RS-PDdesignphilosophy全新的第六代PDSSD及TD系列-Daum
BD系列 闭式回路轴向柱塞传动单元 产品样本说明书
MAKING MODERN LIVING POSSIBLE产品样本BD系列闭式回路轴向柱塞传动单元产品样本BD系列 闭式回路轴向柱塞传动单元11012499 • AC • Jul 20109-2版本说明版本历史B D 系列 闭式回路轴向柱塞传动单元产品样本BD系列 闭式回路轴向柱塞传动单元11012499 • AC • Jul 20109-3BD 系列静液传动单元 .............................................................................................................................9-5BDU-10 S ,原理图 ....................................................................................................................................9-6BDU-21 L ,原理图.....................................................................................................................................9-7系统示意图, BDU-06/10S ........................................................................................................................9-8系统示意图, BDU-06/10S ........................................................................................................................9-8系统示意图, BDU-10L/21L/21H ............................................................................................................9-9系统示意图, BDU-10L/21L/21H, BDP-10L..........................................................................................9-9特征及可选项............................................................................................................................................9-10工作参数 .....................................................................................................................................................9-11传动油规格 ................................................................................................................................................9-11效率曲线 , BDU-06S, 10S ........................................................................................................................9-12效率曲线 , BDU-10L/21L, 21H, BDP-10L ...........................................................................................9-13概况 ...............................................................................................................................................................9-14输入速度 .....................................................................................................................................................9-14系统压力 .....................................................................................................................................................9-14补油压力 .....................................................................................................................................................9-15补油入口压力............................................................................................................................................9-15壳体压力 .....................................................................................................................................................9-15液压油 ..........................................................................................................................................................9-15温度及粘度 ................................................................................................................................................9-16液压油及过滤器.......................................................................................................................................9-17油箱 ...............................................................................................................................................................9-17控制轴作用力............................................................................................................................................9-17独立刹车系统............................................................................................................................................9-17主轴负载 .....................................................................................................................................................9-18轴选项 ..........................................................................................................................................................9-19旁通阀 ..........................................................................................................................................................9-21高压溢流阀(HPRV)及补油单向阀 (过压保护) ..............................................................................9-21带阻尼孔补油单向阀 .............................................................................................................................9-22可选集成油箱............................................................................................................................................9-24过滤器 ..........................................................................................................................................................9-24风扇 ...............................................................................................................................................................9-24概述工作参数系统设计参数特征及可选项技术规格目录产品样本BD系列 闭式回路轴向柱塞传动单元11012499 • AC • Jul 20109-4元件选型型号代码推荐安装及保养维护安装图纸最高系统压力............................................................................................................................................9-25 输入功率 .....................................................................................................................................................9-26 元件寿命 .....................................................................................................................................................9-27BDU 型号代码 ...........................................................................................................................................9-29 BDP 型号代码............................................................................................................................................9-31 壳体安装 .....................................................................................................................................................9-32 轴安装 ..........................................................................................................................................................9-32样机调试程序............................................................................................................................................9-32操作 ...............................................................................................................................................................9-32保养维护 .....................................................................................................................................................9-32BDU-06S .......................................................................................................................................................9-33 BDU-10S .......................................................................................................................................................9-35BDU-10L .......................................................................................................................................................9-35BDU-21L .......................................................................................................................................................9-39BDU-21H ......................................................................................................................................................9-39BDP-10L .......................................................................................................................................................9-43可选风扇 .....................................................................................................................................................9-43目录B D 系列 闭式回路轴向柱塞传动单元产品样本BD系列 闭式回路轴向柱塞传动单元11012499 • AC • Jul 20109-5BD 系列静液传动单元适应用于能量的传递及控制。
Agilent E364xA系列可编程DC电压源数据手册说明书
Agilent Technologies E3640A – E3649A Programmable DC Power SuppliesData SheetGreat Performance, Outstanding Price With 30 to 100W of output power, the Agilent E364xA-series ofprogrammable DC power supplies provide great performance at a great price. All ten models deliver clean power, dependable regulation, fast transient response and built-in GPIB and RS-232 interfaces. They’re designed to meet the needs of R&D design verification, production testing, QA verifications and other demandingapplications with Agilent Technologies’quality and reliability.Steady OutputWith 0.01 percent load and line regulation, Agilent E364xA power supplies keep output steady when power line and load changes occur.They also specify low normal mode voltage noise and low common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode currentprovides isolation from power line current injection. Agilent E364xA power supplies specify less than 90msec of voltage settling time at any output load condition.Remote InterfaceAgilent E364xA power supplies support any PC with a GPIB (IEEE-488) card or RS-232 interface. Every model ships standard with both GPIB and RS-232.Easy-to-use SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. The user manual provides information for beginning programmers, yet includes enough detail to help veteran programmers as well. Broad SupportVXIplug&play software drivers are available for Agilent VEE and National Instruments LabView™ andLabWindows™, simplifying integration of the E364xA into your test system.The drivers are supported under Microsoft ®Windows 98®and NT.®Front Panel OperationAn easy-to-use rotary knob and self-guiding keypads allow you to quickly and easily set output at the resolution you need. Voltage and current levels can be set to a maximum resolution of 10mV/1 mA from the front panel. Up to five complete power supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero. Dual output models allow two voltages or currents to be displayed simultaneously. Versatile PowerAgilent E364xA power supplies give you the flexibility to select from dual output ranges. Output load is protected against overvoltage, which is easily monitored and adjusted from the front panel and remote interface. Remote sensing is available in the rear terminal to eliminate errors due to voltage drops on the load leads. These power supplies offer new versatile bindingClean Programmable Power Supplies • Single and Dual Output • Dual Output Ranges • 30W to 100W Output Power • Front and Rear Output Terminals • Over-voltage Protection • Remote Sense• GPIB and RS-232 Standardposts on the front panel and screw-type terminals on the rear panel. New front panel binding posts allow you to use safety test leads as well as conventional banana clips and stripped wires. An optional rackmount kit is available. The Agilent E364xA series employs a cooling fan with automatic speed control for reduced acoustic noise. LabView and LabWindows are registered trademarks ofNational Instruments.Microsoft, Windows 98 and Windows NT are US registered trademarks of Microsoft Corp.Highly visible vacuum flourescent displaySelectable dual range provides flexibility and convenience3-year warranty protects yourBuilt-in GPIB and RS-232 interfaces Rotary knob for quick and analog-like control of voltage and currentVersatile binding posts offer flexibility to use safety test leads, banana plugs orRear output and sensing terminals Cooling fan with automatic speed control for low acoustic noiseTough handlefor easycarriage andunit prop-up2Agilent E3640A – E3649A Programmable DC Power Supply SpecificationsModel Number E3640A E3641A E3642A E3643A E3644A E3645AMaximum Power30W50W80W# of Output111111DC Output Rating0 to 8V/3A or0 to 35V/0.8A or0 to 8V/5A or0 to 35V/1.4A or 0 to 8V/8A or0 to 35V/2.2A or(@ 0°C to 40°C)0 to 20V/1.5A0 to 60V/0.5A0 to 20V/2.5A0 to 60V/0.8A0 to 20V/4A0 to 60V/1.3ANet Weight 5.3kg (11.7 lbs) 6.2kg (13.7 lbs) 6.7 kg (14.7 lbs)Dimension254.4mmW x 103.6mmH x 374mmD (10 x 4.1 x 14.7 in)Model Number E3646A E3647A E3648A E3649AMaximum Power60W100W# of Output2222DC Output Rating Two Two Two Two (@ 0°C to 40°C)0 to 8V/3A or0 to 35V/0.8A or 0 to 8V/5A or0 to 35V/1.4A or0 to 20V/1.5A0 to 60V/0.5A0 to 20V/2.5A60V/0.8ANet Weight7.3kg (16.1 lbs)9.2kg (20.3 lbs)Dimension228mm W x 133mm H x 374mm D (8.9 x 5.2 x 14.7 in)Load1and Line Regulation±(% of output + offset)Voltage<0.01% + 3mVCurrent<0.01% + 250uARipple and Noise(20Hz to 20MHz)Normal Mode Voltage<5mVpp/0.5mVrms for 8V/20V models<8mVpp/1mVrms for 35V/60V modelsNormal Mode Current<4mArmsCommon Mode Current<1.5uArmsAccuracy 12 Months (@ 25 °C ±5 °C), ±(% output + offset)ProgrammingVoltage<0.05% + 10mV (<0.1% + 25mV for output 2 of E3646/47/48/49A)Current<0.2% + 10mAReadbackVoltage <0.05% + 5mV (<0.1% + 25mV for output 2 of E3646/47/48/49A)Current<0.15% + 5mA (<0.15% + 10mA for output 2 of E3646/47/48/49A)ResolutionProgram<5mV / 1mAReadback<2mV / 1mAMeter10mV / 1mATransient Response Less than 50µsec for output to recover to within 15mV following a change in outputcurrent from full load to half load or vice versa.Settling Time 2<90msecOVPAccuracy,<0.5% + 0.5V±(% output + offset)Activation time3<1.5msec, OVP≥3V / <10msec, OVP< 3VTemperature Coefficient per °C±(% output + offset)Voltage<0.01% + 3mV (<0.02% + 5mV for output 2 of E3646/47/48/49A)Current<0.02% + 3mAStability, constant output & temperature ±(% of output + offset), 8 hrsVoltage <0.02%+2mVCurrent<0.1% + 1mARemote Sense 1VMax voltage drop in each load leadAC Input 100Vac ±10% (Opt 0E9) / 115Vac ±10% (Std) / 230Vac ±10% (Opt 0E3)(47Hz – 63Hz)Warranty 3 yearsProduct Regulation Designed to comply with UL3111-1; certified to CSA 22.2 No. 1010.1; conforms toIEC 1010-1; complies with EMC directive 89/336/EEC(Group1, Class A)1With sense terminal connected.2Maximum time required for the output voltage to change from 1% to 99% or vice versa following the receipt of VOLTage orAPPLy command via direct GPIB or RS-232 interface.3Average time for output to start to drop after OVP condition occurs.3sliding support shelf Shelf (P/N 5063-9256) Slide Kit (P/N 1494-0015)Data subject to change.© Agilent Technologies 2000 Printed in the U.S.A. 02/00 5968-7355EN。
2N7002A N型增强模MOSFET产品说明书
Product SummaryV(BR)DSS R DS(ON) maxI D maxT A = +25°C60V 6Ω @ V GS = 5V 200mA DescriptionThis MOSFET has been designed to minimize the on-state resistance (R DS(ON)) and yet maintain superior switching performance, making it ideal for high efficiency power management applications.Applications∙ MotorControl∙Power Management Functions Features and Benefits∙ N-ChannelMOSFET∙ LowOn-Resistance∙Low Gate Threshold Voltage∙Low Input Capacitance∙Fast Switching Speed∙Small Surface Mount Package∙ESD Protected Gate, 1.2kV HBM∙Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)∙Halogen and Antimony Free. “Green” Device (Note 3)∙Qualified to AEC-Q101 Standards for High Reliability Mechanical Data∙ Case:SOT23∙Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0∙Moisture Sensitivity: Level 1 per J-STD-020∙ Terminals:Finish− Matte Tin annealed over Alloy 42leadframe. Solderable per MIL-STD-202, Method 208∙Terminal Connections: See Diagram∙Weight: 0.008 grams (approximate)Ordering Information(Note 4)Part Number Case Packaging2N7002A-7 SOT23 3,000/Tape & Reel2N7002A-13SOT23 10,000/Tape & ReelNotes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant2. See /quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"and Lead-free.3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and<1000ppm antimony compounds.4. For packaging details, go to our website at /products/packages.html.SOT23Top View Equivalent CircuitTop ViewPin-Out ESD PROTECTED TO 1.2kVe3Marking InformationDate Code KeyYear 2008 2009 2010 2011 2012 2013 2014 2015 Code V W X Y Z A B CMonth Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov DecCode 1 2 3 4 5 6 7 8 9 O N DMaximum Ratings (@T A = +25°C, unless otherwise specified.)Characteristic Symbol Value UnitsDrain-Source Voltage V DSS 60 VGate-Source VoltageV GSS ±20 V Continuous Drain Current (Note 5) V GS = 10VSteady State T A = +25°C T A = +85°C T A = +100°C I D180130 115 mAContinuous Drain Current (Note 6) V GS = 10V Steady StateT A = +25°C T A = +85°C T A = +100°CI D 220 160 140mAMaximum Continuous Body Diode Forward Current (Note 6) I S 0.5 A Pulsed Drain Current (10µs pulse, duty cycle = 1%) I DM800 mAThermal Characteristics (@T A = +25°C, unless otherwise specified.)Characteristic Symbol ValueUnitsTotal Power Dissipation (Note 5)P D370 mW (Note 6) 540 Thermal Resistance, Junction to Ambient (Note 5) R θJA348°C/W (Note 6) 241 Thermal Resistance, Junction to Case (Note 6)R θJC 91 Operating and Storage Temperature RangeT J, T STG-55 to +150°CNotes:5. Device mounted on FR-4 PCB, with minimum recommended pad layout6. Device mounted on 1” x 1” FR-4 PCB with high coverage 2oz. Copper, single sided.MN1 = Product Type Marking Code YM = Date Code Marking for SAT (Shanghai Assembly/ Test site) = Date Code Marking for CAT (Chengdu Assembly/ Test site) Y or = Year (ex: A = 2013) M = Month (ex: 9 = September) Shanghai A/T Site Chengdu A/T Site YM Y MN1Y MElectrical Characteristics (@T A = +25°C, unless otherwise specified.)Characteristic SymbolMin Typ Max Unit Test Condition OFF CHARACTERISTICS (Note 7)Drain-Source Breakdown VoltageBV DSS 60 70 − V V GS = 0V, I D= 10µA Zero Gate Voltage Drain Current @ T C = +25°C @ T C = +125°C I DSS − − 1.0 500µAV DS = 60V, V GS = 0VGate-Body LeakageI GSS − − ±10 µA V GS = ±20V, V DS = 0V ON CHARACTERISTICS (Note 7) Gate Threshold VoltageV GS(th)1.2 −2.0 V V DS = V GS , I D= 250µA Static Drain-Source On-Resistance@ T J = +25°C@ T J = +125°CR DS(ON)− 3.53.0 6 5 Ω V GS = 5.0V, I D = 0.115A V GS = 10V, I D =0.115A Forward Transconductanceg FS 80 − − mS V DS = 10V, I D = 0.115ADYNAMIC CHARACTERISTICS (Note 8) Input Capacitance C iss − 23 − pF V DS = 25V, V GS = 0V, f = 1.0MHz Output CapacitanceC oss − 3.4 − pF Reverse Transfer Capacitance C rss − 1.4−pFGate ResistanceR G − 260 400 Ω V DS = 0V, V GS = 0V, f = 1.0MHz SWITCHING CHARACTERISTICS (Note 8) Turn-On Delay Time t D(ON) − 10 − ns V DD = 30V, I D = 0.115A, R L = 150Ω, V GEN = 10V , R GEN = 25Ω Turn-Off Delay Timet D(OFF)−33−nsNotes: 7. Short duration pulse test used to minimize self-heating effect.8. Guaranteed by design. Not subject to product testing.Fig. 2 Typical Transfer CharacteristicsV , GATE SOURCE VOLTAGE (V)GS I , D R A I N C U R R E N T (A )D 0.11Fig. 3 On-Resistance vs. Drain Current & Gate Voltage I , DRAIN-SOURCE CURRENT (A)D R , S T A T I C D R A I N -S O U R CE O N -R E S I S T A N C E ()D S (O N ) 123456789Fig. 5 Gate Threshold Variation vs. Ambient TemperatureT , AMBIENT TEMPERATURE (°C)A V , G A T E T H R E S H O L D V O L T A G E (V )G S (T H )Fig. 6 Typical T otal CapacitanceV , DRAIN-SOURCE VOLTAGE (V)DS C , C A P A C I T A N C E (p F )T 10100Fig. 7 Reverse Drain Current vs. Source-Drain VoltageV , SOURCE-DRAIN VOLTAGE (V)SD I , S O U R C E C U R R E N T (A )SPackage Outline DimensionsPlease see AP02002 at /datasheets/ap02002.pdf for latest version.Suggested Pad LayoutPlease see AP02001 at /datasheets/ap02001.pdf for the latest version.SOT23Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.0130.10 0.05 K 0.903 1.10 1.00 K1 - - 0.400 L 0.45 0.61 0.55 M 0.0850.18 0.110° 8°- All Dimensions in mmDimensions Value (in mm) Z2.9X 0.8 Y 0.9 C 2.0 E 1.35 X E YCZIMPORTANT NOTICEDIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated.LIFE SUPPORTDiodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:A. Life support devices or systems are devices or systems which:1. are intended to implant into the body, or2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in thelabeling can be reasonably expected to result in significant injury to the user.B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause thefailure of the life support device or to affect its safety or effectiveness.Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.Copyright © 2013, Diodes Incorporated。
PTS120660V010 PTC熔断器数据手册说明书
4397Product features• Positive Temperature Coefficient (PTC)• SMT resettable fuse • Low resistance • Fast time-to-trip• Voltage range 6 V to 60 V • Current range from 0.05A to 2.0A • 1206 (3216 metric) compact footprint •Moisture sensitivity level (MSL): 1Applications• USB peripherals•Plug and play protection for motherboards and peripherals • Power tools• Battery and port protection for mobile/smart phones • Game console port protection • Set-top-boxes•Tablets, notebooks, netbooks, laptops and desktops• Rechargeable battery packs •Digital cameras• Appliances and white goods •Consumer electronicsAgency information• cURus Recognition file number: E343021•TUV: R50192872PTS1206SMD PTC fusesPb HALOGENHF FREEEnvironmental compliancePart number/orderingPTS120660V010• PT= PTC fuse • S= Surface mount • 1206= size code•60V= Maximium dc voltage rating •010= Ihold rating (010=0.10 A2Technical Data 4397Effective November 2021PTS1206SMD PTC fuses/electronicsProduct specificationsVmax 1lmax 2lhold 3ltrip 4Pd 5Time to trip (maximum)Resistance Agency informationPart Number7(V dc )(A)(A)(A)typical (W)(A)(seconds)Initial (R i )minimum (Ω)1maximum (Ω)PartmarkingcURus TUVPTS120660V005601000.050.150.40.25 1.5 3.650TH x x PTS120660V010601000.100.250.40.5 1.0 1.615TY x x PTS120630V012301000.120.290.510.2 1.46TJ x x PTS120630V016301000.160.370.510.3 1.1 4.5TK x x PTS120624V020241000.200.420.680.10.65 2.6TL x x PTS120616V025161000.250.500.680.080.55 2.3TN x x PTS120616V035161000.350.750.680.10.25 1.2TP x x PTS12066V05061000.50 1.00.680.10.150.7TQ x x PTS120615V050151000.50 1.00.680.10.150.7TQ1x x PTS12066V07561000.75 1.50.680.10.090.29TR x x PTS12066V1006100 1.0 1.80.880.30.060.21TS x x PTS12066V1106100 1.1 2.20.880.10.070.2TU x x PTS12066V1506100 1.5 3.00.880.30.040.12TV x x PTS12066V20061002.03.51.081.50.020.08TXxxRecommended pad layout–mmDimensions–mm 1. Vmax: Maximum continuous voltage the device can withstand without damage at current 2. Imax: Maximum fault current the device can withstand without damage at rated voltage 3. Ihold: Maximum current the device will pass without interruption at +23 °C still air4.Itrip: Minimum current that will transition the device from low resistance to high resistance at +23 °C still air5. Pd: Power dissipated from the device when in tripped state at +23 °C still air6. R i : Minimum resistance of the device at +23 °CR 1: Maximum resistance of the device when measured one hour post reflow at +23 °C 7. Part Number Definition: PTS1206xVxxx PTS1206 = Product code and size xV = Voltage rating (Vmax) xxx = Ampere rating (Ihold)Part numberAminimum Amaximum Bminimum Bmaximum Cminimum Cmaximum Dminimum Dmaximum Eminimum EmaximumF G HPTS120660V005 3.00 3.50 1.50 1.800.500.900.1800.500.100.45 2.0 1.0 1.9PTS120660V010 3.00 3.50 1.50 1.800.500.900.1800.500.100.45 2.0 1.0 1.9PTS120630V012 3.00 3.50 1.50 1.800.350.680.1800.500.100.45 2.0 1.0 1.9PTS120630V016 3.00 3.50 1.50 1.800.280.680.1800.500.100.45 2.0 1.0 1.9PTS120624V020 3.00 3.50 1.50 1.800.280.680.1800.500.100.45 2.0 1.0 1.9PTS120616V025 3.00 3.50 1.50 1.800.280.680.1800.500.100.45 2.0 1.0 1.9PTS120616V035 3.00 3.50 1.50 1.800.280.680.1800.500.100.45 2.0 1.0 1.9PTS12066V050 3.00 3.50 1.50 1.800.280.680.1800.500.100.45 2.0 1.0 1.9PTS120615V050 3.00 3.50 1.50 1.800.28 1.060.1800.500.100.45 2.0 1.0 1.9PTS12066V075 3.00 3.50 1.50 1.800.280.680.1800.500.100.45 2.0 1.0 1.93Technical Data 4397Effective November 2021PTS1206SMD PTC fuses /electronicsTime to trip curves at +23ºCT emperature derating curve4Technical Data 4397Effective November 2021PTS1206SMD PTC fuses/electronicsGeneral specificationsOperating temperature: -40 °C to + 85 °C (with derating)Storage temperature: -10 °C to + 40 °C Storage relative humidity: 75%Storage conditon: Keep away form corrosive atmosphere and sunlight Storage duration: 1 yearThermal shock: (20 cycles - 40 °C to + 85 °C) -33% typical resistance change Humidity: +85 °C, 85% relative humidity, 1000 hours ±5% typical resistance change Resistance to solvents: MIL-STD- 202 Method 215Packaging information-mmSupplied in tape and reel packaging, 5000 parts per 7.0” diameter reel (EIA-481 compliant)PTS120630V012, PTS120630V016, PTS120624V020, PTS120616V025, PTS120616V035, PTS12066V050, PTS12066V075, PTS120660V005,PTS120660V010, PTS12066V100, PTS12066V110Section A–AUser Direction of FeedEatonElectronics Division 1000 Eaton Boulevard Cleveland, OH 44122United States/electronics© 2021 EatonAll Rights Reserved Printed in USAPublication No. 4397 PCN21026, PCN21027November 2021Technical Data 4397Effective November 2021PTS1206SMD PTC fuses Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express writtenapproval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin.Solder reflow profileTable 1 - Standard SnPb solder (T c )Package thicknessVolume mm3 <350Volume mm3 ≥350<2.5 mm)235 °C 220 °C ≥2.5 mm220 °C220 °CTable 2 - Lead (Pb) free solder (T c )Package thicknessVolume mm 3 <350Volume mm 3350 - 2000Volume mm 3 >2000<1.6 mm 260 °C 260 °C 260 °C 1.6 – 2.5 mm 260 °C 250 °C 245 °C >2.5 mm250 °C245 °C245 °CT e m p e r a t u r eT LT PEaton is a registered trademark.All other trademarks are property of their respective owners.Follow us on social media to get the latest product and support information.Reference J-STD-020Profile featureStandard SnPb solderLead (Pb) free solderPreheat and soak • Temperature min. (T smin )100 °C 150 °C • Temperature max. (T smax )150 °C 200 °C • Time (T smin to T smax ) (t s )60-120 seconds 60-120 seconds Ramp up rate T L to T p3 °C/ second max. 3 °C/ second max.Liquidous temperature (T l ) Time (t L ) maintained above T L183 °C60-150 seconds 217 °C60-150 seconds Peak package body temperature (T P )*Table 1Table 2Time (t p )* within 5 °C of the specified classification temperature (T c )20 seconds*30 seconds*Ramp-down rate (T p to T L ) 6 °C/ second max. 6 °C/ second max.Time 25 °C to peak temperature6 minutes max.8 minutes max.* Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum.。
诺基亚 Nokia 手机用户指南说明书
PhilipsDVD home theater systemSpectacular surround sound with superb clarityJust like in the moviesExperience sensational home entertainment with the powerful surround sound deliveredby this sytem. Enjoy endless entertainment with Karaoke Scoring, playback from USBdrives, portable media players and practically any type of disc.Connect and enjoy multiple sources•MP3 Link plays music from portable media players•USB Media Link for media playback from USB flash drivesBrings audio and video to life•DTS, Dolby Digital and Pro Logic II surround sound•Karaoke Scoring for fun and exciting song contests at home•Advanced Class D Amplifier for compact, powerful soundPlays all your movies and music•DivX Ultra Certified for enhanced playback of DivX videos•Plays DivX, MP3, WMA and JPEG digital camera photos•Plays CD, (S)VCD, DVD, DVD+R/RW, DVD-R/RW, DVD+R DL•Built-in FM tunerEasy to set up•Easy-fit™ connectors with color-coding for a simple set-upHighlightsUSB Media LinkThe Universal Serial Bus or USB is a protocol standard that is conveniently used to link PCs, peripherals and consumer electronicequuipment. With USB Media Link, all you have to do is plug in your USB device, select the movie, music or photo and play away.DTS, DolbyDigital, ProLogic llA built-in DTS and Dolby Digital decoder eliminates the need for an external decoder by processing all six channels of audio information to provide a surround sound experience and an astoundingly natural sense of ambience and dynamic realism. Dolby Pro Logic II provides five channels of surround processing from any stereo source.DivX Ultra CertifiedWith DivX support, you are able to enjoy DivX encoded videos in the comfort of yourliving room. The DivX media format is an MPEG4-based video compression technology that enables you to save large files like movies, trailers and music videos on media like CD-R/RW, and DVD recordable discs. DivX Ultra combines DivX playback with great features like integrated subtitles, multiple audiolanguages, multiple tracks and menus into one convenient file format.Karaoke ScoringAdd a dash of fun to your Karaoke sessions with Karaoke Scoring. Allow your performance to be judged for furtherimprovement, or for friendly competitions. Karaoke Scoring automatically rates your singing and gives you a humorous picture that is tied to how well you did. The fun never ends.Plays it allPlay virtually any media format you want - whether they be DivX, MP3s, WMA or JPEGs. Experience the unbeatable convenience of great playability, and the luxury of sharing media files on your TV or home theater system - in the comfort of your living room.Plays it allPlay virtually any disc you want - whether they be CDs, (S)VCDs, DVDs, DVD+R, DVD-R, DVD+RW, DVD-RW or DVD+R DL. Experience unbeatable flexibility and the convenience of playing all your discs on the one device.Advanced Class D AmplifierAdvanced Class D Amplifier for compact, powerful sound Easy-fit™ connectorsColor-coded connectors provide a simple and user-friendly solution to connect the speakers and subwoofer to the center unit of the home entertainment system simply by plugging the connectors in the matching colored interface at the rear of the center unit.200Issue date 2010-07-02 Version: 1.1.712 NC: 8670 000 48759 EAN: 87 12581 45921 5© 2010 Koninklijke Philips Electronics N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. SpecificationsPicture/Display•D/A converter: 12bit, 108MHz•Picture enhancement: Progressive scanSound•Total Power (RMS): 200 W•Output power (RMS): 4 x 25W + 2 x 50W•D/A converter: 24 bit, 192 kHz•Frequency response: 45 - 18000 Hz•Signal to noise ratio: > 60 dB•Sound System: Dolby Digital, Dolby Prologic II, DTS, Stereo•Equalizer settings: Action, Classic, Concert, Drama, Gaming, Lounge, Rock, Sports •Sound Enhancement: Class "D" Digital Amplifier, Night ModeVideo Playback•Compression formats: MPEG1, MPEG2, DivX 3.11, DivX 4.x, DivX 5.x, DivX 6.0, DivX Ultra •Playback Media: DVD-Video, DVD+R/+RW, DVD-R/-RW, Video CD/SVCD, CD-R/CD-RW •Video disc playback system: NTSC, PALAudio Playback•Compression format: MP3, WMA•Playback Media: Audio CD, CD-R/RW, DVD+R/ +RW, DVD-R/-RW, USB flash drive•MP3 bit rates: 32-256 kbps and VBRStill Picture Playback•Picture Compression Format: JPEG •Playback Media: DVD+R/+RW, DVD-R/-RW, CD-R/RW, USB flash drive•Picture Enhancement: Rotate, Zoom, Slideshow with music playbackTuner/Reception/Transmission•Tuner Bands: FM•No. of preset Audio Channels: 40 Connectivity•Rear Connections: Component Video output, Composite video (CVBS) output, AUX in, FM Antenna, Easy-Fit speaker connectors•Front / Side connections: Microphone input 3.5mmjack, MP3 Line-in, USBPower•Power supply: 120/230VAC, 50/60Hz •Standby power consumption: < 1 W•Power consumption: 50 W Loudspeakers•Satellite speaker drivers: 3" full range woofer •Satellite speaker impedance: 4 ohm•Satellite speaker freq range: 150-20000 Hz •Center Speaker: Magnetically shielded •Center speaker drivers: 3" full range woofer •Center speaker impedance: 8 ohm•Center freq range: 150-20000 Hz •Subwoofer driver: 6.5" high efficiency woofer •Subwoofer type: Passive•Subwoofer impedance: 8 ohm•Subwoofer freq range: 45-150 Hz Accessories•Included accessories: Remote Control, 2 x AAA Batteries, CVBS video cable, FM antenna, Quick start guide, User Manual, World Wide Warranty leaflet, Power cordDimensions•Set dimensions(W x H x D): 360 x 55 x 332 mm •Set weight: 2.64 kg•Center speaker dimensions (W x H x D):267 x 100 x 78 mm•Center Speaker Weight: 1.25 kg •Subwoofer dimensions (W x H x D):163 x 363 x 369 mm•Subwoofer Weight: 4.7 kg•Front Speaker Depth: 78 mm•Front Speaker Height: 284.5 mm•Front Speaker Weight: 4.53 kg•Front Speaker Width: 100 mm•Rear Speaker Depth: 75 mm•Rear Speaker Height: 100 mm•Rear Speaker Weight: 0.45 kg•Rear Speaker Width: 100 mm•Packaging dimensions (W x H x D):455 x 421 x 445 mm•Weight incl. Packaging: 12.6 kg。
OFSPDF文件内容:OFSPDF文件内容:OFS InvisiLight Optical Solu
Features • EZ-Bend ® G.657.B3 Optical Fiber with 2.5 mm bend radius • Complete installation kit • Adhesive and Application Tool Product DescriptionOFS InvisiLight ® Optical Solutions offer a revolutionary system that enables fast, easyand virtually invisible optical fiber installations for indoor living units (ILUs) and multipledwelling units (MDUs). The InvisiLight ILU Solution consists of a single optical fiber forfiber-in-the-home (FITH) installations, whereas the InvisiLight MDU Solution consists ofa 12-fiber unit for building hallways.These InvisiLight Optical Solutions eliminate the need for large-form-factor optical fibercables, unsightly staples, wire molding or unreliable tapes. They also make installationsafer by not requiring installers to enter attics or other hard-to-access areas. The installeralso uses a safe, simple and innovative process to adhere the optical fiber, resulting in aprotected link that blends seamlessly into the residential or building décor.Please refer to the InvisiLight Optical Solutions brochure that describes the solutionsin greater detail.Benefits• Corner and décor friendly• Simple and easy installation withminimal tools•Fast, repeatable processInvisiLight ILU Solution installed in a residence InvisiLight MDU Solution installed in a building hallwayInvisiLight ILU Solution - Indoor Living Units Product Overview • Plug and Play • Factory terminated • Auto-slack storage on spool in module • EZ-Bend ® 900 µm buffered fiber compliant with G.657.B3 Fully splice compatible with outstanding macrobending performance (1 turn at 1550 nm):• < 0.1 dB loss at 5 mm bend radius • < 0.2 dB loss at 2.5 mm bend radius • Capable of supporting a maximum of 30 outside and 30 inside corners Standards and Testing • Meets Telcordia GR-326 simplex connector standard • Fiber and adhesive system is UL-1651 compliant • RoHS compliant; free from heavy metals and environmentally friendly. Nonhazardous to human touch and creates negligible waste • Fully tested for compatibility with most wall and ceiling materials (contact OFS for a complete list)• Easily painted with both latex and oil-based paints InvisiLight Adhesive • Opaque color during application; turns clear after approximately 1 hour • Set Time: 15 minutes Tack-Free Time: 45 minutes Full Cure Time: 24 hours depending on temperature, humidity, and thickness of adhesive • Long term storage is best at room temperature. Keep the adhesive tubes from freezing and below +38 ºC. Operating Temperature (Cured): -40 ºC to +60 ºC Installation Temperature:≥ +10 ºC2 | TAKE A CLOSER LOOK Almost invisible to the human eyeInvisiLight ® Optical Solutions InvisiLight ILU Solution - Indoor Living UnitsInvisiLight®Optical Solutions | 3 301083382NVSLGHTC-D-SCASCA-MODULE KIT-05M-EAConnectorized 5-meter spool, six (6) inside and outside corner protectors, modulee/w adapter, four (4) wall plugs and caps, one (1) through-wall tool and instructions 301083390NVSLGHTC-D-SCASCA-MODULE KIT-10M-EAConnectorized 10-meter spool, six (6) inside and outside corner protectors, modulee/w adapter, four (4) wall plugs and caps, one (1) through-wall tool and instructions 301099115NVSLGHTC-D-SCASCA-MODULE KIT-20M-EAConnectorized 20-meter spool, six (6) inside and outside corner protectors, modulee/w adapter, four (4) wall plugs and caps, one (1) through-wall tool and instructions 301099123NVSLGHTC-D-SCASCA-MODULE KIT-30M-EAConnectorized 30-meter spool, six (6) inside and outside corner protectors, modulee/w adapter, four (4) wall plugs and caps, one (1) through-wall tool and instructions 301099131NVSLGHTC-D-SCASCA-MODULE KIT-40M-EAConnectorized 40-meter spool, six (6) inside and outside corner protectors, module 301122099NVSLGHTC-D-SCASCA-80x80 KIT-05M-EAConnectorized 5-meter spool, six (6) inside and outside corner protectors, modulee/w adapter, four (4) wall plugs and caps, one (1) through-wall tool and instructions 301122107NVSLGHTC-D-SCASCA-80x80 KIT-10M-EAConnectorized 10-meter spool, six (6) inside and outside corner protectors, modulee/w adapter, four (4) wall plugs and caps, one (1) through-wall tool and instructions 301117271NVSLGHTC-D-SCASCA-80x80 KIT-20M-EAConnectorized 20-meter spool, six (6) inside and outside corner protectors, modulee/w adapter, four (4) wall plugs and caps, one (1) through-wall tool and instructions 301117289NVSLGHTC-D-SCASCA-80x80 KIT-30M-EAConnectorized 30-meter spool, six (6) inside and outside corner protectors, modulee/w adapter, four (4) wall plugs and caps, one (1) through-wall tool and instructions 301117297NVSLGHTC-D-SCASCA-80x80 KIT-40M-EAConnectorized 40-meter spool, six (6) inside and outside corner protectors, module 301083184NVSLGHTC-TUBE, 30ML ADHESIVE WH/GR-TIP EA30mL adhesive tube301142105NVSLGHTC-TUBE, 55ML ADHESIVE WH/GR-55mL adhesive tube301079109NVSLGHTC-MINI DISPENSING TOOL Dispensing tool for adhesive application301079638NVSLGHTC-TOOL BELT KITTool belt kit includes case, screwdrivers, drill bits, utility knife, visual fault locatorand tape measure301115671NVSLGHTC-Pole Extension Tool InvisiLight pole extension toolThe InvisiLight ILU Solution Kit includes: a module for storing the remaining fiber on the spool, connectorized InvisiLight spool, six (6) outside corner bend limiters, six (6) inside corner bend limiters, four (4) wall plugs and caps, two (2) through-wall tools and installation instructions. The spools contain varying lengths of connectorized fiber up to 40 meters. The adhesive, adhesive application tool and pole extension tool are sold separately.Through-Wall Tooland Package of Four (4) Wall CoversInside and OutsideCorner Protectors(Package of 10 each)Adhesive Dispensing Tooland Adhesive (in tube)80 x 80 Adapter Moduleor Living Unit Entry Pointto connect the ILU to theoutside optical fiberInvisiLight® Optical SolutionsInvisiLight ILU Solution - Ordering GuideLC UPC 0.25/0.55-55 dB -10 to +60 °C > +10 °C LC APC 0.5/0.05-65 dB -10 to +60 °C > +10 °C SC UPC 0.3/0.05-55 dB -10 to +60 °C > +10 °C SC APC 0.5/0.05-65 dB -10 to +60 °C > +10 °C MTP APC 0.75/0.05-50 dB -10 to +60 °C > +10 °CInvisiLight MDU Solution - Building Hallways Product Overview • Four fiber count cords are available:• Four (4), eight (8) and twelve (12) color-coded optical fibers, within a 2 mm outer diameter (OD) sheath • Sixteen (16) color-coded optical fibers, within a 2.3 mm outer diameter (OD) sheath • EZ-Bend ® Optical Fiber, compliant with G.657.B3. Fully splice compatible with outstanding macrobending performance (1 turn at 1550 nm):• < 0.1 dB loss at 5 mm bend radius • < 0.2 dB loss at 2.5 mm bend radius • Capable of supporting a maximum of 40 outside corners with no limit on inside corners • Field termination required at the living unit (field-installable connector or pigtail splice)• Must be installed in riser-rated conduit in risers, in-between floors, through firewalls or when not adhered to a supporting surface Standards and Testing • Meets Telcordia GR-326 and GR-1435 standards • The Invisilight Multifiber cord is OFNG-FT4, OFNR-LS, and UL 1666 OFNR-LS • RoHS compliant; free from heavy metals and environmentally friendly; nonhazardous to human touch and creates negligible waste • Fully tested for compatibility with most wall and ceiling materials; easily painted with both latex and oil-based paints InvisiLight Adhesive • Opaque color during application; turns clear after approximately 1 hour • Set Time: 15 minutes Tack-Free Time: 45 minutes Full Cure Time: 24 hours depending on temperature, humidity, and thickness of adhesive • Long term storage is best at room temperature. Keep the adhesive tubes from freezing and below +38 ºC. Operating Temperature (Cured): -40 ºC to +60 ºC Installation Temperature:≥ +10 ºC 4 | Related Product The 12-Fiber SlimBox™ Modulewith internal adapters is anexcellent choice for terminatingor splicing the 12 fibers from theInvisiLight Multfiber Cord in a telecom or hallway closet.InvisiLight ® Optical Solutions InvisiLight MDU Solution - Building HallwaysThe InvisiLight MDU Solution kit includes: a spool of the InvisiLight Multifiber Cord with 12 EZ-Bend Optical Fibers, 12 Point-of-Entry (POE) modules, 20 outside corner bend limiters, 20 inside corner bend limiters, 12 wall plugs and caps, two (2) through-wall tools and installation instructions. The InvisiLight Multifiber Cord is available in lengths of 100 and 300 meters with custom lengths upon request. The adhesive (in tubes), adhesive application tool and pole extension tool are sold separately.InvisiLight ® Optical Solutions InvisiLight MDU Solution - Ordering GuideInvisiLight ®Optical Solutions | 5301140653NVSLGHTHI-D-UNCUNC-CMODUL KIT-16-100M EA Unconnectorized 16-fiber InvisiLight Multifiber Unit,100 meters, 16 compact point-of-entry (POE) modules and components 301140661NVSLGHTHI-D-UNCUNC-CMODUL KIT-16-300M EA Unconnectorized 16-fiber InvisiLight Multifiber Unit,300 meters, 16 compact point-of-entry (POE) modules and components 301140596NVSLGHTHI-D-SASUNC-CMODUL KIT-16-100M EA SC-APC connectorized (one end) 16-fiber InvisiLight Multifiber Unit,100 meters, 16 compact point-of-entry (POE) modules and components 301140604NVSLGHTHI-D-SASUNC-CMODUL KIT-16-300M EA SC-APC connectorized (one end) 16-fiber InvisiLight Multifiber Unit,301117149NVSLGHTHI-D-SCAUNC-Module Kit-12-100M-EA SC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit,100 meters, 12 point-of-entry (POE) modules and components 301139408NVSLGHTHI-D-SCAUNC-MODULE KIT-12-200M-EA SC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit,200 meters, 12 point-of-entry (Large POE) modules and components 301117156NVSLGHTHI-D-SCAUNC-Module Kit-12-300M-EA SC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit,300 meters, includes 12 point-of-entry (POE) modules and components 301117180NVSLGHTHI-D-MTFUNC-Module Kit-12-100M-EA MPO (Ribbon) connectorized (one end) 12-fiber InvisiLight Multifiber Unit, 100meters, includes 12 point-of-entry (POE) modules and components 301117198NVSLGHTHI-D-MTFUNC-Module Kit-12-300M-EA MPO (Ribbon) connectorized (one end) 12-fiber InvisiLight Multifiber Unit, 300meters, includes 12 point-of-entry (POE) modules and components 301117164NVSLGHTHI-D-LCAUNC-Module Kit-12-100M-EA LC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit,100 meters, includes 12 point-of-entry (POE) modules and components 301117172NVSLGHTHI-D-LCAUNC-Module Kit-12-300M-EA LC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit,300 meters, includes 12 point-of-entry (POE) modules and components 301117123NVSLGHTHI-D-UNCUNC-Module Kit-12-100M-EA Unconnectorized 12-fiber InvisiLight Multifiber Unit, 100 meters, includes 12 point-of-entry (POE) modules and components 301117131NVSLGHTHI-D-UNCUNC-Module Kit-12-300M-EA Unconnectorized 12-fiber InvisiLight Multifiber Unit, 300 meters, includes 12 point of entry (POE) modules and components 301127007NVSLGHTHI-D-SCAUNC-CMODUL KIT-12-100M-EA SC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit,100 meters, 12 compact point-of-entry (POE) modules and components 301126942NVSLGHTHI-D-SCAUNC-CMODUL KIT-12-200M-EA SC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit,200 meters, 12 compact point-of-entry (POE) modules and components 301133617NVSLGHTHI-D-SCAUNC-CMODUL KIT-12-300M-EA SC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit,301140638NVSLGHTHI-D-UNCUNC-CMODUL KIT-08-100M EA Unconnectorized 8-fiber InvisiLight Multifiber Unit,100 meters, 8 compact point-of-entry (POE) modules and components 301140646NVSLGHTHI-D-UNCUNC-CMODUL KIT-08-300M EA Unconnectorized 8-fiber InvisiLight Multifiber Unit,300 meters, 8 compact point-of-entry (POE) modules and components 301140570NVSLGHTHI-D-SASUNC-CMODUL KIT-08-100M EA SC-APC connectorized (one end) 8-fiber InvisiLight Multifiber Unit,100 meters, 8 compact point-of-entry (POE) modules and components 301140588NVSLGHTHI-D-SASUNC-CMODUL KIT-08-300M EA SC-APC connectorized (one end) 8-fiber InvisiLight Multifiber Unit,300 meters, 8 compact point-of-entry (POE) modules and componentsInvisiLight Multifiber Cord shipped on a spoolInvisiLight ® Optical SolutionsInvisiLight MDU Solution - Ordering Guide Continued6 | 301140612NVSLGHTHI-D-UNCUNC-CMODUL KIT-04-100M EA Unconnectorized 4-fiber InvisiLight Multifiber Unit,100 meters, 4 compact point-of-entry (POE) modules and components 301140620NVSLGHTHI-D-UNCUNC-CMODUL KIT-04-300M EA Unconnectorized 4-fiber InvisiLight Multifiber Unit,300 meters, 4 compact point-of-entry (POE) modules and components 301140562NVSLGHTHI-D-SASUNC-CMODUL KIT-04-100M EA SC-APC connectorized (one end) 4-fiber InvisiLight Multifiber Unit,100 meters, 4 compact point-of-entry (POE) modules and components 301140554NVSLGHTHI-D-SASUNC-CMODUL KIT-04-300M EA SC-APC connectorized (one end) 4-fiber InvisiLight Multifiber Unit,301107447NVSLGHTH-Module E/W LCA ADAPTER Additional point-of-entry (POE) module with LC-APC adapter 301107454NVSLGHTH-Module E/W SCA ADAPTER Additional point-of-entry (POE) module with SC-APC adapter 301107462NVSLGHTH-Module E/W SPLICE TRAY Additional point-of-entry (POE) module with splice tray 301123998NVSLGHTH-COMPACT-MODULE W/ LCA ADAPTER Additional compact point-of-entry (POE) module with LC-APC adapter 301117883WSC1W-012-SBM0-BGE-MTMUNC-F 12-fiber SlimBox module with MPO adapter 301117891WSC1W-012-SBM0-BGE-SCAUNC-F 12-fiber SlimBox module with SC-APC adapter 301117909WSC4W-012-SBM0-BGE-LCUUNC-F 12-fiber SlimBox module with LC-APC adapter 301085551WSC1W-012-SBM0-BGE-SCAUNC-F-PT 12-fiber SlimBox module with SC-APC adapter and pigtails 301117917WSC4W-012-SBM0-BGE-LCUUNC-F-PT 12-fiber SlimBox module with SC-APC adapter and pigtails 301120986NVSLGHTH-MID Span Tool 12-fiber multifiber cord access tool 301079109NVSLGHTC-MINI Dispensing Tool Adhesive dispensing tool 301079638NVSLGHTC-Tool Belt Kit InvisiLight tool belt kit 301115671NVSLGHTC-Pole Extension Tool InvisiLight pole extension tool 301083184NVSLGHTC-TUBE, 30ML ADHESIVE WH/GR-TIP EA 30mL adhesive tubeContact OFS Today!InvisiLight ® 80x80 Wall ModulePoint-of-Entry Module 12-FiberSlimBox ™ Module InvisiLight ® Optical Solutions | 7InvisiLight ® Optical Solutions for Home and Business 100X Faster Speeds for the Internet of All ThingsFor additional information please contact your sales representative.You can also visit our website at or call 1-888-fiberhelp (1-888-342-3743) USA or 1-770-798-5555 outside the USA.SlimBox is a trademark and InvisiLight and EZ-Bend are registered trademarks of OFS Fitel, LLC.OFS reserves the right to make changes to the prices and product(s) described in this document atany time without notice. This document is for informational purposes only and is not intended to modifyor supplement any OFS warranties or specifications relating to any of its products or services. Copyright © 2018 OFS Fitel, LLC.All rights reserved, printed in USA.OFS Marketing Communications Doc ID: FAP-263 Date: 0118A Furukawa Company。
博西家电AWE捷报频传 创新科技引领高端市场
博西家电AWE捷报频传创新科技引领高端市场作者:苏亮来源:《家用电器》2021年第04期创新产品惊艳亮相“家电奥斯卡”实至名归博西家电今年6款产品入选“艾普兰奖”,再度证明了其对于创新技术的多年深耕和对消费者需求的敏锐洞察。
在“艾普兰奖”颁奖典礼上,全新一代博世T8智能双净吸油烟机DWF9GCR70W成为全场瞩目的焦点,斩获“2021 AWE艾普兰金奖”。
基于深刻的市场洞察,这款产品采用创新低吸上拢技术,逼近油烟源头,有效改变油烟升腾路径,解决厨房的油烟难题。
同时,这款产品还配备了创新的灵感智控功能,搭载高精度红外温度传感器,精准感知油烟温度变化,动态匹配吸力强度,从而实现爆炒净排、炖煮静吸、智控瞬吸不跑烟的效果。
烹饪之后打开一键自清洁功能,高温融解内部油污,长保内外洁净。
此外,其质感星云灰色泽更彰显美感,尽显优雅高端品味,将助力更多追求品质与品位的摩登新中产打造现代厨房。
博世家电于AWE期间发布的博世维他焕颜冰箱KFN96PA56C同样基于市场需求的驱动,在本次评选中荣获“2021 AWE艾普兰创新奖”。
博西家电精准把握中国市场及当代女性对“健康之美”的追求,博世维他焕颜冰箱KFN96PA56C具有差异化定位,特设专业护肤品储存空间,10-12°C 恒温存储空间可确保护肤品保持良好状态,为用户的高档护肤品提供最佳存储条件,确保最佳使用功效;同时更有零度维他保鲜mega技术、双擎冷及IZA清新净风系统的支持,零度维他保鲜室内可实现±0.1°C 精准控温,在冷藏过程中留存食物的更多营养,在解冻过程中保证食材口感。
此外,这款产品还采用镜钻黑面板设计,完美匹配多种家居风格之余亦能彰显高端品味。
荣获“2021 AWE艾普兰优秀产品奖”的博世10kg进口活氧洗烘套装WGA656B00W+WQA655A00W则为消费者提供了一站式衣物除菌解决方案,助力消费者畅享健康洁净的洗烘环境,乐享健康生活。
JDSU T-BERD 6000 光纤测试平台说明书
T-BERD ®6000Compact Optical Test Platform Key Features •Compact,lightweight,and highly integrated platform•More than 40 application modules already supported formultimode and single-mode•Built-in VFL,power meter,LTS,ORL,and video inspectionscope options •Choose from IL/ORL,OTDR,PMD,CD,AP and/or WDMplug-ins•Exceeds Telcordia specifications for ruggedness,droptesting,and extended battery life•Compatible with plug-in modules from the MTS-51001and T-BERD 8000The JDSU T-BERD 6000 is a highly integrated test platform designed for all phases of the fiber network life cycle.It provides field service technicians with the highest levels of performance and upgradeability on the market today.The modular design of the T-BERD 6000 offers an extensive portfolio of test functionality with over 40 different fiber modules supporting a wide range of applications.The versatility of the T-BERD 6000 allows technicians to standardize using one type of test equipment and then introduce new testing capabilities in the field without incurring additional training or device costs.The T-BERD 6000 is compatible with our existing fiber module product line,so technicians can exchange plug-in modules between the T-BERD-8000 Scalable Optical Test Platform and the T-BERD 6000,in the field and without the need for additional tools.To ensure the highest level of return on your capital investment for test equipment,an extension allows you to upgrade existing OTDR modules from the MTS-5100 for use with the T-BERD 6000.To ensure the highest-level return on investment for your test equipment,upgradeexisting optical time domain reflectometer (OTDR) modules from the MTS-5100(with an extension) for use with the T-BERD 6000.Compatible with the M T S-5100 line of MM,SR,DR,HD,and VHD OTDR modulesApplications•Performs multimode andsingle-mode OTDR and optical losstest (bidirectional)•Conducts connector inspection andcontinuity testing•Finds faults and identifies traffic•Tests FTTx/PON and CWDMnetworks•Performs fiber dispersion testing(PMD/CD/AP) for 10G/10GE/40G•Allows for use of talk set/data portfor automated end-to-endcommunication and unit control•Generates proof-of-performancereports P r o vided b vided by y : com (800)40404-A -ATE TEC CAd Advanced vanced T Test est E quipment Rentals ®Microphone(4) Molded Bumpers(7) Soft Keys(Context Sensitive)(5) Direct Access Keysand Start/StopNavigation Key PadRemovable High-CapacityLi Ion Battery (8-hour battery life)T-BERD 6000 Front Panel Ideal for Field TestingThe T-BERD 6000 is a highly integrated platform with a single module slot and the option to extend internal memory up to 1 gigabyte.The platform features an intuitive graphical user interface (GUI) shown on a large 8.4 inch transreflective color display (with an optional touchscreen) to improve viewing under any condition.The high capacity Lithium ion battery adds extended life.Other features include an optional video inspection scope (via USB port),and optional built-in optical test functions,such as a visual fault locator (VFL),power meter,optical return loss (ORL) and loss test sets (LTS).The T-BERD 6000 also has a built-in optical talk set option for communicating and controlling remote units along the fiber,and it can transfer data fast using the USB or Ethernet port.8.4 in Indoor/Outdoor TFT Color Display,Touchscreen ConfigurablePower Meter Visual Fault Locator AC InputHeadsetOptical Talk Set/Light Source/ORL High-SpeedEthernet Port (2) USB Ports (Video Inspection Scope Option)T-BERD 6000 Top SideOverview of Fiber Optic Applications Compact and Highly IntegratedThe versatility of the T-BERD 6000 allows it to address premises to long-haul network s comprising new technologies,such as various fiber network s (FTTx),remote optical add/drop multiplexers (ROADMs),and 40 G.–Built-in VFL,laser source power meter,LTS,talk set/data,and video inspection scope options (simultaneously)–Bidirectional insertion loss (IL) and ORL capabilities combined in one module –OTDR and chromatic dispersion (CD) capabilities combined in one module –Polarization mode dispersion (PMD),wave division multiplexing (WDM),and attenuation profile (AP) capabilities combined in one module –PMD,CD,and AP capabilities combined in one module Wide Range of Test Applications–10 GigE local area network (LAN) qualification Solution:T-BERD 6000 with the unique universal SRL 850/1300/1310/1550/1625 nmOTDR Module–End-to-end connectivity on point-to-point network s,including sectionalized testing on a passive optical network (PON) (without a splitter)Solution:T-BERD 6000 with the VSRe,SRe,MR OTDR module at 1310/1550 nm –End-to-end connectivity on PONs,including splitter qualification Solution:T-BERD 6000 with the MR,LR,or VLR at 1310/1490/1550 nm OTDR moduleAdd optional VFL,power meter,and video inspection scope–In-service maintenance and troubleshooting without service disruption Solution:T-BERD 6000 with the filtered LR OTDR module at 1625 nm –End-to-end connectivity and fiber splice qualificationSolution:T-BERD 6000 with the MR,LR,or VLR at 1310/1550/1625 nm OTDR module Add optional VFL,power meter,and video inspection scope LAN/WAN Premises Metro/Core NetworksFTTx/Access Networks4–End-to-end connectivity and fiber splice qualification Solution:T-BERD 6000 with the UHD OTDR module at 1310/1550/1625 nmDynamic range of 50 dB available at 1550 nm–Characterize fiber in high-speed transmission systems for loss/dispersion Solution:T-BERD 6000 with the PMD/CD/AP ,ODTR,and OFI module–Characterize fiber and prove suitability to carry multiple channels (water peak)Solution:T-BERD 6000 with the VLR OTDR module at 1383 nmAdd the combined PMD/WDM/SA or CDWM OTDR module–New technologies developed in the futureSolution:T-BERD 6000 with the new JDSU field-upgradeable application module 10G/40G Fiber Characterization CWDM/DWDM Modular PlatformUltralong-Haul Networks Modular designOTDR and IL/ORL TestingA Wide Range of OTDR ModulesThe JDSU OTDR plug-in module family provides a wide range of high-performance OTDRs.Over 40 field-interchangeable modules are compatible withthe T-BERD 6000 for testing and troubleshooting any multimode or single-mode network.The OTDR family includes six lines of OTDRs featuring:–New wavelengths to cover 1383 nm (CWDM) and 1490 nm (FTTx) –Highest dynamic range up to 50 dB–Shortest dead zones down to 0.5 m in multimode and 0.8 m in singlemode–Fastest scan speed at 0.1 s in real-time modeFrom Simple Fault Locator to Expert OTDR…The fault locator boosts productivity in the field by providing:The expert mode offers high-level trace analysis possibilities,mak ing yourT-BERD 6000 platform a powerful instrument for commissioning and trouble-shooting by offering:-Manual settings (pulse,acquisition time,resolution,distance range)-Manual addition and deletion of events-Manual slopes,splices,and reflectances measurementIndustry leader for dynamicrange with 50 dB Revolutionary 50 cm dead zone automationloss,and ORL measurementsFigure 2 Fault locator modeIdeal for End-to-End CommissioningOTDR bidirectional testing is required to obtain true and accurate splice loss readings.JDSU has developed an innovative automatic bidirectional analysis function that is integrated directly into the T-BERD 6000 platform,saving at least 50 percent of the time required for traditional bidirectional analysis.–Offers communication between two units via the link under test to set up the same optimized acquisition parameters–Displays and saves automatic acquisitions in both directions on both units –Eliminates operator errorUnique to the market:Fully automatic bidirectionalacquisition and analysisLocalT-BERD 6000T-BERD 6000Remote Figure 3Bidirectional OTDR measurement CWDM OTDR ModulesThe CWDM OTDR module allows in-service OTDR measurements at International Telecommunications Union (ITU-T) G.694.2 CWDM wavelengths.This solution was developed to help network operators and dark fiber providers characterize,maintain,and troubleshoot CWDM systems from short- to medium-haul fiber networks.Figure 4 Qualification of a CWDM networkFTTx/PON In-Service ModulesTo avoid interrupting customer traffic (in-service testing) of B/G/E-PON networks the filtered OTDR module performs an out-of-band test using 1625 nm wavelength.Insertion Loss and Optical Return Loss Testing–Measures bidirectional IL,ORL,and fiber length –Offers one-button automated testing –Choose three wavelengths from 1310,1490,1550,and 1625 nm –Compatible with the OFI-2000 Multifunction Loss Test SetCD,PMD,AP,and WDM TestingThe T-BERD 6000 enables CD and PMD measurements to identify fiber viability for very high-speed transmission systems.It also enables WDM and AP tests to validate the link compatibility with DWDM system implementation.Polarization Mode Dispersion Testing–Fast and accurately measures PMD delay,PMD coefficient,andsecond-order values–Offers high dynamic range (up to 65 dB) dedicated for metropolitan,long haul, and very long haul fiber optic links–Offers shock- and vibration-proof design (with no moving parts)–Allows for measurement through multiple amplifiers–Provides statistics and long-term monitoringChromatic Dispersion Testing - OTDR-Based Method–Requires access to only one end of the fiber–Offers dynamic range (up to 120 km) dedicated for any metropolitan fiber optic links–Includes acquisition points around 1310,1480,1550,and 1625 nm for accurate CD from 1260 to 1650 nm–Integrates a four-wavelength OTDR and light source–Provides sectional analysis capability for troubleshooting–Offers shock- and vibration-proof design (with no moving parts)9T-BERD 6000 COMPACT OPTICAL TEST PLATFORMChromatic Dispersion Testing - Phase-Shift Method–Offers high dynamic range (up to 55 dB) dedicated for metropolitan,long haul, and very long haul fiber optic links–Provides full wavelength range characterization (1260 to 1640 nm)–Allows for measurement through multiple amplifiers–Offers shock- and vibration-proof design (with no moving parts)Attenuation Profile Testing–Provides total loss and dB/km values for full band testing (1260 to 1640 nm)–Allows CDWM and dense wavelength division multiplexing (DWDM) transmission band characterization–Provides water peak (1383 nm area) characterization–Offers shock- and vibration-proof design (with no moving parts)–Combined with WDM and PMD functions or with CD and PMD functionsDWDM Maintenance Testing–Measures channel level,power,and wavelength in the S,C,and L bands–Provides the most compact DWDM test solution that measures optical signal-to-noise ratio (OSNR)–Tests wavelengths from 1260 to 1640 nm or 1485 to 1640 nm–Offers high wavelength accuracy–Provides statistics and long-term monitoring–Offers shock- and vibration-proof design (with no moving parts)10Generate cable acceptance reportsReport single test resultsP rofessional acceptance test reports OTDR trace report Options and AccessoriesGreater Productivity with CommunicationsWith limited telephone line and cell phone coverage during fiber testing,the T-BERD 6000 offers a built-in optical talk set option for permanent communication between test technicians.Near- and far-end technicians can communicate with each other,avoiding many of the testing mistakes that can prove costly if another truck roll is required to fix a problem.For bidirectional testing that requires both the near- and far-end units to acquire data,the Data mode on the optional talk set synchronizes data acquisition for both units during OTDR testing and retrieves test results for pass/fail analysis.–Provides 45 dB optical talk set–Provides file transfer capability through the fiber–Provides remote control of the far-end unit–Provides a talk set compatible with the OFI-2000 and with the OTS-55 Optical Talk Set stand-alone unitEffective Test Report GenerationTransfer data and generate comprehensive reports using JDSU FiberTrace and FiberCable analysis software.–Generate proof-of-performance reports with a high degree of customization –Create dedicated tables for each test result (OTDR,CD,PMD,and ORL)–Provides pass/fail indicators for quick analysis of problem areas –Identifies macro bends and provides fault report summary11Comprehensive Line of AccessoriesA wide range of available accessories provide technicians with everything needed to benefit from the complete testing capabilities of the of the T-BERD 6000.Join the T-BERD Family of Optical Test SolutionsBased on the same graphical user interface (GUI) and file formats,the T-BERD 6000,T-BERD 6000A,and the T-BERD 8000 form a family of solutions for high-performance field testing.In addition,the fiber application plug-in modules are field interchangeable with the T-BERD 6000,T-BERD 6000A,and the T-BERD 8000,ensuring maximum flexibility and investment protection.The T-BERD 6000 can house one fiber application plug-in module.The T-BERD 6000A with the Multi-Services Application Module (MSAM) offers Ethernet and SONET/SDH testing at line rates from 10 Mb/s up to 10 Gb/s,as well as the ability to verify and troubleshoot higher-layer IP video,Layer 4 UDP/PCP ,FTP ,and HTTP .The T-BERD 8000 can house multiple modules simultaneously,enabling the perform-ance of almost any combination of network test functions in a single unit.In addition,the T-BERD 8000 also offers:–DWDM turn-up testing–Dual-port optical spectrum analysis–DWDM channel isolation for BERT analysis –E1/T1 to 10G BERT analysis–10/100/1000/1G/10G Ethernet testingT-BERD 6000 LITE Compact OTDR T-BERD 6000Compact Optical Test Platform T-BERD 6000ACompact Network Test Platform T-BERD 8000Scalable Optical Test PlatformThe T-BERD 6000 with the optional mouse,keyboard,battery,headset,AC/DC adapter charger,and video inspection scopeT-BERD 8000 field-scalable optical test platformView clean and dirty fiber end faces with the connector inspection option.Test & Measurement Regional SalesProduct specifications and descriptions in this document subject to change without notice.© 2008 JDS Uniphase Corporation November 200830162566 000 1108 TB6000.DS.FOP .TM.AESpecifications for Typical 25°CDisplayTFT color,8.4 in LCD,800 x 600,high-visibility (standard)Touchscreen,TFT color,8.4 in LCD,800 x 600,high-visibility (optional)Storage and I/O Interfaces Internal memory 1000 test results Extended memory (optional)Minimum 1 GB (optional)2x USB V1.1,1x RJ45 Ethernet Power Supply Battery type Standard removable Li-ion batteries AC/DC adapter Input 100–240 V,50–60 Hz,Output 19 V DC/3.1 AOperation time Up to 11 hrs with standard display,Telcordia GR-196-CORESize and WeightMainframe with one plug-in module and battery (L x H x W)285 x 195 x 93 mm(11.2 x 7.7 x 3.7 in)Mainframe only (without battery and module) 2.4 kg (5.3 lb)Mainframe (with one plug-in module and battery) 3.4 kg (7.5 lb)Environmental SpecificationsOperating temperature range on mains (no options)–20 to +50°C (–4 to 122°F)Operating temperature range (all options)0 to +40°C(32 to 104°F)Storage temperature range –20 to +60°C (–4 to 140°F)Humidity,non-condensing 95%Base Unit Optical Interfaces (optional)Power Meter Power level+10 to –60 dBm Calibrated wavelengths 850,1310,and 1550 nm Connector type Universal push/pull (UPP)Talkset Wavelength 1550 nm ±20 nmDynamic range 45 dBFunction With data/file transferLaser safety Class 1M laser Connector typeField interchangeableOptical Return Loss Selectable wavelength 1310 / 1550 nm Measurement range 0 dB to 45 dBMeasurement uncertainty ±1 dB Display resolution0.01 dBVisual Fault Locator Wavelength 635 nm ±15 nm Output power level <1 mW Laser safety Class 2 laser Connector type Universal push/pull (UPP)Continuous Wave Light Source Wavelengths (selection)1310,1550,and 1625 nm Output power level –3.5 dBm Stability in 15 min ±0.02 dB Stability in 8 hrs ±0.2 dB Laser safety Class 1M laser Connector type Field interchangeable Video Inspection Scope (via USB)Magnification 250X and 400X,through the USB portBase InstrumentT-BERD 6000 platform with high-visibilitycolor display and battery packTB6000T-BERD 6000 platform with high-visibility touchscreen color display and battery pack TB6000T Extended memory (1 GB)E60EXTMEM VFL with 2.5 mm UPP E80VFL Optical talk set E80TS Optical power meter with UPP connector (2.5 mm provided as standard)E80PM Optical loss test set 1550/1625 nm with talk set E8029LTSTS Optical loss test set with talk set (1310/1550/1625 nm)E8036LTSTS Combined LTS and ORL with talk set(1310/1550 nm )E8026LTSTSORL Bidirectional OTDR acquisitionoption for single-mode moduleE80bidir Quick capture video microscope,200x/400x with USB converterEFSCOPE400AccessoriesCigarette lighter power adapterE80lighter Additional Li-Ion rechargeable batteryE60LiIon Wrap around carrying case for 6000 platformESCASE5Application SoftwareOptical FiberTrace software (for post-analysis)EOFS100Optical FiberCable software(for acceptance report generation)EOFS200Optical connectors for the loss test set and talk set options (connector must be of the same type)Field replaceable connectors:EUNIPCFC,EUNIPCSC,EUNIPCST,EUNIPCDIN,EUNIPCLC,EUNIAPCFC,EUNIAPCSC,EUNIAPCST,EUNIAPCDIN,EUNIAPCLCPlease refer to the separate module datasheets for detailed specifications.。
VAHLE CPS 无接触无线电源5A 20kHz系列产品介绍(英文)说明书
YOUR VISION – OUR SOLUTION5A | EN | Rev.032CPS® – KEY HIGHLIGHTS3 GENERAL CPS® OPERATING PRINCIPLETRANSFORMER PRINCIPLEVAHLE CPS® technology provides electrical energy without any mechan-ical contact. It utilizes the induction principle similar to a transformer‘s primary/secondary transfer. In a transformer, the primary and second-ary windings are on a common, closed ferromagnetic core. CPS® tech-nology, on the other hand, …stretches“ the primary winding to a long loop and places the secondary winding onto an open ferromagnetic core. This allows relative motion of the two windings. The transmission character-istics are optimized by using a high transmission frequency of 20 kHz.CPS®TECHNOLOGY4CPS ® – SYSTEM OVERVIEW1 PPU Primary Unit2 Track Power Litz Cable3 Guidance4 F-PU: Flat PickupPRIMARY EQUIPMENT – OVERVIEWCOMPLETE CABINET 45 KW / 11 KW• Cabinet ready for use• Technical design depending on installed system • Design according to customer specifications• Several cabinets can be interconnected for large systems with a high power requirementsMOUNTING PLATE 45 KW / 11 KW• All 20 kHz CPS ® components are pre-mounted and completely wired • Installation in an existing power switch cabinet • Supply with 400 V, three-phase alternating current • 20 kHz output for supplying the primary loopCABINET PRIMARY INVERTERAs the centerpiece of the contactless power supply, the primary inverter delivers the required electrical power for all mobile consumers located on the track. Standard three-phase alternating current of 400 V / 50 Hz (or different regional standards) is initially converted to single-phase alternating current of 20 kHz and then fed to the primary cable at a constant current of 70 A. A suitable diagnostics interface is available for displaying or moni-toring the actual operating condition.42135PRIMARY POWER UNITPPU45K – 45 KWTECHNICAL DATAELECTRICAL DATAPower (nominal/peak) ...........8.8 kW / 11 kW (PPU11K)Power (nominal/peak) ...........36 kW / 45 kW (PPU45K)Supply voltage ........................3 x 400 VACMECHANICAL DATADimension............................... 2000 x 1200 x 500 mm + 200 m socket(complete cabinet)1900 x 700 mm (mounting plate)Temperature range ................0 – 30°CProtection Type ....................... I P54 (complete cabinet)IP00 (mounting plate)Mounting plateComplete cabinet PL8x4PPU45k.2-020-072-A-IO Primary power unit 45 kW / Feed-through terminal for standard application / 20 kHz / 72 A / Stand alone / Digital IOs / Track compensation not included 10022801PPU45k.2-020-072-M-IO Primary power unit 45 kW / Feed-through terminal for standard application / 20 kHz / 72 A / Sync-Master / Digital IOs / Track compensation not included 10022821PPU45k.2-020-072-U-IO Primary power unit 45 kW / Feed-through terminal for standard application / 20 kHz / 72 A / Sync-Sub-Slave / Digital IOs / Track compensation not included 10022807PPU45k.2-020-072-S-IOPrimary power unit 45 kW / Feed-through terminal for standard application / 20 kHz / 72 A / Sync-Slave / Digital IOs / Track compensation not included10022808RANGE OF PRODUCTSDescriptionOrder No.P-SK-0220NF-0400-015-028-300-000-0-000+VTuning-Compensation for PPU15..28X220NF 0915125-9 P-SK-0150NF-0600-015-028-300-000-0-000+VTuning-Compensation for PPU15..28X150NF 0915125-8 P-SK-0100NF-0600-015-028-300-000-0-000+VTuning-Compensation for PPU15..28X100NF 0915125-7 P-SK-0068NF-0650-015-028-300-000-0-000+VTuning-Compensation for PPU15..28X68NF 0915125-6 P-SK-0047NF-0650-015-028-300-000-0-000+VTuning-Compensation for PPU15...28X47NF0915125-5TRACK COMPENSATION (MOUNTING PLATE)RANGE OF PRODUCTSDescription Order No.124 AHF50PPU11k.1-020-124-A-IO Primary power unit 11 kW / Terminal screw for standard application / 20 kHz / 124 A / Stand alone / Digital IOs / Track compensation not included10022809PPU11k.1-020-124-M-IO Primary power unit 11 kW / Terminal screw for standard application / 20 kHz / 124 A / Sync-Master / Digital IOs / Track compensation not included10022810PPU11k.1-020-124-U-IO Primary power unit 11 kW / Terminal screw for standard application / 20 kHz / 124 A / Sync-Sub-Slave / Digital IOs / Track compensation not included 10022811PPU11k.1-020-124-S-IOPrimary power unit 11 kW / Terminal screw for standard application / 20 kHz / 124 A / Sync-Slave / Digital IOs / Track compensation not included1002281272 AHF25PPU11k.1-020-072-A-IO Primary power unit 11 kW / Terminal screw for standard application / 20 kHz / 72 A / Stand alone / Digital IOs / Track compensation not included10022813PPU11k.1-020-072-M-IO Primary power unit 11 kW / Terminal screw for standard application / 20 kHz / 72 A / Sync-Master / Digital IOs / Track compensation not included100228147 PRIMARY EQUIPMENT CONFIGURATIONThe primary inverter units shown here are generally suitable for all areas of application indicated in this catalog. From a technical and economical aspect, an optimum adaptation to the respective conditions of a specific installation is assured due to an available, wide-ranging performance grading scale. Whether a complete cabinet is needed or a mounting plate – our experienced project team will always be glad to help you selecting the best suitable components.Primary equipment can be configured for installations with one segment (stand alone) or for installations with several segments.A system with two segments consists of a master unit and a slave unit. A system with more than two segments consists of a master unit, sub-slave units and a slave unit.Examples: S ystem with two segments: 1 x master and 1 x slave.System with four segments: 1 x master, 2 x sub-slave and 1 x slaveCONFIGURATION FOR 124 ACONFIGURATION FOR 72 ASystem with one segment System with several segmentsStand alone Stand alone PU22Master Sub-Slave SlavePrimary cable HF50PPU45k.1-020-124-A-IO PPU45k.3-020-124-A-IO PPU45k.1-020-124-M-IO PPU45k.1-020-124-U-IO PPU45k.1-020-124-S-IO PPU11k.1-020-124-A-IO PPU11k.1-020-124-M-IO PPU11k.1-020-124-U-IO PPU11k.1-020-124-S-IOF-Pickup E-Pickup F-Pickup F-Pickup F-PickupU-Pickup U-Pickup U-Pickup U-PickupPrimary cable PL8x4PPU45k.2-020-072-A-IO PPU45k.2-020-072-M-IO PPU45k.2-020-072-U-IO PPU45k.2-020-072-S-IOPPU11k.2-020-072-A-IO PPU11k.2-020-072-M-IO PPU11k.2-020-072-U-IO PPU11k.2-020-072-S-IO F-Pickup system F-Pickup system F-Pickup system F-Pickup system8TRACK EQUIPMENTTrack Power Compensation BoxTRACK COMPENSATION KB 10.1Dimensions (L x W x H) ............194 x 154 x 100Protection Type .......................IP65Weight .....................................1.5 kg Track current ..........................72 ATRACK COMPENSATION KB 10.4Dimensions (L x W x H) ............2x 440 x 156 x 110Protection Type .......................IP54Weight .....................................4 kg Track current ..........................124 ATRACK COMPENSATION• Compact design• Positioning near track possible • A box is required every 33 to 44 mPRIMARY CABLEPRIMARY CABLE HF 25Application ..............................EMS Diameter .................................11 mm Weight .....................................0.28 kg/m• For EMS and sortation technology applications• Special conductor made of single insulated copper braid • Small outside diameterPRIMARY CABLE HF 50Application ................ F loor skid conveyor/crane installationsDiameter .................................16.5 mm Weight .....................................0.56 kg/m• For very long track sections • Special conductor made of single insulated copper braid• Very low power loss due to large conductor cross sectionPRIMARY CABLE 8 X 4Application ................Floor skid conveyor Diameter .................................15.7 mm Weight .....................................0.49 kg/m• For standard applications • Single insulated copper conductors • Easy installation with standard cable tools10VEHICLE EQUIPMENT FOR 24 V / 27 VF-PICKUP PS08 WITH INTEGRATED REGULATORDescriptionOrder No.PS08-0027V019AD-00000000-1C103-00310+VPS08 / 0.5 kW / 20 kHz / Track conductor spacing 80 mm / integrated Regulator / 27 VDC / 19 A max / Battery Charging 0915429-3E21PS08-0600W024VD-00000000-1C102-00300+V PS08 / 0.6 kW / 20 kHz / Track conductor spacing 80 mm /integrated Regulator / 24 VDC / 25 A max0915429-1A11AL-5X2,5Cable connection between PS08 and external applicationsee page 22RANGE OF PRODUCTSBLOCK DIAGRAMDC-OUTPUTDIMENSIONS TECHNICAL DATAELECTRICAL DATAPeak power .............................0.6 / 0.5 kWNominal power .......................0.35 kWOutput voltage ........................24 / 27 VDC ±5 %Output current max ................25 / 19 ADuty cycle ................................depending on coolingTrack current ..........................72 ATrack frequency ......................20 kHzTrack conductor spacing ........80 mmPROTECTIONOutput over current ................YesMax. reverse voltage ..............30 VDCPICKUP SYSTEM MECHANICAL DATA Dimension...............................310 x 210 x 133 mmMounting holes.......................120 x 290 mm / 160 x 190 mm Weight .....................................12.8 kgNominal airgap .......................20 mmVertical tolerances .................−20 mm @ 100%, +10 mm derating Lateral tolerances ..................±15 mm @ 100%, ±30 mm derating Protection rating .....................I P20 with open plug connectionIP54 with plug connected Ambient temperature .............0 ... +30°C non-condensing Environment ...........................General industrialCooling ....................................Natural convectionVEHICLE EQUIPMENT FOR 24 V / 28.2 V / 56.2 VF-PICKUP PS27.1 WITH INTEGRATED REGULATORRANGE OF PRODUCTSBLOCK DIAGRAMDC-OUTPUTDescriptionOrder No.PS27.1-1000W024VD-00000000-1A002-0030L+VPS27.1 / 1 kW / 20 kHz / Track conductor spacing 100 mm / integrated Regulator / 24 VDC / 42 A max10011549PS27.1-28.2V036AD-00000000-1B002-0031L+VPS27.1 / 1 kW / 20 kHz / Track conductor spacing 100 mm / integrated Regulator / 28.2 VDC / 36 A max. / Battery Charging 10014177PS27.1-56.2V020AD-00000000-1B002-0031L+V PS27.1 / 1 kW / 20 kHz / Track conductor spacing 100 mm / integrated Regulator / 56.2 VDC / 20 A / Battery Charging 10014214AL-7G2,5Cable connection between PS27.1 and external applicationsee page 22DIMENSIONS TECHNICAL DATAELECTRICAL DATAPeak power .............................1 kW (10 s)Nominal power .......................0.6 kWOutput voltage ........................24 / 28.2 / 56.2 VDC ±10 %Output current max ................46.5 / 40 / 20 ADuty cycle ................................40 % Duty (10 min cycle)Track current ..........................72 ATrack frequency ......................20 kHzTrack conductor spacing ........100 mmPROTECTIONOutput over current ................YesMax. reverse voltage ..............30 VDCPICKUP SYSTEM MECHANICAL DATA Dimension...............................405 x 245 x 142 mmMounting holes.......................225 x 280 mmWeight .....................................16 kgNominal airgap .......................15 mmVertical tolerances .................−15 mm @ 100%, +20 mm derating Lateral tolerances ..................±30 mm deratingProtection rating .....................I P20 with open plug connectionIP54 with plug connected Ambient temperature .............0 ... +30°C non-condensing Environment ...........................General industrialCooling ....................................Natural convectionVEHICLE EQUIPMENT FOR 560 VF-PICKUP F330 AND REGULATOR RE330RANGE OF PRODUCTSBLOCK DIAGRAMDC-OUTPUTREADYDescriptionOrder No.vPOW_F330.1-020-124-04-L0-HV F330 / 3.3 kW / 20 kHz / 124 A / Duty 40 % / Linear 10017749vPOW_RE330.1-020-560-04-NI-ST-RC-NI Regulator / 3.3 kW / 20 kHz / 560 V / Duty 40 % /No thermal monitoring / LITE / Relay contact / No Auxiliary 10017419PX12Cable connection between F330 and RE330see page 22DIMENSIONSTECHNICAL DATAELECTRICAL DATAPeak power .............................3.3 kW Nominal power .......................1.3 kW Output voltage ........................560 VDC ±5 %Output current max ................6.5 ADuty cycle ................................40 % duty (10 min cycle)Track current ..........................124 A Track frequency ......................20 kHz Track conductor spacing ........100 mm PROTECTIONOutput over voltage ................Yes Output over current ................Yes Max. reverse voltage ..............750 VDCREGULATOR MECHANICAL DATADimension...............................190 x 120 x 87.4 mm Mounting holes.......................180.5 x 80 mm Weight .....................................1 kg Protection rating .....................IP20Ambient temperature .............0 ... +40°C non-condensing Environment ...........................General industrial Cooling ....................................Forced convectionPICKUP CONNECTION CABLELength .....................................1/2/4/6 m Outer diameter .......................11 mm Connections ............................Pre-terminated Application ..............................Flexible Min. bending radius ...............50 mmVEHICLE EQUIPMENT FOR 48 VU-PICKUP PK31 AND REGULATOR RE080DescriptionOrder No.PK31 -0900W110VA-VLPK1000-19I00-8000K+VPK31 / 900 W / 20 kHz / Nominal power 400 W / 1 m connecting cable 10020600RE080.1-20-048-03-UC-LI-NI-NI Regulator / 0.8 kW / 20 kHz / Duty 30 % / 48 V / Thermal monitoring / LITE / Relay contact / No Auxiliary10021229AL-3G4Cable connection between RE080 and external applicationsee page 22RANGE OF PRODUCTSBLOCK DIAGRAMDC-OUTPUT 1DC-OUTPUT 2USBDIMENSIONS TECHNICAL DATAELECTRICAL DATAPeak power .............................0.8 kW (5 s)Nominal power .......................0.26 kWOutput voltage ........................48 VDC ±5 %Output current max ................18 ADuty cycle ................................30 % (10 min cycle)Track current ..........................72 ATrack frequency ......................20 kHzTrack conductor spacing ........67 mmPROTECTIONOutput over voltage ................YesOutput over current ................YesOver temperature ...................YesREGULATOR MECHANICAL DATA Dimension...............................304 x 220 x 94.5 mm Mounting holes.......................204 x 175 mmWeight .....................................3.7 kgProtection rating .....................I P20 with open plug connectionIP54 with plug connected Ambient temperature .............5 ... +40°C non-condensing Environment ...........................General industrialCooling ....................................Natural convectionPICKUP CONNECTION CABLELength .....................................1 mOuter diameter .......................11.2 mmConnections ............................Pre-terminatedApplication ..............................FlexibleMin. bending radius ...............40 mmPICKUP MECHANICAL DATA Dimension...............................114 x 75 x 89.4 mm Mounting holes.......................86 x 47 mmWeight .....................................1.6 kgNominal airgap .......................12.5 mmVertical tolerances .................±3 mmLateral tolerances ..................+4 / −12.5mm @ 100%VEHICLE EQUIPMENT FOR 560 VE-PICKUP PUE4 AND REGULATOR RE55RANGE OF PRODUCTSBLOCK DIAGRAMDC-OUTPUTTEMPERATURE WARNINGDescriptionOrder No.PUE4-4000W270VA-00000000-12E00-00E00+VPUE4 / 4 kW / 20 kHz / Nominal power 3.2 kW / 200 mm connecting cable 10005185RE55.1-5500W560VD-000W00VD-11014-0030X+V RE55.1 / 5.5 kW / 20 kHz / 560 VDC 10016225VL-7G2,5Cable connections between PUE4 and RE55see page 22DIMENSIONS TECHNICAL DATAELECTRICAL DATAPeak power .............................4 kW (5 s)Nominal power .......................1.3 kWOutput voltage ........................560 VDC ±10 %Output current max ................8 ADuty cycle ................................30 % (10 min cycle)Track current ..........................72 ATrack frequency ......................20 kHzTrack conductor spacing ........84 mmPROTECTIONOutput over current ................YesMax. reverse voltage ..............800 VDCREGULATOR MECHANICAL DATA Dimension...............................282 x 247 x 169 mm Mounting holes.......................215 x 214 mmWeight .....................................7.2 kgProtection rating .....................I P20 with open plug connectionIP54 with plug connected Ambient temperature .............5 ... +40°C non-condensing Environment ...........................General industrialCooling ....................................Natural convectionPICKUP CONNECTION CABLELength .....................................0.2/1/2/3/4.5 mVEHICLE EQUIPMENT FOR 288 V / 560 VE-PICKUP PU22 AND REGULATOR RE22RANGE OF PRODUCTSBLOCK DIAGRAMDC-OUTPUT 1DC-OUTPUT 2DescriptionOrder No.PU22-022KW310VA-00000000-00000-00C00+VPU22 / 22 kW / 20 kHz / Mounting on narrow side 0915007-120PU22-022KW310VA-00000000-00000-00D00+VPU22 / 22 kW / 20 kHz / Mounting on long side0915007-220RE22-040KW288VD-1K6W24VD-25A11-13400+VRE22 / 40 kW / 20 kHz / 2 x PU22 / 288 VDC / Auxilliary / 1.6 kW / 24 VDC 0915011-0218RE22-040KW560VD-960W24VD-25A00-00400+V RE22 / 40 kW / 20 kHz / 2 x PU22 / 560 VDC / Auxilliary / 0.19 kW / 24 VDC 0915011-0200AL-5G16Cable connections between PU22 and RE22see page 2221DIMENSIONSTECHNICAL DATAELECTRICAL DATAPeak power .............................22 / 40 kW * (10 s)Nominal power .......................10 / 25 kW *Output voltage ........................288 / 560 VDC ±10 %Output current max ................155 / 80 A Track current ..........................124 A Track frequency ......................20 kHz Track conductor spacing ........133 mmPROTECTIONOutput over voltage ................Yes Output over current ................YesREGULATOR ELECTRONIC MECHANICAL DATADimension...............................328 x 660 x 290 mm Mounting holes.......................200 x 630 mm Weight .....................................31.5 kg Protection rating .....................IP20Ambient temperature .............0 ... +30°C non-condensing Environment ...........................General industrial Cooling ....................................Forced convectionVariant PU22 xxx-120Power CablesPAUL VAHLE GmbH & Co. KGWesticker Str. 5259174 Kamen Germany Phone: +49 2307 704-0*************VAHLE Incorporated 407 Cane Island Pkwy Katy, TX, 77494, USA Phone: +1 713-465-9796 ******************connect with us! @vahleincW 1103931/00/e n | 0 | R e v .03 | 03/20 | E r r o r s a n d t e c h n i c a l m o d i f i c a t i o n s s u b j e c t t o c h a n g e .。
Xitanium LITE Prog LED Xtreme驱动器数据手册说明书
Xitanium LITE Prog LED Xtreme driversXi LP 150W 0.2-0.7A SL 230V S240 sXtXitanium LITE Prog LED Xtreme driversPhilips Xitanium Lite Programmable LED drivers are value engineered to deliver a carefully selected feature set and high-end performance,making it a preferred choice for many outdoor applications. The portfolio offers high flexibility with a customizable operating window,enabling differentiation in LED lighting designs via system tuning and being prepared for LED efficacy upgrades.In this product family Philips offers drivers in both compact as well as stretched form factors with a balanced feature set, which offer high value for both OEM customers and end-users. The products can replace the existing programmable outdoor LED drivers and will bring significant improvement in programming, assembly into a luminaire and electrical performance. One of the key features is SimpleSet ®, an easy and fast way to configure the driver without the need to power the driver. Benefits•Ultimate robustness, offering peace of mind and lower maintenance costs •Balanced configurable feature set covering the most common applications•Easy to design-in and install for Insulation Class I and Class II applications•Energy savings through high efficiency and via a choice of dimming optionsFeatures•SimpleSet ®, wireless configuration interface•High surge immunity•Long lifetime and robust protection against moisture,vibration and temperature•Configurable operating windows (AOC)•External control interface 1-10V or LineSwitch •Autonomous dimming via integrated Dynadimmer or Dynadimmer LITE•Adjustable thermal protection for driver (DTL, select models)•Adjustable thermal protection for LED module (MTP,select models)•Simplified linear version of Constant Light Output(CLO LITE)Application•Road and street lighting•Area lighting •Tunnel lighting •Industrial lightingFebruary 2019Electrical input dataSpecification item Value Unit ConditionRated input voltage range202...254V ac Performance rangeRated input voltage230V acRated input frequency range47...63Hz Performance rangeRated input current0.72A@ rated output power @ rated input voltageMax. input current0.79A@ rated output power @ minimum performance input voltage Rated input power162W@ rated output power @ rated input voltagePower factor0.99@ rated output power @ rated input voltageTotal harmonic distortion9%@ rated output power @ rated input voltageEfficiency93%@ rated output power @ rated input voltageInput voltage AC range50...264V ac Operational rangeInput frequency AC range45...66Hz Operational rangeIsolation input to output DoubleElectrical output dataSpecification item Value Unit ConditionRegulation method Constant CurrentOutput voltage90...283V dcOutput voltage max.340V Peak voltage at open loadOutput current0.1...0.7AOutput current min programmable200mAOutput current min dimming100mAOutput current tolerance± 5%Output current ripple LF≤ 4%Ripple = peak / averageOutput current ripple HF≤ 6%Output power9...150WElectrical data controls inputSpecification item Value Unit ConditionOutput current amplitude dimmingControl method Dynadimmer LITE, LineSwitchsingle-stepDimming range15...100%Vlow : < 160Vac Vhigh : 170 ... 264VacGalvanic Isolation NALogistical dataSpecification item ValueProduct name Xi LP 150W 0.2-0.7A SL 230V S240 sXtOrder code871869648166000Logistic code 12NC9290 009 62606EAN38718696481677Pieces per box10Wiring & ConnectionsSpecification item Value Unit ConditionInput wire cross-section0.5...2.5mm2WAGO804, solid / stranded wire14...20AWG WAGO804, solid / stranded wireInput wire strip length10...11mmOutput wire cross-section0.2...1.5mm2WAGO250 (3.5 mm), solid / stranded wire16...24AWG WAGO250 (3.5 mm), solid / stranded wireOutput wire strip length8.5...9.5mmDimming wire cross-section0.5...2.5mm2WAGO804, solid / stranded wire14...20AWG WAGO804, solid / stranded wireDimming wire strip length10...11mmMaximum cable length2500mm Total length of wiring including LED module, one wayInsulationInsulation Mains EQUI LED LineSwitchMains Double Double NAEQUI Double Basic DoubleLED Double Basic DoubleLineSwitch NA Double DoubleDimensions and weightSpecification item Value Unit ConditionLength (A1)240mmWidth (B1)59.7mmWidth (B2)42.9mmHeight (C1)37.8mmFixing hole diameter (D1) 4.5mmFixing hole distance (A2)226mmWeight640gramOperational temperatures and humiditySpecification item Value Unit ConditionAmbient temperature-40...+55ºC Higher ambient temperature allowed as long as Tcase-max is notexceeded.Tcase-max90ºC Maximum temperature measured at T case-pointTcase-life80ºC Measured at T case-pointMaximum housing temperature130ºC In case of a failureRelative humidity10...90%Non-condensingStorage temperature and humiditySpecification item Value Unit ConditionAmbient temperature-40...+80ºCRelative humidity 5...95%Non-condensingLifetimeSpecification item Value Unit ConditionDriver lifetime100,000hours Measured temperature at T case-point is T case-life.Maximum failures = 10%Programmable featuresSpecification item Value Remark ConditionSet output current (AOC)SimpleSet See Design-in guide.Default output current: = 700 mAConstant Lumen Over Lifetime (CLO)YesDiagnostics YesLineSwitch single-step YesIntegrated Dynadimmer LITE Yes1-step, no light turn-off possibleFeaturesSpecification item Value Remark ConditionOpen load protection Yes Automatic recoveringShort circuit protection Yes Automatic recoveringOver power protection Yes Automatic recoveringHot wiring NoSuitable for fixtures with protection class I and II per IEC60598Over temperature protection driver Yes Automatic recoveringCertificates and standardsSpecification item ValueApproval marks CB / CCC / CE / ENECIngress Protection classification (IP)20Inrush currentSpecification item Value Unit ConditionInrush current I peak53A Input voltage 230VInrush current T width300µs Input voltage 230V, measured at 50% I peakDrivers / MCB 16A type B≤ 8pcs Indicative valueMCB Rating Relative number of LED driversB4A25%B6A40%B10A63%B13A81%B16A100% (stated in datasheet)B20A125%B25A156%B32A200%B40A250%C4A42%C6A63%C10A104%C13A135%C16A170%C20A208%C25A260%C32A340%C40A415%Driver touch current / protective conductor currentSpecification item Value Unit ConditionTypical touch current (ins. Class II)0.34mA peak Acc. IEC61347-1. LED module contribution not included Typical protective conductor current (ins. Class I)0.24mA rms Acc. IEC61347-1. LED module contribution not includedSurge immunitySpecification item Value Unit ConditionMains surge immunity (diff. mode)6kV L-N acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20usMains surge immunity (comm. mode)8kV L/N - EQUI acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us Control surge immunity (diff. mode)6kV Ls-L, Ls-N acc. IEC61000-4-5. 2 Ohm 1.2/50us, 8/20us Control surge immunity (comm. mode)8kV Ls - EQUI acc. IEC61000-4-5. 12 Ohm 1.2/50us, 8/20usAdditional informationSpecification item Default setting Remark ConditionAOC700mALineSwitch ONCLO OFFDynadimmer OFFGraphs Operating windowThermal GuardMains GuardPower factor versus output powerEfficiency versus output powerTHD versus output power©2019 Signify Holding, IBRS 10461, 5600 VB, NL. All rights reserved.The information provided herein is subject to change without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify.Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.Date of release: April 19, 2019 v3。
A_W_E2024:融合、精进与拓展的“大洗护时代”即将来临
别策划44特SPECIAL REPORT2024/4融合与精进:“洗+烘+护”多管齐下当“精致洗护”成为行业创新的风向标,企业开始不遗余力地将产品的功能边界不断外延,力图让洗衣机化身家庭衣物和其他生活用品的洗涤、烘干和护理“专家”,以满足更加细分和精致的消费诉求。
这场围绕着“大洗护场景”进行的技术升级和产品创新在AWE2024上得到淋漓尽致的展现。
在“洗衣”“干衣”“护衣”三者不断融合和集成的道路上,作为洗衣机领军品牌的卡萨帝拥有一骑绝尘的气势。
首次在AWE2024惊艳亮相的卡萨帝云脑洗衣机C7 XHGAD20L1U1,以20kg 的行业A W E2024:融合、精进与拓展的“大洗护时代”即将来临本刊记者 秦丽3月14日,2024年中国家电及消费电子博览会(AWE2024)如约而至。
卡萨帝、海尔、博世、西门子、松下、惠而浦、三星、LG、TCL 等众多洗衣机品牌都带来了自己最得意的创新之作,再次上演了一场产品和技术“大秀”,给洗衣机行业注入了澎湃的创新激情。
“洗+烘+护”多管齐下,智能加持下的场景细分,健康、节能与环保的多线并进,设计融入家居美学⋯⋯可以看出,挣扎于存量市场“泥沼”中的洗衣机行业,从来没有放弃以创新技术打破僵局的努力。
在为行业寻找新的发展契机的道路上,一幅描绘“大洗护场景”的画卷正被徐徐展开。
1 23 451.卡萨帝云脑洗衣机 C7 XHGAD20L1U12.海信罗马假日洗衣机WD100R43.三星9400D系列洗衣机、干衣机4.松下喜马拉雅系列洗烘护分区式智能一体机NA-G3D585.西门子i Q 700超氧洗烘套装WG54C8C10W/WQ56C8C10W452024/4了集成各种护衣技术,选择其除湿程序,还可进行室内除湿。
惠而浦W9衣物护理机WCC303HSDT 具有超宽幅蒸汽喷射口,蒸汽均匀渗透直达纤维深处抚平衣物褶皱,辅助360°立体循环风系统,能够迅速丰盈衣物形态,实现自动熨烫塑型。
森海塞尔 EW-D SKM-S BASE SET 基本套装 1 7 产品规格 (V1.6)说明书
DELIVERY INCLUDES• EW-D EM rack receiver• EW-D SKM-S handheld transmitter • MZQ 1 microphone clamp • 2 rod antennas• power supply with country adapters • rackmount set • 4 rubber feet • quick guide • safety guide• manufacturer declaration sheetVersatile and feature-rich digital wireless system for those who sing, speak or play instruments that allows for seamless product pairing and management via the EW-D Smart Assist App.With a metal housing, the robust handheld transmitter suits perfectly for daily use on stage.FEATURES• Digital wireless eliminates noise, interference andstatic bursts • UHF transmission greatly enhances range, reliabilityand scalability • Mobile App streamlines setup and operation and elimi-nates complicated menus • Automated setup creates reliable connections withminimal time and effort • Up to 2,240 selectable frequencies• Transmission range: up to 100 m in an ideal environ-ment (without obstacles)• Lithium Ion battery pack delivers up to 12 hours of ope-ration (up to 8 hours of operation with AA batteries)• 56 MHz Bandwidth will allow for up to 90 channels • Preserves every detail of even the most dynamic per-formances with 134 dB transmitter dynamic rangeACCESSORIESEW-D ASA (Q-R-S)Active Antenna Splitter 470 - 694 MHz Art. no. 508879EW-D ASA (T-U-V-W)Active Antenna Splitter 694 - 1075 MHz Art. no. 508880EW-D ASA (X-Y)Active Antenna Splitter 1350 - 1805 MHz Art. no. 508881EW-D ASA CN/ANZ (Q-R-S)Active Antenna Splitter 470 - 694 MHz Art. no. 508998EW-D AB (Q)Antenna Booster 470 - 550 MHz Art. no. 508873EW-D AB (R)Antenna Booster 520 - 608 MHz Art. no. 508874EW-D AB (S)Antenna Booster 606 - 694 MHz Art. no. 508875EW-D AB (U)Antenna Booster 823 - 865 MHz Art. no. 508876EW-D AB (V)Antenna Booster 902 - 960 MHz Art. no. 508877EW-D AB (Y)Antenna Booster1785 - 1805 MHz Art. no. 508878ADP UHF (470 - 1075 MHz)Passive directional antenna470 - 1075 MHzArt. no. 508863BA 70Rechargeable battery pack for SK and SKM-S Art. no. 508860L 70 USBCharger for BA 70 rechargeable battery packArt. no. 508861EW-D CHARGING SET Set of L 70 USB charger and 2 BA 70 rechargeable battery packs Art. no. 508862EW-D COLOR CODING SET Colored labels for wireless link identification for EM, SKM-S, SK Art. no. 508989EW-D SK COLOR CODING Colored labels for wireless link identification for SK Art. no. 508990EW-D SKM COLOR CODING Colored labels for wireless link identification for SKM-S Art. no. 508991EW-D EM COLOR CODINGColored labels for wireless link identification for EMArt. no. 508992PRODUCT VARIANTSEW-D SKM-S BASE SET (Q1-6)470.2 - 526 MHz Art. no. 508760EW-D SKM-S BASE SET (R1-6)520 - 576 MHz Art. no. 508761EW-D SKM-S BASE SET (R4-9)552 - 607.8 MHz Art. no. 508762EW-D SKM-S BASE SET (S1-7)606.2 - 662 MHz Art. no. 508763EW-D SKM-S BASE SET (S4-7)630 - 662 MHz Art. no. 508764EW-D SKM-S BASE SET (S7-10)662 - 693.8 MHz Art. no. 508765EW-D SKM-S BASE SET (U1/5)823.2 - 831.8 MHz & 863.2 - 864.8 MHz Art. no. 508766EW-D SKM-S BASE SET (V3-4)925.2 - 937.3 MHz Art. no. 508768EW-D SKM-S BASE SET (Y1-3)1785.2 - 1799.8 MHzArt. no. 508769MICROPHONE COMPATIBILITYMicrophone modules compatible with the EW-D SKM-S handheld transmitterMMD 835-1Dynamic microphone module with cardioid polar patternMMD 845-1Dynamic microphone module with supercardioid polar patternMME 865-1Pre-polarized condenser microphone module with supercardioid polar patternMMD 935-1Dynamic microphone module with cardioid polar patternMMD 945-1Dynamic microphone module with supercardioid polar patternMMK 965-1Condenser microphone module with switchable cardioid and supercardioid polar pattern MMD 42-1Dynamic microphone module with omni-directional polar patternNeumann KK 204Condenser microphone module with cardioid polar patternNeumann KK 205Condenser microphone module with supercardioid polar patternMM 435Dynamic microphone module with cardioid polar patternMM 445Dynamic microphone module with supercardioid polar patternME 9002Pre-polarized condenser microphone module with omni-directional polar patternME 9004Pre-polarized condenser microphone module with cardioid polar patternME 9005Pre-polarized condenser microphone module with supercardioid polar patternSystemAudio link frequency ranges Q1-6R1-6R4-9S1-7S4-7S7-10U1/5V3-4Y1-3470.2 - 526 MHz520 - 576 MHz552 - 607.8 MHz606.2 - 662 MHz630 - 662 MHz662 - 693.8 MHz823.2 - 831.8 MHz &863.2 - 864.8 MHz925.2 - 937.3 MHz1785.2 - 1799.8 MHzBluetooth® Low Energy(BLE) frequency range2402 - 2480 MHzAudio frequency response20 Hz - 20 kHz (-3 dB)@ 3 dBfsAudio THD≤ -60 dB for 1 kHz@ -3 dBfs input level Operating temperature-10 °C - +55 °C(14 °F - 131 °F)Relative humidity 5 - 95 % (non-condensing)EW-D EM (Rack Receiver)Input voltage11 - 13 V ⎓Input current≤ 300 mATransmit power (radiated)BLE: max. 10 mW EIRP Audio output power18 dBu max. Dimensions212 x 44 x 189 mm(8.35" x 1.73" x 7.44")Weight (without antennas and power supply)approx. 1000 g (2.2 l bs)EW-D SKM-S (Handheld Transmitter)Input voltage 2.0 - 4.35 VInput current< 300 mAPower supply 2 AA batteries 1.5 V (al-kali manganese) or BA 70rechargeable battery packOccupied bandwidth200 kHzTransmit power (radiated)Audio link: 10 mW ERP(Range Y1-3: 12 mW ERP)BLE: max. 10 mW EIRPDimensions (ø x l)(incl. MMD 835 microphonemodule)(without microphonemodule)50 x 268 mm (1.97" x 10.55")40 x 200 mm (1.57" x 7.87")Weight (without batteries)(incl. MMD 835 microphonemodule)(without microphonemodule)approx. 304 g (0.67 l bs)approx. 195 g (7.14 lbs)SPECIFICATIONSSet in packagingDimensions405 x 350 x 73 mm(15.91" x 13.78" x 2.87") Weight 2.9 kg (6.39 lbs)DIMENSIONSEW-D EMDIMENSIONSMikrofonmodul MMD835 - nur Beispiel EW-D SKM-SARCHITECT‘S SPECIFICATIONEW-D EM rack receiverThe stationary receiver with switching diversity technology shall be for use with a companion transmitter as part of a digital wireless RF transmission system.The receiver shall operate within ten UHF frequency ranges, with a switching bandwidth of up to 56 MHz: 470.2 – 526 M Hz, 520 – 576 MHz, 552 – 607.8 MHz, 606.2 – 662 M Hz, 630 – 662 MHz, 662 – 693.8 MHz, 823.2 – 831.8 M Hz, 863.2 – 846.8 MHz, 925.2 – 937.3 MHz, 1785.2 – 1799.8 MHz; selectable frequencies shall be up to 2,240. The receiver shall feature Bluetooth® Low Energy (BLE) at a frequency range between 2402 and 2480 M Hz for remote controlling the devices via a control App for iOS and And-roid.The audio frequency response shall be between 20 H z and 20 k Hz (-3 d B) @ 3 d Bfs. Audio total harmonic distortion (THD) shall be ≤ -60 d B for 1 k Hz @ -3 d Bfs input level. Dynamic range shall be 134 dB.The receiver shall be menu-driven with a backlit LC display showing the current frequency, channel number, mete-ring of RF level, metering of AF level, lock status, muting function, mute lock status, antenna switching diversity, app connection, gain, audio output level, menu and battery status of the associated transmitter. An auto-lock feature shall be provided to prevent settings from being acciden-tally altered.The receiver shall feature a balanced XLR-3M audio output with a maximum output of +18 d Bu along with an unbalan-ced ¼“ (6.3 m m) audio output with a maximum output of +12 d Bu. Two BNC-type input sockets shall be provided for connecting the antennas.The receiver shall operate on 12 V power supplied from the power supply unit or from a Sennheiser EW-D ASA an-tenna splitter. Power consumption shall be ≤ 300 m A. The receiver shall have a rugged metal housing; dimensions shall be approximately 212 x 44 x 189 m m (8.35“ x 1.73“ x 7.44“). Weight shall be approximately 1000 g rams (2.2 l bs) without antennas and power supply. Operating tempera-ture shall range from −10 °C to +55 °C (+14 °F to +131 °F). The receiver shall be the Sennheiser EW-D EM.EW-D SKM-S handheld transmitterThe handheld transmitter shall be for use with a compa-nion receiver as part of a digital wireless RF transmission system.The handheld transmitter shall operate within tenUHF frequency ranges, with a switching bandwidth ofup to 56 M Hz: 470.2 – 526 M Hz, 520 – 576 MHz, 552– 607.8 M Hz, 606.2 – 662 M Hz, 630 – 662 MHz, 662 – 693.8 M Hz, 823.2 – 831.8 M Hz, 863.2 – 846.8 MHz, 925.2 – 937.3 MHz, 1785.2 – 1799.8 MHz; selectable frequencies shall be up to 2,240.The audio frequency response shall be between 20 H z and 20 k Hz (-3 d B) @ 3 d Bfs. Audio total harmonic distortion (THD) shall be ≤ -60 d B for 1 k Hz @ -3 d Bfs input level. Dynamic range shall be 134 dB.A programmable mute switch shall be provided to mute or unmute the audio signal.The handheld transmitter’s parameters shall be configu-rable in the associated receiver’s menu and synchronized with the handheld transmitter via Bluetooth Low Energy (BLE).Power shall be supplied to the handheld transmitter by two 1.5 V A A size batteries or by one Sennheiser BA 70 rechar-geable battery pack. Operating time shall be typically12 hours with a battery pack and up to 8 hours with AA batteries.Occupied bandwidth shall be 200 k Hz. Transmit power (radiated) shall be 10 mW ERP (1785.2 – 1799.8 MHz Range: 12 m W ERP).The handheld transmitter shall have a rugged metal housing; dimensions shall be approximately 50 m m (1.97“) in diameter and 268 m m (10.55“) in length including a Sennheiser MMD 835 microphone module. Weight inclu-ding MMD 835 microphone module shall be approximately 304 g rams (0.67 l bs). Operating temperature shall range from −10 °C to +55 °C (+14 °F to +131 °F).A range of different microphone heads shall be available for the handheld transmitter.The handheld transmitter shall be the Sennheiser EW-D SKM-S.Sennheiser electronic GmbH & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · 。
SEW电子产品介绍
TASC /2010.11
Driving the world
7
TASC Training
单轴运动控制的标准解决方案
TASC /2010.11
卷曲缠绕 定位控制, 起升机构,
旋转位置控制 -针对定位控制
-针对卷曲控制
-针对移动锯控制
-或其他应用方案
移动锯 滚刀
输送机, 仓储,起重机
Driving the world
TASC /2010.11
Driving the world
TASC Training
满足不同应用需求的产品系列
软件产品--建立在IPOSplus基础上的应用模块
适用于MOVIDRIVE应用版变频器 简洁直观的用户界面, 用户只需按要求 输入工艺参数, 控制系统自动完成软件组态 方便的实时监视画面 在线帮助功能, 帮助用户迅速完成项目设计 多种应用模块, 适用于不同应用需求
核心 – 产品- 优势: 非常高的功率密度 高动态电机 对于高质量和模块系统的高性价比
伺服驱动器: MOVIDRIVE B and MOVIAXIS
TASC /2010.11
Driving the world
12
TASC Training
异步伺服电机特点
异步伺服电机CT/CV系列
采用CFC矢量控制原理, 达到高动态控制响应 最大动态转矩300%Mn 产品规格从CT71D 到 CV200L 正余弦编码器和电机热保护为标准配置 可以选择Hiperface高性能接口编码器 更高的性能价格比
TASC /2010.11
Driving the world
6
TASC Training
12
丰富的功能 - 基本单元的位置控制
STM32L4系列基于Arm Cortex-M4核的低功耗MCU开发板数据简介说明书
For further information contact your local STMicroelectronics sales office.July 2018DB3143 Rev 41/4B-L475E-IOT01ADiscovery kit for IoT node,multi-channel communication with STM32L4Data briefFeatures•Ultra-low-power STM32L4 Series MCUs based on Arm ® Cortex ®-M4 core with 1Mbyte of Flash memory and 128Kbytes of SRAM, in LQFP100 package •64-Mbit Quad-SPI (Macronix) Flash memory •Bluetooth ® V4.1 module (SPBTLE-RF)•Sub-GHz (868MHz or 915MHz)low-power-programmable RF module (SPSGRF-868 or SPSGRF-915)•802.11 b/g/n compliant Wi-Fi ® module from Inventek Systems (ISM43362-M3G-L44)•Dynamic NFC tag based on M24SR with its printed NFC antenna • 2 digital omnidirectional microphones (MP34DT01)•Capacitive digital sensor for relative humidity and temperature (HTS221)•High-performance 3-axis magnetometer (LIS3MDL)•3D accelerometer and 3D gyroscope (LSM6DSL)•260-1260hPa absolute digital output barometer (LPS22HB)•Time-of-Flight and gesture-detection sensor (VL53L0X)• 2 push-buttons (user and reset)•USB OTG FS with Micro-AB connector •Expansion connectors:–Arduino™ Uno V3–PMOD•Flexible power-supply options:–ST LINK USB V BUS or external sources •On-board ST-LINK/V2-1debugger/programmer with USBre-enumeration capability: mass storage, Virtual COM port and debug portPicture is not contractual.•Comprehensive free software HAL libraryincluding a variety of examples, as part of the STM32Cube M C U Package •Support of a wide choice of IntegratedDevelopment Environments (IDEs) including IAR ™, Keil ®, GCC-based IDEs, Arm ® Mbed Enabled ™•Arm ® Mbed ™online (see )Description B-L475E-IOT01A DescriptionThe B-L475E-IOT01A Discovery kit for IoT node allows users to develop applications withdirect connection to cloud servers.The Discovery kit enables a wide diversity of applications by exploiting low-powercommunication, multiway sensing and Arm® Cortex® -M4 core-based STM32L4 Seriesfeatures.The support for Arduino Uno V3 and PMOD connectivity provides unlimited expansioncapabilities with a large choice of specialized add-on boards.System requirements•Windows® OS (XP, 7, 8 and 10), Linux® or macOS®(a)•USB Type-A to Micro-B cableDevelopment toolchains•Keil® MDK-ARM(b)•IAR™ EWARM(b)•GCC-based IDEs including free SW4STM32 from AC6•Arm®(c) Mbed Enabled™ onlineDemonstration softwareThe demonstration software is preloaded in the STM32L475VG Flash memory for easydemonstration of the device peripherals in standalone mode. The latest versions of thedemonstration source code and associated documentation can be downloaded from the/x-cube-cloud webpage.a.macOS® is a trademark of Apple Inc., registered in the U.S. and other countries.b.On Windows® only.c.Arm and Mbed are registered trademarks or trademarks of Arm Limited (or its subsidiaries) in the US and orelsewhere.2/4DB3143 Rev 4DB3143 Rev 43/4B-L475E-IOT01A Laser considerationLaser considerationThe VL53L0X contains a laser emitter and corresponding drive circuitry. The laser output is designed to remain within Class 1 laser safety limits under all reasonably foreseeableconditions including single faults, in compliance with IEC 60825-1:2014 (third edition). The laser output will remain within Class 1 limits as long as STMicroelectronics recommended device settings are used and the operating conditions, specified in the STM32L4 Series datasheets, are respected. The laser output power must not be increased by any means and no optics should be used with the intention of focusing the laser beam. Figure 1 showsthe warning label for Class 1 laser products.Figure 1. Label for Class 1 laser productsOrdering informationTo order the B-L475E-IOT01A Discovery kit for IoT node, depending on the frequency of the Sub-GHz module, refer to Table 1.Revision historyTable 1. Ordering informationOrder code Sub-GHz operating frequencyB-L475E-IOT01A1915MHz B-L475E-IOT01A2868MHzTable 2. Document revision historyDate RevisionChanges02-Feb-20171Initial version.27-Mar-20172Updated Features and Description to add the PMOD connector.24-Apr-20173Added Section : Laser consideration to add Class 1 laser information.11-Jul-20184Updated the description of the Wi-Fi ® module in Features .B-L475E-IOT01AIMPORTANT NOTICE – PLEASE READ CAREFULLYSTMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products.No license, express or implied, to any intellectual property right is granted by ST herein.Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.Information in this document supersedes and replaces information previously supplied in any prior versions of this document.© 2018 STMicroelectronics – All rights reserved4/4DB3143 Rev 4。
150年创新不止,A.O.史密斯引领好风好水健康生活
别策划52特SPECIAL REPORT2024/4150年创新不止,A.O.史密斯引领好风好水健康生活东禾3月14日,2024年中国家电及消费电子博览会(AWE2024)在上海新国际博览中心拉开帷幕。
A.O.史密斯携“全屋好风好水,乐享健康生活”理念震撼亮相。
从智慧五恒系统,到好风好水健康厨房,从150年旗舰/经典系列,到旗下年轻时尚品牌佳尼特⋯⋯A.O.史密斯带来的“高端智慧互联一站式好风好水解决方案”乐享体验,彰显了已拥有150年历史的A.O.史密斯的创新底蕴和活力。
智慧五恒系统,以“好风”营造诗意的栖居在AWE2024上,A.O.史密斯打造了一套沉浸式智能生活体验间,通过部署“智慧五恒系统”,让恒温、恒湿、恒氧、恒洁、恒静的“好风”流动在家中每个角落,冷热宜人、微风正好、不干不燥、静谧舒爽。
A.O.史密斯AI-LiNK 五恒系统,告别了空调和新风各自运行、井水不犯河水的模式,通过中央空气处理机组,外加冷热一体的“天风地水”532024/4为中式深碗量身定做,充分模拟手动洗涤场景,上下3个大冲力喷臂旋转配合,让餐具竟然实现了转着洗且360°无死角,残渣油污都能洗净。
洗碗机还能通过AI-LiNK 直连橱下净水机,实现净水洗碗,告别手动加盐,让餐具不留水垢,也不含钙镁离子和重金属。
配合热风烘干和内外气流交替的烘干方式,洗后餐具的抑菌率达到99.99%,并持续长达72小时,更加干净健康、安全又安心。
“自旋式”洁霸洗碗机做到深度清洁无惧挑战,现场还邀请观众参与碗碟“转运涂鸦”游戏。
无论多么缤纷的碗碟,经过自旋式洗碗机的洗礼,都能重新变得洁净如新,展现出A.O.史密斯带来的强大净洗实力。
A.O.史密斯3D 蒸霸蒸烤一体机通过采用创新的上下双蒸汽加热系统,让全腔充盈澎湃蒸汽,快速锁鲜,保持食物原汁原味;高温热风循环可以逼出食材自身油脂,无需额外放油,就能让食材皮脆肉嫩、鲜美多汁,拒绝高油高盐,乐享健康饮食;此外,烹饪过程中还实现了直连净水,告别手动加水的繁琐步骤,乐享轻松从容。
Sensirion SFC6000D和SFM6000D高性价比流量控制器和流量计数据手册说明书
Datasheet – SFC6000D, SFM6000DBest price-performance ratio Mass Flow Controller, Flow MeterHighlights• Disruptive design with integrated electronics • High accuracy/repeatability (2% / 0.2% set point) •Wide control range (500:1)• RS485 and I 2C digital interface• No drift and no re-calibration required •Ultra-fast settling time (100 ms)The heart of SFC6000D and SFM6000D is the unsurpassed Sensirion CMOSens® technology. It combines a high precision sensor element with state-of-the-art signal processing on a single chip and thereby providing an accurately calibrated and temperature compensated signal. In fact, the full functionality of the device is integrated directly on the dedicated ASIC chip, which drastically limits the number of electrical components used. Thanks to CMOSens® sensor technology, Sensirion’s flow meters and controllers achieve unmatched ratings for speed, accuracy and repeatability at very attractive system cost. Due to the excellent long-term stability of CMOSens® chips, no recalibration is required.Device Overview (Page 14: Full product list)High performance and low cost of SFC6000D and SFM6000D make them the best choice for a wide range of applications, such as gas flushing, FOUP, analytical instrumentation, coating and medical equipment, process automation and gas mixing to name a few. CMOSens® SFC6000D and SFM6000D measure gas mass flow by the calorimetric principle based on heat transfer. A heater element on a thermally insulated membrane and two thermopiles up-stream and downstream are integrated on a single silicon chip. In the presence of gas flow, the temperature distribution up- and downstream is disturbed. This asymmetry is then measured. The measurement area as well as the A/D-converter and further signal processing are based on a single chip using CMOS standard processes (see Figure 1). Moreover, the same chip also takes over the function of a microprocessor in a standard mass flow controller, directly regulating the valve. This drastically reduces the complexity and the number of electronic components in SFC6000D.MEMS-based CMOSens® technology enables a significantly larger cross section of the gas channel than bypass capillary diameter in conventional mass flow controllers. This channel design makes the device more robust against particles, clogging and humidified gases.The minimal thermal mass of the membrane results in an ultra-fast sensor response time of 3-4 ms. Since the whole design of the amplification, A/D conversion, digital linearization and temperature compensation is matched to the sensor speed, a fully compensated flow measurement value can be delivered every millisecond. Combined with advanced control algorithms, SFC6000D offers greatly reduced settling times compared to conventional mass flow controllers.Furthermore, a special arrangement of the two temperature sensors, on-chip temperature compensation and the minimization of noise sources lead to unbeatable performance with regards to repeatability and accuracy over a large dynamic range. Thanks to the unique CMOSens® technology, the SFC6000D mass flow controllers and SFM6000D mass flow meters show zero-drift performance and control true mass flow independently of the ambient temperature and pressure changes.Figure 1. Cross-section view of the gas channel.Scan me to provide feedback1Quick Start GuideSFC6000D and SFM6000D can be evaluated easily using the EK-F5x evaluation kit. EK-F5x is compatible with all Sensirion mass flow meters and controllers of 5000 and 6000 families. A quick start guide is included in EK-F5x and can also be found on Sensirion website for the flow meter and mass flow controller.Figure 2. EK-F5x is the fastest way to evaluate Sensirion flow meters and controllers of 5000 and 6000 families.2Sensor SpecificationsTable 1. Overview of CMOSens® SFC6000D Mass Flow Controller and SFM6000D Mass Flow Meter Specifications. X stands for C=controller, or M=Meter. All data, unless otherwise noted, apply for the following calibration conditions: Temperature 20°C, Air and horizontal mounting position. SFC is calibrated at 3.0 bar overpressure (inlet: 4.0 bar absolute) against atmosphere (outlet: 1.0 bar absolute). SFM – at atmospheric pressure.*Air/N2 and CO2 are used for physical calibration. The other gasses are modelled. The accuracy stated for the modelled gasses is “typical” and cannot be guaranteed.1 Including offset, non-linearity and hysteresis. Measured against NIST traceable reference.2 Step answer from 10% to 100% of full scale within ±5% of set point error band.3 to within ±2 % of setpoint4 Pressure between flow inlet and flow outlet. For availability of higher differential pressure option, please contact Sensirion2.1Gas calibrationSFC6000D and SFM6000D are factory-calibrated for multiple gasses. Table 1 lists the available calibrations and the calibration gas numbers saved in internal memory of the device. The desired calibration can be selected by the user. Please see the application notes describing the communication interfaces or quick start guide for instructions on how to activate a desired calibration. These can be found on /sfc6000. Please note that the maximum flow rate achievable with each MFC is strongly dependent on the gas measured. Table 1 lists the maximum flow rates for all gasses for which the products have been calibrated.The calibration for Air and N2 is identical. It can be used with both gasses with the same result.2.2AccuracyAccuracy describes how precisely the mass flow controller / meter is able to control / measure flow rate with respect to the absolute flow of a given gas. Accuracy is mostly determined by the quality of the calibration and can be different for each calibration gas.For example: with mass flow controller set point of 10 slm and a real flow rate measured by an external reference of 10.2 slm, the set point accuracy would be calculated as:Accuracy=10.2−1010.2=2.0% set point2.3RepeatabilityUnlike accuracy, repeatability is not influenced by calibration quality and is directly related to the build quality of the mass flow controller / meter. It describes how reliably mass flow controller is able to reach a given setpoint (applied repeatably). For mass flow meter, it describes, how reliably the instrument measures the same flow repeatably.For example: if a mass flow meter measures the absolute flow of 10 slm multiple times and the resulting flow measurement results follow a Gaussian distribution centered around 9.97 slm with 0.02 standard deviation, then the repeatability is calculated as:Repeatability=0.029.97=0.2% set pointGenerally, for mass flow controllers / meters repeatability is better than accuracy. For mass flow controllers, in applications where an additional calibration or feedback loop exists, it is possible to relay on repeatability rather than accuracy of mass flow controller. One example would be an optimized process, where the setpoint value of mass flow controller is fine-tuned to give the desired outcome. In such case, it is not important that the absolute flow rate is close to the set point – instead, it is important that the optimized set point can be achieved repeatably to give the same process outcome.Accuracy and repeatability of SFC6000D and SFM600D devices are dominated by set point error at high flows and by the full-scale error at low flows. Figure 3 demonstrates this.Figure 3. Accuracy and repeatability at different set points. spa = set point.2.4Settling timeThe CMOSens® SFC6000D mass flow controller has an ultra-fast settling time. Figure 4 shows the typical response time of the SFC6000D in comparison to a mass flow controller using conventional capillary technology.Figure 4. Settling time of the SFC6000D vs. typical thermal mass flow controller.2.5Wide control and measurement rangeThe wide control range of the SFC6000D brings a decisive benefit in applications with a wide dynamic range of gas flows. Instead of two devices used for high flow and low flow ranges, a single SFC6000D device can efficiently cover a flow range of three orders of magnitude.Control and measurement range is defined as 0.2% - 100% full scale. This means that a mass flow controller with e.g. 50 slm full scale flow, can control flows lower than 0.1 slm. When relying on repeatability rather than absolute accuracy, even lower flows can be controlled.2.6Pressure dropMass flow controllers need pressurized gas sourced to operate. Pressure drop is generated, when gas passesthrough a mass flow controller. When evaluating a mass flow controller, it is important to verify that at maximum required flow rate, for a given gas, the pressure drop will be smaller than the inlet pressure –otherwise the desired maximum flow rate will not be possible to achieve.Mass flow meters have generally much lower pressure drop due to the absence of the valve and hence this is rarely a practical problem.Table 1 lists pressure drop at full scale flow of Air or N2. At the same setpoint, for gasses heavier than air, the pressure drop would generally be higher. For gasses lighter than air – it would be lower. Pressure drop scales approximately linearly with the density of the gas.3Electrical specificationsTable 2. Electrical specifications4Sensor OperationSFC6000D and SFM6000D are configured with RS485 and I2C interfaces. Please see the Technical download (/sfc6000) section for instruction on how to use these.For OEM projects with MOQ of 100 pcs / yr Analog Voltage interface is available on sister platform SFC6000 and SFM6000. Profibus, Modbus and other protocols are available on request.4.1RS485 interfaceThe pinout of the M8 connector available on SFC6000D and SFM6000D is shown below.Figure 5. Pinout of M8 connector fitted on SFC6000D and SFM6000D with RS485 interface.The maximum data readout rate available with RS485 interface is 200 Hz. It is recommended that the cable length between the master and the sensor does not exceed 3m.EK-F5x evaluation kit is designed to work with RS485 interface. When using the evaluation kit with Windows PC, the highest achievable data readout rate is 20 Hz.4.2I2C interfaceSFC6000D and SFM6000D can be operated by standard I2C interface. To access I2C interface, please remove the green cap from the sensor and unplug the 6-pin cable inside the sensor. Please make sure that the sensor is not powered, when doing so. Unplugging the internal 6-pin cable, while the device is powered will damage it.An example of a matching cable assembly is Molex Micro-Lock Plus 0451110606. The sensor is equipped with a Molex Micro-Lock Plus connector with 6 circuits and a 1.25 mm pitch (UPC: 889056511957), which is shown in Figure 6.Figure 6. Pinout of 6-pin connector on the sensor PCB used for I2C communication.Using I2C interface offers a benefit of faster data readout rates – up to 1 kHz, as compared to 200 Hz with RS485.4.3InitStep and Controller gainThe regulation parameters (InitStep and Controller gain) allow fine tuning of the PID controller. They let the user achieve a desired compromise between speed, overshoot, and control stability. The configured gain and initstep are reset upon unplugging the device.4.3.1InitStepInitStep refers to a normalized initial valve voltage. This voltage value will be added to the valve control value if the regulator is in the normal regulation mode and a setpoint value unequal zero is specified. This normalized InitStep value reflects the fact that for instance a 24 V valve starts to open only if the valve voltage is higher than several volts. The customer has the possibility to change this value. Setting a higher InitStep will result in a faster controller but may lead to overshoots. A lower value will result in a smoother opening behavior but may lead to a slower response. The ideal InitStep depends on input pressure and temperature. Please note,InitStep value is stored in volatile memory and will be reset to the factory value, after the device is unplugged or reset.4.3.2Controller gainThe Controller gain refers to a normalized gain parameter, which is set to 1 by default. This gain factor will be multiplied to the control deviation, which is the difference between desired setpoint and measured value, and a correction of the valve control voltage will be applied depending on this control deviation value. If the customer gain factor is increased, this results in a larger change in the output for a given change in the control deviation.A too low Controller gain value results in a smaller output response to a large input control deviation and therefore to a less responsive / slower controller. On the other hand, if the Controller gain is too high, the system can become unstable: show oscillations and overshoots. As the valve characteristics depend for instance on pressure, the control action may be too strong when responding to system disturbances at high pressures. Therefore, a smaller gain factor may be advisable at higher pressures and the customer has the possibility to tune this parameter according to his conditions and requirements. Please note, that it is also possible to set Controller gain values smaller than 1.5Physical Specification5.1FittingsSFC6000D and SFM6000D are factory-fitted with 6 mm push-in fittings (QSPK18-6). These fittings can be safely removed to reveal Festo QSP-type mounting slot. Any compatible QSP fittings can be installed without impacting the performance of the device.Please note that the supplied QSP push-in fittings are not compatible with O2-rich gasses due to the grease used. To use your device with O2-rich gasses, please replace factory-installed fittings on SFC6000D and SFM6000D with the downmount flange provided. When using third-party fittings, please make sure the substitute is compatible with the gas you want to use.For an example list of compatible fittings and the instructions on how to replace them, please see the application note at Technical download (/sfc6000). Other custom-made fittings are available from Sensirion for OEM projects.5.2Wetted materials & compatibilityTable 3 gives an overview of the materials wetted by the gas. For high volume OEM applications different specialized materials for the body, valve and sealing can be used with sister products, SFC6000 and SFM6000.Table 3. Overview of wetted materials5.3Safety instructions5.3.1Oxygen-rich gasesMost push-in fittings are not compatible with O2-rich gasses (more than 21% O2) due to the grease used. This is also the case with the factory-provided QSP push-in fittings on SFC6000D and SFM6000D. At elevated pressures and temperatures, there is a risk of self-ignition of the grease. To use your device with O2-rich gasses, please use the downmount flanges included or install other O2-compatible fittings.5.3.2Toxic gasesDue to relatively high leakage rate of the push-in connectors, the sensors are not suitable for operation with toxic gasses. If the connectors are replaced, the whole gas assembly must be checked for leakage before applying toxic gas to the device.5.3.3Aggressive or corrosive gasesPlease make sure that the gases used are compatible with the wetted materials listed in this chapter. In case of doubt, please contact Sensirion for further advice. Corrosive gasses can damage the sealing or the CMOSens® chip.5.3.4Flammable gasesSFC6000D and SFM6000D are not designed to be operated with flammable gasses. Please check SFC5xxx and SFM5xxx series to use such gasses.5.4Physical dimensions and mounting informationPhysical dimensions and mounting information are shown below. The flexible cable between the valve and the green housing can add around 4-6 mm to the total height of SFC6000D.It is recommended to mechanically fix the sensor during measurement. This will avoid movement of the device and flow disturbances.The sensor can be mounted from below with PT screws: size K30, max. depth inside housing: 6mm. Alternatively, it can be mounted from the side, using the through-holes. Finally, SFC6000D has two M2.5 mounting slots below the valve – these can be used to fix the sensor from above but require a (temporary) removal of the green cap. Downmount fittings available with SFC6000D and SFM6000D offer additional mounting holes.Figure 7. Physical dimensions and mounting information for SFC6000D with push-in fittings. All units are in [mm].Figure 8. Physical dimensions and mounting information for SFM6000D with push-in fittings. All units are in [mm].Figure 9. Physical dimensions and mounting information for SFC6000D with downmount fittings. All units are in [mm].Figure 10. Physical dimensions and mounting information for SFM6000D with downmount fittings. All units are in [mm].6Flow unitsSFC6000D and SFM6000D are calibrated in “standard units” – namely slm (standard liter per minute). Table 4 lists other common units used for measuring gas flow and a relationship between them. If your device appears to show c.a. 7% error vs your reference, it is possible the reference is displaying flow in “norm” units.Table 4. Common units used to express gas flow rates.Example:10 slm (20°C / 68°F, 1013 mbar) = 9.32 ln/min (0°C, 1013 mbar)7OEM optionsSFC6000D and SFM6000D mass flow controllers / meters are all special versions of Sensirion’s SFC6000 and SFM6000 platform. SFC6000D and SFM6000D were designed as distribution products to meet a wide range of needs. In case SFC6000D or SFM6000D does not meet exactly the requirements for a given application, Sensirion recommends looking at SFC6000 and SFM6000 mass flow controllers / meters, which are available with a variety of configurations (fittings, flow ranges, calibrations, interfaces) and are generally built on order. These devices are available directly from Sensirion with a minimum order quantity (MOQ) of 100 pcs. SFC6000 and SFM6000 also allow for OEM product development in the context of high-volume projects. Possibilities involve different communication interfaces, wetted materials and gas calibrations.8Ordering InformationTable 5. Products in SFC6000D and SFM6000D series and a compatible evaluation kit9Revision HistoryImportant NoticesWarning, Personal InjuryDo not use this product as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Do not use this product for applications other than its intended and authorized use. Before installing, handling, using or servicing this product, please consult the data sheet and application notes. Failure to comply with these instructions could result in death or serious injury.If the Buyer shall purchase or use SENSIRION products for any unintended or unauthorized application, Buyer shall defend, indemnify and hold harmless SENSIRION and its officers, employees, subsidiaries, affiliates and distributors against all claims, costs, damages and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if SENSIRION shall be allegedly negligent with respect to the design or the manufacture of the product.ESD PrecautionsThe inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation, take customary and statutory ESD precautions when handling this product. See application note “ESD, Latchup and EMC” for more information.WarrantySENSIRION warrants solely to the original purchaser of this product for a period of 12 months (one year) from the date of delivery that this product s hall be of the quality, material and workmanship defined in SENSIRION’s published specifications of the product. Within such period, if proven to be defective, SENSIRION shall repair and/or replace this product, in SENSIRION’s discretion, free of charge to the Buyer, provided that:•notice in writing describing the defects shall be given to SENSIRION within fourteen (14) days after their appearance; •such defects shall be found, to SENSIRION’s reasonable satisfaction, to have arisen from SENSIRION’s faulty design, material, or workmanship;•the defective product shall be returned to SENSIRION’s factory at the Buyer’s expense; and•the warranty period for any repaired or replaced product shall be limited to the unexpired portion of the original period. This warranty does not apply to any equipment which has not been installed and used within the specifications recommended by SENSIRION for the intended and proper use of the equipment. EXCEPT FOR THE WARRANTIES EXPRESSLY SET FORTH HEREIN, SENSIRION MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT. ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED AND DECLINED.SENSIRION is only liable for defects of this product arising under the conditions of operation provided for in the data sheet and proper use of the goods. SENSIRION explicitly disclaims all warranties, express or implied, for any period during which the goods are operated or stored not in accordance with the technical specifications.SENSIRION does not assume any liability arising out of any application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. All operating parameters, including without limitation recommended parameters, must be validated for each customer’s applications by customer’s technical experts. Recommended parameters can and do vary in different applications.SENSIRION reserves the right, without further notice, (i) to change the product specifications and/or the information in this document and (ii) to improve reliability, functions and design of this product.Headquarters and SubsidiariesSensirion AG Laubisruetistr. 50CH-8712 Staefa ZH Switzerlandphone: +41 44 306 40 00 fax: +41 44 306 40 30 ****************** Sensirion Inc., USAphone: +1 312 690 5858*********************Sensirion Korea Co. Ltd.phone: +82 31 337 7700~3*********************/kr Sensirion Japan Co. Ltd.phone: +81 45 270 4506*********************/jpSensirion China Co. Ltd.phone: +86 755 8252 1501*********************/cnSensirion Taiwan Co. Ltd phone: +886 2 2218-6779****************** To find your local representative, please visit /distributorsCopyright© 2022, by SENSIRION. CMOSens® is a trademark of Sensirion. All rights reserved。
KSZ9021RN to KSZ9031RNX Migration Guide
KSZ9021RN to KSZ9031RNXMigration GuideRev. 1.1IntroductionThis document summarizes the hardware pin and software register differences for migrating from an existing board design using the KSZ9021RN PHY to a new board design using the KSZ9031RNX PHY. For hardware and software details, consult reference schematic and data sheet of each respective device.Data sheets and support documentations can be found on Micrel’s web site at: .Differences SummaryTable 1 summarizes the supported device attribute differences between KSZ9021RN and KSZ9031RNX PHY devices.Device Attribute KSZ9021RN KSZ9031RNXReduced Gigabit Media Independent Interface (RGMII) RGMII Version 1.3 (power-up default) using off-chip data-to-clock delays with register options to:•Set on-chip (RGMII Version 2.0) delays•Make adjustments and corrections to TXand RX timing pathsRGMII Version 2.0 (power-up default) using on-chip data-to-clock delays with register options to:•Set off-chip (RGMII Version 1.3) delays•Make adjustments and corrections to TXand RX timing pathsTransceiver (AVDDH)Voltage3.3V only 3.3V or 2.5V (commercial temperature only)Digital I/O (DVDDH)Voltage3.3V or 2.5V 3.3V, 2.5V or 1.8VIndirect Register Access Proprietary (Micrel defined) –Extended Registers IEEE defined –MDIO Manageable Device (MMD) RegistersEnergy-Detect Power-Down (EDPD) Mode Not Supported Supported for further power consumptionreduction when cable is disconnected; Disabledas the power-up default and enable using MMDregisterIEEE 802.3azEnergy Efficient Ethernet (EEE) Mode Not Supported Supported with:•Low Power Idle (LPI) mode for1000Base-T and 100Base-TX•Transmit Amplitude reduction for10Base-T (10Base-Te)•Associated MMD registers for EEEWake-on-LAN (WOL) Not Supported Supported with:•Wake-up using detection of Link Status,Magic Packet, or Custom-Packet•PME_N interrupt output signal•Associated MMD registers for WOL Table 1. Summary of Device Attribute Differences between KSZ9021RN and KSZ9031RNXPin DifferencesTable 2 summarizes the pin differences between KSZ9021RN and KSZ9031RNX PHY devices. Pin #KSZ9021RNKSZ9031RNXPin NameType Pin FunctionPin NameTypePin Function1 AVDDH P 3.3V analog V DD AVDDH P 3.3V/2.5V (commercial temp only) analog V DD 12 AVDDH P 3.3V analog V DD AVDDH P 3.3V/2.5V (commercial temp only) analog V DD 13VSS_PSGndDigital groundNC–No connectThis pin is not bonded and can be connected to digital ground for footprint compatibility with the Micrel KSZ9021RN Gigabit PHY.16 DVDDH P3.3V / 2.5V digital V DD DVDDH P 3.3V, 2.5V, or 1.8V digital V DD_I/O 17 LED1 /PHYAD0I/OLED Output:Programmable LED1 OutputConfig Mode:The pull-up/pull-down value is latched as PHYAD[0] during power-up / reset.LED1 /PHYAD0 /PME_N1I/O LED1 output:Programmable LED1 outputConfig mode:The voltage on this pin issampled and latched during the power-up/reset process to determine the value of PHYAD[0].PME_N output:Programmable PME_N output (pin option 1). This pin function requires an external pull-up resistor to DVDDH (digital V DD_I/O ) in a range from 1.0k Ω to 4.7k Ω. When asserted low, this pin signals that a WOL event has occurred.When WOL is not enabled, this pin function behaves as per the KSZ9021RN pin definition.This pin is not an open-drain for all operating modes.34 DVDDH P3.3V / 2.5V digital V DD DVDDH P 3.3V, 2.5V, or 1.8V digital V DD_I/O38 INT_N O Interrupt OutputThis pin provides aprogrammable interrupt output and requires an external pull-up resistor to DVDDH in the range of 1K to 4.7K ohms for active low assertion.INT_N/O Interrupt OutputThis pin provides aprogrammable interrupt output and requires an external pull-up resistor to DVDDH in the range of 1K to 4.7K ohms for active low assertion.This pin is an open-drain.PME_N2 PME_N output: Programmable PME_N output (pin option 2). When asserted low, this pin signals that a WOL event has occurred.When WOL is not enabled, this pin function behaves as per the KSZ9021RN pin definition. This pin is not an open-drain for all operating modes.40 DVDDH P 3.3V / 2.5V digital V DD DVDDHP3.3V, 2.5V, or 1.8V digitalV DD_I/O47 AVDDH P 3.3V analog V DD NC–NoconnectThis pin is not bonded and canbe connected to AVDDH powerfor footprint compatibility withthe Micrel KSZ9021RN GigabitPHY.48 ISET I/O Set transmit output levelConnect a 4.99KΩ 1%resistor to ground on thispin. ISET I/O Set the transmit output levelConnect a 12.1kΩ 1% resistorto ground on this pin.Table 2. Pin Differences between KSZ9021RN and KSZ9031RNXStrapping Option DifferencesThere is no strapping pin difference between KSZ9021RN and KSZ9031RNX.Register Map DifferencesThe register space within the KSZ9021RN and KSZ9031RNX consists of direct-access registers and indirect-access registers.Direct-access RegistersThe direct-access registers comprise of IEEE-Defined Registers (0h – Fh) and Vendor-Specific Registers (10h – 1Fh). Between the KSZ9021RN and KSZ9031RNX, the direct-access registers and their bits have the same definitions, except for the following registers in Table 3.Direct-access RegisterKSZ9021RN KSZ9031RNXName Description Name Description3h PHYIdentifier2 Bits [15:10] (part of OUI) – same asKSZ9031RNXBits [9:4] (model number) – unique forKSZ9021RNBits [3:0] (revision number) – uniquedepending on chip revision PHY Identifier 2 Bits [15:10] (part of OUI) – same asKSZ9021RNBits [9:4] (model number) – unique forKSZ9031RNXBits [3:0] (revision number) – uniquedepending on chip revisionBh ExtendedRegister –Control Indirect Register AccessSelect read/write control andpage/address of Extended RegisterReserved ReservedDo not change the default value ofthis registerCh ExtendedRegister –Data Write Indirect Register AccessValue to write to Extended RegisterAddressReserved ReservedDo not change the default value ofthis registerDh ExtendedRegister –Data Read Indirect Register AccessValue read from Extended RegisterAddressMMD Access –ControlIndirect Register AccessSelect read/write control and MMDdevice addressEh Reserved ReservedDo not change the default value ofthis register MMD Access –Register/DataIndirect Register AccessValue of register address/data for theselected MMD device address1Fh, bit [1] Software Reset 1 = Reset chip, except all registers0 = Disable resetReserved ReservedTable 3. Direct-access Register Differences between KSZ9021RN and KSZ9031RNXIndirect-access RegistersThe indirect register mapping and read/write access are completely different for the KSZ9021RN (uses Extended Registers) and KSZ9031RNX (uses MMD Registers). Refer to respective devices’ data sheets for details.Indirect registers provide access to the following commonly used functions:•1000Base-T link-up time control (KSZ9031RNX only)• Pin strapping status• Pin strapping override•Skew adjustments for RGMII clocks, control signals, and datao Resolution of skew steps are different between KSZ9021RN and KSZ9031RNX•Energy-Detect Power-Down Mode enable/disable (KSZ9031RNX only)•Energy Efficient Ethernet function (KSZ9031RNX only)•Wake-on-LAN function (KSZ9031RNX only)Revision HistoryRevision Date Summary of ChangesMigration Guide created1.0 12/7/121.1 6/7/13 Indicate PME_N1 (pin 17) for KSZ9031RNX is not an open-drain.Indicate INT_N (pin 38) is an open-drain for KSZ9021RN, but is not an open-drain for KSZ9031RNX.Indicate direct-access register 1Fh, bit [1] difference.。
LPW5209-01 2.1A 电源开关 IC 产品说明书
2.1A Power Switch with Programmable Current LimitGeneral DescriptionThe LPW5209 is an integrated power switch for self-powered and bus-powered Universal Series Bus (USB) applications. A built-in charge pump is used to drive the N-Channel MOSFET that is free of parasitic body diode to eliminate any reversed current flow across the switch when it is powered off. Its low quiescent current (30μA) and small package (SOT23-5) is particularly suitable in battery-powered portable equipment.Several protection functions include soft start to limit inrush current during plug-in, current limiting at 2.1A to meet USB power requirement, and thermal shutdown to protect damage under over current conditions.Order InformationApplications✧Power Switch✧USB Device✧Battery Charger Circuits Features◆80mΩLow R DS(ON), High-side N-MOSFET ◆2100mA Programmable current limit◆ 2.5V to 6V Input Voltage◆Low Quiescent Current:30μA◆Soft Start Function◆Built-In Short-Circuit Protection◆Built-in Thermal Protection◆RoHS Compliant and 100% Lead (Pb)-Free Typical Application CircuitMarking InformationVINFunctional Pin DescriptionPin DescriptionDescriptionLPW5209A LPW5209-21/11/061 1 Output to system pin.2 2 Ground.3 Connect a resistor to GND for setting current limit.Function Block DiagramAbsolute Maximum Ratings Note 1✧Input Voltage to GND ----------------------------------------------------------------------------------------------------- 7V ✧Output Voltage to GND -------------------------------------------------------------------------------------------------- 7V ✧Other pin to GND ---------------------------------------------------------------------------------------------------------- 6V ✧Maximum Junction Temperature --------------------------------------------------------------------------------- 150°C ✧Operating Ambient Temperature Range (T A) -------------------------------------------------------- -40℃ to 85°C ✧Maximum Soldering Temperature (at leads, 10 sec) ------------------------------------------------------- 260°C Note 1. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.Thermal Information✧Maximum Power Dissipation (SOT23-5, P D, T A=25°C)----------------------------------------------------- 0.45W ✧Thermal Resistance (SOT23-5, θJA) ------------------------------------------------------------------------- 250℃/WESD Susceptibility✧HBM(Human Body Mode) --------------------------------------------------------------------------------------------- 2KV ✧MM(Machine Mode) --------------------------------------------------------------------------------------------------- 200VElectrical Characteristics(Over recommended operating conditions unless specified otherwise, T =25℃)Enable Threshold LowEnable Threshold High 1.4Input High Current V IN=V EN=5.0V 5Typical Operating CharacteristicsApplication InformationThe LPW5209 are single N-Channel MOSFET high-side power switches with active-high enable input, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. The LPW5209 equipped with a charge pump circuitry to drive the internal NMOS switch; the switch's low RDS(ON), 80mΩ, meets USB voltage drop requirements.Input and OutputVIN (input) is the power source connection to the internal circuitry and the drain of the MOSFET. VOUT (output) is the source of the MOSFET. In a typical application, current flows through the switch from VIN to VOUT toward the load. If VOUT is greater than VIN, current will flow from VOUT to VIN since the MOSFET is bidirectional when on. Unlike a normal MOSFET, there is no a parasitic body diode between drain and source of the MOSFET, the LPW5209 prevents reverse current flow if VOUT being externally forced to a higher voltage than VIN when the output disabled (VEN < 0.4V). Chip Enable InputThe switch will be disabled when the EN pin is in a logic low condition. During this condition, the internal circuit is turned off, reducing the supply current to 0.1μA typical. The maximum guaranteed voltage for a logic low at the EN pin is 0.4V. A minimum guaranteed voltage of 1.4V at the EN pin will turn the LPW5209 back on. Floating the input may cause unpredictable operation. EN should not be allowed to go negative with respect to GND. The EN pin may be directly tied to VIN to keep the part on.Soft Start for Hot Plug-In ApplicationsIn order to eliminate the upstream voltage droop caused by the large inrush current during hot-plug events, the “soft-start” feature effectively isolates the power source from extremely large capacitive loads, satisfying the USB voltage droop requirements.Thermal ShutdownThermal shutdown is employed to protect the device from damage if the die temperature exceeds approximately 150°C. If enabled, the switch automatically restarts when the die temperature falls 20°C. The output will continue to cycle on and off until the device is disabled or the fault is removed.Packaging InformationSOT23-5。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
wide which resulted in lower outlet temperature. As a
result, this will causes condensation at the
Working pressure(0.6-0.95MPa) Generally you will have to pay extra design fee for higher pressure application.
当地政府要求使用环保冷媒
Local Government require us use environment refrigerant. (R134A,R407C,R410A……)
普通冷干机缺少多重保护:出现故障时,容易造成压缩机损坏。
Air dryers are generally without safety protection and as a result compressor fail easily.
普通冷干机的结构形式决定了设备体积笨重,不利于运输安装。
普通冷干机出口露点差,无法保证品质。
Air dryer outlet dew point is poor and produce poor air quality.
普通冷干机可靠性差:由于采用列管式翅片结构,决定了制冷系统需要焊接 的部位多且焊接要求高,制冷系统容易发生泄漏。
Unstable performance of air dryer and easily leakage of refrigerant.
downstream pipeline. This is not good for user environment and it will also causes the corrosion of the pipeline.
普通冷干机的标准工作压力(0.6-0.95MPa) 当压缩空气工作压力超过1.0MPa时,需单独设计额外增加费用。
How the heat exchanger works
outlet R134a
evaporator
air-air
demister
INLET AIR OUTLET AIR inlet R134a drain valve
separator
RS-SSD 食品级的设计标准
RS-SSD standard design for food market
Air dryer is bulky and it is not easy for transportation.
选择 RS-SSD 和RS-PD冷干机将会为您 解除以上所有的烦恼 !
Choose RS-SSD and RS-PD series refrigeration compressed air dryer to solve all the problems above.
AIR DRYERS
普通冷干机换热器壳体内层不耐腐蚀,对下 游空气品质产生二次污染。
Normal heat exchanger surface is easily corroded which will introduce contamination.
普通冷干机受结构和材质的影响,热交换效 率低,进出口温差大,以至于冷干机的空气 出口温度偏低,下游管路外表容易出现结露 现象。既影响生产环境,又容易造成下游管 路外表生锈腐蚀。
RS-SSD and RS-PD Series Dryer
2012 最新设计SSD 和RS-PD系列冷干机 环保Environmental Friendly 节能Energy-saving 稳定Stability
AIR DRYERS
选用冷干机时您还在为不能彻底解决 以下问题而烦恼吗?
When you choose air dryer, are you still worry if the air dryer can solve the problem as follow?
RS-SSD 系列冷干机冷媒全部采用R134A,符合全球各个地区的法规要求。
RS-SSD series air dryer uses R134A refrigerant which compliance with all countries regulation.
高效的换热器
High efficiency exchanger
SSD series air dryer is suitable for food manufacturing, medical ,chemical industry and semiconductor industry.
无氟环保工质
CFC-free environmentally friendly refrigerant
SSD系列冷干机的换热器、气液分离器、空气联 接管路和紧固件均采用304不锈钢制作。
Heat exchanger of SSD series air dryer,water separator and air pipe uses 304 stainless steel.
SSD 系列冷干机可直接服务于食品制造、医药卫 生、化工、半导体等特殊行业。
电源要求种类繁多
Different type of power supply: 240 V or 110 V , 50HZ or 60HZ
普通冷干机在高温工况下容易跳机,尤其是在我国南方地区的夏季和东南亚等地。
The air dryer trip easily due to the extreme conditions in the South of China and South East Asia
RS-SSD 系列冷干机进出口温差低(只有3~5度),出 口压缩空气相对湿度低,因此不会造成设备下游管路外 表结露和腐蚀现象。
RS-SSD series air dryer inlet and outlet air temperature difference is lower (Only 3-5℃).Outlet compressed air relative humidity is low