TRGT-HL-PTCL-03055-US-STOOL OR BAR STOOL-V10

measure CPSD-HL-01057-
MTHD / Visual CPSD-HL-01057-
MTHD / Visual CPSD-HL-01057-
MTHD / Visual CPSD-HL-01057-
MTHD / Visual CPSD-HL-01057-
MTHD / Visual CPSD-HL-01057-
MTHD / Visual
CPSD-HL-01057MTHD / Visual
All
As claimed
Report overall dimensions; shall meet label claims
1
(If applicable) (-0% / +5%).
Report overall height; shall meet label claims
STOOL OR BAR STOOL (V10)
Evaluation
* 16 CFR 1303 Lead content
FLAMMABILITY Flammability of solids
PHYSICAL CHARACTERISTICS Type of seat Dimensions - seat
All
- Report each packaging claim. - Each claim shall be evaluated in accordance with the cited
procedure.
Law label
CPSD-HL-01057MTHD / Visual
All
Must be included if it contains filling material
Shall have no loose component and unsecured fastening where rigidity is required
Welds shall be smoothly ground and free of pits and splatter
PERFORMANCE Actual use - functionality - not covered by other tests Seating - seat static load
*
Packaged product transit testing - if applicable
All samples shall be reviewed and tested to the appropriate
TRGT-HL-PTCL-09000US
-
requirements of protocol TRGT-HL-9000-US "Packaged Product Transit Testing".
Shall present uniform adhesion (wood)
Shall present no scratches, dents, cracks, marred or discolored surface
Shall have finished edges
Shall present proper and even adhesion
Shall have no burrs or sharp edges on any component
Shall have no components missing, malformed or fractured
Defects
CPSD-HL-01057MTHD / Visual
Shall have no hardware missing All
TARGET CORPORATION TEST PROTOCOL FOR TRGT - 03055 - US
STOOL OR BAR STOOL (V10)
BV Lab Number: Technician Name:
Test Date: Reviewed By/Date:
DPCI#:
Page 1 of 5
* Loading test - footrest
Seating - impact durability - single seater for seat height up to 29 in. Tilt resistance
Seating - back pull durability
Stability
CPSD-HL-01057MTHD / Visual
CPSD-HL-01056MTHD / Standard
measure CPSD-HL-01056MTHD / Standard
measure CPSD-HL-01057-
MTHD / Visual CPSD-HL-01056MTHD / Standard
All
Shall conform to claimed features
All
Shall conform to claimed features
All
Shall conform to claimed features
All
Components shall be even in color
BV Lab Number: Technician Name:
follow
Accuracy or adequacy of instructions layout
MTHD / Visual / CPSDHL-01058-MTHD /
1
Actual use
ANALYTICAL
TARGET CORPORATION TEST PROTOCOL FOR TRGT - 03055 - US
1
(If applicable) (-0% / +5%).
All
As claimed
Report overall density; shall meet label claims
1
(If applicable) (-0% / +5%).
All
As claimed
All
As claimed
All
Shall conform to claimed features
Test Date: Reviewed By/Date:
DPCI#:
Results
C: R: C: R:
C: R C: R: C: R: C: R C: R C: R C: R C: R C: R
Page 2 of 5 Rating
TARGET CORPORATION TEST PROTOCOL FOR TRGT - 03055 - US
All samples shall be reviewed against the requirements of
* California Proposition 65
TRGT-HL-PTCL-06572US
-
California Proposition 65 to determine if additional testing or labeling is required.
Target packaging and labeling requirements
Products in final retail packaging or open stock shall be
TRGT-HL-PTCL-09067US
-
evaluated to the Target Packaging and Labeling Requirements Protocol
*
Law label - bedding tag and California flammability tag
TRGT-GB-PTCL01990-US
Please See and Include the Supplemental Test Protocol of 1990
-
Law Label (Bedding Tag and California Flammability Label
Citation / Method
Consumer Product Safety Improvement Act of 2008 / 16 CFR 1303 / AOAC 974.02 (mod) /
CPSD-AN-00001MTHD
No. of Samples
1
Criteria
Shall not exceed 90 ppm (0.009% by weight) total lead. Compositing is allowed as follows:
Dimensions - height - seat Fabric type - seat Foam density - seat Type of backrest Leg type Leg height adjustment Type of seat - rotating or non-rotating Back - with or without Arm - with or without arm WORKMANSHIP Defects - material
- Lead in Surface Coating Requirement = 90 ppm - Max. = 2 materials - Must meet 45 ppm due to composite concentration
16 CFR 1500.44
1
Shall meet < 0.1 inches per second (horizontal burning).
STOOL OR BAR STOOL (V10)
BV Lab Number: Technician Name: