流程图 雅思作文
雅思小作文流程图类题目范文及解析
雅思小作文流程图类题目范文及解析雅思小作文流程图类题目范文及解析,一起来学习一下吧，下面我就和大家共享，来观赏一下吧。
雅思小作文流程图类题目范文及解析雅思小作文流程图类题目范文及解析为大家带来雅思小作文当中一类较有难度的图表——流程图类的小作文的范文以及解析。
流程图顾名思义就是对某一有时间和步骤先后挨次的行为进行步骤的拆解，并配上相应的文字和解说而生成的图表。
我们在处理流程图类图表作文是应当怎么写，请看下文。
上图来自网络主题：家居设计题型：流程图The diagrams below show some principles of house design for cool and for warm climates.满分范文：The diagrams show how house designs differ according to climate.这些图表显示房子的设计因气候而不同。
The most noticeable difference between houses designed for cool and warm climates is in the shape of the roof. The designs also differ with regard to the windows and the use of insulation.为凉快和暖和气候设计的房子之间最明显的区分是屋顶的外形。
在窗户和保温材料的使用方面，设计也有所不同。
We can see that the cool climate house has a high-angled roof, which allows sunlight to enter through the window. By contrast, the roof of the warm climate house has a peak in the middle and roof overhangs to shade the windows. Insulation and thermal building materials are used in cool climates to reduce heat loss, whereas insulation and reflective materials are used to keep the heat out in warm climates.我们可以看到凉快的气候房子有一个高角度的屋顶，它允许阳光通过窗户进入。
雅思流程图小作文
雅思流程图小作文The given diagram illustrates the process of how chocolate is produced, from the cacao bean to the final chocolate bar. Overall, it can be seen that there are several stages involved in the production of chocolate.To begin with, the process starts with the harvesting of cacao beans. These beans are then transported to the factory, where they undergo a thorough inspection to ensure that they are of high quality. Once the beans have been approved, they are then roasted at a high temperature to bring out the rich flavor of the cacao.Following this, the roasted beans are then cracked open to reveal the cacao nibs inside. These nibs are then ground into a thick, smooth paste known as chocolate liquor. It is important to note that this chocolate liquor contains both cocoa solids and cocoa butter.Next, the chocolate liquor is further processed toseparate the cocoa solids from the cocoa butter. This is achieved through a pressing process, which results in the creation of two separate products: cocoa powder and cocoa butter. The cocoa powder is then used in the production of various chocolate products, while the cocoa butter is utilized in the creation of chocolate bars and other confectionery items.Finally, the cocoa powder and cocoa butter are combined in precise proportions to create the desired type of chocolate. The mixture is then heated and stirred to ensure that the ingredients are thoroughly blended. Once the chocolate has reached the desired consistency, it is poured into molds and allowed to cool and solidify.In conclusion, the production of chocolate is a complex process that involves several stages, from the harvesting of cacao beans to the creation of the final chocolate bar. Each stage plays a crucial role in ensuring that the chocolate produced is of the highest quality. Overall, the process of chocolate production is a fascinating and intricate one that requires precision and expertise.。
英语雅思流程图范文
英语雅思流程图范文Title: The Production Process of a Mobile Phone.The diagram illustrates the production process of a mobile phone, which begins with the concept stage and ends with the final assembly and testing. This entire processcan be divided into several key stages, each with its ownset of steps.The first stage is Research and Development (R&D),where the concept of the phone is born. Engineers and designers work together to create a prototype based on market research and consumer demand. This prototype is then tested for functionality, durability, and user-friendliness. Once the prototype meets the required standards, it moveson to the next stage.The second stage is Component Manufacturing. Here, various components such as the screen, battery, camera, and chipset are produced. Each component goes through its ownproduction process, which involves raw material procurement, processing, and quality control. For example, the screen is manufactured using special glass and coated with various layers to enhance visibility and touch sensitivity. The chipset, which is the brain of the phone, is produced using advanced semiconductor technology.The third stage is Assembly. In this stage, all the components are brought together and assembled into a complete phone. This process is highly automated and precise, as each component needs to be placed in the exact right position. The assembly line is equipped with robots and sensors to ensure accuracy and efficiency.Once the phone is assembled, it moves on to the next stage, which is Testing. Here, the phones are put through a series of rigorous tests to ensure they meet the required standards. These tests include functional testing,durability testing, and compatibility testing. Only phones that pass all the tests are considered ready for sale.The final stage is Packaging and Shipping. In thisstage, the phones are packaged in boxes or protectivecovers and shipped to distribution centers around the world. The packaging is designed to protect the phones duringtransit and ensure they arrive in perfect condition.Throughout the entire production process, qualitycontrol is a constant factor. At each stage, quality inspectors check the products to ensure they meet the required standards. This ensures that only the best quality phones reach the consumer.In conclusion, the production of a mobile phone is a complex process that involves multiple stages and steps. It requires meticulous planning and execution to ensure that each phone is produced to the highest standards. Thediagram illustrates this process clearly, showing the flow from concept to final product.。
雅思小作文范文--装置图 流程图 表格
小作文流程图The given graph indicates the procedures of glass bottle recycle by three main stages.According to the table, various glass bottles are gathered in the collecting site and then transported to the cleaning station at the very beginning. Then it comes to the second stage where the bottles are washed by the high pressured water, after which they are categorized into Brown, Green as well as clear groups based on their color. After that, bottles are delivered to the recycling plant where the prepared bottles are burned in furnace with high temperature into liquid glass for recycle. Next, the recycled liquid glass along with new liquid glass is shaped into bottles again through glass moulds. Finally, the newly produced glass bottles are launched into the customer supermarket, till this point, the process of glass recycle is finished completely.In summary, it is obvious that stage 2 is the most crucial and complex one during the whole recycling process.装置图The given table reveals how the water collecting set functions to gather water in the wild.At the very beginning, in order to prepare the set, it is necessary to find a hole on the ground which can receive sufficient sunshine and abound with plenty of green plants. Then a container used to collect water is placed in the center of the hole, and the hole is covered by a plastic sheet, fixed by stones on the edge. However, it is recommended to place a suitable stone in the middle of the sheet to ensure its lower position exactly above the water container.When the sun shines above the green plants, plants will generate water vapor owing to the photosynthesis, and the water vapor is condensed into water drops on the plastic sheet. Under the effect of gravity, the water drops increasingly gather in the lower point and fall into the container placed under the plastic sheet.组合图-C6T1The curve graph reveals the international water consumption during the entire 20th century, and water usage in Brazil as well as Congo in 2000 is illustrated in the second chart.According to the line chart, the global water used in agriculture(500 km³) considerably outweighed that in industry (50 km³) and household(20 km³) section were, and they lead a similarly slight increase in the first 50 years. However, since 1950, the agricultural water consumption witnessed a constantly dramatic rise, reaching the peak at exactly 3000 km³in 2000. On the other hand, industrial and domestic water usage rose moderately in the second half century, peaking at around 1300 and 400 km³respectively. In the second chart, we can clearly find that the water use of each person(359 m³) of Brazil in 2000, which possessed 176 million inhabitants and 26,500㎡irrigating lands, intensively surpassed that of Congo (8 m³), with only 5.2 million dwellers and 100㎡irrigating lands.In summary, the water worldwide was mainly consumed by agriculture field during the given 100 years, and Brazil’s average individual substantially overweighed that of Congo in 2000.柱状图-C7T3A glance at this bar chart reveals the changing average prices of house in five cities （New York, Madrid, Tokyo, Frankfurt and London）between 1990 and 2002 in comparison of that in 1989.According to the graph, during the first stage, from 1990 to 1995, the average house prices of New York, Tokyo and London suffered a dramatic fall compared with that 1989, with the percentage decreasing more than 5%. On the other hand, the housing prices in Madrid and Frankfurt experienced a slight increase less than 3%.Between 1996 and 2002, the average house prices of London and New York rose dramatically, especially London with a 12% increase which represented the largest ascent. Madrid and Frankfurt witnessed a slight increase (4% and 2% respectively). Oppositely, the house price in Tokyo still decreased (exactly 5%), even though it recovered a little than the first stage (8%).In conclusion, the average house prices in the given cities from 1990 to 2002 all increased correspondingly except Tokyo compared with 1989.The line curve illustrates the changes of fish and meat consumption in a European country during the year 1979 to 2004.装置图As can be seen from the chart, the consumption of beef stood the largest in 1979 with the data of around 220 grams for each person every week. However, after a fluctuation between 1979 and 1988, it dropped dramatically to the bottom at approximately 100 grams in 2004. Similarly, the lamb also declined constantly in the same period, ending up with about 60 grams in 2004. However, the figure of chicken experienced a significant rise from 140 grams in 1979 to over 250 grams in around 2002, which leveled off to exactly 250 grams in the end. As to the fish consumption, the figure maintained a long-term slight decrease tendency in the whole stage, remaining the least popular food option among the four.In conclusion, the chicken consumption witnessed a staggering increasing whilst other meats decreased to a certain degree in the given period.表格图-C5T4The graph describes data about the subway systems in London, Paris, Tokyo, Washington DC, Kyoto and Los Angeles.According to the table, London railway possesses the longest history among the six cities, which was opened in 19th century (1863), while that of Los Angeles was opened in the 21st century (2001), also the latest one. The other four underground systems were all built in 20 century. In terms of kilometers of route, London subway holds the first place with the length of 394km. The length of subway in Paris, Tokyo as well as Washington DC is between 100 and 200 kilometers. However, that of Kyoto and Los Angeles isbelow 100 kilometers, with Kyoto theshortest (only 11 kilometers). When it comes to the annual passenger transporting capability, Tokyo and Parisexceeds 1000 million, especially Tokyo the largest (1927 million), while Los Angeles and Kyoto transport fewer than 100 million per year, 50 and 45 million respectively. The number of the rest two cities lies between 100 and 1000 million.In conclusion, London railway ranks the first in terms of opening date and route length whereas Kyoto the least in route length as well as annual passenger transporting.。
雅思流程图范文
雅思流程图范文The diagram illustrates the process of making a cappuccino, from the initial selection of ingredients to the final step of serving the drink.Overall, there are six major steps involved in making a cappuccino. These include gathering the necessary ingredients, grinding the coffee beans, brewing the espresso, frothing the milk, pour the steamed milk into the espresso, and finally serving the cappuccino.To begin with, the coffee beans need to be ground. This can be done by using a coffee grinder, which gradually transforms the beans into a fine powder. Once the grinding process is completed, the coffee grounds are ready to be used.Next, the coffee grounds are prepared for brewing. They are placed into a specialized coffee machine, which has the ability to extract the full flavor and aroma of the beans. The machine heats the water to a high temperature and then runs it through the coffee grounds, producing a concentrated coffee called espresso. Simultaneously, the milk needs to be frothed. This requires pouring cold milk into a metal jug and using a steam wand to introduce hot steam into the milk. As the steam mixes with the milk, it creates a creamy froth on the surface.After this, the espresso is poured into a cup. This forms the base of the cappuccino. Following that, the frothed milk is carefully poured into the cup, starting from a higher point. As the milk is poured, it blends with the espresso, creating a layered effect withthe froth on top.Finally, the cappuccino is ready to be served. It is typically served in a ceramic cup, garnished with a dusting of cocoa powder or cinnamon on top. The cup is then presented to the customer, ready to be enjoyed.In conclusion, making a cappuccino involves a series of steps, including grinding coffee beans, brewing espresso, frothing milk, and serving the final drink. With the right ingredients and equipment, this process can result in a perfectly brewed and visually appealing cappuccino.。
雅思小作文流程图讲解 满文例文
Writing task 1
You should spend about 20 minutes on this task.
The illustrations below show how chocolate is produced.
Summarise the information by selecting and reporting the main features.
【流程图特点之一：介绍过程要使用一般现在 时】
Chocolate comes from the cacao tree, which is grown in parts of South America, Africa and Indonesia. The tree produces large red pods which contain white cocoa beans.
Then the lumps of clay are placed on a metal grid in order to break up the big chunks of clay into much smaller areas, which fall through the metal grid onto a roller, whose motion further segregates the bits of clay. Sand and water are added to make a homogenous mixture, which is then either formed in moulds or cut into brick-shaped pieces by means of a wire cutter.
【开头不能一上来就直接介绍cacao tree，而是通过主题 词chocolate引出，否则显得太唐突】
雅思小作文流程图9分
雅思小作文流程图9分## Mastering the IELTS Process Diagram: A Journey to Band 9 The IELTS Academic Writing Task 1 presents a unique challenge: transforming visual information into a coherent and concise piece of writing. Among the various formats, the process diagram stands out for its intricate portrayal of sequential steps, often leaving test-takers overwhelmed. However, with a strategic approach and diligent practice, achieving a band 9 score in this task becomes an attainable goal. Let's embark on a journey to unravel the secrets of mastering the IELTS process diagram, exploring key strategies and insights that will empower you to excel. Before delving into the intricacies of writing, it's crucial to understand the essence of a process diagram. Unlike static charts or maps, a process diagram illustrates a sequence of actions, often involving transformations, decisions, or stages leading to a final outcome. This dynamic nature demands a writing stylethat captures not only the individual steps but also the flow and interconnectedness between them. Think of it as narrating a story of transformation, guiding the reader through the journey from the initial input to the ultimate result. Your journey to a band 9 score begins with a meticulous analysis of the diagram. Take a moment to observe the starting point, the ending point, and the various steps in between. Identify the key elements involved, including materials, actions, and decision points. Pay close attention to any arrows, labels, or symbols that indicate the direction and nature of the process. This initial observation forms the foundation for your writing, ensuring that you capture all the essential details. With a clear understanding of the process,it's time to craft an introduction that sets the stage for your description. Briefly paraphrase the diagram's title to convey the overall theme or process being depicted. For instance, instead of simply stating "The process of making cheese," you might write, "The diagram illustrates the intricate steps involved in transforming milk into cheese." This approach demonstrates your ability to synthesize information and use synonyms effectively, both of which are highly valued in the IELTS assessment. The main body paragraphs form the heart of your response, where you meticulously describe each stage of the process. Employ a logical flow, typically following the chronological sequence presented in thediagram. Use a variety of transition words and phrases to connect the steps, indicating the progression and relationships between them. For example, you might use words like "initially," "subsequently," "following this," or "as a result" to create a smooth and coherent narrative. While describing each step, focus on the key actions or transformations taking place. Use active voice and precise vocabulary to convey the dynamics of the process. For instance, instead of simply stating "the milk is heated," you might write, "the milk is gradually heated to a specific temperature." This level of detail demonstrates your command of the language and your ability to express nuances effectively. As you progress through the description, be sure to highlight any decision points or alternative pathways within the process. Explain the conditions that lead to different outcomes and the consequences of each choice. This demonstrates your understanding of the complexities involved and your ability to analyze the information critically. Finally, conclude your response with a concise summary of the entire process, reiterating the key stages and the final outcome. You might also mention the significance or purpose of the process, providing a broader context for your description. This concluding paragraph showcases your ability to synthesize information and provide a holistic perspective. Remember, the key to achieving a band 9 score lies not only in accurately describing the process but also in demonstrating a high level of language proficiency and critical thinking. Use a variety of sentence structures, vocabulary, and grammatical constructions to showcase your linguistic dexterity. Analyze the information presented in the diagram and provide insights beyond a mere description of the steps. By combining meticulous observation, clear organization, and sophisticated language use, you can confidently approach the IELTS process diagram and unlock the door to a band 9 score.。
雅思小作文流程图地图概率
雅思小作文流程图地图概率英文回答：Introduction.This flowchart illustrates the process of calculating the probability of an event occurring. The first step is to identify the sample space, which is the set of all possible outcomes. Once the sample space has been identified, the next step is to determine the number of outcomes that are favorable to the event. The final step is to divide the number of favorable outcomes by the total number of outcomes to calculate the probability.Advantages and Disadvantages of Using Flowcharts.Flowcharts are a useful tool for visualizing the steps involved in a process. They can help to identify potential bottlenecks and areas for improvement. However, flowcharts can also be complex and difficult to understand, especiallyfor people who are not familiar with the process being represented.Variations of Flowcharts.There are many different variations of flowcharts, each with its own strengths and weaknesses. Some of the most common types of flowcharts include:Process flowcharts show the steps involved in a process, from start to finish.Data flowcharts show how data is processed and used in a system.Decision flowcharts show the decisions that are made in a process.Applications of Flowcharts.Flowcharts are used in a wide variety of applications, including:Business process mapping.Software development.Quality control.Education.Conclusion.Flowcharts are a powerful tool for visualizing and understanding processes. They can be used to improve efficiency, identify bottlenecks, and communicate complex ideas.中文回答：流程图。
雅思小作文流程图范文（共7篇）
雅思小作文流程图范文(共7篇)雅思,流程图,作文,范文篇一：雅思流程图的写作(含范文深度点评) WRITING TASK 1You should spend about 20 minutes on this task.The illustrations below show how chocolate is produced. Summarise the informaiton by selecting and reporting the main features.Write at least 150 words.【高分范文及深度点评】The diagram shows the stages in the process of making chocolate.【所有的小作文第一句话都要用一般现在时。
流程图必备三个词：process：整个过程, stage：阶段，step：步骤】Chocolate comes from the cacao tree, which is grown in parts of SouthAmerica, Africa and Indonesia.【开头不能冲上来就直接介绍cacao tree，而是通过主题词chocolate引出，否则显得太唐突】【流程图特点之一：介绍过程要使用一般现在时】【流程图特点之二：大量使用定语从句，将有关联的两句话连接。
】【流程图特点之三：大量使用被动语态】The tree produces large red pods which contain white cocoa beans. Firstly,【使用一些表示顺序的连接词】when the pods are ripe,they are harvested, the beans are removed andthey are fermented for several days in large wooden boxes.【三个句子的并列：“句子A，句子B and 句子C”。
雅思写作小作文流程图满分范文
雅思写作⼩作⽂流程图满分范⽂ 流程图写作是雅思常会遇到的⼩作⽂类型之⼀，考⽣可在平时对这⼀类的⼩作⽂进⾏⼀些必要的练习。
下⾯是店铺送给⼤家的两篇雅思写作⼩作⽂流程图满分范⽂，希望对⼤家有所帮助。
雅思写作⼩作⽂流程图满分范⽂⼀ 话题： The diagrams below show how houses can be protected in areas which are prone to flooding. 范⽂ The diagrams compare two different methods of defence for homes which are at risk of being flooded. The key difference between the diagrams is that they show flood protection with and without a stopbank. In either case, the at-risk home is raised on stilts above ground level. The first diagram shows how a stopbank acts as a flood barrier to stop river water from flooding homes. The stopbank is a small mound of land next to the river that is higher than the 100-year flood level, and prevents the river from bursting its banks. Nearby houses can be built on stilts to prevent flooding from rainwater, and a floodgate beneath the stopbank can be opened to allow this ‘ponding’ to drain off into the river. When there is no stopbank, as shown in the second diagram, there will be nothing to stop the river from flooding. In this case, the solution is to put buildings on stilts. The height of the stilts is measured so that the floor of the house is 300mm above the 100-year flood level. This measurement is called the ‘freeboard’. 雅思写作⼩作⽂流程图满分范⽂⼆ 话题： The diagram below shows how solar panels can be used to provide electricity for domestic use. 范⽂ The picture illustrates the process of producing electricity in a home using solar panels. It is clear that there are five distinct stages in this process, beginning with the capture of energy from sunlight. The final two steps show how domestic electricity is connected to the external power supply. At the first stage in the process, solar panels on the roof of a normal house take energy from the sun and convert it into DC current. Next, this current is passed to an inverter, which changes it to AC current and regulates the supply of electricity. At stage three, electricity is supplied to the home from an electrical panel. At the fourth step shown on the diagram, a utility meter in the home is responsible for sending any extra electric power outside the house into the grid. Finally, if the solar panels do not provide enough energy for the household, electricity will flow from the utility grid into the home through the meter.【雅思写作⼩作⽂流程图满分范⽂】。
雅思的流程图作文范例
无忧网上的范例(仅供参考)1.《蚕丝制作》Sample：As is displayed in the first diagram, the life cycle of the silkworm can be categorized into 4 main stages. First, the life of the silkworm starts from eggs propagated by the moth, and it takes 10 days for each egg to become a silkworm larva that feeds on mulberry leaves. Silkworm larva continues to grow in 4 to 6 weeks, then wrapping itself with silk thread to construct a cocoon in the next 3 to 8 weeks.A moth can be produced from the cocoon in 16 days. The life cycle begins again from then on.Focusing on the second diagram, it illustrates the 5 main steps of the procedure of producing silk cloth. Well generated cocoons will be selected firstly. Before the silk thread can be unwound, cocoons have to be boiled in hot water. One cocoon can produce approximately 300 to 900 metres of silk thread. The unwound thread will be dyed afterwards to be weaved into silk cloth.Overall, the two diagrams reveal the stage of producing cocoons in the life cycle of the silkworm can be used to make silk cloth through 5 simple steps.Cambridge IELTS 6 Version:The first diagram shows that there are four main stages in the life of the silk worm.First of all, eggs are produced by the moth and it takes ten days for each egg to become a silkworm larva that feeds on mulberry leaves. This stage lasts for up to six weeks until the larva produces a cocoon of silk thread around itself. After a period of about three weeks, the adult moths eventually emerge from these cocoons and the life cycle begins again.The cocoons are the raw material used for the production of silk cloth. Once selected, they are boiled in water and the threads can be separated in the unwinding stage. Each thread is between 300 and 900 metres long, which means they can be twisted together, dyed and then used to produce cloth in the weaving stage.Overall, the diagrams show that the cocoon stage of the silkworm can be used to produce silk cloth through a very simple process.2. 《户外取水》The chart describes how water is obtained outdoors.According to the figure, the first step of obtaining water outdoors is to find a hole with green plants on its bottom. Next, remove the green plants in the middle and put a container there. Then, cover the hole with a plastic sheet and place two stones on both ends of it to secure its position. A third stone is laid on the middle of the plastic sheet so that the middle part is also the lowest part.When the sun shines on the green plants in the hole, water evaporates from these plants. The vapor rises up and then cools down to form water drops on the plastic sheet. When there is more and more water, it flows along the sheet to accumulate on the lowest part. Finally, water falls down into the container directly under the middle stone.Thus, water is collected successfully through evaporation from green plants.3．《化肥的制作》As is shown in the flow chart, the process of recycling organic waste to produce compost is really a complex one.The whole process can be categorized into five stages. First of all, prepare a plastic container which has four holes for ventilating the air. There is a rule when putting waste into the container, food at the bottom within 15 centimeters high, grass at the middle and newspaper at the top within 15 centimeters high altogether, in order to make a optimum environment for different bacteria reproducing. In the following stage, we can witness nitrogen and water being put into the container. What's worth mentioning is that water is only added in a hot weather. Next, heat the waste and let the bacteria reproduce fastly, with which the organic waste can be decomposed and became garden fertiliser after 6 months. Subsequently, we can carry the compost out and move it to the garden, thus a new recycling can begin.In conclusion, using this way to turn the organic waste into garden fertiliser is environmentally friendly. By enlarging the number or volume of the container, we can dispose more waste at the same time.4. How chocolate is produced?The diagram shows the stages in the process of making chocolate.Chocolate comes from the cacao tree, which is grown in parts of South America, Africa and Indonesia. The tree produces large red pods which contain white cocoa beans. Firstly, when the pods are ripe, they are harvested, the beans are removed and they are fermented for several days in large wooden boxes. During the fermenting process, the beans turn brown.Next, the brown beans are spread in the sun to dry. They are then put in large sacks and transported by train or lorry. After this, the beans are taken to a chocolate factory where they are roasted in an oven at temperatures of between 250 and 350 degree Celsius.After being roasted, the beans are crushed and the outer shell is removed. This part is not needed for making chocolate. Finally, the inner part of the bean is pressed and liquid chocolate is produced.5. Brick manufacturingThe process by which bricks are manufactured for the building industry can be outlined in seven consecutive steps. First the raw material, clay, which was just below the surface of soil in certain clay-rich areas has to be dug up by a digger.Then the lumps of clay are placed on a metal grid in order to break up the big chunks of clay into much smaller areas, which fall through the metal grid onto a roller, whose motion further segregates the bits of clay. Sand and water are added to make a homogenous mixture, which is then either formed in moulds or cut into brick-shaped pieces by means of a wire cutter.Those fresh bricks are then kept in a drying oven for at least 24 and a maximum of 48 hours, several dozens if not hundreds of bricks at a time. The dried bricks are then transferred to a so-called kiln, another type of high temperature oven. First they are kept at a moderate temperature of 200 ℃ -1300 ℃ . This process is followed by cooling down the finished bricks for 48 to 72 hours in a cooling chamber.Once the bricks have cooled down and have become hard, they get packaged and delivered to their final destination, be it a building site or storage.6. Life cycle of the silkworm7. The diagram below shows how the Australian Bureau of Meteorology collects up-to-the-minute information on the weather in order to produce reliable forecasts.8. 黄石公园9. Chewing gum。
雅思小作文范文-流程图
1. The process of brick manufacturing.注意：1. 介绍过程要使用一般现在时2. 使用定语从句将有关联的两句话连接。
3. 大量使用被动语态。
4. 使用一些表示顺序的连接词。
5. 一般不需要写总结。
The flow chart illustrates the production process of bricks usually used in building industry. Generally, seven stages are included, from material exploitation to delivery.Firstly, underground clay is dug up as the raw material by a large digger. Clay lumps are then stacked on a metal grid which serves to break up chunks into much smaller pieces. After falling on a roller, the stuff is further conveyed and mixed with sand and water.In following stage, the well-blended compound is pressed in a mould or cut by a wire cutter, in order to form brick-shaped pieces. During next 24-48 hours, dozens of these fresh bricks are kept in a room, namely drying oven.Once the bricks are dry, the next stage is heating and cooling process. bricks are transferred in a so-called kiln, another type of hotter oven, in which they are burned twice, moderately and highly, in temperature from 200°C-980°C to about 870°C-1300°C. This is followed by depositing heated bricks in a cooling chamber for 2 or 3 days.Finally, cooled hard bricks get packed and delivered by trucks to their destination, a building site.（194）2. The production of steam using a gas cooled nuclear reactor.1. 看懂基本过程和原理，定位流程的起点和终点。
雅思作文电路板生产流程图
雅思作文电路板生产流程图英文回答：Circuit Board Production Process Flowchart: A Comprehensive Overview.Preparation.1. Design and layout: Engineers conceptualize anddesign the circuit board layout, including component placement and routing.2. Material selection: Appropriate materials are chosen for the board, taking into consideration factors such as electrical properties, thermal conductivity, and durability.3. Artwork Generation: The design is converted into computer-aided design (CAD) files for manufacturing.Manufacturing.1. Fabrication:Photolithography: A photosensitive layer is applied to the base material, and UV light is used to expose specific areas based on the CAD files.Etching: Exposed areas are etched away, leaving the desired copper circuitry.2. Drilling: Holes are drilled into the board for component mounting and interconnections.3. Plating: Copper plating is applied to the exposed circuitry to enhance conductivity and solderability.4. Solder Mask Application: A protective solder mask is applied to the board, leaving exposed areas for soldering components.5. Silkscreen Printing: Component reference numbers and other markings are printed on the board.Assembly.1. Component Placement: Electronic components areplaced on the board using automated pick-and-place machines or manual assembly.2. Soldering: Components are soldered to the boardusing various techniques, including wave soldering, reflow soldering, and hand soldering.3. Inspection and Testing: Automated optical inspection (AOI) and electrical tests are performed to ensure theboard meets quality standards and specifications.4. Programming: Firmware or software may be programmed into programmable devices on the board.Finishing.1. Conformal Coating: A protective coating is appliedto the board to enhance resistance to environmental factors,such as moisture and corrosion.2. Packaging: The completed circuit board is packaged for storage or shipment.中文回答：电路板生产流程图，全方位概述。
雅思流程图开花流程英语写作
雅思流程图开花流程英语写作Alright, here's a sample essay on the flowchart process of flower blooming in an informal, conversational, and varied English style:You know, the whole flower blooming process is pretty fascinating. It starts with a tiny seed, you know? Just a little thing, but with so much potential. And then, it gets planted in the soil. It's like, "Alright, world, I'm ready to grow!"Then comes the part where the seed starts to sprout.It's like a baby peeking out of its blanket, curious about its new surroundings. The roots go down deep, searching for nutrients, while the stem and leaves start to take shape.It's all so exciting!After a while, you start to notice buds forming. It's like the flower is getting ready for its big moment. You can almost see the anticipation in those tight buds,waiting to explode into color. And when they finally do,it's just breathtaking. The colors, the shapes, it's all so perfect.But it's not just about the beauty. The flower attracts pollinators, like bees and butterflies. It's a whole ecosystem, you see?。
雅思小作文流程图瓶子
雅思小作文流程图瓶子英文回答：I can definitely help you with that. Let me explain the process of making a flow chart for the IELTS Writing Task 1 using a bottle as an example. First, you need to start by drawing the shape of a bottle at the top of the page. Then, you should add the main categories of information that the flow chart will represent, such as the production process or the distribution channels. After that, you can draw arrows to connect the different stages of the process, and add any necessary labels and descriptions. Finally, don't forget to review and revise your flow chart to make sureit's clear and easy to understand.中文回答：当然可以帮你解决这个问题。
让我用一个瓶子的例子来解释如何制作雅思写作任务1的流程图。
首先，你需要在纸的顶部画一个瓶子的形状。
然后，你应该添加流程图将代表的主要信息类别，比如生产过程或分销渠道。
之后，你可以画箭头连接流程的不同阶段，并添加必要的标签和描述。
最后，不要忘记检查和修改你的流程图，以确保它清晰易懂。
雅思小作文之流程图
ACADEMICWRITING（2）TIME ALLOWED: 1 hour
WRITING TASK 1
You should spend about 20 minutes on this task. (Write at least 150 words.)
The diagram below shows the method of obtaining water outdoors.
WRITING TASK 2
You should spend about 40 minutes on this task. (Write at least 250 words.)
Present a written argument or case to an educated reader with no specialist knowledge of the following topic.
The chart describes howwater is obtainedfrom outside environment especially in sunshine conditions.
According to the figure,the first step of obtaining water outdoors is tofind a hole with green plants on the bottom.Next,remove the green plants on the middle of the bottom and put a container there.Then,cover the hole with a plastic sheet and place two stones on both ends of it to secure its position. A third stoneis laidon the middle of the plastic sheetso thatthe middle part is also the lowest part.
雅思小作文流程图范文
雅思小作文流程图范文The given flow chart illustrates the process of how to write a high-quality IELTS essay. It consists of several steps, including understanding the question, brainstorming ideas, planning the essay, writing the introduction, body paragraphs, and conclusion, and finally, proofreading and editing the essay. This essay will discuss each step in detail and provide tips on how to write a successful IELTS essay.Firstly, it is essential to understand the question before starting to write the essay. This involves carefully reading the question and identifying the key points and instructions. It is crucial to understand the requirements of the task, such as whether it is an opinion essay, a discussion essay, or a problem-solution essay. Understanding the question will help the writer to focus on the topic and avoid going off-topic.After understanding the question, the next step is to brainstorm ideas. This involves generating as many ideas as possible related to the topic. It is helpful to jot down all the relevant points that come to mind, without worrying about organization or structure at this stage. Brainstorming will help the writer to have a pool of ideas to choose from when planning the essay.The third step is to plan the essay. This involves organizing the ideas generated during the brainstorming stage into a coherent structure. The writer should decide on the main points that will be included in the introduction, body paragraphs, and conclusion. It is important to create a clear and logical plan that will guide the writing process.Once the essay is planned, the next step is to write the introduction. The introduction should grab the reader's attention and provide a clear overview of the topic. It should also include a thesis statement that outlines the main argument of the essay. A well-written introduction will set the tone for the rest of the essay and engage the reader from the beginning.After writing the introduction, the writer should focus on the body paragraphs. Each body paragraph should focus on a single main point and provide supporting evidence andexamples. It is important to use cohesive devices to link the ideas and create a smooth flow between paragraphs. The body paragraphs should be well-structured and address the key points outlined in the essay plan.Following the body paragraphs, the writer should write the conclusion. The conclusion should summarize the main points of the essay and restate the thesis statement. It should also provide a final thought or recommendation related to the topic. A strong conclusion will leave a lasting impression on the reader and bring the essay to a satisfying close.The final step in the process is to proofread and edit the essay. This involves checking for grammatical and spelling errors, as well as ensuring that the essay follows a logical and coherent structure. It is helpful to read the essay aloud to catch any awkward phrasing or unclear sentences. Proofreading and editing are crucial to producing a high-quality IELTS essay.In conclusion, writing a successful IELTS essay involves several key steps, including understanding the question, brainstorming ideas, planning the essay, writing the introduction, body paragraphs, and conclusion, and finally, proofreading and editing the essay. By following this process and paying attention to detail, writers can produce well-organized and coherent essays that will impress IELTS examiners.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
雅思小作文：流程图和其他数据图最大的区别在于：流程图是纯文字的，以描述为主，属于说明文。
相比之下，柱状图、饼状图、表格等数据图则需要对数据进行分析和比较。
从这个角度来说，其实数据图更难。
写好流程图，需要注意以下五个方面：
一、时态相对单一，主要用一般现在时。
二、经常使用被动语态，显得比较客观和正式。
三、找出流程图的始末点，并划分中间的步骤或阶段。
四、掌握表示“顺序”的连接词(Sequencing Words)，用来说明过程的各个步骤和先后顺序。
重点掌握以下几个词。
例如，表示过程用"process" 或"procedure"，过程的各个阶段和步骤可
以用"stage"或"step"来描述。
在谈到第一个步骤时可以用连接词"At first"、"To begin with"、"In the first stage"等引出。
在进入中间的步骤时可以用"Then"、"Next"、"After that"或"The second stage"等，最后一个步骤可以用"Finally"、"Lastly"或"The final stage"。
当然，如果有一些平行的步骤也
可以用"At the same time"、"Meanwhile"等来引出。
五、对于题目里出现的专业词汇或生词，不认识也没关系，只需照抄即可。
简单地说, 流程图的本质其实就是要求学生将图中出现的文字信息用连贯的语言串起来，不需
要过多地发挥。
建议同学们考前可以多看几篇流程图作文的范文，例如剑6的Test3，以及写作机经里的流程图例子等等。
只要熟悉流程图的特点和写作方法，真正做到有备而来，那么流程图作文对你来说
将会是小菜一碟。
The fist diagram shows that there are four main stages in the life of the silkworm .(首先简单描述
一下这个流程的共有几个环节）First of all , eggs are produced by the moth and it takes ten days for each egg to become a silkworm larva that feeds on mulberry leaves. This stage lasts for up to six weeks until the larva produces a cocoon of silk thread around itself. After a period of about three weeks, the adult moths eventually emerge from these cocoons and the life cycle begins again.
The cocoons are the raw material used for the production of silk cloth. Once selected , they are boiled in water and the threads can be separated in the unwinding stage .Each stage is between 300 and 900 meters long , which means they can be twisted together , dyed and then used to produce cloth in the weaving stage.
Overall, the diagrams show that the cocoon stage of the silkworm can be used to produce silk cloth through a very simple process.。