Module 2_16Way_v2.0

合集下载

电机控制开发套件motorBench 2.25说明书

Dashboard/…/motorBench 2.25 ReleasemotorBench 2.25.0 Release NotesCreated by Fernando Garibaldi, last modified by Jason Sachs 2 minutes agoOverview of motorBench® Development SuiteWhat’s NewSystem RequirementsSupported HardwareHigh-voltage hardwareOther hardware required with both low-voltage and high-voltage setupsInstalling motorBench® Development Suite 2.25.0RepairsMotor Control Fixed IssuesChanges since revision 2.15Known IssuesMotor Control IssuesLimitationsSupported DevicesSoftware LimitationsMotor Control LimitationsSupported Motor ParametersCustomer SupportThe Microchip Web SiteAdditional SupportOverview of motorBench® Development SuiteMicrochip motorBench Development Suite is a graphical, interactive development environment designed to help motor control engineers to design and implement motor control systems, from very basic to very sophisticated ones.motorBench® Development Suite allows the user to:configure a motor systemmeasure motor parameterstune the controller gainsgenerate code to spin the motorWhat’s New1. Motor Control Application Framework (MCAF) R5 – see MCAF User's Guide for more information.a. Added support for dsPIC33CK256MP508b. Added Angle-tracking PLL (ATPLL) supportc. Improved Customize page support in motorBench2. Customizea. Allow advanced customization of MCAF code generation3. Measurea. Updated fault handing logic to detect if an invalid load is connected to the inverter before starting motor parameter measurement or Board calibrationb. Improvements to support motors with large values of stator inductancec. Improvements to support motors with large inertia and high cogging torque4. MCC Integrationa. Improved support for MCC-generated peripheral and system initialization code5. Device Supporta. Added support for dsPIC33CK256MP508i. This device is not yet supported by the motor parameter measurement featureSystem RequirementsMPLAB X 5.30 or later.XC16 compiler version:Firmware generated by motorBench® Development Suite has been tested with XC16 1.41.33EP devices: XC16 1.36 or later are expected to work with motorBench®Development Suite but have not been extensively tested.33CK devices: Either of the following is required:XC16 1.50 or laterXC16 1.41 with DFP 1.2.66 or laterMPLAB Code Configurator®(MCC) Plugin Version 3.95.0 or laterPIC24/dsPIC33/PIC32MM library 1.166.0 or laterSupported HardwareThis release of motorBench®Development Suite supports both low-voltage and high-voltage setups.Low-voltage hardware1. dsPICDEM MCLV-2 Development Board [Part Number: DM330021-2]2. dsPIC33EP256MC506 External Op Amp Motor Control PIM [Part Number: MA330031-2] with silicon revision A8 or dsPIC33CK256MP508 External Op Amp Motor Control Pim[Part Number: MA330041-1].3. A three phase PMSM or BLDC motor that is compatible with 24V, such as the Hurst 24V BLDC motor DMA0204024B101 [Part Number: AC300022].4. 24V power supply [Part Number: AC002013] - ensure this connects to AC mains using a 2-prong cable. If you have an AC002013 with a 3-prong cable, please contact Microchip.High-voltage hardware1. dsPICDEM MCHV-2 Development Board [Part Number: DM330023-2] or dsPICDEM MCHV-3 Development Board [Part Number: DM330023-3]AC mains voltages 120VAC 60Hz and 220VAC 50Hz have been tested.2. dsPIC33EP256MC506 External Op Amp Motor Control PIM [Part Number: MA330031-2] with silicon revision A8 or dsPIC33CK256MP508 External Op Amp Motor Control Pim[Part Number: MA330041-1].3. A three phase PMSM or BLDC motor that is compatible with rectified AC mains voltage, such as the Leadshine 400W BLDC motor EL5-M0400-1-24 [Part Number: AC300025].Other hardware required with both low-voltage and high-voltage setups1. A USB-to-logic-level-UART converter from the following list:a. Saelig USB-COM-U or USB-COM-U13b. TRENDnet TU-S9 v2.02. Programming tool - one of the following tools: Real ICE, ICD33. Board calibration load resistors - this is optional, please see motorBench® Development Suite User's Guide document for more detailsInstalling motorBench ® Development Suite 2.25.0To install the MPLAB ® Code Configurator v3.95 Plugin1. In the MPLAB® X IDE, select Plugins from the Tools menu2. Select the Available Plugins tab3. Check the box for the MPLAB® Code Configurator v3, and click on InstallTo install different peripheral library version or motorBench ® Development Suite version when connected to internet1. Create a project with dsPIC33EP256MC506 or dsPIC33CK256MP508, or use the sample project.2. Open MPLAB® Code Configurator3. In the Versions tab under PIC24/dsPIC33/PIC32MM MCUs, find the multiple library versions (loaded version is indicated by the green check mark)4. Right-click on the required version of the library and select Mark for Load5. In the Versions tab under motorBench ® Development Suite find the multiple library versions (loaded version is indicated by the green check mark)6. Right-click on the 2.25.0 version of the library and select Mark for Load7. Click on Load Selected Libraries button to load the marked libraries.To install different peripheral library version or motorBench® Development Suite version when not connected to internet1. In the MPLAB® X IDE, select Options from the Tools menu2. Select Plugins tab3. Click on Install Library4. Add pic24-dspic33-pic32mm_v1.166.mc3lib5. Add motorBench_2.25.0.mc3lib6. Restart MPLAB® X IDERepairsMotor Control Fixed IssuesChanges since revision 2.15The following aspects of motorBench® Development Suite and the Motor Control Application Framework (MCAF) have been updated:MCAF has been updated to R5, includingChanges in R2:Support for DC link compensationSupport for overmodulationSupport for wider range of low-voltage motorsUpdated HAL for future MCHV2 supportUpdated Motor Control LibraryNumerous minor fixesChanges in R3:MCC system module compatibilityMCHV-2 and MCHV-3 supportInverter maximum current now has a 1:1 ratio with the maximum commanded dq-frame current of the drive, operating in FOC (in R2 this incorporated a deratingfactor)Other minor fixesChanges in R4:MCC peripheral supportParameter customizationQuadrature encoder supportAdded new startup method (Weathervane startup)Other minor fixesChanges in R5:Added device support for dsPIC33CK256MP508Added Angle-tracking PLL (ATPLL) sensorless estimatorImproved motorBench Customize page supportOther minor fixesSections in this release notes affected:Other RequirementsLimitationsSupported Motor ParametersKnown IssuesPlease note:We do not recommend using the MCP2200 USB to RS232 Demo Board [Part number: MCP2200EV-VCP ] with this release of motorBench® Development Suite.While testing, we have observed more frequent occurrence of a serial communication timeout issue while running motor parameter measurement using this cable.See Known Issues section of this document for more information (MCGUI-1141)Motor parameter measurement is only supported on dsPIC33EP256MC506 device.Issue Key Summary WorkaroundMBPLAN-673Serial port does not get closed programmatically when MCC exits during motor parametermeasurementIf you exit SC during execution, restart MPLAB X.MBPLAN-932Exception during attempted creation of a runtime properties class No workaround needed, this issue doesn't have an impact on thefunctionality.MBPLAN-984Improve error reporting for SC build errors in the event of a code generation failureMBPLAN-1095Switching projects after loading motorBench erroneously allows motorBench code to generate for new projectMBPLAN-1160"Import Motor" and "Export Motor" buttons can be clicked multiple times, opening multiple dialog boxesMotor Control IssuesIssue Key SummaryDB_MC-411Current calibration happens only once (at part reset) rather than upon entry to MCSM_RESET stateDB_MC-560Speed controller exhibits chattering behavior at voltage saturation hysteresis boundary (MCAF)DB_MC-978"Soft start" gate drive in board_service.c has duty cycle that is too smallDB_MC-1092PLL estimator may not converge into rotor reference frame while using the Classic startup method in MCAFDB_MC-1396PLL calculations in code generation do not allow motor.velocity.nominal to be more than 1250Hz electrical (=20kHz/8/2)DB_MC-1415With some motors and 12V operation, increased velocity margin improves startup but creates unstable estimatorDB_MC-1430Quanum MT4012 unstable in closed-loop operation at 4200 RPM speed and aboveDB_MC-1491With Quanum MT4012, MCAF may not detect stallDB_MC-1492Quanum MT4012 Stalls on pressing 'S3'(reverse) at low speeds and on changes to speed command potentiometerDB_MC-1495Anaheim BLY342D-24V-3000, BLY342D-48V-3200 motors creates hardware over-current during stall-detect testingDB_MC-1521Closed loop speed step response overshoot - MCHV2, Leadshine 400DB_MC-1892Some motors with extreme parameters may produce out-of-range error for stall_detect.group.timerCountsVarianceDetect (detected in Monte Carlo analysis)DB_MC-1920Board service isrCount-based timing is not guaranteedDB_MC-1922LED patterns not displayed when in the TEST_DISABLE or TEST_ENABLE statesDB_MC-2122BLWS232D motor startup in QEI mode causes a false detect for stall-detectionDB_MC-2213Deadtime needs to be changed in both MCC and motorBench to affect codeDB_MC-2275Large current rampup times may not start (STARTUP_TORQUE_RAMPUP_RATE = 0)DB_MC-2309QEI tracking loop Kp and Ki produce out-of-range errors for low-speed motorsDB_MC-2323Weathervane transition state should not have active damping enabledDB_MC-2387DC link voltage measurement may have too much phase delay for MCAF DC link compensation to work effectivelyDB_MC-2606MCC-generated code has incorrect IESO/FNOSC config bits for 33CKDB_MC-2671MCAF_CaptureTimestamp calls incorrect timer function for 33CK devicesDB_MC-2785Current sense signal integrity issue with 33CK during overmodulationLimitationsSupported DevicesmotorBench® Development Suite supports these devices:1. dsPIC33EP256MC5062. dsPIC33CK256MP508Software LimitationsmotorBench® Development Suite is tested for serial communication using Windows 7 and Windows 10 platforms. Other platforms may work with standard baud rates, but this operation has not yet been verified.Motor Control LimitationsFollowing are the known limitations for this release of motorBench® Development Suite:1. One mechanical load - constant load. This represents a mechanical load with constant inertia, viscous damping, and friction. The velocity control loop can generally rejectexternal disturbance torques, within the rated current of the motor and board, and within the bandwidth of the velocity control loop. Mechanical loads with time-varying or angle-varying inertia, viscous damping, and friction, such as a blower, compressor, or pump, are currently not supported.2. One motor type - PMSMMCLV-2:The reference motor is the Nidec Hurst motor DMA0204024B101 (MicrochipDirect part number AC300022). Microchip has also validated motorBench® DevelopmentSuite (including motor parameter measurement) with motors with parameters plotted below. Please also read the following section on Supported Motor Parameters. IfmotorBench® Development Suite is unable to spin a motor successfully, please contact Microchip staff for additional assistance.(Note: Mechanical time constant (2/3)×JR/Ke² represents the time constant of velocity acceleration under an open-loop synchronous-frame voltage step, neglecting the effects of inductance, with J, R, and Ke expressed in canonical metric units. R is expressed as line-neutral resistance = half of line-line resistance, and Ke is expressed as V/(rad/s) line-neutral zero-peak = Vrms/KRPM (line-line) × 0.007796968)MCHV-2/MCHV-3:The reference motor is the Leadshine 400W motor EL5-M0400-1-24 (MicrochipDirect part number: AC300025). Microchip has validated motorBench® DevelopmentSuite (including motor parameter measurement) with motors with parameters plotted below. Please also read the following section on Supported MotorParameters. If motorBench® Development Suite is unable to spin a motor successfully, please contact Microchip staff for additional assistance.3. Boarda. dsPICDEM™ MCLV-2 development board. This release of motorBench® Development Suite is compatible with modifications to the board to alter its rated current orvoltage. Contact your local Microchip office to obtain the document "Using MCLV-2 with motorBench® Development Suite to support alternative current and/or voltageratings", which provides guidance for such modifications. Other modifications may not be compatible.b. dsPICDEM™ MCHV-2 and MCHV-3 development boards. This release of motorBench® Development Suite is compatible with unmodified MCHV-2 and MCHV-3development boards.4. Motors should be well-matched to the board and operating voltage. The nominal DC link voltage of the MCLV-2 board is 24V. This voltage can be changed by cutting jumperJ6 and using an appropriate power supply connected to the appropriate terminals of J7. Use of a mismatched motor (for example, a 12V motor used with a 24V DC link voltage) may cause a hardware over-current fault; in this case motor parameter measurement may fail with the message "Fault Code #10: Undefined Fault". Retry with an appropriate DC link voltage.5. Two PIMs and Two devices - dsPIC33EP256MC506 External OpAmp PIM with silicon revision A8 or dsPIC33CK256MP508 External OpAmp PIM. (Please see the HardwareSetup section of the motorBench User's Guide for important modifications to dsPIC33EP256MC506 External OpAmp PIM for use in MCHV-2 and MCHV-3.)6. One algorithm - FOC7. Estimators - PLL, QEI, ATPLL8. Motor parameter measurement:a. Performance criteria adjustment is not presently supported. This includes adjustment of phase margin and PI phase lag at crossover in the current loop; Microchip hasnot completed validation and documentation of these adjustments.9. Autotuning:a. Performance criteria adjustment of the current loop is not presently supported. This includes adjustment of phase margin and PI phase lag at crossover; Microchiphas not completed validation and documentation of these adjustments.b. Use of performance criteria adjustment of the velocity loop is not fully documented or tested. We recommend not adjusting phase margin or PI phase lag unlessnecessary; cases where this is likely to occur are large inertias where αJ = JR/LK m2 > 10, for which an increase of phase margin is appropriate. Phase margin valuesbetween 70 and 85 degrees are recommended in this case, with larger values providing additional stability at the cost of lower velocity bandwidth.10. Axis management not currently implemented - supports only one axis.11. Code generation:a. PWM switching frequency is fixed at 20kHz and does not reflect the value entered under Board parametersb. Integration with external user-supplied code may involve substantial changes. Some guidelines for this are given in the documentation for the Motor ControlApplication Framework. While it is possible to integrate the code generated from motorBench® Development Suite with external code, it is the responsibility of the end user to validate this combination.12. Required compiler settings:a. Optimization-O1 or greater; -O0 and -Os will both compile without errors but do not execute fast enough to complete within the 50 microsecond ADC ISR. Note: at higheroptimization levels, in-circuit debugging using MPLAB X will behave unreliably with respect to breakpoints and single-stepping through C code.The "Omit frame pointer" and "Unroll loops" settings must be enabled.b. Memory model:Large data model (handles using pointers, not direct addressing, to allow for more than 8K of program variables)Small scalar modelc. Additional options:-Wno-volatile-register-var -finlined. Test harness: In order for the test harness to be enabled, the symbols MCAF_TEST_PROFILING and MCAF_TEST_HARNESS should be defined.13. Recommended compiler settings:a. Additional options:-WundefSupported Motor ParametersSince version 2.15, motorBench®Development Suite supports a wide range of motors, subject to the following notes:Ranges of motor parameters (including rated values and computed metrics) must be within the limits noted in either range-limits-mclv2.html or range-limits-mchv2.html.These ranges were tested to ensure that code generation produced firmware constants that were within bounds.Motor parameter measurement does not need to complete successfully but valid motor parameters are required. Some motors may have too low of an inductance or resistance, and may fail motor parameter measurement.Other particular issues that may cause incompatibility with motorBench®Development Suite includeLarge inertia values – in this case, increasing voltage loop phase margin may prevent stability problems. (See "Autotuning" in the Limitations section of this document.) Rotor magnetic saliency – if there are significant differences between Ld and Lq (>10% difference) then some of the MCAF algorithms may not work optimally. Highermismatch between Ld and Lq is typically found in interior-permanent magnet (IPM) motors, and is an intentional feature of the design. See the MCAF User's Guide for more information.Large back-EMF harmonics – a quasi-sinusoidal back-emf is assumedIssues involving individual motor control algorithms, such as PLL estimator, motor startup, or stall detectionHigh cogging torqueMismatch between motor and drive (namely using a motor with current and/or voltage requirements significantly different from that of the hardware) Microchip cannot guarantee that motorBench®Development Suite will work correctly with all motors. If a particular motor does not work properly, please contact the MCU16 Motor Control Team for further guidance.Customer SupportThe Microchip Web SiteMicrochip provides online support via our web site at . This web site is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the web site contains the following information:Product Support – Data sheets and errata, application notes and sample programs, design resources, user’s guides and hardware support documents, latest software releases and archived softwareGeneral Technical Support – Frequently Asked Questions (FAQs), technical support requests, online discussion groups/forums (), Microchip consultant program member listingBusiness of Microchip – Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representativesAdditional SupportUsers of Microchip products can receive assistance through several channels:Distributor or RepresentativeLocal Sales OfficeField Application Engineering (FAE)Technical SupportCustomers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is available on our web site.Technical support is available through the web site at: 。

德威2系列数据采集模块与设备产品说明书

DEWE2Modular Data Acquisition SystemsemurtsnIdetacideDstnemurtsnIsdne-tnorFgninoitSeries Modules1H i g h s p e e d d a t a i n t e r f a ce2Data Acquisition ModuleSystem ArchitectureUser exchangeable TRION™ modulesSignal conditioning Flexible connectorpanelFiltering A/D conversionHigh speed data transfer and synchronizationDEWE2 System Architecture3Housing and Storage Controlling and AnalysisWide range of housingsDEWE2-A series All-in-one DEWE2-M series Mainframes DEWE2-F series Front-endsOne software for allFull hardware controlPowerful online or offline data processingAttractive online displays Fast data analysisPost processing and/or export to many file formats Simple reportsDEWE2 System Architecture4All-in-one instrumentsMainframesFront-endsMost compact, includes powerful i7 computer, brilliant display and keyboard, touchpad.Most convenient for all mobile applications like inspect-ing facilities, rotating machines, test stands, power generators, electrical machines, buildings, vehicles, aircrafts, trains, and anything else.Like the A-series but without display; keyboard and point-ing device are included loose.Very popular for applications where the instrument is installed in a poorly visible place for the user (e.g. in a car the instrument is often installed in the leg area of the passenger seat but the driver needs to see the screen) or laboratory applications and test rigs.F-series units don´t have a built-in computer but supply measurement data over a robust high-speed PCI Express bus. Multiple units can be daisy-chained.One popular application is to use F-series devices with a laptop computer for mobile applications.The second use of F-series devices is to expand A or M series instruments.A-seriesM-seriesF-seriesDEWE2 DefinitionsUse isolated inputs and differential inputs at the same timeInput connectors to match your sensorsAll TRION™ modules have a factory-exchangeable connector panelCustomized connector panels can be offered to match your sensors56ADC-clockB o a r d V o l t a g e [V ]7Fully battery poweredan internal buffer battery Need more battery time?Concerned about vibrations?Respectful of system restore?8SYNC it all!DEWE2 SynchronizationSynchronization of multiple DEWE2 systems via Sync-cableSync via TRION™ modulesTo use TRION-BASE or TRION-TIMING modules for synchronization of multiple units is the most convenient and easiest way.To create high channel count systems or for distributed measurements DEWE2 instruments sup-port multiple synchronization options. A special feature is the perfectly hardware synchronized video acquisition since also for data analysis the slogan ”a picture is worth a thousand words” istrue.Sync up to 1000 meters (IRIG DC, cable length delay compensation)Sync up to 100 meters via TRION-SYNC-BUSSync up to 100 meters via TRION-SYNC-BUSTwo DEWE2-A4 with option DW2-SYNCDEWE2-M13swith TRION-TIMING module DEWE2-M7swith TRION-BASE moduleDEWE2-A13with TRION-TIMING moduleDEWE2-A4with TRION-BASE moduleDEWE2-M7swith TRION-TIMING moduleExample:Two instruments synchronized via TRION-BASE modules (multiple units possible)Example: Three instruments synchronized via TRION-TIMING modules (multiple units possible)Sync via chassis optionsThese options do not block a module slot but need to be factory installed at time of initial order.Two instruments synchronized via DW2-SYNC option.WLANFactory installation only9VIDEO-SYNCHardware synchronized video of up to 200 frames per second(camera clocked by DEWE2 instrument):accurate per sample, no delaySoftware synchronized low-cost video (USB or PAL/NTSC cameras):optimized low latency, known delay of USB camera can be compensatedHigh speed video up to 500 000 frames per second:online sync for Photron cameras, post-sync for any high-speed .avi file.DEWE2 Synchronization Gigabit ethernet interface (up to 100 m cable length)SYNCDEWE2-A4 with optionTRION-BASE moduleDEWE-CAM-GIGE-120IRIGTwo instruments synchronizedto absolute IRIG timeGPSTwo instrumentssynchronized via GPSSynchronization to GPS or IRIG time-codeThere are 2 ways how to synchronize DEWE2 instruments very accurately to absolute time. Both, GPS time and IRIG time, enable execution of synchronized distributed measurements over unlimited distances. Each instrument (or array of instruments) must be connected to the time-code via a TRION-TIMING module. 10DEWE2A ll-In-OneInstrumentsDEWE2 All-in-One InstrumentsDW2-UPS-150-DCThe hot-swappablebatteries guaranteecontinuous operation with-out an external power source.A-seriesDEWE2-A7DEWE2-A4 withRemovable Solid State Disk DEWE2-A13S Y N CP C IeP C I eDEWE-818DEWE2-F18DEWE2-F18DEWE2-F4sPCIe connection up to 7 metersPCIe connection up to 7 metersTRION-SYNC-busDEWE2-F7s with optionDW2-LINK-PCIE-2-S11DEWE2 Front-endsDEWE2 F ront-endsF-series12DEWE2 M ainframesM-seriesDC PowerRS-232DEWE2-M7sDW2-UPS-150-DCThe hot-swappable batteries guarantee continuousoperation without external power sourceDEWE2-M13DEWE2 Mainframes13DEWE2-M13-MK19“ mounting kit for the DEWE2-M13 series, 4U MOB-DISP-12-A Very rugged external displayDEWE2 Mainframes14DEWE2-A4 / M4DEWE2-A4 / M44 slots for TRION™ series modules Isolated wide range DC power supplyOptional internal buffer battery for ~10 minutes Fully battery-powered by stackable battery pack Removable solid state diskPowerful Intel ®Core™ i7 processorChannel ExpansionPCIe connection up to 7 metersTRION-SYNC-busDEWE2-F7s with option DW2-LINK-PCIE-2-SDEWE2-F7s with option DW2-LINK-PCIE-2-SDEWE2-A4 with two channel expansion chassis DEWE2-F7s15BAT-CHARGER-1BAT-CHARGER-4MOB-DISP-12 External displayDE-POWERBOX-12 DC Power distribution box FLEXRAY-INT-1 option DW2-LINK-PCIE-1-S optionSSD-32-64/128/256 Flash disk upgrade16DEWE2-A7 / A137 / 13 slots for TRION™ series modules Powerful Intel ® Core™ i7 processor Brilliant 17'' full-HD displayOptional fully battery poweredPCIe connection up to 7 meters PCIe connection up to 7 meters TRION-SYNC-busTRION-SYNC-busDEWE2-F7s with TRION-TIMING moduleDEWE2-F13s with option DW2-LINK-PCIE-2-SDEWE2-A7 with option DW2-LINK-PCIE-1-SDEWE2-A7 / A1317Shipping/carrying case for the DEWE2-A7 or DEWE2-A13 mainframe. Common-carrier rated, internal custom foam cut-out, high impact construction. Hasps for attaching padlocks, pull-out handle and wheels for easy transport External power supply, input voltage 10 to 36 V DC (max.), output 24 V DC 300 W Lithium-Ion battery, 14.4 V, 95 Wh, max. 8 ADesktop battery charger for 1 battery, incl. external AC adaptor Desktop battery charger for 4 batteries, incl. external AC adaptorBAT-CHARGER-1BAT-CHARGER-4DW2-A13-CC Shipping/carrying caseDEWE-DCDC-24-300-ISO Carrying bagDEWE2-A13DW2-SYNC optionDEWE2-A13 with DW2-A13-PS-BAT optionPCIe connection up to 7 meters (250 MB/s)TRION-SYNC-bus18DEWE2-M4s / M7s / M13sDEWE2-M4s / M7s / M13s4/7/13 slots for TRION™ series modules All connections at the frontIsolated wide range DC power supplyOptional internal buffer battery for ~10 minutes Powerful Intel ® Core™ i7 processorChannel ExpansionDEWE2-F13s with option DW2-LINK-PCIE-2-SDEWE2-M7s with option DW2-LINK-PCIE-1-SMOB-DISP-12 External display19BAT-CHARGER-1BAT-CHARGER-4DE-POWERBOX-12 DC Power distribution box DEWE2-M7s with option DW2-LINK-PCIE-1-S 4U 5UM13s installed into a 19” cabinet5 u required (4 u = system + 1 u = cooling)PCIe connection up to 7 metersTRION-SYNC-busDEWE2-F18 with option DW2-LINK-PCIE-2-SDEWE2-M13 with TRION-TIMING module and LINK-HOST-PCIE card20DEWE2-M1313 slots for TRION™ series modules Free PCI slots insideOne internal hard disk and 2 bays for removable disks 19” rack-mountable or benchtop useDEWE2-M13Channel Expansion21DEWE2-M13 with 2x option DW2-M13-BAY35-SATADEWE2-M13 and DEWE-TFT19-RM Rack-mounting 19“ display5 u required(4 u = system + 1 u = cooling)DEWE2-M13 with typical PCI slot configuration4U 5UPCIe connection up to 7 meters (250 MB/s)TRION-SYNC-bus 22DEWE2-F4s / F7s / F13sDEWE2-F4s / F7s / F13s4 or 7 slots for TRION™ series modulesPCI Express data link120 MB/s data transfer rateDEWE2-F13s withDW2-LINK-PCIE-2-S optionDEWE2-F7s withDW2-LINK-PCIE-2-S optionDEWE2-F4s withTRION-TIMING module Channel ExpansionBAT-CHARGER-1BAT-CHARGER-4DW2-UPS-150-DC,130 W UPS with 2 slots for batteries 23t i o n i n g F r o n t -e n d s I n s t r u m e n t s D LINK-HOST-PCIE DEWE2-F7s with optionDW2-PS-DC-150DEWE2-F13s with option DW2-LINK-PCIE-2-S DEWE2-F13s with optionDW2-PS-AC-REDDEWE-UPS-300-DC300 W UPS with 4 slots for batteriesDEWE2-F13s with optionDW2-F13x-MK24DEWE2-F1818 slots for TRION™ series modules PCI Express data link 120 MB/s data transfer rate19" rack-mountable or benchtop useDEWE2-F18Channel ExpansionSeries Modules Series Modules Overview25Series Modules26Series Modules27T R I O N -2402-d A C C -8-S M BT R I O N -2402-d A C C -6-B N C28Differential multi-function input moduleSampling: 24 bit; 204.8 kS/s per channelInput types:Voltage measurement from ±30 mV to ±70 V DC (46.7 V RMS AC)IEPEResistanceCurrent (using external shunt)Additional feature:AUX socketTRION-2402-dACCSeries Modules1)For safety reasons maximum allowed voltage: 70 V DC (46.7 V RMS AC)2930Differential universal input moduleSampling: 24 bit; 204.8 kS/s per channelInput types: Voltage up to ±10 VStrain gauge, bridge sensor, piezoresistive bridge IEPERTD; Pt100 to Pt2000Resistance, potentiometerTRION-2402-dSTG T R I O N -2402-d S T G -8-R JT R I O N -2402-d S T G -8-DT R I O N -2402-d S T G -6-L E M OSeries ModulesTRION-CBL-RJBN-01-00Isolated wide range voltage moduleSampling: 24 bit; 204.8 kS/s per channelInput types: Voltage ±300 mV to ±1000(2) VDCCurrentIsolation: 4 kVTRION-2402-VTRION-242-V-4-BTRION-242-V-8-BDAQ-SHUNT1(not compatible with TRION-x-V-4 modules)DAQ-SHUNT4DAQ-SHUNT5Shunts for TRION™ voltage input modulesCounter, DIO and synchronization moduleCounter channels: 2 SuperCounters™ Digital I/O: 8 DIO and 8 DISynchronization: IRIG code B, DC I/O and Sync I/OAdditional features:1 AUX socket (by default set to camera trigger)TRION-BASET R I O N -B A S ETiming and synchronization moduleTiming:Isolated IRIG input and output Synchronization: 2 TRION-SYNC-BUS interfaces Additional features:8x DIO, 1x counter, 1x AUXTRION-TIMINGT R I O N -T I M I N GIsolated SuperCounter™ moduleSampling 80 MHz time base204.8 kS/s per channelInput types Event, waveform timing and sensor modeProgrammable threshold and AC/DC coupling for ideal signal adaptionTRION-CNT T R I O N -C N T -6-L E MOCables for TRION-CNT modulesMating connectorIsolated digital input moduleNumber of channels: 48 isolated digital inputs (TRION-DIO-4800) Sampling:204.8 kS/s per channelTRION-DIO-4800T R I O N -D I O -4800TRION-CB24-B Options for TRION-DIO modulesTRION-CB24-SCIsolated high speed CAN interfaceInput types High speed, (low speed and single wire with optional converter)Listen only and programmable terminationDirect interface to CPAD2 module seriesTRION-CAN T R I O N -C A N -4-DT R I O N -C A N -2-DCables for TRION-CAN modulesADAP-CAN-LS-HS ADAP-LIN-CANOptionsARINC 429 module with up to 30 interfacesMIL-STD-1553 modules with up to 4 dual redundant channelsMixed modules with 8 ARINC and up to 5 dual redundant MIL-STD-1553 channelsT R I O N -A 429TRION-A429 / M1553 / MA4Model overviewAnalog output module2 channel TRION™ analog output module, based on NI PXI-6251voltage range max. ±10 V 16 bit resolutionUpdate rate max. 2.8 MS/sT R I O N -1628-A O -2TRION-1628-AO-2DEWETRONGmbH•Parkring4•A-8074Graz-Grambach•Tel(0043)31630700•Fax(0043)316307090•*****************。

外研版高二英语必修5_好题精练：Module2_课时小作业

Module2 课时小作业Ⅰ.语音知识1．standardA．|′stəndaːd|B．|′stændəd|C．|stændaːd| D．|′staːndəd|2．compareA．|kəm′pɛə| B．|kəm′peə|C．|kʌm′pɛə| D．|kʌm′peə|3．switchA．|′swik| B．|′swa itʃ|C．|′swiːtʃ| D．|′switʃ|4．volunteerA．|′ vɔlən′tiə| B．|vʌlən′tiə|C．|vʌluːn′t iə| D．|vɔlən′tiː|5．combinationA．|kɔm′bi′ neiʃn| B．|′kɔmbi′ neiʃn|C．|′ kɔmbi′neiʃn| D．|′ kɔmbinei′ʃn|Ⅱ.情景对话—Hello.I’m calling about the apartment you advertised.—Yes.__1__—I’m interest ed in a one-bedroom apartment.Do you have any available? —__2__When do you need it?—Sometime around next week.What can you tell me about this apartment? —__3__The monthly rent is $650，with a $300 security deposit.—__4__May I come over tomorrow to take a look?—Sure.What time would you like to come?—__5__—Good.May I have your name，please?—My name is Blanca.—Blanca.I’ll see you tomorrow.A．No，I have another oneB．Well，it’s a onebedroom apartment.C．It’s kind of youD．How about 10 a．m.?E．Yes.I have one.F．What kinds of apartments do you prefer?G．Sounds good.Ⅲ.单项填空1．—I want a room for ten people to have a get-together.—Luckily there is one________.A．available B．qualifiedC．standard D．impressive2．The trade union intended to call on the workers to go on strike________the government’s limitation on exports.A．in memory of B．in honour ofC．in response to D．in need of3．The agent was about to sign his name to the document_____________，to our surprise，a stranger broke in to prevent him.A．while B．whenC．as D．until4．The air is badly polluted because some factories don’t__________the rules to protect the environment.A．appreciate B．regardC．honour D．respect5．Much notice has been________the problems with the home-staying children in China.A．paid to B．kept onC．taken of D．made up6．I took it for________that he would try to help me out of the difficulty，but he didn’t at all.A．sure B．certainC．granted D．possible7．(2009年江苏锡山模拟)Please leave your phone number______we can get intouch with you in case of emergency.A．so that B．on condition thatC．for fear that D．so long as8．—Do you think our team will beat theirs?—Our team have better players，so I ________our team will win.A．want B．preferC．wish D．expect9．On a________cold win ter morning，his________body was found in a lonely forest.A．frozen；freezing B．freezing；frozenC．frozen；frozen D．freezing；freezing10．After he retired from office，Rogers________painting for a while，but soon lost interest.A．took up B．saved upC．kept up D．drew up11．The headteacher，________with what the student said，nodded with a smile. A．tiring B．tiredC．satisfying D．satisfied12．The shopowner would sell the MP4 for 800 yuan，but my elder brother________only 600 yuan.A．asked B．chargedC．sold D．offered13．Your suggestion sounds fine________，but would it work________？A．in practice；in theory B．in theory；in practiceC．in advance；in theory D．in general；in practice14．We have seen that method________some other conditions and it does work. A．applied to B．applying forC．applies to D．apply for15．(2009年泰安模拟) Only those who have the patience to do simple things perfectly will________the skill to do difficult things easily.A．demand B．acquireC．accomplish D．achieveⅣ.阅读理解A(2010年郑州第一次检测) Willa Cather once said，“When people ask me whether writing has been a hard or easy road，I always answer with the famous saying: The end is nothing；the road is all.That is what I mean when I say writing has been a pleasure.I have never used the computer with the thought that one more task had to be done.”Like most writers，Willa Cather did n ot write books for the money that they brought her，but rather for the pleasure that came in their writing.Her works were，like her，simple and full of the vigor of her days in Nebraska，where she grew from child to young womanhood and where she developed a deep love for the treeless land of the great plain with its wild flowers，wheat fields and rivers.“It’s a rather strange thing about the flat country，” she wrote later.“It takes hold of you or it leaves you perfectly cold.A great many people find it very dull；they like a church tower，an old factory，a waterfall，the country all made to look like a German Christmas card ...But when I come to the open plain，something happens.I’ m home.I breathe differently.”1．Willa Cather wrote because she found writing________.A．simple and livelyB．opened up a road to successC．neither too hard nor too easyD．interesting and enjoyable2．What was the place like where Cather grew up?A．It was cold，plain and without a church.B．It was vast，open and flat.C．It was like a German Christmas card.D．It was a colorful world of wild flowers.3．When she said “It takes hold of you or it leaves you perfectly cold.”，Willa Cather meant that________.A．you either love the place or hate itB．you decide either to stay or to leaveC．some find the place warm；others find it coldD．some find the place peaceful；others find it wild4．What happens when Cather comes to the open plain?A．She breathes differently from others.B．She wants to make the place her home.C．She feels completely comfortable.D．She finds the place similar to her home.B(2010年福建四地六校联考) Every country tends to accept its own way of life as being the normal one and to praise or criticize others，as they are similar to or different from it.And unfortunately，our picture of the people and the way of life of other countries is often a distorted (扭曲的) one.Here is a great argument in favor of foreign travel and learning foreign languages.It is only by traveling in a country and getting to know its inhabitants and their language that one can find out what a coun try and its people are really like.And how different the knowledge one gains this way frequently turns out to be from the second-hand information gathered from other sources! How often we find that the foreigners whom we thought to be such different people from ourselves are not very different at all!Differences between peoples do，of course，exist and，one hopes，will always continue to do so.The world will be a dull place indeed when all the different nationalities behave exactly alike，and some people might say that we are rapidly approaching this state of affairs.With the much greater rapidity (快速) and ease of travel，there might seem to be some truth in this at least as far as Europe is concerned.However this may be，at least the greater ease of travel today has revealed (展示) to more people than ever before that the Englishman or Frenchman or German is not：some different kind of animal from themselves.5．Every country criticizes ways of life in other countries becau se they are_____.A．distorted B．normalC．similar to each other D．different from its own6．One who travels in a foreign country and learns its language will________. A．find out why its people are differentB．argue in favor of this country and the languageC．know the country and its people betterD．like its inhabitants and their language7．The knowledge one gains by traveling in a foreign country is often________. A．from second-hand informationB．gathered from other sources rather than its inhabitantsC．gained from the arguments about the countryD．different from what one had before the travel8．In this passage，th e author wants to say________.A．differences between peoples will gradually disappear because of the ease of travelB．differences between peoples do exist even though different nationalities behave exactly alikeC．differences between peoples will continue to exist and the world will be a dull placeD．differences between peoples will not exist as one hopes参考答案Ⅰ.语音知识1．B 2.B 3.D 4.A 5.CⅡ.情景对话1．F 2.E 3.B 4.G 5.DⅢ.单项填空1．A available可利用的，常跟在修饰词的后面；其他三项“qualified合格的；standard标准的；impressive印象深刻的”作定语常放在修饰词之前，且与题意不符。

八年级英语下册_Module 2 Unit 2 课时练习

Module 2 Unit 2 They have seen the Pyramids.一、单选题1._____ Greens are preparing for the coming Christmas.A. /B. AC. AnD. The2.—Today we have too many ways to chat with others, chat rooms, text messages and so on.—But we seem ________ the art of communicating face to face.A. to missB. gettingC. to loseD. finding3.Our school will ________ a big swimming pool next year.A. touchB. sendC. buildD. delete4.—Li Dong, do you know Zhang Jiqing?—Yes. He donated（捐赠）money to build old people’s homes and schools for so many years. His story ________ me.A. savedB. touchedC. missedD. cared5.—Simon, what’s the ________ of your success?—Well. I often cheer ________ up when I want to give up.A. secret; myselfB. secret; meC. way; myselfD. way; me6.—What do you think of Sanya?—Oh, it's a beautiful city. I _____ there for several times.A. have beenB. have been toC. have gone toD. have gone7.The two boys are twins, but they _____ each other.A. is different fromB. is different ofC. are different fromD. are different of8.—Do you know who is the first woman to fly_____?—Valentina Vladimirovna Tereshkova from Russia.A. in spaceB. in the space B. from space D. at space9.He watched Journey to the West last night. He thought it was one of _____ TV programmes.A. interestingB. more interestingC. most interestingD. the most interesting10.—Are all the boys from __________ in your school?—No, there are only five __________ in our school.A.German; GermansB.German; GermenC.Germany; GermansD.Germany; Germen二、用方框中所给单词的适当形式填空，每词仅用一次。

MED-V_2.0中文配置文档

内容1Trial指南简介2综述微软企业桌面虚拟化2.1什么是MED-V V 2.0 中的新功能2.2MED-V 2.0 组件3试用系统要求4MED-V 2.0 环境设置4.1MEDVADMIN 管理计算机配置4.2安装MED-V WORKSPACE PACKAGER4.3安装MED-V 主机代理5虚拟的电脑图像准备MED-V5.1配置Windows XP Mode虚拟机5.2密封使用Sysprep MED-V 图像5.3合并虚拟硬盘6部署MED-V 工作区6.1创建工作区部署包6.2部署MED-V 工作区6.3测试MED-V 工作区7管理MED-V 工作区7.1重定向URL 管理7.2管理MED-V 工作区设置8MED-V 管理工具包9操作安全最佳做法10附录a：准备Sysprep 映像1Trial指南简介本试验指南旨在帮助您快速设置测试环境中的Microsoft 企业桌面虚拟化（MED-V) 评价。

本指南提供了微软MED-V WORKSPACE PACKAGER和MED-V 主机代理安装Microsoft MED-V 组件所需的步骤的详细信息。

本指南将创建基于Windows XP 的客人（虚拟机），应用程序可以纳入Windows ® 7 主机环境。

本指南包括：MED-V WORKSPACE PACKAGER 和MED-V 主机代理，基于Windows Virtual PC 机的虚拟机准备MED-V、创建和部署MED-V 工作区管理MED-V、故障排除和探索MED-V 管理工具包的安装。

为了尽可能顺利地帮助此流程，我们建议您阅读本指南仔细之前安装Microsoft MED-V 平台。

本指南的观众本指南是为Microsoft Windows 系统管理员编写的。

作为信息技术(IT) 专业，您应该有足够的知识和经验来完成以下任务。

∙操作系统的设置和安装应用程序∙将计算机添加到域∙设置和舒适地工作，Active Directory ® 域名服务和微软域名系统(DNS)∙熟悉Windows Virtual PC产品文档MED-V 综合文档是在MED-V 技术中心，在微软TechNet 上可用/fwlink/？LinkId = 207065.TechNet 文档包括联机帮助入门MED-V、规划和部署、操作和故障排除。

【正运动】EIO1616总线扩展模块用户手册

前言本手册介绍了产品的安装、接线、接口定义和操作说明等相关内容。

本手册版权归深圳市正运动技术有限公司所有，在未经本公司书面授权的情况下，任何人不得翻印、翻译和抄袭本手册中的任何内容。

前述行为均将构成对本公司手册版权之侵犯，本司将依法追究其法律责任。

本手册中的信息资料仅供参考。

由于改进设计和功能等原因，正运动公司保留对本资料的最终解释权！内容如有更改，恕不另行通知！调试机器要注意安全！请务必在机器中设计有效的安全保护装置，并在软件中加入出错处理程序，否则所造成的损失，正运动公司没有义务或责任对此负责。

为了保证产品安全、正常、有效的使用，请您务必在安装、使用产品前仔细阅读本产品手册。

更新记录产品型号：EIO1616总线扩展模块文件名版本号版本（更改）说明更新日期更改人用户手册V1.51.增加端子规格及接线参考2.丰富前言版权说明及安全注意2.修改整体布局，丰富手册内容2023/4/4xcx安全声明●本章对正确使用本产品所需关注的安全注意事项进行说明。

在使用本产品之前，请先阅读使用说明并正确理解安全注意事项的相关信息。

●本产品应在符合设计规格要求的环境下使用，否则可能导致设备损坏，或者人员受伤，因未遵守相关规定引发的功能异常或部件损坏等不在产品质量保证范围之内。

●因未遵守本手册的内容、违规操作产品引发的人身安全事故、财产损失等，我司将不承担任何法律责任。

安全等级定义按等级可分为“危险”、“注意”。

如果没有按要求操作，可能会导致中度伤害、轻伤及设备损伤的情况。

请妥善保管本指南以备需要时阅读，并请务必将本手册交给最终用户。

安装危险◆控制器拆卸时，系统使用的外部供应电源全部断开后再进行操作，否则可能造成设备误操作或损坏设备；◆禁止在以下场合使用：有灰尘、油烟、导电性尘埃、腐蚀性气体、可燃性气体的场所；暴露于高温、结露、风雨的场合；有振动、冲击的场合；电击、火灾、误操作也会导致产品损坏和恶化。

注意◆安装时避免金属屑和电线头掉入硬件电路板内；◆安装后保证其硬件电路板上没有异物；◆安装时，应使其与安装架紧密牢固；◆如果控制器安装不当，可能导致误操作、故障及火灾。

外研版九年级英语下册Module 2 学情评估含答案

外研版九年级英语下册Module 2 学情评估英语九年级·下（WY版）时间：45分钟满分：100分一、单项选择。

(每小题2分, 共20分)1. —Mary, is that boy with glasses ____ new classmate?—Yes. Let's say hello to ____.A. our; heB. us; himC. ours; hisD. our; him2. Larry hopes ____ his English, so he keeps practicing it every day.A. to solveB. solvingC. to improveD. improving3. [易错题]—Is there ____ in today's newspaper?—No, there is ____ special.A. something new; somethingB. something new; nothingC. anything new; somethingD. anything new; nothing4. Wild animals are our friends. We shouldn't kill them ____ food or clothing.A. inB. withC. aboutD. for5. [易错题]We don't have enough nurses to look after the patients. At least ____ nurses are needed.A. other tenB. more tenC. ten moreD. ten another6. I didn't believe I could do it ____ I got to the top of Mount Tai.A. becauseB. untilC. soD. if7. He was ____ from the meeting because of his bad illness.A. absentB. presentC. freeD. different8. —Is your friend Michael still in Australia?—I don't know. I have ____ information about him because we haven't seen each other for ____ years.A. little; a fewB. a little; a fewC. a few; a littleD. few; a little9. Nobody taught her daughter how to use that app. She learned it all by ____.A. sheB. herC. herselfD. hers10. — ____ have you talked with your friends on WeChat?—Since I finished my homework.A. How farB. How oftenC. How soonD. How long二、完形填空。

Module 2 Unit 2 导学案

Unit 2They have seen the Pyramids.课型：读写课◎知识导航请预习下列重点单词、短语和句子，并完成下面的表格及相关训练(标•的为重点单词拓展内容)。

单词和短语重点单词名词1.德国Germany•(adj.)德国的；(n.)德国人；德语German2.法国France•(adj.)法国的；(n.)法语；法国人French3.塔tower4.国王；君王king5.女王；王后queen6.阿拉伯语Arabic•(adj.)阿拉伯的；(n.)阿拉伯人Arab7.方面；态度way•在许多方面in many ways形容词8.古老的；古代的ancient动词9.搬家；改变……的位置move10.派遣去；命令……去send•(过去式/过去分词)sent•(短语)派人去做某事send sb. to do sth.11.相混合；融合mix12.惦念；怀念；想念miss•(n.)错过•(n.)小姐；女士；年轻未婚女子Miss13.数；清点count•(短语)倒数；倒计时count down根据语境或提示，完成填空。

1．Space water is different from that on the earth.2．All the students are sleeping in the dormitory while Miss Sanders is working at the m oment.3．I am going to attend a computer programming competition this weekend.I really look forward to it. 4．Beethoven(贝多芬) was born in Germany(德国) and he was famous all over the world.5．My family was in trouble but my mum told me that we would find some ways to deal with it.6．On New Year's Eve，we usually count down to welcome the new year.7．The Robinsons moved to London last year because of Mr Robinson's new job.8．I haven't seen my mother for half a year. I miss her very much.佳句仿写请在教材中标出下面句子，并用句中黑体词或短语仿写句子。

外研版英语八年级下册Module2课文+知识点

外研版英语八年级下册Module2课文音频+视频+知识点◆◆◆01Moudle 2 单词ever ['evə] adv. 曾经;从来;在任何时候enter ['entə] v. (使)参加;(使)报名competition [ˌkɒmpəˈtɪʃn] n. 比赛;竞争prize [praɪz] n. 奖品;奖项first prize 一等奖dream [dri:m] n. 梦;梦想;[只用于名词前]梦寐以求的v. (dreamed/dri:md/, dreamed; dreamt/dremt/,dreamt)做梦;梦到;梦想afford [ə'fɔ:d] v. (有财力)买得起，付得起write about 编写;写作make up 编写;创作invite [ɪn'vaɪt] v. 邀请move [mu:v] v. 搬家;改变…的位置send [send] v.(sent/sent/, sent) 派遣去;命令……去Germany [ˈdʒɜ:məni:] n. 德国France [frɑ:ns] n. 法国tower ['taʊə] n. 塔ancient ['eɪnʃənt] adj. 古老的;古代的king [kɪŋ] n. 国王;君王queen [kwi:n] n. 女王;王后Arabic [ˈærəbɪk] n. 阿拉伯语way [weɪ] n. 方面; 态度mix [mɪks] v. 相混合;融合miss [mɪs] v. 惦念;怀念;想念count [kaʊnt] v. 数;清点count down 倒数;倒计时M2U1课文动画M2U2课文动画02电子课本03Moudle 2知识梳理【重点单词学习】1. experience n. 经验(不可数)，经历(可数)【例句】She has little experience because she has worked for only one month.He had many interesting experiences while travelling in Africa.[考题链接]Mr. Guo is a teacher of much teaching__________(经验).【用法】用作动词，表示“体验”“经历”等。

PMM L2-16B 人工模拟网络说明书

L2-16BTwo Lines Single Phase V-Network9 kHz - 30 MHz, 16 A for AC and DC powered EUTThe AMN - Artificial Mains Network, also known as LISN - Line Impedance Stabilization Network - is the ancilliary device intended for repeatable and accurate measurement ofthe disturbance voltage that an EUT (Equipment Under T est) may inject into the power line or mains.This is obtained by providing well known impedance value and phase response across the frequency range of the test.PMM L2-16B is suitable for measurement on AC single phase and DC power circuits from DC to 60 Hz. The equivalent V-Network circuit of 50 Ω // (5 Ω + 50 μH) with 250μH choke is fully compliant with the reference standards .PMM Artificial Mains Networks provide robust and stable mechanical construction, high quality electric components, easy and perfect grounding, solid input-output power con-nections. They can be used in conjunction with any EMI receiver or spectrum analyzer and offer features required for safe, repeatable and accurate measurements.Provided Features•Powering the EUT•EUT termination to a standardizedimpedance respect to the reference ground •Coupling of the measuring receiver to the disturbance generated by the EUT•Decoupling of the measuring receiver from unwanted RF signals from the power lineMain Features•9 kHz to 30 MHz frequency range•Up to 16A continuous rated output current •Suitable for DC to 60 Hz power lines•Built-in, selectable 150 kHz high pass filter •Artificial Hand circuit•Local and remote control from PMM EMI receivers•Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15, MIL-STD 461FAdvanced Test Equipment Corp. 800-404-ATEC (2832)L2-16B equivalent circuitL2-16BTwo Lines Single Phase V-Network 9 kHz - 30 MHz, 16 A for AC and DC powered EUTNarda Safety Test Solutions Srl Via Leonardo da Vinci, 21/2320090 Segrate (Milano) - ITALY Phone: +39 02 2699871Fax: +39 02 26998700E-Mail:********************Internet: www.narda-sts.itL 216B -F E N -30400 - S p e c i fi c a t i o n s s u b j e c t t o c h a n g e s w i t h o u t p r i o r n o t i c e•Electrical safety and presence of ground protection relays do require the installation of properly rated insulating transformer(s) between mains power line and AMN line inputs.•High mains noise may require the installation of properly rated mains filters to reduce the level of unwanted signals.9 kHz - 30 MHz 16 A 250 VAC 350 VDC DC - 60 Hz50 Ω // [5 Ω + 50 µH]with 250µH choke BNC female SCHUKO connector -10 °C to +45 °C -25 °C to +75 °C 230 x 105 x 285 mm 5,5 kgSPECIFICATIONSFrequency rangeContinuous rated output current Maximum permissible operating voltage (L/N) L/PE) AC supply frequency range Equivalent circuit RF output Test itemRated temperature Storage temperatureOverall Dimensions mm (W x H x D) WeightReceiversLISNRFI Filters• 7010: EMI receiver 150 kHz -1 GHz • 9010: EMI receiver 10 Hz - 30 MHz • 9010F: EMI receiver 10 Hz - 30 MHz• 9010/03P: EMI receiver 10 Hz - 300 MHz • 9010/30P: EMI receiver 10 Hz - 3 GHz •9010/60P: EMI receiver 10 Hz - 6 GHz• L3-32: 4 lines, 3-phase AMN, 32 A • L3-64: 4 lines, 3-phase AMN, 64 A• L3-64/690 4 lines, 3-phase AMN, 64A/690V • L3-100: 4 lines, 3-phase AMN, 100 A • L3-500: 4 lines, 3-phase AMN, 350 A• L1-150M: single-path, 50 Ohm etc AMN 150 A • L1-500 Single phase AMN, 500A•L2-D: Delta LISN for telecom, 2 A, 150 Ω• FIL-L2-16F: single phase RFI filter, 16 A • FIL-L2-24M: single phase RFI filter, 24 A • FIL-L3-32M: 3-phase+neutral RFI filter, 32 A •FIL-L3-70M: 3-phase+neutral RFI filter, 70 AOrdering Information:L2-16B single phase Artificial Mains Network Includes: power supply cable, RF cable, LISN remote control cable, user’s manual, calibration certificate.Optional accessories:LISN service kit(AC-BNC adapter for LISN verification and calibration)Related Products。

ArmorBlock 2-Port EtherNet IP 16-点数字模块参考手册

Wiring DiagramsArmorBlock 2-Port EtherNet/IP 16-point Digital Module Catalog Number: 1732E-8X8M12DRParts ListYour package contains one 1 732E ArmorBlock® module and these pinout guide wiring instructions.For complete installation instructions, see module publication number table and visit rok.auto/literature. Module Publication NumberModule Publication Number ArmorBlock 2-Port EtherNet/IP™ Module1732E-IN004ATTENTION: Two sets of mounting holes are used to mount the module directly to a panel ormachine. Mounting holes accommodate #8 (M4) pan head screws. The torque specification is1.13 N•m (10 in•lb).ATTENTION: This equipment is considered Group 1, Class A industrial equipment according toIEC/CISPR 11. Without appropriate precautions, there may be difficulties with electromagneticcompatibility in residential and other environments due to conducted and radiateddisturbance.ATTENTION: To comply with UL restrictions, this equipment must be powered from a sourcecompliant with the following: Limited Voltage/Current.2Rockwell Automation Publication 1732E-WD001G-EN-P - April 2020ArmorBlock 2-Port EtherNet/IP 16-point Digital Module Wiring DiagramsI/O Connectors Micro-style 5-Pin Input Female Connector Micro-style 5-Pin Output Female ConnectorEtherNet/IP ConnectorD-Code M12 Network Female ConnectorAuxiliary Power ConnectorMini-style 4-Pin Input Male Receptacle12453(View into connector)Pin 1Sensor source voltagePin 2 Input BPin 3 ReturnPin 4 Input APin 5 PE4480712453(View into connector)Pin 1Not used Pin 2 Output B Pin 3 Return Pin 4 Output A Pin 5 PE44807(View into connector)Pin 1M12_Tx+Pin 2 M12_Rx+Pin 3 M12_Tx-Pin 4 M12_Rx-Pin 5 Connector shell shield FE 4231544808423144809(View into receptacle)Pin 1Output power+Pin 2Sensor/MDL power+Pin 3Sensor/MDL power-Pin 4Output power-ArmorBlock 2-Port EtherNet/IP 16-point Digital Module Wiring DiagramsRockwell Automation Publication 1732E-WD001G-EN-P - April 20203SpecificationsEnvironmental Specifications AttributeValue Temperature, operatingIEC60068-2-1 (Test Ad, Operating Cold),IEC60068-2-2 (Test Bd, Operating Dry Heat),IEC 60068-2-14 (Test Nb, Operating Thermal Shock):-20...+60 °C (-4…+140 °F)Temperature, ambient, max 60 °C (140 °F)Operating voltage 12…30V DC Output current per channel, max0.5 A Output current per module, max4.0 A Enclosure type ratingMeets IP65/66/67/69K (when marked), and Type 4X, 6P with receptacle dust caps or cable termination.CertificationsCertification (when product ismarked)(1)(1)See the Product Certification link at rok.auto/certifications for Declarations of Conformity, Certificates, and other certification details.Value c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E322657.CE European Union 2014/30/EU EMC Directive, compliant with:EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)RCM Australian Radiocommunications Act, compliant with:EN 61000-6-4; Industrial EmissionsKC Korean Registration of Broadcasting and Communications Equipment, compliant with: Article 58-2 of Radio Waves Act, Clause 3EtherNet/IPODVA conformance tested to EtherNet/IP specifications.Publication 1732E-WD001G-EN-P - April 2020 | Supersedes Publication 1732E-WD001F-EN-P - April 2017Copyright © 2020 Rockwell Automation, Inc. All rights reserved. Printed in Singapore.Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752, İçerenköy, İstanbul, Tel:+90(216)5698400 EEE Yönetmeliğine UygundurPN-562273 Allen-Bradley, ArmorBlock, expanding human possibility, FactoryTalk, Rockwell Automation and TechConnect are trademarks of Rockwell Automation,Inc.EtherNet/IP is a trademark of ODVA, Inc.Trademarks not belonging to Rockwell Automation are property of their respective companies.Waste Electrical and Electronic Equipment (WEEE)Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec .At the end of life, this equipment should be collected separately from any unsorted municipal waste.Rockwell Automation SupportUse these resources to access support information.Documentation FeedbackYour comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback .Technical Support CenterFind help with how-to videos, FAQs, chat, user forums, and product notification updates.rok.auto/support KnowledgebaseAccess Knowledgebase articles.rok.auto/knowledgebase Local Technical Support Phone NumbersLocate the telephone number for your country.rok.auto/phonesupport Literature LibraryFind installation instructions, manuals, brochures, and technical data publications.rok.auto/literature Product Compatibility and Download Center (PCDC)Download firmware, associated files (such as AOP, EDS, and DTM), and access product release notes.rok.auto/pcdc。

+期末Module+2考点复习+课件+2022-2023学年外研版八年级英语下册

•I've stop trying now. •stop doing 停止正在做的事情 •stop to do 停下来去做另一件事 •The first prize is only the book called Around the World in 80 Days! •called被叫做
fifteen-year-old为复合形容词，“数词-名词单数-形容词”。只能放在名词前作定语。我们将有一个3天的假期。 We'll have a three-day holiday.
(n.) 方式
English!
1. 做某事的方式 the way to do 2. 用这种方式 in this way
想念
女士；老师
错过
未击中
看图猜Miss的1几. 我个想念意你思，王老师
They have friends all over the world, but they (v.) 惦念；想 also miss their friends in 念；怀念
9 Can you tell me the way to the National Stadium?
(n.) 路线
1. 去……的路 the way to +地点. 2. 在某人去……的路上
on one’s way to 3. 在路上 on the way
Watching films and
listening to songs are great ways to learn
●This language is different from English in many ways, ●and they find it hard to spell and pronounce the words.

IC200ALG620 16位RTD模块商品说明书

250VAC continuous; 1500VAC for 1 minute
Not applicable 50VDC
LED indicators
OK LED: Green indicates backplane power is present. Amber indicates a module fault.
Point
A11
ห้องสมุดไป่ตู้
In (-) 3
B11
No connection
A12
Return 3
B12
Shield Termination
Point
A13
Source 4
B13
No connection
A14
In (+) 4
B14
Shield Termination
Point
A15
In (-) 4
B15
No connection
Connection
A1
Source 1
B1
No connection
A2
In (+) 1
B2
Shield Termination
Point
A3
In (-) 1
B3
No connection
A4
Return 1
B4
Shield Termination
Point
A5
Source 2
B5
No connection
▪ Selectable resistance measurements in tenths of ohms, tenths
of degrees Fahrenheit, or tenths of degrees Celsius

UTC E-2WIRE 两线模块安装和使用说明书

E-2WIRE Analog Class A/B Two-Wire Module Installation SheetOperationThe E-2WIRE module is designed to interface between conventional two-wire smoke detectors and a control panel. It monitors the circuit and smoke detectors and signals the control panel of any trouble or alarm conditions. The module also regulates and supervises the 24 VDC input power.The module is configured from the factory to operate as a two-wire alarm device that does not require alarm verification. It can be configured for two-wire alarm verified operation through front panel programming or the configuration utility. When using the alarm verification feature of the control panel, do not mix normally open contact initiating devices with two-wire conventional smoke detectors.The module recognizes the CleanMe signal from detectors that support this feature.The module device address is set using the two rotary switches located on the front of the module. One device address is required.The device can be set for Class B or Class A operation using the slide switch located on the front of the module.Caution:This module cannot be used on a device loop with isolator modules or isolator bases.Slide switch operationThe following slide switch settings determine the operation of the module. Setting the initial slide switch position is generally performed during module installation. This setting can be changed while the system is operating, but the change must be confirmed through front panel programming.Table 1: Slide switch operationSetting Operation Device type description1 Class B Class B 2-wire smoke non-verified:Configures the module to monitor two-wireconventional smoke detectors (that do notrequire alarm verification) and normallyopen contact initiating devices on a Class Bcircuit.2 Not used3 Class A Class A 2-wire smoke non-verified:Configures the module to monitor two-wireconventional smoke detectors (that do notrequire alarm verification) and normallyopen contact initiating devices on a Class Acircuit. Note:Additional device types are available through front panel programming or the configuration utility. Refer to applicable control panel technical reference manual.Figure 1: Slide switchLED operationThe module provides a bicolor LED that shows its status. Normal: Green LED flashesAlarm/active: Red LED flashesInstallationWARNING:This module will not operate without electrical power. As fires frequently cause power interruption, you should discuss further safeguards with your local fire protection specialist.Note:The module is shipped from the factory as an assembled unit; it contains no user-serviceable parts and should not be disassembled.To install the module:1. Verify that all field wiring is free of opens, shorts, andground faults.2. Make all wiring connections as shown in “Wiring.”3. Set the module address as follows:Use a screwdriver to adjust the two rotary switches on the front of the module. Set the TENS rotary switch (0 through12) for the 10s and 100s digit and the ONES rotary switchfor the 0 through 9 digit. For example: device address 21, set TENS rotary switch to 2 and set the ONES rotaryswitch to 1.Refer to “Specifications” for available address numbers. 4. Set slide switch P1 to appropriate setting. Refer to“Operation.”© 2013 UTC Fire & Security. All rights reserved. 1 / 4 P/N 3101192 • REV 03 • REB 25JAN132 / 4 P/N 3101192 • REV 03 • REB 25JAN135. Mount the module on the electrical box using screwsFigure 3: Module installationWiringWire in accordance with NFPA 72 and CAN/ULC-S524. Be sure to observe the polarity of the wires as shown in Figure 4.Figure 4: Module wiringinitiating deviceFromprevious deviceTo next device From control panel (notresettable) SLC out (+)SLC out 24 VNotes[1] Maximum 25 Ω resistance per wire[2] Maximum 12 AWG (2.5 sq. mm) wire; minimum 18 AWG (0.75 mm 2) wire [3] Refer to the control panel technical reference manual for wiring specifications [4] Maximum 23.8 VDC at 35 mASpecificationsCommunication line voltage Maximum 20.6 V peak-to-peak CurrentStandby Activated 350 μA 350 μAGround fault impedance 5 kΩControl panel input power (notresettable)12.4 to 28.3 VDC Smoke power currentStandby Alarm 17 mA 58 mASmoke detector current 3 mA UL compatibility ID 0.0 Operating environmentTemperature Humidity 32 to 120°F (0 to 49°C)0 to 93% RH, noncondensing at 90°F (32°C)Storage temperature range –4 to 140°F (–20 to 60°C) Compatible electrical boxes North American 4 inch square ×2-1/2 in. (64 mm) deep 2 gang boxStandard 4 in. square box 1-1/2 in.(38 mm) deepWire size 12, 14, 16, or 18 AWG wire (2.5, 1.5,1.0, or 0.75 mm2) (Sizes 16 and 18AWG are preferred)Device address 01 to 64 (64 point control panel)01 to 127 (127 point control panel) Initiating device circuit (IDC)EOL resistor value Max. circuit resistance Max. circuit capacitance 4.7 kΩ, (P/N: EOL-4.7) 50 Ω (25 Ω per wire) 0.1 μFP/N 3101192 • REV 03 • REB 25JAN13 3 / 44 / 4 P/N 3101192 • REV 03 • REB 25JAN13。

高考英语一轮复习Module2TheRenaissance课件外研版选修

单元知识·短篇串记 ////////////////////// 短文中黑体部分为本单元核心知识点，请按要求补全短文，并背诵体会黑体部分用法。 I took part in ①_a competition on behalf of our school.I was believed ②__t_o_w__in__ (win) the game, but not ③__h_a_v_i_n_g_a_d_a_p_t_ed___ (adapt) to the game as soon as possible, I failed.I ④__w_a_s_b_l_a_m_e_d__ (blame) for the failure.I was ⑤_e_x_t_re_m__e_ly_ (extreme) discouraged.To be honest, I was at a loss ⑥w__h_a_t to do
Ⅱ.写作词汇，记其形 1．_a_p_p_ea_l_ to the world 2．get a bit _d_u_ll_ at times 3．_i_n_s_p_ir_e_ him with courage 4．avoid _l_o_ss_ of time 5．_se_e_k_ his lawyer's advice
__古__时__制__造__的__，__古__董__的______ ___榨__出__；__挤__出__；__压__出__(_液__体__)________ __代__替__物__；__代__替__品_______ __秘__密__的__，__机__密__的____ __流__传__；__传__播_____
搜寻；搜索
⑤hunt
寻找；搜索
⑥find
寻找；找寻
2．不一样的“责备”动词荟萃

外研版高中英语必修三Module2知识点详解与同步练习(含答案)

考点分布备考指南1.重点单词如measure, position, figure的识记、理解、固定搭配。

词汇和短语的理解和记忆不是孤立的，需要结合具体的句子和语境进行准确理解，掌握其基本用法和固定搭配。

同时要对所学单词和短语进行多方面的应用，及时复习巩固。

2.词性转化、固定搭配在语法填空、短文改错中的考查。

3.重点短语如up to, be close to, make efforts等的理解及应用。

hunger n ['hʌŋɡə]饥饿income n ['inkʌm] 收入poverty n ['pɔvəti] 贫穷human n ['hju:mən]（与动物等对比的）人development n [di'veləpmənt]发展index n ['indeks] 指数measure vt ['meʒə] 测定；测量；评估goal n [ɡəul]目标expectancy n [ik'spektənsi] 预期数额position n [pəˈzɪʃn] 位置educate vt ['edju:keit] 教育；培养；训练figure n ['fiɡə] 数字household n ['haushəuld] 一家人；家庭homeless adj ['həumlis] 无家可归的charity n ['tʃærəti] 慈善团体crowded adj ['kraudid] 拥挤的freeway n ['fri:wei] 高速公路inhabitant n [in'hæbitənt] 居民similarity n [,simi'læriti] 类似；相似unfortunate adj [,ʌn'fɔ:tʃənət] 不幸的；遗憾的location n [ləu'keiʃən] 位置；所在地tourism n ['tuərizəm] 旅游业transport n [træns'pɔ:t;] 交通工具industrial adj [in'dʌstriəl] 工业的polluted adj [pə'lju:tid] 受到污染的smart adj [smɑ:t]漂亮的；整洁的；时髦的vast adj [vɑ:st,]巨大的；庞大的；浩瀚的entertainment n [,entə'teinmənt] 娱乐exchange n [iks'tʃeindʒ] 交换M2短语专题解读知识清单单词和短语必修三M2M2单词表at the top of 在……顶端at the bottom of 在……底部make effort 努力be connected with 与……有联系be close to 接近；靠近项目单词及其词性变化（语法填空必备）重点单词1.income n.收入 2.measure vt. 测定；测量；评估3.position n. 位置4.figure n. 数字5.homeless adj. 无家可归的6.hunger n.饥饿→hungry adj.饥饿的7.poverty n.贫穷→poor adj.贫穷的8.development n.发展→develop v.发展→developin g adj.发展中的→developed adj.发达的cate vt.教育；培养；训练→education n.教育10.crowded adj.拥挤的→crowd n.人群11.similarity n.类似；相似→similar adj.相似的→similarly adv.相似地；同样地12.unfortunate adj.不幸的；遗憾的→unfortunately adv.不幸地→fortunate adj.幸运的→fortunately adv.幸运地13.tourism n.旅游业→tour v.& n.旅游；游览14.transport n.交通工具→transportation n.交通；运输15.industrial adj.工业的→industry n.工业16.polluted adj.受到污染的→pollute v.污染→pollution n.污染17.entertainment n.娱乐→entertain vt.使欢乐→entertaining adj.使人愉快的18.location n.位置；所在地→locate vt.使坐落于→located adj.位于重点短语1.up to达到；忙于；胜任；由……决定 2.at the top/bottom of在……顶端/底部3.make sure 确定；弄明白 4.make progress 取得进步5.make efforts 努力6.in particular 尤其；特别7.be connected with 与……有联系；与……有关8.be close to 接近；靠近9.such as 像，诸如10.as a result 因此，结果单元知识预览重点单词短语精讲1.measure v.测定；测量；评估；有……长(或宽、高等) n.尺寸；措施[教材原句]What does the Human Development Index measure?人类发展指数测定的是什么？be measured by/in用……来衡量make ... to one's measure 按某人的尺寸做……take measures to do sth. 采取措施做某事[例句研读]①To welcome the school anniversary, our school has made new suits to our measure.为迎接校庆，学校为我们定做了新西装。

外研版初中英语七年级下册(WY)模块测试题 Module 2 检测题1

Module2检测题Ⅰ．翻译下列短语1. 加入舞蹈俱乐部_______2. 与…相处得好_______3. 说汉语_______4. 加入游泳俱乐部___________5. 在某方面帮助某人__________Ⅱ．根据读音选词题.1.I want to join a music ________/ klʌb/.A. comeB. clubC. climbD. call2.Can you _______________/faind / the kite ?A. fruitB. friendC. findD. food3.She can play the _____________ /gItɑ:/ well.A. greatB. greenC. guitarD. game4.May I learn Chinese history _______/wið/ my friend?A. whichB. wishC. withD. watch5.He can speak a ____________ /'lItl/ French.A. listenB. letterC. littleD. listⅢ．单项选择1.The boy’s sister can play the trumpet very____. And his handwriting is very __A. good, well B．well, good C．nice, well D．bad, well2.Can you help me ________ my English? Of course.A．with B．of C．learning D．about 3.—You play the violin very well. —___________.A．Don’t say that B．Thank you.C．OK D．No, my English isn’t good.4. Bob can play ________ tennis but can’t play ________ violin. A．the, the B./, / C．the, / D．/, the5. Liza ______English very well，______she doesn’t know Chinese.A. speaks; butB. talks; butC. speaks ;andD. talks; and6. Miss Read is good ______music．She can be good ____ children in the music club.A．at, at B．with, with C．at, with D．with, at 7.The young ________ plays the ________ very well.A．pianist, piano B．piano, pianist C．pianist, pianist D．piano, piano8.—Can you speak French ? —Yes, but only ________.A． a little B． little C． a lot D．lot9.What can you do, Lin Tao? ________.A．I like sports B．I want to join the music club C．I am well D．I can do Chinese Kung Fu10.Maybe you can ________ our school concert.A． in B．be in C. for D．be at 11.—Hello！________？—37624598A．Can I help you B．What can I do for you C．May I know your phone number D．Can you sing12.He can ______ , so he wants to join the ________ clubA. swims swimB. swims swimingC. swiming swim D swim swiming.13.--- _______ your friend play the guitar? Yes, he ______.A. Do; doB.Is; isC. Can; canD. Can; can’t14.Are you good ______ with you brother?A. forB. atC. withD. to15.They are talking ________ my parents _______ my study.A. with toB. to withC. with aboutD. about with16.After school, I had a long with my teacher about my study.A. talkB. wordC. speechD. story17.Can he it in English?A. speakB. speaksC. sayD. talk18.---- Can you sing dance ?---- I can sing.A. butB. orC. andD. then19.---- do you join the sports club?---- Because I like playing sports very much.A. WhatB. WhereC. HowD. Why20.---- .---- Yes, please. I want to join the dancing club.A. What club do you want to join?B. Can I help you?C. What do you want to do ?D. Do you want to join our club?Ⅳ.完形填空One day John and Bill went fishing. John took his 1 Black with him on the river bank (岸). When the dog saw a bird, he would run 2 it and try to 3 it. "All the fish are afraid and 4 away when they hear Black ," said Bill. "Be quiet, Black," John shouted at the dog. Black did not listen to him."Shall we go now, Bill." asked John, "I shall not bring Black here 6 ." "Wait," said Bill, "a fish is biting (咬) at my line.""Be careful!" shouted John. But it was too 7 . The boy fell into the water. "Help! Help!" Bill shouted. But John couldn't swim, either. 8 Black came out. He jumped intothe water and 9 the boy onto the bank. He 10 his life.1. A. fish B. dog C. cat D. friend2. A. into B. onto C. away D. after3. A. smell B. play C. catch D. shout4. A. walk B. swim C. fly D. run5. A. And B. Or C. But D. So6. A. too B. either C. again D. also7. A. late B. early C. fast D. safe8. A. So B. At once C. But D. Just then9. A. saw B. tried to help C. pulled D. put10. A. gave B. made C. helped D. saved Ⅴ．阅读理解AMrs. Mills goes to London, She doesn't know London well and she can't find her way. Suddenly（突然）, she sees a man at a bus stop. "I can ask him the way." She says to herself. "Ee the way to King Street, please?" The man smiles pleasantly. He doesn't understand English. He speaks German. He is a tourist（游客）. He puts his hand intohis pocket, and takes out a phrase-book. He opens the book and finds a phrase. He reads the phrase slowly, "I am sorry." he says, "I don't speak English."1.Mrs Mills goes to _____.A. FranceB. EnglandC. China2.Mrs Mills doesn't know the _____ very well.A. wayB. timeC. people3.Mrs Mills has to ask _____ the way.A. an AmericanB. a GermanC. a Japanese4.The man is there to _____.A. see a friendB. learn EnglishC. visit the city5.Which of the following is true?A. The man can't speak English well.B. The man tells Mrs. Mills the way.C. The man finds the way in the phrase-book for Mrs. Mills.B6．You want to know something about Japan, you can watch________ A．Weather report B．China’sC．Around the world D．Animal world7．You are a football fan. You may watch TV at___________. A．19:00 on Channel 2 B．19:40Channel 1C．20:20Channel 2 D．21:15Channel8．How long does the TV play “sisters” last(持续)？A．30 minutes B．50 minutes C．90 minutes D．120 minutes9．You can watch _______if you want to learn English. A．English news B．English classroom C．English for today D．A、B and C10．Children often like to watch_________.A．Cartoon network B．NewsC．Weather report D．SportsCTwo men are walking in the park. One is Mr. Brown, a worker, the other is Mr. Black. Mr. Brown is going to a chair. It is beside the road. Mr. Black is after him. Mr. Brown finds Mr. Black. Now Mr. Black begins to walk faster(更快). Because he wants to get to the chair before Mr. Black. Now Mr. Black begins to walk faster because he also wants to get to the chair first. Then they both run .Mr. Black runs faster than (比) Mr. Brown. So he gets to the chair first and sits down on it. Mr. Brown runs after Mr. Black. When he gets to the chair. He sees Mr. Black sitting on it. He is sorry to show a notice(通知)with the words “Wet Paint(油漆未干)”to Mr. Black. Now Mr. Black knows why Mr. Brown is going to the chair.11. Where are Mr. Brown and Mr. Black?A．In the garden B． On the chairC． In the park D．Beside the road12．What are they doing? They are________A． talking B．walking to the chair C．holding a notice D．sitting on a chair13._________is after _________at firstA．Mr. Black ,Mr. Brown B．The worker, Mr. BrownC．Mr. Brown ,Mr. Black D．Mr. Brown The worker14．________get to chair first.A．The worker B．Mr. Brown C．Mr. Black D．A strange 15．Mr. Brown goes to the chair because__________.A．he wants to sit thereB．it is his chairC．he wants to talk to Mr. Black on the chairD．he wants to tell people ”Wet Paint”Ⅵ．选词并用适当形式填空.Judy likes _______, so she wants ________ the music club. Now she ________good with the other students in the music club. But she isn’t good at _______ basketball. Tom says he can _______ her.Ⅶ．改写句子.1.She can drive the car. （变一般疑问句并做否定回答）_____ she _____ the car? No, she ______ .2.He wants to join the art club. (划线部分提问)_________ ________ _________ he want to join?3.Lucy’s brother can sing and dance. (划线部分提问)________ _________ Lucy’s brother _____ ?4.He often helps Gina with her math. (同义句)He often________ Gina ________ math.Ⅷ．完成句子.1．你想参加什么样的俱乐部？______ _______ do you want _______ ________?2．他想加入艺术俱乐部因为他会拉小提琴.He wants _______ _______ the art club because he ________ ________ _______ violin.2．琳达经常帮妈妈做家务.Linda often _______her mother _______ housework .4. 你会下棋吗？不会，但是我爸爸会.Can you ________ _________? No, I ________, but my father __________.5.如果你喜欢，你可以加入我们的校艺术节.If you like, you can _____ _____ our school festival.IX书面表达以下是某俱乐部招募会员的表格，请根据表格的情况介绍一下你的朋友王强.参考答案I. 1.join the Dance Club 2.get on well with 3.speak Chinese4.join the swimming club5.help…withII. 1.club 2.draw 3.guitar 4.address 5.littleIII.1.B 2.A 3.B 4.D 5.A 6.C 7.A 8.A 9.D 10.B 11.C 12.D 13.C 14.C 15.C 16.A 17.C 18.B 19.D 20.DⅣ1. B2. D3. C4. B5. C6. C7. A8. D9. C 10. DV.BABCA CCBDA CBADDVI．singing to join is playing helpVII．1.Can drive can’t2.What club does3.What can do4.helps learnVIII.1.What club to join2.to join can play the3.helps with/do4. play chess can’t can5.be inIX 略。

十六通道R2000模块天线切换指令说明

set_antenna_group指令数据包：
0xA0
0x04
0x6C
参数说明
GroupID
组号
0x第二组的八口工作
读写器返回数据包：
0xA0
0x04
0x6C
参数说明
SuccessCode
10
设置工作组成功
其他值
设置工作组失败
4.读取当前正在工作的工作组指令格式如下：
get_antenna_group指令数据包：
0xA0
0x03
0x6D
读写器返回数据包：
0xA0
0x04
0x6D
参数说明
GroupID
组号
0x00
当前第一组的八口正在工作
0x01
当前第二组的八口正在工作
其他值
获取当前工作组失败
十六口读写器天线切换指令说明：
1.十六口读写器可以看成是两组八口的读写器group1和group2在一起组成；
2.读写器上电后默认group1在工作，切换group1的八口天线和普通的八通道模块切换天线指令一样；
3.因此，主要的工作就是切换group1和group2，切换这两个工作组的指令格式如下：

多路丝路扩展模块D7039安装指南说明书

NoticesUse these instructions to install the D7039 Multiplex Expansion Module in a fire system supervised by aD7024 Fire Alarm Control Panel (FACP).Install, test, and maintain the D7039 according to these instructions, NFPA 72, local codes, and the Authority Having Jurisdiction (AHJ).1.0DescriptionThe D7039 (Figure 1) connects directly to the FACP for either two Class B multiplex buses or one Class Amultiplex bus that allows up to 247 remote points.2.0Installation1.If the D7024 is already installed in an enclosure, remove it.2.Place the FACP on a flat surface with the component side facing up (Item 2 in Figure 2).3.Insert the four plastic standoffs in the mounting holes (Item 3 in Figure 2) without bending or flexing the FACP.4.Align the standoff tabs so they do not touch the module components.5.Firmly press the standoffs into the board, allowing the ears to expand out.6.Mount the D7039 on the standoffs, ensuring the FACP connector pins (Item 4 in Figure 2) are properly aligned.7.Install the FACP in the enclosure.e the mounting screw (Item 5 in Figure 2) to secure the D7039’s ground wire (Item 6 in Figure 2) to the FACP.9.Mount the D7039 I/O Module (Item 1 in Figure 3) in the FACP enclosure (Item 2 in Figure 3) using the mountingholes in the enclosure (Item 3 in Figure 3).10.Connect the yellow and green earth ground wire from the I/O module to the earth ground terminal on theFACP control board (Item 4 in Figure 3).3.0Wiring1.Connect the D7039 multiplex loop using up to 3800 ft (1170 m) of 18 AWG (1.0 mm2) or 5950 ft (1810 m) of16 AWG (1.5 mm2) wire (Figure 4). Do not use shielded wire.Y ou can configure the D7039 with a single fault tolerant Class “A” loop or as a pair of supervised Class “B”loops. When configured as a Class “A” loop and installed on a D7024 Control Panel before Lot #100, the D7039 implements a Style 4.5 signaling line circuit (SLC). When installed on a D7024 Control Panel Lot #100 or later, the D7039 implements Style 6 SLC. Refer to the D7024 Operation and Installation Guide (P/N: 31499) for programming.When configured as a Class “B” loop and installed on a D7024 Control Panel before Lot #100, the D7039 implements a Style 3.5 SLC. When installed on a D7024 Control Panel Lot #100 or later, the D7039implements a Style 4 SLC. Refer to the D7024 Operation and Installation Guide (P/N: 31499) for programming.2.Measure loop resistance by shorting the end of the farthest device in Class “B” (Figure 5) or shorting the returnwire in Class “A” (Figure 6) and reading the total resistance of all wires associated with the loop.3.Ensure the loop is disconnected from the D7039 Module.4.0SpecificationsNotes。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

Superdome 16-Way: Backplane
Cell Slots 4-7 not used
Only one XBC pair BPB #2 not used
Power Subsystem
• For the Backplane Power Board
N=1 HBPB N+1=2 HBPB’s (slot 2 is not Used)
HUCB Differences
HUCB switch to identify the cabinet type.
Type 0 is Superdome Type 1 is Superdome 16-Way
Superdome 16-Way Firmware
Same Firmware as Superdome 32-Way.
To prevent possible loading of cells in slots four through seven, the backplane is only partially assembled (on halfdome and SX1000).
Superdome 16-Way to 32-Way
Dip switch on HUCB tells firmware what model it is, and disables cells 4-7 on the Domelite.
Diagnostics and Troubleshooting
Sight
Support Sound
Tools Magic Information
UPGRADE Steps
1) 2) 3) 4) 5) 6) 7) New backplane (except for SX2000) Add cells Set HUCB switch Set Model type with ID command (requires sskey) Add BPB (except SX2000) Add BPSs Install IOX?
• For the Bulk Power Supplies N=3 BPS’s N+1=4 BPS’s • Customer may use (purchase) N+3= 6 BPS’s
Mechanical Assemblies
An Air Flow Blocker is added to the channel unpopulated by the backplane power board.
• • • • • • •
Minimum-cost entry level version of Superdome Functionally the same as a Superdome with 4 cells Standard Single Superdome cabinet 0 only All Superdome N+1 redundancy Supports all Superdome cell types Halfdome and SX1000 use a special backplane SX2000 uses same backplane as SX2000 32/64way
Superdome 16-Way 16-
Superdome 32/64-Way 32/64-
Same tools and skills as Superdorations
• A Superdome 16-Way system can have from 1 to 4 cells • Cells must be in slots 0 through 3 • Superdome cabinet number 0 must be used
Module 8 – Superdome 16-Way
Superdome 16-Way
4 Cell Boards With 4 CPUs
4 Bulk Power Supplies 2 Backplane Power Boards
Upgradeable
What is Superdome 16-Way?