宁昊电子KDS DSX321G 8MHZ规格书
相关主题
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
(2) PACKING
(3) REFLOW CONDITIONS (REFERENCE) (4) LAND PATTERN (REFERENCE)
(5) RELIABILITY SPECIFICATION
(6) OTHER HANDLING INSTRUCTIONS
Refer to 5. Refer to 6. Refer to 7. Refer to 8. Refer to 9. ~ 11.
Mark A
B
C
D
E
F
Jul. Aug. Sep. Oct. Nov. Dec.
G
H
J
K
L
M
Plating material of a terminal. : Ni Plating + Au Plating. A clearance between the soldering terminal portion and a print circuit board side should be less than 0.1mm.
#1
Unit : mm # 2 Tolerance : 㼼0.1
Figure-1 Logo(1) and Nominal Frequency (2) should be printed as follows by producing district
Made in INDONESIA --> Spec. No.: 1C208000CE0H , Logo : D , Frequency: 08
* Made in INDONESIA : Under Bar with D
Nominal Frequency ( 2 ) = Mark two digits from upper decimal point (ex. 8.000000 MHz ----> 08 )
Manufacturing lot No.( 3 )
Serial No. : 2014-0187
DATE : 2014/02/12
ITEM :
CRYSTAL RESONATOR
TYPE :
DSX321G
- - - - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - - - - - -
㻼㼛㼘㼥㼟㼠㼥㼞㼑 㼚㼑㻔㼃㼔㼕㼠㼑㻕
(4) Storage condition Temperature : +40 °C max. Relative Humidity : 80% max. ( It is a guaranteed term because it obtains an excellent soldering: 6 months)
(year) ex.
2014
(Mont h)e x.
Feb.
shall be marked as ' 4 ' (The last digit of the year) shall be marked as ' B ' (As shown in Table-1.)
(Table-1.)
Month Jan. Feb. Mar. Apr. May. Jun.
(1) Dimensions of embossed carrier tape
4.0+/-0 .1
3 +5/ -01.
D2 4 B9 8/+ 0.2
0.25+/-0.05 2.0 +/-0.05 1.0+/-0.1
0 1.
1.55dia.+/-0.05
1 7.5 +/-
4.0+/-0 .1
3 +/.05
NOMINAL FREQUENCY :
8.000MHz
SPEC No. :
- - - - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - - - - -
3 . 2+ /- 0. 1
Serial No. 2014-0187
(1) (2) (3)
2.1
#1 #2 #4 #3 0.9
㻔㻵㼚㼠㼑㼞㼚㼍㼘㻌 㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚 㼟㻕
#4
#3
#1 ,#3 Connected to quartz element #2 ,#4 Open (unconnected)
(1) NOMINAL FREQUENCY (2) OVERTONE ORDER
8.000000 MHz Fundamental
(3) LOAD CAPACITANCE(CL)
10.0 pF
(4) FREQUENCY TOLERANCE (5) DRIVE LEVEL (6) SERIES RESISTANCE (7) OPERATING TEMPERATURE RANGE
±50 ppm max. / -40 ~ +85 °C
2.0pF max. 500Mȍ min. / DC 100 ± 15V
-40 ~ +85 °C
(ref. to +25°C)
2. CONSTRUCTION (1) DIMENSIONS AND MARKING
Refer to 4.
3. OTHER SPECIFICATIONS (1) EMBOSS CARRIER TAPE & REEL
2014/02/12
REMARK
SPEC. No. 1C208000CE0H
DAISHINKU CORP.
REV.
PAGE
3 / 12
DM-Z0002:Style-010
Serial No. 2014-0187
Flange
Item Diameter
Inside of Frange Outside of Frange
1C208000CE0H
- - - - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - - - - - -
±30 ppm max. (at +25 ± 3 °C) 10 ± 2 ȝW 400 ȍ max. (at Series) -40 ~ +85 °C
(8) FREQUENCY CHARACTERISTICS OVER TEMPERATURE
(9) SHUNT CAPACITANCE (10) INSULATION RESISTANCE (11) STORAGE TEMPERATURE RANGE
Refer to 12.
TITLE DSX321G TYPE QUARTZ CRYSTAL SPECIFICATION DATE
2014/02/12
REMARK
SPEC. No. 1C208000CE0H
DAISHINKU CORP.
ห้องสมุดไป่ตู้REV.
PAGE
1 / 12
DM-Z0002:Style-010
4. DIMENSIONS AND MARKING
9.0 ±0.3
11.4 ±1.0 ĭ60 +1.0-0
3.0 ±0.2
4.0 ±0.2 5.0 ±0.2 11.9 +0.5 / -0.0
120°
ĭ13 ±0.2 2.0 ±0.5 10.5 ±0.4
120°
(3) Material of the reel
㻾㼑㼑 㼘
Polystyr ene+Car bon䠄 B lac k䠅
Inside Diameter
Center Core
Center Core Slit
Width
Length Angle
Spindle Diameter Width
Key Seats
Length Angle
Mark A W1 W2 B F1 F2 F3 V 䃗 C
E U ș
(Unit:mm) Dimensions Angle ĭ180 +0.0 / -3.0
- - - - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - - - - - -
Stick a label on the each reel.
(8) Taping dimension
Leader Terminal
Cover-tape Carrier-tape Cover-tape Carrier-tape
The length of cover-tape in the leader is more than 400mm including empty embossed area. After all products were packaged, must remain more than twenty pieces or 400mm empty area, which should be sealed by cover-tape. The tip of cover-tape shall be fixed temporary by paper tape and roll around the core of reel one round. The empty embossed area which are sealed by cover-tape must remain more than 40mm.
(5) Standard packing quantity 3,000 pcs/reel
(6) Material of the tape
Tape Carrier tape Cover tape
Material Polystyrene+Carbon
Polyester
TITLE DSX321G TYPE QUARTZ CRYSTAL SPECIFICATION DATE
2014/02/12
REMARK
SPEC. No. 1C208000CE0H
DAISHINKU CORP.
REV.
PAGE
4 / 12
DM-Z0002:Style-010
Serial No. 2014-0187
(7) Label contents
Type Our specification No. Your Part No. Lot No. Nominal Frequency Quantity Our Company Name Producting Country
C.ENG. ENG.
Serial No. 2014-0187
1. ELECTRICAL CHARACTERISTICS
(This test shall be performed under the conditions of temp.at +25 ±3°C, Relative Humidity 60% max.)
1.15 dia.+/-0.05
2.8 +/ -0 .1
Figure-2
User Direction of feed (Unit : mm)
(2) Dimensions of tape reel
Serial No. 2014-0187
E
θ
3 F
U
C
θ
F 2
V
F1
Figure-3
B
A
W1 W2
TITLE DSX321G TYPE QUARTZ CRYSTAL SPECIFICATION DATE
TITLE DSX321G TYPE QUARTZ CRYSTAL SPECIFICATION DATE
2014/02/12
REMARK
SPEC. No. 1C208000CE0H
DAISHINKU CORP.
REV.
PAGE
2 / 12
DM-Z0002:Style-010
5. EMBOSS CARRIER TAPE & REEL
DATE
RECEIPT
RECEIVED
(signature) (name)
General Manufacture of Quartz Devices
1389 Shinzaike, Hiraoka-cho, Kakogawa, Hyogo 675-0194 Japan Phone (81)79-425-3141 Fax (81)79-425-1134 http://www.kds.info/index_en.htm
(3) REFLOW CONDITIONS (REFERENCE) (4) LAND PATTERN (REFERENCE)
(5) RELIABILITY SPECIFICATION
(6) OTHER HANDLING INSTRUCTIONS
Refer to 5. Refer to 6. Refer to 7. Refer to 8. Refer to 9. ~ 11.
Mark A
B
C
D
E
F
Jul. Aug. Sep. Oct. Nov. Dec.
G
H
J
K
L
M
Plating material of a terminal. : Ni Plating + Au Plating. A clearance between the soldering terminal portion and a print circuit board side should be less than 0.1mm.
#1
Unit : mm # 2 Tolerance : 㼼0.1
Figure-1 Logo(1) and Nominal Frequency (2) should be printed as follows by producing district
Made in INDONESIA --> Spec. No.: 1C208000CE0H , Logo : D , Frequency: 08
* Made in INDONESIA : Under Bar with D
Nominal Frequency ( 2 ) = Mark two digits from upper decimal point (ex. 8.000000 MHz ----> 08 )
Manufacturing lot No.( 3 )
Serial No. : 2014-0187
DATE : 2014/02/12
ITEM :
CRYSTAL RESONATOR
TYPE :
DSX321G
- - - - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - - - - - -
㻼㼛㼘㼥㼟㼠㼥㼞㼑 㼚㼑㻔㼃㼔㼕㼠㼑㻕
(4) Storage condition Temperature : +40 °C max. Relative Humidity : 80% max. ( It is a guaranteed term because it obtains an excellent soldering: 6 months)
(year) ex.
2014
(Mont h)e x.
Feb.
shall be marked as ' 4 ' (The last digit of the year) shall be marked as ' B ' (As shown in Table-1.)
(Table-1.)
Month Jan. Feb. Mar. Apr. May. Jun.
(1) Dimensions of embossed carrier tape
4.0+/-0 .1
3 +5/ -01.
D2 4 B9 8/+ 0.2
0.25+/-0.05 2.0 +/-0.05 1.0+/-0.1
0 1.
1.55dia.+/-0.05
1 7.5 +/-
4.0+/-0 .1
3 +/.05
NOMINAL FREQUENCY :
8.000MHz
SPEC No. :
- - - - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - - - - -
3 . 2+ /- 0. 1
Serial No. 2014-0187
(1) (2) (3)
2.1
#1 #2 #4 #3 0.9
㻔㻵㼚㼠㼑㼞㼚㼍㼘㻌 㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚 㼟㻕
#4
#3
#1 ,#3 Connected to quartz element #2 ,#4 Open (unconnected)
(1) NOMINAL FREQUENCY (2) OVERTONE ORDER
8.000000 MHz Fundamental
(3) LOAD CAPACITANCE(CL)
10.0 pF
(4) FREQUENCY TOLERANCE (5) DRIVE LEVEL (6) SERIES RESISTANCE (7) OPERATING TEMPERATURE RANGE
±50 ppm max. / -40 ~ +85 °C
2.0pF max. 500Mȍ min. / DC 100 ± 15V
-40 ~ +85 °C
(ref. to +25°C)
2. CONSTRUCTION (1) DIMENSIONS AND MARKING
Refer to 4.
3. OTHER SPECIFICATIONS (1) EMBOSS CARRIER TAPE & REEL
2014/02/12
REMARK
SPEC. No. 1C208000CE0H
DAISHINKU CORP.
REV.
PAGE
3 / 12
DM-Z0002:Style-010
Serial No. 2014-0187
Flange
Item Diameter
Inside of Frange Outside of Frange
1C208000CE0H
- - - - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - - - - - -
±30 ppm max. (at +25 ± 3 °C) 10 ± 2 ȝW 400 ȍ max. (at Series) -40 ~ +85 °C
(8) FREQUENCY CHARACTERISTICS OVER TEMPERATURE
(9) SHUNT CAPACITANCE (10) INSULATION RESISTANCE (11) STORAGE TEMPERATURE RANGE
Refer to 12.
TITLE DSX321G TYPE QUARTZ CRYSTAL SPECIFICATION DATE
2014/02/12
REMARK
SPEC. No. 1C208000CE0H
DAISHINKU CORP.
ห้องสมุดไป่ตู้REV.
PAGE
1 / 12
DM-Z0002:Style-010
4. DIMENSIONS AND MARKING
9.0 ±0.3
11.4 ±1.0 ĭ60 +1.0-0
3.0 ±0.2
4.0 ±0.2 5.0 ±0.2 11.9 +0.5 / -0.0
120°
ĭ13 ±0.2 2.0 ±0.5 10.5 ±0.4
120°
(3) Material of the reel
㻾㼑㼑 㼘
Polystyr ene+Car bon䠄 B lac k䠅
Inside Diameter
Center Core
Center Core Slit
Width
Length Angle
Spindle Diameter Width
Key Seats
Length Angle
Mark A W1 W2 B F1 F2 F3 V 䃗 C
E U ș
(Unit:mm) Dimensions Angle ĭ180 +0.0 / -3.0
- - - - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - -- - - - -- - - - -- - - -- - - - - - - - -
Stick a label on the each reel.
(8) Taping dimension
Leader Terminal
Cover-tape Carrier-tape Cover-tape Carrier-tape
The length of cover-tape in the leader is more than 400mm including empty embossed area. After all products were packaged, must remain more than twenty pieces or 400mm empty area, which should be sealed by cover-tape. The tip of cover-tape shall be fixed temporary by paper tape and roll around the core of reel one round. The empty embossed area which are sealed by cover-tape must remain more than 40mm.
(5) Standard packing quantity 3,000 pcs/reel
(6) Material of the tape
Tape Carrier tape Cover tape
Material Polystyrene+Carbon
Polyester
TITLE DSX321G TYPE QUARTZ CRYSTAL SPECIFICATION DATE
2014/02/12
REMARK
SPEC. No. 1C208000CE0H
DAISHINKU CORP.
REV.
PAGE
4 / 12
DM-Z0002:Style-010
Serial No. 2014-0187
(7) Label contents
Type Our specification No. Your Part No. Lot No. Nominal Frequency Quantity Our Company Name Producting Country
C.ENG. ENG.
Serial No. 2014-0187
1. ELECTRICAL CHARACTERISTICS
(This test shall be performed under the conditions of temp.at +25 ±3°C, Relative Humidity 60% max.)
1.15 dia.+/-0.05
2.8 +/ -0 .1
Figure-2
User Direction of feed (Unit : mm)
(2) Dimensions of tape reel
Serial No. 2014-0187
E
θ
3 F
U
C
θ
F 2
V
F1
Figure-3
B
A
W1 W2
TITLE DSX321G TYPE QUARTZ CRYSTAL SPECIFICATION DATE
TITLE DSX321G TYPE QUARTZ CRYSTAL SPECIFICATION DATE
2014/02/12
REMARK
SPEC. No. 1C208000CE0H
DAISHINKU CORP.
REV.
PAGE
2 / 12
DM-Z0002:Style-010
5. EMBOSS CARRIER TAPE & REEL
DATE
RECEIPT
RECEIVED
(signature) (name)
General Manufacture of Quartz Devices
1389 Shinzaike, Hiraoka-cho, Kakogawa, Hyogo 675-0194 Japan Phone (81)79-425-3141 Fax (81)79-425-1134 http://www.kds.info/index_en.htm