RGT60TS65D_Datasheet运用参数

合集下载

佰赛特六五英寸UHD显示屏综为特伏特参考手册说明书

Philips Signage Solutions D-Line Display65"UHD (3840 x 2160)500cd/m²65BDL4510DSay moreSmart, fast 24/7 display.Make it stand out with a fast D-Line professional 4K UHD display. Philips’ superb picture quality ensures true colours and intense contrast. You can effortlessly display content from multiple sources on a single screen.Effortless setup. Total control.•Operate, monitor and maintain with CMND & Control •Schedule what you want, when you want with SmartPlayer Cost-effective system solution•FailOver ensures content is always playing •Energy-saving automatic backlight control Brilliant picture. Blazing processor speed.•4K UHD. Rich, deep images. Stunning contrast •ADS wide-view panel display•Place in landscape or portrait orientation Operational flexibility•SmartPower for energy savingHighlightsCMND & ControlRun your display network over a local (LAN) connection. CMND & Control allows you to perform vital functions like controlling inputs and monitoring display status. Whether you're in charge of one screen or 100.FailOverFrom waiting room to meeting room, never show a blank screen. FailOver lets your Philips Professional Display switch automatically between primary and secondary inputs ensuring content keeps playing even if theprimary source goes down. Simply set a list of alternate inputs to be sure your business is always on.ADS wide-view panel displayBe seen from any angle with ADS wide-view technology. Advanced Super Dimension Switch delivers faster on-display pictureprocessing for smoother content transitions, remarkable image accuracy, and superior colour reproduction with 180 degree viewing.SmartPowerThe backlight intensity can be controlled and pre-set by the system to reduce the powerconsumption by up to 50%, which saves substantially on energy costs.SmartPlayerTurn your USB into a true cost effective digital signage device. Simply save your content(video, audio, pictures) on your USB and plug into your display.Create your playlist and schedule your content via the on screen menu, and enjoy your own created playlists anytime, anywhere.Issue date 2022-07-14Version: 1.0.112 NC: 8670 001 68869EAN: 87 12581 76899 7© 2022 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.SpecificationsPicture/Display•Diagonal screen size: 64.5 inch / 163.8 cm •Panel resolution: 3840 x 2160•Optimum resolution: 3840 x 2160 @60Hz •Brightness: 500 cd/m²•Contrast ratio (typical): 1200:1•Aspect ratio: 16:9•Response time (typical): 8 ms •Pixel pitch: 0.372 x 0.372 mm •Display colors: 1.07 Billion•Viewing angle (H / V): 178 / 178 degree •Dynamic contrast ratio: 500,000:1•Panel technology: ADS•Picture enhancement: 3/2 - 2/2 motion pull down, 3D Combfilter, 3D MA deinterlacing, Dynamic contrast enhancement, Motion compens. deinterlacing, Progressive scanConnectivity•Video input: HDMI 2.0 (x3), Display Port1.2 (x1), DVI-I (x 1), USB 2.0 (x2)•Video output: DisplayPort 1.2 (x1), HDMI 2.0 (x1)•Audio input: 3.5 mm jack •Audio output: 3.5mm jack •Other connections: OPS•External control: RJ45, RS232C (in/out) 2.5 mm jack, IR (in/out) 3.5 mm jack Supported Display Resolution•Computer formats Resolution Refresh rate 1920 x 1080 60Hz 1680 x 1050 60Hz 1600 x 900 60Hz 1024 x 768 60Hz1280 x 102460Hz 1280 x 72060Hz 1440 x 900 60 Hz 3840 x 2160 30, 60Hz 640 x 480 60Hz 800 x 600 60Hz •Video formatsResolutionRefresh rate 1080i 50, 60Hz 576p 50Hz 576i 50Hz 480p 60Hz 480i 60Hz 1080p 50, 60Hz2160p 24, 30, 60Hz 720p 50,60 Hz Dimensions •Set dimensions (W x H x D):1462.3 x 837.3 x 68.9 (@Wall mount)/ 89.9 (@Handle) mm•Set dimensions in inch (W x H x D):57.57 x 32.96 x 2.71 inch(wall mount)/3.54 (@Handle) inch•Bezel width: 14.9 mm (Even bezel)•Product weight (lb): 61.29 lb •Product weight: 27.8 kg•Wall Mount: 400 (H) x 400(V) mm, M6Convenience•Placement: Landscape (24/7), Portrait (24/7)•Keyboard control: Hidden, Lockable•Signal loop through: IR Loopthrough, DisplayPort, HDMI, RS232•Network controllable: RJ45, RS232•Screen saving functions: Pixel Shift, Low Bright •Energy saving functions: Smart PowerPower•Standby power consumption: <0.5 W •Mains power: 100 ~ 240 VAC, 50 ~ 60 Hz •Consumption (Typical): 135 W •Consumption (Max): 290 W •Energy Label Class: GOperating conditions•Temperature range (operation): 0 ~ 40 °C •Temperature range (storage): -20 ~ 60 °C •Altitude: 0 ~ 3000 m •MTBF: 50,000 hour(s)•Humidity range (operation)[RH]: 20 ~ 80% (without condensation)•Humidity range (storage) [RH]: 5 ~ 95% (without condensation)Sound•Built-in speakers: 2 x 10W RMSAccessories•Included accessories: AC Power Cord, RS232 cable, Quick start guide, IR sensor cable (1.8M), Remote Control & AAA Batteries•Included Accessories: Philips logo (x1), AC SwitchCover, RS232 daisy-chain cable, Screws, USB Cover (x1)Multimedia Applications•USB Playback Audio: AAC, HEAAC, MPEG •USB Playback Picture: BMP, JPEG, PNG•USB Playback Video: MPEG, H.263, H.264, H.265, VP8Miscellaneous•On-Screen Display Languages: English, French, German, Spanish, Polish, Turkish, Russian, Italian, Simplified Chinese, Traditional Chinese, Arabic, Japanese, Danish, Dutch, Finnish, Norwegian, Portuguese, Swedish•Regulatory approvals: CB, CE, BSMI, CCC, CU, EMF, FCC, Class A, PSB, RoHS, VCCI, EnergyStar 8.0, ETL•Warranty: 3 year warranty。

美国AEMC公司高端和可移动数字弱电阻抗度计6550和6555产品说明书

Technical Assistance (800) 343-1391 110kV and 15kV DigitalMegohmmetersModels 6550 & 6555► Insulation measurementup to 30T Ω► Test voltages up to 15,000V► Step, ramp & fixed voltagetesting► Multiple test modes: voltageramp and step with “Burn-In”, “Early-Break” and “I-Limit” modes► 3 filter choices to optimize measurement stability► Selectable voltage from40V to 10,000 / 15,000V ► Storage of up to 80,000 measurements► Optically-isolated USBcommunication for data transfer to PC and report generation using DataView ® softwareExpert tools for testing insulation safely & accuratelyIP 54Our products are backed by over 130 years of experience in test and measurement equipment, and encompass the latest international standards for quality and safety.Technical Hotline: (800) 343-13912 Technical Assistance (800) 343-1391Models 6550 & 6555HIGH-END & PORTABLEThe Megohmmeter Models 6550 and 6555 are high-end portable instruments intended for measuring a wide variety of electrical insulation resistance values oncables and devices operating at high voltage. They are packaged in a rugged case that is IP54 rated (cover closed). Test results and configuration information is provided on a graphical LCD screen, as well as exportable throughthe use of the DataView ® software provided. TheMegohmmeters can operate on battery or AC power while testing.These Megohmmeters contribute to the safety ofelectrical installations and equipment. Their operation is managed by microprocessors that acquire, process, display and store the measurements.The Model 6550 makes insulation measurements at voltages up to 10,000 V , the Model 6555 up to 15,000 V .Main Functions:• Detection and measurement of input voltage, frequency, and current prior to running a test.• Quantitative and qualitative insulation measurements.• Measurements at a fixed test voltage of 500, 1000, 2500, 5000, 10,000 or 15,000 V dc .• Measurements at an adjustable test voltagebetween 40 and 15,000 V dc preselected by the user prior to the test. Three preselected test voltages can be stored in the instrument and can be modified as needed prior to starting a test.IP 54• Ramp voltage measurements with a ramp from 40 to 10,000 V or 15,000 V , model dependent. Three ramp profiles can be stored in the instrument. Each ramp profile includes the starting and ending test voltage and the ramp time between the two.• Step voltage measurements with steps from 40 to 10,000 V or 15,000 V , model dependent.Three step voltage profiles can be stored in the instrument. Each contains up to 10 steps that include test voltage and duration.• Three test current choices: Burn-In, Early-Break and I-Limit provide qualitative analysis tools for detection breaks in insulation.• Quality ratio calculations for DAR, PI, and DD are calculated and displayed.• Temperature correction of the measured resistance to a reference temperature.• Capacitance measurement of the device tested.• Residual current measurement.Model 6555 checking insulation resistance on feed cables to a three-phase motor.Technical Assistance (800) 3►► SELECTABLE VOLTAGE FROM 40V TO 10kV / 15kV MODELSINSULATION TESTSTest VoltageAPPLICATIONS► Acceptance testing and preventive maintenance ► Test motors, cables, switchgears and wiring installations4 Technical Assistance (800) 343-1391CONTROL FEATURESFront Panel Features for Models 6550 & 6555Socket for connection to the ACpower and recharging of thebuilt-in batteriesmeasurementbuttonsUSB connector forcommunicationto a PC Seven position access to the fixed voltage, adjustable voltage,ramp and stepLarge, digital, backlit, Models 6550 and 6555 have the same front panel with differences in the display only .5Measurement Results Display AreaDisplay ofResultsTechnical Assistance (800) 5FUNCTIONSModels 6550 & 65556 Technical Assistance (800) 343-1391bargraphterminalsExample of display during measurement.resistanceresistance referred to the reference temperature.cursor Resistance versus time graph.This curve is useful primarily in the case of a measurement in V-RAMP mode.When Timed Run (test with programmed duration) or Timed Run + DD is selected, the duration of the measurement (m:s) can be set.The number of measurements that can be recorded depends on the number of samples stored for each measurement.quality ofof memory white).indicated.T est with programmed durationExample of display before measurement.FUNCTIONAL DISPLAYSSOFTWARE & ANALYSIS SCREENSEasy identification of all stored test results.Real-time display of measurement results.Step voltage set up screen.Technical Assistance (800) 7ORDERING INFORMATION M egohmmeter Model 6550 Ramp, StepV , Variable, Auto DAR/PI/DD, USB w/DataView Megohmmeter Model 6555 Ramp, StepV , Variable, Auto DAR/PI/DD, USB w/DataView AEMC ® Instruments • 15 Faraday Dr. • Dover, NH 03820 USA • (800) 343-1391•Fax(603)742-2346•E-mail:**************Export Department: +1 (603) 749-6434 x520 • Fax +1(603)742-2346•E-mail:***************© Chauvin Arnoux ®, Inc. d.b.a. AEMC ®Instruments Call the AEMC ® Instruments Technical Assistance Hotline for immediate consultation with an applications engineer: (800) 343-1391950.BR-6550-6555_0323 • Printed in the USA M u lt i-p u r p o s e C la m p -O n M e t e r s ca o tl in M E G O H MM E T E R SFo r a ll of y ou r I ns ul at io n Te st in g ne ed s...ch ni ca l H o tl in e: (800) 343-1391.a em c.co mP O W E R Q U A L I T Y Fo rA ll Y ou r Po w er Q ua li ty N ee ds ...Te 43-1391w w w ( Fo r a ll of yo ur G ro un d In te gr ity T es tin g ne ed s...G R O U N D R E S IS TA N C E T E S TE R S Te ch ni ca l H ot lin e: (800) 343-1391w w w .a em c.co mTEST & MEA SUREM ENT INSTR UMEN TSVOLUM E 23WWW.AEM TECHNICA L HOTLINE : (800) 343-1391Family of ProductsTo learn more, visit 。

XL7035 datasheet-Chinese

1A 150KHz 80V 降压型DC-DC 转换器 XL7035特点10V到80V 宽输入电压范围输出电压从1.25V 到20V 可调最大占空比100% 最小压降1V固定150KHz 开关频率最大1A 输出电流48V 输入、5V 输出推荐最大输出电流1A 48V 输入、15V 输出推荐最大输出电流0.6A内置高压功率三极管效率高达85%出色的线性与负载调整率内置过热关断护功能内置限流功能内置输出短路保护功能 TO263-5L 封装应用电动车控制器供电通信描述XL7035是一款高效、高压降压型DC-DC 转换器，固定150KHz 开关频率，可提供最高1A 输出电流能力，低纹波，出色的线性调整率与负载调整率。

XL7035内置固定频率振荡器与频率补偿电路，简化了电路设计。

PWM控制环路可以调节占空比从0~100%之间线性变化。

内置输出过电流保护功能，当输出短路时，开关频率从150KHz降至45KHz。

内部补偿模块可以减少外围元器件数量。

图1. XL7035封装1A 150KHz 80V降压型DC-DC转换器XL7035引脚配置1A 150KHz 80V降压型DC-DC转换器XL7035用于限制最大输出电流，当豪欧姆；当时，R3选择1A 150KHz 80V降压型DC-DC转换器XL70351A 150KHz 80V降压型DC-DC转换器XL70351A 150KHz 80V降压型DC-DC转换器XL70351A 150KHz 80V降压型DC-DC转换器XL70357. XL703520V~80V, 15V/0.6A)951A 150KHz 80V降压型DC-DC转换器XL7035图9. XL7035(VIN=10V~80V, VOUT=5V/1A)901A 150KHz 80V降压型DC-DC转换器XL70351A 150KHz 80V降压型DC-DC转换器XL7035重要申明XLSEMI保留在任何时间、在没有任何通报的前提下，对所提供的产品和服务进行更正、修改、增强的权利。

联想ThinkPad T460s电源适配器数据表说明书

Vertical
Primary Pins
5
Secondary Pins
2
USE_SHIELDS
NO
LP_nom
574
LP_Tol
5.0
NP
46.0
NSM
7
CMA
1408
BW
15.30
ML
0.00
MR
0.00
FF
69.72
AE ALG BM BP BAC LG L_LKG LSEC
52.50 271 3178 3417 1589 0.206 14.35 20
Feedback Circuit
Var
Value
DUAL_OUTPUT_FB_FLA NO G
NO
PIVB
69
NB
7
Transformer Construction Parype
E25/13/7 (EF25)
Core Material
3F3
Bobbin Reference
Generic, 5 pri. + 5 sec.
Bobbin Orientation
OR_HSINK_AREA OSR_RDSON CO IRIPPLE Expected Lifetime
104 15.00 220 x 1 2.912 24386
mm² mΩ µF A hr
Output Rectifier Heatsink Area Synchronous Rectifier RDSON (Manual Overwrite) Output Capacitor - Capacitance Output Capacitor - RMS Ripple Current Output Capacitor - Expected Lifetime

戴尔易安信PowerEdge VRTX技术规格说明书

Adapt and scale with an expandable, versatile platformThe PowerEdge VRTX was designed for remote-office and small-office environments with ”under your desk” dimensions and quiet acoustics. The PowerEdge VRTX is built on a scalable business architecture so you can continually optimize your capacity and performance with future-proof compute, storage and networking options within a single chassis.• Scale as you grow, with up to four PowerEdge blade servers and 12 x 3.5” or 25 x 2.5” HDD within its compact chassis.• Mix and match the two-socket, half-height PowerEdge M630 and M640 server nodes and four-socket, full-height M830 based on your changing workload requirements.• Easily add more storage by connecting to up to four MD1200 (12 x 3.5” drives) or MD1220 (24 x 2.5” drives) disk arrays in redundant or capacity-based configurations.• Integrate networking through the 10GbE or 1GbE internal switch module or an optional 1Gb Ethernet pass-through module.• Take advantage of flexible, expandable I/O with eight PCIe slots.• Keep operating expenses in check with energy efficient Fresh Air validated configurations and standard powerrequirements.Safeguard data with integrated securityEvery PowerEdge server is made with a cyber-resilient architecture, delivering security into all parts of a server’s life cycle. Dell considers each part of system security, from design to end of life, to ensure trust and deliver worry-free systems.• Maintain data safety with cryptographically signed firmware packages and Secure Boot.1• Prevent unauthorized or malicious change with Server Lockdown.1• Wipe all data from storage media including hard drives, SSDs and system memory quickly and securely with System Erase.1• Add another layer of protection with optional FIPS-certified self-encrypting drives (SED).Enterprise-wide systems managementDell Chassis Management Controller (CMC) lets you manage server nodes, shared storage, networking and power in a single console. Access CMC through an easy-to-use web interface that works with a variety of Dell OpenManage tools including iDRAC with Lifecycle Controller. Choose to manage your VRTX with embedded agent-free management or inband.• Use the OpenManage Mobile app to receive and take action on hardware alerts at the server or from anywhere, at any time.• Streamline management in virtualized environments with OpenManage Integrations for VMware vCenter or Microsoft System Center.• Get rapid, at-a-glance identification of remote system locations and health status with Geoview.1 These features are available via the PowerEdge server. Server Lockdown and System Erase is onlyavailable on M640.2 Meet database performance needs while reducing TCO with the Dell PowerEdge VRTX vs.aleading public cloud service. PowerEdge VRTXDell PowerEdge VRTX integrates servers, storage, networkingand management into a single office-optimized chassis.Increase efficiency by eliminating disparate hardware andmultiple management tools with the scalable and easy-to-manage VRTX platform.Transform your business with a data center under your desk.TCO.2Learn more at /PowerEdgePayment solutions provided and serviced by Dell Financial Services L.L.C. or its affiliate or designee (“DFS”) for qualified customers. Offers may not be available or may vary in certain countries. Where available, offers may be changed without notice and are subject to product availability, credit approval, execution of documentation provided by and acceptable to DFS, and may be subject to minimum transaction size. Offers not available for personal, family or household use. Dell and the Dell logo are trademarks of Dell Inc. Restrictions and additional requirements may apply to transactions with governmental or public entities.© 2017 Dell Inc. or its subsidiaries. All Rights Reserved. Dell, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.。

TPS65166RHAR;中文规格书,Datasheet资料

FEATURESAPPLICATIONSDESCRIPTIONTYPICAL APPLICATIONBoost Converter With HVS Buck Converter Negative Shunt Regulator Inverting Buck BoostWith Temperature Compensation Sequencing And LogicPositive Charge Pump Power GoodV s15V / 2.9AV logic3.3V / 2.4A V ONE28V / 150mAV OFFE-22 to -11V / 200mA V ss-7.5V / 100mA V in12VTPS65166 SLVS976–SEPTEMBER 2009Compact LCD Bias Supply for TFT-LCD TV Panels•LCD TV Panel with ASG Technology•8.5V to 14.7V Input Voltage Range •V S Output Voltage Range up to 19V•Boost Converter with 4.2A Switch CurrentThe TPS65166offers a compact power supply •Step Down Converter with 2.6A Switch Current solution to provide all voltages required by a LCD and Adjustable Output 2.5V to 3.3V panel for large TV panel applications running from a •750kHz Fixed Switching Frequency12V supply rail.The device is optimized to support •Temperature Compensated Negative Supply LCD technology using ASG gate drive circuits.•High Voltage Stress Test (HVS)The device generates all voltage rails for the TFT LCD bias (V S ,V ONE ,V OFFE ,V SS ).In addition to that it •Adjustable Sequencingincludes a step-down converter (V logic )to provide the •Gate Drive Signal for Isolation Switch logic voltage.By pulling the HVS pin high an •Short Circuit Protection implemented high voltage stress test feature •Internal Soft-Startprograms the boost converter output voltage V s to higher values.The boost converter operates at a •180°Phase Shift Between Buck and Boost fixed switching frequency of 750kHz.The positive •P2P Short/Open Certifiedcharge pump is running from the boost converter and •Optimized Dual Layer PCB Layout is regulated by an external transistor.A buck-boost converter provides an adjustable temperature •Low EMIdependent negative output voltage V OFFE .The •Undervoltage Lockout negative output voltage V SS is regulated by a shunt •Thermal Shutdownregulator.•Available in 6×6mm 40Pin QFN PackageSafety features like overvoltage protection of the buck-boost input voltage,the boost and buck output voltage,undervoltage lockout,short circuit protection of V ONE ,V OFFE ,and V logic are included as well as thermal shutdown.Please be aware that an important notice concerning availability,standard warranty,and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.PowerPAD is a trademark of Texas Instruments.PRODUCTION DATA information is current as of publication date.Copyright ©2009,Texas Instruments IncorporatedProducts conform to specifications per the terms of the Texas Instruments standard warranty.Production processing does not necessarily include testing of all parameters.ABSOLUTE MAXIMUM RATINGSDISSIPATION RATINGS (1)RECOMMENDED OPERATING CONDITIONS (1)TPS65166SLVS976–SEPTEMBER These devices have limited built-in ESD protection.The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.ORDERING INFORMATION (1)(2)T AORDERING PACKAGE PACKAGE MARKING–40°C to 85°CTPS65166RHAR6×6mm 40Pin QFNTPS65166(1)For the most current package and ordering information,see the Package Option Addendum at the end of this document,or see the TI website at .(2)The RHA package is available taped and reeled.Add R suffix to the device type (TPS65166RHAR)to order the device taped and reeled.The RHA package has quantities of 3000devices per reel.over operating free-air temperature range (unless otherwise noted)(1)VALUEUNIT Input voltage range AVIN,VIN1,VIN2,VIN3(2)–0.3to 20V Voltage range at SW1,SW2,SW3,SW4,GD,BASE2,RHVS,OS –0.3to 20V Voltage range at EN1,EN2,HVS–0.3to 20V Voltage range at COMP,SS,FB1,VSNS,FB2,FB3,FB4,TS,SET,FB5,DLY1,DLY2,PG –0.3to 7.0V Voltage difference VIN3to SW540V BASE1–9.5to 0.3V ESD rating,Human Body Model 2kV ESD rating,Machine Model 200V ESD rating,Charged Device Model 700V Continuous total power dissipation See Dissipation Rating TableOperating junction temperature range,T J –40to 150°C Operating ambient temperature range,T A –40to 85°C Storage temperature range,T stg –65to 150°C(1)Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device.These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied.Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.(2)All voltage values are with respect to network ground terminal.PACKAGE R θJA T A ≤25°C T A =70°C T A =85°C POWER RATINGPOWER RATINGPOWER RATING40pin QFN35°C/W2.8W1.6W1.1W(1)Soldered Power Pad on a standard 2-Layer PCB without vias for thermal pad.See the Texas Instruments Application report (SLMA002)regarding thermal characteristics of the PowerPAD package.MINTYPMAX UNIT V IN Input voltage range (AVIN,VIN1,VIN2,VIN3)8.514.7V V IN3Overvoltage protection 15V for buck-boost converter 15V T A Operating ambient temperature –4085°C T J Operating junction temperature–40125°C(1)Refer to application section for further information2Submit Documentation FeedbackCopyright ©2009,Texas Instruments IncorporatedProduct Folder Link(s):TPS65166ELECTRICAL CHARACTERISTICS TPS65166 SLVS976–SEPTEMBER2009 AVIN=VIN1=VIN2=VIN3=12V,EN1=EN2=VIN,V S=15V,V logic=3.3V,T A=–40°C to85°C,typical values are at T A=25°C(unless otherwise noted)PARAMETER TEST CONDITIONS MIN TYP MAX UNIT SUPPLY CURRENTV IN Input voltage range8.514.7VI QIN Quiescent current into AVIN,VIN1,2,3Not switching,FB=FB+5% 1.2mAI sd Shutdown current into AVIN,VIN1,2,3EN1=EN2=GND170µAV UVLO Under-voltage lockout threshold V IN falling8.08.2VV UVLO Under-voltage lockout threshold V IN rising8.28.5V Thermal shutdown Temperature rising150°CThermal shutdown hysteresis15°C LOGIC SIGNALS EN1,EN2,HVSV IH High level input voltage V IN=8.5V to14.7V 1.7VV IL Low level input voltage V IN=8.5V to14.7V0.4VI I Input leakage current EN1=EN2=GND0.010.1µA POWER GOODV IL Low level voltage(1)I(sink)=500µA0.3VI lkg Leakage current V PG=5.0V0.010.1µA SEQUENCING DLY1,DLY2,and SOFT-STARTI chrg DLY1,DLY2charge current V threshold=1.24V4 4.9 6.3µAV threshold DLY1,DLY2threshold voltage 1.21 1.24 1.27VR dischrg DLY1,DLY2discharge resistor 3.2kΩI SS Soft-start charge current V threshold=1.24V81012µA SWITCHING FREQUENCYf s Switching frequency600750900kHz BOOST CONVERTER(V s)V s Output voltage range19VV swovp Switch overvoltage protection V s rising19.019.520VV FB1Feedback regulation voltage 1.225 1.24 1.252VI FB1Feedback input bias current V FB1=1.24V10100nAR DS(on)N-MOSFET on-resistance I SW=500mA120170mΩI LIM N-MOSFET switch current limit 4.2 5.2 6.2AI leak Switch leakage current V sw=15V110µAt on Minimum on time80ns Line regulation8.5V≤V IN≤14.7V,I out=1mA0.006%/VLoad regulation1mA≤I out≤2.0A0.1%/A GATE DRIVE(GD)AND BOOST CONVERTER PROTECTIONVGD M V IN–V GD(2)V IN=12V,GD pulled down567VI(GD)Gate drive sink current EN2=high10µAR(GD)Gate drive internal pull up resistance10kΩt on Gate on time during short circuit FB1<100mV 1.4ms BUCK CONVERTER(V logic)V logic Output voltage range 2.2 4.0VFB2connected to resistor divider,V FB2Feedback regulation voltage 1.215 1.24 1.265VI load=10mAI FB2Feedback input bias current V FB2=1.24V10100nAR DS(on)N-MOSFET on-resistance I sw3,I sw4=1.5A150250mΩ(1)PG goes high impedance once V s and V ONE are in regulation.(2)GD goes to V IN–V GD once the boost converter V s is enabled.Copyright©2009,Texas Instruments Incorporated Submit Documentation Feedback3Product Folder Link(s):TPS65166TPS65166SLVS976–ELECTRICAL CHARACTERISTICS(continued)AVIN=VIN1=VIN2=VIN3=12V,EN1=EN2=VIN,V S=15V,V logic=3.3V,T A=–40°C to85°C,typical values are at T A=25°C (unless otherwise noted)PARAMETER TEST CONDITIONS MIN TYP MAX UNIT I LIM N-MOSFET switch current limit 2.6 3.4 4.2AI leak Switch leakage current V sw=0V1µALine regulation8.5V≤V IN≤14.7V,I out=1mA0.006%/V1mA≤I out≤100mA0.042%/mA Load regulation100mA≤I out≤2.5A0.06%/A NEGATIVE SHUNT REGULATOR(V ss)V Base1Base1voltage range Transistor leakage maximum5µA–9.50.3VI Base1Base1drive source current V FB3=V FB3nominal–5%5mA0.75×V FB3Feedback regulation voltage–5%5%VV logicI FB3Feedback input bias current VFB3=1.24V10100nALine regulation8.5V≤V IN≤14.7V,I out=1mA0.006%/VLoad regulation1mA≤I out≤100mA0.0004%/mA NEGATIVE BUCK BOOST CONVERTER(V OFFE)V ovp VIN3overvoltage protection15VV OFFE Adjustable output voltage range–22-5VR DS(on)P-MOSFET on resistance I SW5at current limit0.9 1.6ΩI LIM P-MOSFET current limit 1.1 1.4ARegulation accuracy upper limit V TS=1V,V SET=1.9V 1.8 1.9 2.0VV FB5Regulation accuracy V TS=1V,V SET=2.4V 1.92 2.1V Regulation accuracy lower limit V TS=0.7V,V SET=2.4V 1.57 1.65 1.73VI FB5Feedback input bias current V FB5=2V10100nAI TS TS input bias current V TS=1V10100nAI SET SET input bias current V SET=3V35µALine regulation8.5V≤V IN≤14.7V,I out=1mA0.003%/VLoad regulation1mA≤I out≤200mA,V OFFE=–11V0.0005%/mA POSITIVE CHARGE PUMP(V ONE)Base2drive sink current V FB4=V FB4nominal-5%814mAI Base2Base2drive sink current(SC-Mode)V FB4=GND405070µAV Base2Base drive voltage range20VV FB4Feedback regulation voltage 1.18 1.24 1.30VI FB4Feedback input bias current V FB4=1.24V10100nALine regulation8.5V≤V IN≤14.7V,I out=1mA0.9%/VLoad regulation1mA≤I out≤150mA,V OFFE=–11V0.004%/mA HIGH VOLTAGE STRESS TEST(HVS),RHVSRHVS RHVS pull down resistance HVS=high,I HVS=500µA350450550ΩI RHVS RHVS leakage current HVS=low,V RHVS=5V100nA4Submit Documentation Feedback Copyright©2009,Texas Instruments IncorporatedProduct Folder Link(s):TPS65166DEVICE INFORMATIONPACKAGESW3SW4NC FB2P GD L Y 1E N 1E N 2H V SF B 3SET AGND/VL-NC NC BASE2P G N D 1P G N D 2S W 1S W 2O SS SB A S E 1D L Y 2F B 4SW 5NC NC FB 5TS GD AVIN VIN1VIN2NC C O M PR H V SV I N 3F B 140 Pin 6mm x 6mm QFN(Top View)V L +TPS65166 SLVS976–SEPTEMBER 2009NOTE:The thermally enhance Power Pad is connected to GNDPIN FUNCTIONSPINI/O DESCRIPTIONNAME NO.GD 1I Gate drive pin for the external isolation MOSFET.AVIN 2I Input voltage supply pin for the analog circuit.VIN1,VIN23,4IInput supply for the buck converter generating V logic NC 5Not connectedSW3,SW46,7O Switch pin for the buck converter generating V logic NC 8Not connectedVSNS 9I Reference voltage input for the buck-boost and negative shunt regulator FB210I Feedback pin for the buck converter.PG 11I Power good output latched high when V S and V ONE are in regulation DLY112O Delay pin EN2high to enable boost converter V S EN113I Enable of the buck converter V logicEN214I Enable of the negative supplies V SS and V OFFE ,enable DLY1and DLY2HVS 15I Logic pin to enable high voltage stress test.This allows programming the boost converter V S to ahigher voltageFB316I Feedback of the negative supply V SS SS17O Soft-start for the boost converter V SCopyright ©2009,Texas Instruments IncorporatedSubmit Documentation Feedback5Product Folder Link(s):TPS65166TPS65166SLVS976–PIN FUNCTIONS(continued)PINI/O DESCRIPTIONNAME NO.BASE118O Base drive of the external npn transistor for the negative supply V SSDLY219O Delay pin EN2high to enable charge pump V ONEFB420I Feedback for the positive supply V ONEBASE221I Base drive of the external pnp transistor for the positive charge pump V ONENC22,23Not connectedAGND/VL-24Analog ground and connection of the bypass capacitor of VL-SET25I Input pin for the reference voltage to set the higher limit for the temperature compensation forV OFFETS26I Input pin for the NTC temperature sensorFB527I Feedback pin for the negative buck-boost converter V OFFENC28,29Not connectedSW530O Switch pin for the negative buck-boost converter generating V OFFEVIN331I Input supply for the buck-boost converter generating V OFFERHVS32I This pin is pulled low when HVS is high.The resistor connected to this pin sets the boostconverter output voltage when HVS is pulled highFB133I Feedback for the boost converter V SCOMP34O Compensation pin for the boost converterVL+35O Output of the internal logic regulator.Connect a capacitor between this pin and AGND/VL-OS36I Connect this pin to the boost converter output for overvoltage protectionSW1,SW237,38I Switch pin for the boost converter and the positive charge pump V ONEPGND1,39,40Power ground for the boost converter V SPGND26Submit Documentation Feedback Copyright©2009,Texas Instruments IncorporatedProduct Folder Link(s):TPS65166TPS65166 SLVS976–SEPTEMBER2009Functional Block DiagramCopyright©2009,Texas Instruments Incorporated Submit Documentation Feedback7Product Folder Link(s):TPS65166TPS65166SLVS976–8Submit Documentation Feedback Copyright©2009,Texas Instruments IncorporatedProduct Folder Link(s):TPS65166TYPICAL CHARACTERISTICS TABLE OF GRAPHS TPS65166 SLVS976–SEPTEMBER2009Copyright©2009,Texas Instruments Incorporated Submit Documentation Feedback9Product Folder Link(s):TPS65166TPS65166SLVS976–Figure1.Figure2.Figure3.Figure4.10Submit Documentation Feedback Copyright©2009,Texas Instruments IncorporatedProduct Folder Link(s):TPS65166分销商库存信息: TITPS65166RHAR。

DMM6500和DAQ6510数字多功能表选择指南说明书

DIGITAL MULTIMETER SELECTOR GUIDEDMM6500 6½-DIGIT BENCH/ SYSTEM DIGITAL MULTIMETERThe DMM6500 offers more measurement capability – including transient capture, data visualization, and analysis – at a great price.• 15 built-in measurement functions and increased sensitivity for a wider range of measurements • Analyze graphs and trends directly on the touchscreen display for faster measurement insightsDAQ6510 DATA ACQUISITION AND LOGGING MULTIMETER SYSTEMCreating a new level of simplicity, the DAQ6510touchscreen user interface enables faster setup time, real time monitoring of test status, and detailed data analysis on the instrument.• Set up, execute and monitor, and analyze multi-channel measurements quicklyT ouch, T est, Invent ®Combining touchscreen productivity with 15 measurement functions, greater sensitivity, and moreconnectivityAnalyze complex waveforms with the touchscreen display.Set up AnalyzeMonitorSEE PAGE 6SEE PAGE 11• Built-in 6½-digit DMM for high performance measurementsDIGITAL MULTIMETER SELECTOR GUIDE Keithley has a wide selection of yourmost important measurement instrument.Keithley has a wide selection of your most important measurement instrument (3)Standard Performance for the Most Essential NeedsDMM4020 5½-Digit Digital Multimeter (4)2110 5½-Digit Dual-Display Digital Multimeter (4)2100 6½-Digit USB Digital Multimeter (5)DMM4040 and DMM4050 6½-Digit Digital Multimeters (5)2000 6½-Digit Digital Multimeter (5)Enhanced Performance with a Touchscreen Graphical User InterfaceDMM6500 6½-Digit Bench/System Digital Multimeter (6)No Compromise: High Speed and High AccuracyDMM7510 7½-Digit Graphical Sampling Multimeter (7)Save Rack Space and Double Test Capacity in ManufacturingDMM7512 Dual Channel 7½-Digit Sampling Multimeter (8)High Accuracy with High Resolution2010 Low Noise 7½-Digit Autoranging Multimeter (9)2001 7½-Digit High Performance Multimeter (9)2002 8½-Digit High Performance Multimeter (9)Precision Multi-Channel Measurements for Data Acquisition2700 and 2701 Multimeter/Data Acquisition/Switch Systems (10)2750 Multimeter/Switch System (10)DAQ6510 Data Acquisition and Logging, Multimeter System (11)High Channel Count and Precision Measurement Data Acquisition Systems3706A System Switch/Multimeter (12)Appendix 1: Plug-in Scanner Card Options for the DMM6500, 2000, 2001, 2010,and 2002 Digital Multimeters (13)Appendix 2: Plug-in Switch Modules for the 2700 Series and DAQ6510Data Acquisition Systems (14)Appendix 3: Plug-in Switch Modules for the 3706A System Switch/Multimeter (15)DMM Comparison Table (16) | 34 | DIGITAL MULTIMETER SELECTOR GUIDESTANDARD PERFORMANCE FOR THE MOST ESSENTIAL NEEDSDMM4020 5½-Digit Digital Multimeter• Perform pass/fail testing with the Limit Compare Mode • Measure low currents with 1 nA sensitivity • Measure True RMS AC + DC signals • Interface to a PC with the RS-232-to-USB Interface Adapter cable2110 5½-Digit Dual-Display Digital Multimeter• Measure and display two parameters concurrently • Sample a signal at 50,000 readings/s • Measure temperature and capacitance • Interface to a PC or a system with the USBinterface or the optional GPIB interfaceEfficiently conduct laboratory exercises in student labs with Tek SmartLab™ Software and instrumentation including the 2110 DMM. | 5DIGITAL MULTIMETER SELECTOR GUIDE2100 6½-Digit USB Digital Multimeter• Connect to either the front terminals or the rear terminals • Measure any parameter with fully-specified accuracies • Interface to a PC with the USB-TMC compliant protocolDMM4040 and DMM4050 6½-Digit Digital Multimeters• Plot signals with the TrendPlot™ Data Recorder Mode • Statistically analyze data with the Histogram mode• Automate measurements with the LAN interface, GPIB interface, RS-232 interface, or to USB with the RS-232-to-USB Interface Adapter Cable • Increase measurement accuracy by up to a factor of 2 with the DMM4050STANDARD PERFORMANCE WITH ADDITIONAL MEASUREMENT CHANNELS2000 6½-Digit Digital Multimeter• Increase production throughput with 2000 measurements/s • Read up to 10 channels with optionalthermocouple and voltage/resistance plug-in scanner cards • Connect to a PC with GPIB and RS-232Interfaces6 | DIGITAL MULTIMETER SELECTOR GUIDEUse the optional scanner cards to increasemeasurement capability for voltage measurements from 10 different channels or for temperature measurements from 9 different thermocouples.Use the optional TSP-Link interface and TSP (Test Script Processor) scripts to control test sequences and to control other instruments with the DMM6500. Save test time with minimal communication with the PC and achieve low-latency synchronization between instruments.ENHANCED PERFORMANCE WITH A TOUCHSCREEN GRAPHICAL USER INTERFACEDMM6500 6½-Digit Bench/System Digital Multimeter• Capture complex signals and transients with up to 1 Msample/s 16-bit digitizing • Make low level measurements with 100 nV, 10 pA, and 1 µΩ sensitivities • Measure with superior 0.0025% basic, 1-year, DC Volt accuracy and 0.0075% basic, 1-year resistance accuracy • Analyze data and display waveform plots on the 5 inch (12.7 cm) touchscreen display • Measure power circuit current up to 10 A• Interface to a PC with LAN/LXI andUSB-TMC interfaces or optional GPIB or RS-232 interfaces• Test up to 10 DUTs in one test setup with the optional plug-in scanner cardsAnalyze complex waveforms with thetouchscreen display. | 7DIGITAL MULTIMETER SELECTOR GUIDENO COMPROMISE: HIGH SPEED AND HIGH ACCURACYDMM7510 7½-Digit Graphical Sampling Multimeter•Capture IoT wireless device load current transmit bursts wit 18-bit,1Msample/s digitizing • Measure ultra-low sleep mode currents on processors and products with 1 pA current sensitivity • Hold DUTs to tight test tolerances using voltage measurements with accuracies as low as 14 ppm• Store up to 27.5 million readings forprofiling load current waveforms and transient waveforms• Take measurements as fast as 26,000 readings/s for high throughput testing• Get fast insight into waveform characteristics with the 5 inch (12.7 cm) touchscreen display • Execute custom test scripts and control other instruments with the built-in test script processing language • Interface to a PC with either LXI LAN, USB, or GPIB interfacesDMM75102281S-20-6Battery SimulatorUse the high resolution and the wide dynamic range of the DMM7510 to capture the current draw during all the operating states (sleep mode, standby mode, and transmit mode) of an IoT device.Learn more about the DMM75108 | DIGITAL MULTIMETER SELECTOR GUIDESAVE RACK SPACE AND DOUBLE TEST CAPACITY IN MANUFACTURINGDMM7512 Dual Channel 7½-Digit Sampling Multimeter• Double measurement performance with two independent, identical 3½- to 7½-digit DMMs similar to the DMM7510 in a 1U high, full rack width chassis • Capture waveforms such as battery drain currents with up to 1 Msample/s, 18-bit digitizing and 0.1 nA and 1 µV sensitivities • Simultaneously capture voltage and current waveforms to determine a device’s instantaneous peak and average power • Evaluate low power components including quiescent or sleep mode states with 10 nV, 0.1 µΩ, and 1 pA sensitivities • Make high accuracy, low resistance measurements with offset compensated Ohms, four-wire measurement, and dry circuit voltage control • Maximize test uncertainty ratios based on 1-year DV volts accuracies as good a 14 ppm.• Reduce test time by executing test scripts with the Embedded Test Script Processor, which saves PC command communication overhead.• Obtain tight synchronization between the two DMMs using TSP-Link ® communicationSource and measure multiple DUTs with the compact, high density configuration of the dual-DMMDMM7512 and the four-channel 2606B System SourceMeter SMU Instrument. To maximize test speed, use a test script to execute testing with one master instrument and control all instruments with the TSP-Link interface.PCLearn more about the DMM7512DIGITAL MULTIMETER SELECTOR GUIDEHIGH ACCURACY WITH HIGH RESOLUTION2010 Low Noise 7½-Digit Autoranging Multimeter• Resolve low voltages with the 100 nVrms noise floor• Make automatic ratio measurements on two voltageswith the front and rear inputs• Minimize device self-heating with low power resistancemeasurements• Avoid breaking down oxides or films on relay contactsand connectors with the dry circuit test function• Test up to 10 DUTs with an optional voltage ortemperature plug-in scan card• Interface to a PC with the RS-232 or the GPIB interface2001 7½-Digit High Performance Multimeter• Capture spikes as narrow as 1µs with the peakdetector function• Perform in-circuit current measurements withoutbreaking the circuit• Automatically separate components based onmeasurement limits using the Binning function• Measure up to 10 channels of voltage or 9 channels oftemperature with the optional plug-in scanner cards• Make high accuracy, 2 MHz bandwidth AC voltage measurements for control system analysis• Connect to a PC with the GPIB interface2002 8½-Digit High Performance Multimeter• Make the most accurate voltage measurements withtolerances as narrow as 10 ppm• Capture spikes as narrow as 1 µs with the peakdetector function• Perform in-circuit current measurements withoutbreaking the circuit• Automatically separate components based onmeasurement limits using the Binning function• Measure up to 10 channels of voltage or 9 channels of temperature with the optional plug-in scanner cards• Make high accuracy, 2 MHz bandwidth AC voltage measurements for control system analysis• Connect to a PC with the GPIB interface | 910 | DIGITAL MULTIMETER SELECTOR GUIDEPRECISION MULTI-CHANNEL MEASUREMENTS FOR DATA ACQUISITION2700 and 2701 Multimeter/Data Acquisition/Switch Systems• Set up multi-channel measurement and datalogging systems with a switch system combined with a 6½-digit DMM • Configure systems with a selection of 12 Series 7700 switch and control plug-in modules • Build systems as large as 80 channels with two card slots for plug-in modules • Use the instrument as an independent digital multimeter for test setup and troubleshooting • Connect to a PC with either the RS-232 interface or the GPIB interface (2700) or the LAN interface (2701)2750 Multimeter/Switch System• Build a test system as large as 200 differential input channels • Design a versatile system using up to 5 different models of the 7700-series plug-in switch modules in a 2750• Measure low resistivecomponents with 1 µΩ sensitivity• Use the dry circuit function to protect sensitive devices fromdamage and to minimize self-heating errors during testing • Make measurements with the high performance 6½-digit DMM • Interface to a PC with the GPIB or RS-232 interfaceLearn more about the 2700 and 2701Learn more about the 2750 | 11DIGITAL MULTIMETER SELECTOR GUIDEPRECISION MULTI-CHANNEL MEASUREMENTS WITH BOTH MORE PERFORMANCE AND WITH THE MOST SIMPLIFIED SETUP PROCEDUREDAQ6510 Data Acquisition and Logging, Multimeter System• Set up a test in minutes with the 5-inch (12.7 cm) touchscreen display and graphical user interface • Test low power devices with current sensitivity down to 10 pA • Save upgrade costs by using the same plug-in switch modules as the 2700 Series instruments • Monitor up to 80 channels ofthermocouple, RTD, or thermistor temperature measurements • Monitor fast-changing signals with the 1 Msample/s, 16-bit digitizer • Make high precision measurementswith the high performance 6½-digit DMM • Interface to a PC with either LAN LXI or USB or add an RS-232 or a GPIB option • Control other instruments and execute a test with the built-in scripting code and the Test Script Processor (TSP ®), TSP-Link ®I/O optionObtain data while an environmental test is in process for faster access to test results.12 | DIGITAL MULTIMETER SELECTOR GUIDEHIGH CHANNEL COUNT AND PRECISIONMEASUREMENT DATA ACQUISITION SYSTEMS3706A System Switch/Multimeter• Build a test system with as many as 576 two-wire or 720 one-wire multiplexed channels or with up to 2,688 matrix crosspoints • Fill up to 6 slots with 10different 3700 Series plug-in switch modules • Make the most accurate measurements with the 7½-digit DMM and 13 measurement functions • Maximize throughput with measurement speeds up to 14,100 readings/s• Minimize time-consuming interaction with a PC by using the 3706A as a master system controller using Keithley’s internal Test Script Processor (TSP ™) software • Control other LAN-based instruments with the TSP-Link interface •Interface to a PC with LAN/LXI, USB, or GPIB interfacesLearn more about the 3706A16-pin connector test system using a 2450 Source-Measure Instrument and a 3706A with 3740 and 3721 Multiplexer Plug-In ModulesDIGITAL MULTIMETER SELECTOR GUIDE Appendix 1: Plug-in Scanner Card Options forthe DMM6500, 2000, 2001, 2010, and 2002Digital Multimeters | 13DIGITAL MULTIMETER SELECTOR GUIDEAppendix 2: Plug-in Switch Modules for the 2700Series and DAQ6510 Data Acquisition Systems14 | DIGITAL MULTIMETER SELECTOR GUIDE Appendix 3: Plug-in Switch Modules for the3706A System Switch/Multimeter | 1516 | DIGITAL MULTIMETER SELECTOR GUIDETo learn more about our basic performance, high speed, and high accuracy digital multimeters, visit /digital-multimeter .To learn more about our multi-channel measurement digital multimeters, visit /keithley-switching-and-data-acquisition-systems.DMM Comparison TableDIGITAL MULTIMETER SELECTOR GUIDE | 17Contact InformationAustralia* 1 800 709 465Austria 00800 2255 4835Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777Belgium* 00800 2255 4835Brazil +55 (11) 3759 7627Canada180****9200Central East Europe/Baltics +41 52 675 3777Central Europe/Greece +41 52 675 3777Denmark +45 80 88 1401Finland +41 52 675 3777France* 00800 2255 4835Germany* 00800 2255 4835Hong Kong 400 820 5835India 000 800 650 1835Indonesia 007 803 601 5249Italy 00800 2255 4835Japan 81 (3) 6714 3086Luxembourg +41 52 675 3777Malaysia 180****5835Mexico, Central/South America and Caribbean 52 (55) 56 04 50 90Middle East, Asia, and North Africa +41 52 675 3777The Netherlands* 00800 2255 4835New Zealand 0800 800 238Norway 800 16098People’s Republic of China 400 820 5835Philippines 1 800 1601 0077Poland +41 52 675 3777Portugal 80 08 12370Republic of Korea +82 2 6917 5000Russia/CIS +7 (495) 6647564Singapore 800 6011 473South Africa +41 52 675 3777Spain* 00800 2255 4835Sweden* 00800 2255 4835Switzerland* 00800 2255 4835Taiwan 886 (2) 2656 6688Thailand 1 800 011 931United Kingdom/Ireland* 00800 2255 4835USA 180****9200Vietnam 12060128* European toll-free number.If not accessible, call:+41 52 675 3777Rev. 090617Find more valuable resources at Copyright © Tektronix. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes thatin all previously published material. Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade namesreferenced are the service marks, trademarks or registered trademarks of their respective companies.102618.SBG 1KW-61350-1。

RAM..G Relay Datasheet说明书

1-pole, solid state relay with LED and built-in Varistor, VDE certifiedMain features• AC switching Solid State Relay• Direct copper bonding (DCB) technology • Back to Back thyristor output• VDE certified for Glow wire test according to IEC/EN 60335-1• 100,000 cycles UL endurance test*• Integrated overvoltage protection • LED for control presence indication • Clip-on IP20 protection cover • Self-lifting terminals•65 kA UL short circuit current rating* selected modelsThe industrial, 1-phase relay with antiparallel thyristor output is the most widely used industrial SSR due to its multiple application possibilities. The relay can be used for resistive, inductive and capacitive loads. The zero switching relay switches ON when the sinusoidal curve crosses zero and switches OFF when the current crosses zero. The built-in varistor secures transient protection. The LED indicates the status of the control input. The clipon cover secures touch protection (IP 20). Protected output terminals can handle cables up to 16 mm².Specifications are at a surrounding temperature of 25°C unless otherwise specified.RAM1A..GApplicationsPlastic injection machines, Extrusion machines, Blow moulding machines, Thermoformers, Dryers, Electrical ovens, Fryers, Shrink tunnels, Air handling units, Sterilisation equipment, Climatic chambers, Ovens and furnaces, Ambient heating.Main functions• 1-pole, zero cross switching• Rated output voltage up to 660 VAC • Rated output current up to 125 AAC•3(4)-32 VDC or 20-280 VAC/22-48 VDC control voltage rangeOrder codeEnter the code option instead of . Refer to the Selection guide section for valid part numbers.Selection guideCarlo Gavazzi compatible componentsCarlo Gavazzi further readingStructureFeaturesGeneral dataPerformanceOutput specifications1. Refer to Heatsink selection section2. UL requirement for General Use Endurance Testing is 6,000 cyclesOutput voltage specificationsMotor ratings*: HP (UL508)* With suitable heatsink.InputsOutput power dissipationHeatsink selectionThermal resistance [°C/W] of RAM1A..25Thermal resistance [°C/W] of RAM1A..50, 51Thermal resistance [°C/W] of RAM1A..100Thermal resistance [°C/W] of RAM1A..125'nh' means no heatsink necessary. The SSR should still be tightened to a surface to ensure optimal thermal dissipation.Thermal data3. Thermal resistance case to heatsink values are applicable upon application of a fine layer of silicon based thermal paste HTS02S from Electrolube between SSR and heatsinkCompatibility and conformanceEN 60947-4-3 / EE: BS EN 60947-4-3EN 60947-4-3 / EMC: BS EN 60947-4-3UL508 Recognised (E80573), NRNT2, NRNT8C22.2 No.14, (204075)Note:• Control input lines must be installed together to maintain products’ susceptibility to Radio Frequency interference.• The control terminals A1, A2 (RAM1A..A..G) shall be supplied by a secondary circuit where power is limited by a transformer, rectifier, voltage divider, or similar device that derives power from a primary circuit, and where the short-circuit limit between conductors of the secondary circuit or between conductors and ground is 1500 VA or less. The short-circuit volt ampere limit is the product of the open circuit voltage and the short circuit ampere.• Performance Criteria 1 (PC1): No degradation of performance or loss of function is allowed when the product is operated as intended.• Performance Criteria 2 (PC2): During the test, degradation of performance or partial loss of function is allowed. However when the test iscomplete the product should return operating as intended by itself.• Performance Criteria 3 (PC3): Temporary loss of function is allowed, provided the function can be restored by manual operation of the controls.The declaration in this section is prepared in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364-2014: Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical Products.这份申明根据中华人民共和国电子工业标准SJ/T11364-2014：标注在电子电气产品中限定使用的有害物质Protection Co-ordination, Type 1 vs Type 2:Type 1 protection implies that after a short circuit, the device under test will no longer be in a functioning state. In Type 2 co-ordination the device under test will still be functional after the short circuit. In both cases, however the short circuit has to be interrupted. The fuse between enclosure and supply shall not open. The door or cover of the enclosure shall not be blown open. There shall be no damage to conductors or terminals and the conductors shall not separate from terminals. there shall be no breakage or cracking of insulating bases to the extent that the integrity of the mounting of live parts is impaired. Discharge of parts or any risk of fire shall not occur.The product variants listed in the table hereunder are suitable for use on a circuit capable of delivering not more than 65,000 Arms Symmetrical Amperes, 600Volts maximum when protected by fuses. Tests at 65,000A were performed with Class J, fast acting: please refer to the table below for maximum allowed ampere rating of the fuse. Use fuses only.zz = 00, without fuse trip indication,zz = 21, with fuse trip indication.4. Between MCB and Load (including return path which goes back to the mains).Note: A prospective current of 6 kA and a 230 / 400 V power supply is assumed for the above suggested specifications. For cables with different cross section than those mentioned above please consult Carlo Gavazzi's Technical Support Group.S201 models refer to 1-pole M.C.B., S202 models refer to 2-poles M.C.B.DimensionsAPPLY HEATSINK COMPOUNDDimensions in mm.Tolerances ±0.5 mm.Control InputL1L2/NFunctional diagram* Varistor across input applies to AC control versions only.Connection diagramA1(A2()+~L1-~Connection SpecificationsCOPYRIGHT ©2022Content subject to change.Download the PDF: https://。

Stryker Power-PRO IT 6516 零件手册说明书

ROMANIA Stryker Osteonics Romania S.R.L. 19, Leonida Str. District 2 7000 Bucharest Romania Phone: 011-40-2-12-12-11-22 Fax: 011-40-2-12-12-11-33
SOUTH AFRICA Stryker Osteonis PTY. LTD. 3 Susan Street Strydom Park Johannesburg, 2194 - South Africa Mailing Address:
PORTUGAL Stryker Portugal Produtos Medicos, LTDA. Avenida Marechal Gomes da Costa, 35 1800-255 Lisboa Portugal Phone: 011-35-1-21-839-49-10 Fax: 011-35-1-21-839-49-19
P.O. Box 48039 2129 Roosevelt Park Johannesburg, South Africa Phone: 011-27-11-791-4644 Fax: 011-27-11-791-4696
SPAIN Stryker Iberia SL c/Sepulveda n17 28108 Alcobendas Madrid Spain Phone: 011-34-91-728-35-00 Phone: 011-34-91-358-20-44 Fax: 011-34-91-358-07-48
NEDERLANDS Stryker Nederlands BV (P.O. Box 13, 4180 BA Waardenburg) 4181 CD Waardenburg The Nederlands Phone: 011-31-418-569-700 Fax: 011-31-418-569-777

FGA40N65SMD;中文规格书,Datasheet资料

G CE
TO-3PN
Absolute Maximum Ratings
Symbol
VCES VGES IC
ICM (1) IF
IFM (1) PD
TJ Tstg TL
Description
Collector to Emitter Voltage
Gate to Emitter Voltage
Collector Current Collector Current
DTJ ICES IGES
Collector to Emitter Breakdown Voltage VGE = 0V, IC = 250mA
Temperature Coefficient of Breakdown
Voltage
VGE = 0V, IC = 250mA
Collector Cut-Off Current G-E Leakage Current
IC = 40A, VGE = 15V
IC = 40A, VGE = 15V, TC = 175oC
Dynamic Characteristics
Cies Coes Cres
Input Capacitance Output Capacitance Reverse Transfer Capacitance
Typical Performance Characteristics
Figure 1. Typical Output Characteristics
120
o
TC = 25 C
20V 12V 15V
100
10V
Collector Current, IC [A]
80
60

AN-65 LYTSwitch-5产品系列应用指南说明书

应用指南AN-65LYTSwitch-5产品系列www.power .com 2016年7月设计指南与注意事项简介The LYTSwitch™-5系列产品非常适合25 W 以内灯泡、灯管和内嵌式照明应用的单级功率因数校正恒流LED 驱动器设计。

每个器件在单个封装中集成了高压功率MOSFET 、变频和导通时间控制引擎、带软结束的快速启动以及多项保护功能（包括快速的输入过压关断、输出短路自动重启动、输出过压锁存关断和带过热关断的热折返特性），可极大减少元件数目。

其内部反馈控制器能够间接和直接感测输出电流（可通过外部设定电阻设置），从而可省去光耦，特别适合隔离式设计应用。

集成的725 V 功率MOSFET 可在高压输入AC 应用中提供非常大的漏极耐受电压裕量，从而提高可靠性。

此外，也可选择625 V 功率MOSFET 的产品，在MOSFET 电压应力较低的应用当中可以降低成本。

拓扑中立的LYTSwitch-5器件以非连续导通模式(DCM)进行工作，通过其内部的控制算法可实现输入电压范围内和不同工作温度下的高精度输出电流调整率，以及具有极小谐波电流的高功率因数。

采用开关管位于低端的开关拓扑结构，MOSFET 使用电气上安静的源极引脚进行散热，再加上频率调制技术和DCM 工作模式的应用，可在功率MOSFET 处于关断状态时实质上消除输出二极管上出现反向电流的可能，从而降低高频率噪声。

因此，可以使用简单的小型号输入π型滤波器，同时可产生低EMI （注意：低输入电容可减小THD 和增大PF ）。

典型电路配置LYTSwitch-5产品系列属于拓扑中立型器件，它们可用于任何开关配置，如降压（抽头-降压）、降压-升压（抽头降压-升压）、升压以及反激式（隔离和非隔离）拓扑结构，因此可广泛满足不同电压的LED 灯串的任何设计要求。

LYTSwitch-5具有非常高的集成度，可轻松实现变换器和EMI 部分的设计优化，从而缩短开发时间。

2.5英寸硬盘商品说明书

CONTINUED > 2.5-Inch HDD pg 2CONTINUED > 2.5-Inch SSD pg 3New Seagate Model Number Key, EnterpriseST 500 NM 123 1BRANDCAPACITYSEGMENTATTRIBUTESGENERATION2 letters ST = Seagate MX = Maxtor2 to 4 digits 500 = 500GB 1000 = 1000GBCapacities >9999GB:10 = 10TB 15 = 15TB2 lettersMM = Mission-Critical, 2.5-Inch, 10K MX = Mission-Critical, 2.5-Inch, 15K NM = Nearline, 3.5-Inch NX = Nearline, 2.5-Inch FM = SSD Mainstream FX = SSD Performance3 digits, non-intelligentVaries as needed, for example:Interface RPM Cache SED1 digit, intelligent 1 = 1st Generation2 = 2nd Generation3 = 3rd GenerationSeagate Partner Program MembersVisit the Sales Tools section to access the latest product roadmap, end-of-life schedule and product information. DistributorsEMEA SPP Support00-800-6890-8282US Sales Support1-800-SEAGATE or 1-405-324-4700Visit for more information or call 1-800-SEAGATE (1-800-732-4283) © 2012 Seagate Technology LLC. All rights reserved. Printed in USA. Seagate, Seagate Technology and the Wave logo are registered trademarksof Seagate Technology LLC in the United States and/or other countries. Cheetah, Constellation.2, Pulsar, Pulsar.2 and Savvio are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments. All other trademarks or registered trademarks are the property of their respective owners. When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual data rates may vary depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit ). Seagate reserves the right to change, without notice, product offerings or specifications. QR501.17-1210US, October 20121 One gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes when referring to hard drive capacity.2 Self-Encrypting Drives (SED) and FIPS 140-2 Validated drives are not available in all models or countries. May require TCG-compliant host or controller support.3 See FIPS 140-2 Level 2 Certificate at /groups/STM/cmvp/documents/140-1/1401val2010.htm#12994 Data provided is based on format at 512 bytes.View a brief training presentation on how our model number format has changed at /seagate/ModelNumber。

IXYS CORPORATION XPTM 650V IGBT 数据手册说明书

XPT TM 650V IGBT GenX4TMCES I C90= 295A V CE(sat) ≤ 1.7V t fi(typ)= 80ns∑ymbol Test ConditionsMaximum Ratings V CES T J = 25°C to 175°C650V V CGR T J = 25°C to 175°C, R GE = 1M Ω 650V V GES Continuous ±20V V GEM Transient±30VI C25T C = 25°C 450 AI C90T C = 90°C 295A I CMT C = 25°C, 1ms 1200ASSOA V GE = 15V, T VJ = 150°C, R G = 1Ω I CM = 400A(RBSOA) Clamped Inductive Load @V CE ≤ V CES t scV GE = 15V, V CE = 360V, T J = 150°C 10 μs (SCSOA)R G = 10Ω, Non Repetitive P C T C = 25°C1200W T J -55 ... +175°C T JM 175°C T stg -55 ... +175°CT LMaximum Lead Temperature for Soldering 300°CT SOLD 1.6 mm (0.062in.) from Case for 10s 260°CV ISOL 50/60Hz, 1 minute 2500V~F C Mounting Force50..200/11..45N/lbWeight8 gSymbol Test Conditions Characteristic Values (T J = 25︒C, Unless Otherwise Specified) Min. Typ. Max.BV CES I C = 250μA, V GE = 0V 650 VV GE(th)I C= 4mA, V CE = V GE4.06.5VI CES V CE = V CES , V GE = 0V25μA T J = 150°C 2 mA I GES V CE = 0V, V GE = ±20V±200 nAV CE(sat)I C = 160A, V GE = 15V, Note 11.4 1.7 V T J = 150°C1.4 VFeatures●Very High Current Capability ●Square RBSOA ●Short Circuit Capability ●Silicon Chip on Direct-Copper Bond (DCB) Substrate ●Isolated Mounting Surface ●2500V~ Electrical Isolation ●Optimized for Low Conduction and Switching LossesAdvantages●High Power Density●Low Gate Drive RequirementApplications●Power Inverters ●UPS●Motor Drives ●SMPS●PFC Circuits ●Battery Chargers ●Welding Machines ●Lamp BallastsExtreme Light Punch Through IGBT for 10-30kHz SwitchingG = GateE = EmitterC = CollectorGCEIsolated TabCEG(Electrically Isolated Tab)IXYS Reserves the Right to Change Limits, Test Conditions, and Dimensions.Symbol Test Conditions (T J = 25°C Unless Otherwise Specified)fs I C = 60A, V CE = 10V, Note 1 50 85iesoes V CE = 25V, V GE resQ g(on)Q ge I C = 200A, V GE Q gc d(on)Notes:1. Pulse test, t ≤ 300μs, duty cycle, d ≤ 2%.2. Switching times & energy losses may increase for higher V CE (clamp), T J or R G .Inductive load, T PRELIMINARY TECHNICAL INFORMATIONThe product presented herein is under development. The Technical Specifications offered are derived from data gathered during objective characterizations of preliminary engineering lots; but also may yet contain some information supplied during a pre-production design evaluation. IXYS reserves the right to change limits, test conditions, and dimensions without notice.Fig. 1. Output Characteristics @ T 150200250300350I C - A m p e r e sIXYS Reserves the Right to Change Limits, Test Conditions, and Dimensions.Fig. 7. Transconductance6080100120140160g f s - S i e m e n sFig. 12. Inductive Switching Energy Loss vs.Gate Resistance34567E o f f - M i l l i J o u l e sE off E onT J = 150oC , V GE = 15V V CE = 400VI C = 100AIXYS Reserves the Right to Change Limits, Test Conditions, and Dimensions.Fig. 18. Inductive Turn-on Switching Times vs.Gate Resistance6080100120140160180200t r i - N a n o s e c o n d st r i t d(on)T J = 150ºC, V GE = 15V V CE = 400VPIN: 1 = Gate 5-12 = Emitter 13-24 = CollectorPackage Outline。

TFS65中文资料

Operating temperature range - 25 °C ... + 80 °C Storage temperature range - 40 °C ... + 85 °C ___________________________________________________________________________________________________ *) For the 2nd filter fCOT is its reference frequency fC at the operation temperature OT = 70 °C ± 1 °C. The reference frequency at ambient temperature fCAT for this 2nd filter and the from it resulting relative frequency distance have to be determined. Responsible: Generated: Weinberg Checked/Approved: Dr. Bert Wall
1. pin connection and 50 Ω matching network see page 2.
Version 3.2
06.01.02
23 °C Ambient temperature TA: Input power level: 0 dBm (typ.) Max 10 dBm. Terminating impedances at fc: for input: ≈ 2650 Ω -17,9 pF (has to be adjusted) for output: 1950 Ω -5,62 pF 2. Characteristics

PT650F说明书

2.3 模拟部份
1. 适用之传感器类型 : 适用于所有电阻应变式测力与称重传感器
2. 传感器输入电压 : ≦直流电 10V±5%, 最多可供电 280 毫安
3. 最大输入电压
: ±10V(在 SG+与 SG-之间)
4. 输出灵敏度
: 0.5μV/格至 200μV/格
5. 输入阻抗
: 在 500VDC 时, 每个端子之间阻抗大于 100MΩ
并行 BCD 资料输出接口, 模拟输出接口, 并行打印机接口
PT650F 使用说明书
3
2. 技术规格
2.1 一般规格
1. 电源 2. 消耗功率 3. 工作温度 4. 湿度
: 交流电 110V, 220V±10%, 50/60 赫兹(出厂前指定) : 18 瓦 : 从-10℃至 50℃(14℉到 122℉) : 90%相对湿度(无凝结水)
2
PT650F 使用说明书
最大量程: 指为显示器设计(略去小数点后)可显示的最大数值.
分辨率: 指最大量程与显示间距之比例.
自重: 指承载器本身的重量使电阻应变式传感器产生的输出电压.
秤量间距: 指称重显示装置对秤的承载器上单位标准重量变化所显示之数值, 也即俗称的量程.
1.3 特点
l 可用于所有电阻应变式测力与称重传感器. l 采用微处理器控制操作. l 选用清晰稳定的 13mm 6 位荧光管显示. l 可选择显示毛重及凈重. l 显示之重量可选用如下不同的分度间距: 1, 2, 5, 10, 20 或 50. l 超载时显示 “o.L” . l 可选择 4 个小数点位置. l 自动零位跟踪. l 轻触式按键自动去皮. l 可使用按键键入皮重. l 采用 Delta-Sigma 方法. l 内部分辨率为 16,000,000. l 显示分辨率为 100 至 20,000. l 采样速度大约为每秒 100 次. l 接通电源时具有自我诊断功能. l 标准串行式 RS232/RS485 资料输出接口. l 标准高低比较输出接口(光耦隔离耐压 500VDC). l 可接大屏幕显示器的标准资料输出接口. l 可使用软件进行功能设定. l 内部设有开关作为保护参数设定和调校. l 可选配之接口板:

TPS658620ZQZR;TPS658620ZQZT;中文规格书,Datasheet资料

1Introduction1.1Main Features1.2Applications1.2.1Overview•USB Current Limiting•BATTERY CHARGER•Max 18V Over-Voltage Protection –Complete Charge Management Solution for –Power Good Monitoring on all Supply a Single Cell Li-Ion/Li-Pol Cell WithOutputsDynamic Power Management and Thermal Foldback.–Software Reset Function–Maximum 1.0A charge current–Hardware On/Off and Reboot Control –Programmable Adapter and USB Charge –11Channel ADC With 3Operating Modes Operation•Single Conversion •INTEGRATED POWER SUPPLIES•Peak Detection –3Programmable Step-Down converters•Averaging•Software Controlled Enable/Forced PWM Mode•Automatic Power Saving Mode •Maximum 1.2A Outputs•Smart Phones–11Programmable General Purpose LDOs •Portable Navigation Devices •7With Output Voltages of 1.25V to 3.3V •Portable Media Players•2With Output Voltages of 0.725V to 1.5V or 1.25V to 2.586V (factory configurable)•1“Always On”With Output Voltages of 1.25V to 3.3V•1With Output Voltage of 1.70V–2.475V •DISPLAY SUPPORT FUNCTIONS–4PWM Outputs With Programmable Frequency and Duty Cycle –Dual RGB LED Drivers–Constant Current WLED Driver •26.5V (max)at 25mA •Over-Voltage Protection•Programmable Current Level and Brightness Control •HOST INTERFACE–Interrupt Controller With Maskable Interrupts–External ADC Triggering and Step-Down Converter Mode Control •SYSTEM MANAGEMENT –Dual Input Power PathThe TPS658620provides an easy to use,fully integrated solution for handheld devices,integrating charge management,multiple regulated power supplies,system management and display functions in a small 6x6package.The I 2C interface enables control of a wide range of subsystem parameters.Internal registers have a complete set of status information,enabling easy diagnostics and host-controlled handling of fault conditions.Please be aware that an important notice concerning availability,standard warranty,and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this document.PRODUCTION DATA information is current as of publication date.Copyright ©2009,Texas Instruments IncorporatedProducts conform to specifications per the terms of the Texas Instruments standard warranty.Production processing does not necessarily include testing of all parameters.ORDERING INFORMATION2Electrical Specifications2.1ABSOLUTE MAXIMUM RATINGS PACKAGET A PART NUMBER(1)(2)PACKAGE(3)ORDERING(1)PACKAGE MARKINGDESIGNATOR–40°C to85°C TPS658620MicroStar BGA ZQZ TPS658620ZQZ TPS658620(1)The TPS658620is only available taped and reeled.Quantities are2,500devices per reel.(2)Devices with distinct part numbers have unique factory configurations for supply defaults,sequencing and other functions.Consult thefactor for configuration information for each part number.(3)This product is RoHS compatible,including a lead concentration that does not exceed0.1%of total product weight,and is suitable foruse in specified lead-free soldering processes.In addition,this product uses package materials that do not contain halogens,including bromine(Br)or antimony(Sb)above0.1%of total product weight.over operating free-air temperature range(unless otherwise noted)(1)VALUE/UNITSAC and USB with respect to AGND1–0.3V to18V ANLG1,ANLG2,ANLG3with respect to AGND2–0.3V to6.5VV(SYS),V(VIN_CHG)with respect to AGND1–0.3V to6.5VVIN_LDO01,VIN_LDO23,VIN_LDO4,VIN_LDO678,VIN_LDO9with respect to AGND1–0.3V to6.5V ADC_REF with respect to AGND2–0.3V to3.6V RTC_OUT with respect to V(SYS)–5.5V to3.6V RTC_OUT with respect to AGND1–0.3V to3.6V LDO0,LDO1,LDO2,LDO3,LDO4,LDO5,LDO6,LDO7,LDO8,LDO9,V2V2and TS with respect to AGND1–0.3V to3.6VV32K with respect to AGND1–0.3V to3.6VTS with respect to V2V2–2.3V to0.3VSM0,L0,VIN_SM0with respect to PGND0–0.3V to6.5VSM1,L1,VIN_SM1with respect to PGND1–0.3V to6.5VSM2,L2,VIN_SM2with respect to PGND2–0.3V to6.5VSM3,L3with respect to PGND3–0.3V to29VSM3SW with respect to PGND3–0.3V to29VFB3with respect to PGND3–0.3V to0.5VV(BAT)with respect to AGND1,Battery power only–0.3V to4.6VAll other pins(except AGNDn and PGNDn)with respect to AGND1–0.3V to6.5V AGND2,AGND3,,DGND1,DGND2DT,PGND0,PGND1,PGND2,PGND3with respect to AGND1–0.3V to+0.3V Input Current,AC pin Defined by ILIM Input Current,USB pin Defined by ILIM Output continuous current,SYS,VIN_CHG pins2500mAOutput continuous current,BAT pin–3000mA Continuous Current at L0,PGND0,L1,PGND11500mA Continuous Current at L3,PGND31000mA Continuous Current at L2,PGND22000mA Operating free-air temperature,T A–40°C to85°C Maximum junction temperature,T J125°CStorage temperature,T STG–65°C to150°C Lead temperature1,6mm(1/16-inch)from case for10seconds260°CHBM rating,all pins2kVMM rating,all pins100V(1)Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device.These are stress ratingsonly and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied.Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.Electrical Specifications2Submit Documentation FeedbackDISSIPATION RATINGS2.2RECOMMENDED OPERATING CONDITIONST A ≤25°C DERATING FACTOR T A =55°C T A =70°C T A =85°C PACKAGE Psi_Jb POWER RATINGABOVE T A =25°CPOWER RATINGPOWER RATINGPOWER RATINGZQZ25°C/W4000mW40.0°C/W2800mW2200mW1600mWover operating free-air temperature range (unless otherwise noted)MINMAX UNIT AC and USB with respect to AGND1 4.3016.5(1)V V(SYS)with respect to AGND12.9 5.5V V(BAT)with respect to AGND1,battery power only2.9 4.6V V(BAT)with respect to AGND1,battery connected,AC or USB 2.15 4.6V power selected,Selected power source >2.9V ANLG1,ANLG2,ANLG3with respect to AGND22.6V VIN_LDO01,VIN_LDO23,VIN_LDO678,VIN_LDO4,VIN_LDO9Greater of :1.7V OR Minimum input voltage 5.5Vwith respect to AGND1required for LDO/Converter operation outsidedropout region VIN_SM0with respect to PGND0Greater of :2.3V OR Minimum input voltage 5.5Vrequired for LDO/Converter operation outside dropout region.2.9V to meet parametricspecifications.VIN_SM1with respect to PGND128V VIN_SM2with respect to PGND228V VIN_SM4with respect to PGND428V SM3with respect to PGND328V GPIOx with respect to AGND10 5.5V All other pins (except AGNDn and PGNDn)with respect to AGND10 5.5V Operating free-air temperature,T A-4085°C Maximum junction temperature,T J ,functional operation -40125°C Maximum junction temperature,T J ,electrical characteristics 0125°CExternal supply ramp rate,AC or USB pins 1V/mSec1V/µSec(1)Thermal operating restrictions are reduced or avoided if input voltage does not exceed 5V.Submit Documentation Feedback Electrical Specifications 3over operating free-air temperature range(unless otherwise noted)PARAMETER TEST CONDITIONS MIN TYP MAX UNIT QUIESCENT CURRENT–V(BAT)=4.2V NO EXTERNAL LOADS AT SYS PIN OR SUPPLY OUTPUTSQuiescent current,6586x in normal or sleepI Q(ON)Power path active,control logic in low power mode(1)375µAmode.All supplies,peripherals and charger offI Q(DIGITAL)Quiescent current,control logic Control logic in high power mode(2)716870µASM0,SM1:enabled,PFM mode,from SYS pin1425µASM2:enabled,PFM mode,from SYS pin1932µA I Q(SMn)SM0,SM1,SM2operating quiescent currentSM0,SM1,SM2:enabled,PWM mode,from VINSMn pin6mA1µAdisabled via I2CI(LDOx)=no external load2429µAI(LDOx)=–1mA24150µA LDO quiescent current,All but one LDOxI Q(LDOx)disabled I(LDOx)=–50mA160µALDO disabled,T J=85°C13µASM3enabled,not switching1530µAEnabled,switching200µA I Q(SM3)SM3operating quiescent current1µADisabled via I2CConversion active1mANot converting,waiting for trigger170µA I Q(ADC)ADC operating quiescent current1µAADC disabled via I2CRTC_OUT LDO enabled2745µAI Q(RTC)RTC_OUT pin quiescent current RTC_OUT disabled via I2C,TJ =85°C.Externally applied(3)15µAV(RTC_OUT)=2V supplies real time clock counters and xtal oscillator32k buffer enabled,100pF external load24µAI Q(V32K)V32K supply bias current,32k buffer enabled8µADisabled via I2CCharger enabled,termination detected4050µAI Q(CHG)Charger quiescent current Charger enabled,termination disabled,charge current=02mACharger disabled510µAI2C INTERFACE TIMING–SDA,PSDA,PSCLK,SCLKT R SCLK/SDATA rise time300nsT F SCLK/SDATA fall time300nsT W(H)SCLK pulse width high600nsT W(L)SCLK Pulse Width Low 1.3µsT SU(STA)Setup time for START condition600nsT H(STA)START condition hold time after which first600ns clock pulse is generated Pull-up resistors connected to2.2VT SU(DAT)Data setup time100nsT H(DAT)Data hold time0nsT SU(STOP)Setup time for STOP condition600nsT(BUF)Bus free time between START and STOP 1.3µs conditionF SCL Clock Frequency400kHzI2C BUFFERS–SDA,PSDA,PSCLK,SCLKV IL(I2C)Low level input voltage0.4VV IH(I2C)High level input voltage 1.15VV OL(I2C)Low level output voltage SDA,PSDA configured as output,I OL=3mA0.4VI O(I2C)Maximum load current SDA,PSDA configured as output8mAI LKG(I2C)Input current V(pin)=5V or0V 1.0µAC I2C Input pin capacitance SDAT,SCLK,PSDAT,PSCLK pins10pFC I2CBUS SDAT,SCLK,PSDAT,PSCLK400pFI2C bus capacitance(1)Control logic in low power mode when all functions are off and no I2C communication is on going(2)Control logic in high power mode when one of the following events happen:6586x in power-up/rtc/rtc_on/supplyseq states,anyconverter in PWM mode,SM3enabled,PWM driver enabled,ADC conversion on-going,I2C communication on-going,voltage transition for DVM supplies on-going,charger on,AC or USB supply detected,initial power-up cycle.(3)External voltage supplied by supercap or coin cell connected to RTC_OUT pin,see application diagram for details.Electrical Specifications4Submit Documentation Feedbackover operating free-air temperature range(unless otherwise noted)PARAMETER TEST CONDITIONS MIN TYP MAX UNIT DIGITAL INPUT BUFFERS:RESUME,SM0EN,SM1EN,SM2EN,HOTRST,LDO4EN,SYNCENV IL(DIG)Low level input voltage0.4VV IH(DIG)High level input voltage 1.15VI LKG(DIG)Input current V(pin)=5V0.1µAR DIG Internal resistor RESUME pin,pull-down to AGND70100130kΩHOTRST pin,pull-up to V2V260100135PUSH-PULL OUTPUT BUFFERS,USER SELECTABLE OUTPUT VOLTAGE–NORTC,nNOPOWERV BFRPWR Buffer positive supply Internally connected to V32K pin 1.1to3.3VV OL(OBFR)Low level output voltage I OL=3mA,V32K=1.5V0.6VI OL=10µA,V32K>1.1V0.1V OH(OBFR)High level output voltage,referenced to output I OH=1.4mA,V32K=1.5V V32K-0.6V buffer supply,NORTC,WAKEUPI OH=-10µA,V32K=1.1V V32K-0.11V OH(OBFR)High level output voltage,referenced to output I OH=1.4mA,V32K=1.5V V32K-0.6V buffer supply,NOPOWERI OH=-10µA,V32K=1.1V V32K-0.11I OL(OBFR)Maximum low level sink current load V(pin)=2.5V5mAI OH(OBFR)Maximum high level source current load V(pin)=0V–5mA OPEN DRAIN OUTPUT BUFFERS–INTV OL(OBFR)Low level output voltage I OL=3mA,V32K=1.5V0.6VI OL=10µA,V32K>1.1V0.1I LKG(OBFR)Output leakage current Output buffer,open-drain mode,V(pin)=5.5V0.1µA PUSH-PULL OUTPUT BUFFERS–LDO4PG,SM0PG,SM1PG,CHGSTATV OL(DBFR)Low level output voltage I OL=3mA0.6VI OL=10µA0.1V OH(DBFR)High level output voltage,buffer configured as I OH=3mA 1.5Vpush-pull via I2C I=–10µA 1.8OHI OL(DBFR)Maximum low level sink current load V(pin)=2.5V5mAI OH(DBFR)Maximum high level source current load V(pin)=0V–5mA32kHz OUTPUT BUFFER,V(32K)=1.7V(min),UNLESS OTHERWISE STATEDV32B Externally applied bias rail for output driver Buffer supply voltage 1.0 3.6VV OL Output low level V(32K)=1.1V,I OL=100µA0.05VV(32K)=1.1V,I OL=1mA0.2V(32K)=1.5V,I OL=5mA0.5V OH Normal operation V(32K)=1.1V,I OH=-1µA V32K-0.05VV(32K)=1.5V,I OH=5mA V32K-0.5T F,T R Rise/fall time32kHz clock driving50pF load cap15nsV JITTER Output jitter Peak to peak15nsRMS1532kHz CLOCK AND32K SWITCHING TIMINGT XTAL XTAL oscillator stabilization time Frequency within2%of typical value,frequency defined by XTAL2scharacteristicsF32K Internal32kHz clock Frequency283236kHz INTERNAL REFERENCES AND PORV UVLO Internal UVLO detection threshold V(2V2)decreasing-3% 1.853%VV UVLO_HYS UVLO detection hysteresis V(2V2)increasing from decreasing trigger point120mVV O(2V2)Output Voltage Always on, 2.1 2.2 2.3VI SH2V2Short Circuit current limit V(2V2)=0v18mA Submit Documentation Feedback Electrical Specifications5over operating free-air temperature range(unless otherwise noted)during reboot cycles or when exiting sleep.Setting the RTC_OUT output voltage below VUVLO_RTC disables the use of the internal real time clock counter and xtal oscillator.6Submit Documentation Feedback Electrical Specificationsover operating free-air temperature range(unless otherwise noted)PARAMETER TEST CONDITIONS MIN TYP MAX UNIT EXTERNAL SUPPLY DETECTION AND STATUSV LOWSYS Minimum system voltage detection threshold System voltage V(SYS)decreasing. 3.0VTotal accuracy,referenced to V(LOWSYS)TYP-22%V HYS(LOWSYS)Minimum system voltage detection hysteresis V(SYS)increasing from decreasing trigger point200mVT DGL(LOWSYS)Minimum system voltage detection deglitch V(SYS)decreasing5ms timeV IN(DT)Input voltage detection threshold.Input voltage AC detected when V(AC)–V(BAT)>V IN(DT)AND V(AC)>V ACMIN180mV increasing,referenced to battery voltage USB detected when V(USB)–V(BAT)>V IN(DT)V IN(NDT)Input voltage removal threshold.Input voltage AC not detected when V(AC)–V(BAT)<V IN(NDT)65mV decreasing,referenced to battery voltage USB not detected when V(USB)–V(BAT)<V IN(NDT)V ACMIN AC detection threshold,relative to GND AC voltage decreasing,AC not detected when V(AC)<V ACMIN 3.5VHysteresis,AC voltage increasing200mVT DGLAC(DT)AC Power detected deglitch AC voltage increasing22.5msT DGLUSB(DT)USB Power detected deglitch USB voltage increasing 5.5msV IN(OVP)Input over voltage detection 5.8 6.0 6.3VT DLY(INOVP)Input over voltage detection delay Rising AC or USB voltage100µs ANALOG COMPARATORV COMPDET Voltage threshold Enabled at sleep mode not set 1.21 1.245 1.28VI QCDET Bias current Always On5µAT P Propagation time V(COMP):0→1.5V→0,measured from input to NOPOWER:HI→LO50µs Submit Documentation Feedback Electrical Specifications7over operating free-air temperature range (unless otherwise noted)PARAMETERTEST CONDITIONSMINTYPMAXUNITPOWER PATH CURRENT LIMIT AND PROTECTION FUNCTIONS –40°C <T A <85°C 90100Selected Input switch not in dropout.I 2C I USB100mA settings:USBMODE=HI,USBLIMIT=LO–25°C <T A <85°C92100Selected input current limit,applies to USB input onlySelected Input switch not in dropout.I 2C settings:USBMODE=HI,I USB500435500mA USBLIMIT=HIInput current limit range,AC input 2.75ASelected input current limit,applies to AC inputTotal accuracy,relative to I INLIM(TYP)–20%20%I INLIMInput current limit range,USB input configured with USBMODE=LO 2.11ASelected input current limit,applies to USB inputTotal accuracy,relative to I INLIM(TYP)–12.5%12.5%Load at SYS pin:80%of current limit value to 120%of regulation value T OVSH Input current limit transient time(I INLIM ,I USB100or I USB500).Time measured from load transient to input current 20µswithin regulation limits.Load at SYS pin:80%of current limit value to 120%of regulation value I OVSHPKUSB Input current limit overshoot(I INLIM ,I USB100or I USB500),20%t <T OVSHV SH(SYS)SYS power path Short Circuit detection threshold All power path switches set to OFF if V(SYS)<V SH(SYS)1.61.82.0V R FLT(USB)SYS short circuit recovery pull-up resistor V(SYS)<V SH(SYS),internal resistor connected from USB to SYS 550ΩR FLT(AC)SYS short circuit recovery pull-up resistor V(SYS)<V SH(SYS),internal resistor connected from AC to SYS550ΩI BATSYSBattery switch over-current detection2.182.54A Short circuit detection blanked for TDGL(BATSYS),measured from batt 100110120ms switch:OFF->ON or initial sys power path enableT DGL(BATSYS)Battery switch over-current detection delayBattery switch already turned on or sys power path enabled1ms Battery switch over-current recovery pull-up current V(BAT)–V(SYS)>V OC(SYS),internal current source connected from BAT to I FLT(SYS)30mA source SYS V SUP(SYS)Supplement detection thresholdBattery switch ON at V(BAT)-V(SYS)>VSUP(SYS)40mV V SUPNDT(SYS)Supplement mode not detected thresholdBattery switch OFF at V(BAT)-V(SYS)<V SUPNDT(SYS)7mVPOWER PATH INTEGRATED MOSFETS CHARACTERISTICS V ACDO =V(AC)-V(SYS);V(AC)=4V AC input current limit set to 2.0A (typ)V ACDO AC switch dropout voltage 150mV I O(SYS)=1.0AI(SYS)+I(BAT)=0.425A 240V USBDO =V(USB)-V(SYS);V USBDO USB switch dropout voltagemV V(USB)=4.6VI(SYS)+I(BAT)=85mA240V BATDODCH =V(BAT)-V(SYS),V(BAT)=3V,V BATDODCHBattery Switch dropout voltage,discharge or charge40150mVI(BAT)=–1APOWER PATH TIMING CHARACTERISTICS T SW(ACBAT)Switching from AC to BAT No USB,AC power removed 150µs T SW(USBBAT)Switching from USB to BATNo AC,USB power removed150µsPOWER PATH DISCHARGE SWITCHES I DCH(AC)AC pin discharge current Always ON,V(AC)>1V 100µA I DCH(USB)USB pin discharge currentAlways ON,V(USB)>1V100µASM0,SM1,SM2DC/DC CONVERTERS Converter turned OFF at V(VIN_SMn)<V SMUV 2.0V Low input voltage detection threshold,input voltage V SMUVdecreasing Hysteresis ,rising input voltage 100mV High side MOSFET on-resistance V IN_SMx =3.6V,100%duty cycle 200m ΩR DS(ON)Low side MOSFET on-resistance V IN_SMx =3.6V,0%duty cycle 200m ΩI LK_HS High side leakage current 1µA T J =85°CI LK_LS Low side leakage current1µA SM0,SM115501860I LIM High side and low side current limit 2.9V ≤V IN_SMx ≤5.5V mA SM2(snubber enabled)15501860f SW Oscillator frequency PWM mode2.025 2.25 2.475MHzPower fault detection,Voltage decreasing,referenced to programmed–13.0%–10%–7.0%output voltageV SMPGPower good thresholdHysteresis,voltage increasing,referenced to V SMPG5%Electrical Specifications 8Submit Documentation Feedbackover operating free-air temperature range(unless otherwise noted)PARAMETER TEST CONDITIONS MIN TYP MAX UNITSM0,low range,25mVV O(SMx)TYP=0.725to1.50stepsSM1,low range,25mVVIN_SMx=2.9V to5.5V V O(SMx)TYP=0.725to1.50V Adjustable output voltage range,Selectable via I2C stepsSM2,high range,50mVV O(SMx)TYP=3.0to4.55stepsV O(SMx)V IN_SMx=2.9V to5.5V,PFM mode–1%1%3% Output Voltage Accuracy,relative to VO(SMx)TYPV IN_SMx=2.9V to5.5V,PWM mode,0mA<I OUT<1A–2%2% DC output voltage load regulation PWM mode,VIN_SMn>2.7V,Load<1A0.25%/A DC output voltage line regulation V IN_SMx=VOUT+0.5V(min.2.5V),PWM mode VIN_SMn>2.7V,Load<1A0.1%/VSM0,SM1:typicalvalues:Instantaneous,0.11,K RAMP(SMx)Voltage change ramp constant mV/µsValue set via I2C,available options:0.22,0.44,0.88,1.76,3.52,7.04Time to start switching,measured from end of I2C command enablingt Start Start-up time210µsconvertert Ramp V OUT Ramp UP time Time to ramp from5%to95%of V OUT250µs R DCH Discharge switch resistance SMx disabled250ΩVIN_SMI PFM(ENTER)Load current to enter PFM mode V IN_SMx=2.9V to5.5V,duty cycle>85%x/A34ΩC LC External LC capacitor 4.722µF L LC External LC inductor 1.5 4.7µH C SMINP External Input capacitor1047µF LDO’S:LDO0,LDO1,LDO2,LDO3,LDO4,LDO5,LDO6,LDO7,LDO8,LDO9Electrical characteristics over the output current range IO(LDOx) 2.3 5.5V INMIN Input voltage range VElectrical characteristics specified,max load current=75mA 1.7 5.5I O(LDOx)Output current300mAAvailable output voltages:Output Voltage,Selectable via I2C.LDO6,LDO0,LDO3,LDO5,V(LDO6)TYP =1.25,1.5,1.8,VLDO7,LDO8,LDO9 2.5,2.7,2.85,3.1,3.3Low range,25mV steps V(LDO1)TYP=0.725to1.5LDO1Output Voltage,Selectable via I2CLDO4Output Voltage,Selectable via High range,25mV steps V(LDO4)TYP=1.7to2.475VLow range,25mV steps V(LDO2)TYP=0.725to1.5LDO2Output Voltage,Selectable via I2CDropout,V(IN)=V(LDOx)TYP-0.1V,V(IN)=2.3V,250mA load.1LDO active at415mVa time per input pin group(1)V(LDOx)LDOx Output Voltage,Selectable via I2CTotal accuracy,V(VIN_LDOx)=V(LDOx)TYP+0.5V,10mA→250mA See(2) 3.5%Line Regulation,100mA load,V(VIN_LDOx):–0.5%0.5%V(LDOx)TYP+0.5V→4.7VLoad regulation,load change from10mA→250mASee(3)%V(VIN_LDOx)>V(LDOx)TYP+0.5V250mA load,1V input to output,C L=4.7µF40PSRR(LDOx)PSRR at20kHz dB100mA load,0.5V input to output,CL=1µF40I SC(LDOx)Short circuit current limit Output grounded(2)LDOnILIM=HI400700mAR DCH(LDOx)Discharge resistor LDOx disabled415ΩK RAMP(LDOx)Voltage change ramp constant LDO2,LDO4only.Fixed value,hardwired at top level7.04mV/µsload<100mA1µFC COMP External output capacitor value Stable operation0.01µF/mA,min cap value=load>100mA1µFPower good threshold LDO output voltage increasing95%P GOOD(LDO)Hysteresis Decreasing voltage from increasing trigger5%(1)Dropout not measured for devices with V(IN)<2.3V because minimum VIN is2.3V(2)MIN=–3.2–(0.105×I LOAD/V(LDOX)TYP),I LOAD=load current in mA(3)MIN=–2.5–(0.105×I LOAD,I LOAD=load current in mASubmit Documentation Feedback Electrical Specifications9over operating free-air temperature range(unless otherwise noted)PARAMETER TEST CONDITIONS MIN TYP MAX UNIT BATTERY VOLTAGE THRESHOLDS AND CHARGER TIMINGT CHGDLY Charger turn-off delay Time delay to turn off charger or set suspend mode25msSelectable via I2C,2.9V orFast charge at V(BAT)>V LOWBAT V Precharge to fast-charge transition,selectable via2.5VV LOWBATI2CTotal accuracy,relative to selected value–3%3%T DGL(PRE)Deglitch time for fast charge to precharge transition Decreasing battery voltage25msNew charge cycle starts ifV RCH Recharge threshold voltage38100170mVV(BAT)<V O(BATREG)–V RCH,after termination was detectedT DGL(RCH)Deglitch time for battery recharge detection65ms PACK INSERTION AND PACK TEMPERATURE FAULT DETECTION,V(VTSBIAS)>2VK THOT Pack hot temperature detection constant Pack hot temp detected and charge suspended at V(TS)<V(2V2)×K THOT0.1890.2030.222K TCOLD Pack cold temperature detection constant Pack cold temp detected and charge suspended at V(TS)>V(2V2)×K TCOLD0.6100.6250.641K NOPACK Pack not detected threshold V(TS)>V(2V2)×K NOPACK0.9350.950.965T DGLTEMP Pack temperature fault/no fault detection deglitch15msT DGL(DT)Pack insertion detection deglitch10msT DLY(NDT)Pack removal detection delay100µsR DSTSBIAS Integrated switch resistance Measured from VTSBIAS to V2V2210ΩI TS(DET)TS pin bias current VTSBIAS to V2V2switch open–1µA CHARGER INTEGRATED MOSFET CHARACTERISTICSV BATDODCH Battery Switch dropout voltage,discharge or charge V BATDODCH=V(VIN_CHG)–V(BAT),V(BAT):3V,I(BAT)=–1A100200mVON at battery not detected and discharge switch enabled via I2CI DCH(BAT)BAT pin discharge current510mA(BATDCH=HI),V(BAT)>1VCHARGER PROTECTION AND RECOVERY FUNCTIONSBATCHG switch set to OFF ifV SH(VIN_CHG)VIN_CHG Short Circuit detection threshold 1.0 1.2 1.4VV(VIN_CHG)<V SH(VIN_CHG)V SH(BAT)BAT Short Circuit detection threshold BATCHG switch set to OFF if V(BAT)<V SH(BAT) 1.6 1.8 2.0VR SH(BAT)BAT short circuit recovery pull-up resistor V(BAT)<V SH(BAT),Internal resistor connected between VIN_CHG and BAT21kΩSafety timer value,thermal and DPPM loops not active or DTC function Selectable via I2C:4,5,6,8hoursdisabled hoursT CHG Charge safety timerTotal accuracy–15%15%TPCH=LO253035Pre charge timer range,thermal and DPPMT PRECHG Precharge timer minloops not active or DTC function disabled TPCH=HI506070Internal resistor connected from VIN_CHG to BAT when timer fault isR TMR(FLT)Timer fault recovery pull-up resistor1kΩdetectedT STRCHG Charger thermal loop threshold Charge current reduced for T J>T STRCHG125°C10Submit Documentation Feedback Electrical Specifications分销商库存信息:TITPS658620ZQZR TPS658620ZQZT。

富士通ETERNUS LT60数据手册说明书

DATASHEET FUJITSU ETERNUS LT60Page 1 / 5/eternus_ltDATASHEETFUJITSU ETERNUS LT60RELIABLE TAPE SOLUTIONThe ETERNUS LT60 from Fujitsu is a highly reliable and scalable tape library that is optimized to dramatically reduce the risk of manual errors in remote backups.It is an ultra compact tape library with up to 48 media slots and up to four drives on four height units. Depending on your individual requirements, you can either order it with an LTO-3*¹, LTO-4 or LTO-5 half height / full height drive, and can connect it to the server via the SAS (Serial Attached SCSI) or Fibre Channel interface.The library offers a maximum compressed storage capacity of 144 TB when equipped with 48 LTO-5 cartridges.The ETERNUS LT60 uses the most current, future-proof standard for high data transfer rates and uninterruptible transmission.The base configuration includes 24 slots. Because all 48 slots are already built in the other 24 slots can be easily activated via a software license.Like all products from Fujitsu designed for small and medium sized companies, the ETERNUS LT60 is reliable, easy to use and affordable.*¹LTO-3 only with half height drives availableFEATURES AND BENEFITS⏹ Upgradeability from 24 to 36/48 slots via software license⏹ Environmentally friendly design⏹ LTO-3 / LTO-4 / LTO-5 HH or LTO-4 / LTO-5 FH SAS technology⏹ LTO-4 HH drive with optional Fibre Channel interface⏹ Partitioning via license key⏹ Easy upgradeability of the needed storage capacity ⏹ High investment protection⏹ Environmentally friendly over its entire lifecycle: Acquisition, running costs, right through to disposal⏹ Future-proof, fault-tolerant, robust ⏹ High data throughput⏹ Redundancy (up to four HH drive or up to two FH drive possible)⏹ Build up two independent libraries out of one systemMANY EXTRAS AT NO EXTRA COST:⏹ Mailslots⏹ Barcode reader⏹ Remote management utility and user friendly operator panel⏹ Easy input and output of up to three cartridges⏹ Simplified media management⏹ Short initialization time thanks to slot barcodes, also with unoccupied data slots⏹ Easy administration, enables configuration and diagnostic⏹ Automatism help to decrease the error rate of backup processes ⏹ Ethernet network for Firmware upgrades, statisticsTECHNICAL DETAILSBandwidth ½ inch*Note As used for storage capacity, one gigabyte (GB) = one billion bytes,and one terabyte (TB) = one trillion bytes.Assuming a compression factor of 2(The compression factor depends on the data structure and is typically 2 or less.) **Note Uncompressed at nominal capacity.CLIMATIC CONDITIONSOperating rangeTemperature 10 - 35 °CRel. humidity 20 - 80 %Air quality The library should be placed in an area with minimal sources of particulate contamination. Avoid areas nearfrequently used doors and walkways, stacks of supplies that collect dust, printers, and smoke-filled rooms.Excessive dust and debris can damage tapes and drive.ELECTRICAL SPECIFICATIONSPower voltage 85 - 264 V (± 5%)Power frequency 50/60 Hz (± 5%)Typical power consumption (Watt)***Note loaded / by 29 W for write/read no robotic moves;LTO-5 drive consumes almost 36% less in standby mode and 10% less in operation mode COMPLIANCEProduct safety UL60950-1, CSA6090-1, EN60950-1, IEC60950-1Electromagnetic Compatibility FCC Part-15 Class A, EN55022 Class A, EN55024, EN6100-3-2, EN61000-3-3CE certification Electromagnetic Compatibility Directive 2004/108/EC, Low Voltage Directive 2006/95/EC Environmental compliance RoHS compliant, WEEE compliantMAINTENANCE AND SUPPORT SERVICESRecommended Service Level 24x7 Onsite Service with 4h Response TimeAvailable Service Level /services/maintenance_support/hardware_services.htmlImportant Note For use with the MTC changers, only cartridges certified by Fujitsu with the label “Fujitsu - Preferred Quality” arpermitted.This product and the accessories (components/materials) released for it by Fujitsu comply with the protectiontargets of Emission Class A. In special cases, measures for reducing the electromagnetic interference on otherdevices may be necessary.CONTACTFUJITSU Technology Solutions Email:*********************.comWebsite: /eternus_lt 2010-12-01 CE-ENIn addition to Fujitsu ETERNUS LT60, Fujitsu provides a range of platform solutions. They combine reliable Fujitsu products with the best in services, know-how and worldwide partnerships. Dynamic Infrastructures With the Fujitsu Dynamic Infrastructures approach, Fujitsu offers a full portfolio of IT products, solutions and services, ranging from clients to datacenter solutions, Managed Infrastructure and Infrastructure as-a-Service. How much you benefit from Fujitsu technologies and services depends on the level of cooperation you choose. This takes ITflexibility and efficiency to the next level.Computing Products/global/services/computing/Software/software/Learn more about Fujitsu ETERNUS LT60, please contact your Fujitsu sales representative or Fujitsu Business partner, or visit our website. /eternus_lt All rights reserved, including intellectual property rights. Changes to technical data reserved. Delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner. For further information see /terms_of_use.htmlCopyright © Fujitsu Technology Solutions FUJITSU GREEN POLICY INNOVATION DISCLAIMER Fujitsu Green Policy Innovation is our worldwide project for reducing burdens on the environment. Using our global know-how, we aim to resolve issues of environmental energy efficiency through IT. Please find further information at / global/about/environment/Technical data are subject to modification and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner.。

三星ST60性能参数

存储及连接参数
照片格式
JPEG
数据接口
USB 2.0接口
视频接口
HDMI输出接口
附件及电源参数
电池
专用可充电锂电池
外观参数颜色银色,黑色尺寸90.9×56×16.5mm
其它参数
编辑模式
智能相册,智能过滤
2.7英寸
液晶屏像素
23万像素
曝光控制参数
性能参数
防抖功能
双重防抖
拍摄功能及滤镜
艺术滤镜,可创造出暗角、鱼眼等效果
附加功能
脸部识别,笑脸识别,眨眼识别,美颜模式,智能过滤
视频拍摄参数
视频拍摄功能
支持视频拍摄
视频格式
H.264编码
视频分辨率
1280×720@30fps
高清视频
支持高清视频功能
闪光灯参数
三星ST60性能参数
基本参数
型号
ST60
型号别称
TL105
上市时间
2010年,1月
相机类型
卡片数码相机
有效像素
1220万像素
变焦倍数
4倍光学变焦
操作模式
全自动
传感器类型
CCD传感器
镜头参数
等效焦距
27.5-110mm
起始焦距
27.5mm
对焦方式
支持物体追踪对焦
光圈范围
最大光圈F3.2
屏幕参数
液晶屏尺寸

贝尔RX65说明书

`贝尔RX65多功能探测器使用说明书前言贝尔RX65 Pro是贝尔公司已生产的最高级雷达、激光、安全警示雷达（SWS）探测器。

RX65具有以下能力：探测波段涵盖X、K、超宽Ka、以及SWS雷达信号，前、后置激光探测，具备优良的数字信号处理能力，减少误报，自由的静音和自动静音技术，可视可听的频段警报，这些都符合您对贝尔产品的期望。

另外，RX65还增加了以下新的特征：1、优良的的宽频雷达和激光探测，包括新的POP警报；2、为您定制的7种功能；3、自动探测模式大幅降低误报，增加高速公路和城市模式；4、高亮度数字显示屏（280LED）；5、高级的警报追踪功能，显示多重雷达信号以及信号强度；6、以实际数字显示雷达频率；7、新的波段定制功能，包括国际和北美设置；8、侦测并破译公共安全警示雷达系统（SWS）信息；9、包括一条智能电源连线。

在您使用之前，请阅读4-5页的快速指南，程序设置见12-13页，可以简单的解释这些新功能，如果这是您的第一台探测器，请仔细阅读说明书，以确保您的RX65发挥其特长。

请安全驾驶快速指南卡有7种程序可供选择，所以您可以定制自己需要的程序标有CITY和BRT的键也用于程序定制，REVIEW（RVW）可回顾您当前的程序设置，按CHANGE（CHG）设置您想要的程序。

PROGRAM、RVW以及CHG等字样标注在探测器的顶端，并可以显示在显示屏上。

一、如何使用编程：1、同时按下CITY和BRT键2秒钟可以进入编程菜单（探测器发出“嘟嘟”两声，屏幕显示“Program”字样）；2、然后按RVW以显示当前的设置（您可以连续轻按以依次挑选，也可以按住按钮以连续显示程序）；3、按CHG可以改变程序设置（您可以连续轻按以依次挑选，也可以按住按钮以连续显示程序）；4、等待8秒钟不按任何按钮或者按下PWR可以退出编程（此操作完成，发出“嘟”声返回待机状态。

出厂设置：欲恢复出厂设置，在接通电源时，同时按住CITY和BRT键，RX65会显示一个“Reset”信息，随着一声警报，RX65恢复至出厂设置。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

10µs COLLECTOR CURRENT : IC (A)
100
80
10 100µs 1
60
40
0.1 Tc=25℃ Single Pulse 0.01 1 10 100 1000 COLLECTOR TO EMITTER VOLTAGE : VCE (V)
20
Tj≦175℃ VGE=15V
0 0 200 400 600 800 COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Tj=175℃
VGE=20V
VGE=15V
VGE=12V 60
60
VGE=10V
45
45
VGE=10V
30 VGE=8V 15
30 VGE=8V 15
0 0 1 2 3 4 5 COLLECTOR TO EMITTER VOLTAGE : VCE (V)
0 0 1 2 3 4 5 COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Datasheet
Unit Max.
V
ns
Diode Peak Reverse Recovery Current Diode Reverse Recovery Charge
Irr
A
Qrr
μC
Diode Reverse Recovery Time
trr
IF = 20A VCC = 400V diF/dt = 200A/μs Tj = 175℃ -
Fig.3 FORWARD BIAS SAFE OPERATING AREA
90 Tj=25℃ 75 COLLECTOR CURRENT : IC (A) VGE=20V VGE=15V VGE=12V COLLECTOR CURRENT : IC (A) 75 90
Fig.4 REVERSE BIAS SAFE OPERATING AREA
Fig.5 TYPICAL OUTPUT CHARACTERISTICS
Fig.6 TYPICAL OUTPUT CHARACTERISTICS
© 2014 ROHM Co., Ltd. All rights reserved.
5/9
2014.02 - Rev.A
RGT60TS65D
VGE(th)
VCE = 5V, IC = 21.0mA IC = 30A, VGE = 15V
5.0
6.0
7.0Saturation Voltage
VCE(sat)
Tj = 25℃ Tj = 175℃
-
1.65 2.15
2.1 -
V
© 2014 ROHM Co., Ltd. All rights reserved.
236
-
ns
Diode Peak Reverse Recovery Current Diode Reverse Recovery Charge
Irr
10.7
-
A
Qrr
1.36
-
μC
© 2014 ROHM Co., Ltd. All rights reserved.
4/9
2014.02 - Rev.A
RGT60TS65D
Absolute Maximum Ratings (at TC = 25℃ unless otherwise specified) Parameter Collector - Emitter Voltage Gate - Emitter Voltage Collector Current Pulsed Collector Current Diode Forward Current Diode Pulsed Forward Current Power Dissipation Operating Junction Temperature Storage Temperature *1 Pulse width limited by Tjmax. © 2014 ROHM Co., Ltd. All rights reserved. 1/9 2014.02 - Rev.A TC = 25℃ TC = 100℃ TC = 25℃ TC = 100℃ TC = 25℃ TC = 100℃ Symbol VCES VGES IC IC ICP
RGT60TS65D
650V 30A Field Stop Trench IGBT
Outline
Datasheet
VCES IC (100℃) VCE(sat) (Typ.) PD
Features
650V 30A 1.65V 194W
TO-247
(1)(2)(3)
Inner Circuit
(2) *1 (1)
2/9
2014.02 - Rev.A
RGT60TS65D
IGBT Electrical Characteristics (at Tj = 25℃ unless otherwise specified) Values Parameter Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate - Emitter Charge Gate - Collector Charge Turn - on Delay Time Rise Time Turn - off Delay Time Fall Time Turn - on Delay Time Rise Time Turn - off Delay Time Fall Time Symbol Cies Coes Cres Qg Qge Qgc td(on) tr td(off) tf td(on) tr td(off) tf Conditions Min. VCE = 30V VGE = 0V f = 1MHz VCE = 300V IC = 30A VGE = 15V IC = 30A, VCC = 400V VGE = 15V, RG = 10Ω Tj = 25℃ Inductive Load IC = 30A, VCC = 400V VGE = 15V, RG = 10Ω Tj = 175℃ Inductive Load IC = 90A, VCC = 520V Reverse Bias Safe Operating Area RBSOA VP = 650V, VGE = 15V RG = 50Ω, Tj = 175℃ VCC ≦ 360V Short Circuit Withstand Time tsc VGE = 15V Tj = 25℃ 5 FULL SQUARE Typ. 1730 72 29 58 15 20 29 40 100 60 29 41 113 105
1
0 25 50 75 100 125 150 175 JUNCTION TEMPERATURE : Tj (℃)
Fig.7 TYPICAL TRANSFER CHARACTERISTICS
20 COLLECTOR TO EMITTER SATURATION VOLTAGE : VCE(sat) (V) COLLECTOR TO EMITTER SATURATION VOLTAGE : VCE(sat) (V) Tj=25℃ 20
Datasheet
Unit Max. 0.77 2.00 ℃/W ℃/W
IGBT Electrical Characteristics (at Tj = 25℃ unless otherwise specified) Values Parameter Symbol Conditions Min. Collector - Emitter Breakdown Voltage BVCES IC = 10μA, VGE = 0V 650 Typ. Max. V Unit
60 VCE=10V 50 4 VGE=15V
Datasheet
COLLECTOR TO EMITTER SATURATION VOLTAGE : VCE(sat) (V)
IC=60A 3
COLLECTOR CURRENT : IC (A)
40
IC=30A 2 IC=15A
30
20 Tj=175℃ 10 Tj=25℃ 0 0 2 4 6 8 10 12 GATE TO EMITTER VOLTAGE : VGE (V)
Datasheet
40
30
20
150
175
CASE TEMPERATURE : TC (℃)
Fig.1 POWER DISSIPATION vs. CASE TEMPERATURE
1000 120
Fig.2 COLLECTOR CURRENT vs. CASE TEMPERATURE
100 COLLECTOR CURRENT : IC (A)
*1
Value 650 ±30 55 30 90 40 20 90 194 97 -40 ~ +175 -55 ~ +175
Unit V V A A A A A A W W ℃ ℃
IF IF IFP*1 PD PD Tj Tstg
RGT60TS65D
Thermal Resistance Values Parameter Thermal Resistance IGBT Junction - Case Thermal Resistance Diode Junction - Case Symbol Min. Rθ(j-c) Rθ(j-c) Typ. -
(1) Gate (2) Collector (3) Emitter *1 Built in FRD
(3)
Packaging Specifications Packaging Reel Size (mm) Tape Width (mm) Basic Ordering Unit (pcs) Taping Code Marking Tube 450 C11