DMCHA二甲基环已胺的中英文介绍

DMCHA二甲基环已胺

化学名称：N,N-二甲基环已胺。

简称：DMCHA

分子式：C8H17N

相对分子质量：127.23

结构式：

物化性能:

DMCHA常温为无色至浅黄色透明液体，能溶于醇及醚类溶剂，不溶于水。是强碱性叔胺化合物。它的沸程160~165℃,凝固点-60℃，密度（25℃）0.85~0.87g/cm3，折射率（20℃）1.4541~1.4550，闪点（闭环）40~41℃。蒸汽在空气中爆炸极限（体积分数）3.6~19.0%

N,N-二甲基环已胺的主要用途是作为硬质聚氨酯泡沫塑料的催化剂，用途广泛。用于冰箱硬泡、板材、喷涂、现场灌注聚氨酯硬泡。对硬泡的反应和凝胶反应提供较平衡的催化性能，它对水与异氰酸酯的反应（发泡反应）的催化更强，同时对多元醇与异氰酸酯的反应也有适中的催化性，这是泡沫反应的强初始催化剂。环已胺特别适合配制双组分体系，可溶解于许多硬泡多元醇及助剂中，在组合料中性能稳定，可调性大，并能长期存放。根据反应速度和泡沫物性的不同，加入量可在相应宽的范围内调节。

供应商

东莞市广思远聚氨酯材料有限公司

广思远®更多产品

ZF-10：高效低气味发泡催化剂，典型应用于制备低气味聚氨酯泡沫制品

ZR-50：低气味凝胶催化剂，提供优良的平衡性，可用于聚氨酯模塑高回弹泡沫Z-131：反应型低气味凝胶胺类催化剂复配剂

Z-130：低气味凝胶催化剂，平衡凝胶/发泡

ZR-70：低气味催化剂，用于包装泡沫和在乙烯基表皮上模塑泡沫发泡和凝胶平衡性好

ZR-40（五甲基二亚丙基二胺）：对冷模塑高回弹泡沫特别有效,低气味凝胶和发泡平衡较好的催化剂

LE-310：应用于大块海绵的低气味反应型凝胶催化剂，新型的低VOC胺凝胶催化剂,胺含量超过95%

LE-530：反应型凝胶催化剂，用于各种聚氨酯发泡产品

DPA：低气味凝胶催化剂，突出的平衡性和通用性提供良好的流动性

TAP 1-甲基-4-（2-二甲氨基乙基）哌嗪：卓越的三聚催化剂，可提高流动性DMDEE（2,2'-二吗啉二乙基醚）：强发泡催化剂,提供稳定的预聚物体系DMAEE：低密度全水硬质泡沫以及低密度半硬质泡沫

BDMAEE 双-(2-二甲氨基乙基)醚：高效发泡催化剂

BDMA（N,N-二甲基苄胺）：聚氨酯硬泡催化剂、环氧促进剂

DMEA（N,N'-二甲基乙醇胺）：在一些硬泡体系中中和酸,

PMDETA（五甲基二亚乙基三胺）：对HCFC/水发泡的硬泡特别有效,类似PC5

DMCHA

Chemical name: N, N-dimethylcyclohexamine.

Hereinafter referred to as: DMCHA

Molecular formula: C8H17N

Relative molecular weight: 127.23

Physical and chemical properties:

DMCHA is colorless to light yellow transparent liquid at room temperature, soluble in alcohols and ether solvents, insoluble in water. It is a highly basic tertiary amine compound. Its boiling range is 160~165℃, its freezing point -60℃, its density (25℃) is 0.85~0.87g/cm3, its refractive index (20℃) is 1.4541~1.4550, and its flash point (closed loop) is 40~41℃. The explosion limit (volume fraction) of steam in air is 3.6~19.0%

The main use of N, N-dimethylcyclohexamine is as a rigid polyurethane foam catalyst, widely used. Used for rigid foaming of refrigerator, plate, spraying, spot pouring polyurethane rigid foaming. It provides a more balanced catalytic performance for hard foam reaction and gel reaction. It is stronger for the reaction of water and isocyanate (foaming reaction), and it is also moderately catalytic for the reaction of polyols and isocyanate, which is a strong initial catalyst for foam reaction. Cyclohexamine is particularly suitable for the preparation of two-component systems, which can be dissolved in many hard foamed polyols and additives. It has stable properties in composite materials, large adjustable properties, and can be stored for a long time. The amount added can be adjusted in a wide range according to the reaction speed and physical properties of the foam.