TPC1262Hi触摸屏工控机
2012_1262Hi_发布资料_V1.0
1.产品规格(红色字体标注：与原1262H不同)2.接口定义1262Hi引脚定义：1262Hi功能拨码和终端匹配电阻：拨码说明：● 将第1、2拨码开关拨置ON状态，第3拨码开关拨置OFF状态，表示串口通讯方式为RS485。
● 将第1、2拨码开关拨置OFF状态，第3拨码开关拨置ON状态，表示串口通讯方式为RS232。
● RS485_TR表示串口在485通讯方式下的终端电阻,拨置ON状态为有终端电阻，OFF为无终端电阻。
默认设置：COM2：第1，2开关ON，第3，4开关OFF。
COM4：只支持485方式，拨码取消3.变更说明4.组态软件附：名词解释5分钟取5分钟才刷一次数据到SD 卡，A.TFAT功能：TFAT(Transaction-safe FAT)，是微软为安全传输提供的FAT文件系统。
TFAT使用特殊机制来保护FAT表及文件的机制，来避免操作过程中的意外中断而带来的数据丢失。
比如由于断电导致的文件系统崩溃（这种情况会导致CESVR丢失文件读写到一半（这种情况会导致MCGS启动、运行过程中死机，而一旦重新下载工程，又会恢复正常）。
B.铁电功能：使用铁电晶体芯片存储数据的功能。
他可以像RAM那样密集访问（其读写寿命为10的14次方,每毫秒写入一次可上电的情况下保持数据。
MCGS 7.5将利用此器件在TPC断电器件保留初始值，然后在系统上电时恢复初始值。
C.SD卡功能：SD卡是Nand芯片和ECC硬件校验芯片的结合，通过硬件来保证纠错效果，目前实测达到上亿次操作，未发现EC 多个电平以存储多位数据）来降低了存储容量的单价。
MCGS 7.5将使用SD卡存储MCGS历史存盘数据，这样可以确保核心板上写入，保证整个系统可靠性。
5。
方式为RS232。
，OFF为无终端电阻。
低于5NAND0002）向前兼容错效果，目前实测达到上亿次操作，未发现ECC错误。
同时通过MLC技术（在一个位置存储储MCGS历史存盘数据，这样可以确保核心板上的Nand芯片只在极少情况下（工程下载时）（其读写寿命为10的14次方,每毫秒写入一次可以坚持10年以上），又可以像Nand一样在不然后在系统上电时恢复初始值。
EchoTouch 图形触摸屏控制器产品说明书
Corporate Headquarters n Middleton,Wisconsin,USA n Tel +6088314116Service (Americas)n **********************London,UK n Tel +44(0)2088961000n Service:(UK)*********************Rome,IT n Tel +39(06)32111683n Service:(UK)*********************Holzkirchen,DE n Tel +49(8024)4700-0n Service:(DE)****************************Hong Kong n Tel +852********n Service:(Asia)*******************Web: n ©2018Electronic Theatre Controls,Inc.n Product information and OverviewEchoTouch is an all-in-one flush or surface mounted graphic touchscreen controller that provides control of up to 16Echo Zones and connectivity with other Echo control and output products.EchoTouch also provides local control of a full universe of DMX outputs,and sACN or Art-Net outputs.EchoTouch is compatible with all RDM enableddevices.EchoTouch features:•64Presets shared across the Echocontrol system•40Zones of control (with the first16shared across the Echo controlsystem)•4internal Sequences (DMX,sACNand Art-Net only)Prepare for InstallationEchoTouch ships with the touchscreen,a mounting collar,and an installation termination kit.It is designed for installation into a US standard three-gang deep flush mount back box (sold separately)or a surface mount back box (ETC part number 7186A1116-4).The EchoTouch controller includes the following installation parts and supplies:•(1)5-position screw terminal connector -J3228-F•(1)3-position screw terminal connector -J30193-F•(1)3-position Cat5insulation displacement connector -J30187-F •(3)cable ties for DMX out cable preparation•Heat shrink -various sizes and lengths for DMX out cable preparation •Receptacle spacers•Mounting screws –(4)6-32x3/4”and (4)6-32x13/4”•ESD Ground pigtail (2-wires with spade terminal)•(1)3-position WAGO 221Series LEVER-NUTS ®SpecificationsAmbient EnvironmentFor indoor use only.•32°F to104°F(0°C to40°C)operating temperatures in0–95%non-condensing humidity.Compliance•UL and cUL listed•Conforms to EN62368-1(Part1Safety Requirements)•CE listed•FCC compliantElectrical and Auxiliary Wiring Specification•EchoTouch is powered by either Auxiliary power or by Power overEthernet(PoE802.3af).-Auxiliary Power-24VDC auxiliary power requires two16AWG(1.5mm2)wires and terminates to the provided removable pluggableconnector.The unit draws400mA(typical)during normal operation,with a maximum of750mA draw.-Power over Ethernet-PoE requires Category5cable or approvedequal with an RJ45(Category5compliant)connector.EchoTouchincludes an RJ45receptacle on the back panel for connection of PoE.As required,separately order an Ethernet Cat5Termination Kit fromETC(order part number4101A2003)which includes building wiretermination supplies,instructions,and an Ethernet patch cable.•EchoTouch requires an ESD Ground wire regardless of installation ofgrounded metal conduit.-ESD Ground-requires one14AWG(2.5mm2)building wire andutilizes the provided ESD ground wire pigtail and3-position WAGO221Series LEVER-NUTS®provided in the installation termination kit.Control Wiring SpecificationEchoTouch can be used with the Echo control system using EchoConnect,and provides512channels of DMX out,and512channels of sACN out to a networked system.ConfigurationThis document guides you through the installation of the EchoTouch controller.For more detailed information about graphic configuration options available,reference the integrated help system.InstallationInstall the Mounting CollarEchoTouch installs to a 3-gang deep back box,to the EchoTouch surface mount back box,or to an EchoTouch Rack-mount kit.•Listed 3-gang deep back box (by others)-in accordance with NEC and local electrical codes.•EchoTouch Surface-mount back box available from ETC (order part number 7186A1116-4).If using a surface-mount back box by others,it must be in accordance with NEC and local electrical codes.•EchoTouch Rack-mount kit available from ETC (order part number 7186A1117).Reference the Rack-mount kit installation instructions before proceeding with theinstallation.Flush mountSurface mount1.Install the back box.•Flush-mount back box-when preparing the installation location,carefully cut the hole in the wall surface material and ensurethere are no gaps around the box.•Surface mount back box-installation hardware is not provided.The installation location must support up to5lbs.(2.3kg),whichincludes the EchoTouch,surface mount back box,and wiring.Align the surface mount back box to the installation location andsecure in place using four1/4”(6mm)mounting bolts or screws(not provided).2.Run all power and control wires to the installation location.ReferenceSpecifications on page 2and Control Wiring Specification onpage 3for details.3.Install the mounting collar to the back box.a.Align the mounting collar to the back box with the arrowsdirected up.e three mounting screws(provided)to loosely install themounting collar to the back box.Install two screws on thebottom and one screw installed on the center top mounting slot(as pictured on the previous page)for optimal levelingadjustment.c.Adjust the mounting collar in the slotted mounting holes for aflush and level installation,then tighten the mounting screws.ESD Ground TerminationInstall ESD Ground Wire Pigtail1.Locate the ESD ground pigtail(2green/yellow wires with spadeterminal)in the termination kit.This pigtail will be installed on thebottom left side,between the mounting screw and the mountingcollar on the touchscreen side(as shown above).a.Loosen the bottom left screw on the mounting collar and insertthe spade terminal.b.Re-tighten the screw for a secure fit.c.Gently bend the ESD ground wire spade terminal so the wiresare directed toward the back box.2.Locate the5-position screw terminal connector in the termination kit.3.Strip1/4”(6mm)of insulation from the end of one ESD ground wireand insert it into the terminal labeled“Echo",and secure.ESD Without Grounded Metal Conduit1.Pull an additional ESD ground wire(typically green/yellow)to theinstalled back box.2.Strip1/4”(6mm)of insulation from the end of the incoming wire andthe remaining ESD ground wire from the pigtail.3.Locate the3-position WAGO in the termination kit.4.Insert the incoming wire one terminal and the remaining ESD groundwire pigtail into another terminal,closing the terminal levers ontoeach e the third terminal in the WAGO to continue the groundwire run as needed.ESD With Grounded Metal Conduit1.Strip3/8”(1cm)of insulation from the end of the remaining ESDground wire from the pigtail.2.Terminate ground wire pigtail to a ground screw inside the groundedback box.EchoConnect TerminationThis instruction assumes preparation of Belden 8471(or equivalent)cable terminating to the 5-position screw terminal connector provided in the termination kit.1.Pull all required wiring (data+,data-)into the back box.2.Strip 1/4”(6mm)of insulation from the ends of each wire.3.Terminate EchoConnect wires to the 5-position screw terminal connector provided.EchoConnect is topology free,you may install the wires in any combination of bus,star,loop,or home-run.a.Insert the data -(typically black)wire into the terminal labeled “Echo -”and secure.b.Insert the data +(typically white)wire into theterminal labeled “Echo +”and secure.24VDC Auxiliary Power TerminationEchoTouch requires external power,provided by either a24VDC(Class2)auxiliary power supply or Power over Ethernet(PoE IEEE802.3af).Terminate24VDC auxiliary power to the5-position screw terminal connector provided in the termination kit.1.Pull all required wiring(typically a16AWG black and redwire pair)into the back box.2.Strip1/4”(6mm)of insulation from the end of each wire.3.Terminate24VDC wires to the5-position screw terminalconnector provided.a.Insert the negative voltage wire(black wire typical)into the terminal labeled“24V-”and secure.b.Insert the positive voltage wire(red wire typical)into theterminal labeled“24V+”and secure.DMX Cable Preparation and TerminationThis instruction assumes preparation of Belden 9729(or equivalent)cable for termination to the 3-position screw terminal connector provided.1.Cut cable so that an 8”(20cm)tail extends from the edge of the installed back box.2.Strip 7”(18cm)off the outer jacket.3.Label the cable with the data type and run designation.(DMX1,DMX2,etc.)4.Strip the foil shielding from each wire set to within 1/4”(6mm)of the outer jacket.5.Untwist the shield wire from each pair andapply a piece of 1/16”(1.6mm)clear heatshrink to each shield wire.6.Twist each shield wire back onto its data pair,and then apply a 1.5”(4cm)piece of3/16”(0.5cm)heat shrink all the way downeach 3-wire set.Make sure to capture the foilshielding at the base.7.Apply the 2”(5cm)piece of the 3/8”(1cm)heat shrink,centered on the end of the cable jacket and the bases of all the wiresin the cable.8.Cap the ends of the unused pair of wireswith a 1”(2.5cm)piece of 3/16”(0.5cm)heat shrink centered over the end of thewires.9.Strip 1/4”(6mm)of insulation from all of the wires to be used.10.Maintain the wire pair twist as close to the screw terminal connector as possible and terminate the wires.a.(shield)wire into the terminal labeled secure.b.Insert the data -wire (typically black)into the terminal labeled “DMX -”and secure.c.Insert the data +wire (typically red or white)into the terminal labeled “DMX +”and secure.11.Bend back the unused set of wires and secure them to the cable with a wire tie.12.Secure the terminated wire sets together with a wire tie 2”(5cm)from the connector.DMX Cat5Cable Preparation and Termination This instruction assumes use of Cat5(or equivalent)cable for termination to the 3-position Cat5insulation displacement connector provided in the termination kit.1.Follow normal Cat5wire installation procedures to remove 2”(50mm)from the end of the cable jacket.2.Separate the White/Brown,Orange,and White/Orange conductors from the cable.These conductors are required for DMX out.3.Cut the remaining unused conductors from the cable flush to the cable jacket.bel the cable with the data type and run designation (for example D1for DMX run 1).5.Twist the White/Orange and Orange conductors as close to the 3-position IDC as possible and insert the conductors through the labeled terminals as follows:•Common (White/Brown)to terminal 1•Data -(Orange)to terminal 2•Data +(White/Orange)to terminal 36.Fully depress each terminal,closing it onto the wire.7.Use side-cutters to trim the excess wire from the connector.Install Touchscreen 1.Align but do not install the touchscreen to the mounting collar.Ensure the touchscreen is oriented with the label text and molded rear panel arrow directedup.tabs (x4)PoE, sACN, Art-NetStatus2.Install the prepared 5-position screw terminal connector (24VDC,ESD Ground,and EchoConnect control wires)and the utilized 3-position connector (DMX)to the designated receptacle(s)on the rear panel ofthe unit.This instruction assumes you have prepared the cables andterminated them according to the provided instructions for yourinstallation type.3.If using Power over Ethernet to power the EchoTouch,install theEthernet cable to the receptacle on the rear panel of the unit.4.Press the touchscreen into the mounting collar until the screen is flush.You will hear an audible click when the mounting tabs have fullyseated into position.5.Apply power to the unit.After boot up,press the{?}button located atthe top left of the display to access the EchoTouch online help systemwhich provides information to setup and configure your touchscreen. Release EchoTouch from the Mounting Collar Access to the back of the touchscreen is required for the following operations:•to access the provided USB port for firmware update(see UpdateFirmware on the next page)•to download a configuration file(see online help system)•to troubleshoot control wiringThis procedure requires a flat blade jewelers screwdriver(not provided).1.Gently press the tip of a jewelers screwdriver up into the provided sloton either side of the mounting collar to release the touchscreenmounting clips.You will hear and feel an audible click when the clip isreleased,and the bottom of the EchoTouch touchscreen will be free ofthe collar.2.Repeat for the opposite side of the touchscreen.3.Carefully pull on each vertical edge of the touchscreen to remove itfrom the collar.Update Firmware1.Copy the firmware update file on the root directory of a USB drive thathas been formatted to FAT32.The file will be named similarly to ETC_CS_Console_#.#.#.#.fw,where#will be replaced with the versionnumbers.2.The EchoTouch should remain powered,but carefullyremoved from the mounting collar to gain access tothe rear panel.Reference Release EchoTouch fromthe Mounting Collar on the previous page forinstructions.3.Insert the USB drive into the EchoTouch USBreceptacle located on the underside of the rear panel.4.Access the front of the touchscreen and navigate toSetup>Files>Advanced>Update Firmware.A confirmation message will display.Select“Yes”tocontinue with the update5.When the touchscreen has booted,navigate to the General tab inSettings to verify the updated software version number is displayed.6.Disconnect the USB drive from the rear panel of the unit.7.Check that all connectors and cables are fully seated then reinstall thetouchscreen into the mounting collar.。
洛雷技术LH300T22系列智能触摸监控系统说明书
KEEP IN TOUCH—STAY CONNECTED.TOUCH OPERATIONSMART-PHONE & TABLET VIEWING†MAC & PC INTERNET MONITORING RECORD 70 DAYS TO 18 MONTHS EASY CONNECT SETUP WIZARDINTUITIVE TOUCH NAVIGATIONHigh resolution viewing and exceptional playback.PROFESSIONAL-GRADE VIDEO SURVEILLANCEAn expandable system that you can depend on.SLIM DESIGN AND SILENT OPERATIONYou can easily conceal you DVR.ANTI-GLARE TECHNOLOGYGet clear images under any lighting conditions.ULTIMATE CONNECTIVITYKeep in touch using any device from anywhere in the world.* For the latest smart phone compatibility list & free Appdownload† check •H.264 video compression.¹ DVI/VGA, HDMI compatible••Pentaplex operation - View, Record, Playback, Back Up & Remotely Control the system simultaneously •Recording options : Motion, schedule or continuous•Small form factor (7.0x11.5x1.5”)•“Flex” IR controller (line-of-sight not required)•USB: backup, image transfer, firmware upgrade, mouse & Touch operation•PTZ cameras supported (RS485)CONNECTIVITY•Instant Mobile Viewing on compatible Smart phones†•Exclusive LOREX Easy Connect Internet Set-up Wizard²•PC (Microsoft Windows™ 7/Vista/XP compatible) using Internet Explorer®•Mac™ compatible using Safari browser•Free LOREX DDNS (Dynamic Domain Name Service) for advanced remote connectivity at all times •Instant e-mail alertsTOUCH SCREEN MONITOR•21.5” Touch Screen LCD, 1920x1080 resolution•Optical, multi-touch technologyWHAT’S INSIDE IN THE BOX:•21.5” LED Touch Screen Monitor•DVR with pre-installed HDD*•High-resolution cameras*•Easy-to-follow setup instruction guide and manual•ALSO INCLUDES: Remote Control, Power Adapters, Mouse, Ethernet Cable, DVI to VGA •Converter, 60ft Camera Extension Cables per camera, USB, VGA, DVI Cables.VESA MOUNTEasily mounts to the back of an LCD monitor†† (Requires clear access tothe VESA mounting holes). DIGITAL VIDEO RECORDER:•High resolution AIS (Advanced Image Sensor) 480 TV lines •Lorex Pure Flat lens eliminates image curving•Exclusive infrared filter achieves accurate color reproduction in lighting conditions •Advanced day/night mode - picture automatically switches to B&W delivering better clarity in all low light conditions •Night vision range up to 75 ft. (25 m)** •Install indoors or outdoors (IP66)*** •Ceiling, counter or wall mountableCAMERAS (CVC6996):MOUNTING OPTIONSWall mountCeiling mountTable mountAIS IMAGE SENSOR + EXCLUSIVE INFRARED FILTER TECHNOLOGYAccurate color reproduction in varying lighting conditionsPURE FLAT™ LENSANTI-GLARE TECHNOLOGYEliminates image curving for an undistorted viewClear images under strong lighting conditions180mm/7.0”Dimensions:DISCLAIMERS:1. Recording time may vary based on recording resolution & quality, lighting conditions and movement in the scene.2. Requires a high speed internet connection and a router (not included).• DVI to HDMI converter cable required. (not included).† Instant Mobile Viewing on iPad™, iPhone™ , BlackBerry (supported model numbers: 9700, 9800, 9000, 8900), Android (version 1.5 & above) and Window Mobile (6.0 & above). Selectable one channel live viewing. Mobile phone data plan is required (not included). Router port forwarding required. For the latest smart phone compatibility list check as new smart phone models become available in the market.†† Easily mounts to the back of an LCD monitor with VESA standard mounting holes and an independent stand. Requires clear access to the 100 x100 mm VESA mounting holes.* Number of Channels/ Cameras/ Accessories/ HDD (hard disk drive) capacity may vary by model. Check your package label for specific content information.** Night vision range up to 75 ft. (23 m) in ideal conditions. Objects at or beyond this range may be partially or completely obscured, depending on the camera application.*** Not intended for submersion in water. Installation in a sheltered location recommended.All trademarks belong to their respective owners. No claim is made to the exclusive right to use the trademarks listed, other than the trademarks owned by Lorex Technology Inc. We reserve the right to change models, configurations or specifications without notice or liability. Product may not be exactly as shown. Images are simulated.SYSTEMOperating System: Linux (embedded)Pentaplex: Simultaneous View, Record, Playback, Backup & Remote MonitoringNumber of Channels: 8/16 ChannelInputs/OutputsVideo In: 8/16 x 1Vp-p, 75ohms, BNCDVI Out : DVI compatible. DVI to VGA Converter includedAudio In: 2 Line in(RCA)Audio Out: 2 line out(RCA)USB Port: 2 front & backAlarm In: 4 x TTL, programmable as NC/NOAlarm Out: 1 x Relay with NO/NC contactPTZ Control: By T erminal connector (RS485)DisplayLive Display: 1 or 4 or 9 (8ch)1 or 4 or 9 or 16 (16ch)Live Display Speed: 240 (8ch)/ 240 (16ch) NTSC, 200 (8ch)/ 200 (16ch) P ALOSD: ON/OFFOSD Navigation: USB Mouse, IR Remote Controller, Front Panel ControlsActivity Detection: 6 x 8 gridSensitivity Levels: 100System Control: USB Mouse, Front Panel Controls, Handheld Remote ControlFirmware Upgrade: Via USB deviceUser Authority: ADMIN/USER/GUESTRECORDINGVideo Compression: H.264Audio Compression: ADPCMRecording Speed & Resolution: 8/16 Channel: 240 fps (NTSC), 200 fps (P AL) @ 320 x 240 NTSC / 320 x 256 P AL120 fps (NTSC), 200 fps (P AL) @ 640 x 240 NTSC / 640 x 256 P AL60 fps (NTSC), 100 fps (P AL) @ 640 x 480 NTSC / 640 x 512 P ALRecording Resolution Setting: Programmable per cameraRecording Quality Control: 5 levelsImage Size: 8.51 Kbyte (640x480,640x512), 11.2 Kbyte (640x240, 640x256) 14.13 Kbyte (320x240, 320x256)Recording Modes: Continuous, motion, alarmPre Recording: Max. 10 secondsPost Recording: Max. 255 secondsAlarm Recording: Programmable per cameraReliability: W atch-Dog, Auto-recovery after power failure PLA YBACKPlayback Display: 1,4,9 (8ch), 1,4,9,16 (16ch)Playback Speed: V ariable up to 60xPlayback Players: Apple QuickTime PlayerSearch: By time & eventSTORAGE & ARCHIVEStorage: Up to 1 HDD’s (SA T A)Maximum Capacity: Up to 2TBBackup Media: USB Flash Drive (max 4GB)Backup File Format: MOV file (Codec included)Bookmark Archiving: SupportedCONNECTIVITYEasy Connect: 1. Y oics Enabled (registration required)2. Lorex Auto Port Forward WizardSoftware: W eb browserSupported Operating Systems: Windows™ XP, Vista, 7 and Apple Mac (via Safaribrowser)Browsers: Internet Explorer, SafariEmail Notification: Snap Shot attachment (8/16ch)Mobile Connectivity: iPad™ , iPhone™ - 3.1.2 and above, Blackberry™ -(supported model numbers: 9700, 9800, 9000, 8900),Android (version 1.5 & above), Windows Mobile™ smartphones – 6.0 and above touch screen smart phones DDNS: Free Lorex DDNSW eb Server Port: Programmable by UserNetwork Protocol: LAN, DHCP, Dynamic IP, DDNSNetwork Interface: 10/100-Base-TX, RJ-45Network Speed Control: 10 levels (28.8Kb ~ 1.5MB)/sec.GENERALPower Consumption: Approx. 30 wattsSupply V oltage: 120V AC-240V AC, 12VDC, 2.5A(4ch) 3A(8/16ch), 50/60Hz Unit Dimensions (W x D x H): 11.6” x 7.2” x 1.67”290mm x 180mm x 41.8mmUnit W eight: 3.2±0.22 lbs / 1.45±0.1 kg (8/16ch)Operating T emperature: 41° ~ 104° F / 5° ~ 40° CHumidity: 10 ~ 75% NCDVR, TOUCH MONITOR & CAMERA SPECIFICATIONS DVR:Image Sensor: 1/4” Advanced ColorVideo Format/Pixels: NTSC: 656(H) x 492 (V)Horizontal Resolution: 480 TVLSync. & Scan. Systems: Internal; 2:1 InterlaceS/N Ratio: > 48dBIris & Shutter Speed AES; 1/60 - 1/50,000 sec.Minimum Illumination: ***********(IRoff),0LUX(IRLEDson) Video Output: Comp. 1.0 Vpp @ 75ohmLens/Lens Mount: 5.0mm F2.8/FixedFOV (diagonal): 50 degreesT ermination: Video: BNC Female, Power: Barrel FemaleIR / Night Vision Range: 30 IR LEDs/850nm/75’ (23m)Power Requirement: 12V DV ±10%Power Consumption: 220 mA or 3W maxOperating T emp.: 14°F ~ 122°F (-10°C ~ 50°C)W eight (with stand): 0.66 lb / 0.3 kgDimensions L x W x H(with sunshade): 5.1” x 3” x 5.1” / 130mm x 75mm x 129mm LCD Panel Size: 21.5” / 54.61 cmDCR: 10000:1 (typical)Viewing Angle: Horizontal 170°, vertical 160° (typical) Response Time: 5 ms (typical)Brightness: 265 cd/m2 (typical)Input Signal: Analog signal (D-sub); digital signal (DVI) Display Color: 16.7 M colorsFrequency: 24 ~ 83 kHz Horizontal, 50 ~ 76 Hz V ertical Optimum Graphic Resolution: 1920 x 1080 (60Hz)Max Pixel Clock: 180 MHZTilt: -5° ~ 20°Audio Output: 1W X 2Power Supply: AC: 100-240V ~ 50-60Hz;Power Consumption: Display mode: Max 48W; LED color: Blue Sleeping mode: Less than 1W, LED color: OrangeSize (W x H x D): 20” x 15.8” x 7.9” / 507mm x 402 mm x 200 mm W eight: 11lbs / 5 KgEnvironmental conditions: Operating temperature/humidity: 5 ~ 35°C,Relative humidity: 10-85%CAMERA (CVC6996):21.5” TOUCH SCREEN LCD MONITOR:MODELCONFIGURATIONPACKAGEW x D x H in & mmWEIGHTCUBEUPC CodeLH38410T228 ch Edge+ DVR x 4 (480) TVL Cameras x 1TB HDD x 21.5” Touch Monitor Retail English 658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”13.8 kg/30.5 lb0.09786 CBM / 3.49486 CBF7-78597-38410-9LH38410T22F 8 ch Edge+ DVR x 4 (480) TVL Cameras x 1TB HDD x 21.5” Touch Monitor Retail Universal 658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”13.8 kg/30.5 lb 0.09786 CBM / 3.49486 CBF 7-78597-38411-6LH328501C4T228 ch Edge+ DVR x 4(480) TVL Cameras x 500 GB HDD x 21.5” Touch MonitorRetail English658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”13.8 kg/30.5 lb 0.09786 CBM / 3.49486 CBF 7-78597-32806-6LH3281001C4T228 ch Edge+ DVR x 4(480) TVL Cameras x 1TB HDD x 21.5” Touch MonitorRetail English658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”13.8 kg/30.5 lb 0.09786 CBM / 3.49486 CBF 7-78597-32817-2LH328501C4T22FMX8 ch Edge+ DVR x 4(480) TVL Cameras x 500 GB HDD x 21.5” Touch MonitorRetail Universal658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”13.8 kg/30.5 lb 0.09786 CBM / 3.49486 CBF 7-78597-32806-6LH328501C4T22B 8 ch Edge+ DVR x 4(480) TVL Cameras x 500 GB HDD x 21.5” Touch MonitorBrown 650mm x 365mm x 560mm/ 25.6” x 14.4” x 22.2”13.8 kg/30.5 lb 0.09786 CBM / 3.49486 CBF 7-78597-32805-9LH3281001C4T22B 8 ch Edge+ DVR x 4(480) TVL Cameras x 1 TB HDD x 21.5” Touch MonitorBrown 650mm x 365mm x 560mm/ 25.6” x 14.4” x 22.2”13.8 kg/30.5 lb 0.09786 CBM / 3.49486 CBF 7-78597-32815-8LH318501C8T22B 8 ch Edge DVR x 8 (480) TVL Cameras x 500 GB HDD x 21.5” Touch MonitorBrown 650mm x 365mm x 560mm/ 25.6” x 14.4” x 22.2”15.9 kg/35.1 lb 0.1329 CBM / 4.692 CBF 7-78597-31812-8LH328501C8T22B 8 ch Edge+ DVR x 8(480) TVL Cameras x 500 GB HDD x 21.5” Touch MonitorBrown 650mm x 365mm x 560mm/ 25.6” x 14.4” x 22.2”15.9 kg/35.1 lb 0.1329 CBM / 4.692 CBF 7-78597-32809-7LH3281001C8T22B 8 ch Edge+ DVR x 8 (480) TVL Cameras x 1TB HDD x 21.5” Touch Monitor Brown 650mm x 365mm x 560mm/ 25.6” x 14.4” x 22.2”15.9 kg/35.1 lb 0.1329 CBM / 4.692 CBF 7-78597-32816-5LH326501C8T22B 16 ch Edge+ DVR x 8 (480) TVL Cameras x 500 GB HDD x 21.5” Touch MonitorBrown 650mm x 365mm x 560mm/ 25.6” x 14.4” x 22.2”15.9 kg/35.1 lb 0.1329 CBM / 4.692 CBF 7-78597-32606-2LH3261001C8T22B 16 ch Edge+ DVR x 8 (480) TVL Cameras x 1 TB HDD x 21.5” Touch MonitorBrown 658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”15.9 kg/35.1 lb 0.09786 CBM / 3.49486 CBF 7-78597-32611-6LH36810T22B 16 ch Edge+ DVR x 8 (480) TVL Cameras x 1TB HDD x 21.5” Touch MonitorBrown 658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”15.9 kg/35.1 lb 0.09786 CBM / 3.49486 CBF 7-78597-32610-9LH361610T22B 16 ch Edge+ DVR x 16 (480) TVL Cameras x 1TB HDD x 21.5” Touch MonitorBrown 622mm x 495mm x 444mm/ 24.5” x 19.5” x 17.5”23.3 kg/51.5 lb 0.136770 CBM / 4.83 CBF 7-78597-32614-7Includes 8 or 16 Channel DVR, HDD Pre-Installed, Remote Control & “Flex” IR controller, Power adaptor for DVR, Mouse, Ethernet Cable, DVI to VGA Converter, 4 or 8 x Cameras, 4 or 8 x Camera Stands, 4 or 8 x 60ft BNC Extension Cables, 1 or 2 x 4 in 1 camera power adaptors, 2 screws (for key-hole style VESA mounting), 21.5” LCD Touch Screen Monitor, power cord for Monitor, audio cable, USB cable, VGA cable, DVI cable.© 2011 Lorex Technology Inc.As our product is subject to continuous improvement, Lorex T echnology & subsidiaries reserve the right to modify product design, specifications & prices without notice and3700 Koppers StreetBaltimore, Maryland 21227,Lorex Technology Inc.250 Royal Crest CourtMarkham, Ontario, CanadaBack Panel - 8 & 16 Channel DVRsPRODUCT INFORMATIONProduct Information:。
市面上常见HMI品牌介绍
一、专业做HMI的品牌：1、Proface（普洛菲斯）普洛菲斯国际贸易(上海)有限公司作为日本迪吉特株式会社(Digital Electronics Corporation)投资的公司，以其创新的科技理念和领先的技术意识为全球客户提供可编程人机界面、工业平板式计算机、图形逻辑控制和工业信息终端等产品，帮助广大用户提高整体生产、经营效率。
Pro-face 这一品牌也在全球范围占主导地位，成为全球HMI行业领袖，在亚洲、美洲、欧洲都占有极高的市场占有率。
自2001年在中国成立公司进入中国市场以来，取得了骄人的业绩，赢得了国内工控领域的良好口碑，现已成为业内主导品牌之一。
Digital在江苏省无锡市设立了工厂，现在Digital已经成为施耐德旗下品牌。
2、HITECH(海泰克)HITECH是台湾的一个品牌，在中国大陆称为海泰克。
它是台湾泉毅电子股份有限公司的品牌，公司成立于1981 年，初期制造用于笔上的电子表。
为了将泉毅转型为以技术导向为主的公司，于1984 年开始研发制造LCD模组。
在当时，泉毅为台湾第一家成功开发LCD模组的厂商。
1990年泉毅成立一个新的R&D部门来积极投入应用于工业自动化领域的人机介面（HMI）研发工作。
泉毅是台湾第一家将嵌入式系统技术结合LCD模组，自行研发出工业级HMI产品的厂商。
经过多年的努力，泉毅已经建立起HMI的自有品牌HMI-Hitech PWS系列，销售据点遍及全世界，包括亚洲、美国及欧洲等。
其已经被瑞典贝尔收购，已经归入贝尔旗下。
其在大陆主要通过天津罗升销售。
目前在国内市场占有率比较高，但已经呈下降趋势。
3、BEIJER(北尔)来自瑞典的BEIJER电子集团，欧洲第一人机品牌，连续3年获得全球工业设计最佳奖IF设计大奖，全系列人机采用铝镁合金外壳设计，纤薄抗干扰能力强，64K TFT真彩显示，画面靓丽清晰，内嵌WinCE操作系统，功能强大，可靠性高，前面板防护等级为IP66，通过UL\DNV\RoHS等多种认证。
TPC7082S 说明书
方威科技产品服务手册TPC7082S说明书TPC7082S，是一款以嵌入式低功耗ARM Cortex A8 CPU为核心（主频1 GHz）的高性能嵌入式一体化人机界面。
该产品设计采用了7英寸高亮度TFT真彩液晶屏（分辨率1024×600），电容式触摸屏，以及电磁屏蔽性好、美观超轻薄的金属外壳。
产品可运行安卓、WinCE 6.0、Linux等系统，并在安卓系统下可支持TeslaSCADA、mySCADA等国外的APP形式工业组态软件。
产品特性液晶屏：7″TFT真彩液晶屏，分辨率（1024×600）CPU主板：ARM Cortex A8，1GHz内存：工业级512MB DDR3存储设备：工业级512MB Flash电子盘（可扩SD卡）触摸屏：电容式触摸屏（支持多点触控）接口：2×RS232，2×RS485，1×CAN，2×USB，1×LAN，Audio In/Out其他功能：支持蜂鸣器和扬声器LCD规格产品规格显示类型：7″TFT真彩液晶屏结构：全封闭金属结构分辨率：1024×600 颜色：工业黑色亮度：350nit 安装：嵌入式对比率：500：1 电源：6~42V DC（12V时最大电流600mA）工作温度：-20°C 至+70°C 功率：5WLCD寿命：50,000小时总体尺寸：背光寿命：30,000小时前面板：机柜开孔：净重：应用环境相关软件工作温度：-20°C 至+70°C 操作系统：Android 4.1 \ WinCE 6.0 \ Linux \ 工作湿度：5%至90%@50°C Debian \ Angstrom储存温度：-30°C 至+80°C储存湿度：5%至90%@40°C 应用软件：可选用TeslaSCADA、mySCADA 振动：10至57Hz位移幅值0.075mm 等APP形式组态软件，或用户57至150Hz峰值加速度9.8m/s2自行开发软件冲击：峰值加速度150 m/s2冲击脉冲宽度：10ms，半正弦波电源说明如图所示，产品采用了宽电压输入（6~42V DC），总功率为5W左右。
TPC1162Hi工业触摸屏
净重
2.2kg
外部接口
串口
1×RS232、1×RS232/485、
1×RS232、1×RS48口
环境条件
工作温度
0℃~50℃
工作湿度
5%~90%
储存温度
-10℃~60℃
振动频率
10-57Hz 57-150Hz
振动加速度
0.075mm 9.8 m/s2
振动扫频速率
Oct/min ≤1
认证防护
认证
CE/FCC
防护等级
IP65（前面板）
抗干扰性
工业三级
软件
组态软件
MCGS嵌入版组态软件7.5（运行版）
TPC1162Hi工业触摸屏
TPC1162Hi，是一套以嵌入式低功耗CPU为核心（主频600MHz）的高性能嵌入式一体化工控机。该产品设计采用了10.4英寸高亮度TFT液晶显示屏（分辨率800×600），四线电阻式触摸屏（分辨率1024×1024）。
产品特性
液晶屏
10.4"TFT液晶显示，真彩（LED背光），分辨率（800×600）
显示颜色
65535色
背光寿命
50,000小时
触摸屏
四线电阻式
供电电源
DC24V/11W
CPU主板
ARM结构嵌入式低功耗CPU为核心，主频600MHz
内存
128M
存储设备
128M NAND Flash
铁电存储
16KB
SD卡存储
内置4G
产品规格
结构
工业塑料模具
颜色
工业灰
面板尺寸
315mm×239mm
机柜开孔
海为工业触控一体机 IPC 使用说明说明书
IPC 工业触控一体机IPC使用说明厦门海为科技有限公司目录一、快速入门1.开机 (3)2.关机 (3)3.重启 (3)4.注销 (3)5.锁定屏幕 (3)6.触摸屏校准 (3)7.外接鼠标 (3)8.外接键盘 (3)二、系统设置1.切换系统语言 (4)●语言设置 (4)●设置地区格式 (5)2.网络设置 (6)●连接以太网 (6)●连接WIFI (8)3.添加打印机 (8)4.屏幕保护设置 (10)●屏幕亮度 (10)●屏幕锁定 (11)5.日期/时间设置 (11)●调整日期和时间 (11)●设置时钟格式 (12)6.查看硬件信息 (12)三、工程使用1.下载工程 (13)2.运行工程 (13)3.切换全屏窗口运行 (14)4.退出工程运行 (14)四、远程控制设备1.绑定设备 (15)2.远程控制 (15)五、设备管理器1.本地管理 (16)●下载工程 (16)●上载工程 (16)●离线更新 (17)●获取PN码 (17)●检测版本 (17)●历史记录上传 (18)2.云管理 (19)●下载工程 (20)●上载工程 (20)●离线更新 (21)●检测版本 (21)●历史记录上传 (21)一、快速入门1.开机长按工控机背部的开关键即可打开设备。
2.关机①单击工控机桌面右上角的程序图标，进入程序菜单，点击【关机】，选择【关机】，关闭工控机。
②长按工控机背部的开关键，即可关闭工控机（长按开关键关机容易损坏文件，不建议使用此方法关闭工控机）。
3.重启单击工控机桌面右上角的程序图标，进入程序菜单，点击【关机】，选择【重启】，重新启动设备。
4.注销单击工控机桌面右上角的程序图标，进入程序菜单，点击【注销】，选择【登出】，注销登录。
5.锁定屏幕单击工控机桌面右上角的程序图标，进入程序菜单，点击【注销】，选择【锁定屏幕】，即可锁定屏幕，若要再次使用设备，登录设备账号即可。
6.触摸屏校准步骤1：双击工控机桌面左上角菜单栏的eGTouch工具图标，进入eGtouch界面；步骤2：选择【工具】标签，在【功能】菜单栏选择【4点校准】；步骤3：进入四点校准界面，长按图标，完成一个校准点的校准即可进入下一个校准点，依次完成“左下、右下、右上、左上”四个校准点的校准工作；步骤4：完成四个校准点的校准之后，系统将弹出四点校准确认提示框，点击【OK】即可。
昆仑技创科技开发有限责任公司N系列产品说明书
深圳昆仑技创科技开发有限责任公司咨询186****5285SHENZHEN KUNLUN JICHUANG TECHNOLOGY DEVELOPMENT CO., LTD.目录N系列产品定位N系列全家福N系列八大优势N系列详细参数N系列接口定义N系列选型指导N系列安装方式N系列配套软件N系列应用案例场景使用人员使用目的主要功能模式说明远程运维研发人员远程调试下载上传HMI程序，常用于更新HMI程序1对11个人同时只能远程调试1个屏1个屏同时只能被1个人远程调试研发人员远程调试下载上传监控PLC，常用于检查设备故障售后人员远程调试VNC监控HMI屏幕，常用于调整设备参数数据上云管理人员数据传输数据接口，常用于多个屏对接第三方平台多对1多个屏连接1个平台MCGSWeb管理人员远程管理远程管理，常用于设备控制、查看状态、数据分析多对多多个人管理多个屏多个人管理1个屏1个人管理多个屏3大场景Wi-Fi/4G/LAN支持私有部署TCP/IP 232/485/422TCP/IP 232/485/422MCGSVPN云服务器VNC 画面同步监控上传/下载/更新HMI 上传/下载/监视PLCVNC 画面同步监控模式：一对一使用对象：研发人员售后人员优点：减少出差远程穿透后，还可以…模拟运行、串\网口设备调试Modbus 调试、变频器参数设置远程运维Wi-Fi/4G/LANMQTT/HJ212/Modbus/自定义TCP/IP232/485/422TCP/IP232/485/422第三方平台提供数据接口多种通讯协议模式：多对一使用对象：管理人员优点：接口丰富数据上云Wi-Fi/4G/LANTCP/IP232/485/422TCP/IP232/485/422MCGSWeb云服务器模式：多对多使用对象：管理人员优点：集中管理企业大屏项目管理地图展示设备管理数据管理权限管理微信推送短信推送MCGSWebMcgsLink 驱动N 系列全家福MCGS VPNManager MCGS 调试助手MCGS Pro MCGS WebTPC7022Ni7”TPC7022Nt7”TPC1021Nt10.1”TPC1031Ni10.1”TPC1431Ni/TPC1530Ni14”/15.6”TPC1231Ni/TPC1531Ni12.1”/15”Wi-Fi支持Wi-Fi2.4G 无线网络，轻松搭建方案成本更低廉远程下载远程下载/上传HMI 工程，更新环境设备维护更省事数据上云支持HJ212/Modbus ，协议多样送数上云更便利McgsWebMcgsW eb+ McgsLink ，安全稳定云端监控更轻松MQTT接入阿里/华为等云平台，众多选择数据上云更自由远程穿透远程下载/上传PLC 程序，在线监控故障排查更方便远程监控PC 端/移动端VNC 监控，画面同步现场信息更直观4G 网络电信/移动/联通全网通，4G 通讯联网方式更灵活Wi-Fi 模式：无线上网方案，快速搭建，经济可靠4G 模式：移动上网方案，广域分布，灵活性强LAN 模式：本地上网方案，信号稳定，速度流畅Wi-Fi/4G/LAN远程VNC 监控触摸屏画面，了解触摸屏当前状态1.点击“联机”2.点击“VNC ”VNC 画面屏中画面3.体验“VNC ”远程监控远程下载/上传触摸屏程序，便于更新现场工程1.点击“联机”2.输入内网IP 3.点击“工程下载”远程下载远程穿透远程上传下载PLC程序，可以模拟运行调试与PLC通讯昆仑技创McgsWeb + McgsLink ，轻松实现web 应用MCGSWeb产品规格结构工业塑料WiFi接口Wi-Fi IEEE802.11 b/g/n安装方式嵌入式安装4G 接口移动/联通/电信4G电源DC24V/6W总体尺寸226×163×36/203×149×38.5（mm）净重约0.8kg面板尺寸226×163/203×149（mm）外壳颜色工业灰/工业白机柜开孔215×152/192×138（mm）产品特性应用环境液晶屏7 " TFT液晶屏，分辨率800×480，LED背光工作温度0℃～50℃CPU主板以ARM为核心，主频800MHz振动频率10～57Hz 57～150Hz触摸屏四线电阻式工作湿度5%～90%(无冷凝)内存128M振动加速度0.075mm 9.8m/s²存储设备NAND 128M存储温度-10℃～60℃TPC7022Ni/TPC7022Nt接口1×RS232、2×RS485、1×USB、1×LAN震动扫频速率Oct/min≤1产品认证C E 认证EN55022、EN55024电磁兼容符合工业三级标准TPC1021Nt产品规格结构工业塑料WiFi接口Wi-Fi IEEE802.11 b/g/n 安装方式嵌入式安装4G 接口移动/联通/电信4G电源DC24V/7W总体尺寸274×193×42.7（mm）净重约1.4kg面板尺寸274×193（mm）外壳颜色工业灰机柜开孔261×180（mm）产品特性应用环境液晶屏10.1 " TFT液晶屏，分辨率1024×600，LED背光工作温度0℃～50℃CPU主板以ARM为核心，主频800MHz振动频率10～57Hz 57～150Hz 触摸屏四线电阻式工作湿度5%～90%(无冷凝)内存128M振动加速度0.075mm 9.8m/s²存储设备NAND 128M存储温度-10℃～60℃接口1×RS232、2×RS485、1×USB、1×LAN震动扫频速率Oct/min≤1产品认证C E 认证EN55022、EN55024电磁兼容符合工业三级标准TPC1031Ni产品规格结构铸铝结构WiFi接口Wi-Fi IEEE802.11 b/g/n 安装方式嵌入式、支架安装4G 接口无电源DC24V/7W总体尺寸271×213×32（mm）净重约1.4kg面板尺寸271×213（mm）外壳颜色银白机柜开孔260×202（mm）产品特性应用环境液晶屏10.1 " TFT液晶屏，分辨率1024×600，LED背光工作温度0℃～50℃CPU主板以Cortex-A7多核CPU为核心，主频1GHz振动频率10～57Hz 57～150Hz 触摸屏四线电阻式工作湿度5%～90%(无冷凝)内存128M振动加速度0.075mm 9.8m/s²存储设备NAND 128M存储温度-10℃～60℃接口1×RS232、2×RS485、1×USB、1×LAN、1×Wi-Fi震动扫频速率Oct/min≤1产品认证C E 认证EN55022、EN55024电磁兼容符合工业三级标准TPC1431Ni产品规格结构铸铝结构WiFi接口Wi-Fi IEEE802.11 b/g/n 安装方式嵌入式、支架安装4G 接口无电源DC24V/16W总体尺寸355×240×30.1（mm）净重约2.2kg面板尺寸355×240（mm）外壳颜色银白机柜开孔345×230（mm）产品特性应用环境液晶屏14 " TFT液晶屏，分辨率1366×768，LED背光工作温度0℃～50℃CPU主板以Cortex-A7多核CPU为核心，主频1GHz振动频率10～57Hz 57～150Hz 触摸屏四线电阻式工作湿度5%～90%(无冷凝)内存128M振动加速度0.075mm 9.8m/s²存储设备NAND 128M存储温度-10℃～60℃接口1×RS232、2×RS485、1×USB、1×LAN、1×Wi-Fi震动扫频速率Oct/min≤1产品认证C E 认证EN55022、EN55024电磁兼容符合工业三级标准TPC1231Ni/TPC1531Ni产品规格结构铸铝结构WiFi接口Wi-Fi IEEE802.11 b/g/n安装方式嵌入式、支架安装4G 接口无电源DC24V/14W/16W总体尺寸313×237×32.9/376×290×35（mm）净重约1.9kg/3.0kg面板尺寸313×237/376×290（mm）外壳颜色银白机柜开孔303×226/366×280（mm）产品特性应用环境液晶屏12.1/15" TFT液晶屏，分辨率1024×768，LED背光工作温度0℃～50℃CPU主板以Cortex-A7多核CPU为核心，主频1GHz振动频率10～57Hz 57～150Hz触摸屏四线电阻式工作湿度5%～90%(无冷凝)内存128M振动加速度0.075mm 9.8m/s²存储设备NAND 128M存储温度-10℃～60℃接口1×RS232、2×RS485、1×USB、1×LAN、1×Wi-Fi震动扫频速率Oct/min≤1产品认证C E 认证EN55022、EN55024电磁兼容符合工业三级标准TPC1530Ni产品规格结构铸铝结构WiFi接口Wi-Fi IEEE802.11 b/g/n 安装方式嵌入式、支架安装4G 接口无电源DC24V/16W总体尺寸395×258×30.1（mm）净重约2.3kg面板尺寸395×258（mm）外壳颜色银白机柜开孔384×247（mm）产品特性应用环境液晶屏15.6 " TFT液晶屏，分辨率1920×1080，LED背光工作温度0℃～50℃CPU主板以Cortex-A7多核CPU为核心，主频1GHz振动频率10～57Hz 57～150Hz 触摸屏四线电阻式工作湿度5%～90%(无冷凝)内存128M振动加速度0.075mm 9.8m/s²存储设备NAND 128M存储温度-10℃～60℃接口1×RS232、2×RS485、1×USB、1×LAN、1×Wi-Fi震动扫频速率Oct/min≤1产品认证C E 认证EN55022、EN55024电磁兼容符合工业三级标准N 系列接口定义COM 口COM1COM2COM3COM92 RXD7 A+4 A+7 TXD+3 TXD 8 B-9 B-8 TXD-项目说明以太网口10M/100M 自适应无线扩展4G/Wi-Fi COM 口1×RS232，2×RS485USB 接口1×USB Host电源接口24±20%VDC （如图：1+，2-）SIM 卡槽Nano SIM 接口说明电源COM21USB SIM 天线LAN 项目说明天线接口内螺内针安装方式室内、机壳外露：胶棒天线厂房、震动强烈：贴片天线山区、机柜安装：吸盘天线频带范围参照供应商规格书，确认覆盖2.4G 、4G 频段增益大小同一网络环境，增益越大，通讯可靠性越好天线说明Nano SIMN系列选型指导型号分类智能物联网触摸屏TPC7022Nt TPC7022Ni TPC1021Nt TPC1031Ni TPC1431Ni TPC1231Ni TPC1531Ni TPC1530Ni产品特性液晶屏7" TFT10.1" TFT10.1" TFT14" TFT12.1" TFT15" TFT15.6" TFT 分辨率800×480800×4801024×6001024×6001366×7681024×7681920×1080显示亮度250cd/㎡250cd/㎡300cd/㎡300cd/㎡220cd/㎡300cd/㎡220cd/㎡处理器ARM 800MHz Cortex-A7 多核1GHz内存128M128M系统存储128M128M外部接口串行接口方式1：COM1(RS232),COM2(RS485),COM3(RS485)方式2：COM1(RS232),COM9(RS422)方式1：COM1(RS232),COM2(RS485),COM3(RS485)方式2：COM1(RS232),COM9(RS422)USB接口1×Host1×Host以太网口 1 ×10/100M自适应 1 ×10/100M自适应无线扩展WiFi接口Wi-Fi IEEE802.11Wi-Fi IEEE802.11 4G 接口移动/联通/电信无产品规格机壳材料工程塑料铸铝面板外壳颜色工业灰工业白工业灰工业白后盖密封全密封全密封机柜开孔215×152192×138261×180260×202345×230303×226366×280384×247产品认证符合CE/FCC认证标准符合CE/FCC认证标准*挂钩安装支架安装多种场合自由选择使用挂钩安装时，螺丝不能拧太紧；安装角度介于0~30°之间；天线安装SIM卡安装安装：顺时针旋转拆卸：逆时针旋转安装：金属面朝外，缺口朝上插入拆卸：按压SIM卡，使之弹出，然后取出胶棒天线贴片天线吸盘天线Nano SIMMcgsWeb 版本是由昆仑技创最新发布的，配套昆仑技创智能物联网触摸屏使用的组态软件。
昆仑通态TPC与常见PLC的连接方法
信捷触摸屏用户手册硬件篇20111214
TP/TH/TG 系列触摸屏用户手册【硬件篇】
1 TP 系列人机界面产品概述
1-1 产品特点
信捷 TP 系列触摸屏功能强大，支持多国语言，任意字体和任意大小，不仅具备数据显 示、数据监控、报警、配方等基本功能，更逐渐完善其通讯功能，支持多种主流 PLC，双 口可独立通讯，其配套的画面编辑软件 TouchWin，用户界面友好，易于操作，支持离线和 在线模拟，并可实现组态功能，让您的控制系统使用更加轻松。
2-2 一般规格 .......................................................................................................................... 11 2-3 各部分说明 ............................................................................... 12
1-1 产品特点............................................................................................................................ 1 1-1-1 产品特点 ................................................................................................................. 1 1-1-2 型号命名 ................................................................................................................. 1 1-1-3 型号表 ..................................................................................................................... 1
Grantech艾讯宏达工控机产品介绍
Grantech艾讯宏达工控机产品介绍艾讯宏达科技##，本着“来自##，立足中国”的思路不断发展，致力于为广大用户提供高品质工控产品和完善解决方案，并逐渐成长为工控机领域国内领先的专业制造商之一。
所谓IPC（Industrial Personal puter）即“工控机”是一种即基于PC总线增强加固型的工业电脑，它可以作为一个工业控制器在工业环境中可靠运行。
其主要的组成部分为工业机箱、无源底板及可插入其上的各种板卡组成，如CPU卡、I/O卡等。
并采取全钢机壳、机卡压条过滤网，双正压风扇等设计及EMC技术以解决工业现场的电磁干扰、震动、灰尘、高/低温等问题。
工控机广泛应用于工业自动化、智能交通、轨道交通、金融自动化、多媒体播放、网络安全、电力、通讯、监控、医疗、军工等领域。
公司主要产品有：工业计算机(IPC)系列、嵌入式工业计算机（EPC）系列、嵌入式工业计算机（UFO）系列、无风扇工业平板电脑（UFP）系列、一体化工作站系列。
工业计算机(IPC)系列有:全长CUP卡： PICMG1.3 PICMG1.0、工业母板、工业机箱与一体化工作站、工业底板、原装整机、工业便携机。
嵌入式工业计算机（EPC）系列:Mini-ITX、3.5寸嵌入式主板、EPIC嵌入式主板、防火墙主板。
嵌入式无风扇计算机（UFO）系列：超薄型UFO6355H系列、通用型UFO6366H系列、扩展型UFO6377系列。
无风扇工业平板电脑（UFP）系列：10.4寸平板电脑、12.1寸平板电脑、15寸平板电脑、17寸平板电脑。
公司为客户提供的工控机产品多达数百种型号规格，详细资料请登录公司网页.Grantect..和公司产品手册。
以下是公司部分机型为您作详细介绍：工业计算机(IPC)PICMG1.0参数配置表型号SYS7190VGA SYS71838VGA图样CPU LGA775, Intel Core 2 Extreme / Core 2 Quad/ Core 2 Duo /Pentium Dual-Core / PentiumEE / Pentium D / Pentium 4 / Celeron 400with 45nm LGA775,Core2Duo/PentiumDual-Core/Pentium EE/PentiumD/Pentium 4/ Celeron DCPU主频最大支持3.8GHZ 最大支持3.8GHZ前端总线800/1066/1333 MHZ 667/800/1066MHZ 芯片组英特尔 Q35+ICH9DO 英特尔 945GC+ICH7 最大缓存12MB L2 6MB L2最大内存DDR2 4GB DDR2 4GBBIOS AMI AMI显示芯片英特尔GMA 3100 英特尔GMA 950显存最大共享384MB 最大共享224MB显示接口VGA VGA网口1个或2个英特尔82573L千兆网卡1个或2个英特尔82573L千兆网卡声卡Realtek ALC662(可选) Realtek ALC662硬盘接口4*SATAII 1*IDE/2*SATAII磁盘阵列RAID 0/1/5/10 无软驱接口无无并口1*SPPE/ECP/EPP 1*SPPE/ECP/EPP串口1*RS232/422/485 1*RS232/422/485USB 6*USB 2.0 6*USB 2.0Digital I/O 无无红外线接口无无板载SSD 无无看门狗1~255秒1~255秒电源类型AT/ATX AT/ATX操作温度0℃----60℃0℃----60℃相对湿度10％----90％10％----90％尺寸（长*宽）338mm*122mm 338mm*122mm工业计算机(IPC)PICMG1.3参数配置表型号SYS71943VGA SYS7193VGGA图样CPU LGA775,IntelCore2Quad/Core2 Duo/Celeron with 65nm/45nm Intel Core 2 Duo / Pentium D / Pentium 4 / Celeron DCPU主频最大支持3.8GHZ 3.8GHZ前端总线800/1066/1333MHZ 800/1066/1333MHZ芯片组英特尔G41+ICH7 英特尔 Q35+ICH9DO最大缓存12MB L2 12MB L2最大内存DDR38 GB DDR2 4GBBIOS AMI Phoenix-Award显示芯片英特尔GMA X4500 英特尔GMA 3100显存最大共享1024MB 最大共享384MB显示接口VGA VGA/24 BIT LVDS网口1*Realtgek RTL8110S 千兆网卡1个英特尔82573L千兆网卡声卡Realtek ALC662 Realtek ALC262硬盘接口4*SATA/1*IDE 4*SATAII磁盘阵列无RAID 0/1/5/10软驱接口无无并口1*SPPE/ECP/EPP 1*SPPE/ECP/EPP串口1*RS232 1*RS232/422/485 1*RS232 1*RS232/422/485USB 8*USB 2.0 6*USB 2.0Digital I/O 4-in 4-out 无红外线接口 1 无板载SSD 无无看门狗1~255秒1~255秒电源类型AT/ATX ATX操作温度0℃----60℃0℃----60℃相对湿度10％----90％10％----90％尺寸（长*宽）338mm*126mm 338mm*126mm工业底板PICMG1.0参数配置表型号GTB6022/6 GTB6022/8 GTB6022/13L GTB6022/14 图样插槽总数6 8 13 14PICMG 2 2 2 2PCI 4 4 4 4ISA 2 4 8 9电源接口AT/ATX AT/ATX AT/ATX AT/ATX尺寸132mm*258mm 220mm*260mm 316mm*260mm 317mm*260mm 可搭配机箱壁挂式机箱壁挂式机箱4U机箱4U机箱订购信息6槽PICMG工业底板8槽PICMG工业底板13槽PICMG工业底板14槽PICMG工业底板工业底板PICMG1.3参数配置表型号GTB6023/5PE GTB6023/14GPE图样插槽总数 5 14PICMG 1 1PCI-E*16 1 1PCI-E*4 0 0PCI-E*1 1 4PCI 2 7SATA接口 2 2USB接口 4 4电源接口24+4PIN ATX 24+4PIN ATX尺寸107mm*328mm 317mm*328mm可搭配机箱壁挂式机箱4U机箱订购信息5槽PICMG1.3工业底板14槽PICMG工业底板工业计算机(IPC)工业母板参数配置表型号SYM76901VGGA SYM76836VGA-5P图样CPU LGA775 for Core 2 Quad/Core 2Duo/Pentium Dual/Celeron processor LGA1155 for Intel®32nmSandy Bridge i3/i5/i7 processor，FSB 5GT/sCPU主频最大支持3.8GHZ 最大支持3.8GHZ前端总线800/1066/1333 MHZ 533/800MHZ芯片组英特尔 Q35+ICH9R 英特尔 945GC+ICH7最大缓存12MB L2 2MB L2最大内存DDR2 8GB DDR2 4GBBIOS Phonenix-Award Phonenix-Award显示芯片英特尔GMA 3100 英特尔GMA 950显存最大共享384MB 最大共享224MB显示接口VGA/DVI-D VGA网口2* Realtek RTL8111B千兆网卡1* Realtek RTL8111B千兆网卡声卡Realtek ALC885 Realtek ALC662硬盘接口1*IDE/6*SATAII 4*SATAII磁盘阵列RAID 0/1/5/10 无软驱接口 1 1并口1*SPPE/ECP/EPP 1*SPPE/ECP/EPP串口2*RS232 2*RS232USB 12*USB 2.0 8*USB 2.0Digital I/O 4-IN 4-OUT 无红外线接口 1 1板载SSD 无无扩展槽1*PCI-E*16 5*PCI 1*PCI-E*16 5*PCI看门狗1~255秒1~255秒电源类型AT/ATX AT/ATX操作温度0℃----60℃0℃----60℃相对湿度10％----90％10％----90％尺寸（长*宽）ATX305mm*244mm ATX305mm*244mm工业计算机(IPC)工业机箱参数配置表型号GT6145 GT6150图样系统主板工业长板或工业母板工业长板或工业母板驱动空间2个5.25寸，2个3.5寸驱动空间2个5.25寸，2个3.5寸驱动空间底板支持13槽、14槽工业底板支持13槽、14槽工业底板风扇2个80mm风扇1个120mm风扇电源1个ATX标准2U PS/2 电源1个ATX标准2U PS/2 电源前面板1个电源开关，1个复位开关，2个USB电源指示灯，硬盘指示灯1个电源开关，1个复位开关，2个USB电源指示灯，硬盘指示灯,系统电源显示。
HITECH人机界面使用说明书
附件C.PWS1711/1760安裝說明PWS 1711/PWS 1760是㆒種配備有㆗型5.7”(320Hx240V)LCD 顯示螢幕及類比式觸控面板(Analog Resistive Touch Panel)此面板具有IP65(NEMA 4)的防水防塵工業級設計,適用於各種惡劣環境之高功能㆟機介面，其面板採用高亮度16灰階Mono-STN 或256色的Color-STN,使用者可以根據實際應用要求選擇不同機種。
PWS 1760之機種有LPT 印表埠,不僅可印出完整畫面且更可以自行設計表格,即時列印所須之報表。
PWS 1711是PWS 1700的替代品其軟體功能方面與PWS 1700相容,同樣是㆒種高功能的㆟機介面。
PWS1711/1760產品一般規格Item PWS1711-STN PWS1760-CTN Display Type Monochrome blue mode STN LCD, 16 gray levels Color mode STN LCD,256 gray levels Display Size 5.7" (diagonal)Number of Pixels 320x240Display Adjustment Contrast adjustable from touch screen Back Light CCFT; Life time is 20,000 hours under 25°C and &0%RH humidity Touch Screen Analog resistive type; Max. Number of switches are 40x30 Chemically strengthened glass backing panel;Over 1 million point activations;Hard coat is resistant to most solvents and chemicals Input Power 24VDC ±10%; Isolation; Under 12W CPU Intel 80188SA1100-166; 32bit RISC;166MHz Flash Memory 640K Bytes 1826K Bytes Battery Backed Memory X 64K Bytes Communication Ports COM1/9pin: RS232/RS485; COM2/25pin:RS232/RS422/RS485Printer Port X EPP printer port Front Panel Seal IP65 / NEMA 4Operating Temperature 0~50°C Storage Temperature -20~60°C Ambient Humidity 20-90% RH (non-condensing)Vibration Endurance 0.5mm displacement,10-55Hz, 2hours per X, Y, and Z-axis directions Shock Endurance 10g, 11ms three times in each direction of X, Y, and Z axes RF Emissions CISPR 22, Class A Electrostatic Discharge EN61000-4-2/1995RF Susceptibility ENV50140/1993High Frequency Transients EN61000-4-4/1995Weight 1.25 Kg Cooling Natural cooling C 、前言C-1、產品一般規格PWS WORKSTATIONC-2PWS-1711之外型尺寸及盤面開孔尺寸，如㆘圖之規格。
hitech 触摸屏使用手册
Hitech 触摸屏使用手册一、概述1.1 感谢您购物Hitech触摸屏产品。
本使用手册旨在向您介绍如何正确使用Hitech触摸屏，并为您提供使用过程中可能遇到的问题的解决方案。
1.2 在使用本产品前，请务必仔细阅读本手册并按照指示进行操作，以确保您能充分利用Hitech触摸屏的功能。
二、产品概述2.1 Hitech触摸屏是一种先进的人机交互设备，能够通过触摸操作实现对设备的控制和指令输入。
2.2 产品特点：灵敏的触摸响应、高清的显示效果、多点触摸支持、耐用的屏幕材料、易于安装和维护。
2.3 适用范围：工业自动化控制、商业展示展览、交互式广告媒体、智能家居控制等领域。
2.4 注意事项：请避免在触摸屏表面使用尖锐物体或过度施加压力，以免损坏屏幕。
三、使用指南3.1 开机和关机a) 开机：按下电源按钮并保持数秒，待屏幕亮起即表示开机成功。
b) 关机：进入系统设置界面，选择“关机”选项完成关机操作。
3.2 触摸操作a) 单点触摸：轻触屏幕即可完成单点触摸操作，适用于简单的选择、拖动等操作。
b) 多点触摸：使用两个以上手指在屏幕上进行操作，可以实现缩放、旋转等操作。
3.3 菜单操作a) 主菜单：轻触屏幕任意位置，弹出主菜单选项，可根据需求选择不同功能。
b) 设置菜单：进入系统设置菜单，可进行屏幕亮度调节、音量调节、语言选择等操作。
3.4 输入操作a) 虚拟键盘：在需要输入文字或数字时，触摸屏会自动弹出虚拟键盘，用户可通过触摸屏进行输入操作。
b) 手写输入：部分Hitech触摸屏产品支持手写输入功能，用户可直接用手指或专用笔进行书写，进行更自然的输入操作。
3.5 网络连接a) 有线连接：通过网线连接，可直接接入局域网或互联网，实现数据传输和上线操作。
b) 无线连接：部分Hitech触摸屏产品支持Wi-Fi连接功能，用户可通过无线网络进行数据传输和上线操作。
3.6 外接设备a) USB接口：部分Hitech触摸屏产品支持USB接口，用户可连接U 盘、键盘、鼠标等外部设备进行数据传输和操作。
TPC-1550H 1551H 工业触摸屏计算机用户手册说明书
User ManualTPC-1550H/1551HIndustrial Touch PanelComputers with Intel® Atom™ProcessorsCopyrightThe documentation and the software included with this product are copyrighted 2011 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How-ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-ments of the rights of third parties, which may result from its use. AcknowledgementsIntel and Pentium are trademarks of Intel Corporation.Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.All other product names or trademarks are properties of their respective owners.This Manual Covers the Following Models:⏹TPC-1550H⏹TPC-1551HPart No. 2003155000Edition 1Printed in Taiwan December 2011TPC-1550H/1551H User Manual iiProduct Warranty (2 years)Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of pur-chase.This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events.Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec-tive, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details.If you think you have a defective product, follow these steps:1.Collect all the information about the problem encountered. (For example, CPUspeed, Advantech products used, other hardware and software used, etc.) Noteanything abnormal and list any onscreen messages you get when the problemoccurs.2.Call your dealer and describe the problem. Please have your manual, product,and any helpful information readily available.3.If your product is diagnosed as defective, obtain an RMA (return merchandizeauthorization) number from your dealer. This allows us to process your returnmore quickly.4.Carefully pack the defective product, a fully-completed Repair and ReplacementOrder Card and a photocopy proof of purchase date (such as your sales receipt)in a shippable container. A product returned without proof of the purchase dateis not eligible for warranty service.5.Write the RMA number visibly on the outside of the package and ship it prepaidto your dealer.iii TPC-1550H/1551H User ManualDeclaration of ConformityCEThis product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.FCC Class ANote: This equipment has been tested and found to comply with the limits for a ClassA digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Opera-tion of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Technical Support and Assistance1.Visit the Advantech web site at where you can findthe latest information about the product.2.Contact your distributor, sales representative, or Advantech's customer servicecenter for technical support if you need additional assistance. Please have thefollowing information ready before you call:–Product name and serial number–Description of your peripheral attachments–Description of your software (operating system, version, application software, etc.)– A complete description of the problem–The exact wording of any error messagesTPC-1550H/1551H User Manual ivv TPC-1550H/1551H User ManualSafety Instructions1.Read these safety instructions carefully.2.Keep this User Manual for later reference.3.Disconnect this equipment from any AC outlet before cleaning. Use a dampcloth. Do not use liquid or spray detergents for cleaning.4.For plug-in equipment, the power outlet socket must be located near the equip-ment and must be easily accessible.5.Keep this equipment away from humidity.6.Put this equipment on a reliable surface during installation. Dropping it or lettingit fall may cause damage.7.The openings on the enclosure are for air convection. Protect the equipmentfrom overheating. DO NOT COVER THE OPENINGS.8.Make sure the voltage of the power source is correct before connecting theequipment to the power outlet.9.Position the power cord so that people cannot step on it. Do not place anythingover the power cord.10.All cautions and warnings on the equipment should be noted.11.If the equipment is not used for a long time, disconnect it from the power sourceto avoid damage by transient overvoltage.12.Never pour any liquid into an opening. This may cause fire or electrical shock.13.Never open the equipment. For safety reasons, the equipment should beopened only by qualified service personnel.14.If one of the following situations arises, get the equipment checked by servicepersonnel:⏹ The power cord or plug is damaged.⏹ Liquid has penetrated into the equipment.⏹ The equipment has been exposed to moisture.⏹ The equipment does not work well, or you cannot get it to work according tothe user's manual.⏹ The equipment has been dropped and damaged.⏹ The equipment has obvious signs of breakage.15.DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THESTORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENTSHOULD BE IN A CONTROLLED ENVIRONMENT.16.CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLYREPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A).DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantechdisclaims all responsibility for the accuracy of any statements contained herein.Caution!Danger of explosion if battery is incorrectly replaced. Replace only withthe same or equivalent type recommended by the manufacturer. Dis-pose of used batteries according to the manufacturer's instructions.TPC-1550H/1551H User Manual viChapter1General Information (1)1.1Introduction (2)1.2Specifications (2)1.2.1System Kernel (2)1.2.2I/O Ports (2)1.2.3Safety and Environment (3)1.3LCD Specifications (3)1.4Touchscreen Specifications (3)1.5Power (4)1.6I/O Ports Arrangement (4)Figure 1.1TPC-155OH - I/O Port Arrangement (4)Figure 1.2TPC-1551H - I/O Port Arrangement (4)1.7Panel Mounting (5)Figure 1.3Panel Mounting (5)1.8Dimensions and Cutout (5)Figure 1.4TPC-1550H Dimensions (6)Figure 1.5TPC-1551H Dimensions (7)Chapter2System Setup (9)2.1System Setup (10)Figure 2.1Unpack the Package (10)Figure 2.2Install CompactFlash Memory Card (11)Figure 2.3Power Connector and Power Lines (11)Figure 2.4Power Receptor & Button Pin Assignment (12)2.1.1Installing the Drivers (12)Chapter3Features in Windows XP Embedded153.1Features in Windows XP Embedded (16)3.2EWF (16)3.3HORM (16)Appendix A Serial Port Settings (17)A.1Jumper Settings & Connector List (18)A.2Pin Assignment (18)A.3RS-485 / RS-422 Setting (19)vii TPC-1550H/1551H User ManualTPC-1550H/1551H User Manual viiiChapter11.1IntroductionThe TPC-1550H and TPC-1551H Touch Panel Computers are state-of-the-art Human Machine Interfaces featuring 15" displays with Intel Atom eMenlow XL pro-cessors and the following key features:⏹FanlessBy using a low-power processor, the system does not have to rely on fans,which often are unreliable and causes dust to circulate inside the equipment.⏹Bright DisplayThe TFT LCD display suits industrial demands for clear interfaces. Wide Oper-ating Temperature & Isolation Protection (TPC-1551H Only) These productsprovide a -20 ~ 60° C wide operating temperature solution and complete isola-tion 2KV protection for their serial ports.⏹Windows CE SupportIn addition to the OS support of Windows XP, Advantech offers platform supportfor Windows CE and Windows XP embedded. The optional Windows CE oper-ating system specifically for Industrial Touch Panel Computers is also available.⏹Energy Star Approval1.2Specifications1.2.1System Kernel⏹CPU: Intel® Atom™ N270H 1.6GHz (1550H) Z520 1.33GHz (1551H)⏹BIOS: Award 4 Mbit flash BIOS⏹System Chipset: 945GSE + ICH7M (1550H)eMenlow XL + Poulsbo (1551H)⏹VGA: Integrated in 945GSE (1550H) eMenlow XL (1551H)⏹Ethernet: 10/100/1000Base-T⏹Watchdog Timer:–TPC-1550H: W83627DHG watchdog timmer; 1.6 second timeout period–TPC-1551H: SCH3114X1 watchdog timer; 1.6 second timeout period⏹Storage: CompactFlash® slot or SATA HDD x 1 (TPC-1550H only CF forstorage)1.2.2I/O PortsTPC-1550H:⏹ 2 serial ports: RS-232 x 2 (w/o isolation)⏹ 1 RJ-45 Ethernet port⏹ 2 USB 2.0 Ports: compliant with USB 1.0 and 1.1. (Host)TPC-1551H:⏹ 2 serial ports: RS-232 x 1 (w/ isolation), RS-422/485 x 1 (w/ isolation)⏹ 2 RJ-45 Ethernet port⏹ 2 USB 2.0 Ports: compliant with USB 1.0 and 1.1. (Host)TPC-1550H/1551H User Manual23TPC-1550H/1551H User ManualChapter 1General Information1.2.3Safety and EnvironmentSafety⏹FCC Class A ⏹CE certificated⏹The front bezel is compliant with NEMA 4 and IP65 Environment⏹Operating Temperature:–0 ~ 45° C (32 ~ 113° F) TPC-1550H –-20 ~ 60° C (-4 ~ 140° F) TPC-1551H ⏹Storage Temperature:–-20 ~ 60° C (-4 ~ 140° F) TPC-1550H –-30 ~ 80° C (-22 ~ 176° F) TPC-1551H⏹Humidity: 40° C @ 10~95% relative humidity (non-condensing)⏹Vibration: 2 grms (5 ~ 500 Hz) with CF Card, 1 grm with HDD kit (1551H)1.3LCD Specifications1.4Touchscreen Specifications⏹Touch Type: Resistive⏹Base Glass Construction: Tempered glass ⏹Resolution: 1024 x 1024⏹Light Transmission: 80% ± 3% (Measured by BYK-Gardner) ⏹Controller: USB Interface (1550H), RS-232 Interface (1551H) ⏹Lifespan: 1 million touches at single pointTPC-1550H / TPC-1551HDisplay Type TFT LCD Size (diagonal)15°Maximum Resolution 1024 x 768 (XGA) Maximum Colors 262K Viewing Angle 160°/140°Luminance (cd / m2)350 Contrast Ratio700:1 Operating Temperature -30 ~ 85° C BacklightLEDNote!There might be several bright or dark pixels on the LCD. This phenome-non is normal in today’s LCD manufacturing.TPC-1550H/1551H User Manual41.5Power⏹Input Voltage: 18 - 28 V DC (the fuse will become an open circuit if the input level exceeds 29 V DC ) 1550H⏹Input Voltage: 18 - 32 V DC (the fuse will become an open circuit if the input level exceeds 33 V DC ) 1551H⏹Typical: 24 V DC @ 1.54 Amp (1550H) 24 V DC @ 1.33 Amp (1551H)1.6I/O Ports ArrangementThe arrangement of the I/O ports is shown in in Figure 1.1 and 1.2.Figure 1.1 TPC-155OH - I/O Port ArrangementFigure 1.2 TPC-1551H - I/O Port ArrangementNote!Touchscreen ITO maybe crash duo to heavy usage .5TPC-1550H/1551H User ManualChapter 1General Information1.7Panel Mounting1.There is an adhesive waterproof gasket on the AL front bezel. Make sure the waterproof gasket is in position before installing TPC into the panel opening. 1.Install the TPC into the panel opening.2.Find the eight clampers and eight long screws in the accessory pack. Hook the clampers to the holes around the four sides of the bezel. Insert the screws into every clamper and fasten them. These screws will push the mounting panel and fix the unit.3.The suggested mounting panel thickness is less than 6 mm (0.236”).Figure 1.3 Panel Mounting1.8Dimensions and Cutout⏹Weight: 3 kg⏹Dimensions (W x H x D): 383 x 307 x 58.1 mm (15.08" x 12.09" x 2.29")⏹Cutout:374.5 x 298.5 mmFigure 1.4 TPC-1550H Dimensions TPC-1550H/1551H User Manual6Chapter 1 Array GeneralInformationFigure 1.5 TPC-1551H Dimensions7TPC-1550H/1551H User ManualTPC-1550H/1551H User Manual8Chapter2TPC-1550H/1551H User Manual 102.1System SetupYou can easily get TPC started by following the below steps.1.Unpack the TPC package. Check the packing list at the beginning of this manualto make sure all items have been included.Figure 2.1 Unpack the Package11TPC-1550H/1551H User ManualChapter 2System Setup2.Install a CompactFlash ® card containing Windows CE, Embedded Windows XP or another operating system.Figure 2.2 Install CompactFlash Memory Card3.Connect the power connector to the 24 V DCpower lines. The power lines can either be of some power adapter or in-house power source.Figure 2.3 Power Connector and Power LinesWarning!It is suggested to turn OFF system power as you plug in or pull out thememory card, even though the CompactFlash memory is hot swappa-ble.Figure 2.4 Power Receptor & Button Pin Assignment4.Plug the power lines into the system power receptor.5.Push the power button to power on the system (figure 2.4).6.Calibrate the touchscreen (click "PM" in the bottom corner).2.1.1Installing the DriversAfter installing your system software, you will be able to set up the Ethernet, VGA, and touchscreen functions. All drivers are stored in a CDROM disc entitled “TPC-1550H or TPC-1551H” which can be found in your accessory box.The various drivers in the CD-ROM disc have their own text files which help users install the drivers and understand their functions. These files are a very useful sup-plement to the information in this manual.Note!If you want to install the touchscreen driver & use the touchscreen utility, please refer the user manual which is "PenMount 6000 Installation-Guide" in the CD-ROM.Note!The drivers and utilities used for the TPC-1550H and TPC-1551H panel PCs are subject to change without notice. If in doubt, check Advantech'swebsite or contact our application engineers for the latest informationregarding drivers and utilities.TPC-1550H/1551H User Manual12Chapter 2SystemSetup 13TPC-1550H/1551H User ManualTPC-1550H/1551H User Manual14Chapter33.1Features in Windows XP EmbeddedTPC product supports the embedded Windows platform. This section outlines the important features (EWF and HORM), that are provided in Windows XP embedded.3.2EWFEWF stands for Enhanced Write Filter. It provides an upper filter in the storage device driver stack that redirects disk write operations to volatile (RAM) or non-volatile (disk) storage. EWF protects a volume from write access. The benefits are as the following.Write-protect one or more partitions on your system.Enable read-only media, such as CD-ROM or flash, to boot and run.Prolong the lifespan of write-sensitive storage, such as CompactFlash.TPC-1550H/1551H XPE provides EWF RAM-REG mode on system partition. All wirte to system partition will be redirected to RAM once this mode is enabled. This mode is manually enabled by customers after theyfinish all their changes on system such as installing their applications or adjusting system setting.Advantech provides a pair of utilities to operate EWF, OSLock andOSUnLock. Please refer the training slide in the folder, file name is "Advantech XPe Add-one.pdf". 3.3HORMHORM stands for Hibernate Once Resume Many. In HORM environment, a single hibernation file is used to boot the system repeatedly. To set a HORM environment, please follow the steps below.Please make sure EWF is disabled. You can run OSUnLock to disable EWF.Enable hibernation support:Run “power options” in control panel, and then select “Enable Hibernation” in hiber-nation pane.Enable EWF:Run OSLock, and then system reboot automatically.Open those software that customers want to directly use after system resume from hibernation.Hibernate via Advantech HORM utility:Please Click Start Menu->All Programs->Advantech->AdvWFHORM environment remains all along unless the following events occur:Run EWF commit command (ewfmgr c: -commit) and then reboot system.Select “Discard hibernation file” by clicking F8 when system is starting up.TPC-1550H/1551H User Manual16Appendix AA.1Jumper Settings & Connector ListIf you need the jumper settings or connector list. Please refer the PDF file inthe driver CD. TPC-1551H only.The file name is "jumper Settings & Connector List_v1.0.pdf".A.2Pin AssignmentTPC-1550HTPC-1551HCOM1COM2 PIN RS-232PIN RS-232 1NDCD1NDCD 2NRX2NRX3NTX3NTX4NDTR4NDTR 5GND5GND6NDSR6NDSR 7NRTS7NRTS 8NCTS8NCTS 9NRI9NRICOM1COM2 PIN RS-232RS-422RS-485 1NDCD TX-D-2NRX TX+D+3NTX RX+4NDTR RX-5GND GND GND6NDSR7NRTS8NCTS9NRITPC-1550H/1551H User Manual1819TPC-1550H/1551H User Manual Appendix A Serial Port SettingsA.3RS-485 / RS-422 Setting1.Choose integrated peripherals.2.Choose serial port 2 mode.3.Choose RS-485 or RS-422 for serial port and then save the change.TPC-1550H/1551H User Manual20Appendix ASerial PortSettings 21TPC-1550H/1551H User Manual。
1-2-1 ICP DAS CO., LTD. 触摸PAD-E HMI设备说明书
1T o u c hHM I D e v i c e s2T P D S e r i e sT P D -280/T P D -280U /T P D -283/T P D -283-B K /T P D -283UTPD-280/TPD-280U/TPD-283//TPD-283U, is a series of tiny touch HMI and designed for building and home automation. TPD-280/TPD-280U/TPD-283/TPD-283U is equipped with high resolution TFT color touch screen and fi ts in with regular electrical wall-mount outlet. Besides, it is seamlessly integrated with rich I/O modules and presents beautiful, fl exible and user-de fi ned picture frame. In short, it is the best choice to upgrade the mechanical switch to intelligent control pads.For PLC users, HMIWorks provides Ladder Designer , and for IT users, C language environment is provided. Especially, it only takes no more than 30 minutes to learn how to create an application program of TPD-series devices when using Ladder Designer . Moreover , we provide redundant solutions in our PoE version, TPD-283, of TPD-series HMI devices. With all the features provided, TPD-series touch HMI Devices must be the most cost effective HMI Device ever been in the market.TPD-280/TPD-280U/TPD-283/TPD-283U with External Wall Box EWB-T28The space between the Ethernet plug and the bottom of the external wall box is too small.TPD-280/TPD-280U/TPD-283/TPD-283U with Outlet Box OB120Excellent C/P ratio (cost/performance) High-resolution color touch screen PoE (Power over Ethernet) RS-485 (including Self-Tuner) RTC (Real Time Clock) GUI designFree HMIWorks development toolSupports the popular C programming language Supports Ladder Designer Modbus TCP protocol ESD Protection: 4 kVOperating temperature: -20 ~ 70°CTPD-280TPD-283/TPD-283-BKTPD-280UTPD-283UIntroductionApplicationsTouch HMI DevicesTouch HMI Devices1TPD Series2TPD-280/TPD-280U/TPD-283/TPD-283-BK/TPD-283UIntelligent Building ExampleTemperature Control ExampleSingle-way, Two-way, Multi-way Switches ExampleClassroom Automation ExampleApplications1T o u c h H M I D e v i c e s2T P D S e r i e sT P D -280/T P D -280U /T P D -283/T P D -283-B K /T P D -283UCPU Module CPU32-bit RISC CPUMemory Expansion -16 MB SDRAM / 8 MB Flash-16 MB SDRAM / 8 MB FlashReal Time Clock (RTC)-Yes-YesBuzzerYes Rotary Switch (0~9)YesCommunication Interface Ethernet -RJ-45 x 1, 10/100 Base-TXSerial Port RS-485 (including Self-Tuner)-RS-485 (including Self-Tuner)USB 1.1 Client-Firmware updates only-Firmware updates onlyMMI (Main Machine Interface)LCD2.8” TFT (Resolution 240 x 320 x 16), defective pixels <= 3Backlight Life 20,000 hours Brightness 160 cd/m2Touch Panel Yes Reset Button YesElectrical Power Input Range +10 ~ 30 V DC Power over Ethernet (PoE)+10 ~ 30 V DC orPoE (Power over Ethernet)Power Consumption1.2 W (50 mA @ 24 V DC )IEEE 802.3af, Class 11.2 W (50 mA @ 24 V DC ) orIEEE 802.3af, Class 1MechanicalDimensions (W x L x H)76 mm x 119 mm x 31 mmInstallation Wall Mount Ingress Protection Front Panel: IP40Environmental Operating Temperature -20 ~ +70 °C Storage Temperature -30 ~ +80 °CAmbient Relative Humidity10 ~ 90% RH, non-condensing Speci fi cationsAppearancePin AssignmentsTPD-280/TPD-280U/TPD-283/TPD-283U Front ViewTPD-280 Rear ViewTPD-280U Rear ViewTPD-283 Rear View TPD-283U Rear ViewRotary Switch Rotary Switch Rotary Switch Rotary SwitchRS-485RS-485RS-485Ethernet Ethernet 2.8” TFT LCD with Touch PanelUSB USBTouch HMI DevicesTouch HMI Devices1TPD Series2TPD-280/TPD-280U/TPD-283/TPD-283-BK/TPD-283U7.37.3Top View Bottom ViewRight View Left View Front View Rear ViewOrdering InformationTPD-280 CR 2.8” Touch HMI device with RS-485 (RoHS)TPD-280U CR 2.8” Touch HMI device with RS-485, USB, RTC (RoHS)TPD-283 CR 2.8” Touch HMI device with Ethernet (RoHS)TPD-283-BK CR 2.8” Touch HMI device with Ethernet (RoHS)TPD-283U CR2.8 Touch HMI device with RS-485, USB, RTC, Ethernet (RoHS)AccessoriesCA-USB10USB to 5P Mini-USB, 28AWG, 1.5 m1C016 2.4 mm Screw driver NS-208PSE CRUnmanaged Industrial PoE (Power over Ethernet) Ethernet Switch (RoHS)MDR-60-24 CR 24 V DC /2.5 A, 60 W Power Supply with DIN-Rail Mounting (RoHS)DIN-KA52F CR24 V DC /1.04 A, 25 W Power Supply with DIN-Rail Mounting (RoHS)EWB-T28External Wall Box for TPD-280/TPD-280U/TPD-283/TPD-283U DevicesOB120Outlet Box for TPD-280/TPD-280U/TPD-283/TPD-283U/TPD-430/TPD-433 DevicesLC-103Lighting Control Module with RS-485Dimensions (Units: mm)Top View Bottom ViewRight View Left View Front View Rear View。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
TPC1262Hi，是一套以嵌入式低功耗CPU为核心（主频600MHz）的高性能嵌入式一体化工控机。该产品设计采用了12.1英寸高亮度TFT液晶显示屏（分辨率800×600），四线电阻式触摸屏（分辨率1024×1024）。
产品特性
液晶屏
12.1"TFT液晶显示，真彩（LED背光），分辨率（800×600）
认证防护
认证
CE/FCC
防护等级
IP65（前面板）
抗干扰性
工业三级
软件
组软件
MCGS嵌入版组态软件7.5（运行版）
净重
3.9kg
外部接口
串口
1×RS232、1×RS232/485、
1×RS232、1×RS485
USB
2主
以太网
RJ45以太网口
环境条件
工作温度
0℃~50℃
工作湿度
5%~90%
储存温度
-10℃~60℃
振动频率
10-57Hz 57-150Hz
振动加速度
0.075mm 9.8 m/s2
振动扫频速率
Oct/min ≤1
显示颜色
65535色
背光寿命
50,000小时
触摸屏
四线电阻式
供电电源
DC24V/17W
CPU主板
ARM结构嵌入式低功耗CPU为核心，主频600MHz
内存
128M
存储设备
128M NAND Flash
铁电存储
16KB
SD卡存储
内置4G
产品规格
结构
铝合金结构
颜色
深灰色
面板尺寸
323*246mm
机柜开孔
303mm×226mm