MT6260 GPIO table_V1.0
Mediatek_Wireless_Roadmap-2013-12-27
Confidential BMediaTek Roadmap UpdateDecember/27/2013Copyright © MediaTek Inc. All rights reserved.Confidential BAgenda▪ WiFi Market Update ▪ WiFi Networking Roadmap ▪ Beyond WiFiCopyright © MediaTek Inc. All rights reserved.2013/12/27-2-Confidential BWiFi Market UpdateCopyright © MediaTek Inc. All rights reserved.Smart Phone Say Hello to 802.11acConfidential BHTC New OneSamsung S4Sony Xperia Z Ultra C6802MediaTek13’Feb13’Mar13’Jun14’Q1Copyright © MediaTek Inc. All rights reserved.2013/12/27-4-11n vs. 11ac Transition100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 2013 2014 20152013/12/27 5Confidential BN300 takes entry level positionAC750/AC1200 replace N600 and get growth momentumAC-4SS (DBC) AC-3SS (DBC) AC-2SS (DBC) AC-2SS (FE, DBC) AC-1SS (DBC) 3SS (DBC) 2SS (DBC) 3SS 2SS 1SS20162017Copyright © MediaTek Inc. All rights reserved.Source: ABI, In-Stat, Mediatek IntelligenceMarket Dynamic▪ Router SKU Transition– – – – – –Confidential BN300 replaced N150 as 11n entry level router 11ac DBC router replaced 11n DBC router (AC1200 $79) LTE Smart Phone drive 11ac and NFC demand Normal power router + repeater to extend coverage Router 2.0 - Internet router (public cloud) + home router (personal cloud) Deep Packet Inspection (DPI) becomes mandatory function in mid-/high-end router▪ Next Generation Hotspot (Passpoint R2) moves Wi-Fi to the heart of the carrier network ▪ Home Security & Automation– – – – – Cloud & App, +touch panel for control Surveillance: WiFi Cloud IPC Security: BT Door Lock Home Automation: +Zigbee/Sub-1G for sensor network Healthcare: +BTLE2013/12/27 -6-Copyright © MediaTek Inc. All rights reserved.Confidential BWiFi Networking RoadmapCopyright © MediaTek Inc. All rights reserved.Confidential BAgenda▪ Chip Roadmap ▪ MT7620 Highlights ▪ MT7620 11ac Solutions ▪ MT7621 11ac Solutions ▪ MT7612 11ac SolutionsCopyright © MediaTek Inc. All rights reserved.2013/12/27-8-11n Router RoadmapN600(GbE) N750(GbE) N900(GbE)RT6856 RT3593 RT3593 MT7530 • MIPS34KEc (700 MHz) • DDRI/DDRII, NAND/SPI • FE SW, 802.3az • USB2.0 (2), rGMII, PCIe (2) • IPSec Engine (140Mbps) • AES256-CBC • Storage AcceleratorCPUMPConfidential BMT7620ART3593 MT7530MT7620ART5592 MT7530• MT7530 GbE SW • 5p+2 rGMII • 802.3az EEE • Jumbo FrameN600MT7620ART5592MT7620AMT7530N300MT7620AMT7620N• • • • • • • • • •2x2 802.11n (300 Mbps) MIPS24KEc (580/600 MHz) SDR/DDRI/DDRII, NAND/SPI/SD-XC/eMMC FE SW, 802.3az USB, rGMII(2), PCIe 2Gbps HWNAT (IPv6) Storage Accelerator Lowest Power Consumption Best IOT w/ Intel6300 eCos IPv6 logo ready turnkey (2/8)MT762x• • • • • • • • • •2x2 802.11n (300 Mbps) MIPS24KEc (580 MHz) DDRI/DDRII, SPI/SD-XC/eMMC FE SW, 802.3az USB, PCIe AES128/256-CBC Calibration Free 5V/0.6A power adapter DRAM embedded ULC rBOM, PCBN300GMPQ1’14Q2’14Q3’14Q4’14Q1’15Q2’1511ac Router Roadmap• MIPS1004K dual-core (880MHz) • 256KB L2 • DDRII/DDRIII, NAND/SPI/SD-XC • GbE SW, 802.3az EEE • USB 3.0, USB 2.0, rGMII, PCIe (3) • IPSec Engine (> 400Mbps) • HWNAT(IPv6)+BW Control • Storage Accelerator • NFC: MT6605 • SATAIII(2): 3rd PCIeCPUMPConfidential BAC1750(GbE)MT7621AMT7605E MT7615EAC1200(GbE)MT7621AMT7612E MT7602EMT7602E • LDPC, Beamforming • 256QAMMT7621AMT7612E MT7603EAC1200MT7603E • ULC • MCC • Airtime Fairness • 802.11v, 802.11j • Samples: Q1 2014• 4x4/4SS, 11ac stage2 • LDPC, Beamforming, MU-MIMO • 802.11v, 802.11j • CPU offload • Samples: Q4 2014MT7620AMT7612E• iPA • LDPC, Beamforming • Calibration FreeAC750MT7620AMT7610E• BeamformeeMPQ1’14Q2’14Q3’14Q4’14Q1’15Q2’15Dongle RoadmapAC1300CPUMPConfidential BAC866MT7612U • USB 3.0 • LDPC, Beamforming • Calibration Free, iPAMT7662U • USB 3.0 • BT 4.0+HS, LDPC, Beamforming • Calibration Free, iPA • Linux, Android MT7650U • USB 2.0 • BT 4.0+HS • Beamformee • Linux, AndroidAC433MT7610U • USB 2.0 • BeamformeeN450RT3573N300RT5572 RT5372 • USB 2.0 • Calibration Free, SoftAP mode • QFN40-5x5 (Smallest) MT7670U • USB 2.0 • High Power MT7603U • USB 2.0 • Calibration Free • ULCN150MT7601U RT3070MPQ1’14Q2’14Q3’14Q4’14Q1’15Q2’15PCIe Roadmap>AC1300CPUMPConfidential BMT7615E • 4x4/4SS, 11ac stage2 • LDPC, Beamforming, MU-MIMOAC866MT7612E • LDPC, Beamforming • Calibration Free, iPAAC433MT7610E • BeamformeeN450RT3593 • Calibration Free • LDPC, Beamforming • 256QAM • Calibration Free • 802.11j, 802.11v • 64QAMN300RT5592/EP RT5392MT7602E • USB 2.0 • Calibration Free, SoftAP mode • QFN40-5x5 (Smallest)MT7603EN150MT7601U RT3070MPQ1’14Q2’14Q3’14Q4’14Q1’15Q2’15MT7621 VPN Performance (>400Mbps)Confidential BVPN TunnelLAN:10.10.10.254Encrypti on DES 3DES AES-128 AES-192 AES-256 3DES AES-128 AES-192 AES-256 Authentication SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 DH Group DH2 DH2 DH2 DH2 DH2 DH2 DH2 DH2 DH2 DH2 DH5 DH5 DH5 DH5 DH5 DH5 DH5 DH5NetScreen第一次 第二次 第三次503.963 415.579 450.942 552.657 597.048 546.626 507.185 588.509 422.110 380.032 457.272 455.986 444.925 332.600 448.310 422.465 423.996 505.989 507.322 504.105 421.491 549.283 399.405 395.676 382.091 510.567 398.124 381.551 540.925 508.904 360.313 562.598 420.892 473.680 420.030 472.003 510.725 476.088 517.963 512.740 380.029 502.125 454.674 420.783 557.360 478.124 421.747 552.370TCPTCPTCP平均449.617 465.0827 459.4313 509.5883 509.7547 523.999 474.851 498.975 394.7433 464.2413 436.69 419.44 514.4033 439.876 410.1233 512.4777Copyright © MediaTek Inc. All rights reserved.2013/12/27- 13 -MediaTek Technology RoadmapConfidential B20152014 {BBP} 1. BW 5/10 2. Airtime Fairness {MAC} 1. MCC 2. WiFi Positioning {SoC} KGD2013 {RF} DPD, 11ac iPA {BBP} LDPC, TxBF {MAC} STA-Proxy {SoC} HNAT+HQoS, VPN, Storage AcceleratorCopyright © MediaTek Inc. All rights reserved.{RF} 1. DPA 2. 4x4/4ss, 3. 11ac stage2 {BBP} 1. Smart Antenna v3 2. MU-MIMO2013/12/27- 14 -Software RoadmapReadyOpenWRT trunkOpenWRT (MT7620, 3.x)Confidential B2013 Q1 Q2 Q3 Q4 Q12014 Q2 Q3 Q42015 Q1 Q2●● OpenWRT(MT7620, 2.6.36)(RT5350, 3.x)● OpenWRT● OpenWRT(MT7621, 3.x)Linux SDK● SDK 4.1(MT7620, 2.6.36)● SDK 4.2(MT7621, 2.6.36)● SDK 5.0(Kernel 3.x)eCos OpenBSD● MT7620N/ ● MT7620NMT5350 SDK 2.4.1.4 (2/8M)● AC750 SDK2.4.3.0 (2/16M)● AC750 SDK2.4.5.0 (2/8M)eCos –IPv6 FreeBSD● MT7620N ● AC750 SDK3.0.3.0 (2/8M) - 15 2013/12/27IPv6 SDK 3.0.1.0 (2/16M)IPv6 SDK 3.0.2.0 (2/8M)● AC1200 SDK3.0.4.0 (2/8M)Copyright © MediaTek Inc. All rights reserved.Confidential BSDK 4.2 vs. 4.1 ComparisonSDK 4.1Kernel Chip 2.6.21 2.6.36 (RT6856, MT7620) RT3050, RT3052 RT3883, RT3662 RT3352, RT5350 RT6856, MT7620 GCC 3.4.2SDK 4.22.6.21 2.6.36 (RT6856, MT7620, MT7621) RT3050, RT3052 RT3883, RT3662 RT3352, RT5350 RT6856, MT7620 MT7621 GCC 4.6.3 (MT7621 default) (MT7620 option) uClibc 0.9.33.2 (MT7621 default) (MT7620 option) Fast path (MT7620, MT7621) Fast path (MT7620, MT7621) lighthttpd web server (BSD license) Linux 2.6.36 support 2.6.38 MT7620+MT7530 RT3883+MT7530 WM8960 YES (MT7621) 400Mbps (MT7621) YES xHCI (MT7621) Win8- 16 -DescriptionGccUser LibraryuClibc 0.9.28PPTP L2TP HTTP Server Layer7 QoS Openswan Gigabit Switch Audio DAC HQoS VPN SPDIF USB Windows certificationn/a n/a Go-ahead Linux 2.6.21 only 2.6.22 RT3883+Vitesse WM8750 n/a 150Mbps (RT6856) n/a EHCI (RT6856/MT7620) Vista/Win7MT720 performance gain ~120% MT7620 performance gain ~100% /QDMACopyright © MediaTek Inc. All rights reserved.2013/12/27Value Added SoftwareDPI +iQoS DPI +iQoS (Broadweb) CAPWAP user kernel driverConfidential BSamba, Airplay, Airprint, DLNA DMSVPN NTFS (Paragon) (MediaTek)NTFS (Paragon)Remote USBUSB Printer Audio StorageIPv6 HNAT HQoS (MediaTek)Storage Accelerator (MediaTek)VoW (MediaTek)Mesh (TerraNet)IP cam H.264 (AIT/Sonix) Audio DAC (WM8960)Copyright © MediaTek Inc. All rights reserved.2013/12/27- 17 -Confidential BAgendaChip Roadmap ▪ MT7620 Highlights ▪ MT7620 11ac Solutions ▪ MT7621 11ac Solutions ▪ MT7612 11ac SolutionsCopyright © MediaTek Inc. All rights reserved.2013/12/27- 18 -Confidential BMT7620A Functional Block3.3V 20/40MHz Crystal PMU 2.5/1.0V Clock/Timer/Reset/PLL DRAM Controller NAND/SD-XC/eMMC SPI RF FEM RF FEM MAC BBP UART Full+ UART Lite USB 2.0 Host/Device CTRL/PHY I2C PPE w/ IPv6 I2S PCM 2 3 4 External Interface TransformerSDRAM(512Mbits) DDR1(1Gbits) DDR2(2Gbits) NAND Flash(8Gbits) SPI Flash/Codec UART Interface USB 2.0 Interface EEPROM/Control Audio Interface Codec GPIO/LEDMIPS 24KEc (580/600 MHz) 64K I-Cache 32K D-Cache5G WiFi 2x2 11n: RT5592 2x2 11n: RT5592EP (HP) 3x3 11n: RT3593 1x1 11ac: MT7610ERGMIIPCIe Storage Accelerator Ethernet SwitchRGMII01Copyright © MediaTek Inc. All rights reserved.2013/12/27- 19 -MT7620 Highlights• Best DBC TP w/ Intel 6300 • Best TP w/ mutiSTAs • No. 1 HNAT in smallnetbuilder • First IPv6 HNATConfidential BBest DBC Throughput w/ Intel63002Gbps IPv6 HNATMT7620Lowest Power Consumption• Lowest power consumption • Thermal PK w/ E900USB 2.0 Samba Performance• Perform same performance w/ EA3500 and E4200v2Copyright © MediaTek Inc. All rights reserved.2013/12/27- 20 -HNAT (Chariot) Benchmarkipv6 HNATConfidential B2Gbps HNATOutperform in iPv6 benchmarkCopyright © MediaTek Inc. All rights reserved.2013/12/27- 21 -Confidential BPower Consumption BenchmarkD-LINK DIR-605L RTL8196C+ RTL8192CE 2.31 2.64 1.42 1.38 1.37MT7620NSDRTenda W308R BCM5357TP-LINK TL-WR841N AR9341Uplink Downlink STA associated STA unassociated Radio off1.80 2.18 1.03 0.83 0.613.42 4.41 2.88 2.79 2.072.632 3.290 2.444 2.350 2.068Copyright © MediaTek Inc. All rights reserved.2013/12/27- 22 -Confidential BDBC TP Benchmark (vs. Intel6300)Copyright © MediaTek Inc. All rights reserved.2013/12/27- 23 -Peak Throughput Benchmark APto1STA or APto2STAsConfidential BCopyright © MediaTek Inc. All rights reserved.2013/12/27- 24 -N300/600, AC750/1200(GbE) Solution▪ MT7620A (580MHz)– – – – – 2x2 11n 2.4GHz GbE LAN(4)+WAN USB 2.0, SD-XC, I2S DDR2, SPI Flash PCIe: 802.11 a/n/acMT7620AConfidential B1x1/2x2 11ac▪ MT7530– 5p GbE SwitchMT7530▪ 4L PCB, double sides▪ OS– Linux SDKCopyright © MediaTek Inc. All rights reserved.2013/12/27- 25 -Outdoor AP Solution (Industry Spec.)▪ MT7620A (580MHz)– – – – – 2x2 11n 2.4GHz GbE(2) USB 2.0, PoE DDR1, NAND Flash PCIe• •Confidential BrGMII iNIC802.11 a/n/ac 802.11ac iNICMT7620A– rGMIIPCIe 1x1/2x2 11ac▪ HW Spec.– 4L PCB, double sides – -40~85 degrees (Industry Spec.) – Tx PowerMCS0: 26.8dbm per chain • Over temperature: +- 1dbm•PoE▪ OS– Linux SDKCopyright © MediaTek Inc. All rights reserved. 2013/12/27 - 26 -Confidential BAgendaChip Roadmap MT7620 Highlights ▪ MT7620 11ac Solutions ▪ MT7621 11ac Solutions ▪ MT7612 11ac SolutionsCopyright © MediaTek Inc. All rights reserved.2013/12/27- 27 -AC750 Products▪ Chip: MT7620A+7610EConfidential B▪ MT7620A HNAT, DPD, STA-Proxy, USB performance outperform among all 2x2 11n SoC ▪ eCos IPv6 turnkey for small memory footprint ▪ Shipping AC750 modelsD-Link (DIR-810)Copyright © MediaTek Inc. All rights reserved.IO-Data (WN-AC733GR)2013/12/27 - 28 -PCI (MZK-750DHP)AC750 Solution▪ MT7620A (580MHz)– – – – 2x2 11n 2.4GHz FE LAN(4)+WAN USB 2.0, SD-XC, I2S DDR2, SPI FlashMT7620AConfidential BMT7610E▪ MT7610E– 1x1 11ac (ePA)▪ 4L PCB, double sides▪ Power Consumption– 3.13w (power optimized) – 3.96w (rBOM optimized)▪ OS– Linux SDK – eCos turnkey (2/16)Copyright © MediaTek Inc. All rights reserved. 2013/12/27 - 29 -AC750 vs. HTC New One TP140 120 100 80 60 40 20 0 UplinkCopyright © MediaTek Inc. All rights reserved.Confidential BMbps119.288.890.311ac TPDnlink2013/12/27 - 30 -Bi-directionAC1200(FE) Solution▪ Chip: MT7620A+7612EConfidential B▪ HNAT, DPD, STA-Proxy, USB performance outperform among all 2x2 11n SoC ▪ enable 11ac iPA w/ industry lowest rBOM ▪ support ePA for better coverage ▪ eCos IPv6 turnkey for small memory footprintCopyright © MediaTek Inc. All rights reserved.2013/12/27- 31 -AC1200 Solution▪ MT7620A (580MHz)– – – – 2x2 11n 2.4GHz FE LAN(4)+WAN USB 2.0, SD-XC, I2S DDR2, SPI FlashConfidential BMT7612E▪ MT7612E– 2x2 11ac (iPA/ePA)MT7620A▪ 4L PCB, double sides ▪ Power Consumption– 3.13w (power optimized) – 3.96w (rBOM optimized)▪ OS– Linux SDKCopyright © MediaTek Inc. All rights reserved.2013/12/27- 32 -Confidential BAC1200 iPA Benchmark▪ Tx Power BenchmarkTX output (dBm) MT7612EBelkin AC1000 RTL8197D+ RTL8192ER+ RTL8812AR5GRF HW OFDM HT20 HT40 VHT20 VHT40 VHT80 6M 54M MCS0 MCS7 MCS0 MCS7 MCS0 MCS8 MCS0 MCS9 MCS0 MCS92x2 ac iPA 19 16.5 19 15.5 18.5 15.5 19 15 18.5 15 17.5 152x2 ac ePA 16 14DIR-860 AC1200 (BCM) 2x2 ac ePA 18 16 18 16 18 161218 14Copyright © MediaTek Inc. All rights reserved.2013/12/27- 33 -*TX Pout is single chain data at antenna port which includes 1.5dB loss (transmission line+diplexer+IPEX connector)Confidential BAgendaChip Roadmap MT7620 Highlights MT7620 11ac Solutions ▪ MT7621 11ac Solutions ▪ MT7612 11ac SolutionsCopyright © MediaTek Inc. All rights reserved.2013/12/27- 34 -Confidential BMT7621A Function Block20/25/40MHz Crystal DRAM Controller Clock/Timer/Reset/PLL NAND/SD-XC/eMMC SPI (2)DDR2(2Gbits, 1066) DDR3(4Gbits, 1200) NAND Flash(8Gbits) SPI Flash/Codec UART Interface USB 3.0 Interface USB 2.0 Interface SATA SATAIII (2) Audio Interface NFC MT6605 GPIO/LED11n WiFiPCIeMIPS 1004KEc (880 MHz) 32K I-Cache 32K D-Cache L2-Cache 256KB Storage AcceleratorMIPS 1004KEc (880 MHz) 32K I-Cache 32K D-Cache Cache Coherency Port HNAT+ BW CTRLUART Lite (3) USB 3.0 Host11ac WiFiPCIeUSB 2.0 Host PCIe I2S, PCM, S/PDIFCryptoGigabit SwitchRGMII01234I2C External InterfaceTransformerCopyright © MediaTek Inc. All rights reserved.2013/12/27- 35 -MT7621 ApplicationConfidential BEthernet USB dongle SPDIFeMMC SDXC USB/SATAUSBUSB (printer)Airplay WiFi MT7662 BT Sink play I2C MT6605 PCM (VoIP)I2S I2SSPITouch panelCopyright © MediaTek Inc. All rights reserved. 2013/12/27 - 36 -MT7621N/AMT7621A Package GbE Power Consumption PCB Heat Sink Application TFBGA 11.7x13.6 GbE(5)+rGMII 2.4W 2/4L Yes AC1200G-Router MT7621N TFBGA 11.7x13.6 rGMII 1.2W 2/4L NoConfidential BAC1200-Repeater NAS+GbE(1) AC1200-FE Internet RouterCopyright © MediaTek Inc. All rights reserved.2013/12/27- 37 -Confidential BMT7621 Introduction▪ Platform based network processor for 2x2/3x3 11ac, LTE cat4/5 with rich extensions– Rich I/O sets: 5p GbE switch, rGMII, PCIe(3), USB3, USB2, SD-XC, I2S, PCM, S/PDIF▪ HNAT+BW CTRL can work seamlessly– HNAT w/ 2Gbps wired speed IPv6 routing – HW bandwidth control to replace software scheduler▪ Upgradable L7 QoS database for “Auto QoS” ▪ Storage accelerator – GSO/GRO, fast DMA for write offload ▪ >400 Mbps VPN crypto engine ▪ NFC for WPS replacement ▪ Industry lowest power consumption ▪ World’s first 2x2 11ac iPA to save rBOM ▪ World’s first 2x2 11ac DBC 2L design to save rBOMCopyright © MediaTek Inc. All rights reserved. 2013/12/27 - 38 -AC1200AC1200 -GbE 4L RFB▪ 4L, double side ▪ DDR3 1200/NAND Flash ▪ On board dual band concurrent WIFI– 7612E: 2x2 11ac iPA/iLNA – 7602E: 2x2 11n iPA/iLNAGbE 5p GbEConfidential BU3U2 MT6605 (NFC)IC+ GbE PhyNAND Flash MT7621 A DDR3 (1200)▪ Co-crystal design ▪ External high power module– 7612E: 2x2 11ac – 7602E: 2x2 11n (256QAM) – 7603E: 2x2 11n (64QAM)SD-XCSATA3.0ASM1061 MT7602E (2.4GHz) MT7612E (11ac) S/PDIF▪ USB 3.0/2.0/SATA3.0Copyright © MediaTek Inc. All rights reserved. 2013/12/27 - 39 -*Note: PCB cost estimation by vendor “Newheart”AC1200AC1200 -GbE 2L RFB▪ PCB cost down 40%– Dimension: 168mm x 115mm x 1.6mm – Single side – FR4 PCB: 100pcs estimation – 4Layer:NTD 175 – 2Layer: NTD 105*U 2Confidential B5p GbESD-XC DDR2 (1066)▪ DDR2 800/1066, SPI flash ▪ Co-crystal design ▪ On board dual band concurrent WIFI– 7612E: 2x2 11ac iPA/iLNA – 7602E: 2x2 11ac iPA/iLNAMT7602E (2.4GHz)MT7621ASPI FlashMT7612E (11ac)▪ USB 2.0 HS host supportCopyright © MediaTek Inc. All rights reserved. 2013/12/27 - 40 -MT7621A HDK V31*Note: PCB cost estimation by vendor “Newheart”Benchmark with Dlink DIRDIR-860LBetter computing power Integrated RF front-endConfidential BBenchmark Chip Set AC1200-GbE MT7621A+ MT7612E+MT7602E iPA/iLNA Dual Core 880MHz TX:iPA performance better than competitor ePADlink DIR-860L BCM47081A0+ BCM4352+BCM43217 ePA/eLNA Single Core 800MHz Front-end module:RFMD RFFM4501CPU WIFI 5GMTK AC1200-GbERX:Low rate worst than competitor eLNA 0.5dB High rate better than competitorBetter RF performanceWIFI 2.4GTX:iPA performance better than competitor iPATX:iPARX: Dlink DIR-860L Excellent power consumption Lower thermal risk Cost advantage Power Consumption Thermal r-BOMiLNA better than competitor iLNARX: iLNAUplink: 7.21W Downlink: 7.45W Less heat sink, thermal pad and shielding case USD: 3.8638 Co-clock supportUplink: 9.03W Downlink: 10.98W More thermal strategy USD: 6.5361 w/ RF front-end USD: 5.3967 w/o RF front-endNote: rBOM cost is not including thermal strategy, and shielding case Copyright © MediaTek Inc. All rights reserved. 2013/12/27 - 41 -Benchmark with Netgear R6200v2Confidential BBenchmark Chip Set AC1200-GbE MT7621A+ MT7612E+MT7602E ePA/eLNA Dual Core 880MHz TX:ePA: SKYWORKS SKY85402-11Netgear R6200v2 BCM47081A0+ BCM4352+BCM43217 ePA/eLNA Single Core 800MHz Front-end module:RFMD RFFM4501Better computing power Better RF performance MTK AC1200-GbECPU WIFI 5GRX:eLNASKYWORKS SKY85601-11Better RF performanceWIFI 2.4GFront-end module:RFMD RFFM4203TX:ePA: SKYWORKS SE2528RX: Netgear R6200-V2 Power Consumption Lower thermal risk Cost advantage Thermal r-BOM Less heat sink, thermal pad and shielding case USD:3.8638* Co-clock support USD: 3.9684*eLNA: Richwave RTC6602Uplink: 9.55W Downlink: 12.48W*Note: rBOM cost is not including external RF front-end, thermal strategy, and shielding case Copyright © MediaTek Inc. All rights reserved. 2013/12/27 - 42 -Media Security Gateway (MT7621+STB+ZigBee)Confidential B11n WiFiDDR3 NAND11ac WiFiUSB 2.0 USB 3.0STB SoC (Slave )ASM 1060ZigBeeMT7621 (Host)PCIeHDDSLICUART rGMII Transformer (1000Mps)R J 1 1R J 1 1R J 4 5R J 4 5R J 4 5R J 4 5MocaCopyright © MediaTek Inc. All rights reserved.2013/12/27- 43 -MT762xA + 2.8”(240x320 Dots) TFT +Touch Panel (Resistive (Resistive) )Confidential BCopyright © MediaTek Inc. All rights reserved.2013/12/27- 44 -What’s QoS?▪ End to End ▪ Big Pipe to Small Pie ▪ QoS Components1 Classifier 2 Queue/BW Mgmt 3 Scheduler/ShaperConfidential BCopyright © MediaTek Inc. All rights reserved.2013/12/27- 45 -HWHW-BWBW-CTRL - UpstreamConfidential B1 2 3 4 3 2 1Copyright © MediaTek Inc. All rights reserved.2013/12/27- 46 -HWHW-BWBW-CTRL - DnstreamConfidential B1 2 3 4 3 2 1Copyright © MediaTek Inc. All rights reserved.2013/12/27- 47 -HWHW-BWBW-CTRL – Dnstream (2)1Confidential B2Copyright © MediaTek Inc. All rights reserved.2013/12/27- 48 -USB 3.0 Samba BenchmarkConfidential BAP Linksys EA6400 Buffalo AC1750 D-Link DIR-860L MT7621AFormatHDD Model NameRead (MByte/sec) 13.75Write (MByte/sec) 11.67 15.77test tool InterfaceFAT32Buffalo HD-LB131.45 37.93 72.30IOMETER USB3.0 16.55 29.50Copyright © MediaTek Inc. All rights reserved.2013/12/27- 49 -Confidential BAgendaChip Roadmap MT7620 Highlights MT7620 11ac Solutions MT7621 11ac Solutions ▪ MT7612 11ac SolutionsCopyright © MediaTek Inc. All rights reserved.2013/12/27- 50 -。
MTK6260儿童定位电话手表原理图
LPA0 [5] LSDA0 [5] LSCK0 [5] [5] LPCE0_B [5] LPRSTB [5] NLD0 NLD1 NLD2 NLD3 NLD4 NLD5 NLD6 NLD7
K16 L17 L16 L18 M17 K18 G17 G16 H17 J18 K17 N18 K19 H16 J19
T19 P18 R19 N16 P17 N17 R18 J16 H18
SOUT SFCS0 SIN SCK SHOLD SWP SFCS1 LSCE1_B LSRSTB LPTE LPA0 LRD_B LWR_B LPCE0_B LPCE1_B LPRSTB NLD0 NLD1 NLD2 NLD3 NLD4 NLD5 NLD6 NLD7 NLD8
SIM 32K
AVSS43_PMU AVSS43_PMU AVSS43_PMU AVSS43_PMU AVSS43_PMU AVSS43_SPK AVSS28_ABB SIM2_SRST SIM2_SCLK SIM2_SIO XTAL_SEL
Charger CHRIN max. 8.0V when U290 NC
C
C 2
Place this resister close to battery connector, and SNS trace should be 4mil~6mil, and others are 40mils VBAT 40mils R13
1
3
B
0.2¦¸_1%
Q / SSM3K35MFV Q302
KCOL4 KCOL3 KCOL2 KCOL1 KCOL0
C18 F17 E18 A18 E17
B12
A12 A17
B16 E11
Quectel_M26-OpenCPU_硬件设计手册_V1.0
2 综述 ...................................................................................................................................................... 11
3.5.1. 主串口............................................................................................................................. 34
本文档手册版权属于移远公司，任何人未经我公司复制转载该文档将承担法律责任。
Q n 版权所有 ©上海移远通信技术有限公司 2014，保留一切权利。 Confide Copyright © Quectel Wireless Solutions Co., Ltd. 2014
上海移远通信技术有限公司
1 / 81
如需技术支持或反馈我司技术文档中的问题，可随时登陆如下网址： /support/techsupport.aspx
l 前言
移远公司提供该文档内容用以支持其客户的产品设计。客户须按照文档中提供的规范，参数来设计其产品。
te 由于客户操作不当而造成的人身伤害或财产损失，本公司不承担任何责任。在未声明前，移远公司有权对 c l 该文档规范进行更新。 ue tia 版权申明
Q n 3.2.2. 关机 ................................................................................................................................ 26 3.2.2.1. PWRKEY 引脚关机............................................................................................ 26 e 3.2.2.2. API 函数关机...................................................................................................... 27 fid 3.2.2.3. 低压自动关机 ..................................................................................................... 27 3.2.3. 推荐的系统开关机电路 ................................................................................................... 28 3.3. 省电技术 ................................................................................................................................ 29
16f630中文数据手册【Word版】9p (2)
P I C16F630/676数据手册14 引脚闪存8 位CMOS 单片机2004 Microchip Technology Inc.DS40039C_CN请注意以下有关 Microchip 器件代码保护功能的要点：· · · Microchip 的产品均达到 Microchip 数据手册中所述的技术指标。
Microchip 确信：在正常使用的情况下， Microchip 系列产品是当今市场上同类产品中最安全的产品之一。
目前，仍存在着恶意、甚至是非法破坏代码保护功能的行为。
就我们所知，所有这些行为都不是以 Microchip 数据手册中规定的操 代码保护功能处于持续发展中。
Microchip 承诺将不断改进产品的代码保护功能。
任何试图破坏 Microchip 代码保护功能的行为均可视 为违反了《数字器件千年版权法案（Digital Millennium Copyright Act ）》。
如果这种行为导致他人在未经授权的情况下，能访问您的软 件或其它受版权保护的成果，您有权依据该法案提起诉讼，从而制止这种行为。
本出版物中所述的器件应用信息及其它类似内容仅为您提供便 利，它们可能由更新之信息所替代。
确保应用符合技术规范， 是您自身应负的责任。
Microchip 对这些信息不作任何明示或 暗示、书面或口头的声明或担保，包括但不限于针对其使用情况、质量、性能、适销性或特定用途的适用性的声明或担保。
Microchip 对因这些信息及使用这些信息而引起的后果不承担任何责任。
未经 Microchip 书面批准，不得将 Microchip 的产品用作生命维持系统中的关键组件。
在 Microchip 知识产权保护下，不得暗中或以其它方式转让任何许可证。
DS40039C_CN 第 ii 页商标 Microchip 的名称和徽标组合、 Microchip 徽标、 Accuron 、 dsPIC 、 KL 、 microID 、 MPLAB 、 PIC 、 PICmicro 、PICSTART 、 PRO MATE 、 PowerSmart 、 rfPIC 和SmartShunt 均为Microchip Technology Inc .在美国和其它国家或地区的注册商标。
il6260中文引脚功能
1. 低输入负载电流指示器。
当断言低，表明减少贷款2.数字输入。
当断言高，表明vccp和vcc_mch电压调节范围内。
pgd_in信号所需的clk_en #很低，好的要高3.147k电阻可设置内部参考电流4.热过载输出指示器5.热敏电阻输入vrtt #电路6.一个电容器从这个引脚，可设置最大转换速率对输出电压。
软脚的误差放大器的反相输入7电流输入。
一个电阻从这个引脚下垂旁白集电压限制业主立案法团之旅。
10µ电流源连接到这个引脚8. 从这个引脚电阻的开关频率补偿方案。
（实现Ω给约300 kHz）。
大众销来源分析9该引脚是误差放大器的输出10. 这个引脚是误差放大器的反相输入11. 该引脚输出的差分放大器12. 远程的核心电压检测输入。
连接到微处理器芯片13. 遥感电压返回。
连接到地面微机迪14. 输出衰减放大器的反相输入端下垂15.放大器。
输出=旁白+下垂16. 一个输入到集成电路，报告当地的输出电压17. 该引脚连接到电流和结18. 电池供电电压，用于前馈19. 信号地连接到本地控制器地20. 电压偏置电源21. 个别电流传感通道322. 个别电流传感通道223. 个别电流传感通道124.强制连续导电模式（fccm）使引脚器件驱动器。
这将禁用二极管仿真25脉宽调制输出通道326. 脉宽调制输出通道2。
为isl6260b，防扩散安全倡议#低将使该输出三态27.脉宽调制输出通道1。
vid0，vid1，vid2，vid3，vid4，vid5，vid6vid输入vid0 =新38.数字输出，使系统的锁相环时钟；主动去10µ后pg_in积极电压是在10%的启动电压40.良好的电源开漏输出。
将拔出的外部由680Ω电阻vccp或1.9kΩ至35.电压调节器使输入。
一个高层次的逻辑信号在该引脚可调节器36. 更深的睡眠使能信号。
一个高层次的逻辑信号，该引脚表明，微处理器是在更深的睡眠模式，并表明，缓慢的进入和退出的发生。
X11 AOM-TPM-9670V AOM-TPM-9670H AOM-TPM-9670V(H)-S
TPM for X11AOM-TPM-9670V AOM-TPM-9670HAOM-TPM-9670V(H)-SUSER’S MANUAL1.2aManual Revision 1.2aRelease Date: October 13, 2022Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document.Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.Copyright © 2022 by Super Micro Computer, Inc.All rights reserved. Printed in the United States of AmericaThe information in this user’s guide has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at .Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice. This product, including software and docu-mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license.IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.FCC Statement: Refer to Supermicro's website for FCC Compliance Information.California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See /hazardouswaste/perchlorate”.PrefaceAbout This User's GuideThis user's guide is written for system integrators, IT professionals, and knowl-edgeable end users who wish to add additional data security mechanisms to their systems to protect highly sensitive applications. It provides detailed information on configuring, provisioning, and using the Trusted Platform Module (TPM).User's Guide OrganizationChapter 1 provides an overview of the TPM, including its features and uses.Chapter 2 provides detailed instructions on installing, provisioning, and using the TPM.Conventions Used in This User's GuidePay special attention to the following symbols for proper TPM configuration.Warning: Important information given to avoid TPM configuration errors.Note: Additional information given to ensure correct and proper TPM configuration setup.PrefaceSuper TPM User's GuideContacting SupermicroHeadquartersAddress:Super Micro Computer, Inc.980 Rock Ave.San Jose, CA 95131 U.S.A.Tel:+1 (408) 503-8000Fax:+1 (408) 503-8008Email:************************(GeneralInformation)************************(SalesInquiries)***********************************(Gov.SalesInquiries)**********************(TechnicalSupport)******************(RMASupport)************************(Webmaster)Website:EuropeAddress:Super Micro Computer B.V.Het Sterrenbeeld 28, 5215 ML's-Hertogenbosch, The NetherlandsTel:+31 (0) 73-6400390Fax:+31 (0) 73-6416525Email:***************************(SalesInquiries)*****************************(TechnicalSupport)*************************(RMASupport) Website:www.supermicro.nlAsia-PacificAddress:Super Micro Computer, Inc.3F, No. 150, Jian 1st Rd.Zhonghe Dist., New Taipei City 235Taiwan (R.O.C)Tel:+886-(2) 8226-3990Fax:+886-(2) 8226-3992PrefaceAsia-PacificEmail:*************************.tw(SalesInquiries)**********************.tw(TechnicalSupport)******************.tw(RMASupport)Website:Super TPM User's GuideTable of ContentsPreface (3)Chapter 1 Introduction ..............................................................................1-1 1.1 Overview of the Trusted Platform Module (TPM) ...........................................1-1 1.2 Supermicro TPM Features ..............................................................................1-2 1.3 Motherboards Supported for TPM ..................................................................1-3 1.4 Intel® TXT ........................................................................................................1-3 Chapter 2 Deploying and Using the TPM ...............................................2-1 2.1 Installing the TPM Onto the Motherboard .......................................................2-1 2.2 Enabling the TPM via the BIOS and Intel® Provision Utility ...........................2-2 2.3 An Important Note to the User ........................................................................2-9Chapter 1: IntroductionChapter 1Introduction1.1 Overview of the Trusted Platform Module (TPM)The Trusted Platform Module (TPM9670) is a special add-on module that may be installed onto Supermicro X11 dual and single processor motherboards that support CPU Socket 3674 only.Types of TPMsNote: TPM module must be provisioned in order to support Intel® TrustedExecution Technology (TXT). Please contact Supermicro Technical Sup-port to get more details about the Intel tool.The TPM-9670 series add-on modules use TCG (Trusted Computing Group) ver-sion 2.0 firmware.The following SKUs are available:• AOM-TPM-9670V, a vertical TPM module• AOM-TPM-9670H, a horizontal TPM moduleHorizontal vs. Vertical: Generally, whether you should use a TPM with a horizontal or vertical form factor depends on the physical space available. Horizontal TPMs are used in 1U chassis. Vertical TPMs are used in 2U or taller chassis, which are designed with a smaller footprint to occupy less space on the motherboard.Server vs. Client: To use the TXT function, each TPM has been provisioned as a server model or client model. Be sure to use the appropriate TPM for your needs.Both server TPM and client TPM are designed to support motherboards with Socket P (LGA3647) processors installed.Super TPM User's Manual1.2 Supermicro TPM Features1. TCG2.0 compliance2. SPI interface3. Microcontroller in 0.22/0.09-µm CMOS technology4. Compliant embedded software5. EEPROM for TCG firmware enhancements and for user data and key support6. Hardware accelerator for SHA-1 and SHA-256 hash algorithm7. True Random Number Generator (TRNG)8. Tick counter with tamper detection9. Protection against dictionary attack10. Infineon's TPM 2.0 is Common Criteria (CC) certified at Evaluation AssuranceLevel (EAL) 4 Moderate11. General-purpose I/O12. Intel® Trusted Execution Technology (TXT) support13. AMD® Secure Virtual Machine Architecture support14. Full personalization with Endorsement Key (EK) and EK certificate15. Power-saving sleep mode16. 3.3V power supply17. WHQL dual-mode 1.1b + 1.2 TPM Windows Kernel Mode DriverChapter 1: Introduction1.3 Motherboards Supported for TPMPlease refer to the Supermicro website (/) for a complete and most up-to-date list of the motherboards that can support the TPM. As a general rule, besides the X11 motherboards, the list includes most X9 motherboards, all X10 motherboards, and some AMD motherboards. These motherboards will come with a specially designated JTPM1 connector on every board, which will be listed in the respective motherboard's manual.1.4 Intel® TXTThe Intel Trusted Execution Technology (TXT) is a software tool that may be used in conjunction with the TPM to provide additional security for pre-launch firmware of clusters and clouds, including but not limited to the BIOS, IPMI, SAS firmware, and CMM firmware. It is optional, but the TPM is required for it to be provisioned.It will further enhance system security by protecting firmware against malicious attacks on vulnerable areas.It works by matching hypervisor measures with encryption keys upon system launch.If the hypervisor does not match the keys, the hypervisor will be prevented from starting up.To use the TXT, you need to enable TXT support after provisioning the TPM.Note: TXT is only supported on Intel platforms that support TPM use.How the TXT WorksThe Intel TXT, when enabled, follows a step-by-step process to ensure the security of pre-launch components.1. Measures the hypervisor launch upon system startup2. Checks for a match3. If matched: The TXT signals "trusted," and the launch is allowed to proceed.4. If mismatched: The TXT signals "untrusted," and the launch is blocked.Chapter 2: Deploying and Using the TPMChapter 2Deploying and Using the TPMFollow the instructions below to begin using the TPM.2.1 Installing the TPM Onto the MotherboardTo install the Trusted Platform Module onto your motherboard, follow the steps below.1. Find the 9-pin male JTPM1 connector on the motherboard. If you need helplocating this connector, consult your motherboard manual. If the board doesnot have this feature, then it does not support the TPM.2. Using the key pin as a reference, orient, and align your TPM with the connec-tor.key pin3. Carefully insert the TPM into the connector on the motherboard, making surenot to damage the pins.Note: The orientation of the TPM to be installed depends on whether ithas a horizontal or vertical form factor. The vertical TPM is intended to"stand" perpendicular to the motherboard, while the horizontal TPM liesflat (parallel) on the motherboard. See the below two images for the cor-rect orientation.Horizontal TPM Vertical TPMSuper TPM User's Manual2.2 Enabling the TPM via the BIOS and Intel® ProvisionUtilityThere are two components to the process of enabling the TPM. After you have installed the TPM onto the motherboard, you must first "verify" the TPM for the motherboard. This is done through the BIOS, which can also be used to enable TXT support. You then will need to "lock" the TPM in the firmware. This is done through the provision utility provided by Intel.A. Enabling the TPM in the BIOS1. Enter the BIOS setup screen. You may do this either from the IPMI remoteconsole or from the server directly using KVM. Reboot the system, and pressthe <Del> key as the system boots until you reach the BIOS screen.2. You will be presented with the BIOS Setup main screen. Using your arrowkeys, navigate to the "Advanced" tab. From there, navigate down and selectthe "CPU Configuration" option. Press <Enter>.3. You will then be taken to the CPU Configuration page. Using your arrow keys,navigate down to the "Intel Virtualization Technology" option, as shownbelow, and press <Enter>. If this item is not already enabled, select Enableand press <Enter>.Chapter 2: Deploying and Using the TPM4. Once you have enabled virtualization support, press your <Esc> key until youare back to the "Advanced" tab. Navigate down to the "Trusted Computing"option and press <Enter>.The Trusted Computing window will appear.Note: By default, "SHA-1 PCR Bank" and "SHA-256 PCR Bank” areEnabled.5. Disable "PH Randomization" and "TXT Support" only. Using the arrowkeys, select each option, press the <Enter> key to select Disabled, andpress the <Enter> key again.Super TPM User's Manual7. Use the arrow keys to select "Save Changes ". Press the <Enter > key.6. Press the <Esc > key to bring you back to the "Advanced " tab options. Usethe arrow keys to toggle to the "Save & Exit " tab.Chapter 2: Deploying and Using the TPMB. Provisioning Intel TXT (Server)Next, you will need to provision Intel TXT in the UEFI shell.Note: If the TPM part number is AOM-TPM-9670V-S or AOM-TPM-9670H-S, you do not need to get the Intel® Provisioning Tool. Please go aheadand enable the Intel TXT feature in the BIOS.1. Select "UEFI: Built-in EFI Shell" in the BIOS. The system will boot into theUnified Extensible Firmware Interface (UEFI) with a list of available USBdevices.2. Each USB device has its own code. Type the code for the USB device thatyou want to use into the command line at the bottom of the screen. and press the <Enter> key.Note: The device used for the purposes of this user guide had a codeof fs0. Replace this code with the code that corresponds to your device.3. In the command line at the bottom of the screen, follow these steps belowafter typing “FS0”.Super TPM User's Manual4. After the provisioning process has been completed, you will need to go backinto the BIOS and enable "TXT Support". To do this, type "exit" in the com-mand line at the bottom of the screen and press the <Enter> key.Chapter 2: Deploying and Using the TPMC. Enabling TXT SupportThe last step is enabling TXT Support in the BIOS and UEFI shell.1. Go back to the "Advanced" tab in the BIOS and enable Platform Hierarchy,Storage Hierarchy, Endorsement Hierarchy, PH Randomization, and TXTSupport.2. Go back to the "Save & Exit" tab and select "UEFI: Built-in EFI Shell" inthe BIOS. When the confirmation window appears, select <Yes>.Super TPM User's Manual3. After Enabling TXT Support in the BIOS, you will need to run TXT in theUEFI shell. In the Command line at the bottom of the page, type “get-sec64_v2.0.11.efi -l sen -a” and press the <Enter> key. TXT support is now enabled.4. To Exit from the TXT Environment, type “getsec64_v2.0.11.efi -l sexit” inthe command line at the bottom of the screen and press the <Enter> key.Chapter 2: Deploying and Using the TPM2.3 An Important Note to the UserThe graphics shown in this user's guide were based on the latest information available at the time of publishing of this guide. The TPM screens shown on your computer may or may not look exactly like the screen shown in this user's guide.For any further assistance, please refer to our website for details.(Disclaimer Continued)The products sold by Supermicro are not intended for and will not be used in life support systems, medi-cal equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage. Accordingly, Supermicro disclaims any and all li-ability, and should buyer use or sell such products for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and proceedings of any kind。
磁性技术的魔法：MT613X omni方向低功耗360度开关IC说明书
3 Product Overview of MT613XOmni-polar, Low Power, 360 Degree Switch ICMT613X1 Product DescriptionThe MT613X family is produced with monolithic technology ，which builds AMR sensor &ASIC on one chip.The IC internally includes a Wheatstone bridge with magnetic film ,a current regulator for operating with supply voltage from 1.65V to 5.0V,a sleep/awake logic for low power consumption requirement,small signal amplifier and Schmitt trigger comparator with dynamic offset cancellation,and an output driver with push pull output.When combined with a magnet,it becomes a non-contact switch with low power consumption,high sensitivity and high reliability.All directions of horizontal magnetic field parallel to the electrode of the package can be detected by an arbitrary polarity.The MT613X family provide SOT-23for surface mount ，RoHS compliant.Part No.DescriptionMT613XATSOT-23, tape & reel (3000pcs/bag)4 Application￭Home appliances, Industrial ￭Position Detection ￭Proximity Switch ￭Smart Meter ￭Speed Detection ￭Handheld Device ￭Consumer Device2 Features￭Monolithic Technology￭360Degree AMR (Anisotropic Magneto Resistance)￭Omni-polar Switch￭ 1.65～5.0V Operating Vcc Range￭-40℃~125℃Operating Temperature ￭Package Option:SOT-23￭Magnetic Sensitivity Option:B OP =±18Gs,B RP =±13Gs￭Push Pull &Open Drain Output Option:MT6131&MT6132:Push Pull MT6133&MT6135:Open Drain ￭Operation Frequency Option:MT6131&MT6133:20Hz MT6132&MT6135:1KHz ￭Low Power Consumption￭RoHS Compliant:(EU)2015/8635. Pin Configurationand FunctionsV CCOut GND SOT-23123DescriptionPowerOutputPush Pull or Open DrainGroundFigure.1Pin Configuration & Functions 按钮SOT-23Top-ViewTO-92Top-ViewOUTVccGND321Table of Contents1Product Description (1)2Features (1)3Product Overview of MT613X (1)4Applications (1)5Pin Configuration and Functions (1)6Definition of Switching Function (3)7Function Description (3)8Feature Description (3)9Functional Block Diagram (4)10Electrical and Magnetic Characteristics (5)10.1Absolute Maximum Ratings (5)10.2Electrical Specifications (5)10.3Magnetic Characteristics (6)10.4ESD Ratings (6)10.5Characteristic Performance (6)10.6Typical Output Waveform (7)11Typical Application Circuit (7)12Power on Output Waveform (8)13Package Material Information (9)13.1SOT-23Package Information (9)14 Copy Rights and Disclaimer (10)Reversion History1Originally Version2 1.1 Version Update supply currentUpdate the marking spec of SOT-236 Definition of Switching FunctionVccNorthSouthFigure.2Omni-polar Switching FunctionFigure.2 shows the device functionality and hysteresis7 Function DescriptionB OP : Operating Point, Magnetic flux density applied on the branded side of the package which turns the output driver ON (V OUT =Low)B RP : Releasing Point, Magnetic flux density applied on the branded side of the package which turns the output driver OFF (V OUT =High )B HYST : Hysteresis Window, |B OP -B RP |8 Feature DescriptionThe MT613X series is sensitive to the magnetic field that is parallel to the package (X & Y axis). To operate the MR switch, the magnetic field should be applied to the sensor parallel to the package. MT613X series detect the magnetic field in any parallel direction, but it does not respond to magnetic field in the vertical direction.Figure.3Detection of magnetic fieldB OP N B RP N B OP SB RP S GND 按钮OUTVcc321Direction of magnetic field(N or S)9 Functional Block DiagramFigure.4Functional Block Diagram (MT6131&MT6132)VccOutGNDRegulatorSleep/AwakeLogicDynamic Offset CancellationAMP COMP Output DriverESDAMRAMRRegulatorSleep/AwakeLogicDynamic Offset CancellationAMP COMP Output DriverESDAMRAMRVccOutGNDFigure.5Functional Block Diagram (MT6133&MT6135)10.2 Electrical SpecificationsAt T A =-40~125℃, V CC =1.65V~5.0V (unless otherwise specified)Symbol Parameters Test Condition Min Typ Max Unit V CCSupply VoltageOperating1.65 3.60 5.00V I CC Supply CurrentMT6131 & MT6133, V CC =3.6V, ∣B∣<∣B RP ∣- 1.0 1.5uA MT6132 & MT6135, V CC =3.6V, ∣B∣<∣B RP ∣-11.015.0uA V OH Output High Voltage MT6131 & MT6132, V CC =5V,I OUT =5mA, ∣B∣>∣B OP ∣4.6--V V OL Output Low Voltage V CC =5V,I OUT =-5mA, ∣B∣>∣B OP ∣--0.4V I OFFOutput Leakage Current V OUT =5V, ∣B∣<∣B RP ∣--0.1uA T POPower on Time dV CC /dt>3.6V/us, B>B OP (MAX)-80120us F OPOperation Frequency MT6131 & MT6133, V CC =3.6V 1020-Hz MT6132 & MT6135, V CC =3.6V 0.5K 1K -Hz T AW Awake Time V CC =3.6V-16-us T SL Sleep Time MT6131 & MT6133, V CC =3.6V -50-ms MT6132 & MT6135, V CC =3.6V -1-ms D.C.Duty CycleMT6131 & MT6133, V CC =3.6V -0.03-%MT6132 & MT6135, V CC =3.6V- 1.50-%R THThermal Resistance of SOT-23-301-℃/W10 Electrical and Magnetic Characteristics 10.1 Absolute Maximum RatingsAbsolute maximum ratings are limited values to be applied individually, and beyond which theserviceability of the circuit may be impaired. Functional operability is not necessarily implied. Exposure to absolute maximum rating conditions for an extended period of time may affect device reliability.Symbol Parameters Min Max Units V CC Supply Voltage-7V V RCC Reverse Battery Voltage -0.4-V V OUT Output Voltage-7V I OUT Continuous Output Current -20mA T A Operating Ambient Temperature -40125℃T S Storage Temperature -50150℃T J Junction Temperature -165℃BMagnetic Flux Density1200Gs10.5 Characteristic PerformanceFigure.6Supply Current vs. TemperatureFigure.7Magnetic Characteristics vs. Temperature (B OP & B RP ) (At V CC =3.6V)Magnetic Field @ 90Degree & 180 DegreePart No.Symbol Min Typ Max Unit MT613X SeriesB OP -±18±28Gs B RP ±3±13-Gs B HYST-5-Gs10.3 Magnetic CharacteristicsAt T A =25℃, V CC =1.65V~5.0V (unless otherwise specified)10.4 ESD Ratings Symbol Reference Values Unit V ESDHuman-body model (HBM)AEC-Q100-0024000V Charged-device model (CDM)AEC-Q100-0111000VMagnetic Characteristics vs. Temperature (B HYST ) (At V CC =3.6V)Magnetic Field @ 90 Degree & 180 DegreeFigure.85101520253035-402585125150M a g n e t i c F i e l d I n t e n s i t y (G s )Bop (90 Degree)Brp (90 Degree)Bop (180 Degree)Brp (180 Degree)℃3691215-402585125150M a g n e t i c F i e l d I n t e n s i t y (G s )Bhyst (90 Degree)Bhyst (180 Degree)℃0.511.522.533.544.55-402585125150S u p p l y C u r r e n t (u A )Vcc=1.65V Vcc=3.6V Vcc=5.0V10.6 Typical Output WaveformMT6131AT as exampleBVTTHighLowFigure.10Digital Output vs. Magnetic Flux Density & Sampling PulseB OP SB RP S B RP N B OP NOnOffM a g n e t i c F l u xS a m p l i n g P u l s eO u t p u tFigure.9360 Degree Magnetic Characteristics (At V CC =3.6V, T A =25 ℃）10.5 Characteristic Performance (continued)Note: Output is not immediately updated until the chip wakes up from sleep mode and samples the input510152025153045607590105120135150165180195210225240255270285300315330345Bop Brp12 Power on Output WaveformV CC rise time < 1us, T PO is the time from the stable point of V CC to the valid point of outputFigure.13Power on Output Waveform∣B∣>∣B OP ∣∣B∣<∣B RP ∣T POM a g n e t i c F l u x V C CO u t p u t11 Typical Application CircuitFigure.11Typical Application Circuit Push Pull Output MT6131 & MT 6132OUTVccGND按钮321C 1=100nFC 2=1nFVccOutGNDFigure.12Typical Application Circuit Open Drain Output MT6133 & MT 6135OUTVccGND按钮321C 1=100nFC 2=1nFVccOutGNDR L = 100k Ω13 Package Material Information （For Reference Only –Not for Tooling Use ）13.1 SOT-23 Package InformationFigure.14SOT-23 Chip Marking SpecFigure.15SOT-23 Package DrawingSensing CenterSymbolDimensions in Millimeters Dimensions in Inches MinMaxMinMaxA 1.050 1.2500.0410.049A10.0000.1000.0000.004A2 1.050 1.1500.0410.045b 0.3000.5000.0120.020c 0.1000.2000.0040.008D 2.820 3.0200.1110.119E 1.500 1.7000.0590.067E1 2.6502.9500.1040.116e 0.950 TYP0.037TYPe1 1.800 2.0000.0710.079L 0.3000.6000.0120.024θ0︒8︒0︒8︒x 1.460TYP 0.057 TYP y 0.800 TYP 0.032TYP z0.600 TYP0.024 TYPGND按钮按钮XXXXOUTVcc321Y WXXXX YWDateCode: Y: Year W: Week Product ID14 Copy Rights and Disclaimer1.This document may not be reproduced or duplicated, in any form, in whole or in part without priorwritten consent of MagnTek. Copyrights © 2019, MagnTek Incorporated.2.MagnTek reserves the right to make changes to the information published in this document atanytime without notice.3.MagnTek’s products are limited for use in normal commercial applications. MagnTek’s products arenot to be used in any device or system, including but not limited to medical life support equipment and system.For the latest version of this document, please visit our website: 。
MTK平台驱动调试介绍
模块调试：LCM、Backlight
LCM
Main-Panel LCD Module EMI/NFI 8080
Parallel Accelerator
LCD DMA Controller
Sub-Panel LCD Module (Opt.)
LCD DATA LCD CLK LCD CS0/1 LCD A0
• • • •
• • • • • • • • • • • • •
如果需要添加新键，除了上述外还需修改以下几处： interface\hwdrv\kbd_table.h 定义DEVICE_KEY_XX：注意顺序 #define DEVICE_KEY_XX顺序值 plutommi\mmi\Framework\Osl\OslSrc\KeyBrd.c 假设DEVICE_KEY_XX为特定的按键 定义特定的按键 const U16 PresentAllKeys[ ]= { KEY_0,KEY_1,KEY_2,KEY_3,KEY_4,KEY_5,…… //定义特定的按键 KEY_XX， };
Serial Accelerator
MT 62XX
• • • • • • • • • • • • •
以SUNRISE_0255_LCM为例 MXX_GPRS.mak中配置LCD_MODULE和MAIN_LCD_SIZE； LCD_MODULE ＝ SUNRISE_0255_LCM MAIN_LCD_SIZE = 240X320 Option.mak中加入： COM_DEFS_FOR_SUNRISE_0255_LCM = SUNRISE_0255_LCM HX8312 COLOR_LCD TFT_MAINLCD QVGA_MAINLCD 其中HX8312为LCD的型号； COLOR_LCD，TFT_MAINLCD，QVGA_MAINLCD为LCD的类型 QVGA_MAINLCD：240X320 QCIF_MAINLCD: 176X220 QQVGA_MAINLCD: 120X160 如在SUNRISE_0255_LCM的基础上添加兼容屏；则在HX8312后面 顺序加入LCD的型号 如果有Sub LCD；则需要顺序加入DUAL_LCD；COLOR_SUBLCD 以及型号名称；
6260龙圣诺基亚夹具使用说明
3230 /6260龙圣诺基亚夹具使用说明
龙圣诺基亚夹具对3230/6260等部分特殊手机的连接方法有2种；常见夹具中很多夹具不能正常刷机。
下面介绍的两种方法将可以分别用来解锁和刷机。
第一种：（如下图）为常见的电池脚连接GND BSI VCC 三个脚。
测试点左边空一个角连接。
这种连接方式在HWK中可以正常info但是不能check 可以解锁、但是不能刷机等其他问题。
这是一种比较常见的连接方式。
比较简单。
第二种：方法比较特殊在电池脚位那里只连接VCC和GND 中间BSI不连接。
左边的空白脚连接BSI。
这种连接方式可以刷机但是不能Info 可以check但是不能解锁。
下面我们将对这种方法进行详细说明。
下图所示为最后的连接效果图；请注意电池脚位置处黄色BSI 没有连接。
而将黄色BSI部分用一根针连接到了左侧的空白脚位置。
下面我们说下如何简单快速的利用这种模式联机。
以上两种方法均可以刷机。
第一种方法可以刷机解锁、但是不能刷机。
第二种方法不能解锁但是可以刷机，。
对于不同要求不同需要请自行
选择。
两种方法都是可以联机的。
龙
圣
电
子
技
术
部
：
h t
t
p
:
/
/
w
w
w
.
l
o
s
n
n
.
c
o
m。
MT6260简介
Document Revision HistoryTable of ContentsDocument Revision History (2)Table of Contents (3)Preface (5)1System Overview (6)1.1Platform Features (10)1.2MODEM Features (11)1.3GSM/GPRS/EDGE RF Features (12)1.4Multimedia Features (13)1.5Bluetooth Features (15)1.6FM Features (16)1.7General Descriptions (17)2Product Descriptions (19)2.1Pin Description (19)2.2Electrical Characteristics (40)2.3Package Information (52)2.4Ordering Information (56)Lists of Tables and FiguresTable 1. Pin coordinates (19)Table 2. Acronym for pin types (21)Table 3. PIN function description and power domain (21)Table 4. Acronym for state of pins (27)Table 5. State of pins (27)Table 6. Acronym for pull-up and pull-down types (31)Table 7. Capability of PU/PD, driving and Schmitt trigger (32)Table 8. Absolute maximum ratings for power supply (40)Table 9. Absolute maximum ratings for voltage input (41)Table 10. Absolute maximum ratings for storage temperature (41)Table 11. Recommended operating conditions for power supply (41)Table 12. Recommended operating conditions for voltage input (42)Table 13. Recommended operating conditions for operating temperature (42)Table 14. Electrical characteristics (42)Figure 1. Typical application of MT6260 (9)Figure 2 MT6260 block diagram (18)Figure 3. Ball diagram and top view (19)Figure 4. IO types in state of pins (31)Figure 5. Outlines and dimension of TFBGA 9.6mm*8.6mm, 199-ball, 0.5 mm pitch package (55)Figure 6. Mass production top marking of MT6260 (56)PrefaceAcronyms for register typesR/W For both read and write accessRO Read onlyRC Read only. After the register bank is read, every bit that is HIGH(1) will be cleared to LOW(0) automatically.WO Write onlyW1S Write only. When data bits are written to the register bank, every bit that is HIGH(1) will cause the corresponding bit to be set to 1. Data bits that are LOW(0) have no effects on thecorresponding bit.W1C Write only. When data bits are written to the register bank, every bit that is HIGH(1) will cause the corresponding bit to be cleared to 0. Data bits that are LOW(0) have no effects on the corresponding bit.1 System OverviewMT6260 is a monolithic chip integrating leading edge power management unit, analog baseband and radio circuitry based on the low-power CMOS process.MT6260 is a feature-rich and extremely powerful single-chip solution for high-end GSM/GPRS and EDGE-Rx capability. Based on the 32-bit ARM7EJ-S TM RISC processor, MT6260’s superb processing power, along with high bandwidth architecture and dedicated hardware support, provides a platform for high-performance GPRS/EDGE-Rx Class 12 MODEM application and leading-edge multimedia applications.MT6260 also features:∙ A highly integrated Bluetooth transceiver which is fully compliant with Bluetoothspecification v3.0.∙ A FM receiver supporting both audiobroadcast de-modulation and RDS/RBDSdata decoding.Typical application diagram is shown in Figure 1.PlatformMT6260 is capable of running the ARM7EJ-S TM RISC processor, which provides the besttrade-off between system performance and power consumption.For large amounts of data transfer,high-performance DMA (Direct Memory Access) with hardware flow control is implemented, which greatly enhances the data movement speed while reducing the MCU processing load.Targeted as a media-rich platform for mobile applications, MT6260 also provides hardware security digital rights management for copyright protection. For further safeguard and to protect the manufacturer’s development investment, hardware flash content protection is provided to prevent unauthorized porting of the software load.MemoryMT6260 supports serial flash interface with various operating frequencies.MultimediaThe MT6260 multimedia subsystem provides conventional parallel interface and 2-bit serial interface for CMOS sensors. The camera resolution is up to 2M pixels. Thesoftware-based codec can be used to process various video types. Besides, MT6260 provides fancy UI capabilities through its hardware 2D accelerator. The 2D accelerator performshigh-speed linear transformations with filtering. To take advantage of the high MCU performance, GIF and PNG decoders are implemented by the software.In addition, MT6260 is implemented with ahigh-performance audio synthesis technology,as well as a high-quality audio amplifier to provide superior audio experiences.Connectivity and storageMT6260 supports UART, USB 1.1 FS/LS , SDIO, HIF interface and MMC/SD storage systems. These interfaces provide MT6260 users with the highest level of flexibility in implementinghigh-end solutions.To achieve a complete user interface, MT6260 also brings together all the necessary peripheral blocks for a multimedia GSM/GPRS/EDGE-RX phone. The peripheral blocks include the keypad scanner with the capability to detect multiple key presses, SIM controller, real-time clock, PWM, serial/parallel LCD controller andgeneral-purpose programmable I/Os.AudioUsing a highly integrated mixed-signal audio front-end, the MT6260 architecture provides easy audio interfacing with direct connection to the audio transducers. The audio interface integrates A/D converters for voice band, as well as high-resolution stereo D/A converters for both audio and voice band.MT6260 supports AMR codec to adaptively optimize the quality of speech and audio. Moreover, HE-AAC codec is implemented to deliver CD-quality audio at low bit rates.In addition, a 850mW class-AB amplifier is also embedded to save the BOM cost of adopting external amplifiers.GSM/GPRS/EDGE-Rx radioMT6260 integrates a mixed-signal baseband front-end in order to provide a well-organized radio interface with flexibility for efficient customization. The front-end contains gain and offset calibration mechanisms and filters with programmable coefficients for comprehensive compatibility control on RF modules. MT6260 achieves outstanding MODEM performance by utilizing a highly dynamic range ADC in the RF downlink path.MT6260 embeds a high-performance and completely integrated single-ended SAW-less RF transceiver for multi-band GSM cellular system. In this RF transceiver, a quad-band receiving feature with high sensitivity is supported utilizing one RF receiver and a fully integrated channel filter. With ultra-high dynamic range, the off-chip balun and SAW filters on the receiving path can be removed for BOM cost reduction. In addition, the minimum component count is guaranteed by realizing a highly integrated transmitter, low-spur frequency synthesizer and a Digitally-Controlled Crystal Oscillator (DCXO).Bluetooth radio MT6260 offers a highly integrated Bluetooth radio and baseband processor. Only a minimum of external components are required. MT6260 provides superior sensitivity and class 1 output power and thus ensures the quality of the connection with a wide range of Bluetooth devices.MT6260 is fully compliant with Bluetooth v3.0 and offers enhanced data rates of up to 3Mbps. It also provides the coexistence protocol with 802.11 system.MT6260 supports rich Bluetooth profiles, enabling diversified applications that are widely used on the handset with excellent interoperability.FM radioThe FM radio subsystem provides a completely integrated FM Rx receiver supporting 87.5 ~ 108MHz FM bands with 50kHz tuning step. It also performs fast channel seek/scan algorithm to validate 200 carrier frequencies in 6 seconds. In addition to receiving FM audio broadcasting, the digital RDS/RBDS data system is supported as well. The integrated FM transceiver utilizes state-of-the-art digital demodulation/modulation techniques to achieve excellent performance.In order to achieve high SINAD, good sensitivity and excellent noise suppression, the FM receiver adopts adaptive demodulation scheme to optimize Rx system performance in all ranges of signal quality by reference of a very sophisticated channel quality index (CQI). When the received signal quality is poor, the design not only enhances the ACI rejection capability but also uses a very ingenious skill to soft mute annoying noise so as to provide good perception quality.The FM radio subsystem supports both long antenna, which is usually an earphone, and auto-calibrated short antenna, which is usually a FPC short antenna or shared antenna with GSM for different application scenarios.Debugging functionThe JTAG interface enables in-circuit debugging of the software program with the ARM7EJ-S TM core. With this standardized debugging interface, MT6260 provides developers with a wide set of options in choosing ARM development kits from different third party vendors.Power managementA power management is embedded in MT6260 to provide rich features a high-end feature phone supports, including Li-ion battery charger, high performance and low quiescent current LDOs, and drivers for LED and backlight.MT6260 offers various low-power features to help reduce the system power consumption.MT6260 is also fabricated in an advancedlow-power CMOS process, hence providing an overall ultra-low leakage solution.PackageThe MT6260 device is offered in a9.6mm×8.6mm, 199-ball, 0.5mm pitch, TFBGA package.1.1 Platform FeaturesGeneral∙Integrated voice-band, audio-band and base-band analog front-end∙Integrated full-featured power management unitMCU subsystem∙ARM7EJ-S TM 32-bit RISC processor∙Java hardware acceleration for fastJava-based games and applets∙High-performance multi-layer AHB bus∙Dedicated DMA bus with 15 DMA channels ∙On-chip boot ROM for factory flashprogramming∙Watchdog timer for system crash recovery ∙ 4 sets of general-purpose timers∙Circuit switch data coprocessor∙Division coprocessorSerial flash interfaces∙Supports various operating frequency combinations for serial flash∙Supports QPI and SPI serial flashUser interfaces∙5-row x 5-column keypad controller with hardware scanner∙Supports multiple key presses for gaming ∙Dual SIM/USIM controller with hardware T = 0/T = 1 protocol control∙Real-time clock (RTC) operating with a low-quiescent-current power supply∙General-purpose I/Os (GPIOs) available for auxiliary applications∙ 1 sets of Pulse Width Modulation (PWM) output∙10 external interrupt lines∙ 1 external channel auxiliary 10-bit A/D converter Security∙Supports security key and chip random IDConnectivity∙ 2 UARTs with hardware flow control and supports baud rate up to 921,600 bps∙FS/LS USB 1.1 device controller∙Multimedia card, secure digital Memory Card, host controller with flexible I/O voltage power ∙Supports SDIO interface for SDIOperipherals as well as WIFI connectivity∙DAI/PCM and I2S interface for audioapplications∙I2C master interface for peripheralmanagement including image sensors∙SPI master interface for peripheralmanagement including digital TV chipsPower management∙Li-ion battery charger∙14 LDOs for the power supply of memory card, camera, Bluetooth, RF, SIM card andother diversified usage∙ 4 open-drain output switches tosupply/control the LED∙LDO type vibrator∙One NMOS switch to control keypad LED∙Thermal overload protection∙Under-voltage lock-out protection∙Over-voltage protection∙Different levels of power-down modes with sophisticated software control enablesexcellent power saving performance.Test and debugging∙Built-in digital and analog loop back modes for both audio and baseband front-end∙DAI port complies with GSM Rec.11.10.∙JTAG port for debugging embedded MCU1.2 MODEM FeaturesRadio interface and baseband front-end∙Digital PM data path with baseband front-end ∙High dynamic range delta-sigma ADC converts the downlink analog I and Q signals to digital baseband.∙10-bit D/A converter for Automatic Power Control (APC)∙Programmable radio Rx filter with adaptive gain control∙Dedicated Rx filter for FB acquisition∙4-pin Baseband Parallel Interface (BPI) with programmable driving strength∙Supports multi-bandVoice and modem CODEC∙Dial tone generation∙Voice memo∙Noise reduction∙Echo suppression∙Advanced sidetone oscillation reduction∙Digital sidetone generator withprogrammable gain∙Two programmable acoustic compensation filters∙Supports GSM/GPRS/EDGE-Rx modem∙GSM quad vocoders for adaptive multirate (AMR), enhanced full rate (EFR), full rate (FR) and half rate (HR)∙GSM channel coding, equalization and A5/1, A5/2 and A5/3 ciphering∙GPRS/EDGE-Rx GEA1, GEA2 and GEA3 ciphering∙GPRS packet switched data withCS1/CS2/CS3/CS4 coding schemes∙EDGE-Rx with MCS1-9 receiver coding schemes∙GSM circuit switch data∙GPRS/EDGE-Rx Class 12 ∙Supports SAIC (single antenna interference cancellation) technology∙Supports VAMOS(Voice services over Adaptive Multi-user channels on One Slot)technology in R9 spec.Voice interface and voice front-end∙Two microphone inputs share one low-noise amplifier with programmable gain andAutomatic Gain Control (AGC) mechanisms ∙Voice power amplifier with programmable gain∙2nd order Sigma-Delta A/D converter for voice uplink path∙Shares D/A converter with audio playback path∙Supports full-duplex hands-free operation ∙Compliant with GSM 03.501.3 GSM/GPRS/EDGE RF FeaturesReceiver∙Quad band single-ended input LNAs∙Quadrature RF mixer∙Fully integrated channel filter∙High dynamic range ADC∙24dB PGA gain with 6dB gain stepTransmitter∙Transmitter outputs support quad bands.∙Highly precise and low noise RF transmitter for GSM/GPRS applicationsFrequency synthesizer∙Programmable fractional-N synthesizer∙Integrated wide range RFVCO∙Integrated loop filter∙Fast settling time suitable for multi-slotGPRS/EDGE-Rx applicationsDigitally-Controlled Crystal Oscillator (DCXO)∙Two-pin 26MHz crystal oscillator∙On-chip programmable capacitor array for coarse-tuning∙On-chip programmable capacitor array for fine-tuning∙Low power mode supports 32K crystalremoval1.4 Multimedia FeaturesLCD/ WiFi interface∙Dedicated parallel interface supports 3 external devices with 8-bit for WiFi interface and 8-/9-bit for parallel LCD interface.LCD controller∙Supports simultaneous connection to 2 parallel and 2 serial LCD modules∙LCM formats supported: RGB565, RGB666, RGB888∙Supports LCD module with maximum resolution up to 480x320∙Per pixel alpha channel∙True color engine∙Supports hardware display rotation∙Capable of combining display memories with up to 4 blending layersCamera interface∙YUV422 format image inputJPEG decoder∙Baseline JPEG decoding∙Supports various YUV formats, DC/AC Huffman tables and quantization tablesJPEG encoder∙Motion JPEG encoder for video encoding∙ISO/IEC 10918-1 JPEG baseline mode∙ISO/IEC 10918-2 compliance∙Supports YUV420 and grayscale formats∙Supports EXIF/JFIF∙Standard DC and AC Huffman tables∙Provides 5 levels of encode quality∙Supports zeros shutter delayImage data processing∙Supports 4x digital zoom∙High throughput hardware scaler. Capable of tailoring an image to an arbitrary size. ∙Horizontal scaling with bilinear interpolation ∙Vertical scaling with bilinear interpolation∙YUV and RGB color space conversion∙RGB/YCbCr format thumbnail outputMPEG-4/H.263 CODEC∙Hybrid MPEG4 encoder∙Software-based MPEG4 decoder∙ISO/IEC 14496-2 simple profile:∙ISO/IEC 14496-2 advanced simple profile: ∙Supports visual tools for decoder: I-VOP, P-VOP, B-VOP, AC/DC prediction, 4-MV,unrestricted MV, error resilience, shortheader, global motion compensation,method 1/2 quantization, quarter-pel motion compensation.∙Error resilience for decoder: Sliceresynchronization, data partitioning,reversible VLC∙Supports visual tools for encoder: I-VOP, P-VOP, Half-Pel, DC prediction, unrestricted MV, short headerH.264∙ISO/IEC 14496-10 baseline profile2D accelerator∙Supports 32-bpp ARGB8888, 24-bpp RGB888, 16-bpp RGB565, 24-bppARGB6666.∙ 4 layers overlay with individual color format, window size, source key, constant alpha and rotation∙Rectangle fill with constant∙BitBlt: Capable with 7 rotation types∙Alpha blending with 7 rotation types, per-pixel alpha and pre-multiplied alpha∙Font drawing: Normal font and anti-aliasing font∙Linear transformation: Supports perspective transform, truncate/nearest/bi-linear sample filter.Audio CODEC∙Supports HE-AAC codec decoding∙Supports AAC codec decoding∙Wavetable synthesis with up to 64 tones∙Advanced wavetable synthesizer capable of generating simulated stereo∙Wavetable including GM full set of 128 instruments and 47 sets of percussions∙PCM playback and record∙Digital audio playbackAudio interface and audio front-end∙Supports I2S interface∙High-resolution D/A converters for stereo audio playback∙Voice band A/D converter with digital MIC input support∙Stereo to mono conversion1.5 Bluetooth FeaturesRadio features∙Fully compliant with Bluetooth specification3.0 + EDR∙Low out-of-band spurious emissions support simultaneous operation with GPS andGSM/GPRS worldwide radio systems∙Low-IF architecture with high degree of linearity and high order channel filter∙Integrated T/R switch and Balun∙Fully integrated PA provides 10dBm output power∙-95dBm sensitivity with excellentinterference rejection performance∙Hardware AGC dynamically adjusts receiver performance in changing environmentsBaseband features∙Up to 4 simultaneous active ACL links∙Up to 1 simultaneous SCO or eSCO link with CVSD coding∙Supports eSCO∙Scatternet support: Up to 4 piconetssimultaneously with backgroundinquiry/page scan∙Supports sniff mode∙AFH and PTA collaborative support for WLAN/BT coexistence∙Idle mode and sleep mode enables ultra-low power consumption.∙Supports PCM interface and built-inprogrammable transcoders for linear voicewith re-transmission∙Built-in hardware modem engine for access code correlation, header error correction,forward error correction, CRC, whitening and encryption∙Channel quality driven data rate adaptation ∙Channel assessment for AFHPlatform features ∙Embedded processor for Bluetooth protocol stack with built-in memory system∙Fully verified ROM based system with code patch for feature enhancement1.6 FM Features∙76-108MHz worldwide FM bands with 50kHz tuning step∙Supports RDS/RBDS radio data system∙Supports long/short antenna∙40ms seek time per channel, and 9sec search time for all channels(87.5~108MHz) ∙Superior stereo noise reduction∙Soft mute volume control∙Supports short antenna, auto calibration for different FM channels∙60dB SINAD with 22.5kHz FM deviation∙3dBuVemf FM RX sensitivity with superior interference rejection∙20dBuVemf RDS sensitivity (dev: 2kHz)∙More than 55dBc rejection capability against -200kHz ACI1.7 General DescriptionsFigure 2Error! Reference source not found. is the block diagram of MT6260. Based on amulti-processor architecture, MT6260 integrates an ARM7EJ-S TM core, the main processor running high-level GSM/EDGE-Rx protocol software as well as multimedia applications, single digital signal processor core, which manages the low-level MODEM and advanced audio functions, an embedded processor running Bluetooth baseband and link control protocol and the Bluetooth radio control.MT6260 consists of the following subsystems: ∙Microcontroller Unit (MCU) subsystem: Includes an ARM7EJ-S TM RISC processorand its accompanying memorymanagement and interrupt handling logics ∙Digital Signal Processor (DSP) subsystem: Includes a DSP and its accompanyingmemory, memory controller and interruptcontroller∙MCU/DSP interface: Junction at which the MCU and the DSP exchange hardware andsoftware information∙Microcontroller peripherals: Include all user interface modules and RF control interfacemodules∙Microcontroller coprocessors: Runcomputing-intensive processes in place ofthe microcontroller∙DSP peripherals: Hardware accelerators for GSM/GPRS/EDGE-Rx channel codec∙Multimedia subsystem: Integrates several advanced accelerators to supportmultimedia applications∙Voice front-end: Data path for converting analog speech to and from digital speech ∙Audio front-end: Data path for converting stereo audio from an audio source ∙Baseband front-end: Data path forconverting a digital signal to and from ananalog signal from the RF modules∙Timing generator: Generates the control signals related to the TDMA frame timing∙Power, reset and clock subsystem: Manage the power, reset and clock distributioninside MT6260.∙Bluetooth subsystem: Includes anembedded processor with embeddedROM/RAM system, baseband processor,and a high-performance radio block∙Power management unit: Self-contained power supply source which also controlsthe charging and system startup circuitry.Details of the individual subsystems and blocks are described in the following chapters.2 Product Descriptions2.1 Pin Description2.1.1 Ball DiagramFor MT6260, an TFBGA 9.6mm*8.6mm, 199-ball, 0.5mm pitch package is offered. Pin-outs and the top view are illustrated in Figure 3 for this package.Figure 3. Ball diagram and top view2.1.2 Pin CoordinationTable 1. Pin coordinatesPin# Net name Pin# Net name Pin# Net name A1 AVSS_2G E5 AVSS43_PMU M17 LPCE1_BA11 URXD2 E7 AVSS_2G M18 GNDA12 CMPCLK F10 VDDK M19 GNDA14 CMPDN F14 DVDD18_EMI M2 SPK_OUTNA15 CMDAT5 F15 DVDD18_EMI M3 VBAT_SPKA17 CMMCLK F16 WATCHDOG M6 AVSS43_PMU2.1.3 Detailed Pin DescriptionTable 2. Acronym for pin typesTable 3. PIN function description and power domainTable 4. Acronym for state of pinsTable 5. State of pins1The column “State” of “Reset” shows the pin state during reset. (Input, High Output, Low Output, etc)2The column “Aux” for “Reset” means the default aux function number, shown in the table “Pin Multiplexing, Capability and Settings”. 3The column “PU/PD” for “Reset” means if there is internal pull-up or pull-down when the pin is input in the reset state.2.1.4 Pin Multiplexing, Capability and SettingsTable 6. Acronym for pull-up and pull-down typesTable 7. Capability of PU/PD, driving and Schmitt trigger2.2 Electrical Characteristics2.2.1 Absolute Maximum RatingsTable 8. Absolute maximum ratings for power supplyTable 9. Absolute maximum ratings for voltage inputTable 10. Absolute maximum ratings for storage temperature2.2.2 Recommended Operating ConditionsTable 11. Recommended operating conditions for power supplyTable 12. Recommended operating conditions for voltage inputTable 13. Recommended operating conditions for operating temperature2.2.3 Electrical Characteristics under Recommended Operating ConditionsTable 14. Electrical characteristics。
识别MTK平台手机主板芯片型号方法之欧阳语创编
想自检吗？识别MTK平台手机主板芯片型号方法时间：2021.03.01 创作：欧阳语来源：山寨后院评论：5 时间：2009-10-06在手机键盘上输入*#66*#六个字符，如果是MTK平台的手机，就会进入手机的“VERSION”信息界面,也就是“版本信息”栏目，往下翻动子目录，停在“BB Chip”一项上，就会显示出主板的芯片型号，通过这个办法可以查到山寨机芯片型号是“MT62??”。
识别MTK手机芯片型号的简单方法插上数据线，连接到电脑，当电脑提示找到硬件时，会有芯片型号提示，装好USB驱动后，在同步软件里设置到您的手机对应芯片型号即可同步!如果还看不到下载下面的工具UnknownDeviceIdentifier.这是一个识别机器里未知设备的小工具。
关于MTK的基础知识国产手机与洋品牌捉对厮杀之际，一个巨大的、阴影般的市场正在形成——这个几乎克隆了洋品牌与国产手机各自优势的灰色手机制造行业，不但迅速地抢占了部分市场份额，同时还改变了整个手机产业链的生态，据权威研究机构称，联发科技(MTK)在大陆灰色手机平台市场份额达69%关于MTK检测指令：目前MP3&MP4手机市场上的手机基本都只换了外壳,主板和平台就那么几个配套公司做的,拿到机器,输入版本指令便可以知道是那家的主板和平台了.为了很好的使用MTK智能王,在拿到用户手机时,通过指令来鉴别手机是否是MTK平台的手机就很有必要了,以下指令只要有一项指令能符合,那么就可以鉴别该手机是MTK平台的。
MTK恢复原厂初始密码：112235E8D2H ---- 数据(数字)：*#3646633#工程模式*#66*#35E8E4H ---- 数据(数字)：*#87# AUTO TEST35E8EAH ---- 数据(数字)：*#33778#序号289BFCH ---- 数据(数字)：*#0044#设为英文289C44H ---- 数据(数字)：*#0086#设为简体2BA334H ---- 数据(数字)：*#0886#繁体中文.以下测试指令根据不同手机方案公司指令有所不同:方案配套指令 TEST指令MTK SIMCOM *#189# *#889#MTK 龙旗 *#8375#第三步：确定了是MTK手机，大家再来看看是否支持MRP游戏和软件：手机输入*#220807#然后按拨号键，如果手机打开进入应用列表或打开网页，说明支持。
MT6260 客户入门手册 v1.0(1)
TBD
-8-
Ball Map
DCC
Design Notice
Documents and Reference Design Package
Item Reference Design (60D/M/S SCH) System DCC Path MediaTek DCC > Document Tree > HW > Feature Phone > 2G > MT6260 > Reference Design > MT6260_D_M_S_ REF SCH_V1.0.DSN
MT6260 Handbook for HWPM
2013.1.6
Together, We make the difference.
Product Information
Together, We make the difference.
6260 Series Snapshot
Modem Memory Size Memory Speed CPU LCM resolution LCM I/F Camera resolution Camera I/F RX RAW 32k PCB
MT6260原理图和PCB 评审注意事项_V1.0
(BPI_BUS1 , BPI_BUS3 ) 00 : X(BPI_BUS1 , BPI_BUS3 ) 01 : KEYPAD (BPI_BUS1 , BPI_BUS3 ) 10 : MSDC (BPI_BUS1 , BPI_BUS3 ) 11 : CAMR9726R / 10 / K / 040244R9731R / 1 / K / 0402 /NC□□□□□□□□□□□□□□□□FMRF□ATV□□□□□□□□ATV □□□□□□□□□□□□□□□□WIFI2,792,79FM天线走线(耳机GND)靠近耳机口位置放置100nH电感到地;用USB口作FM天线,且GND作充电回流,其GND到地放置耐流大于500mA电感或磁珠;在FM天线(LANT/SANT)走线靠近外端放置TVS, (TVS or varistor Cpf<5pF,M0G180M030R 3pF)VIO18输出pin并连1uF Cap,串0 ohm for de-sense，耐流300mA);輸出到(F14/F15)两个Pin. 靠近这两个pin再放置1uFCap;VA(U6 pin) 输出pin并联1uF Cap，Cap 的GND要和AVSS28_ABB(U4 pin) 要有较好的连通性，保证good groundreturn.MP3_OUTL/R 靠近Chip必须添加 1.8k@100M beads，如BLM15BD182SN1請務必使用MTK驗證之26MHz晶體 和TXMMT6260 RX Trace 預留一組預留 L 型网络MT6260 RX 連接到TXM之間預留 L 型网络並串接DC-block電容(若確認使用的TXM不需要外部DC-block電容，可以視情況移除)MT6260 TX trace到TXM間預留PI型网络增加調適彈性MT6260 FREF連接到MT5931 or ATV co-clock時, 可預留0402電容到地以及串接0 ohm for debugVRF連接到MT6260並聯一顆0.1uF電容到地晶体的PIN1接芯片的A6，PIN3接芯片的B6确认PA是否内部有集成隔直电容，否则MT6260TX和PA之间要加隔直电容。
MTK-6260A_MT5931_MT5193手机原理图
CMDAT7 CMDAT6 CMDAT5 CMDAT4 CMDAT3 CMDAT2 CMDAT1 CMDAT0 CMPDN
VCORE VCCBB18 VCCBB28 VSF VRF VA VREF BACKUP VCAMD ATV_VCC_RF VMC VUSB VIBR VSIM1 VSIM2
1
1
PMU LDO
TP305
2
2
2
2
1
shieding case ¥~
XP YP
XP YP
9 9
SYS_CTL
WATCHDOG SRCLKENAI TESTMODE GND GND GND GND GND GND GND GND GND GND GND
USB
USB_DM USB_DP USB_DM USB_DP 10 10
C
MT6260
SYS CTL
EINT_WIFI R207 6 SRCLKENAI R / 0 / ohm / 0402 SRCLKENAI_60
GPIO_WIFI_RST ATV_PWREN ATV_RST
GPIO_WIFI_RST ATV_PWREN ATV_RST 7 7
6
ADC
NLD0 NLD1 NLD2 NLD3 NLD4 NLD5 NLD6 NLD7 NLD8
USB
USB11_DM USB11_DP
U13 T13
USB_DM USB_DP
MT6260简介
MT6260简介Document Revision HistoryTable of ContentsDocument Revision History (2)Table of Contents (3)Preface (5)1System Overview (6)1.1Platform Features (10)1.2MODEM Features (11)1.3GSM/GPRS/EDGE RF Features (12)1.4Multimedia Features (13)1.5Bluetooth Features (15)1.6FM Features (16)1.7General Descriptions (17)2Product Descriptions (19)2.1Pin Description (19)2.2Electrical Characteristics (40)2.3Package Information (52)2.4Ordering Information (56)Lists of Tables and FiguresTable 1. Pin coordinates (19)Table 2. Acronym for pin types (21)Table 3. PIN function description and power domain (21) Table 4. Acronym for state of pins (27)Table 5. State of pins (27)Table 6. Acronym for pull-up and pull-down types (31)Table 7. Capability of PU/PD, driving and Schmitt trigger (32) Table 8. Absolute maximum ratings for power supply (40)Table 9. Absolute maximum ratings for voltage input (41)Table 10. Absolute maximum ratings for storage temperature (41)Table 11. Recommended operating conditions for power supply (41)Table 12. Recommended operating conditions for voltage input (42)Table 13. Recommended operating conditions for operating temperature (42)Table 14. Electrical characteristics (42)Figure 1. Typical application of MT6260 (9)Figure 2 MT6260 block diagram (18)Figure 3. Ball diagram and top view (19)Figure 4. IO types in state of pins (31)Figure 5. Outlines and dimension of TFBGA 9.6mm*8.6mm, 199-ball, 0.5 mm pitch package (55)Figure 6. Mass production top marking of MT6260 (56)PrefaceAcronyms for register typesR/W For both read and write accessRO Read onlyRC Read only. After the register bank is read, every bit that is HIGH(1) will be cleared to LOW(0) automatically.WO Write onlyW1S Write only. When data bits are written to the register bank, every bit that is HIGH(1) will cause the corresponding bit to be set to 1. Data bits that are LOW(0) have no effects on the corresponding bit.W1C Write only. When data bits are written to the register bank, every bit that is HIGH(1) will cause the corresponding bit to be cleared to 0. Data bits that are LOW(0) have no effects on the corresponding bit.1 System OverviewMT6260 is a monolithic chip integrating leading edge power management unit, analog baseband and radio circuitry based on the low-power CMOS process.MT6260 is a feature-rich and extremely powerful single-chip solution for high-end GSM/GPRS and EDGE-Rx capability. Based on the 32-bit ARM7EJ-S TM RISC processor, MT6260’s superb processing power, along with high bandwidth architecture and dedicated hardware support, provides a platform for high-performance GPRS/EDGE-Rx Class 12 MODEM application and leading-edge multimedia applications.MT6260 also features:A highly integrated Bluetooth transceiver which is fully compliant with Bluetoothspecification v3.0.A FM receiver supporting both audiobroadcast de-modulation and RDS/RBDSdata decoding.Typical application diagram is shown in Figure 1.PlatformMT6260 is capable of running the ARM7EJ-S TM RISCprocessor, which provides the besttrade-off between system performance and power consumption.For large amounts of data transfer,high-performance DMA (Direct Memory Access) with hardware flow control is implemented, which greatly enhances the data movement speed while reducing the MCU processing load.Targeted as a media-rich platform for mobile applications, MT6260 also provides hardware security digital rights management for copyright protection. For further safeguard and to protect the manufacturer’s development investment, hardware flash content protection is provided to prevent unauthorized porting of the software load.MemoryMT6260 supports serial flash interface with various operating frequencies.MultimediaThe MT6260 multimedia subsystem provides conventional parallel interface and 2-bit serial interface for CMOS sensors. The camera resolution is up to 2M pixels. Thesoftware-based codec can be used to process various video types. Besides, MT6260 provides fancy UI capabilities through its hardware 2D accelerator. The 2D accelerator performs high-speed linear transformations with filtering. To take advantage of the high MCU performance, GIF and PNG decoders are implemented by the software.In addition, MT6260 is implemented with ahigh-performance audio synthesis technology,as well as a high-quality audio amplifier to provide superioraudio experiences.Connectivity and storageMT6260 supports UART, USB 1.1 FS/LS , SDIO, HIF interface and MMC/SD storage systems. These interfaces provide MT6260 users with the highest level of flexibility in implementing high-end solutions.To achieve a complete user interface, MT6260 also brings together all the necessary peripheral blocks for a multimedia GSM/GPRS/EDGE-RX phone. The peripheral blocks include the keypad scanner with the capability to detect multiple key presses, SIM controller, real-time clock, PWM, serial/parallel LCD controller andgeneral-purpose programmable I/Os.AudioUsing a highly integrated mixed-signal audio front-end, the MT6260 architecture provides easy audio interfacing with direct connection to the audio transducers. The audio interface integrates A/D converters for voice band, as well as high-resolution stereo D/A converters for both audio and voice band.MT6260 supports AMR codec to adaptively optimize the quality of speech and audio. Moreover, HE-AAC codec is implemented to deliver CD-quality audio at low bit rates.In addition, a 850mW class-AB amplifier is also embedded to save the BOM cost of adopting external amplifiers.GSM/GPRS/EDGE-Rx radioMT6260 integrates a mixed-signal baseband front-end in order to provide a well-organized radio interface with flexibility for efficient customization. The front-end contains gain and offset calibration mechanisms and filters with programmable coefficients for comprehensive compatibility control on RFmodules. MT6260 achieves outstanding MODEM performance by utilizing a highly dynamic range ADC in the RF downlink path.MT6260 embeds a high-performance and completely integrated single-ended SAW-less RF transceiver for multi-band GSM cellular system. In this RF transceiver, a quad-band receiving feature with high sensitivity is supported utilizing one RF receiver and a fully integrated channel filter. With ultra-high dynamic range, the off-chip balun and SAW filters on the receiving path can be removed for BOM cost reduction. In addition, the minimum component count is guaranteed by realizing a highly integrated transmitter, low-spur frequency synthesizer and a Digitally-Controlled Crystal Oscillator (DCXO).Bluetooth radio MT6260 offers a highly integrated Bluetooth radio and baseband processor. Only a minimum of external components are required. MT6260 provides superior sensitivity and class 1 output power and thus ensures the quality of the connection with a wide range of Bluetooth devices.MT6260 is fully compliant with Bluetooth v3.0 and offers enhanced data rates of up to 3Mbps. It also provides the coexistence protocol with 802.11 system.MT6260 supports rich Bluetooth profiles, enabling diversified applications that are widely used on the handset with excellent interoperability.FM radioThe FM radio subsystem provides a completely integrated FM Rx receiver supporting 87.5 ~ 108MHz FM bands with 50kHz tuning step. It also performs fast channel seek/scan algorithm to validate 200 carrier frequencies in 6 seconds. In addition to receiving FM audio broadcasting, the digital RDS/RBDS data system is supported as well. The integrated FM transceiverutilizes state-of-the-art digital demodulation/modulation techniques to achieve excellent performance.In order to achieve high SINAD, good sensitivity and excellent noise suppression, the FM receiver adopts adaptive demodulation scheme to optimize Rx system performance in all ranges of signal quality by reference of a very sophisticated channel quality index (CQI). When the received signal quality is poor, the design not only enhances the ACI rejection capability but also uses a very ingenious skill to soft mute annoying noise so as to provide good perception quality.The FM radio subsystem supports both long antenna, which is usually an earphone, and auto-calibrated short antenna, which is usually a FPC short antenna or shared antenna with GSM for different application scenarios.Debugging functionThe JTAG interface enables in-circuit debugging of the software program with the ARM7EJ-S TM core. With this standardized debugging interface, MT6260 provides developers with a wide set of options in choosing ARM development kits from different third party vendors.Power managementA power management is embedded in MT6260 to provide rich features a high-end feature phone supports, including Li-ion battery charger, high performance and low quiescent current LDOs, and drivers for LED and backlight.MT6260 offers various low-power features to help reduce the system power consumption.MT6260 is also fabricated in an advancedlow-power CMOS process, hence providing an overall ultra-low leakage solution.PackageThe MT6260 device is offered in a9.6mm×8.6mm, 199-ball, 0.5mm pitch, TFBGA package.1.1 Platform FeaturesGeneralIntegrated voice-band, audio-band and base-band analog front-endIntegrated full-featured power management unitMCU subsystemARM7EJ-S TM 32-bit RISC processorJava hardware acceleration for fastJava-based games and appletsHigh-performance multi-layer AHB busDedicated DMA bus with 15 DMA channels ?On-chip boot ROM for factory flashprogrammingWatchdog timer for system crash recovery ? 4 sets of general-purpose timersCircuit switch data coprocessorDivision coprocessorSerial flash interfacesSupports various operating frequency combinations for serial flashSupports QPI and SPI serial flashUser interfaces5-row x 5-column keypad controller with hardware scanner Supports multiple key presses for gaming ?Dual SIM/USIM controller with hardware T = 0/T = 1 protocol control Real-time clock (RTC) operating with a low-quiescent-current power supplyGeneral-purpose I/Os (GPIOs) available for auxiliary applications1 sets of Pulse Width Modulation (PWM) output10 external interrupt lines1 external channel auxiliary 10-bit A/D converter SecuritySupports security key and chip random IDConnectivity2 UARTs with hardware flow control and supports baud rate up to 921,600 bpsFS/LS USB 1.1 device controllerMultimedia card, secure digital Memory Card, host controller with flexible I/O voltage power ?Supports SDIO interface for SDIOperipherals as well as WIFI connectivityDAI/PCM and I2S interface for audioapplicationsI2C master interface for peripheralmanagement including image sensorsSPI master interface for peripheralmanagement including digital TV chipsPower managementLi-ion battery charger14 LDOs for the power supply of memory card, camera, Bluetooth, RF, SIM card andother diversified usage4 open-drain output switches tosupply/control the LEDLDO type vibratorOne NMOS switch to control keypad LEDThermal overload protectionUnder-voltage lock-out protectionOver-voltage protectionDifferent levels of power-down modes with sophisticated software control enablesexcellent power saving performance.Test and debuggingBuilt-in digital and analog loop back modes for both audio and baseband front-endDAI port complies with GSM Rec.11.10.JTAG port for debugging embedded MCU1.2 MODEM FeaturesRadio interface and baseband front-endDigital PM data path with baseband front-end ?High dynamic range delta-sigma ADC converts the downlink analog I and Q signals to digital baseband.10-bit D/A converter for Automatic Power Control (APC)Programmable radio Rx filter with adaptive gain controlDedicated Rx filter for FB acquisition4-pin Baseband Parallel Interface (BPI) with programmable driving strengthSupports multi-bandVoice and modem CODECDial tone generationVoice memoNoise reductionEcho suppressionAdvanced sidetone oscillation reductionDigital sidetone generator withprogrammable gainTwo programmable acoustic compensation filtersSupports GSM/GPRS/EDGE-Rx modemGSM quad vocoders for adaptive multirate (AMR), enhanced full rate (EFR), full rate (FR) and half rate (HR)GSM channel coding, equalization and A5/1, A5/2 and A5/3 cipheringGPRS/EDGE-Rx GEA1, GEA2 and GEA3 cipheringGPRS packet switched data withCS1/CS2/CS3/CS4 coding schemesEDGE-Rx with MCS1-9 receiver coding schemesGSM circuit switch dataGPRS/EDGE-Rx Class 12 ?Supports SAIC (single antenna interference cancellation) technologySupports VAMOS(Voice services over Adaptive Multi-user channels on One Slot)technology in R9 spec.Voice interface and voice front-endTwo microphone inputs share one low-noise amplifier with programmable gain andAutomatic Gain Control (AGC) mechanisms ?Voice power amplifier with programmable gain2nd order Sigma-Delta A/D converter for voice uplink path Shares D/A converter with audio playback pathSupports full-duplex hands-free operation ?Compliant with GSM 03.501.3 GSM/GPRS/EDGE RF FeaturesReceiverQuad band single-ended input LNAsQuadrature RF mixerFully integrated channel filterHigh dynamic range ADC24dB PGA gain with 6dB gain stepTransmitterTransmitter outputs support quad bands.Highly precise and low noise RF transmitter for GSM/GPRS applicationsFrequency synthesizerProgrammable fractional-N synthesizerIntegrated wide range RFVCOIntegrated loop filterFast settling time suitable for multi-slotGPRS/EDGE-Rx applicationsDigitally-Controlled Crystal Oscillator (DCXO)Two-pin 26MHz crystal oscillatorOn-chip programmable capacitor array for coarse-tuningOn-chip programmable capacitor array for fine-tuningLow power mode supports 32K crystalremoval1.4 Multimedia FeaturesLCD/ WiFi interfaceDedicated parallel interface supports 3 external devices with 8-bit for WiFi interface and 8-/9-bit for parallel LCD interface.LCD controllerSupports simultaneous connection to 2 parallel and 2 serial LCD modulesLCM formats supported: RGB565, RGB666, RGB888Supports LCD module with maximum resolution up to 480x320Per pixel alpha channelTrue color engineSupports hardware display rotationCapable of combining display memories with up to 4 blending layersCamera interfaceYUV422 format image inputJPEG decoderBaseline JPEG decodingSupports various YUV formats, DC/AC Huffman tables and quantization tablesJPEG encoderMotion JPEG encoder for video encodingISO/IEC 10918-1 JPEG baseline modeISO/IEC 10918-2 complianceSupports YUV420 and grayscale formatsSupports EXIF/JFIFStandard DC and AC Huffman tablesProvides 5 levels of encode qualitySupports zeros shutter delayImage data processingSupports 4x digital zoomHigh throughput hardware scaler. Capable of tailoring an image to an arbitrary size. ?Horizontal scaling with bilinear interpolation ?Vertical scaling with bilinear interpolation YUV and RGB color space conversionRGB/YCbCr format thumbnail outputMPEG-4/H.263 CODECHybrid MPEG4 encoderSoftware-based MPEG4 decoderISO/IEC 14496-2 simple profile:ISO/IEC 14496-2 advanced simple profile: ?Supports visual tools for decoder: I-VOP, P-VOP, B-VOP, AC/DC prediction, 4-MV, unrestricted MV, error resilience, shortheader, global motion compensation,method 1/2 quantization, quarter-pel motion compensation.Error resilience for decoder: Sliceresynchronization, data partitioning,reversible VLCSupports visual tools for encoder: I-VOP, P-VOP, Half-Pel, DC prediction, unrestricted MV, short headerH.264ISO/IEC 14496-10 baseline profile2D acceleratorSupports 32-bpp ARGB8888, 24-bpp RGB888, 16-bpp RGB565, 24-bppARGB6666.4 layers overlay with individual color format, window size, source key, constant alpha and rotationRectangle fill with constantBitBlt: Capable with 7 rotation typesAlpha blending with 7 rotation types, per-pixel alpha and pre-multiplied alphaFont drawing: Normal font and anti-aliasing fontLinear transformation: Supports perspective transform, truncate/nearest/bi-linear sample filter.Audio CODECSupports HE-AAC codec decodingSupports AAC codec decodingWavetable synthesis with up to 64 tonesAdvanced wavetable synthesizer capable of generating simulated stereoWavetable including GM full set of 128 instruments and 47 sets of percussionsPCM playback and recordDigital audio playbackAudio interface and audio front-endSupports I2S interfaceHigh-resolution D/A converters for stereo audio playbackVoice band A/D converter with digital MIC input supportStereo to mono conversion1.5 Bluetooth FeaturesRadio featuresFully compliant with Bluetooth specification3.0 + EDRLow out-of-band spurious emissions support simultaneous operation with GPS andGSM/GPRS worldwide radio systemsLow-IF architecture with high degree of linearity and high order channel filterIntegrated T/R switch and BalunFully integrated PA provides 10dBm output power-95dBm sensitivity with excellentinterference rejection performanceHardware AGC dynamically adjusts receiver performance in changing environmentsBaseband featuresUp to 4 simultaneous active ACL linksUp to 1 simultaneous SCO or eSCO link with CVSD coding Supports eSCOScatternet support: Up to 4 piconetssimultaneously with backgroundinquiry/page scanSupports sniff modeAFH and PTA collaborative support for WLAN/BT coexistence Idle mode and sleep mode enables ultra-low power consumption.Supports PCM interface and built-inprogrammable transcoders for linear voicewith re-transmissionBuilt-in hardware modem engine for access code correlation, header error correction,forward error correction, CRC, whitening and encryptionChannel quality driven data rate adaptation ?Channel assessment for AFHPlatform features ?Embedded processor for Bluetooth protocol stack with built-in memory systemFully verified ROM based system with code patch for feature enhancement1.6 FM Features76-108MHz worldwide FM bands with 50kHz tuning stepSupports RDS/RBDS radio data systemSupports long/short antenna40ms seek time per channel, and 9sec search time for all channels(87.5~108MHz) ?Superior stereo noise reduction Soft mute volume controlSupports short antenna, auto calibration for different FM channels60dB SINAD with 22.5kHz FM deviation3dBuVemf FM RX sensitivity with superior interference rejection20dBuVemf RDS sensitivity (dev: 2kHz)More than 55dBc rejection capability against -200kHz ACI1.7 General DescriptionsFigure 2Error! Reference source not found. is the block diagram of MT6260. Based on amulti-processor architecture, MT6260 integrates an ARM7EJ-S TM core, the main processor running high-level GSM/EDGE-Rx protocol software as well as multimedia applications, single digital signal processor core, which manages the low-level MODEM and advanced audio functions, an embedded processor running Bluetooth baseband and link control protocol and the Bluetooth radio control.MT6260 consists of the following subsystems: ?Microcontroller Unit (MCU) subsystem: Includes an ARM7EJ-S TM RISC processorand its accompanying memorymanagement and interrupt handling logics ?Digital Signal Processor (DSP) subsystem: Includes a DSP and its accompanying memory, memory controller and interruptcontrollerMCU/DSP interface: Junction at which the MCU and the DSP exchange hardware andsoftware informationMicrocontroller peripherals: Include all user interface modules and RF control interfacemodulesMicrocontroller coprocessors: Runcomputing-intensive processes in place ofthe microcontrollerDSP peripherals: Hardware accelerators for GSM/GPRS/EDGE-Rx channel codecMultimedia subsystem: Integrates several advanced accelerators to supportmultimedia applicationsVoice front-end: Data path for converting analog speech to and from digital speech ?Audio front-end: Data path for converting stereo audio from an audio source ?Baseband front-end: Data path forconverting a digital signal to and from ananalog signal from the RF modulesTiming generator: Generates the control signals related to the TDMA frame timingPower, reset and clock subsystem: Manage the power, reset and clock distributioninside MT6260.Bluetooth subsystem: Includes anembedded processor with embeddedROM/RAM system, baseband processor,and a high-performance radio blockPower management unit: Self-contained power supplysource which also controlsthe charging and system startup circuitry.Details of the individual subsystems and blocks are described in the following chapters.2 Product Descriptions2.1 Pin Description2.1.1 Ball DiagramFor MT6260, an TFBGA 9.6mm*8.6mm, 199-ball, 0.5mm pitch package is offered. Pin-outs and the top view are illustrated in Figure 3 for this package.Figure 3. Ball diagram and top view2.1.2 Pin CoordinationTable 1. Pin coordinatesPin# Net name Pin# Net name Pin# Net name A1 AVSS_2G E5 AVSS43_PMU M17 LPCE1_BA11 URXD2 E7 AVSS_2G M18 GNDA12 CMPCLK F10 VDDK M19 GNDA14 CMPDN F14 DVDD18_EMI M2 SPK_OUTNA15 CMDAT5 F15 DVDD18_EMI M3 VBAT_SPKA17 CMMCLK F16 WATCHDOG M6 AVSS43_PMU。
MT6261A驱动
MT6261A驱动最近搞起了手机驱动，刚开始接手的工作都是MTK平台的功能机方案，从6250开始到6260，一边学习一边搞了LCD、Camera、Flash、Keypad、LED等。
虽然是刚上手吧，但是我有深厚的单片机基础，又在学习STM32时候学习果uCOSII，学过ARM+Linux，所以对于搞功能机的驱动也是毫无困难。
最近刚搞的是MT6261的，搞6250和6260时候还有个参考，有以前好使的代码，比猫画虎都能完成任务，但是6261的公司以前都没搞过，代码也是最原始的，所以这也是自己又一个台阶吧！自我感觉以后要改一改以前学习的习惯，不能搞过了就搞过了，没过多久就忘了，时间一长看看自己曾经搞过的东西都怀疑那是谁的作品。
以后要多做总结，不能懒，最好将自己的点点滴滴都记录一下，这样才有利于不断的总结，不断的进步！言归正传，说说最近搞6261的过程吧！搞6261其实挺蛋疼的，遇到不少麻烦。
首先，拿到原始代码和板子之后首要任务就是先能够编译程序、下载、并且开机。
原始代码经过一些定制后先要能够编译通过，这个经过老大一阵忙活就OK了。
但是当我拿到板子，按照板子的原理设计，根据所选Flash型号在代码中更改后怎么也无法下载。
一直提示的内容是软件的Flash_ID 和检测到的不一样，于是我就查找原因，正常情况下改Flash的配置只需要改动MemoryDeviceList和custom_MemoryDevice.h就可以，在custom_MemoryDevice.h中改成自己用到的Flash型号，在MemoryDeviceList中查找自己用的Flash型号，如果没有的话添加。
别的地方没必要改动啊，这个纠结，一顿忙活，后来怀疑是Flash_T ool有问题，但是后来又搞了搞几个版本的都一样的，又在软件上一顿怀疑一顿改，但是都是不行，知道一周多厚查出来是硬件设计的问题，BB芯片上和Flash的接口应该是GPIO4~GPIO9，但是却接到了GPIO3~GPIO8，措了一个脚，简直晕死！查到原因后先做了简单的飞线，虽然丑，但是总算可以下载程序了！为了更多的验证问题，下载OK后我又改动了一些内容，发现了一个问题：我用的Flash型号是W25Q128FWPIM，原来的MemoryDeviceList中有MTK_INTERNAL_W25Q128FWIM，用MTK_INTERNAL_W25Q128FWIM是不可以的，另外，在MemoryDeviceList_MT6250_Since11BW1212.xls中有W25Q128FWPIM这一栏，但是复制这一栏到MemoryDeviceList_MT6261_Since11CW1352.xls后却无法正常开机，现象为按下开机键后有开机画面但是停顿大概2秒后黑屏死机。
ISL6260A芯片各引脚定义
电子支付现状分析报告电子信息技术以及网络的迅猛发展和大范围普及，为社会经济发展的变革打起了新的旗帜。
电子商务的发展步伐越来越快，它披荆斩棘，破旧立新，彻底改变传统的商务发展模式，并在很短的时间内显示出巨大的经济效益和社会效益。
由此产生的一系列相关产业和行业的运作方式的变革给社会经济发展开创了全新的发展方向。
电子支付作为电子商务的结算方式，在短短几年内从“跑龙套”变成社会经济舞台上的新星。
仅07年，中国第三方电子支付就达到了1亿3千万美金的交易额。
其发展过程中所涉及的法律，经营模式等问题引起了大范围的讨论和研究，成为经济弄潮儿的聚焦重点。
经过研究分析，可从四个方面来具体分析电子支付的现状：一、国外电子支付现状美国早在1993年就已有2.4万家企业使用电子数据交换(EDI)。
随后，美国所有的大公司都实现了办公自动化，一些跨国公司还实现了虚拟办公室。
美国企业的信息化建设已经进入了比较高级的阶段：60%的小企业、80%的中型企业、90%以上的大企业已借助互联网广泛开展电子商务活动，其中B2B占电子商务总额的80%以上。
如美国思科(CISCO)公司把管理和运营成功地迁移到了互联网上，其全部产品(路由器、交换机和其它网络互联设备)建立了虚拟的订货系统，目前，思科在全球范围内80%的订单通过网络来处理。
当今无论从网络科技还是商业经济都处于领先地位的美国，其独特的民族文化为B2B 电子商务的迅速普及提供了良好的条件。
美国人敢于冒险，往往不为各条条框框所束缚，敢于创新并乐于接受新生事物。
面对B2B电子商务带来的无限商机，他们不是怀疑，而是用热忱的态度去拥抱这一新的机遇。
二、我国电子支付现状二十世纪以来，随着电子计算机工业和互联网的不断发展，电子计算机的应用领域也在不断扩大，在经济贸易领域出现了前所未有的电子商务（Electronic Commerce），即系统地利用各种电子工具和网络，高效率、低成本地从事以商品交换为中心的各种以电子方式实现商业贸易活动。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
VDD_EMI VDD_EMI VDD_EMI VDD_EMI VDD_EMI VDD_EMI VDD_EMI VDD_EMI VDD33 VDD33 VDD33 VDD33 VDD33 VDD33 VDD33 VDD33 VDD33 VDD33 VDD33 VDD33 VDD33
LPA0 LPCE0_B Design output high LSCE1_B Design output high LPCE1_B Design output high LSRSTB WATCHDOG LPTE LPRSTB CMDAT0 CMDAT1 CMDAT2 CMDAT3 CMDAT4 CMDAT5 CMDAT6 CMDAT7 CMHREF CMVREF CMPDN(SF voltage) (HW trap) 0:1.8V 1:3.0V CMMCLK CMPCLK CMRST(USB 2vcom) (HW trap) 0: disabled(default) 1: enabled EDIDAT
VDD33
VDD33
VDD33
BPI_BUS3 Design output low 00: X (BPI_BUS1 , BPI_BUS3 ) 01 : KEYPAD (BPI_BUS1 , BPI_BUS3 ) 10: MSDC (BPI_BUS1 , BPI_BUS3 ) 11 :CAM (BPI_BUS1 , BPI_BUS3 )
EINT5 (MCINS)
PD
PU HIGH PD PD PD PD PD PD PD PD PD PD PD PD PD PD PD
MCCK MCDA0 MCCM0 NLD8 NLD7 NLD6 NLD5 NLD4 NLD3 NLD2 NLD1 NLD0 LWRB LRDB
IN OUT OUT OUT IN OUT IN IN IN IN IN IN IN IN IN IN IN IN IN (reset) OUT (default) IN IN
GPIO39 GPIO40 GPIO41 GPIO42 GPIO43 GPIO44 GPIO45 GPIO46 GPIO47 GPIO48 GPIO49 GPIO50 GPIO51 GPIO52 GPIO53 GPIO54 GPIO55 GPIO56 GPIO57 GPIO58 GPIO59
LPA0 LPCE0B LSCE1B LPCE1B LSRSTB
Mode 1 EDICK SCL28 SDA28 MCDA1 MCDA2 KCOL4 KCOL3 KCOL2 KCOL1 KCOL0 MCDA3 KROW4 KROW3 KROW2 KROW1 KROW0 GPSFSYNC BPIBUS5 EDIWS BPIBUS4 U2RXD U2TXD U1RXD U1TXD
PWM
EINT8
EINT30 EINT31 EINT32 EINT33
Function
6260 EDICK(ATV) SCL(Camera/5193/motion/) SDA(Camera/5193/mption)
MCDA1 MCDA2
KCOL4 KCOL3 KCOL2 KCOL1 KCOL0
MCDA3
(JTAG trap)
VDD33
BPI_BUS2 Design output low
VDD33
BPI_BUS1 Design output low trap) BPI_BUS3 ) 01 : KEYPAD (BPI_BUS1 , BPI_BUS3 ) 10: MSDC (BPI_BUS1 , BPI_BUS3 ) 11 :CAM (BPI_BUS1 , BPI_BUS3 )
GPIO65 GPIO66 GPIO67 GPIO68 GPIO69 GPIO70 GPIO71 GPIO72 GPIO73 GPIO74 AGPI75 AGPI76 AGPI77 AGPI78 AGPO79 AGPI80 AGPI81 AGPI82
BPIBUS0 SFSCS1 SFSWP SFSCS0 SFSCK SFSIN SFSOUT SFSHOLD SRCLKENAI RESETB
Mode 0 GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 GPIO7 GPIO8 GPIO9 GPIO10 GPIO11 GPIO12 GPIO13 GPIO14 GPIO15 GPIO16 GPIO17 GPIO18 GPIO19 GPIO20 GPIO21 GPIO22 GPIO23 GPIO24 GPIO25 GPIO26 GPIO27 GPIO28 GPIO29 GPIO30 GPIO31 GPIO32 GPIO33 GPIO34 GPIO35 GPIO36 GPIO37 GPIO38
FMJTRSTB2 JTRSTB2
U1RTS U1CTS
BTPRI CLKO0 EINT4
SPIMOSI0 SPIMISO0
JTRTCK1 FMJTRSTB1 JTRSTB1 FMJTDO1 JTDO1 CMMCLK CMCSK CMRST CMCSD CMPDN CMCSD1
HIGH HIGH LOW
PU
HIGH HIGH
PD
EINT34 EINT35 EINT36
Mode 2 PWM
Mode 3 EINT0
Mode 4 SPISCK0 SPICS0 FMJTDI1
Mode 5 D1_ICK D1_IMS JTDI1 JTMS1 JTDI2 JTMS2 JTCK2
Mode 6
Pin NAME EDICK SCL28 SDA28 MCDA1 MCDA2 KCOL4 KCOL3 KCOL2 KCOL1 KCOL0 (USBDL) 0 : USB download mode 1 : Normal bootup mode MCDA3 KROW4 KROW3 KROW2 KROW1 KROW0 GPIO16 GPIO17 EDIWS GPIO19 URXD2 UTXD2 URXD1 UTXD1 Design output high MCINS MCCK MCDA0 MCCM0 NLD8 NLD7 NLD6 NLD5 NLD4 NLD3 NLD2 NLD1 NLD0 LWR_B LRD_B
IN (reset) OUT (default)
PD(reset) BPIBUS3 LOW (default)
GPIO62
BPIBUS3
OUT
LOW
BPIBUS2
GPIO63
BPIBUS2
IN (reset) OUT (default)
PD(reset) BPIBUS1 LOW (default)
WATCHDOG
LPTE LPRSTB CMDAT0 CMDAT1 CMDAT2 CMDAT3 CMDAT4 CMDAT5 CMDAT6 CMDAT7 CMHREF CMVREF CMPDN CMMCLK CMPCLK
IN
PD
GPIO60
GPIO60
CMRST
IN
PD
GPIO61
GPIO61
EDIDAT
Default PU/PD PD PD PD PD PD PD PD PD PD PU PD PD PD PD PD LOW PD PD PD PD PD
Default mode GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 GPIO7 GPIO8 GPIO9 GPIO10 GPIO11 GPIO12 GPIO13 GPIO14 GPIO15 GPIO16 GPIO17 GPIO18 GPIO19 GPIO20 GPIO21 URXD1 UTXD1 GPIO24 GPIO25 GPIO26 GPIO27 GPIO28 GPIO29 GPIO30 GPIO31 GPIO32 GPIO33 GPIO34 GPIO35 GPIO36 GPIO37 GPIO38
Mode 7
WIFITOBT EINT1 EDI2CK
FMJTMS1 FMJTDI2 FMJTMS2 FMJTCK2
BTJTDI1 BTJTMS1 BTJTCK1
EINT2 EDI2WS EDI2DAT EINT3
FMJTCK1 FMJTDO2
JTCK1 BTJTRSTB1 BTJTDO1
BTDBGACKN1
KROW4 KROW3 KROW2 KROW1 KROW0 5931RST PU(5193) EDIWS(ATV) RST(5193) BT_PRI(5931) 5931 32.768KHz URXD1 UTXD1 MCINS MCCK MCDA0 MCCM0 NLD8(LCM) NLD7(LCM/5931) NLD6(LCM/5931) NLD5(LCM/5931) NLD4(LCM/5931) NLD3(LCM/5931) NLD2(LCM/5931) NLD1(LCM/5931) NLD0(LCM/5931) LWR_B(LCM/5931) LRD_B(LCM/5931)
GPIO64
BPIBUS1
OUT IN OUT OUT OUT IN OUT OUT IN
LOW PU
BPIBUS0 GPIO66 SFSWP SFCS0 SFCK SFIN SFOUT SFHOLD GPIO73 RESETB XP XM YP YM AGPO79 AGPI80 AGPI81 AGPI82
DAIPCMOUT
LPCE3B JTDI3 JTMS3 JTCK3 JTRTCK3 JTDO3 BTJTDI2 BTJTMS2 BTJTCK2
BTDBGACKN2
FMJTRST_B3 JTRST_B3
BTJTRSTB2 BTJTDO2 BTDBGIN2
DAISYNC DAIRST LPTE
CMCSK
LSA0DA0 LSCK0 LSDA0