台湾AOT灯珠产品规格书3020系列

CD0WW0000-AG00/AG01
Page 3 of 15
Optical/Electronic Characteristics (Ta=25°C)
Item Forward Voltage Luminous Intensity Color Temperature Reverse Current Color Rendering Index
CIE - Y
0.350
0.330 0.350 0.370 0.390 0.410 0.430 0.450 0.470 0.490 0.510
CIE - X
Chromaticity coordinate groups are measured with an accuracy of ±0.01.
CCT 2700K 3000K 3500K
Materials Heat-Resistant Polymer Silicone Resin(with phosphor) Ag Plating Copper Alloy
• Single blue chip. • High brightness SMD. • Compact package outline (LxWxH) of 3.0 mm x 2.0 mm x 1.3 mm. • Compatible with reflow soldering. • Complies with RoHS Directive.
CD0WW0000-AG00/AG01
Page 5 of 15
Preliminary
Group Definition of Chromaticity Coordinate 0.470
0.450 0.430 0.410 0.390 0.370
3500 K
3000 K
e1 e2
f3
f6 f5
2700 K f4
Wavelength λ (nm)
90 o
0
CD0WW0000-AG00/AG01
Page 7 of 15
Preliminary
Recommended Reflow Soldering Conditions
Surface Mounting Condition
In automatic mounting of the SMD LEDs on printed circuit boards, any bending, expanding and pulling forces or shock against the SMD LEDs should be kept min. to prevent them from electrical failures and mechanical damages of the devices.
60-150sec
Preheat 60-120sec
Ramp down 6 oC/sec Max.
360sec Max
100
150
200
Time (sec)
CD0WW0000-AG00/AG01
Page 8 of 15
2) Lead-free Solder
Preliminary
Temperature (oC)
Group Definition of Brightness
Rank W500 W525 W550 W575 W600 W625
Condition
Ta=25oC IF=20mA
Iv(lm) 5.00 ~ 5.25 5.25 ~ 5.50 5.50 ~ 5.75 5.75 ~ 6.00 6.00 ~ 6.25 6.25 ~ 6.50
heating/cooling may cause electrical & optical failures and damages of the devices. -AOT cannot guarantee the LEDs after they have been assembled using the solder dipping method.
CD0WW0000-AG00/AG01
Page 2 of 15
Package Outline Type Number: CD0WW0000-AG00 CD0WW0000-AG01 Unit: mm, Tolerance: ± 0.1 mm
Preliminary
Item Package Encapsulating Material Electrode
Ramp down 6 oC/sec Max.
480sec Max
100
150
200
Time (sec)
3) Manual Soldering Conditions
- Lead Solder Max. 300 oC for Max. 3sec, and only one time.
- Lead-free Solder Max. 350 oC for Max. 3sec, and only one time.
Symbol VF IV
CCT IR CRI
Condition IF = 20 mA IF = 20mA IF = 20mA
VR=5V IF = 20mA
Value 2.8 ~ 3.5 5.0 ~ 6.5 2580 ~ 3710
≤1 > 75
* VF measurement allowance is ±0.05V * Dominant wavelength measurement allowance is ±1nm * Luminous intensity is NIST reading. Luminous intensity tolerance: ±10%
1) Lead Solder
Classification Reflow Profile (JEDEC J-STD-020C)
Temperature (oC)
275
250
225
200
183 oC
175
150
125
100
75
50
25
0
50
Ramp up 3 oC/sec Max.
235-240oC 10sec.Max
Classification Reflow Profile (JEDEC J-STD-020C)
300
275
250
225
217 oC
200
175
150
125
100
75
50
25
0
50
Ramp up 3 oC/sec Max.
255-260oC 10sec.Max
60-150sec
Preheat 60-180sec
Soldering Reflow
-Soldering of the SMD LEDs should conform to the soldering condition in the individual specifications. -SMD LEDs are designed for Reflow Soldering. -In the reflow soldering, too high temperature and too large temperature gradient such as rapid
Page 4 of 15
Group Definition of Forward Voltage
Rank 1 2 3 4 5 6 7
Condition
Ta=25oC IF=20mA
VF(V) 2.8 ~ 2.9 2.9 ~ 3.0 3.0 ~ 3.1 3.1 ~ 3.2 3.2 ~ 3.3 3.3 ~ 3.4 3.4 ~ 3.5
0.4 0.3725
CD0WW0000-AG00/AG01
Page 6 of 15
Optical/Electronic Characteristics
Forward Current vs. Relative Luminosity
Preliminary Forward Current vs. Forward Voltage
Rank f4 f3 e1
x 0.4519 0.468 0.497 0.477 0.4255 0.439 0.468 0.4519 0.3897 0.3988 0.439 0.4255
y 0.4086 0.4385 0.4466 0.4137
0.4 0.431 0.4385 0.4086 0.3823 0.4116 0.431
Preliminary
Group Definition of Color Temperature
CCT Group
Condition
Min
Max
2700 K 3000 K 3500 K
Ta=25oC IF=20mA
2580 2870 3220
2870 3220 3710
*A shipment shall consist of the LEDs of a combination of different ranks of luminance intensity, wavelength and forward voltage. The percentage of each rank in the shipment shall be determined by AOT *The ranking information of LEDs can be found on the reel label.
MAKER Prepared Checked Approved
CUSTOMER
CD0WW0000-AG00/AG01
Page 1 of 15
Revision Note
Date 2010-12-31
Revision Initiate Document
Preliminary
Page 15
Version 1
Relative Luminosity (a.u)
2.5
2.0
1.5
1.0
0.5
0.0 0
10 20 30 40 50 60 Forward Current IFP (mA)
Forward Current IFP (mA)
60 50 40 30 20 10
0 0 0.5 1 1.5 2 2.5 3 3.5 4 Forward Voltage VF (V)
APPROVAL SHEET
ＴＥＬ：０７５５－２９１９ ３５１８； １３５ １０７１ ４９２６
AOT MODEL NAME AOT PART NUMBER CUSTOMER NAME DATE VERSION
White Color SMD LED CD0WW0000-AG00 CD0WW0000-AG01 General Customer 2010/December 1
Symbol IF IFP VR Tj Topr Tstg
ESD PD Tsபைடு நூலகம்d
Maximum Value
Unit
30
mA
100
mA
5
V
125
°C
-30 ~ +85
°C
-40 ~ +100
°C
±2000
V
105
mW
Reflow Soldering 260℃,10sec
CD0WW0000-AG00/AG01
Spectrum 100
Radiation Pattern
30 o
20 o
10 o
0o
1.0
Relative Emission Intensity (a.u.)
80
40 o
0.8
60
0.6
40
50 o
0.4
20
60 o
0
70 o
0.2
350 400 450 500 550 600 650 700 750 80 o
Preliminary
Unit V
mcd K µA
Absolute Maximum Ratings (Ta=25°C)
Item Forward Current Peak Pulse Forward Current; (1kHz,1/10 duty cycle) Reverse Voltage. LED Junction Temperature. Operating Temperature. Storage Temperature. Electrostatic Discharge(HBM) Power Dissipation Soldering Temperature
0.4
Rank f6 f5 e2
x 0.4355 0.4519 0.477 0.4588 0.4129 0.4255 0.4519 0.4355 0.3822 0.3897 0.4255 0.4129
y 0.3785 0.4086 0.4137 0.3838 0.3725
0.4 0.4086 0.3785 0.358 0.3823