OSPF 实验总结(虚连接)
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
OSPF Virtual-link 实验总结
使用3台路由器模拟实验，OSPF路由器进入FULL状态，路由生成。配置如下：
R1#sh ver
Cisco IOS Software, 3600 Software (C3640-JS-M), Version 12.4(17), RELEASE SOFTWA RE (fc1)
Technical Support: /techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 07-Sep-07 20:35 by prod_rel_team
ROM: ROMMON Emulation Microcode
ROM: 3600 Software (C3640-JS-M), Version 12.4(17), RELEASE SOFTWARE (fc1)
R1 uptime is 10 minutes
System returned to ROM by unknown reload cause - suspect boot_data[BOOT_COUNT] 0 x0, BOOT_COUNT 0, BOOTDATA 19
System image file is "tftp://255.255.255.255/unknown"
Cisco 3640 (R4700) processor (revision 0xFF) with 94208K/4096K bytes of memory. Processor board ID 00000000
R4700 CPU at 100MHz, Implementation 33, Rev 1.2
4 Ethernet interfaces
4 Serial interfaces
DRAM configuration is 64 bits wide with parity enabled.
125K bytes of NVRAM.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
R1#sh run
Building configuration...
Current configuration : 1501 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
!
!
ip cef
no ip domain lookup
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
ip address 200.17.1.1 255.255.255.0 !
interface Loopback1
ip address 100.1.64.4 255.255.255.255 ip ospf 1 area 2
!
interface Loopback2
ip address 100.1.64.5 255.255.255.255 ip ospf 1 area 2
!
interface Loopback3
ip address 100.1.64.6 255.255.255.255 ip ospf 1 area 2
interface Loopback4
ip address 100.1.64.7 255.255.255.255 ip ospf 1 area 2
!
interface Ethernet0/0
ip address 132.17.12.1 255.255.255.0 ip ospf authentication
ip ospf authentication-key sdx
full-duplex
!
interface Ethernet0/1
no ip address
shutdown
half-duplex
!
interface Ethernet0/2
no ip address
shutdown
half-duplex
!
interface Ethernet0/3
no ip address
shutdown
half-duplex
!
interface Serial1/0
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/1
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/3
no ip address
shutdown