《小型光电传感器CX》word版

合集下载

光电开关传感器说明书

上海三左电子科技有限公司 021-51021861
光电开关传感器光电漫反型模拟量传感器
特点： 1 长距离检测，高精度检测 2 可检测小物体 3 不受被检物的形状、颜色和材质影响 4 适用恶劣工作环境
回归反射型光电传感器回归反射型光电传感器是把发射器和接收器装入同一个装置内，在其前方装一块反光板，利用反射原理完成光电
控制作用的光电传感器。正常情况下，发射器发出的光被反光板反射回来被接收器收到；一旦光路被检测物挡住，接收器检测的光信号有变化，光电传感器就动作，输出一个开关控制信号。
特点： 1 安装使用时便于光路对齐 2 相对于对射式光电传感器，节省安装使用空间 3 安装接线简便 4 不受被检物的形状、颜色和材质影响
上海三左电子科技有限公司 021-51021861
光电开关传感器光电漫反型模拟量传感器
应用实例
光电式传感器主要利用光电效应检测物体。在环境条件比较好、无粉尘污染的场合，可采用光电式传感器。光电式传感器有检测距离远，对被检测物无影响的特性，广泛用于电子行业、食品饮料行业、包装物流行业等。
检测集成电路块
规格表中的检测距离是在检测目标为100*100mm、200*200mm、300*300mm的白色无光泽纸的条件下测得。
对射型将发射器和接收器面对面安装，并连接电源。调节发射器和接收器的上下左右位置,使中心对正，使指示灯状态变化。可靠安装两者后并校对使其检测到目标。
发射器
回归反射型（包括偏振反射型）将传感器和反光板镜面对面安装后，连接电源。调节反射面的上下左右位置，传感器的指示灯状态变化。可靠安装两者后并校对并使其检测到目标。
光电开关传感器
光电漫反型模拟量传感器
基础性概念
光电传感器概念

RightSight 微型光电传感器指南说明书

Installation InstructionsOriginal InstructionsRightSight Miniature SensorsCatalog Numbers 42EF-D2JBAK-A2, 42EF-D2JBAK-F4, 42EF-D2KBAK-A2, 42EF-D2KBAK-F4, 42EF-D2MPAK-A2, 42EF-D2MPAK-F4,42EF-D2MPAK-Y4, 42EF-P2JBB-A2, 42EF-P2JBB-F4, 42EF-P2KBB-A2, 42EF-P2KBB-F4, 42EF-P2MPB-A2, 42EF-P2MPB-F4, 42EF-P2MPB-Y4, 42EF-R2JBB-F4, 42EF-R2JBBT-A2, 42EF-R2JBBT-F4, 42EF-R2KBB-A2, 42EF-R2KBB-F4, 42EF-R2KBB-Z31, 42EF-R2KBBT-A2, 42EF-R2KBBT-F4, 42EF-R2MEB-F4, 42EF-R2MNB-A2, 42EF-R2MNB-F4, 42EF-R2MNB-Y4, 42EF-R2MNBT-A2, 42EF-R2MNBT-F4, 42EF-R2MPB-A2, 42EF-R2MPB-A5, 42EF-R2MPB-A6, 42EF-R2MPB-F4, 42EF-R2MPB-Y4, 42EF-R2MPBT-A2, 42EF-R2MPBT-A5, 42EF-R2MPBT-F4, 42EF-R2MPBT-Y4, 42EF-S1JBA-A2, 42EF-S1JBA-F4, 42EF-S1KBA-A2, 42EF-S1KBA-F4, 42EF-S1MEA-F4, 42EF-S1MNA-A2, 42EF-S1MNA-F4, 42EF-S1MNA-Y4, 42EF-S1MPA-A2, 42EF-S1MPA-F4, 42EF-S1MPA-Y4DescriptionThe 42EF RightSight™ family of photoelectric sensors offers high-performance general-purpose sensing in a compact, flexible package. They are designed for applications where simplified installation and maintenance are required. RightSight sensors provide a range of mounting options. The sensors can be through-hole mounted against a surface or can be installed using the threaded 18mm base or nose mounting options.Designed to withstand the rigors of food processing and material handlingenvironments, the 42EF RightSight standard models can withstand repeated 1200 psi and IP69K high-pressure washdowns.Features•Compact right angle housing with universal 18 mm threaded nose and base mounting options•Fixed, teachable, and adjustable sensitivity models•360° highly visible (status indicators helps operators verify proper operation regardless of sensor installation location)•Visible status indicator light-source for ease of alignment•Alignment aid helps achieve excellent reliability operating margin •Dual (NPN and PNP), NPN or PNP only models •Linear sensitivity adjustment•IP67 with 1200 psi; IP69K rated enclosure•IO-Link 1.1 Communication protocol that is offered in all standard modesStatus IndicatorTable 1 and Table 2 provide indicator status in the RUN mode, during operation. The sensor is always in run mode except when being taught.See for additional details about the operation of the 42EF RightSight in IO-Link mode.Sensor User InterfaceThe green status indicator can also serve as a set-up alignment aid that indicates that a margin of 1.5 has been reached. The sensor is receiving at least 1.5 times the signal strength back from the target that is required to trigger an output signal. In general, it is desirable to have a higher margin to help overcome any deteriorating environmental conditions, that is, dust build-up on the sensor lens. When aligning the sensor, the optimum performance can be obtained if this margin indicator is illuminated with the target in place. When aligning diffuse mode sensors, be sure that the sensitivity is set at its maximum setting; use the single-turn adjustment knob on the front panel. Pan the sensor left, right, up, and down to center the beam on the target. Decrease this setting to help prevent the sensor from detecting a background object. If this problem persists, the application requires the use of a background suppression, sharp cutoff diffuse, or retroreflective sensing mode.IMPORTANTSAVE THESE INSTRUCTIONS FOR FUTURE USE.IndicatorIndicatorTable 1 - Standard I/O (Auto PNP/NPN) Operating Mode IndicationColorStatus Description GreenOFF Power is off ON Power is onFlashing (6 hz)Unstable light: 0.8 X < margin < 1.5 X Flashing (1.4 hz)Output short circuit protection activeOrangeOFF Output de-energized ON Output energizedTable 2 - IO-Link Operation Mode IndicationColor Status Description GreenOFF Power is off Flashing (1 Hz)Power is onOrangeOFF Output de-energized ON Output energized2Rockwell Automation Publication 42EF-IN008B-EN-P - August 2020RightSight Miniature Sensors Installation InstructionsWiring DiagramsThe quick-disconnect connector is shown in the following diagrams. The pin numbers correspond to male connectors on the sensor.Figure 1 - Micro (M12) Male QD on Pigtail and Integral Pico (M8) Male QDOutput WiringFigure 2 - Light Operate PNP and NPN Models(42EF-D2JBAK-x , 42EF-P2JBB-x , 42EF-R2JBB-x , 42EF-S1JBB-x ) (a)Figure 3 - Dark Operate PNP and NPN Models(42EF-D2KBAK-x , 42EF-P2KBB-x , 42EF-R2KBB-x , 42EF-S1KBB-x ) (a)Figure 4 - PNP Complementary Models(42EF-D2MPAK-x , 42EF-P2MPB-x , 42EF-R2MPB-x , 42EF-S1MPB-x ) (a)Figure 5 - NPN Complementary Models(42EF-D2MNAK-x , 42EF-P2MNB-x , 42EF-R2MNB-x , 42EF-S1MNB-x ) (a)The IO-Link output pin 4 (black) does not support the connection of multiple sensors in series (for example, one sensor powering the next sensor). Theconnection of multiple sensors in series can be achieved when using pin 2 (white) outputs or by ordering a non-IO-Link catalog number. See theRockwell Automation® Knowledgebase or contact your local distributor for specific ordering information. For additional information about sensor operation in IO-Link mode, see publication 42EF-UM001.Approximate Dimensions [mm (in.)]Typical Response CurvesFigure 6 - Visible Red Polarized Retroreflective— 3.0 m Margin CurveFigure 7 - Visible Red Diffuse—500 mm Margin Curve(a)Replace the x in the catalog number with a suffix from Table 3.Table 3 - Connection TypesDescription Cat. No. Suffix2 m (6.6 ft) cable-A24-pin DC micro (M12) QD on 150 mm (6 in.) pigtail -F44-pin DC pico (M8) QD on 150 mm (6 in.) pigtail-Y412321M12 MaleM8 Male+V-VBlue (3)Black (4)White (2)Brown (1)PNP light operate or IO-Link NPN light operate or disabled (IO-Link operation default)+V-VBlue (3)Black (4)White (2)Brown (1)PNP dark operate or IO-Link NPN dark operate or disabled (IO-Link operation default)+V-VBlue (3)Black (4)White (2)Brown (1)PNP light operate or IO-Link PNP dark operate or disabled (IO-Link operation default)+V-VBlue (3)Black (4)White (2)Brown (1)NPN light operate or IO-LinkNPN dark operate or disabled (IO-Link operation default)Sensitivity Adjustment (diffuse and glass fiber-110100Distance to Reflector (mm)O p e r a t i n g M a r g i n0.110100011010001001100Distance (mm)M a r g i n (X )Rockwell Automation Publication 42EF-IN008B-EN-P - August 20203RightSight Miniature Sensors Installation InstructionsFigure 8 - Infrared Sharp Cutoff - 130 mm Margin CurveFigure 9 - Visible Red Polarized Retroreflective—3.0 m Beam PatternFigure 10 - Visible Red Diffuse—500 mm Beam PatternFigure 11 - Infrared Sharp Cutoff - 130 mm Beam PatternFigure 12 - Transmitted Beam Receiver—8 m Beam PatternFigure 13 - Transmitted Beam Receiver—Margin CurvesFigure 14 - Transmitted Beam Receiver—20 m Beam PatternAccessories1.010.0100.02.5425.4254Distance (m)O p e r a t i n g M a r g i nDistance (m)B e a m D i a m e t e r (m m )-535-11-3Distance to Target (mm)B e a m D i a m e t e r (m m )-8-6-4-20246812010080604020Distance to Target (mm)B e a m D i a m e t e r (m m )DescriptionCat. No.4-pin DC micro, 2 m (6.5 ft) cordset 889D-F4AC-2Swivel/tilt bracket (see Figure 16)60-2649Straight bracket60-2656Right angle bracket (see Figure 15)60-2657Mounting kit 60-2716Clamp style bracket 871A-BP18Flush mount adaptor60-25904-pin DC micro field-mount terminal chamber871A-TS4-DM 1.25 in. diameter reflector 92-473 in. diameter reflector92-39-0.2-0.15-0.1-0.0500.050.10.150.20.002.004.00 6.008.0010.00Distance (m)B e a m D i a m e t e r (m )1100100011010010Distance (m)O p e r a t i n g M a r g i n-0.5-0.4-0.3-0.2-0.100.10.20.30.40.50510152025Distance (m)B e a m D i a m e t e r (m m )Publication 42EF-IN008B-EN-P - August 2020 | Supersedes Publication 42EF-IN008A-EN-P - January 2016Copyright © 2020 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752, İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine UygundurAllen-Bradley, expanding human possibility, RightSight, and Rockwell Automation are trademarks of Rockwell Automation, Inc.Trademarks not belonging to Rockwell Automation are property of their respective companies.Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback .For technical support, visit rok.auto/support.PN-59564210001372107 Ver 01Waste Electrical and Electronic Equipment (WEEE)Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec .At the end of life, this equipment should be collected separately from any unsorted municipal waste.Figure 15 - Right Angle Bracket #60-2657Figure 16 - Swivel/Tilt Bracket #60-2649SpecificationsAttribute 42EF-*J*42EF-*K*42EF-*M*Certifications c-UL-us Listed and CE Marked for all applicable directives Vibration 10…55 Hz, 1 mm (0.04 in.) amplitude, meets or exceeds IEC 60947-5-2Shock 30 G with 1 ms pulse duration, meets or exceeds IEC 60947-5-2Relative humidity 5…95% (noncondensing)Ambient-light immunity •Incandescent light: 5000 lux •Sunlight: 20,000 lux User InterfaceStatus indicators •Green (power and margin)•Orange (output) Electrical Adjustments Fixed or adjustment knob by cat. no.Voltage10…30V DC, I-O link: 18…30V DC Current consumption 30 mA, maxSensor protection False pulse, reverse polarity, overload, short circuit Outputs Response time • 1 ms (diffuse, polarized retroreflective)• 4 ms (transmitted beam)Output type PNP and NPN PNP OR NPN(based on cat. no.)Load current 100 mA Leakage current, max •PNP: 0.1 mA •NPN: 0.3 mA Mechanical Housing material Mindel™Lens material Acrylic Cover material Udel™Supplied accessories 18 mm mounting nutEnvironmental Enclosure type rating NEMA 4X, 6P, IP67, IP69K; 1200 psi (8270 kPa) washdown Operating temperature -25…+70 °C (-13…+158 °F)Connection type•2 m (6.6 ft) cable•4-pin DC micro (M12) QD on 150 mm (5.9 in.) pigtail •4-pin DC pico (M8) QD on 150 mm (5.9 in.) pigtail。

光电传感器PPT

详细描述
图像传感器广泛应用于摄像机、数码相机、安防监控等领域，能够捕捉和记录图像信息，为人们提供视觉感知和数据记录的功能。
04
光电传感器的挑战与未来发展
提高灵敏度和精度
01
灵敏度和精度是光电传感器的重要性能指标，提高这两个指标有助于提高传感器对目标物体的检测能力和测量精度。
02
可以通过优化光电传感器的结构设计、改进制造工艺、采用高性能材料等方法来提高其灵敏度和精度。
05 结论
光电传感器的重要性和发展前景
光电传感器在自动化生产、智能家居、环境监测等领域具有广泛的应用，能够实现非接触、高精度、快速响应的测量和检测，对提高生产效率和产品质量具
有重要意义。
随着科技的不断进步，光电传感器技术也在不断发展，未来将会有更多的新型光电传感器出现，如红外传感器、光纤传感器等，其应用领域也将不断拓展。
详细描述
光电开关通过将光信号转换为电信号，实现物体的位置、速度、距离等参数的检测和控制。广泛应用于自动化生产线、机器人、安防系统等领域。
红外传感器
总结词
红外传感器是一种利用红外线进行检测的传感器，具有非接触、高精度和快速响应的特点。
详细描述
红外传感器能够检测物体的温度、辐射能量等参数，常用于温度测量、热成像、气体分析等领域。
光纤传感器
总结词
光纤传感器是一种利用光纤传输光信号进行检测的传感器，具有抗电磁干扰、耐腐蚀、高灵敏度的特点。
详细描述
光纤传感器能够检测物体的位移、压力、温度、折射率等参数，广泛应用于石油化工、航空航天、医疗等领域。
图像传感器
总结词
图像传感器是一种能够将光学图像转换为数字信号的传感器，具有高分辨率、低噪声、动态范围广的特点。

光电传感器分类简介课件

7
防护短时间浸水的影响
8
防护持续潜水影响
9
能有效防护高压水和蒸汽的侵入
IP防护等级由两个数字标记：例： IP 6 5
标记字符
接触和异物的侵入
水的侵入
漫反射型
反射板型
对射型
一般漫反射型
盲区
检测区
传感器的接受器收到发射器发出经目标物反射回的光，并达到开关动作阀值，传感器输出。
目标物
目标物
目标物
漫反射型：
反射板型：（对射型雷同）
亮通：输出OFF 暗通：输出ON
亮通：输出ON 暗通：输出OFF
亮通：输出ON 暗通：输出OFF
亮通：输出OFF 暗通：输出ON
亮通：接收器接受到发射器放出的光，输出动作暗通：接收器没有接受的发射器放出的光，输出动作
输出信号其他：继电器输出，模拟量输出串口（RS485），以太网
色标和颜色传感器
镜头
半反半透镜
发射器
接收器
色标传感器基本结构
色标传感器基本结构
色标和颜色传感器
色标传感器工作原理：以不同颜色物体的发射率差作为检测原理

色标和颜色传感器
传感器发发射紫光外（波长为375nm），荧光物质被紫外光激发，并反射波长在可见光光谱范围内的可见光，然后输出响应。
荧光传感器
背景遮蔽区
F: 背景接受器 N: 目标物接收器
前景遮蔽区
F N
F: 目标物接收器 N: 前景区接收器
F>> N 检测到目标物
前景遮蔽型
F N
F: 目标物接收器 N: 前景区接收器
前景遮蔽区
N >> F前景区物体被检测到无输出

微型自包含光电传感器的说明书

Instruction ManualMiniature Self-Contained Photoelectric Sensors in Universal Housing•Easily fits (or retrofits) almost any mounting situation•Exceptional optical performance, comparable to larger “MINI-style” or barrel sensors•10 V dc to 30 V dc operation, with complementary (SPDT) NPN or PNP outputs, depending on model•Bright LED operating status indicators are visible from 360°•Rugged sealed housing, protected circuitry•Models available with or without 18 mm threaded “nose”•Less than 1 millisecond output response for excellent sensing repeatability•Choose 2 m (6.5 ft) or 9 m (30 ft) cable or 150 mm (6 inch) Pico-style cabled QDWARNING: Not To Be Used for Personnel ProtectionNever use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use inpersonnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.Modelssuffix "W/30" to the cabled model number. For example, QS186E W/30.•To order the 4-pin M12/Euro-style integral quick disconnect model, add the suffix "Q8" to the model number. For example, QS186EQ8.•To order the 4-pin M8/Pico-style integral quick disconnect model, add the suffix "Q7" to the model number. For example, QS186EQ7.•To order the 150 mm (6 in) PVC cable model with a 4-pin M12/Euro-style quick disconnect, add the suffix "Q5" to the model number. For example, QS186EQ5.•To order the 150 mm (6 in) PVC cable model with a 4-pin M8/Pico-style quick disconnect, add the suffix "Q" to the model number. For example,QS186EQ.•Models with a quick disconnect require a mating cordset.WORLD-BEAM ® QS18 Series SensorOriginal Document 197052 Rev. D15 August 2018197052 - Tel: +1-763-544-3164P/N 197052 Rev. DWiring DiagramsQS18 with NPN Outputs–+QS18 with PNP Outputs–+QS18 Emitters–+Key1 = Brown2 = White3 = Blue4 = BlackQuick disconnect wiring diagrams are functionally identical.Installing FibersCutting Unterminated Plastic Fibers QS18V..6FPUnterminated plastic fibers are designed to be cut by the user to the length required for the application.To facilitate cutting, a Banner model PFC-1 cutting device is supplied with the fiber. Cut the fiberas follows:Figure 1. PFC-1 Cutting DeviceUse small ports for fiber sizes:•0.25 mm (0.01 inches)•0.5 mm (0.02 inches)Use large ports for fiber sizes:•0.75 mm (0.03 inches)• 1.0 mm (0.04 inches)• 1.5 mm (0.06 inches)1.Locate the control end of the fiber (the unfinished end).2.Determine the length of fiber required for the application. If using a bifurcated fiber, separate the two halves of the fiber atleast 51 mm (2 inches) beyond the fiber cutting location.3.Lift the top (blade) of the cutter to open the cutting ports.4.Insert one of the control ends through one of the cutting ports on the cutter so that the excess fiber protrudes from theback of the cutter.5.Double-check the fiber length, and close the cutter until the fiber is cut.ing a different cutting port, cut the second control end to the required length.Note: To ensure a clean cut each time, do not use a cutting port more than once.7.Gently wipe the cut ends of the fiber with a clean, dry cloth to remove any contamination. Do not use solvents or abrasiveson any exposed optical fiber.Installing Plastic Fibers QS18V..6FPFollow these steps to install the plastic fibers.Adapter InstallationFigure 2. Installing Plastic FibersP/N 197052 Rev. D - Tel: +1-763-544-316431.Slide the fiber gripper up to unlock it (A).2.If using 0.25 mm or 0.5 mm core fibers, slide the plastic fiber adapters onto the fibers,flush with the fiber ends.3.Carefully insert the prepared plastic fiber ends into the ports (B) as far as possible without applying extra force.4.Slide the fiber gripper down to lock the fibers in place (C).Installing Glass Fibers QS18V..6FFollow these steps to install the glass fibers.1.Slide the supplied o-ring on the sensor end of the fibers, as shown.2.Press the fiber ends firmly into the ports located on the front of the sensor.3.Slide the supplied u-shaped retaining clip into the slot in the sensor’s barrel until the clip snaps into place. - Tel: +1-763-544-3164P/N 197052 Rev. DSpecificationsSupply Voltage10 V to 30 V dc (10% maximum ripple) at less than 25 mA, exclusive of load Protected against reverse polarity and transient voltages Light SourceGlass Fiber Optic, Opposed and Diffuse mode models: Infrared, 940 nm Plastic Fiber Optic, Retroreflective, Convergent models: Visible red, 660 nm Fixed-Field and DVS models: Visible red, 630 nm AdjustmentsGlass Fiber Optic, Plastic Fiber Optic, Convergent, Diffuse, andRetroreflective mode models (only): Single-turn sensitivity (Gain) adjustment potentiometer Indicators2 LED indicators on sensor top:Green solid: Power on Amber solid: Light sensedAmber flashing: Marginal excess gain (1 to 1.5 times excess gain)Required Overcurrent ProtectionWARNING: Electrical connections must bemade by qualified personnel in accordance with local and national electrical codes and regulations.Overcurrent protection is required to be provided by end product application per the supplied table.Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply.Supply wiring leads < 24 AWG shall not be spliced.For additional product support, go to .RepeatabilityOpposed Mode: 100 microsecondsDVS, DL and FF Modes: 90 microseconds All Other Modes: 150 microsecondsOutput ConfigurationSolid-state complementary (SPDT): NPN or PNP (current sinking or sourcing), depending on model;Rating: 100 mA maximum each output at 25 °CDVS, DL and FF Modes ON-state Saturation Voltage: less than 1.5 V at 10mA; less than 3 V at 100 mAAll Other Modes: ON-state Saturation Voltage: less than 1 V at 10 mA; less than 1.5 V at 100 mAProtected against false pulse on power-up and continuous overload or short circuit of outputs Output ResponseOpposed Mode: 750 microseconds ON; 375 microseconds OFF DVS, FF and DL Modes: 850 microseconds ON/OFF All Other Modes: 600 microseconds ON/OFFNote: 100 millisecond delay on power-up; outputs do not conduct during this time Construction ABS housing3 mm mounting hardware includedConnections2 m (6.5 ft) 4-wire PVC cable, 9 m (30 ft) 4-wire PVC cable, 4-pin Pico-style or Euro-style QD, 4-pin Pico-style or Euro-style 150 mm (6 in) QD,depending on model EnvironmentalIEC IP67; NEMA 6Operating ConditionsTemperature: –20 °C to +70 °C (–4 °F to +158 °F)95% at +50 °C maximum relative humidity (non-condensing)CertificationsNote: For performance specifications of the FF50 and FF100 models built prior to date code 17090, refer to document p/n 63908.DimensionsModel Suffix E, EV, R, and FF(0.12")(0.67")Model Suffix EB, RB3.0 mm (0.12")(0.82")Model Suffix DB, W3.0 mm (0.12")(0.82")P/N 197052 Rev. D - Tel: +1-763-544-31645Model Suffix FP††CV Models: 33.2 mm (1.31")Model Suffix CV15, CV45, D, DL, LV, LPModel Suffix F17.1 mm (0.67")(0.78")Model Suffix Q7Model Suffix Q8Model Suffix Q(e.g. QS186EQ)Model Suffix Q5(e.g. QS186EQ5)(e.g. QS186EQ7)(e.g. QS186EQ8)QDPico-Style QDEuro-Style QDM18 x 1 Jam NutM3 hardware packet contents:• 2 - M3 x 0.5 x 20 mm stainless steel screw • 2 - M3 x 0.5 stainless steel hex nut • 2 - M3 stainless steel washerPacking list:•Sensor•M18 x 1 jam nut •M3 hardware packet•Quick Start Guide, p/n 63687Performance Curves - Tel: +1-763-544-3164P/N 197052 Rev. DP/N 197052 Rev. D - Tel: +1-763-544-31647 - Tel: +1-763-544-3164P/N 197052 Rev. DAccessoriesWORLD-BEAM QS18 BracketsSMB18A•Right-angle mountingbracket with a curved slotfor versatile orientation•12-ga. stainless steel•18 mm sensor mountinghole•Clearance for M4 (#8)hardwareHole center spacing: A to B = 24.2Hole size: A = ø 4.6, B = 17.0 × 4.6, C = ø 18.5SMB312S•Stainless steel 2-axis,side-mount bracketA = 4.3 × 7.5,B = diam. 3,C = 3 ×15.3All measurements are in millimeters.P/N 197052 Rev. D - Tel: +1-763-544-31649Retroreflective TargetsGo to or see the Accessories section of your current Banner Engineering Corp catalog for complete information.Note: Polarized sensors require corner cube type retroreflective targets only.Plastic and Glass Fiber OpticsGo to or see the Accessories section of your current Banner Engineering Corp catalog for a list of plastic and glass fiber optic cables.Banner Engineering Corp. Limited WarrantyBanner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: .© Banner Engineering Corp. All rights reserved。

CX425小型光电传感器使用说明书

灵敏度调整
可检
检测
测
范物
围体
1.7m 不透明体、半透明体、透明体与检测轴垂直: 1
引用颜色/
请使用“-”型螺丝刀（请另外准备）缓慢微调灵敏度调节器。如果用力过大或旋转过度可能会被损坏。
入光时ON/非入光时ON 可通过转换开关选择
引用颜色/
工作状态指示灯备有连续可变调节器装备(可贴近安装2台传感器) IP67(IEC)、防浸形(JIS)
投
光
二
极
体
红外线LED(调制式) 外壳:PBT,透镜,聚碳酸酯指示罩:聚碳酸酯芯橡皮绝缘软电缆:
引用颜色引用颜色部件名称当工作转换开关按顺时针方向转到底l侧时则设定为入光时on状态
部件名称
稳定入光状态或稳定非入光状态时亮起
误动作
顺时针方向旋转时检测距离增加。

当工作转换开关按顺时针方向转到底(L侧)时，则设定为入光时 ON状态。当工作转换开关按逆时针方向转到底(D侧)时，则设定为非入光时ON状态。

OsiSense XUM小型光电传感器说明书

OsiSense® XUM Miniature Photoelectric SensorsHigh performancein a small packageOffering long sensing distances and resistance to interference and light sources>Easy to installContributes to machine compactnessWider adjustment range>EconomicalIncreases proﬁ tability>Readily availableContributes to machine performanceContentsMiniature diffuse, polarized retroreﬂ ective, thru-beam dedicated models and multimode photoelectric sensorsIntroduction p 2 and 3Three-wire, plastic dedicated models p 4 to 7Three-wire, metal dedicated models p 8 to 11Three-wire, plastic multimode p 12 and 13NOTE: Sensors described in this catalog are designed to be used for standard industrial presence sensingapplications. These sensors do not include the self-checking redundant circuitry necessary to allow fortheir use in safety applications.>Contributes to machine compactnessEasy to install:Compact product, the most commonly used standard size• Long sensing distances: up to 5 m (16.40 ft) retrore ﬂ ective, 15 m (49.21 ft) thru-beam, and 1 m (3.28 ft) diffuse • High insensitivity to light sources: withstands up to 40,000 lux natural light/10,000 lux incandescent light • Good resistance to severe environments: -30 to 60 °C (-22 to 140 °F) with IP67 degree of protection rating (IP69 K or IP67 G available)50%50% energy consumption: twice as many sensors can be placed on thesame power supply >Increases proﬁ tabilityEconomical and Simple:• NO/NC con ﬁ guration switch located on the bottom of the sensor for protection against accidental adjustment• Output LED on the front face of thru-beam sensors for easier alignment during installation >Selection guide XUM photoelectric sensors 3-wire DC Polarized Retrore ﬂ ective DiffuseM82 m cable 2 m cable 1 (3.28) 5 (16.40)M8 2 m cable Thru-Beam 15 (49.21) with adjustable sensitivitytransmitter + receiver 12–24 Vdc with protection against reverse polarityNO/NC con ﬁ gurable par switchIP65, IP67 * For multimode thru-beam applications, see page 12 for appropriate transmitter and receiver selection.100%availabilitythroughoutthe world >Contributes to machine performanceReadily available:• Robust products designed to meet your needs• Particularly well suited for machines used in the assembly and packaging sectors, the automotive industry, conveying, etc.Packaging Automotive Materials handling Multimode 0...10 (32.81)depending on mode3-wire DCwith adjustable sensitivity IP67, IP69 K, IP67 G 12–24 Vdc with protection against reverse polarity Fixed NO or NC, PNP or NPN XUM9BPANL2 XUM9BNANL22 m cable5 (16.40) with re ﬂ ector XUZC50Polarized Retrore ﬂ ective XUM9BPBNL2XUM9BNBNL22 m cable 15 (49.21)Thru-Beamtransmitter + receiverDiffuse 2 m cable 0.77 (2.53) XUM5BPANL2 XUM5BNANL2XUM5BPBNL2 XUM5BNBNL2System Supplym (ft) M8XUM5A p CNM8XUZ C08567XUZMSV pp XUZMSH pp XUZMU01Catalog Numbers OsiSense® Photoelectric sensorsOptimumMiniature design, plasticThree-wire DC solid-state outputNO/NC conﬁ guration switchXUZAM04524754XUZAM03524753Distance (m)Parallelmovement(cm)Vertical movementHorizontal movementParallelmovement(cm)XUZ C50Parallelmovement(cm)Distance (m) wiring diagramscurvesOptimumMiniature design, plasticThree-wire DC solid-state outputNO/NC conﬁ guration switchDiffuse system, polarized retroreﬂ ective system (mm)Pre-cabled version Connector versionDescription - XUM5A p CNL2, XUM9A p CNL2Dimensions - XUM5A p CNL2,XUM9A p CNL2Description - XUM5A p CNM8,XUM9A p CNM8Dimensions - XUM5A p CNM8,XUM9A p CNM8(1) Conﬁ guration switch(2) Output state LED(3) Stability and power-on LEDR: Reception, T: Transmission(1) Potentiometer(1) Conﬁ guration switch(2) Output state LED(3) Stability and power-on LEDR: Reception, T: Transmission(1) Potentiometer(4) Adjustment potentiometer(5) Power-on LEDT: Transmission(1) Potentiometer(1) Conﬁ guration switch(2) Output state LEDR: Reception(1) Output state LED on front face(4) Adjustment potentiometer(5) Power-on LEDT: Transmission(1) Potentiometer(1) Conﬁ guration switch(2) Output state LED(3) Stability and power-on LEDR: Reception(1) Output state LED on front faceNO/NC conﬁ guration switchNO/NC conﬁ guration switchXUZ C08XUM 2B2KCL2T XUM 2B pp NL2RXUZ AM81Catalog Numbers OsiSense ® Photoelectric sensorsApplicationMiniature design, metalThree-wire DC solid-state output(+) BN (Brown)OUT/Output BK (Black)P a r a l l e l m o v e m e n t (c m )Horizontal movementP a r a l l e l m o v e m e n t (c m )XUZ C50P a r a l l el m o v e m e n t (cm )Distance (m)Characteristics, schemes, curvesOsiSense ® Photoelectric sensorsApplicationMiniature design, metalThree-wire DC solid-state outputDiffuse system (mm)Description - XUM 5B pp NL2Dimensions - XUM 5B pp NL2(3) Adjustment potentiometer.R: Reception, T: Transmission.Polarized retroreﬂ ective system (mm)NL2Dimensions - XUM 9B pp NL2Description - XUM 9B ppDescription - XUM 2BKCNL2T Dimensions - XUM 2BKCNL2T Dimensions - XUM 2B pp NL2R(2) Stability and power-on LED.Accessories (mm)Reﬂ ectors Mounting bracket XUZ C08XUZ C50XUZ AM81(1) 2 x M3(1) Elongated holes 4.5 x 8OsiSense ® Photoelectric sensorsMulti-modeMiniature designThree-wire DC supply, solid-state outputXUM0APSAL5.Dimensions (mm)XUM0A ppp L2XUM0A ppp M8Elbowed connector501543_1501542_1XUM0A ppp M8XUM0A ppp L2XUZC50XUZ M2003XUZ2001XUZ 2003XUZ A50Catalog Numbers,dimensionsOsiSense ® Photoelectric sensorsMulti-modeMiniature designThree-wire DC solid-state output1 (+)4 OUT/Output 2 beam break input (1)(+) BN (Brown)OUT/Output BK (Black)Beam break input VI (Violet) (1)2/VI input:- not connected: beam madeﬂ ection coef ﬁ cientSpeci ﬁ cations, wiring diagrams,curves(1) Beam break input on thru-beam transmitter only.The information and dimensions in this catalog are provided for the convenience of our customers. While this information is believed to be accurate, Schneider Electric reserves the right to makeupdates and changes without prior notiﬁ cation and assumes no liability for any errors or omissions. Design: Schneider ElectricPhotos: Schneider Electric© 2010 Schneider Electric. All Rights Reserved.April 20109 0 0 6 C T 1 0 0 3Schneider Electric USA, Schneider Electric SensorCompetency Center1875 Founders DriveDayton OH 45420(800) 435-2121。

松下放大器内置小型光电传感器CX-44 使用说明书

非常感谢您购买Panasonic 产品。

请仔细、完整地阅读此使用说明书以便正确、合理地使用此产品。

请把此使用说明书放在随手可得之处以便快速查找。

●详细内容(操作方法和规格等)请参阅“松下电工(中国)的网站 (/id/pidsx/global)”。

●检索步骤为“下载” → “手册”→ “产品型号”。

●无法看本公司网站时，请咨询最近的营业网点。

1CE 标记的对象产品●对象产品请参阅“本公司网站(/id/pidsx/global )”。

2各部分的名称3安装●紧固扭矩应在0.5N·m 以下。

4连接图(注1)：检测模式转换输入。

请将选择模式(粉红色/2)线与0V(蓝色)线或＋V(茶色)线接通，选择检测模式(BGS/FGS功能)。

功能连接用途BGS 功能接至0V (实线)检测物体与背景分离。

FGS 功能接至＋V (虚线)检测物体靠近背景。

不检测时ON 的条件下使用输出动作。

●PNP 输出型±10%●NPN 输出型±10%5距离设定步骤1. 将距离设定调节器转到底。

BGS 功能：逆时针 FGS 功能：时针2. BGS 功能：放置检测物体后，旋转调节器，确认处在检测状态的位置A点。

FGS 功能：在检测背景状态下，旋转调节器，确认处在非检测状态的位置A 点。

3. BGS 功能：移除检测物体，旋转调节器，确认处在非检测状态的位置B 点。

FGS 功能：将检测物体置于检测位置后，旋转调节器，确认处在检测状态的位置B 点。

旋转位置将变为B 点。

4. A 、B 点的中间点附近即为稳定检测物体的最佳位置。

6注意事项●本产品是以工业环境使用为目的所开发、制造的产品。

●请确认在电源关闭状态下进行接线。

●注意错误接线可能损坏传感器。

●请确认电源电压在额定范围内变化。

●如果电源由一商用开关调节器提供，请确保电源机架接地端子(F.G .)接地。

●如果在该产品附近使用产生噪音的设备，如开关调节器或转换发动机等，请将设备机架接地端子(F.G.)接地。

光电传感器详细ppt课件

二、光电倍增管及其基本特性
1. 结构和工作原理
➢ 光照很弱时，光电管产生的电流很小，为提高灵敏度常常使用光电倍增管。如核仪器中闪烁探测器都使用的是光电倍增管做光电转换元件。 ➢ 光电倍增管是利用二次电子释放效应，高速电子撞击固体表面，发出二次电子，将光电流在管内进行放大。
效应和光生伏特效应两类。（1）光电导效应
在光线作用，电子吸收光子能量从键合状态过渡到自由状态，而引起材料电导率的变化，这种现象被称为光电导效应。基于这种效应的光电器件有光敏电阻。
hhc1.24Eg
寒假来临，不少的高中毕业生和大学在校生都选择去打工。准备过一个充实而有意义的寒假。但是，目前社会上寒假招工的陷阱很多
寒假来临，不少的高中毕业生和大学在校生都选择去打工。准备过一个充实而有意义的寒假。但是，目前社会上寒假招工的陷阱很多
（2）光电管的光照特性
通常指当光电管的阳极和阴极之间所加电压一
定时，光通量与光电流之间的关系为光电管的光照特
性。其特性曲线如图所示。曲线1表示氧铯阴极光电
1、外光电效应
在光线的作用下，物体内的电子逸出物体表面向外发射的现象称为外光电效应。向外发射的电子叫做光电子。基于外光电效应的光电器件有光电管、光电倍增管等。
光子是具有能量的粒子，每个光子的能量：
E=hν
h—普朗克常数，6.626×10-34J·s；ν—光的频率（s-1）
寒假来临，不少的高中毕业生和大学在校生都选择去打工。准备过一个充实而有意义的寒假。但是，目前社会上寒假招工的陷阱很多
ν的单位为Hz，λ的单位为cm。
寒假来临，不少的高中毕业生和大学在校生都选择去打工。准备过一个充实而有意义的寒假。但是，目前社会上寒假招工的陷阱很多

OMRON 微型光电传感器说明书

943
OMRON 微型光电传感器
/omronia
OMRON 可传送非放大光微传感器包括接线抑制
OMRON 可传送槽型非放大光微传感器
•0.5mm (0.02 in.) 光圈的高分辨率传感•包括过孔、表面贴装和引线型的多种封装
•输出型号包括晶体管只，光达林顿，以及施密特触发器•红外LE D 和光电晶体管确保长时间使用寿命和高可靠性
•非接触传感，适合办公室自动化、钱币处理、游戏和计算机外设设备
光电晶体管：•小到4mm x 5mm 的小型化传送封装•可提供表面贴装、过孔和引线型号•
可提供集成连接器型式
光电集成电路：
•施密特触发器输出•光开启或暗开启的输出•可提供集成连接器型式
•
从1 到5mm 的反射传感距离范围
shanghai@。

VisiSight 微型光电传感器用户指南说明书

Technical DataOriginal InstructionsVisiSight Miniature Photoelectric SensorsCatalog Numbers 42JS-P2MNB1-F4, 42JS-P2MPB1-F4, 42JS-P2MNA2-F4, 42JS-P2MPA2-F4, 42JT-P2LAT1-P4, 42JT-P8LAT1-P4, 42JT-C2LAT1-P4, 42JS-D2MNA2-F4, 42JS-D2MPA2-F4, 42JS-D2MNA1-F4, 42JS-D2MPA1-F4, 42JT-D2LAT1-P4, 42JT-D8LAT1-P4, 42JS-B2MNB1-F4, 42JS-B2MPB1-F4, 42JS-B2MNB2-F4, 42JS-B2MPB2-F4, 42JT-B2LAT1-P4, 42JT-B2LAT2-P4, 42JT-B8LAT1-P4, 42JT-F5LET1-P4, 42JS-E2EZB1-F4, 42JS-R9MNA1-F4, 42JS-R9MPA1-F4, 42JS-E1EZB1-F4, 42JS-R9MNA2-F4, 42JS-R9MPA2-F4, 42JT-E2EZB1-P4, 42JT-R9LAT1-P4, 42JT-E8EZB1-P4, 42JT-R8LAT1-P4Topic PageSummary of Changes242JS VisiSight Sensor3Features3Available Models3Optical Response Time Characteristics3Specifications3Product Selection4User Interface4Wiring Diagrams5Approximate Dimensions5Typical Response Curves542JT VisiSight Sensor7Features7Available Models7Optical Response Time Characteristics7Specifications7Product Selection8User Interface9Wiring Diagrams942JT Push Button Lock/Unlock942JT Remote Teach9Approximate Dimensions9Typical Response Curves10Accessories12VisiSight Miniature Photoelectric Sensors Technical DataSummary of ChangesThis publication contains the following new or updated information. This list includes substantive updates only and is not intended to reflect all changes.Topic PageAdd UKCA Marked certification to Specifications tables 3 and 7Updated sensing distance for 42JT-B2LAT2-P482Rockwell Automation Publication 42JSJT-TD001B-EN-P - August 2023Rockwell Automation Publication 42JSJT-TD001B-EN-P - August 2023342JS VisiSight SensorFeatures42JS VisiSight™ sensors include the following features:•Visible red light-emitting diode (LED) for ease of alignment•Complementary light and dark operate outputs•Linear sensitivity adjustment knob or no adjustment models •Optional snap-on adaptor enables 18 mm mount and facilitates easy sensor replacement •I P67 rated enclosureAvailable Models•Polarized retroreflective •Standard diffuse•Fixed background suppression •Transmitted beamSpecificationsOptical Response Time Characteristics42JS 42JSAdapterAttribute 42JS VisiSight SensorCertifications cULus Listed, CE Marked for all applicable directives, and UKCA Marked for all applicable regulationsShock 30 g with 1 ms pulse duration, meets or exceeds IEC 60947-5-2Vibration 10…55 Hz, 1 mm (0.04 in.) amplitude, meets or exceeds IEC 60947-5-2Environmental Enclosure type rating IP67Operating temperature -20…+60 °C (-4…+140 °F)Relative humidity 5…95% (noncondensing)Ambient light immunity Incandescent light 5000 lux User Interface Status Indicator See User Interface on page 4Sensitivity adjustment No adjustment or adjustment knob by cat. no.Electrical Operating voltage 10…30V DC Current consumption 25 mA maxProtection type Short circuit, reverse polarity, false pulse, overload Outputs Output type See Product Selection on page 4.Output function Complementary light and dark operate Load current 100 mA max Mechanical Material •Housing: Plastic — ABS•Lens: Plastic — PMMA Connection typeSee Product Selection on page 4.Attribute [mm (in.)]Polarized RetroreflectiveDiffuse Background Suppression Transmitted BeamField of view 2.8°5.5° for 250 (9.8)4° for 800 (31.5)14° for 55 (2.16)17° for 130 (5.12)4°Spot size (1)(1)For more information on spot size, see Typical Response Curves on page 5.175 (6.89) @ 3.5 m (11.5 ft)40 (1.57) @ 250 (9.8)60 (2.36) @ 800 (31.5)7.6 (0.3) @ 55 (2.16)11.5 (0.45) @ 130 (5.12)700 (27.56) @ 10 m (32.8 ft)Light source Visible redVisible red and infraredResponse time1 ms4Rockwell Automation Publication 42JSJT-TD001B-EN-P - August 202342JS VisiSight SensorProduct SelectionUser Interfaceconnection (for example, 42JS-P2MPB1-A2), or -Y4 for a 4-pin DC pico (M8) QD connection on a 150 mm (6 in.) pigtail (for example, 42JS-P2MPB1-Y4).(2)Sensing distance with 92-124 reflector.Table 1 - Sensor IndicatorsRockwell Automation Publication 42JSJT-TD001B-EN-P - August 2023542JS VisiSight SensorWiring Diagrams(1)For normal operation, black wire (pin 4) needs no connection. To disable the lightsource, connect the black wire (pin 4) to +V.Approximate DimensionsTypical Response Curves+––Transmitted beam emitter+–PNP models withcomplementary outputsNPN models withcomplementary outputsM8PlugM12 Plug(1)M18X-40-30-20-10010203040B e a m D i a m e t e r (m m )(3.9)(7.87)(11.8)(15.7)(27.5)(31.5)(19.6)(23.6)(35.4)Distance [mm (in.)]Standard Diffuse—Beam Patternwithout 18 mm snoutwith 18 mm snout Distance [mm (in.)](0.39)(3.9)(39.4)1101001000O p e r a t i n g M a r g i nStandard Diffuse6Rockwell Automation Publication 42JSJT-TD001B-EN-P - August 202342JS VisiSight SensorBackground Suppression (55 mm)—Beam PatternDistance [mm (in.)](0.39)(0.78)(1.18)(1.57)(1.96)(2.36)B e a m D i a m e t e r (m m )-5-4-3-2-1023451Background Suppression (130 mm)—Beam PatternDistance [mm (in.)](0.79)(1.57)(3.15)(3.93)(4.72)(2.36)(5.51)B e a m D i a m e t e r (m m )-6-4-8-2-100210468Background Suppression (55 mm)Distance [mm (in.)](0.004)(0.04)(0.39)(3.9)O p e r a t i n g M a r g i n110100100001000Background Suppression (130 mm)Distance [mm (in.)](0.004)(0.04)(0.39)(3.9)(39.3)O p e r a t i n g M a r g i n1101001000010000-80-60-40-2020406080100B e a m d i a m e t e r [m m ](1.3)(2.6)(39.4)(5.2)(9.2)(10.4)(6.6)(7.9)(11.8)Distance [m (ft)]Polarized Retroreﬂective—Beam PatternPolarized Retroreﬂective110100O p e r a t i n g M a r g i n(0.33)(3.28)(32.8)(0.03)Distance [m (ft)]0-250-200-150-100-5050100150200250B e a m D i a m e t e r [m m ](6.56)(13.1)(19.7)(26.2)(32.8)Distance [m (ft)]Transmitted Beam—Beam PatternTransmitted Beam—Visible Red and Infrared1101001000O p e r a t i n g M a r g i n(0.33)(3.28)(32.8)(328)Distance [m (ft)]Rockwell Automation Publication 42JSJT-TD001B-EN-P - August 2023742JT VisiSight SensorFeatures42JT VisiSight™ sensors include the following features:•Class 1 eye-safe red laser beam (for small object and contrast detection) and visible light-emitting diode (LED) models•Unique auto PNP/NPN output reduces stocking cost and simplifies selection, installation, and maintenance •Teach push button for sensitivity and L.O./D.O. selection •IP69K enclosure rating and ECOLAB tested to withstand food industry cleaning chemicals•Laser etched markings for durabilityAvailable Models•Polarized retroreflective •Standard diffuse•Adjustable background suppression •Transmitted beam •Clear object •Color markSpecificationsOptical Response Time CharacteristicsAttribute 42JT VisiSight SensorCertifications cULus Listed, CE Marked for all applicable directives, and UKCA Marked for all applicable regulations Shock 30 g with 1 ms pulse duration, meets or exceeds IEC 60947-5-2Vibration 10…55 Hz, 1 mm (0.04 in.) amplitude, meets or exceeds IEC 60947-5-2Environmental Enclosure type rating IP67 and IP69K Operating temperature -20…+60 °C (-4…+140 °F)Relative humidity 5…95% (noncondensing)Ambient light immunity Incandescent light 5000 lux User Interface Status indicators See User Interface on page 9Sensitivity adjustment Teach button Electrical Operating voltage 10…30V DC Current consumption 30 mA maxProtection type Short circuit, reverse polarity, false pulse, overload Outputs Output type See Product Selection on page 8.Output function Teachable light or dark operate Load current 100 mA max Mechanical Material •Housing: Plastic — ABS •Lens: Plastic — PMMA Connection typeSee Product Selection on page 8.Attribute[mm (in.)]Polarized Retroreflective Clear Object Detection DiffuseBackgroundSuppressionColor Mark Transmitted Beam Visible Red 660 nm (except for Color Mark Models)Spot size (1)(1)For more information on spot size, refer to Figure on page 10.500 (19.7) @6 m (236.22 ft)40 (1.57) @ 1 m (3.28 ft)70 (2.75) @ 800 (31.5)15 (0.59) @ 180 (7.09)27 (1.06) @ 400 (15.75)1 x 4 (0.16) @ 12 (0.47)(white LED) 1.1 m (3.61 ft) @13 m (42.65 ft)Response time 0.5 ms 0.5 ms 0.5 ms 0.5 ms 50 µs0.5 ms Class 1 Laser 650 nmSpot size (1)14 (0.55) @13 m (42.65 ft)—0.6 (0.02) @ 250 (9.84) 1.3 (0.05) @ 120 (4.72)—13 (0.51) @ 18 m (59.05 ft)Response time 0.25 ms —0.333 ms 0.5 ms—0.25 ms42JT VisiSight SensorProduct Selectionexample, 42JT-P2LAT1-A2) or -F4 for a 4-pin DC micro (M12) QD connection on a 150 mm (6 in.) pigtail (for example, 42JT-P2LAT1-F4).(2)Sensing distance with 92-125 reflector.(3)Sensing distance with 92-118 reflector.8Rockwell Automation Publication 42JSJT-TD001B-EN-P - August 2023Rockwell Automation Publication 42JSJT-TD001B-EN-P - August 2023942JT VisiSight SensorUser InterfaceWiring Diagrams42JT Push Button Lock/UnlockThe push button or remote teach can be used to help prevent unauthorized users from changing teach settings.To lock the push button, press and release the button three times within 3 seconds. Both status indicators flash synchronously for 3seconds, which indicates that the push button is now locked.To unlock the push button, press and release the button three times within 3 seconds. Both status indicators flash asynchronously for 3seconds, which indicates that the push button is now unlocked.To lock the push button permanently, connect the white wire (pin 2) to -V.42JT Remote TeachThe sensor can be taught remotely via the white wire (pin 2).Connection to +V acts the same as the button being pressed and no connection is the same as the button not being pressed. The sensor can be taught by following the same teach/timing sequence as used in the push button teach (for example, connect to the +V for more than 3 seconds to teach the target, disconnect from the +V; remove the target and connect to the +V for less than 1 second to teach the no target condition). All push button functions can also be conducted via remote teach.Approximate DimensionsThe 42JT mounting holes are located toward the rear end of the sensor while the 42JS mounting holes are located toward the front. Both sensors are compatible with the industry standard 25.4 mm (1in.) mounting. The 42JT flexible mounting hole space range of 22.9…25.4 mm (0.9…1 in.) makes it compatible with the 24.1 mm (0.95 in.) hole space sensors.See rok.auto/systemtools for two-dimensional and three-dimensional CAD drawings.yellow status indicator is ON when the output is deactivated and OFF when it is activated.Transmitted beam emitterOutput wiring1212Normal operation: no connection.Remote teach: See 42JT Remote Teach section.Push button lock: connect to a -V. See the 42JT Push Button Lock/Unlock section.For Normal operation, white wire (pin 2) needs no connection. To disable lightsource, connect white wire (pin 2) to +V.3Output is PNP or NPN (push-pull) for color mark sensors.M12 PlugM8 Plug12M8 x 1(1.34)12(1.34)2.8(0.11)10Rockwell Automation Publication 42JSJT-TD001B-EN-P - August 202342JT VisiSight SensorTypical Response CurvesS i z e [m m ]Polarized Retroreflective Spot Size (6 m)Diffuse Spot Size (800 mm)Distance [mm (in.)]E x c e s s G a i nStandard Diffuse (800 mm)Distance [mm (in.)]Red Polarized Retroreflective (6 m)(6.6)(3.3)(13.1)(23)(16.4)(19.7)(9.9)101100E x c e s s G a i nDistance [m (ft)]1(3.3)2(6.6)3(9.9)4(13.1)5(16.4)6(19.7)7(23)10020030040050060003(9.9)6(19.7)9(29.5)12(39.4)15(49.2)10203092-1185(16.4)10(32.8)15(49.2)5101520S i z e [m m ]Laser Polarized Retroreflective Spot Size (13 m)Laser Polarized Retroreflective — Margin Curve (13 m)E x c e s s G a i nDistance [m (ft)]Distance [m (ft)]Distance [m (ft)]100010011010(0.4)800(31.5)600(23.6)400(15.75)200(7.87)0010203040506070800(31.5)600(23.6)400(15.75)200(7.87)S i z e [m m ]0510152025300200(7.87)150(5.91)100(3.94)50(1.96)250(9.84)Laser Diffuse Spot Size (250 mm)Laser Diffuse (250 mm)0.00.51.01.52.00200(7.87)150(5.91)100(3.94)50(1.96)250(9.84)Distance [mm (in.)] E x c e s s G a i nDistance [mm (in.)]S i z e [m m ]Rockwell Automation Publication 42JSJT-TD001B-EN-P - August 20231142JT VisiSight Sensor(1)The spot is square in shape with one side dimension per graph.Background Suppression (180 mm) — Spot SizeLaser Background Suppression (120 mm) — Spot SizeDistance [mm (in.)]E x c e s s G a i nLaser Background Suppression (120 mm)Distance [mm (in.)]Background Suppression (180 mm)E x c e s s G a i nDistance [m (ft)]Background Suppression (400 mm) — Spot SizeBackground Suppression (400 mm)E x c e s s G a i nDistance [m (ft)]Distance [m (ft)]Distance [m (ft)]5101520(7.87)(5.91)(3.94)(1.96)051015200(7.87)150(5.91)100(3.94)50(1.96)(0.79)(1.57)(2.36)(3.15)(3.94)(4.72)051015200.00.51.01.52.02.53.0020(0.79)40(1.57)60(2.36)80(3.15)100(3.94)120(4.72)0510152025300200(7.87)400(15.7)100(3.94)300(11.8)05101520(7.87)(15.7)(3.94)(11.8)S i z e [m m ]Distance [mm (in.)]789101112130608010012014151617E x c e s s G a i n [%] Color Mark(1)S i z e [m m ](1)S i z e [m m ](1)12Rockwell Automation Publication 42JSJT-TD001B-EN-P - August 202342JT VisiSight SensorAccessoriesRed Transmitted Beam (13 m) — Spot SizeRed Transmitted Beam (13 m)E x c e s s G a i nDistance [m (ft)] Laser Transmitted Beam (18 m) — Spot SizeLaser Transmitted Beam (18 m)E x c e s s G a i nDistance [m (ft)]Distance [m (ft)]Distance [m (ft)]S i z e [m m ]S i z e [m m ]100010010107.5(24.6)10(32.8)12.5(41)15(49.2)2.5(8.2)5(16.4)3(9.9)6(19.7)9(29.5)12(39.4)15(49.2)2004006008001000120005(16.4)10(32.8)15(65.6)20(65.6)51015510155(16.4)10(32.8)15(65.6)20(65.6)0.2(0.66)0.4(1.31)0.6(1.97)0.8(2.62) 1.0(3.28)10203040S i z e [m m ]*Distance [m (ft)]Clear Object Spot SizeDescription Cat. No.DC micro (M12) QD cordset, straight, 4-pin, 2 m (6.6 ft)889D-F4AC-2DC pico (M8) QD cordset, straight, 4-pin, 2 m (6.6 ft)889P-F4AB-2DC pico (M8) QD cordset, right angle, 4-pin, 2 m (6.6 ft)889P-R4AB-2Mounting bracketStainless steel, L-shaped for 42JT and 42JS60-BJS-L1Stainless steel, L-shaped for 42JS VisiSight 60-BJS-L2Stainless steel60-BKTL-SS Stainless steel, L-shaped for 42JT and 42JS VisiSight60-BJT-L2Plastic, swivel/tilt for 42JS VisiSight 60-2619Replacement, stainless steel, for replacing larger (50 x 50 mm) sensors60-BJT-RCS Protective, stainless steel, U-shaped for 42JT and 42JS60-BJT-U1Protective, stainless steel, horizontal and verticalfor 42JT and 42JS VisiSight 60-BJT-H1ReflectorCorner cube, 76 mm (3 in.) diameter 92-124Corner cube, 84 mm (3.3 in.) diameter 92-125Corner cube, 32 mm (1.5 in.) diameter 92-47Corner cube, 100 x 100 mm (4 x 4 in.)92-108Corner cube, 51 x 61 mm (2 x 2.5 in.)92-109Micro cube, 51 x 61 mm (2 x 2.5 in.) for laser and clear object models92-118DescriptionCat. No.VisiSight Miniature Photoelectric Sensors Technical Data Additional ResourcesThese documents contain additional information concerning related products from Rockwell Automation. You can view or download publications at rok.auto/literature.Resource DescriptionVisiSight Photoelectric Sensors Installation Instructions,publication 42JS-IN001Provides information to install and operate 42JS VisiSight photoelectric sensors.Series 7000 to 42JS VisiSight Replacement Kit Installation Instructions, publication 42JS-IN002Provides information on the kits that are designed to facilitate the transition of the Series 7000 photoelectric sensors to the 42JS VisiSight product family.42JS VisiSight Photoelectric Sensors Installation Instructions,publication 42JS-IN003Provides information to install and operate 42JS VisiSight photoelectric sensors.42JT VisiSight Photoelectric Diffuse Sensors with IO-Link InstallationInstructions, publication 42JT-IN001Provides information to install and operate 42JT VisiSight diffuse photoelectric sensors.42JT VisiSight Photoelectric Polarized Retroreflective Sensors with IO-Link Installation Instructions, publication 42JT-IN002Provides information to install and operate 42JT VisiSight polarized retroreflective photoelectric sensors.42JT VisiSight Photoelectric Transmitted Beam Sensors with IO-Link Installation Instructions, publication 42JT-IN003Provides information to install and operate 42JT VisiSight transmitted beam photoelectric sensors.VisiSight Photoelectric Background Suppression Sensors with IO-Link Installation Instructions, publication 42JT-IN004Provides information to install and operate VisiSight background suppression photoelectric sensors with IO-Link.42JT VisiSight Photoelectric Color Mark Sensors with IO-Link InstallationInstructions, publication 42JT-IN005Provides information to install and operate 42JT VisiSight color mark photoelectric sensors.42JT VisiSight Photoelectric Clear Object Sensors with IO-Link Installation Instructions, publication 42JT-IN006Provides information to install and operate 42JT VisiSight clear object photoelectric sensors.Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1Provides general guidelines for installing a Rockwell Automation industrial system. ProposalWorks™ configuration software, rok.auto/systemtools Helps configure complete, valid catalog numbers and build complete quotes based ondetailed product information.Product Certifications website, rok.auto/certifications Provides declarations of conformity, certificates, and other certification details.Rockwell Automation Publication 42JSJT-TD001B-EN-P - August 202313Publication 42JSJT-TD001B-EN-P - August 2023Supersedes Publication 42JSJT-TD001A-EN-P - July 2018Copyright © 2023 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.Rockwell Automation SupportUse these resources to access support information.Documentation FeedbackYour comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback .Technical Support CenterFind help with how-to videos, FAQs, chat, user forums, Knowledgebase, and product notification updates.rok.auto/support Local Technical Support Phone Numbers Locate the telephone number for your country.rok.auto/phonesupport Technical Documentation CenterQuickly access and download technical specifications, installation instructions, and user manuals.rok.auto/techdocs Literature LibraryFind installation instructions, manuals, brochures, and technical data publications.rok.auto/literature Product Compatibility and Download Center (PCDC)Download firmware, associated files (such as AOP, EDS, and DTM), and access product release notes.rok.auto/pcdcRockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec .Allen-Bradley, expanding human possibility, ProposalWorks, Rockwell Automation, and VisiSight are trademarks of Rockwell Automation, Inc.Trademarks not belonging to Rockwell Automation are property of their respective companies.Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752, İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur。

《微电子光电传感器》课件

等。
医疗电子领域的应用前景
医疗设备：用于监测患者生命体征，如心电图、血压计等诊断设备：用于疾病诊断，如X光机、CT扫描仪等治疗设备：用于治疗疾病，如激光手术、电疗等康复设备：用于康复治疗，如康复机器人、助听器等健康管理：用于健康管理，如智能手环、智能手表等远程医疗：用于远程医疗，如远程诊断、远程手术等
微电子光电传感器技术发展历程
技术起源
光电效应的发现：1887年，赫兹发现光电
效应
光电传感器的诞生：20世纪初，光电传感器开始应用于
工业领域
微电子技术的发展：20世纪 50年代，微电子技术开始快
速发展
光电传感器与微电子技术的结合：20世纪 70年代，微电子光电传感器
开始出现
技术发展现状
汽车电子领域的应用前景
自动驾驶技术：微电子光电传感器在自动驾驶系统中的应用，如激光雷达、摄像头等。
智能座舱：微电子光电传感器在智能座舱中的应用，如手势识别、语
音识别等。
车联网：微电子光电传感器在车联网中的应用，如V2X 通信、车辆定
位等。
电动汽车：微电子光电传感器在电动汽车中的应用，如电池管理系统、电机控制系统
光电编码器
应用领域：工业自动化、机器人、数控机床等工作原理：通过光电转换，将机械运动转换为电信号特点：高精度、高速度、高可靠性应用实例：伺服电机、数控机床、机器人等
光电开关
应用领域：广泛应用于工业自动化、安防、
交通等领域
工作原理：利用光电效应，通过检测光线的变化来控制
开关状态
特点：响应速度快、精度高、寿命长、可靠
微电子光电传感器的PPT大纲
汇报人：

微型光电传感器概要

微型光电传感器概要微型光电传感器的定义微型光电传感器，是主要内置于客户机器的小型放大器内置光电传感器。

与一般的放大器内置光电传感器相同，用于物体的通过检测和定位，大多数检测物体是被称为「卡爪」的金属片。

卡爪进入微型光电传感器的检测区域后，微型光电传感器将进行光学性检测，并发出输出信号。

特长与放大器内置光电传感器相比，具有以下特长①在有个机型系列中，形状的种类很多例如EE-SX67系列中，备有了5种凹槽形状。

可根据顾客的安装位置，选择最佳的形状。

②价格低通过将额定值/性能限制在机器内置用，且将IP保护构造简易化，可以获得物美价廉的产品。

③通过设置为适用于机器内置的检测距离实现小型化例如在凹槽型中，采用3.6mm或5mm为标准的检测距离（凹槽宽）。

在其他检测方式中，如扩散反射型、限定反射型中为5mm 以下，回归反射型、对射型为1ｍ以下，都是以机器内置用为目的的距离规格。

④显示灯的灯亮模式微型光电传感器的显示灯大多在入光时亮起。

在部分机型中作为其他型号，也可选择遮光时灯亮的类型。

例如凹槽型中，需在调整位置时灯亮的情况下，则宜采用遮光时灯亮的类型。

另一方面，需在确认电源施加时灯亮的情况下，则宜采用入光时灯亮的类型。

⑤其他规格（保护构造、输出电流）由于以机器内置为前提，所以不采用防水构造，并将输出电流额定控制在较低的范围内。

另一方面，多数机型的电源电压可以在DC5V下动作。

微型光电传感器原理①光的性质>直射光在空气和水中行进的情况下，总是直线传播。

在对射型传感器中使用外附插口来检测细微物体的示例就是应用了该原理。

折射光在折射率不同的界面上入射时，通过该界面后，前进方向将发生变化的现象。

反射（正反射、回归反射、扩散反射）在镜子和玻璃平面上，光将以与入射角相同的角度反射，这称为正反射。

回归反射板就是利用这种原理，将3个平面互相直交组合后。

所谓「回归」是指「回到原来发射的方向」。

来自回归反射板的反射光向投光的反方向前进，这种反射称为回归反射。