手机射频校准错误代码表
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
手机射频校准错误代码表(适用于展讯,MTK)
Lacation update Fail = 101;位置更新错误
MT Call Fail = 102;手机呼叫失败
Call Drop = 103;掉线
Average Burst Power Fail = 104;平均突发功率超出模板
Peak Burst Power Fail = 105;峰值突发功率超出模板
PVT Match Fail = 106; PVT超出模板
Timing Error Fail = 107;时序偏差超出模板
Phase Error Peak Fail = 108;峰值相位误差超出模板
Phase Error RMS Fail = 109;均值相位误差超出模板
Frequency Error Fail = 110;频率误差超出范围
Spectrum due to Modulation Fail = 111;调制频谱超出模板
Spectrum due to Switching Fail = 112;开关频谱超出模板
Rx Quality Fail = 113;接收灵敏度超出范围
Rx Level Fail = 114;接收电平超出范围
BER Fail = 115;误码率超出范围
BLER Fail = 116;误块率超出范围
METAAPP_GET_A V AILABLE_HANDLE_FAIL = 201;Meta可用到的操作失败
METAAPP_OPEN_UART_FAIL = 202;Meta打开Uart口失败
METAAPP_CLOSE_UART_FAIL = 203;Meta关闭Uart口失败
METAAPP_BOOT_FAIL = 204;Meta连通串口失败
METAAPP_BOOT_STOP_FAIL = 205;Meta终止连通串口失败
METAAPP_INIT_FAIL = 206;Meta初始化失败
METAAPP_W AIT_FOR_TARGET_READY_FAIL = 207;Meta等待被测件准备失败
METAAPP_COMM_SET_BAUD_RA TE_FAIL = 208;Meta命令设置波特率失败
METAAPP_COMM_START_FAIL = 209;Meta命令开始失败
METAAPP_COMM_STOP_FAIL = 210;Meta命令终止失败
METAAPP_CONNECT_WITH_TARGET_FAIL = 211;Meta连接被测件失败
METAAPP_DISCONNECT_WITH_TARGET_FAIL = 212;Meta断开被测件失败
METAAPP_RF_SELECT_BAND_FAIL = 213;Meta选择射频频段失败
METAAPP_RF_SELECT_BAND_CNF_FAIL = 214
METAAPP_RF_AFC_MEASURE_FAIL = 215;Meta测量AFC失败
METAAPP_RF_AFC_MEASURE_CNF_FAIL = 216;Meta测量AFC配置失败
METAAPP_RF_AFC_SET_DAC_V ALUE_FAIL = 217;Meta设置数模转换电压失败
METAAPP_RF_AFC_SET_DAC_V ALUE_CNF_FAIL = 218;Meta设置数模转换电压配置失败METAAPP_RF_CRYSTALAFC_SET_CAPID_FAIL = 219;Meta控制晶体设置CAPID失败METAAPP_RF_PM_FAIL = 220;Meta控制电源管理失败
METAAPP_RF_NB_TX_FAIL = 221;Meta控制邻道发射失败
METAAPP_RF_NB_TX_CNF_FAIL = 222;Meta控制邻道发射配置失败
METAAPP_RF_SET_APC_LEVEL_DAC_FAIL = 223;Meta设置APC等级数模转换控制失败METAAPP_RF_SET_APC_LEVEL_DAC_CNF_FAIL = 224;Meta设置APC等级数模转换配置失败METAAPP_RF_STOP_FAIL = 225;Meta终止失败
METAAPP_RF_STOP_CNF_FAIL = 226;Meta终止配置失败
METAAPP_RF_BBTXAUTOCAL_FAIL = 227;Meta控制基带发射自动校准失败
METAAPP_RF_GETBBTXCFG2_FAIL = 228
METAAPP_RF_SETBBTXCFG2_FAIL = 229
METAAPP_RF_SETAFCSINEW A VEDETECT_FAIL = 230
METAAPP_RF_SET_MT6140CW2_TO_REG_FAIL = 231
METAAPP_RF_GET_MT6140ACODE_FROM_REG_FAIL = 232 METAAPP_RF_GET_RFID_FAIL = 233
METAAPP_RF_GET_IMMEIDATE_BSI_FAIL = 234
METAAPP_RF_SET_IMMEIDATE_BSI_FAIL = 235
METAAPP_RF_MULTISLOT_TX_FAIL = 236;Meta控制多时隙发射失败METAAPP_RF_EPSK_SET_APC_LEVEL_DAC_FAIL = 237
METAAPP_NVRAM_INIT_FAIL = 238;Meta控制NVRAM初始化失败METAAPP_NVRAM_AFC_SLOPE_INV ALID_FAIL = 239
METAAPP_NVRAM_AGC_PA THLOSS_LEN_FAIL = 240
METAAPP_NVRAM_GET_REC_LEN_FAIL = 241
METAAPP_NVRAM_GET_RAMPTABLE_LEN_FAIL = 242
METAAPP_NVRAM_COMPOSE_AGC_PATHLOSS_FAIL = 243 METAAPP_NVRAM_DECOMPOSE_AGC_PATHLOSS_FAIL = 244 METAAPP_NVRAM_COMPOSE_RAMPTABLE_FAIL = 245 METAAPP_NVRAM_DECOMPOSE_RAMPTABLE_FAIL = 246 METAAPP_NVRAM_SET_REC_FIELD_V ALUE_FAIL = 247 METAAPP_NVRAM_GET_REC_FIELD_V ALUE_FAIL = 248 METAAPP_NVRAM_COMPOSE_ADC_CAL_TABLE_FAIL = 249 METAAPP_NVRAM_DECOMPOSE_ADC_CAL_TABLE_FAIL = 250 METAAPP_NVRAM_COMPOSE_BARCODE_FAIL = 251
METAAPP_NVRAM_DECOMPOSE_BARCODE_FAIL = 252 METAAPP_NVRAM_COMPOSE_IMEI_FAIL = 253
METAAPP_NVRAM_DECOMPOSE_IMEI_FAIL = 254
METAAPP_NVRAM_COMPOSE_IP2_FAIL = 255
METAAPP_NVRAM_DECOMPOSE_IP2_FAIL = 256
METAAPP_NVRAM_WRITE_FAIL = 257
METAAPP_NVRAM_WRITE_CNF_FAIL = 258
METAAPP_NVRAM_READ_FAIL = 259
METAAPP_NVRAM_READ_CNF_FAIL = 260
METAAPP_NVRAM_COMPOSE_SECURITY_FAIL = 261
METAAPP_NVRAM_DECOMPOSE_SECURITY_FAIL = 262 METAAPP_NVRAM_GET_TXIQ_LEN_FAIL = 263
METAAPP_NVRAM_COMPOSE_TXIQ_FAIL = 264
METAAPP_NVRAM_DECOMPOSE_TXIQ_FAIL = 265
METAAPP_NVRAM_COMPOSE_SETTINGBAND_FAIL = 266 METAAPP_NVRAM_DECOMPOSE_SETTINGBAND_FAIL = 267 METAAPP_NVRAM_COMPOSE_CUST_ACOUSTIC_FAIL = 268 METAAPP_NVRAM_DECOMPOSE_CUST_ACOUSTIC_FAIL = 269 METAAPP_NVRAM_LOCK_FAIL = 270
METAAPP_FILE_READ_FAIL = 271
METAAPP_FILE_WRITE_FAIL = 272
METAAPP_IMEI_CALCULATE_CD_FAIL = 273
METAAPP_ADC_READ_FROM_NVRAM_CNF_FAIL = 274
METAAPP_ADC_MEASURE_FAIL = 275
METAAPP_ADC_MEASURE_CNF_FAIL = 276
METAAPP_GET_VERSION_INFO_FAIL = 277