超级吊的4141战术包[支持14.30｜不吊不要钱]使用说明

合集下载

高手必备和平精英高手道具使用攻略

高手必备和平精英高手道具使用攻略和平精英作为一款具有广泛影响力的大逃杀游戏，吸引了无数玩家的关注和参与。

在游戏中，道具的选择和使用对于提高生存能力和击败对手至关重要。

然而，作为一名高手，仅仅拥有好的道具是不够的，更重要的是如何合理、精准地运用这些道具。

在本篇文章中，我们将为大家介绍一些高手必备的和平精英道具使用攻略。

一、头盔和背心的选择与使用头盔和背心是玩家在游戏中保护自己的重要装备。

正确选择并合理使用头盔和背心，可以大大提升生存能力。

在游戏初期，推荐选择一级头盔和一级背心。

一级头盔可以有效减少来自敌方的爆头伤害，一级背心则可以提供额外的护甲值。

当玩家拥有足够资源时，可升级为二级头盔和二级背心，以增加更好的防护效果。

在很多情况下，面对强大的敌人，即使拥有完整的三级头盔和背心也难以保命。

因此，在游戏中应随时监控装备的状况，并根据实际情况进行调整。

当头盔或背心耐久度过低时，应立即更换。

二、枪械和配件的搭配与运用在和平精英中，枪械是玩家最主要的杀伤工具。

而合理搭配配件并且熟练运用各种枪械，是成为高手的必备技能。

首先，选择一把适合自己的主武器至关重要。

对于新手玩家来说，推荐选择易上手且威力较大的步枪类武器，如AKM和M416。

对于高级玩家来说，则可以根据个人游戏风格和偏好选择更加特殊的枪械，如狙击步枪或冲锋枪。

其次，在搭配配件时，玩家需要根据枪械的类型和特点选择相应的配件。

例如，对于步枪类武器，玩家可以选择全息镜、消音器、垂直握把等配件来提升射击精准度和稳定性。

对于狙击步枪，则可选择8倍镜、枪托和消音器等配件。

最后，在游戏中运用各种枪械时，玩家需要注重射击节奏和射击姿势。

采用连射、点射、自动射击等不同的射击方式，可以根据实际情况选择最佳的射击策略。

此外，合理调整枪械的后坐力和射击姿势，可以提高射击精准度和稳定性。

三、手雷和烟雾弹的使用技巧手雷和烟雾弹是和平精英中常见的辅助道具，可以在战术上起到关键的作用。

战术扣的使用

战术扣的使用The tactical buckle, also known as the quick-release buckle, is a versatile and convenient fastening device widely used in military, police, and outdoor activities. It offers a secure and reliable connection while allowing for quick and easy adjustments. The buckle's design typically features a strong metal frame and a spring-loaded mechanism that locks into place securely but can be easily released with a simple pull or push.战术扣，又称快速释放扣，是一种广泛应用于军事、警察和户外活动中的多功能便捷固定装置。

它提供了安全可靠的连接，同时允许快速和简单的调整。

战术扣的设计通常包括坚固的金属框架和弹簧加载机制，可以牢固锁定在位，但只需轻轻一拉或一推即可轻松释放。

In military applications, the tactical buckle is often used on gear such as backpacks, MOLLE attachments, and helmet straps. Its quick-release functionality allows soldiers to quickly adjust or remove their equipment in emergency situations, enhancing their operational efficiency and safety. Similarly, in police work, the tactical buckle is a valuable tool for officers who need to quickly access their equipment or make adjustments on the field.在军事应用中，战术扣常用于背包、MOLLE附件和头盔带等装备上。

运动再剧烈也甩不掉的8款战术背包

运动再剧烈也甩不掉的8款战术背包本文来源：1Gear装备网（小小）战术背包虽然是一个不错的户外道具，但相比登山包来说，也小众许多。

作为军旅产品，战术背包的外观颜色大都以军绿色、迷彩为主，容量和承载量都很大，而且没有登山包的背负系统。

战术背包最大的特色是可以在包侧面、上方，外挂 or 放置很多东西，包外也有可利用空间。

结构上采用了外架结构，包的主体就是一个 H 型或者 U 型的金属架子，这也为能把东西挂在上面打了基础。

这也是能经常看到兵哥哥们把卷好的铺盖直接绑在包上的原因啦。

如今的战术背包远非仅限于军警人员执行任务所用，已成为旅游、探险、或野外工作爱好者的必备物品！下面是小编推荐的8款战术背包，筒子们若有购买强迫症，可以参考哈子!CONDOR 3 DAY ASSAULT PACK一包在手，出游无忧，3天攻击包提供内部收纳格和外部口袋来收纳你所有的装备。

3天攻击包一直受到众多军事人员的青睐，是军迷的首选。

内部宽敞，两侧口袋可搭配 2个3L 水袋；这款3天攻击包是执行任何任务所必需的背包，弯曲式肩带根据人体曲线特点而设计，并有带衬垫的背板，增加稳定性的胸前固定带和腰带，让您舒适地进行长途跋涉。

HAZARD 4 EVAC PLAN-B SLING PACK无论是士兵、飞机飞行员、悍马车主，还是摄影爱好者，出行时都会随身携带装备，危机4推出的该款组合式单肩背包，满足了各类人群的需求。

外形灵巧细长，不占用空间，方便储存携带。

周身的Molle系统可加挂各种小配件，肩垫符合人体工程学设计，长期背负不会感觉太累；可旋转至胸前背负，取拿物品更加快捷方便。

5.11 RUSH MOAB 10MOAB 10机动挎包是5.11家RUSH系列中畅销的战术装备，“MOAB 10”代表这款包具可携带能够执行10个小时任务的装备。

包具内侧空间比较大，且经过了详细划分，可将众多装备有序存放。

同时，MOAB 10既可以单独背负使用，也可与RUSH系列中其他战术包具组合使用，灵活性非常强。

伯朗特操作说明书

機械手臂系列
LNC-R6000 操作手冊
2012/03 版本：V01.00 ()
Leading Numerical Controller
东莞市伯朗特自动化科技有限公司
东莞市伯朗特自动化科技有限公司Biblioteka 1LNC-R6000
目录 1 2 3 LNC-R6000 塑胶机机械手控制系统简介...................................................... 1 画面编排说明............................................................................................... 3 原点 ............................................................................................................. 4
5
自动 ........................................................................................................... 10
5.1 核对 ................................................................................................................................................... 10 5.1.1 按键说明 ...................................................................................................................................11 5.1.2 自动运行中修改程式 .................................................................................................................11 5.2 5.3 5.4 5.5 IO 状态 .............................................................................................................................................. 12 堆迭设定 ............................................................................................................................................ 12 取样不良 ............................................................................................................................................ 12 周期监视 ............................................................................................................................................ 13 5.5.1 输送带设定............................................................................................................................... 14 5.5.2 加工机设定............................................................................................................................... 14

Protistor 大小14x51 DC保护缜绳商品说明书

They are extremely high interrupting rating fuses: 440VDC, with large band of ratings (current rating 2 to 50A).
TECHNICAL DATA OVERVIEW
Voltage DC
440 VDC
Visual indicator
Ø 14.3 ± 0.1
0.5
13.2
-1
+0.6
51
13.2
MERSEN reserves the right to change, update or correct, without notice, any information contained in this datasheet.

2
Pre-arcing time (s)
Protistor® size 14x51 gLB 440VDC
TIME CURRENT CHARACTERISTIC CURVES
10000 7000 5000 3000 2000
1000 700 500 300 200
100 70 50 30 20
Semiconductor Protection Fuses / DS-PFCY1451GLB-01-1117-EN

3
Protistor® size 14x51 gLB 440VDC
L/R time constant (ms)
0 100 200 300 400 500 600
among all • Distribution circuit fuses • With trip-indicator
STANDARDS

Osprey TALON TEMPEST系列 S21 户外运动背包使用说明书

TALON 44TALON 33TALON 22TALON 11TALON 6TALON 36TALON OWNER'S MANUALTALON ™| TEMPEST SERIESWelcome to Osprey. We pride ourselves on creating the most functional, durable and innovative carrying product for your adventures. Please refer to this owner’s manual for information on product features, use, maintenance, customer service and warranty.TEMPEST 40 TEMPEST 30 TEMPEST 20 TEMPEST 9 TEMPEST 6TEMPEST 34TEMPEST 24PRODUCT PROMISEOne of the most versatile technical pack series ever created, the Talon/Tempest is designed for dynamic body movement, whether you’re bagging peaks or bikepacking. A lightweight, ventilated and close-to-body fit moves with you on the most technical terrain due to a BioStretch harness, continuous-wrap hipbelt and an injection-molded, die-cut foam AirScape ® backpanel. The Talon/Tempest Series ranges from lumbar packs to ultralight backpacks with each style offering not only optimal stability, but sustainable recycled fabric and appropri-ate features—all in a lightweight package to support big and small adventures alike.MAIN bluesign ® approved recycled 100D x 210D wave check high-tenacity nylon, PFC-free DWR ACCENT bluesign ® approved recycled 420HD nylon packcloth,PFC-free DWRBOTTOM bluesign ® approved recycled 420HD nylon packcloth,PFC-free DWR+ Body fabrics contain bluesign ® approved nylon + Contains GRS-certified recycled materials + PFC-free DWRTALON 44MEN'SSPECS S/M L/XL Cubic Inches 2563 2685 Liters 42 44Pounds 2.95 3.34 Kilograms 1.34 1.51Inches 27 h x 12 w x 11 d 30 h x 13 w x 11 d Centimeters 69 h x 31 w x 27 d 75 h x 34 w x 29 d PACK FEATURES:+ Stow-on-the-Go trekking pole attachment+ Dual upper and lower side compression straps + Dual entry side stretch mesh pockets + External hydration sleeve+ Stretch mesh harness stash pocket + Two zippered fabric hipbelt pocketsTALON 36MEN'SSPECS S/M L/XL Cubic Inches 2075 2197 Liters 34 36Pounds 2.59 2.68 Kilograms 1.17 1.21Inches 25 h x 12 w x 11 d 26 h x 12 w x 11 d Centimeters 63 h x 31 w x 27 d 67 h x 31 w x 27 d LOAD RANGE: 15-25 lb | 7-11 kg ADD ON: Raincover M | 3L ReservoirLOAD RANGE 15-30 lb | 7-11 kgADD ONRaincover M | 3L ReservoirPACK FEATURES:+ Wide-mouth, bucket-style main compartment opening + Top panel external zippered slash pocket + Large stretch mesh front panel pocket + Dual ice tool loops with bungee tie-offs + Stow-on-the-Go trekking pole attachment+ Dual upper and lower side compression straps+ Stretch mesh side pockets+ External hydration reservoir sleeve + Stretch mesh harness stash pocket +Two zippered fabric hipbelt pocketsTALON 33MEN'SSPECS S/M L/XL Cubic Inches 1892 2014 Liters 31 33Pounds 2.21 2.34 Kilograms 1 1.06Inches 24 h x 11 w x 10 d 26 h x 11 w x 10 d Centimeters 61 h x 29 w x 26 d 66 h x 29 w x 26 d LOAD RANGE: 10-20 lb | 5-8 kg ADD ON: Raincover M | 3L ReservoirPACK FEATURES:+ Stow-on-the-Go trekking pole attachment+ Dual upper and lower side compression straps + Stretch mesh side pocketsTALON 26MEN'SSPECS S/M L/XL Cubic Inches 1465 1587 Liters 24 26Pounds 1.96 2.11 Kilograms 0.89 0.96Inches 21 h x 11 w x 10 d 22 h x 11 w x 10 d Centimeters 54 h x 29 w x 25 d 56 h x 29 w x 25 d TALON 22MEN'SSPECS S/M L/XL Cubic Inches 1220 1343 Liters 20 22Pounds 1.91 2.04 Kilograms 0.87 0.92Inches 19 h x 11 w x 9 d 21 h x 11 w x 9 d Centimeters 49 x 27 w x 23 d 54 h x 28 w x 23 d LOAD RANGE: 10-20 lb | 5-8 kg ADD ON: Raincover S | 3L ReservoirLOAD RANGE 10-20 lb | 5-8 kg ADD ON Raincover S | 3L ReservoirTALON 11MEN'SSPECS S/M L/XL Cubic Inches 549 671 Liters 9 11Pounds 1.79 1.94 Kilograms 0.81 0.88Inches 19 h x 11 w x 8 d 20 h x 11 w x 8 d Centimeters 48 h x 27 w x 21 d 52 h x 27 w x 21 d LOAD RANGE: 10-20 lb | 5-8 kg ADD ON: Raincover XS | 3L ReservoirPACK FEATURES:+ Wide-mouth, bucket-style main compartment opening + Top panel external zippered slash pocket + Large stretch mesh front panel pocket + Dual ice tool loops with bungee tie-offs + Stow-on-the-Go trekking pole attachment + Lower side compression straps+ Stretch mesh side pockets+ External hydration reservoir sleeve + Stretch mesh harness stash pocket +Two zippered fabric hipbelt pocketsPACK FEATURES:+ Stow-on-the-Go trekking pole attachment + Lower side compression straps + Stretch mesh side pockets+ External hydration reservoir sleeve + Stretch mesh harness stash pocket + Two zippered fabric hipbelt pocketsPACK FEATURES:+ Stow-on-the-Go trekking pole attachment + Lower side compression straps + Stretch mesh side pockets+ Two zippered fabric hipbelt pockets + Blinker light attachmentTALON 6MEN'SSPECS O/S L/XL Cubic Inches 366 1587 Liters 6 26Pounds 0.96 2.11 Kilograms 0.41 0.96Inches 8 h x 10 w x 6 d 22 h x 11 w x 10 d Centimeters 21 h x 25 w x 15 d 56 h x 29 w x 25 d LOAD RANGE 10-20 lb | 5-8 kg ADD ON Raincover S | 3L Reservoir PACK FEATURES:+ Two zippered fabric hipbelt pockets * (bottles not included)TALON JRSPECS O/S Cubic Inches 671 Liters 11 Pounds 1.20 Kilograms 0.54 Inches 15 h x 10 w x 7 d Centimeters 39 h x 25 w x 17 d ADD ON: Raincover XS | 1.5L ReservoirPACK FEATURES:+ Dual-zippered panel access to main compartment + Internal zippered mesh pocket with key clip + Stretch mesh front panel pocket + Side stretch mesh pockets+ Top panel zippered slash pocket + LidLock bike helmet attachment+ External hydration reservoir sleeve + Stretch mesh harness stash pocket + Dual mesh hipbelt pockets + Blinker light attachmentTEMPEST 40WOMEN'SSPECS WXS/S WM/L Cubic Inches 2319 2441 Liters 38 40Pounds 2.74 2.29 Kilograms 1.24 1.33Inches 26 h x 13 w x 10 d 28 h x 13 w x 10 d Centimeters 65 h x 34 w x 26 d 70 h x 34 w x 26 d PACK FEATURES:+ Stow-on-the-Go trekking pole attachment+ Dual upper and lower side compression straps + Dual entry side stretch mesh pockets + External hydration sleeve+ Stretch mesh harness stash pocket + Two zippered fabric hipbelt pocketsTEMPEST 34WOMEN'SSPECS WXS/S WM/L Cubic Inches 1953 2075 Liters 32 34Pounds 2.33 2.52 Kilograms 1.06 1.14Inches 21 h x 11 w x 9 d 23 h x 11 w x 9 d Centimeters 54 h x 29 w x 23 d 59 h x 29 w x 23 d LOAD RANGE: 15-25 lb | 7-11 kg ADD ON: Raincover M | 3L ReservoirLOAD RANGE 15-30 lb | 7-11 kgADD ONRaincover M | 3L ReservoirPACK FEATURES:+ Wide-mouth, bucket-style main compartment opening + Top panel external zippered slash pocket + Large stretch mesh front panel pocket + Dual ice tool loops with bungee tie-offs + Stow-on-the-Go trekking pole attachment+ Dual upper and lower side compression straps+ Stretch mesh side pockets+ External hydration reservoir sleeve + Stretch mesh harness stash pocket +Two zippered fabric hipbelt pocketsTEMPEST 30WOMEN'SSPECS WXS/S WM/L Cubic Inches 1709 1831 Liters 28 30Pounds 2.09 2.23 Kilograms 0.95 1.01Inches 23 h x 12 w x 10 d 24 h x 12 w x 10 d Centimeters 58 h x 30 w x 26 d 61 h x 30 w x 26 d LOAD RANGE: 10-20 lb | 5-8 kg ADD ON: Raincover M | 3L ReservoirPACK FEATURES:+ Stow-on-the-Go trekking pole attachment+ Dual upper and lower side compression straps + Stretch mesh side pocketsTEMPEST 24WOMEN'SSPECS WXS/S WM/L Cubic Inches 1343 1465Liters 22 24Pounds 1.81 1.95Kilograms 0.82 0.89Inches 19h x 10w x 9d 20h x 10w x 9d Centimeters 47h x 26w x 22d 52h x 26w x 22d TEMPEST 20WOMEN'SSPECS WXS/S WM/L Cubic Inches 1098 1220Liters 18 20Pounds 1.78 1.91Kilograms 0.81 0.87Inches 17h x 11w x 8d 19h x 11w x 8d Centimeters 44h x 27w x 20d 49h x 27w x 20d LOAD RANGE: 10-20 lb | 5-8 kg ADD ON: Raincover S | 3L ReservoirLOAD RANGE 10-20 lb | 5-8 kgADD ONRaincover S | 3L ReservoirTEMPEST 9WOMEN'SSPECS WXS/S WM/L Cubic Inches 427 549Liters 7 9Pounds 1.64 1.79Kilograms 0.75 0.81Inches 17h x 11w x 8d 19h x 11w x 8d Centimeters 43h x 27w x 20d 47h x 27w x 20d LOAD RANGE: 10-20 lb | 5-8 kg ADD ON: Raincover XS | 3L ReservoirPACK FEATURES:+ Wide-mouth, bucket-style main compartment opening + Top panel external zippered slash pocket + Large stretch mesh front panel pocket + Dual ice tool loops with bungee tie-offs + Stow-on-the-Go trekking pole attachment + Lower side compression straps+ Stretch mesh side pockets+ External hydration reservoir sleeve + Stretch mesh harness stash pocket +Two zippered fabric hipbelt pocketsPACK FEATURES:+ Stow-on-the-Go trekking pole attachment + Lower side compression straps + Stretch mesh side pockets+ External hydration reservoir sleeve + Stretch mesh harness stash pocket + Two zippered fabric hipbelt pocketsPACK FEATURES:+ Stow-on-the-Go trekking pole attachment + Lower side compression straps + Stretch mesh side pockets+ Ice tool loop with bungee tie-offs + External hydration reservoir sleeve + Stretch mesh harness stash pocket+ Two zippered fabric hipbelt pockets + Blinker light attachmentTEMPEST 6WOMEN'SSPECS O/S Cubic Inches 366 Liters 6 Pounds 0.96 Kilograms 0.41 Inches 8 h x 10 w x 6 d Centimeters 21 h x 25 w x 15 d PACK FEATURES:+Two zippered fabric hipbelt pockets * (bottles not included)TEMPEST JRSPECS O/S Cubic Inches 671 Liters 11 Pounds 1.20 Kilograms 0.54 Inches 15 h x 10 w x 7 d Centimeters 39 h x 25 w x 17 dADD ON: Raincover XS | 1.5L ReservoirPACK FEATURES:+ Dual-zippered panel access to main compartment + Internal zippered mesh pocket with key clip + Stretch mesh front panel pocket + Side stretch mesh pockets+ Top panel zippered slash pocket + LidLock bike helmet attachment+ External hydration reservoir sleeve + Stretch mesh harness stash pocket + Dual mesh hipbelt pockets + Blinker light attachmentSUSPENSION +LightWire peripheral frame (Talon/Tempest 44/40L only) effectively transfers load to hipbeltAIRSCAPE BACKPANEL*+Injection-molded AirScape ® framesheet with die-cut foam provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use+Mesh-covered foam lumbar for lightweight and comfortable contact surfacesBIOSTRETCH HARNESS*+Integrated BioStretch seams offer maximum flexibility withoutsacrificing stability for dynamic body movementHARNESSHIPBELTSTERNUM STRAPFRAME+ Spacermesh over die-cut foam provides breathable, comfortable contact surface+ Harness system easily adjusts to fit various torso lengths +Adjustable sternum strap with safety whistle buckleBIOSTRETCH HIPBELT +Seamless lumbar-to-hipbelt body wrap and BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement+Spacermesh over die-cut foam provides breathable, comfortable contact surface Crossbody ErgoPull hipbelt system to pull lumbar into bodyBACKPANEL*TALON/TEMPEST 6 EXCLUDEDCARRYSIZING / FITTALON - MEN'S SIZING S/M 16-20" / 41-51 cm M/L 19-23" / 48-58 cmTEMPEST - WOMEN'S SIZING WXS/S 13-17" / 33-43 cm WM/L 16-20" / 41-51 cmHARNESS FITThe harness straps should wrap fully around your shoulders with no gaps between the pack and your back. The padded part of the harness straps should end 1"/2.5 cm- 2"/5 cm below the armpits and the sternum strapadjusted to approximately 2"/5 cm below the collarbone.WOMEN'S SPECIFIC FIT +The unique suspended mesh located on the shoulders, backpanel, lumbar and hipbelt contour to a wide variety of body shapes and sizes to create a custom fit to your body.+The pack shape is narrower and deeper, allowing greater freedom ofmovement and increases stabilization by lowering the position of the load to a woman's center of gravity.+ The shoulder harness is designed with different curves to create an anatomical fit for a woman's neck, shoulders and chest.+Women's hips are conically shaped with a larger difference between the waist and hip measurements. The hipbelts are shaped and angled toaccommodate this difference, which allows a more comfortable load transfer and support.TALON / TEMPEST SERIES11FEATURE DETAILSEXTERNAL RESERVOIR SLEEVE 44L / 40L / 36L / 34L / 33L / 30L / 26L / 24L / 22L / 20L / 11L / 9L / JR External reservoir sleeve located behind the shoulder harness, allows for easy loading/unloading of a hydration reservoir. Place reservoir inside the sleeve to help provide proper weight distribution. Clip reservoir to buckledloop to keep upright.HARNESS ADJUSTMENT 44L / 40L / 36L / 34L / 33L / 30L / 26L / 24L / 22L / 20L / Loosen load lifter straps at the top Xof the harness, slide hand between backpanel and harness to release hook and loop attachment and slide harness into position using arrows to guide. Firmly press on backpanel to reengage hook and loop attachment.DUAL AND SINGLE ICE TOOL LOOPS 44L / 40L / 36L / 34L / 33L / 30L / 26L / 24L / 22L / 20L/ 11L / 9L Dual and single ice tool loops provide secure storage for mountaineering axes and ice tools.A S lide the tool shaft through the top of the ice tool loop and flip the shaft up toward the top of the pack.B L oose the bungee cord lock and route the too handle through the bungee. Tighten the cord lock nesting it into the Y-clip to secure the tool into place.C Reverse to remove.LIDLOCK™22L / 20L / 11L / 9L / JR To use LidLock™ helmet attachment, locate LidLock™ clip on top front panel of pack, pull clip away from pack, pass through helmet vent and secure in horizontal position. The cord located on the inside of the pack is used to increase or decrease tension as needed. Reverse to remove helmet.SIDE STRETCH MESH POCKETS 44L / 40L / 36L / 34L / 33L / 30L / 26L / 24L / 22L / 20L / 11L / 9L / JR Stretch mesh pockets on both sides of pack provide convenient storage for smaller items.LOWER INSIDEOUT COMPRESSION / CARRY STRAPS 44L / 40L / 36L / 34L / 33L / 30L / 26L / 24L / 22L / 20L / 11L / 9L InsideOut™ Compression straps compress pack when not full to ensure stable carry and secure items in side pockets. They can be routed inside or outside of the side mesh pockets:A L ocate duckbill buckle at the top and side of each side pocket and unthread the webbing. B R oute the webbing by positioning the slider buckle inside or outside of the side pocket andreverse the process.STOW-ON-THE-GO TREKKING POLE ATTACHMENT 44L / 40L / 33L / 30L / 22L / 20L / 11L / 9L Osprey's Stow-on the-Go™ trekking pole attachment is designed to quickly attach and carry trekking poles while wearing a pack.A L ocate the elasticized loop on the lower left side of pack. While pulling the loop out from the pack, insert the basket end of the trekking poles into the loop. B O n the left harness strap locate the trekking pole icon. Pull up on the cord to open, place pole handles in the loop and tighten with the cord lock to secure. CReverse these steps to remove the trekking poles.For more information on this product and others, pack care, how to pack your pack, our lifetime guarantee, or to contact Osprey Customer Service, visit . OWNER'S MANUAL。

AZM 415-11 11ZPK 110VAC 调节式铁球锁说明书

DATASHEETDataOrdering dataProduct type description AZM 415-11/11ZPK 110VAC Article number (order number)101167202EAN (European Article Number)4030661218168eCl@ss number, version 12.027-27-26-03eCl@ss number, version 11.027-27-26-03eCl@ss number, version 9.027-27-26-03ETIM number, version 7.0EC002593ETIM number, version 6.0EC002593Approvals - StandardsCertificates BGcULusCCCGeneral dataStandards BG-GS-ET-19EN IEC 60947-5-1 Working principle electromechanical Enclosure material Aluminium Enclosure coating material paintedGross weight905 gGeneral data - FeaturesPower to unlock YesNumber of actuating directions1Number of auxiliary contacts2Number of safety contacts2Number of guard doors1Safety classificationStandards EN ISO 13849-1 Mission time20 Year(s)Safety classification - Safety outputsNormally-closed contact (NC)2,000,000 Operations B10DMechanical dataMechanical life, minimum1,000,000 Operations in accordance with EN ISO 141193,500 NHolding force FZhLatching force, minimum150 NLatching force, maximum400 NPositive break travel 5 mmPositive break force, minimum15 NActuating speed, maximum0.2 m/sMechanical data - Connection techniqueTermination Screw terminals M20 x 1.5Cable section, minimum 2 x 0.75 mm²Cable section, maximum 2 x 2.5 mm²Note (Cable section)All indications including the conductor ferrules.Mechanical data - DimensionsLength of sensor46.5 mmWidth of sensor130 mmHeight of sensor100 mmAmbient conditionsDegree of protection IP67Ambient temperature-25 ... +50 °CAmbient conditions - Insulation values250 VACRated insulation voltage Ui4 kVRated impulse withstand voltage UimpElectrical dataThermal test current 6 ARated control voltage110 VACUtilisation category AC-15230 VACUtilisation category AC-15 4 AUtilisation category DC-1324 VDCUtilisation category DC-13 1 AElectrical power consumption, maximum10 WSwitching element NO contact, NC contact Switching principle Slow actionMaterial of the contacts, electrical SilverOther dataNote (applications)sliding safety guardhinged safety guardOrdering codeProduct type description:AZM 415-(1)(2)PK(3)-(4)(5)(6)-(7)(1)11/11 2 NC contacts/2 NO contacts 11/02 3 NC contacts / 1 NO contacts 11/20 1 NC contacts / 3 NO contacts 02/11 3 NC contacts / 1 NO contacts 02/20 2 NC contacts / 2 NO contacts 02/02 4 NC contact(2)X Protection class IP54Z Protection class IP67(3)without Power to unlockA Power to lock(4)STR Connector M23 rightST Connector M23 bottom(5)without Without manual releaseE Manual release using triangular keyF with triangular key (secured with locking screw)FE using triangular keyRS Manual release using keyT Emergency exit using latched pushbutton (power tounlock only)TE Emergency exit using latched pushbutton and manualrelease, mounting outside (power to unlock only)TEI Emergency exit using latched pushbutton and manualrelease, mounting inside (power to unlock only)NS Emergency release using lock button(6)24VAC/DC Us: 24 VAC/DC110VAC Us: 110 VAC230VAC Us: 230 VAC(7)1637Gold-plated contacts(1)A Power to lock(2)ST Connector M23 rightwithout Power to unlockSTR Connector M23 bottom(3)without Without manual releaseE Manual release using triangular key (only for power tounlock principle)(4)1637Gold-plated contactsPicturesProduct picture (catalogue individual photo)ID: kazm4f24| 679.3 kB | .jpg | 352.778 x 277.636 mm - 1000 x 787 px - 72 dpi| 42.3 kB | .png | 74.083 x 58.208 mm - 210 x 165 px - 72 dpiDimensional drawing basic componentID: 1azm4g01| 35.2 kB | .cdr || 9.5 kB | .png | 74.083 x 51.506 mm - 210 x 146 px - 72 dpi| 132.1 kB | .jpg | 352.778 x 245.181 mm - 1000 x 695 px - 72 dpiDiagramID: kazm4k25| 59.7 kB | .ai | 297 x 210.002 mm - 841 x 595 px - 72 dpi| 80.4 kB | .jpg | 352.778 x 188.031 mm - 1000 x 533 px - 72 dpi| 3.6 kB | .png | 74.083 x 39.511 mm - 210 x 112 px - 72 dpiK.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 WuppertalThe details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.Generated on: 21/07/2023, 06:28。

凸轮及同步控制指导说明

目录凸轮及同步控制指导说明 (3)1 凸轮简介 (3)1.1 凸轮基本原理 (3)1.2 了解机械参数 (4)2 三种基本模式 (6)2.1 旋切/飞剪 (6)2.1.1 试运行 (9)2.1.2 显示 (14)2.1.3 配置功能 (15)2.2 追剪 (31)2.2.1 试运行 (32)2.2.2 显示 (37)2.2.3 配置功能 (38)2.3 通用凸轮 (50)2.3.1 界面介绍 (50)2.3.2 试运行 (53)2.3.3 配置功能 (55)3 故障处理 (58)4 常见问题 (59)5 功能码 (60)龙门同步控制说明 (69)1 基本原理 (69)2 系统配线图 (69)3 参数的设定 (71)4 对位回零方式 (73)5 后台监控通道 (75)6 步骤 (75)凸轮及同步控制指导说明1凸轮简介本说明书介绍了如何正确使用汇川电子凸轮专用伺服驱动器。

在使用（安装、运行、维护、检查等）前，请务必认真阅读本说明书。

另外，请在理解产品的特性后再使用该产品。

本产品的主要特点有：（1）伺服驱动器与运动控制器结合为一体化控制器。

（2）使用高精度电子凸轮生成运动轨迹，速度、加速度曲线都平滑变化，使电机的速度指令、转矩指令没有阶跃变化，可以大幅度减小机械缓冲。

（3）支持自由曲线规划、同步旋切、自动追剪、等电子凸轮功能。

（4）可跟踪标点位置（色标、孔位及凸点等）实时调节进行剪切。

可用于印刷纸、包装袋等需要补偿印刷/位置偏差的剪切。

（5）支持相位调整功能。

可用于医用卫生纸等没有色标但需要补偿位置偏差的剪切。

（6）支持Modbus、与PLC，HMI等通讯，实时修改凸轮数据、方便灵活使用。

（7）剪切长度范围可达到65535.000mm，设定可精确至um单位。

（8）可包含人性化的订单自动切换功能。

（9）自由曲线规划功能，大容量EEPROM可使设置的点数多达272个。

（10）人性化的图形规划界面、自由上传、下载的功能使用户在使用时更加形象、具体、方便。

first tactical和511 -回复

在当今社会，户外活动越来越受到人们的喜爱，而对于户外活动爱好者来说，选择一款高品质的Tactical装备是非常重要的。

在各种品牌中，First Tactical和511作为两个知名的户外品牌备受关注。

那么，它们各自的特点和优势是什么呢？接下来让我们来进行一番评论和比较。

一、产品种类和规格First Tactical和511作为专业户外品牌，都有着丰富的产品线。

First Tactical主要的产品包括服装、背包、户外配件等，其产品种类齐全，能够满足户外爱好者的各种需求。

而511则以军事制服和战术装备为主打产品，其产品在规格和功能上更为专业和精细。

二、材质和工艺在材质和工艺方面，First Tactical和511都以高品质的材料和精湛的工艺著称。

First Tactical采用高科技合成材料制作其产品，具有轻便、耐磨、防水等特点。

而511则注重细节和耐用性，采用耐磨、防水、抗撕裂的特殊材料，以确保产品在恶劣环境下的可靠性。

三、设计和人体工程学设计和人体工程学是决定一款户外装备是否实用和舒适的关键因素。

First Tactical的产品设计简洁大方，注重人体工程学，确保产品佩戴舒适，操作便捷。

511则在设计上更注重功能性和实用性，产品线条简洁利落，能够满足各种复杂环境下的使用需求。

四、品牌口碑和用户评价品牌口碑和用户评价是衡量一个品牌产品质量的重要指标。

在这一点上，First Tactical和511都拥有众多的忠实用户和良好的口碑。

First Tactical以其精湛的工艺和舒适的佩戴体验深受用户喜爱，而511则以其专业的军事品质和稳定的性能获得了广泛好评。

五、市场定位和价格市场定位和价格是用户们选择产品时的重要考量因素。

First Tactical 和511在市场上都有着一定的知名度和美誉度，因此其产品价格相对较高。

但考虑到其高品质和专业性能，这样的价格是值得的。

First Tactical和511作为两个专业的户外品牌，在产品质量、用户口碑、市场定位等方面都有着不俗的表现。

安防综合管理平台配置指南(BS)

2.4 视频应用.................................................................................................................... 2-109
2.4.1 视频管理................................................................................................................................2-109
bs目录1111系统简介1112界面结构2121场景需求2122基础应用21221系统参数21222数据库管理24223资源管理25224用户管理214225报警管理217226地图管理223227日志检索226228网络管理22623一卡通应用227231一卡通管理227232门禁管理236233考勤管理260234巡查管理273235梯控管理284236访客管理294237消费管理29824视频应用2109241视频管理3131电视墙接入3132报警主机接入3333多网域平台3534流媒体级联3735ehome设备接入3936手机短信开门41441ak系列高级参数解说4141111系统简介安防综合管理系统采用cs混合体系结构提供系统管理安全认证维护机制信息分类等功能
2.2.1 系统参数....................................................................................................................................2-1 2.2.2 数据库管理 ................................................................................................................................2-4 2.2.3 资源管理....................................................................................................................................2-5 2.2.4 用户管理..................................................................................................................................2-14 2.2.5 报警管理..................................................................................................................................2-17 2.2.6 地图管理..................................................................................................................................2-23 2.2.7 日志检索..................................................................................................................................2-26 2.2.8 网络管理..................................................................................................................................2-26

萨奥丹佛斯柱塞泵手册

1998年发布型号
概述. ....................................................................................................................................................................................... 9 更改说明............................................................................................................................................................................... 9 壳体. ................................................................................................................................................................................. 9 补油泵. ............................................................................................................................................................................ 9 辅助安装法兰盖板. .................................................................................................................................................... 9 补油溢流阀.................................................................................................................................................................... 9 阀芯－回路冲洗.......................................................................................................................................................... 9

WGI-1010输液泵说明书

警告

本产品应由专业临床医生，或在专业临床医生的指导下使用。使用本产品的人员应接受专业的培训。任何没有授权或没有经过培训的人员不得进行任何操作。
IV
前
说明
言
本使用说明书（以下简称“说明书” ）详细地介绍了产品的用途、功能和使用操作。使用本产品前，请认真阅读并理解本说明书，保证能够正确地使用本产品，确保患者和操作者的安全。本说明书按照最完整的配置对本产品进行介绍，部分内容可能不适用于您所购买的产品。如果有任何疑问，请与本公司联系。请将本说明书放置在输液泵附近，以便随时查阅。
本使用说明书发行版本：V3.0 本使用说明书发行日期：2012-4
I
知识产权
本使用说明书及其对应产品的知识产权属于山东威高集团医用高分子制品股份有限公司（以下简称“威高公司” ）。 © 2012 山东威高集团医用高分子制品股份有限公司，著作权所有。未经威高公司书面同意，任何个人或组织不得复制、修改或翻译本使用说明书的任何部分。
产品性能、结构及组成：由主机、内部充电电池等组成产品适用范围：供医院对患者进行恒速静脉输注液体或药物时准确连续输注用山东威高集团医用高分子制品股份有限公司山东省威海市世昌大道 312 号山东省威海市世昌大道 312 号
生产企业名称：注册地址：生产地址：公司网址：
保修期满后，威高公司可以继续提供收费维修服务。您如果拒绝支付或迟延支付维修服务费用，威高公司将暂时中止维修服务直至您支付为止。
III
售后服务单位
山东威高集团医用高分子制品股份有限公司山东省威海市世昌大道 312 号邮政编码：264210 服务热线：4006189177 投诉电话：0631-5660721 传真： 0631-5716235

亚洲飞行器412CF主旋盾扩展钳子杆螺纹件号412-010-137-103机器人影响说明书

ALERT SERVICE BULLETIN 412-09-3923 November 2009Revision A, 16 July 2018 MODEL AFFECTED: 412CFSUBJECT: MAIN ROTOR BLADE EXPANDABLE BOLT P/N412-010-137-103HELICOPTERS AFFECTED: Model 412CF helicopters serial number 46400through 46499.COMPLIANCE:Part A: If not previously accomplished at the originalrelease of this bulletin, within 100 flight hours or 90days whichever occurs first after the release of thisbulletin revision A.Part B: If a detailed inspection has not beenaccomplished within the last 300 flight hours / 6months, within 100 flight hours or 90 days whicheveroccurs first after the release of this bulletin revision Aand, every 300 flight hours or 6 months thereafter,whichever occurs first.Part C: Within 25 flight hours after accomplishment ofPart A and/or B and every time the expandable bolt isremoved and installed. Refer to accomplishmentInstructions in the Bulletin for additional information. DESCRIPTION:Bell Helicopter has recently investigated an in-flight fracture of the Expandable Blade Bolt P/N 412-010-137-103. Investigation has revealed that the fracture originated from fretting damage of the Expandable Bolt core pin. Low handle tension, improper handling, unapproved disassembly and reassembly of the expandable bolt were contributing factors resulting in fretting damage of the core pin and broken ring segments.The loss of dry film lube from the fretting damage consequently results in corrosion of the expandable ring segments and the core pin.This three-part bulletin revision addresses a discrepancy with the inspection interval in the Maintenance Manual and introduces changes to Special Inspections 5-15A and 5-22A. When the intent of the original release of this bulletin was incorporated into Chapter 5 of the Maintenance Manual, the expandable bolt detailed inspection schedule was changed from 300 flight hours / 6 months to 600 hours / 12 months.Based on recent data, the inspection interval of the maintenance manual will be changed to align with the requirements of revision A of this bulletin (Every 300 flight hours or 6 months).Part A of this bulletin mandates a one-time inspection of the spacer. Only the one-piece spacer is approved for use on the subject expandable bolt.Part B of this bulletin mandates a detailed inspection of the expandable bolt.Part C of this bulletin changes the requirement for bolt handle force check from 25 hours after bolt installation to within 25 flight hours after bolt installation.Applicability of this bulletin to any spare part shall be determined prior to its installation on an affected helicopter.APPROVAL:The engineering design aspects of this bulletin are FAA approved for FAA certified helicopters as listed in the applicable Type Certificate Data Sheet. For non FAA certified helicopters, the engineering design aspects of this bulletin are Bell Helicopter Engineering approved.CONTACT INFO:For any questions regarding this bulletin, please contact:Bell Helicopter Product Support Engineering - Medium HelicoptersTel:450-437-6201/1-800-363-8028/************************ MANPOWER:PART A: Approximately 1.0 hourPART B: Approximately 4.0 man-hours are required to complete this bulletin. This estimate is based on hands-on time and may vary with personnel and facilities available. PART C: Approximately 1.0 hourWARRANTY:There is no warranty credit applicable for parts or labor associated with this bulletin. MATERIAL:Required Material:The following material is required for the accomplishment of this bulletin and may be obtained through your Bell Helicopter Textron Supply Center.Part Number Nomenclature Qty (Note)412-010-137-103 Bolt Assembly, Expandable (If Required) Consumable Material:The following material is required to accomplish this bulletin, but may not require ordering, depending on the operator’s consumable material stock levels. This material may be obtained through your Bell Helicopter Textron Supply Center.Part Number Nomenclature Qty (Note) Reference *THIXOGREASE TT-N-95, TY IITT-1735 Isopropyl TIO-LUBE 70 Grease, High PressureAliphatic NaphthaAlcoholDry Film LubricantAs RequiredAs RequiredAs RequiredAs RequiredC-561C-305C-385C-021* C-XXX numbers refer to the consumables list in the BHT-ALL-SPM, Standard Practices Manual SPECIAL TOOLS:Expandable Blade Bolt Segment Removal/Installation Work AidOperators may, at their discretion manufacture an Expandable Blade Bolt Segment Removal/Installation work aid as shown in Figure 4 of this bulletin.Tool Length: 12.0 inches (304.8 mm)Tool Diameter: 0.625 inch (6.35 mm)Thread Size: .4375-20 UNJF-3B. Thread per MIL-S-88791 inch (25.4 mm) min. full thread depthWEIGHT AND BALANCE:Not Affected.ELECTRICAL LOAD DATA:Not affected.REFERENCES:C-12-146-000/MY-001 Illustrated Parts BreakdownC-12-146-000/MM-001 Maintenance ManualC-12-146-000/MP-001 Component Repair and Overhaul ManualC-12-146-000/MS-002 Standard Practices ManualPUBLICATIONS AFFECTED:C-12-146-000/MF-001 Maintenance ManualACCOMPLISHMENT INSTRUCTIONS:PART A. Spacer inspection.1. Gain access to the Expandable Blade Bolt (1) and remove from the M/R Hub.(Figure 1).2. A one-time inspection of the spacer (Figure 2) in the center of the expandable ring segments. The two-piece spacer configuration is unapproved; therefore, the discrepant bolt must be removed from service and returned through the (CPR) Process (Information Letter GEN-04-98).PART B. Expandable bolt detailed inspection.1. Gain access to the Expandable Bolt (1) and remove from M/R Hub.2. Clean the expandable bolt with a cloth dampened with aliphatic naphtha (C-305) orisopropyl alcohol (C-385) and wipe dry with a clean rag.3. Prior to disassembly of the bolt, ensure the nut (4) is facing up (Figure 1).4. With the expandable blade bolt handle (2) in the open (as removed) position, removenut (4) from the core pin (6).5. Attach the expandable blade bolt segment removal/installation tool work aid (5) tothe threaded end of the core pin (6) until firmly seated (finger-tight only).6. Hold or secure the handle (2) and, while holding the segments (3), invert expandablebolt assembly to allow the segments (3) to slide freely from the core pin (6) to the bolt segment removal/installation work aid (5).7. Using naphtha (C-305) or alcohol (C-385), clean the segments (3) and the core pin(6) without removing them from the bolt segment removal/installation work aid (5).Separate the segments (3) to remove all dirt and debris.8. Thoroughly dry the segments (3) and the core pin (6) with clean compressed air.Visually inspect the segments (3) and the expandable blade bolt (1) for cracks, fretting, corrosion, or mechanical damage (Figure 3).Repairable damage of the expandable blade bolt is limited toblending / polishing with an abrasive cloth or paper 240 gritfollowed by 320 and 400 grit abrasive cloth or paper (C-423).Apply dry film lube (C-021) to repaired areas and areas ofburnished or missing dry film lube.Any core pin (6) missing dry film lube from more than 50% ofits surface area is not repairable.Any bolts with damage beyond the limits of Figure 3 must beremoved from service.9. Apply a thin continuous layer of Thixogrease (C-561) to the core pin (6) and thesegments (3) both internally and externally on all surfaces.10. To begin reassembly, hold the end of the bolt segment removal/installation work aid(5) and handle (2). Invert the expandable bolt assembly to allow segments (3) toslide freely from the bolt segment installation/removal work aid (5) back onto the core pin (6). Ensure the segments seat correctly against each other.11. Remove the expandable bolt segment removal/installation work aid (5) and installnut (4) on the core pin (6).12. Install and adjust expandable blade bolt as per C-12-146-000/MM-001, Chapter 62.13. Annotate records to indicate that the intent of Part B of this bulletin has been carriedout.PART C. Expandable bolt handle force check.1. Verify expandable blade bolt handle (2) force at initial installation and again within 25flight hours after installation as follows:A. Remove safety lock pin from lower end of expandable bolt (1).B. Raise bolt handle (2) to reduce the diameter of the bolt ring segments.C. Push down on bolt handle (2). Verify that force required to push handle down isbetween 50 and 75 pounds (222 to 334 N). If the handle tension is between the allowable 50 – 75 pounds, no further action required until the next expandable bolt removal.If adjustment is required, carry out an additional handle forcecheck within 25 flight hours. Notify Bell Helicopter ProductSupport immediately if the handle force of an individual bolt isout of allowable limits between 50 and 75 pounds (222 to 334N) in two consecutive inspections.D. Annotate records to indicate the intent of Part C of this bulletin has been carried out.Figure 1 – Main Rotor Blade Bolt AssemblyFigure 2 - Expandable Bolt Spacer ConfigurationFigure 3 - Main Expandable Blade Bolt – Damage LimitsFigure 4 - Expandable Blade Segment - Removal / Installation Work Aid。

2015-2018 Mustang半钢杆升级套件M-4130-MA商品说明书

NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSKit contains:1 - M-4138-MA half shaft RH1 - M-4139-MA half shaft LHNOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.NOTICE: Any fasteners with damage or corrosion must be replacedINSTALLATION INSTRUCTIONS:NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSSTEP 1: Raise and support vehicle to gain access to underside.STEP 2: Remove the wheel nuts from both rear wheels.STEP 3: Remove and discard the spindle nut.NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSSTEP 4: Using Special Service Tool: 205-D070 (D93P-1175-B) or equivalent, Press the halfshaft breaking the splines free from the hub.NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSSTEP 5: Remove the 2 bolts and position the brake caliper and anchor plate assembly aside. Clean and remove any thread locking compound from the bolts.NOTE: Do not allow the brake caliper and anchor plate assembly to hang from the brakehose or damage to the hose may occur.STEP 6: Remove the brake disc.NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSSTEP 7: Remove the wheel speed sensor bolt (1) and position aside the wheel speed sensor.Remove the parking brake cable bracket bolt (2) and position the parking brake cable bracket aside.STEP 8: Support the suspension at curb height. Use General Equipment: Vehicle/Axle StandsNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSSTEP 9: Remove the 2 lower arm vertical link bolts and remove the lower arm vertical link. Clean and remove any thread locking compound from the bolts.STEP 10: Remove the wheel knuckle-to-upper arm bolt and nut (1).Remove the wheel knuckle-to-toe link bolt and nut (2). Remove the wheel knuckle-to-lower arm bolt (3). Remove the knuckle / hubNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSassembly. A light tap from a dead blow hammer may be required to assist the halfshaft removal from the hub. Clean and remove any thread locking compound from the boltsNOTE: Support the halfshaft when removing the knuckle / hub assembly.NOTE: Hub is removed from the image for clarity.Rear Halfshaft Notes:NOTICE: Never pick up or hold the halfshaft by only the inner or outer Constant Velocity (CV) joint. Damage to the CV joint will occur.NOTICE: Never use a hammer to remove or install the halfshafts. Damage to the CV joint may occur. NOTICE: Never use the halfshaft assembly as a lever to position other components. Damage to the halfshaft or CV joint may occur.NOTICE: Do not allow the boots to contact sharp edges or hot exhaust components. Damage to the halfshaft boots will occur.NOTICE: Do not drop assembled halfshafts. The impact may cut the boots from the inside without evidence of external damagNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSSTEP 11: Be sure to clean area around halfshaft of any dirt and debris prior to removal of the halfshaft to prevent any debris from contaminating parts. Then, using a pry bar, remove the halfshaft. Inspect the old inner spline for the retainer clips. (If not on spline, locate within differential)STEP 12: Inspect the new halfshafts and verify the halfshaft retainer clips are in place.STEP 13: Install the halfshaft until the halfshaft circlip is fully seated.NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSNOTE: After insertion, pull the halfshaft inner end to make sure the circlip is locked.When seated correctly, the halfshaft retainer circlip can be felt as it snaps into the differential side gear groove.NOTICE: Tighten the following suspension bushing fasteners with the suspension loaded or with the weight of the vehicle resting on the wheels and tires, otherwise incorrect clamp load and bushing damage may occur.STEP 14: Place a small amount of anti-seize onto the outer halfshaft splines. Position the wheel knuckle / hub assembly, guide the halfshaft into the hub and install the wheel knuckle-to-lower arm bolt (1) withNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSBLUE thread locking compound. Torque to: 203 lb.ft (275 Nm). Install the wheel knuckle-to-toe link bolt and nut (2) with BLUE thread locking compound. Torque to: 129 lb.ft (175 Nm). Install the wheel knuckle-to-upper arm bolt and nut (3) with BLUE thread locking compound. Torque to: 76 lb.ft (103 Nm).NOTE: Hub is removed from the image for clarity.STEP 15: Position the parking brake cable bracket and install the parking brake cable bracket bolt with BLUE thread locking compound. Torque to: 21 lb.ft (28 Nm). Position the wheel speed sensor and install the wheel speed sensor bolt with BLUE thread locking compound. Torque to : 80 lb.in (9 Nm)NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSSTEP 16: Position the lower arm vertical link and install the 2 lower arm vertical link bolts with BLUE thread locking compound. Tighten the lower arm vertical link upper bolt. Torque to: 76 lb.ft (103 Nm) Tighten the lower arm vertical link lower bolt. Torque to: 129 lb.ft (175 Nm)STEP 17: Install the rear rotors onto the rear hubs.NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSSTEP 18: Install the brake caliper and anchor plate assembly using 2 bolts with BLUE thread locking compound. Torque to: 129 lb.ft (175 Nm)NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSSTEP 19: Install the new spindle nuts with Blue thread locking compound. Torque Stage 1: 98 lb.ft (133 Nm). Torque Stage 2: 45°STEP 20: Remove the differential fluid fill plug.NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSSTEP 21: Check and top off the differential with clean differential gear lubricant. The differential gear lubricant level should be within 9mm (0.354 in.) from the fluid level fill plug opening. Recommended fluid: Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant / XY-75W85-QLSTEP 22: Install the differential fluid fill plug. Torque to: 25 lb.ft (34 Nm)NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSWARNING: When a wheel is installed, always remove any corrosion, dirt or foreign material present on the mounting surface of the wheel and the mounting surface of the wheel hub, brake drum or brake disc. Make sure that any fasteners that attach the rotor to the hub are secured so they do not interfere with the mounting surfaces of the wheel. Failure to follow these instructions when installing wheels may result in the wheel nuts loosening and the wheel coming off while the vehicle is in motion, which could result in loss of control,leading to serious injury or death to vehicle occupant(s).NOTE: Make sure to apply a thin coat of anti-seize lubricant only to the interface betweenthe wheel pilot bore and the hub pilot. Do not allow the anti-seize to make contact with the wheel-to-brake disc/drum mounting surface, wheel studs, wheel nuts, brake pads or brakedisc friction surfaces or damage to components may occur.WARNING: Retighten wheel nuts within 160 km (100 mi) after a wheel is reinstalled.Wheels can loosen after initial tightening. Failure to follow this instruction may result in serious injury to vehicle occupant(s).NOTE: Failure to tighten the wheel nuts in a star/cross pattern can result in high brake disc runout, which accelerates the development of brake roughness, shudder and vibration. NOTE: The wheel nut torque specification is for clean, dry wheel stud and wheel nut threads. NOTE: Final tightening to be performed with vehicle resting on tires.STEP 23: Clean the mounting surface of the wheel. Apply the substance from the specified tube.Material: High Temperature Nickel Anti-Seize Lubricant / XL-2NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTSSTEP 24: Position the wheel and install the wheel nuts. Tighten the wheel nuts in a star pattern. Torque to: 148 lb.ft (200 Nm)。

大华监控系统中文版使用手册

2.1
软件安装 ........................................................................................................................................... 2
2.2
3.7.4.3 解码器控制 ..................................................................................................................... 25
3.7.4.4 设备运行状态 ................................................................................................................. 27
常用界面按钮 ................................................................................................................................. 12
3.4
视频窗口按钮 ................................................................................................................................. 13
3.7.1 设备列表 ................................................................................................................................. 21

GMK4100B全地形吊车辆产品指南说明书

GMK4100BProduct Guide features•36-167 ft. (11.1-51 m)6 section full powerMega Form boom with Twin Lock pinning•28.5-49 ft. (8.7-15 m) hydraulic offset bi-fold swingaway•1x 19.7 ft. (6 m) intermediate lattice insert•37,000 lb. (16.8 t) counterweight withhydraulic removal system•Mercedes-Benz OM 501 LA, 390 hp(290kW), torque 1365 ft./lb. (1850 Nm)•MEGATRAK independent hydro-pneumaticsuspensionPreliminaryAll Terrain CraneBoom36 ft. -167 ft. (11.1 m -51 m) 6 section, full power Mega Form boom with Twin Lock Pinning. Maximum tip height: 177 ft. (54 m)Boom NoseSix nylatron sheaves, mounted on heavy duty tapered roller bearings with removable pin-type rope guards. Quick reeve boom nose. Removable auxiliary boom nose with removable pin type rope guard.Boom ElevationSingle lift cylinder with safety valve provides boom angle from -3° to +82°.Hydraulic Offsettable Lattice Extension28.5 ft. –49 ft. (8.7 -15 m) bi-fold lattice swingaway extension, hydraulically offsettable and luffing under load, 0°-40°.Maximum tip height: 226 ft (69 m)*Offsettable Lattice Extension28.5 ft. –49 ft. (8.7 -15 m) bifold lattice swingaway extension, manual offsettable at 0°, 20° and 40°. Maximum tip height: 226 ft. (69 m)* Lattice ExtensionOne 19.7 ft. (6 m) insert for use with lattice swingaway extension to increase length to 69 ft. (21 m). Maximum tip height: 246 ft (75 m)Load Moment & Anti-Two Block SystemLoad moment and anti-two block system with audio/visual warning and control lever lockout provides electronic display of boom angle,length, radius, tip height, relative load moment, maximum permissible load, load indication and warning of impending two-block condition.CabAll aluminum constructed cab with acoustical lining, hydraulic tilted to 20°. Includes tinted safety glass, adjustable operator’s seat with hydraulic suspension, opening windows at side and rear, hinged windshield with wiper, sun visor and window shade. Other features include diesel heater/defroster, armrest integrated crane controls, drive/steer controls and ergonomically arranged instrumentation.Swing2 axial piston planetary gear boxes with fixed displacement motors. Infinitely variable to 1.8 rpm. Free swing with holding(rocker switch) and service(foot pedal) brake.Counterweight37,000 lbs. (16.8 t)consisting of various sections with hydraulic installation/removal system controlled from the superstructure cab.Hydraulic System2 separate circuits, 1 axial piston variable displacement pump (load sensing) with electronic power limiting control and 1 gear pump for swing. Thermostatically controlled oil coolers keepoil at optimum operating temperature.Tank capacity: 180 gal. (680l)HoistMain and auxiliary hoist are powered by axial piston motor with planetary gear and brake.“Thumb-thumper” hoist drum rotation indicator alerts operator of hoist movement.Main AuxiliaryLine length:720 ft. 720 ft.(220 m) (220 m)Rope diameter: 16 mm 16 mmLine speed: 410 ft./min.410 ft./min.(125 m/min)(125 m/min)Line pull: 11,240 lbs.11,240 lbs.(50 kN)(50 kNSuperstructure Specifications*Denotes optional equipmentCarrier SpecificationsChassisBox type, torsion resistant frame is fabricated from high strength steel.Outrigger SystemFour hydraulic single stage outrigger beams with vertical cylinders and outrigger pads, 19.7” (500 mm) square . Outrigger can be set in 4 positions:Full-23‘ (7 m)Partial-19.7’ (6 m)Partial-16.4’ (5 m)Retracted-7.6’ (2.3 m)Independent horizontal and vertical movement controlled from each side of carrier and the superstructure cab. Electronic crane level indicators.EngineMercedes-Benz OM 501 LA six cylinder, water cooled, turbo-charged, with 390 bhp (290 kW) @ 1800 rpm. Max. torque 1,365 ft./lb. (1 850 Nm) @ 1080 rpm. Compression and exhaust brakes.Engine emissions: EUROMOT/EPA/CARB (off road) Fuel Tank Capacity106 gallons (400 L).TransmissionZF, AS Tronic, 12 speeds forward, 2 reverse.Drive/Steer8X6X8Axles1st axle line –drive/steer2nd axle line –steer (optional drive)3rd axle line –drive/steer (connects for all wheel steer)4th axle line –drive/steerDrive axles with planetary hub reduction and center mounted gearing. Inter-axle and cross axle differential locks.SuspensionGrove exclusive MEGATRAK suspension. Independent hydro-pneumatic system acting on all wheels with hydraulic lockout. Suspension can be raised 6.5” (170 mm) or lowered 5” (130 mm) both longitudinally and transversely. Features an automatic leveling system for highway travel.Tires6 tires, 16.00R25 (Vehicle width –9.0’ [2.75 m]) SteeringDual circuit, hydraulic power assisted steering system. Transfer case mounted, ground driven emergency steering pump. Axles 1,2 and 4 steer on highway. Separate steering of the 3rd and 4th axles for all wheel and crab steering, controlled by an electronic rocker switch.BrakesService brakes: pneumatic dual circuit acting on all wheels. Standard anti-lock brake system (ABS). Parking brake: pneumatically operated spring loaded brake acting on axle lines 2 and 4.Air dryer.CabTwo-man, aluminum construction with the following features: safety glass, driver and passenger seats with hydraulic suspension, engine-dependent hot water heater, complete instrumentation and driving controls. Cab tilts forward for easy engine access.Electrical System24V system with three phase alternator, 28V/100A 2 batteries, 12V/170 AhMaximum Speed49 mph (78.5 kph) 14.00 tires53 mph (85 kph) 16.00/20.5 tiresGradeability (Theoretical)70% -14.00 tires63% -16.00/20.5 tiresMiscellaneous Standard Equipment Work light; tool kit; fire extinguishers; auxiliary boom nose; radio /CD player in carrier cab,heated rear view mirrors, wind speed indicator.Optional Equipment*Work lights, mounted on boom base section*Boom mounted aircraft warning light*Timer for diesel heater*Radio/CD player for superstructure cab*Stainless steel exhaust system with spark arrestor *Air conditioning*Hook blocks/Headache Ball*14.00R25 tires (vehicle width 8.4 ft.(2.55 m)*20.5R25 tires (vehicle width 9.5 ft.(2.88 m)*8x8x8 drive/steer*Electric driveline retarder*Engine independent diesel cab heater, with engine pre-heater*Strobe light*Cab mounted work light*Working range limiter*Work lights for outriggers*Data logger*Spare tire and wheel with carry bracket*Aluminum edging for decking*Rear mounted stowage box*Outrigger pad load indicator*Denotes optional equipment41.1 ft.(12530)36.1 ft.(11000)11.6 ft.(3525)10.4 ft.(3160)* 12.6 ft.(3845)1.4 ft.(438)4.8 ft.(1450)5.4 ft.(1650)1.4 ft.(425)6.9 ft.(2100)5.4 ft.(1650)4.1 ft.(1250)5.8 ft.(1770)5.9 ft.(1812)33.8 ft.(10308)39.7 ft.(12120)Weights & DimensionsBasic Weights - lb. (kg.)Mercedes power, 14.00R25 tires, 8x6x8 drive/steer, 20,500 lb. (9.3 t)counterweight52,910(24 000)52,910(24 000)105,820(48 000)Axles 1 & 2Axles 2 & 3Total* 14.00 tires1.1,100 lb. (500 kg.)2. 2,866 lb. (1 300 kg.) Bolted3. 5,512 lb. (2 500 kg.)4. 11 023 lb. (5 000 kg.)3.4’(1050)4. 11 023 lb. (5 000 kg.)5. 5 512 lb. (2 500 kg.)8.3’(2530)3.9’(1190)Counterweight Configurationslb.(kg.)123453,900 (1800)x x9,400 (4300)x x x14,900 (6800)x x x x20,500 (9,300)x x x x26,000 (11 800)x x x x x31,500 (14 300)x x2x x37,000 (16 800)x x x2x x40°20°0°82°3.73.72.03.74.84.84.21.88.28.25.52.414.614.65.52.069’ (21m)49’ (15m)28.5’ (8.7m)167’ (51m)33’(10m)66’(20m)98’(30m)131’(40m)164’(50m)033’(10m)66’(20m)98’(30m)131’(40m)164’(50m)197’(60m)230’(70m)62’ (19m)36’ (11m)141’ (43m)89’ (27m)114’ (35m)24.213.96.64.242.316.89.07.776.1116.8* 200.040.615.411.039.522.562.8X 1000 lb.Range DiagramMain Boom 360° (75% Stability)Maximum Counterweight Outriggers Fully Extended36.1'49.5'62.3'75.5'88.6'102.4'114.2'128'141.1'154.2'167.3'RADIUSRADIUS8* 200.089158.0910148.0125.0116.0102.076.01015108.0104.096.091.076.057.0152086.085.083.077.073.057.042.431.4202566.068.067.063.062.055.042.431.424.2253053.052.052.049.048.039.831.424.218.214.6303540.841.641.041.639.436.031.024.218.214.6354033.433.434.432.830.829.024.218.214.6404527.829.028.627.626.225.424.018.214.6455024.224.624.223.222.421.821.418.214.6505521.220.819.819.019.018.817.814.6556018.217.817.016.216.816.416.614.6606516.015.614.614.015.814.214.814.6657013.612.812.014.012.813.613.2707512.011.010.612.611.812.411.875809.69.611.410.811.010.280858.49.09.89.89.89.28590 6.28.48.89.08.68.090958.07.88.07.67.095100 6.87.2 6.8 6.2100105 6.2 6.4 6.0 5.6105110 5.4 5.8 5.2 4.8110115 3.85.2 4.8 4.2115120 4.64.2 3.6120125 3.8 3.0125130 3.22.61301352.2135* Over the rear with special equipmentx 1000 lb.Boom Length0°20°40°0°20°40°0°20°40°Radius Radius 40.08.2 4.840.045.08.2 4.845.050.08.28.0 4.8 3.850.055.08.28.07.0 4.8 3.855.060.08.28.0 6.8 4.8 4.6 3.860.065.08.28.0 6.8 4.8 4.4 3.865.070.08.27.8 6.6 4.8 4.2 3.8 3.870.075.08.27.6 6.6 4.8 4.2 3.6 3.8 3.875.080.08.27.4 6.6 4.8 4.2 3.6 3.8 3.8 3.480.085.08.27.2 6.6 4.8 4.0 3.6 3.8 3.8 3.485.090.08.07.2 6.6 4.8 4.0 3.4 3.8 3.8 3.490.095.07.47.0 6.6 4.8 3.8 3.4 3.8 3.8 3.495.0100.0 6.6 6.8 6.4 4.8 3.8 3.4 3.8 3.8 3.4100.0105.0 5.8 6.2 6.4 4.6 3.8 3.4 3.8 3.8 3.4105.0110.0 5.0 5.4 5.8 4.4 3.6 3.4 3.8 3.6 3.4110.0115.0 4.4 4.8 5.0 4.2 3.6 3.4 3.8 3.6 3.2115.0120.0 3.8 4.2 4.4 4.0 3.6 3.2 3.8 3.4 3.0120.0125.0 3.2 3.8 3.8 3.8 3.6 3.0 3.8 3.4 3.0125.0130.0 2.8 3.2 3.2 3.2 3.4 3.0 3.4 3.4 3.0130.0135.0 2.42.8 2.82.83.2 3.0 3.0 3.4 3.0135.0140.0 2.22.43.0 3.02.43.0 3.0140.0145.0 2.6 2.8 2.2 2.6 3.0145.0150.0 2.2 2.41.82.2 2.6150.0155.02.02.02.2155.0x 1000 lb.Boom Extension Length28.5'49'69'Boom Extensions 360° (75% Stability)Maximum Counterweight Outriggers Fully ExtendedConstant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice.Illustrations shown may include Grove Worldwide--Headquarters 1565 Buchanan Trail East P.O. Box 21Shady Grove, Pennsylvania 17256-0021USAMercedes-Benz OM501LA 390 bhp (290kW)@ 1800rpm1365 ft./lb. torque (1850 Nm) @1080 rpmZF AS Tronic12 speeds fwd, 2 rev0°-40°GMK4100BFeatures and BenefitsMEGATRAKIndependentsuspension and all wheel steer systemallows wheels to remain on the ground at all times so stresses and weight are notcontinually transferred between axlesTWIN-LOCKBoom pinning mechanismautomatically pins the sections in position using two horizontal large diameter boom pinsLUFFING BI-FOLD SWINGAWAY Hydraulically offset lattice bi-foldswingaway lets the operator set the offset from 0°-40°while under load, from the superstructure cab。

数控车床新代说明书

目录第一单元新代控制器面板操作说明 (2)1.1新代控制器面功能树状图 (2)1.2 屏幕部分 (3)1.3主功能界面 (4)1.3.1 F1：機台設定 (5)1.3.1.1 F1：座標切換. (6)1.3.1.2 F2：1/2 座標. (6)1.3.1.3 F3：清除座標. (6)1.3.1.4 F4：相對座標全部清除 (6)1.3.1.5 F5：座標偏移量 (7)1.3.2 F2：程式編輯 (8)1.3.2.1 F1：插入循環 (9)1.3.2.2 F2：刪除行 (9)1.3.2.3 F3：編輯循環 (10)1.3.2.4 F5：檔案編輯子功能 (11)1.3.2.5 F7：圖形模擬 (15)1.3.2.6 F8：檔案管理 (17)1.3.4 F4：執行加工 (19)1.3.4.1 F1：座標顯示 (19)1.3.4.2 F2：圖形調整 (20)1.3.4.3 F3：MDI 輸入 (21)1.3.4.4 F4：加工參數設定 (22)1.3.4.5 F8：工作記錄 (23)1.3.5F5：警報顯示 (24)1.3.5.1 F1：現存警報 (24)1.3.5.2 F2：歷來警報 (24)第二单元机械操作面板说明 (25)2.1 第二面板操作功能說明 (25)2.1.1电源开 (25)2.1.2电源关 (25)2.1.3紧急停止 (25)2.1.4原点模式寻原点功能 (25)2.1.5手动运动模式 (25)2.1.6手动寸动模式 (26)2.1.7MPG寸动模式 (26)2.1.8自动加工模式 (26)2.1.9MDI加工模式 (27)2.1.10MPG模拟功能 (27)2.1.11单节执行 (27)2.1.12主轴控制 (28)2.1.13工作灯 (28)2.1.14加工液 (28)2.1.15程序暂停 (28)2.1.16快速归始 (28)2.1.17快速进给的速度 (28)2.2文字键说明: (29)第三单元使用新代控制器的方法 (30)3.1 原点复归 (31)3.2 手动功能(JOG ,INC_JOG ,MPG) (32)3.3 设定工作坐标(G54..G59) (33)3.4 开启档案(编辑/联网文件夹) (34)3.5 指定一个执行NC程序(自动) (35)3.6 刀具设定(G40/G41/G42 ,G43/G44/G49) (36)3.7 刀具长度量测(G43/G44/G49) (37)3.8 手动资料输入(MDI ) (38)3.9 图形模拟 (39)3.10在新代控制器下检查NC程序 (40)第四单元程序制作指令说明 (41)4.1G码指令一览表 (41)4.2M码指令说明 (42)第五单元新代控制器网络连接 (44)5.1网络设定 (44)5.2网络疑难问题解决方法 (47)5.3 联网最重要的三点 (51)第一单元新代控制器面板操作说明1.1 新代控制器面功能树状图座標切換1/2 座標清除座標相對座標全部清除設定工件座標系統機台設定F1插入循環刪除行編輯循環搜尋置換行數搜尋拷貝行插入行檔案編輯子功能快速定位教導直線切削教導圓弧教導取消圓弧中點教導刪除行教導步進連續放大縮小回復取消模擬參數設定圖形模擬開啟新檔拷貝檔案刪除檔案磁碟機輸入輸出至磁碟機RS232 輸入RS232 輸出檔案管理程式編輯F2圖形對話輸入F3座標顯示圖形調整MDI 輸入加工參數設定刀具設定工作表單執行加工F4現在警報歷來警報儲存警報警報顯示F5系統參數回到第一頁操作設定參數設定F6PLC I BitPLC O Bit PLC C BitPLC S BitPLC A Bit PLC Re gis te r PLC T ime r PLC Counte r PLC 狀態系統資料公用變數狀態軟體安裝系統備份本地語文安裝目前語文備份系統管理診斷功能F7操作指引F8CNC 銑床1.2 屏幕部分如下所示：本书面说明:（1）程式编号（2）标题（3）时间（4）日期（5）资料输入（6）提示（7）状态（8）功能键选择1.3主功能界面下图为新代控制器的主功能画面.新代控制器之操作，是利用屏幕下方之F1~F8功能键来操作，使用者仅须按下操作键盘上F1~F8之功能键即可进入对应的次功能:1.3.1F1：機台設定显示现在位置的各种坐标系统,并可用于相对坐标系统的重新设定.进入本书面请按下主功能画面下的“F1 機台設定”。

OTP6126用户手册V1.00 101126

4.3 电气安全信息...............ቤተ መጻሕፍቲ ባይዱ............................................................................. 7
5 设备安装............................................................................................ 7
3 规格特性............................................................................................ 6
3.1 环境要求..................................................................................................... 6 3.2 电源和电池................................................................................................. 6 3.2.1 交流/直流适配器............................................................................ 6 3.2.2 锂离子充电电池............................................................................. 6 3.3 功耗.............................................................................................................6 3.4 尺寸和重量................................................................................................. 6