英搏尔 MC 说明书
MC12026A 1.1GHz 双模预分频器 用户手册说明书
MC12026A1.1 GHz Dual Modulus PrescalerDescriptionThe MC12026A is a high frequency, low voltage dual modulus prescaler used in phase-locked loop (PLL) applications.The MC12026A can be used with CMOS synthesizers requiring positive edges to trigger internal counters in a PLL to provide tuning signals up to 1.1GHz in programmable frequency steps.A Divide Ratio Control (SW) permits selection of an 8/9 or 16/17divide ratio as desired.The Modulus Control (MC) selects the proper divide number after SW has been biased to select the desired divide ratio.Features•1.1GHz Toggle Frequency •Supply V oltage 4.5 to 5.5V •Low Power 4.0mA Typical•Operating Temperature Range of −40 to 85°C•The MC12026 is Pin Compatible with the MC12022•Short Setup Time (t set ) 6.0*************GHz•Modulus Control Input Level is Compatible with Standard CMOS and TTL•These Devices are Pb-Free, Halogen Free and are RoHS CompliantTable 1. FUNCTIONAL TABLESW MC Divide RatioH H 8H L 9L H 16LL171.SW: H = V CC , L = Open. A logic L can also be applied by grounding this pin,but this is not recommended due to increased power consumption.2.MC: H = 2.0V to V CC , L = GND to 0.8V.Table 2. MAXIMUM RATINGSCharacteristicsSymbol Value UnitPower Supply Voltage, Pin 2V CC −0.5 to 7.0Vdc Operating Temperature Range T A −40 to 85°CStorage Temperature Range T stg −65 to 150°C Modulus Control Input, Pin 6MC −0.5 to 6.5Vdc Maximum Output Current, Pin 4I O10.0mAStresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.NOTE:ESD data available upon request.PIN CONNECTIONS(Top View)IN IN V CC SW OUTNC MC GNDSOIC −8NB D SUFFIX CASE 751−07MARKING DIAGRAM*A = Assembly Location L = Wafer Lot Y = YearW = Work WeekG= Pb-Free Package8ORDERING INFORMATIONDevicePackageShipping †MC12026ADG SOIC −8NB (Pb-Free)98 Units/Tube MC12026ADR2GSOIC −8NB (Pb-Free)2500/T ape & Reel†For information on tape and reel specifications, in-cluding part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, .(Note: Microdot may be in either location)*For additional marking information, refer to Application Note AND8002/D .Table 3. ELECTRICAL CHARACTERISTICS (V CC = 4.5 to 5.5; T A = −40 to 85°C, unless otherwise noted.)CharacteristicSymbolMin Typ Max Unit Toggle Frequency (Sin Wave)f t 0.1 1.4 1.1GHz Supply Current Output Unloaded (Pin 2)I CC − 4.0 5.3mA Modulus Control Input High (MC)V IH1 2.0−V CC V Modulus Control Input Low (MC)V IL1GND −0.8V Divide Ratio Control Input High (SW)V IH2V CC − 0.5V V CC V CC + 0.5V V Divide Ratio Control Input Low (SW)V IL2OPEN OPEN OPEN −Output Voltage Swing(R L = 560W ; I O = 5.5mA) (Note 1)(R L = 1.1k W ; I O = 2.9mA) (Note 2)V out1.01.6−V ppModulus Setup Time MC to Out (Note 3)t SET − 6.09.0ns Input Voltage Sensitivity 100−250MHz 250−1100MHzV in400100−−10001000mVpp1.Divide Ratio of ÷8/9 at 1.1GHz, C L = 8.0pF.2.Divide Ratio of ÷16/17 at 1.1GHz, C L = 8.0pF.3.Assuming R L = 560W at 1.1GHz.In In MCSWFigure 2. Modulus Setup TimeModulus setup time MC to out is the MC setup or MC release plus the prop delay.InOutMCFigure 3. AC Test CircuitCC = 4.5 to 5.5VEXTERNAL COMPONENTS C1 = C2 = 1000 pF C3 = 0.1m FC L = 8pF (Including Scope and Jig Capacitance)R L = 560W (for ÷8/9 at 1.1GHz)20040060080010001200140016001800Figure 4. Input Signal Amplitude Versus Input Frequency+15.0+10.0+5.00-5.0-10.0-15.0-20.0-25.0-30.0-35.0-40.0-45.0-50.0+1257.40+0.71+1.26+2.24+3.98+7.07+12.57+22.36+39.76+70.71+125.74+223.61+397.64+707.11020040060080010001200140016001800FREQUENCY (MHz)A M P L I T U D E (dB m )m V r m sFREQUENCY (MHz)0400800120016002000m V p pFigure 5. Output Amplitude Versus Input FrequencyDivide Ratio = 8; V CC = 5.0V; T A = 25°CFigure 6. Typical Output Waveform880mV36.6ns86.6ns5.88V(÷8, 1.1 GHz Input Frequency, V CC = 5.0, T A = 25°C, Output Loaded With 8.0pF)−−−−−−−−−−−−−100200300400500600700800900100011001200Figure 7. Typical Input Impedance Versus Input FrequencyO H M S jXRECLinPS is a registered trademark of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.SOIC −8 NB CASE 751−07ISSUE AKDATE 16 FEB 2011NOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: MILLIMETER.3.DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION.4.MAXIMUM MOLD PROTRUSION 0.15 (0.006)PER SIDE.5.DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBARPROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION.6.751−01 THRU 751−06 ARE OBSOLETE. NEW STANDARD IS 751−07.SCALE 1:1STYLES ON PAGE 2DIM A MIN MAX MIN MAX INCHES4.805.000.1890.197MILLIMETERSB 3.80 4.000.1500.157C 1.35 1.750.0530.069D 0.330.510.0130.020G 1.27 BSC 0.050 BSC H 0.100.250.0040.010J 0.190.250.0070.010K 0.40 1.270.0160.050M 0 8 0 8 N 0.250.500.0100.020S5.806.200.2280.244MYM0.25 (0.010)YM0.25 (0.010)Z SXS____XXXXX = Specific Device Code A = Assembly Location L = Wafer Lot Y = YearW = Work WeekG = Pb −Free PackageGENERICMARKING DIAGRAM*8ICDiscrete 0.60.024ǒmm inchesǓSCALE 6:1*For additional information on our Pb −Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*Discrete(Pb −Free)IC (Pb −Free)XXXXXX = Specific Device Code A = Assembly Location Y = Year WW = Work Week G = Pb −Free Package*This information is generic. Please refer todevice data sheet for actual part marking.Pb −Free indicator, “G” or microdot “G ”, may or may not be present. Some products may not follow the Generic Marking.MECHANICAL CASE OUTLINEPACKAGE DIMENSIONSSOIC −8 NB CASE 751−07ISSUE AKDATE 16 FEB 2011STYLE 4:PIN 1.ANODE2.ANODE3.ANODE4.ANODE5.ANODE6.ANODE7.ANODEMON CATHODE STYLE 1:PIN 1.EMITTER2.COLLECTOR3.COLLECTOR4.EMITTER5.EMITTER6.BASE7.BASE8.EMITTER STYLE 2:PIN 1.COLLECTOR, DIE, #12.COLLECTOR, #13.COLLECTOR, #24.COLLECTOR, #25.BASE, #26.EMITTER, #27.BASE, #18.EMITTER, #1STYLE 3:PIN 1.DRAIN, DIE #12.DRAIN, #13.DRAIN, #24.DRAIN, #25.GATE, #26.SOURCE, #27.GATE, #18.SOURCE, #1STYLE 6:PIN 1.SOURCE2.DRAIN3.DRAIN4.SOURCE5.SOURCE6.GATE7.GATE8.SOURCE STYLE 5:PIN 1.DRAIN2.DRAIN3.DRAIN4.DRAIN5.GATE6.GATE7.SOURCE8.SOURCESTYLE 7:PIN 1.INPUT2.EXTERNAL BYPASS3.THIRD STAGE SOURCE4.GROUND5.DRAIN6.GATE 37.SECOND STAGE Vd 8.FIRST STAGE Vd STYLE 8:PIN 1.COLLECTOR, DIE #12.BASE, #13.BASE, #24.COLLECTOR, #25.COLLECTOR, #26.EMITTER, #27.EMITTER, #18.COLLECTOR, #1STYLE 9:PIN 1.EMITTER, COMMON2.COLLECTOR, DIE #13.COLLECTOR, DIE #24.EMITTER, COMMON5.EMITTER, COMMON6.BASE, DIE #27.BASE, DIE #18.EMITTER, COMMON STYLE 10:PIN 1.GROUND2.BIAS 13.OUTPUT4.GROUND5.GROUND6.BIAS 27.INPUT8.GROUND STYLE 11:PIN 1.SOURCE 12.GATE 13.SOURCE 24.GATE 25.DRAIN 26.DRAIN 27.DRAIN 18.DRAIN 1STYLE 12:PIN 1.SOURCE2.SOURCE3.SOURCE4.GATE5.DRAIN6.DRAIN7.DRAIN8.DRAINSTYLE 14:PIN 1.N −SOURCE2.N −GATE3.P −SOURCE4.P −GATE5.P −DRAIN6.P −DRAIN7.N −DRAIN8.N −DRAIN STYLE 13:PIN 1.N.C.2.SOURCE3.SOURCE4.GATE5.DRAIN6.DRAIN7.DRAIN8.DRAIN STYLE 15:PIN 1.ANODE 12.ANODE 13.ANODE 14.ANODE 15.CATHODE, COMMON6.CATHODE, COMMON7.CATHODE, COMMON8.CATHODE, COMMON STYLE 16:PIN 1.EMITTER, DIE #12.BASE, DIE #13.EMITTER, DIE #24.BASE, DIE #25.COLLECTOR, DIE #26.COLLECTOR, DIE #27.COLLECTOR, DIE #18.COLLECTOR, DIE #1STYLE 17:PIN 1.VCC2.V2OUT3.V1OUT4.TXE5.RXE6.VEE7.GND8.ACCSTYLE 18:PIN 1.ANODE2.ANODE3.SOURCE4.GATE5.DRAIN6.DRAIN7.CATHODE8.CATHODESTYLE 19:PIN 1.SOURCE 12.GATE 13.SOURCE 24.GATE 25.DRAIN 26.MIRROR 27.DRAIN 18.MIRROR 1STYLE 20:PIN 1.SOURCE (N)2.GATE (N)3.SOURCE (P)4.GATE (P)5.DRAIN6.DRAIN7.DRAIN8.DRAIN STYLE 21:PIN 1.CATHODE 12.CATHODE 23.CATHODE 34.CATHODE 45.CATHODE 5MON ANODEMON ANODE8.CATHODE 6STYLE 22:PIN 1.I/O LINE 1MON CATHODE/VCCMON CATHODE/VCC4.I/O LINE 3MON ANODE/GND6.I/O LINE 47.I/O LINE 5MON ANODE/GND STYLE 23:PIN 1.LINE 1 INMON ANODE/GNDMON ANODE/GND4.LINE 2 IN5.LINE 2 OUTMON ANODE/GNDMON ANODE/GND8.LINE 1 OUT STYLE 24:PIN 1.BASE2.EMITTER3.COLLECTOR/ANODE4.COLLECTOR/ANODE5.CATHODE6.CATHODE7.COLLECTOR/ANODE 8.COLLECTOR/ANODE STYLE 25:PIN 1.VIN2.N/C3.REXT4.GND5.IOUT6.IOUT7.IOUT8.IOUTSTYLE 26:PIN 1.GND2.dv/dt3.ENABLE4.ILIMIT5.SOURCE6.SOURCE7.SOURCE8.VCCSTYLE 27:PIN 1.ILIMIT2.OVLO3.UVLO4.INPUT+5.SOURCE6.SOURCE7.SOURCE8.DRAINSTYLE 28:PIN 1.SW_TO_GND2.DASIC_OFF3.DASIC_SW_DET4.GND5.V_MON6.VBULK7.VBULK8.VINSTYLE 29:PIN 1.BASE, DIE #12.EMITTER, #13.BASE, #24.EMITTER, #25.COLLECTOR, #26.COLLECTOR, #27.COLLECTOR, #18.COLLECTOR, #1STYLE 30:PIN 1.DRAIN 12.DRAIN 13.GATE 24.SOURCE 25.SOURCE 1/DRAIN 26.SOURCE 1/DRAIN 27.SOURCE 1/DRAIN 28.GATE 1PUBLICATION ORDERING INFORMATIONTECHNICAL SUPPORTLITERATURE FULFILLMENT:。
Whirlpool Switzerland 与 Bauknecht AG 产品说明书
Whirlpool Switzerland, www.whirlpool.chBauknecht AG, Industriestrasse 36, 5600 Lenzburg, www.bauknecht.chVerkaufTelefon 0848 801 002Fax 0848 801 017********************Kundendienst Telefon 0848 801 001Fax 0848 801 003********************ErsatzteileTelefon 0848 801 005Fax 0848 801 004******************************Instructions for use AWE 6517GB AWE 65175019 312 10639Whirlpool is a registered trademark of Whirlpool USA.PROGRAMME CHARTN.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.5019 312 10639that they are properly locked.2. Add detergent and additives into the dispenser to no more than the “MAX”level mark, as follows:• Programme with pre and main wash • Main wash programme without prewash • Fabric softeners and conditioners • Stain remover agents• Anti-scale agents (if necessary)3. Close the lid.4. T urn the programme selector to the desiredprogramme and temperature. The lamp next to the “Start/Pause” button flashes. The indication lamp of the predefined spin speed lights up.compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.* T o reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.** Reference Programme for Energy Label.lights to show the the lid can be opened. As long as a wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the“T roubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.“Water tap closed”The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the “T roubleshooting Guide” in the Instructions for Use.“Clean pump”Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).“Rinse Hold” button• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.• This option is particularly recommended for the “Synthetics”, “Daily load” and “Delicates” programmes.• It is useful if you want to postpone spinning to a later time, or if you want to drain out only.• If you select “Rinse Hold”, do not leave items to soak for too long.• As soon as the appliance stops in the rinse hold, the “Rinse hold” lamp of the sequence indicator lights up and the lamp next to the “Start/Pause” button flashes.T erminate the “Rinse Hold” option:• Press the “Start/Pause” button; the programme will terminate automatically with the final spin cycle for the present wash programme.• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain”programme and press the “Start/Pause” button.“Half load” button• Reduces water consumption, above all during rinsing.• Suitable for lightly soiled laundry and small loads (max. 3 kg).“Variable spin” button• Every programme has a predefined spin speed.• Press the button to set another spin speed.• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during the rinse. The water is drained out only.Whirlpool is a registered trademark of Whirlpool USA.The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. When the programme phrase is finised, the corresponding indication goes out.• Note: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.are off, and the “Door open” indication lights up.1. T urn the programme selector to the “Off/O” position.2. Close the water tap.3. Open lid and drum and unload the machine.4. Leave the lid open for some time to allow the interior of the machine to dry.programme. The light flashes.2. Select the new programme, any options and another spin speed if you want.3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do notadd detergent for this programme.end. Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.any time during the programme. The option will be applied as long as the corresponding programme phase has not been executed yet.“Prewash” button• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 20 min.“Intensive rinse” button• The amount of water is increased to ensure a more intensive rinse.• This option is particularly suitable for areas with very soft water, washing baby linen and people with skin allergies.。
Whitehall 温疗仪说明书
INSTRUCTIONS FOR OPERATION AND CARE OFP .O. Box 3527 • City of Industry, CA, 91744-0527, U.S.A.800-782-7706 • 626-968-6681 • Whitehall Manufacutring is a Member of Acorn Engineering’s Family of Companies.6900-101-000 May 2009Dry Heat Theraphy(Models TT-101, TT-101L, and TT-202)TT-101TT-101LTT-202TABLE OF CONTENTSIntroduction (3)TT-101 Product Information (4)TT-101L Product Information (5)TT-202 Product Information (6)Requirements for Installation (7)Receiving Instructions (7)Specifications (7)Symbol Instructions (8)Instructions for Use and Operating Controls (9)Maintenance of the Unit (9)Changing the Fuse (10)Troubleshooting Guide (11)Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: Thermo-Electric’s Thermo Therapy Units are designed to safely provide the benefits of Celstim ® - a specially processed, granulated, sterilized cellulose successively filtered to removed the maximum number of fines- being held in animated suspension and gently and warmly massaging a patient’s hand, wrist, arm or foot, ankle, leg.Model TT-101 is designed principally for home use – but can be used in small clinics and offices – and is constructed with a variable speed blower, variable heat, front and top treatment ports and obtains its air supply through a bottom located filtered and sound baffled fresh air inlet.Although the unit is small and compact and the opportunity for noise control is limited, the unit operates only slightly louder than our larger units because of strategically placed sound baffles.Model TT-101L is of the same construction as the TT-101, but possesses a treatment chamber that is 3” deeper and 2” longer than the TT-101 and is designed for the small clinic or office.An optional stand is available for both the TT-101 and TT-101L models.Model TT-202 is floor mounted. TT-202 has dual blowers and speed controls as well as dual top and rear treatment ports. The unit has permanently installed rubber pads along the top to provide patient under arm comfort.All Thermo-Theraphy Units have an elevated top edge on 3 sides to best capture and prevent the spread of errant Celstim®.The controls located on the control panel are of rugged, long lasting “mechanical” design and any single controlling component can individually and replaced.On all models, the air distribution assembly is separated from the patient by a patient protection grill remaining at nearly the same temperature as the Celstim and also eliminates any shocking from static electricity.The rear upper panels can also be removed by qualified service personnel and the blowers, heating element, etc., are easily and quickly removed and replaced in the event of a malfunction. In fact, the blower(s) are mounted on a board which with the removal of one screw slides out of immediate access.For additional safety, the heating element’s compartment is lined with metal and dual safety switches set specificallynot to exceed 275°F (135°C). Also, a fourth thermostat is located behind the control panel which mimics the control thermostat and assures a maximum Celstim temperature of 125-128°F (51.7-53.3°C).So, congratulations on your new Thermo-Therapy Unit – we welcome your comments, recommendations and/or any questions.Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: Hospital Grade PlugTop Inlet Port with Velcro tightening sleevesRemovable Rear Panel for Access to Treatment Cavity and Easy Celstim RemovalReplaceable15 AMP FusesTT-101 ON OPTIONAL STANDCONTROL PANEL TT-101Fresh Air Inletand Filter (Underneath)Strong Rugged Housing Control PanelTightening SleevesTreatment Ports Complete withRemovable VelcroPhone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: TT-101L ON OPTIONAL STANDCONTROL PANEL TT-101LTreatment Ports Complete with Removable VelcroFresh Air Inlet and Filter (Underneath)Strong Rugged HousingTightening SleevesPhone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: TT-202 ON OPTIONAL STANDCONTROL PANEL TT-202Top Treatment PortsRemovable Upper Panelfor Easy Celstim RemovalRemovable Panel for Access by Qualified Repair PersonnelTop and Rear Treatment Ports with Removable Velcro Tightening SleevesAir Intake and FilterHospital Grade PlugControl Panel (See Below)Lower frontstorage compartmentLocking CastersPhone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: Models TT-101, and TT-101L are furnished with a hospital grade plug and require up to 13 amps for proper operation. Therefore, as a minimum, a 15-amp breaker and GFI protected outlet should be made available for electric power.Model TT-202 is also furnished with a hospital grade plug but can require up to 17 amps of electric power. Therefore, 20 amp service and a GFI protected outlet should be provided.Since these units produce large volumes of exhausted air, some minimal dusting may occur. Therefore, good ventilation must be considered. Patients and operators sensitive to small amounts of discharged Celstim dust should be provided with a mask and/or the treatment ports and the extremity being treated could be covered with a damp towel.Celstim on any surface, particularly on tile floor is extremely slippery and caution must be carefully exercised. Again, particularly tile floors must be kept free of this material – a frequently swept, thick carpet under the unit is ideal. Also, the floor near the air intake ports must be kept clean to prevent small dirt, dust and Celstim particles from entering the motor chamber.Also, since all the units’ blowers, particularly on the TT-101 and TT-101L, and even though they are sound baffled to the best of our ability, can be considered noisy. Consideration should be made for treatment in a separate room or at the end of a large room.RECEIVING INSTRUCTIONSAll Thermo-Therapy models are shipped complete with the proper amount of sterilized Celstim and as soon as they are carefully unpacked they are “ready to go”.If shipping damage has occurred, notify Whitehall Manufacturing immediately so a proper claim can be made and replacement or repair secured.SPECIFICATIONSTT-101 – the outside dimensions are 19-1/2” (50 cm) L x 16-1/2” (41 cm) H x 10-1/2” (27 cm) When placed on the optional stand, the bottom is 13-1/2” (34 cm) and the top is 28” (71 cm) from the floor. The Celstim capacity is approximately 10 lbs. (4.5 kg) and the treatment chamber is approximately 7-1/2” (19 cm) H x 9” (23 cm) W x15-1/2” (39 cm) L. The blower is driven by a variable speed controlled motor. Variable heat is provided by a finned, dual safety switched 900 watt heater.TT-101L – the outside dimensions are 23” (58 cm) L x 18” (46 cm) H x 10-1/2” (27 cm) W. When placed on optional stand, the bottom is 13-1/2” (34 cm) and the top is 31” (79 cm) from the floor. The Celstim capacity is 12 lbs. (5.4 kg) and the treatment chamber is 8-1/2” (22 cm) H x 9” (23 cm) W x 18-1/2” (47 cm) L. The blower motor and heater are the same for the TT-101.TT-202 – the outside dimensions are 29” (74 cm) L x 35” (89 cm) H x 16-1/2” (42 cm) W. The locking casters are at the extreme width of the unit and are mounted on thick steel plates to protect the units’ bottom from damage when there are uneven floors. The Celstim capacity is approximately 40 lbs. (18 kg) and the treatment compartment is 22” (56 cm) L and 15-1/2” (39 cm) W x 13” (33 cm) H. There are two blower motors combined with the 900 watt heater on model TT-202. Interestingly, the blowers on the TT-202 are individually controlled and through independent speed manipulation can provide varying air flow patterns in the treatment chamber.ELECTRICAL REQUIREMENTTT-101 and TT-101L – 120V/15 Amp/60 Hz.TT-202 – 120V/20 Amp/60 Hz.REQUIREMENTS FOR INSTALLATIONPhone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: The instructions below are indicated by specific symbols. Anunderstanding of these symbols, their companion text and the specific instructions and captions must be understood prior to operation of the equipment and patient equipment.ATTENTION- Consult the accompanying documents.Ignoring the following could cause injury orequipment damage.•All internal parts capable of transmitting electric current are grounded through the hospital grade plug. Therefore, the electrical outlet to which the unitis attached must be properly grounded and utilized a compatible hospital grade receptacle.• The floor must be level for proper and safe use.•Thermo-Therapy units are intended for use only where the person utilizing the treatment is under the supervision of trained personnel.• Always disconnect the line cord plug from the receptacle before working on any unit.•For TT-101 and TT-101L, since the air intake is on the bottom, make sure the unit is placed on a hard, inflexible surface as the blower suction will pull up any flexible material and cause the blower to labor.•As previously mentioned, Celstim on a hard surface is slippery and regular cleaning or use of a carpet is required (see page 7).•Treatment temperature must be monitored closely and, of course, a patient’s medical history must be reviewed, as with any heat modality, for heat sensitivity and circulatory problems.•Again, good ventilation should be considered and patients and operators sensitive to dust should with a mask and/or the treatment ports and the extremity being treated could be covered with a damp towel.•Constant supervision is necessary when the unit is used with children, invalids, or any one who cannot safely operate the unit.WARNING -– These are safety infractionsthat can cause serious injury.• Do not use unit outdoors.•Thermo-Therapy units should not be used with electrically susceptible patients without a physician’s approval. The definition of such patient is “a patient being treated with an externally electrically conductive device indwelling or implanted and terminating on or near the heart”.• Refer service and electrical problem to qualified personnel and/or Whitehall Manufacturing only. •Do not use if the unit, cord, or plug has been damaged. Return unit to Whitehall Manufacturing or a qualified service center.• Do not touch cord or plug if you are wet, standing in water or on a wet surface.•Do not use an electrical extension cord. Plug unit directly into a properly grounded receptacle. If there is question on the grounding of the receptacle, call electrician. An outlet with a Ground Fault Circuit •Should water enter the enclosure under any circumstance, the unit should be examined by a qualified service center before further use of this unit.•Again, do not defeat or alter the grounding means of the attachment plug and the power supply cord must be plugged into a properly wired and grounded hospital grade receptacle.EXPLOSION HAZARD•Do not operate any Thermo-Therapy Unit where oxygen or flammable anesthetics are present.!!!Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: Please refer the photos on page 4 for TT-101, page 5 for TT-101L and page 6 for TT-202 .Thermo-Therapy Units will only operate with the power switch on and the treatment timer activated.Rotate the Celstim agitation or speed control(s) clockwise to increase air speed and flow. Rotate the controls counter clockwise to decrease the air speed and flow. On the TT-202, speed or agitation is normally balanced between the two blowers- but can be adjusted differently to effect varying treatment modes.Heat is also increased by rotating the heat control knob clockwise- from “A” lowest heat to “K” highest heat. Treatment time is indicated as minutes with 20 minutes highlighted as being the usual treatment cycle.All Thermo-Therapy Units are temperature safety switched at approximately 125° F (51.7°C) and if an operating thermometer ever indicates temperature higher than this, the unit must be referred to a qualified repair service or returned to Whitehall Manufacturing.In an effort to best prolong the motor life, the unit must be turned off between treatments. DO NOT LEAVE THE UNIT ON CONTINUOUSLY . Once the Celstim is at operating temperature and the blowers are turned off, heat loss is approximately 2-3°F (0.55-1.65°C) per hour.Make sure the body part being treated is as dry as possible as moisture in the Celstim will cause “caking”.Also, be careful at all times, to tightly close the sleeves at the treatment ports so minimal amount of Celstim escapes from the unit.MAINTENANCE OF THE UNITThe most important maintenance function on all Thermo-Therapy products is to make sure to keep all the incoming air filters clean and unclogged. If this is not done, airflow will be restricted resulting in less agitation, over-heated motors, and premature motor failure. We have enclosed a spare filter so one filter can always be cleaned and on standby, and a proper wrench to remove the filter cover.The housing can be cleaned with a mild household cleaner without damage as its surface is similar to that found on kitchen counters and cabinets.The treatment port sleeves can be washed and replaced. To remove the sleeves, carefully pull the bottom of the rims toward the center away from the side and at the same time pull or push them up and out of the housing. Then pull the sleeves from the Velcro found underneath the rim. Reverse the procedure to replace the sleeves. If the sleeve or rims become worn, replacements are readily available from Whitehall Manufacturing or your therapy products dealer. On the TT-101 and TT-101L models, remove the outer cover and remove and clean the primary filter. If necessary, remove the four screws to access the secondary filters. Replacements are readily available.On the TT-202, unscrew and remove the filter covers located on the lower rear panel and remove the filters. Again, the filter media can be washed and dried and reinstalled or a replacement can be obtained. A hex or Allen wrench has been provided for removing the filter cover.Pay particular attention to the air inlet on the TT-101 and TT-101L since it is on the units’ bottom and close to whatever surface it is placed upon. Also make sure this surface is rigid as the blower will pull up any flexible material and cause the blower to labor.The Celstim, after prolonged use, may become too fine for effective therapy and can be replaced by removing the top sleeve and “digging” it out or by removing the rear top panel. If the panel is removed, be prepared to contain any spillage. Also, make sure the panel is tightly reinstalled to prevent any Celstim from escaping. A “hex” wrench has been provided for removing and replacing the screws from the top panel.Sterilized Celstim, with fines removed, for replacement or addition is readily available in a 10 lb. (4.5 kg) box containing two (2) 5 lb. (2.25 kg) plastic “jugs” for easy adding.Too much Celstim in the treatment chamber can cause a “rolling” action- remove the excess Celstim through a top port.Too little Celstim results in a perceived loss of agitation. Normal capacity is as follows:TT-101 – 10 lbs. (4.5 kg)TT-101L – 12 lbs. (5.4 kg)TT-202 – 40 lbs. (18 kg)INSTRUCTIONS FOR USE AND OPERATING CONTROLSCHANGING THE FUSETurn the Thermo-Therapy unit off via the controls on the frontpanel and then unplug the unit. Allow the unit to cool. Next,position the unit to allow ccess to the rear of the Thermo-Therapy device. Locate the fuse holders at rear of the unitnear cord.Depress the Fuse holder caps with the use of a “common”blade screwdriver or fingers and rotate counterclockwiseapproximately 90° or until the cap becomes loose. Removethe fuse holder cap, exposing the glass fuse. Remove theblown fuse. Once the old fuse has been removed, replace itwith a new fuse of the same kind and amperage. Re-installthe fuse holder cap by depressing and rotating clockwiseapproximately 90° and ensure that the fuse holder caps aresecured. Plug the unit back in to a power outlet. Turn the uniton via front control panel. Allow the unit to warm up to theoperating temperature and use as required.Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: If You NoticeThe Likely Cause IsYou Can Correct It ByCelstim not heating to desiredtemperature but heat on indicator if lit.The heat control thermostat failed or the control knob has slipped.Refer to qualified repair personnelThe Celstim agitation is poor.Check the air filter for collected dust and debris.Or Check the level of Celstim.Clean the air intake filter(s). On TT-101 and TT-101L models, make sure the bottom intake is not obstructed. Too much Celstim will cause a “rolling” action and some should be removed. Too little Celstim will result in poor agitation.The treatment timer is not working.Failed timer.Refer to qualified repair personnel.The power “On-Off” switch does not work or has failed to light.Unit unplugged, unit fuse(s) has blown, electric outlet supply breaker has opened, local GFCI or GFI has opened, or the switch is faulty.Check outlets’ GFCI, otherwise call an electrical or qualified repair personnel.Heat indicating light is not lit when power on and unit is heating.Burned out indicator light.Refer to qualified repair personnel.Blower speed cannot be controlled or will not operate at full speed.Clogged air inlet filter ormalfunctioning speed controller(s).Clean filter or refer to qualified repair personnelThe unit runs but there is not heat.Probable cause is malfunctioning heater or heater temperature safety switches.Refer to qualified repair personnel.Blower motor(s) will not run or is noisy.Malfunctioning blower motor(s).Refer to qualified repair personnel.Temperature reading is inaccurate.Malfunctioning thermometer.Refer to qualified repair personnel.Low Celstim level.After extensive use of Celstim will lessen in volume. This is a normal occurrence.Add or replace Celstim to required amount or so the unagitated level is slightly below the bottom of the front or rear patient access ports.TROUBLESHOOTING GUIDEMailing Address:P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.APhysical Adress:15125 Proctor Avenue • City of Indusry, CA 91746 U.S.APhone 800-782-7706 • 626-968-6681Fax 626-855-4862Web: E-mail:*********************Any questions regarding servicing of products in Europe or the Middle East should be directed to: Niva Medical Company • Olarinluoma 14 B, FIN-02200 Espoo, FinlandPhone 358 9 615 00 540 • Fax 358 9 615 00 545Webwww.nivamedical.fi•*************************Whitehall Manufacturing is a Division of Acorn Engineering Company6900-101-000 May 2009。
MC虎鉗說明書说明书
ºӊ̨ډཌٙ৷ܓၾኬ͍ᒟᅻޫਂ֛ʂ၍Փf
The height and the guide block side of every vise are
all made with full control.
H-ˉʂʮࢨࠢܓ0.02ˇאf
L-ˉʂʮࢨࠢܓ0.02ˇא
H- Dimension tolerance 0.02
L- Dimension tolerance 0.02 or less. or less.
H L
࢙࠽ Allowance
No.
Ꮸݟධͦ InspectiSS
1
4
ཌɹࠦ࿁ֵ̨͉ࠦኬ͍ᒟᅻʘ̻Бܓ
1. Parallelism of guide block side of body bottom face and fixed jaw clamp force. ཌɹࠦ࿁ਗࠦʘٜۧܓ
MODEL A B C D E F G H
I
J J1 K L
M
153 JQV-160L 161 635 536 99 94 86 60 100 160 355 535 18 145 159 153 JQV-160XL 161 800 701 99 94 86 60 100 160 520 695 18 145 159 153 JQV-160LL 161 985 886 99 94 86 60 100 160 705 800 18 145 159
0.01
0.015
2. Squareness of fixed jaw clamp face and
0.015
0.03
2
5
jaw slide way.
ᕐਉࠦ࿁ਗࠦʘٜۧܓ
Ultimate Ears HYPERBOOM 产品说明书
HOW TO CONNECTTo pair Ultimate Ears HYPERBOOM with your mobile devices, simply turn on the speaker. HYPERBOOM will automatically place Bluetooth Channel 1 into pairing mode.Go to the Bluetooth settings on your mobile device and select Ultimate Ears HYPERBOOM from the list.To pair Ultimate Ears HYPERBOOM with an additional mobile device, simply press the Bluetooth Channel 2 icon. HYPERBOOM will place Bluetooth Channel 2 into pairing mode.Go to the Bluetooth settings on your mobile device and select Ultimate Ears HYPERBOOM from the list.To clear a Bluetooth channel that is connected to a mobile device, simply press and hold the Bluetooth channel button until the LED blinks rapidly.GET STARTEDUltimate Ears HYPERBOOM has a powerful sound and thundering bass. HYPERBOOM is loud, your neighbors won’t like it!Check battery charge level by pressing the “+” and “-” volume buttons simultaneously. Use the included power supply for quickest recharge.ONE TOUCHLONG PRESS TO LAUNCH PLAYLISTSPress and hold for three seconds. Your speaker will play the playlists you set.TAP ONCE TO PAUSE / PLAYWhen music is streaming on the speaker, tap once to pause/play the music.DOUBLE TAP TO SKIPWhen music is streaming on the speaker, tap twice on the button to skip the song.LONG PRESS AGAIN TO SKIP PLAYLISTSLong press again to skip the current playlist.PARTY UPPlease make sure the speaker is updated to the latest version.Tap the party up icon from the home screen to get your party started. Level up the party by connecting as many Ultimate Ears speakers as you can handle!You’ll find your available speakers in the drawer – simply drag & drop onto the screen and get ready to turn up. Touch each speaker to see its name and make sure it’s the right one.When someone’s ready to go, you can drag their speaker back to the drawer and it’s instantly out of your party and ready for something else. Or you can go old school and just turn the speaker off. It’s up to you.Pro Tip: You can Party Up with the following: HYPERBOOM, BOOM, BOOM 2, BOOM 3, MEGABOOM and MEGABOOM 3. Just make sure each speaker is updated to the latest and greatest firmware, otherwise, they won’t be able to join the party and, really, no one wants to be left out.HOW TO DOUBLE UPReady to go big? Double Up your Ultimate Ears HYPERBOOM for a bigger sound.Swipe left from the home screen and tap the Party Up icon. With just a couple taps, double your sound and level up the party.If you prefer the feel of buttons, simply press the Bluetooth and plus (+) buttons on the speaker that’s playing music. Once you hear the doubling tone, press the Bluetooth button twice on the speaker you want to add.DOUBLE UP LOCKYou can set your speakers to automatically Double Up the next time they’re both powered on together. Just go into this app’s Settings and turn Double Up Lock on.You can Double Up any combination of Ultimate Ears speakers that are up to date with the latest and greatest firmware. Make sure your speakers are up to date and mix and match to your heart’s delight.PLAY MUSICOnce Ultimate Ears HYPERBOOM is on and connected to your mobile device, just hit play to begin streaming your music.You can control the volume from your mobile device, or directly from your Ultimate Ears HYPERBOOM.POWERUPWhen powered on, Ultimate Ears HYPERBOOM automatically reconnects to the last mobile device it was connected to on the last active Bluetooth Channel.When not connected to a power source, Ultimate Ears HYPERBOOM will automatically turn itself off after 15 minutes of inactivity to save battery life if not connected to power. VOLUME CONTROLTo control the volume from HYPERBOOM, you can tap the plus and minus to adjust the volume incrementally or tap and hold to increase the volume quickly.。
MC3336控制器故障排查方法(1)
关于MC3336控制器控制器装装车后车辆不能正常行驶的可能情况及排查建议（1） 控制器控制器控制器上电是否正常判断方法上电是否正常判断方法 1、仪表通讯中有R/D 显示的车可以根据仪表是否显示判断控制器是否带电。
例如御捷车在上电的情况下推方向档把切换方向，仪表盘R/D 会跟着变换显示。
2、开钥匙时听一下是否有继电器吸合声音。
3、打开钥匙时踩加速器听控制器是否报长鸣。
4、在开钥匙的情况下测接线端子1脚与B-之间是否有电压（电压伏值同电池电压）。
（2） 前进前进 / 后退信号后退信号是否正常判断方法是否正常判断方法1、在仪表可以显示时检查仪表显示R/D 是否正确。
2、在控制器断电的情况下分别测量接线端子4脚（档把推到前进档）3脚（档把推到后退档）是否与5脚相通。
若确定方向信号不正确或无信号显示，请检查档位器以及接线。
（3） 刹车信号刹车信号1、在未踩刹车的情况下检查刹车灯是否亮，若亮则刹车开关有问题。
2、在刹车灯未亮的情况下测量端子26、27脚之间是否有12V 电压，若有则为线路问题。
（4） 加速器不输出加速器不输出1、 在控制器能正常上电的前提下，打开钥匙时踩加速器，听控制器是否长鸣。
如果没有长鸣声，说明加速器没有输出。
2、 打开钥匙后，挂空挡，踩加速器，测量加速器的输出电平，如果端子的8、31脚之间在12V 左右，说明加速器供电正常；再测量端子的20、31脚之间是否有电压，如果输出电压小于0.5V ，说明加速器输出异常。
（5）编码器信号异常控制器接线都正确，轻踩加速器后发现车不走，或者以很慢的速度移动，同时电机发热快则表明电机编码器信号可能异常了。
第一步：如果电机编码器正常，更换电机相序，即调换电机的U V 或者V W 两相，然后试一下车辆是否可以正常行走了，如果仍然不能正常开动，说明编码器信号有问题了。
第二步：判断电机编码器是否损坏的方法：1、打开钥匙给控制器上电，用万用表测量电机编码器的供电电源，确认引脚6、29之间电压应该在5V左右。
MC控制器故障排查方法
关于MC3336控制器控制器装装车后车辆不能正常行驶的可能情况及排查建议（1） 控制器控制器控制器上电是否正常判断方法上电是否正常判断方法 1、仪表通讯中有R/D 显示的车可以根据仪表是否显示判断控制器是否带电。
例如御捷车在上电的情况下推方向档把切换方向，仪表盘R/D 会跟着变换显示。
2、开钥匙时听一下是否有继电器吸合声音。
3、打开钥匙时踩加速器听控制器是否报长鸣。
4、在开钥匙的情况下测接线端子1脚与B-之间是否有电压（电压伏值同电池电压）。
（2） 前进前进 / 后退信号后退信号是否正常判断方法是否正常判断方法1、在仪表可以显示时检查仪表显示R/D 是否正确。
2、在控制器断电的情况下分别测量接线端子4脚（档把推到前进档）3脚（档把推到后退档）是否与5脚相通。
若确定方向信号不正确或无信号显示，请检查档位器以及接线。
（3） 刹车信号刹车信号1、在未踩刹车的情况下检查刹车灯是否亮，若亮则刹车开关有问题。
2、在刹车灯未亮的情况下测量端子26、27脚之间是否有12V 电压，若有则为线路问题。
（4） 加速器不输出加速器不输出1、 在控制器能正常上电的前提下，打开钥匙时踩加速器，听控制器是否长鸣。
如果没有长鸣声，说明加速器没有输出。
2、 打开钥匙后，挂空挡，踩加速器，测量加速器的输出电平，如果端子的8、31脚之间在12V 左右，说明加速器供电正常；再测量端子的20、31脚之间是否有电压，如果输出电压小于0.5V ，说明加速器输出异常。
（5）编码器信号异常控制器接线都正确，轻踩加速器后发现车不走，或者以很慢的速度移动，同时电机发热快则表明电机编码器信号可能异常了。
第一步：如果电机编码器正常，更换电机相序，即调换电机的U V 或者V W 两相，然后试一下车辆是否可以正常行走了，如果仍然不能正常开动，说明编码器信号有问题了。
第二步：判断电机编码器是否损坏的方法：1、打开钥匙给控制器上电，用万用表测量电机编码器的供电电源，确认引脚6、29之间电压应该在5V左右。
英搏尔 mc509说明书
MC2509控制器使用手册Disigned by inPowerSince 2002IPMC2509系列串励电机控制器特点∙高频电力电子技术为电机提供平滑、无噪音、高效的运行性能。
∙可调节的参数使得客户可优化参数、调节车辆操纵性能。
∙上坡行驶时，独有的防倒滑功能提高车辆安全性能。
∙保险、分流器、接触器全集成安装。
∙蜂鸣器提示各种故障，方便检修。
∙全面的故障检测和保护功能✓加速器故障检测✓电枢线圈短路检测及保护✓控制器过温检测及输出功率衰减✓电机过温检测及输出功率衰减✓电机碳刷磨损检测及处理（可选）✓电池电压低检测及输出功率衰减✓方向开关故障检测✓控制器内部故障检测✓高踏板禁止∙使用编程器可以监视系统的各种运行参数✓电池电压✓加速器输入幅值✓方向开关状态✓电枢电流✓电池电流✓控制器温度✓控制器本次运行时间✓小计里程（可选）∙工作环境温度：-20~℃+50℃∙存储环境温度：-40~℃+80℃∙防护等级：IP66∙绝缘等级：1000V兆欧表 >20MΩ∙重量：4.0kg简介IPMC2509系列串励电机控制器可以为电机提供平滑的无极调速控制和正反转控制。
在更小的尺寸内，集成主接触器及换向接触器，且采用冗余设计，大大降低了传统串励电机控制器因接触器导致的故障率高的问题。
内部采用新工艺，大大提高生产效率，同时提高了系统的生产成品率。
它采用高频电力电子技术，并由高性能的微处理器进行控制，为电机提供了高效率、无噪音的操作性能，减少了马达和电池的损耗。
通过手持式编程器或计算机（USB接口）可以直观方便的对各种参数进行设置，以满足各种地形对车辆操控性能的要求。
应用IPMC2509系列控制器广泛应用于电动游览车、电动轿车、载重型电动货车、电动游艇等车辆。
型号参数VOLTAGE ARM CUR STYLE (V) (A)3 minutes48 40040050072 40072 450外形尺寸（mm）典型接线图1415 ipMC259-724inPower3－Red 12V+4 －Black 12V-5 －Green Signal6 －Yellow Switch Key Switch1 －Red Power+2 －Yellow Key Switch Input3－Pink 12V+4 －Black 12V-5 －Blue Signal6－Orange Switch of Pedal7 －Green Forward Direction8 －Brown Reverse Direction14故障列表（听到“滴”声）故障代码输出声音可能的故障原因0 没有声音目前没有错误或者控制器没有工作1 1长1短无2 1长2短电机电枢短路或者过电流3 1长3短主接触器线圈短路或者过电流4 1长4短加速器故障5 1长5短主接触器粘连6 1长6短主接触器丢失7 1长7短电机磁场线圈开路8 1长8短温度过高9 1长9短电池电压过高10 1长10短方向开关故障11 1长11短预充电故障或M-故障12 1长12短温度过低13 1长13短充电器未断开14 1长14短电机温度过高15 1长15短电池电压过低16 1长16短定子温度过高17 1长1长传感器故障18 警报长鸣高踏板禁止MC2509与升级前相比的优势：1.更小安装尺寸，宽度不变，长度由330减小为268，减小18%；厚度由130减小为86，减小33%；2.更小重量，重量由8.4kg减小为4kg，减小52%；3.更长时间过载能力，最大电流过载时间提高50%；4.更安全，双CPU数字防死机飞车；5.更高集成度，主接触器、换向接触器全内置，更高可靠性；6.更低接触器故障率，采用冗余设计；7.更高防水等级，由IP64提升为IP66；8.更人性化，可选的语音提示报警；9.更好的生产工艺，保证高的可靠性，低的故障率；10.更多人机交互信息，升级的通讯协议与第五代他励控制器完全兼容；。
McKesson 辅助运动器说明书
WheelchairsMcKesson wheelchairs are ideal for patients who have difficulty walking due to illness, injury or disability. McKesson offers a comprehensive selection of wheelchairs that promote patient independence, improve mobility and enhance quality of life. With durable construction, easy-to-adjust footrests and lightweight, easy-to-clean upholstery, McKesson wheelchairs provide long-lasting performance and comfort. Dual axle options provide easy transitions to hemi-level seat height to allow users to propel the wheelchair with their feet. Choose a McKesson wheelchair based on arm style, footrest preferences, reclining options, size and weight capacity.Features and BenefitsStandard Wheelchairs• Carbon steel frame with a textured, silver-vein finish for enhanced visual appeal and ease of maintenance • Embossed vinyl upholstery is durable, lightweight, attractive and easy-to-clean• Urethane tires are mounted on composite wheels to provide durability and a smooth ride over most surfaces • 8-inch front casters are adjustable in three positions • Convenient carry pouch for transporting personal items •Not made with natural rubber latexLightweight Wheelchairs• Carbon steel frame with a textured, silver-vein finish for enhanced visual appeal and ease of maintenance • Nylon upholstery is lightweight, and breathable for user's lasting comfort• Urethane tires are mounted on mag-style, composite wheels to provide durability and a smooth ride over most surfaces • Precision-sealed wheel bearings in front and rear ensure long-lasting performance and reliability• 8-inch front caster wheels provide a smooth ride over most surfaces • Flipback attachable armrests for patient comfort and easy transfer •Not made with natural rubber latexThe product information contained in this document, including the product images and additional product materials, was collected from various supplier sources. All product claims and specifications are those of the product suppliers and have not been independently verified by McKesson Medical-Surgical or its affiliates (“McKesson”). McKesson is not responsible for errors or omissions in the product information.The properties of a product may change or be inaccurate following the posting or printing of the product information in the document, either in the print or online version. Caution should be exercised when using or purchasing any products from McKesson’s online or print documents by closely examining the product packaging and the labeling prior to use.Due to product changes, information listed in this document is subject to change without notice. This information is placed solely for your convenience in ordering and McKesson disclaims all responsibility for its completeness and accuracy, whether or not the inaccuracy or incompleteness is due to fault or error by McKesson.© 2018 McKesson Medical-Surgical Inc.If you are not completely satisfied with any McKesson Brands product, you may return it for a full refund or credit.With McKesson Brands, you’ll never have to compromise. We deliver quality products at competitive prices, backed by our 100% satisfaction guarantee. We have decades of experience in the market, and we offer you support and work to help ensure you have the products you need, when you need them— making it even easier for you to provide the best care for your patients.Never Compromise on CareSMWheelchairsFeatures and BenefitsHeavy-Duty Wheelchairs• Increased height, width and durable steel constuction yields heavy-duty chair ideal for bariatric use• 450 lb weight capacity• Carbon steel frame with a triple-coated chrome finish provides for an attractive, chip-proof appearance• Double-embossed vinyl upholstery is durable, lightweight, attractive and easy-to-clean• Urethane tires are mounted on composite wheels to provide durability and a smooth ride over most surfaces • Precision-sealed wheel bearings in front and rear ensure long-lasting performance and reliability• Push-to-lock wheel locks• Not made with natural rubber latexReclining Wheelchairs• Hydraulic reclining mechanism allows for adjustments up to 180°• Carbon steel frame with a textured, silver-vein finish for enhanced visual appeal and ease of maintenance• Nylon upholstery is lightweight, and breathable for user's lasting comfort• Urethane tires are mounted on composite wheels to provide durability and a smooth ride over most surfaces • Precision sealed wheel bearings in front and rear ensure long-lasting performance and reliability• Single axle design• Designed with wheels set back on frame and rear anti-tippers to prevent toppling• Includes headrest extension with cushioned head immobilizer• Not made with natural rubber latexWARNING: This product can expose you to styrene, which is known to the State of California to cause cancer. For more information, go to .。
英搏尔MC说明书
英搏尔MC说明书MC1568系列他励电机控制器特点高频电力电子技术为电机提供了平滑、无噪音、高效的运行性能。
? 可调节的参数使得客户可优化参数、调节车辆操纵性能，满足不同路况和各种使用环境的要求。
? 刹车能量高效回收。
下坡行驶时，具有下坡限速功能，防止车辆超速，提高了安全性能。
? 上坡行驶时，防倒滑功能提高了安全性能和车辆控制性能。
可选的电磁驻刹控制蜂鸣器提示各种故障，方便检修。
? 确定调节参数，测试和诊断。
? 全面的故障检测和保护功能主接触器粘连检测驱动器过流检测 ? 加速器故障检测磁场线圈开路或者短路检测及保护? 电枢线圈开路或者短路检测及保护 ? 过温检测及输出功率衰减 ? 电枢驱动电路故障使用编程器可以监视系统的各种运行参数电池电压 ? 加速器输入幅值方向开关和加速器开关状态? 励磁电流和电枢电流? 控制器散热器温度值 ? 加速率和减速率工作环境温度：-30~℃+50℃ ? 存储环境温度：-40~℃+80℃ ?防护等级：IP66控制器效率：>98%@满载 ? 绝缘等级：1000V 兆欧表>20M Ω简介MC1568系列他励电机控制器可以为电机提供平滑的无极调速控制和正反转控制，不仅让电机拥有与串励电机相媲美的低速大扭距及高速性能，同时可以实现电机的能量回馈制动，使刹车能量高效回收，增加续驶里程，提高车辆的操控性能和安全性能。
它采用高频电力电子技术，并由高性能的微处理器进行控制，为电机提供了高效率、无噪音的操作性能，减少了马达和电池的损耗。
通过手持式编程器或计算机（USB 接口）可以直观方便的对各种参数进行设置，以满足各种地形对车辆操控性能的要求。
应用MC1568系列控制器广泛应用于高尔夫球车、电动游览车、电动打猎车、载重型电动货车等车辆。
型号参数VOLTAGE ARM CUR FLD CUR STYLE (V) (A) (A)2 minutes 5 minutesMC1568- 4840 48 400 40MC1568- 4850 48 500 50MC1568- 6040 60 400 40MC1568- 6050 60 500 50MC1568- 7240 72 400 40MC1568- 7250 72 500 50 外形尺寸（mm）注：对于不好更改安装尺寸的，可以选配转换支架。
Whirlpool 电器产品说明书
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
G. Model/serial number plate (located on the right-hand side oven door trim)
*Range can be raised approximately 1" (2.5 cm) by adjusting the leveling legs.
see NOTE*.
Cabinet opening dimensions shown are for 25” (64 cm) countertop depth, 24” (61 cm) base cabinet depth and 36” (91.4 cm) countertop height.
18" (45.7 cm) upper cabinet to countertop
from either cabinet, 7" (17.8 cm) max. from floor
Cabinet door or hinge
should not extend into the cutout.
13" (33 cm)
upper cabinet
depthC
18" (45.7 cm) upper cabinet to countertop
D 30" (76.2 cm)
Philips In-ear Wireless Sports 心率监测耳机 TAA4205BK 说明
PhilipsIn-ear wireless sports headphonesBuilt-in heart-rate monitor 6 hours play timeSecure fitIPX5 waterproof anf sweatproof TAA4205BK Train smarter. In any weather. Get the most out of your training with these waterproof sports headphones. The heart-rate monitor helps you find your intensity, and energizing sound keeps you going. You can track your progress on the Philips Headphones app.Sports headphones with heart-rate monitor•Train smarter. Heart-rate monitor built in•Energizing sound. 6 hours play time when monitoring•Quick Charge. Charge for 15 minutes, train an extra hour•Philips Headphones app. Custom sound controlClear sound, deep bass, easy control•Powerful 10 mm neodymium drivers•Rock-solid Bluetooth connectivity. Easy control•Built-in mic. Clear calls•Easily wake your phone's voice assistantFrom the gym to the street•IPX5 waterproof. Waterproof and sweat-proof•The fit you want. Ear hooks and wing tips included•3 interchangeable silicone ear-tip covers•Kevlar cable. Sits comfortably behind your neckIssue date 2023-02-16Version: 4.0.312 NC: 8670 001 68253EAN: 48 95229 11046 5© 2023 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective SpecificationsIn-ear wireless sports headphones Built-in heart-rate monitor 6 hours play time, Secure fit, IPX5 waterproof anf sweatproof Highlights Heart-rate monitor built in Track your heart rate with the built-in monitor. A sensor in the earbud tracks your heartbeat with precision. You'll know when to push it and when to rest. Compatible with open fitness-tracking apps such as Strava and Runkeeper, and the Philips Headphones app.Energizing sound Run faster. Jump higher. Kick harder. You get clear sound, punchy bass, and 6 hours play time-even when monitoring your heart rate. A single charge takes 2 hours via USB-C, and a speedy 15-minute charge gives you another hour of play time.Ear hooks and wing tips Go with the flexible wing tips made from silicone that fit securely under the ridge of your ear. Or opt for the ear hooks that fit comfortably over your ear. A choice of ear-tip covers that let you create the perfect in-ear seal.Philips Headphones app You can use the Philips Headphones app to track your heart rate while working out. Or use the app to adjust the sound of the music or podcasts you're listening to. Enhance the bass, tone down the treble, or choose from preset sound styles.IPX5 waterproof.These sports headphones boast an IPX5 soak-proof rating, which means they're resistant to sustained soaking. Sweat hard, train in the rain, or even wear them in the shower.A stable connectivity A stable Bluetooth connection ensures there's no dropping beats when you're out on a run. The multi-function button lets you pause playlists, take calls, adjust the volume, or wake your phone's voice assistant.Sound •Impedance:16Ohm •Speaker diameter: 10 mm •Sensitivity: 98 dB +/-3dB (1k Hz)•Maximum power input: 5 mW •Driver type: Dynamic •Frequency range: 20 - 20,000 HzConnectivity •Bluetooth version: 5.0•Maximum range: Up to 10 m •Bluetooth profiles: A2DP, AVRCP, HFP •Microphone: Built-in microphone •Type of wireless transmission: Bluetooth •WirelessConvenience •Philips Headphones app support •Water resistance: IPX5•Heart rate monitoring •Type of controls: Button •Volume controlDesign •Color:Black •Wearing style: In-ear •Ear coupling material: Silicone •Ear fitting: In-ear •In-ear fitting type: Earhook, Silicone ear tipPower •Music play time: 6 hr •Talk time:8hr •Battery type(Headphones): Lithium Polymer (built-in)•Battery capacity(Headphones): 140 mAh •Battery life standby time: 160 hr •Charging time: 2 hr •Fast charging time: 15mins for 1 hr •Number of batteries: 1 pcs •Battery weight (Total): 3 g •RechargeableAccessories •Charging cable: USB-C cable •Eartips: 3 pairs (S/M/L)•Detachable wing tips: 1 pair •Quick Start Guide Inner Carton •Number of consumer packagings: 3•Inner carton (L x W x H): 12 x 10.5 x 16.7 cm •Gross weight: 0.37 kg •Nett weight: 0.144 kg •Tare weight: 0.226 kg •GTIN: 2 48 95229 11046 9Outer Carton •Number of consumer packagings: 24•Outer carton (L x W x H): 43 x 24.8 x 18 cm •Gross weight: 3.24 kg •Nett weight: 1.152 kg •Tare weight: 2.088 kg •GTIN: 1 48 95229 11046 2Product dimensions •Product dimensions (W x H x D): 5 x 5.9 x 2.8 cm •Weight: 0.022 kg Packaging dimensions •Packaging type: Box •Number of products included: 1•Type of shelf placement: Hanging •Packaging dimensions (W x H x D): 9.5 x 17.5 x 3.5 cm •Gross weight: 0.102 kg •Nett weight: 0.048 kg •Tare weight: 0.054 kg •EAN: 48 95229 11046 5UPC •UPC: 8 40063 20129 3*Actual results may vary。
Philips 声音棒2.1与无线低频器 说明书
PhilipsSoundbar 2.1 with wireless subwoofer2.1 CH wireless subwoofer HDMI ARCDolby Audio300WTAB7305Power to your movies.Or your music.Be in the heart of the action. This powerful 300 W soundbar with wireless subwoofer and Dolby audio gives you full, rich sound and crisp dialogue. From blockbuster action to must-see shows, you’ll hear more. Love more.Bigger TV sound•300 W output. Powerful sound•2.1 channels. Wireless subwoofer for deeper bass•Dolby Audio. Be in the heart of the action•Robust metal grille for clear soundMusic and movies•Connect your favorite sources for bigger sound•Audio-in. Optical in. Bluetooth. USB•HDMI ARC. Control the soundbar with your TV remoteSee it. Hear it. Love it.•Distinctive geometric design. Easy placement•Wall brackets included•Soundbar dimensions: 800x95x64.7 mm•Subwoofer dimensions: 380x280x190 mmIssue date 2022-05-08Version: 6.0.212 NC: 8670 001 73269EAN: 48 95229 11638 2© 2022 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective SpecificationsSoundbar 2.1 with wireless subwoofer 2.1 CH wireless subwoofer HDMI ARC, Dolby Audio, 300W Highlights 2.1 channels 2.1 channels bring richer, deeper, clearer sound to your favorite movies and shows. The compact wireless subwoofer delivers rich bass. While two midrange drivers and two tweeters combine to deliver beautifully balanced sound with crisp dialogue.300 W output. Powerful sound The roar of explosions. Iconic soundtracks. With 300 W of pure power, this soundbar and wireless subwoofer will make music and effects sound much bigger. You'll hear more detail in quieter moments and action scenes will blow you away.Dolby Audio Be immersed in your favorite shows and movies. This soundbar with wireless subwoofer supports the Dolby Digital Plus format for a more expansive and involving experience. Voices will be clearer. Effects will be more impressive.Distinctive geometric design This soundbar boasts a unique slanted design and a low profile. When it comes to placement, the included wall brackets keep your options open. The compact design of the powerful subwoofer makes it easy to conceal.HDMI ARC The days of hunting for multiple remotes are over. This soundbar connects to your TV via HDMI ARC, allowing you to control soundbar volume with the same remote you use for your TV.Connect your favorite source Stream playlists from your mobile device via Bluetooth. Connect audio sources via audio-in, optical input, or USB. Whatever you love, it will sound great through this soundbar.Loudspeakers •Number of sound channels: 2.1•Front drivers: 2 middle range (L+R), 2 tweeters (L+R)•Subwoofer type: Active, Wireless subwoofer •External subwoofer enclosure: Bass reflex •Number of woofers: 1•Woofer diameter: 6.5"Connectivity •Wireless speaker connection: Subwoofer •Bluetooth: Receiver •Bluetooth version: 4.2•Bluetooth profiles: A2DP, AVRCP •Optical input x 1•HDMI Out (ARC)x 1•EasyLink (HDMI-CEC)•USB playback •Audio in: 1x 3.5mm •Subwoofer out:No •Multiple speaker connection: No •Smart Home: None •DLNA Standard:NoSound •Speaker system output power: 300W max / 236W RMS (10 % THD)•Total harmonic distortion: 10%Supported Audio Formats •HDMI ARC: Dolby Digital, Dolby Digital plus, LPCM 2ch •Optical: Dolby Digital, LPCM 2ch •Bluetooth:SBC •USB: MP3, WAV, WMA, FLAC, OGGVideo •3D pass-through:NoConvenience •EasyLink (HDMI-CEC): Audio Return Channel, Automatic audio input mapping, One touch standby •Night mode: No •Remote ControlCompatibility •Smartphone/tablet APP control: No Design •Color: Black •Wall mountable Power •Auto standby •Main unit power supply: 100-240V AC, 50/60 Hz •Main unit power consumption: 84 W •Subwoofer power supply: 100-240V AC, 50/60 Hz •Subwoofer power consumption: 117 W •Standby power consumption: < 2W Accessories •Included accessories: 1 x CR2025 Battery, Remote Control, Power cord, Wall mount bracket, Quick start guide, World Wide Warranty leaflet Dimensions •Main Unit (W x H x D): 800 x 95 x 64.7 mm •Main Unit Weight: 2.27 kg •Subwoofer (W x H x D): 380 x 280 x 190 mm •Subwoofer Weight: 7.57 kg Packaging dimensions •EAN: 48 95229 11638 2•Packaging dimensions (W x H x D): 87.5 x 23 x 42.5 cm •Gross weight: 12.81 kg •Nett weight: 10.09 kg •Number of products included: 1•Packaging type: Box •Tare weight: 2.72 kg Outer Carton •GTIN: 1 48 95229 11638 9•Number of consumer packagings: 2•Outer carton (L x W x H): 89.8 x 56.5 x 26 cm •Gross weight: 27.4 kg •Nett weight: 20.18 kg •Tare weight: 7.22 kg。
Whirlpool 121-Bottle Dual Zone Wine Cellar 产品说明书
121-Bottle Dual Zone Wine CellarINSTRUCTION MANUALPLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING AND OPERATING.For More Information About The Operation Of This Product, Please Reference Pages 8 & 9 Of This Manual.TABLE OF CONTENTSChapter Contents Page #Part I. Diagram & Description of Wine Cellar 3Part II. Important Safety & Pre-Use Instructions 4Part III. Installation Instructions(a) General Installation Instructions 4(b) Installation of Built-In Unit 5(c) Reversing Door Swing 6(d) Installing Venting Grille 7Part IV. Operating Your Wine Cellar 8Part V. Temperature Settings 9Part VI. Layout & Storage 10Part VII. Removing the Rolling Shelf 11Part VIII. Care & Maintenance 12Part IX. Troubleshooting Guide 13Part X. Technical Information 14Part XI. Warranty Information 14PART I. DIAGRAM & DESCRIPTION OF WINE CELLARYOUR WINE CELLAR ALSO INCLUDES THE FOLLOWING: ∙Instruction manual∙11 rolling shelves∙Two (2) keys∙Top and bottom hinges/screws (for changing the door hinge)PART II: IMPORTANT SAFETY INSTRUCTIONSBEFORE USING YOUR WINE CELLAR●Remove the exterior and interior packaging.●Before connecting the wine cellar to the power source, let it stand upright for approximately 24 hours. Thiswill reduce the possibility of a malfunction in the cooling system from handling during transportation.●Clean the interior surface with lukewarm water using a soft cloth.●Install the handle on the door. (see handle installation instructions in Part III (b).PART III. INSTALLATION INSTRUCTIONS(a) General Installation Instructions●This appliance is designed for both free standing and built-in (fully recessed) installation.●Place your wine cellar on a flat, solid floor that is strong enough to support it when it is fully loaded. To levelyour wine cellar, adjust the front leveling leg at the bottom of the wine cellar.●When moving your wine cellar, please do not incline it more than 45 degrees.●Locate the wine cellar away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Directsunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extremecold ambient temperatures may also cause the unit to perform improperly.●Avoid locating the unit in damp areas.●Plug the wine cellar into a dedicated (for this appliance only), properly installed and grounded wall outlet.Do not under any circumstances cut or remove the third (grounding) prong from the power cord. Anyquestions concerning power and/or electrical grounding should be directed to a certified electrician orauthorized product service center.(b) Installation of Unit as a Built-In CellarThe cutout dimension illustrated in figure (C) allows for door clearance and access to the pull-out shelves when installed as a built-in appliance.If installing between frameless cabinets,a ½” wide filler strip or side panel may be needed on hinge side. The filler strip will act as a spacer between the appliance case and adjacent cabinet door swing..Figure C(c) Reversing the Door Swing of Your ApplianceBefore you begin: Tape down shelves to avoid movement during the process∙The unit may have been delivered to you with the door opening from the left side (hinges on the right).∙The door of this appliance is can be hung to open on the left or right side. To reverse the door swing of your cooler and open from the opposite side, please follow the instructions and diagram below: ∙Locate the extra set of hinges in the plastic bag containing the instruction manual(d) Installing the Venting GrilleLift the panel into position in the grille frame over center mounts, positioning side mounts into the slots. Use a Phillips screwdriver to screw all six (6) screws into the corresponding holes.Note: Each center mount accommodates 1 screw. Each side mount accommodates 2 screws.PART IV. O PERATING YOUR WINE CELLAREach wine cellar includes an operating panel on the front of the unit. This operating panel includes several features to operate and control the temperature of both the UPPER and LOWER zones of the wine cellar. The operating panel includes the following features:ON/OFF: Turns the wine cellar system on or off.UPPER ZONE:Adjusts and displays, via LED, the desired temperature (F) and the actual temperature (F) of the UPPER zone.LOWER ZONE: Adjusts and displays, via LED, the desired temperature (F) and the actual temperature (F) of the LOWER zone.LIGHT:Turns the interior wine cellar light on or off.SELECT:Allows user to select control of the UPPER or LOWER zone.BEFORE YOU START: The wine cellar should be placed in a location where the ambient temperature is between 45-80 degrees Fahrenheit. If the ambient temperature is above or below this range, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate.SETTING THE TEMPERATURE CONTROLNOTE: TEMP SET indicates selected preferred temperature. DISPLAY indicates current temperatureIMPORTANT: IN ORDER FOR THIS UNIT TO FUNCTION AT OPTIMUM LEVEL, THE LOWER COMPARTMENT SHOULD BE SET AT LEAST 4-DEGREES (F) HIGHER THAN THE UPPER COMPARTMENT.1. Make sure power cord is connected to a properly grounded outlet.2. Turn power ON.3. Press the “SELECT” button to choose the “UPPER” or “LOWER” zone. Each zone is independently controlled.∙Upper Zone: The temperature setting can be adjusted from 41°F to 50°F∙Lower Zone: The temperature setting can be adjusted from 50°F to 64°F4. Set the desired temperature of the UPPER or LOWER zone pushing the UP ( ) or DOWN ( ) button.5. Temperatures increase or decrease 1°F with each push of the UP ( or DOWN ( ) button.6. NOTE: Temperatures may fluctuate depending on whether the interior light is ON or OFF and depending on theposition of the bottles.PART V. TEMPERATURE SETTINGS FOR SERVING WINE1. Although optimal storage temperature is generally regarded to be 53-57°F, different varietals of wine requiredifferent temperature settings. The recommended temperature ranges for serving different varietals of wine are listed below. Your wine cellar will indicate when you have set the Upper/Lower zones to the below temperature ranges.∙Red Wines: 64-68°F∙White Wines 44-52°F∙Sparkling Wines 42-45°F2. If you set the LOWER zone between 59 - 64°F, the LED light next to “RED” will light up, indicating that you arewithin the recommended range for serving Red Wines.3. If you set the UPPER or LOWER zone between 48 - 58°F, the LED light next to “WHITE” will light up, indicatingthat you are within the recommended range for serving White Wines.4. If you set the UPPER zone between 41 - 47°F, the LED light next to “SPARKLING” will light up, indicating thatyou are within the recommended range for serving Sparkling WinesNOTE:●In the event of a power interruption, all previous temperature settings will automatically be saved, and eachcompartment will return to the previous temperature setting.●If the unit is unplugged, loses power, or is turned off, you must wait 3 to 5 minutes before restarting.Attempting to restart the wine cellar before this time has elapsed may prevent the wine cellar from starting.●When you use the wine cellar for the first time or restart the wine cellar after having been shut off for a long time,there will be a few degrees variance between the temperature you select and the one indicated on the LED readout for the first few hours of operation. After a few hours of operation, the temperature will normalize to the displayed temperature.DOOR LOCK●This unit comes with an optional key lock.●The keys are located inside the plastic bag that contains the user manual. To unlock the door, insert the key intothe lock and turn counterclockwise.●To lock the door, simply reverse the operation making sure the metal pin is engaged completely. Then removethe key and place it is a secure place for safekeeping.PART VI. LAYOUT AND STORAGEYour cabinet was designed to store a maximum number of bottles securely. We recommend that you observe the tips below to optimize loading.∙Remove tape from shelves once unit is stable and ready for storage.∙Disperse the bottles evenly to avoid concentrating weight in one place. Bottles must not touch either the back of the cabinet or the step at the bottom.∙Make sure that the bottles are not all grouped together either at the top or bottom of the cabinet.∙Only pull out one rolling shelf at a time. Never attempt to pull more than one.∙Maximum weight capacity per shelf is 55 lbs.∙Each rolling shelf is designed to comfortably hold one row of 11 bottles as indicated in the diagram below. You can also fit 5 bottles on the bottom of the cabinet itself.PLEASE NOTEBefore modifying your cabinet’s original configuration in any way, be sure to ask your dealer for advice.PART VII. REMOVING THE ROLLING SHELFTo remove a rolling shelf:1. Remove all bottles.2. Pull the shelf out as far as it will go.3. Push the left side lever downward while pushing the right side lever upwards (as illustrated on page 10).4. Remove the shelf.PART VIII. CARE AND MAINTENANCECleaning Your Wine Cellar.●Turn off the power, unplug the appliance, and remove all items including all shelves.●Wash the inside surfaces with a solution of warm water and baking soda (approximately 2 tablespoons of bakingsoda for each quart of water.)●Wash the shelves with a mild detergent solution.●Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.●Wash the outside of the cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean softcloth.●Dust the front grill and back of the unit twice yearly. Make sure the power is off before cleaning.●It is recommended to clean the unit completely inside and out once a year to maximize the longevity of the winecellar.Power Failure●Power failures that are corrected within a few hours should not affect the temperature of your appliance if youminimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take other measures to protect your contents.Absence/Vacation●Short vacations: You may leave the wine cellar powered on and unattended for absences of less than three (3)weeks.●Long vacations: If the appliance will not be used for more than three weeks, remove all items and turn off theappliance. Clean and dry the interior thoroughly. To prevent mold growth, leave the door open slightly, blocking it open if necessary.Moving Your Wine Cellar●Remove all items.●Securely tape down all loose items (shelves) inside your appliance.●Turn the adjustable leg up to the base to avoid damage.●Tape the door shut.●Be sure the appliance stays secure in the upright position during transportation. Also protect the outside of theappliance with a blanket or similar item.Energy saving Tips●The wine cellar should be located in the coolest area of the room, away from heat producing appliances, and awayfrom direct sunlight.PART IX. TROUBLESHOOTING GUIDEMany common issues with your wine cellar can be solved very easily. Try the troubleshooting tips below should you experience any problems.PART X. TECHNICAL DATAPART XI. WARRANTY INFORMATIONPlease speak to your retailer before calling Wine Enthusiast if you did not purchase your wine cellar directly from Wine Enthusiast.Limited warranty– 90-day replacement plan with a free 9-month upgrade, totaling 1 year, on parts and labor from the date of shipment. For customer service, please contact Wine Enthusiast by e-mail (***************************) or by phone (800.648.6058).The limited warranty does not cover: Damage due to such things as accident, misuse, abuse, mishandling, neglect, unauthorized repair or any other cause beyond the control of the seller whether similar or dissimilar to the foregoing. Purchaser understands and acknowledges that the goods sold here are wine refrigerators, which house wine. Purchaser assumes all the risk of using these units, including risk of spoilage, humidity variations, temperature variations, leaks, fires, water damage, mold, mildew, dryness and similar perils that may occur.。
MC说明书
珠海英搏尔电气股份有限公司产品型号MC3623-6015编号版本V1.0制定部门研发中心制定日期2016/8/12页次1一、范围本规格书描述了由珠海英搏尔电气股份有限公司生产的MC3623系列低压交流控制器的主要参数和性能要求、功能要求及使用说明等。
请在使用前仔细阅读。
二、参照标准2.1GB/T18488.2-2006.4.10外壳强度2.2GB/T18488.2-2006.5.9绝缘电阻2.3GB/T18488.2-2006.5.1定频震动和扫频2.4GB/T18488.2-2006.5.4温升限值2.5GB/T18488.2-2006.5.20噪声2.6GB/T2423.2-2008高低温存储三、主要技术参数3.1技术规格项目测试条件及方法最小值典型值最大值单位电压使用范围在测功机测试系统，处于空载状态下运行506075V欠压保护电压值按照额定电池电压的87.5%52V 使用环境恒温箱模拟工作环境温度要求-3055℃限流值在测功机测试系统，自动加载至控制器最大的电流210A电机额定功率指该控制器安全匹配电机的额定功率2kW绝缘电阻控制器功率线与机壳之间的绝缘电阻在DC1000V电压下高于20MΩOK过流保护将U V W任意两项短连，测试过流保护OK调速手把输出调速电压接上调速手把和电机霍尔，用万用表测量（手把供电为5V）0.84V信号线材0.5mm²国标线0.5mm噪声在测功机测试系统，自动加载至控制器最大的电流OK产品型号MC3623-6015编号版本V1.0制定部门研发中心制定日期2016/8/12页次2四、控制器的外形尺寸及外观4.1外形尺寸参见附件图1-14.2外观控制器表面清洁，无明显的划痕及机械损伤，无变形，无影响控制器价值的其他外观缺陷。
五、性能5.1性能试验要求项目验证结果要求高温55℃条件下保持连续工作空载2小时，检测运行情况，再取出测试绝缘阻值。
额定电压下空载和带载启动正常恒定湿热低温-40℃存储24小时，进行测功工装测试。
MCL 60 E robot coupe 产品说明书
66
1 1 8 5 2 9 SUPPORT MECANIQUE
67
2 0 3 1 0 4 VIS D’APPUI
68
5 0 0 8 4 5 COURROIE 670 5M 25
69
2 9 0 5 8 ENS BAGUE EPAULEES (Qté=2)
70
3 9 3 1 8 BAC GASTRONOME 1/4
71
4 9 1 7 6 MOLETTE PIED REGLABLE
72
4 9 1 7 7 MECANISME PIED REGLABLE
73
4 9 1 7 8 PIED CAOUTCHOUC REGLABLE
Index
Désignation
A
PLATINE
M
MOTEUR
Machine 2310 / 2313 / 2319 / 2325 / 2332 2335 / 2314 / 2320 / 2326 / 2338 2334 / 2315 / 2321 / 2327 / 2337
60
2 9 9 0 8 ENS. ROULETTE
61
1 1 8 5 6 6 AXE ROULETTE (Qté=1)
62
1 1 8 5 6 7 RESSORT ROULETTE
63
1 1 8 5 6 5 ROULETTE
64
2 0 3 1 6 4 CLAVETTE 6x6x25
65
1 0 0 8 6 9 POULIE MOTRICE
2336 2316 / 2322 / 2328
Voltage 400/50/3 380/60/3 220/60/3 200/50-60/3 230/400/50/3
CMC 72HD+ARBOR PRO 详细技术规格说明书
ARBOR PRO• Radio remote control storage box and built in batterycharger for radio remote lithium batteries•Automatic outrigger self-leveling• Black rubber tracks (set)•Horizontal hydraulically adjustable tracks 34” - 50”• Kubota Z602 diesel, 16.8 HP , vertical 4-Cycle liquid cooled diesel•12V Battery backup electric pump(intermittently use the 12v battery to operate all functions)•Removable single man aluminum basket with rounded outer corners for better versatility. Size is 31.5” L x 27.5” W x 43.3” H Optional: Removable two man aluminum basket with rounded corners. Size is 55” L x 27.5” W x 43.3” H in lieu of the two man basket at no charge. Optional single man or two man fi berglass basket listed in options below • 180° Basket rotation (+/- 90° each way)•Ability to raise basket & jib up out of the way while driving the tracks• 1 & 3 years warranty. 1 yr “bumper to bumper” and 3 yrs on certain components. Unlimited use hours •Detailed owners maintenance and use manual, including parts and service diagrams• Four (4) specially designed sliding outrigger pads •One (1) Fall arrest safety harness• Ability to setup on up to 27° or 50% grade• Automatic outrigger leveling, with individual manual hydraulic override controls• 4 hydraulic outriggers with the ability to vary the positioning based on work zone requirements: Wide, narrow, wide and narrow.• Waterproof safety switches placed in well protected positions• Dual lock valves on all hydraulic cylinders•Outrigger feet with articulating pad made of special anti-slip polymetric plastic to ensure safety• 72’ working height• Up to 41’ of lateral side reach • Sold single lower pantograph• Upper boom with three telescopic extensions • 710° non-continuous turret rotation• Hydraulic hoses and control cables inside booms for complete protection, with easy service access • T elescoping boom sections with hydraulic cylinders and leaf drive chains • 90° independently articulating jib •Radio remote control and fi xed platform control stationaerial |OTHER|outriggers|CHASSIS|TRACKS |POWER |STANDARDSTANDARDSTANDARDSTANDARDSTANDARDSTANDARDplatform |STANDARDlithium ion batteries hydraulic tool outletnon-marking tracksCustom paint colorsOPTIONALOPTIONALOPTIONALOPTIONALother |chassis |tracks |power |• Hydraulic T ool Outlet in basket• High pressure air/water hoses routed internally from the ground to the basket - 2900PSI• 120V Electric outlet in basket with extension cord through the booms• Removable single man made in USA 24” x 24” fi berglass basket equipped with basket quick connect bracket, replacing the standard basket • Removable two man made in USA 24” x 48” fi berglass basket equipped with basket quick connect bracket, replacing the standard basket •Removable two man aluminum basketwith basket quick connect bracket. Size is 55” long x 27.5” wide x 43.3” high• Biodegradable hydraulic fl uid (non-toxic, natural fl uid. For extreme cold or sensitive locations)•Ratchet straps (each. 4 are already included)• Additional fall arrest aerial lift harness and lanyard kit including storage bag • Double T ravel Speed• Specially designed outrigger pads (each) (4 are already included)•Set of 4 cavity outrigger pads• Non-marking grey tracks (replaces the standard black tracks)•T rack socks•Full lithium battery power (160a 48v) with built in electric charger (replaces Honda gasoline engine). Should be paired with option 0000110. Combustion engine is removed• Hybrid: Honda gas engine + 160ah lithium batteries •Auxiliary 120V 20A plug in electric motor with charger for 12V battery. This is not a battery system. With this system, you can plug the machine in and use it on 100% AC electric power . This is in addition to the combustion engine• T ravel alarm • Warning light• 1 Custom paint color: Choice of more than 200 colors. *No fl uorescent or metallic colors*•2 Custom paint colors: Choice of more than 200 colors. *No fl uorescent or metallic colors*OPTIONALPLATFORM STATION |technical specificationsPerformanceMaximum working height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72'Maximum side reach at 176 lbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41'Maximum side reach at 265 lbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38' 8”Maximum side reach at 507 lbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32’ 6”Maximum weight load with standard basket . . . . . . . . . . . . . . . . . . . . . . . . .507 lbsMaximum weight load (w/ singleman fi berglass basket) . . . . . . . . . . . . .350 lbsMoveable Jib articulating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90°Turret rotation range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+/- 710°Basket rotation range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+/- 90°Maximum slope to stabilize (deployment) . . . . . . . . . . . . . . . . . . . . . . . . . . .27° (50%)Height / Width tracks adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34" - 50”Maximum slope approach angle (front, engine) . . . . . . . . . . . . . . . . . . . . . .31° (58%)Maximum slope approach angle (rear, basket). . . . . . . . . . . . . . . . . . . . . . .28° (55%)Gradeability -- max. travel angle / slope* . . . . . . . . . . . . . . . . . . . . . . . . . . . .17° (30%)Maximum crawler travel speed** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0 - 1.5 ft/s*This is the standard setting. The standard setting can be overridden to: 31° (60.1%)**3 speeds: Slow, Slow with Torque, FastdimensionsBasket height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43”Basket width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27”Basket length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55”Total length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19’ 5”Length without basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17’ 9”Height in transport position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78”Total width (w/o basket, tracks in) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35”Total width (w/o basket, tracks extended) . . . . . . . . . . . . . . . . . . . . . . . . . . . .51”Free height from the ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7”Tracks (LxW). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69” x 10”Track extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34” - 50”Outrigger spread length in narrow position . . . . . . . . . . . . . . . . . . . . . . . . . .13’ 4”Outrigger spread width in narrow position . . . . . . . . . . . . . . . . . . . . . . . . . . .8’ 9”Outrigger spread length in wide position. . . . . . . . . . . . . . . . . . . . . . . . . . . . .11’ 6”Outrigger spread width in wide position . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11’ 6”Outrigger spread wide to narrow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10’Outrigger foot diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7”WEIGHTTotal weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6,614 lbsMaximum outrigger foot pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.07 kg/cm2 - 69.4 N/cm2 Maximum track pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(0.17 kg/cm2 - 1.67 N/cm2) Maximum pressure in travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 PSI (600 kg/m2 - 5.85 kN/m2) Maximum pressure in work (wide outrigger setup). . . . . . . . . . . . . . . . . . .214 kg/m2 - 2.1 kN/m2 Maximum pressure in work (narrow outrigger setup) . . . . . . . . . . . . . . . .234 kg/m2 - 2.3 kN/m2 PowerKubota Z602 diesel engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16.8 HP120V 20A plug in electric motor (optional)Lithium ion batteries (optional)*Technical specifi cations are non-binding, in some cases are approximate, and are subject to change.diagrams0000Gallery72HD+•***************************•(978)712-4950。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
MC1568系列他励电机控制器
特点
∙ 高频电力电子技术为电机提供了平滑、无噪音、高效的运行性能。
∙ 可调节的参数使得客户可优化参数、调节车辆操纵性能，满足不同路况和各种使用环境的要求。
∙ 刹车能量高效回收。
∙ 下坡行驶时，具有下坡限速功能，防止车辆超速，提高了安全性能。
∙ 上坡行驶时，防倒滑功能提高了安全性能和车辆控制性能。
∙ 可选的电磁驻刹控制
∙ 蜂鸣器提示各种故障，方便检修。
∙ 确定调节参数，测试和诊断。
∙ 全面的故障检测和保护功能
✓ 主接触器粘连检测驱动器过流检测 ✓ 加速器故障检测
✓ 磁场线圈开路或者短路检测及保护 ✓ 电枢线圈开路或者短路检测及保护 ✓ 过温检测及输出功率衰减 ✓ 电枢驱动电路故障
∙ 使用编程器可以监视系统的各种运行参数
✓ 电池电压 ✓ 加速器输入幅值
✓ 方向开关和加速器开关状态 ✓ 励磁电流和电枢电流 ✓ 控制器散热器温度值 ✓ 加速率和减速率
∙ 工作环境温度：-30~℃+50℃ ∙ 存储环境温度：-40~℃+80℃ ∙ 防护等级：IP66
∙ 控制器效率：>98%@满载 ∙ 绝缘等级：1000V 兆欧表 >20M Ω
简介
MC1568系列他励电机控制器可以为电机提供平滑的无极调速控制和正反转控制，不仅让电机拥有与串励电机相媲美的低速大扭距及高速性能，同时可以实现电机的能量回馈制动，使刹车能量高效回收，增加续驶里程，提高车辆的操控性能和安全性能。
它采用高频电力电子技术，并由高性能的微处理器进行控制，为电机提供了高效率、无噪音的操作性能，减少了马达和电池的损耗。
通过手持式编程器或计算机（USB 接口）可以直观方便的对各种参数进行设置，以满足各种地形对车辆操控性能的要求。
应用
MC1568系列控制器广泛应用于高尔夫球车、电动游览车、电动打猎车、载重型电动货车等车辆。
型号参数
VOLTAGE ARM CUR FLD CUR STYLE (V) (A) (A)
2 minutes 5 minutes
4840 48 400 40
4850 48 500 50
6040 60 400 40
6050 60 500 50
7240 72 400 40
7250 72 500 50 外形尺寸（mm）
注：对于不好更改安装尺寸的，可以选配转换支架。
典型接线图
F1
F2
电机定子
ipMC1568-7240
3－红色加速器电源正极线4 －黑色加速器电源负极线5 －兰色加速器信号线
6 －橙色加速器位置开关线
钥匙开关
1415
10－粉红色11－黄绿色12 －蓝白色13 －绿白色14－紫色15－白色
控制器故障代码
编程器
1 －灰色电机碳刷检测线2－红色控制电路电源线3－黄色钥匙开关输入线4－棕色后退信号线
磁场过流电枢过流主接触器过流加速器故障主接触器粘连主接触器丢失磁场线圈开路温度过高
F1
F2
ipMC1568-7240
3－红色加速器电源正极线4 －黑色加速器电源负极线5 －兰色加速器信号线
6 －橙色加速器位置开关线
钥匙开关
1 －红色控制电路电源线
2 －黄色钥匙开关输入线
3－粉色
加速器供电正极4
－黑色加速器供电负极
5
－蓝色
加速器信号6－橙色加速器开关信号7
－绿色前进信号线8 －棕色后退信号线9－灰色
碳刷检测线
1415
10－粉红色11－黄绿色12 －蓝白色13 －绿白色14－紫色15－白色
控制器故障代码
编程器
故障列表（听到“滴”声）
故障代码输出声音可能的故障原因
0 没有声音目前没有错误或者控制器没有工作
1 1长1短电机磁场短路或者过流
2 1长2短电机电枢短路或者过电流
3 1长3短主接触器线圈短路或者过电流
4 1长4短加速器故障
5 1长5短主接触器粘连
6 1长6短主接触器丢失
7 1长7短电机磁场线圈开路
8 1长8短温度过高
9 1长9短电池电压过高
10 1长10短方向开关故障
11 1长11短预充电故障或M-故障
12 1长12短温度过低
13 1长13短充电器未断开
14 1长14短电机温度过高
15 1长15短电池电压过低
16 1长16短定子温度过高
17 1长1长传感器故障
18 警报长鸣高踏板禁止
MC1568与MC1268相比的优势：
1.更小安装尺寸，宽度不变，长度减小30%，厚度减小20%；
2.更小重量，重量减小30%；
3.更长时间过载能力，最大过载时间提高50%；
4.更高扭矩输出，对于某些电机，扭矩提升5%；
5.更安全，双CPU数字防死机飞车；
6.更高集成度，接触器内置，更高可靠性；
7.更低接触器故障率，采用冗余设计；
8.更高防水等级，由IP64提升为IP66;
9.更人性化，可选的语音提示报警；。