD and Blu-ray Disc). The resultingsmooth motion reproduction and excellentsharpness take the viewing experience to ahigher level.Integrated digital tunerThe integrated digital tuner lets you receivedigital cable and terrestrial TV without anadditional set top box. Enjoy quality TV clutterfree.Integrated wOOx loudspeakerswOOx technology creates a superior basssound by capturing and enhancing lowfrequency bass for a dramatically enhancedbass and sound experience.3 HDMI inputsHDMI makes an uncompressed digital RGBconnection from the source to the screen forthe ultimate picture quality. HDMI intelligentlycommunicates the highest output resolutionwith the source device. The HDMI input is fullybackward compatible with DVI sources andincludes digital audio. HDMI uses HDCP copyprotection. With 2 HDMI inputs on the backand 1 HDMI on the side of the TV you canconnect multiple HD sources, for instance anHD settop box, a Blu-ray player, and gameconsole or digital Camcorder. Your TV is fullyprepared for the HD future.EasyLinkEasyLink uses the HDMI CEC industrystandard protocol to share functionalitybetween connected devices and the TV. WithEasyLink only one remote control is needed tooperate main functionalities on your TV andconnected devices. EasyLink uses the standardHDMI cable to transfer system commands. Itworks between all electronic devices equippedwith HDMI CEC.Issue date 2019-06-28Version: 1.0.5612 NC: 8670 000 43279EAN: 87 12581 44982 7© 2019 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.SpecificationsPicture/Display •Aspect ratio: Widescreen•Diagonal screen size: 42 inch / 107 cm•Display screen type: LCD Full HD W-UXGA Act. matrix•Panel resolution: 1920x1080p•Picture enhancement: Pixel Plus 3 HD, 3D Combfilter, Active Control + Light sensor,Contrast Plus, Digital Noise Reduction, Jagged Line Suppression, Luminance Transient Improver,Progressive scan, 100Hz LCD, HD Natural Motion •Screen enhancement: Anti-Reflection coated screenAmbilight•Ambilight Features: Ambilight 2 Channel Supported Display Resolution•Computer formats Resolution Refresh rate 640 x 480 60, 72, 75, 85Hz 720 x 400 70Hz 800 x 600 60, 72, 75, 85Hz 1024 x 768 60, 70, 75, 85Hz 1280 x 768 60Hz 1280 x 1024 60Hz •Video formatsResolutionRefresh rate 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50, 60Hz 1080i 50, 60Hz 1080p 24, 50, 60Hz 1080p 24, 25, 30HzSound•Equalizer: 7-bands•Output power (RMS): 30W•Sound Enhancement: Auto Volume Leveller, Graphic Equaliser, Incredible Surround •Sound System: Mono, Stereo, BBELoudspeakers•Built-in speakers: 2•Loudspeaker types: wOOx loudspeakersConvenience•Child Protection: Child Lock+Parental Control•Clock: On main display, Sleep Timer, Wake Up Timer•Connection Enhancement: Easy link•Ease of Installation: Autostore, Fine Tuning, Program Name, Sorting•Ease of Use: 8 channel smart surf list, Auto Volume Leveller (AVL), Program List, Side Control •Electronic Program Guide: Now + Next EPG •On-Screen Display languages: English, Simplified Chinese, Traditional Chinese •Remote Control: TV•Remote control type: PF06A08B•Screen Format Adjustments: 4:3, Movie expand 14:9, Movie expand 16:9, Subtitle Zoom, Super Zoom, Widescreen•Signal strength indication•Smart mode: Game, Movie, Personal, Power saver, Standard, VividTuner/Reception/Transmission•Aerial Input: 75 ohm coaxial (IEC75)•TV system: PAL I, PAL B/G, PAL D/K, SECAM B/G, SECAM D/K•Video Playback: NTSC, SECAM, PAL•Tuner bands: Hyperband, S-Channel, UHF, VHF •Number of Preset Channels: 99Connectivity•AV 1: Audio L/R in, YPbPr •AV 2: Audio L/R in, CVBS in •HDMI 1:HDMI v1.3•HDMI 2:HDMI v1.3•EasyLink (HDMI-CEC): One touch play, System info (menu language), System standby•Front /Side connections: HDMI v1.3, S-video in, CVBS in, Audio L/R in, Headphone Out•Other connections: PC-in VGA + Audio L/R inPower•Ambient temperature: 5 °C to 40 °C •Mains power: 220-240V, 50/60Hz •Power consumption: 230 W•Standby power consumption: (typical) <0.15WDimensions•Set dimensions (W x H x D): 1046 x 645 x 108 mm•Set dimensions with stand (W x H x D): 1046 x 716 x 262 mm•Weight incl. Packaging: 32 kg •Product weight: 20.5 kg•Product weight (+stand): 26 kg •Box dimensions (W x H x D): 1171 x 810 x 333 mm•VESA wall mount compatible: 400 x 400 mmAccessories•Included accessories: Tabletop swivel stand, Power cord, Quick start guide, User Manual, Warranty certificate, Remote Control, Batteries for remote control。
AES EBU和SPDIF循环通路输入的双路音频分析仪说明书
Features & BenefitsTwo Balanced or Unbalanced AES/EBU or SPDIFLoopthrough Inputs Drive Four-channel Level Meters Adjustable Clip/Mute IndicatorsAudio Phase Display Phase Correlation Meter Unique Session Statistics CompilationVITC and LTC Time Code InputsChannel Status and User Data Decoding AES-3 DARS InputOptional Serial Digital Video (Embedded Audio) Input Optional Balanced Analog Line OutputsSupports a Pair of AES Streams Output by Professional DVTRsConfigurable Level Indicators Support a Variety of Technical PreferencesMono Compatibility and Sound-stage Monitoring Assured via Phase Display Clear Phase Indication Regardless of Signal Amplitude or PanningQuality Control Certificate via Session Statistics Compilation Time Code Stamping of Errors Pinpoints Audio Needing CorrectionSimple Viewing of Encoded Channel Status and User Data System Timing Measurements to Recognized Standard Monitor Embedded Audio Without an External DemultiplexerMonitor Sound viaLoudspeakers Without External ConvertersApplicationsDigital Audio Monitoring in Broadcast and Post Production Facilities Creative Adjustments in Digital Audio ProductionDigital Audio Monitor764The Tektronix 764 Digital Audio Monitor is an advanced monitoring tool for production and quality assessment in modern digital audio facilities.It combines the features of a phase and level meter with those of a digital audio data monitor.The 764 provides technical personnel with a setup and calibration tool and production personnel with an operational monitor capable of conventional and advanced audio assessment tasks.The 764 is well equipped for these tasks.Easy-to-read display screens can be viewed from across a room.An auxiliary VGA output supports larger color display units.Its two AES/EBU input channels have loopthrough capability permitting the 764 to be assigned to any signal path.Operation follows an easy-to-use,menu-driven scheme.Audio LevelAudio amplitude measurement results are displayed on up to four bar graphs.Most characteristics can be configured to user preferences.This includes the amplitude scale and ballistics,peak-hold characteristics and the value of test and peak levels.Other features include detection of digital clipping and muting and detection of system errors.Audio PhaseA Lissajous display is augmented with a mathematical phase correlation meter.In addition,selectable Sum and Difference bars provide an additional phase assessment tool.Time CodeThe 764 features Time Code input and display capabilities.Vertical Interval and Longitudinal Time Code can be displayed for locating specific audio passages.Audio Monitors • /video_audio1 1981Digital Audio Monitor764assess timing relationships between digital audio mon problems due to sample slipping and non-locked signals can easily be detected.Status and User DataChannel Status and User data are recovered and displayed in contiguous 24-byte blocks.This allows the content and format of these auxiliary data channels to be monitored.Optional Embedded Audio InputEmbedded audio technology simplifies routing of video and audio signals in broadcast and post-production facilities,but places new demands on audio monitoring equipment.To eliminate the need for a separate digital audio demultiplexing step for signal monitoring,the Option 01 Embedded Audio Input adds a serial digital video input to the standard digital audio inputs of the 764.Once it extracts the digital audio signal,the 764 provides the same comprehensive monitoring capabilities as it does for discrete AES/EBU audio.The 764’s Embedded Audio Input option extracts digital audio from 270 Mb/s serial component signals and from 143 (525 line)Mb/s serial composite signals.Audio data up to 20 bits at a 48kHz sample rate is supported.Optional Analog Line Outputs Many applications require listening overloudspeakers as a part of the audio monitoring process.In digital facilities,an audio feed istypically routed to a digital-to-analog converter,which drives an amplifier and speakers.Option 02 Analog Line Output provides the digital-to-analog conversion within the 764,eliminating the space requirements and expense of external conversion devices.The balanced line output level can be either fixed or variable (via the headphone Volume control) and calibrated output level settings are selectable by internal jumpers.Jumper settings are also available for driving unbalanced loads at low levels.Rear-panel AES/EBU balanced output capability is lost when this option is installed.Common ApplicationsConsoles and workstations DAT,D1,D2,D3,etc.Digital STL for radio A/D testing and alignment Digital audio routers Signal processing Duplication and masteringAudio Monitors • /video_audioSignal Format –Balanced,24 data bits,4 preamble bits,C,U,V and P bits.Digital Audio Reference InputConnector –XLR conforming to AES3-1992.BNC conforming to AES3-ID.Signal Format –Balanced,24 data bits ignored,4 preamble bits,C,U,V and P bits.Digital Audio Monitor764CharacteristicsPhysical Characteristics Dimensionscm in.Height 13.3 5.25Width 21.68.5Depth 43.217Weightkglb.4.510Option 01 Embedded Audio InputSpecificationsSerial Digital Video InputInput Type – 75 Ω(nominal),BNC.Serial Digital Video Formats Accepted – Audio embedded per SMPTE 272M level B in the following video formats:270 Mb/s component digital (625–and 525-line) complying with SMPTE 259M and CCIR 656-1.Input Level – 800mV p-p ±10%.Return Loss– ≥15dB,power on.Equalization Range – Proper operation with up to 19.0dB loss at 135MHz using coaxial cable having1/f-loss characteristics with a launch amplitude of 800mV.Serial Digital Video OutputOutput Type – 75 Ω(nominal),BNC,active loopthrough.Output Level – 800mV ±10%.Return Loss – ≥15dB.Option 02 Analog Line Output SpecificationsOutput Type – Balanced XLRs (2 channels).Output Impedance – 50Ω,nominal.Frequency Response,20Hz to 20kHz –±2dB.THD+N (20Hz to 20kHz,22kHz measurement bandwidth)– <0.05%.THD+N (at 1kHz,22kHz measurement band-width,fixed or variable (volume control fully CW)level outputs,0dBFS input,RL ≥10 k Ω)– typically <0.005%.Output Levels (0dBFS,RL = 600 Ω)– Fixed:24dBM +1.6,–0.0dB.Variable (volume control fully CW):24dBM +1.6,–0.0dB.Safety – UL3111-1,CSA1010.1,EN61010-1,IEC61010-1.EMC – UL1244.Audio Monitors • /video_audioLongitudinal Time Code Input Connector – XLR.Signal Format – Reads SMPTE and EBU LTC.(Indicates time as hours:minutes:seconds.)Level MetersPhase DisplaySession Screen DisplayOrdering Information764 DIGITAL AUDIO MONITORIncludes instruction manual and power cord.764 OptionsOpt. 01– Embedded audio input.Opt. 02– Analog line output.764 Digital Audio Monitor Field Upgrade Kit764F01– Embedded audio input kit for 764s with serial numbers B020001 and higher.Upgrades a 764 with serial number B020001 or higher with embedded audio input processing.Recommended Accessories Plain Case – 1700F00.Dual Rack Adapter – 1700F05.Portable Case with Handle – 1700F02.764 Service Manual – 070-8810-00.Optional AccessoriesUtility Drawer – 1700F07.Blank Panel – 1700F06.75 ΩTerminator – 011-0102-00..Digital Audio Monitor764All rights reserved.Tektronix products are covered by U.S.and foreign patents,issued and rmation in this publi-cation supersedes that in all previously published material.Specification and price change privileges reserved.TEKTRONIX and TEK are registered trademarks of Tektronix,Inc.All other trade names referenced are the service marks,trademarks or registered trademarks of their respective companies.08/01 HB/XBS21W-7269-3Audio Monitors •/video_audioSynchronization MeasurementPower Supply。
VIDEO DISPLAY
专利名称：VIDEO DISPLAY发明人：OTSUKI MASAKI,大槻 正樹,KATO SHIGERU,加藤 茂,MIYAKE NOBUYUKI,三宅 信行,ISAGIIKKO,伊三木 一皇,TAKASHINA TOMOMI,高階知巳申请号：JP2004329136申请日：20041112公开号：JP2006139103A公开日：20060601专利内容由知识产权出版社提供专利附图：摘要：PROBLEM TO BE SOLVED: To provide such a video display in which a variation, if any, in the situation of an external scene hardly attracts user's concentration while evading that the external scene appears dark.SOLUTION: A head mount 1 is provided with a luminance sensor 6, in addition to a display element 5 which displays an image outputted from an image processor 4 on anLCD and projects the image through an optical system to the user's eyes. The region where the luminance sensor 6 has sensitivity is arranged to nearly coincide with a region where the image is displayed to the user's eyes. By the output of the luminance sensor 6, in the region where the image is displayed to one eye, the change in the brightness of the outside world where the other eye feels is detected. When there is a change in the output of the luminance sensor, the user's attention is drawn by changing the contrast of the image to be displayed or changing the displayed position according to the change so as to avoid transfer of the attention to the change in the outside world.COPYRIGHT: (C)2006,JPO&NCIPI申请人：NIKON CORP,株式会社ニコン,NIKON SYSTEM:KK,株式会社ニコンシステム地址：東京都千代田区丸の内３丁目２番３号,神奈川県横浜市西区みなとみらい二丁目３番３号国籍：JP,JP代理人：細江 利昭更多信息请下载全文后查看。
AOC CQ32G2SE 显示器使用手册说明书
©2020 AOC. All Rights Reserved.LCD Monitor User ManualCQ32G2SESafety (1)National Conventions (1)Power (2)Installation (3)Cleaning (4)Other (5)Setup (6)Contents in Box (6)Setup Stand & Base (7)Adjusting Viewing Angle (8)Connecting the Monitor (9)Adaptive-Sync function (10)Adjusting (11)Hotkeys (11)OSD Setting (12)Luminance (13)Color Setup (14)Picture Boost (15)OSD Setup (16)Game Setting (17)Extra (18)Exit (19)LED Indicator (20)Troubleshoot (21)Specification (22)General Specification (22)Preset Display Modes (23)Pin Assignments (24)Plug and Play (25)SafetyNational ConventionsThe following subsections describe notational conventions used in this document.Notes, Cautions, and WarningsThroughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows:NOTE: A NOTE indicates important information that helps you make better use of your computer system.CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority.PowerThe monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fitonly into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.Do not overload power strips and extension cords. Overloading can result in fire or electric shock.To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100-240V AC, Min. 5A.The wall socket shall be installed near the equipment and shall be easily accessible.For use only with the attached power adapterManufacturer: TPV Electronics (Fujian)Co.,Ltd. Model: ADPC2090InstallationDo not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or electricshock. Never spill liquids on the monitor. Do not place the front of the product on the floor.If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate henceoverheating may cause a fire or damage to the monitor.See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the stand:Installed with stand Installed with standCleaningClean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet.When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.Please disconnect the power cord before cleaning the product.OtherIf the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center.Make sure that the ventilating openings are not blocked by a table or curtain.Do not engage the LCD monitor in severe vibration or high impact conditions during operation.Do not knock or drop the monitor during operation or transportation.SetupContents in Box**Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.CD Manual Warranty card Stand BasePower Cable Adapter DP Cable HDMI CableSetup Stand & BasePlease setup or remove the base following the steps as below. Setup:Remove:Adjusting Viewing AngleFor optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference.Hold the stand so you will not topple the monitor when you change the monitor’s angle.You are able to adjust the monitor as below:NOTE:Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.Connecting the MonitorCable Connections In Back of Monitor and Computer:1. HDMI-22. HDMI-13. DisplayPort4. Earphone5. PowerConnect to PC1. Connect the power cord to the back of the display firmly.2. Turn off your computer and unplug its power cable.3. Connect the display signal cable to the video connector on the back of your computer.4. Plug the power cord of your computer and your display into a nearby outlet.5. Turn on your computer and display.If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting. To protect equipment, always turn off the PC and LCD monitor before connecting.Adaptive-Sync function1. Adaptive-Sync function is working with DP/HDMI2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting • Radeon™ RX Vega series• Radeon™ RX 500 series• Radeon™ RX 400 series• Radeon™ R9/R7 300 series （R9 370/X, R7 370/X, R7 265except）• Radeon™ Pro Duo (2016)• Radeon™ R9 Nano series• Radeon™ R9 Fury series• Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except)AdjustingHotkeys1Source/Exit2Game Mode3Dial Point4Menu/Enter5PowerMenu/EnterPress to display the OSD or confirm the selection.PowerPress the Power button to turn on the monitor.Dial PointWhen there is no OSD, press Dial Point button to show / hide Dial Point.Game ModeWhen there is no OSD, press “” key to open game mode function, then press “” or “” key to select game mode (FPS, RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) basing on the different game types.Source/ExitWhen the OSD is closed, press Source/Exit button will be Source hot key function.OSD SettingBasic and simple instruction on the control keys.OSD Setup1). Press the MENU-button to activate the OSD window.2). Press Left or Right to navigate through the functions. Once the desired function is highlighted, press theMENU-button to activate it, press Left or Right to navigate through the sub-menu functions. Once the desired function is highlighted, press MENU-button to activate it.3). Press Left or to change the settings of the selected function. Press to exit. If you want to adjust any otherfunction, repeat steps 2-3.4). OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and then presspower button to turn the monitor on. To un-lock the OSD - press and hold the MENU-button while the monitor is off and then press power button to turn the monitor on.Notes:1). If the product has only one signal input, the item of “Input Select” is disable to adjust.2). ECO modes (except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only one statecan exist.LuminanceOSD SetupContrast 0-100 Contrast from Digital-register.Brightness 0-100 Backlight AdjustmentEco modeStandard Standard ModeText Text ModeInternet Internet ModeGame Game ModeMovie Movie ModeSports Sports ModeReading Reading ModeGammaGamma1Adjust to Gamma 1Gamma2Adjust to Gamma 2Gamma3Adjust to Gamma 3DCROff Disable dynamic contrast ratioOn Enable dynamic contrast ratioHDR ModeOffSelect HDR Mode.HDR PictureHDR MovieHDR GameNote:When “HDR Mode” is set to “non-off”, the items “Contrast”, “Brightness”, “Gamma” cannot be adjusted.Color SetupOSD SetupColor Temp.Warm Recall Warm Color Temperature from EEPROM.Normal Recall Normal Color Temperature from EEPROM.Cool Recall Cool Color Temperature from EEPROM.sRGB Recall SRGB Color Temperature from EEPROM.User Restore Color Temperature from EEPROM.DCB ModeFull Enhance On or Off Disable or Enable Full Enhance ModeNature Skin On or Off Disable or Enable Nature Skin ModeGreen Field On or Off Disable or Enable Green Field ModeSky-blue On or Off Disable or Enable Sky-blue ModeAutoDetect On or Off Disable or Enable AutoDetect ModeDCB Demo On or Off Disable or Enable DemoRed0-100Red gain from Digital-register.Green0-100Green gain from Digital-register.Blue0-100Blue gain from Digital-register.Note:When “HDR Mode” under “Luminance” is set to “non-off”, all items under “Color Setup” cannot be adjusted.Picture BoostOSD SetupBright Frame on or off Disable or Enable Bright FrameFrame Size 14-100 Adjust Frame SizeBrightness 0-100 Adjust Frame BrightnessContrast 0-100 Adjust Frame ContrastH. position 0-100 Adjust Frame horizontal PositionV. position0-100 Adjust Frame vertical PositionNote:Adjust the brightness, contrast, and position of the Bright Frame for better viewing experience.When “HDR Mode” under “Luminance” is set to “non-off”, all items under “Picture Boost” cannot be adjusted.OSD SetupOSD Setup Language Select the OSD language Timeout5-120Adjust the OSD TimeoutDP Capability 1.1/1.2If the DP video content supports DP1.2, please select DP1.2 for DP Capability; otherwise, please select DP1.1.Please be noted that only DP1.2 support Adpative-Sync function.H. Position 0-100 Adjust the horizontal position of OSD V. Position 0-100 Adjust the vertical position of OSD Volume 0-100Volume Adjustment.Transparence 0-100Adjust the transparence of OSDBreak Reminderon or offBreak reminder if the user continuously work for more than 1hrsGame SettingOSD SetupGame ModeFPSFor playing FPS (first Person Shooters) games.Improves dark theme black level details.RTSFor playing RTS (Real Time Strategy). Improves theimage quality.RacingFor playing Racing games, Provides fastest responsetime and high color saturation.Gamer 1User’s preference settings saved as Gamer 1.Gamer 2User’s preference settings saved as Gamer 2.Gamer 3User’s preference settings saved as Gamer 3.Off No optimization by Smart image gameShadow Control0-100Shadow Control Default is 50, then end-user can adjustfrom 50 to 100 or 0 to increase contrast for clear picture.1. If picture is too dark to be saw the detail clearly,adjusting from 50 to100 for clear picture.2. If picture is too white to be saw the detail clearly,adjusting from 50 to0 for clear pictureGame Color0-20Game Color will provide 0-20 level for adjustingsaturation to get better picture.Low Blue ModeReading / Office /Internet / Multimedia /OffDecrease blue light wave by controlling colortemperature.Low Input Lag On/Off Turn off frame buffer to decrease input lagOverdriveWeakAdjust the response time.MediumStrongBoostOffAdpative-Sync On or OffDisable or Enable Adpative-Sync.Adpative-Sync Run Reminder: When the Adpative-Syncfeature is enabled, there may be flashing in some gameenvironments.Frame CounterOff / Right-up / Right-Down / Left-Down /Left-UpDisplay V frequency on the corner selectedMBR0 ~ 20Adjust the Motion Blur Reduction.Note:1) T he function MBR and Overdrive Boost are available only when Adpative-Sync is off and the vertical frequency is up to 75 Hz.2) The screen brightness will be reduced when adjusting MBR or Over driver setting to Boost.3) W hen “HDR Mode” under “Luminance” is set to “non-off”, the items “Game Mode”, “Shadow Control”, “Game Color”, “Low Blue Mode” cannot be adjusted.ExtraOSD SetupInput Select Select Input Signal Source Off timer0-24hrs Select DC off timeImage RatioWideSelect image ratio for display.4:31:117” (4:3)19” (4:3)19” (5:4)19”W (16:10)21.5”W (16:9)22”W (16:10)23”W (16:9)23.6”W (16:9)24”W (16:9)27”W (16:9)DDC/CI Yes or No Turn ON/OFF DDC/CI Support Reset Yes or No Reset the menu to defaultExitOSD SetupExit Exit the main OSDLED IndicatorStatus LED Color Full Power Mode White Active-off Mode OrangeTroubleshootProblem & Question Possible SolutionsPower LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected to agrounded power outlet and to the monitor.No images on the screen Is the power cord connected properly?Check the power cord connection and power supply.Is the cable connected correctly?(Connected using the HDMI cable)Check the HDMI cable connection.(Connected using the DP cable)Check the DP cable connection.* HDMI/DP input is not available on every model.If the power is on, reboot the computer to see the initial screen (the login screen), which can be seen.If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows 7/8/10) and then change the frequency of the video card.(Refer to the Setting the Optimal Resolution)If the initial screen (the login screen) does not appear, contact the ServiceCenter or your dealer.Can you see “Input Not Supported” on the screen?You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly. Adjust the maximum resolution and frequency that the monitor can handle properly.Make sure the AOC Monitor Drivers are installed.Picture Is Fuzzy & Has Ghosting Shadowing Problem Adjust the Contrast and Brightness Controls.Press to auto adjust.Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly to the video card output connector on the back.Picture Bounces, Flickers Or Wave Pattern Appears In The Picture Move electrical devices that may cause electrical interference as far away from the monitor as possible.Use the maximum refresh rate your monitor is capable of at the resolution you are using.Monitor Is Stuck In Active Off-Mode”The Computer Power Switch should be in the ON position.The Computer Video Card should be snugly fitted in its slot.Make sure the monitor’s video cable is properly connected to the computer. Inspect the monitor’s video cable and make sure no pin is bent.Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.Missing one of the primary colors (RED, GREEN, or BLUE)Inspect the monitor’s video cable and make sure that no pin is damaged. Make sure the monitor’s video cable is properly connected to the computer.Screen image is not centeredor sized properly Adjust H-Position and V-Position or press hot-key (AUTO). Picture has color defects(white does not look white)Adjust RGB color or select desired color temperature.Horizontal or vertical disturbances on the screen Use Windows 7/8/10 shut-down mode to adjust CLOCK and FOCUS. Press to auto-adjust.Regulation & Service Please refer to Regulation & Service Information which is in the CD manual or (to find the model you purchase in your country and to find Regulation & Service Information in Support page.Specification General SpecificationPanel Model name CQ32G2SEDriving system TFT Color LCDViewable Image Size80.0 cm diagonalPixel pitch 0.2724mm(H) x 0.2724mm(V) Video HDMI lnterface & DP Interface Separate Sync. H/V TTLDisplay Color 16.7M ColorsOthers Horizontal scan range30k-230kHz (HDMI)30k-250kHz (DP)Horizontal scan Size(Maximum)697.344mmVertical scan range48-144Hz (HDMI)48-165Hz (DP)Vertical Scan Size(Maximum)392.256mmOptimal preset resolution 2560x1440@60HzMax resolution2560x1440@144Hz (HDMI)2560x1440@165Hz (DP)Plug & Play VESA DDC2B/CIInput Connector HDMIx2/DPOutput Connector Earphone outPower Source 20Vdc, 4.5APower ConsumptionTypical(default brightness and contrast)55WMax. (brightness = 100, contrast =100)≤77WPower saving≤0.5WPhysical Characteristics Connector Type HDMI/DP/Earphone out Signal Cable Type DetachableEnvironmental TemperatureOperating 0°~ 40°Non-Operating -25°~ 55°HumidityOperating 10% ~ 85% (non-condensing)Non-Operating 5% ~ 93% (non-condensing) AltitudeOperating 0~ 5000 m (0~ 16404ft )Non-Operating 0~ 12192m (0~ 40000ft )Preset Display ModesSTANDARD RESOLUTION HORIZONTALFREQUENCY(kHz)VERTICAL FREQUENCY(Hz)VGA640x480@60Hz31.46959.940 VGA640x480@67Hz35.00066.667 VGA640x480@72Hz37.86172.809 VGA640x480@75Hz37.50075.00 SVGA800x600@56Hz35.15656.250 SVGA800x600@60Hz37.87960.317 SVGA800x600@72Hz48.07772.188 SVGA800x600@75Hz46.87575.000 SVGA832x624@75Hz49.72574.551 XGA1024x768@60Hz48.36360.004 XGA1024x768@70Hz56.47670.069 XGA1024x768@75Hz60.02375.029 SXGA1280x1024@75Hz79.97675.025 WXGA+1440x900@60Hz55.93559.887 FHD1920x1080@60Hz67.50060.000 QHD2560x1440@60Hz88.78759.951 QHD2560x1440@100Hz150.19199.946 QHD2560x1440@120Hz182.996119.998 QHD2560x1440@144Hz222.056143.952 QHD2560x1440@165Hz (DP)242.55165Pin AssignmentsPin No.Signal Name Pin No.Signal Name Pin No.Signal Name1.TMDS Data 2+9.TMDS Data 0-17.DDC/CEC Ground2.TMDS Data 2 Shield10.TMDS Clock +18.+5V Power3.TMDS Data 2-11.TMDS Clock Shield19.Hot Plug Detect4.TMDS Data 1+12.TMDS Clock-5.TMDS Data 1Shield13.CEC6.TMDS Data 1-14.Reserved (N.C. on device)7.TMDS Data 0+15.SCL8.TMDS Data 0 Shield16.SDA20-Pin Color Display Signal CablePin No.Signal Name Pin No.Signal Name 1ML_Lane 3 (n)11GND2GND12ML_Lane 0 (p)3ML_Lane 3 (p)13CONFIG14ML_Lane 2 (n)14CONFIG25GND15AUX_CH(p)6ML_Lane 2 (p)16GND7ML_Lane 1 (n)17AUX_CH(n)8GND18Hot Plug Detect9ML_Lane 1 (p)19Return DP_PWR10ML_Lane 0 (n)20DP_PWRPlug and PlayPlug & Play DDC2B FeatureThis monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.。
videojs 展示封面的方法
在Video.js 中展示封面可以通过在HTML 结构中添加一个带有封面的元素，然后在视频加载前将其隐藏来实现。
当视频加载完成后，通过JavaScript 将其显示出来。
以下是一个基本的示例：1. 在HTML 结构中添加带有封面的元素：```html<div class="video-js-box"><video id="my-video" class="video-js" controls><source src="my-video.mp4" type="video/mp4"></video><div id="poster" class="video-poster"><img src="my-poster.jpg" alt="Video Cover"></div></div>```2. 在CSS 中设置`.video-poster` 的初始状态为隐藏：```css.video-poster {display: none;}```3. 在JavaScript 中，当视频加载完成后，将`.video-poster` 的display 属性设置为block：```javascriptvar video = document.getElementById('my-video');var poster = document.getElementById('poster');video.addEventListener('loadedmetadata', function() {poster.style.display = 'block';});```在这个示例中，当视频加载完成后，带有封面的元素将显示出来。
Philips 322C6电视用户手册说明书
/welcome 322C6EN User manual 1 Customer care and warranty 26Troubleshooting & FAQs32T able of Contents1. Important (1)1.1 Safety precautions and maintenance (1)1.2 Notational Descriptions (2)1.3 Disposal of product and packingmaterial (3)2. Setting up the Display (4)2.1 Installation (4)2.2 Operating the Display (5)3. Image Optimization (8)3.1 SmartImage (8)3.2 SmartContrast (9)3.3 Philips SmartControl Premium (9)3.4 SmartDesktop Guide (15)4. T echnical Specifications (21)4.1 Resolution & Preset Modes (23)5. Power Management (24)6. Regulatory Information (25)7. Customer care and warranty (26)7.1 Philips’Flat Panel Displays Pixel DefectPolicy (26)7.2 Customer Care & Warranty (28)8. T roubleshooting & FAQs (32)8.1 Troubleshooting (32)8.2 SmartControl Premium FAQs (33)8.3 General FAQs (34)1. ImportantThis electronic user’s guide is intended for anyone who uses the Philips Display.T ake time to read this user manual before you use your Display.It contains important information and notes regarding operating your Display.The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt,indicating the date of purchase,dealer’s name and model and production number of the product.1.1 Safety precautions and mainte-nanceWarningsUse of controls,adjustments or procedures other than those specified in this documentation may result in exposure to shock,electrical hazards and/or mechanical hazards.Read and follow these instructions when connecting and using your computer Display. Operation• Please Keep the Display out of direct sunlight, very strong bright lights andaway from any other heat source. Lengthy exposure to this type of environment may result in discoloration and damage to theDisplay.• Remove any object that could fall into ventilation holes or prevent proper cooling of the Display’s electronics.• Do not block the ventilation holes on the cabinet.• When positioning the Display, make sure the power plug and outlet are easily ac-cessible.• If turning off the Display by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cableor DC power cord for normal operation.• Please use approved power cord provided by Philips all the time. If your power cordis missing, please contact with your localservice center. (Please refer to CustomerCare Consumer Information Center)• Do not subject the Display to severe vibration or high impact conditions duringoperation.• Do not knock or drop the Display during operation or transportation. Maintenance• To protect your Display from possible damage, do not put excessive pressureon the LCD panel. When moving yourDisplay, grasp the frame to lift; do not liftthe Display by placing your hand or fingers on the LCD panel.• Unplug the Display if you are not going to use it for an extensive period of time.• Unplug the Display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your Display.• T o avoid the risk of shock or permanent damage to the set,do not expose theDisplay to dust,rain,water,or excessivemoisture environment.• If your Display gets wet,wipe it with dry cloth as soon as possible.• If foreign substance or water gets in your Display,please turn the power off immedi-ately and disconnect the power cord.Then,remove the foreign substance or water,and send it to the maintenance center.• Do not store or use the Display in locations exposed to heat,direct sunlight or extreme cold.• In order to maintain the best performance of your Display and use it for a longer life-time, please use the Display in a locationthat falls within the following temperatureand humidity ranges.• Temperature: 0-40°C 32-95°F • Humidity: 20-80% RH• IMPORTANT: Always activate a movingscreen saver program when you leave your Display unattended. Always activate a periodic screen refresh application if your Display will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen.• "Burn-in", "after-imaging", or "ghost imag-ing" is a well-known phenomenon in LCD panel technology. In most cases, the “burned in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off. WarningFailure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “after-image” or “ghost image”symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty.Service• The casing cover should be opened onlyby qualified service personnel.• If there is any need for any document forrepair or integration, please contact with your local service center. (please refer to the chapter of "Consumer Information Center") • For transportation information, pleaserefer to "Technical Specifications". • Do not leave your Display in a car/trunkunder direct sun light.NoteConsult a service technician if the Display does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed.1.2 Notational DescriptionsThe following subsections describe notational conventions used in this document. Notes, Cautions and WarningsThroughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings.They are used as follows:Notetips that help you make better use of your computer system.CautionThis icon indicates information that tells you how to avoid either potential damage to hardware or loss of data.WarningThis icon indicates the potential for bodily harm and tells you how to avoid the problem.Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority.1.3 Disposal of product and packingmaterialWaste Electrical and Electronic Equipment-WEEEThis marking on the product or on its packaging illustrates that,under European Directive 2012/19/EU governing used electrical and electronic appliances,this product maynot be disposed of with normal household waste.Y ou are responsible for disposal ofthis equipment through a designated waste electrical and electronic equipment collection.T o determine the locations for dropping off such waste electrical and electronic,contact your local government office,the waste disposal organization that serves your household or the store at which you purchased the product.Y our new Display contains materials that can be recycled and reused.Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of.All redundant packing material has been omitted.We have done our utmost to make the packaging easily separable into mono materials. Please find out about the local regulations on how to dispose of your old Display and packing from your sales representative.T aking back/Recycling Information for CustomersPhilips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities.From the planning,design and production stages,Philips emphasizes the important of making products that can easily be recycled. At Philips,end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging material) in accordance with all Environmental Laws and taking back program with the contractor company.Y our display is manufactured with high quality materials and components which can be recycled and reused.T o learn more about our recycling program please visit/sites/philipsglobal/ about/sustainability/ourenvironment/ productrecyclingservices.page2. Setting up the Display2.1 InstallationPackage contentsDVIx 4PowerInstall base stand1. Place the Display face down on softand smooth surface taking care to avoidscratching or damaging the screen.Connecting to your PC322C6QHSGA C/DC power inputD VI inputV GA inputH DMI inputEarphone jack322C6QSGA C/DC power inputD VI inputV GA inputConnect to PC1.Connect the power cord to the back ofthe Display firmly.2.Turn off your computer and unplug itspower cable.3.Connect the Display signal cable to thevideo connector on the back of yourcomputer.4.Plug the power cord of your computer andyour Display into a nearby outlet.5.Turn on your computer and Display.If theDisplay displays an image, installation iscomplete.2.2 Operating the DisplayFront view product description2. Setting up the DisplayDescription of the On Screen Display What is On-Screen Display (OSD)?On-Screen Display (OSD) is a feature in all Philips LCD Displays. It allows an end user to adjust screen performance or select functions of the Displays directly through an on-screen instruction window. A user friendly on screen display interface is shown as below:322C6QHSG322C6QSGThe OSD MenuBelow is an overall view of the structure of the On-Screen Display. Y ou can use this as a reference when you want to work your way around the different adjustments later on.Main menuSub menuPictureOSD SettingsSetupLanguageColorInputPicture Format Brightness Contrast Horizontal Vertical Transparency OSD Time OutH.Position Auto V.Position Phase ClockResolution Notification Reset InformationEnglish, Deutsch, Español, Ελληνική, Français, Italiano, Maryar ，Nederlands, Português,Português do Brasil ，Polski ，Русский ,Svenska ，Suomi ，Türkçe ，Čeština ，Українська, 简体中文, 繁體中文，日本語，한국어Color Temperature sRGB User DefineVGA DVIHDMI (322C6QHSG)SmartResponse SmartContrast Gamma Over Scan8200K, 9300K, 11500K Audio(322C6QHSG)Volume MuteWide Screen, 4:30~1000~100Sharpness 0~1000~1000~100Off, 1, 2, 3, 45s, 10s, 20s, 30s, 60s0~100On, Off Yes, No 0~1000~1000~1005000K, 6500K, 7500K, Red: 0~100Green: 0~100Blue: 0~100Off, Fast, Faster, Fastest On, OffSmartKolor SmartTxt On,Off On, Off1.8,2.0, 2.2, 2.4, 2.6On, Off On, Off0~100Pixel OrbitingOn, OffResolution notificationThis Display is designed for optimal performance at its native resolution,1920×1080@60Hz. When the Display is powered on at a different resolution,an alert is displayed on screen:Use 1920×1080@60Hz for best results.Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.Physical Function2.3 SoftBlue T echnology introduction With Philips SoftBlue T echnology,it Protect your eyes from Blue Light damage.Studies have shown that just as ultra-violet rays can cause eye damage,blue light rays from LED displays can cause damage to different parts of the eye and affect vision over time.Philips SoftBlue feature uses a smart technology to reduce the harmful blue light waves without affecting the color or image of the display.3. Image Optimization3.1 SmartImageWhat is it?SmartImage provides presets that optimize display for different types of content,dynamically adjusting brightness,contrast,color and sharpness in real time.Whether you're working with text applications,displaying images or watching a video,Philips SmartImage delivers great optimized Display performance.Why do I need it?Y ou want a Display that delivers optimized display all your favorite types of content, SmartImage software dynamically adjust brightness,contrast,color and sharpness inreal time to enhance your Display viewing experience.How does it work?SmartImage is an exclusive,leading edge Philips technology that analyzes the content displayed on your screen.Based on a scenario you select, SmartImage dynamically enhances the contrast, color saturation and sharpness of images to enhance the contents being displayed - all in real time with the press of a single button.How to enable SmartImage?1.Press to launch the SmartImage onscreen display.2.Keep pressing ▲▼ to toggle among Office,Photo,Movie,Game,Economy and Off.3.The SmartImage on screen display willremain on screen for 5 seconds,or you can also press button to confirm.There are seven modes to select:T ext,Office, Photo,Movie,Game,Economy and Off.• T ext: Helps improve reading of text based application like PDF ebooks.By using aapplication like PDF ebooks.By using aspecial algorithm which increases thecontrast and boundary sharpness oftext content,the display is optimizedfor a stress-free reading by adjusting thebrightness,contrast and color temperature of the monitor.• Office: Enhances text and dampens brightness to increase readability andreduce eye strain.This mode significantlyenhances readability and productivity when you’re working with spreadsheets,PDF files, scanned articles or other general officeapplications.• Photo: This profile combines colorsaturation,dynamic contrast and sharpness enhancement to display photos and otherimages with outstanding clarity in vibrantcolors - all without artifacts and fadedcolors.• Movie: Ramped up luminance,deepened color saturation,dynamic contrast andrazor sharpness displays every details indarker areas of your videos without colorwashout in brighter areas maintaining adynamic natural values for the ultimatevideo display.• Game: Turn on over drive circuit for best response time,reduce jaggy edges for fastmoving objects on screen,enhance contrast ratio for bright and dark scheme,thisprofile delivers the best gaming experience for gamers.• Economy: Under this profile,brightness, contrast are adjusted and backlightingfinetuned for just right display of everydayoffice applications and lower powerconsumption.• Off: No optimization by SmartImage.3.2 SmartContrastWhat is it?Unique technology that dynamically analyzes displayed content and automatically optimizes a LCD Display's contrast ratio for maximum visual clarity and viewing enjoyment,stepping up backlighting for clearer,crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds.Why do I need it?Y ou want the very best visual clarity and viewing comfort for every type of content. SmartContrast dynamically controls contrast and adjusts backlighting for clear,crisp,bright gaming and video images or displays clear, readable text for office work.By reducing your Display's power consumption,you save on energy costs and extend the lifetime of your Display.How does it work?When you activate SmartContrast,it will analyse the content you are displaying in real time to adjust colors and control backlight intensity.This function will dynamically enhance contrast for a great entertainment experience when viewing videos or playing games.3.3 Philips SmartControl Premium The new SmartControl Premium softwareby Philips allows you to control your monitor via an easy to use on-screen graphic interface. Complicated adjustments are a thing of the past as this user friendly software guides you through fine-tuning resolution,Color calibration, Clock/Phase adjustments,RGB White point adjustment,etc.Equipped with latest technology in core algorithm for fast processing and response,this Windows compliant eye catching animated Icon based software is ready to enhance your experience with Philips monitors!Installation• Follow the instruction and complete the installation.• Y ou can launch after installation iscompleted.• If you want to launch later,you can eitherclick the shortcut on desktop or toolbar.First launch -Wizard• The first time after installation ofSmartControl Premium,it will automatically go to Wizard for first time launch.• The wizard will guide you throughadjustment your monitor performance step by step.Color menu• Color Menu allows you to adjust RGB,Black Level, White Point, Display Gamma, Calibration, SmartImage, and SmartKolor. • Y ou can follow the instruction and do theadjustment. • Refer to below table for sub-menu itembase on your input. • Example for Color Calibration.• Y ou can go to Plug-in menu to launchwizard later on as well. • Y ou can adjust more options withoutwizard by Standard pane.Start with Standard pane Adjust menu• Adjust Menu allows you to adjustBrightness, Contrast, and Resolution. • Y ou can follow the instruction and do theadjustment. • Cancel prompts user if you want to cancelinstallation.1."Show Me" starts color calibration tutorial.2.Start - starts the 6-step color calibrationsequence.3.Quick View loads the before/after images.4.T o return to Color home pane,click theCancel button.5.Enable color calibration - by default is on.If unchecked,does not allow for colorcalibration to happen,dimes out start and quick view buttons.6.Must have patent info in calibration screen. First Color Calibration Screen• Previous button is disabled until the secondcolor screen.• Next goes to the succeeding target(6-targets).• Final next goes File > Presets pane.• Cancel closes the UI and returns to theplug in page.SmartImageAllow users to change setting for better display setting based on content.When Entertainment is set, SmartContrast and SmartResponse are enabled.Eco Power menuOptions menuOptions>Preferences - Will only be active when selecting Preferences from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help andOptions tabs are available.• Displays current preference settings.• A checked box enables the feature. Thecheck box is a toggle. • Enable Context Menu on desktop ischecked (On) by default. Enable Context menu displays SmartControl Premium selections for Select Preset and Tune Display in the desktop right-click context menu. Disabled removes SmartControl Premium from the right click context menu.• Enable T ask Tray icon is checked (On) bydefault. Enable context menu shows the task tray menu for SmartControl Premium. A right click on the task tray icon displays the menu options for Help, T echnicalSupport. Check for Update, About, and Exit. When Enable task tray menu is disabled, the task tray icon will only display Exit. • Run at Startup is checked (On) by default.When disabled, SmartControl Premium will not launch at start or be in the task tray. The only way to launch SmartControl Premium is either from the desktop short cut or from the program file. Any preset set to run at startup will not load when this box is unchecked (Disabled). • Enable transparency mode (Windows7, Windows 8, Vista, XP). Default is 0% Opaque.Options>Audio - Will only be active when selecting Volume from the drop-down Options menu.On a non-supported display capable of DDC/CI, only the Help and Options tabs are available.Option>Auto Pivot.Options>Input - Will only be active when selecting Input from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. All other SmartControl Premium tabsare not available.• Display the Source instruction pane andcurrent input source setting. • On single input displays, this pane will notbe visible.Options>Theft Deterrence - Theft Deterrence Pane will only be active when selecting Theft Deterrence Mode from the drop-down Plug-in menu.T o enable Theft Deterrence, click on On button to bring up the following screen:• User can enter PIN between 4 and 9 digitsnumbers only. • After entering PIN, Accept button takesuser to the pop-up dialog box on the following page. • Minimum minutes set to 5. Slider set to 5by default. • Does not require the display be attachedto a different host to go into Theft Deterrence mode.After creating PIN, the Theft Deterrence pane will indicate Theft Deterrence Enabled and provide PIN Options button:• Theft Deterrence Enabled is displayed. • Disable Theft Deterrence Mode openspane screen on next page. • PIN Options button only available afteruser creates PIN, button opens secure PIN web site.Help menuHelp>User Manual - Will only be active when selecting User Manual from the drop-down Help menu. On a non-supported displaycapable of DDC/CI, only the Help and Optionstabs are available.Help>Version - Will only be active when selecting Version from the drop- down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs areavailable.Context Sensitive menuThe Context Sensitive menu is Enabled by default. If Enable Context Menu has beenchecked in the Options>Preferences pane, then the menu will be visible.The Context Menu has four entries:• SmartControl Premium - When selected the About screen is displayed.• Select Preset - Provides a hierarchical menu of saved presets for immediate use.A check mark shows the currently selectedpreset.Factory Preset can also be calledfrom the drop-down menu.• T une Display - Opens the SmartControl Premium control panel.• SmartImage - Check current settings:Off, Office,Photo,Movie,Game,Economy.T ask T ray Menu EnabledThe task tray menu can be displayed by right-clicking on the SmartControl Premium icon from the task tray.Left Click will launch the application.The task tray has five entries:• Help - Access to User Manual file:Open User Manual file using the default browserwindow.• T echnical Support - Displays the tech support page.• Check for Update - T akes the user to PDI Landing and checks the user’s versionagainst the most current available.• About - Displays detailed referenceinformation:product version,releaseinformation,and product name.• Exit - Close SmartControl Premium.T o run SmartControl Premium again,either select SmartControl Premium from Program menu,double-click the desktop PC icon,orrestart the system.T ask T ray Menu DisabledWhen the T ask Tray is disabled in the preference folder,only the Exit selection is available.T o completely remove SmartControl Premium from the task tray,disable Run at Startup inOptions>Preferences.All the illustrations in this section are for reference only.SmartControl software version might be changed without notification.Please /dtune/phl/enu/index to download the latest version of SmartControl software.3.4 SmartDesktop GuideSmartDesktopSmartDesktop is in SmartControl Premium. Install SmartControl Premium and select SmartDesktop from Options.• Align to partition check box will enableautomatic alignment for the window when dragged into the defined partition. • Select the desired partition by clicking onthe icon. The partition will be applied to the desktop and the icon will be highlighted.• Identify provides a quick way to view thegrid.Drag and Drop WindowsOnce the partitions are configured and Align to partition is selected a window can be dragged into the region and it will automatically align. When the window and mouse cursor are within the region,the region will become highlighted.If the outline of the region is not visible when dragging the window, “Show windows contents while dragging” is disabled. T o enable:1. In Control Panel, click System.2. Click Advanced system settings (For Vista & Win7 Win8 OS, this is located on the left sidebar)3. In Performance section, click Settings.4. In the box, check Show window contents while dragging, and click OK.Other alternative path:VistaControl Panel > Personalization > Window Color and Appearance > Click "Open Classic appearance properties for more color options" > Click "Effects" button > check Show window contents while dragging XP:Display Properties>Appearance>Effects...> check Show window contents while dragging Win 7:No other alternative path available.Win 8:Windows 8 is to right click on the lower left hand corner then select System > Advanced System Settings (Left side bar) > Performance section - Settings > Show Windows contents while dragging.Title Bar OptionsDesktop Partition can be accessed from the title bar of the active window. This provides a quick and easy way to manage the desktop as well as sending any window to any partition without having to drag and drop. Move the cursor into the active window’s title bar to access the drop down menu.Right Click MenuRight click on the Desktop Partition icon toview the drop down menu.1.Find Windows – In some cases,the user may have sent multiple windows to the same partition. Find Window will show all open windows and move the selected window to the forefront.2.Desktop Partition – Desktop Partition shows the current selected partition and allows the user to quickly change to any of the partitions shown in the drop down.If more than one display is attached,the user can select the targeted display to change the partition.The highlighted icon represents the current active partition.3.Identify Partition – Displays the outline grid on the desktop for the current partition.4.Align On/Align Off – Enables/disables the drag and drop auto align feature.5.Exit – Closes Desktop Partition and Display Tune.T o re-initialize,launch Display Tune from the start menu or short cut on the desktop. Left Click MenuLeft click on the Desktop Partition icon to quickly send the active window to any partition without having to drag and drop.Releasing the mouse will send the window to the highlightedpartition.T ask T ray Right ClickThe task tray also contains most of the features supported in the title bar (with the exception of automatically sending a window to anypartition).• Find Windows – In some cases,the user may have sent multiple windows to thesame partition. Find Window will showall open windows and move the selectedwindow to the forefront.• Desktop Partition – Desktop Partition shows the current selected partition andallows the user to quickly change to any of the partitions shown in the drop down.• Identify Partition – Displays the outline grid on the desktop for the current partition.• Align On/Align Off – Enables/disables the drag and drop auto align feature.SmartDesktop Partition Definitions4. T echnical SpecificationsNote1. EPEAT Gold or Silver is valid only where Philips registers the product.for registration status in your country.2.This data is subject to change without notice.Go to /support to download thelatest version of leaflet.3.Smart response time is the optimum value from either GtG or GtG (BW) tests.。
ffmpeg marginv的计算逻辑
ffmpeg marginv的计算逻辑1. marginv的计算是通过将视频帧上下留白来实现的。
The calculation of marginv is achieved by adding top and bottom margins to the video frame.2.这样可以改变视频帧的高度并在上下方添加边距。
This can change the height of the video frame and add margins at the top and bottom.3. marginv的值可以是正数，负数或者零。
The value of marginv can be positive, negative, or zero.4.当marginv为正数时，视频帧的高度会增加，而当为负数时，视频帧的高度会减少。
When marginv is positive, the height of the video frame will increase, and when it is negative, the height of the video frame will decrease.5.如果marginv为零，视频帧的高度将保持不变。
If marginv is zero, the height of the video frame will remain unchanged.6.通过调整marginv的值，可以改变视频帧的显示效果。
By adjusting the value of marginv, the display effect of the video frame can be changed.7. marginv的计算逻辑是基于像素的高度计算的。
The calculation logic of marginv is based on the pixel height.8. marginv也可以与其他视频处理选项结合使用。
Lorex Player 用户手册说明书
LOREX Player User ManualVersion 1.0LOREX Player Manual- 1 -Table of ContentsIntroduction to LOREX Player (3)LOREX Player Main View (3)Video display area (3)Application controls area (4)LOREX Player application controls (4)Tree view (4)Tree view buttons (5)Camera control (5)View control (5)Main window controls (6)Log view area (6)Full screen video (6)Launch LOREX Player application (7)Login to a user account (7)Application settings (7)Servers and cameras (9)Adding a camera location (9)Adding a camera (11)Editing previously entered properties (12)Viewing Video From a Live Source (12)Open a video window (12)LOREX Player apart view for full screen video (13)Control of PTZ Enabled Devices (14)Pan and tilt (14)Zoom (14)Home (14)Single frame capture (14)Recording Video (15)Location of archived video (15)Viewing Archived Video (16)Archive view (16)Browsing overview (16)Locating by date (17)The timeline zoom setting (17)Step backward / forward (18)Position of the playback head on the timeline (18)Slow / fast playback settings (19)Motion Settings (20)Access the motion settings dialog (20)Log Viewer (22)LOREX Player Manual- 2 -Introduction to LOREX PlayerLOREX Player is a stand alone application which may be used to access sources of live and archived video. For installation and hardware setup please refer to the Quick Start guide. LOREX Player Main ViewThe main view of LOREX Player is a full screen window, which is comprised of a video display area, an application controls area, and a log view area.Video display areaThe video display area occupies the left hand portion of the main view. It is a window in which sub windows containing live and archived video content are contained.Video windows, as well as containing live video from single or multiple cameras, may also be used to view archived video content. In this case, a time line and “VCR” style controls will be present. The usage of the various controls and settings present in video windows including the archive view timeline is covered later in this document.LOREX Player Manual- 3 -Application controls area LOREX Player applicationcontrolsThe LOREX Player application controls are always found on the right hand side of themain view.The application controls contain tools for selecting camera servers and individual cameras, for controlling cameras, and for the viewing, recording, and accessing of video content.Tree viewOne of these tools is a tree view whichfacilitates the discovery and selection of video sources, including cameras, from thenetwork.LOREX Player Manual- 4 -A group of six buttons, which are locatedbeneath the tree view in the applicationcontrols area, allows for the addition, removal, and the editing of the properties of the various accessible cameras and camera servers.Camera controlThe LOREX Player controls area also includesan area dedicated to the pan tilt zoom control of the individual cameras that are accessible to you, provided that the cameras themselves are equipped with these capabilities.View controlThe LOREX Player controls area contains another group of buttons whose function is to present the main view in one of three convenient formats.LOREX Player Manual- 5 -These formats are normal, log only, and video only, and they are illustrated as follows:normal log only video onlyMain window controlsFinally, the LOREX Player controls area includesthe top level application window controls such asapart view, minimize and exit.Log view areaLOREX Player creates an event log. Entries arecreated in the log for events such as connectingto or disconnecting from a camera, recording orstopping the recording of a camera's video, andthe accessing of archived materials. The logentries are displayed in chronological order in thelog view area.Full screen videoVideo windows can be maximized. Maximized video windows will occupy the entire video display area. A maximized video window will, when LOREX Player is in apart view, occupy the entire screen.LOREX Player Manual- 6 -Launch LOREX Player applicationTo begin using LOREX Player, double click the LOREX Player icon on the desktop.Login to a user accountclick the [OK] button.Note: The default username is ‘admin’and the default password is ‘admin’.Application settingsfrom the Tools sub menu. The application settings dialogwill appear.LOREX Player Manual- 7 -Slide Show Select the desired slide show step interval.Archive Path A directory structure containing files related to recordedvideo will be generated by LOREX Player. The top level ofthis directory may be set using this dialog. By default, this structure appearsin the root of the local drive (e.g. C/) and is called “LOREXVideoArchive”.Hardware AccelerationSelect this option if the system on which LOREX Player willrun has video acceleration hardware.Display Camera InfoSet annotations for the live video displayClick the [OK] button when done.LOREX Player Manual- 8 -Servers and camerasThe various networked devices that can be accessed from within LOREX Player are represented hierarchically in the tree view, which is present in the application controls area of the main view. The tree view control buttons, which are located below the tree view, enable the addition and removal of elements from the tree view, and also allow the properties of those elements to be set, viewed, and modified.There are three types of elements which can appear in the tree view .A location represents a group of devices on the networksuch as camera servers and cameras. A video serveris a device that supports access to one or morecameras. A camera represents a camera from whichvideo may be obtained.Adding a camera locationUse of the LOREX Player to access network enabled cameras begins with the addition of a location, to the tree view.Click the Add Camera Location button.Enter a name for the location and Click [OK].Enter a name for the camera server and Click [Next].LOREX Player Manual- 9 -Enter the nine digit IP address of the server inthe Address field.Enter the port number in the Port field.Click [Next].If the camera server in question is configuredfor a username and password (generally agood idea), enter these and Click [Next].Click [Finish] to add the camera server to thetree, orClick the [New] button to define a camera forthe server.LOREX Player Manual- 10 -Adding a cameraThe final step in the setup of a camera server is to provide the information required to access one or more cameras.Name A name for the camera.Cam Port This number is an hardware specific code that allowsthe device to be identified as a video source.Enabled This status flag can be used to enable or disable theuse of the camera.Format Select a video encoding format.Size Select Small, Medium, or Large.Quality Select Low, Medium, or High. This determines the image compressionsetting.Flip Vert Change the presentation of the image.Flip Hor Change the presentation of the image.Rot CW 90Rotate the image +90 degreesRot CCW 90Rotate the image -90 degreesThe availability of Image adjustments may dependon the hardware and local configuration of the camera.Max Fps The maximum number of video frames from the cameraallowed to be delivered and recorded per second.Recording Select the option which describes the type or typesof events which may cause recording to be initiated.Type Set to IntegratedCom Port This field is not used.Enabled Select this option to enable PTZ control of the camera.LOREX Player Manual- 11 -Editing previously entered propertiesProperties associated with the various elements present in the tree view may be viewed and edited as follows:Click on the element in the tree viewand then click on the appropriate view settings button.Alternately, right click the element in the tree view andselect the appropriate menu option.Viewing Video From a Live SourceOnce a control server has been added, you may get LOREX Player to initiate a connection. Open a video windowTo open a video window, right-click andselect Open Camera View ordouble click the icon of the camera in the treeview.You can view multiple cameras at the sametime by repeating this step for each camera.LOREX Player Manual- 12 -LOREX Player apart view for full screen videoClick the apart view icon.Right click within a video window and then selectthe Maximize menu option.Repeatedly stepthrough all open video sourcesWhen two or more video windows are open in theLOREX Player, the Slide Show button will becomeactive.Click the Slide Show button to enable the Slide Show.This means that each open video window will bemaximized and brought to the front for a certaininterval of time (5 seconds default).LOREX Player Manual- 13 -Control of PTZ Enabled DevicesThe camera control section of the application controls area provides a way totarget specific areas of interest within a PTZ capable camera’s range. The controls will become active when the camera’s video window is active. (This can be ensured by clicking the video window.)Pan and tiltClick on the directional arrow buttons of the PT controller topan and tilt a camera.ZoomClick and drag the zoom indicator control to determine thezoom setting of a camera.HomeClick on the Home button to cause a camera to return to it’sdefault PTZ position.Show / hide PTZ controlsClick the Settings button and select the Show Controlleroption from the View sub menu.Single frame captureThe [Capture] button is located in the toolbar of a video windowbelow the video area. Click this button to capture the currentframe of video as a still image.LOREX Player Manual- 14 -The image capture window will pop up overthe main view. To save the image, click the[Save] buttonA file chooser dialog will appear and allowyou to name and save the image as a .jpgfile.Recording VideoIt is possible to start and stop the recording of video in threedifferent ways.Start and stop recording by clicking the record button on thetoolbar of a video window.Alternately, right click within a video window and select theStart Recording orStop Recording menu option.Start Recording and Stop Recording menu options also becomeavailable by right clicking on a camera icon in the tree view.Location of archived videoA directory structure containing files related to recorded video will be generated by LOREX Player. The top level of this directory may be set in the application settings dialog.By default, this structure appears in the root of the local drive (e.g. C/) and is called “LOREXVideoArchive”.LOREX Player Manual- 15 -Viewing Archived VideoA number of controls exist to enable the locating , browsing, and analyzing of archived video. These controls become available when an open video window (representing a video source) is set to Archive view.Archive viewClick the drop down button on the toolbar of a video window andselect the Archive menu option to turn on archive view.Archive view may be distinguished from live view by the presence of a timeline in the video window.Browsing overviewIt is essential that relevant archived video be located quickly and accurately. For example, to locate a segment of archived video in which the occurrence of a certain incident has been captured, you may wish to select a starting date and then view all the following or preceding video in an accelerated presentation, pausing when the sought incident is identified. Following this, you may wish to narrow down the hour, minute, and second of the occurrence, and then to inspect individual consecutive frames.LOREX Player Manual- 16 -Locating by dateClick the Date/Time Picker button to activate theDate/Time Picker.Select the date on whichthe sought archived video wasrecorded.You may also input a time using theTime input field. It may be moreconvenient, however, to ignore theTime input field and instead browsethe timeline.Click the [OK] button.The timeline zoom settingThe timeline may be designated to display the existence of archived video for a given day, hour, or minute.Use the Time Zoom dropdown control to select a timeline zoom setting.LOREX Player Manual- 17 -Notice that the timeline scrollbar is shifted fully to the right. We can see that the highest number in the timeline graticule is 23 because the Time Zoom control is set to the 24 hour zoom setting.In this instance, the Time Zoomcontrol is set to the 1 hour zoomsetting, and, as a result, 59 is thehighest number in the timeline. (60minutes in an hour.)Step backward / forwardClick the Step Ahead and Step Back buttons to traversethe intervals of time preceding and following the currentinterval displayed.The amount of time moved per click is the same as theinterval displayed in the Time Zoom control.Position of the playback head on the timelineSegments of archived video will appearon the timeline as light blue bars.Click on the timeline to position theplayback head. The playback head isrepresented by a thin dark blue verticalbar on the timeline.LOREX Player Manual- 18 -Playback and frame step through“VCR” style controls are present in thetoolbar of video windows.These buttons allow forward and reverseplayback, forward and reverse singleframe step through, and single clickpositioning of the playback head to theend or beginning of archived videosegments.Slow / fast playback settingsA variable speed “visual search”functionality is achieved through useof the Play FPS and Playback Speedcontrols.The selected option in the firstdropdown list determines themaximum number of frames persecond that will be displayed duringplayback. For example, selecting asmall number will allow slower thanreal time playback, similar to jog /shuttle functionality.The selected option in the second dropdown list determines the number of frames of archived video skipped for every frame actually displayed during playback. For example, selecting a high number will allow the browsing of a lengthy segment of archived video in a short period of time.The image capture button may be usedwhen viewing archived as well as livevideo.LOREX Player Manual- 19 -Motion SettingsLOREX can detect motion within a video frame and log the motion generated events, which will appear in the archive view timeline. Recording can also be automatically triggered by motion generated events.What constitutes motion within a video frame is determined by three motion perception threshold settings, and a user defined active area.Access the motion settings dialogTo access the motion settings dialog from LOREX Player:Click the controller button in the LOREX Playervideo window live view toolbar and select theMotion menu option.Motion settings DialogWhen the Motion Settings dialog isactive, a grid will appear in it’sassociated video window. Areas ofthe grid which appear green indicatethe active zone. Only motionsoccurring within the active zone maytrigger the recording of video andthe logging of motion events.Red translucent squares indicatethe presence of motion within thevideo frame, as this example of amoving bus demonstrates.To define the active zone, click anddrag within the video window tohighlight the grid squares which areto comprise the active zone.LOREX Player Manual- 20 -Use the [Select All] and [Clear All] buttons in theMotion Settings dialog to select or deselect the entire videoframe as the active zone.The display of detected motion within a video window may belimited to the active zone with the selection of the Show motionin zone only option.Adjust the Threshold and Sensitivity sliders to determine theappropriate settings where relevant movement is perceived asmotion and background noise or irrelevant movements are not.A good way to find this balance is to adjust the sliders so thatan excess of detected movements appears, and then continuethe adjustments so that the unwanted noise is filtered out andonly legitimate movements within the frame are perceived.The Record slider determines the number of grid squareswhich must be simultaneously in a state of motion perception inorder to result in the recording of video and / or the logging of amotion event.Once the desired level of motion detection sensitivity has been established, click the [Apply] button in the Motion Settings dialog.Ensure that the Motion or Motion Only option isselected in the appropriate Camera Settingsdialog.LOREX Player Manual- 21 -Finally, to enable motion initiated recording, click the record button in the video window toolbar.Notice that the word “Motion” appears inthe status bar during the recording ofmotion initiated events.Motion events can be verified in archiveview by observing the appearance of thetimeline.The red bars indicate logged motionevents.Log ViewerTo access the log viewer from LOREX Player, click the [Settings] button and select the Log History option from the View sub menu.The log viewer permits browsing of all events related to the operations of a specific LOREX Player. One full day’s events are displayed at a time. The events displayed may be filtered by type and / or group.Use the dropdown list to select from a list of days for which log information exists.Use the [Delete] button to delete the log file for the presently displayed day.LOREX Player Manual- 22 -LOREX Player Manual- 23 -。
短视频营销对女装消费者购买意愿的影响
引言短视频营销作为一种新兴的内容营销形式，在我国线上购物领域的应用还处于探索阶段，因此也是热点问题。
目前国内学者探究短视频营销策略时主要集中于短视频平台对图书、影视、化妆品等领域的营销策略，而服装类短视频对消费者购买意愿方面研究较少。
因此，本文总结短视频营销的特征，建立理论模型，来阐述服装短视频对消费者的购买意愿的影响。
论证出对消费者购买服装类产品的主要影响因素，为短视频内容创作者以及企业短视频运营者提供合理的理论支撑和借鉴参考。
一、研究假设与理论模型（一）短视频营销与消费者购买意愿之间的关系短视频营销手段中，有很多因素会影响消费者对于服装产品的选择，其中短视频的不同展示形式会直接影响受众对该短视频的第一观感，也直接影响到观看者下一次能否刷到该视频；短视频的展示内容和产品信息则影响到消费者是否对该短视频展示的服装感兴趣，是否产生购买欲望。
其中，Bhatti、Bouch 和Kuchinsky 研究发现，使用比较吸引人的展示形式来展示服装，能够给消费者带来一定程度的心理愉悦感和体验安全感[1]；Benbasat 和Jian 在研究中发现，产品视频的展示类型可能会对消费者的认知和情感维度产生不同的影响，从而对消费者购买意愿产生影响[2]；短视频展示内容是短视频的整个主体，是视频创作者向视频受众所传递的核心信息，直接影响消费者、视频受众对于产品信息的认知程度和情感刺激程度；石文奇等在研究中发现服装短视频展示信息内容的有用性和易用性显著正向影响用户的购买意愿[3]；对产品信息的认知是拉近消费者与产品之间距离的直接途径，产品信息的获取直接影响产品的销售，林婷婷和曲洪建在研究中发现产品信息要素会增加服装消费者的购买意愿[4]。
由此，本文提出以下假设：H1:短视频展示形式正向影响消费者购买意愿。
H2：短视频类型正向影响消费者购买意愿。
H3：短视频展示内容正向影响消费者购买意愿。
H4：产品信息正向影响消费者购买意愿。
AV基础培训
水平扫描速率: • 每一水平线移动的速率. • KHz (thousands of times per second)表示
计算机视频分辨率带宽计算
• 带宽 = 水平象素 x 垂直线数 x 刷新率 x 1.5
例如 XGA@60Hz
BW = 1024 x 768 x 60 Hz x 1.5 BW = 786,432 x 60 Hz x 1.5 BW = 47,185,920 x 1.5 BW = 70,778,880 BW = 71 MHz.
D [7:0] C0 C1 DE
T.M.D.S. Link (DVI cable) T.M.D.S. receiver
Recovery / Decoder
BLU [7:0] HSYNC VSYNC DE0 GRN [7:0] CTL0 CTL1 DE1 RED [7:0] CTL2 CTL3 DE2
REFRESH RATIOS (Hz)
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75
计算机视频分辨率及带宽
RESOLUTION H-Pixels V-Pixels
640 800 800 854 320 432 240 160 480 1024 1024 1280 1152 1440 1280 1400 1680 1600 1920 2048 2560 2048 2560 3200 3200 3840 480 600 480 480 240 240 160 120 320 576 768 768 864 900 1024 1050 1050 1200 1200 1536 1600 1152 2048 2048 2400 2400
路虎发现3车载导航系统说明书
Instruction manual for car navigation system of Landrover Discovery3Dear Users£ºThank you so much for using our navigation system. our navigation system can help you enjoy your driving. This system really incarnates the characters of "safety, high quality & human design". To make sure you can operate this navigation system smoothly, we strongly suggest that you can read this manual before you begin to use it.IntroductionThis manual uses icons to show you how to operate this system correctly and what are the potential dangers for the incorrect operation. Please understand the meanings of each icon. This can help you operate this system correctly and effectively.This icon is to warn the importance of this instruction.Your disregard for the details may cause hurt or damage.This icon is to warn the importance of this instruction. Y our disregard for the details may cause hurt or damage.Please note this. With the quick development of traffic facility & structure, it may appear that the data of navigation map is not completely the same as the actual road traffic guide. Under this condition, please drive according to the actual road traffic guide. At the same time, please contact with the distributer of this system as soon as possible to update the data of map.This system is only used to supply some assistant tips during driving. Our company will not bear any responsibility for the damages or accidents, which is caused for your uses of our system, while driving. The technical specification, design and icons of this navigation system may be changed and be different from the description in the manual. W e will reserve the right for update without notice.We strongly suggest reading this instruction manual as well as other manuals of audio systems of the car, before using this system. Please operate this system according to the instructions of the manual.Otherwise, your incorrect operation may cause troubles or even dangers. Our company will not be responsible for these, which are caused for your incorrect operation..............................................................................2. (5)1.1 .............................................................5.. (6)2.1 (6)2.2 (6)2.3 ........................................................................7.. (8)3.1 (8)3.2 Bluetooth (9)3.3 (10)3.4 TV (11)3.5 (11)3.6 (11)3.7 (12)3.7.1 (12)3.7.2 (13)3.7.3 Photo (14)3.8 (15)3.8.1 (15)3.8.2 (16)3.8.3 (16)3.8.4 (16)3.8.5 Bluetooth.......................................................................... 17..................................................18.. (20)Safety attentions Chapter One Product Instruction Product Characteristics Chapter Two Introduction of buttons & basic operation Diagram of buttons Function introduction of each button Basic operation Chapter Three Function application Function application DVD player Navigation .................................... Rear view Camera B Audio player Video player Setup Date/time Calibrate Volume System ......................................Chapter Four T rouble shooting Chapter Five Maintenance and repairs ContentDrivers are not allowed to operate this system, while driving.If driver operates this car while driving, it may lead to traffic accident, as the driver has to pay attention to operate the system & fail to watch the road situation carefully. Therefore, it is a must to stop the car in a safe place and pull up the handbrake, before operating the unit.Please keep the batteries off from children.Children may swallow the batteries. This will cause danger to children. Therefore, please keep the batteries in the place child can not reach it. In case child swallows the battery, please go to the hospital as soon as possible.Do not take apart or revise or repair this system by yourself. Please contact the nearest authorized repair station for repairs. Do not use the system , which can not work normally.If the system works abnormally, please contact the nearest authorized repair station as soon as possible to handle it. In case the system explores in the water or gives out smoke, please never power on the system. Otherwise, the system will be destroyed and cause dangers.Attentionsremote may slip under the brake footbrake, which will affect the driving & then cause traffic accident.To make sure the safe driving, please keep low volume so that the driver can hear the voice outside of car & pay attention to the road situation.Pleas keep this system away from water or damp or dust. Water or dust can cause fire or lead to other damages to thissystem. Therefore, please keep this unit away from the damp or dust environment.case the screen is broken, please bear in mind not to touch the broken glasses or liquid. Please make sure to flush the broken glass or liquid and handle it completely, in case you have touched glasses or liquid. Otherwise, it may cause hurts to body. It is possible that there are some tiny black or white pixels to appear on the LCD panel. This is normal. The characteristics of panel lead to pixels.Attentions: Please obey the following instruction strictly.AttentionsAttentionsUnder the condition of low temperature, the display seems alittle dark or responds a little slowly. Once the temperature goesup, the display will restore. This is normal for the system.A fter the system turns on, the antenna of navigation needsome time to receive satellite signal & update the internalmessage. Therefore, the system need cost a little time to runnavigation function.tunnels or high buildings. These buildings may affect thereceiving of GPS signal.setup the system.TFT LCD screen Transparent touch panel Resolution: 800*4802 Brightness: 300cd/m Contrast: 350:1 CPU: 400mhz, Built-in Media Accelerator Engine 128DDR RAM 128MB NAND Flash, SD card(compatible with 2G & 4G) Navigation: 3D map display, human voice guide, routine plan & automatic routine search MP3/MP4 player(The following formats are only for reference. It is possible some files can not be played smoothly.) The file which is bigger than 720*576 may not be played smoothly. And the system will show relevant tips for the playing condition so that users can check whether to continue playing or not. We strongly suggest to setup the file to be smaller than 720*576.Audio playing Format MP3/WMA/ASP/OGG/WA V Labels 1D3VI labeled with ED3 V22. 0, V23.0Video playing FormatReal time/date displayTouch panel controlWorking temperature: -10 -60 ¡æWorking V oltage: DC9-18VPower consumption: ¡Ü15WC C Chapter One Product Introduction1.1 Characteristics of the systemA VI(MPEG-4 simple profile, Divx3, 11, 4.0, 5.1, Xvid)WMV, ASF, MPEG1/MPEG2/DA T Car navigation SystemImage Browser Format Resolution Bit rate JPG, BMP, GIF, PNG BMP: 2048*1536, GIF:1024*768 Max. 1.5Mbps JPG, PNG, 1926*1444Car navigation SystemOn/offMenu1.2.Chapter Two Introduction of buttons and basic operation2.1 Diagram of the buttons 2.2 Introduction of buttons21A button to turn on/off the system:The system is set to power on automatically with theignition. Press this key for a very short time to return the main OSD interference. And press this key for a little long time to power off the system. When the system is off, press this button to power on it.Menu:A button to return back to main OSD interference.Car navigation System2.3 Basic operationTurn on/off the systemThe system will turn on automatically with ignition. Then the system will enter the interference of main menu within 15 seconds. Function shiftsThe system will forbid doing any function shifts, unless the car stops & its hand brake is pulled up. But please notice the following items.The system can not play movie and music at the same time.The system can run movie or music with "setup" function at the same time.The system can run movie or music with "navigation" function at the same time.The system can run TV playing or navigation at the same time. (Please note: TV is optional function).Car navigation SystemChapter Three Function ApplicationOperation while driving3.1 Function applicationa . While the hand brake is pressed down, the system will turn to the GPS navigation interference automatically. At this time, the "OSD" key will be locked and can not work.b . The system can not do any function shift until car stops running and the hand brake is pulled up. And the display of dashboard shows "P".interference as the follows:The current date/timeThere are six icons under the interference of OSD: Bluetooth/ DVD/TV/NAVI/USB/SD/SETUP. Touch the relevant icon to activate the relevant function.1)Start Bluetooth of mobile phone.2)Search Bluetooth hardware.3)Select ONTOPPAT 4)Mobile phone will begin to connect the Bluetooth.5)Input code: 88886)Car navigation SystemClick "Bluetooth" icon to activate Bluetooth Function. One: Pair the mobile phone and our system.Two: Bluetooth enjoys priority with prompt of incoming call.No matter which function is working, including SD/USBreading/AUX IN/Navigation/DVD playing, the system willshift to Bluetooth interference automatically. While driving,driver can choose to answer or reject the incoming calling. Ifthere is no answer within 10 seconds, the system will go backto the navigation interference. Please note: the voice guidefrom navigation may be missed, while listen to a call or callout.Answer Hang up Redial Exit3.2BluetoothCar navigation System3.3 DVD playerOur system can work with DVD changer or DVD player, which can be controlled by touch panel. (But please note, the system cannot control the DVD or DVD changer, until our system has done suitable software to match the remote code of DVD changer or DVD player).Car navigation System3.5 Navigation3.6 Rear view cameraAttention:3.4 TV Click "Navigation" icon or press "navi" on the remote to activate GPS navigation function. Please refer to the manual of GPS navigation for details.1. GPS Navigation: The files in "Navione" file folder are navigation programs. Never delete any file in it. Otherwise, it will lead to program exception.2. Update of map: Please store the updating file in the USB flash memory.The rear view function is only an assistant function for parking. It can not be the basis for a judgment.Once the car is reversing (the shift lever is located on R place), the display of the system will shift to display the images from the rear view camera, no matter what current image it is. Once the car finishes backing up, the image displayed by the system will go back to the former image. Please note that the playing of MP4 will be stopped, if the system shifts to the rear view image while MP4 is playing.While the system is standing by, the reversing of car can let the TFT display open automatically & the rear view image will be visible. A fter car stops reversing, the system will go back the interference of main menu. And then the system will go back to the standby condition after 5 seconds.Click "TV" icon of OSD to activate the function of TV and then the system will enter TV interference. As different TVmodule may have different TV operation interference, we will not describe it specifically. Please operate according to theactual TV module.Insert "USB" flash disk into USB slot & click the "USB" icon to enter USB interference. There we can find three applications for "CINEMA", "PHOTO" and "MUSIC" for select. Please choose the application you prefer. And then click the program name forplaying. To exit USB interference, please click " "on the left upper corner. Please make sure format of files can be compatible with our system.The format of USB memory: FA T32Car navigation System3.7.1Audio player3.7 USBClick "USB" icon to enter "USB" interference. (Please note: Some USB files can not be compatible).Click "CINEMA", "PHOTO" or "MUSIC" icon to boundout relevant file folder or program list. If programs are stored in file folder, please click file folder to open the program list.Return ExitCar navigation System3.7.2 Video playerClick "MUSIC" icon to start audio player; Or click audio file from "file list" & then click for playing;Click "CINEMA" icon and the "file list" will appear. There click your prefer movie or click a file folder to find & click your prefer movie. Finally, click to start playing.Play/Pause Stop Prev/Next Loop ReturnCar navigation System3.7.3PhotoThe interference of video playing is as the follows.Please note: the playing axis will not work here. Therefore,we can not push it to play forwards or backwards.In the interference of video playing, the messages of playingcan be shown, including the current playing improvement ¤t playing time. And we can operate the playing as we like,for example, Play/pause/stop the video file or display the imagefull of screen. Click for full screen display. While the imageis displaying full of screen, touch the display area of image toget back the normal display area.Click "Photo" icon and the system will show the followingmenu. There we can read, delete or even revise the files in thesystem or USB flash memory. The compatible file formats include BMP/JPEG/GIF/PNG.Play/Pause Stop Prev/Next Full Screen ExitCar navigation System3.8 Setup3.8.1 Date/TimeFull screen 16:9/4:3 Auto Prev/Next ExitClick "Setup" icon to enter into the interference of "setup". There we can setup date/time, parameter of volume, system message & calibration of touch panel & Bluetooth etc.Click "Date/time" to make setup for DATE/TIME by clicking the "¡ø" or "¨‹" icons.¡¡Car navigation System3.8.3 V olume3.8.4 System3.8.2 CalibrateClick "setup" icon in the interference of main menu to get into the submenu. There, please click "calibrate" and then "Start" to calibrate touch panel control. A fter the system begin to calibrate touch panel, a symbol of "+" will be found in the centre of the panel. Just click it & then "+" will appear on each corner of the panel. Click the "+" till it disappears. Finally, the system will exit automatically.1) Click "V olume" to enter the interference of volume setup.There click "+" to increase volume and "-" to decrease volume.During the setup of volume, the volume scale bar will display. Click "system" to check the capacity of USB message.3.8.5 Bluetooth LG Kg800 LG KE970Motorola L6 Motorola V3i Motorola K1Nokia 6103 Nokia 6233 Nokia 6120CNokia N70 Nokia N73 Nokia N80 Nokia 8800 Samsung D900 Samsung E760Samsung P310 Samsung E890 Samsung P300Palm Treo 750DOPOD D802HTC MTeoR :Click "Bluetooth" to setup the connection way of Bluetooth.Select "Auto", the system will search mobile phone and pair with it automatically.Select "Manually", the system will not search for phone facilit y until we operate it manually to do this.Car navigation SystemPlease note: The system can match with followingmodel s.(As mobile phones are updated or replaced continually, the following phone modes are only for reference. Please forgive without further notice).Guides of trouble shootingChapter Four Guide of Trouble ShootingGuides of trouble shootingAttentions:The follows are guides of trouble shooting, which can help you solve some familiar troubles. Once it can not be solved, please contact the authorized repair station for repairs. Please never take part the system by yourself, otherwise, it may cause serious bad results.Description of troublesReasons How to solve No power Not ignited yet.Battery of car hasbeen run out of.Ignite the car at first.Recharge the battery.No voiceSet too low volume to be heard.Set a bigger volume.Please refer to "3.8.3" for details.Panel contro l Not calibrated touch panel yet.Calibrate the touch panel.Please refer to "3.8.2" for details.No work of touch panel The system is still running some program (route search, etc). Please wait for a moment. If it can not work for long time,please contact repair stations.No Signal o fG P SThe system did notrecognize its GPS navigation signal.Turn off the system and then restart it.Failure to position It is possible the system is located in the area GPS signal is not covered.Please try to move the car toanother area to see whetherthe GPS signal can restore.If still failed, please contact repair station for repair.Bad touchGuides of trouble shootingDescriptionof troublesReasons How to solveBlack display The system turnsoff the backlight.Touch the LCD screen to turn on the backlight.Failure to get navigation Please contact repair station to update map.Failure to find destination.Firstly, check & confirm the correct place name., try to input another n ame of t he destination.If failed again, it means the place does not include in the data of navigation.Get bad guide from navigation. For example, the system select a longer routine to destination.The system may takemany factors intoconditions, not onlylimited to the distance.For example, the rateof road, traffic rules,main road and so on.Generally, it will workout a shortest road forusers.the routine refresh.No map shown It is possible the displayscale of map is toosmall or too big to beseen.Please try to adjust thedisplay scale to see whetherthe map can be restored. Iffailed, it is possible thesystem loses the position ofnavigation. Please selectanother mark refresh.The system is locatedin a blind area ofnavigation.The place name isnot in the data ofnavigation.Please selectSecondlyMaintenance&RepairsChapter Five Maintenance & repairsThe system is a precise electronic unit with fine design and exquisite craftworks. Please use it carefully. Please obey the following suggestions to prolong the work life of the system.Please keep the system and relevant accessories away from children.Please keep a dry working environment for the system. Rain, dampness or other liquids may hurt the electronic circuit or even destroy the system.Please keep a clean working environment for the system.Dust can damage the visible part of the system.Please try to avoid locating the system in too hot place. High temperature can shorten the electronic working life or cause deformation of structure.Please try to avoid locating the system in too cold place.While the temperature goes up, it may lead to damp. This damp can hurt the electronic circuit.Please never take the system into parts by yourself. Non professional staff may damage the system.Please never wash or clean the system with chemical things or detergent.Please use soft & clean clothes to wipe this system.Please keep the system away from magnetic or radioactive equipment.Please never use any sharp object to click the touch panel. It may cause permanent hurt to the panel. The touch pen has been attached. Please use the pen for operation.。
Philips 显示屏说明书
Philips Signage Solutions Video Wall Display47"Direct LED Backlight Full HD 500 cd/m²BDL4777XLCreate new stopping powerwith Ultra-Narrow Bezel displaysImpress your audience with the most impactful video wall. With ultra-narrow bezel and stunning picture quality, you are sure to create the most memorable visual experienceOptimised for public viewing•Full HD LED technology for brilliant images•IPS wide view technology for image and colour accuracy •Designed for 24/7 operationMaximising the impact of your message•Immersive visual experience with Ultra-Narrow Bezel •Colour Calibration kit to ensure uniform colours•Manage and control your video wall remotely via SmartControl Innovative solutions for any signage application •Optional OPS Insert to create an all-in-one solution Care about you, your business and your audience •SmartPower for energy saving•Keep your content up and running with FailOverHighlightsFull HD LED technologyWhite LED's are solid state devices which light up to full, consistent brightness faster saving startup time. LED's are free from mercury content, which allows for eco-friendlyrecycling and disposal process. LED's allow for better dimming control of the LCD backlight, resulting in a super high contrast ratio. It also gives superior colour reproduction thanks to consistent brightness across the screen.IPS Display TechnologyPhilips IPS displays uses an advanced technology, which gives you extra-wide viewing angles of 178/178 degrees, making it possible to view the display from almost any angle — even in portrait mode. IPS displays give you remarkably crisp images with vivid colours, particularly suitable for professional video wall and menu board applications, which demand colour accuracy and consistent brightness at all times.Ultra-Narrow BezelThe next generation of video wall displays is designed with the industry's narrowest bezels and advanced alignment solutions. Fully exploit your impactful signage content with ultra-narrow bezel displays, and make sure yourmessage does not get lost in thick bezels. With the ultra-narrow bezels you can createseamless video wall configurations of virtually any size.SmartControlConnect and control your video wall from a central admin computer. SmartControl is display-based software for managing your network of displays from a single location via RJ45 and RS232. Easily identify your displays and fine-tune all display settings including resolution, brightness, contrast and SmartPower.Advanced Colour CalibrationThe Advanced Colour Calibration kit controls the luminance of the backlight, standardises the gamma curve and calibrates the greyscale of your display network. Whether you have an impressive video wall, a catchy mosaic layout, a menu board installation or a control room, each display can be adjusted to the same colour values. With this optional kit you can ensure consistent colour performance over all displays in your network.FailOverKeeping your content up and running is critical for demanding commercial applications. While it is unlikely you will face a content disaster, FailOver provides content protection with a revolutionary technology that plays back-up content on screen in the event of a media player failure. FailOver automatically kicks in when the primary input fails. Simply select a primary input connection and a FailOver connection and you're ready for instant protection.SmartPowerThe backlight intensity can be controlled and pre-set by the system to reduce the power consumption by up to 50%, which saves substantially on energy costs.OPS InsertTurn your display into an all-in-one digital signage solution and create a display network that is connected, intelligent and secure. Open Pluggable Specification (OPS) is an industry-standard slot into which you can add an OPS-standardised media player. This cable-free solution gives you the ability to install, use or maintain your hardware whenever you need to.Designed for 24/7 operationBecause business never sleeps, our signage displays are designed for 24/7 use. Taking advantage of superior components to ensure a higher level of quality, you can count on this range of models for complete around-the-clock reliability.Issue date 2022-04-21Version: 2.1.112 NC: 8670 001 25161EAN: 87 12581 73336 0© 2022 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.SpecificationsPicture/Display•Diagonal screen size: 46.9 inch / 119.2 cm •Panel resolution: 1920 x 1080p•Optimum resolution: 1920 x 1080 @ 60 Hz •Brightness: 500 cd/m²•Contrast ratio (typical): 1400:1•Dynamic contrast ratio: 500,000:1•Response time (typical): 12 ms •Aspect ratio: 16:9•Viewing Angle (H / V): 178 / 178 degree •Pixel pitch: 0.54 x 0.54 mm •Display colours: 1.06 Billion•Picture enhancement: 3/2 - 2/2 motion pull down, 3D Combfilter, Motion compens. deinterlacing, Progressive scan, 3D MA deinterlacing, Dynamic contrast enhancementSupported Display Resolution•Computer formats Resolution Refresh rate 640 x 480 60, 67, 72, 75 Hz 800 x 600 56, 60, 72, 75 Hz 1024 x 768 60 Hz 1280 x 768 60 Hz 1280 x 800 60 Hz1280 x 102460 Hz 1360 x 768 60 Hz 1366 x 768 60 Hz 1440 x 900 60 Hz 1600 x 1200 60 Hz 1920 x 1080 60 Hz 1920 x 1200 60 Hz •Video formatsResolutionRefresh rate 480i 60 Hz 480p 60 Hz 576p 50 Hz 576i 50 Hz 720p 50, 60 Hz 1080i 50, 60 Hz 1080p 50, 60 HzConnectivity•Video input: DisplayPort (1.2), DVI-D, HDMI, VGA (Analogue D-Sub), Component (BNC), Composite (BNC)•Video output: DVI-I, VGA (via DVI-I)•Audio input: 3.5-mm jack, Audio Left/Right (RCA)•Audio output: Audio Left/Right (RCA), External speaker connector•External control: IR (in/out) 3.5 mm jack, RJ45, RS232C (in/out) D-Sub9•Other connections: OPSConvenience•Signal Loop Through: RS232, VGA, DVI, IR Pass-through•Ease of installation: Carrying Handles•Energy-saving functions: Ambient light sensor, Smart Power•Network controllable: RS232, RJ45, Card OPS RS232, One Wire (HDMI-CEC)•Placement: Portrait, Landscape•Screen-saving functions: Pixel Shift, Low Bright •Tiled Matrix: Up to 10 x 10Dimensions•Bezel thickness: 4.9 mm•Bezel width: Top/Left: 3.20 mm, Bottom/Right: 1.70 mm•Set dimensions (W x H x D): 1044.9 x 590.0 x 108.8 mm •Product weight: 25.5 kg•VESA Mount: 400 x 400, 400 x 200, 200 x 200 mm, M6•Smart Insert mount: 200 x 100, 100 x 100 mm, M4Operating conditions•Temperature range (operation): 0 ~ 40 °C •Temperature range (storage): -20 ~ 60 °C •Altitude: 0 ~ 3000 m•Relative humidity: 20 ~ 80 %•MTBF: 50,000 hour(s)Power•Consumption (On mode): 86 W (EnergyStar 6.0 test method)•Standby power consumption: <0.5 WSound•Built-in speakers: 2 x 10 W (RMS)Accessories•Included accessories: Remote Control, Batteries for remote control, AC Power Cord, VGA cable, RS232 cable, IR sensor cable (1.8 M), User manual on CD-ROM, Quick start guide, Edge alignment pins, Edge alignment plates•Optional accessories: Edge finishing kit,ColourCalibrationKit (CCK4601), HDBaseT OPSReceiver (CRD25)Miscellaneous•On-Screen Display Languages: Arabic, Simplified Chinese, Traditional Chinese, English, French, German, Italian, Japanese, Polish, Russian, Spanish, Turkish•Regulatory approvals: CE, FCC, Class B, UL/cUL, CB, GOST, EPEAT•Warranty: 3-year warranty。
Philips 49BDL4031D 49英寸Edge-lit LED全高清显示屏说明书
Philips Signage SolutionsD-Line Display49"Edge-lit LED Full HD 450cd/m²49BDL4031DInform. Effortlessly.Smart, powerful 24/7 display.Make it clear with a powerful Philips D-Line Professional Full HD Display. This responsive solution offers brilliant picture quality, simple control, and reliable connectivity.Brilliant picture. Blazing processor speed.•Full HD. Clear images. Crisp contrast•IPS panel: rich color consistency from every angle•Place in landscape or portrait orientationEffortless setup. Total control.•Operate, monitor and maintain with CMND & ControlCost-effective system solution•Energy-saving automatic backlight control•FailOver ensures content is always playingHighlights CMND & ControlRun your display network over a local (LAN) connection. CMND & Control allows you to perform vital functions like controlling inputs and monitoring display status. Whether you're in charge of one screen or 100.FailOverFrom waiting room to meeting room, nevershow a blank screen. FailOver lets your PhilipsProfessional Display switch automaticallybetween primary and secondary inputs ensuringcontent keeps playing even if the primary sourcegoes down. Simply set a list of alternate inputs tobe sure your business is always on.SpecificationsPicture/Display•Diagonal screen size: 48.5 inch / 123.2 cm •Panel resolution: 1920x1080p•Optimum resolution: 1920 x 1080 @ 60Hz •Brightness: 450 cd/m²•Contrast ratio (typical): 1100:1•Dynamic contrast ratio: 500,000:1•Aspect ratio: 16:9•Response time (typical): 12 ms•Pixel pitch: 0.55926 x 0.55926 mm•Display colors: 16.7 Million•Viewing angle (H / V): 178 / 178 degree •Picture enhancement: 3/2 - 2/2 motion pull down, 3D Combfilter, Motion compens. deinterlacing, 3D MA deinterlacing, Progressive scan•Panel technology: IPS•Placement: Landscape (24/7), Portrait (24/7) Connectivity•Video input: Display Port1.2 (x1), DVI-I (x 1), HDMI (x2)•Video output: DisplayPort 1.2 (x1), DVI-I (x1)•Audio input: 3.5 mm jack•Audio output: 3.5mm jack•External control: RJ45, RS232C (in/out) 2.5 mm jack, IR (in/out) 3.5 mm jackSupported Display Resolution •Computer formatsResolution Refresh rate1920 x 1200 60Hz1920 x 1080 60Hz1600 x 1200 60Hz1440 x 900 60Hz1366 x 768 60Hz1360 x 768 60Hz1280 x 800 60Hz1280 x 768 60Hz1024 x 768 60Hz800 x 600 56, 60, 72, 75Hz640 x 480 60, 67, 72, 75Hz•Video formatsResolution Refresh rate1080p 50, 60Hz1080i 50, 60Hz720p 50, 60Hz576i 50Hz576p 50Hz480p 60Hz480i 60HzDimensions•Set dimensions in inch (W x H x D):43.21 x 24.96 x 1.79 inch•Set dimensions (W x H x D):1097.6 x 633.9 x 45.5 mm•Bezel width: 9.6 mm (T/L/R), 15.7 mm (B)•Product weight (lb): 32.63 lb•Product weight: 14.8 kg•Wall Mount: 400 x 400 mm, M6Convenience•Tiled Matrix: Up to 15 x 15•Keyboard control: Hidden, Lockable•Signal loop through: IR Loopthrough, DVI,DisplayPort•Network controllable: RJ45, RS232•Screen saving functions: Pixel Shift•Picture in picture: PIPPower•Consumption (On mode): 130W( max)•Standby power consumption: <0.5 W•Mains power: AC (100 ~ 240 V) , 2.5A•Consumption (Typical): 75 W•Energy Label Class: GOperating conditions•Temperature range (operation): 0 ~ 40 °C•Temperature range (storage): -10 ~ 50 °C•Altitude: 0 ~ 3000 m•MTBF: 50,000 hour(s)•Humidity range (operation)[RH]: 10 ~ 90% (withoutcondensation)•Humidity range (storage) [RH]: 0 ~ 100% (withoutcondensation)Sound•Built-in speakers: 2 x 10 W RMSAccessories•Included accessories: Remote Control, Batteries forremote control, AC Power Cord, Quick start guide,RS232 cable•Included Accessories: Edge Alignment Kit (1 )-2pcs,Edge Alignment Kit (2)-1pcs, M3 screw (x1), RS232daisy-chain cable, SD card cover (x1), Thumb Screw(x8)•Stand: BM05922 (Universal Stand-L)(Option)Miscellaneous•On-Screen Display Languages: English, French,German, Spanish, Polish, Turkish, Russian, Italian,Simplified Chinese, Traditional Chinese, Japanese,Arabic•Regulatory approvals: CE, CB, EAC, FCC, Class A,PSB, UL/cUL, EMF, EnergyStar 8.0•Warranty: 3 year warrantyIssue date 2022-11-04 Version: 7.0.112 NC: 8670 001 57451 EAN: 87 12581 75595 9© 2022 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Many computer resolutions are multiples of older resolutions
WUXGA
WUXGA stands for Widescreen Ultra eXtended Graphics Array and is a display resolution of 1920 x 1200 pixels with a 16:10 screen aspect ratio.
This resolution is currently available in high-end LCD televisions and computer monitors. Dell sells a notebook with a 15" LCD screen that has this resolution. Apple sells a 23" Cinema Display that has this resolution.
UXGA
Ultra eXtended Graphics Array is an abbreviation referring to a standard monitor resolution of 1600 x 1200 pixels. Dell Computer refers to the same resolution of 1,920,000 pixels as UGA.
SXGA
Super eXtended Graphics Array is an abbreviation referring to a standard monitor resolution of 1280 x 1024 pixels. This resolution of 1,310,720 pixels is an enhancement of the standard XGA resolution that IBM developed in 1990.
This resolution is a very strange resolution as it is not the standard 4:3 ratio but a 5:4 ratio. A standard 4:3 monitor using this resolution will therefore not have square pixels, but rectangular ones. This is especially a problem with LCD monitors which have a fixed resolution.
A resolution of 1280 x 960 is also often supported, which has the standard 4:3 ratio.
XGA
eXtended Graphics Array is an IBM display standard introduced in 1990. XGA supports a resolution of 1024 x 768 pixels with a palette of 256 colours, or 640 x 480 with high colour (16 bits per pixel). XGA-2 added 1024 x 768 support for high colour and higher refresh rates, improved performance, and supports 1360 x 1024 in 16 colours.。