PARKER液压马达F11-010-MB-CV-K-000-000-0

合集下载

parker马达f11-010-mb-cv-k-000-000-0

PARKER马达F11-010-MB-CV供应部：1385 07 13 656（林经理）0595 - 287 67920详细描述:特点从能量转换的观点来看，液压泵与液压马达是可逆工作的液压元件，向任何一种液压泵输入工作液体，都可使其变成液压马达工况；反之，当液压马达的主轴由外力矩驱动旋转时，也可变为液压泵工况。

因为它们具有同样的基本结构要素--密闭而又可以周期变化的容积和相应的配油机构。

但是，由于液压马达和液压泵的工作条件不同，对它们的性能要求也不一样，所以同类型的液压马达和液压泵之间，仍存在许多差别。

首先液压马达应能够正、反转，因而要求其内部结构对称；液压马达的转速范围需要足够大，特别对它的最低稳定转速有一定的要求。

因此，它通常都采用滚动轴承或静压滑动轴承；其次液压马达由于在输入压力油条件下工作，因而不必具备自吸能力，但需要一定的初始密封性，才能提供必要的起动转矩。

由于存在着这些差别，使得液压马达和液压泵在结构上比较相似，但不能可逆工作。

分类液压马达按其结构类型来分可以分为齿轮式、叶片式、柱塞式和其它型式。

按液压马达的额定转速分为高速和低速两大类。

额定转速高于500r/min 的属于高速液压马达，额定转速低于500r/min的属于低速液压马达。

高速液压马达的基本型式有齿轮式、螺杆式、叶片式和轴向柱塞式等。

它们的主要特点是转速较高、转动惯量小、便于启动和制动、调节(调速及换向)灵敏度高。

通常高速液压马达输出转矩不大所以又称为高速小转矩液压马达。

低速液压马达的基本型式是径向柱塞式，此外在轴向柱塞式、叶片式和齿轮式中也有低速的结构型式，低速液压马达的主要特点是排量大、体积大转速低(有时可达每分钟几转甚至零点几转)、因此可直接与工作机构连接；不需要减速装置，使传动机构大为简化，通常低速液压马达输出转矩较大，所以又称为低速大转矩液压马达。

编辑本段主要结构形式与原理叶片式液压马达由于压力油作用，受力不平衡使转子产生转矩。

液压马达

液压马达QJM系列径向柱塞式低速大扭矩液压马达，是可与各种油泵，阀以及液压福建配套组成液压传动装置。

该型马达重量轻，体积小，调速范围大，可有级变量，机械制动器可自动起闭，低速稳定性能好，工作可靠，耐冲击，效率高，寿命长等系列优点。

标准型：1QJM001-0.063 1QJM001-0.08 1QJM01-0.10 1QJM002-0.2 1QJM01-0.1 1QJM01-0.16 1QJM01-0.2 1QJM02-0.32 1QJM02-0.4 1QJMA1-0.4 1QJMA1-0.63 1QJM11-0.32 1QJM11-0.5 1QJM11-0.63 1QJM12-1.0 1QJM12-1.25 1QJM21-0.4 1QJM21-0.5 1QJM21-0.63 1QJM2 1-0.8 1QJM21-1.0 1QJM21-1.25 1QJM21-1.6 1QJM32-0.63 1QJM32-0.8 1QJM32-1.0 1QJM32-1.25 1QJM32-2.0 1QJM32-2.5 1QJM32-3.2 1QJM32-4.0 1QJM42-2.0 1QJM42- 2.5 1QJM42-3.2 1QJM42-4.0 1QJM42-4.5 1QJM52-2.5 1QJM52-3.2 1QJM52-4.0 1QJM52-5.0 1QJM52-6.3 1QJM62-4.0 1QJM62-6.3 1QJM62-8 1QJM62-10S型内控式带制动器：1QJM11-0.32S 1QJM11-0.40S 2QJM11-0.40S 1QJM11-0.5S 1QJM11-0.63 S 2QJM11-0.63S 1QJM21-0.4S 1QJM21-0.5S 1QJM21-0.63S 1QJM21-0.8S 1QJM21-1.0S 1QJM21-1.25S 1QJM21-1.6S 2QJM21-0.4S 2QJM21-0.5S 2QJM21-0.63S 2QJM21-0.8S 2QJM21-1.0S 2QJM21-1.25S 2QJM21-1.6S 1QJM32-0.63S 1QJM32-0.8S 1QJM32-1.0 S 1QJM32-1.25S 1QJM32-0.63S2 1QJM32-0.8S2 1QJM32-1.0S2 1QJM32-1.25S2 1QJM3 2-2.0S2 1QJM32-2.5S2 1QJM32-3.2S2 1QJM32-4.0S2 2QJM32-0.63S2 2QJM32-0.8S2 2QJ M32-1.0S2 2QJM32-1.25S2 2QJM32-2.0S2 2QJM32-2.5S2 2QJM32-3.2S2 2QJM32-4.0S2 1QJM42-2.0S 1QJM42-2.5S 1QJM42-3.2S 1QJM42-4.0S 1QJM42-4.5S 1QJM52-2. 5S 1QJM52-3.2S 1QJM52-4.0S 1QJM52-4.5S 1QJM52-2.5S 1QJM52-3.2S 1QJM52-5.0S 1Q JM52-4.0S 1QJM52-6.3S 2QJM32-0.63S 2QJM32-0.8S 2QJM32-1.0S 2QJM32-1.25S 2Q JM32-2.0S 2QJM32-2.5S 2QJM32-3.2S 2QJM32-4.0S 2QJM42-2.0S 2QJM42-2.5S 2QJ M42-3.2S 2QJM42-4.0S 2QJM42-4.5S 2QJM52-2.5S 2QJM52-3.2S 2QJM52-4.0S 2Q JM52-4.5S 2QJM52-2.5S 2QJM52-3.2S 2QJM52-5.0S 2QJM52-4.0S 2QJM52-6.3SSe型外控式带制动器液压马达1QJM12-0.8Se 1QJM12-1.0Se 1QJM12-1.25Se 1QJM21-0.32Se 1QJM21-0.4Se 1QJM21-0.5 Se 1QJM21-0.63Se 1QJM21-0.8 Se 1QJM21-1.0 Se 1QJM21-1.25Se 1QJM21-1.6Se 1QJM32 -0.63 Se 1QJM32-0.8Se 1QJM32-1.0Se 1QJM32-1.25 Se 1QJM32-2.0Se 1QJM32-2.5Se 1QJM32-3.2Se 1QJM32-4.0Se 1QJM42-2.0Se 1QJM42-2.5Se 1QJM42-3.2Se 1QJM42-4.0 Se 1QJM42-4.5Se 1QJM52-2.5Se 1QJM52-3.2Se 1QJM52-4.0Se 1QJM52-5.0Se 1QJ M52-6.3Se2QJM12-0.8Se 2QJM12-1.0Se 2QJM12-1.25Se 2QJM21-0.32Se 2QJM21-0.4Se 2QJM 21-0.5 Se2QJM21-0.63Se 2QJM21-0.8 Se 2QJM21-1.0 Se 2QJM21-1.25Se 2QJM21-1.6Se 2QJM32 -0.63 Se 2QJM32-0.8Se 2QJM32-1.0Se 2QJM32-1.25 Se 2QJM32-2.0Se 2QJM32-2.5Se2QJM32-3.2Se 2QJM32-4.0Se 2QJM42-2.0Se 2QJM42-2.5Se 2QJM42-3.2Se 2QJM42-4.0 Se 2QJM42-4.5Se 2QJM52-2.5Se 2QJM52-3.2Se 2QJM52-4.0Se 2QJM52-5.0Se 2QJ M52-6.3SeZ（Z3，Ze3）型支座式液压马达：1QJM001-0.063Z 1QJM001-0.08Z 1QJM01-0.10Z 1QJM002-0.2Z 1QJM002-0.32Z 1QJM002-0.4Z 1QJM11-0.32Z 1QJM11-0.04Z 1QJM11-0.05Z 1QJM11-0.63Z 1QJM12-1.0Z 1QJM12-1.25Z 1QJM21-0.4Z3 1QJM21-0.63Z3 1QJM21-0.8Z3 1QJM21-1.0 Z3 1QJM21-1.25Z3 1QJM21-1.6Z3 2QJM21-0.4Z3 2QJM21-0.63Z3 2QJM21-0.8Z3 2QJM21 -1.0Z3 2QJM21-1.25Z3 2QJM21-1.6Z3 1QJM21-0.4Ze3 1QJM21-0.63Ze3 1QJM21-0.8Ze3 1QJM21-1.0Ze3 1QJM21-1.25Ze3 1QJM21-1.6Ze3 2QJM21-0.4Ze3 2QJM21-0.63Ze3 2QJM21 -0.8Ze3 2QJM21-1.0Ze3 2QJM21-1.25Ze3 2QJM21-1.6Ze3 1QJM32-0.63Z 1QJM32-0.8Z 1QJM32-1.0Z 1QJM32-1.25Z 1QJM32-2.0Z 1QJM32-2.5Z 1QJM32-3.2Z 1QJM32-0.63Z 3 1QJM32-0.8Z3 1QJM32-1.0Z3 1QJM32-1.25Z3 1QJM32-2.0Z3 1QJM32-2.5Z3 1QJM32-3.2Z3 1QJM32-0.63Ze3 1QJM32-0.8Ze3 1QJM32-1.0Ze3 1QJM32-1.25Ze3 1QJM32-2.0Ze3 1QJM32-2.5Ze3 1QJM32-3.2Ze3 2QJM32-0.63Z 2QJM32-0.8Z 2QJM32-1.0Z 2QJM32-1. 25Z 2QJM32-2.0Z 2QJM32-2.5Z 2QJM32-3.2Z 2QJM32-0.63Z3 2QJM32-0.8Z3 2QJM32-1.0Z 3 2QJM32-1.25Z3 2QJM32-2.0Z3 2QJM32-2.5Z3 2QJM32-3.2Z3 2QJM32-0.63Ze3 2QJM32-0. 8Ze3 2QJM32-1.0Ze3 2QJM32-1.25Ze3 2QJM32-2.0Ze3 2QJM32-2.5Ze3 2QJM32-3.2Ze3 1 QJM32-4.0 Ze3 1QJM52-4.0Z 1QJM52-5.0Z 1QJM52-6.3Z 1QJM62-4.0Z 1QJM62-6.3Z 1QJM62-8Z 1QJM62-10Z 2QJM52-4.0Z 2QJM52-5.0Z 2QJM52-6.3Z 2QJM62-4.0Z 2QJM6 2-6.3Z 2QJM62-8Z 2QJM62-10ZSeZ(SeZH)型外控制动器支座式液压马达：1QJM12-0.8SeZ 1QJM12-1.0SeZ 1QJM12-1.25 SeZ 1QJ M21-0.32SeZ 1QJM21-0.4SeZ 1QJM21-0.5SeZ 1QJM21-0.63SeZ 1QJM21-0.8SeZ 1QJM21-1.0 SeZ 1QJM21-1.25SeZ 1QJM21-1.6SeZ 1QJM32-0.63 SeZ 1QJM32-0.8 SeZ 1QJM32-1.0Se Z 1QJM32-1.25SeZ 1QJM32-2.0SeZ 1QJM32-2.5SeZ 1QJM32-3.2 SeZ 1QJM32-4.0SeZ 1 QJM42-2.0 SeZ 1QJM42-2.5SeZ 1QJM42-3.2SeZ 1QJM42-4.0SeZ 1QJM42-4.5SeZ 1Q JM52-2.5SeZ 1QJM52-3.2SeZ 1QJM52-4.0SeZ 1QJM52-5.0SeZ 1QJM52-6.3SeZ 2QJM12-0.8SeZ 2QJM12-1.0SeZ 2QJM12-1.25 SeZ 2QJM21-0.32SeZ 2QJM21-0.4SeZ 2QJM21-0.5SeZ 2QJM21-0.63SeZ 2QJM21-0.8SeZ 2QJM21-1.0SeZ 2QJM21-1.25SeZ 2QJM21-1.6SeZ 2QJ M32-0.63 SeZ 2QJM32-0.8 SeZ 2QJM32-1.0SeZ 2QJM32-1.25SeZ 2QJM32-2.0SeZ 2QJM 32-2.5SeZ 2QJM32-3.2 SeZ 2QJM32-4.0SeZ 2QJM42-2.0 SeZ 2QJM42-2.5SeZ 2QJM42-3. 2SeZ 2QJM42-4.0SeZ 2QJM42-4.5SeZ 2QJM52-2.5SeZ 2QJM52-3.2SeZ 2QJM52-4.0 SeZ 2QJM52-5.0SeZ 2QJM52-6.3SeZ外五星液压马达XQM系列马达产品特点：1、采用曲轴及较低激振频率的五缸五活塞机构，保持原有的低噪音特点；2、启动扭矩大，具有良好的低速稳定性，能在很低的速度下平稳运转；3、采用平面可补偿式配油结构，可靠性好，泄漏少，维修方便，活塞和柱塞套采用密封环密封，具有很高的容积效率；4、曲轴和连杆间由滚柱支撑具有很高机械效率；旋转方向可逆，输出轴允许承受一定的径向和轴向外力；5、具有较高的功率质量比，体积重量小XQM1-63 XQM1-80 XQM1-100 XQM1-125 XQM1-160 XQM2-100 XQM2-100 XQM2-100 XQM2 -100 XQM2-150 XQM2-175 XQM2-200 XQM2-250 XQM2-280 XQM3-175 XQM3-200 XQM3-250 XQM3-300 XQM3-350 XQM3-400 XQM3-450 XQM3-500 XQM 6-400 XQM6-450 XQM6-500 XQM6-600 XQM6-700 XQM6-750 XQM6-800 XQM6-850 XQM6-900 XQM8-700 XQM8-750 XQM8- 800 XQM8-850 XQM8-900 XQM8-1000 XQM11-700XQM11-800 XQM11-900 XQM11-1000 XQM11-1100 XQM11-1200 XQM11-1300 XQM11-1400 XQM16-1400 XQM16-1600 XQM16-1800 XQM16-2000 XQM16-2400 XQM31-2500 XQM31-280 0 XQM31-3000 XQM31-3150 XQM31-3500 XQM31-4000 XQM31-5000 XQM100-6300 XQM10 0-8000 XQM100-10000 XQM100-13000 XQM160-12500 XQM160-16000XQM1-63 XQM1-80 XQM1-100 XQM1-125 XQM1-160 XQM2-100 XQM2-100 XQM2-100 XQM2 -100 XQM2-150 XQM2-175 XQM2-200 XQM2-250 XQM2-280 XQM3-175 XQM3-200 XQM3-250 XQM3-300 XQM3-350 XQM3-400 XQM3-450 XQM3-500 XQM 6-400 XQM6-450 XQM6-500 XQM6-600 XQM6-700 XQM6-750 XQM6-800 XQM6-850 XQM6-900 XQM8-700 XQM8-750 XQM8- 800 XQM8-850 XQM8-900 XQM8-1000 XQM11-700XQM11-800 XQM11-900 XQM11-1000 XQM11-1100 XQM11-1200 XQM11-1300 XQM11-1400 XQM16-1400 XQM16-1600 XQM16-1800 XQM16-2000 XQM16-2400 XQM31-2500 XQM31-280 0 XQM31-3000 XQM31-3150 XQM31-3500 XQM31-4000 XQM31-5000 XQM100-6300 XQM10 0-8000 XQM100-10000 XQM100-13000 XQM160-12500 XQM160-16000NHM1-63 NHM1-80 NHM1-100 NHM1-125 NHM1-160 NHM2-100 NHM2-100 NHM2-100 NHM2 -100 NHM2-150 NHM2-175 NHM2-200 NHM2-250 NHM2-280 NHM3-175 NHM3-200 NHM3-250 NHM3-300 NHM3-350 NHM3-400 NHM3-450 NHM3-500 NHM 6-400 NHM6-450 NHM6-500 NHM6-600 NHM6-700 NHM6-750 NHM6-800 NHM6-850 NHM6-900 NHM8-700 NHM8-750 NHM8- 800 NHM8-850 NHM8-900 NHM8-1000 NHM11-700NHM11-800 NHM11-900 NHM11-1000 NHM11-1100 NHM11-1200 NHM11-1300 NHM11-1400 NHM16-1400 NHM16-1600 NHM16-1800 NHM16-2000 NHM16-2400 NHM31-2500 NHM31-280 0 NHM31-3000 NHM31-3150 NHM31-3500 NHM31-4000 NHM31-5000 NHM100-6300 NHM10 0-8000 NHM100-10000 NHM100-13000 NHM160-12500 NHM160-16000NHM1-63 NHM1-80 NHM1-100 NHM1-125 NHM1-160 NHM2-100 NHM2-100 NHM2-100 NHM2 -100 NHM2-150 NHM2-175 NHM2-200 NHM2-250 NHM2-280 NHM3-175 NHM3-200 NHM3-250 NHM3-300 NHM3-350 NHM3-400 NHM3-450 NHM3-500 NHM 6-400 NHM6-450 NHM6-500 NHM6-600 NHM6-700 NHM6-750 NHM6-800 NHM6-850 NHM6-900 NHM8-700 NHM8-750 NHM8- 800 NHM8-850 NHM8-900 NHM8-1000 NHM11-700NHM11-800 NHM11-900 NHM11-1000 NHM11-1100 NHM11-1200 NHM11-1300 NHM11-1400 NHM16-1400 NHM16-1600 NHM16-1800 NHM16-2000 NHM16-2400 NHM31-2500 NHM31-280 0 NHM31-3000 NHM31-3150 NHM31-3500 NHM31-4000 NHM31-5000 NHM100-6300 NHM10 0-8000 NHM100-10000 NHM100-13000 NHM160-12500 NHM160-16000内五星液压马达GM05-60 GM05-75 GM05-90 GM05-110 GM05-130 GM05-150 GM05-175 GM05-200 GM1-100 GM1-150 GM1-175 GM1-200 GM1-250 GM1-300 GM1-320 GM2-200 GM2-250 GM2-30 0 GM2-350 GM2-420 GM2-500 GM2-600 GM2-630 GM3-425 GM3-500 GM3-600 GM3-700 GM3-800 GM3-900 GM3-1000 GM4-600 GM4-800 GM4-900 GM4-1000 GM4-1100 GM4-130 0MS系列马达特点：1、马达规格覆盖各应用领域，排量范围从0.2 L/r至15L/r。

派克PARKER 马达

专售进口派克马达F11需要请拨打：《150-5979（8003）》（吴工）0595/<2876—7801> （扣扣）:77-188-32-47公司的技术核心人员是许多国际和德国标准的委员会的委员，直接参与工业、建筑、医疗、交通等领域有关电气安全和测量标准的制定，这使公司具备了潜在的发展优势，并奠定了公司在低压系统漏电保护技术上的全球领先地位。

产品详细信息，欢迎来电查询！要是您想要的，我都能帮您找到，价格从优！Parker液压产品授权北京分销商。

Parker Hannifin派克汉尼汾是全球一流的运动控制公司, 致力于提供用户一流的服务. 派克是唯一能够给用户提供全方位液压，气动，和机电一体化运动控制方案的制造商之一。

派克公司气动部门，兼并了众多世界著名的气动工厂，使派克气动产品日益壮大，在气动行业中名列前茅，派克旗下的著名品牌：Atlas Automation、SchraderBellows、Telepneumatic、wilkerson、Miller、sempress、Watis、maxam、climax、invensys、ParkerKuroda、Parker TAIYO。

英格索兰气动马达150BMPE88R54-12C德国KRACHT克拉克泵KF40RF1-232-D15SPM大泵连杆瓦2P112860DERRCIK德瑞克振动筛手压油泵G0001992 COREMO科锐盟制动器E4-A1934 DERRICK交流电动机EX30-15-415-007-J DERRICK德瑞克电机EX-2.5HP415/50HZ/3PH 福伊特齿轮泵IPV6-80-101PLT迷你抛绳器M-75MOOG穆格伺服阀743F003ARiovibro测振仪Vm-63a艾默生充电模块HD22010-2诺冠减压阀20AG-X6G/PH100FMC泵M1832HD英格索兰启动马达KK6M现货MOOG伺服阀D631-102C现货GEMU双作用角座阀514-50D-137531GEMU単作用角座阀514-15D-137514 National油封456967v意大利INTERPUMP高压柱塞泵W2141现货ARCOTRONICS电容C20ALGR5680AA0K PRATISSOLI泵KLS36现货INTERPUMP高压柱塞泵W2141威格士减压阀XG2V-6BW-10罗斯蒙特差压变送器3051CD2A22A1AB4M5罗斯蒙特压力变送器3051GP3A2B21AB4M5 Calpeda科沛达水泵TP100EUFM流量开关MN-DSF320LM-16FTCSI50RF现货CAT猫牌柱塞泵5CP3120CSSCAT猫牌柱塞泵5CP3120CSSG1丹佛斯油泵VBHM-D-4-10现货FLOJET泵04300-242现货NUFLO流量计9A-100009536ASCO电磁阀EF8320G202/24DC霍纳编码器HIS1017252现货TROMBETTA启动器NO684-1261-212马勒过滤器PI3405-012现货NOP油泵TOP-206HB马祖奇齿轮泵ALP4A-D-130-S1英格索兰气动马达ST400ICAR72贺德克压力传感器EDS1791P-600-009Parker PUMP and Motor DivisionPart No.3785609TYPE SER NO.F12-090-MF-IV-K-000-000-0Parker PUMP and Motor DivisionPart No.3785518TYPE SER NO.F12-090-MF-IV-D-000-000-0Parker PUMP and Motor DivisionPart No.3780784TYPE SER NO.F12-080-MS-SV-T-000-000-0Parker PUMP and Motor DivisionPart No.3780767TYPE SER NO.F12-080-MF-IV-K-000-000-0Parker PUMP and Motor DivisionPart No.3799989TYPE SER NO.F12-060-MF-IV-K-000-000-0Parker PUMP and Motor DivisionPart No.3799988TYPE SER NO.F12-060-MF-IV-D-000-000-0Parker PUMP and Motor DivisionPart No.3799999TYPE SER NO.F11 060 MS SV T 000Parker PUMP and Motor DivisionPart No.3703665TYPE SER NO.F11 005 MB CN K 000F12-060-MS-SV-T-000液压加气马达CNG加气站泉州双环专业供应派克Parker马达，型号齐全。

斜轴式轴向柱塞定量液压泵马达 F11 F12 系列说明书

/马达/pmde2Parker HanniﬁnPump & Motor Division Europe Trollhättan, Sweden液压泵/马达F11/F12 系列样本 MSG30-8249/CN换算系数1 kg ..............................................................................2.20 lb 1 N .............................................................................0.225 lbf 1 Nm .....................................................................0.738 lbf ft 1 bar ..........................................................................14.5 psi 1 l .................................................................0.264 US gallon 1 cm 3 ...................................................................0.061 cu in 1 mm ..........................................................................0.039 in 1°C ..........................................................................5/9(°F-32)1 kW ............................................................................1.34 hp换算系数1 lb ............................................................................0.454 kg 1 lbf .............................................................................4.448 N 1 lbf ft .....................................................................1.356 Nm 1 psi ..................................................................0.068948 bar 1 US gallon .................................................................3.785 l 1 cu in .................................................................16.387 cm 31 in ............................................................................25.4 mm 1°F .........................................................................9/5°C + 321 hp ........................................................................0.7457 kW扭矩 (M)M =[Nm]液压马达基本公式流量 (q)q = [l/min]功率 (P) P = [kW]D x n1000 x ηv D x Δp x ηhm63q x Δp x ηt600D - 排量 [cm 3/rev] n - 轴转速 [rpm] ηv - 容积效率Δp - 进油口和出油口之间的压差 [bar] ηhm - 机械效率 ηt - 总效率(ηt = ηv x ηhm )扭矩 (M)M = [Nm]液压泵基本公式流量 (q)q = [l/min]功率 (P)P = [kW]D x n x ηv1000 D x Δp63 x ηhmq x Δp600 x ηtD - 排量 [cm 3/rev] n - 轴转速 [rpm] ηv - 容积效率Δp - 进油口和出油口之间的压差 [bar] ηhm - 机械效率 ηt - 总效率(ηt = ηv x ηhm )销售条件本样本中的各种产品均由派克汉尼汾公司及其子公司和授权经销商销售。

进口柱塞泵马达液压原理图集锦之6 派克PARKER

第六部,派克PARKER液压柱塞泵马达PV系列柱塞泵PV 系列带标准压力补偿器的泵，代号F*S带负荷传感补偿器的泵，代号FFC PV 系列带功率补偿器的泵，代号*LB PV系列带电液排量控制的泵，代号*PV PV系列压力补偿器 PV系列标准的压力补偿器根据系统的实际需要调节泵的排量，以保持恒定的压力。

只要泵出口P的压力比所设定的压力低(用补偿器弹簧预设定)，补偿器阀的工作口A就联接到壳体泄油，活塞面积处卸荷。

复位弹簧和在环形面积处的系统压力保持泵在全排量状态。

当系统压力达到设定压力时，补偿器阀联接P1口到A口，建立变量活塞处的压力，引起泵的斜盘角度变小。

泵的排量得到控制，以达到系统要求的排量对标准的压力补偿器,压力是直接在补偿器弹簧处设定,而远程压力补偿器的设定可以藉助联接到先导口PP的任何适当的先导压力阀来完成。

先导供油流量是内部通过阀的滑阀供油。

先导流量是1-1.5 l/min。

先导阀可以远程地距泵一定距离安装。

这样可以使压力的设定在例如机器的控制板处进行。

远程压力补偿器典型地比标准的压力补偿器更快和更精确地响应，并能解决标准压力补偿器在临介的应用场合可能发生的不稳定问题。

压力先导阀还可以电子控制(比例压力阀)或与方向控制阀组合以用做低压的待机状态。

远程压力补偿器的FR1型在其顶部提供NG6界面， DIN24340 (CETOP 03 在RP35H, NFPA D03)。

此接口可以允许直接安装先导阀。

除手动或电液操纵的阀之外，也可能安装多级压力补偿器。

派克公司提供各种各样的这种补偿器附属件，可直接安装的。

所有远程压力补偿器工厂设定好15 bar 的压差。

以此设定，泵出口的控制的压力高於由先导阀控制的压力。

负载传感补偿器有外部的先导压力供给。

工厂设定压差是 10 bar，到补偿器的输入信号是在主流管路上阻尼器的压差。

负载传感补偿器主要是代表泵输出流量的控制，因为补偿器保持在主流管线上阻尼器的压降为恒值。

各种型号液压产品介绍

目前宁波北仑卓玛液压机械有限公司可成熟替换的产品如下：德国力士乐REXROTH MCR系列液压马达、GFT系列减速机等法国波克兰POCLAIN MS系列柱塞液压马达及车轮式马达斯达弗STAFFA HMB、HMC系列五星液压马达戴纳密克DINAMIC 卷扬机(液压绞车)、减速机丹佛斯DANFOS OMP\OMR\OMS\OMV\OMT等等摆线式液压马达意大利SAI GM系列低速大扭矩液压马达DENISON CALZONI(丹尼逊、卡桑尼) MR、MRE等系列低速大扭矩液压马达(五星马达) PARKER(派克)、WHITE(怀特)、EA TON(伊顿) TG、TE、2K、6K等摆线式液压马达日本川崎Kawasaki重工 SX、HMKB、HMKC等系列液压马达(五星马达)意大利罗西ROSSI减速机 RCE系列等直角轴式减速机意大利布雷维尼(Brevini) 行星减速机、液压绞车等邦飞利(bonfiglioli) 行星减速机等波克兰乳化液马达 SP,HSP乳化液马达/宁波北仑卓玛液压机械有限公司是专业生产低速大扭矩液压马达及减速机、液压绞车的制造商。

主要产品有：QJM系列球塞式液压马达，NHM系列五星液压马达，BM系列摆线式液压马达，GM系列摆缸式液压马达，提升液压绞车，牵引液压绞车，液压绞盘，液压回转(传动)装置，车轮式液压马达，行走马达，MS 柱塞式液压马达，履带底盘，承接全套液压系统的设计与制造。

且成熟替换国外知名品牌低速马达及减速机系列，产品技术成熟，供货时间快，价格实惠。

广泛应用于建筑工程机械，起重运输机械，冶金重型机械，石油勘探设备，煤矿机械，船舶设备，机床，地质勘探设备等各个行业领域。

液压马达可直接驱动履带行走，轨道轮子驱动，各种回转提升，勘探钻孔，带式输送，物料搅拌，路面切割，船舶起锚等等目前可成熟替换的产品如下：德国力士乐REXROTH MCR系列液压马达、GFT系列减速机等法国波克兰POCLAIN MS系列柱塞液压马达及车轮式马达斯达弗STAFFA HMB、HMC系列五星液压马达戴纳密克DINAMIC 卷扬机(液压绞车)、减速机丹佛斯DANFOS OMP\OMR\OMS\OMV\OMT等等摆线式液压马达意大利SAI GM系列低速大扭矩液压马达DENISON CALZONI(丹尼逊、卡桑尼) MR、MRE等系列低速大扭矩液压马达(五星马达) PARKER(派克)、WHITE(怀特)、EATON(伊顿) TG、TE、2K、6K等摆线式液压马达日本川崎Kawasaki重工SX、HMKB、HMKC等系列液压马达(五星马达) 意大利罗西ROSSI减速机RCE系列等直角轴式减速机意大利布雷维尼(Brevini) 行星减速机、液压绞车等邦飞利(bonfiglioli) 行星减速机等波兰乳化液马达SP,HSP乳化液马达主营：液压马达，行星减速机，液压绞车，液压回转装置，液压系统，行走马达摆线液压马达类：专业生产各种类型液压马达和替换进口马达丹佛斯DANFOSS，型号液压马达完全替换(OMP,OH,OMR,DS,OMH,OMEW)(OMS,OMT,OMV) 丹佛斯DANFOSS液压马达1.微型马达(OML，OMM),中型马达(OMP，OH,OMR,DS,OMH,OMEW),大型马达(OMS,OMT,OMV),40系列轴向柱塞马达 ,90系列轴向柱塞马达 ,L型和K型变量马达 ,TM系列轴向柱塞马达,DCM系列径向柱塞马达,轴向柱塞二位LV马达,51及51-1系列斜轴变量马达 ,径向柱塞马达(DCM系列),摆线马达,我们提供 1600 多种不同的液压马达，并按型号、外形及尺寸分类（包括不同规格的输出轴）进行分类。

派克液压中文样本

液压注意 – 用户方责任错误或不当地选择或使用本样本或有关资料阐述的产品，可能会导致人生伤亡及财产损失！本样本以及其它由派克汉尼汾公司及其子公司、销售公司与授权分销商所提供的资料，仅供用户专业技术人员在对产品和系统的选型进行深入调查考证时参考。

用户应全面分析自身设备的运行工况、适用的工业标准，并仔细查阅现行的样本，以详细地了解产品及系统的相关信息，通过自己的分析和试验，对产品及系统的独立的最终选择负责，确保能满足自身设备的所有性能、耐用性、维修型、安全性以及预警功能等要求。

对于派克或其子公司或授权分销商而言，应负责按用户提供的技术资料和规范，选择和提供适当的元件或系统，而用户则应负责确定这些技术资料和规范对其设备的所有运行工况和能合理预见的使用工况是否充分和准确。

目录目录页次概述 1 订货代号 2 技术参数 4 变量控制器 5 控制选项 “C”, 压力限定(恒压)变量控制器 5 控制选项 “L”, 负载传感及压力限定变量控制器 6 控制选项 “AM”, 带遥控口的标准型先导式压力限定变量控制器 7 控制选项 “AN”, 带ISO 4401 NG06先导阀安装界面的先导式压力限定变量控制器 8 控制选项 “AE”及“AF”, 带电磁比例调节的先导式压力限定变量控制器 9 控制选项 “AMT”, “ALT”及“LOT”, 带最高压力限定的扭矩限定(恒功率)变量控制器 10 P1性能特性 11典型流量特性 11 典型总效率特性 13 典型轴输入功率特性 15 典型噪声特性 18 典型轴承寿命 20 PD性能特性 22典型流量特性 22 典型总效率特性 24 典型轴输入功率特性 26 典型噪声特性 29 典型轴承寿命 31 安装尺寸 33 P1/PD 018 33 P1/PD 028 36 P1/PD 045 40 P1/PD 060 44 P1/PD 075 49 P1/PD 100 54 P1/PD 140 59 变量控制器安装尺寸 65 可提供的扩展的液压产品 75派克汉尼汾备记派克汉尼汾概述简介, 优点派克汉尼汾简介 • 开式回路用轴向柱塞式变量液压泵 • 中压，连续工作压力280 bar • 高驱动转速型，适用于行走机械；低噪声型，适用于工业应用 • 静音及高效的控制效能优点 • 总结构尺寸紧凑 • 低噪声• 流量脉动小，进一步降低噪声• 采用弹性密封，不使用密封垫，从而避免外泄漏的产生• 总效率高，功耗小，减小发热• 采用带无泄漏调节装的简单变量控制器 • 符合SAE 及ISO 标准的安装法兰及油口 • 采用圆锥滚柱轴承，使用寿命长 • 全功率后驱动能力• 后部或侧面油口配置可选• 泄油口的配置对水平安装及驱动轴向上垂直安装均适用• 带有最大及最小排量调节选项 • 具有壳体至吸口单向阀选项，可延长轴封寿命 • 使用、维修方便脉动容腔技术下列图表所示为侧向油口配置P1/PD 18, 28及45泵采用 “脉动容腔” 技术的效果，脉动容腔可降低泵出口处的压力脉动幅值40-60%，这样，无需增加成本来加装噪声缓冲元件，便可大大降低液压系统的整体噪声，P1系列 PD 系列出口压力p / bar平均压力脉动 / b a rP1 045出口压力脉动2600 rpm 无脉动容腔2600 rpm 带脉动容腔订货代号18 ml, 28 ml, 45ml派克汉尼汾P 类型 01 驱动轴转向R 5密封材料E 油口配置0 壳体-吸口单向阀 0 排量调节 018 排量 S 安装法兰及油口 S 轴封 M 应用范围A 设计系列0 通轴驱动选项 C0控制选项0附加控制选项 00油漆 00修改代号系列 P D * 仅适用于045排量, “S”型安装法兰及油口00 标准型, 无修改M2 按要求修改代号修改代号 * 适用于028及045排量 ** 仅适用于045排量代号设计系列 A 现行设计系列5 氟碳橡胶 (FPM) 代号密封材料 A 82-2 SAE A M33x2 M27x2 BSPP 1/4”, 3/8” 101-2 SAE B M42x2 M27x2 BSPP 1/4”, 1/2” 101-2SAE B M48x2M33x2Ø38/25DN51/25BSPP 1/4”, 1/2”B ISO M33x2 M27x2 BSPP 1/4”,3/8”ISO M42x2 M27x2 BSPP 1/4”, 1/2” ISO M48x2M33x2Ø38/25DN51/25BSPP 1/4”, 1/2”代号 018排量 028排量 045排量安装法兰及油口安装法兰螺纹油口辅助油口安装法兰螺纹油口辅助油口安装法兰螺纹油口法兰油口辅助油口 S 82-2 SAE A SAE 16/12 SAE 4/6 101-2 SAE B SAE 20/12 SAE 4/8 101-2SAE B SAE 24/16Ø38/2561系列SAE 4/10M ISO M33x2 M27x2 M12x1.5 M16x1.5 ISO M42x2 M27x2 M12x1.5 M22x1.5 ISO M48x2M33x2Ø38/25DN51/25M12x1.5M22x1.5代号 018驱动轴 028驱动轴 045驱动轴 01 SAE A 11T 花键SAE B-B 15T 花键 SAE B-B 15T 花键02 SAE 19-1平键Ø0.75” SAE B-B 平键Ø1” SAE B-B 平键Ø1” 08— SAE B 13T 花键 SAE B 13T 花键 04 ISO/DIN 平键, Ø20ISO/DIN 平键, Ø25ISO/DIN 平键, Ø25 06 SAE A 9T 花键— — PD 工业液压用代号系列P1 行走机械用代号排量 018 18 ml/rev (1.10 in 3/rev) 028 28 ml/rev (1.71 in 3/rev) 045 45 ml/rev (2.75 in 3/rev) 代号类型 P 开式回路用变量柱塞泵 U*通用代号应用范围 S 工业液压 (PD) M 行走机械 (P1) R 顺时针 (右转)L 逆时针 (左转)代号转向代号轴封 S 单唇轴封 * 并不具有控制功能，仅在运输时予以防护，详情见第7页的控制说明。

液压泵液压缸液压马达的型号及参数以及精编版

液压、气动一、液压传动1、理解：液压传动是以流体为工作介质进行能量传递的传动方式。

2、组成原件1、把机械能变换为液体（主要是油）能量（主要是压力能）的液压泵2 、调节、控制压力能的液压控制阀3、把压力能转换为机械能的液压执行器（液压马达、液压缸、液压摆动马达）4 、传递压力能和液体本身调整所必需的液压辅件液压系统的形式3、部分元件规格及参数衡力，磨损严重，泄漏较大。

叶片泵：分为双作用叶片泵和单作用叶片泵。

这种泵流量均匀、运转平稳、噪音小、作压力和容积效率比齿轮泵高、结构比齿轮泵复杂。

柱塞泵：容积效率高、泄漏小、可在高压下工作、大多用於大功率液压系统；但结构复杂，材料和加工精度要求高、价格贵、对油的清洁度要求高。

一般在齿轮泵和叶片泵不能满足要求时才用柱塞泵。

还有一些其他形式的液压泵，如螺杆泵等，但应用不如上述3种普遍。

适用工况和应用举例【KCB/2CY型齿轮油泵】工作原理：2CY、KCB齿轮式输油泵在泵体中装有一对回转齿轮，一个主动，一个被动，依靠两齿轮的相互啮合，把泵内的整个工作腔分两个独立的部分。

A为入吸腔，B为排出腔。

泵运转时主动齿轮带动被动齿轮旋转，当齿化从啮合到脱开时在吸入侧(A)就形成局部真空，液体被吸入。

被吸入的液体充满齿轮的各个齿谷而带到排出侧(B)，齿轮进入啮合时液体被挤出，形成高压液体并经泵的排出口排出泵外。

KCB/2Y型齿轮油泵型号参数和安装尺寸如下：【KCB/2CY型齿轮油泵】性能参数：【KCB/2CY型齿轮油泵】安装尺寸图：KCB18.3~83.3与2CY1.1~5安装尺寸图电动机KCB200~960与2CY8~150安装尺寸图双联叶片泵（两个单级泵并联组成，有多种规格）以下为YYB—AA型YYB—AB型ηη(2)液压马达：是把液体的压力能转换为机械能的装置分类：1、按照额定转速选择：分为高度和低速两大类，高速液压马达的基本形式有齿轮式、螺杆式、叶片式和轴向柱塞式等，高速液压马达主要具有转速较高，转动惯性小，便于启动和制动，调速和换向的灵敏度高。

美国派克Parker安装调试与液压油选用说明

修理或更换供油泵校验电机的转速（也可见液压图中的说明）安装空气滤清器重新加油。当设备到极限换油的油位时：只能补充至最大和最小油位之间
优化设计将回油管路布设在液面以下
用正确的液压油进行替换，也可以与设备的供应商进行磋商更换密封圈
拧紧或更换螺栓连接
更换软管设备排气
Inst_5-8_gb.PM6.5MM
电气连接使用的电流形式和电压正确吗？ z 电机检查可使用的电压与电机型号标牌是否一致。 z 电磁铁电流形式（交流或直流）和电压对吗？检查元件的参数标牌。
当为电控阀时，方向的选择直接由电控系统来完成。注意：在电磁阀上的应急手动控制装置只能用相应的工具来操纵。 z 比例阀最初只能给比例-压力、流量和换向阀加小一些的电信号给定值。 z 蓄能器如果在设备中装有蓄能器的话，那么必须对其充气压力是否正确进行校验或对其进行充气。因此，需要相应的检测和充气装置。注意：原则上讲，出于安全的原因，蓄能器只能被充入氮气。在液压回路图中应在工作压力上对调整的充气压力进行说明。一般为：充气压力=最低的工作压力 × 0.9 检查或充气之后通过截止阀将蓄能器与系统接通。
安全技术说明液压设备是这样设计和制造的，就是当可能发生故障时，操作人员不能受到伤害。它的前提条件是：各种不同类型的泵和元件必须在其允许的工作压力范围内进行工作。对设备和电气控制系统可能造成的损害必须被限制在最小的范围之内。液压蓄能器原则上只能用氮气进行充气。液压蓄能器的检测证明和安全阀应一同供货并且应单独保管。如果需要的话，这些应提交给安全委托方。不能拆卸安全阀上的铅封。请注意提示牌。蓄能器的压力-升-乘积 < 200时，必须由专业人员来验收；当 > 200时，必须由权威专家（TUV）来验收。相对于本说明来讲，应首先遵循按照蓄能器供应商所提供的详细的安装调试说明。注意：大于1升额定容积的液压蓄能器在运输时只能预先充入最大10 bar的压力。对压力容器进行事后的焊接只能由专业人员在其职责范围内进行。操作前应排油并打开容器盖。根据设备放置的地点，必须制定详细的措施，例如：在水源保护区必须设置油池或在高火灾危险区使用不易燃的油液。

SOLCON软启动器

SOLCON软启动器SOLCON软启动器RVS-DN390-400-230-230-3-9-L-S（询：15 8 0 5 0 6 12 13 李工）SOLCON软启动器RVS-DN390-400-230-230-3M-9-S SOLCON软启动器RVS-DN170-400-230-230-9-SSOLCON软启动器RVS-DN310-400-115-115-9-SSOLCON软启动器RVS-DN310-400-230-230-9-L-SSOLCON软启动器RVS-DN580-400-230-230-9-L-SSOLCON软启动器RVS-DN210-400-230-230-9-L-S林肯燃油泵81834P+F 传感器NBB10-30GM50-E2-V1U=10-30V J=200mALZC 电磁阀LZCLU02-P50-G1/4-024 0-50barTyco手报514.800.605.T奥莱尔冷却器B25THx60/1P-SC-S Ametek HDRZF2-400-225-NO-01TEMA接头7520 G3/4 WABCO气阀4630380120 CONVUM真空发生器CV-15HR帕斯菲达有机硫计量泵备件包DC2BYFP 71CFRAME序列号0412071158备件包型号NLK020FPAUTRONICA探头BDH-200AUTRONICAHC300PL（5861-011.5300）LORD 减震器AM003-15AM003-11AMETEK200887001阿普顿防爆插头?ECP-20232\AC240V\20A\ExdⅡBT4??AQUA-TERRA?快速接头SKF注油枪TLGH1VALTEK气动放大器3/4NPTS/N:076407.999.000 POCLAIN?马达MS18-2-121-A18-1320-0000派克油泵PV180R1K1TINMMC Burkert电磁阀???00041137 ALEMITE?黄油嘴1610-BL1688-B?PALL?滤芯?UE319AN20H捷斯曼?绞车手柄V62LPM-04Z+04Z-A140W1012981-010V62RM-04Z+04Z-A140?W1012981-020威伯科9700514240Orion电导电极013016MD参比电极210058摩菲振动开关VS2GEA 指示器NMR1-24VDC 10055291 EGONHARIG火焰探测器?FL/SS7510/35MIL AMETEK冷镜式水露点分析仪13-1200-L-N-2?滤芯??CHC08435? Computronic充电器?SM2?250A2409DIN CAT锌棒?6L2284?CAT电机油?D6A2C4? AMETEK?加热炉?70409SE锆管?75250SESPM?密封脂?P40230?PARKERF11-005-MB-CV-K209-000-0??5台?? REXNORD挡泥圈?4723097密封?2921417burkert8640?阀岛?707533?? ENCON洗眼器?PLS724\BS? EN?15154-4-2009SPECK泵?NP10/15-140斯贝克修理包?14.0732?阀组件?00.4687派克油泵?F1-081-R-000STALL插头\8579/12－406 STALL?63A?380V ?????????多林格滤芯?95-151AUTRONICA探头??BHH-500/N斯贝克?泵NP10/15-140C?左轴B类NOLAT插头 50304229DITTMER温度变送器 eng6965088351温度变送器 eng6965088350派克滤芯2020PM 2个丹尼逊T6CC0140081R01C111NTN轴承22336BD1进口铜调压阀不锈钢蓄能器配套CAT泵3CP1130CAT 泵3CP1130AUTRONICA 探测器116-5861-011.5300利达时接头26SFKK08MXX26KAKK08MPXskylotec安全带 G-0050-IW双勾绳 L-0399-1.5Climax800XH-K (Part # 3256666)泰科烟雾探测器MR601TEX HYDRAULIC液压泵P75B378BEOL22-11 SPECK泵P11/13-100调压阀UL221/100H蓄能器DS270/46PMA 温度控制器KS40-108-9090E-D51Puls-Power电源ML50.102VIKING救生衣PV9320（红色，带面罩）DOSEURO计量泵FM-50N-50/H--11 EGONHARIG火焰探测器FL/SS7510/35MIL Bosch 0460426449GIMAX灯管和灯罩BDMM36240E+HPH分析仪电极CPS11-2AA2ESACPS71D-7TB21CPS11D-7BA21AMETEK石英窗密封圈202813026博世雨刮支架3398100478 AMETEK密封圈42005JE帕斯菲达计量泵LPH6EB-PTC3-XXX 18.9LCLA-VAL阀100-023个单价687美元STARTWELL柴油机储能启动装置SDA077PVORTEX屏柜制冷器7515KOBELT7173-0003A帕斯菲达隔膜L0301300-THYKCT电磁阀BD520-BD0.15-0.8MPa 直流24V哈威SCP012RNDL4L35S0S000猫牌661D猫牌密封套装661DNUFLO流量计流量包9A-100003474 koppen&lethem传感器8372816。

CONSILIUM康士廉温度探头

CONSILIUM康士廉温度探头底座联系：0595-6829 5304（小尤）150595 11360瑞典康士廉集团是在瑞典上市的高科技企业。

我们开发、生产及销售以下先进的船用设备系统：导航：ConsiliumSelesmar 雷达及电子海图(ECDIS)；SAL计程仪；Consilium 航行数据记录仪(VDR)。

安全：Salwico 火灾探测报警系统；Salwico 可燃气体探测报警系统。

环保：Salwico 废气(NOx-SO2) 排放监控系统。

我们的产品可用在各类船舶上并销售到世界各地的船厂、船东、设计公司和海军等。

我们的火灾探测报警系统也在火车和地铁车上应用。

Consilium 有一个又强又完整的全球售后服务网络。

为了提供良好的售后服务给客户们，Consilium 集团于中国和世界上另外十六个国家均设立了分公司。

我们也在40多个国家有销售及服务代理。

Consilium是一家通过IS09001质量标准认证的厂家，我们的产品均通过所有船级社的认可。

常用型号：CONSILIUM康士廉消防用品感烟探头NS-I-ISCONSILIUM康士廉温度探头:TDT-2k康士廉进口N1115 SMOKE DETECT感烟探头DOS3感温感烟复合NS-AOHS康士廉进口N1115 DOS3 SMOKEDETECT烟雾探头CONSILIUM康士廉感烟探头RDJ-2康士廉感温探头TDT-2CONSILIUM康士廉烟/感温一体化探头N11242NS-AOHSCONSILIUM康士廉火焰探头N11121NS-AUV CONSILIUM康士廉手动发讯按钮45174 .COLOUR:BLUELKA05CONSILIUM 康士廉系统头底座46915SPB-1CONSILIUM康士廉防水式火警报警按钮NO.n11305(GB)康士廉探火失火报警系统CS4000康士廉烟火探测报警装置CS4000CONSILIUM火灾探测器NS-CP/IP55康士廉火灾复示器MN4000康士廉防水感温感烟复合探头（带地址码）NS-AOHS(84度）康士廉防水感温探头NS-AH/CS(84度)康士廉感温SWM-1KL/IS(57度本安型T1)康仕廉CONSILIUM MCP-A/N1311 NS-ACP康士廉感烟探头（带地址编码）NS-AOS康士廉防爆感温探头NS-AOS一、油田机械连续油管车：海迪瑞克HYDRA RIG、国民公司、西方公司WESTERN、哈里伯顿HALLIBURTON；压裂车：肯沃斯KENWORTH、加拿大皇冠、万国INTERNATIONAL、帕卡PACCAR；及其配套设备：卡特彼勒CATERPILLAR、、底特律、MTU柴油机及零配件；艾里逊ALLISON、克拉克CLARK、伊顿EATON、采埃孚ZF变速箱及配件；库伯COOPER刹车片、STEWART&STEUENSONDANA取力器、PTT连续油管雷邦德、道威尔、威德福、艾迪克、GE公司等美洲公司产品；二、世界名牌发电机组卡特彼勒CATERPILLAR、康明斯CUMMINS、底特律DETROIT、道依茨DEUTZ、沃尔沃VOLVO、伊蒙妮莎HIMOINSA、珀金斯PERKINS、瑞典富豪、依维柯、奥南、泽滕、瓦格厦WAUKESH、国际久保田、曼哈姆MWM；三、工矿设备小松、特雷克斯TEREX、卡特CAT、汤姆洛克、VOLVO、阿特拉斯四、液压总汇：胜凡SUNFAB、力士乐REXROTH、派克汉尼PARKER、丹尼逊DENISON、伊顿-威格仕（EATON.VICKERS）、油研YUKEN、萨奥、麦塔雷斯MEIARIS、WABCO、ATOS、ROSS、柯莫索COMMERCIAL、博士-力士乐BOSCH-REXROTH、萨澳-桑斯川特SAUER-SUNDSTRAND、柯莫索COMMERCIAL、泊姆克PERMCO、丹尼逊DENISON五、常用件工程轮胎：米其林、横滨、固特异、普利司通、新倍力、正新；专业滤芯：Donaldson、Dana、Fleetguard、MANN、MAHLE、ARGO、LUBER-FINER、FILTREC；配套轴承：TIMKEN、TOR、RIN、GTON、RBC、NTN、NSK、TOYO、SBC、FAE、AGE、ASK；名牌皮带：GATES、BANDO、MALEEP、OPTIBELT、HANCHANG、DAYCO；密封件：CR、NOK、NAK、BOSCH、MFC；泉州市双环贸易发展有限公司系双环（香港）国际控股集团有限公司设立于大陆的子公司，是一家专业从事油田设备、工程机械、矿山机械、港口机械、能源发电机设备等成套设备供应及零配件批发的进出口公司。

Parker LCB系列线性电机说明书

L C B S e r i e sContentsOverview....................................................................................................70Specifications............................................................................................73T echnical.Data .LCB040.Loading/Wear........................................................................74.LCB060.Loading/Wear........................................................................76.Drive.Torque.Requirements................................................................78.Deflection............................................................................................79Dimensions................................................................................................80Options......................................................................................................82Accessories .Sliding.Blocks......................................................................................83.External.Bumpers...............................................................................83.Electrical.Limit.Switches.....................................................................84.Clamping.Profiles................................................................................85.T rmation .Basic.Unit............................................................................................87.Intermediate.Drive.Shaft.....................................................................88Application.Fax.Form (89)LCB Compact Linear ActuatorParker.Hannifin.CorporationActuator.DivisionWadsworth,A Phone:.1-866-P ARK-ACTemail:*************************website:/actuatorL C B S e r i e s70Actuator Division1-866-PARK-ACTThe LCB SeriesLCB Markets and ApplicationsThe.LCB.series.rodless.actuator.has.proven.to.be.a.robust.and.reliable.solution.for.numerous.motion.control.appli-cations.across.many.markets.and.industries...Listed.below.are.some.examples.of.where.and.how.the.LCB.series.rodless.actuator.has.been.successfully.applied..............The.LCB.series.of.linear.actuators.incorporates.a.low.friction,.dry.running.sliding.bearing.carriage.that.provides.long.and.reliable.travel.life.even.at.100%.duty.cycle...The.low.mass.of.the.carriage.and.steel.reinforced.timing.belt.design.allows.for.very.high.acceleration.and.velocity...With.accelerations.exceeding.2G’s.and.speeds.up.to.8.m/s,parable.throughput.to.linear.motors.at.a.fraction.of.the.cost..The.simple,bined.with.Parker.motors.and.controls,.the.LCB.offers.a.fully.programmable,.high.performance.solution.at.a.great.value.......The LCB design means . . . .•.Increased.throughput.–.100%.Duty.Cycle.Operation•.High.acceleration.(20.m/s 2).and.velocity.(8.m/s)•.T wo.profile.sizes.(LCB040.&.LCB060).•.Dry.running,.low.friction.bearings.provide.long,.reliable.life•pared.to.other.bearing.type•.High.static.load.capacity.-.Well.suited.to.withstand.pressing..forces.at.standstill.......•.Short,.medium,.and.long.carriages.available.to.optimize..moment.load.capacity.L C B S e r i e s71Actuator Division1-866-PARK-ACT1 Guide The.external.sliding.guide.is.incorpo-rated.as.part.of.the.aluminum.profile..It.is.unnecessary.to.adjust.two.separate.guiding.rails..The.guide.is.maintenance.free.with.integrated.dry-film.lubricant.2 Sliding CarriageThe.sliding.carriage.is.available.in.three.lengths..With.a.longer.sliding.carriage,.there.is.greater.distance.between.the.sliding.blocks..This.improves.the.load.capacity.with.respect.to.yaw.and.pitch.moments.3 Sliding BlocksLow.friction.sliding.blocks.provide.smooth.motion.throughout.travel..Sliding.blocks.can.be.easily.changed.within.2.minutes.without.detensioning.the.timing.belt.4 Spacer PlatesThe.timing.belt.of.the.LCB040.is.ten-sioned.directly.at.the.sliding.carriage.by.means.of.spacer.plates.5 Tensioning StationOn.the.LCB060,.the.timing.belt.is.tensioned.via.tensioning.screws.at.the.tensioning.station.6 ProfileThe.profile.is.available.in.two.sizes.and.resistant.to.flexing..The.closed.profile.provides.high.torsional.stiffness..Profiles.are.dirt.tolerant,pact.design.means.minimum.installation.space.is.required.Construction7 Timing Belt DriveHigh.stiffness.and.accuracy.are.provided.by.the.generously-dimensioned.timing.belt.8 Drive Options•..Linear.actuator.with.free.shaft.end.•..Coupling.(9).&.gearbox.•..Coupling,.gearbox.&.motor.•..Coupling.&.direct.drive.motor.(10).LCB040LCB06072Actuator Division1-866-PARK-ACTDual Axis ActuatorsFor.a.dual-axis.actuator.with.the.driveon.the.right.side,.you.need.two.LCB.basic.units:.1).the.right.unit.with.drive.option.RDN.and.2).the.left.unit.with.drive.option.RSN.For.a.dual-axis.actuator,.two.LCB.basic.units.and.a.shaft.corresponding.to.the.desired.center-distance.are.required..Parker.will.deliver.the.two.basic.units.(with.mounted.couplings.–.if.this.was.ordered).and.a.separate.shaft.kit..See.page.88.for.shaft.kit.ordering.Center Distance(from.center.line.to.center.line)For.a.dual-axis.actuator.with.the.drive.on.the.left.side,.you.need.two.LCB.basic.units:.1).the.left.unit.with.drive.option.LDN.and.2).the.right.unit.with.drive.option.LSN.L C B S e r i e s73Actuator Division1-866-PARK-ACT1...Repeatability.is.unidirectional,.achieved.under.ideal.conditions.and.slow.speeds....Actual.repeatability.may.vary.with.the.application..Operating Temperature Range0°.to.60°C.(32°.to.140°F).Available Stroke LengthsLCB Specifications74Actuator Division1-866-PARK-ACTLCB040 Life vs. LoadThe.diagrams.are.valid.solely.for.guidance.and.under.ideal.operating.conditions..The.diagrams.are.based.on.a.trapezoidal.motion.sequence.with.3.identically.long.sections.for.acceleration,.constant.travel.and.deceleration.The.diagrams.are.based.on.defined.payloads.of.1.kg..Shown.are.the.respective.mass.centroids.with.their.typical.load.arms.Actuator LifeNaturally,.the.sliding.guiding.has.already.a.slight.play.under.new.condition,.so.that.the.guiding.does.not.jam.and.the.slid-ing.carriage.moves.smoothly..The.play.is.measured.as.a.gap.for.each.slide.and.is.approx..0.1.to.0.2mm.in.normal.direction.and.at.the.sides.During.the.operation,.the.play.increases.according.to.the.loads.shown.in.the.diagrams.If.a.certain.state.of.wear.is.reached.(the.wear.limit..is.0.5mm.for.the.LCB040),.the.slides.can.be.exchanged.easily.within.a.few.minutes..After.the.exchange,ing the DiagramsLife.is.shown.for.each.length.of.carriage:.short.(S),.medium.(M).and.long.(L)..The.diagrams.can.be.interpolated.with.respect.to.lifetime.and.extrapolated.with.respect.to.load..(for.example:.halved.operational.performance.results.in.halved.wear,eage.in.km).T r a v e l (1000k m )Acceleration,m/s 2T r a v e l (1000k m )Acceleration (m/s 2)T r a v e l (1000k m )Acceleration (m/s 2)T r a v e l (1000k m )Acceleration (m/s 2)L C B S e r i e s75Actuator Division1-866-PARK-ACTT r a v e l (1000k m )Acceleration (m/s 2)T r a v e l (1000k m )Acceleration (m/s 2)T r a v e l (1000k m )Acceleration (m/s 2)T r a v e l (1000k m )Acceleration (m/s2)T r a v e l (1000k m )Acceleration (m/s 2)24681012141618T r a v e l (1000k m )Acceleration (m/s 2)76Actuator Division1-866-PARK-ACTLCB060 Life vs. LoadThe.diagrams.are.valid.solely.for.guidance.and.under.ideal.operating.conditions..The.diagrams.are.based.on.a.trapezoidal.motion.sequence.with.3.identically.long.sections.for.acceleration,.constant.travel.and.deceleration.The.diagrams.are.based.on.defined.payloads.of.5.kgs.Shown.are.the.respective.mass.centroids.with.their.typical.load.arms.Actuator LifeNaturally,.the.sliding.guiding.has.already.a.slight.play.under.new.condition,.so.that.the.guiding.does.not.jam.and.the.slid-ing.carriage.moves.smoothly..The.play.is.measured.as.a.gap.for.each.slide.and.is.approx..0.1.to.0.2mm.in.normal.direction.and.at.the.sides.During.the.operation,.the.play.increases.according.to.the.loads.shown.in.the.diagrams.If.a.certain.state.of.wear.is.reached,stest.however.at.the.wear.limit.(1.0mm.for.the.LCB060),.the.slides.can.be.exchanged.easily.within.a.few.minutes..After.the.exchange,ing the DiagramsLife.is.shown.for.each.length.of.carriage:.short.(S),.medium.(M).and.long.(L)..The.diagrams.can.be.interpolated.with.respect.to.lifetime.and.extrapolated.with.respect.to.load..(for.example:.halved.operational.performance.results.in.halved.wear,eage.in.km).T r a v e l (1000k m )Acceleration (m/s 2)T r a v e l (1000k m )Acceleration (m/s 2)T r a v e l (1000k m )Acceleration (m/s 2)T r a v e l (1000k m )Acceleration (m/s 2)78Actuator Division1-866-PARK-ACTLCB Drive Torque RequirementsThe.graphs.include.both.acceleration.and.friction.forces.(2.2)(4.4)(6.6)(8.8)(11.0)(13.2)Payload,kg (lb)D r i v i n g T o r q u e ,N m (l b -i n)(2.2)(4.4)(6.6)(8.8)(11.0)(13.2)Payload,kg (lb)3.2(28.4)2.8(24.8)2.4(21.3)2.0(17.8)1.6(14.2)1.2(10.6)0.8(7.1)0.4(3.5)0.0D r i v i n g T o r q u e ,N m (l b -i n)14(124)12(10710(89)6(53)4(36)2(18)0.0D r i v i n g T o r q u e ,N m (l b -i n )8(71)(11)(22)(33)(44)(55)(66)Payload,kg (lb)(11)(22)(33)(44)(55)(66)Payload,kg (lb)14(124)12(10710(89)6(53)4(36)2(18)0.0D r i v i n g T o r q u e ,N m (l b -i n )8(71)LCB040 – Horizontal Mounting PositionLCB040 – Vertical Mounting PositionLCB060 – Horizontal Mounting PositionLCB060 – Vertical Mounting PositionLocation of Mass Barycenter or Point of Force Application2:1.RuleDrawing.shows.example.of.the.pitch.moment..Also.valid.for.roll.and.yaw.moments.respectively.I L .=.Load.lever I T .=.Support.LeverL C B S e r i e sDeflectionGraphs.show.deflection.vs..distance.between.mountings.and.load.1.0(0.225)10.0(2.25)100.0(22.5)1000.0(225)10000.02250Distance between Mountings (SA),mmF o r c e F n ,N (l b )0.1(0.0225)Distance between Mountings (SA),mm1.0(0.225)10.0(2.25)100.0(22.5)1000.0(225)10000.02250F o r c e F n ,N (l b )0.1(0.0225)LCB040LCB060LCB040 Basic DimensionsShortcarriageSMediumcarriageMSectionA-ADetailY(enlarged)x deDetailX(enlarged)NecessforchatheplasDrivestationLSDrivestationRSDrivestationLD/RDL C B S e r i e sLCB060 Basic DimensionsD r i v e s t a t i o n L SD r i v e s t a t i o n R SD r i v e s t a t i o n L D /R DDrive Orientation (R, L)Right/left.indication.looking.from.load.attachment.plate.to.drive.module.Drive Shaft (S, D)Double.shaft.(D).models.have.an.additional.shaft.on.the.op-ed.to.attach.the.shaft.for.dual-axis.actuators.With Free Drive ShaftThe.threads.to.attach.the.coupling.are.on.the.side.defined.under."Drive.Orientation". With Attached Coupling KitThe.coupling.kit.is.always.mounted.in.the.factory..Carriage Length (S, M, L)All.sliding.carriages.have.4.sliding.blocks..On.a.longer. sliding.carriage,.the.load.bearing.capacity.for.yaw.and.pitch.moments.(My.and.Mz).is.greater.L C B S e r i e sSliding BlocksThe.sliding.block.is.a.wearing.part..Four.(4).pieces.are.required.per.linear.actuator.External BumpersA-AElectrical Limit Switches1.PNP.normally.closed.contact2.Load3.LoadLCB040LCB060L C B S e r i e sClamping Profilesed.in.conjunction.with.the.standard.load.attachment.plate.to.rapidly.install.and.attach.various.conbinations.of.linear.actuators..T ed.in.the.range.of.the.drive.or.of.the.clamping.station.LCB040LCB060T-Nuts and Boltsponents. to.the.T-slots.of.the.profile.T-NutsT-Slot Bolts and NutsDIN.562DIN.934DIN.787L C B S e r i e s1.Not.all.motor/binations..bined.with.Gearbox.Option.“0”.(no.gearbox),.this.option.is.direct.mount.with.no.flange.included.patibility.and.coding.4.Stroke.is.measured.bumper.to.bumper.Maximum Standard Stroke LengthConnecting ShaftDual-Axis Actuator DimensionsLCB040LCB060L C B S e r i e s89Actuator Division1-866-PARK-ACTFaxcompletedformto(330)*****************************************Contact Information:Name.______________________________________.Phone.__________________________Company.___________________________________.email.___________________________City,.State,.Zip._________________________________________________________________Application SketchNOTES:Please.include.the.critical.dimensions.in.your.sketch.In.order.to.achieve.the.best.solution,.it.is.important.that.you.provide.as.much.in-formation.as.possible.Motion ProfileMoves Distance (Stroke)Time Thrust or Load DwellFirst.Motion Second.Motion Third.Motion Fourth.MotionMoment LoadingX.distance._______Y.distance._______Z.distance._______Environmental Requirements1. Operating Temperature .Max._______.....Min._______2. Comtanimation .(check.one)..Particle.....Liquid.Type:._______________________3. Special Considerations .________________.._____________________________________.._____________________________________Application Requirements:1. Overall Stroke .(add.25mm.per.end.minimum).____________2. Cylinder Orientation .(check.one)...Horizontal............Inverted.......Side.Mount....Vertical...Angle:..Degree._________3. Load/Tooling Weight __________________________4. Repeatability Requirements .____________________...Unidirectional.......Bidirectional5. Is the load externally guided?.(check.one)...Y es.......No.If.yes,.how?._________________________________6. Is the actuator body supported?.(check.one)..Y es.......No.If.yes,.how?._________________________________7. Life Requirements .(cycles,.distance.or.years).Hours.per.day._________....Days.per.year._________8. Special Considerations .______________________________..___________________________________________________..___________________________________________________..___________________________________________________Please attach another sheet if more room is needed.90Actuator Division1-866-PARK-ACTMotor, Drive and Control Options:1. Motor Options .(check.all.that.apply)...Stepper.............Servo...Parker.Supplied.........Customer.Supplied.(provide.print).2. Other Options .(check.one)...Drive............Drive/Controller.......Controller3. Available Line Voltage .____________4. Switches/Sensors .(quantity).End.of.Travel._______..........Home._________5. Brake Option .(check.one)...Motor........6. Special Options ._______________________________________.____________________________________________________.____________________________________________________.____________________________________________________.____________________________________________________Actuator Type and Mounting1. Drive Orientation .(check.one)..2. Drive Shaft .(check.one)...Double.Shaft3. Carriage Style (check one): See ....Medium.Carriage.....Long.Carriage..。

Parker Hannifin Corporation 液压变速泵产品目录说明书

Piston PumpsCatalog 2600-102-1/USAQuick Reference Data ChartDisplacement Pump Delivery† Approx. Noise Levels dB(A)Input Power AtOperatingPressurePumpcc/rev @ 21 bar (300 PSI)@ Full Flow 1800 RPM (1200 RPM)1800 RPM, Max.Speed (RPM)bar (PSI)Model(In3/rev)in LPM (GPM)34 bar69 bar138 bar207 bar248 bar Displacement &(Maximum)Continuous 1200 RPM1800 RPM(500 PSI)(1000 PSI)(2000 PSI)(3000 PSI)(3600 PSI)248 bar (3600 PSI)(Maximum)PVP1616 (.98) 19.7 (5.2) 29.5 (7.8) 53 (47) 55 (50) 59 (54) 62 (56) 65 (59) 13.1 kw (17.5 hp) 3000 248 (3600) PVP2323 (1.4) 28.0 (7.4) 42.0 (11.1) 61 (57) 64 (59) 67 (63) 69 (65) 70 (65) 19.7 kw (26.5 hp) 3000 248 (3600) PVP3333 (2.0) 39.4 (10.4) 59.0 (15.6) 64 (59) 66 (59) 68 (62) 70 (64) 71 (65) 27.2 kw (36.5 hp) 3000 248 (3600) PVP4141 (2.5) 49.2 (13.0) 73.8 (19.5) 68 (60) 70 (61) 73 (65) 74 (67) 75 (69) 33.2 kw (44.5 hp) 2800 248 (3600) PVP4848 (2.9) 57.6 (15.2) 86.4 (22.8) 69 (60) 71 (62) 73 (65) 75 (68) 76 (69) 40.3 kw (54.0 hp) 2400 248 (3600)†Measured in an anechoic chamber to DIN 45635, measuring error + 2 dB(A).Fluid used: petroleum oil to ISO VG 46; temperature = 50°C (122°F).Since many variables such as mounting, tank style, plant layout, etc., effect noise levels, it cannot be assumed thatthe above readings will be equal to those in the field. The above values are for guidance in selecting the proper pump.Displacement Pump Delivery*Approx. Noise Levels dB(A)Input Power AtOperatingPressurePumpcc/rev @ 21 bar (300 PSI)@ Full Flow 1800 RPM (1200 RPM)1800 RPM, Max.Speed (RPM)bar (PSI)Model(In3/rev)in LPM (GPM)34 bar69 bar138 bar207 bar248 bar Displacement &(Maximum)Continuous 1200 RPM1800 RPM(500 PSI)(1000 PSI)(2000 PSI)(3000 PSI)(3600 PSI)248 bar (3600 PSI)(Maximum)PVP6060 (3.7) 71.9(19.0) 106.0 (28.0) 72 (68) 73 (69) 75 (70) 77 (70) 77 (70) 47.7 kw (64.0 hp) 2200 248 (3600) PVP7676 (4.6) 91.2(24.1) 134.4 (35.5) 75 (70) 75 (69) 75 (70) 77 (70) 78 (72) 61.9 kw (83.0 hp) 2200 248 (3600) PVP100100 (6.1) 120.0(31.7) 180.0 (47.5) 73 (67) 75 (69) 78 (72) 79 (75) 81 (75) 83.5 kw (112.0 hp) 1800 248 (3600) PVP140140 (8.54) 171.0(45.5) 252.0 (67.0) 80 (71) 80 (72) 80 (75) 82 (76) 84 (77) 117.8 kw (158.0 hp) 1800 248 (3600) *Since many variables such as mounting, tank style, plant layout, etc., effect noise levels, it cannot be assumed that the above readingsFeatures•High Strength Cast-Iron Housing •Fast Response Times•Two Piece Housing For Ease of Service •Metric Pilot, Shaft and Ports Available •Replaceable Bronze Clad Port Plate •Thru-Shaft Capability •Low Noise Levels•Replaceable Piston Slipper PlateControls•Pressure Compensation •Load Sensing•Horsepower Limiting•Horsepower and Load Sensing •Remote Pressure Compensation •Adjustable Maximum Volume Stop •Hi/Lo T orque (Power) Limiting (PVP 41/48, 60/76, 100/140 Only)•Low Pressure StandbySERVO COMPENSA TORPUMP CASE BIAS PLA TE BARREL PLA TE BEARING SEALGeneral DescriptionAll control is achieved by the proper positioning of the swash plate. This is achieved by a servo piston acting on one end of the swash plate working against the combined effect of the off-setting forces of the pistons and centering spring on the other end. The control spool acts as a metering valve which varies the pressure behind the servo piston.As shown in Figure 1, the amount of flow produced by the Parker Piston Pump is dependent upon the length of stroke of the pumping pistons. This length of stroke,in turn, is determined by the position of the swash plate. Maximum flow is achieved at an angle of 15-17degrees. The rotating barrel, driven by the prime mover,moves the pistons in a circular path and the piston slippers are supported hydrostatically against the face of the swash plate. When the swash plate is in a vertical position, perpendicular to the centerline of the piston barrel, there is no piston stroke and consequently no fluid displacement. When the swash plate is positioned at an angle, the pistons are forced in and out of the barrel and fluid displacement takes place.The greater the angle of the swash plate, the greater the piston stroke.BARRELPressure Compensated Control (OMIT)The swash plate angle controls the output flow of the pump. Swash plate angle is generated by the hydraulic force of the pumping pistons and the mechanical force of the swash plate bias spring.Control of the pump’s outlet flow is obtained by over-riding the force of the pumping pistons and bias spring with the hydraulic force of the servo piston by means of internal porting. Pressure is connected from the outlet port to the servo piston via a compensator spool. The compensator spool is held against the spring guide by the outlet pressure. When the outlet pressure reaches the setting of the compensator control, the compensator spool moves, allowing outlet pressure oil to be metered into the servo piston. This metered oil provides adequate force to power the servo piston and override swash plate forces. The outlet pressure causes the servo piston to move which reduces the angle of the swash plate and thereby reduces the pump’s output flow. When flow is again demanded by the system, the outlet pressure will momentarily fall allowing the compensator spool to move. This movement closes off the outlet pressure to the servo piston and vents the servo piston to case. The result of this venting allows the swash plate forces to move the swash plate angle to maximum displacement, thus responding to the demand for additional flow. Note that the compensator spring chamber is vented to the pump case via a hole internal to the compensator spool.PORTRemote Pressure Control (M)The pump swash plate actuation is identical to the standard pressure compensator but can be controlled via a remote pressure control.Remote control of the pump output pressure can be achieved by controlling the pressure at port A,Figure 3 on the compensator. Flow is metered through the orifice in the spool from outlet pressure into the spring chamber. The spring chamber pressure is limited by an external relief connected to port A. The controlled pressure at port A is sensed at the differential spring chamber. The compensator spool will move to the right when the pump outlet pressure reaches a force equal to the differential spring setting plus the controlledport pressure setting. When the spool moves to the right, outlet pressure oil is metered to the servo piston and the pump swash plate angle is controlled accordingly. With this option the pump outlet pressure can be controlled and varied from a remote location.This control also incorporates a pressure limiting feature preset at the factory. When the pressure in the differential spring chamber reaches the maximum relief setting, the dart unseats allowing the spring chamber to vent to the pump case and limits the maximum pressure attainable.Flow Control (Load Sensing) (A)Figure 4 shows a PVP pump with flow control. The control is identical to the remote pressure compensation control except for an integral orifice, a solid compensator spool and adjustable differential pressure control. Port A is connected downstream of an orifice (variable or fixed) to sense the actual working pressure required. This pressure plus the differential spring force act on the right side of the compensator spool and will urge the spool to the left until output pressure acting on the left side of the spool balances the forces. As the load increases, output pressure will increase and maintain a constant differential pressure across the orifice and thus a constant flow. Maximum pressure is limited by the internal dart setting. This setting is adjustable up to the maximum preset at the factory.PORTPressure & Power Control (H)(Not Available on PVP 60/76 and 100/140)This control option is a Torque Limiting Control, but for constant speed applications it is generally referred to as a Horsepower Control. This control works in conjunction with the Remote Pressure Compensator,control option “M”. A second pressure control device called a horsepower control block, is assembled to the main pump housing. The HP block is plumbed to one of the ports on the remote compensator via steel tubing. The control dart in the HP block and the maximum pressure compensator dart in the remote compensator are connected in parallel. What makes the control dart in the HP block different from any other external relief valve is the pressure setting is mechanically linked to the pump swashplate angle.The cracking pressure of the HP dart is generally lower than the cracking pressure of the remote compensatordifferential spring cavity is lowered allowing the compensator spool to meter system pressure in the servo piston. As the servo piston extends, it rotates the swashplate and in turn rotates the HP cam. As the cam rotates it increases the force on the HP dart control spring. As the system pressure is allowed to increase,the pump gradually reduces its stroke (flow). When the system pressure reaches the setting of the maximum pressure dart the normal action of the remote compensator takes over. If the HP control is set low enough, the pump may reach zero stroke before the system pressure ever gets a chance to open the maximum compensator dart. This should be considered when making low power settings on systems requiring high working pressures.Pressure, Power & Flow Control (C) (Not Available on PVP 60/76 and 100/140)Refer to the previous section(s) on Flow Control and Power Control. This is another case where multiple controls can be combined in parallel. Since the Power Control is just a special version of Remote Pressure Control, it can be combined with the Flow Control (Load Sense) option. The main point to remember here is that the pressure drop which is required to begin and maintain compensation comes from an external device (such as a proportional valve). This sensed pressure drop will control flow until one of the limits of the other controls has been exceeded. The pump will always respond to the lowest control setting for any given pressure. In addition to Load Sensing, Power Control,and on-pump Pressure Control, Remote Pressure Control can also be included in this parallel device package. There is a remote port on the compensator body and one on the HP Control body, either of which may be used for remote pressure control. The important concept to remember in load sense circuits is that each pressure control device in and connected to the compensator must be protected from saturation. For this reason, use only the uppermost port on the compensator for connection of the load sense line and insure that an appropriate orifice is installed. All control options using a load sense compensator spool are supplied with this orifice.PORTHi/Lo Power Control (HLM)(Available with PVP41 through PVP140 only)The graph shown below represents the flow-pressure characteristics of a Hi-Lo control for PVP pumps. There are up to four separate adjustments that must be made with the pump controls to get a particular setting, all of which influence the shape of the curve. To get the proper settings, it is very important that all pertinent information is supplied with each Hi-Lo pump ordered.As you can see from the graph below, there are two peak power points. Our intention is to have the same magnitude of power required for both peaks. Of course many combination of settings are possible but specification of the settings becomes very difficult. To make factory settings, we need to know the required flow (applicable if pump has a maximum volume stop), the shaft speed , the required Power limit , and the compensation pressure . Based on these requirements, we will adjust the low pressure set point and the reduced flow set point of the Hi-Lo control to best match the requested parameters called out on the order.Important note: As with power controls, not all combinations of flow, power, pressure, etc. are possible.The first rule is that the settings must conceptually be pressure or in a de-stroked condition can have a much lower overall efficiency than expected. The other thing to keep in mind is that the pump will require the peak power at only two points. All other operating pressures will require less than maximum power and therefore the pump will deliver less hydraulic power in the appropriate ratio based on the actual pump efficiency at those conditions.System PressureO u t l e t F l o wTypical Hi-Lo ControlFlow/Pressure CharacteristicsPORT。

西班牙CMO刀闸阀

西班牙CMO刀闸阀泉州双环贸易，西班牙CMO唯一代理所有产品提供选型，只要您需要联系我们就可以满足您的要求，为您提供全球配件解决方案。

我们只为能提高您的工作效率而服务；成为您最忠实的合作伙伴吴小姐--------1三七七 816 一二零CMO 刀闸阀/闸板阀广泛应用于制浆造纸行业，是制浆造纸行业十大阀门品牌之一。

CMO公司创建于1993年，20年来不懈的努力专注于工业刀闸阀研发、生产及制造，现已发展为世界顶级刀闸阀供应商，产品遍布全球各地。

今天CMO成为西班牙市场上两大阀门供应商之一，在西班牙拥有两个生产基地，并拥有独立的检测及质量控制车间，及物流中心。

同时，CMO还广泛应用于水行业，水处理阀门、水坝阀门、海水淡化阀门、水电厂阀门。

包括：澳大利亚、伯利兹、哥伦比亚、塞浦路斯、厄瓜多尔、冰岛等22个国家和地区，可应用于水行业的阀门主要有：对夹式单向刀闸阀A系列、对夹式双向刀闸阀AB系列、K系列、法兰式双向高压型刀闸阀D系列、止回阀R系列等。

公司供应进口机械配件，只要您提供品牌型号，均可帮您找到对应的产品。

威世应变片/CEA-13-062UR-350VISHAY威世PDT-1VISHAY威世PCT-2MVISHAY威世应变片/C2A-06-062LW-350VISHAY威世应变片/C2A-06-062LT-350VISHAY威世应变片/C2A-13-062LW-350VISHAY威世应变片/CEA-06-062UW-350VISHAY威世应变片/CEA-13-062UW-350VISHAY威世应变片/CEA-06-062UR-350VISHAY威世CPF-50VISHAY威世CPF-75VISHAY威世应变片/EA-13-125BZ-350/WVISHAY威世CPF-ASTVISHAY威世应变片/C2A-13-062LR-350VISHAY威世应变片/CEA-06-015UW-120VISHAY威世应变片/EA-06-062TZ-350/WVISHAY威世应变片/EA-06-125BZ-350/WDMIC 压力计C25BGSB16SDMIC 压力计C25BGSB14SDMIC 三向球阀BV3H-0750-SA-1111DMIC 球阀BVH-0750S-1111AZZADMIC 压力计C25BGSB09SDMIC 压力计C25BGSB16SDMIC 压力计C25BGSB14SDMIC 压力计C25BGSB14SDMIC 压力计C25BGSB14SDMIC 压力计C25BGAB03SDMIC 压力计C25BGSB05NDMIC 压力计C25BGSB06NDMIC 止回阀CVH05-0500S-22DMIC 止回阀CVH05-1250N-21DMIC 压力计C25BGSB04SDMIC 球阀BVAL-0500S-4321DMIC 压力计C25BGSB09SDMIC 压力计C25BGSB14SDMIC 止回阀CVH135-750SDMIC 球阀BVAL-0500S-4321DMIC 球阀BVAL-1000S-4321DMIC 压力计C25BGSB03SDMIC 球阀BVAL-0375S-4321DMIC 压力计C25BGSB09SDMIC 法兰FL4SU4000NSKDMIC 止回阀CVH65-750SDMIC 压力计C25BGSB04SDMIC 压力计C25BGSB14SDMIC 压力计C25BGSB09N德国A VITEQ静电植砂机振动器MVD50-4 400V 3000R/MA VITEQ振动马达*1000rpm*380V/UV G21W 序列号：0 A VITEQ 系列号K3503848-0电磁振动控制器VIBTRONIC/SCE-EN50-2A VITEQ 振捣电机MVC 50-4A VITEQ .德国A VITEQ振动器MV1/100-4 K2038288-08A VITEQ SCE-CN50-2,Nr：G德国A VITEQ振动电机6VUF18-x UVF 18 德国A VITEQ振动电机MVD50-4A VITEQ电机UVF 18 品牌：A VITEQ振动电机型号：uvf 18 德国A VITEQ电磁振动器MVC50-4 配带专用带制器A VITEQ振动电机型号uvf 18 电机SU-B50-1 A VITEQ MV1/100-4 SRA-C100/01-1-1 A VITEQ A VITEQ控制器VIBTRONIC SCE-CN50-2电磁振动器MVC 50-4 德国A VITEQ静电植砂机振动器MVD50-4 400V 3000R/M A VITEQ 振动马达*1000rpm*380V/UV G21W 序列号：0，A VITEQ 震动电机A VITEQ振动电机UVC 2,1 X - 230/400V-50HZA VITEQ电机UVC 1,5 X - 230/400V-50HZTracker数字信号显示器211-D-B-1-R力士乐油泵PVV4-1X/098RA15UMC力士乐油泵PVV4-1X/098RA15DMCSPECK斯贝克高压泵NP10/15-140SSPECK斯贝克高压泵P11/13-100 SPECK斯贝克调压阀UL221/100H MCDANIEL 压力表K6KP－K－GF MCDANIEL 压力表KEP－K－GF 小巨人水泵TE-3-MD-HC小巨人泵TE-5-MD-HCPidion 通讯器BM170-L5日本东邦VVH-2702AF 50A日本东邦VRH6-223CEF 50A BILLY吊笼用救生衣WVO-50 BILLYBILLY三片式救生衣wvo-50瑞典SUNFAB胜凡SC 047RSC 108RSC 084R5066650669现货供应，派克马达：F11-005-MB-CN-K-000-000-0F12-080-MF-IV-D-000-000-0F12-060-MF-IV-D-000-000-0OMFB液压手动泵PM70 OMFB泵DARK 60 ISOOMFB液压油泵DARK48-ISO OMFB 手动泵OMFB 2PAK-80泵OMFB柱塞泵2PAK80-ISO OMFB 泵2PAK-80OMFB液压泵NPH 61 S130 OMFB油泵意大利OMFB欧禹PM70-J OMFB 齿轮泵LTMH-112()DNH 扬声器HP-15DNH 扬声器DS(T)-100 / DH-50 DNH喇叭SAFE-10PTDNH扬声器HSP-6CTDNH 喇叭DSP-15EExmNL(T) DNH 扬声器HS-8EEXMNT DNH 扬声器HP-30(T)DNH 扬声器DSP-15EExmN(T)挪威DNH 全天侯定压式号筒扬声器DST-100DNH 防爆喇叭MODEL:DSP-25EEXMN(T)DNH 扬声器DSP-15(T)挪威DNH 5W室内壁挂扬声器SAFE-10P(T)DNH 100W号筒式扬声器DNH扬声器HS-8EEXMN(T)DNH 3W室内吸顶扬声器-BK-560T挪威DNH 全天侯定压式号筒扬声器DST-100DNH室外广播用喇叭\HS－15EEXMNT\15W/100V挪威DNH水下扬声器AQUA-30DNH 防爆扬声器5W DSP-15EExmNTDNH 扬声器壁挂式扬声器3W 型号HP-6CTDNH 扬声器防爆扬声器15W 型号DSP-15EExmNT DNH 扬声器壁挂式扬声器5W 型号HP-10TDNH 扬声器吊顶式扬声器3W 型号BPF-660IPT DNH 扬声器吸顶式扬声器5W 型号BPF-660IPT DNH 扬声器防水号角扬声器：DST-100/DH-50室外防爆扬声器\PAGA系统\DNH\HS－15 EEXMNT DNH 防爆的H-60EEXMN(T)DNH 扬声器3W室内吸顶扬声器BK-560(T)DNH 喇叭H-60EEXENTDNH 扬声器5W室内壁挂扬声器HP-6C(T)DNH的防爆扬声器HS-15EEXMNDNH 扬声器5W室外防爆扬声器HS-8 EExmN(T) DNH 扬声器DNH的防爆扬声器DSP-15EEXMMN DNH 扬声器25W室外防爆扬声器DSP25 EExmN(T) DNH 扬声器HS-15EExmNTDNH 扬声器15W室外防爆扬声器-HS15EExmNT DNH 扬声器5W室内防爆扬声器-HS8EExmNT DNH 扬声器3W室内吸顶扬声器-BK-560TDNH 扬声器5W室内壁挂扬声器-SAFE-10PTDNH 扬声器3W防水壁挂扬声器-HP-6CTDNH 扬声器5W防水吸顶扬声器-HPS-6CTDNH 扬声器3W室内吸顶扬声器-BK-560TDNH防爆扬声器,型号：HS-15EExmN(T)DNH 室内壁挂扬声器HS-15EEXMNTDNH 室内壁挂扬声器DSP-25EEXMNTDNH 室内壁挂扬声器BK56OTDNH 室内壁挂扬声器BF-620TDNH 室内壁挂扬声器HS-8EEXMNTDNH 室内壁挂扬声器SAFE-10PTDNH 室内壁挂扬声器CP-6TDNH 扬声器HS-15EExmNTDNH 扬声器HS-8EExmNTDNH 扬声器BK-560TDNH喇叭HS-15EExmNTDNH喇叭HS15 EEX11NTDNH 扬声器DSP25 EEXMNT DNH 扬声器DSP-15EExmNT DNH 室内广播喇叭型号：CP-66T DNH 扬声器CP－6TDNH 扬声器SAFE－10PT\DNH 扬声器HS－8 EEXMNT DNH 扬声器BF－620TDNH 扬声器BK560TDNH 扬声器DSP－25DNH 扬声器HS－15 EEXMNTMETSO美卓定位器ND9103HN美卓METSO 定位器ND9106HXIT Metso美卓球阀5H36HBRT美卓阀门定位器ND9103HXT/I02美卓阀门定位器ND9103HX美卓阀门定位器ND9103HXT美卓阀门定位器ND9106HX美卓阀门定位器ND9106HXT美卓SR33B5HDNMETSO美卓阀门定位器NE724/S1美卓Mesto QX14B02SDM美卓METSO定位器ND9106HNT/K05 美卓定位器ND9102HNTMesto美卓位置开关QX2VK05HDM Mesto美卓限位开关SR33B5HDN Mesto美卓限位开关EN33A05DM美卓定位器ND9102HN美卓膜片RKQ-59美卓膜片RKQ-60美卓膜片RKQ-61美卓膜片RKQ-63美卓膜片RKQ-57美卓ND9102FX1美卓定位器NE724/S1-CE01美卓B1TAU8/25美卓定位器ND7103HX美卓定位器ND9103HX美卓定位器ND9106HX美卓定位器ND9106HNT/K05美卓气缸B1JU12/55美卓自控阀M1KA080AP-B1CU9-ND9102HN/I56-K1 美卓球阀5H36HBRT K02美卓限位开关EN44A02DM美卓球阀1"5H36HBRT美卓限位开关EN44A02DM美卓ND9106HX2\I02美卓VG8568XS\NI01美卓B1CU6/15美卓EN44A05DM美卓限位开关QX2VB02HDM美卓EN33A05DM美卓限位开关QX2VB02HDN美卓定位器ND9102HN阀门RAA200AS-B1CU11-NE724-S1-K阀门RAA150AS-B1CU11-NE724-S1-K阀门RAA080AS-B1CU6-NE724-S1-KRAA065AS-B1CU6-NE724-S1-K美卓ND9206HE1T美卓调节阀RAA080AS-B1CU6-ND9103HN-K1美卓ND9106HXT美卓智能阀门定位器ND9103HNT IP66/NEMA 4X美卓METESO调节阀Q-RAA080ASMETESO阀门定位器ND9102HU1TMETESO执行器B1CU6美卓V型球阀REMA150AJJST+B1CU11+ND9103HN 美卓NE724/S1L12A150AA -B1CU6-ND9103HXTL12A250AA -B1CU11-ND9103HXT美卓EN33A05DM美卓定位器NE729S/XS1A美卓定位器NE729S/S1A美卓定位器NE724/S1-CE01美卓定位器NE724/S1美卓，B1CU9/35L美卓ND9106HU2T阀门定位器美卓，行程开关HK3077SG美卓ND9106HNT/K05美卓定位器ND9106/K05美卓阀门定位器NE726/S1美卓限位开关EN44A02DMMETSO气源过滤调压阀51FR 960-173-500 METSO QX2VK02HDM定位器SR2VB5HDN METSOMETSO限位开关EN33A05DM多林格滤芯RDC03065 95-188多林格滤芯RDC11425 95-190美国多林格（DOLLINGER）滤芯49-22N204多林格49-153K5滤芯Dollinger多林格滤芯95-188Dollinger多林格滤芯95-189Dollinger多林格滤芯95-190Dollinger多林格滤芯94-154Dollinger多林格滤芯95-121Dollinger多林格滤芯95-151Dollinger多林格滤芯95-102Dollinger多林格滤芯95-154多林格滤芯3508094多林格滤芯3507603MCDANIEL 压力表K6KP－K－GF MCDANIEL 压力表KEP－K－GFMCDANIEL 压力表KPP－K－GFMCDANIEL 压力表K6kBMCDANIEL 压力表KPP-GFMCDANIEL 压力表KFL-GFTracker数字信号显示器211-D-B-1-RTracker 系统是是一套专业化的工装及刀具、夹具和量具智能数据库管理系统，它能对企业生产过程中的工装、刀具、夹具和量具进行整体的流程化管理，通过实时跟踪工装及刀夹量具的采购、出入库、修磨、报废、校准等过程，帮助库管员、工艺员、制造工程师和工装及刀夹量具主管等更有效地改善刀具管理过程，降低生产成本。

Parker Pneumatic产品目录说明书

Catalog PDN1000-2USParker PneumaticSolenoid Operators - CNOMO MaterialsTechnical data -Solenoid operators, coil combinationsPilot ValveBody:Polyamide Armature tube:BrassPlunger & core:Corrosion resistant Cr-Ni steel Seals:Fluorocarbon Screws:Stainless steelCoilEncapsualtion material:Thermoplastic as standard Duroplast for M12 connectionTransientsInterrupting the current through the solenoid coil produces momentary voltage peaks which, under unfavourableconditions, can amount to several hundred times the rated operating voltage. Normally, these transients do not cause problems, but to achieve the Maximum life of relays in the circuit (and particularly of transistors, thyristors and integrated circuits) it is desirable to provide protection by means of voltage-dependent resistors (varistors). All connectors/cable plugs EN175301-803 with LED’s include this type of circuit protection.Solenoid Coils with M12 ConnectionSolenoid Coils with DIN A or Industrial B Connectionabove part numbers for spares. The operators are supplied with mounting screws and interface ‘O’ rings. Coils and connectors must be ordered separately.22mm x 30mm Order code 30mm x 30mm Order code Spare Base Solenoid Pilot Operator CNOMO NCAir Preparation ProductsGlobal Modular Solenoid OperatorsNC Normal Operatorwith 22 x 30 standard coilNC Normal Operator with 30 x 30 standard coil Working pressure 0 to 10 bar 0 to 10 bar Ambient temperature -10°C to 60°C *-10°C to 60°C *Power (DC) 4.8W 2.7W Power (AC)8.5VA 4.9VA Voltage tolerance +/-10%+/-10%Duty cycle 100%100%Insulation class FFElectric connection B Industrial DIN 43650A Protection IP65IP65Approval UL/CSAWorking mediaAll neutral media such as compressed air* Limited to 50°C if use with 100% duty cycle(Revised 07-15-13)Click here to view bookmarks.Catalog PDN1000-2US Parker PneumaticAir Preparation ProductsGlobal Modular Solenoid OperatorsSolenoid Connectors / Cable Plugs EN175301-803Order code 22mm Form B Order code 30mm Form A Solenoid coil dimensions mm (inches)Cable plug dimensions mm (inches)Electrical schematics22mm Form B Industrial Cable plugs 22 x 30mm30 x 30mm30mm DIN 43650ACable plugs(Revised 07-15-13)。

森林机器市场的优秀供应商：Parker Hannifin的F11 saw motors产品说明书

Application Guide F11 Saw Motors Fixed DisplacementC a t a logue HY17-8245/UKJune 2005Hydr a ulic Motor F11 Saw MotorsC a t a logue HY17-8245/UKApplication Guide 2Parker Hannifin AB Mobile Control s Divi s ion Trollhätt a n, SwedenBenefits•Simple in s t a ll a tion - lower co s t •Sturdier sa w b a r s upport •Lower over a ll weight•Much more comp a ct in s t a ll a tion •Reduced motor s h a ft lo a ding •S a me mounting fl a ngein s t a ll a tion dimen s ion s for a ll s ize sP a rker H a nnifin hold s a le a ding po s ition when it come s to product a nd a pplic a tion knowledge, dedic a ted to s erve the fore s try m a chine m a rket.We h a ve component s s uch as pump s , cylinder s ,motor s , direction a l control v a lve s , remote control s a nd electronic equipment for mo s t of the hydr a ulic function s on a ny fore s try m a chine .IntroductionP a rker H a nnifin offer s a n exten s ive r a nge of compo-nent s s uit a ble for fore s try m a chine s a nd c a n ass i s t with a n optim a l technic a l s olution to obt a in the mo s t co s t-efficient s y s tem.B as ed on m a ny ye a r s of experience from fore s try a pplic a tion s , product development h as been focu s ed on helping m a nuf a cturer s obt a in the be s t po ss ible perform a nce from their m a chine s . M a ny of our prod-uct s h a ve, therefore, been developed in direct a nd clo s e cooper a tion with cu s tomer s .The optimal saw motorSerie s F11 motor s h a ve proven extremely reli a ble in dem a nding a pplic a tion s s uch as b a r (ch a in) sa w drive s . Prim a rily due to the 40 degree bent-a xi sde s ign, s pheric a l, light weight pi s ton s (with l a min a ted pi s ton ring s ) a nd timing ge a r, extremely high s peed s c a n be a llowed, a nd the reli a bility i s not a ffected even by low-temper a ture s t a rt-up s .To further enh a nce the sa w function a nd, a t the sa me time, reduce weight, co s t a nd in s t a ll a tion dimen s ion s ,P a rker h as developed a motor which i s s pecific a lly dedic a ted to b a r sa w s . B as ed on the well proven F11de s ign, the sa w motor permit s sa w b a r be a ring s to be mounted directly on the motor hou s ing, a nd the ch a in s pur ge a r in s t a ll s on the motor s h a ft without the need for a ddition a l be a ring s .Saw motor versionsThe sa w motor i s a v a il a ble in three s ize s , 10, 14 a nd 19 cm 3/rev. All motor s a re equiped with a n integr a ted,l a rge c a p a city m a ke-up (a nti-c a vit a tion) v a lve. The v a lve reduce s the ri s k of c a vit a tion when the pump s upply i s s uddenly s hut off while the motor i s s till running a t high s peed. A counter-pre ss ure of a round 10 b a r (me as ured in port B in the exemplified s che-m a tic to the right) i s recommended.If required, port 'G' c a n be utilized for s upplying m a ke-up oil to the motor or for driving the b a r feed cylinder a nd ch a in lubric a tor.The m a ke-up v a lve m a ke s the motor direction a l; when ordering, either R (right h a nd/clockwi s e) or L (left h a nd/counter clockwi s e) rot a tion mu s t be s pecified.Hydr a ulic s chem a tic (ex a mple; here, the F11 motor i s s hown with m a ke-up v a lve; s h a ft rot ation 'L')Ch a in sa w in s t a ll a tion (ex ample).Hydr a ulic Motor F11 Saw Motors3Parker Hannifin AB Mobile Control s Divi s ion Trollhätt a n, SwedenC a t a logue HY17-8245/UKApplication Guide SpecificationsAvailable standard versions :Part No Ordering CodePrd drawing Weight [kg]3781990F11-010-HR-XH-K-285-000-037812928,33798401F11-010-HL-CH-K-000-000-037969467,83797736F11-010-HR-CH-K-000-000-037969467,83783275F11-014-HL-WV-K-000-000-037831918,73785032F11-014-HR-WV-K-000-000-037831918,73783203F11-014-HL-CV-K-000-000-037931698,33783204F11-014-HR-CV-K-000-000-037931698,33781989F11-019-HL-XH-K-284-000-0378042410,83781991F11-019-HR-XH-K-286-000-0378224410,83782698F11-019-HR-XH-K-298-000-P 378224410,83782187F11-019-HR-XH-K-292-000-S 378224410,83780372F11-019-HL-CH-K-000-000-0378026111,13780371F11-019-HR-CH-K-000-000-0378026111,1F11 frame size-10-14-19Displacement [cm 3/rev]9.814.319.0Operating pressure m a x intermittent 1) [b a r]420420m a x continuou s [b a r]350350Motor operating speed [rpm]m a x intermittent 1)11 2009 9008 900m a x continuou s 10 2009 0008 100min continuou s5050Motor input flowm a x intermittent 1) [l/min]110142170m a x continuou s [l/min]100129154 Main circuit temp.2), m a x [°C]8080 min [°C]-35-30-35Mass moment of inertia(x10-3) [kg m 2]0.390.421.11)Intermittent: m a x 6 s econd s in a ny one minute.2)See a l s o in s t a ll a tion inform a tion, oper a ting temper a ture.Hydr a ulic Motor F11 Saw MotorsC a t a logue HY17-8245/UKApplication Guide 4Parker Hannifin AB Mobile Control s Divi s ion Trollhätt a n, Swedena lve a l;hown)F11-10 saw motor versionHydr a ulic Motor F11 Saw Motors5Parker Hannifin AB Mobile Control s Divi s ion Trollhätt a n, SwedenC a t a logue HY17-8245/UKApplication Guide F11-14 saw motor version1/8” (x2)ight thre a d;a lve nd option a l;s hown)Hydr a ulic Motor F11 Saw MotorsC a t a logue HY17-8245/UKApplication Guide 6Parker Hannifin AB Mobile Control s Divi s ion Trollhätt a n, SwedenF11-19 saw motor versiona lve a l;hown)Hydr a ulic Motor F11 Saw Motors7Parker Hannifin AB Mobile Control s Divi s ion Trollhätt a n, SwedenC a t a logue HY17-8245/UKApplication GuideOffer of SalePle as e cont a ct your P a rker repre s ent a tion for a det a iled ”Offer of S a le”.FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.Thi s document a nd other inform a tion from P a rker H a nnifin Corpor a tion, it s s ub s idi a rie s a nd a uthorized di s tributor s provide product a nd/or s y s tem option s for further inve s tig a tion by u s er s h a ving technic a l experti s e. It i s import a nt th a t you a n a lyze a ll as pect s of your a pplic a tion, including con s equence s of a ny f a ilure, a nd review the inform a tion concerning the product or s y s tem in the current product c a t a logue. Due to the v a riety of oper a ting condition s a nd a pplic a tion s for the s e product s or s y s tem s , the u s er, through it s own a n a ly s i s a nd te s ting, i s s olely re s pon s ible for m a king the fin a l s election of the product s a nd s y s tem s a nd ass uring th a t a ll perform a nce, sa fety a nd w a rning requirement s of the a pplic a tion a re met.The product s de s cribed herein, including without limit a tion, product fe a ture s , s pecific a tion s , de s ign s , a v a il a bility a nd pricing, a re s ubject to ch a nge by P a rker H a nnifin Corpor a tion a nd it s s ub s idi a rie s a t a ny time without notice.WARNING!Parker Hannifin is the world’s premier supplier of motion and control systems and solutions, with sales and manufacturing facilities throughout the world. For product information and details of your nearest Parker sales office, visit us at or call free on 00800 2727 5374.Hydraulics Group Sales OfficesAustriaWiener Neu s t a dtTel: +43 (0)2622 23501F a x: +43 (0)2622 66212BelgiumNivellesT el:+32 (0)67 280 900F a x:+32 (0)67 280 999Czech RepublicKlecanyT el:+420 284 083 111F a x:+420 284 083 112DenmarkBallerupT el:+45 4356 0400F a x:+45 4373 8431FinlandVantaaT el:+358 (0)9 4767 31F a x:+358 (0)9 4767 3200FranceContamine-sur-Arve Tel:+33 (0)450 25 80 25F a x:+33 (0)450 03 67 37GermanyKaarstT el: +49 (0)2131 4016 0F a x: +49 (0)2131 4016 9199HungaryBudapestT el: +36 (06)1 220 4155F a x:+36 (06)1 422 1525IrelandDublinT el:+353 (0)1 293 9999F a x:+353 (0)1 293 9900ItalyCorsico (MI)T el:+39 02 45 19 21F a x:+39 02 4 47 93 40The NetherlandsOldenzaalT el:+31 (0)541 585000F a x:+31 (0)541 585459NorwaySkiT el:+47 64 91 10 00F a x:+47 64 91 10 90PolandWarsawT el:+48 (0)22 863 49 42F a x:+48 (0)22 863 49 44PortugalLeca da PalmeiraT el:+351 22 9997 360F a x:+351 22 9961 527SlovakiaRef. Czech RepublicSpainMadridT el:+34 91 675 73 00F a x:+34 91 675 77 11SwedenSpångaT el:+46 (0)8 597 950 00F a x:+46 (0)8 597 951 10TurkeyMerter/IstanbulT el.:+90 212 482 91 06 or 07F a x:+90 212 482 91 10United KingdomWarwickT el:+44 (0)1926 317 878F a x:+44 (0)1926 317 855InternationalEuropeC a t a logue HY17-8245/UK PDF 06/05© Copyright 2005P a rker H a nnifin Corpor a tion All right s re s erved.AustraliaCastle HillT el:+61 (0)2-9634 7777F a x:+61 (0)2-9899 6184CanadaMilton, OntarioT el:+1 905-693-3000F a x:+1 905-876-0788ChinaBeijingT el:+86 10 6561 0520F a x:+86 10 6561 0526Asia Pacific GroupHong Kong, Kowloon Tel:+852 2428 8008F a x:+852 2425 6896IndiaMumbaiT el:+91 22 7907081F a x:+91 22 7907080JapanTokyoT el:+(81) 3 6408 3900F a x:+(81) 3 5449 7201Latin America GroupBrazilT el:+55 12 3954-5100F a x:+55 12 3954-5266South AfricaKempton ParkT el:+27 (0)11-961 0700F a x:+27 (0)11-392 7213USACleveland (industrial)T el:+1 216-896-3000F a x:+1 216-896-4031Lincolnshire (mobile)T el:+1 847-821-1500F a x:+1 847-821-7600。

Parker Hannifin 液压自动泵系统Check Valves手册说明书

Bodies and CavitiesContentsParker Hannifin CorporationPARKER STANDARD BODIES AND CAVITIESC04-2....................04 Size, 2 Way.......................................................................B04-2-*...................................BC7C04-3....................04 Size, 3 Way.......................................................................B04-3-*...................................BC8C08-2....................08 Size, 2 Way.......................................................................B08-2-*...................................BC9C08-3....................08 Size, 3 Way.......................................................................B08-3-*.................................BC10C08-4....................08 Size, 4 Way.......................................................................B08-4-*.................................BC11C09-2....................09 Size, 2 Way.......................................................................B09-2-*.................................BC12C10-2....................10 Size, 2 Way.......................................................................B10-2-*.................................BC13C10-2T ..................10 Size, 2 Way, “T” Body.......................................................B10-2T-*...............................BC14C10-3....................10 Size, 3 Way.......................................................................B10-3-*.................................BC15C10-3S ..................10 Size, 3 Way, Short ............................................................B10-3S-*...............................BC16C10-4....................10 Size, 4 Way.......................................................................B10-4-*.................................BC17C11-3....................11 Size, 3 Way.......................................................................4082075................................BC18C12-2....................12 Size, 2 Way.......................................................................B12-2-*.................................BC19C12-3....................12 Size, 3 Way.......................................................................B12-3-*.................................BC20C12-3L ..................12 Size, 3 Way, Long.............................................................B12-3L-*...............................BC21C12-4....................12 Size, 4 Way.......................................................................B12-4-*.................................BC22C12-4L ..................12 Size, 4 Way, Long.............................................................B12-4L-*...............................BC23C16-2....................16 Size, 2 Way.......................................................................B16-2-*.................................BC24C16-3....................16 Size, 3 Way.......................................................................B16-3-*.................................BC25C16-3S ..................16 Size, 3 Way, Short ............................................................B16-3S-*...............................BC26C16-4....................16 Size, 4 Way.......................................................................B16-4-*.................................BC27C20-2....................20 Size, 2 Way.......................................................................B20-2-*.................................BC28C20-3S ..................20 Size, 3 Way, Short ............................................................B20-3S-*...............................BC29COUNTERBALANCE CAVITIES AND BODIESMHC-010...............Single and Dual Counterbalance Bodies................................MHC-010-*...........................BC30MHC-022...............Single and Dual Counterbalance Bodies................................MHC-022-*...........................BC31MHC-025...............Single and Dual Counterbalance Bodies................................MHC-025-*...........................BC32MHC-050...............Single and Dual Counterbalance Bodies................................MHC-050-*...........................BC33PILOT PISTON CAVITIES10 Size...................10 Size Cavity for Single Check and Pilot Piston...................................................................BC3416 Size...................16 Size Cavity for Single Check and Pilot Piston...................................................................BC3410 Size...................10 Size Cavity for Dual Check and Pilot Piston......................................................................BC3416 Size...................16 Size Cavity for Dual Check and Pilot Piston......................................................................BC34STANDARD CAVITY PLUGSCavity Plugs ..........................................................................................................................................................BC35CARTPAK BODIESBD03-PN ...............P Port Interrupt, 2-Way, Body Only .......................................BD03-PN-*............................BC36BD03-PN2.............P Port Interrupt, 2-Way, Body Only .......................................BD03-PN2-*..........................BC37BD03-PNR.............P Port Interrupt, Reducing Function, Body Only ...................BD03-PNR-*..........................BC38BD03-PNS .............P Port Interrupt, Sequencing Function, Body Only................BD03-PNS-*..........................BC39BD03-PT................P to T, Body Only...................................................................BD03-PT-*.............................BC40BD03-ABN .............A and B Port Interrupt, Body Only.........................................BD03-ABN-*..........................BC41BD03-ABX .............A and B Port Crossover, Body Only.......................................BD03-ABX-*..........................BC42BD03-ABT..............A and B Ports to Tank, Body Only..........................................BD03-ABT-*..........................BC43BD03-DDX.............Ports A and B Drain to Crossover Port, Body Only................BD03-DDX-*..........................BC44BD03-BDA .............B Port Drain to A, Body Only .................................................BD03-BDA-*..........................BC45BD03-ADB .............A Port Drain to B, Body Only .................................................BD03-ADB-*..........................BC46SERIESDESCRIPTIONBODY NO.PAGE NO.Bodies and Cavities ContentsParker Hannifin CorporationSERIES DESCRIPTION BODY NO.PAGE NO.SPECIAL BODIES AND CAVITIESCAV0W-2...............2 Port....................................................................................LB1079*................................BC47 CAVSW-3...............3 Port....................................................................................LB1081*................................BC48 CAVT11A...............3 Port or 4 Port Dual.............................................................LB1082*................................BC49 CAVT21A...............4 Port....................................................................................LB1083*................................BC50 2C..........................2 Port....................................................................................LB1021*................................BC51 2G..........................2 Port....................................................................................LB1032*................................BC52 2R..........................2 Port....................................................................................LB105**................................BC53 2U..........................2 Port....................................................................................LB102**................................BC54 2X..........................2 Port....................................................................................LB1051*................................BC55 3A..........................3 Port....................................................................................LB100**................................BC56 3C..........................3 Port or 4 Port Dual.............................................................LB100**................................BC57 3J..........................3 Port....................................................................................LB1009*................................BC58 3K..........................3 Port....................................................................................................................................BC59 3M.........................3 Port or 4 Port Dual.............................................................LB100**................................BC60 3X..........................3 Port....................................................................................LB1055*................................BC61 3Z..........................3 Port....................................................................................LB103**................................BC62 4C..........................4 Port....................................................................................LB1056*................................BC63 5A..........................5 Port....................................................................................LB103**................................BC64 53-1.......................3 Port or 4 Port Dual.............................................................LB1031*................................BC65 54-1.......................3 Port....................................................................................LB10591................................BC66 68-1.......................3 Port or 4 Port Dual.............................................................LB102**................................BC67 91-1.......................3 Port....................................................................................LB1015*................................BC68 100-1.....................5 Port....................................................................................LB1031*................................BC69BC1Bodies and CavitiesCatalog HY15-3502/USTechnical TipsParker Hannifin CorporationBC2Catalog HY15-3502/USBodies and CavitiesTechnical TipsParker Hannifin Corporation COMMON OPTIONS & FEATURES (Cont.)Pressure Drop: The pressure drop through a line body is fairly minimal. Each catalog page shows a pressure drop curve. This should be added to the pressure drop through the cartridge when trying to estimate total pressure drop for a function.Porting: Parker offers a variety of port sizes and types for each line body. While NPT or pipe ports were once very popular and are still offered, we recommend SAE ports for new applications. SAE ports and fittings provide a more secure connection than pipe ports.BSPP ports are also available.Port Numbering Change: With this catalog, we have re-numbered the ports on our 3-way line bodies. In the past, three way bodies were numbered with the nose231321Previous Design Current Designbeing port 1, the middle port labeled (3), and the top port labeled (2). Over the years, this has caused some confusion, so we have relabeled the ports sequentially from the bottom. For identifi-cation, the current design will be marked with a Parker symbol like the one shown.CAVITIESThe hole that the cartridge valve is screwed into is called a cavity. Many cartridge producers manufacture valves that fit a “common” cavity. With a “common” cavity, a valve theoretically could be removed from a cavity and replaced by another manufacturer’s product. One should be careful though to check cross drill ports and thread depths when pursuing this activity. While it is true that many manufacturer’s products fit inside another’s cavity,the cross drills sometimes expose an o-ring to pressure, causing the o-ring to be extruded.Valve / Cavity Compatibility Chart: Through acquisition, Parker Hannifin has accumulated anumber of manufacturers with “common” cavities. To accommodate all of our product lines, we havereleased a new cavity for our Winner’s Circle product line. The cavities shown in this catalog are considered Winner’s Circle Cavities. The Winner’s Circle valves are downward and upward compatible with the Parker Series of product. On each catalog page, you will find a chart like the one shown on this page. The purpose of this chart is to help identify if a valve from one acquisition can be replaced by the Winner’s Circle valve, or another acquisition. The valves are designated by the columns of the chart and thecavities by the rows. If you have an existing cavity, you find it on the chart and follow across to see which valves you may put in the cavity. For instance, using the chart below, let’s say you have an existingmanifold in which you had manufactured a FPS cavity (maybe you were using a SV2A-10). By finding the row labeled FPS and following across, you find that you could use the new Winner’s Circle product, an FPS product, or a CEC product of the same size in this cavity. A Parker or Waterman valve will not fit in this cavity without modifying the cavity. This chart is provided to help you in converting to the Winner’s Circle product line.Cavity Tools: On each catalog page, cavity tools are listed for your use in creating special manifolds. More is discussed on manifold construction in the Technical Data section of this catalog. For 3-way and 4-way valves, you will find a roughing and a finishing tool.The rougher is a step drill used to prep the cavity for the finishing tool. The rougher removes the mass of material and is necessary because the finisher is not designed for primary forming. The finisher is aprecision tool used to provide the final dimensions of the cavity. No rougher is offered for 2-way cavities because a standard drill bit can be used to remove the mass of material.Winner’s Circle X X X X XParker X X X Waterman X XXFPS X X X CECXXXW i n n e r ’s C i r c l eP a r k e rW a t e r m a nF P SC E CVALVEC A V I T YBC3Bodies and CavitiesCatalog HY15-3502/USTechnical TipsParker Hannifin CorporationBC4Catalog HY15-3502/USBodies and CavitiesTechnical TipsParker Hannifin CorporationBC5Bodies and CavitiesCatalog HY15-3502/USTechnical TipsParker Hannifin Corporation。

AMETEK氧化锆过滤器74422SE

AMETEK氧化锆过滤器74422SE （询：15 8 05 06 12 13-李工）AMETEK镜头CH13-0007-tAMETEK电路板13-0307AMETEK铂电阻13-0236AMETEK氙灯880-NSL分析仪配套200880001AMETEK检测电路板880020901AMETEK比值分析仪200886002AMETEK过滤器300-6217AMETEK燃气分析仪CMFA-P2000AMETEK超声波液位计US-21AMETEK干燥器305400901SAMETEK氧化锆过滤器74422SEAMETEK氧化锆头71785SEAMETEK过滤器71862SEAMETEK绝缘管Tube71782KEAMETEK变送器显示面板80472SEAMETEK光源电源880107902SAMETEK光源触发器880118901AMETEK冷镜式水露点分析仪13-1200-L-N-2AMETEK阴极灯(铜灯)300-8707AMETEK镉灯300-207*⑴AMETEK存储器880060901S880-NSLAMETEK多功能校准仪GOFRAASC300AMETEK过滤器74422seAMETEK电源模块500124901517.001.184 S100-200 detector bracket泰科3000-90133000-90143000-9015Tyco 泰科1.MCP2002.MCP2303.601P-M4.611H-FTYCO泰科继电器KU93-90081 , COIL: 24 V AC (1/10 HP, 120 V AC;1 HP, 5 A, 240 V AC ) TYCO泰科探测器：811H、811PH、801H、801PH、51-05 CP830TYCO泰科防爆感烟探测器MR501EX1. PN: 516.031.002Model: MR501EX OPTICAL DETECTOR2. PN: 517.035.002Model: M500Ex MOUNTING BASE泰科tyco T1216火警烟雾报警系统主板T1216 508.023.00416ZONE PANEL C/W VREC 110/230VTYCO泰科CP820 CP830 MCP220EXRAPID 送料器B4WE振动机 BL/60-105/6 6200W 品牌INVICAT VIBRATORS WICHITA 刹车器 MODEVO 350 C40089-600dynapower stratopowerP/N:880339 S/N:888012 30Speck泵 NP10/10-140CWHITE 怀特500300A3123AAAAANTC9221-J2000 380/220vac 50hz mh气体放电灯阿美泰克氧化锆上用的陶瓷过滤器 74422seHAWE（哈威）高压油泵R11.8-11.8-11.8-11.8高压油泵R3.3-1.7-1.7-1.7Werma报警喇叭140.920.55本迪克斯打气泵 229990KIDDE87-120006-001WHDR-400M Cylinder/Valve Assembly, 12 Flow, 4 Gallon Medium阿美特克碤玻漓窗2008887001阿美特克密封垫880042001阿美特克o型圈202813026CONTELEC传感器 VERT-X2831-710-621-102VERT-X2831-710-621-102MICHELL 湿度变送器 WM291-A-O-K7-N030-P070KOOMEY UNIT TYPE 80REPAIR KIT FOR HYD .4 WAY VALVE, 3 POSITION 1", 3000 PSI 1330-4199 7EA品牌：STAHL型号：三线圆插头\220V 16A 8570/12－306防爆报警蜂鸣器品牌：EDWARDS,型号：878EX-N5，规格：120V AC1、Master lock 1C8819 6mm锁钩，锁钩净高38mm，44mm高, 红色XENOY工程塑料安全锁 200个 1C8819 实际货号410MCNRED 红色威创压力传感器5ZB-2500H 5093BQS/20000PSI5093BQS 15000PSI5093BQS 20000PSISALA索拿 6116540PRESSURE SWITCH，DPDT TYPE，2AMP 24VDC，SET@7000kPa，MODEL:RGR4AGUJHDF20，MANUFACTURER:DELTA，DRW. NO:CJ06－4－0168－DWG－03－191A，ITEM NO:M，TAG NO.:191WHPA－WCP－1001－MS/WCMWILKSModel:InfraCal，model：CH ;P/N:405-0002MASTERVOLT400 20 250A31G09324V 25AOTECO3" RRV 1500-5000PSI W/3" LPT INLET & OUTLET,STANDARDP/N:130350卡特320D的喷油嘴brandt振动筛压块件号26EZ美国GIANT泵 P217KNORR气泵 K007546Bonfiglioli reducerType: 310R4517FPP132B2品牌：Cross液压缸型号：312DHRACINE 液压油泵 PSV-PNCF-20HRM-66Automatic Power 带红色LED U型灯FA-165EX ZONE 1 RED LED SUBSIDIARY “U”LIGHTBrand : WILKSInfraCal，model：CH ;P/N:405-0002执行器 woodwardType: B8251-772KOOMEY UNIT TYPE 80REPAIR KIT FOR HYD .4 WAY VALVE, 3 POSITION 1", 3000 PSI 1330-4199加顿丹佛250HP耗材分油器 2002EAU6013 (302EAU035)分油器 89837609DRUCK风压检测仪DPI705 2MPA马祖奇油泵ALP2A-D-50-FC福鸟ZM1002-S2+140罗蒙斯特唐纳森内滤芯 P829333RONNINGEN PETTER垫片 D01219PCM德拉斯哥 RBEI电气安全隔离栅 92460004-003SMC电磁阀 VQD1121-5G-X47DSC108R斯贝克泵 NP25/70/120泰科探头 811H泰科感温探测器601P-M泰科按钮MCP250M泰科按钮MCP260M泰科感温探测器601H-F-M泰科探头631H-F泰科探头811PHPMR话筒 PS12(Art.No.6401-049-000-40）SPM冲击脉冲传感器 40000SPM插头和测量电缆 90005同轴BTI试剂盒 THPSFLOJET泵 2100-883Druck压力变送器 PMP50A3-TC-A1-CA-H0-PA 0-12MPa G Druck压力变送器 PMP50A3-TC-A1-CA-H0-PA 0-10MPa G Druck压力变送器 PMP50A3-TC-A1-CA-H0-PK 0-4MPa G Druck 压力变送器 PMP50A3-TC-A1-CA-H0-PK 0-1MPa G 德瑞克振动马达 SGX-44-15-380/400-5-001 DATCON KFT传感器 02025-00DATCON KFT油位 10911-SPECIALCOFFIN WORLD WATER SYSTEMS阀 VSAB0451-4PLAST O MATIC VALVES INC压力表 GGTS100-PV-R-C力士乐油泵 A2FM63/61W-VBB040 9408551BOSCH继电器 333006006SUNFAB 泵 SCP047RH-L4-ZTF S10赛福乐水泵 8000-151-296SPM 传感器 42000美卓限位开关 EN33A05DM 8-125VDC,24-125VAC力十乐换向阀 4WE6E62/EW230N9K4FAFNIR轴承 3MM9308WICRDUMSUNFAB 轴油封修理包 50666奥盖尔泵 PVWJ-098-AIUV-LSAY-P-1NNNN奥盖尔泵 PVWJ-098-A1UV-RSAY-P-1NNNN奥盖尔密封修理包 K50826-200SC047R奥盖尔柱塞泵 PVM-130-A2UV-RSFY-P-1NNSN威创航空插头 10MSPT1106 标配泰科探头MD601EX泰科探头611HF泰科探头631HF泰科感温探测器601P-M泰科感烟探头 601H-R-M泰科按钮MCP250M泰科按钮MCP260M泰科DHM-5BTYCO探头 5B曼空滤细CF1810/WG9725190103-1曼空滤粗C271050/WG9725190102-1THORN按钮519.001.008万国转向灯1661761C93威创航空插头 10MSPT1106 标配AUTRONICA释放开关BF-502ORGA 34b00800 P/N.010085GOODYEAR软管53908511205098GE灯LU70/ECODNH喇叭BK-560TSUNFAB 泵 SCP047RH-L4-ZTF S10PCM德拉斯哥 RDanfoss液压泵SNP1NN/2,2RN01BAP1F3F3NNNN/NNNNN哈威油封60950303-00/6095 0301-00SC047R配件 20032KSR液位计ASC4RV1 5-VS-L 260/2-V44AKSR液位计ASC4RPP1 5-PPS-L245/12-PP44A杜博林旋转接头902-120-188Delco-Remy起动马达10479645FMC上水阀3229886FMC蝶阀3227496FMC蝶阀3232417FMC蝶阀3245819SPM由壬3P10228Wandfluh电磁阀AEXd4z60a/l15费希尔减压阀627538P+F传感器NJ15-30GM50-A2-V1HACKMAN METS OY AB板3292778万国胶套503359C1Billy Pugh WVO-100BEI编码器HS35F-1-14L-RZ-SS-500-AB-3904-TB-5V-EX-SC0N 斯贝克泵 NP25/70/120卡特启动电池 9X-9720Hydro Leduc泵P/N：PAC800511705 S/N： 00012270英特单向阀KIT169WABCO刹车总泵 4613150770Desoutter平衡器50572哈希废液阀（捏阀）YY0000005哈希标准液阀YY0000290哈希白色多通道模块YY0000156哈希消解管YY00001226哈希活塞YY0000068哈希年维护组件YY0000090GAMAK电机 GM2E160M泰科底座 5B 5”泰科感温探测器601P-M摩菲显示表 PV101-C-M02摩菲线束 PVW-PW-30菲尼克斯防雷器 PT 2x2-24DC-ST菲尼克斯底座 PT 2X2-BE摩菲显示表 PV101-C-M02摩菲线束 PVW-PW-30摩菲显示表 PV101-C-M02摩菲线束 PVW-PW-30菲尼克斯防雷器 PT 2x2-24DC-ST菲尼克斯底座 PT 2X2-BEKAG电机M42*20/1Trafag 8472.78.5717ARAG控制阀SERIAL NO.D374341 Club Car电脑板 101909901Club Car电脑板 101909902福鸟传感器 WS32-2/600丹弗斯 EV220B 25BUE压力开关 J120-484CANRIG顶驱M19-3006-010STAHL 插头8570/12-406STAHL 插头 8570/11-406桦特可空硅调功器 W5TZ4V100-24C ORGA 导航障碍灯 HSL18EX-R-24-AB 艾里尔一级活塞杆 C-1137艾里尔阀门 B-3635-T卡特启动机马达 237-1962ORGA灯泡 34S02420E+E 传感器 EE21-FT3B53/T24 AUTRONICA 探头 X-33AF马丁戴克仪表油 W15-1VARCO Z6001MAXIMATOR 阀 VP14.10.03 SUNFAB 轴油封修理包 50666天马接头3810TEMA接头 3820滤芯滤芯 p551551派克高速马达 F11-005-MB-CN-K-000 CAT 泵配件030223CAT 泵配件 030300CAT 泵配件 030226CAT 泵配件 030687CAT 泵配件 030449CAT 泵配件 015770K60N-108RDNOILTECH 冷却器 B25TH*40/1P-SC-SBAILEY 安全阀 746-1122P卡特彼勒蓄电池9X9730三阳刹车装置 DB-3010A-4-01SICK 光电眼 KT6W-2N5116VDO 表 331 810 012 007ADI采样泵 M121-BT-WB2西门子手持编程器 7ML58302AHSED 电磁阀 600.2.5.1.1.24DCWABCO刹车总泵 4613150770斯堪韦尔 MP-T-P-7.0-RCOMROD 发射天线：AT92MSAILOR天线耦合单元HA4555天马接头 5010天马接头 5020SUNFAB SCM034WN-I42-K30-K3-G-100优格玛筛网 TH48-30*0.60SSSUNFAB 轴油封修理包 50666胜凡活塞环 20035MCDANIEL 压力表 KQP-GFMCDANIEL 压力表 EPP-GFMCDANIEL E30KP-GFMcDaniel KFP-GFVIATRAN传感器 3475BFGBYDWLR（替代3405）CR油封 47697泰科感烟探头 811PHEXN泰科感温探头 851PHDET-TRONICS 气体检测变送器 505A3A2A1W斯贝克柱塞泵 D-82538/P11/13-100/3.9KW. 斯贝克柱塞泵 D-82538/P11/13-100/3.9KW. SMC电磁阀 VQZ2220BR -5Y01-C6-X507 VALEO法雷奥启动马达 D9E51HYDRO-LEDUC高压柱塞泵 P/N:XP50-0517625 MEDC手动火灾报警按钮 PBEB4B645DSN7R BRAUN D421.52U2FASCO MOD:71731714 U73B1NOP摆线泵 TOP-212HWM小巨人泵 TE-6-MD-HC派克马达 F11-005-MB-CV-K-209-000-0MCDANIEL压力油表 K9NL-GFSCP-047R-N-DL4-L35-SOS-000SUNFAB 轴油封修理包 50666华高电缆接头114869-PL-BLK华高电缆接头114869-PL-WHT华高电缆接头114869-PL-RED天马接头 IF3820天马接头 IF3810SUNFAB 轴油封修理包 50666SCP-047R-N-DL4-L35-SOS-000SC056RSC064RSPECK 调压阀 UL180/100HEBMPAPST 轴流电机 R4D-400-AL17-05EBMPAPST 轴流风机 R4D400-AB04-05 400V-50HZ 1.2A SUNFAB 轴油封修理包 50666UFM流量开关SN-ASB2GM-4-700V.9-A2WL-.75D SPECK调节阀 UL221 100。

液压马达安装指导

备件订单上必须有产品代码和制造序列编号。
运输
以如下方式运输马达：木箱包装。
无液压油。
喷有底漆。
油口保护塞（用塑料 / 金属的塞子或法兰板密封油口）。
连接面受保护（此类表面不喷漆），其上覆盖一层清漆薄膜以防止氧化。
如果在马达运行时不取下塞子，则应将其替换成金属材料的塞子。
6
18/01/2013
9
诊断
拧紧力矩
启动
油品
系统回路
参考技术样本给出的规格。
附件
产品
马达的支撑表面必须清洁（无油漆，油脂，氧化等。）以便能正确安装到车辆上。
总览
液压马达
波克兰液压 POCLAIN HYDRAULICS
轴的固定
马达 / 轮毂联接
必须绝对避免轮毂在螺栓上摩擦，否则可能损坏螺纹而改变拧紧条件。
参考技术样本给出的规格。
制动器释放
机械的方法释放制动器液压方法的制动器释放制动器释放压力
21
22 23 24
2
18/01/2013
POCLAIN HYDRAULICS 波克兰液压
液压马达
目录
总览
3
总览
元件铭牌标识运输储存储存周期喷漆
6
6 6 7 7 7
速度传感器 TD, TR, T4 缩紧套
25 30
系统回路
径向力是反向扭力臂反作用力与马达和反向扭力臂合重力的合力。
R min. mm MS35 MS50 MS83 MS125 500 600 800 800 [in] [19.68] [23.62] [31.5] [31.5] mm 290 340 380 394
F [in] [11.42] [13.39] [14.96] [15.51]

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

PARKER液压马达F11-010-MB-CV-K-000-000-0
联系：郑-工15 260 822 709 Q 72 827 45 85
KINSSON 同步分流马达*421004313568 JXT-012K-VR-N KINSSON 同步分流马达*421004313099 JXT-014K-VR-N KINSSON 同步分流马达*421004313569 JXT-024E-VR-N KINSSON 同步分流马达*421004313566 JXT-025E-VR-N KINSSON 同步分流马达*421004313199 JXT-026E-VR-NNet
克朗普顿的计时器计时表242-1576-BUZH-DC-2T-SM
MOOG
D634-341C R40K02 MONSS2
派克Parker
F11-010-HU-CV-K-000
TOPWORX开关DXP-M2CGNES0000N6217 VOITH DSG-B07212
丹尼斯克探头PT460E-35MPA-6-T80，2个
罗斯蒙特2051TG4A2B21AB4M5 压力变送器
GOLDAMMER传感器WN1-L100-220V AC
西门子
7ML5423-1LE01-2CA0 雷达液位计
6DR5020-ONG00-OAAO 电气阀门定位器
7ML5423-1LE01-2CA0
6DR5020-0NG00-0AA0
诺蒂菲儿JTWB-BCD-5451EIS 停产替代型号
JTWB-BCD-5151EIS 型感温（防爆型）火灾探测器3781359 F11-010-HL-XH-K-212 parker油压马达3781988 F11-010-HL-XH-K-283 美国派克马达3781878 F11-010-HR-CE-K-000 美国派克液压马达3785435 F11-010-HR-CH-D-000 parker液压马达3797736 F11-010-HR-CH-K-000 parker 液压马达3798634 F11-010-HR-CH-K-208 parker 马达
3799376 F11-010-HR-CH-K-213 派克马达
3785142 F11-010-HR-CH-K-308 派克液压马达3797735 F11-010-HR-WH-K-000 parker派克马达3799599 F11-010-HR-XH-K-216 parker派克液压马达3781990 F11-010-HR-XH-K-286 派克液压马达3707475 F11-010-HU-CE-K-000 parker柱塞马达3709816 F11-010-HU-CH-D-000 parker马达
3707310 F11-010-HU-CH-K-000 parker油压马达3785478 F11-010-HU-CH-K-201 美国派克马达3785558 F11-010-HU-CH-K-209-000-0 美国派克液压马达3783489 F11-010-HU-CN-K-000 parker液压马达3782650 F11-010-HU-CN-K-201 parker 液压马达3785244 F11-010-HU-SE-S-000-000-0 parker 马达3785725 F11-010-HU-SV-K-000-000-0 派克马达
3785220 F11-010-HU-SV-S-000-000-0 派克液压马达3781906 F11-010-HX-CH-K-280 parker派克马达3780540 F11-010-JB-CH-K-000 parker派克液压马达3781394 F11-010-JU-CH-K-000 派克液压马达3781973 F11-010-JX-CN-K-280 parker柱塞马达3782669 F11-010-LB-CE-K-000 parker马达3782231 F11-010-LB-CH-D-000 parker油压马达。