模德MT-11000皮纹电子版本
Molex MTP MPO 光电模块系列手册说明书
MTP*/MPO ADAPTERS AND CABLE ASSEMBLIES*MTP is a registered trademark of US Conec Ltd.ApplicationsNetworking- Data communication centers- Optical electrical modules- Optical switch and routers- PC cards and patch panels- P arallel optic transceiver interconnection - Hubs and servers- Line cardsOrdering InformationMTP/MPO Cables & AdaptersOrder Number Description ISO Drawing106082-1000MTP Connector Kit with FlexiBend™ Boot, 3mm Round Cable, Male and Female - 12-fiber cable106082-1100MTP Connector Kit with FlexiBend™ Boot, 3.8mm Round Cable, Male and Female - 24-fiber cable106081-3250Short MTP Connector Kit, Male and Female -bare ribbon cable106081-2030MTP Connector with Short Push Spring, Male and Female - bare ribbon cable106081-3510MTP Connector Kit, 3mm Round Cable, Male and Female - 12-fiber cable106081-3310MTP Connector Kit, 3mm Round Cable with Enhanced Strain Relief, Male and Female - 12-fiber cable106081-3810MTP Connector Kit, 3.8mm Round Cable, Male and Female - 24-fiber cable106081-3550MTP Connector Kit, 3mm Round Cable, 90° boot, Male and Female - 12-fiber cable106081-3360MTP Connector Kit, 3mm Round Cable with Enhanced Strain Relief 90° boot,Male and Female -12-fiber cable106081-3255MTP Housing Kit, 5mm Round Cable - 48-fiber cable 106085-0000MTP Breakout Kit, Male and FemaleMTP connectors are sold as part of a terminated cable assembly. Components are not sold separately.MTP*/MPO Adapters andCable Assemblies. The extensive line of break-out boxes, break-† discrete fiber leads are ideal for board-level use where ‡ are ideal for Optical Break-Out Cable AssembliesOptical Break-Out Cable AssembliesQSFP , QSFP+ and zQSFP+™ optical cable assemblies use low-profile round cables for improved cable management in high-density applicationsMolex Quad Small Form Pluggable (QSFP+) passive optical cableassemblies meet the QSFP+ interface specification. Multiple cable designs provide improved fiber management options depending on the application and distance requirements. MTP* QSFP+ cables are constructed with 12-fiber 3.0mm round cable for short-run interconnect cable assemblies. A robust 4.5mm round cable with 3.1mm sub-units provides exceptional cable flexibility while ensuring cable integrity and improved cable routing for installations that require chassis to be spread out more than 30m. In addition to the standard MTP QSFP+ jumper assemblies, break-out cables and loopback assemblies provide a complete QSFP+ optical solution.Feature and Benefits• M TP/MPO QSFP+ connector interface meets QSFP+ SFF-8436 interface specification • L ow-profile round cable provides improved cable management • S tandard, high bandwidth or singlemode cables availableCXP optical cable assemblies offer improved fiber management for connecting CXP transceivers and complete Molex’s iPass+™ High-Speed Channel (HSC) CXP Optical SystemMolex’s low-profile CXP optical 3.80mm/5.4mm round cable assembliesoffer improved fiber management over traditional flat cables for connecting CXP transceivers. The CXP optical cable assemblies utilize 24-fibers using industry-standard MTP/MPO connectors, 12 transmit (TX) and 12 receive (RX), cable types include both OM3 and OM4 fiber. This design meets the InfiniBand † bandwidth requirements for CXP modules spaced up to 300.00m (984.25’).Feature and Benefits• MTP/MPO CXP connector interface meets CXP interface specifications • L ow-profile, round cable design for improved cable management over flat cable, with 360° cable-routing capabilityMolex’s CFP(C Form-Factor Pluggable) Cable Assemblies for high density 40 Gig and 100 Gigabit Ethernet ApplicationsMolex’s QSFP and CXP cables also support the MSA interface for cabling for the CFP modules utilizing MTP 12- and 24-fiber cables. The CFP optical cable assemblies utilize 12- and 24-fibers using industry-standard MTP/MPO connectors and cable supporting high-bandwidth (OM3/OM4) fiber.This design meets the Ethernet bandwidth requirements for CFP modules.*MTP is a registered trademark of US Conec Ltd.†InfiniBand is a trademark of the InfiniBand T rade AssociationQSFP , CFP and CXP Cable AssembliesQuad Small Form-factor Pluggable Plus (QSFP+)Ordering Information — QSFP , CXP and CFP CablesPlease note that additional lengths, styles and custom cables are available from the factory . Please contact your local Molex Sales Engineer for more details.QSFP Cable Family Jumpers 12-Fiber Assemblies Part Number Length Cable Type Description 106283-1003 3.0m OM3QSFP Jumper Cable, OFNP, 3.0mm Cable 106283-1005 5.0m OM3QSFP Jumper Cable, OFNP, 3.0mm Cable 106283-101010.0m OM3QSFP Jumper Cable, OFNP, 3.0mm Cable 106283-102525.0m OM3QSFP Jumper Cable, OFNP, 3.0mm Cable106283-1050†50.0m OM3QSFP Jumper Cable, OFNP, 4.5mm Cable 106283-1100†100.0m OM3QSFP Jumper Cable, OFNP, 4.5 mm Cable 106283-7003 3.0m OM4QSFP Jumper Cable, OFNP, 3.0mm Cable 106283-7005 5.0m OM4QSFP Jumper Cable, OFNP, 3.0mm Cable 106283-701010.0m OM4QSFP Jumper Cable, OFNP, 3.0mm Cable 106283-702525.0m OM4QSFP Jumper Cable, OFNP, 3.0mm Cable 106283-7050†50.0m OM4QSFP Jumper Cable, OFNP, 4.5mm Cable 106283-7100†100.0m OM4QSFP Jumper Cable, OFNP, 4.5 mm Cable106260-0102 3.0m OM3QSFP Jumper Cable, OFNP, 3.0mm Cable - FlexiBend™ Boot 106260-0103 5.0m OM3QSFP Jumper Cable, OFNP, 3.0mm Cable - FlexiBend™ Boot 106260-010410.0m OM3QSFP Jumper Cable, OFNP, 3.0mm Cable - FlexiBend™ Boot 106260-010525.0m OM3QSFP Jumper Cable, OFNP, 3.0mm Cable - FlexiBend™ Boot 106260-0106†50.0m OM3QSFP Jumper Cable, OFNP, 4.5mm Cable - FlexiBend™ Boot 106260-0107†100.0mOM3QSFP Jumper Cable, OFNP, 4.5mm Cable - FlexiBend™ Boot106283-4003 3.0m OS2SMQSFP Jumper Cable, OFNP, 3.0mm Cable 106283-4005 5.0m OS2SMQSFP Jumper Cable, OFNP, 3.0mm Cable106283-401010.0m OS2SMQSFP Jumper Cable, OFNP, 3.0mm Cable106283-401325.0m OS2SMQSFP Jumper Cable, OFNP, 3.0mm Cable106283-4018†50.0m OS2SMQSFP Jumper Cable, OFNP, 4.5mm Cable 106283-4028†100.0m OS2SM QSFP Jumper Cable, OFNP, 4.5mm Cable †Cables longer than 30M will be supplied with 4.5mm ruggedized jacketed fiberBreakout- MTP to LCD ‡Part Number Length Cable Type Description106283-5102 3.0m OM3QSFP to SFP Breakout Cable, OFNP,3.0m 106283-5103 5.0m OM3QSFP to SFP Breakout Cable, OFNP,3.0m 106283-510410.0m OM3QSFP to SFP Breakout Cable, OFNP,3.0m 106283-5403 3.0m OM4QSFP to SFP Breakout Cable, OFNP,3.0m 106283-5404 5.0m OM4QSFP to SFP Breakout Cable, OFNP,3.0m 106283-540510.0mOM4QSFP to SFP Breakout Cable, OFNP,3.0m106283-8087 3.0m OS2(SM)QSFP to SFP Breakout Cable, OFNP,3.0m 106283-8088 5.0m OS2(SM)QSFP to SFP Breakout Cable, OFNP,3.0m 106283-808910.0m OS2(SM)QSFP to SFP Breakout Cable, OFNP,3.0m ‡Breakout Cables Available with FlexiBend™ MTP § Connector - please consult factory for details Loopback 106005-1100N/A OM3QSFP MM Loopback - 50/125μm Fiber - OM3Cable Performance SpecificationsFiber T ype*Overfilled Launched Bandwidth (MHz-km) 1 Gigabit Ethernet Link Distance, Min (m)10 Gigabit Ethernet Link Distance, Min. (m)40 and 100Gigabit Ethernet Link Distance,Min. (m)850nm/1300nm 850nm/1300nm 850nm/1300nm 850nm/1300nmOM2500/500600/60086(850nm)No Requirement OM31500/500900/550300(850nm)100 (850nm)OM43500/5001100/550550(850nm)125(850nm)OS2(SM)No Requirement 5000 (1300nm)10000(1300nm)10KM/40KM(1310/1550nm)*Distances are Industry standard averages and are subject to various transmission issues such as glass quality and device performance.§MTP is a registered trademark of US Conec Ltd.Pluggable Plus (QSFP+) CFPCFP OPTICAL CABLE ASSEMBL Y 12-FIBERPN Length Cable Type Description106283-9001 1.0m OM3CFP Jumper Cable, OFNP, 3.0mm Cable106283-9003 3.0m OM3CFP Jumper Cable, OFNP, 3.0mm Cable106283-9005 5.0m OM3CFP Jumper Cable, OFNP, 3.0mm Cable106283-901010.0m OM3CFP Jumper Cable, OFNP, 3.0mm Cable106283-902020.0m OM3CFP Jumper Cable, OFNP, 3.0mm Cable106283-902525.0m OM3CFP Jumper Cable, OFNP, 3.0mm Cable106283-9050*50.0m OM3CFP Jumper Cable, OFNP, 4.5mm Cable106283-9075*75.0m OM3CFP Jumper Cable, OFNP, 4.5mm Cable106283-9100*100.0m OM3CFP Jumper Cable, OFNP, 4.5mm CablePN Length Cable Type Description106283-9201 1.0m OM4CFP Jumper Cable, OFNP, 3.0mm Cable106283-9203 3.0m OM4CFP Jumper Cable, OFNP, 3.0mm Cable106283-9205 5.0m OM4CFP Jumper Cable, OFNP, 3.0mm Cable106283-921010.0m OM4CFP Jumper Cable, OFNP, 3.0mm Cable106283-922020.0m OM4CFP Jumper Cable, OFNP, 3.0mm Cable106283-922525.0m OM4CFP Jumper Cable, OFNP, 3.0mm Cable106283-9250*50.0m OM4CFP Jumper Cable, OFNP, 4.5mm Cable106283-9275*75.0m OM4CFP Jumper Cable, OFNP, 4.5mm Cable106283-9300*100.0m OM4CFP Jumper Cable, OFNP, 4.5mm Cable*Cables longer than 30.0m will be supplied with 4.5mm ruggedized jacketed fiberCFP OPTICAL CABLE ASSEMBL Y 24-FiberPN Length Cable Type Description106284-9001 1.0m OM3CFP Jumper Cable, OFNP, 3.0mm Cable106284-9003 3.0m OM3CFP Jumper Cable, OFNP, 3.0mm Cable106284-9005 5.0m OM3CFP Jumper Cable, OFNP, 3.0mm Cable106284-901010.0m OM3CFP Jumper Cable, OFNP, 3.0mm Cable106284-902020.0m OM3CFP Jumper Cable, OFNP, 3.0mm Cable106284-902525.0m OM3CFP Jumper Cable, OFNP, 3.0mm Cable106284-9050†50.0m OM3CFP Jumper Cable, OFNP, 4.5mm Cable106284-9075†75.0m OM3CFP Jumper Cable, OFNP, 4.5mm Cable106284-9100†100.0m OM3CFP Jumper Cable, OFNP, 4.5mm CablePN Length Cable Type Description106284-9201 1.0m OM4CFP Jumper Cable, OFNP, 3.0mm Cable106284-9203 3.0m OM4CFP Jumper Cable, OFNP, 3.0mm Cable106284-9205 5.0m OM4CFP Jumper Cable, OFNP, 3.0mm Cable106284-921010.0m OM4CFP Jumper Cable, OFNP, 3.0mm Cable106284-922020.0m OM4CFP Jumper Cable, OFNP, 3.0mm Cable106284-922525.0m OM4CFP Jumper Cable, OFNP, 3.0mm Cable106284-9250†50.0m OM4CFP Jumper Cable, OFNP, 4.5mm Cable106284-9275†75.0m OM4CFP Jumper Cable, OFNP, 4.5mm Cable106284-9300†100.0m OM4CFP Jumper Cable, OFNP, 4.5mm Cable†Cables longer than 30.0m will be supplied with 4.5mm ruggedized jacketed fiberPluggable Plus (QSFP+) CFP — continuedCFP FLEXIBEND™ BOOT OPTICAL CABLE ASSEMBL Y 12-FIBERPN Length Cable Type106260-0201 1.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-0203 3.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-0205 5.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-021010.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-022020.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-022525.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-0250*50.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 4.5mm Cable106260-0275*75.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 4.5mm Cable106260-0300*100.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 4.5mm CablePN Length Cable Type106260-0401 1.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-0403 3.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-0405 5.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-041010.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-042020.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-042525.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-0450*50.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 4.5mm Cable106260-0475*75.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 4.5mm Cable106260-0500*100.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 4.5mm Cable*Cables longer than 30.0m will be supplied with 4.5mm ruggedized jacketed fiberCFP FLEXIBEND™ BOOT OPTICAL CABLE ASSEMBL Y 24-FIBERPN Length Cable Type106260-0601 1.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-0603 3.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-0605 5.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-061010.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-062020.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-062525.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-0650†50.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 4.5mm Cable106260-0675†75.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 4.5mm Cable106260-0700†100.0m OM3CFP Jumper Cable, FlexiBend™ Boots, OFNP, 4.5mm CablePN Length Cable Type106260-0801 1.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-0803 3.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-0805 5.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-081010.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-082020.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-082525.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 3.0mm Cable106260-0850†50.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 4.5mm Cable106260-0875†75.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 4.5mm Cable106260-0900†100.0m OM4CFP Jumper Cable, FlexiBend™ Boots, OFNP, 4.5mm Cable†Cables longer than 30.0m will be supplied with 4.5mm ruggedized jacketed fiberQuad Small Form-factorPluggable Plus (QSFP+)CXPCXP CableFamily24-Fiber AssembliesJumpersPart Number Length Cable Type Description106284-1003 3.0m OM3CXP Jumper Cable, OFNP, 3.8mm Cable106284-1005 5.0m OM3CXP Jumper Cable, OFNP, 3.8mm Cable106284-101010.0m OM3CXP Jumper Cable, OFNP, 3.8mm Cable106284-102525.0m OM3CXP Jumper Cable, OFNP, 3.8mm Cable106284-1050*50.0m OM3CXP Jumper Cable, OFNP, 5.4mm Cable106284-1100*100.0m OM3CXP Jumper Cable, OFNP, 5.4mm Cable106284-7003 3.0m OM4CXP Jumper Cable, OFNP, 3.8mm Cable106284-7005 5.0m OM4CXP Jumper Cable, OFNP, 3.8mm Cable106284-701010.0m OM4CXP Jumper Cable, OFNP, 3.8mm Cable106284-702525.0m OM4CXP Jumper Cable, OFNP, 3.8mm Cable106284-7050*50.0m OM4CXP Jumper Cable, OFNP, 5.4mm Cable106284-7100*100.0m OM4CXP Jumper Cable, OFNP, 5.4mm Cable106260-0109 3.0m OM3CXP Jumper Cable, OFNP, 3.8mm Cable – FlexiBend™ Boot106260-0110 5.0m OM3CXP Jumper Cable, OFNP, 3.8mm Cable – FlexiBend™ Boot106260-011110.0m OM3CXP Jumper Cable, OFNP, 3.8mm Cable – FlexiBend™ Boot106260-011225.0m OM3CXP Jumper Cable, OFNP, 3.8mm Cable – FlexiBend™ Boot106260-0113*50.0m OM3CXP Jumper Cable, OFNP, 5.4mm Cable – FlexiBend™ Boot106260-0114*100.0m OM3CXP Jumper Cable, OFNP, 5.4mm Cable – FlexiBend™ Boot*Cables longer than 30.0m will be supplied with 4.5mm ruggedized jacketed fiberBreakout- MTP to LCD†Part Number Length Cable Type Description106284-5102 3.0m OM3CXP to SFP Breakout Cable, OFNP,3.8m106284-5103 5.0m OM3CXP to SFP Breakout Cable, OFNP,3.8m106284-510410.0m OM3CXP to SFP Breakout Cable, OFNP,3.8m106284-5402 3.0m OM4CXP to SFP Breakout Cable, OFNP,3.8m106284-5403 5.0m OM4CXP to SFP Breakout Cable, OFNP,3.8m106284-540410.0m OM4CXP to SFP Breakout Cable, OFNP,3.8m106284-3003 3.0m OM2CXP to QSFP Breakout Cable, OFNP, 3.8mm106284-3005 5.0m OM2CXP to QSFP Breakout Cable, OFNP, 3.8mm106284-3503 3.0m OM3CXP to QSFP Breakout Cable, OFNP, 3.8mm106284-3505 5.0m OM3CXP to QSFP Breakout Cable, OFNP, 3.8mm106284-7503 3.0m OM4CXP to QSFP Breakout Cable, OFNP, 3.8mm106284-7505 5.0m OM4 CXP to QSFP Breakout Cable, OFNP, 3.8mm†Breakout Cables Available with FlexiBend™ MTP‡ Connector - please consult factory for detailsLoopback106005-1602N/A OM3CXP MM Loopback – 50/125μm Fiber – OM3106284-7000NA OM3CXP MM Loopback – 50/125μm Fiber – OM3 (Jumper Version)‡MTP is a registered trademark of US Conec Ltd.Order No. 987650-9711Printed in USA/KC/2015.07©2015 Molex。
蚀纹标准
蚀纹标准一.Mold-TechMold-Tech A Mold-Tech BPtn.# Depth Angle Ptn.# Depth AngleMT-11000 0.0004 1°MT-11200 0.003 4.5°MT-11010 0.001 1.5°MT-11205 0.0025 4°MT-11020 0.0015 2.5°MT-11210 0.0035 5.5°MT-11030 0.002 3°MT-11215 0.0045 6.5°MT-11040 0.003 4.5°MT-11220 0.005 7.5°MT-11050 0.0045 6.5°MT-11225 0.0045 6.5°MT-11060 0.003 4.5°MT-11230 0.0025 4°MT-11070 0.003 4.5°MT-11235 0.004 6°MT-11080 0.002 3°MT-11240 0.0015 2.5°MT-11090 0.0035 5.5°MT-11245 0.002 3°MT-11100 0.006 9°MT-11250 0.0025 4°MT-11110 0.0025 4°MT-11255 0.002 3°MT-11120 0.002 3°MT-11260 0.004 6°MT-11130 0.0025 4°MT-11265 0.005 7°MT-11140 0.0025 4°MT-11270 0.004 6°MT-11150 0.00275 4°MT-11275 0.0035 5°MT-11160 0.004 6°MT-11280 0.0055 8°Mold-Tech C Mold-Tech DPtn.# Depth Angle Ptn.# Depth AngleMT-11300 0.0025 3.5°MT-11400 0.002 3°MT-11305 0.005 7.5°MT-11405 0.0025 4°MT-11310 0.005 7.5°MT-11410 0.0035 5.5°MT-11315 0.001 1.5°MT-11415 0.002 3°MT-11320 0.0025 4°MT-11420 0.0025 4°MT-11325 0.003 4.5°MT-11425 0.0035 5.5°MT-11330 0.002 3°MT-11430 0.007 10°MT-11335 0.002 3°MT-11435 0.010 15°MT-11340 0.003 4.5°MT-11440 0.0005 1.5°MT-11345 0.003 4.5°MT-11445 0.0015 2.5°MT-11350 0.0035 5.5°MT-11450 0.0025 4°MT-11355 0.0025 4°MT-11455 0.003 4.5°MT-11360 0.0035 5.5°MT-11460 0.0035 5.5°MT-11365 0.0045 7°MT-11465 0.005 7.5°MT-11370 0.004 6°MT-11470 0.002 3°MT-11375 0.004 6°MT-11475 0.002 3°MT-11380 0.004 6°MT-11480 0.003 4.5°Plaque #6 Plaque #7 Plaque #8 Plaque #10Ptn.# Depth Ptn.# Depth Ptn.# Depth Ptn.# Depth MT229 0.003 MT325 0.003 MT588 0.0085 MT9800.004MT392 0.004 MT964 0.003 MT888 0.013 MT901 0. 003MT585 0.0035 MT1038 0.002 MT1028 0.0035 MT9450.0065MT889 0.004 MT1043 0.002 MT1067 0.013 MT9700.002MT1013 0.003 MT1170 0.0025 MT1149 0.013 MT9720.0025MT1015 0.0055 MT1192 0.0015 MT1153 0.0075 MT9730.0035MT1039 0.003 MT1239 0.003 MT1211 0.0095 MT9740.0025MT1055 0.0055 MT1240 0.003 MT1226 0.0035 MT9780.003MT1068 0.0055 MT1241 0.002 MT1227 0.0035 MT9850.0025MT1070 0.007 MT1242 0.002 MT1228 0.0095 MT1055-10.0001MT1074 0.0055 MT1243 0.002 MT1230 0.013 MT1055-20.0045MT1129 0.003 MT1244 0.0025 MT1232 0.003 MT1055-30.0005MT1159 0.008 MT1250 0.003 MT1233 0.0035 MT1055-40.0075MT1122 0.0015 MT2019 0.0025 MT1234 0.0035 MT1055 -5 0.001MT1125 0.006 MT2020 0.002 MT1235 0.0035 MT10550.0015MT1126 0.0065 MT2028 0.0025 MT1236 0.0035 MT1055 -6 0.0017MT1127 0.0025 23053 0.002 MT1238 0.0045 MT1055-70.0225MT1526 0.0135 23064 0.0015 23031 0.0085二.昵宏咬花番號拔模斜度平均值μ打光程度加工種類HN-DS11 1° 5 ~ 7 800 噴砂咬花HN-DS12 1.5°10 ~ 13 600 ~ 800HN-DS13 2°12 ~ 15 600 ~ 800HN-DS14 2°13 ~ 19 600 ~ 800HN-DS01 3°25 ~ 30 320HN-DS02 4°35 ~ 40 320HN-DS03 4°36 ~ 42 320 化學咬花HN-DS04 4.5°38 ~ 43 320HN-DS05 1.5°9 ~ 13 800HN-DS06 2°14 ~ 19 800HN-DS07 2.5°19 ~ 24 600HN-DS08 3°25 ~ 30 400三.梨地梨地NO. 1 2°8~9 #400梨地NO. 2 2.5°15~16 #400梨地NO. 3 3°15~17 #400梨地NO. 4 3.5°16~18 #400梨地NO. 5 4°20~23 #400梨地NO. 6 4.5°25~30 #400梨地NO. 7 6°40~42 #320梨地NO. 8 6°57~60 #320梨地NO. 9 6°60~66 #320S ---半光澤G ---半光澤NO. 1 1° 1.7 鏡面NO. 2 1° 1 鏡面NO. 3 1° 1.4 鏡面NO. 4 1° 1.8 1000NO. 5 1° 2.9 1000NO. 6 1.5° 4 1000NO. 7 1.5° 6.5 #800NO. 8 2°7 #800NO. 9 2.5°7.7 #800NO. 10 3°10~11 #600NO. 11 3~4°12~15 #600NO. 12 4~5°16~18 #600S ---半光澤G ---半光澤HN20 2.5°12~14 #400HN21 3°15~17 #400HN22 3~4°23~25 #400HN23 4~5°33~37 #320HN24 4°19~21 #320HN25 4°23~25 #320HN26 4°26~30 #320HN27 5°37~40 #320HN28 5~6°41~43 #320HN30 6°58~63 #320 HN31 6°65~73 #320S ---半光澤G ---半光澤HN1000 1°4~5 #800 HN1001 1°5~6 #800 HN1002 1.5°8~ #800 HN1003 1°3~4 #800 HN1004 1°4~5 #800 HN1005 1°5~6 #800 HN1006 2°10~11 #600 HN1007 2.5°12~13 #600 HN1008 3°17~19 #600 HN1009 1.5°6~7 #600 HN1010 2°7~8 #600 HN1011 3°13~14 #600 HN1012 3.5°25~27 #400 HN1013 4°33~37 #400 HN1014 5°43~50 #400 HN1015 3°19~21 #400 HN1016 4°32~~33 #320 HN1017 5°36~~38 #320 S ---半光澤G ---半光澤HN2000 1.5°8~9 #600 HN2001 2°13~15 #600 HN2002 2.5°22~34 #400 HN2003 3.5°40~44 #400 HN2004 4°44~47 #400 HN2005 5.5°61~65 #400 HN2006 5.5°60~63 #400 HN2007 5°61~64 #400 HN2008 5°63~66 #400 HN2009 3°33~35 #400 HN2010 3.5°43~46 #400 HN2011 2°20~21 #400 HN2012 3°28~32 #400 HN2013 3.5°30~35 #400 HN2014 2.5°19~22 #400 HN2015 2.5°25~29 #400 HN2016 3°33~38 #400 HN2017 4°38~41 #400 HN2018 4°50~58 #400 HN2019 5°70~75 #400 HN2020 2°16~23 #400HN2022 3°25~27 #400HN2023 4°30~34 #400HN2024 4.5°42~50 #400HN2025 5°52~56 #400HN2026 5°62~70 #400S ---半光澤G ---半光澤HN3000 1.5°4~5 #800HN3001 1.5°5~6 #800HN3002 1.5°7~9 #800HN3003 2.5°8~11 #800HN3004 3°10~15 #600HN3005 3°16~18 #600HN3006 3.5°17~20 #600HN3007 1.5°7~9 #600HN3008 2°9~11 #600HN3009 2.5°12~14 #600HN3010 2.5°15~18 #600HN3011 3°18~22 #600HN3012 3.5°24~28 #600HN3013 3.5°27~31 #600S ---半光澤G ---半光澤四.相关术语咬花、蚀纹、晒文，其实质就是同一种工艺。
晒纹斜度对照表
晒纹斜度对照表纹号蚀纹深度出模斜度抛光要求标准研磨NO.13-6 um1°以上镜面妮红研磨 NO.23-5 um1°以上镜面妮红研磨 NO.32-5 um1°以上镜面妮红研磨 NO.43-6 um1°以上800-1000#妮红研磨 NO.54-6 um1°以上800-1000#妮红研磨NO.66-8 um 1.5°以上800-1000#妮红研磨 NO.78-11 um 1.5°以上600-800#妮红研磨 NO.89-12 um2°以上600-800#妮红研磨NO.913-15 um 2.5°以上600-800#妮红研磨NO.1015-18 um 2.5°以上400-600#妮红研磨NO.1124-29 um3-4°400-600#妮红研磨 NO.1231-36 um4-5°400-600#妮红犁地 NO.113-18 um2°以上600#妮红犁地 NO.215-20 um 2.5°以上400#妮红犁地 NO.317-21 um3°以上400#妮红犁地 NO.419-23 um 3.5°以上320-400#妮红犁地 NO.525-30 um4°以上320-400#妮红犁地 NO.630-35 um5°以上320-400#妮红犁地 NO.745-50 um6°以上320#妮红犁地 NO.864-69 um 6.5°以上320#妮红犁地 NO.968-73 um7°以上320#妮红HN 2013-15um 2.5°以上600#妮红HN 2115-18um 2.5°以上400-600#妮红HN 2224-29um3°-4°以上320-400#妮红HN 2331-36um4°-5°以上320#妮红HN 2418-23um3°以上320#妮红HN 2522-27um 3.5°以上320#妮红HN 2627-32um4°以上320#妮红HN 2738-43um 4.5°以上320#妮红HN 2842-47um5°-6°320#妮红HN 2947-52um5°-6°320#妮红HN 3070-75um8°以上320#妮红HN 3175-80um9°以上320#妮红HN 10003-5um1°以上600-800#妮红HN 10014-6um1°以上600-800#妮红HN 10028-11um 1.5°以上600-800#妮红HN 10033-6um1°以上600-800#妮红HN 10044-6um 1.5°以上600-800#妮红HN 10055-8um 1.5°以上600-800#妮红HN 10069-12um2°以上400-600#妮红HN 100713-15um 2.5°以上400-600#妮红HN 100815-18um 2.5°以上400-600#妮红HN 10096-9um 1.5°以上400-600#妮红HN 101114-19um3°以上400-600#妮红HN 101224-29um3°-4°320-400#妮红HN 101335-40um4°-5°320-400#妮红HN 101447-52um5°-6°320-400#妮红HN 101521-26um3°-4°320-400#妮红HN 101636-41um4°-5°320#妮红HN 101745-50um5°-6°320#妮红HN 20008-12um2°以上600#妮红HN 200114-19um3°以上600#妮红HN 200223-28um 3.5°以上400#妮红HN 200336-41um4°以上400#妮红HN 200450-55um 5.5°以上400#妮红HN 200566-71um7°以上400#妮红HN 200671-76um8°以上400#妮红HN 200760-65um7°以上400#妮红HN 200865-70um7.5°以上400#妮红HN 200934-39um4°以上400#妮红HN 201025-45um3°以上400#妮红HN 201120-25um3°以上400#妮红HN 201226-31um 3.5°以上400#妮红HN 201331-36um 3.5°以上400#妮红HN 201419-24um3°以上400#妮红HN 201525-30um4°以上400#妮红HN 201637-42um 4.5°以上400#妮红HN 201742-47um 4.5°以上400#妮红HN 201856-61um6°以上400#妮红HN 201986-90um9°以上400#妮红HN 202015-20um3°以上400#妮红HN 202121-26um 3.5°以上400#妮红HN 202227-32um 3.5°以上400#妮红HN 202336-41u m4°以上400#妮红HN 202454-59um 6.5°以上400#妮红HN 202566-71um7.5°以上400#妮红HN 202684-89um9°以上400#妮红HN 30006-8um 1.5°以上800-1000#妮红HN 30018-11um 1.5°以上600-800#妮红HN 30029-12um2°以上600-800#妮红HN 300313-15um 2.5°600-800#妮红HN 300415-18um 2.5°400-600#妮红HN 300517-22um3°400-600#妮红HN 300624-29um3°-4°400-600#妮红HN 30076-10um 1.5°600-800#妮红HN 30089-14um2°400-600#妮红HN 300913-18um 2.5°400-600#妮红HN 301120-25um3°400-600#妮红HN 301224-29um 3.5°400-600#妮红HN 301331-36um 3.5°400-600#妮红蚀纹型号蚀纹深度in/mm最小出模斜度机器抛光标准MT-110000.0004″ 0.011°模德MT-110100.001″ 0.0251.5°模德MT-110200.0015″ 0.04 2.5°模德MT-110300.002″ 0.053°模德MT-110400.003″ 0.0754.5°模德MT-110500.0045″ 0.116.5°模德MT-110600.003″ 0.0754.5°模德MT-110700.003″ 0.0754.5°模德MT-110800.002″ 0.053°模德MT-110900.0035″ 0.095.5°模德MT-111000.006″ 0.159°模德MT-111100.0025″ 0.064°模德MT-111200.002″ 0.053°模德MT-111300.0025″ 0.064°模德MT-111400.0025″ 0.064°模德MT-111500.00275″ 0.074°模德MT-111600.004″ 0.106°模德蚀纹型号蚀纹深度出模斜度抛光要求标准MT-1100010um1°800#模德MT-1101025um 2.5°800#模德MT-1102040um 3.5°600#模德MT-1103050um4°600#模德MT-1104075um6°400#模德MT-11050110um8.5°400#模德。
MT皮纹标准 Mold
N/A
MT 11003
.000195 in.
.000235 in.
N/A
MT 11004
.000267 in.
.000307 in.
N/A
MT 11005
.000477 in.
.000528 in.
N/A
MT 11006
.001002 in.
.001162 in.
N/A
MT 11007
MT皮纹标准 Mold-tech Texturing
下面所有数据来自于Mold-Tech标准样板。
SPECIFICATIONS FOR THIS PLAQUE
MOLD MATERIAL：P-20 35RC
PLASTIC MATERIAL：GP STYRENE
SURFACE PREPARATION FOR
.00257 in.
MT 1055-7
.00279 in.
.00355 in.
.00393 in.
MT 1055-8
.00310 in.
.00383 in.
.00467 in.
标准编号
深度
最小拔模角
MT 11000
.0004 in.
1度
MT 11010
.0010 in.
1.5度
MT 11020
.0015 in.
.0060 in.
9度
MT 11110
.0025 in.
4度
MT 11120
.0020 in.
3度
MT 11130
.0025 in.
4度
MT 11140
.0025 in.
4度
MT皮纹标准.doc
v1.0可编辑可修改MT皮纹标准 Mold-tech Texturing下面所有数据来自于Mold-Tech 标准样板。
SPECIFICATIONS FOR THIS PLAQUEMOLD MATERIAL：P-20 35RCPLASTIC MATERIAL：GP STYRENESURFACE PREPARATION FORMT MICRO FINISHES：SPI A-2ALL SURFACE MEASUREMENTS WERETAKEN WITH HOMMEL T-1000CCONTACT YOUR LOCAL MOLD-TECHFACILITY REGARDING APPLICATIONOF THESE FINISHES关于此样板说明：模具材料： P20 硬度 35RC样板材料：聚苯乙烯表面为 MT 皮纹：抛光标准SPI A-2采用 HOMMEL T-1000C(粗糙度仪 ) 检测表面与当地模得制造商联系具体应用标准编号Rz Rm TmrMT 11001 .000105 in. .000120 in. N/AMT 11002 .000210 in. .000250 in. N/AMT 11003 .000195 in. .000235 in. N/AMT 11004 .000267 in. .000307 in. N/AMT 11005 .000477 in. .000528 in. N/AMT 11006 .001002 in. .001162 in. N/AMT 11007 .001468 in. .001660 in. N/Av1.0可编辑可修改MT 1055-1 .00035 in. .000420 in. .00047 in.MT 1055-2 .00063 in. .000710 in. .00080 in.MT 1055-3 .00072 in. .000810 in. .00091 in.MT 1055-4 .00093 in. .001040 in. .00117 in.MT 1055-5 .00097 in. .00110 in. .00123 in.MT 1055 .00145 in. .00165 in. .00185 in. MT 1055-6 .00179 in. .00229 in. .00257 in. MT 1055-7 .00279 in. .00355 in. .00393 in. MT 1055-8 .00310 in. .00383 in. .00467 in.标准编号深度最小拔模角MT 11000 .0004 in. 1 度MT 11010 .0010 in. 度MT 11020 .0015 in. 度MT 11030 .0020 in. 3 度MT 11040 .0030 in. 度MT 11050 .0045 in. 度MT 11060 .0030 in. 度MT 11070 .0030 in. 度MT 11080 .0020 in. 3 度MT 11090 .0035 in. 度MT 11100 .0060 in. 9 度MT 11110 .0025 in. 4 度MT 11120 .0020 in. 3 度MT 11130 .0025 in. 4 度MT 11140 .0025 in. 4 度拔模角是度，深度 4v1.0可编辑可修改MT 11150 .00275 in. 4 度MT 11160 .0040 in. 6 度。
T1000使用手册中文正式版
操作条件：
• 可允许的温度范围：0 到+45 摄氏度 • 在没有冷凝的情况下可允许的相对湿度为：85%
重要！
请遵守下列的安全指南：
确保紧固带安全系紧防止设备滑落！
确保连线没有卡住或纠缠。
永远关闭纸箱盖防止受到外部不良影响，确保纸张可以安全输送。
由于联接电缆长度的限制使用时应注意避免损坏 T1000 和驱动器之 间的电缆。
1.3 拆卸注意事项
下列的元件拆卸时应注意：
• 铁片 • 塑料材料 • 电路板（控制装置和测量电子装置）
1-3 T 1000
1.3 拆卸注意事项
HOMMELWERKE
1-4 T 1000
2 初始操作
HOMMELWERKE
2 初始操作
2.1 产品包
T1000/II 基本装置，项目号 240850，包括：
II
缩略语/词汇/符号
缩略语/词汇/符号
Abbott-Kurve C1/C2 Fh Fl KOMP Lc,λc In Ir Lt LV Mb Mr n，N P，Prg PM Pt R3z Ra Rk Rku Rmr(c) RPC Rpk Rq Rsk RSm Rt Rvk Rz St.Abw Standard-Einstellung Vh Vt
2.3.2 插入探头
进行如下：
图 2-1：插入探头
1. 从包装盒中将探头取出,将驱动器的探头插座向上倾斜并将探头以倾斜方向插 入探头插座（见图 2-1）。
确保插槽（探头连接槽）和插针（探测臂）完好接合。
2. 将探头接收槽的倾斜复位。
直线驱动器现在准备就绪。
十字测量：
如果直线驱动器用于十字测量，传感器插入插座后向想要的方向旋转,使倾斜的探测 插座旋转 90°之后，将探测插座复位。
MT系列安装和操作说明书
MT 系列近红外测试仪安装和操作说明书
7.1 菜单的结构 菜单软件是一个树状结构，功能选择通过按键控制，菜单的右下半部为可以改变的参数。 7.1.1 按键锁: 按键可以锁住，只有输入正确的密码才可以打开。如果忘记了密码，请与 PSC 联系。
7.1.2 显示选择
该按键的作用是返回主菜单 。 单成分测试的主菜单
按确认键，选择相应的产品：
水分：13.05% 产品：E（05）新产品代号接受！
7.1.4 取样平均
取样平均功能键可以记录抓取样品过程的平均 仪器测试数据。该功能只在单成分测试下可以使用。
-6-
主菜单显示：
水分：13.05% 产品：A（01）
MT 系列近红外测试仪安装和操作说明书
按取样键一次， 显示：
水分：13.05% 产品：A（01）
水分：13.05% 标定程序
选择生成这些数据对的产品代码:
- 11 -
水分：13.05% 密码：0000
MT 系列近红外测试仪安装和操作说明书
移动光标到产品 代码下
用上/下键修改 产品代码
水分：13.05% 产品：A（01）
水分：13.05% 产品：B（02）
按确认键进入
水分：13.05% 产品：A（01）
7.1.3 产品代号选择
MT 系列一般内置 10 个测试产品代码，按该键选中所须产品并按确认。 注意:产品代号可以根据用户的要求扩展到 50 个。
单成分测试的主显示：
水分：13.05% 产品：A（01）
按产品代号选择，显示循环出现其他的产品代号：
水分：13.05% 产品：B（02）？？
模拟输出 MT 具有 2 路模拟输出，提供的隔离电流和电压信号。
Fibre Optic Power Meter MPM1000 说明书
SPECIFICATIONS Detector Type: GermaniumWavelength:850 nm, 1300 & 1550 nm typicalMeasurement Range:+5 to -60 dBmMeasurement Accuracy:+/- 5% at -23 dBmMeasurement Resolution: 0.1 dBmdBm and dBrel:YesBatteries:2 x AA Alkaline Cells (NiMh on NiCad can be used) Battery Life:50 hours continuous80 hours modulated Power Input:Can operate and charge internal batteries using optional chargerOptical Connector:ST, FC or SC connector adaptors availableSafety:Laser Class 1Case Dimensions:160 mm x 83 mm x 30 mm InstrumentWeight:220gOperational Temperature:-15˚C to +50˚C (5˚F to 122˚F) Operational Humidity:95% at 40˚C (104˚F) Storage Temperature:-20˚C to 70˚C (-4˚F to158˚F)M P M1000Fibre Optic Power MeterDESCRIPTIONThe MPM1000 is an accurate optical power meter that can be used for optical loss testing of fibre optic cables. It has been pre-calibrated for absolute power levels with reference to 1mW (dBm) for 850 nm, 1300 nm and 1550 nm laser frequencies using multi-mode cables. However, it can also be used in relative power mode and can therefore also be used on single-mode cables. The MPM1000 is accurate to (5% @ -23 dBm (±0.22 dB's) and has a wide dynamic range of +5 dBm to -60 dBm with a resolution of 0.1 dBm.It is particularly suitable for the testing of LAN's, FDDI, and other multimode links whether inside or outside a building.Although the MPM1000's main use is in fibre optic cable attenuation testing, other applications include fibre continuity testing, connector testing, and patch lead testing.Battery status warning indicates low battery condition. An optical battery charger is available when using rechargeable batteries.s850, 1300 & 1550nm Germanium Detector s Wide Dynamic Ranges dBm and dBrel (relative) measurement modess Automatic Power Downs Power Down override during dBrel measurementss Exceptional battery lifes Ruggedised waterproof housing to IP54 s 3 Year manufacturers warrantyUKArchcliffe Road, Dover CT17 9EN EnglandT (0) 1 304 502101F (0) 1 304 207342UNITED STATES4271 Bronze Way, Dallas,TX75237-1017 USAT 1 800 723 2861T 1 214 330 3203F 1 214 337 3038OTHER TECHNICAL SALES OFFICESValley Forge USA, TorontoCANADA, Mumbai INDIA,Le Raincy FRANCE, CherrybrookAUSTRALIA, Guadalajara SPAINand The Kingdom of BAHRAIN.ISO STATEMENTRegistered to ISO 9001:1994 Reg no. Q 09250Registered to ISO 14001 Reg no. EMS 61597MPM1000_DS_en_V02Megger is a re g i s t e r ed trademark ORDERING INFORMATIONItem Order Code Multimode light source with ST connector MPM1000 Included Accessories:User Guide6172-628 Test & Carry Pouch6220-714 Optional AccessoriesSingle Mode Patch Cord withFC / SC Connectors (1 metre)22440-007 Single Mode Patch Cord withFC / FC Connectors (1 metre)22440-008 Single Mode Patch Cord withFC / ST Connectors (1 metre)22440-009 Single Mode Patch Cord withST / ST Connectors (1 metre)22440-015 Single mode patch cord withST/SC connectors22440-027 Single Mode Patch Cord withSC / SC Connectors (1 metre)22440-016Multimode Patch Cord withFC / FC Connectors (1 metre) 50 µm22440-010 Multimode Patch Cord withFC / ST Connectors (1 metre) 50µm22440-011 Multimode Patch Cord withFC / SC Connectors (1 metre) 50 µm22440-012 Multimode Patch Cord withST / ST Connectors (1 metre) 50 µm22440-013 Multimode Patch Cord withST / SC Connectors (1 metre) 50 µm22440-014 Multimode Patch Cord withSC / SC Connectors (1 metre) 50 µm22440-017 Multimode Patch Cord withFC / ST Connectors (1 metre) 62.5 µm22440-028 Multimode Patch Cord withST / ST Connectors (1 metre) 62.5 µm22440-029 Multimode Patch Cord withST / SC Connectors (1 metre) 62.5 µm22440-030 Multimode Patch Cord withFC / SC Connectors (1 metre) 62.5 µm22440-031 Multimode Patch Cord withSC / SC Connectors (1 metre) 62.5 µm22440-032 Multimode Patch Cord withFC / FC Connectors (1 metre) 62.5 µm22440-033In-line gender changing adaptor withMultimode ST connectors22440-019 In-line gender changing adaptor withSingle mode SC connectors22440-020Item Order Code In-line gender changing adaptor withMultimode SC connectors22440-021 In-line gender changing adaptor withSingle mode ST connectors22440-022 In-line gender changing adaptor withSingle mode FC connectors22440-003Bare Fiber adaptor SC connector25970-034 Bare Fiber adaptor FC connector25970-035 Bare Fiber adaptor ST connector25970-036 Bare Fiber adaptor SC, ST andFC connectors25970-037* SC Connector or FC Connector or ST Connectorrequired with bodyUK DC Power Supply27900-050 USA DC Power Supply27900-051 EU DC Power Supply27900-052。
MT皮纹标准 Mold
09-09-09 10:18 发表于：《设计之美》分类：未分类
下面所有数据来自于Mold-Tech标准样板。
SPECIFICATIONS FOR THIS PLAQUE
MOLD MATERIAL：P-20 35RC
PLASTIC MATERIAL：GP STYRENE
.00091 in.
MT 1055-4
.00093 in.
.001040 in.
.00117 in.
MT 1055-5
.00097 in.
.00110 in.
.00123 in.
MT 1055
.00145 in.
.00165 in.
.00185 in.
MT 1055-6
.00179 in.
.00229 in.
OF THESE FINISHES
关于此样板说明：
模具材料：P20硬度35RC
样板材料：聚苯乙烯
表面为MT皮纹：抛光标准SPI A-2
采用HOMMEL T-1000C(粗糙度仪)检测表面
与当地模得制造商联系具体应用
标准编号
Rz
Rm
Tmr
MT 11001
.000105 in.
.000120 in.
N/A
.0060 in.
9度
MT 11110
.0025 in.
4度
MT 11120
.0020 in.
3度
MT 11130
.0025 in.
4度
MT 11140
.0025 in.
4度
MT 11150
.00275 in.
4度
MT皮纹标准Mold
N/A
MT11003
.000195 in.
.000235 in.
N/A
MT11004
.000267 in.
.000307 in.
N/A
MT11005
.000477 in.
.000528 in.
N/A
MT11006
.001002 in.
.001162 in.
N/A
MT11007
.001468 in.
3度
MT11040
.0030 in.
4.5度
MT11050
.0045 in.
6.5度
MT 11060
.0030 in.
「4.5度
MT 11070
.0030 in.
4.5度
MT 11080
.0020 in.
3度
MT 11090
.0035 in.
5.5度
MT 11100
.0060 in.
9度—
MT 11110
.0025 in.
4度
MT 11120
.0020 in.
3度
MT 11130
.0025 in.
4度
MT 11140
.0025 in.
4度
MT 11150
.00275 in.
4度
MT 11160
.0040 in.
6度
MT MICRO FINISHES:SPI A-2
ALL SURFACE MEASUREMENTS WERE TAKEN WITH HOMMEL T-1000C
CONTACT YOUR LOCAL MOLD-TECH FACILITY REGARDING APPLICATION OF THESE FINISHES
模德MT-11000皮纹ppt课件
Hommer Tester T1000 C - 320
Dat:-------------Nr:----------------
Lt = 15 mm Lc = 2.5 mm Ra = 09.81 Um Rz = 56.24 Um Rm = 64.32 Um Nr = 00032/cm
15 mm
Hommer Tester T1000 C - 320
15 mm
Hommer Tester T1000 C - 320
Dat:-------------Nr:----------------
Lt = 15 mm Lc = 2.5 mm Ra = 12.18 Um Rz = 58.84 Um Rm = 64.88 Um Nr = 00023/cm
15 mm
六. 咬 花 粗 度 比 較 / 精 密測 試
以下是使用德國 HOMMEL TESTER T1000 型表面粗度測定器所測出 表面粗度, 深度及圖形, 藉此可 明白區分噴砂, 梨地,皮紋及寫真等類花 紋之不同. 主要符號說明如下: Ra: 算 術平 均 粗 度 值 Rz: 山 谷 平 均 值 Rm: 最 大 山 谷 深 度 值
4
MT-11150
4
MT-11160
6
DEEP. .0004 .001 .0015 .002 .003 .0045 .003 .003 .002 .0035 .006 .0025 .002 .0025 .0025 .00275 .004
TEXTURE # DRAFT MT-11200 4.5 MT-11205 4 MT-11210 5.5 MT-11215 6.5 MT-11220 7.5 MT-11225 6.5 MT-11230 4 MT-11235 6 MT-11240 2.5 MT-11245 3 MT-11250 4 MT-11255 3 MT-11260 6 MT-11265 7 MT-11270 6 MT-11275 5 MT-11280 8
MT皮纹标准.doc
MT皮纹标准.docv1.0可编辑可修改MT皮纹标准 Mold-tech Texturing下面所有数据来自于Mold-T ech 标准样板。
SPECIFICATIONS FOR THIS PLAQUE MOLD MATERIAL：P-20 35RC PLASTIC MATERIAL：GP STYRENE SURFACE PREPARATION FORMT MICRO FINISHES：SPI A-2ALL SURFACE MEASUREMENTS WERE TAKEN WITH HOMMEL T-1000C CONTACT YOUR LOCAL MOLD-TECH FACILITY REGARDING APPLICATIONOF THESE FINISHES关于此样板说明：模具材料： P20 硬度 35RC样板材料：聚苯乙烯表面为 MT 皮纹：抛光标准SPI A-2采用 HOMMEL T-1000C(粗糙度仪 ) 检测表面与当地模得制造商联系具体应用标准编号Rz Rm TmrMT 11001 .000105 in. .000120 in. N/A MT 11002 .000210 in. .000250 in. N/A MT 11003 .000195 in. .000235 in. N/A MT 11004 .000267 in. .000307 in. N/A MT 11005 .000477 in. .000528 in. N/A MT 11006 .001002 in. .001162 in. N/A MT 11007 .001468 in. .001660 in. N/Av1.0可编辑可修改MT 1055-1 .00035 in. .000420 in. .00047 in.MT 1055-2 .00063 in. .000710 in. .00080 in.MT 1055-3 .00072 in. .000810 in. .00091 in.MT 1055-4 .00093 in. .001040 in. .00117 in.MT 1055-5 .00097 in. .00110 in. .00123 in.MT 1055 .00145 in. .00165 in. .00185 in. MT 1055-6 .00179 in. .00229 in. .00257 in. MT 1055-7 .00279 in. .00355 in. .00393 in. MT 1055-8 .00310 in. .00383 in. .00467 in.标准编号深度最小拔模角MT 11000 .0004 in. 1 度MT 11010 .0010 in. 度MT 11020 .0015 in. 度MT 11030 .0020 in. 3 度MT 11040 .0030 in. 度MT 11050 .0045 in. 度MT 11060 .0030 in. 度MT 11070 .0030 in. 度MT 11080 .0020 in. 3 度MT 11090 .0035 in. 度MT 11100 .0060 in. 9 度MT 11110 .0025 in. 4 度MT 11120 .0020 in. 3 度MT 11130 .0025 in. 4 度MT 11140 .0025 in. 4 度拔模角是度，深度 4v1.0可编辑可修改MT 11150 .00275 in. 4 度MT 11160 .0040 in. 6 度。
METAL DOT MATRIX SERIES MDM 1000 - 2000 产品说明书
METAL DOT MATRIX SERIESMDM 1000 - 2000 USED BY:THE MOST VERSATILE MARKINGSOLUTION FOR INDUSTRIAL PRODUCTIDENTIFICATIONSTANDARDEmergency stopManual input / outputSingle access pointLCD display and front control panelfor technical diagnosticsUp to 250 plates capacity hoppers:input & outputTECHNICAL FEATURES PLATE & FEEDER dimensions width: 1.18 - 4.53 in / 30 - 115 mm - only MDM1000 up to 7.092 in / 180 mm height: 0.83 - 3.54 in / 21 - 90 mm - only MDM1000 up to 4.334 in / 110 mm 0.0157 - 0.0354 in / 0.4 - 0.9 mm thickness aluminium, copper, and brass materials MDM1000: manual feed - Single Access Point MDM2000: up to 250 plates capacity. (0.0157 in / 0.4 mm)input hopper MDM1000: manual feed MDM2000: up to 250 plates capacity. Options: FIFO (first in – first out) technology or side eject output hopper STAMPING technology micro percussion using a stylus in Widia steel - marking pressure adjustable depending on the material to be stamped (standard force 500 N)resolution 200 dpi fonts standard Windows fonts including special characters and symbols logos up to 2 at a time, resident in equipment. Max area about 13 square in / 84 cm²performance depending on font and logo size - marking speed 50 dots per second stamping in 'DRAFT' mode increases the speed by 65%layout facilities fonts and logos can be rotated 90°/180°/270°stamping area full plate except for 0.039 in / 1 mm from the top and left/right edges and 0.28 in / 7 mm from the bottom edge. Avoid edges in order to not damage the MUNICATION INTERFACE & SOFTWARE communication interface RS232 serial port protocols CIM, Xon-Xo , MultiEmbosser and Pound-Pound operating system Sword PC application proprietary software compatible with Windows / XP / Vista / 7application software automatic data field; plate archive; DBIII, DBIV, Excel, MS Access file compatibility;self diagnostics, automatic repetition of faulty plate personalization, resetable and non-resetable counters.LCD edit via external keyboard; 20 storable formats downlodable data format 50 fields of 80 characters each (Variable, Fixed data, Counters, etc.)HARDWARE power supply 100 - 117 - 220 - 230 or 240 Volts - 50 or 60 Hz power consumption 100 Watt operating environment temperature: 41 - 104 °F / 5 -40 °C relative humidity: 30% - 90 % non condensing dimensions (WxDxH)MDM1000/MDM2000: 24.8 x 29.1 x 15 in / 630 x 740 x 380 mm weight MDM1000 119 lbs / 54 Kg - MDM2000 126 lbs / 57 Kg VARIOUS LCD display 2 lines of 40 characters LCD display for diagnostics and o ine operation FLASH memory technology for easy firmware upgrade operation others Widia stylus micro percussion Logo + text 18 characters Font arial 18 - 1 row Standard quality 133 s.Draft quality 80 s.Lithium back up battery; security operation with key lock; machine status indicator lights; near end input / near full output hopper plate sensors for continuous production (MDM2000); visual alarm kit for operator alert VERSATILE - The dot peening technology makes the MDM1000 / 2000 one of the most versatile marking solutions for metal plates, since it allows total freedom in designing the plate layout.EASY & FLEXIBLE - Manual (MDM1000) or automatic (MDM2000) loading and unloading has never been easier. Equipped with a unique clamp for plates of most dimensions and metals, the METAL DOT MATRIX are designed to meet most requirements in metal plate marking. CIM has developed various command protocols allowing the MDM1000 / 2000 to easily interface with custom applications.。