WHB04 MACH3雕刻机无线电子手轮说明书

Update Driver for MPG wireless Mach 3
What do you mean by reinstall? I just have the ShuttlePro.dll that I copy to Mach3/Plugins.
It is the last one that you sent me here modified: 1/13/2012
If you work(zero) in a pocket/hole then you need to set the SAFE-Z so that the z-axis retracts before the others so that it does not crash.(see pic)
When it is enabled then any movement of the y-axis causes the z-axis to home.
When setting up for an undercut etc. it damages the tool and pulls the job out of the clamps as it goes up suddenly.
I have not tried the x-axis.:MACH3 PROBLEM
It still runs away every now and again -also when the pendant is switched on after Mach3 is started, or change from STEP to CONT in Mach3 with the mouse and changes are made to MOTOR TUNING. It also still stops the config menus from opening.
There are probably more problems but I try not to use it as it has cost me too many carbide cutters and material already
It is unsafe as there are just too many unexpected behaviours, I am just lucky that I have not damaged a machine yet.
Answer: xhc wireless tec Chengdu china
when enable safe high and”goto safez when stop button is hit”, our pendant will auto send stop button during reverse moving and switching band.so we advice you disable”goto safez when stop button is hit”.。