Panasonic-松下 CONNECTOR SPECIFICATION FOR LCD (Panasonic 松下)
Panasonic FZ-X1 手持设备说明书
THE WORLD’S MOST RUGGED 5"HANDHELD MOBILE COMPUTER, WITHVOICE AND DATA TECHNOLOGYThe Panasonic FZ-X1 is the world’s most rugged 5" handheld mobilecomputer, with optional cellular 4G LTE data, and voice. This ultra-ruggedhandheld is MIL-STD-810G and IP65/68 certified with a 10' drop resistancespecification, operating temperature of -4°F to 140°F and a glove-touchenabled multi touch daylight-readable display. The FZ-X1 boasts theworld’s longest battery life for a handheld mobile computer, with 14 hoursof continuous data access. The battery quickly charges to 50% in just onehour, and is hot-swappable. There is an integrated 2D barcode reader andcustomized options of: Magstripe reader, or DEX connection or a gun grip.Option for ANSI 12.12.01 certified units for hazardous locations also. TOUGHPAD FZ-X1n A ndroid 5.1.1n Q ualcomm® quad-core processorn O ptional dual SIM multi-carrier 4G LTE datasupport with cellular voice capabilityn H igh volume 100db speaker with noise suppres-sion and echo cancellation microphonen M IL-STD-810G; 10' Drop; All-weather IP65 andIP67 dust and water-resistant designn14-hour Hot-swappable batteryn I ntegrated barcode readern I ntegrated options: Magstripe reader or DEXconnection or gun gripn O ptional ANSI certification 12.12.01 for hazardouslocationsn P atented rain sensing and glove touch enabledscreen technology with daylight readable displayn3 Year Warranty with business class support1.800.662.3537/toughpad/X1Android, Google, and Google Play are trademarks of Google Inc. Panasonic is constantly enhancing product specifications and accessories. Specifications subject to change without notice. Trademarks are property of their respective owners. ©2018 Panasonic Systems Corporation of North America. All rights reserved. Toughpad FZ-X1 Spec Sheet 01/18DURABILITYn MIL-STD-810G (shock, vibration, rain, dust, sand, altitude, freeze/thaw, high/low temperature, temperature shock, humidity)n IP65 and IP68 sealed all-weather design (submersible up to 5' for 30 minutes) n 10' drop-resistantn Operating temperature of -4°F to 140°F n Port coversn Raised bezel for LCD impact protection SOFTWARE nAndroid™ Lollipop (5.1.1)CPUn Qualcomm APQ8064T 1.7GHz Quad-core STORAGE & MEMORY n Memory 2GB nStorage 32GB – Up to 64GB additional with optional microSDXC card DISPLAYn 5" high definition 1280 x 720 daylight-viewable displayn 10-point capacitive gloved multi touch with glove touch mode– Rain sensing touch mode – 2-500 nit– IPS display with direct bonding– Anti-reflective and anti-glare screen treatments– Automatic screen rotationAUDIOn Integrated microphone x 3n Loud volume twin speakers 100 dbKEYBOARD & INPUTn 10-point gloved multi touch + digitizer screen n 2-4 buttons (user-definable) n On-screen QWERTY keyboardn 1D/2D barcode reader SENSORSn Ambient light sensor, digital compass, gyro and acceleration sensors CAMERAS n HD 1.3MP webcamn 8MP rear camera with LED light EXPANSION n microSDXC – Up to 64GB INTERFACE n Docking connector 13-pin n USB 2.0 (x 1)4-pinn Headphone & microphone Mini-jack stereoWIRELESSn IEEE802.11 a/b/g/n/acn 4G LTE, HSPA+, UMTS, EDGE, GPRS, CDMA 1x, EVDO Rev.A n Micro SIM card slot x 2 n Bluetooth v4.0 (class 1)n GPS 2m CEP50 (±2 to 4m)n Near Field Communication (NFC) – Felica Type A, Type BPOWER SUPPLY 5n L i-Ion battery pack 3.8V, 6200mAhn B attery operation:– Standby up to 1000 hours; Talk up to 23 hours; Barcode up to 20.5 hours n B ridge battery:– 30 seconds to 2 minutes n C ontinuous use data: – 14 hours n B attery charging time:– Power on approx. 3 hours; Power off approx. 3 hours; 50% charge in approx. 1 hour n A C adapter sold separately POWER MANAGEMENT n Consumption approx. 18W n H ot-swappable batterySECURITY FEATURESn FIPS140-2 level-1 compliantn ARM TrustZone (Built-in)WARRANTYn3-year limited warranty, parts and labor DIMENSIONS & WEIGHT6n 6.5"(L) x 3.4"(W) x 1.2"(H)nApprox. 0.94 lb.INTEGRATED OPTIONSn Optional Gun GripnOptional magnetic stripe reader with hand strap and stylus n Optional DEX Cable attachmentn Certified ANSI 12.12.01 for hazardous locations ACCESSORIES 7nAC Adapter (60W) for Device and Desktop Cradle CF-AA6373AM (sold separately from device, included with cradle)n AC Adapter (110W) for 4-Bay Cradle and 4-Bay CF-AA5713AM Battery Charger (included with both)n Desktop Cradle with Spare Battery Charging Slot FZ-BCRD111 (60W power adapter included)n 4-Bay I/O Cradle (110W power adapter included) FZ-VEBX121M n 4-Bay Battery ChargerFZ-VCBX111M (110W power adapter included)n Hand Strap with Stylus (corner rings included) FZ-BHDST112n Holster and Belt FZ-VSTX111U n Battery PackFZ-VZSUX100J n Shoulder Strap (corner rings included)TBCX1SSTP-P n Durastrap Kit (Includes waterproof, sanitizable TBCX1DURA-P shoulder strap and attachment hardware)n Toughmate Holster with Belt and Shoulder Strap TBCX1HSTR-P n Toughmate Hand Strap for FZ-X1 /E1 TBCX1HDSTP-P n Protective Film (10films/kit)FZ-VPFX11U n Gun Grip Accessory (Cleat and Gun Grip) FZ-VGGX111U n Gamber-Johnson Powered vehicle dock7160-0564-P n LIND DC/DC Car Charger 80W 12-32 Volt input CF-LNDDC80n LIND AC/DC/DC with USB Car/Air Charger 90W CF-LNDACDC90 12-16 Volt or AC inputn LIND DC/DC Mil-Spec Charger 90W 12-32 Volt input CF-LNDMLDC90n LIND DC/DC Isolated Forklift Charger CF-LNDDC80I20-60 VDC inputPlease consult your reseller or Panasonic representative before purchasing.1GB = 1,000,000,000 bytes. Total usable memory will be less depending upon actual system configuration. Operation has been tested and confirmed using Panasonic SD Memory Card with a capacity of up to 2GB, Panasonic SDHC Memory Card with a capacity of up to 32GB, and Panasonic SDXC Memory Card with a capacity of up to 64GB. Operation on other SD equipment is not guaranteed. Does not guarantee operation of all USB-compatible peripherals. Approximate time. Battery performance features such as charge time and life span can vary according to theconditions under which the computer and battery are used. Battery operation and recharge times will vary based on many factors, including screen brightness, applications, features, power management, battery conditioning and other customer preferences. 14 hours based on Panasonic test conditions. Talk time may change according to cellular network condition. Measured with VOIP application. Length measurements do not include protrusions. Weight varies with options. Accessories and Integrated Options may vary depending on your configuration. Visit Panasonic website for more accessories and details. The AC adapter is compatible with power sources up to 240V AC adapter. The AC adapter is sold separately.248_17_PSCM-SSd1.800.662.3537/toughpad/X1。
松下配线图
Cable end (Encoder side) S S-type cannon plug A Tyco Electronics, AMP connector
Cable type
E PVC cable with shield by Oki Electric Cable Co., 0.20mm2 x 8P, 3P
NC NC
• Pin configuration for motor/brake connector (without brake)
MSMA 1kW, 1.5kW, 2kW MSMA 3kW, 4kW, 5kW MDMA 7.5kW
MDMA 1kW, 1.5kW, 2kW MDMA 3kW, 4kW, 5kW MGMA 6kW
Cable
Part No. (Manufacturer's) 55100-0600 or 55100-0670 172161-1 170365-1
0.20mm2 x 3P
Manufacturer Molex Inc.
Tyco Electronics, AMP Oki Electric Cable Co.
PIN No. A B C D
Content U-phase V-phase W-phase Ground
Brake Cable
DA
CB
N/MS3102A 14S-2P (by Japan Aviation Electronics or equivalent)
PIN No. A B C D
Content Brake Brake
NC
Do not connect anything to NC pins.
MINAS A4/A4F/A4P Options
松下ECA1HM2R2数据表说明书
Aluminum Electrolytic Capacitors/ MDesign, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchaseand / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006Aluminum Electrolytic Capacitors/ MDesign, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006n Standard ProductsWhen requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5mm, 7.5mm,i=2.5mm.The taping dimensions are explained on p.196 of our Catalog. Please use it as a reference guide.Endurance : 85°C 2000h(m m )(m m )(m m )(pcs)(pcs)(µF)(m m )(m m )(mm)(m A )(V)tan δ(120Hz)(+20°C)6.31025i B i i Lead Space Part No.Specification Dia.LengthTapingCase size Cap.(±20%)Lead Dia.W.V.Straight Min. Packaging Q’tyTapingTaping (+85°C)Lead LengthStraight Leads2205112400.280.5 2.0 5.0 2.5ECA0JM221( )2002000470 6.311.23800.280.5 2.5 5.0 2.5ECA0JM471( )20020001000811.55800.280.6 3.5 5.0ECA0JM102( )2001000220010168900.300.6 5.0 5.0ECA0JM222( )2005003300102010200.320.6 5.0 5.0ECA0JM332( )200500470012.52011700.340.6 5.0 5.0ECA0JM472( )200500680012.52512700.380.6 5.0 5.0ECA0JM682( )20050010000162514500.460.87.57.5ECA0JM103( )100250150001631.517000.560.87.5ECA0JM153100220001835.519000.700.87.5ECA0JM22350330 6.311.23300.240.5 2.5 5.0 2.5ECA1AM331( )200200010001012.56300.240.6 5.0 5.0ECA1AM102( )200500220010209200.260.6 5.0 5.0ECA1AM222( )200500330012.52010900.280.6 5.0 5.0ECA1AM332( )200500470012.52512000.300.6 5.0 5.0ECA1AM472( )2005006800162514000.340.87.57.5ECA1AM682( )100250100001631.516000.420.87.5ECA1AM103100150001835.518500.520.87.5ECA1AM1535010511300.200.5 2.0 5.0 2.5ECA1CM100( )200200022511750.200.5 2.0 5.0 2.5ECA1CM220( )2002000335111100.200.5 2.0 5.0 2.5ECA1CM330( )2002000475111300.200.5 2.0 5.0 2.5ECA1CM470( )20020001005111800.200.5 2.0 5.0 2.5ECA1CM101( )20020002206.311.22800.200.5 2.5 5.0 2.5ECA1CM221( )200200016470811.54400.200.6 3.5 5.0ECA1CM471( )2001000100010166800.200.6 5.0 5.0ECA1CM102( )200500220012.52010000.220.6 5.0 5.0ECA1CM222( )200500330012.52512000.240.6 5.0 5.0ECA1CM332( )2005004700162513600.260.87.57.5ECA1CM472( )10025068001631.516000.300.87.5ECA1CM682100100001835.518000.380.87.5ECA1CM10350100 6.311.21800.160.5 2.5 5.0 2.5ECA1EM101( )2002000330811.53900.160.6 3.5 5.0ECA1EM331( )20010004701012.54800.160.6 5.0 5.0ECA1EM471( )200500100010208500.160.6 5.0 5.0ECA1EM102( )200500220012.52512000.180.6 5.0 5.0ECA1EM222( )2005003300162513000.200.87.57.5ECA1EM332( )10025047001631.515000.220.87.5ECA1EM47210068001835.517500.260.87.5ECA1EM68250475111300.140.5 2.0 5.0 2.5ECA1VM470( )2002000 35100 6.311.22100.140.5 2.5 5.0 2.5ECA1VM101( )2002000220811.53500.140.63.55.0ECA1VM221( )2001000Ripple current (120Hz)Aluminum Electrolytic Capacitors/ MDesign, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006n Standard ProductsWhen requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5mm, 7.5mm,i=2.5mm.The taping dimensions are explained on p.196 of our Catalog. Please use it as a reference guide.Endurance : 85°C 2000h3563(m m )(m m )(m m )(pcs)(pcs)(µF)(m m )(m m )(mm)(m A )(V)i Bi i Lead Space Part No.SpecificationDia.LengthTapingCase sizeCap.(±20%)Lead Dia.W.V.Straight Taping Taping Ripple current(120Hz)(+85°C)Lead LengthStraightLeads3301012.54400.140.6 5.0 5.0ECA1VM331( )20050047010165500.140.6 5.0 5.0ECA1VM471( )200500100012.5209000.140.6 5.0 5.0ECA1VM102( )2005002200162512500.160.87.57.5ECA1VM222( )10025033001631.514000.180.87.5ECA1VM33210047001835.516000.200.87.5ECA1VM472500.1511 1.30.120.5 2.0 5.0 2.5ECA1HM0R1( )20020000.22511 2.90.120.5 2.0 5.0 2.5ECA1HMR22( )20020000.33511 4.40.120.5 2.0 5.0 2.5ECA1HMR33( )20020000.4751150.120.5 2.0 5.0 2.5ECA1HMR47( )20020001511100.120.5 2.0 5.0 2.5ECA1HM010( )20020002.2511200.120.5 2.0 5.0 2.5ECA1HM2R2( )20020003.3511350.120.5 2.0 5.0 2.5ECA1HM3R3( )20020004.7511450.120.5 2.0 5.0 2.5ECA1HM4R7( )200200010511650.120.5 2.0 5.0 2.5ECA1HM100( )2002000 50225111000.120.5 2.0 5.0 2.5ECA1HM220( )2002000335111100.120.5 2.0 5.0 2.5ECA1HM330( )200200047 6.311.21300.120.5 2.5 5.0 2.5ECA1HM470( )2002000100811.52500.120.6 3.5 5.0ECA1HM101( )20010002201012.54000.120.6 5.0 5.0ECA1HM221( )20050033010165000.120.6 5.0 5.0ECA1HM331( )20050047010206500.120.6 5.0 5.0ECA1HM471( )200500100012.52510500.120.6 5.0 5.0ECA1HM102( )20050022001631.513000.140.87.5ECA1HM22210033001835.515000.160.87.5ECA1HM3325010511700.110.5 2.0 5.0 2.5ECA1JM100( )2002000225111050.110.5 2.0 5.0 2.5ECA1JM220( )200200033 6.311.21300.110.5 2.5 5.0 2.5ECA1JM330( )200200047 6.311.21600.110.5 2.5 5.0 2.5ECA1JM470( )2002000100811.52700.110.6 3.5 5.0ECA1JM101( )200100022010164500.110.6 5.0 5.0ECA1JM221( )20050033010205500.110.6 5.0 5.0ECA1JM331( )20050047012.5207500.110.6 5.0 5.0ECA1JM471( )2005001000162511000.110.87.57.5ECA1JM102( )10025022001835.514000.130.87.5ECA1JM222500.47511100.100.5 2.0 5.0 2.5ECA2AMR47( )20020001511200.100.5 2.0 5.0 2.5ECA2AM010( )20020002.2511300.100.5 2.0 5.0 2.5ECA2AM2R2( )2002000 100 3.3511400.100.5 2.0 5.0 2.5ECA2AM3R3( )20020004.7511500.100.5 2.0 5.0 2.5ECA2AM4R7( )200200010511700.100.5 2.0 5.0 2.5ECA2AM100( )2002000226.311.21150.100.52.55.02.5ECA2AM220( )2002000tan δ(120Hz)(+20°C)Min. Packaging Q’tyAluminum Electrolytic Capacitors/ MDesign, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006160250350n Standard ProductsWhen requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5mm, 7.5mm,i=2.5mm.The taping dimensions are explained on p.196 of our Catalog. Please use it as a reference guide.Endurance : 85°C 2000h(m m )(m m )(m m )(pcs)(pcs)(µF)(m m )(m m )(mm)(m A )(V)i Bi i Lead Space Part No.SpecificationDia.Length TapingCase sizeCap.(±20%)Lead Dia.W.V.Straight Min. Packaging Q ’tyTaping Taping Ripple current(120Hz)(+85°C)Lead LengthStraightLeads33811.51450.100.6 3.5 5.0ECA2AM330( )200100047811.51800.100.6 3.5 5.0ECA2AM470( )200100010010163500.100.6 5.0 5.0ECA2AM101( )200500 10022012.5205500.100.6 5.0 5.0ECA2AM221( )20050033012.5257000.100.6 5.0 5.0ECA2AM331( )20050047016259000.100.87.57.5ECA2AM471( )10025010001835.513000.100.87.5ECA2AM102501 6.311.2360.160.5 2.5 5.0 2.5ECA2CM010( )20020002.2 6.311.2530.160.5 2.5 5.0 2.5ECA2CM2R2( )20020003.3 6.311.2660.160.5 2.5 5.0 2.5ECA2CM3R3( )20020004.7 6.311.2780.160.5 2.5 5.0 2.5ECA2CM4R7( )2002000101012.51050.160.6 5.0 5.0ECA2CM100( )2005002210161750.160.6 5.0 5.0ECA2CM220( )2005003310202350.160.6 5.0 5.0ECA2CM330( )2005004712.5203200.160.6 5.0 5.0ECA2CM470( )20050010012.5255150.160.6 5.0 5.0ECA2CM101( )2005002201631.58300.160.87.5ECA2CM2211003301831.510900.160.87.5ECA2CM33150470184014400.160.87.5ECA2CM471501 6.311.2340.180.5 2.5 5.0 2.5ECA2DM010( )20020002.2 6.311.2500.180.5 2.5 5.0 2.5ECA2DM2R2( )20020003.3 6.311.2620.180.5 2.5 5.0 2.5ECA2DM3R3( )20020004.7811.5860.180.6 3.5 5.0ECA2DM4R7( )2001000101012.51000.180.6 5.0 5.0ECA2DM100( )200500 2002210201800.180.6 5.0 5.0ECA2DM220( )2005003310202200.180.6 5.0 5.0ECA2DM330( )2005004712.5203000.180.6 5.0 5.0ECA2DM470( )20050010016254750.180.87.57.5ECA2DM101( )1002502201831.58350.180.87.5ECA2DM22150330184011400.180.87.5ECA2DM331501 6.311.2340.180.5 2.5 5.0 2.5ECA2EM010( )20020002.2 6.311.2500.180.5 2.5 5.0 2.5ECA2EM2R2( )20020003.3811.5720.180.6 3.5 5.0ECA2EM3R3( )20010004.7811.5860.180.6 3.5 5.0ECA2EM4R7( )20010001010161100.180.6 5.0 5.0ECA2EM100( )2005002210201800.180.6 5.0 5.0ECA2EM220( )2005003312.5202500.180.6 5.0 5.0ECA2EM330( )2005004712.5253300.180.6 5.0 5.0ECA2EM470( )2005001001631.55300.180.87.5ECA2EM10110022018409300.180.87.5ECA2EM221501 6.311.2320.200.5 2.5 5.0 2.5ECA2VM010( )20020002.2811.5550.200.63.55.0ECA2VM2R2( )2001000tan δ(120Hz)(+20°C)Aluminum Electrolytic Capacitors/ MDesign, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006n Standard ProductsWhen requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5mm, 7.5mm,i=2.5mm The taping dimensions are explained on p.196 of our Catalog. Please use it as a reference guide.Endurance : 85°C 2000h(m m )(m m )(m m )(pcs)(pcs)(µF)(m m )(m m )(mm)(m A )(V)i Bi i Lead Space Part No.SpecificationDia.LengthTapingCase sizeCap.(±20%)Lead Dia.W.V.Straight Min. Packaging Q’tyTaping Taping Ripple current (120Hz)(+85°C)Lead LengthStraightLeads3.3811.5600.200.6 3.5 5.0ECA2VM3R3( )20010004.71012.5650.200.65.0 5.0ECA2VM4R7( )2005001010201150.200.6 5.0 5.0ECA2VM100( )200500 3502212.5201950.200.6 5.0 5.0ECA2VM220( )2005003316253000.200.87.57.5ECA2VM330( )1002504716253250.200.87.57.5ECA2VM470( )1002501001831.55350.200.87.5ECA2VM101501 6.311.2320.200.5 2.5 5.0 2.5ECA2GM010( )20020002.28.011.5500.200.6 3.5 5.0ECA2GM2R2( )20010003.31012.5540.200.6 5.0 5.0ECA2GM3R3( )2005004.71016720.200.6 5.0 5.0ECA2GM4R7( )200500 4001010201150.200.6 5.0 5.0ECA2GM100( )2005002212.5252150.200.6 5.0 5.0ECA2GM220( )2005003316252750.200.87.57.5ECA2GM330( )100250471631.53500.200.87.5ECA2GM47010010018406000.200.87.5ECA2GM101501811.5370.200.6 3.5 5.0ECA2WM010( )20010002.21012.5440.200.6 5.0 5.0ECA2WM2R2( )2005003.31016600.200.6 5.0 5.0ECA2WM3R3( )200500 450 4.71020790.200.6 5.0 5.0ECA2WM4R7( )2005001012.5201300.200.6 5.0 5.0ECA2WM100( )2005002216252100.200.87.57.5ECA2WM220( )100250331631.52850.200.87.5ECA2WM330100tan δ(120Hz)(+20°C)。
Panasonic 光电传感器产品说明书
ANLY PHOTO SENSORPHOTO SENSORTYPE SELECTION :I02PS0T30--001NProduct is subject to change without notice.SENSING MODE P=Photo type F=Optical fiber typeBODY SHAPE Q=sQuare type M=flat type (Mini)G=Groove type S=Screw type T=recTangular type F=Flat type H=screw type with HandleSENSING DISTANCE 10=10cm 300=3M 2000=20MMETHOD of DETECTION D=Diffuse reflective M=Mirror reflective T=Through-beam R=Red light (PG series)G=Green light (PG series)W=White light (PG series)SENSING DIRECTION None=Vertical H=HorizontalOUTPUT MODE N=NPN DC mode P=PNP DC mode A=2 wire AC mode R=Relay mode1=Normally open (PM series)2=Normally closed (PM series)FIBER LENGTH 50=50cm 100=1m 200=2mGENERAL DATA :Switching frequency: 80Hz Switching frequency: 80Hz Switching frequency: 60Hz Switching frequency: 60Hz Switching frequency: 30Hz Switching frequency: 30HzSwitching frequency: 100Hz Switching frequency: 100Hz Switching frequency: 80Hz Switching frequency: 80HzSwitching frequency: 30HzSensing distance: 10cmDC 10 ~ 30VSensing distance: 30cmDC 10 ~ 30VSwitching frequency: 1kHzAU-F02DC 10 ~ 30VSensing distance: 3mDC 10 ~ 30VSensing distance: 20mDC 10 ~ 30VPF-300M-R seriesSensing distance: 1mAC/DC 24 ~ 240VPF-2000T-R seriesSensing distance: 3mAC/DC 24 ~ 240VPT-15D seriesSensing distance: 20mAC/DC 24 ~ 240VPT-30D seriesSensing distance: 15cmDC 10 ~ 30VPT-200M seriesSensing distance: 30cmDC 10 ~ 30VPT-200T seriesSensing distance: 2mDC 10 ~ 30VSensing distance: 2mDC 10 ~ 30VSensing distance: 5cmConjunction with AU-F01/02Fiber (ӿ1.0)Fiber (ӿ2.2 x 2)Fiber (ӿ1.0 x 2)Fiber (ӿ2.2)Fiber (ӿ1.0)Fiber (ӿ2.2) Fiber (ӿ2.2 x 2)Fiber (ӿ1.0 x 2)Sensing distance: 4cmConjunction with AU-F01/02Sensing distance: 1.2cmConjunction with AU-F01/02FS-05T series FS-15T series FH-05T seriesSensing distance: 15cmConjunction with AU-F01/02 FH-15T seriesSensing distance: 5cmConjunction with AU-F01/02Sensing distance: 15cmConjunction with AU-F01/02FS-01D series FS-04D seriesSensing distance: 1.2cmConjunction with AU-F01/02FH-01D series Sensing distance: 4cmConjunction with AU-F01/02FH-04D seriesSwitching frequency: 30HzPF-200D-R seriesSensing distance: 2mAC/DC 24 ~ 240VSwitching frequency: 30HzPF-500M-R seriesSensing distance: 5mAC/DC 24 ~ 240VSwitching frequency: 30HzPF-700M-R seriesSensing distance: 7mAC/DC 24 ~ 240VSwitching frequency: 30HzPF-1000T-R seriesSensing distance: 10mAC/DC 24 ~ 240VSwitching frequency: 100Hz Switching frequency: 100HzPM-10D seriesSensing distance: 10cmDC 10 ~ 30VSensing distance: 40cmDC 10 ~ 30VPM-40D seriesAU-F01Switching frequency: 1kHzDC 12 ~ 24VPS, PT seriesCONNECTION :PF seriesDCBrown N.O.N.C.DCDC PMseriesDCPG, PQ series NPN typePG series PNP typeDCDCGreenBlackYellowAC/DC GreenBlackYellowGreenBlackYellowTargetPM-200M series PM-200T series Sensing distance: 2m Switching frequency: 80Hz Switching frequency: 80Hz Switching frequency: 60HzDC 10 ~ 30V Sensing distance: 2m DC 10 ~ 30V PG-06 seriesSensing distance: 6mm DC 10 ~ 30VNPN typePNP typeLight sourceDiffuse reflective typeThrough-beam typeMirror reflective typeDIMENSIONS : (mm) PS series。
Panasonic FX-301 快速连接器连接方法说明书
Thank you very much for purchasing Panasonic products. Please read this Instruction Manual carefully and thoroughly for the correct and optimum use of this product. Kindly keep this manual in a convenient place for quick reference.CONNECTION OF CONNECTOR TYPE FX-301(P)by holding the cable, as this can cause a cable-break.CAUTIONSThis product has been developed / produced for industrial use only.When the emission halt of the emitting power switching function is set from 'OFF' to 'ON', theoutput may be unstable. Do not use the output control for 0.5 sec. after starting emission.SPECIFICATIONS056 222 38 18*********************SEN TRONICAGNotes:1)2)The quick-connection sub cable does not have +V (brown) and 0V (blue).The power is supplied from the connector of the main cable.50mA max., if five, or more, the connector type FX-301(P) are connected in cascade.NPN output typeTerminal arrange-ment diagram ofthe connector typeFX-301PNP output typeTerminal arrange-ment diagram ofthe connector typeFX-301PPART DESCRIPTIONOPERATION PROCEDUREWhen the power supply is switched on, communicationdisplayed [MODE indicator / RUN (green)] lights up andthe digital display shows the incident light intensity.*1:*2:*3:*4:When Jog switch is pressed, the setting is confirmed.When MODE key is pressed for 2 sec., or more, the sensor returns to the 'RUN' mode.Cancellation is possible by pressing MODE key during setting.When Jog switch is turned in the 'RUN' mode, the current threshold value is displayed.And then, the current incident light intensity display appears again automatically.NAVI mode'.'.'.To PRO modePRO modeTEACHING MODEIn case of 2-level teachingThis is the method of setting the threshold value by teaching two levels, corresponding tothe object present and object absent conditions. Normally, setting is done by this method.PRO mode from approx. 0 to 80% (5% step). Refer to ''for the setting method.15This is the method of setting the threshold value by teaching only the objectabsent condition (stable incident light condition). This is used for detection in thepresence of a background body or for detection of small objects.In case of full-auto teachingFull-auto teaching is used when it is desired to set the threshold value without stopping the assembly line, with the object in the moving condition.PRO MODETHRESHOLD VALUE FINE ADJUSTMENT MODEWhen Jog switch is turned to the '-' side, the threshold value decreases (sensitivity increases).When Jog switch is pressed, the threshold value is confirmed.when MODE indicator / ADJ (yellow) lights up.When Jog switch is turned to the '+' side, the threshold value increases (sensitivity decreases).When Jog switch is pressed, the threshold value is confirmed.The output operation setting can be done when MODE indicator / L/D ON (yellow) lights up.turned to the '+' side or the '-' side.When Jog switch is pressed, the threshold value is confirmed.TIMER OPERATION SETTING MODEThe setting for whether the timer is used or not can be done when MODE indicator / TIMER (yellow) lights up.10ms OFF-delay (initial value) timer is automatically set ' for the setting method of the OFF-The timer interval set in the PRO mode is displayed.The factory setting is without timer ' '.Notes:1)2)Note:Set the threshold value at least a bit higher than the minimum threshold value. (The minimumthreshold value is where the value cannot be lowered any further even if the jog switch is turned to '-' side.)Notes: 1)2)If the sensor is returned to RUN state in the emitting haltcondition, ' ' is displayed. The ' ' goes off when the emitting power is turned on.Only in the response time H-SP mode, ON condition, the emitting power is 3 level.KEY LOCK FUNCTIONIf the jog switch and MODE key are pressed for more than 2 sec. at the same time in 'RUN' mode condition, the key operations are locked, and only the threshold value confirmation function or the adjust function (valid only when the adjust lock function is canceled) is valid.To cancel the lock function, press both the keys for more than 2 sec. once again .ERROR INDICATIONPRO5 mode setting3)In order to change PRO mode setting to 'RUN' mode, press MODE key for 2 sec. or more.after blinking twice. Notes:1)2)When any code other than the codes given in the Code setting table below is used, ' ' is displayed. The factory setting is ' '.When the code setting function is used, refer to the 'Code setting table' given below.The 0-ADJ setting function in this product was removed from production starting May, 2005.A DIFFERENCE BETWEEN THE MODIFIED VERSIONUNIT AND THE CONVENTIONAL VERSION UNITThe unit that 'NAVI' is printed only on a side is the modified version unit. The unit that 'NAVI' is printed on the both sides is the conventional version unit. Make sure to check this when both version units are used together.<Conventional version unit>'NAVI' is printed on the both sides.<Modified version unit>'NAVI' is printed only on a side.0#8+0#8+0#8+/id/pidsx/globalPRINTED IN JAPAN© Panasonic Industrial Devices SUNX Co., Ltd. 2012 Overseas Sales Division (Head Office)2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, JapanPhone: +81-568-33-7861 FAX: +81-568-33-8591About our sale network, please visit our website.” come with CE Marking.Contact for CE<Until June 30 ,2013>Panasonic Electric Works Europe AGRudolf-Diesel-Ring 2, D-83607 Holzkirchen, Germany<From July 1 ,2013>Panasonic Marketing Europe GmbH Panasonic Testing CenterWinsbergring 15, 22525 Hamburg,Germany。
松下DS系列继电器产品手册
18635.241.387.390DS1E15.5909.9.390DS2E20.787.390FEATURES• High sensitivity: 200 mW pick-up power100 mW pick-up power types available• Latching types available• High switching capacity: 60 W, 125 V A• High breakdown voltage: 1,500 V FCC surge between open contacts1,000 V AC between open contacts• DIP-1C type can be used with 14 pin IC socket2C type can be used with 16 pin IC socket,4C type can be used with 2 sets of 14 pin IC sockets • Gold-cap silver palladium types available for 2 Form C type • Bifurcated contacts are standardSPECIFICATIONSContact* Gold capped silver-palladium contact also available for 2 Form C 10 7 operations at 0.1 A 50 V DC resistiveCoil (polarized) (at 20 ° C 68 ° F )* For 1 Form C high sensitive types.Characteristics (at 20 ° C 68 ° F )Arrangement 1 Form C, 2 Form C, 4 Form C Initial contact resistance, max.(By voltage drop 6 V DC 1 A)50 m ΩContact material Gold-clad sliverRating(resistive)Max. switching power 60 W, 125 VA Max. switching voltage 220 V DC, 250 V ACMax. switching current 2 A DC, ACMax. carrying current 3 A DC, AC Expected life (min.operations)Mechanical (at 600 cpm)10 8(1 Form C 2 coil latching type: 10 7 )Electrical 2 A 30 VDC resistive5 × 10 5M type Single side stableMinimum operating power Approx. 200 mW Nominal operating powerApprox. 400 mW1 coil latchingMinimum set and reset power Approx. 90 mW Nominal set and reset power Approx. 180 mW 2 coillatching Minimum set and reset power Approx. 180 mW Nominal set and reset power Approx. 360 mWS type Single sidestableMinimum operating powerApprox. 100 mW (128 mW)* Nominal operating power Approx. 200 mW 1 coil latchingMinimum set and reset power Approx. 45 mW (58 mW)* Nominal set and reset power Approx. 90 mW2 coillatching Minimum set and reset power Approx. 90 mW (115 mW)* Nominal set and reset power Approx. 180 mWMax. operating speed20 cpm at rated load 50 cps at low level load Initial insuration resistance* 1Min. 100 M Ω (at 500 V DC)Initialbreak-down volt-age* 2Type of relay(DS1-S type)(Other types)Between open contacts 500 Vrms 1,000 VrmsBetween contacts sets—1,000 Vrms Between contacts and coil1,000 Vrms 1,500 Vrms FCC surge voltage between contacts and coil1,500 V (Expect DS1-S type)Operate time* 3 (at nominal voltage)Approx. 3 ms Release time (without diode)* 3(at nominal voltage)Approx. 2 ms Set time* 3 (at nominal voltage)Approx. 3 msReset time* 3 (at nominal voltage)Approx. 3 ms Temperature rise(at nominal voltage, Contact current: 2A) Max. 65 ° CShock resistanceFunctional* 4 1C, 2C:Min. 490 m/s 2 {50 G}4C:Min. 294 m/s 2 {30 G}Destructive* 5 Min. 980 m/s 2 {100 G}Vibration resistanceFunctional* 610 to 55 Hzat double amplitude of 3.3 mmDestructive10 to 55 Hzat double amplitude of 5 mmConditions for operation, transport and storage* 7(Not freezing and condens-ing at low temperature) Ambienttemp.–40 ° C to +70 ° C –40 ° F to +158 ° FHumidity 5 to 85% R.H.Unit weight 1 Form C Approx. 3.2g .11oz 2 Form C Approx. 4g .14oz 4 Form CApprox. 7g .25ozFCC (Federal Communication Commission) re-quests following standard as Breakdown Voltagespecification.Remarks*Specifications will vary with foreign standards certification ratings.* 1 Measurement at same location as "Initial breakdown voltage" section * 2 Detection current: 10 mA* 3 Excluding contact bounce time* 4 Half-wave pulse of sine wave: 11ms; detection time: 10 µ s * 5 Half-wave pulse of sine wave: 6ms * 6 Detection time: 10 µ s* 7 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61)mm inchDS187TYPICAL APPLICATIONS• T elecommunication equipment • Office equipment• Computer peripherals • Security equipment• Measuring instrumentationORDERING INFORMATIONTYPESSingle side stable1 coil latching2 coil latchingNotes:1. Reverse polarity types available (add suffix-R).2. Standard packing: carton: 50 pcs.; case: 500 pcs.Nominal Voltage, V DCPart No.1 Form C 2 Form C 4 Form C M (400 mW) type1.5DS1E-M-DC1.5V DS2E-M-DC1.5V DS4E-M-DC1.5V 3DS1E-M-DC3V DS2E-M-DC3V DS4E-M-DC3V 5DS1E-M-DC5V DS2E-M-DC5V DS4E-M-DC5V 6DS1E-M-DC6V DS2E-M-DC6V DS4E-M-DC6V 9DS1E-M-DC9V DS2E-M-DC9V DS4E-M-DC9V 12DS1E-M-DC12V DS2E-M-DC12V DS4E-M-DC12V 24DS1E-M-DC24V DS2E-M-DC24V DS4E-M-DC24V 48DS1E-M-DC48V DS2E-M-DC48V DS4E-M-DC48V S (200 mW) type1.5DS1E-S-DC1.5V DS2E-S-DC1.5V DS4E-S-DC1.5V 3DS1E-S-DC3V DS2E-S-DC3V DS4E-S-DC3V 5DS1E-S-DC5V DS2E-S-DC5V DS4E-S-DC5V 6DS1E-S-DC6V DS2E-S-DC6V DS4E-S-DC6V 9DS1E-S-DC9V DS2E-S-DC9V DS4E-S-DC9V 12DS1E-S-DC12V DS2E-S-DC12V DS4E-S-DC12V 24DS1E-S-DC24V DS2E-S-DC24V DS4E-S-DC24V 48DS1E-S-DC48VDS2E-S-DC48V DS4E-S-DC48VNominal Voltage, V DCPart No.1 Form C2 Form C4 Form CM (180 mW) type1.5DS1E-ML-DC1.5V DS2E-ML-DC1.5V DS4E-ML-DC1.5V 3DS1E-ML-DC3V DS2E-ML-DC3V DS4E-ML-DC3V 5DS1E-ML-DC5V DS2E-ML-DC5V DS4E-ML-DC5V 6DS1E-ML-DC6V DS2E-ML-DC6V DS4E-ML-DC6V 9DS1E-ML-DC9V DS2E-ML-DC9V DS4E-ML-DC9V 12DS1E-ML-DC12V DS2E-ML-DC12V DS4E-ML-DC12V 24DS1E-ML-DC24V DS2E-ML-DC24V DS4E-ML-DC24V 48DS1E-ML-DC48V DS2E-ML-DC48V DS4E-ML-DC48V S (90 mW) type1.5DS1E-SL-DC1.5V DS2E-SL-DC1.5V DS4E-SL-DC1.5V 3DS1E-SL-DC3V DS2E-SL-DC3V DS4E-SL-DC3V 5DS1E-SL-DC5V DS2E-SL-DC5V DS4E-SL-DC5V 6DS1E-SL-DC6V DS2E-SL-DC6V DS4E-SL-DC6V 9DS1E-SL-DC9V DS2E-SL-DC9V DS4E-SL-DC9V 12DS1E-SL-DC12V DS2E-SL-DC12V DS4E-SL-DC12V 24DS1E-SL-DC24V DS2E-SL-DC24V DS4E-SL-DC24V 48DS1E-SL-DC48VDS2E-SL-DC48V DS4E-SL-DC48VNominal Voltage, V DCPart No.1 Form C2 Form C4 Form CM (360 mW) type1.5DS1E-ML2-DC1.5V DS2E-ML2-DC1.5V DS4E-ML2-DC1.5V 3DS1E-ML2-DC3V DS2E-ML2-DC3V DS4E-ML2-DC3V 5DS1E-ML2-DC5V DS2E-ML2-DC5V DS4E-ML2-DC5V 6DS1E-ML2-DC6V DS2E-ML2-DC6V DS4E-ML2-DC6V 9DS1E-ML2-DC9V DS2E-ML2-DC9V DS4E-ML2-DC9V 12DS1E-ML2-DC12V DS2E-ML2-DC12V DS4E-ML2-DC12V 24DS1E-ML2-DC24V DS2E-ML2-DC24V DS4E-ML2-DC24V 48DS1E-ML2-DC48V DS2E-ML2-DC48V DS4E-ML2-DC48V S (180 mW) type1.5DS1E-SL2-DC1.5V DS2E-SL2-DC1.5V DS4E-SL2-DC1.5V 3DS1E-SL2-DC3V DS2E-SL2-DC3V DS4E-SL2-DC3V 5DS1E-SL2-DC5V DS2E-SL2-DC5V DS4E-SL2-DC5V 6DS1E-SL2-DC6V DS2E-SL2-DC6V DS4E-SL2-DC6V 9DS1E-SL2-DC9V DS2E-SL2-DC9V DS4E-SL2-DC9V 12DS1E-SL2-DC12V DS2E-SL2-DC12V DS4E-SL2-DC12V 24DS1E-SL2-DC24V DS2E-SL2-DC24V DS4E-SL2-DC24V 48DS1E-SL2-DC48VDS2E-SL2-DC48VDS4E-SL2-DC48VDS188COIL DATA (at 20 ° C 68 ° F )Single side stable1 coil latching2 coil latchingNominal voltage,V DCPick-up voltage, V DC (max.)Drop-out voltage, V DC(min.)Coil resistance, Ω ( ± 10%)Maximum allowable, V DC (at 50 ° C 122 ° F )1 Form C 2, 4 Form C1 Form C 2, 4 Form C Mtype1.5 1.05 1.050.15 5.63 1.82.253 2.1 2.10.322.53.64.55 3.5 3.50.562.567.56 4.2 4.20.6907.299 6.3 6.30.920310.813.5128.48.4 1.236014.4182416.816.8 2.4144028.8364833.633.6 4.8576057.672S type1.5 1.2 1.050.1511.32.433 2.4 2.10.345 4.865 4.03.50.51258.01064.8 4.20.61809.61297.2 6.30.940514.418129.68.4 1.272019.2242419.216.8 2.4288028.4484838.633.64.81152076.896Nominal voltage, V DCReset Set, V DC (max.)Coil resistance, Ω ( ± 10%)Maximum allowable, V DC (at 50 ° C 122 ° F )1 Form C 2, 4 Form C1 Form C 2, 4 Form C M type1.5 1.05 1.0512.5 1.8 2.253 2.1 2.1503.64.55 3.5 3.513967.56 4.2 4.22007.299 6.3 6.345010.813.5128.48.480014.4182416.816.8320028.8364833.633.61280057.672S type1.5 1.2 1.05252.433 2.4 2.1100 4.865 4.03.52788.01064.8 4.24009.61297.2 6.390014.418129.68.4160019.2242419.216.8640038.4484838.433.62560076.896Nominal voltage, V DCReset Set, V DC (max.)Coil resistance, Ω ( ± 10%)Maximum allowable, V DC (at 50 ° C 122 °F )1 Form C 2,4 Form CCoil lCoil ll1 Form C 2,4 Form C M type1.5 1.05 1.05 6.25 1.82.253 2.1 2.1253.64.55 3.5 3.569.467.56 4.2 4.21007.299 6.3 6.322510.813.5128.48.440014.4182416.816.8160028.8364833.633.6640057.672S type1.5 1.2 1.0512.5 2.433 2.4 2.150 4.865 4.03.51398.01064.8 4.22009.61297.2 6.345014.418129.68.480019.2242419.216.8320038.4484838.433.61280076.896DS189DIMENSIONSmm inch1 Form CSingle side stable, 1 coil latching, 2 coil latchingGeneral tolerance: ± 0.3 ± .012PC board pattern (Copper-side view)Single side stable, 1 coil latching 2 coil latchingT olerance: ± 0.1 ±.004Schematic (Bottom view)Single side stableDeenergized condition1 coil latchingDiagram shows the "reset" position when terminals 1 and 6 are energized.Energize with reverse polarity to transfer contacts. 2 coil latchingDiagram shows the "reset" position when terminals 3 and 6 are energized.Energize terminals 1 and 3 to transfer contacts.2 Form CSingle side stable, 1 coil latching, 2 coil latchingGeneral tolerance: ± 0.3 ± .012PC board pattern (Copper-side view)Single side stable, 1 coil latching 2 coil latchingT olerance: ±0.1 ± .004Schematic (Bottom view)Single side stableDeenergized condition1 coil latchingDiagram shows the "reset" position when terminals 1 and 16 are energized.Energize with reverse polarity to transfer contacts. 2 coil latchingDiagram shows the "reset" position when terminals 2 and 15 are energized.Energize terminals 1 and 16 to transfer contacts.DS1904 Form CSingle side stable, 1 coil latching, 2 coil latchingGeneral tolerance: ± 0.3 ± .012PC board pattern (Copper-side view)Single side stable, 1 coil latching2 coil latchingTolerance: ± 0.1 ±.004Schematic (Bottom view)Single side stableDeenergized condition1 coil latchingDiagram shows the "reset" position when terminals 1and 16 are energized.Energize with reverse polarity to transfer contacts. 2 coil latchingDiagram shows the "reset" position when terminals 2 and 15 are energized.Energize terminals 1 and 16 to transfer contacts.REFERENCE DATA1. Maximum switching capacity2. Life curve (Resistive load)3. Contact reliability for AC loadsSample: DS2E-M-DC24V 10 pcs.Cycle rate: 20 cpm.Detection level: 200 m Ωmm inchDS4-(1). Coil termperature rise(2 Form C single side stable type)Point measured: Inside the coilAmbient temperature: 18° to 19°C 64° to 66°F4-(2). Coil tempeature rise(4 Form C single side stable type)Point measured: Inside the coilAmbient temperature: 17° to 18°C 63° to 64°F4-(3). Coil temperature rise(2 Form C 2 coil latching type)Point measured: Inside the coilAmbient temperature: 20° to 21°C 68° to 70°FFor Cautions for Use, see Relay Technical Information。
松下 空调产品说明文件说明书
PACi HIGH STATIC PRESSURE HIDE AWAY·High ESP (external static pressure) up to 150Pa · A utomatic learning function for the required static pressure on site during commissioning*·DC FAN for better efficiency and control ·Built in drain pump ·Twin split options · E asy connection and control of external fan or ERV using the connector PAW-FDC on the indoor unit PCB. The external device can be controlled by the remote control of the indoor unit ·New Comfort Cloud control* A standard wired remote controller is required.Refrigerant gas R32 that shows a drastic reduction in the value of Global Warming Potential (GWP). — Exceptional Seasonal cooling efficiency based on the ErP regulation. — Exceptional Seasonal heating efficiency based on the ErP regulation. — Inverter Plus System classification highlights the highest performing Panasonic systems. — The air conditioner works in cooling mode with an outdoor temperature of -15°C. — The air conditioner works in heating mode even when outdoor temperatures are as low as -20°C. — DC Fan. Safe and precise.Filter Included — R410A/R22 renewal. — Internet Control. A next generation system providing a user-friendly remote controller of air conditioning or heat pump units from everywhere, using a simple Android or iOS smartphone, tablet or PC via internet. — Datanavi, a new way to connect. Simple and easy support tool with your smartphone. — BMS connectivity. The communication port can be integrated into the indoor unit and provides easy connection to, and control of, your Panasonic heat pump to your home or building management system.6,50 SEER/4,60 SCOPA++COOLING MODEOPTIONAL WLANFILTER INCLUDEDR32R22/R410A RENEWAL R22R410AR32HEATING MODEDC FANDATANAVIBMS CONNECTIVITYR32NEW REFRIGERANT GASPlenumsAir Outlet Plenum (without regulation adaptor)Diameters Model36, 45 & 50 2 xØ200CZ-56DAF260 & 71 3 xØ200CZ-90DAF2 100, 125 & 140 4 xØ200CZ-160DAF2Air Inlet PlenumDiameters Model60 & 71 3 xØ200CZ-DUMPA90MF2 100, 125 & 140 4 xØ200CZ-DUMPA160MF2The ducted system is the ideal solution for flexible concealed air conditioning. Optional 200mmspigots ensure simple and hassle-free connection to spiral ductwork. Using a high-lift drainpump, drain piping can be elevated up to 785mm from the base of the unit.environmentally friendly. Compared to R22 and R410A, R32 has a very lowpotential impact on global warming. Panasonic is leading the switch to R32.The static pressure outside the unit can be increased up to 150 PaType3645506071100125140Standard Pa7070707070100100100Maximum available setting Pa150150150150150150150150Built-in Drain pump(DC motor pump)- Built-in filter- Side removablefilterStandardized height of 290mm for all models.Height standardization enables easy and uniforminstallation for models with different capacities.equipment box makesmaintenance easy. P-Link PCBAccessoriesCZ-RTC5B Wired remote controller with Econavi function anddatanaviCZ-RWS3+CZ-RWRC3Infrared remote controllerCZ-RE2C2Simplified remote controllerPAW-WTRAY Tray for condenser water compatible with baseground supportPAW-GRDBSE20Outdoor base ground support for noise and vibration absorptionPAW-GRDSTD40Outdoor elevation platform 400 x 900 x 400mmCZ-56DAF2Air Outlet Plenum S . .PF1E5B 36, 45 & 50CZ-90DAF2Air Outlet Plenum S . .PF1E5B 60 & 71CZ-160DAF2Air Outlet Plenum S . .PF1E5B 100, 125 & 140CZ-DUMPA90MF2Air Inlet Plenum S . .PF1E5B 60 & 71CZ-DUMPA160MF2Air Inlet Plenum S . .PF1E5B 100, 125 & 140CZ-CAPWFC1NEW Commercial WLAN Adaptor1) For models below 12kW, the SEER and SCOP is calculated based on values of EU/626/2011. For models above 12kW, the SEER and SCOP is calculated based on values of EU/2281/2016. 2) Medium External static pressure setting from factory. 3) The sound pressure of the units shows the value measured of the position 1,5 below the unit. The sound pressure is measuredin accordance with Eurovent 6/C/006-97 specification. 4) Outdoor unit operation range : PZH : Cooling -15 ~ +46°C, Heating -20 ~ +24°C, PZ : Cooling -10 ~ +43°C, Heating -15 ~ +24°C. 5) When installing the outdoor unit at a higher position than the indoor unit. * Recommended fuse for the indoor 3A.Just holding up your smartphone to the LED display on a remote controller(CZ-RTC5B) to receive useful AC system information super fast by PanasonicLight ID Technology.· S can & Save AC system info· E asy access to manual database· Commissioning, F gas check data historyCZ-RE2C2Optional Controller.Simplified remote controller.CZ-CENSC1Optional EconaviSensor.CZ-RTC5BWired remote controllerCompatible with EconaviCZ-RWS3 + CZ-RWRC3Optional Controller.Infrared remote controller.New Commercial WLAN AdaptorNew CZ-CAPWFC1 interfaceadaptor, allows connection of oneor a group of indoor units to bemanaged by the Panasonic ComfortCloud App, which provides control,monitoring, scheduling and erroralerts.Panasonic Cloud ServerPanasonic unique LightID technologyDuetotheongoinginnovationofourproducts,thespecificationsofthiscataloguearevalidbarringtypographicerrors,andmaybesubjecttominormodificationsbythemanufacturerwithoutpriorwarninginordertoimprovetheproduct.ThetotalorpartialreproductionofthiscatalogueisprohibitedwithouttheexpressauthorisationofPanasonicMarketingEuropeGmbH.To find out how Panasonic cares for you, log on to www.aircon.panasonic.eu/IE_en/+353 (0)1 4195313+353 (0) 876005031Heating & Cooling SolutionsPanasonic Ireland. A branch of Panasonic Marketing Europe GmbH Unit 1, The Courtyard, Kilcarbery Business ParkNangor Road, Dublin 22。
Panasonic产品安装使用说明书
安装使用说明书型号：感谢您选用Panasonic 产品。
安装、使用和维护Panasonic 产品前，请仔细阅读本说明书。
特别是「安装注意事项」(3～4页19～20页)请务必在使用前或施工前仔细阅读。
不遵照此说明书进行操作有可能导致人员受伤或财产损失。
安装完成后，请向顾客说明如何使用和维护Panasonic 产品，并将此说明书交给顾客保管。
请妥善保管好此说明书以备日后参考。
(保留备用)购机时请认真填写保修证，并经商店填写盖章后妥善保管好本保修证以作保修用。
执行标准：GB/T 21087全热交换器标准型PM2.5净化型FY-15ZU1C FY-25ZU1C FY-35ZU1C FY-50ZU1C FY-15ZDP1C FY-25ZDP1C FY-35ZDP1C FY-50ZDP1C※表示液晶控制器 的LCD 全部显示 状态24是结合了「24小时换气」和「热交换」的节能、舒适的换气设备。
交换小时换气热缓慢的置换室内的空气，使室内一直处于新鲜空气的状态。
排出室内的污浊空气和导入室外的新鲜空气之间通过热交换芯，在相互隔离的状态下，可以进行温湿度能量的交换。
全热交换器是什么2为了避免对您或其他人造成伤害或财物损害，请仔细阅读并遵守本说明书中的安全注意事项。
■以下标志是根据错误使用所产生的危险或受伤程度进行分类。
■以下标志为务必遵守的指示种类。
345以下尺寸为除隔热材料厚度之外的全热交换器上的尺寸。
回风过滤网热交换芯电机风口框架名称8NO.6123457PPABS 材质数量142111备注风轮吊装部件初效过滤网19电源箱14镀锌钢板特殊纸+树脂无纺布镀锌钢板镀锌钢板名称NO.材质数量备注6■FY-25ZU1C■FY-35ZU1C适用管道直径Φ150■FY-50ZU1C7②设置检修口(图2)(1)双点划线内部为检修保留区不 应设置其他装置。
(2)逆向安装时，检修口的位置也 要满足右记尺寸关系。
且由于无法进行下检修，可不设置过滤器检修口。
Panasonic LS-401P数字激光传感器说明书
※Photo may vary from actual product.Product Number LS-401PPart Number LS-401PProduct Digital Laser SensorDetails Amplifier (Connector type)Product name Digital Laser Sensor LS-400LS-401P | Digital Laser Sensor LS-400Spec DetailAs of April 11, 2023Specifications and design of the products are subject to change without notice for the product improvement.Item SpecificationsProduct Number LS-401PPart Number LS-401POperation indicator Orange LED (lights up when output 1 and output 2 are ON)Laser emission indicator Green LED (lights up during laser emission)Ambient temperature -10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted close together:-10 to +50 ℃ +14 to +122 ℉ , if 8 to 16 units are mounted close together:-10 to +45 ℃ +14 to +113 ℉ )(No dew condensation or icing allowed),Storage: -20 to +70 ℃ -4 to +158 ℉Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RHVoltage withstandability 1,000 V AC for one min.between all supply terminals connected together and enclosureInsulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminalsconnected together and enclosureVibration resistance 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Zdirections for two hours eachShock resistance 98 m/s 2 acceleration (10 G approx.) in X, Y and Z directions five timeseachMaterial Enclosure: Heat-resistant ABSTransparent cover: PolycarbonatePush button switch: AcrylicJog switch: ABSCable -(Note) The cable is not supplied as an accessory. Be sure to use theoptional quick-connection cables given below.Main cable (4-core): CN-74-C1 (cable length 1 m 3.281 ft ), CN-74-C2(cable length 2 m 6.562 ft ), CN-74-C5 (cable length 5 m 16.404 ft )Sub cable (2-core): CN-72-C1 (cable length 1 m 3.281 ft ), CN-72-C2(cable length 2 m 6.562 ft ), CN-72-C5 (cable length 5 m 16.404 ft )Weight Net weight: 15 g approxGross weight: 20 g approxSupply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or lessCurrent consumption Normal operation: 950 mW or less (Current consumption 40 mA or less at24 V supply voltage)ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 Vsupply voltage)Outputs(Output 1, Output 2)PNP open-collector transistor- Maximum source current: 100 mA (Note)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less [at 100 mA (Note) source current]Product Number Part Number Product Details Product name Product Number Part Number Product Details Product name ProductNumber Part Number Product Details Productname Product Number Part Number Product Details ProductnameProduct Number Part Number Product Details Productname ProductNumber Part Number Product Details Productname (Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade, and 25 mA if 9 to 16 connector type amplifiers are connected in cascade.Outputs(Output 1, Output 2):Outputoperation Selectable either Light-ON or Dark-ON, with jog switchOutputs(Output 1, Output 2):Short-circuit protection IncorporatedResponse time 80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less(STD), 4 ms or less (U-LG) selectable with jog switchExternal input(Laser emission haltFull-auto teaching / Limit teaching)-Select indicator Yellow LED(lights up when either output 1 or output 2 is selected)MODE indicator RUN: Green LEDTEACH, L/D, TIMER, CUST, PRO: Yellow LEDDigital display 4 digit (green) + 4 digit (red) LED displaySensitivity setting Normal mode: 2-level teaching / Limit teaching / Full-auto teaching /Manual adjustmentWindow comparator mode: Teaching (1-level, 2-level, 3-level) / ManualadjustmentHysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentDifferential mode: 5-level settingsFine sensitivity adjustment function IncorporatedTimer function Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer,switchable either effective or ineffective.Timer function:Time 1 to 9,999 msAutomatic Interference prevention function Incorporated[Up to four sets of sensor heads can be mounted close together.(However, disabled when in H-SP mode)]Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm 2, or more,cable.AccessoriesProductNumberCN-EP1 Part Number CN-EP1Product Connector for amplifierProduct name ConnectorProductNumberFX-CHPart Number FX-CHProductBank SelectionUnitDetails NPN inputProductnameBank SelectionUnit FX-CHProductNumberFX-CH-PPart Number FX-CH-PProductBank SelectionUnitDetails PNP inputProductnameBank SelectionUnit FX-CHProduct Number Part NumberProductProduct name ProductNumberPart NumberProductProductnameProductNumberPart NumberProductProductname© Panasonic Industry Co., Ltd.。
松下-BCS2 BCR2 BCD2系列数字显示控制器-规格单说明书
and EIT options are ordered together,transmission output terminals will be used for EV2output terminals.Therefore,Transmission output will be disabled.(*5)For BCS2,2points of Event input are not available.(*6)For Direct current output type,C5W,EIW or W option cannot be ordered.The CT is sold separately.(*7)For BCS2,1point of Event input is available.RatingRated Scale Input (TC)Scale RangeResolution Input (RTD)Scale RangeResolutionK -200to 13701)Pt100-200.0to 850.00.1)-200.0to 400.00.1)-200to 8501)J -200to 10001)JPt100-200.0to 500.00.1)R 0to 17601)-200to 5001)S 0to 17601)Input (DC)Scale RangeResolutionB 0to 18201)4to 20mA-2000to 10000(*1)1E -200to 8001)0to 20mA T -200.0to 400.00.1)0to 1VN -200to 13001)0to 5VPL-32to 2534(32to 4199(,C (W/Re5-26)External resistance,100or less)RTDPt100,JPt100,3-wire typeAllowable input lead wire resistance:10or lessAllowable input current:50mA or less DC voltage (V DC)0to 1V DCInput impedance:1Mor less0to 5V ,1to 5V ,0to 10V DC Input impedance:100kor less(for a single unit mounting)ThermocoupleWithin1digit,However,R,S inputs,0to 200):Within(12(32to 572(321digitRTDWithin 1digitDirect current Within 1digitDC voltageWithin1digitEffect of ambient temperatureWithin 50ppm/1.0%of the setting time(20Proportional band (Factory default:0.0)For direct current,DC voltage input,it is possible to set up to ‘2-digits after decimal point’.Ifthe proportional band exceeds 100.0%,the setting range will be()Direct current,DC voltage inputs:1to 10000(The placement of the decimal point follows the selection)OUT1high limit,OUT1low limit0to 100%(Direct current output:-5to 105%)(Factory default:OUT1low limit:0%,OUT1high limit:100%)Control outputRelay contact:1aControl capacity:3A 250V AC (resistive load)1A 250V AC (inductive load cos)EC (EMC directive)EMI:EN61326Electric-field strength of radiated disturbance:EN55001Group 1Class A Terminal noise voltage:EN55011Group 1Class A EMS:EN61326ULUL60730File No.E159038Indication StructureBCS2BCR2BCD2Display(1)PV Display Indicates the PV (process variable)or setting characters in setting mode.(2)SV DisplayIndicates the SV (desired value)or set data in setting mode.In Monitor mode,indicates MV (manipulated variable),remaining step time (Program control),step number (Program control)(*),or Set value memory number (Fixed value control)(*).(*):For BCS2only(3)MEMO/STEP DisplayIndicates Set value memory number or Step number (Program control).(BCR2,BCD2)Action Indicator (4)O1Lights up when control output OUT1is ON.For direct current output type,flashes corresponding to the MV in 125ms cycles.O2Lights up when control output OUT2(EV2,DS,DA,EV2+Doptions)is ON.Turns off when 019is selected in [Event output EV2allocation].AT Flashes while AT ,‘AT on startup’or Auto-reset is performing.R/L Lights up while in Remote action (EIT option).T/R Lights up during Serial communication (C5W option)TX (transmitting)output.MEMO Lights up when Set value memory number is indicated.(BCR2,BCD2)STEP Lights up when Step number (Program control)is indicated.(BCR2,BCD2)Keys,Connector (5)UP key Increases the numeric value.If this key is pressed for 1second during program operation,the unit proceeds to the next step (Advance function).(6)DOWN key Decreases the numeric value.(7)MODE key Selects the setting mode,and registers the set data.In RUN mode,if this key is pressed for 3seconds,the unit moves to Monitor mode.(8)OUT/OFF key OUT/OFF function:Turns the control output ON or OFF .Auto/Manual control:Switches the Auto/Manual control.Program control:Starts or stops the Program control.(9)Console connectorTool cable connector is at the top of the instrument (BCS2,BCR2,BCD2).By connecting the tool cable (CMD-001,sold separately),the following operations can be conducted from an external computer using the Console software SWC-BCx01M.•Reading and setting of SV,PID and various set values •Reading of PV and action status •Function change (9)(4)(5)(6)(1)(2)(8)(7)(1)(2)(4)(5)(6)(8)(7)(3)(1)(3)(4)(5)(6)(2)(8)(7)options)O2Control output OUT2(EV2,DS,DA,EV2+Doption)For BCR2,BCD2,if EV2+DStandard FunctionsEV1OutputOutput Relay contact:1a Control capacity:3A250V AC(resistive load)1A250V AC(inductive load cos()Direct current,DC voltage inputs:1to10000(The placement of the decimal point follows the selection) Output EV1or EV2output for which Alarm output(000to012)is selected in[Event output EV1/EV2allocation].Alarm value0 Enabled/Disabled If‘Enabled’is selected in[Alarm value0Enabled/Disabled],the following alarm type activates even if alarm value is set to0(zero):High limit alarm,Low limit alarm,High/Low limits alarm,High/Low limits independent alarm,High/Low limit range alarm,High/Low limit range independent alarm,High limit with standby alarm,Low limit with standby alarm,High/Low limits with standby alarm,High/Low limits with standby independent alarm.Loop Break AlarmSetting range Loop break alarm time:0to200minutesLoop break alarm span:TC,RTD inputs:0to150),0.0to150.0)Direct current,DC voltage inputs:0to1500(The placement of the decimal point follows the selection) Output EV1or EV2output for which Loop break alarm(014)is selected in[Event output EV1/EV2allocation].Simplified Converter FunctionFor Direct current output type,the BCx2can be used as a simplified converter.Converts each input value to‘4to20mA DC’,and outputs it).5%of rated currentAction point Set valueAction ON/OFF actionOutput EV1or EV2output for which Heater burnout alarm(013)is selected in[Event output EV1/EV2allocation].Heating/Cooling Control Output(Option code:DS,DA,EV2)OUT2proportional band Thermocouple,RTD input without decimal point:0to Input span[Factory default:10)]Thermocouple,RTD input with decimal point:0.0to Input spanDC voltage,current inputs:0.0to1000.0%Integral time(I)Same as that of OUT1Derivative time(D)Same as that of OUT1OUT2proportional cycle 0.5sec,or1to120sec[Factory default:DS option:3sec,EV2option(When019is selected in[Event output EV2 allocation]):30sec,Direct current(DA option):Not available]Overlap/Dead band setting range Thermocouple,RTD inputs:-200.0to200.0),Direct current,DC voltage inputs:-2000to2000(The placement of the decimal point follows the selection)OUT2ON/OFFhysteresisThermocouple,RTD inputs:0.1to1000.0)(Factory default:1.0=0.4)Electrical life:100,000cyclesNon-contact voltage(for SSR drive):DS option12V DCSerial Communication(Option code:C5W,C5)Communication line EIA RS-485Communication method Half-duplex communicationSynchronization method Start-stop synchronizationCommunication speed9600,19200,38400bps Selectable by keypad(Factory default:9600bps)Data bit/Parity Data bit:7,8Parity:Even,Odd,No parity(Selectable by keypad)(Factory default:7bits/Even) Stop bit1,2(Selectable by keypad)(Factory default:1)Response delay time0to1000ms(Factory default:10ms)Response from the controller can be delayed after receiving command from the host computer.Data format Communicationprotocol Shinko protocol Modbus ASCII Modbus RTUStart bit111Data bit77or88Parity Yes(Even)Yes(Even,Odd)No parity Yes(Even,Odd)No parityStop bit11or21or2External Setting Input(Option code:EIT)Setting signal4to20mA DCAllowable input50mA DC or lessInput impedance50)Output accuracy Within3V DC(when load current is30mA DC)Ripple voltage Within200mV DC(when load current is30mA DC)Max.load current30mA DCBCR2,BCD2When the C5W or C5option is ordered When the EIW or W option is ordered When the EIT or EI option is orderedInsulation resistance10M)Time accuracy WithinError CodeError Code Error Contents Occurance Status(*1)Non-volatile IC memory(EEPROM)is defective.When power is turned ON(*1)Data writing error when power failure occurs When power is turned ON(*2)When input value exceeds input range high limit value(Scaling high limit value for DCinput)During usual operation(*2)When input value drops below input range low limit value(Scaling low limit value for DCinput)During usual operation(*2)Input burnout,or input value is outside the control range or indication range.During usual operationHardware malfunction,or in error status.Errors cannot be solved.During usual operation(*1)Indicated after4hours have passed since AT or‘AT on startup’is performed.For‘AT on startup’,delay time and slope cannot be measured correctly.After AT or‘AT on startup’isperformed(*1)Errors can be cancelled with the MODE key.(*2)Error codes are displayed when‘Enabled’is selected in[Error indication Enabled/Disabled].(Non-condensing,No icing)Ambient humidity35to85%RH(Non-condensing)Weight BCS2:Approx.110gBCR2:Approx.160gBCD2:Approx.220gAccessories included Mounting frame1piece(BCS2),Screw type mounting bracket1set(BCR2,BCD2), Instruction manual(excerpt)1copyAccessories sold separately Terminal cover,CT(CTL-6-S-H)for Heater burnout alarm20A,CT(CTL-12-S36-10L1U)for Heater burnout alarm100A,T ool cable CMD-001EnvironmentalspecificationRoHS directive compliantInstruction manual Please download the full Instruction Manual and Communication Instruction Manual from Shinko website: http://www.shinko-technos.co.jp/e/SHINKO TECHNOS CO.,LTD.2-5-1,Senbahigashi,Minoo,Osaka,562-0035,Japan TEL:+81-72-727-6100FAX:+81-72-727-70067545＋0.5045＋0.5045＋0.5n ×48-3＋0.5Horizontal close mounting n:Number of units mountedHorizontal close mounting n:Number of units mountedHorizontal close mounting n:Number of units mountedT erminal cover (soldseparately)CUS-100:microUSB type B –USB Type A Full length 2m (Commercially available USB cable can be used.)。
松下 RZ-S500W RZ-S300W 数码无线立体声入耳式耳机 使用说明书
Basic Operating Instructions使用说明书基本使用說明書Digital Wireless Stereo Earphones数码无线立体声入耳式耳机數碼無線立體聲入耳式耳機RZ-S500WRZ-S300WModel No. / 型号 /型號Panasonic Corporation© Panasonic Corporation 2020CnCoGEPNQW5821ZAF0420SR0until2020/4/30Thank you for purchasing this product.Please read these instructions carefully before using this product, and save this manual for future use.感谢您购买本产品。
请于使用前仔细阅读操作使用说明书，并将说明书妥善保管，以备将来使用。
感謝您購買本產品。
使用本產品前請仔細閱讀這些說明，並保留本說明書供日後使用。
制造商:松下电器产业株式会社日本大阪府门真市大字门真1006番地进口商:松下家电(中国)有限公司杭州经济技术开发区松乔街2号原产地:马来西亚2020年4月 发行在马来西亚印刷EnglishMore detailed operating instructions are available in“Operating Instructions (PDF format)”.To read it, download it from the website. (l below)•Click the desired language.中文（简体）更加详细的操作说明请参阅“使用说明书（PDF 格式）”。
如需阅读，请从网站上下载。
(l 以下)•单击所需的语言。
中文（繁體）在“使用說明書（PDF 格式）”中可找到更詳細的操作說明。
若要閱讀操作說明，請從以下網站進行下載。
松下MADC1505说明书 英文版综合版本
Driver ............................................................................................................................................................ 23 Motor ............................................................................................................................................................. 24
AC Servo Motor Driver
MINAS AIII-series
Operating Manual
DV0P3450
[Be sure to give this instruction manual to the user.] • Thank you very much for your buying Panasonic AC Servo Motor Driver, MINAS
Parts Description ..................................................................... 20
Driver ............................................................................................................................................................ 20 Motor ............................................................................................................................................................. 22
Panasonic基础所有者数字无线立体声耳机模型号RP-BTS30用户手册说明书
Model No.RP-BTS30If you have any questions, visit:In the U.S.A.: /support In Canada: www.panasonic.ca/english/support Pour toute question, visitez :www.panasonic.ca/french/support© Panasonic Corporation 2015-2016 Printed in ChinaPanasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario L4W Two Riverfront Plaza, Newark, NJ 07102-5490 SQT1248-2M1215KZ2046EnDear customerThank you for purchasing this product.Please read these instructions carefully before using this product, and save thismanual for future use.More detailed operating instructions are available in “Owner’s Manual (PDF format)”.To read it, download it from the website.http://panasonic.jp/support/global/cs/accessories/oi/rp_bts30/ •Click the desired language.●The Bluetooth ®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license.Other trademarks and trade names are those of their respective owners.●Other system names and product names appearing in this document are in general the registered trademarks or trademarks of the respective developer companies. Note that the ™ mark and ® mark do not appear in this document.AccessoriesPlease check and identify the supplied accessories.Only for U.S.A.:To order accessories, refer to “Limited Warranty”.Only for Canada:To order accessories, contact the dealer from whom you have made your purchase. 1 USB charging cord1 Carrying pouch1 Earpieces set (L, S)•M-size earpieces are attached at the time of purchase.About water resistanceIPX4 equivalentProtected against splashing water.(Securely close the USB lid.)Part namesChargingWireless pairingLED indicator light•“sleep mode”, charging may not take place.successfully placed the unit in the Pairing mode.menu and select this device.Operation example of the remote controlSafety precautions■Unit•Avoid using or placing this unit near sources of heat.•Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.•Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings, and construction sites.■Earpieces •Keep the earpieces out of reach of children to prevent swallowing.■Allergies•Discontinue use if you experience discomfort with the earphones or any other parts that directly contact your skin.•Continued use may cause rashes or other allergic reactions.THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA.This device complies with Part 15 of FCC Rules and Industry Canada’slicence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.FCC ID : ACJ-RP-BTS30Model : RP-BTS30IC : 216A-RPBTS30This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption ratio (SAR).THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Responsible Party: P anasonic Corporation of North AmericaTwo Riverfront Plaza, Newark, NJ 07102-5490Support Contact: /supportFCC CAUTIONAny changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.THE FOLLOWING APPLIES ONLY IN CANADA.CAN ICES-3(B)/NMB-3(B)■USB•Do not use any other USB charging cords except the supplied one.Caution: Use only the supplied USB charging cord when connecting to a computer.MaintenanceClean this unit with a dry and soft cloth.•Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior case to be deformed or the coating to come off.Keeping the battery performance•During the long period of disuse, full charge this unit once every 6 months to keep the battery performance.Troubleshooting guideBefore requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to “Customer Services Directory” if you reside in the U.S.A., or refer to “CONTACT INFORMATION” if you reside in Canada.GeneralThe unit does not respond•Connect the unit to a computer using the USB charging cord. The unit will be reset.Power supply and chargingIf you are having difficulty charging the unit•Make sure the computer is turned on and is not on standby or sleep mode.•Is the USB port you are currently using working properly? If your computer has other USB ports, unplug the connector from its current port and plug it into one of the other ports.•If the steps mentioned above are not applicable, unplug the USB charging cord and plug it in again.•If the charge time and operating time become shortened, the battery may have run down. (Number of charging times of the installed battery: Approximately 300.)LED does not light during charging / Charging takes longer•Is the USB charging cord (supplied) connected firmly to the USB terminal of the computer? (→ 1 “Charging”)•Make sure to charge in a room temperature between 10 °C and 35 °C (50 °F and 95 °F).The power does not turn on•Is the unit being charged? The power cannot be turned on during charging. (→ 1 “Charging”)Bluetooth ® device connectionThe device cannot be connected•Delete the pairing information for this unit from the Bluetooth ® device, then pairthem again. (→ 2 “Wireless pairing”)Sound and audio volumeNo sound•Make sure that the unit and the Bluetooth ® device are connected correctly.(→ 2 “Wireless pairing”)•Check if music is playing on the Bluetooth ® device.•Make sure that the unit is turned on and the volume is not set too low.•Pair and connect the Bluetooth ® device and the unit again. (→ 2 “Wireless pairing”)Low volume•Increase the volume of the unit. (→ 3 “Enjoy !”) •Increase the volume on the Bluetooth ® device.Sound from the device is cut off / Sound quality is bad•Sound may be disrupted if signals are blocked. Do not fully cover this unit with the palm of your hand, etc.•The device may be out of the 10 m (33 feet) communication range. Move the device closer to this unit.•Remove any obstacle between this unit and the device. •Switch off any wireless LAN device when not in use.•A communication problem may arise if the battery is not fully charged. Charge the unit. (→ 1 “Charging”)Phone callsYou cannot hear the other person•Make sure that the unit and the Bluetooth ® enabled phone are turned on. •Check if the unit and the Bluetooth ® enabled phone are connected. (→ 2 “Wireless pairing”)•Check the audio settings of the Bluetooth ® enabled phone. Switch the calling device to the unit if it is set to the Bluetooth ®enabled phone.•If the volume of the other person’s voice is too low, increase the volume of both the unit and the Bluetooth ® enabled phone.Enjoy !SQT1248-2 (En)Specifications ■GeneralPower supply (USB) DC 5 V, 500 mA (Internal battery: 3.7 V (Li-polymer 90 mAh))Operating time*1 (SBC mode)Approx. 6 hoursCharging time*2 (25 ºC (77 ºF))Approx. 1.5 hoursCharging temperature range10 ºC to 35 ºC (50 ºF to 95 ºF) Operating temperature range0 ºC to 40 ºC (32 ºF to 104 ºF) Operating humidity range35%RH to 80%RH (no condensation) Mass (Weight)Approx. 20 g (0.7 oz)Water resistant IPX4 equivalent*1 It may be shorter depending on the operating conditions.*2 Time taken to recharge from empty to full.■Bluetooth® sectionBluetooth® system specification Ver. 4.1Wireless equipment classification Class 2 (2.5 mW)Frequency band 2.4 GHz band FH-SSSupported profiles A2DP, AVRCP, HSP, HFPSupported codec SBCOperating distance Up to 10 m (33 ft.)■Speaker sectionDriver units9 mm (3/8 in.)■Terminal sectionDC IN(USB) DC 5 V, 500 mA■Microphone sectionType Mono■Accessory sectionUSB charging cord0.1 m (0.3 ft.)●Specifications are subject to change without notice.Useful information(For Latin American Countries Only) Customer ServiceObtain products information and operative assistant; localize the closer distributor or Service Center; buy spare parts and accessories by ourWeb Site to Latin American:The serial number of this product can be found on the right earphone. Remove the USB lid to see it.Please note them in the space provided below and keep for future reference. MODEL NUMBER RP-BTS30SERIAL NUMBERTo remove the battery when disposingof this unitThe following instructions are not intended for repairing purposes but forthe disposal of this unit. This unit is not restorable once disassembled.When disposing of this unit, take out the battery installed in this unit and recycle it.As the rechargeable battery is specifically for this product, do not use it for any otherdevice.Do not charge the removed battery.•Do not heat or expose to flame.•Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time withdoors and windows closed.•Do not pierce the battery with a nail, subject it to an impact, or dismantle or modify it.•Do not let the wires touch any other metal or each other.•Do not carry or store the battery with a necklace, hair pin, or the like.Doing so may cause the battery to generate heat, ignite, or rupture.Do not place the removed battery, and other items within reach of infants.Accidental swallowing of such an item may have an adverse effect on the body.•In the event that you think such an item has been swallowed, consult a doctor immediately.In the event of fluid leaking from the battery, take the following measure, and do not touchthe fluid with bare hands.Fluid entering into an eye may cause loss of eyesight.•Wash the eye with water immediately without rubbing it, and then consult a doctor.Fluid getting on your body or clothes may cause inflammation of the skin or injury.•Sufficiently rinse with clean water, and then consult a doctor.A lithium-ion polymer rechargeable battery is built in to the left earphone. Pleasediscard according to local regulations.When disposing this product, disassemble properly by following the procedure, and••Select a screwdriver to be large enough for a space under the upper cover.2•Be careful not to touch the battery with the screwdriver.34•Insulate the wire parts of the removed battery with cellophane tape.•Do not damage or dismantle the battery.Limited Warranty (ONLY FOR CANADA)Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario L4W 2T3PANASONIC PRODUCT – LIMITED WARRANTYEXCHANGE PROGRAMPanasonic Canada Inc. warrants this product to be free from defects in material andworkmanship under normal use and for a period as stated below from the date of originalpurchase agrees to, at its option either (a) repair your product with new or refurbished parts,(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchaseprice. The decision to repair, replace or refund will be made by Panasonic Canada Inc.Accessories including rechargeable batteries Ninety (90) daysThis warranty is given only to the original purchaser, or the person for whom it was purchasedas a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonicdealer in Canada and purchased and used in Canada, which product was not sold “as is”, andwhich product was delivered to you in new condition in the original packaging.IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, APURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE,SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIREDLIMITATIONS AND EXCLUSIONSThis warranty ONLY COVERS failures due to defects in materials or workmanship, and DOESNOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOTCOVER damages which occurred in shipment, or failures which are caused by products notsupplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse,neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments,misadjustment of consumer controls, improper maintenance, power line surge, lightningdamage, modification, introduction of sand, humidity or liquids, commercial use such as hotel,office, restaurant, or other business or rental use of the product, or service by anyone otherthan a Authorized Servicer, or damage that is attributable to acts of God.Dry cell batteries are also excluded from coverage under this warranty.THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADAINC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGESRESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OFANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damagesfor lost time, travel to and from the Authorized Servicer, loss of or damage to media orimages, data or other memory or recorded content. This list of items is not exhaustive, but forillustration only.)In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental orconsequential damages, or the exclusion of implied warranties, so the above limitations andexclusions may not be applicable. This warranty gives you specific legal rights and you mayhave other rights which vary depending on your province or territory.CONTACT INFORMATIONFor product operation and information assistance, please visit our Support page:www.panasonic.ca/english/supportFor defective product exchange within the warranty period, please contact the original dealer.。
Panasonic数字气压传感器选购指南说明书
703Related InformationFIBER SENSORS LASER SENSORS PHOTOELECTRICSENSORS MICROPHOTOELECTRICSENSORS AREA SENSORS SAFETY LIGHT CURTAINS /SAFETY COMPONENTS PRESSURE /FLOW SENSORS INDUCTIVE PROXIMITY SENSORS HUMAN MACHINEINTERFACES ENERGY DP-0 Digital Pressure Sensor Simple & easy operation* Refer to p.705 for details of operation setting mode.Select the response time from 2.5 ms, 25 ms or 250 ms.Select the comparative output ON/OFF display color and the normal display color from red or white.Digital Pressure SensorDP-0 SERIES704FIBER SENSORSLASER SENSORS PHOTOELECTRIC SENSORS MICROPHOTOELECTRIC SENSORS AREASENSORS SAFETY LIGHT CURTAINS /PROXIMITY SENSORSPARTICULAR USE SENSORSSENSOR OPTIONS SIMPLEWIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLCHUMAN MACHINE INTERFACES ENERGYMANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURINGSYSTEMSDP-100DP-MSuction confirmation for electronic partsHigh-quality LCD displayCompact & light weight designLow pressure type and high pressure type availableLow pressure type: kPa, kgf/cm 2, bar, psi, mmHg High pressure type: MPa, kgf/cm 2, bar, psiRUN mode Detailed setting mode< Actual size >24.9 mmApprox.40 g25 gDP-0 seriesConventional model(DP-100 series standard pressure port type)LowHighSimple and highly visible displayThe LCD offers a wide viewing angle so the display is easy to see even from an oblique angle. Thealphanumeric display (12-segment display), the key lock mark and the OVER mark are also clear and easy to see.Extra-short depth and light weightThe unit body measures only 24.9 mm 0.980 in in depth to allow installation in a shallow space. The main unit weighs only about 25 g. The lightweight unit meansminimal load when mounted on a moving part such as a robot arm.Comparison with conventional model DP-100 series standard pressure port type Depth dimension:Approx. 41% shorter!Main unit weight:Approx. 38% lighter!Two types to choose from depending on your applicationThe low pressure type can be used with positive or negative pressure, while the high pressure type is suitable for positive pressure of up to 1 MPa.Selection of display color from red or whiteThe display color can be selected from red or white in accordance with the output operation. Since the detailed setting mode display is pink (unchangeable), the pressure sensor status can be easily recognized by color.()705Digital Pressure Sensor DP-0SERIESFIBERSENSORSLASERSENSORSPHOTOELECTRICSENSORSMICROPHOTOELECTRICSENSORSAREASENSORSSAFETY LIGHTCURTAINS /PROXIMITYSENSORSPARTICULARUSE SENSORSSENSOROPTIONSSIMPLEWIRE-SAVINGUNITSWIRE-SAVINGSYSTEMSMEASUREMENTSENSORSSTATICCONTROLDEVICESLASERMARKERSPLCHUMAN MACHINEINTERFACESENERGYMANAGEMENTSOLUTIONSFA COMPONENTSMACHINE VISIONSYSTEMSUV CURINGSYSTEMSDP-100DP-MEnvironmentallyfriendlyConnection cable ** Options: 1 m 3.281 ft / 3 m 9.843 ft / 5 m 16.404 ft types are also available.Equipped with three output modes for use in a wide range of applicationsComparativeoutputComparativeoutputComparativeoutput(1) EASY modeThis mode is used for comparative output ON/OFF control.(2) Hysteresis modeThis mode is used for setting comparativeoutput hysteresis to the desired level and for(3) Window comparator modeThis mode is used for setting comparativeoutput ON and OFF at pressures within the *H: 4 digits (fixed) (10 digits or more when using psi unit) *H: 2 digits or more (5 digits or more when using psi unit) *H: 4 digits or more (10 digits or more when using psi unit)Exclusive mounting bracket Connection cableSupports tight installationSpace savings can also beachieved even when anL-shaped mountingbracket is used.Cable can be connected with one-touchConnector attached cable (2 m 6.562 ft), as anaccessory, can be connected easily with one-touchconnection.also availableCommercially-available connectors can be used for cableconnections. Cables in required length can be used, so thiscontributes to reduction in waste of unwanted cables.ig h t in s ta lla ti o n i s p o ss ib leCeiling mounting Floor mountingRear mountingMS-DP1-5MS-DP1-1* Refer to p.706 for recommended commercially-available connectors.Commercially-availableparts can be used!Digital Pressure SensorDP-0 SERIES706FIBER SENSORS LASER SENSORSPHOTO-ELECTRIC SENSORS MICRO PHOTO-ELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS /SAFETY INDUCTIVE PROXIMITY SENSORSPARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASURE-MENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLCHUMAN MACHINE INTERFACESENERGY MANAGEMENT SOLUTIONS FACOMPONENTS MACHINE VISION SYSTEMS UVCURINGSYSTEMSDP-100DP-MDP-001Rated pressure range1 : −100.0 to +100.0 kPa (Low pressure type)2 : 0.000 to +1.000 MPa (High pressure type)-P -JCableNone : Connector attached cable 2 m 6.562 ft J : Type without connector attached cable Comparative output None : NPN output type P : PNP output typeModel No.CN-14A-C2(Connector attached cable Type without connector attached cableAccessoryType without connector attached cable CN-14A-C2 is available. When orderingthis type, suffix “-J ” to the Model No.(e.g.) Type without connector attached cable of DP-001-P is “DP-001-P-J ”••CN-14A-C2 (Connector attached cable 2 m 6.562 ft )Note: The connector attached cable CN-14A-C2 is supplied with the DP-0 series.Recommended connectorContact: SPHD-001T-P0.5, Housing: PAP-04V-S(Manufactured by J.S.T. Mfg. Co., Ltd.)Recommended crimping toolModel No.: YC-610R(Manufactured by J.S.T. Mfg. Co., Ltd.)Recommended connector (e-CON)Applicable connector: 37104-3122-000 FL (Manufactured by 3M Japan Limited)Note: Contact the manufacturer for detailsof the recommended products.707Digital Pressure Sensor DP-0SERIESFIBER SENSORSLASER SENSORSPHOTO-ELECTRIC SENSORSMICRO PHOTO-ELECTRIC SENSORSAREA SENSORSSAFETY LIGHT CURTAINS /SAFETYINDUCTIVE PROXIMITY SENSORSPARTICULARUSE SENSORSSENSOR OPTIONSSIMPLE WIRE-SAVINGUNITSWIRE-SAVINGSYSTEMSMEASURE-MENT SENSORSSTATIC CONTROL DEVICESLASER MARKERSPLCHUMAN MACHINE INTERFACESENERGY MANAGEMENT SOLUTIONSFA COMPONENTSMACHINE VISION SYSTEMSUV CURINGSYSTEMSDP-100 DP-MNote: Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F.Digital Pressure SensorDP-0 SERIES708FIBER SENSORS LASER SENSORSPHOTO-ELECTRIC SENSORS MICRO PHOTO-ELECTRIC SENSORS AREA SENSORSSAFETY LIGHT CURTAINS /SAFETY INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMSMEASURE-MENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLCHUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FACOMPONENTS MACHINE VISION SYSTEMS UVCURINGSYSTEMSDP-100DP-MNPN output type Terminal arrangement diagramNote: Open or, connect to 0 V.I/O circuit diagramNote: Open or, connect to 0 V.Symbols…D 1, D 2: Reverse supply polarity protection diodeZ D : Surge absorption zener diode Tr: NPN output transistorPNP output type Note: Open or, connect to 0 V.Terminal arrangement diagramI/O circuit diagramNote: Open or, connect to 0 V.Symbols…D 1, D 2: Reverse supply polarity protection diodeZ D : Surge absorption zener diode Tr: PNP output transistor709Digital Pressure Sensor DP-0SERIESFIBER SENSORSLASER SENSORSPHOTO-ELECTRIC SENSORSMICRO PHOTO-ELECTRIC SENSORSAREA SENSORSSAFETY LIGHT CURTAINS /SAFETYINDUCTIVE PROXIMITY SENSORSPARTICULARUSE SENSORSSENSOR OPTIONSSIMPLE WIRE-SAVINGUNITSWIRE-SAVINGSYSTEMSMEASURE-MENT SENSORSSTATIC CONTROL DEVICESLASER MARKERSPLCHUMAN MACHINE INTERFACESENERGY MANAGEMENT SOLUTIONSFA COMPONENTSMACHINE VISION SYSTEMSUV CURINGSYSTEMSDP-100 DP-MPart descriptionModePiping•When using this product, connect a joint available in the marketto the pressure port. At the time, the tightening torque should be1.0 N·m or less.Mounting•Use sensor mounting bracket MS-DP1-1 preparedindependently.When mounting this product with sensor mounting bracket, etc.,Sensor mountingbracket MS-DP1-1(Optional)•Panel mounting bracket MS-DP1-8 (optional) and front protectioncover MS-DP1-3 (optional) are available.•For the method for mounting panel mounting bracket, refer to theinstruction manual that came with the MS-DP1-8.Wiring•Make sure that the power supply is OFF while performing thewiring operation.•Verify that the supply voltage variation is within the rating.•If power is supplied from a commercial switching regulator,ensure that the frame ground (F.G.) terminal of the power supplyis connected to an actual ground.•In case noise generating equipment (switching regulator, invertermotor, etc.) is used in the vicinity of this product, connect theframe ground (F.G.) terminal of the equipment to an actualground.•When extending the cable, use a cable whose conductor cross-section area is 0.3 mm2 or more. The cable can be extended toup to 10 m 32.808 ft in total length.•Do not run the wires together with high-voltage lines or powerlines or put them in the same raceway. This can causemalfunction due to induction.•Do not apply stress directly to the connection cable leader or tothe connector.ConnectionHow to connect•Insert the cable with connectorCN-14A(-R)‑C□ into this product’sconnection connector section as shownin the right figure.How to disconnect•Pressing the release lever of the cablewith connector, pull out the connector.Note: Do not pull by holding the cable without pressing the release lever, asthis can cause cable break or connector break.Factory settingError indicationWhen other error massage is displayed, contact us.Others•This product has been developed / produced for industrial useonly.•The product shall be used only within the rated pressure range.•Do not apply pressure exceeding the pressure resistance.Otherwise, destruction of diaphragm occurs, preventing theproduct to perform normal operation.•Do not use during the initial transient time (0.5 sec.) after thepower supply is switched ON.•The specification may not be satisfied in a strong magnetic field.•This product is suitable for indoor use only.•Take care that strong impact such as fall is not given to thisproduct. Otherwise, it may be destroyed.•Avoid dust, dirt, and steam.•Take care that the product does not come into contact withorganic solvents such as thinner.•Take care that the product does not come into contact with oil orgrease.•Take care that the product does not come into contact withstrong acid or alkaline.•Do not insert wire into the pressure port. Otherwise, destructionof diaphragm occurs, preventing the product to perform normaloperation.Digital Pressure SensorDP-0 SERIES710FIBER SENSORS LASER SENSORS PHOTO-ELECTRIC SENSORSMICRO PHOTO-ELECTRIC SENSORS AREA SENSORSSAFETY LIGHT CURTAINS /SAFETY INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASURE-MENT SENSORS STATIC CONTROL DEVICES LASER MARKERSPLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FACOMPONENTS MACHINE VISION SYSTEMS UVCURINGSYSTEMSDP-100DP-MDP‑00□SensorMS-DP1-1Sensor mounting bracket (Optional)Assembly dimensionsMaterial: Cold rolled carbon steel (SPCC) (Trivalent uni-chrome plated)Two M3 (length 6 mm 0.236 in ) screws with washers are attached.MS-DP1-5Sensor mounting bracket (Optional)Assembly dimensionsMaterial: Stainless steel (SUS304)Two M3 (length 6 mm 0.236 in ) screws with washers are attached.R6.75711Digital Pressure SensorDP-0SERIESFIBER SENSORS LASER SENSORS PHOTO-ELECTRIC SENSORS MICRO PHOTO-ELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS /SAFETY INDUCTIVE PROXIMITY SENSORS PARTICULARUSE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVINGUNITS WIRE-SAVING SYSTEMS MEASURE-MENT SENSORS STATIC CONTROL DEVICES LASER MARKERSPLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FACOMPONENTS MACHINE VISION SYSTEMS UV CURINGSYSTEMSDP-100DP-MMS-DP1-8 MS-DP1-3Panel mounting bracket (Optional), Front protection cover (Optional)Mounting drawing with DP‑00□View AMaterial: Polyacetal (Panel mounting bracket)Polycarbonate (Front protection cover)MS-DP1-7Material: Brass (Nickel plated)Weight: 10 g approx.Assembly dimensionsConversion bushing (Optional)When 1 unit is installed−0.016When “n” units are installed horizontally in seriesWhen “n” units are installed vertically in series3.5 0Note: The panel thickness should be1 to 3 mm 0.039 to 0.118 in .Note: The panel thickness should be1 to 3 mm 0.039 to 0.118 in .Panel cut-out dimensions712 MEMO。
松下 H-FS014042 说明书
Operating Instructions INTERCHANGEABLE LENS FOR DIGITAL CAMERAVQT2U00ContentsInformation for Your Safety (2)Precautions (5)Supplied Accessories (6)Attaching/Detaching the Lens (6)Names and Functions of Components (8)Cautions for Use (9)Troubleshooting (10)Specifications (11)Limited Warranty (12)-If you see this symbol-THE FOLLOWING APPLIES ONLY IN CANADA.Information for Your Safety Keep the unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games, radio transmitters, high-voltage lines etc.).≥Do not use the camera near cell phones because doing so may result in noise adversely affecting the pictures and sound.≥If the camera is adversely affected by electromagnetic equipment and stops functioning properly, turn the camera off and remove the battery and/or the connected AC adaptor. Then reinsert the battery and/ or reconnect the AC adaptor and turn the camera on. The lens can be used with a digital camera compatible with the lens mount standard for the “Micro Four Thirds System”.≥It cannot be mounted on the Four Thirds TM mount specification camera.Information on Disposal in other Countries outside the European UnionThis symbol is only valid in theEuropean Union.If you wish to discard thisproduct, please contact yourlocal authorities or dealer andask for the correct method ofdisposal.This Class B digital apparatus complies with Canadian ICES-003.2VQT2U00≥The digital camera illustrations in these operatinginstructions show DMC-G2 as an example.≥The appearance and specifications of productsdescribed in this manual may differ from the actualproducts you have purchased due to laterenhancements.≥Four Thirds TM and Four Thirds Logo marks aretrademarks or registered trademarks of OlympusImaging Corporation, in Japan, the United States,the European Union and other countries.≥Micro Four Thirds TM and Micro Four Thirds Logomarks are trademarks or registered trademarks ofOlympus Imaging Corporation, in Japan, theUnited States, the European Union and othercountries.≥G MICRO SYSTEM is a lens exchange typedigital camera system of LUMIX based on a MicroFour Thirds System standard.≥Other names, company names, and productnames printed in these instructions aretrademarks or registered trademarks of thecompanies concerned.3VQT2U00THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:●Reorient or relocate the receiving antenna.●Increase the separation between the equipment and receiver.●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.●Consult the dealer or an experienced radio/TV technician for help.Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Responsible Party:Panasonic Corporation of North AmericaOne Panasonic WaySecaucus, NJ 07094Support Contact:Panasonic Consumer Electronics CompanyTelephone No.: 1-800-211-PANA (7262)4VQT2U00∫Lens Care≥Sand and dust can damage the lens. Make sure that no sand or dust gets inside the lens or the terminals when using the lens on a beach, etc.≥This lens is not waterproof. If drops of water get onto the lens, wipe the lens with a dry cloth.≥Do not press the lens with excessive force.≥When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the picture may be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking pictures.≥Do not place the lens mount facing downwards. Do not allow the lens contact point 1 to become dirty.∫About Condensation (Fogging of the Lens)≥Condensation occurs when there are differences in temperature and humidity as described below. Condensation can cause the lens to become dirty and lead to mold and malfunctioning, so exercise caution in the following situations:–When the camera is brought indoors from outside during cold weather–When the camera is brought into an air-conditioned car–When cold air from an air conditioner is directly blown onto the lens–In humid places≥Put the camera into a plastic bag to allow it to acclimatize to the surrounding temperature in order to prevent condensation. If condensation occurs, turn the power off and leave it for about two hours. Once the camera acclimatizes to the surrounding temperature the condensation will go away naturally.5 VQT2U004Contact point5Lens fitting markNote≥When flash recording with a close subject, the light of the flash will be blocked by the lens and part of the picture may be dark. Check the distance from the subject when recording.Cautions for Use∫About the LensTake care not to drop or knock the lens. Also take care not to put a lot of pressure on the lens.≥Take care not to drop the bag that you inserted the lens in as it may damage the lens. The camera may stop operating normally and pictures may no longer be recorded.When using pesticides and other volatile substances around the camera make sure that they do not get onto the lens.≥If such substances get onto the lens they can damage the exterior case or cause the paint to peel. Do not carry the unit when it is still attached to the camera body.≥Under no circumstances should the unit be stored in any of the following locations since doing so may cause problems in operation or malfunctioning.–In direct sunlight or on a beach in summer–In locations with high temperatures and humidity levels or where the changes in temperature and humidity are acute–In locations with high concentrations of sand,dust or dirt–Where there is fire9VQT2U00–Near heaters, air conditioners or humidifiers–Where water may make the unit wet–Where there is vibration–Inside a vehicle≥Refer also to the operating instructions of the digital camera.≥When the unit is not going to be used for a prolonged period, mold and other problems may cause performance failure. It is recommended that you check the unit’s operation prior to use.≥Do not leave the lens in contact with rubber or plastic products for extended periods of time.≥Do not touch the lens contact point. Doing so can cause failure of the unit.≥Do not disassemble or alter the unit. If the internal parts require inspection or repair, take the unit to the vendor.Do not use benzine, thinner, alcohol or other similar cleaning agents to clean the lens glass or exterior cabinet.≥Using solvents can damage the lens or cause the paint to peel.≥Wipe off any dust or fingerprints with a soft, dry cloth.≥Use a dry, dust cloth to remove dirt and dust on the zoom ring and the focus ring.≥Do not use a household detergent or a chemically treated cloth.A sound is heard when the camera is turned on or off.≥This is the sound of lens or aperture movement and is not a malfunction.When this lens is attached to digital camera, stabilizer function cannot be turned off or stabilizer function does not work.≥The Optical Image Stabilizer function of this lens only works correctly with supported cameras.>When older Panasonic digital cameras (DMC-GF1, DMC-GH1, DMC-G1) are used,[STABILIZER] in the [REC] mode menu cannot be set to [OFF]. It is recommended to update thefirmware of the digital camera at the followingwebsite.http://panasonic.jp/support/global/cs/dsc/download/>When using this lens with another make of digital cameras, the Optical Image Stabilizer function will not work. (As of March 2010)For details, contact the respective company.10VQT2U00SpecificationsINTERCHANGEABLE LENS FOR DIGITAL CAMERA“LUMIX G VARIO 14–42mm/F3.5–5.6 ASPH./MEGA O.I.S.”Focal length f=14mm to 42mm(35mm film camera equivalent: 28mm to 84mm)Aperture type7leaf shutters/iris diaphragm/circular diaphragmAperture range F3.5 (Wide) to F5.6 (Tele)Minimum aperture value F22Lens construction12elements in 9groups (1aspherical lens)In focus distance0.3m (0.99feet) to ¶ (from the focus distance reference line) Maximum image magnification0.16k (35mm film camera equivalent: 0.32k)Optical image stabilizer Available[O.I.S.] switch None(Setting of the [STABILIZER] is done in [REC] mode menu byLUMIX digital cameras.)Mount“Micro Four Thirds Mount”Angle of view75x (Wide) to 29x (Tele)Filter diameter52mm (2.05inch)Max. diameter60.6mm (2.39inch)Overall length Approx. 63.6mm (2.50inch)(from the tip of the lens to the base side of the lens mount)Mass (Weight)Approx. 165g (0.22lb)11VQT2U0012VQT2U00Limited WarrantyLimited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.Y ou must Mail-In your product during the warranty period. This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold “as is”.Mail-In Service For assistance in obtaining service in the United States and Puerto Rico please contact:Panasonic Camera and Digital Service Center 1590 Touhy Ave.Elk Grove Village, IL 60007PANASONIC CONSUMER ELECTRONICS COMPANY,DIVISION OF PANASONIC CORPORATION OF NORTH AMERICAOne Panasonic Way, Secaucus, New Jersey 07094Digital Still Camera ACCESSORIES LIMITED WARRANTYPRODUCT OR PART NAMEPARTS LABOR Interchangeable Lens for Digital Camera 1 (ONE) YEAR 1 (ONE) YEARIf repair is needed during the warranty period the purchaser will be required to furnish a sales receipt/proof of purchase indicating date of purchase.Also, purchaser will be responsible for shipping the unit to the above address.Limited Warranty Limits And ExclusionsThis warranty ONL Y COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.(As examples, this excludes damages for lost time, travel to and from the servicer, or loss of, or fail-ure to obtain, images, data or other camera memory content. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This warranty gives you specific legal rights and you may also have others rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.P ARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.13VQT2U00Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario L4W 2T3PANASONIC PRODUCT – LIMITED WARRANTYPanasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.Digital Camera One (1) year, parts and labourDigital Photo Peripherals One (1) year, parts and labourDigital Camera Accessories Ninety (90) days, parts and labourThis warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED 14VQT2U00This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, improper batteries, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Authorized Servicer, or damage that is attributable to acts of God.Dry cell batteries, printer ink cartridge and paper are also excluded from coverage under this warranty.Rechargeable batteries are warranted for ninety (90) days from date of original purchase.THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.)In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory.WARRANTY SERVICEFor product operation and information assistance, please contact:Our Customer Care Centre:Telephone: 1-800-99-LUMIX (1-800-995-8649)Fax # : (905) 238-2360Email link: “LUMIX Concierge # Contact us # email” onhttps://concierge.panasonic.caFor defective product exchange within the warranty period, please contact the original Dealer or our Customer Care Centre.15VQT2U00。
Panasonic AC适配器使用说明书
The AC adaptor is designed for supplying power to the Panasonic computer series. Before using the AC adaptor, read this instruction manual and the relevant portions of the com-puter’s instruction manual carefully.AC Adaptor 电源适配器電源變壓器CF-AA1633A© 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.Printed in JapanDFQW5054ZA FJ0407-0*DFQW5054ZA*AC 어댑터는 Panasonic 컴퓨터 시리즈에 전원을 공급할 수 있도록 설계되었습니다. AC 어댑터를 사용하기 전에 본 사용 설명서 및 컴퓨터 사용 설명서의 관련 부분을 주의 깊게 읽어 보십시오.该电源适配器专为Panasonic 系列计算机提供电能而设计。
用户在使用该电源适配器前，请先仔细阅读该使用手册和计算机的相应部件使用说明书。
本電源變壓器專為Panasonic 電腦系列提供電源而設計。
使用本電源變壓器之前，請詳讀本說明手冊和電腦使用說明書的相關部分。
OPERATING INSTRUCTIONS使用说明书操作指示사용 설명서AC Plug 交流插头AC 插頭AC 플러그CONNECTION /连接/連接/연결Into the DC-IN Jack of Computer插入计算机的DC-IN （直流输入）插孔插入電腦的DC-IN 插孔컴퓨터의DC-IN 잭에 연결Into the AC Outlet 插入交流电源插座插入AC 電源插座AC 콘센트에 연결AC Cord 交流电源线AC 電源線AC 코드AC Adaptor 电源适配器電源變壓器AC 어댑터DC Plug 直流插头DC 插頭DC 플러그CautionIf a Malfunction Occurs, Immediately Unplug the AC Plug • This product is damaged• Foreign object inside this product • Smoke emitted• Unusual smell emitted • Unusually hotContinuing to use this product while any of the above conditions are present may result in fi re or electric shock.• If a malfunction occurs, immediately unplug the AC plug. Then, con-tact your technical support of fi ce.Do Not Touch This Product and Cable When It Starts Thun-deringElectric shock may result.Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet Otherwise, a fi re due to overheating may result. Connecting to a DC/AC converter (inverter) may damage the AC adaptor. On an airplane, only connect the AC adaptor/charger to an AC outlet speci fi cally ap-proved for such use.Do Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC AdaptorDo not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly.Continuing to use a damaged cord may result in fi re, short circuit, or electric shock.Do Not Pull or Insert the AC Plug If Your Hands Are Wet Electric shock may result.Clean Dust and Other Debris of the AC Plug RegularlyIf dust or other debris accumulates on the plug, humidity, etc. may cause a defect in the insulation, which may result in a fi re.• Pull the plug, and wipe it with a dry cloth.Pull the plug if the computer is not being used for a long period of time.Insert the AC Plug Completely If the plug is not inserted completely, fi re due to overheating or elec-tric shock may result.• Do not use a damaged plug or loose AC outlet.Hold the Plug When Unplugging the AC PlugPulling on the cord may damage the cord, resulting in a fi re or electric shock.Do Not Move This Product While the AC Plug Is Connected The AC cord may be damaged, resulting in fi re or electric shock.• If the AC cord is damaged, unplug the AC plug immediately.Do Not Subject the AC Adaptor To Any Strong ImpactUsing the AC adaptor after a strong impact such as being dropped may result in electric shock, short circuit, or fi re.Be Absolutely Sure To Use the AC Adaptor With the Speci-fi ed Product *1Use with any other product may result in a fi re.*1For information about the products for which AC adaptor can be used, refer to the Operating Instructions of your product or various sources.ENGLISHV oltageInput 100 V–240 V AC *2Output 16.0 V DC, 3.75 A Dimensions (W H D)Approx. 110 mm 29 mm 45 mm {4.3" 1.1" 1.8"}Weight(Except AC Cord)Approx. 235 g {Approx. 0.52 lb.}*2Use only the supplied AC cord for this AC adaptor.The AC cord for North America is compatible up to 125 V .Specifi cations简体中文发生故障时，应立即拔下交流插头• 本品受损• 本品内有异物• 放出烟雾• 放出异味• 过热发生上述情况之一时，如继续使用本品，则可能引起火灾或触电。
松下AEP光伏继电器英文手册01
ORDERING INFORMATION10A PC board type10A TM type60A Screw terminal type80A Connector type300A Connector typeFEATURES1. High-voltage, high-current controlcapable400V DC high-voltage switching cutoffhas been achieved thanks to a sealedconstruction with mixed hydrogen gasand the magnetic arc motion through useof a permanent magnet.2. Compact & Low Operating SoundBy using a capsule contact mechanismthat is enclosed with hydrogen gas, high-capacity cutoff is possible even with a tinycontact gap. There is little operatingsound, which does not change evenwhen large currents are cut off.3. Arc space unnecessaryThe enclosure box can be made smallerthanks to an arc-space-free constructionfrom which the arc will not get out.4. SafetySince the contacts are enclosed in asealed capsule structure, the arc will notget out, which ensures safety.5. High contact reliabilityThe contact part is hermetically sealedwith H2 mixed gas, hence the contactresistance remains stable regardless ofthe ambient conditions.6. Mounting direction is not specifiedThe weight of the movable parts is light,and also the restoring force is large,hence the relay is relatively unaffected bygravity.7. Wide selection of models available.T ypes include PC board type, TM type(10A), screw terminal type (60A), andconnector type (80A and 300A).8. Standard complianceThe 60A type is UL and C-UL standardcertified.TYPICAL APPLICATIONS1. Cogeneration systems2. Battery inspection and testingequipment (charge and dischargecontrol)3. Construction machinery4. AGV (Automatic guided vehicle)(Unmanned transport carts)5. Welding equipment6. Inverter control7. Solar power generation systems8. Elevator, etc.EP RelayContact arrangement1: 1 Form A3: 1 Form A PC board type*5: 1 Form A TM type*AEP0Contact rating1: 10A6: 60A8: 80A9: 300ACoil voltage12:24:48:X0:12V DC24V DC48V DC*100V DC*Note: *10A type onlyEPTYPESNotes:* One female connector lead wire for connecting is packaged with the 80A and 300A connector types.-Specifications: Housing: Y azaki 7283-1020 (light gray); Lead wire: 0.5 mm 2 dia. and 300±10 mm length Lead wire coating color: Pin No. 1: white; Pin No. 2: greenRATING1. Coil data*When using a DC power supply use one that has a leeway of at least 150% current capacity.TtpeNominal coil voltageContact arrangementPart No.Packing quantityCarton Case 10A PC board type 12V DC1 Form AAEP3101225pcs.100pcs.10A TM type AEP5101225pcs.100pcs.60AAEP160121pc.20pcs.80A Connector type*AEP180121pc.20pcs.300A Connector type*AEP190121pc.5pcs.10A PC board type 24V DCAEP3102425pcs.100pcs.10A TM type AEP5102425pcs.100pcs.60AAEP160241pc.20pcs.80A Connector type*AEP180241pc.20pcs.300A Connector type*AEP190241pc.5pcs.10A PC board type 48V DC AEP3104825pcs.100pcs.10A TM typeAEP5104825pcs.100pcs.10A PC board type 100V DCAEP310X025pcs.100pcs.10A TM typeAEP510X025pcs.100pcs.T ype Nominal coil voltagePick-up voltage (at 20°C 68°F )Drop-out voltage (at 20°C 68°F )Nominal coil current [±10%] (at 20°C 68°F )Nominal operating power (Nominal voltage applied to the coil, at 20°C 68°F )Max. allowablevoltage10A 12V DC 75%V or less of nominal voltage(Initial)8%V or more of nominal voltage(Initial)0.103A Max.1.4W130%V of nominal voltage60A 0.415A Max. 5W 80A 0.375A Max. 5W300A 3.3A (during peak)When input: 40 W max. (0.1 sec. from time of input) When retained: 4 W max.10A 24V DC0.052A Max.1.4W 60A 0.208A Max. 5W 80A 0.188A Max. 5W300A 1.85A (during peak)When input: 45 W max. (0.1 sec. from time of input) When retained: 4 W max.10A 48V DC 0.026A Max.1.4W10A100V DC0.012AEP*3Condition: Switches rated number of 10 cycles each time there is a 2,500A cutoff.REFERENCE DATA1.-(1) Ambient temperature characteristics (10A type)T ested sample: 10A type EP relay, 3pcs1.-(2) Ambient temperature characteristics (60A type)T ested sample: 60A type EP relay, 3pcs1.-(3) Ambient temperature characteristics (80A type)T ested sample: 80A type EP relay, 3pcsEP1.-(4) Ambient temperature characteristics (300A type)T ested sample: 300A type EP relay, 3pcs 2.-(1) Max. value for switching capacity(10A and 60A types)2.-(2) Max. value for switching capacity(80A and 300A types)ontactcurrent,Aontactcurrent,A3.-(1) Switching life curve (10A type) 3.-(2) Switching life curve (60A type) 3.-(3) Switching life curve (80A type)ife(cycle)ife(×13cycle)ife(cycle)3.-(4) Switching life curve (300A type)4. Cut-off curve (forward direction)5.-(1) Carrying performance curve (80°C)(10A and 60A types)ife(cycle)Cut-off current, Aife(cycle)1010ime,sec5.-(2) Carrying performance curve (80°C)(80A and 300A types)1010ime,secEPDIMENSIONS (Unit: mm inch )1. 10A PC board type2. 10A TM typeExternal dimensionsSchematic (Bottom view)PC board pattern (Bottom view)Notes:1.We recommend through-hole plating withland on both sides.2.Be careful of the insulation distancebetween land patterns with regards to the circuit voltage you will use.2Load sides have polarities (+) and (–).After doing through-hole plating+0.1+.004General tolerance:Max. 10 .394 ±0.3 ±.01210 .394 to 50 1.969 ±0.6 ±.024Min. 50 1.969 ±1.0 ±.039External dimensions.016Schematic (T op view)Panel cut-off5:CoilLoad sides have polarities (+) and (–).6:CoilMounting hole 2-4.2±0.1 dia.General tolerance:Max. 10 .394 ±0.3 ±.01210 .394 to 50 1.969 ±0.6 ±.024Min. 50 1.969 ±1.0 ±.039EP3. 60A type4. 80A typeExternal dimensionsSchematic (T op view)Panel cut-off6: Coil 5: Coil2–1+Load side has polarities (+) and (–).General tolerance:Max. 10 .394 ±0.3 ±.01210 .394 to 50 1.969 ±0.6 ±.024Min. 50 1.969 ±1.0 ±.039External dimensions57.9Schematic (T op view)Panel cut-off*Accessories (included)General tolerance:Max. 10 .394: ±0.3 ±.01210 .394 to 50 1.969: ±0.6 ±.024Min. 50 1.969: ±1.0±.039−1Load sides have polarities (+) and (−).EP5. 300A typeExternal dimensionsSchematic (T op view)Panel cut-off*Accessories (included)General tolerance:Max. 10 .394: ±0.3 ±.01210 .394 to 50 1.969: ±0.6 ±.024Min. 50 1.969: ±1.0 ±.039+)−1Input and load sides have polarities (+) and (−).EPNOTESFor Cautions for Use, see Relay Technical Information.1. When installing the relay, always use washers to prevent the screws from loosening.Tighten each screw within the rated range given below. Exceeding themaximum torque may result in breakage. Mounting is possible in either direction.•M5 screw (60A, 80A and 300A main unit mounting section): 3 to 4N·m •M3.5 screw (60A input terminal): 0.84 to 1.2 N·m•M4 screw (10A PC board type main unit mounting section): 0.98 to 1.2N·m (10A TM type main unit mounting section): 1.8 to 2.7N·mRecommended securing torque on load side terminals•60A/M5 screw: 2.5 to 3.6 N·m •80A/M5 bolt: 3.5 to 6.5 N·m •300A/M8 bolt: 10 to 12 N·m2. The contacts of the relay arepolarized. Please follow instructions in the connection schematic when connecting the contacts.We recommend installing a surgeprotector varistor (ZNR) for the 10A , 60A and 80A types. Avoid using a diode as this may result in decreased cut-off capability.3. Do not use a relay if it has been dropped.4. Avoid mounting the relay in strong magnetic fields (near a transformer or magnet) or close to an object that radiates heat.5. Electrical lifeThis relay is a high-voltage direct-current switch. In its final breakdown mode, it may lose the ability to provide the proper cut-off. Therefore, do not exceed the indicated switching capacity and life. (Please treat the relay as a product with limited life and replace it when necessary.)In the event that the relay loses cut-off ability, there is a possibility that burning may spread to surrounding parts, so configure the layout so that the power is turned off within one second and from the point of view of safety, consider installing a failsafe circuit in the device.Also, in order to avoid increased contact resistance, do not operate when there is no switching load.6. Permeation life of internal gasThis relay uses a hermetically encased contact (capsule contact) with gas inside. The gas has a permeation life that is affected by the temperature inside thecapsule contact (ambient temperature + temperature rise due to flow of electrical current). For this reason, make sure the ambient operating temperature isbetween –40 and 80°C –40 and +176°F , and the ambient storage temperature is between –40 and 85°C –40 and +185°F .7. Do not disassemble the relay.Please note that disassembling the relay will invalidate the warranty.8. If the power is turned off and then immediately on after applying the rated voltage (current) continuously to therelay’s coil and contact, the resistance of the coil will increase due to a rise in the coil temperature. This causes the pick-up voltage to rise, and possibly exceed the rated pick-up voltage. In thesecircumstances, take measures such as reducing the load current, limiting the duration of current flow, and applying a coil voltage higher than the rated operating voltage.9. Coil operating powerPure DC current should be applied to the coil. The wave form should berectangular. If it includes ripple, the ripple factor should be less than 5%. However, check the actual circuit since thecharacteristics may be slightly different.The power supply waveform supplied to the coil should be rectangular.10. Don’t exceed maximum coil voltage. Exceeding maximumallowable coil voltage on continuous basis will damage the relay and could case failure.11. Ensure that the rated contacts voltage and current values are not exceeded.12. The rated control capacity and life are given as general guides.The contact life is heavily influenced by the type of load and other related conditions, and these factors must be kept in consideration when using the relay.13. Main contact ratings in the ratings apply to when there is a resistive load. If you are using an inductive load (L load) such that L/R > 1 ms, add surge protection in parallel with theinductive load. If this is not done, the electrical life will decrease and cut-off failure may occur.14. Be careful that foreign matter and oils and fats kind don’t stick to the main terminal parts because it is likely to cause terminal parts to give offunusual heat. Also, please use the following materials for connected harnesses and bus bars.•10A TM type: Faston terminal for #187 tab terminal, 0.5 mm board thickness (JIS C2809-1992 compliant, flat type connection terminal)Harness nominal cross-sectional area Load input terminal: min. 2.0 mm 2Coil input terminal: min. 0.3 mm 2•60A and 80A types: Min. 14mm 2 nominal cross sectional area•300A type: Min. 100mm 2 nominal cross sectional area15. Use 40N to 70N of force as a guide to fasten the terminal connected to the 10A TM type. Please use caution when inserting or removing the terminal as the relay tab terminal may cause injuly.16. Place the PC board mount type (10A PC board type) securely by hand soldering after attaching it using M4 screw. Don’t submerge assembled board in cleaning solvent or water. Also, be careful not let flux overflow up from the PC board or adhere to the base of the relay.Recommended hand soldering conditions• Soldering iron: 30 to 60 W • Tip temperature: 400°C 752°F• Solder time: within approx. 5 seconds 17. Make sure the power is turned off when wiring.18. Incorrect wiring may causeunexpected malfunction and failure.19. Regarding AC cutoff, although there is no contact polarity, generally it is thought that the electrical life will shorten due to cutoff in the reverse direction, compared to DC cutoff. Confirm electrical life using actual load. In the case of DC cut-off, please note the contact polarity.20. Lead-free solder (tin, silver and copper) is used as pre-solder for the terminals of the PC board mount type (10A PC board type).21. The warranted tensile strength of the female connector lead wire used for connection that comes with the 80A and 300A connector type when attaching it to the relay body is 100N. Avoid excessive tension as this is a cause of broken wires and damage. Also, insert the female connectordeeply and make sure the connection is secure.。
松下送丝装置使用说明书
●非常感谢您购买了Panasonic 产品。
●用前请仔细阅读本说明书并妥善保管，以备今后查阅。
●产品序列号：YW-50DEW1HPF唐山松下产业机器有限公司TSM81409-02送丝装置使用说明书型号：YW-50DEW■装箱明细送丝装置1台喉箍( 14)1个导丝管1个(碳钢/不锈钢用)使用说明书1本■目录使用之前1、安全注意事项Ⅰ2、敬请遵守的安全事项Ⅱ规格3、额定规格1连接4、外形尺寸图25、连接方式3使用方法6、使用前的准备5 6.1、设置使用场所5 6.2、焊丝的安装6 6.3、盘轴的制动调解8检修·保养7、检修·保养10技术资料8、电气原理图119、部品明细1210、选购品1511、产品中有害物质的名称及含量1安全注意事项●使用前请认真阅读此说明书，以便正确使用。
●本说明书所列注意事项，目的是为了确保机器的安全使用，并保证您和他人免受危害和伤害。
●本产品设计和制作充分考虑了安全性，使用时请务必遵守本说明书中的注意事项，否则会引起重大事故。
●错误使用本产品会造成以下三种不同程度的危害和伤害，对此本说明书用警示符和信号用语以示警告。
警示符内容如不避免则将会导致死亡或严重伤害的某种紧急危害情况危险如不避免则可能导致死亡或严重伤害的某种潜在的危害情况警告如不避免则可能导致轻微或中度伤害的某种潜在的危害情况注意在机器的使用上，用如下所示的符号表示「必须做」与「禁止做」。
必须做例如「接地」禁止做以上符号用于一般场合◆免责声明：符合下述任何一种情况时，本公司及本产品的销售商将不承担责任：1、未实施正常的保养、维修以及定期检查而造成的损坏；2、自然灾害或其他不可抗力造成的损坏；3、本公司产品以外的产品、部件不良引发的本公司产品不良，或者将本公司产品和本公司以外的产品、部件、电路、软件等组合使用而引发的问题；4、误操作、异常运转、其他非本公司责任引发的不良；5、由于使用本产品（包含使用本产品制造出的产品为对象的纷争）而引发的知识产权问题（工艺、方法等专利问题）；6、由于本产品的原因而造成的利益损失、工时损失等损害或者其他间接损害、派生损害等。
松下FC电容
Aluminum Electrolytic Capacitors/FC274765 2.010000.45 1.5 5.0 2.5EEAFC0J270( )200200056571200.95010000.45 2.0 5.0 2.5EEAFC0J560( )200200068411120 1.3010000.45 1.5 5.0 2.5EEUFC0J680( )20020001005111750.8010000.50 2.0 5.0 2.5EEUFC0J101( )2002000120 6.372000.45010000.45 2.5 5.0 2.5EEAFC0J121( )20020001505152350.5010000.50 2.0 5.0 2.5EEUFC0J151( )2002000220 6.311.22900.35010000.50 2.0 5.0 2.5EEUFC0J221( )2002000270 6.311.22900.35010000.50 2.0 5.0 2.5EEUFC0J271( )2002000330 6.311.22900.35010000.50 2.5 5.0 2.5EEUFC0J331S( )20020006.3154000.25010000.50 2.5 5.0 2.5EEUFC0J331( )2002000390811.55550.11720000.60 3.5 5.0EEUFC0J391( )2001000470811.55550.11720000.60 3.5 5.0EEUFC0J471( )2001000560811.55550.11720000.60 3.5 5.0EEUFC0J561( )20010008208157300.08520000.60 3.5 5.0EEUFC0J821L( )20010001012.57550.09030000.60 5.0 5.0EEUFC0J82120050010001012.57550.09030000.60 5.0 5.0EEUFC0J102( )20050012008209950.06520000.60 3.5 5.0EEUFC0J122L( )2001000101610500.06830000.60 5.0 5.0EEUFC0J122( )2005001500102012200.05230000.60 5.0 5.0EEUFC0J152( )20050012.51512050.06550000.60 5.0 5.0EEUFC0J152S( )2005001800102514400.04530000.60 5.0 5.0EEUFC0J1822005002200102514400.04530000.60 5.0 5.0EEUFC0J222( )200500161516900.04350000.807.57.5EEUFC0J222S( )1002502700103018150.03530000.60 5.0EEUFC0J272L 10012.52016550.03850000.60 5.0 5.0EEUFC0J272( )200500161516900.04350000.807.57.5EEUFC0J272S( )100250330012.52016550.03850000.60 5.0 5.0EEUFC0J332( )200500181520000.03850000.807.57.5EEUFC0J332S( )100250390012.52519450.03050000.60 5.0 5.0EEUFC0J392( )200500470012.53023100.02550000.80 5.0EEUFC0J472100162022050.02950000.807.57.5EEUFC0J472S( )100250560012.53525100.02250000.80 5.0EEUFC0J562L 100162022050.02950000.807.57.5EEUFC0J562( )100250680012.54026550.01850000.80 5.0EEUFC0J682L 100162525550.02250000.807.57.5EEUFC0J682( )100250182024900.02850000.807.57.5EEUFC0J682S( )10025082001631.530100.01850000.807.5EEUFC0J822100100001635.531500.01650000.807.5EEUFC0J103100182527400.02050000.807.57.5EEUFC0J103S( )10025012000164033600.01550000.807.5EEUFC0J123L 1001831.536350.01650000.807.5EEUFC0J12350150001835.536800.01550000.807.5EEUFC0J153502247652.010000.451.55.0 2.5EEAFC1A220( )20020006.310(mm)(mm)(m m )(pcs)(pcs)(µF)(m m )(m m )(mm)(m A )(Ω)(V)(hours)I❉H Lead Space Part No.Specification Dia.LengthTapingCase sizeCap.(±20%)Lead Dia.W.V.Straight Min. P ackaging Q'ty Standard ProductsTaping Taping Ripple current (100kHz)(+105°C)Lead LengthStraight LeadsImped-ance (100kHz)(+20°C)❉B Endur-anceAluminum Electrolytic Capacitors/FC(m m )1039 5 7 120 0.9501000 0.45 2.0 5.0 2.5 EEAFC1A390( ) 200 200047 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC1A470( ) 200 200082 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1A820( ) 200 20006.3 7 200 0.4501000 0.45 2.5 5.0 2.5 EEAFC1A820( ) 200 2000100 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1A101S( )200 20005 15 235 0.50 1000 0.50 2.0 5.0 2.5 EEUFC1A101( ) 200 2000150 6.3 11.2 290 0.3501000 0.50 2.5 5.0 2.5 EEUFC1A151( ) 200 2000180 6.3 11.2 290 0.3501000 0.50 2.5 5.0 2.5 EEUFC1A181( ) 200 2000220 6.3 11.2 290 0.3501000 0.50 2.5 5.0 2.5 EEUFC1A221S( ) 200 20006.3 15 400 0.2501000 0.50 2.5 5.0 2.5 EEUFC1A221( ) 200 2000330 8 11.5 555 0.1172000 0.60 3.5 5.0 EEUFC1A331( ) 200 1000390 8 11.5 555 0.1172000 0.60 3.5 5.0 EEUFC1A391( ) 200 1000470 8 11.5 555 0.1172000 0.60 3.5 5.0 EEUFC1A471( ) 200 1000560 10 12.5 755 0.0903000 0.60 5.0 5.0 EEUFC1A561 200 500680 8 15 730 0.0852000 0.60 3.5 5.0 EEUFC1A681L( ) 200 100010 12.5 755 0.0903000 0.60 5.0 5.0 EEUFC1A681( ) 200 500820 10 16 1050 0.0683000 0.60 5.0 5.0 EEUFC1A821( ) 200 5001000 8 20 995 0.0652000 0.60 3.5 5.0 EEUFC1A102L( ) 200 100010 16 1050 0.0683000 0.60 5.0 5.0 EEUFC1A102( ) 200 5001200 10 20 1220 0.0523000 0.60 5.0 5.0 EEUFC1A122( ) 200 50012.5 15 1205 0.0655000 0.60 5.0 5.0 EEUFC1A122S( ) 200 5001500 10 25 1440 0.0453000 0.60 5.0 5.0 EEUFC1A152( ) 200 5001800 12.5 20 1655 0.0385000 0.60 5.0 5.0 EEUFC1A182( ) 200 50016 15 1690 0.0435000 0.80 7.5 7.5 EEUFC1A182S( ) 100 2502200 10 30 1815 0.0353000 0.60 5.0 EEUFC1A222L 10012.5 20 1655 0.0385000 0.60 5.0 5.0 EEUFC1A222( ) 200 5002700 12.5 25 1945 0.0305000 0.60 5.0 5.0 EEUFC1A272( ) 200 50018 15 2000 0.0385000 0.80 7.5 7.5 EEUFC1A272S( ) 100 2503300 12.5 30 2310 0.0255000 0.80 5.0 EEUFC1A332 10016 20 2205 0.0295000 0.80 7.5 7.5 EEUFC1A332S( ) 100 2503900 12.5 35 2510 0.0225000 0.80 5.0 EEUFC1A392L 10016 20 2205 0.0295000 0.80 7.5 7.5 EEUFC1A392( ) 100 2504700 12.5 40 2655 0.0185000 0.80 5.0 EEUFC1A472L 10016 25 2555 0.0225000 0.80 7.5 7.5 EEUFC1A472( ) 100 2505600 16 25 2555 0.0225000 0.80 7.5 7.5 EEUFC1A562( ) 100 25018 20 2490 0.0285000 0.80 7.5 7.5 EEUFC1A562S( ) 100 2506800 16 31.5 3010 0.0185000 0.80 7.5 EEUFC1A682 10018 25 2740 0.0205000 0.80 7.5 7.5 EEUFC1A682S( ) 100 2508200 16 35.5 3150 0.0165000 0.80 7.5 EEUFC1A822L 10018 31.5 3635 0.0165000 0.80 7.5 EEUFC1A822 5010000 18 35.5 3680 0.0155000 0.80 7.5 EEUFC1A103 5012000 18 40 3735 0.0145000 0.80 7.5 EEUFC1A123 50(m m )(m m ) (m m ) (pcs) (pcs)(µF) (m m ) (m m )(m A ) (Ω)(V) (hours)∗B ∗H Lead Space Dia.Length Taping Lead Dia.W.V.Straight Taping Taping Ripple current (100kHz)(+105ûC)Straight Leads L i f e Time Imped-ance (100kHz)(+20ûC)sPart No.Specification Case size Min. Packaging Q'ty Standard ProductsLead Length Cap.(±20%)When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm.H=2.5mm.The taping dimentions are explained on p.25 of our Catalog. Please use it as a reference guide.154765 2.010000.45 1.5 5.0 2.5EEAFC1C150( )200200027571200.95010000.45 2.0 5.0 2.5EEAFC1C270( )200200039411120 1.3010000.45 1.5 5.0 2.5EEUFC1C390( )2002000475111750.8010000.50 2.0 5.0 2.5EEUFC1C470( )2002000565111750.8010000.50 2.0 5.0 2.5EEUFC1C560( )20020006.372000.45010000.45 2.5 5.0 2.5EEAFC1C560( )2002000685111750.8010000.50 2.0 5.0 2.5EEUFC1C680( )2002000825152350.5010000.50 2.0 5.0 2.5EEUFC1C820( )2002000100 6.311.22900.35010000.50 2.5 5.0 2.5EEUFC1C101( )2002000120 6.311.22900.35010000.50 2.5 5.0 2.5EEUFC1C121( )2002000180 6.3154000.25010000.50 2.5 5.0 2.5EEUFC1C181( )2002000220811.55550.11720000.60 3.5 5.0EEUFC1C221( )2001000270811.55550.11720000.60 3.5 5.0EEUFC1C271( )2001000330811.55550.11720000.60 3.5 5.0EEUFC1C331( )20010003901012.57550.09030000.60 5.0 5.0EEUFC1C391( )2005004708157300.08520000.60 3.5 5.0EEUFC1C471L( )20010001012.57550.09030000.60 5.0 5.0EEUFC1C471( )200500560101610500.06830000.60 5.0 5.0EEUFC1C561( )2005006808209950.06520000.60 3.5 5.0EEUFC1C681L( )2001000101610500.06830000.60 5.0 5.0EEUFC1C681( )200500820102012200.05230000.60 5.0 5.0EEUFC1C821( )20050012.51512050.06550000.60 5.0 5.0EEUFC1C821S( )2005001000102012200.05230000.60 5.0 5.0EEUFC1C102S( )200500102514400.04530000.60 5.0 5.0EEUFC1C102( )2005001200102514400.04530000.60 5.0 5.0EEUFC1C122( )200500161516900.04350000.807.57.5EEUFC1C122S( )1002501500103018150.03530000.60 5.0EEUFC1C152L 10012.52016550.03850000.60 5.0 5.0EEUFC1C152( )200500161516900.04350000.807.57.5EEUFC1C152S( )100250180012.52519450.03050000.60 5.0 5.0EEUFC1C182( )200500181520000.03850000.807.57.5EEUFC1C182S( )100250220012.52519450.03050000.60 5.0 5.0EEUFC1C222( )200500162022050.02950000.807.57.5EEUFC1C222S( )100250270012.53023100.02550000.80 5.0EEUFC1C272L 100162022050.02950000.807.57.5EEUFC1C272( )100250330012.53525100.02250000.80 5.0EEUFC1C332100182024900.02850000.807.57.5EEUFC1C332S( )1002503900162525550.02250000.807.57.5EEUFC1C392( ) 100 250182024900.02850000.80 7.57.5EEUFC1C392S 10025047001631.530100.01850000.807.5EEUFC1C472100182527400.02050000.807.57.5EEUFC1C472S( )10025056001635.531500.01650000.807.5EEUFC1C562L 1001831.536350.01650000.807.5EEUFC1C5625016(mm)(mm)(m m )(pcs)(pcs)(µF)(m m )(m m )(mm)(m A )(Ω)(V)(hours)❉H Lead Space Part No.SpecificationDia.LengthTapingCase sizeCap.(±20%)Lead Dia.W.V.Straight Min. Packaging Q'ty Taping Taping Ripple current (100kHz)(+105°C)Lead LengthStraight LeadsImped-ance (100kHz)(+20°C)❉BEndur-ance6800164033600.01550000.807.5EEUFC1C68210082001835.536800.01550000.807.5EEUFC1C82250104765 2.010000.45 1.5 5.0 2.5EEAFC1E100( )200200022571200.95010000.45 2.0 5.0 2.5EEAFC1E220( )200200027411120 1.3010000.45 1.5 5.0 2.5EEUFC1E270( )2002000395111750.8010000.50 2.0 5.0 2.5EEUFC1E390( )20020006.372000.45010000.45 2.5 5.0 2.5EEAFC1E390( )2002000475111750.8010000.50 2.0 5.0 2.5EEUFC1E470( )2002000565152350.5010000.50 2.0 5.0 2.5EEUFC1E560( )200200082 6.311.22900.35010000.50 2.5 5.0 2.5EEUFC1C820( )2002000100 6.311.22900.35010000.50 2.5 5.0 2.5EEUFC1E101S( )2002000120 6.3154000.25010000.50 2.5 5.0 2.5EEUFC1E121( )2002000180811.55550.11720000.60 3.5 5.0EEUFC1E181( )2001000220811.55550.11720000.60 3.5 5.0EEUFC1E221( )20010002701012.57550.09030000.60 5.0 5.0EEUFC1E271( )2005003308157300.08520000.60 3.5 5.0EEUFC1E331L( )20010001012.57550.09030000.60 5.0 5.0EEUFC1E331( )200500390101610500.06830000.60 5.0 5.0EEUFC1E391( )2005004708209950.06520000.60 3.5 5.0EEUFC1E471L( )2001000101610500.06830000.60 5.0 5.0EEUFC1E471( )200500560102012200.05230000.60 5.0 5.0EEUFC1E561( )20050012.51512050.06550000.60 5.0 5.0EEUFC1E561S( )200500680102012200.05230000.60 5.0 5.0EEUFC1E681( )200500820102514400.04530000.60 5.0 5.0EEUFC1E821( )20050012.52016550.03850000.60 5.0 5.0EEUFC1E821S( )2005001000103018150.03530000.60 5.0EEUFC1E102L 10012.52016550.03850000.60 5.0 5.0EEUFC1E102( )200500161516900.04350000.807.57.5EEUFC1E102S( )100250120012.52519450.03050000.60 5.0 5.0EEUFC1E122( )200500181520000.03850000.807.57.5EEUFC1E122S( )100250150012.52519450.03050000.60 5.0 5.0EEUFC1E152( )200500162022050.02950000.807.57.5EEUFC1E152S( )100250180012.53023100.02550000.80 5.0EEUFC1E182L 100162022050.02950000.807.57.5EEUFC1E182( )100250220012.53525100.02250000.80 5.0EEUFC1E222100182024900.02850000.807.57.5EEUFC1E222S( )1002502700162525550.02250000.807.57.5EEUFC1E272( )10025033001631.530100.01850000.807.5EEUFC1E332100182527400.02050000.807.57.5EEUFC1E332S( )10025039001635.531500.01650000.807.5EEUFC1E392L 1001831.536350.01650000.807.5EEUFC1E3925047001835.536800.01550000.807.5EEUFC1E472505600184037350.01450000.807.5EEUFC1E562502516(mm)(mm)(m m )(pcs)(pcs)(µF)(m m )(m m )(mm)(m A )(Ω)(V)(hours)Lead Space Part No.SpecificationDia.LengthTapingCase sizeCap.(±20%)Lead Dia.W.V.Straight Min. Packaging Q'ty Taping Taping Ripple current (100kHz)(+105°C)Lead LengthStraight LeadsImped-ance (100kHz)(+20°C)❉B ❉HEndur-ance6.84765 2.00010000.45 1.5 5.0 2.5EEAFC1V6R8( )200200012571200.95010000.45 2.0 5.0 2.5EEAFC1V120( )200200018411120 1.30010000.45 1.5 5.0 2.5EEUFC1V180( )2002000225111750.80010000.50 2.0 5.0 2.5EEUFC1V220( )2002000275111750.80010000.50 2.0 5.0 2.5EEUFC1V270( )20020006.372000.45010000.45 2.5 5.0 2.5EEAFC1V270( )2002000335111750.08010000.50 2.0 5.0 2.5EEUFC1V330( )2002000395152350.50010000.50 2.0 5.0 2.5EEUFC1V390( )200200047 6.311.22900.35010000.50 2.5 5.0 2.5EEUFC1V470( )200200056 6.311.22900.35010000.50 2.5 5.0 2.5EEUFC1V560( )200200068 6.311.22900.35010000.50 2.5 5.0 2.5EEUFC1V680( )200200082 6.3154000.25010000.50 2.5 5.0 2.5EEUFC1V820( )2002000100811.55550.11720000.60 3.5 5.0EEUFC1V101( )2001000120811.55550.11720000.60 3.5 5.0EEUFC1V121( )2001000150811.55550.11720000.60 3.5 5.0EEUFC1V151( )20010001801012.57550.09030000.60 5.0 5.0EEUFC1V181( )2005002208157300.08520000.60 3.5 5.0EEUFC1V221L( )20010001012.57550.09030000.60 5.0 5.0EEUFC1V221( )200500270101610500.06830000.60 5.0 5.0EEUFC1V271( )2005003308209950.06520000.60 3.5 5.0EEUFC1V331L( )2001000101610500.06830000.60 5.0 5.0EEUFC1V331( )200500390102012200.05230000.60 5.0 5.0EEUFC1V391( )20050012.51512050.06550000.60 5.0 5.0EEUFC1V391S( )200500470102012200.05230000.60 5.0 5.0EEUFC1V471( )200500560102514400.04530000.60 5.0 5.0EEUFC1V561( )20050012.52016550.03850000.60 5.0 5.0EEUFC1V561S( )200500680103018150.03530000.60 5.0EEUFC1V681L 10012.52016550.03850000.60 5.0 5.0EEUFC1V681( )200500161516900.04350000.807.57.5EEUFC1V681S( )10025082012.52519450.03050000.60 5.0 5.0EEUFC1V821L( )200500181520000.03850000.807.57.5EEUFC1V821( )100250100012.52519450.03050000.60 5.0 5.0EEUFC1V102( )200500162022050.02950000.807.57.5EEUFC1V102S( )100250120012.53023100.02550000.80 5.0EEUFC1V122L 100162022050.02950000.807.57.5EEUFC1V122( )100250150012.53525100.02250000.80 5.0EEUFC1V152L 100162525550.02250000.807.57.5EEUFC1V152( )100250182024900.02850000.807.57.5EEUFC1V152S( )100250180012.54026550.01850000.80 5.0EEUFC1V182L 100162525550.02250000.807.57.5EEUFC1V182( )100250182024900.02850000.807.57.5EEUFC1V182S( )10025022001631.530100.01850000.807.5EEUFC1V222100182527400.02050000.807.57.5EEUFC1V222S( )10025035(mm)(mm)(m m )(pcs)(pcs)(µF)(m m )(m m )(mm)(m A )(Ω)(V)(hours)Lead Space Part No.SpecificationDia.LengthTapingCase sizeCap.(±20%)Lead Dia.W.V.Straight Min. Packaging Q'ty Taping Taping Ripple current (100kHz)(+105°C)Lead LengthStraight LeadsImped-ance (100kHz)(+20°C)❉B ❉H Endur-ance27001635.531500.01650000.807.5EEUFC1V272L 100351831.536350.01650000.807.5EEUFC1V2725033001835.536800.01550000.807.5EEUFC1V332503900184037350.01450000.807.5EEUFC1V39250 1.051120 2.4010000.50 2.0 5.0 2.5EEUFC1H1R0( )20020002.251145 1.3010000.50 2.0 5.0 2.5EEUFC1H2R2( )20020003.351165 1.3010000.50 2.0 5.0 2.5EEUFC1H3R3( )20020004.751195 1.3010000.50 2.0 5.0 2.5EEUFC1H4R7( )20020001041190 2.5010000.45 1.5 5.0 2.5EEUFC1H100( )2002000511125 1.3010000.50 2.0 5.0 2.5EEUFC1H100L( )200200012511135 1.3010000.50 2.0 5.0 2.5EEUFC1H120( )200200015511145 1.3010000.50 2.0 5.0 2.5EEUFC1H150( )200200018511155 1.3010000.50 2.0 5.0 2.5EEUFC1H180( )200200022511155 1.3010000.50 2.0 5.0 2.5EEUFC1H220( )2002000275152150.9010000.50 2.0 5.0 2.5EEUFC1H270( )200200033 6.311.22600.6010000.50 2.5 5.0 2.5EEUFC1H330( )200200039 6.311.22600.6010000.50 2.5 5.0 2.5EEUFC1H390( )200200047 6.311.22600.6010000.50 2.5 5.0 2.5EEUFC1H470( )200200056 6.3153600.4010000.50 2.5 5.0 2.5EEUFC1H560( )200200068811.54850.23420000.60 3.5 5.0EEUFC1H680( )200100082811.54850.23420000.60 3.5 5.0EEUFC1H820( )20010001001012.56150.16230000.60 5.0 5.0EEUFC1H101( )2005001208156350.15520000.60 3.5 5.0EEUFC1H121L( )20010001012.56150.16230000.60 5.0 5.0EEUFC1H121( )20050015010168500.11930000.6 5.0 5.0EEUFC1H151( )2005001808208600.12020000.60 3.5 5.0EEUFC1H181L( )200100010168500.11930000.60 5.0 5.0EEUFC1H181( )200500220102010300.09030000.60 5.0 5.0EEUFC1H221( )20050012.51511500.11050000.60 5.0 5.0EEUFC1H221S( )200500270102512000.08230000.60 5.0 5.0EEUFC1H271( )200500330103016100.06030000.60 5.0EEUFC1H331L 10012.52014800.06350000.60 5.0 5.0EEUFC1H331( )20050039012.52014800.06350000.60 5.0 5.0EEUFC1H391( )200500161516100.08050000.807.57.5EEUFC1H391S( )100250470103016100.06030000.60 5.0EEUFC1H471L 10012.52518320.05050000.60 5.0 5.0EEUFC1H471( )20050056012.52518320.05050000.60 5.0 5.0EEUFC1H561( )200500181519000.06850000.807.57.5EEUFC1H561S( )10025068012.53022150.04050000.80 5.0EEUFC1H681L 100162018350.04850000.807.57.5EEUFC1H681( )10025082012.53522850.03450000.80 5.0EEUFC1H821L 100182024200.04250000.807.57.5EEUFC1H821( )100250100012.54025900.03050000.80 5.0EEUFC1H102L10050(mm)(mm)(m m )(pcs)(pcs)(µF)(m m )(m m )(mm)(m A )(Ω)(V)(hours)Lead Space Part No.SpecificationDia.Length TapingCase sizeCap.(±20%)Lead Dia.W.V.Straight Min. Packaging Q'ty Taping Taping Ripple current (100kHz)(+105°C)Lead Length Straight LeadsImped-ance (100kHz)(+20°C)❉B ❉H Endur-ance6312001631.527000.02850000.807.5EEUFC1H122100182526100.02950000.807.57.5EEUFC1H122S( )10025015001635.527900.02550000.807.5EEUFC1H152L 1001800164028450.02350000.807.5EEUFC1H182L 1001831.530000.02550000.807.5EEUFC1H1825022001835.531000.02350000.807.5EEUFC1H22250 6.8 41180 3.5010000.45 1.5 5.0 2.5EEUFC1J6R8( )200200012511145 2.010000.50 2.0 5.0 2.5EEUFC1J120( )200200018515200 1.3010000.50 2.0 5.0 2.5EEUFC1J180( )200200022 6.311.2240 1.010000.50 2.5 5.0 2.5EEUFC1J220( )200200033 6.311.2240 1.010000.50 2.5 5.0 2.5EEUFC1J330( )200200039 6.3153300.7010000.50 2.5 5.0 2.5EEUFC1J390( )200200047811.54050.34220000.60 3.5 5.0EEUFC1J470( )200100056811.54050.34220000.60 3.5 5.0EEUFC1J560( )200100068811.54050.34220000.60 3.5 5.0EEUFC1J680( )2001000821012.55350.25630000.60 5.0 5.0EEUFC1J820( )2005001008155350.23020000.60 3.5 5.0EEUFC1J101L( )20010001012.55350.25630000.60 5.0 5.0EEUFC1J101( )20050012010166000.19430000.60 5.0 5.0EEUFC1J121( )2005001508206900.17820000.60 3.5 5.0EEUFC1J151( )200100018010208850.14730000.60 5.0 5.0EEUFC1J181( )20050012.51510200.15050000.60 5.0 5.0EEUFC1J181S( )20050022010208850.14730000.60 5.0 5.0EEUFC1J221X( )200500102510500.13030000.60 5.0 5.0EEUFC1J221( )20050012.52012850.08550000.60 5.0 5.0EEUFC1J221S( )200500270161514100.09050000.807.57.5EEUFC1J271( )100250330103013000.09030000.60 5.0EEUFC1J331L 10012.52012850.08550000.60 5.0 5.0EEUFC1J331( )20050039012.52517200.07050000.60 5.0 5.0EEUFC1J391( )200500181516900.08650000.807.57.5EEUFC1J391S( )10025047012.53020900.05550000.80 5.0EEUFC1J471L 100162017650.05950000.807.57.5EEUFC1J471( )100250560162521600.05050000.807.57.5EEUFC1J561( )10025068012.53522650.04750000.80 5.0EEUFC1J681L 100162521600.05050000.807.57.5EEUFC1J681( )100250182022900.05550000.807.57.5EEUFC1J681S( )10025082012.54025600.04250000.80 5.0EEUFC1J821L 1001631.526700.04350000.807.5EEUFC1J821100182525850.04350000.807.57.5EEUFC1J821S( )10025010001631.526700.04350000.807.5EEUFC1J102U 1001635.527700.03650000.807.5EEUFC1J1021001200164028250.03050000.807.5EEUFC1J122L 1001831.529500.03250000.807.5EEUFC1J1225015001835.530950.03050000.807.5EEUFC1J1525050(mm)(mm)(m m )(pcs)(pcs)(µF)(m m )(m m )(mm)(m A )(Ω)(V)(hours)Lead Space Part No.Specification Dia.LengthTapingCase sizeCap.(±20%)Lead Dia.W.V.Straight Min. Packaging Q'ty Taping Taping Ripple current (100kHz)(+105°C)Lead LengthStraight LeadsImped-ance (100kHz)(+20°C)❉B ❉H Endur-anceDesign and specifi cations are subject to change without notice. Ask factory for technical specifi cations before purchase and/or use.Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation.。