适航法规培训测试(国航)

适航法规培训测试TEST - Legislation Training1 EASA is ( A )A.European Aviation Safety AgencyB.European Airworthiness Safety AgencyC.European Airworthiness Supervise Agency2 Foreign Part-145 MRO doesn't report the Occurrence reporting to？( B )A.EASAB.NAAC.Operator or customer3 Regulation NO.1321/2014 is an Implementing rules for ( B ）A.Initial AirworthinessB.Continuing AirworthinessC.Both of them4 In Regulation NO.1321/2014,Part-M,Part-145,Part-66 and Part-147 are ( A ）A.Hard lawsB.Soft lawsC.both A and B5 The content of MSDS includes ( B )A.hazards summarizing, fire-fighting measures,accidental release measures,handling and storage,first-aidB.hazards summarizing, fire-fighting measures,accidental release measures,handling and storage,first-aid,disposal,ingredientsC.accidental release measures,handling and storage,first-aid,disposal,ingredients6 The content in Part-145 related to ( B )A.certifying staff licensesB.maintenance organization approvalC.continuing airworthiness approval7 Considering the scope, the continuing airworthiness of aircraft, including any component for installation thereto, which are ( C )A.registered in a Member State, unless their regulatory safety oversight has been delegated to a third country and they are not used by an EU operator;B.registered in a third country and used by an EU operator, where their regulatory safety oversight has been delegated to a Member State;C.A + B8 The competent authority for XJAMB is ( B )A.NAAB.EASAC.EU9 Which one is NOT right about the safety and quality policy? ( C )A.The primary objectives of the quality system are to enable the organisation to ensure that it can deliver a safe product and that organisation remains in compliance with the requirements.B.An essential element of the quality system is the independent audit.C.The independent audit checks some aspects of the organisation’s ability to carry out all maintenance to the required standards10 Class System to be used for the Approval of Maintenance Organizations are ( A )A:Aircraft,B:Engines,C:Components other than complete Engines or APUs,D:Specialized servicesA. A,B,C,DB. A,B,CC. A,B,D11.An application for the issue or change of an approval shall be made to the competent authority on an ( B )A.EASA Form 1B.EASA Form 2C.EASA Form 412 Which one is NOT right about the facility requirement? ( C )A.For base maintenance of aircraft, aircraft hangars are both available and large enough to accommodate aircraft on planned base maintenance;B.Office accommodation is provided for the management of the planned work referred to in point (a), and certifying staff so that they can carry out their designated tasks in a manner that contributes to good aircraft maintenance standards.C.It's not necessary that dust and any other airborne contamination are kept to a minimum and not be permitted to reach a level in the work task area.13 The accountable manager shall appoint ( A ) with responsibility for monitoring the quality system, including the associated feedback systemA.quality managerB.maintenance managerC.certifying staff14 哪一种情况需要在发生变化之前告知当局/which situation should the maintenance organisation notify the competent authority before such change take place? (C)A.责任经理的变更change of the accountable managerB.维修单位名称变更change of the name of organisationC.A和B都对both A and B15 Competence should be defined as a measurable skill or standard of ( A ).A.performance, knowledge and understanding, taking into consideration attitude and behaviorB.B.performance, knowledge and understandingC.attitude and behavior16 Competence should be assessed by evaluation of ( C )①on-the-job performance and/or testing of knowledge by appropriately qualified personnel②records for basic, organisational, and/or product type and differences training③experience recordsA.②③B.①②C.①②③17 Which of the following rule is NOT directly related to maintenance? ( C )A.Part-66B.Part-147C.Part-2518 The category C certifying staff shall assess the impact of any work not carried out with a view to either requiring its accomplishment or agreeing with the ( A ) to defer such work.A.operatorB.EASAC.nobody19 B1 and B2 support staff shall ensure that all relevant tasks or inspections have been carried out to the required standard before the category ( A ) certifying staff issues the certificate of release to service. A.C B.C1 C.C220 For A/C certifying and support staff not qualified to EASA Part-66 , ( C )(1)The person shall hold a license or a certifying staff authorisation issued under national regulations in full compliance with ICAO Annex 1.(2)The person shall demonstrate he/she received the training on human factors and aviation legislation referred to in modules 9 and 10.(3) C/S and S/S shall demonstrate he/she received type trainingA. 1B. 1,2C.1,2,321 The person shall demonstrate ( C ) years for base maintenance certifying staff.A. 3B.5C.822 For the purpose of Part-145, the production planning function includes (C ) complementary elements:A.scheduling the maintenance work ahead, to ensure that it will not adversely interfere with other work as regards the availability of all necessary personnel, tools, equipment, material, maintenance data and facilities.B.during maintenance work, organizing maintenance teams and shifts and provide all necessary support to ensure the completion of maintenance without undue time pressure.C.both A and B/A和B23 The organization shall ensure that all certifying staff and support staff receive sufficient continuation training in each ( B ) year period to ensure that such staff have up-to-date knowledge of relevant technology,organisation procedures and human factor issues.A.oneB.twoC.three24 What does airworthiness include? ( C )A.Initial AirworthinessB.Continuous AirworthinessC.A+B25 The use of alternative tooling or equipment is ( A )A.agreed by the competent authority via procedures specified in the exposition.B.not permitted.C.OK26 Tooling and equipment should be clearly ( B ) in a control register.A.identifiedB.identified and listedC.listed27 EASA Form 1 is normally issued to ( B )A.standard partsponentsC.Consumable material28 The purpose of the certificate is （C ）A.to release assemblies/items/components/parts (hereafter referred to as ‘item(s)’) after maintenance and to release maintenance work carried out on such items under the approval of a competent authorityB.to allow items removed from one aircraft/aircraft component to be fitted to another aircraft/aircraft component.C.A+B29 Where is European Aviation Safety Agency located? (A)A.Germany30 Reconstruction of lost or destroyed records can not be done by ( B )A.reference to other records which reflect the time in service, research of records maintained by repair facilitiesB.reference to other records by EASAC.Additional maintenance may be required.。