跑步机部件测试标准

Power Board Test Procedure 配电板 Transformers 变压器 Temperature Tests- Full Unit 整机温度测试 Incline Lift Motor Test 扬升马达 -Static Resistance and Inductance measurement (Check against drawing specification) -Speed test -Lift and brake test -Hypot test -Temperature stabilization test (1 cycle/5 minutes) -Nuisance temperature test (1 cycle/2 minutes) -Locked rotor test -Impact cycle test -Cycle life test (Standard-2,000 cycles, Specialty fitness, 3,000 cycles) -Human lift test
源自文库
cified shock)
l) 折叠插销
TREADMILL COMPONENTS TEST STANDARD 电跑部件测试标准 Treadmill Walking Belt 跑带 -Wax retention test (72 hours, 55 degrees C) -Durability and performance test (200 hours human testing) -Static dissipation test (10 M OHMS) -Stretch test Treadmill Walking Deck 跑板 -Fracture test (Depends on width) -Surface finish friction test (To print) -Durability and performance test (200 hours human testing) Treadmill Walking Belt Lubricant 硅油 -Temperature extremes test (55 degrees C drip, Sub-freezing) -Performance test (200 hour human testing) -Time test (6 month) Treadmill Poly-V Belt (Drive belt) 驱动带 -Mechanical test (200 hour, full speed) -Human test (200 hour) Treadmill Deck Isolators -Mechanical test (Cycle test, 20”-lb test -Human test (30 hours) Treadmill Incline Shock 扬升 -Force test -Cycle test (2,000 repetitions) -Performance test (In product) Treadmill lift assist shock -Force test -Seal test (4,000 repetitions) -Performance test (In product) -Lift assist shock brackets (1,000 lb max load, 4000 cycles with specified shock) Manual Treadmill Resistance Strap 手动电跑阻力带 Upper Body Resistance Mech -200 hours mechanical
Treadmill Roller Pulleys 滚筒滑轮 Adhesion to roller Treadmill Roller Sleeve 滚筒轴套 Treadmill Rollers 滚筒 -350 lb, 10 mph, 300 hrs Treadmill Spring Cushion Rear Feet 后脚弹簧垫 -Static bend test -Cycle fatigue test Treadmill Deck Rails (Will test if presented) -Environmental test: 55 degrees c, high humidity -Human test: 200 hours Treadmill Frame Latch- (Test for each new design of a treadmill) 折叠插销 -Tip and release test -Lateral force test Walking Belt Foam Material 跑带泡沫材料 -Amp draw -200 hours human Adhesive (Decals, Tape, etc) 胶水（标贴等） -Cold application -Temperature cycling -Shear Console Test Procedure (Final) 电子表 DC Motor Testing Procedure 直流电机 -Resistance and inductance -Voltage and Torque constants -Input measurements -Brushlife test -Temperature stabilization test: full speed 200 lb load or rated load -Overload test: 2 mph nuisance trip -2 mph with increased load -Human life test -Locked rotor test -Hypot test -Demagnetization test Motor Controller Test Procedure 电机控制器 Choke Test 阻塞测试