包装机毕业论文

摘要

当今社会，科学发展相当快速，人们越来越重视产品的包装。我们都知道，产品的包装可以让我们更感兴趣，也可以起到一定的保护作用。我要设计的毕业论文的题目是“四边封条袋包装机的设计”。

此四边封包装机是由物放卷机构，料供送机构，打字辊机构，纵横封热封辊机构，横切机构，纵切机构，输送机构，传动机构，控制机构等组成的。当机器作业的时把要包装的东西装到料斗里，然后包材从放卷机构上会引入热封辊，再到打字辊，再到纵切机构，再到冲裁机构，启动机器，对包材纵封，然后底边横封，同时，料斗的升降机构带动分料斗，然后下降给料，给料结束之后，分料斗抬升，然后，热封辊横封，与此同时，纵切由纵切机构来完成，横切由冲裁机构来完成。输送由输送带来完成。

四边封条袋包装机的设计方案为：立式是它的总体布局；它是连续式的作业；它的制袋方式是截取式和对合式。四边封条袋包装机结构简单，可操作性强，适合各个年龄段的人使用，它主要是用来包装粉末状，颗粒状等物品，可以一次包装多袋。根据不同的产品，上料机构可以不同。

我对此产品的设计，主要是设计冲裁机构，物料传送机构和热封辊的磨具设计，与此同时，我还会考虑人因工程学等一些因素。

关键词：输送机构；放卷机构；人因工程学；横切机构；打字辊机构

Abstract

With the rapid development of science and technology in modern days, packaging industry is receiving increasing attention. The appearance of the goods plays a protective effect on the goods. A good packaging interests consumers to stimulate consumpt ion. The article of my design is "the design of four-seal bag packaging machine."

This design's basic design plan is: The sack is taked shape on machine; The entire distribution is vertical; Continuous-type work; The system bag is used suitably ,the interception type on the machine. The packaging machine may carry on many bag of materials the packing, mainly uses for the packing the capsule, the powder, the pellet shape materials, its volume is exquisite, the operation is simple, controllable, pleasant is high. The machine may act according to the packing material the different shape replacement uses different delivery institution.

The packing machine is mainly used to pack soft capsules, powder, granular forms of materials. The main use of the machine is to drive sprocket and pack materials according to different forms of the material to switch to a different agency at the same time. I designed installing capacity of four packets of materials for delivery by agencies, institutions of putting volume, and vertical and horizontal roll closure sealing body type roller bodies, longitudinal section of agencies, cross-cutting bodies (blanking), the transportation agencies, control agencies, several transmission parts.

Its working process is packing into the material hopper, the package material followed by the introduction of volume institutions sealing roller, roller type, longitudinal section of agencies and blanking agencies, running machine, bag sealing material for vertical and bottom sealing, hopper lift sub-sector-led decline in feed hopper, hopper feeds sub-raising completely to carry out cross-roller sealing closure at the same time, longitudinal section of longitudinal section of body bags, punching bags for institutions serrated cross-section. It use packaging bags for delivery to complete packaging.

The result of the designing is in conjunction with engineering and ergnomics. it focuses on the delivery of their bodies , stamping and die sealing body-roll design.