三星15M规格书
产品物料规格书标准模板
物料规格书一、物料Fra bibliotek本讯息： 料号
品名规格 使用机种 供应商名称 图纸编号 二、其它基本规格： 1. 材质 材质：Al 1100-H14； 2. 顏色 顏色：银色； 3. 尺寸 尺寸需符合图纸 QZ0701A-013 的要求； □4. 印刷 □5. 电气规格 □6. 其它
表面来料须清洁、无毛刺、污渍、异点、伤痕氧化、生 目视 / ★ /
锈、发黑、电镀等不良；
包装良好、标示清楚（料号、品名、环保标签、生产日
点数 ★ /
/
期）数量正确；
□无
有：如样品(存放于样品柜)
备注 1 次/每季度 10pcs/每批
抽样计划 10PCS/每批
Ⅱ类 50PCS/每批
Ⅱ类 Ⅱ类
五、变更履历： 版本号
试
材质、颜色、结构对比样品；
目视 ★ / /
尺寸需符合图纸公差要求；
目视/ ★/ /
量具
与红光头面壳装配良品，定位孔对齐、表面平整、无毛
组装 ★ /
/
刺、油污等；
外观检查定位孔对齐、表面平整、无毛刺、油污等； 目视 / ★ /
平整度检查:将铝片放置平整模板上用手按至一端不动
目测 ★ /
/
且无缝隙为 OK.(备注:变形.弯曲.缝隙 NG)
文件编号 版次 附件 供应商代号 样品试用记录表
/ / /
三、检验要求（抽样计划：ISO 2859-1 正常单次Ⅱ类；AQL：MAJ-0.65，MIN-1.5，C=0）：
NO 1 2 3 4 5 6 7 8 四、样品：
AE电阻规格书
16Ultra-Precision Resistor (Transfer Molded)Composition of Type NumberMA Y 10K000 AResistance Value TypeExample:TCR ToleranceConfigurationLW 1WW 2L1dFT0.65±0.057.9±0.28.3±0.28.0±0.21.0 max.0.3 max.MC2.3±0.25.08±0.25MA2.8±0.23.81±0.2525±10MB 13.0±0.31.5 max.0.5 max.10.0±0.39.5±0.34.0±0.37.5±0.5MD 7.4±0.20.8 max.0.4 max.6.0±0.25.7±0.22.3±0.25.08±0.2510±3Dimensions in mmL L 1W W 1W 2T F dType TCR, Resistance Range, Tolerance, Rated PowerTypeMA MCMBMDTCR (ppm/°C)-55°C to +125°C0±15 (W)0±5 (X)0±5 (X)0±2.5 (Y)0±1 (Z)**0±5 (X)0±2.5 (Y)0±1 (Z)**0±5 (X)0±2.5 (Y)0±1 (Z)**0±5 (X)0±5 (X)0±5 (X)0±2.5 (Y)Resistance Range (⍀)1 to 55 to 3030 to 200k 5 to 3030 to 400k 5 to 3030 to 100100 to 80kResistance Tolerance (%)*±0.5 (D) ±1 (F)±0.005 (V) ±0.01 (T)±0.02 (Q) ±0.05 (A)±0.1 (B) ±0.5 (D) ±1 (F)±0.005 (V) ±0.01 (T)±0.02 (Q) ±0.05 (A)±0.05 (A) ±0.1 (B)±0.5 (D) ±1 (F)±0.1 (B) ±0.5 (D) ±1 (F)±0.01 (T) ±0.02 (Q)±0.05 (A) ±0.1 (B)±0.5 (D) ±1 (F)±0.1 (B) ±0.5 (D) ±1 (F)±0.1 (B) ±0.5 (D) ±1 (F)±0.1 (B) ±0.5 (D) ±1 (F)Rated Power (W)at 125°C 0.1250.50.3 at 200k ⍀or above0.30.2 at 150k ⍀or aboveSymbols in parentheses are for type number composition.*Resistance figures are the values obtained by measuring the leads at point 12.7±3.2mm away from the base for Type MA and at point 5.0±1.0mm for Types MC, MB and MD, but, in case of resistance below 10 ohm, the value at 1.6±0.6mm away from the base for all types.**Temperature characteristic Z is applicable for temperature range between 0°C and 60°C.Power Derating CurveAmbient TemperatureR a t e d P o w e r P e r c e n t a g e2550757010020015010050(%)(ЊC)175125150Resistance value, in ohm, is expressed by a series of six characters, five of which represent significant digits. The sixth R or K is a dual-purpose letter that designates both the value range (R for ohmic; K for k ilo-ohm) and the location of decimal point.MAMBMDMCDSCC Specifications97009970109701117PerformanceParametersTest Condition ALPHA Typical Test DataMaximum Rated Operating Temperature Working Temperature Range Maximum Working Voltage Power Conditioning Thermal Shock OverloadLifeLife 70°C Power Rating High Temperature Exposure SolderabilityResistance to Solvents Low Temperature Storage Low Temperature Operation Terminal StrengthDielectric Withstanding Voltage Insulation ResistanceResistance to Soldering Heat Moisture Resistance Storage LifeCurrent NoiseVoltage Coefficient Thermal EMFShock (Specified Pulse)Vibration, High Frequency 125°C-65°C to +175°CMA=MC=300V, MB=350V, MD=250VMIL-PRF-55182/9 Specification ±0.05%±0.05%±0.02%±0.01%±0.02%±0.02%over 10,000M ⍀±0.02%±0.05%±(0.20%+0.01⍀)±0.05%±0.05%±0.05%±0.05%±0.005%±0.5%over 95% coverageno damage-32dB 0.0005%/V 1.0V/°C±0.0025%±0.0025%±0.0025%±0.0025%±0.0025%±0.0025%over 10,000M ⍀±0.0025%±0.01%±0.005%±0.005%±0.005%±0.015%±0.015%±0.0025%±0.015 %over 95% coverageno damage-42dB 0.00003%/V 0.1V/°CType MA meets requirements of MIL-PRF-55182/9.Steam Aging 8 hrs., 245°C, 5 sec.1 lsopropyl Alcohol + Mineral Spirits2 Water + Butyl Cellosolve + Monoethanolamine 125°C, Rated Power, 100 hrs.-65°C/30 min. +150°C/30 min., 5 cycles Rated Power x 6.25, 5 sec.100G, 6ms, Sawtooth Wave, X, Y, each 10 shocks20G, 10Hz to 2,000Hz to 10Hz, 20min., X, Y, each 4 hrs.125°C, Rated Voltage, 1.5 hr. – ON, 0.5 hr. – OFF, 2,000 hrs.70°C, Rated Voltage x 2, 1.5 hr. – ON, 0.5 hr. – OFF, 2,000 hrs.15°C to 35°C, 15% RH to 75% RH, No Load, 10,000 hrs.175°C, No Load, 2,000 hrs.-65°C, 24 hrs.-65°C, Rated Voltage, 45 min.0.908kg (2 pounds), 10 sec.Atmospheric: 300V rms. Barometric: 200V rms.DC 100V, 2 min.+260°C, 10 sec.+65°C to -10°C, 90% RH to 98% RH, Rated Voltage, 10 cycles (240 hrs.)Frequency Characteristics 110100FrequencyR(A C )/R (D C ) 15010050(MHz)(%)100⍀50⍀1k ⍀10k ⍀50k ⍀MA, MC10020060705040302010300400500600700Applied Power⌬T (¡C)(mW)MA, MC Surface of Resistive Element MB Surface of Resistive Element MD Surface of Resistive ElementMA, MC, MD Surface of Molded Epoxy MB Surface of Molded EpoxyTe m p e r a t u r e R i s e MA, MC MBMDR ⍜ = 0.12¡C/mWR ⍜ = 0.09¡C/mW R ⍜ = 0.11¡C/mW Temperature of Resistor Surface。
用户需求书
一、项目概况1、项目名称：局办应急平台信息设备项目备注：一、55寸液晶超窄边拼接显示墙标底参数祥见附表1二、主要设备性能指标祥见附表2三、免费安装、调试并含辅料祥见附表3（DID专用线缆、DVI线、75-5线、电源线、VGA线、网线、线槽、接头、电源插座、桌插、地插、钢架、吊架、机柜、音频线等）二.投标人资格要求（“★”标记的为重要指标或性能参数，投标人有一项不符合，将视为无效报价）★1.在中华人民共和国境内依法注册（注册资金不低于200万）、具有本次招标物资生产供应经验的合格生产商或其授权的代理商。
★2.供应商取得液晶拼接屏及系统终端的设备制造商出具的针对此项目的原厂授权代理证明文件和服务承诺函,详细施工方案。
★3.具备铁路、系统集成、办公设备供货及长期维护经历。
三、一般要求1、项目含设备的供应和包装、运输、安装调试、人员培训、售后服务等。
2、设备必须是全新的、符合国家有关质量标准、满足项目使用性能要求。
3、设备应包括必备的技术图纸资料（如配置、使用说明书、结构图纸等），提供产品合格证书。
四、安装调试要求1、设备供应商工程师现场安装、调试。
2、应最终使用单位要求提供免费技术培训。
3、设备供应商负责免费安装、调试并含辅料五、售后服务要求成交供应商应提供设备及系统维护资料，一年内执行原厂商免费现场保修服务，提供7×24小时故障响应，维修人员须故障响应时间≤0.5小时，接到用户故障报修电话1小时内赶到现场并及时进行处理，2小时内使应用系统恢复正常。
（“★”标记的为重要指标或性能参数，投标人有一项不符合，将视为无效报价）附表155寸液晶超窄边拼接显示墙标底参数附表2主要设备性能指标1、55寸DID液晶拼接显示单元1)产品资质要求：★具有国家强制性产品认证3C认证证书、国家认可的整机质量检测报告, 需提供原件。
2)技术特性²RoHS柔性（不含铅）；²高对比度，高亮度；²SPVA（超级图案垂直对准）模式；²宽视角（>178度）；²8毫秒高速响应；²接口1路HDMI、1路VGA、1路DVI、5路复合视频；²尺寸外观：1215.3mm³686.1mm³98.5mm；²边框厚度：双边5.7mm²WXGA（1920³1080像素）分辨率（16:9）²低功耗，待机时不高于2W3)内置液晶拼接控制器a)专门为液晶拼接显示单元而开发，集成了液晶驱动模块、液晶电源模块、图像拼接控制模块等多个液晶拼接单元专用的功能模块，采用独特的嵌入式结构设计，可接受各种图像信号源输入，直接驱动大尺寸液晶屏，并经分割、放大后，实时无失真地在各种大屏幕图像拼接墙体上显示。
三星电容规格书
三星电容规格书三星电容规格书是指描述三星电容器性能、特征和使用方法的文档。
该文档的目的是为用户提供关于使用和选择三星电容器的详细信息。
以下是一些常见的参考内容，包括电容器的基本概念、规格、参数、应用建议等。
1. 电容器的基本概念：电容器是一种能够存储电能的被动元件，由两个导体板（电极）和介质组成。
介质可以是电解质、陶瓷、聚合物等。
电容器的主要功能是存储、释放电荷以及滤波和耦合。
2. 电容器的规格说明：规格说明包括电容器的容量、额定电压、尺寸、温度特性等。
容量是电容器存储电荷的能力，通常以法拉(F)为单位。
额定电压是电容器能够承受的最大电压，过高的电压可能导致电容器损坏。
尺寸是指电容器的外观尺寸，通常以长度、宽度和高度表示。
温度特性是指电容器在不同温度下的电容值变化情况。
3. 电容器的参数：电容器的参数包括ESR（等效串联电阻）、ESL（等效串联电感）、Q值、ES（等效串联电阻）、DF（损耗因子）等。
ESR是电容器在交流电路中的等效串联电阻，通常以欧姆(Ω)为单位。
ESL是电容器电极之间的等效串联电感，通常以纳亨(νH)为单位。
Q值是电容器的品质因数，表示其内部损耗的程度。
ES是电容器的等效串联电阻，通常用于表示电容器的交流特性。
DF是电容器的损耗因子，表示电容器内部的能量损耗。
4. 电容器的应用建议：电容器广泛应用于各种电子设备和电路中，如电源管理、通信设备、储存器、调光器、电动机驱动器等。
对于不同的应用场景，选择合适的电容器非常重要。
一般来说，对于高频应用，陶瓷电容器是一个不错的选择；对于高容量和高温度应用，聚合物电容器是一个不错的选择；对于高电压和高频应用，铝电解电容器是一个不错的选择。
以上是关于三星电容器规格书的一些参考内容。
根据具体的产品型号和应用需求，还会有更多详细的规格和参数说明。
在选择和使用电容器时，用户应该仔细阅读和理解规格书，以确保正确选择和合理使用电容器，从而提高电路的性能和可靠性。
三星SAMSUNG ML1700系列,ML-1510,ML-1710,ML-1750激光打印机维修手册中文版
三星电子
维修手册 1-3
注意事项
1.3 静电敏感器件注意事项
某些半导体器件可能易于受到静电损伤 这些元件通常称为 静电敏感器件 ESD ESD 的典型实 例有 集成电路 场效应晶体管和半导体 芯片 元件 应当遵守下列方法 以减少由静电引起的元件 损坏事故
小心>>不可向底板或电路通电 并遵守所有其他安全注意事项 1 在即将安装半导体或配有半导体的组件之前 触摸已知的接地点 放掉身体上的静电 另外 应佩
提起脚时 可能产生静电 足以损坏 ESD
维修手册 1-4
三星电子
参考信息
2 参考信息
本章叙述适用于本培训手册的参考信息 包括工具表 缩写词表 该机型概况等等
2.1 故障排除工具
推荐使用下列工具 以便安全 顺利地排除本维修手册所述故障
DCU 诊断控制设备 标准 诊断三星电子有限公司供应的 激光打印机的测试设备
电或出现故障 如果出现这种情况 应立即关闭电源并从插座拔下电源插头 5 不可用湿手触摸电源插头 维修时 务必从插座拔下电源插头 不可用湿手插入或拔下插头 可能
会触电 6 插入或拔下电源插头时应小心 电源插头必须完全插入 否则 会因接触不良而导致起火 拔下电
源插头时 务必抓住插头来拔下插头 如果抓住电线并拉扯电线 会损坏电线 从而导致起火或触 电 7 保管好电源线 不可弯曲 扭或捆绑电源线 并且不可把其他东西置于电源线之上 同样 不可用 订书钉固定电源线 如果电源线损坏 会导致起火或触电 必须立即更换损坏的电源线 不可修理 损坏的部分并重复使用电源线 缠有塑料胶带的损坏部分会导致起火或触电 不可把化学药品洒到 电源线上 不可把杀虫剂洒到电源线 因电源线外皮较薄 不耐用 会导致起火或触电 8 检查电源插座和电源插头是否损坏 受压 开裂或起火 如果发现这些不足之处 应立即修理 搬 动本机时不可挤压或弄断电源插座和插头 9 打雷和打闪时小心 闪电会导致起火或电击 打雷时应拔下电源插头 当打雷和打闪时不可触摸电 缆和设备 10 避开潮湿或充满灰尘之处 不可在充满灰尘之处或在加湿器附近安装打印机 可能会起火 应用 干纤维把插头部分清理干净除去灰尘 如果水滴滴在布满灰尘之处 可能会起火 11 避免日光直射 不可把打印机安装在窗户附近 在窗户附近会受到日光直射 如果本机长时间受 日光照射 因本机内部温度升高 本机可能不能正常工作 可能导致起火 12 当本机发出烟雾 异味或噪声时应关闭电源并拔下插头 如果继续使用本机 可能会起火 13 不可在本机内部/外部插入钢件或金属件 不可把钢件或金属件插入通风口中 可能会触电
三星规格书(中文版)
ƚƚƚ
７．电容厚度编码：
3 = 0.30 עA = 0.65 עM = 1.15ע 5 = 0.50 עC = 0.85 עF = 1.25ע 8 = 0.80 עD = 1.00 עH = 1.60ע
I = 2.00ע J = 2.50ע L= 3.20ע
July 2006
MUTLAYER CERAMIC CAPACITORS
The specification and designs contained herein may be subject to change without notice.
QS 9000/ISO 9001
Registered by BSI to QS 9000 or ISO 9001 under BSI’s accreditation by UKAS for Certification. Registration NO : FM25309(2002. 2. 28)
6.Low ESL Capacitors
Packaging Specification
67
Reliability Test Condition
71
1.Appearance
2.Insulation Resistance
3.Withstanding Voltage
4.Capacitance
5.Q Factor / Tan Ҝ
Q = 1.25*ע V = 2.50*ע
８．电容内电极 ／ 端子 ／ 电镀编码：
Ａ＝常规产品 钯／银／镍屏蔽／锡 １００％ Ｎ＝常规产品 镍／铜／镍屏蔽／锡 １００％ Ｇ＝常规产品 铜／铜／镍屏蔽／锡 １００％ Ｌ＝低侧面产品 镍／铜／镍屏蔽／锡 １００％
三星钽电容规格书SCS系列
ESR ( ) +25 100KHz Max.
1.2 8.0 6.0 6.0 4.0 3.5 4.0 3.5 4.0 3.5 2.0 3.5 1.8 1.8 1.6 2.0 0.8 1.6 0.8 1.2 0.8 0.5 0.6 0.9 0.7 0.6 8.0 6.0 6.0 4.0 3.5 4.0 3.5 2.0 3.5 2.0 3.0 1.8 2.0 1.3 1.6 3.5 1.2 0.8 0.8 0.8 0.8 1.3 0.9 0.6 0.7 0.5 0.3
Dissipation Factor (Tan ) Leakage Current T 85 Rated Voltage(VR) 85 T 125 Category Voltage(V) Surge Voltage(V)
85 T 85 T 125
SCS Series 25.0 16.0 32.0 20.0 35.0 22.0 44.0 28.0
Precautions in using Tantalum Capacitors 4 Characteristics Explanation
Specifications
Capacitance
Range Tolerance 0.47 to 680 20%(M), 10%(K) Refer to Specification Refer to Specification 16.0 20.0 10.0 10.0 13.0 6.3 20.0 25.0 13.0 13.0 16.0 8.0 -55 to 125 SCN Series
三星电容规格书
三星电容规格书三星电容规格书是指三星集团所生产的电容器产品的详细规格说明书。
下面将为您介绍三星电容规格书中常见的内容。
一、产品介绍三星电容规格书的第一部分是产品的介绍。
这部分通常包括产品名称、型号、外观尺寸、重量等基本信息。
同时，还会介绍产品的应用领域，例如通信设备、电子产品、汽车电子、医疗设备等，并解释为什么该产品适用于该领域。
二、产品特性三星电容规格书的第二部分是产品的特性介绍。
这部分通常包括电容器的电气特性和机械特性。
电气特性包括容量、精度、短时升温性能、稳定性等参数的介绍。
机械特性则包括外观特征、封装形式、连接方式等信息。
此外，还会介绍产品的工作温度范围、湿度条件等环境要求。
三、性能曲线和测试方法三星电容规格书的第三部分是性能曲线和测试方法。
这部分通常会给出电容器在不同工作电压、频率下的电容值曲线图和电阻值曲线图，并解释测试方法和测试条件。
这样用户就可以根据自己的需求选择合适的电容器。
四、质量保证和可靠性三星电容规格书的第四部分是质量保证和可靠性的介绍。
这部分通常包括产品的质量认证情况，如ISO 9001认证、ISO 14001认证等。
同时还会介绍产品的可靠性指标，如寿命、抗震动、抗湿热等性能。
此外，还会介绍三星公司的技术和质量管理体系，以确保产品的可靠性和稳定性。
五、包装和运输三星电容规格书的最后一部分是产品的包装和运输说明。
这部分通常会介绍产品的包装方式、包装材料、包装数量等信息，以及产品的运输方式、运输温度范围等要求。
同时还会提供产品的标签和批次号等信息，方便用户在使用和追溯过程中进行识别。
总结通过三星电容规格书，用户可以了解三星电容器产品的各种规格和性能指标，以便根据自己的需求选择合适的产品。
对于使用三星电容器的客户来说，这份规格书是非常重要的参考资料，它能够帮助用户了解产品的特性、性能以及质量保证等方面的信息，从而使用户能够更好地使用和维护产品。
三星电容规格书
三星电容规格书1. 引言本规格书旨在介绍三星电容的详细规格和特性。
三星电容是一种高质量、可靠性强的电子元件，广泛应用于各种电路和设备中。
本文将从技术参数、材料特性、封装形式以及应用领域等方面对三星电容进行全面介绍。
2. 技术参数2.1 电容值三星电容提供多种不同的电容值，范围从几皮法到数百微法。
具体的电容值取决于产品型号和系列。
2.2 额定电压每个三星电容都有一个额定电压，表示其能够承受的最大工作电压。
额定电压可以从几伏到数百伏不等。
2.3 容差三星电容的容差指标表明了其实际值与标称值之间的允许偏差范围。
常见的容差包括±5%、±10%等。
2.4 工作温度范围三星电容适用于不同的工作温度范围，常见的工作温度范围包括-40℃至+85℃、-55℃至+125℃等。
2.5 极性部分三星电容是极性电容，需要按照正确的极性连接。
而非极性电容则不受极性限制。
3. 材料特性3.1 介质材料三星电容的介质材料通常采用高质量的聚合物或陶瓷材料。
这些材料具有良好的绝缘性能和稳定性，以确保电容的长期可靠运行。
3.2 极板材料三星电容的极板通常采用优质金属，如铝或钽。
这些金属具有良好的导电性和耐腐蚀性，以确保电容在工作中能够提供稳定可靠的电流传输。
3.3 封装材料三星电容的封装材料通常采用环保型塑料或金属外壳。
这些封装材料具有良好的机械强度和耐高温特性，以保护内部元件并提供稳定的外部连接。
4. 封装形式4.1 表面贴装型（SMD）三星电容可提供表面贴装型封装，方便在PCB上进行自动化焊接。
常见的封装形式有0805、1206、1210等，具体尺寸取决于电容的电容值和额定电压。
4.2 插件型三星电容也可提供插件型封装，适用于手工焊接或特殊应用场景。
插件型封装通常具有引脚，可直接插入PCB或插座中。
5. 应用领域5.1 通信设备三星电容广泛应用于各种通信设备，如手机、无线路由器、基站等。
其高质量和稳定性能确保了通信设备的可靠运行和优秀的信号传输质量。
三星SMT电容规格书
■INTRODUCTIONMLCC(Multilayer Ceramic Capacitor)is SMD(Surface Mounted Device)type capacitor that is used in wide ranges of capacitance.MLCC is paid more attentions than other capacitors due to the better frequency characteristics,higher reliability,higher withstanding voltage and so on.MLCC is made of many layers of ceramic and inner electrodes like sandwich.Pd was used for inner electrodes.But the price of Pd was skyrocketed and Pd was replaced by the BME(Base Metal Electrode),which reduced the total cost of MLCC.This inner electrode is connected to outer termination for surface mounting,which is composed of three layers,Cu or Ag layer,Ni plating layer,and SnPb or Sn plating layer.Most of MLCCs become Pb free by the environmental issue at present.MLCC is divided into two classes.Class I(C0G,etc)is the temperature compensating type.It hasa small TCC(Temperature Coefficient of Capacitance)and a better frequency performance.Therefore,it is used in RF applications such as cellular phone,tuner,and so on.Class II(X7R, X5R,Y5V,etc)is the high dielectric constant type,which is used in general electronic circuit.Especially high capacitance MLCC is replacing other capacitors(Tantalum and Aluminum capacitor)due to the low ESR(Equivalent Series Resistance)value.■FEATURE AND APPLICATION●Feature-Miniature Size-Wide Capacitance and Voltage Range-Highly Reliable Performance-Tape&Reel for Surface Mount Assembly-Low ESR-High Q at High Frequencies-Stable Temperature Dependence of Capacitance●Application-High Frequency Circuit(Tuner,VCO,PAM etc)-General Power Supply Circuit(SMPS etc)-DC-DC Converter-General Electronic Circuit■STRUCTURE■APPEARANCE AND DIMENSIONDIMENSION(mm)CODE EIA CODEL W T(MAX)BW 0302010.6±0.030.3±0.030.3±0.030.15±0.05050402 1.0±0.050.5±0.050.5±0.050.2+0.15/-0.1 100603 1.6±0.10.8±0.10.8±0.10.3±0.2210805 2.0±0.1 1.25±0.1 1.25±0.10.5+0.2/-0.3 311206 3.2±0.2 1.6±0.2 1.6±0.20.5+0.2/-0.3 321210 3.2±0.3 2.5±0.2 2.5±0.20.6±0.3431812 4.5±0.4 3.2±0.3 3.2±0.30.8±0.3552220 5.7±0.4 5.0±0.4 3.2±0.3 1.0±0.3■PREVIOUS PART NUMBERINGSymbol EIA Code TemperatureCoefficient(PPM/℃)※TemperatureCharacteristicsOperationTemperature RangeC C0G(CH)0±30C Δ-55~+125℃P P2H -150±60P ΔR R2H -220±60R ΔS S2H -330±60S ΔT T2H -470±60T ΔU U2J -750±120U ΔLS2L+350~-1000SL▶CLASS Ⅰ(Temperature Compensation)TemperatureCharacteristicsbelow 2.0pF 2.2~3.9pF above 4.0pFabove 10pFC ΔC0G C0G C0G C0G P Δ-P2J P2H P2H R Δ-R2J R2H R2H S Δ-S2J S2HS2H T Δ-T2J T2H T2H U Δ-U2JU2JU2JSymbol EIA Code Capacitance Change(ΔC :%)OperationTemperature RangeA X5R ±15-55~+85℃B X7R ±15-55~+125℃FY5V+22~-82-30~+85℃▶CLASS Ⅱ(High Dielectric Constant)SAMSUNG Multilayer Ceramic Capacitor Type(Size)Capacitance Temperature Characteristics Nominal Capacitance Capacitance Tolerance Rated Voltage Thickness Option Packaging Type CAPACITANCE TEMPERATURE CHARACTERISTICS ※Temperature Characteristics ☞K :±250PPM/℃J :±120PPM/℃H :±60PPM/℃G :±30PPM/℃●●●●●●●●●Temperature CharacteristicsSymbol Tolerance Applicable Capacitance &RangeC0G(NPO)or T.C SeriesB ±0.1pF 0.5~3pF C±0.25pF 0.5~10pF D ±0.5pF F ±1pF 6~10pFG ±2%E-24Series for over 10pF J ±5%K±10%A(X5R)B(X7R)J ±5%E-12SeriesK ±10%M ±20%F(Y5V)Z-20%~+80%E-6Series CAPACITANCE TOLERANCE The nominal capacitance value is expressed in pico-Farad(pF)and identified by three-digit number,first two digits represent significant figures and last digit specifies the number of zeros to follow.For values below 1pF,the letter "R"is used as the decimal point and the last digit becomes significant.example)100:10×10o =10pF 102:10×102=1000pF020:2×10o =2pF1R5:1.5pFNOMINAL CAPACITANCE ●●※Please consult us for special tolerances.RATED VOLTAGE ●PACKAGING TYPE THICKNESS OPTION Symbol Description of the CodeN Standard thickness (please refer to standard thickness table on next page)A Thinner than standard thickness B Thicker than standard thicknessC Standard Thickness High Q (Low `D.F `)D Sn-100%(High-Q)ESn-100%(General)※Please Consult us for other termination type.●●Series Capacitance StepE-3 1.02.24.7E-6 1.01.52.23.34.76.8E-12 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.88.2E-241.0 1.2 1.5 1.82.2 2.73.3 3.94.75.66.88.21.11.31.62.02.43.03.64.35.16.27.59.1※Standard Capacitance is "Each step ×10n "▶STANDARD CAPACITANCE STEP■NEW PART NUMBERING●PRODUCT ABBREVIATION Symbol Product AbbreviationCLSAMSUNG Multilayer Ceramic Capacitor●SIZE(mm)Symbol Size(mm)Length Width 030.60.305 1.00.510 1.60.821 2.0 1.231 3.2 1.632 3.2 2.543 4.5 3.2555.75.0SAMSUNG Multilayer Ceramic Capacitor Size(mm)Capacitance Temperature Characteristic Nominal Capacitance Capacitance Tolerance Rated Voltage Thickness Option Product &Plating Method Samsung Control Code Reserved For Future Use Packaging Type ●●●●●●●●●●●●CAPACITANCE TEMPERATURE CHARACTERISTICSymbol Temperature Characteristics Temperature RangeCClassⅠCOG C△0±30(ppm/℃)-55~+125℃P P2H P△-150±60R R2H R△-220±60S S2H S△-330±60T T2H T△-470±60U U2J U△-750±60L S2L S△+350~-1000AClassⅡX5R X5R±15%-55~+85℃B X7R X7R±15%-55~+125℃F Y5V Y5V+22~-82%-30~+85℃※Temperature CharacteristicTemperatureCharacteristicsBelow2.0pF 2.2~3.9pF Above4.0pF Above10pF CΔC0G C0G C0G C0GPΔ-P2J P2H P2HRΔ-R2J R2H R2HSΔ-S2J S2H S2HTΔ-T2J T2H T2HUΔ-U2J U2J U2JJ:±120PPM/℃,H:±60PPM/℃,G:±30PPM/℃●NOMINAL CAPACITANCENominal capacitance is identified by3digits.The first and second digits identify the first and second significant figures of the capacitance. The third digit identifies the multiplier.'R'identifies a decimal point.●ExampleSymbol Nominal Capacitance1R5 1.5pF10310,000pF,10nF,0.01μF104100,000pF,100nF,0.1μF●CAPACITANCE TOLERANCE Symbol Tolerance Nominal CapacitanceA ±0.05pF Less than 10pF (Including 10pF)B ±0.1pFC ±0.25pFD ±0.5pF F ±1pF F ±1%More than 10pF G ±2%J ±5%K ±10%M ±20%Z+80,-20%●RATEDVOLTAGE●THICKNESS OPTIONType Symbol Thickness(T)Spec 060330.30±0.03 100550.50±0.05 160880.80±0.102012A0.65±0.10 C0.85F 1.25±0.103216C0.85±0.15 F 1.25±0.15 H 1.6±0.203225F 1.25±0.20H 1.6I 2.0J 2.54532F 1.25±0.20H 1.6I 2.0J 2.5L 3.2±0.305750F 1.25±0.20H 1.6I 2.0J 2.5L 3.2±0.30●PRODUCT&PLATING METHODSymbol Electrode Termination Plating TypeA Pd Ag Sn_100%N Ni Cu Sn_100%G Cu Cu Sn_100%●SAMSUNG CONTROL CODE●RESERVED FOR FUTURE USESymbol Description of the codeN Reserved for future use●PACKAGING TYPE▶CAPACITANCE vs CHIP THICKNESS STANDARDDescription0603(0201)1005(0402)1608(0603)2012Type (0805)3216Type (1206)3225Type (1210)4532Type (1812)5750Type (2220)Dimension (mm)L0.6±0.03 1.0±0.05 1.6±0.1 2.0±0.13.2±0.153.2±0.2 3.2±0.34.5±0.45.7±0.4W 0.3±0.030.5±0.050.8±0.1 1.25±0.1 1.6±0.15 1.6±0.22.5±0.23.2±0.3 5.0±0.4T0.3±0.030.5~±0.050.8±0.10.65±0.10.85±0.11.25±0.10.85±0.15 1.25±0.15 1.6±0.21.25±0.2 1.6±0.22.0±0.22.5±0.21.25±0.21.6±0.22.0±0.22.5±0.21.6±0.22.0±0.22.5±0.2C A P ACIT A N CER A N G E (p F )SL 50V -0.5~2400.5~10000.5~10001100~15001600~27000.5~27003000~56006200~8200-----------C,TC (Except SL,UJ)25V 0.5~470.5~2200.5~1000--3300~82001500~36003900~68007500~10000-----100000-----50V -0.5~1800.5~10000.5~560620~10001100~33000.5~22002400~4700-560~1000011000~2200024000~47000-1000~1300015000~2200024000~4700062000~680004300093000130000C A P A C I T A N C E R A N G E (n F )A (X5R)6.3V 102202200--10000--10000---22000---47000--4700010V101001000--2200--4700~10000---22000------4700016V -47330~470--1000--4700---6800~10000-------25V --------------------50V- 6.8~10------------------B (X7R)6.3V 0.1~1047~100470~1000--1000--6800~10000---22000-------10V0.1~1033~100220~470220~270330~470560~1000-1000~330047001500~220033003900~4700----22000---16V0.1~110~33100~22068~200220~330390~1000330~6801000~15002200~33001500~220033003900~4700---2200----25V -4.7~1047~10039~6882~100150~470100~330470~620680~1000680~150018002200---1000---1000050V -0.22~4.70.22~1000.22~3947~1002201~150220390~1000 2.2~680820~1000--10~1000-----3300~4700F (Y5V)6.3V10~100-2200--10000-----47000--------10V -220~330100~1000--4700-470010000~22000---22000------10000016V -10~220100~100010~680820~10001200~22001000~22002700~4700100003300~68001000015000---22000----25V -10~3322~33010~220270~470560~1000470~10001200~22002700~33001000~33004700~10000-----10000---50V - 2.2~102.2~1002.2~6882~150180~100010~470560~1000-100~1000------10000---■PACKAGING●CARDBOARD PAPER TAPESymbol W F E P1P2P0D tABTypeD i m e n s i o n038.0±0.3 3.5±0.05 1.75±0.12.0±0.052.0±0.05 4.0±0.1Φ1.5+0.1/-00.37±0.030.38±0.030.68±0.03050.6±0.050.65+0.05/-0.1 1.15+0.05/-0.110 4.0±0.11.1MAX1.1±0.21.9±0.221 1.6±0.22.4±0.2312.0±0.23.6±0.2unit :mm●EMBOSSED PLASTIC TAPE●TAPING SIZE●REEL DIMENSIONSymbol A B CDEWtR7"Reel φ178±2.0min.φ50φ13±0.521±0.82.0±0.510±1.50.8±0.21.013"Reelφ330±2.0min.φ70unit :mmSymbol Cardboard Paper TapeEmbossed Plastic Tape7"Reel 4000200013"Reel15000-unit :pcsSize 05(0402)10(0603)21(0805)T ≤0.85mm T ≥1.0mm Quantity 50,00010,000~15,000*10,0005,000●BULK CASE PACKAGING-Bulk case packaging can reduce the stock space and transportation costs.-The bulk feeding system can increase the productivity.-It can eliminate the componentsloss.Symbol A B T C D E Dimension 6.8±0.18.8±0.112±0.1 1.5+0.1/-02+0/-0.14.7±0.1Symbol F W G H L I Dimension31.5+0.2/-036+0/-0.219±0.357±0.35110±0.75±0.35●QUANTITY*Option■CHARACTERISTIC MAP●CLASSⅠTemperature Characteristics Size VoltageCapacitance Range(㎊)SL,UJ05 (0402)50V10 (0603)50V21 (0805)50V31 (1206)50VC(COG)& TC Series03(0201)25V05(0402)25V50V10(0603)25V50V21(0805)25V50V31(1206)25V50V 32(1210)50V100V43(1812)25V50V55(2220)50V101001000100001000001000000100000001000000000.5240270082001000100010000150033004700100018022047820033001800047005604700068000100010000013000043000●CLASSⅡ,A(X5R)Temperature Characteristics Size Voltage Capacitance Range(㎊)A(X5R)0603(0201)6.3V10V1005(0402)6.3V10V16V50V1608(0603)6.3V10V16V2012(0805)6.3V10V16V3216(1206)6.3V10V16V3225(1210)6.3V10V16V4532(1812) 6.3V5750(2220)6.3V10V101001000100001000001000000100000001000000001000010000010000100000004700000220000002200000100000004700000220000004700000047000100006800100000022000001000000470000330000100000001000000068000004700000047000000220000●CLASSⅡ,B(X7R)Temperature Characteristics Size VoltageCapacitance Range(㎊)B(X7R)03(0201)6.3V10V16V05(0402)6.3V10V16V25V50V10(0603)6.3V10V16V25V50V21(0805)6.3V10V16V25V50V31(1206)6.3V10V16V 25V50V10100100010000100000100000010000000100000000100000470004700000470000100000100000047000022000010000003300000100000010000001001000010000000100000100000100100001001000680000033000100003300010000470047002204700002200002200001000004700022022000010000006800039000220100000033000010000010000001000●CLASSⅡ,B(X7R)Temperature Characteristics Size VoltageCapacitance Range(㎊)B(X7R)32(1210)6.3V10V16V25V50V43(1812)10V16V25V50V55(2220)25V50V1010010001000010000010000001000000010000000022000000100000010000470000015000002200000010000001000000047000003300000470000015000002200000680000100000022002200000●CLASSⅡ,F(Y5V)Temperature Characteristics Size VoltageCapacitance Range(㎊)F(Y5V)03(0201) 6.3V05(0402)10V16V25V50V10(0603)6.3V10V16V25V50V21(0805)6.3V10V16V25V50V31(1206)10V16V 25V50V32(1210)6.3V10V16V25V50V43(1812)16V25V50V55(2220)10V330000330001000022000010000220010000003300001000001000002200022001000000220000010000100002200000047000001000000033000001000000100000047000010000470000010000001500000033000001000000100000100000002200000010000220000100000001000000010000000022000001000000010000010000100000010000010000002200470000002200000010100100010000100000100000010000000100000000■RELIABILITY TEST DATANO ITEM PERFORMANCE TEST CONDITION 1APPEARANCE NO ABNORMAL EXTERIOR APPEARANCE THROUGH MICROSCOPE(×10)2INSULATIONRESISTANCE10,000㏁OR500㏁∙㎌PRODUCT WHICHEVER ISSMALLER(RATED VOLTAGE IS BELOW16V:10,000㏁OR100㏁∙㎌)RATED VOLTAGE SHALL BE APPLIED.MEASUREMENT TIME IS60~120RATED VOLTAGETIME60SEC.3WITHSTANDINGVOLTAGENO DIELECTRIC BREAKDOWN ORMECHANICAL BREAKDOWNCLASSⅠ:300%OF THE RATED VOLTAGE FOR1~5SEC,CLASSⅡ:250%OF THE RATED VOLTAGE FOR1~5SECIS APPLIED WITH LESS THAN50㎃CURRENT4CAPACITANCECLASSⅠWITHIN THE SPECIFIEDTOLERANCECAPACITANCE FREQUENCY VOLTAGE1,000㎊ANDBELOW1㎒±10%0.5~5VrmsMORE THAN1,000㎊1㎑±10%CLASSⅡWITHIN THE SPECIFIEDTOLERANCECAPACITANCE FREQUENCY VOLTAGE10㎌AND BELOW1㎑±10% 1.0±0.2VrmsMORE THAN10㎌120㎐±20%0.5±0.1Vrms5Q CLASSⅠOVER30㎊:Q≥1,000LESS THAN30㎊:Q≥400+20C(C:CAPACITANCE)CAPACITANCE FREQUENCY VOLTAGE1,000㎊ANDBELOW1㎒±10%0.5~5VrmsMORE THAN1,000㎊1㎑±10%6TanδCLASSⅡ1.CHAR:B2.CHAR:FCAPACITANCE FREQUENCY VOLTAGE10㎌AND BELOW1㎑±10% 1.0±0.2VrmsMORE THAN10㎌120㎐±20%0.5±0.1Vrms RATED VOLTAGE DF SPEC6.3V0.05max10V0.05max16V0.035max25V0.025max50V이상0.025max6.3V10V16V25V50V1005-0.125max0.09max(C＜220nF)0.125max(C≥220nF)0.05max0.05max16080.16max0.125max0.09max0.05max(C≤100nF)0.07max(C>100nF)0.05max20120.16max0.125max0.09max0.07max0.05max32160.16max0.125max0.09max0.07max0.05max32250.16max0.125max0.09max0.07max(C≤6.8㎌)0.09max(C>6.8㎌)0.05max45320.16max0.16max0.09max--57500.125max---*THE INITIAL VALUE OF HIGH DIELECTRIC CONSTANT SERIES SHALL BE MEASUREDAFTER THE HEAT TREATMENT OF150+0/-10℃,1Hr AND SITTING OF48±4hr AT ROOM TEMPERATURE&ROOM HUMIDITY.NO ITEM PERFORMANCE TEST CONDITION14HUMIDITY(STEADYSTATE)APPEARANCE NO MECHANICAL DAMAGE SHALL OCCUR TEMPERATURE:40±2℃RELATIVE HUMIDITY:90~95%RHTEST TIME:500+12/-0Hr.MEASURE AT ROOM TEMPERATUREAFTER COOLING FORCLASSⅠ:24±2Hr.CLASSⅡ:48±4Hr.CAPACITANCECHARACTERISTIC CAPACITANCE CHANGECLASSⅠWITHIN±5%OR±0.5㎊WHICHEVERIS LARGERCLASSⅡA,B WITHIN±12.5%F WITHIN±30%QCLASSⅠ30㎊AND OVER:Q≥35010~30㎊:Q≥275+2.5×CLESS THAN10pF:Q≥200+10×CTanδCLASSⅡINSULATIONRESISTANCEMINIMUM INSULATION RESISTANCE:1,000㏁OR50㏁∙㎌PRODUCT WHICHEVER ISSMALLER15MOISTURERESISTANCEAPPEARANCE NO MECHANICAL DAMAGE SHALL OCCUR APPLIED VOLTAGE:RATED VOLTAGETEMPERATURE:40±2℃RELATIVE HUMIDITY:90~95%RHTEST TIME:500+12/-0Hr.CURRENT APPLIED:50㎃MAX.<INITIAL MEASUREMENT>CLASSⅡSHOULD BE MEASUREDINITIAL VALUE AFTER BE HEAT-TREATEDFOR1HR IN150℃+0/-10℃AND BE LEFTFOR48±4HR AT ROOM TEMPERATURE.<LATTER MEASUREMENT>CLASSⅠSHOULD BE MEASURED AFTERLEFT FOR24±2HRS IN ROOMTEMPERATURE AND HUMIDITY.CLASSⅡSHOULD BE MEASUREDLATTER VALUE AFTER BEHEAT-TREATED FOR1HR IN150℃+0/-10℃AND BE LEFT FOR48±4HR AT ROOMTEMPERATURE.CAPACITANCECHARACTERISTIC CAPACITANCE CHANGECLASSⅠWITHIN±7.5%OR±0.75㎊WHICHEVERIS LARGERCLASSⅡA,B WITHIN±12.5%FWITHIN±30%WITHIN+30~－40%1005C>0.47μF1608C>1.0μF2012C>4.7μF3216C>10.0μF3225C>22.0μF4532C>47.0μFQCLASSⅠ30㎊AND OVER:Q≥20030㎊AND BELOW:Q≥100+10/3×CTanδCLASSⅡINSULATIONRESISTANCEMINIMUM INSULATION RESISTANCE:500㏁OR25㏁∙㎌PRODUCT,WHICHEVER IS SMALLER.CHAR.25VANDOVER16V10V 6.3V4VA,B0.050.05MAX0.05MAX0.075MAX0.1MAXF0.075MAX0.1MAX(C〈1.0㎌)0.125MAX(C≥1.0㎌)0.15MAX0.195MAX0.25MAXCHAR.25VANDOVER16V10V 6.3V4VA,B0.05MAX0.05MAX0.05MAX0.075MAX0.1MAXF0.075MAX0.1MAX(C〈1.0㎌)0.125MAX(C≥1.0㎌)0.15MAX0.195MAX0.25MAX6.3VTanδ0.125MAX*ConditionCLASSⅡ(A,B)1005C≥0.22㎌1608C≥2.2㎌2012C≥4.7㎌3216C≥10.0㎌3225C≥22.0㎌4532C≥47.0㎌5750C≥100.0㎌6.3V Tanδ0.125MAX*ConditionCLASSⅡ(A,B)1005C≥0.22㎌1608C≥2.2㎌2012C≥4.7㎌3216C≥10.0㎌3225C≥22.0㎌4532C≥47.0㎌5750C≥100.0㎌NO ITEM PERFORMANCE TEST CONDITION16HIGHTEMPERATURERESISTANCEAPPEARANCE NO MECHANICAL DAMAGE SHALL OCCURAPPLIED VOLTAGE:150%,200%OF RATED VOLTAGETEST TIME:1000+48/-0Hr.CURRENT APPLIED:50㎃MAX.<INITIAL MEASUREMENT>CLASSⅡSHOULD BE MEASURED INITIALVALUE AFTER BE HEAT-TREATED FOR1HR IN150℃+0/-10℃AND BE LEFT FOR48±4HR AT ROOM TEMPERATURE.<LATTER MEASUREMENT>CLASSⅠSHOULD BE MEASURED AFTERLEFT FOR24±2HRS IN ROOMTEMPERATURE AND HUMIDITY.CLASSⅡSHOULD BE MEASURED LATTERVALUE AFTER BE HEAT-TREATED FOR1HR IN150℃+0/-10℃AND BE LEFT FOR48±4HR AT ROOM TEMPERATURE.(TWICE OF RATED VOLTAGE WILL BEAPPLIED TO ALL SERIES BUT ABOVE)**HOWEVER,A/B는1005C≥0.22㎌SEE(FIG.3)CAPACITANCECHARACTERISTIC CAP.CHANGECLASSⅠWITHIN±3%OR±0.3㎊,WHICHEVER IS LARGERCLASSⅡA,B WITHIN±12.5%FWITHIN±30%WITHIN+30~40%1005C>0.47μF1608C>1.0μF2012C>4.7μF3216C>10.0μF3225C>22.0μF4532C>47.0μFQCLASSⅠ30㎊AND OVER:Q≥35010~30㎊:Q≥275+2.5×CLESS THAN10㎊:Q≥200+10×CTanδCLASSⅡINSULATIONRESISTANCEMINIMUM INSULATION RESISTANCE:1,000㏁OR50㏁∙㎌PRODUCTWHICHEVER IS SMALLER17TEMPERATURECYCLEAPPEARANCE NO MECHANICAL DAMAGE SHALL OCCUR CAPACITORS SHALL BE SUBJECTEDTO FIVE CYCLES OF THETEMPERATURE CYCLE AS FOLLOWINGSTEP TEMP.(℃)TIME(MIN)1MIN.RATEDTEMP.+0/-3302252~33MAX.RATEDTEMP.+3/-0304252~3MEASURE AT ROOM TEMPERATUREAFTER COOLING FORCLASSⅠ:24±2Hr.CLASSⅡ:48±4Hr.CAPACITANCECHARACTERISTIC CAP.CHANGECLASSⅠWITHIN±2.5%OR±0.25㎊WHICHEVER ISLARGERCLASSⅡA,B WITHIN±7.5%F WITHIN±20%QCLASSⅠ30㎊AND OVER:Q≥1000LESS THAN30㎊:Q≥400+20×CTanδCLASSⅡTO SATISFY THE SPECIFIEDINITIAL VALUEINSULATIONRESISTANCETO SATISFY THE SPECIFIEDINITIAL VALUECHAR.25VANDOVER16V10V 6.3V4VA,B0.05MAX0.05MAX0.05MAX0.075MAX0.1MAXF0.075MAX0.1MAX(C<1.0㎌)0.125MAX(C≥1.0㎌)0.15MAX0.195MAX0.25MAXCHAR.TEMP.CLASSⅠ125±3℃CLASSⅡA85±3℃B125±3℃F85±3℃*150%Authorization ConditionsCLASSⅡ(A,B,F)1005C>0.47μF1608C≥2.2㎌2012C≥4.7㎌3216C≥10.0㎌3225C≥22.0㎌4532C≥47.0㎌5750C≥100.0㎌■CHARACTERISTIC GRAPH▶CAPACITANCE CHANGE -AGING▶CAPACITANCE -DC VOLTAGE CHARACTERISTICS▶CAPACITANCE -TEMPERATURE CHARACTERISTICS●ELECTRICAL CHARACTERISTICS■APPLICATION MANUAL●Storage Condition▶Storage EnvironmentThe electrical characteristics of MLCCs were degraded by the environment of high temperature or humidity.Therefore,the MLCCs shall be stored in the ambient temperature and the relative humidity of less than40℃and70%,respectively.Guaranteed storage period is within6months from the outgoing date of delivery.▶Corrosive GasesSince the solderability of the end termination in MLCC was degraded by a chemical atmosphere such as chlorine,acid or sulfide gases,MLCCs must be avoid from these gases.▶Temperature FluctuationsSince dew condensation may occur by the differences in temperature when the MLCCs are taken out of storage,it is important to maintain the temperature-controlled environment.●Design of Land PatternWhen designing printed circuit boards,the shape and size of the lands must allow for theproper amount of solder on the capacitor.The amount of solder at the end terminations has a direct effect on the crack.The crack in MLCC will be easily occurred by the tensile stress which was due to too much amount of solder.In contrast,if too little solder is applied,the termination strength will be e the following illustrations as guidelines for proper land design.Recommendation of Land Shape and Size●AdhesivesWhen flow soldering the MLCCs,apply the adhesive in accordance with the following conditions.▶Requirements for AdhesivesThey must have enough adhesion,so that,the chips will not fall off or move during thehandling of the circuit board.They must maintain their adhesive strength when exposed to soldering temperature.They should not spread or run when applied to the circuit board.They should harden quickly.They should not corrode the circuit board or chip material.They should be a good insulator.They should be non-toxic,and not produce harmful gases,nor be harmful when touched.▶Application MethodIt is important to use the proper amount of adhesive.Too little and much adhesive will cause poor adhesion and overflow into the land,respectively.▶Adhesive hardening CharacteristicsTo prevent oxidation of the terminations,the adhesive must harden at160℃or less,within2minutes or less.●Mounting▶Mounting Head PressureExcessive pressure will cause crack to MLCCs.The pressure of nozzle will be300g maximum during mounting.▶Bending StressWhen double-sided circuit boards are used,MLCCs first are mounted and soldered onto one side of the board.When the MLCCs are mounted onto the other side,it is important to support the board as shown in the illustration.If the circuit board is not supported,the crack occur to the ready-installed MLCCs by the bending stress.●FluxAlthough the solderability increased by the highly-activated flux,increase of activity in flux may also degrade the insulation of the chip capacitors.To avoid such degradation,it is recommended that a mildly activated rosin flux(less than0.2%chlorine)be used.●SolderingSince a multilayer ceramic chip capacitor comes into direct contact with melted solder during soldering,it is exposed to potentially mechanical stress caused by the sudden temperature change.The capacitor may also be subject to silver migration,and to contamination by the flux.Because of these factors,soldering technique is critical.▶Soldering MethodsMethodClassificationReflow soldering-Overall heating-Infrared rays -Hot plate-VPS(vapor phase)-Local heating-Air heater -Laser-Light beamFlow soldering-Single wave -Double wave-*We recommend the reflow soldering method.▶Soldering ProfileTo avoid crack problem by sudden temperature change,follow the temperature profile in the adjacentgraph.30025020015010050℃Reflow Soldering 30025020015010050℃60~120sec 3~4secFlow Soldering▶Manual SolderingManual soldering can pose a great risk of creating thermal cracks in chip capacitors.The hotsoldering iron tip comes into direct contact with the end terminations,and operator's carelessnessmay cause the tip of the soldering iron to come into direct contact with the ceramic body of the capacitor.Therefore the soldering iron must be handled carefully,and close attention must be paid to the selection of the soldering iron tip and to temperature control of the tip.▶Amount ofSolder▶CoolingNatural cooling using air is recommended.If the chips are dipped into solvent for cleaning, the temperature difference(△T)must be less than100℃6-6.CleaningIf rosin flux is used,cleaning usually is unnecessary.When strongly activated flux is used, chlorine in the flux may dissolve into some types of cleaning fluids,thereby affecting the chip capacitors.This means that the cleaning fluid must be carefully selected,and should always be new.▶Notes for Separating Multiple,Shared PC Boards.A multi-PC board is separated into many individual circuit boards after soldering has been completed.If the board is bent or distorted at the time of separation,cracks may occur in the chip capacitors.Carefully choose a separation method that minimizes the bending of the circuit board.■CROSS REFERENCEP/N COMPANY SAMSUNG AVX JOHANSON KEMET KYOCERA MURATA NOVACAP PANASONIC ROHMTAIYO-YUDENTDK VITRAMON①COMPANY MODEL(MLCC)CL--C CM GRM-ECJ MCH MK C VJ②SIZE (EIA/JIS)0201(0603)03---0333-Z-0630603-0402(1005)050402R0704020536040201510510050402 0603(1608)100603R14060310539060311810716080603 0805(2012)210805R1508052140080522121220120805 1206(3216)311206R181********-6120633131632161206 1210(3225)321210S4112103242-2121043232532251210 1808(4520)421808R29180842-1808---45201808 1812(4532)431812S4318124343-21812-4343245321812 2220(5750)55--22205544-12221--5505650-③TEMPERATURE CHARACTERISTIC COG(NPO)C A N G CG COG/CH N C A C COG/CH A P2H(N150)P S--P P2H-P-P PH-R2H(N220)R1--R R2H-R-R RH-S2H(N330)S3--S S2H-S-S SH-T2H(N470)T O--T T2H-T-T TH-U2J(N750)U Z--U U2J-U UJ U UJ-S2L L Y--SL SL-G SL SL SL-X7R B C W R(X)X7R X7R B B C BJ X7R(B)Y(X) Z5U E E Z U-Z5U Z-E-Z5U U Y5V F G Y V Y5V Y5V Y F F F Y5V-④NOMINAL CAPACITANCE EX)103=10,000㎊221=220㎊225=2,200,000㎊=2.2㎌1R5=1.5㎊010=1㎊⑤CAPACITANCE TOLERANCE B:±0.1㎊C:±0.25㎊D:±0.5㎊F:±1%G:±2%J:±5%K:±10%M:±20%Z:-20~+80%⑥RATED VOLTAGE6.3V Q6-906 6.3-0J-J0J-10V P Z10081010-1A4L1A-16V O Y160416161601C3E1C J 25V A3250325252501E2T1E X 50V B5500550505001H5U1H A 100V C110111*********A1-2A B 200V D220122002002012D---C 250V E V--250250251---2E-500V G7501-500500501----E 630V H---630630----2J-1000V I A102-10001K102---3A G 2000V J G202-20002K202---3D-3000V K H302-30003K302---3F H 4000V-J-4000-402-----⑦TERMINATIONNICKEL BARRIER N T V C A(GRM)N-(MCH)--X Ag/Pd P1--B(GR)P-(MC)--F⑧PACKAGEBULK(VINYL)B9(NONE)-B PB*X-B B B PAPER TAPING C2,4T,R-T,L PT T E,V,W K,L T T C,P PLASTIC TAPING E1,3E,U-H,N PT-F,Y P,Q T-T,R BULK CASE P7--C PC-C C--G。
DASA说明书CH1.introduction_iMS-J__cn
１ ２２０Ｖ，
３ ２２０Ｖ， ５０／６０Ｈｚ
供应
５０／６０Ｈｚ
电源 电源容量［ ｋ Ｖ Ａ ］ ０．５ １．０
１．０ ２．０
３．５
６．０ ８．０ ９．０
编码器形式
Ｉｎｃｒｅｍｅｎｔａｌ （１５／１１／９线式） 或 Ａｂｓｏｌｕｔｅ（１３线式） – Ｌｉｎｅ Ｄｒｉｖｅｒ 输出性
Ａ Ｆｒａｍｅ １， ２ － 括号（ ）里的尺寸是Ｆｒａｍｅ ２的尺寸
名牌 Ｂ． Ｆｒａｍｅ ３
ｉ Ｍ Ｓ – Ｊ 系列概要
控制方式
位置控制 速度控制 扭矩控制
编程工具
示教板或ＰＣ
控 位置输入
ＤＣＩ， ＤＴＩ， ＰＣ， Ｆｅｅｄｅｒ Ｕｎｉｔ， Ｔｏｕｃｈ Ｓｃｒｅｅｎ
制 程序容量
合计 １６０００点 １０００行＊１６程序
Ｓ Ｓ Ｅ Ｑ Ｕ Ｅ Ｎ Ｃ Ｅ 命令 １４ ｓｅｔｓ （ＡＮＤ， ＯＲ， ）
iMS Series - EPSILON
产品的一般使用环境如下 如果实在不能满足使用环境时请向客户服务部咨询
项 目
内 容
使用环境
使用空间没有腐蚀性 爆发性气体
使用环境温度
０ ５０
使用环境湿度
２０ ８０％ （没有结露）
保管环境温度
－１５ ６０
ｉ Ｍ Ｓ – Ｊ 系列概要
ｉＭＳ Ｓｅｒｉｅｓ － ＥＰＳＩＬＯＮ
ｉ Ｍ Ｓ – Ｊ 系列概要
１－１ ｉ Ｍ Ｓ – Ｊ 控制器概要
１－１－１ 产品型号构成
ｉＭＳ － Ｊ － ０２００ － Ｍ
ａｂ
ｃ
ｄ
ａ． Ｎｉｃｋ Ｎａｍｅ
三星相机 ES15 说明书
软件注意事项 系统要求 关于软件 安装应用程序软件 启动计算机模式 删除可移动磁盘
Samsung Master 安装 MAC 的 USB 驱动程序 使用 MAC 的 USB 驱动程序 常见问题集
系统图
使用本产品前，请检查产品附件是否正确。产品附件因销售地区而异。若要购买选购设备，请联系您最近的三星经销商或三星服务中心。 随附产品和选购产品的图片与实物可能有所不同。
声音菜单 声音
音量 开机音乐 快门音 动作音 AF 音 自拍 设置菜单 显示
Language 功能描述 开机影像 显示亮度 快速查看 省电模式
048 设置 048 格式化存储器 048 初始化 049 设置日期/时间/日期类型 049 时区 049 文件名称 050 打印录制日期 050 关闭电源 051 选择视频输出类型 052 AF辅助光灯 052 设置 USB 052 选择电池类型
功能标识
后视图
LCD 显示器
相机状态指示灯
变焦 W 按钮(缩略图) 变焦 T 按钮(数码变焦)
相机带孔
USB / AV / DC 连接端 口
MENU 按钮
Fn/删除按钮 5功能按钮
播放模式按钮
9
功能标识
下视图
存储卡插槽
电池室盖
电池室
5 功能按钮
信息/向上按钮
OK / 播放与暂停按钮
闪光灯/ 向左按钮
User Manual
ES15
感谢您购买三星相机。 此使用说明书将指导您如何使用相机， 包括拍摄影像、下载影像及使用应用软 件等。请在使用相机前，仔细阅读此 说明书。
说明
请按照以下顺序使用本相机。 安装应用软件
相机与电脑连接之前，请先安装应 用软件。安装后，相机中保存的图 像可移动到电脑，并且可以用编辑 程序编辑图像。(请参阅第 84页)
三星 SMC-215彩色监视器 说明书
使用手册
目录
重要安全说明.....................................................c-2 图形符号说明.....................................................c-3 重要防护措施.....................................................c-4 前面板部件和控制开关.............................................c-8 后面板部件.......................................................c-15 连接.............................................................c-16 维护.............................................................c-17 产品规格.........................................................c-18 有毒有害物质及元素分析...........................................c-19
-4-
使用手册
9. 通风：在设备外壳的后部或底部设有槽缝和开口用来通风，以确保 本设备运行可靠，并防止设备过热，不得将本品放置在床，沙发，地 毯或类似的表面上，以免开口被堵塞或覆盖，也不得将本品放置在散 热器或加热器附近。除非通风良好，否则不得将本设备置于书架等内 置式装置中。
10. 电源：必须按照标签上标明的电源类型使用本设备，若不能确定您 家里的电源类型，请向经销商或当地电力公司咨询。
三星全套六西格玛01定义GBM01Sixsigma介绍36300
Intro- Six Sigma 介绍 - 16
Rev 2.0
Six Sigma的特征
顾客中心
Six Sigma 战略 : 识别顾客重视的 CTQ(Critical To Quality:重要品质特性) ，并执行其改善的Project 。
例1) 宾馆 Conference
提供者 (宾馆)
顾客 (会议参加者)
Proprietary to Samsung Electronics Company
Intro- Six Sigma 介绍 - 14
Rev 2.0
在Six Sigma中可使用的测度
COPQ(Cost of Poor Quality) :低品质费用 RTY(Rolled Throughput Yield) : 累积数率 FTY(First Time Yield) : 初期数率 YNor(Normalized Yield) : 标准化数率 DPU (Defects per Unit) DPO (Defects per Opportunity) DPMO (Defects per Million Opportunities) 工程能力指数(Cp, Cpk, Pp, Ppk) 水准
Intro- Six Sigma 介绍 - 20
Rev 2.0
Intro- Six Sigma 介绍 - 6
Rev 2.0
Six Sigma 概要
什么叫Six Sigma?
不仅制品设计和制造，而且包括事务间接、支援等全部种类的
Process中消除缺陷，离目标距离最小化，而创出组织 利益
同时提高顾客满足度的革新战略。
可测定的目标
- 对Process能力的定量性达成目标 - 3.4 DPMO (Defects per Million Opportunities)
三星规格书
July 2006MUTLAYERCERAMIC CAPACITORSQS 9000/ISO 9001Registered by BSI to QS 9000 or ISO 9001under BSI’s accreditation by UKAS forCertification.Registration NO:FM25309(2002. 2. 28)WE WILL PROVIDE A CUSTOMER WITH HIGH RELIABLE PRODUCTS ANDSERVICES003We, Samsung, declare that our component MLCC is produced in accordance with EU RoHS directive.1. RoHS Compliance and restriction of BrThe following restricted materials are not used in packaging materials as well as products in compliance with the law and restriction.- Cd, Pb, Hg, Cr+6, As, Br and the compounds, PCB, asbestos - Bromic materials : PBBs, PBBOs, PBDO, PBDE, PBB2. No use of materials breaking Ozone layerThe following ODS materials are not used in our fabrication process.- ODS material : Freon, Haron, 1-1-1 TCE, CCl4, HCFCIf you want more detailed Information,Please Visit Samsung Electro-mechanics Website []ISO / TS 16949QS 9000(Product)ISO 9001 (Product)TL 9000 (Product)ISO 14001 Quality System Certification ListT able 1:Certification list of Samsung FactoryBSI TS 91430-001BSI EMS 66454BSI TS 91430-001BSI FM 62262UL A14163CNAB 02103SI0055ROL BSI EMS69298BSI EMS 77354BSI FM 90588BSI EMS 66454SUWON(KOREA) BUSAN(KOREA) PHILIPPINES TIANJIN(CHINA) THAILANDFeature Capacitance Table (General Capacitors)Capacitance Table (General Capacitors)Capacitance Table (General Capacitors)Capacitance Table (General Capacitors)Capacitance Table (General Capacitors)Capacitance Table (General Capacitors)Capacitance Table (General Capacitors)Product Line UP (General Capacitors)Product Line UP (General Capacitors)CL10 R82CB8ANN CL10 010CB8ANN CL10 1R2CB8ANN CL10 1R5CB8ANN CL10 1R8CB8ANN CL10 020CB8ANN CL10 2R2CB8ANN CL10 2R7CB8ANN CL10 030CB8ANN CL10 3R3CB8ANN CL10 3R9CB8ANN CL10 040CB8ANN CL10 4R7CB8ANN CL10 050DB8ANN CL10 5R6DB8ANN CL10 060DB8ANN CL10 6R8DB8ANN CL10 070DB8ANN CL10 080DB8ANN CL10 8R2DB8ANN CL10 090DB8ANN CL10 100JB8NNN CL10 100J B8ANN CL10 120JB8NNN CL10 120JB8ANN CL10 150JB8NNN CL10 150JB8ANN CL10 180JB8NNN CL10 180J B8ANN CL10 220JB8NNN CL10 220JB8ANN CL10 270JB8NNN CL10 270JB8ANN CL10 330JB8NNN CL10 330JB8ANN0.821.001.201.501.802.002.202.703.003.303.904.004.705.005.606.006.807.008.008.209.0010101212151518182222272733330.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.5pF0.5pF0.5pF0.5pF0.5pF0.5pF0.5pF0.5pF5%5%5%5%5%5%5%5%5%5%5%5%5%5%50505050505050505050505050505050505050505050505050505050505050505050500.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.90Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitance(pF)C P R S T U LSize L W (1.6 0.8mm)C0G P2H R2H S2H T2H U2J S2LCL10 390JB8NNNCL10 390JB8ANNCL10 470JB8NNNCL10 470JB8ANNCL10 560JB8NNNCL10 560JB8ANNCL10 680JB8NNNCL10 680JB8ANNCL10 820JB8NNNCL10 820JB8ANNCL10 101JB8NNNCL10 101JB8ANNCL10 121JB8NNNCL10 121JB8ANNCL10 151JB8NNNCL10 151JB8ANNCL10 181JB8NNNCL10 181JB8ANNCL10 221JB8NNNCL10 221JB8ANNCL10 271JB8NNNCL10 271JB8ANNCL10 331JB8NNNCL10 331JB8ANNCL10 391JB8NNNCL10 471JB8NNNCL10 471JB8ANNCL10 561JB8NNNCL10 681JB8NNNCL10 681JB8ANNCL10 821JB8NNNCL10 102JB8NNNCL10 122JB8NNNCL10 222JB8NNNCL10 332JA8NNN3939474756566868828210010012012015015018018022022027027033033039047047056068068082010001200220033005%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%50505050505050505050505050505050505050505050505050505050505050505050250.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.90Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitance(pF)C P R S T U LSize L W (1.6 0.8mm)C0G P2H R2H S2H T2H U2J S2LGeneral CapacitorsProduct Line UP (General Capacitors)Product Line UP (General Capacitors)CL21 560JBANNNCL21 680JBANNN CL21 820JBANNN CL21 101JBANNN CL21 101JBAANN CL21 121JBANNN CL21 151JBANNN CL21 181JBANNN CL21 221JBANNN CL21 271JBANNN CL21 331JBANNN CL21 331JBAANN CL21 391JBANNN CL21 471JBANNN CL21 471JBAANN CL21 561JBANNN CL21 821JBCNNN CL21 821JBAANN CL21 102JBCNNN CL21 122JBFNNN CL21 152JBFNNN CL21 182JBFNNN CL21 222JBFNNN CL21 332JAFNNN CL21 332JBFNNN CL21 392JBFNNN CL21 472JAFNNN CL21 472JBFNNN CL21 562JBFNNN CL21 103JBFNNN56688210010012015018022027033033039047047056082082010001200150018002200330033003900470047005600100005% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%5050505050505050505050505050505050505050505050255050255050500.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.950.750.951.351.351.351.351.351.351.351.351.351.351.35Part Number ThicknessMax. (mm)RatedVoltage (Vdc)Capacitance Tolerance Capacitance (pF)C P R S T U LSize L W (2.0 1.25mm)C0G P2H R2H S2H T2H U2J S2LCL21 R47CBAANN CL21 0R5CBAANN CL21 R68CBAANN CL21 R82CBAANN CL21 010CBAANN CL21 1R2CBAANN CL21 1R5CBAANN CL21 1R8CBAANN CL21 020CBAANN CL21 2R2CBAANN CL21 2R7CBAANN CL21 030CBAANN CL21 3R3CBAANN CL21 3R9CBAANN CL21 040CBAANN CL21 4R7CBAANN CL21 050DBAANN CL21 5R6DBAANN CL21 060DBAANN CL21 6R8DBAANN CL21 070DBAANN CL21 080DBAANN CL21 8R2DBAANN CL21 090DBAANN CL21 100JBANNN CL21 100J BAANN CL21 120JBANNN CL21 120J BAANN CL21 150JBANNN CL21 180J BANNN CL21 220JBANNN CL21 270JBANNN CL21 330JBANNN CL21 390JBANNN CL21 470JBANNN0.470.500.680.821.001.201.501.802.002.202.703.003.303.904.004.705.005.606.006.807.008.008.209.0010101212151822273339470.25pF 0.25pF 0.25pF 0.25pF 0.25pF 0.25pF 0.25pF 0.25pF 0.25pF 0.25pF 0.25pF 0.25pF 0.25pF 0.25pF 0.25pF 0.25pF 0.5pF 0.5pF 0.5pF 0.5pF 0.5pF 0.5pF 0.5pF 0.5pF 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%50505050505050505050505050505050505050505050505050505050505050505050500.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.75Part Number ThicknessMax. (mm)RatedVoltage (Vdc)Capacitance Tolerance Capacitance (pF)C P R S T U LSize L W (2.0 1.25mm)C0G P2H R2H S2H T2H U2J S2LGeneralCapacitorsProduct Line UP (General Capacitors)Product Line UP (General Capacitors)CL05 153KA5NNN CL05 223KA5NNN CL05 223ZA5NNN CL05 102KO5NNN CL05 472KO5NNN CL05 682KO5NNN CL05 103KO5NNN CL05 103ZO5NNN CL05 153KO5NNN CL05 223KO5NNN CL05 223ZO5NNN CL05 333KO5NNN CL05 473KO5NNN CL05 473ZO5NNN CL05 683KO5NNN CL05 104KO5NNN CL05 104ZO5NNN CL05 224ZO5NNN CL05 103KP5NNN CL05 333KP5NNN CL05 473KP5NNN CL05 683KP5NNN CL05 104KP5NNN CL05 224ZP5NNN CL05 474ZP5NNN CL05 104KQ5NNN CL05 474KQ5NNN1522221.04.76.81010152222334747681001002201033476810022047010047010%10%+80%~-20%10%10%10%10%+80%~-20%10%10%+80%~-20%10%10%+80%~-20%10%10%+80%~-20%+80%~-20%10%10%10%10%10%+80%~-20%+80%~-20%10%+80%~-20%252525161616161616161616161616161616101010101010106.36.30.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.55Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitanceA B FSize L W (1.0 0.5mm)X5R(EIA) X7R(EIA) Y5V(EIA)General CapacitorsProduct Line UP (General Capacitors)CL31 122JBCNNN CL31 152JBCNNN CL31 182JBCNNN CL31 222JBCNNN CL31 472JBFNNN CL31 562JBHNNN CL31 682JBHNNN CL31 103JAFNNN CL32 103J BFNNN120015001800220047005600680010000100005%5%5%5%5%5%5%5%5%5050505050505025500.750.750.750.751.351.801.801.351.35Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitance(pF)C P R S T U LSize L W (3.2 1.6(2.5)mm)C0G P2H R2H S2H T2H U2J S2LCL05 221KB5NNN CL05 331KB5NNN CL05 471KB5NNN CL05 681KB5NNN CL05 102KB5NNN CL05 152KB5NNN CL05 222KB5NNN CL05 332KB5NNN CL05 472KB5NNN CL05 682KB5NNN CL05 103KB5NNN CL05 103ZB5NNN CL05 102KA5NNN CL05 222KA5NNN CL05 332KA5NNN CL05 472KA5NNN CL05 682KA5NNN CL05 103KA5NNN0.220.330.470.681.01.52.23.34.76.8101012.23.34.76.81010%10%10%10%10%10%10%10%10%10%10%+80%~-20%10%10%10%10%10%10%5050505050505050505050502525252525250.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.550.55Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitanceA B FSize L W (1.0 0.5mm)X5R(EIA) X7R(EIA) Y5V(EIA)Product Line UP (General Capacitors)CL10 101KB8NNN CL10 151KB8NNN CL10 221KB8NNN CL10 331KB8NNN CL10 471KB8NNN CL10 681KB8NNN CL10 102KB8NNN CL10 152KB8NNN CL10 222KB8NNN CL10 332KB8NNN CL10 472KB8NNN CL10 682KB8NNN CL10 103KB8NNN CL10 103ZB8NNN CL10 153KB8NNN CL10 223KB8NNN CL10 223ZB8NNN CL10 333KB8NNN CL10 473KB8NNN CL10 473ZB8NNN CL10 683KB8NNN CL10 104KB8NNN CL10 104ZB8NNN CL10 224ZB8NNN CL10 474ZB8NNN CL10 102KA8NNN CL10 472KA8NNN CL10 682KA8NNN CL10 103KA8NNN CL10 153KA8NNN CL10 223KA8NNN CL10 223ZA8NNN CL10 333KA8NNN CL10 473KA8NNN CL10 473ZA8NNN0.100.150.220.330.470.681.01.52.23.34.76.81010152222334747681001002204701.04.76.81015222233474710%10%10%10%10%10%10%10%10%10%10%10%10%+80%~-20%10%10%+80%~-20%10%10%+80%~-20%10%10%+80%~-20%+80%~-20%+80%~-20%10%10%10%10%10%10%+80%~-20%10%10%+80%~-20%50505050505050505050505050505050505050505050505050252525252525252525250.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.90Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitanceA B FSize L W (1.6 0.8mm)X5R(EIA) X7R(EIA) Y5V(EIA)Product Line UP (General Capacitors)Product Line UP (General Capacitors)CL10 683KA8NNNCL10 104KA8NNNCL10 104ZA8NNNCL10 224KA8NNNCL10 224ZA8NNNCL10 334KA8NNNCL10 474ZA8NNNCL10 102KO8NNNCL10 103KO8NNNCL10 153KO8NNNCL10 223KO8NNNCL10 333KO8NNNCL10 473KO8NNNCL10 473ZO8NNNCL10 683KO8NNNCL10 104KO8NNNCL10 104ZO8NNNCL10 154KO8NNNCL10 224KO8NNNCL10 224ZO8NNNCL10 334KO8NNNCL10 474KO8NNNCL10 474ZO8NNNCL10 105ZO8NNNCL10 154KP8NNNCL10 224KP8NNNCL10 334KP8NNNCL10 474KP8NNNCL10 474ZP8NNNCL10 105ZP8NNNCL10 474KQ8NNNCL10 684KQ8NNNCL10 105KQ8NNN681001002202203304701.0101522334747681001001502202203304704701.01502203304704701.04706801.010%10%+80%~-20%10%+80%~-20%10%+80%~-20%10%10%10%10%10%10%+80%~-20%10%10%+80%~-20%10%10%+80%~-20%10%10%+80%~-20%+80%~-20%10%10%10%10%+80%~-20%+80%~-20%10%10%10%2525252525252516161616161616161616161616161616161010101010106.36.36.30.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.90Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitanceA B FSize L W (1.6 0.8mm)X5R(EIA) X7R(EIA) Y5V(EIA)General CapacitorsCL21 151KBANNN CL21 221KBANNN CL21 331KBANNN CL21 471KBANNN CL21 681KBANNN CL21 102KBANNN CL21 152KBANNN CL21 222KBANNN CL21 332KBANNN CL21 332KBCNNN CL21 472KBANNN CL21 682KBANNN CL21 103KBANNN CL21 103KBCNNN CL21 103ZBANNN CL21 153KBANNN CL21 223KBANNN CL21 223ZBANNN CL21 333KBANNN CL21 473ZBANNN CL21 683KBCNNN CL21 104KBCNNN CL21 104ZBANNN CL21 104ZBCNNN CL21 154KBFNNN CL21 224KBFNNN CL21 224ZBCNNN CL21 474ZBFNNN CL21 105ZBFNNN CL21 102KAANNN CL21 103KAANNN CL21 473KAANNN CL21 683KAANNN CL21 104KACNNN CL21 104ZAANNN0.150.220.330.470.681.01.52.23.33.34.76.81010101522223347681001001001502202204701.01.010476810010010%10%10%10%10%10%10%10%10%10%10%10%10%10%+80%~-20%10%10%+80%~-20%10%+80%~-20%10%10%+80%~-20%+80%~-20%10%10%+80%~-20%+80%~-20%+80%~-20%10%10%10%10%10%+80%~-20%50505050505050505050505050505050505050505050505050505050502525252525250.750.750.750.750.750.750.750.750.750.950.750.750.750.950.750.750.750.750.750.750.950.950.750.951.351.350.951.351.350.750.750.750.750.950.75Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitanceA B FSize L W (2.0 1.25mm)X5R(EIA) X7R(EIA) Y5V(EIA)General CapacitorsProduct Line UP (General Capacitors)Product Line UP (General Capacitors)CL21 154KAFNNN CL21 224KAFNNN CL21 224ZAANNN CL21 334KAFNNN CL21 474KAFNNN CL21 474ZACNNN CL21 105ZAFNNN CL21 225ZAFNNN CL21 153KOANNN CL21 333KOANNN CL21 104KOANNN CL21 104ZOANNN CL21 154KOANNN CL21 224KOCNNN CL21 224ZOANNN CL21 334KOCNNN CL21 474KOFNNN CL21 474ZOANNN CL21 474ZOCNNN CL21 684KOFNNN CL21 105KOFNNN CL21 105ZOCNNN CL21 105ZOFNNN CL21 225ZOFNNN CL21 475ZOFNNN CL21 474KPCNNN CL21 684KPFNNN CL21 105KPFNNN CL21 225ZPFNNN CL21 475Z PFNNN1502202203304704701.02.215331001001502202203304704704706801.01.01.02.24.74706801.02.24.710%10%+80%~-20%10%10%+80%~-20%+80%~-20%+80%~-20%10%10%10%+80%~-20%10%10%+80%~-20%10%10%+80%~-20%+80%~-20%10%10%+80%~-20%+80%~-20%+80%~-20%+80%~-20%10%10%10%+80%~-20%+80%~-20%2525252525252525161616161616161616161616161616161610101010101.351.350.751.351.350.951.351.350.750.750.750.750.750.950.750.951.350.750.951.351.350.951.351.351.350.951.351.351.351.35Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitanceA B FSize L W (2.0 1.25mm)X5R(EIA) X7R(EIA) Y5V(EIA)Product Line UP (General Capacitors)Product Line UP (General Capacitors)Feature Capacitance Table (Ultra High Capacitors)Size TC Rated V 4(R) 6.3(Q) 10(P) 16(O) 25(A) 6.3(Q) 10(P) 16(O) 25(A) 6.3(Q) 10(P) 16(O) 6.3(Q)X5R(A)1812(43)0805(21)1206(31)1210(32)Capacitance Table (Ultra High Capacitors)Capacitance Table (Ultra High Capacitors)Size TC Rated V 6.3(Q) 6.3(Q) 4(R) 6.3(Q) 10() 6.3(Q) 6.3(Q) 10()X7R(B)/ X6S(X)1812(43)1210(32)1206(31)0805(21)0603(10)0402(05)Product Line UP (Ultra High Capacitors)Product Line UP (Ultra High Capacitors)Super Small Size CapacitorsCL10F225ZP8NNN CL21F106ZPFNNN CL31F226ZPHNNN CL32F226Z PINNN CL32F226ZPJNNN CL05F105ZQ5NNN CL10F475ZQ8NNN CL32F107ZQJNNNY5V(EIA)Y5V(EIA)Y5V(EIA)Y5V(EIA)Y5V(EIA)Y5V(EIA)Y5V(EIA)Y5V(EIA) 2.2 10 22 22 22 1.0 4.7 10080%/-20%80%/-20%80%/-20%80%/-20%80%/-20%80%/-20%80%/-20%80%/-20%10101010106.36.36.30.901.351.802.202.800.550.902.80-82~+22%(-30~+85 )-82~+22%(-30~+85)-82~+22%(-30~+85 )-82~+22%(-30~+85 )-82~+22%(-30~+85 )-82~+22%(-30~+85 )-82~+22%(-30~+85 )-82~+22%(-30~+85 ) 1.60 0.802.00 1.253.20 1.603.20 2.503.20 2.501.00 0.501.60 0.803.20 2.50Part Number ThicknessMax. (mm)RatedVoltage(Vdc)Capacitance Tolerance Capacitance TC CodeTemperature Characteristics Size L W (mm)mark means packaging code. If you want to learn the code or quantity in detail, please see p 58.Small chip size(0.6 0.3 0.3 mm)03 Series(C0G) MLCC shows very low ESR valae. 03 Series are suited to only reflow soldering 03 Series are suited to miniature RF module,portable equipment and high frequency circuitVCO, Tuner, RF Module MCM ModuleMobile phone, Wireless LAN, Note PCFeatureApplicationStructure and DimensionsCodeEIA CodeL W T BW Dimension (mm)0.3 0.030.3 0.030.6 0.0302010.15 0.0503CL05X105KQ5NNN CL10X105KQ8NNN CL21X225KQFNNN CL21X475KQFNNN CL31X106KQHNNN CL21X106KRFNNN CL21B225KPFNNN CL43B226KOJNNN CL21B225KPF NNN CL31B106KQHNNN CL32B226KQ J NNNX6S(EIA)X6S(EIA)X6S(EIA)X6S(EIA)X6S(EIA)X6S(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA) 1.0 1.0 2.2 4.7 10 10 2.2 22 2.2 10 2210% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10%6.36.36.36.36.3410106.36.36.30.550.901.351.351.801.351.352.801.351.802.8022%(-55~+105 ) 22%(-55~+105 ) 22%(-55~+105 ) 22%(-55~+105 ) 22%(-55~+105 ) 22%(-55~+105 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 1.00 0.501.60 0.802.00 1.252.00 1.253.20 1.602.00 1.252.00 1.254.50 3.202.00 1.253.20 1.603.20 2.50Part Number Thickness Max. (mm)RatedVoltage(Vdc)Capacitance Tolerance Capacitance TC CodeTemperature Characteristics Size L W(mm)Product Line UP (Ultra High Capacitors)High Voltage CapacitorsCode EIA Code L W T BW Dimension(mm)0.8 0.11.25 0.11.6 0.21.25 0.150.85 0.152.5 0.22.0 0.22.5 0.22.5 0.20.8 0.11.25 0.11.6 0.21.6 0.152.5 0.22.0 0.23.2 0.35.0 0.41.6 0.12.0 0.13.2 0.23.2 0.153.2 0.34.5 0.44.5 0.45.7 0.406030805120612101808181222200.3 0.20.5+0.2/-0.30.5 0.30.6 0.30.8 0.30.8 0.31.0 0.310213132424355Highly reliable performance Operating at high voltage levelWide voltage level: from 100V to 3000V High withstanding voltageTape & reel surface mount assemblySwitching Power Circuit(SMPS)Lighting Ballast, LCD back lighting inverter DC-DC converter input filter, snubber circuitTip & Ring(Phone, Fax, Modem) Network(IEEE802.3)FeatureApplicationStructure and DimensionsCL03B331KO3NNN CL03B102KO3NNN CL03B472KP3NNN CL03A103KP3NNN CL03B103KP3NNN CL03B472KQ3NNN CL03A223KQ3NNN CL03A473KQ3NNN CL03A104KQ3NNNX7R(EIA)X7R(EIA)X7R(EIA)X5R(EIA)X7R(EIA)X7R(EIA)X5R(EIA)X5R(EIA)X5R(EIA)0.33 1.0 4.7 10 10 4.7 22 47 10010% 10% 10% 10% 10% 10% 10% 10% 10%16161010106.36.36.36.30.330.330.330.330.330.330.330.330.3315%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+85 )15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+85 ) 15%(-55~+85 ) 15%(-55~+85 )0.60 0.300.60 0.300.60 0.300.60 0.300.60 0.300.60 0.300.60 0.300.60 0.300.60 0.30Part Number Thickness Max. (mm)RatedVoltage(Vdc)Capacitance Tolerance Capacitance TC CodeTemperature Characteristics Size L W(mm)Product Line UP (Super Small Size Capacitors)mark means packaging code. If you want to learn the code or quantity in detail, please see p 58.Capacitance Table (High Voltage Capacitors)Capacitance Table (High Voltage Capacitors)Capacitance Table (High Voltage Capacitors)Product Line UP (High Voltage Capacitors)High Voltage CapacitorsCL21C180JDCNNN CL21C330JDCNNN CL21C390JDCNNN CL21C470JDCNNN CL21C560JDCNNN CL21C680JDCNNN CL21C101JDCNNN CL21C121JDCNNN CL21C221JDCNNN CL21C102JDFNNN CL10C100JC8NNN CL21C100JCANNN CL21C120JCANNN CL10C150JC8NNN CL21C150JCANNN CL21C180JCANNN CL21C220JCANNN CL21C270JCANNN CL21C330JCANNN CL10C330JC8NNN CL10C390JC8NNN CL10C470JC8NNN CL21C470JCANNN CL21C560JCCNNN CL21C680JCANNN CL31C680JCCNNN CL21C820JCCNNN CL10C101JC8NNN CL21C101JCANNN CL10C121J C8NNN CL10C151JC8NNN CL21C151JCANNN CL21C221JCANNN CL31C271JCCNNN CL21C331JCANNNC0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)18 33 39 47 56 68 100 120 220 1.0 10 10 12 15 15 18 22 27 33 33 39 47 47 47 68 68 82 100 100 120 150 150 220 270 3305% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%2002002002002002002002002002001001001001001001001001001001001001001001001001001001001001001001001001001001.001.001.001.001.001.001.001.001.001.350.900.750.750.900.750.750.750.750.750.900.900.900.750.750.751.001.000.900.750.900.900.750.751.000.7530ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 )2.00X1.252.00X1.252.00X1.252.00X1.252.00X1.252.00X1.252.00X1.252.00X1.252.00X1.252.00X1.251.60X0.802.00X1.252.00X1.251.60X0.802.00X1.252.00X1.252.00X1.252.00X1.252.00X1.251.60X0.801.60X0.801.60X0.802.00X1.252.00X1.252.00X1.253.20X1.603.20X1.601.60X0.802.00X1.251.60X0.801.60X0.802.00X1.252.00X1.253.20X1.602.00X1.25Part Number Thickness Max. (mm)RatedVoltage (Vdc)Capacitance Tolerance CapacitanceTC Code Temperature CharacteristicsSize L W(mm)mark means packaging code. If you want to learn the code or quantity in detail, please see p 58.Product Line UP (High Voltage Capacitors)Product Line UP (High Voltage Capacitors)CL10C331JC8NNN CL31C391JCCNNN CL10C471JC8NNN CL21C471JCCNNN CL21C561JCCNNN CL31C561JCCNNN CL21C681JCCNNN CL21C102JCFNNN CL31C102JCCNNN CL31C152JCCNNN CL31C222JCCNNN CL31C392JCHNNNC0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)330 390 470 470 560 560 680 1.0 1.0 1.5 2.2 3.95% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%1001001001001001001001001001001001000.901.000.901.001.001.001.001.351.001.001.001.8030ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 )1.60X0.803.20X1.601.60X0.802.00X1.252.00X1.253.20X1.602.00X1.252.00X1.253.20X1.603.20X1.603.20X1.603.20X1.60Part Number Thickness Max. (mm)RatedVoltage (Vdc)Capacitance Tolerance CapacitanceTC Code Temperature CharacteristicsSize L W(mm)CL31B102KJHNNN CL32B102KJF NNN CL43B102KJFNNN CL43B152KJFNNN CL31B102KI FNNN CL31B222KIFNNN CL43B222KIFNNN CL43B103KIFNNN CL31B102KHFNNN CL32B472KHFNNN CL31B103KHFNNN CL31B221KGFNNN CL31B471KGFNNN CL31B102KGFNNN CL31B152KGFNNNX7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)1.0 1.0 1.0 1.5 1.02.2 2.2 10 1.0 4.7 10 0.22 0.47 1.0 1.510% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10%200020002000200010001000100010006306306305005005005001.801.351.351.351.351.351.351.351.351.351.351.351.351.351.3515%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 )3.20 1.603.20 2.504.50 3.204.50 3.203.20 1.603.20 1.604.50 3.204.50 3.203.20 1.603.20 2.503.20 1.603.20 1.603.20 1.603.20 1.603.20 1.60Part Number Thickness Max. (mm)RatedVoltage (Vdc)Capacitance Tolerance CapacitanceTC CodeTemperature CharacteristicsSize L W(mm)mark means packaging code. If you want to learn the code or quantity in detail, please see p 58.CL31B222KGFNNN CL31B332KGFNNN CL31B472KGFNNN CL31B682KGFNNN CL31B103KGFNNN CL32B153KGFNNN CL32B223KGFNNN CL43B473KGFNNN CL43B104KG INNN CL21B153KEFNNN CL31B473KEHNNN CL32B104KE J NNN CL43B474KE JNNN CL21B221KDCNNN CL21B331KDCNNN CL31B471KDCNNN CL21B102KDCNNN CL21B222KDCNNN CL31B222KDCNNN CL21B472KDCNNN CL31B472KDCNNN CL21B103KDCNNN CL31B153KDCNNN CL31B223KDCNNN CL31B333KDFNNN CL31B473KDFNNN CL32B473KDHNNN CL31B104KDHNNN CL43B104KDFNNN CL21B221KCANNN CL21B471KCANNN CL10B102KC8NNN CL21B102KCANNN CL21B222KCANNN CL21B332KCANNNX7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)2.23.34.7 6.8 10 15 22 47 100 15 47 100 470 0.22 0.33 0.47 1.0 2.2 2.2 4.7 4.7 10 15 22 33 47 47 100 100 0.22 0.47 1.0 1.0 2.2 3.310% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10%5005005005005005005005005002502502502502002002002002002002002002002002002002002002002001001001001001001001.351.351.351.351.351.351.351.352.201.351.802.802.801.001.001.001.001.001.001.001.001.001.001.001.351.351.801.801.350.750.750.900.750.750.7515%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 )3.20 1.603.20 1.603.20 1.603.20 1.603.20 1.603.20 2.503.20 2.504.50 3.204.50 3.202.00 1.253.20 1.603.20 2.504.50 3.202.00 1.252.00 1.253.20 1.602.00 1.252.00 1.253.20 1.602.00 1.253.20 1.602.00 1.253.20 1.603.20 1.603.20 1.603.20 1.603.20 2.503.20 1.604.50 3.202.00 1.252.00 1.251.60 0.802.00 1.252.00 1.252.00 1.25Part Number Thickness Max. (mm)RatedVoltage (Vdc)Capacitance Tolerance CapacitanceTC CodeTemperature CharacteristicsSize L W(mm)mark means packaging code. If you want to learn the code or quantity in detail, please see p 58.Product Line UP (High Voltage Capacitors)Product Line UP (High Voltage Capacitors)CL10B472KC8NNN CL21B472KCANNN CL21B682KCANNN CL10B103KC8NNN CL21B103KCANNN CL32B103KCFNNN CL21B153KCCNNN CL31B153KCCNNN CL21B223KCFNNN CL31B223KCCNNN CL31B333KCCNNN CL21B473KCFNNN CL31B473KCCNNN CL31B104KCFNNN CL31B154KCHNNN CL32B154KCFNNN CL32B224KCHNNN CL43B224KCFNNN CL32B334KCHNNN CL43B334KCFNNN CL32B474KCI NNN CL43B474KCHNNN CL31B105KCHNNN CL32B105KCJNNN CL43B105KCJNNN CL55B105KCHNNNX7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)4.7 4.7 6.8 10 10 10 15 15 22 22 33 47 47 100 150 150 220 220 330 330 470 470 1.0 1.0 1.0 1.010% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10%1001001001001001001001001001001001001001001001001001001001001001001001001001000.900.750.750.900.751.351.001.001.351.001.001.351.001.351.801.351.801.351.801.352.201.801.802.802.801.8015%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 )1.60 0.802.00 1.252.00 1.251.60 0.802.00 1.253.20 2.502.00 1.253.20 1.602.00 1.503.20 1.603.20 1.602.00 1.253.20 1.603.20 1.603.20 1.603.20 2.503.20 2.504.50 3.203.20 2.504.50 3.203.20 2.504.50 3.203.20 1.603.20 2.504.50 3.205.70 5.00Part Number Thickness Max. (mm)RatedVoltage (Vdc)Capacitance Tolerance CapacitanceTC CodeTemperature CharacteristicsSize L W(mm)mark means packaging code. If you want to learn the code or quantity in detail, please see p 58.High Voltage Capacitors。
三星电容全系列规格书
March 2009MULTILAYERCERAMIC CAPACITORSAll information indicated in this catalog is as of March. 2009The specifications and designs contained herein may be subject to change without notice.Passive components Sales OfficeHead Office206, Cheomdansaneop Road,Youngtong-gu,Suwon, Kyonggi Province 443-743, KoreaEuropeTel:+82-31-210-6328E-mail:james.pyun@ AmericaTel:+82-31-210-6794E-mail:randy.kim@ AsiaTel:+82-31-210-5348E-mail:koogi@ DomesticTel:+82-31-210-3757E-mail:southjoy@Manufacturing SiteSuwon Plant (Korea)206 Cheomdansaneop Road, Youngtong -gu,Suwon, Kyonggi Province 443-743, KoreaTel:+82-31-210-6794E-mail:randy.kim@ Busan Plant (Korea)1623-2, Songjeong -dong,Kangseo -gu, Busan 618-270, Korea Tel:+82-51-970-7671E-mail:kyc.kweon@ Tianjin Plant (China)27, Heiniucheng -Road, Hexi District,Tianjin, China 300210Tel:+86-22-2830-3333(3450)E-mail:gk.ryu@ Philippines Plant (Philippines)Calamba Premiere International Park, Batino, Calamba, Laguna, Manila Tel:+63-2-809-2873E-mail:ksj1445@Asia sales officeShanghai OfficeRm 1408 Shanghai international trade center No 2200 Yan an (W )RD Shanghai China 200335Te l:86-21-6270-4168(274)E-mail:dennis.cha@ Shenzhen OfficeRm 4501, 45/F, New World Center,Yitian Road, Futian District,Shenzhen, China 518026Te l:86-755-8608-5581E-mail:jackson.xian@ Qingdao OfficeRm 1201. Growne Plaza Qingdao;76XiangGangZhong Rd, Qingdao;266071P.R. ChinaTe l:86-532-5779102E-mail:zhengguo.cui@ HongKong OfficeSuite 4511, Two int’l Finance Centre,8 Finance Street, Central, Hongkong Te l:852-2862-6350E-mail:vinsent.chou@ Singapore Office3 Church Street Samsung Hub #23-02 Singapore 049483Te l:(65)6833-3228E-mail:winson.yeong@ Thai OfficeWellgrow Industrial Estate,93 Moo 5 T. Bangsamak, A.Bangpakong Chachoengsao 24180 Thailand Te l:66-38-562-026E-mail:sbimm@ Taiwan Office399 9F -1, Ruey Kuang Rd., Neihu, Taipei, TaiwanTe l:886-2-2656-8356E-mail:kevin0130.wang@America sales officeIrvine Office3345 Michelson Drive,Suite 350,Irvine, CA 92612Tel:1-949-797-8047E-mail:sh386.kim@Europe sales officeFrankfurt Office Samsung hausAm Kronberger Hang 6D-65824 Schwalbach/Ts.Tel:49-6196-66-7255FAX:49-(0)6196-66-7755E-mail:frank.goebel@ Hungary OfficeH2310, Szigetszentmiklos, Leshegy u.2-4, HungaryTel:36-24-551-148E-mail:jun21c.lee@Domestic DistributorsKORCHIP INC#219-8 Gasan -dong, Gumchun -gu,Seoul, KoreaTel:+82-2-838-5588E-mail:hjh0064@ CHUNG HAN#16-96 Hangang -lo 3, Youngsan -Gu,Seoul, KoreaTel:+82-2-718-3322E-mail:bu1230choi@ SAMTDaekyung Bldg.,Daechi-Dong,Gangnam -Gu, Seoul, Korea Tel:+82-2-3458-9000E-mail:info@ CHUNGMAC#53-5 Wonhyolo3 Youngsan -gu, Seoul, KoreaTel:+82-2-716-6428~9E-mail:webmaster@anycam.co.kr APEXINTRoom #905. C -dong Woorimlion ,s,Valley 371-28, Gasan-dong,Guemcheon-Gu, Seoul, Korea Tel:+82-2-2026-2610(2)E-mail:info@apexint.co.krWe, Samsung, declare that our component MLCC is produced in accordance with EU RoHS directive.1.RoHS Compliance and restriction of BrThe following restricted materials are not used in packaging materials as well as products in compliance with the law and restriction.- Cd, Pb, Hg, Cr+6, As, Br and the compounds, PCB, asbestos- Bromic materials : PBBs, PBBOs, PBDO, PBDE, PBB2.No use of materials breaking Ozone layerThe following ODS materials are not used in our fabrication process.- ODS material : Freon, Haron, 1-1-1 TCE, CCl4, HCFCIf you want more detailed Information,Please Visit Samsung Electro-mechanics Website CONTENTSPart NumberingSystem4628353950525558627983GeneralCapacitorsUltra HighCapacitorsSuper SmallCapacitorsHigh VoltageCapacitorsCamera StrobeCircuit CapacitorsArray TypeCapacitorsLow ESLCapacitorsApplication Manualfor Surface MountingPackagingSpecificationPremium Capacitorsfor AutomotiveApplicationsReliability TestConditionPart Numbering SystemFeature Capacitance Table (General Capacitors)GeneralCapacitorsCapacitance Table (General Capacitors)Capacitance Table (General Capacitors)GeneralCapacitorsCapacitance Table (General Capacitors)Capacitance Table (General Capacitors)GeneralCapacitorsCapacitance Table (General Capacitors)Capacitance Table (General Capacitors)GeneralCapacitorsProduct Line Up (General Capacitors)Product Line Up (General Capacitors)GeneralCapacitorsCL10 R82CB8ANNCL10 010CB8ANNCL10 1R2CB8ANNCL10 1R5CB8ANNCL10 1R8CB8ANNCL10 020CB8ANNCL10 2R2CB8ANNCL10 2R7CB8ANNCL10 030CB8ANNCL10 3R3CB8ANNCL10 3R9CB8ANNCL10 040CB8ANNCL10 4R7CB8ANNCL10 050DB8ANNCL10 5R6DB8ANNCL10 060DB8ANNCL10 6R8DB8ANNCL10 070DB8ANNCL10 080DB8ANNCL10 8R2DB8ANNCL10 090DB8ANNCL10 100JB8NNNCL10 100J B8ANNCL10 120JB8NNNCL10 120JB8ANNCL10 150JB8NNNCL10 150JB8ANNCL10 180JB8NNNCL10 180J B8ANNCL10 220JB8NNNCL10 220JB8ANNCL10 270JB8NNNCL10 270JB8ANNCL10 330JB8NNNCL10 330JB8ANN0.821.001.201.501.802.002.202.703.003.303.904.004.705.005.606.006.807.008.008.209.0010101212151518182222272733330.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.5pF0.5pF0.5pF0.5pF0.5pF0.5pF0.5pF0.5pF5%5%5%5%5%5%5%5%5%5%5%5%5%5%50505050505050505050505050505050505050505050505050505050505050505050500.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.90Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitance(pF)C P R S T U LSize L W (1.6 0.8mm)C0G P2H R2H S2H T2H U2J S2LCL10 390JB8NNNCL10 390JB8ANNCL10 470JB8NNNCL10 470JB8ANNCL10 560JB8NNNCL10 560JB8ANNCL10 680JB8NNNCL10 680JB8ANNCL10 820JB8NNNCL10 820JB8ANNCL10 101JB8NNNCL10 101JB8ANNCL10 121JB8NNNCL10 121JB8ANNCL10 151JB8NNNCL10 151JB8ANNCL10 181JB8NNNCL10 181JB8ANNCL10 221JB8NNNCL10 221JB8ANNCL10 271JB8NNNCL10 271JB8ANNCL10 331JB8NNNCL10 331JB8ANNCL10 391JB8NNNCL10 471JB8NNNCL10 471JB8ANNCL10 561JB8NNNCL10 681JB8NNNCL10 681JB8ANNCL10 821JB8NNNCL10 102JB8NNNCL10 122JB8NNNCL10 222JB8NNNCL10 332JA8NNN3939474756566868828210010012012015015018018022022027027033033039047047056068068082010001200220033005%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%50505050505050505050505050505050505050505050505050505050505050505050250.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.90Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitance(pF)C P R S T U LSize L W (1.6 0.8mm)C0G P2H R2H S2H T2H U2J S2LProduct Line Up (General Capacitors)Product Line Up (General Capacitors)GeneralCapacitorsCL21 560JBANNNCL21 680JBANNNCL21 820JBANNNCL21 101JBANNNCL21 101JBAANNCL21 121JBANNNCL21 151JBANNNCL21 181JBANNNCL21 221JBANNNCL21 271JBANNNCL21 331JBANNNCL21 331JBAANNCL21 391JBANNNCL21 471JBANNNCL21 471JBAANNCL21 561JBANNNCL21 821JBCNNNCL21 821JBAANNCL21 102JBCNNNCL21 122JBFNNNCL21 152JBFNNNCL21 182JBFNNNCL21 222JBFNNNCL21 332JAFNNNCL21 332JBFNNNCL21 392JBFNNNCL21 472JAFNNNCL21 472JBFNNNCL21 562JBFNNNCL21 103JBFNNN56688210010012015018022027033033039047047056082082010001200150018002200330033003900470047005600100005%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5%5050505050505050505050505050505050505050505050255050255050500.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.950.750.951.351.351.351.351.351.351.351.351.351.351.35Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitance(pF)C P R S T U LSize L W (2.0 1.25mm)C0G P2H R2H S2H T2H U2J S2LCL21 R47CBAANNCL21 0R5CBAANNCL21 R68CBAANNCL21 R82CBAANNCL21 010CBAANNCL21 1R2CBAANNCL21 1R5CBAANNCL21 1R8CBAANNCL21 020CBAANNCL21 2R2CBAANNCL21 2R7CBAANNCL21 030CBAANNCL21 3R3CBAANNCL21 3R9CBAANNCL21 040CBAANNCL21 4R7CBAANNCL21 050DBAANNCL21 5R6DBAANNCL21 060DBAANNCL21 6R8DBAANNCL21 070DBAANNCL21 080DBAANNCL21 8R2DBAANNCL21 090DBAANNCL21 100JBANNNCL21 100J BAANNCL21 120JBANNNCL21 120J BAANNCL21 150JBANNNCL21 180J BANNNCL21 220JBANNNCL21 270JBANNNCL21 330JBANNNCL21 390JBANNNCL21 470JBANNN0.470.500.680.821.001.201.501.802.002.202.703.003.303.904.004.705.005.606.006.807.008.008.209.0010101212151822273339470.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.25pF0.5pF0.5pF0.5pF0.5pF0.5pF0.5pF0.5pF0.5pF5%5%5%5%5%5%5%5%5%5%5%50505050505050505050505050505050505050505050505050505050505050505050500.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.750.75Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitance(pF)C P R S T U LSize L W (2.0 1.25mm)C0G P2H R2H S2H T2H U2J S2LProduct Line Up (General Capacitors)Product Line Up (General Capacitors)GeneralCapacitorsProduct Line Up (General Capacitors)Product Line Up (General Capacitors)GeneralCapacitorsProduct Line Up (General Capacitors)Product Line Up (General Capacitors)GeneralCapacitorsProduct Line Up (General Capacitors)Product Line Up (General Capacitors)GeneralCapacitorsProduct Line Up (General Capacitors)Product Line Up (General Capacitors)GeneralCapacitorsUltra HighCapacitorsCapacitance Table (Ultra High Capacitors)Capacitance Table (Ultra High Capacitors)Ultra HighCapacitorsCL10F225ZP8NNNCL21F106ZPFNNNCL31F226ZPHNNNCL32F226ZPJNNNCL05F105ZQ5NNNCL10F475ZQ8NNNCL32F107ZQJNNNY5V(EIA)Y5V(EIA)Y5V(EIA)Y5V(EIA)Y5V(EIA)Y5V(EIA)Y5V(EIA)2.21022221.04.710080%/-20%80%/-20%80%/-20%80%/-20%80%/-20%80%/-20%80%/-20%101010106.36.36.30.901.351.802.700.550.902.70-82~+22%(-30~+85 )-82~+22%(-30~+85 )-82~+22%(-30~+85 )-82~+22%(-30~+85 )-82~+22%(-30~+85 )-82~+22%(-30~+85 )-82~+22%(-30~+85 )1.60 0.802.00 1.253.20 1.603.20 2.501.00 0.501.60 0.803.20 2.50Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitanceTCCodeTemperatureCharacteristicsSize L W(mm)mark means packaging code. If you want to learn the code or quantity in detail, please see p 81.Small chip size03 Series(C0G) MLCC shows very low ESR valae.02 and 03 Series are suited to only reflow soldering02 and 03 Series are suited to miniature RF module,portable equipment and high frequency circuitVCO, Tuner, RF ModuleMCM ModuleMobile phone, Wireless LAN, Note PCFor using special purpose like Military, Medical, Aviation, Automobile device should be following a special specification.FeatureApplicationStructure and DimensionsCodeEIACode L W T BWDimension(mm)0.3 0.030.3 0.030.6 0.0302010.15 0.05030.2 0.020.2 0.020.4 0.02010050.07~0.1402CL21X106KAYNNNCL31X106KAHNNNCL21X106KOYNNNCL21X106KPCLNNCL05X105KQ5NNNCL10X105KQ8NNNCL21X225KQFNNNCL21X475KQFNNNCL10X106KQ8NNNCL21X106KQQNNNCL31X106KQHNNNCL21X226KQQNNNCL21X106KRCLNNCL31B475KAHNNNCL31B106KAHNNNCL31B475KOHNNNCL31B106KOHNNNCL21B225KQFNNNCL21B225KPFNNNCL21B106KQQNNNCL31B106KQHNNNCL32B226KQJNNNX6S(EIA)X6S(EIA)X6S(EIA)X6S(EIA)X6S(EIA)X6S(EIA)X6S(EIA)X6S(EIA)X5R(EIA)X6S(EIA)X6S(EIA)X6S(EIA)X6S(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)101010101.01.02.24.710101022104.7104.7102.22.210102210%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%252516106.36.36.36.36.36.36.36.342525161610106.36.36.31.451.801.450.950.550.901.351.350.901.401.801.400.951.801.801.801.801.351.351.351.802.7022%(-55~+105 )22%(-55~+105 )22%(-55~+105 )22%(-55~+105 )22%(-55~+105 )22%(-55~+105 )22%(-55~+105 )22%(-55~+105 )15%(-55~+85 )22%(-55~+105 )22%(-55~+105 )22%(-55~+105 )22%(-55~+105 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )2.00 1.253.20 1.602.00 1.252.00 1.251.00 0.501.60 0.802.00 1.252.00 1.251.60 0.802.00 1.253.20 1.602.00 1.252.00 1.253.20 1.603.20 1.603.20 1.603.20 1.602.00 1.252.00 1.252.00 1.253.20 1.603.20 2.50Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitanceTCCodeTemperatureCharacteristicsSize L W(mm)Product Line Up (Ultra High Capacitors)Super SmallCapacitorsSuper Small CapacitorsProduct Line Up (Super Small Size Capacitors)FeatureHigh VoltageCapacitorsHigh Voltage CapacitorsCapacitance Table (High Voltage Capacitors)Capacitance Table (High Voltage Capacitors)High VoltageCapacitorsCapacitance Table (High Voltage Capacitors)Product Line Up (High Voltage Capacitors)High VoltageCapacitorsProduct Line Up (High Voltage Capacitors)Product Line Up (High Voltage Capacitors)High VoltageCapacitorsCL31B222KGFNNNCL31B332KGFNNNCL31B472KGFNNNCL31B682KGFNNNCL31B103KGFNNNCL32B153KGFNNNCL32B223KGFNNNCL43B473KGFNNNCL43B104KG INNNCL21B153KEFNNNCL31B473KEHNNNCL32B104KE J NNNCL43B474KE JNNNCL21B221KDCNNNCL21B331KDCNNNCL31B471KDCNNNCL21B102KDCNNNCL21B222KDCNNNCL31B222KDCNNNCL21B472KDCNNNCL31B472KDCNNNCL21B103KDCNNNCL31B153KDCNNNCL31B223KDCNNNCL31B333KDFNNNCL31B473KDFNNNCL32B473KDHNNNCL31B104KDHNNNCL43B104KDFNNNCL21B221KCANNNCL21B471KCANNNCL10B102KC8NNNCL21B102KCANNNCL21B222KCANNNCL21B332KCANNNX7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)2.23.34.76.81015224710015471004700.220.330.471.02.22.24.74.71015223347471001000.220.471.01.02.23.310%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%5005005005005005005005005002502502502502002002002002002002002002002002002002002002002001001001001001001001.351.351.351.351.351.351.351.352.201.351.802.802.801.001.001.001.001.001.001.001.001.001.001.001.351.351.801.801.350.750.750.900.750.750.7515%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )3.20 1.603.20 1.603.20 1.603.20 1.603.20 1.603.20 2.503.20 2.504.50 3.204.50 3.202.00 1.253.20 1.603.20 2.504.50 3.202.00 1.252.00 1.253.20 1.602.00 1.252.00 1.253.20 1.602.00 1.253.20 1.602.00 1.253.20 1.603.20 1.603.20 1.603.20 1.603.20 2.503.20 1.604.50 3.202.00 1.252.00 1.251.60 0.802.00 1.252.00 1.252.00 1.25Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitanceTCCodeTemperatureCharacteristicsSize L W(mm)Product Line Up (High Voltage Capacitors)Product Line Up (High Voltage Capacitors)CL10B472KC8NNNCL21B472KCANNNCL21B682KCANNNCL10B103KC8NNNCL21B103KCANNNCL32B103KCFNNNCL21B153KCCNNNCL31B153KCCNNNCL21B223KCFNNNCL31B223KCCNNNCL31B333KCCNNNCL21B473KCFNNNCL31B473KCCNNNCL31B104KCFNNNCL31B154KCHNNNCL32B154KCFNNNCL32B224KCHNNNCL43B224KCFNNNCL32B334KCHNNNCL43B334KCFNNNCL32B474KCI NNNCL43B474KCHNNNCL31B105KCHNNNCL32B105KCJNNNCL43B105KCJNNNCL55B105KCHNNNX7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)4.74.76.8101010151522223347471001501502202203303304704701.01.01.01.010%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%10%1001001001001001001001001001001001001001001001001001001001001001001001001001000.900.750.750.900.751.351.001.001.351.001.001.351.001.351.801.351.801.351.801.352.201.801.802.802.801.8015%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )15%(-55~+125 )1.60 0.802.00 1.252.00 1.251.60 0.802.00 1.253.20 2.502.00 1.253.20 1.602.00 1.503.20 1.603.20 1.602.00 1.253.20 1.603.20 1.603.20 1.603.20 2.503.20 2.504.50 3.203.20 2.504.50 3.203.20 2.504.50 3.203.20 1.603.20 2.504.50 3.205.70 5.00Part NumberThicknessMax. (mm)RatedVoltage(Vdc)CapacitanceToleranceCapacitanceTCCodeTemperatureCharacteristicsSize L W(mm)mark means packaging code. If you want to learn the code or quantity in detail, please see p 81.High VoltageCapacitorsCodeEIACodeL W T BWDimension(mm)0.85(0.15)1.10(0.15)1.60(0.20)0.500.3/-0.33.200.20 1.600.20120631Suitable for the trigger of the flash circuitHighly reliable performanceSuperior in bias characteristicsSoft termination with a Ni/Sn plated overcoatStrobe Circuit FeatureApplicationStructure and DimensionCapacitance Table (Camera Strobe Circuit Capacitors)Camera StrobeCircuit CapacitorsFeature Capacitance TableArray TypeCapacito rsProduct Line Up (Array Type Capacitors)FeatureLow ESLCapacitorsCapacitance Table (Low ESL Capacitors)Product Line Up (Low ESL Capacitors)Low ESL CapacitorsReliability TestConditionReliability Test ConditionPremium Capacitors for Automotive ApplicationsPart Numbering System (Automotive Capacitors)Premium Capacitorsfor AutomotiveApplicationsFeatureCapacitance Table (Automotive Capacitors)Premium Capacitorsfor AutomotiveApplicationsProduct Line Up (Automotive Capacitors)Product Line Up (Automotive Capacitors)Premium Capacitorsfor AutomotiveApplicationsProduct Line Up (Automotive Capacitors)CL21C221JC6*PN CL21C331JC6*PN CL21C471JCC *PN CL21C681JCC *PN CL21C102JCC *PN CL21C102JCF *PN CL21C122JBC *PN CL21C152JBC *PN CL21C182JBC *PN CL21C222JBC *PN CL21C272JBC *PN CL21C332JBC *PN CL21C392JBC *PN CL21C472JBC *PN CL21C562JBC *PN CL21C122JBF *PN CL21C152JBF *PN CL21C182JBF *PN CL21C222JBF *PN CL21C272JBF *PN CL21C332JBF *PN CL21C392JBF *PN CL21C472JBF *PN CL21C562JBF *PN CL21C682JBF *PN CL21C822JBF *PN CL21C103JBF *PNC0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA)C0G(EIA))220 330 470680 1.0 1.0 1.21.5 1.82.2 2.73.3 3.94.75.6 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.66.8 8.2 10.05% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%1001001001001001005050505050505050505050505050505050505050500.700.700.950.950.951.350.950.950.950.950.950.950.950.950.951.351.351.351.351.351.351.351.351.351.351.351.3530ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 ) 30ppm/ (-55~+125 )30ppm/ (-55~+125 )2.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.25Part Number Thickness Max. (mm)RatedVoltage (Vdc)Capacitance Tolerance CapacitanceTC CodeTemperature CharacteristicsSize L W(mm)Premium Capacitors for Automotive Applications Capacitance Table (Automotive Capacitors)*mark means design code. If you want more information , Please check with our sales representatives or product engineers. mark means packaging code. If you want to learn the code or quantity in detail, please see p 81.CL10B473KO8*PN CL10B683KO8*PN CL10B104KO8*PN CL10B103KA8*PN CL10B153KA8*PN CL10B223KA8*PN CL10B333KA8*PN CL10B473KA8*PN CL10B683KA8*PN CL10B104KA8*PN CL10B102KB8*PN CL10B152KB8*PN CL10B222KB8*PN CL10B332KB8*PN CL10B472KB8*PN CL10B682KB8*PN CL10B103KB8*PN CL10B153KB8*PN CL10B223KB8*PN CL10B333KB8*PN CL10B473KB8*PN CL10B683KB8*PN CL10B104KB8*PN CL10B102KC8*PN CL10B152KC8*PN CL10B222KC8*PN CL10B332KC8*PN CL10B472KC8*PN CL10B682KC8*PN CL10B103KC8*PN CL10B221KC8*PN CL10B331KC8*PN CL10B471KC8*PNCapacitance Product Line Up (Automotive Capacitors)Part Number ThicknessMax. (mm)0.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.900.90Capacitance Tolerance Size L W (mm)RatedVoltage(Vdc)Temperature CharacteristicsTC Code10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10%47 68 100 10 15 22 33 47 68 100 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 1.0 1.5 2.2 3.3 4.7 6.8 10 220 330 4701.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.801.60 0.80X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 )1616162525252525252550505050505050505050505050100100100100100100100100100100Premium Capacitors for Automotive Applications CL10B681KC8*PN CL21B104KOC *PN CL21B154KOF *PN CL21B224KOF *PN CL21B334KOF *PN CL21B474KOF *PN CL21B473KAC *PN CL21B683KAC *PN CL21B104KAC *PN CL21B154KAF *PN CL21B224KAF *PN CL21B334KAF *PN CL21B474KAF *PN CL21B102KB6*PN CL21B152KB6*PN CL21B222KB6*PN CL21B332KB6*PN CL21B472KB6*PN CL21B682KB6*PN CL21B103KB6*PN CL21B153KB6*PN CL21B223KB6*PN CL21B333KBC *PN CL21B473KBC *PN CL21B683KBC *PN CL21B104KBC *PN CL21B104KBF *PN CL21B154KBF *PN CL21B224KBF *PN CL21B334KBF *PN CL21B474KBF *PN CL21B102KC6*PN CL21B152KC6*PNCapacitance Product Line Up (Automotive Capacitors)Part Number ThicknessMax. (mm)0.900.951.351.351.351.350.950.950.951.351.351.351.350.700.700.700.700.700.700.700.700.700.950.950.950.951.351.351.351.351.350.700.70Capacitance Tolerance Size L W (mm)RatedVoltage(Vdc)Temperature CharacteristicsTC Code10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10%680 100 150 220 330 470 47 68 100 150 220 330 470 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 100 150 220 330 470 1.0 1.51.60 0.802.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.252.00 1.25X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)X7R(EIA)15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 ) 15%(-55~+125 )100161616161625252525252525505050505050505050505050505050505050100100*mark means design code. If you want more information , Please check with our sales representatives or product engineers. mark means packaging code. If you want to learn the code or quantity in detail, please see p 81.*mark means design code. If you want more information , Please check with our sales representatives or product engineers. mark means packaging code. If you want to learn the code or quantity in detail, please see p 81.。
第五部分 技术规格书
模块
机箱同品牌； 支持 NPIV，可部署在异构 SAN 环境中； 端口延迟≤4 ms，背板带宽≥320 Gbps； 单台交换机提供≥14 个对内 8Gb 全双工 FC 端口， 提供≥16 个对 外 FC 端口，可配置 8Gb SFP+或 4Gb SFP 模块，支持 2Gb/4Gb/8Gb 速率； 所有外部激活端口需配置 8Gbps SFP+模块及 LC-LC 光纤线缆 机箱管理模块 内置 1 个机箱管理模块，提供远程仿真图形界面管理，支持远程 状态监控，故障告警，电源能耗控制，微码更新，机箱与计算节 点批量初始化配置，网络与交换机管理，资产管理等功能； 光通路诊断及故 集成 IMM 光通路诊断功能，提供服务器、处理器、内存、电源、 障前预警功能 风扇、交换模块、管理模块、硬盘及各类扩展卡的光通路诊断及 故障前预警功能（提供产品彩页证明） 服务及授权 投标时提供原厂商针对本项目的售后服务承诺函，提供原厂商 3 年 7*24 免费上门，4 小时快速响应服务
堆叠
交换带宽 帧大小 扩展要求 产品附件 售后服务
5、监控中心存储（2 台） 指标项 外型 控制器类型 数据 CACHE 硬件异或 RAID 级别 Stripe Size 机架式 3U、16 盘位 64 位 RISC 处理器 2GB 是 0、1(0+1)、3、5、6、1 0、30、50、60 及 JBOD 16KB～1MB 技术规格要求
从 《全国信息 安全等级保 护测评机构 推荐目录》 中 选择评测机 构
符合国家相关部门、全国 法院系统等级保护定级测 评相关规定。及时完成等 级测评工作，并实现与公 安主管部门工作衔接。
1:刀片机箱（1 台） 指标项 品牌 总体要求 国际知名品牌 支持 x86 服务器虚拟化，且可以通过一套管理平台统一调度管 理； 支持半宽（高）和全宽（高）服务器和内置存储系统混合部署； 支持管理节点, 管理节点中的软件固化, 免维护 支持内置企业级磁盘阵列，支持存储虚拟化技术，可将异构多品 牌 SAN 存储环境整个成存储资源池统一规划使用 机架安装高度≥10U 无源背板， 为每台服务器节点提供不少于 2 个冗余的 I/O 接口, 背 板提供节点通风风道 每机箱≥14 台服务器节点 技术规格要求
三星 数字液晶电视 说明书
数字液晶电视使用说明书%1 $yyyyyyyyyyyy请确保本产品始终远离蜡烛或其他明火电视机数字机顶盒连接方式:y1.将插头2与有线电视线端接口连接2.将插头1与电视信号线连接3.电视信号线与机顶盒连接电视电视机⬉⑤ ⼎♃䘹 Ӵ 㡖Ⳃ⑤ 乍Ⳃ䷇䞣 乥䘧P4 5 6 7 Discovery DiscoveryH& - Ҟ 800 five乥䘧㾚 - ⬉㾚18:30 19:15 Today Today 800 five乘㑺㡖Ⳃ㾚 c 11futech c 2* 15abc13 BBC World 23 33 Boonerang32 Cartoon Nwk A 5Class News A 4 \ Coming Soon A 27Discover y䚼⬉㾚Ҫ㒓 㒓B㓽 䗝k 义 T乥䘧r lͩu使用遥控器与频道列表中相应的彩色按钮。
y c 11futech c 2* 15abc1 3 BBC World 23 33 Boonerang32 Cartoon Nwk A 5 Class News A 4 \ Coming Soon A 27Discover y䚼⬉㾚Ҫ㒓 㒓B㓽 䗝k 义 T乥 䘧lͩabc1 BBC World Boonerang 㓪䕥 ⱘ乥䘧䫕 㓪䕥乥䘧㓪 䰸䗝 䚼 ⳟ䗝乍㡆⏽: ℷ ►: 16:9䷇Ⓒ⊶ : 㞾MPEG ䷇Ⓒ⊶ : 㞾HDMI 咥㡆ㄝ㑻: ℷ⬉ :100Hz Motion Plus :▼U⿏ E ⹂䅸 R 䖨在yPCy模式下，您只能变更图像选项项目中的色温、尺寸和自动保护时间。
色温（冷/正常/暖1/暖2）调整后的设置将根据其输入模式进行储存。
暖1和暖2在动态模式下不可选。
尺寸：您可以根据您的观看要求选择最合适的图像尺寸。
16:9：将图像尺寸调整为16:9。
宽幅放大：y利用垂直扩展把4:3图像变化为16:9图像模式。
y 放大：垂直放大16:9宽屏幕以适合屏幕尺寸。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
℃ 23A(at 25 ), 60% at 250 cycle
2.5V
3.10 Cell weight
45.0g max
3.11 Cell dimension
3.12 Operating temperature (surface temperature)
charge. Standard rated discharge capacity
≥ 1,450mAh
7.3 Initial internal impedance
Initial internal impedance measured at AC 1kHz after standard charge.
Percentage as an index of the capacity at 25 (=1,450mAh) is 100%. 7.5 Temperature dependence of charge capacity
- 2/14 -
-SAMSUNG SDI Confidential Proprietary –
℃ measured with discharge current of 1500mA with 2.5V cut-off at 25 within 1hour
after the standard charge. Standard discharge capacity
≥ 1,450mAh
7.3 Standard rated discharge capacity
6.2 Measuring equipment
(1) Amp-meter and volt-meter
The amp-meter and volt-meter should have an accuracy of the grade 0.5 or higher.
(2) Slide caliper The slide caliper should have 0.01 mm scale.
℃ 750mA and constant voltage 4.2V 100mA cut-off at .
7.2 Standard discharge capacity
The standard discharge capacity is the initial discharge capacity of the cell, which is
Model.
-SAMSUNG SDI Confidential Proprietary –
INR18650-15M Version No.
Tentative
SPECIFICATION OF PRODUCT
Lithium-ion rechargeable cell for power tools Model name : INR18650-15M
Relative capacity
Charge temperature
0℃ 5℃ 25℃ 45℃ 50℃
80% 90% 100% 95% 95%
Discharge temperature
25℃
Note: If charge temperature and discharge temperature is not the same,
(3) Impedance meter The impedance meter with AC 1kHz should be used.
7. Characteristics
7.1 Standard charge
This "Standard charge" means charging the cell with charge current
Model INR18650-15M Version No.
Tentative
Capacity comparison at each temperature, measured with discharge constant current 10A and 2.5V cut-off after the standard charge is as follows.
Discharge temperature
℃ -20
℃ -10
0℃
25℃
60℃
60%
75%
80%
100%
100%
Note: If charge temperature and discharge temperature is not the same,
℃ the interval for temperature change is 3 hours.
This product specification has been prepared to specify the rechargeable lithium-ion cell
('cell') to be supplied to the customer by Samsung SDI Co., Ltd.
Discharge condition
Current
0.30A
4A
10A
18A
23A
℃ Relative
Capacity
104%
97%
100%
97%
95%
Note: Percentage as an index of the capacity at 25 (=1,450mAh) is 100%.
7.8 Cycle life Each cycle is an interval between the charge (charge current 750mA) with 100mA cut-off and the discharge (discharge current 23A) with 2.5V cut-off.
-SAMSUNG SDI Confidential Proprietary –
Model INR18650-15M Version No.
Tentative
4. Outline dimensions See the attachment (Fig. 1)
5. Appearance There shall be no such defects as scratch, rust, discoloration, leakage which may adversely affect commercial value of the cell.
Current
0.75A
Charge condition
Rapid 4A
Cut-off
100mA
100mA
℃ Relative
Capacity
100%
98%
Note: Percentage as an index of the discharge capacity at 25 and 750mA charging
6. Standard test conditions 6.1 Environmental conditions Unless otherwise specified, all tests stated in this specification are conducted at
± ℃ ± temperature 25 5 and humidity 65 20%.
CC-CV (100mA cut-off)
Standard charge: 0.75A Rapid charge: 4A
3.7 Charging time
3.8 Max. discharge current (continuous)
3.9 Discharge cut-off voltage
℃ Standard charge : 150min
2. Description and model
2.1 Description
lithium-ion rechargeable cell, NMC version
2.2 Model name
INR18650-15M
3. Nominal specifications
Item
Specification
3.1 Nominal discharge capacity 1,500mAh (300mA, 2.5V discharge)
Note (1): If the cell is kept as ex-factory status (50% of charge),
the capacity recovery rate is more than 90% of standard discharge capacity.
- 1/14 -
℃ the interval for temperature change is 3 hours.
Percentage as an index of the capacity at 25 (=1,450mAh) is 100%. 7.6 Charge rate capabilities
Discharge capacity is measured with constant current 10A and 2.5V cut-off after the cell is charged with 4.2V as follows.
(=1,450mAh) is 100%. 7.7 Discharge rate capabilities
Discharge capacity is measured with the various currents in under table and 2.5V cut-off after the standard charge.