闹钟+定时器主程序代码(STM8 单片机)

set_c=1;
}
}
//**********************校时函数****************************//
void adjust_times(void)
{
if(ok==0)
{
display(days);
if(lr==0)ud=&A;
unsigned char days[8];//存放当前日期
unsigned char T1=100;//200x10ms=1s秒计算
unsigned char T2=0;//20x10ms=200ms
unsigned char c=0;//用于记录闹钟个数
unsigned char hour=8,minute,second;
unsigned char hour_[5],minute_[5],second_[5]={1,2,3,4,5};
unsigned char sec_time[8];
unsigned char clocks[5][8];//可存5个闹钟信息
unsigned char times[8];//存放当前时间
run=0;
sec1=0;
sec2=0;
esc=0;
}
}
//**********************闹钟设置****************************//
void set_clock(void)
{
unsigned char i,j;
display(times);
if(lr==0)ud=&G;//指针指向G
if(lr==1)ud=&H;
if(lr==3)ud=&I;
if(lr==4)ud=&J;
if(lr==6)ud=&K;
if(lr==7)ud=&L;
times[lr]=duan_ma[*ud];//*ud即是ud所指变量的当前值
void second_clock(void)
{
if(sec1==999)sec1=999;
sec_time[0]=0x00;
sec_time[1]=0x00;
sec_time[2]=0x00;
sec_time[3]=duan_ma[sec1/100];
sec_time[4]=duan_ma[sec1%100/10];
{
G=hour/10;H=hour%10;
I=minute/10;J=minute%10;
_Bool run;//控制秒表
_Bool up;//加
_Bool down;//减
_Bool left;//左移
_Bool right;//右移
_Bool set;//设置闹钟
_Bool adjust;//调整时间
_Bool ok;//确定
_Bool esc;//取消或删除
_Bool duan @PE_ODR:7; //PE6作为段锁存
void keyscan(void);//键盘扫描函数
void set_clock(void);//设置闹钟
void adjust_times(void);//
void clock_display(void);//闹钟显示函数
void alarm(void);
void second_clock(void);
sec_time[5]=sec_duan_ma[sec1%10];
sec_time[6]=duan_ma[sec2/10];//小数位
sec_time[7]=duan_ma[sec2%10]; //小数位
display(sec_time);
if(esc==1)
{
left=0;
void time_process(void);//时间处理函数
void times_bi_duan_ma(unsigned char,unsigned char,unsigned char);
void days_bi_duan_ma(int,unsigned char,unsigned char);
main()
{
GPIO_initial();
TIM2_initial();
leapyear(year);
while(1)
{
time_process();
alarm();
if(T2==0)//消抖，延时100ms
keyscan();
if(hour==0&minute==0&second==0)
int sec1,sec2;//用于秒表的变量
unsigned char leapyear(int b);//闰年判断
void TIM2_initial(void);//初始化定时器
void GPIO_initial(void);//初始化I/O引脚
void display(unsigned char x[8]);//时间显示函数
unsigned char month=12,day=12;int year=2011;
unsigned char *ud;//ud加减指针
unsigned char lr;//记录指针所指位
char A,B,C,D,E,F,G,H,I,J,K,L;
int T3=0,T4=0;//其他定时，闹钟显示和蜂鸣器
//************************************//
unsigned char month_day[]={31,28,31,30,31,30,31,31,30,31,30,31};
unsigned char wei_ma[]={0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f};//显示位码
off=1;
if(hour==5&minute==0&second==0)
off=0;
if(set==0&adjust==0&left==0&right==0&ok==0&off==1)
{
PB_ODR=0xff;//不显示时间，省电模式
wei=1;
wei=0;
{
c_alarm=0;
T4=1500;
}
}
}
//********************时间处理函数**************************//
void time_process(void)
{
if(second>=60) //秒到60，分钟加1
second_clock();
else if(right==1) //闹钟显示
{
check_clock=0;
clock_display();
}
else if(tab==0)
{
times_bi_duan_ma(hour,minute,second);
if(ok==1)
{
hour_[c]=G*10+H;
minute_[c]=I*10+J;
second_[c]=K*10+L;
if(c==4)c=0;
else c++;
set=0;
ud=0;
lr=0;
right=0;
left=0;
ok=0;
if(lr==0)ud=&G;
if(lr==1)ud=&H;
if(lr==3)ud=&I;
if(lr==4)ud=&J;
if(lr==6)ud=&K;
if(lr==7)ud=&L;
times[lr]=duan_ma[*ud];
}
if(esc==1&ok==1)
else month++;
}
else day++;
}
}
}
}
//*******************时间数据的转换*************************//
void times_bi_duan_ma(unsigned char hour,unsigned char minute,unsigned char second)
unsigned char duan_ma[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f}; //共阴极显示段码
unsigned char sec_duan_ma[]={0xbf,0x86,0xdb,0xcf,0xe6,0xed,0xfd,0x87,0xff,0xef};
{
year=2000+A*10+B;
month=C*10+D;
day=E*10+F;
hour=G*10+H;
minute=I*10+J;
second=K*10+L;
ok=0;
esc=0;
lr=0;
ud=0;
adjust=0;
T1=100;
/* MAIN.C file
*
* Copyright (c) 2002-2005 STMicroelectronics
*/
#include "stm8s105c6.h"